Parts Catalog Issued: Apr 10, Pronto M94 with SureStep

Transcription

1 Parts Catalog Issued: Apr 10, 2019 Pronto M94 with SureStep

2 Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for. If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. SYMBOL DEFINITION For Customer Service Support Call: For Faxed In Orders Call: or For Technical Service Call: Literature Can Be Found at: or Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. NOTE: NLA = Special Comments = General information pertaining to that specific page = No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers 2019 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., the Medallion Design, Pronto, and SureStep are registered trademarks and MKIV, MK5, NX, EX, SPJ, DPJ, MPJ, and M94 are trademarks of Invacare Corporation. 1

3 TABLE of CONTENTS Description Page Number A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!)... 5 Accessories - Oxygen Holder Assembly - A.S.B.A. Seats Accessories - Oxygen Holder Assembly - Van Seat Accessories - Power Wheelchair Tool Kit Accessories - Seat & Chest Positioning Straps Arms - Adjustable Height... 4 Arms - Fixed Height... 1 Arms - Van Seat... 6 Battery Chargers - Harnesses - Straps & Hardware... 7 Canes - Back - Spreader Bars & Attaching Hardware Caster & Forks... 4 Electronics - Auxillary Modules - AUX12 & AUX Electronics - Joystick Options Electronics - MK5 Controller - Cables - Programmer & Hardware Electronics - MK5 Display Electronics - MK5 DPJ Joystick & Mounting Hardware Electronics - MK5 MPJ Joystick & Mounting Hardware Electronics - MK5 SPJ+ Joystick & Mounting Hardware Electronics - MK5 SPJ-80 Joystick & Mounting Hardware Electronics - MK6i ~PLEASE READ Electronics - Proportional Attendant Control Joystick - PACM

4 TABLE of CONTENTS Description Page Number Electronics - Quad Link Assembly - QL (After 4/06/06) Electronics - Quad Link Assembly (Before 4/07/06) Electronics - R.I.M. Head Control Assembly Electronics - R.I.M. Head Control Mounting Hardware Electronics - Sip-N-Puff / Digital Interface M Electronics - Tash & Therafin Accessories Frame - Swing Arms & Stability Lock Hardware... 9 Frame - Swing Arms & Stability Lock Hardware - M94-M Frame Model Frame Finish - Shroud & Upholstery Colors... 6 Frames - Seat A.S.B.A. - Adapter & Hardware Frames - Seat Van & Attaching Hardware Front Riggings - Adjustable Angle Footplate Assemblies - AT Front Riggings - Adjustable Heel Loops Front Riggings - Footboard Assembly Front Riggings - Footrest & Legrest Accessories Front Riggings - Footrest Supports - Hemi - PHW Front Riggings - Front Rigging Hanger Assembly Front Riggings - Legrest Supports - Articulating - Hemi - PHAL4A Front Riggings - Legrest Supports - Hemi - PH904A Front Riggings - Pivot/Slide Tube & Footplates - PH904A & PHAL4A... 6 Front Riggings - Pivot/Slide Tube & Footplates - PHW

5 TABLE of CONTENTS Description Page Number Front Riggings - Reference Chart Motors & Gearboxes Packaging - Literature & Decals... 7 Seat - Release Hardware Seat Height Adjustment Slide Tubes Seat Pan & Hardware - A.S.B.A Seats - Van Shrouds - Front - Top - Rear & Attaching Hardware... 9 Shrouds - Side & Attaching Hardware Upholstery - Back - A.S.B.A. - Nylon Walking Beams & Hardware (After 10/0/05) Walking Beams & Hardware (Before 10/04/05)... 1 Warranty Replacement Parts Wheels - Drive Wheel Assembly

6 A: READ THIS FIRST (THIS CATALOG IS DIFFERENT!) 5

7 Frame Finish, Shroud and Upholstery Colors Frame Finish Color Number 4P Part Number NLA Bottle Size.6 oz. Color Flat Black Shroud Colors Color Number DBLM GBKM CRDM Color Dark Blue Pearl Magic Black Candy Red Pearl Upholstery Color Color Number U240 Color Black Nylon 6

8 Packaging, Literature and Decals 7

9 Packaging, Literature and Decals Item Number Note Part Number Description Quantity Per Package Assembly Carton, Tray Carton, Cover Carton, Corner Reinforcement X161 Insert, Plain Pad Bag, Poly (72" L x 5" W x 19" D) NLA NLA - Tube, Paper X01-NLA NLA - Warranty Card B NLA NLA - Instruction Manual, MK5 NX B NLA NLA - Instruction Manual, MK5 EX/ TT-EX 1 1 Electronics 9 B NLA NLA - Owner's Manual, Pronto M A NLA NLA - Plate, Name, Patent Numbers 1 1 NOTE: A - Not Shown B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. NOTE: When adjusting or replacing parts, please refer to your Owner's Manual for reference. 8

10 Frame, Swing Arms, and Stability Lock Hardware 9

11 Frame, Swing Arms, and Stability Lock Hardware Item Number Note Part Number Description Quantity Per Package Assembly NLA NLA - Frame w/o Hardware, Black 1 1 C NLA NLA - Plate, Name, Patent Numbers Ring, Tolerance Bearing, Flange (1/2 x 1/16 x 1/2") A Swing Arm Assembly, Rear, Black - Right A Swing Arm Assembly, Rear, Black - Left NLA NLA - Washer, Nylon (5/64 x 1 x 1/16") NLA NLA - O-Ring (19/2" I.D. x 9/64") NLA NLA - Washer, Cupped (1/4 x 1 x 5/2") Locknut (1/4-20) NLA NLA - Fastener, Hook with Adhesive Back (1" W x 1 4 1" L) Rack, Pivot X006 Bearing (5/8") NLA NLA - Fastener, Turn, Clip-On (1/4") Locknut (5/16-18) NLA NLA - Locknut, High Profile (/8-16) Screw, Shoulder Hex Socket Head w/ Patch (/8" x 1 2 /8", 5/16-18) NLA NLA - Screw, Shoulder Hex Socket Head (1/2 x 1 2-1/2", /8-16) Link, Pivot, Black - Right Link, Pivot, Black - Left NLA NLA - Screw, Cap, Button Head, Socket (1/4-20 x 1 2 1") NLA NLA - Screw, Socket Flat Head w/ Patch (1/4-20 x 1 4 /4") NLA NLA - Bumper, Rear Swing Arm NLA NLA - Screw, Phillips Pan Head (#10-16 x 5/8") B NLA NLA - Hardware, Stability Lock 1 1 NOTE: A - Includes Swing Arm plus items 2,, & 11 B - Includes items 2-21 C - Not Shown 10

12 Frame, Swing Arms, and Stability Lock Hardware M94-M Base Frame Model For Powered Seating 11

13 Frame, Swing Arms, and Stability Lock Hardware M94-M Base Frame Model For Powered Seating Item Number Note Part Number Description Quantity Per Package Assembly 1 C NLA NLA - Frame w/o Hardware and Battery Tray, Black 1 1 (M94-M) D NLA NLA - Plate, Name, Patent Numbers Ring, Tolerance Bearing, Flange (1/2 x 1/16 x 1/2") A Swing Arm Assembly, Rear, Black - Right A Swing Arm Assembly, Rear, Black - Left NLA NLA - Washer, Nylon (5/64 x 1 x 1/16") NLA NLA - O-Ring (19/2" I.D. x 9/64") NLA NLA - Washer, Cupped (1/4 x 1 x 5/2") Locknut (1/4-20) NLA NLA - Fastener, Hook with Adhesive Back (1" W x 1 4 1" L) Rack, Pivot X006 Bearing (5/8") NLA NLA - Fastener, Turn, Clip-On (1/4") Locknut (5/16-18) NLA NLA - Locknut, High Profile (/8-16) Screw, Shoulder Hex Socket Head w/ Patch (/8" x 1 2 /8", 5/16-18) NLA NLA - Screw, Shoulder Hex Socket Head (1/2 x 1 2-1/2", /8-16) Link, Pivot, Black - Right Link, Pivot, Black - Left NLA NLA - Screw, Cap, Button Head, Socket (1/4-20 x 1 2 1") NLA NLA - Screw, Socket Flat Head w/ Patch (1/4-20 x 1 4 /4") NLA NLA - Bumper, Rear Swing Arm NLA NLA - Screw, Phillips Pan Head (#10-16 x 5/8") B NLA NLA - Hardware, Stability Lock C NLA NLA - Tray, Battery 1 1 NOTE: A - Includes Swing Arm plus items 2,, & 11 B - Includes items 2-21 C - M94-M Frame is NLA. For replacement frame order part no (Frame w/ Battery Tray). D - Not Shown 12

14 SureStep Walking Beams and Hardware Before 10/04/05 1

15 SureStep Walking Beams and Hardware Before 10/04/05 Item Number Note Part Number Description Quantity Per Package Assembly NLA NLA - Screw, Socket Head Shoulder (1/2 x -/4", 1 1 /8-16) Spring, Torsion - Right Spring, Torsion - Left Spacer, Spring, Black Locknut (5/8-18) NLA NLA - Spacer, Bushing NLA NLA - Bumper, Rubber (1" Diameter x 5/8") Plate, Lock Spacer, Stem (5/8 x 1-1/8 x /16") Locknut, Low Profile (/8-16) NLA NLA - Washer, Steel (7/16 x 1/16 x 1/8") NLA - Nut, Keps (5/16-18) A NLA NLA - Hardware, Walking Beam Mounting, 1 1 SureStep- Right 12 A NLA NLA - Hardware, Walking Beam Mounting, 1 1 SureStep - Left 1 B Beam, Walking with Hardware - Right B Beam, Walking with Hardware - Left C Screw, Shoulder Hex Socket Head (5/16" x /8", 1 2 1/4-20) Washer, Flat (5/16 x 5/8 x 1/16") Bearing, Flange (1/2 x 1/16 x 1/2") Spring, Compression (11/2 x 1 x 1/2") Rack, Motor 1 1 NOTE: A - Includes items 1-11 B - Includes items C - Includes item 17 14

16 SureStep Walking Beams and Hardware After 10/0/05 15

17 SureStep Walking Beams and Hardware After 10/0/05 Item Number Note Part Number Description 1 A A B 20 B Quantity Per Package Assembly Kit, Walking Beam Mounting Hardware - Right 1 1 NLA - Screw, Socket Head Shoulder (1/2 x -/4", 1 1 /8-16) Spring, Torsion - Right 1 1 Spacer, Spring, Black 1 1 Screw, Allen Head (1/4-20 x 1") 1 1 Spacer (1/4 x /4 x 1/2") 1 1 Locknut (1/4-20) 1 1 NLA - Bumper, Rubber (1" Diameter x 5/8") 1 2 NLA - Nut, Keps (5/16-18) 1 1 NLA - Washer, Steel (7/16 x 1/16 x 1/8") 1 1 Locknut, Low Profile (/8-16) 1 1 Spacer, Stem (5/8 x 1-1/8 x /16") 1 1 Plate, Pivot 1 1 Spring, Torsion - Right 1 1 NLA - Washer, Steel (/8 x 7/8 x 1/16") 1 2 NLA - Screw, Shoulder Hex Socket Head (/8 x 1 1 /4", 5/16-18) Spring, Extension (1 x 4-1/2" L) 1 1 NLA - Spacer, Bushing 1 1 Locknut (5/8-18) Kit, Walking Beam Mounting Hardware - Left 1 1 NLA - Screw, Socket Head Shoulder (1/2 x -/4", 1 1 /8-16) Spring, Torsion - Left 1 1 Spacer, Spring, Black 1 1 Screw, Allen Head (1/4-20 x 1") 1 1 Spacer (1/4 x /4 x 1/2") 1 1 Locknut (1/4-20) 1 1 NLA - Bumper, Rubber (1" Diameter x 5/8") 1 2 NLA - Nut, Keps (5/16-18) 1 1 NLA - Washer, Steel (7/16 x 1/16 x 1/8") 1 1 Locknut, Low Profile (/8-16) 1 1 Spacer, Stem (5/8 x 1-1/8 x /16") 1 1 Plate, Pivot 1 1 Spring, Torsion - Left 1 1 NLA - Washer, Steel (/8 x 7/8 x 1/16") 1 2 NLA - Screw, Shoulder Hex Socket Head (/8 x 1 1 /4", 5/16-18) Spring, Extension (1 x 4-1/2" L) 1 1 NLA - Spacer, Bushing 1 1 Locknut (5/8-18) Beam, Walking with Hardware - Right Beam, Walking with Hardware - Left

18 SureStep Walking Beams and Hardware After 10/0/05 Item Number Note Part Number Description Quantity Per Package Assembly 21 C Kit, Walking Beam Hardware - Right/Left Bearing, Flange (1/2 x 1/16 x 1/2") Screw, Shoulder Hex Socket Head (5/16" x /8", 1 2 1/4-20) 24 Washer, Flat (5/16 x 5/8 x 1/16") Spring, Compression (11/2 x 1 x 1/2") Rack, Motor Nut, Weld Spacing (1/4-20 x 2") Bracket, Spring - Right Bracket, Spring - Left Screw, Hex Head (1/4-20 x 5/8") D NOTE: A - Includes items 2-19 B - Includes Walking Beam plus item 21 C - Includes items D - Includes Pivot Tube and item 22 17

19 Seat Frame, Adapter and Hardware - A.S.B.A. 18

20 Seat Frame, Adapter and Hardware - A.S.B.A. #1 Seat Frame Assembly Chair Width 16"-17" Deep 18"-19" Deep 20"-21" Deep 22" Deep 18" Wide NLA NLA NLA NLA 19" Wide NLA NLA NLA NLA 20" Wide NLA NLA NLA NLA 21" Wide NLA NLA NLA NLA 22" Wide NLA NLA NLA NLA 2" Wide NLA NLA NLA NLA 24" Wide NLA NLA NLA NLA Item Number Note Part Number Description Quantity Per Package Assembly See Chart #1 Seat Frame Assembly NLA NLA - Screw, Hex Head w/ Patch (5/16-18 x 2-1/2") Locknut (5/16-18) Adapter, Seat Frame Pin, Arm Lock, Black X074 Spring, Arm Lock Kit, Lock Handle w/rivets (Pair) Plug Button, Black (1")

21 Seat Pan and Hardware - A.S.B.A. Item Number Note Part Number Description Quantity Per Package Assembly 5 A NLA NLA - Kit, Seat Pan Mounting Hardware Screw, Hex Head (1/4-20 x 1-5/8") Screw, Hex Head (1/4-20 x 1-1/2") 1 4 Spacer (1/4 x /8 x /16") Locknut (1/4-20) NLA NLA - Fastener, Hook Adhesive Back (2" W x 16" L) NLA NLA - Fastener, Loop Adhesive Back (2" W x 16" L) See Chart #7 Seat Pan 1 1 NOTE: A - Includes Items

22 Seat Pan and Hardware - A.S.B.A. #7 Seat Pan Chair Width 18" Wide 19" Wide 20" Wide 21" Wide 22" Wide 2" Wide 24" Wide 16" Deep 17" Deep 18" Deep 19" Deep 20" Deep 21" Deep 22" Deep NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA NLA 21

23 Van Seat Assembly NOTE: Captain seats recline approximately degrees. NOTE: Recline release levers are standard on the right side. Left side release levers can be ordered as a special with a new captain seat. Item Number Not Shown Not Shown Not Shown Backrest and Van Seat Assemblies Backrest For Semi-Recline 18" W Semi-Recline w/ Backrest See Note(s) A 20" W Semi-Recline w/ Backrest See Note(s) B 22" W Semi Recline w/ Backrest See Note(s) C 24" W Semi Recline w/ Backrest See Note(s) C Hinge Bracket w/ Lever Semi-Recline - Right Hinge Bracket w/o Lever Semi-Recline - Left Screw, Phillips Truss Head (1/4-20 x /4") 22 All Grey Vinyl See Note(s) A See Note(s) B See Note(s) B See Note(s) C See Note(s) D See Note(s) D See Note(s) E

24 Van Seat Assembly NOTE: Captain seats recline approximately degrees. NOTE: Recline release levers are standard on the right side. Left side release levers can be ordered as a NOTE: special with a new captain seat. A - Seat depths are adjustable; 16, 17, and 18" B - Seat depths are adjustable; 18, 19, and 20" C - Seat depths are adjustable; 20, 21, and 22" D - Not Shown. Hinge Brackets used for ALL Semi-Recline Seat models only. For attaching Hinge Bracket, see part number E - Not shown, Screw for Hinge Bracket(s) and Total of (7) required for each Bracket. 2

25 Van Seat Frame and Attaching Hardware Item Number Note Part Number Description Quantity Per Package Assembly Frame, Van Seat, Black (18" W) Frame, Van Seat, Black (20" W) Frame, Van Seat, Black (22" W) Frame, Van Seat, Black (24" W) NLA NLA - Screw, Hex Head w/ Patch (1/4-20 x 1-1/4") Washer (1/4 x 2/2 x 1/16") Screw, Hex Head w/ Patch (1/4-20 x 2") Plug Button, Black (1") Spacer (1/4 x 5/8 x 1/4") A Hardware, Van Seat Mounting 1 1 NOTE: A - Includes items

26 Seat Height Adjustment Slide Tubes Item Number Note Part Number Description Quantity Per Package Assembly 1 A NLA NLA - Kit, Front/Rear Slide Tube w/ Hardware, Seat 1 1 Height Adjustment (Pair) NLA NLA - Slide Tube, Seat Height Adjustment - Rear B NLA NLA - Slide Tube Assembly, Seat Height 1 2 Adjustment, Rear Screw, Socket Head (5/16-18 x 1-1/2") Locknut (5/16-18) NLA NLA - Slide Tube Assembly, Seat Height Adjustment, Front 1 2 NOTE: A - Includes Items 2-5 B - When replacing a "Slide Tube, Seat Height Adjustment - Rear" part # with the part # both sides must be replaced simultaneously. 25

27 Seat Release Hardware (For Van Seat and A.S.B.A. Seat) Item Number Note Part Number Description Quantity Per Package Assembly 1 A Kit, Seat Release Hardware NLA NLA - Spring, Torsion - Right NLA NLA - Spring, Torsion - Left NLA NLA - Pin, Slotted (1/4 x 1-1/8") NLA NLA - Latch Bar, Seat, Black 1 1 NOTE: A - Includes items

28 Back Canes, Spreader Bars and Attaching Hardware 27

29 Back Canes, Spreader Bars and Attaching Hardware Item Number Note Part Number Description Quantity Per Package Assembly 1 See Chart #1 10 Back Cane with Grip (16-20" Back Height) See Chart #2 Spreader Bar (18-20" Wide) See Chart #2 Spreader Bar (21-24" Wide) Package, Foam Hand Grip (9" L) Package, Plug Button, Black (7/8") A NLA NLA - Kit, Back Cane Attaching Hardware Screw w/ Lug (5/16-24 x 1-/8") Insert, Non-Threaded Back Cane 1 2 (For Back Heights 20" and Lower) 8 Screw, Hex Head (1/4-20 x 1-5/8") Washer (1/4 x 2/2 x 1/16") Locknut (1/4-20) Spacer, Coved (1/4 x 11/16 x 1/2") Locknut (5/16-24) 1 2 NOTE: A - Includes Items 6-12 #1 10 Back Cane with Grip 16-20" Back Height 16" High 17" High 18" High 19" High 20" High NLA #2 Spreader Bar 18-20" Wide 18" Wide 19" Wide 20" Wide #2 Spreader Bar 21-24" Wide 21" Wide 22" Wide 2" Wide 24" Wide NLA NLA NLA NLA 28

30 A.S.B.A. Back Upholstery, Nylon Back Upholstery w/ Dual Liners Back Width 16"-17" High 18"-19" High 20" High 18" Wide " Wide " Wide " Wide " Wide " Wide NLA NLA NLA 24" Wide NLA NLA NLA 29

31 Item Number Note Part Number Description NOTE: A.S.B.A. Back Upholstery, Nylon Back Upholstery Hardware Quantity Per Package Assembly A Package, Screw with Washer (#10 x 7/8") (Pair) 2 1 A 98007X005 Tie Wrap (11-1/2" L) 1 2 A A - Not Shown See Chart Back Upholstery w/ Dual Liners 1 1 0

32 Arms - Fixed Height 1

33 Item Number Note Part Number Description 1 A 1 A 1 A 1 A 1 A 1 A 1 A 1 A 2 C 2 2 C Arms - Fixed Height Quantity Per Package Assembly NLA NLA - Arm Assembly, Desk Length, Black - Right (16-19"D) NLA NLA - Arm Assembly, Desk Length, Black - Left 1 1 (16-19"D) NLA NLA - Arm Assembly, Desk Length, Black - Right 1 1 (Long) (20" and Deeper) NLA NLA - Arm Assembly, Desk Length, Black - Left 1 1 (Long) (20" and Deeper) NLA NLA - Arm Assembly, Full Length, Black - Right 1 1 (16-19" D) NLA NLA - Arm Assembly, Full Length, Black - Left 1 1 (16-19" D) NLA NLA - Arm Assembly, Full Length, Black - Right 1 1 (Long) (20" and Deeper) NLA NLA - Arm Assembly, Full Length, Black - Left 1 1 (Long) (20" and Deeper) Kit, Arm Pad w/ Screws, Full Length, Urethane 1 1 Waterfall, Black (1" L x 2-5/8" W) Kit, Arm Pad w/ Screws, Full Length, Urethane 2 1 Waterfall, Black (1" L x 2-5/8" W) (Pair) Kit, Arm Pad w/ Screws, Desk Length, Urethane 1 1 Waterfall, Black (9" L x 2-5/8" W) Kit, Arm Pad w/ Screws, Desk Length, Urethane 2 1 Waterfall, Black (9" L x 2-5/8" W) (Pair) Tube, Arm, Desk Length, Black - Right (16-19" D) NLA NLA - Tube, Arm, Desk Length, Black - Left (16-19" 1 1 D) NLA NLA - Tube, Arm, Desk Length, Long, Black - Right 1 1 (20" and Deeper) NLA NLA - Tube, Arm, Desk Length, Long, Black - Left 1 1 (20" and Deeper) Tube, Arm, Full Length, Black - Right (16-19"D) NLA NLA - Tube, Arm, Full Length, Black - Left ( "D) NLA NLA - Tube, Arm, Full Length, Long, Black - Right 1 1 (20" and Deeper) NLA NLA - Tube, Arm, Full Length, Long, Black - Left 1 1 (20" and Deeper) Grip, Foam Hand (9" L) Screw, Phillips Pan Head Tap (#8-2 x /8") NLA NLA - Guard, Clothing, Desk Length NLA NLA - Guard, Clothing, Full Length (16-19" D) NLA NLA - Guard, Clothing, Full Length (20" and 1 1 Deeper) Cover, Clothing Guard w/ Pocket, FXDESK & 1 1 ADJFULL/ADJDESK 2

34 Item Number Note Part Number Description Arms - Fixed Height Quantity Per Package Assembly Cover, Clothing Guard with Pocket Fixed Height Full 1 1 Length (20" and Deeper) Package, Screw, Phillips Pan Head (#10-2 x /4") Plug, Pivot Plug Button, Black (5/8") Locknut (1/4-20) Clevis, Pivot Screw, Socket Button Head (1/4-20 x 1-5/8") Pin, Pull B Kit, Swingaway Armrest Mounting Hardware 1 1 NOTE: A - Includes items -6, 8-10 B - Includes items C - After 7/9/07 Invacare recommends ordering armpads in pairs to assure uniform appearance on chair

35 Arms - Adjustable Height 4

36 Item Number Note Part Number Description Arms - Adjustable Height Quantity Per Package Assembly 1 C Kit, Arm Pad w/ Screws, Full Length, Urethane 1 1 Waterfall, Black (1" L x 2-5/8" W) Kit, Arm Pad w/ Screws, Full Length, Urethane 2 1 Waterfall, Black (1" L x 2-5/8" W) (Pair) 1 C Kit, Arm Pad w/ Screws, Desk Length, Urethane 1 1 Waterfall, Black (9" L x 2-5/8" W) Kit, Arm Pad w/ Screws, Desk Length, Urethane 2 1 Waterfall, Black (9" L x 2-5/8" W) (Pair) Arm Tube Assembly w/ Plug Buttons, Full Length, 1 1 Black - Right/Left Arm Tube Assembly w/ Plug Buttons, Desk Length, 1 1 Black - Right/Left Plug Button, Black (7/8") Package, Screw, Phillips Pan Head (#10-2 x /4") Guard, Clothing X074 Spring, Arm Lock Pin, Arm Lock, Black Grip, Foam Hand (9" L) Kit, Lock Handle w/rivets (Pair) Rivet Plug, Pivot Plug Button, Black (5/8") A Arm Base Assembly, Black - Right (16-19" D) A Arm Base Assembly, Black - Left (16-19" D) A Arm Base Assembly, Black - Right (20" and Deeper) A Arm Base Assembly, Black - Left (20" and Deeper) Cover, Clothing Guard w/ Pocket, FXDESK & 1 1 ADJFULL/ADJDESK Locknut (1/4-20) Clevis, Pivot Screw, Socket Button Head (1/4-20 x 1-5/8") Pin, Pull B Kit, Swingaway Armrest Mounting Hardware 1 1 NOTE: A - Includes items 5-12 B - Includes items C - After 7/9/07 Invacare recommends ordering armpads in pairs to assure uniform appearance on chair 5

37 Arms - Van Seat 6

38 Item Number Note Part Number Description 1 A 1 A 1 A 1 A 2 B B C 17 C 17 C 17 C Arms - Van Seat Quantity Per Package Assembly Arm Assembly, Adjustable Height Full Length, Black - Right Arm Assembly, Adjustable Height Full Length, Black Left Arm Assembly, Adjustable Height Desk Length, 1 1 Black - Right Arm Assembly, Adjustable Height Desk Length, 1 1 Black - Left Upper Arm Assembly, Desk Length (Right/Left) 1 1 Arm Pad, Desk Length, Black Urethane (12-1/4" L x /8" W) Screw, Socket Head w/ Patch (5/16-18 x 1-/4") 1 1 Washer, Flat (5/16 x 5/8 x 1/16") 1 2 Locknut (5/16-18) 1 1 Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") 1 1 NLA - Nut, Hex (5/16-18) 1 1 Tube, Arm, Upper Adjustable Height, Black Upper Arm Assembly, Full Length (Right/Left) 1 1 Arm Pad, Full Length, Urethane, Black (15" L x /8" W) Screw, Socket Head w/ Patch (5/16-18 x 1-/4") 1 1 Washer, Flat (5/16 x 5/8 x 1/16") 1 2 Locknut (5/16-18) 1 1 Screw, Hex Head w/ Patch (5/16-18 x 1-1/4") 1 1 NLA - Nut, Hex (5/16-18) 1 1 Tube, Arm, Upper Adjustable Height, Black Arm Pad, Desk Length, Black Urethane (12-1/4" L x /8" W) Arm Pad, Full Length, Urethane, Black (15" L x /8" W) Knob, Adjustment, Black (5/16-18 x /4") Handle, Release, Black (5/16-18 x 1/2") Tube, Arm, Lower Adjustable Width, Black - Right Tube, Arm, Lower Adjustable Width, Black - Left Arm Assembly, Fixed Height Full Length, Black Right Arm Assembly, Fixed Height Full Length, Black Left Arm Assembly, Fixed Height Desk Length, Black Right Arm Assembly, Fixed Height Desk Length, Black Left NLA NLA - Tube, Arm, Fixed Height, Black - Right NLA NLA - Tube, Arm, Fixed Height, Black - Left 1 1 7

39 NOTE: A - Includes items B - Includes items - 9. C - Includes items - 8, 11, and item 18. Arms - Van Seat 8

40 Front, Top, and Rear Shrouds and Attaching Hardware 9

41 Front, Top, and Rear Shrouds and Attaching Hardware Item Number Note Part Number Description Quantity Per Package Assembly Decal, Invacare -D Logo (2-1/2" L) NLA NLA - Stud, Wing Head (1" Long) NLA NLA - Spring, Torsion Ejector NLA NLA - Washer, Nylon Cupped (9/2 x 19/2 x /2") NLA NLA - Washer, Nylon Retainer (1/4 x 1/2 x 1/2") A Shroud with Hardware - Front NLA NLA - Fastener, Loop with Adhesive Back (1" W x 1 4 2" L) Decal, Warning Pinch Point D NLA NLA - Label, Warning Wiring Dual, 22NF Battery Decal, Transportation B Shroud, Top w/ Decals Washer, Flat (/16 x 5/8 x 1/16") Screw, Slotted Hex Washer Head (#10-2 x 5/8") C Kit, Shroud w/ Hardware, Rear, Candy Red Pearl C Kit, Shroud w/ Hardware, Rear, Magic Black C Kit, Shroud w/ Hardware, Rear, Dark Blue Pearl 1 1 NOTE: A - Includes Shroud plus items 1-5 B - Includes Shroud plus items 7-10 C - Includes Shroud plus items 1, 12, and 1 D - Part # is no longer available as a service part individually. Order item 11 as a replacement. 40

42 Side Shrouds and Attaching Hardware 41

43 Side Shrouds and Attaching Hardware Item Number Note Part Number Description Quantity Per Package Assembly Decal, Drive/Push Screw, Slotted Hex Washer Head (#10-2 x 5/8") Washer, Flat (/16 x 5/8 x 1/16") Screw, Phillips Pan Head (#8-16 x 5/8") Screw, Phillips Pan Head Tap (#10-2 x 1/2") 1 8 A Kit, Side Shroud Hardware NLA NLA - Decal, Model - Pronto M Screw, Phillips Pan Head Tap (#10-2 x 1/2") NLA NLA - Bracket, Fender Mounting, Black - Right NLA NLA - Bracket, Fender Mounting, Black - Left B,C Shroud, Side w/ Decals, Candy Red Pearl - Right B,C Shroud, Side w/ Decals, Candy Red Pearl - Left B Shroud, Side w/ Decals, Magic Black - Right B Shroud, Side w/ Decals, Magic Black - Left B Shroud, Side w/ Decals, Dark Blue Pearl - Right B Shroud, Side w/ Decals, Dark Blue Pearl - Left Shroud, Front Inner - Right Shroud, Front Inner - Left 1 1 NOTE: A - Not Shown. Includes items 2-5. B - Includes Decals, items 1 & 6. C - Due to a supplier change it is recommended to order the right and left Side Shrouds to match in color shade for wheelchairs manufactured before 1//12. 42

44 Casters, Forks and Hardware 4

45 Item Number Note Part Number Description Casters, Forks and Hardware Quantity Per Package Assembly Cap, Head Tube, Black Locknut (5/8-18) Washer, Nylon (5/8 x 1-5/16 x 1/8") X006 Bearing (5/8") Ring, Tolerance Spacer, Stem (5/8 x 1-1/8 x /16") Fork and Stem, 2-Sided - Right/Left A Kit, Caster Mounting Hardware Locknut (7/16-20) Washer, Steel (15/2 x 5/8 x /64") Screw, Hex Head (7/16-20 x -1/4") B Kit, Caster Headtube with Hardware - Right Screw, Socket Button Head Cap (/8-24 x /4") Bushing, Pivot Head Tube Cap, Head Tube - Right Headtube Assembly with Bearings, Black - Right B Kit, Caster Headtube with Hardware - Left Screw, Socket Button Head Cap (/8-24 x /4") Bushing, Pivot Head Tube Cap, Head Tube - Left Headtube Assembly with Bearings, Black - Left Screw, Socket Button Head Cap (/8-24 x /4") Bushing, Pivot Head Tube Cap, Head Tube - Right Cap, Head Tube - Left C Headtube Assembly with Bearings, Black - Right C Headtube Assembly with Bearings, Black - Left Wheel Assembly, Semi-Pneumatic, Urethane, Deep 1 1 Profile, Grey Tire/Black Hub (6" x 2") Wheel Assembly, Semi-Pneumatic, Urethane, Deep Profile, Grey Tire/Black Hub (6" x 2") (Pair) 2 1 NOTE: A - Includes Items 9-11 B - Includes Items 1-16 C - Includes Items 4 and 5 44

46 Motor and Gearbox Assembly 45

47 Item Number Note Part Number Description Motor and Gearbox Assembly Quantity Per Package Assembly 1 A,E Motor/Gearbox Assembly with Brake Cap - Right A,E E WARR RPLMT - Motor/Gearbox Assembly with 1 1 Brake Cap - Right 1 A,E Motor/Gearbox Assembly with Brake Cap - Left A,E E WARR RPLMT - Motor/Gearbox Assembly with 1 1 Brake Cap - Left 2 B Motor Assembly - Right B Motor Assembly - Left 1 1 D NLA NLA - Gearbox - Right 1 1 D NLA NLA - Gearbox - Left NLA NLA - Cover, Brake w/ Screws, Black G NLA NLA - Kit, Brake Repair - Right G NLA NLA - Kit, Brake Repair - Left F Kit, Brushes with Caps, 4 Pole 1 1 Brush, Motor, 4 Pole 1 4 Cap, Brush 1 4 Instruction Sheet X007 Coupling w/ Cup (1-5/16" Diameter) NLA NLA - Cap, End, Brake, Black NLA NLA - Plate, Slotted D Screw, Socket Head (M6 x 1 x 20mm) D Screw, Socket Head (1/4-20 x 1-1/8") X001-NLA NLA - Lockwasher (1/4") Screw, Socket w/ Patch (M6 x 1 x 20mm) NLA NLA - Screw, Socket w/ Patch (M6 x 1 x 5mm) NLA NLA - Plate, Motor/Gearbox Mounting - Right NLA NLA - Plate, Motor/Gearbox Mounting - Left Pin, Motor Release 1 2 C NLA NLA - Wrap, Slit Wire Harness (1/2" O.D., 6" Long Cut To Length) 1 1 NOTE: A - Includes items -11. B - Includes items 4-6 and C - Not Shown, covers the motor lead wire between the connector and motor. D - When a new gearbox or mounting screws are ordered, (2 ea.) metric and (2 ea.) non-metric screws (item 10) must be ordered. Invacare Corp. utilizes alternate suppliers for this part number. E - As of May 2008, the Metal Motor End Cap will be replaced with a Composite Motor End Cap. The change does not affect form, fit, function or aesthetics. F - Kit includes (4) Brushes, (4) Brush Caps and Instruction Sheet. G - Use existing screws when installing the Brake Repair Kit. The Motor Brake Mounting Screws are not saleable. 46

48 Drive Wheel Assembly 47

49 Item Number Note Part Number Description Drive Wheel Assembly Quantity Per Package Assembly 1 A Drive Wheel Assembly, Flat Free, Grey Tire/Silver 1 1 Rim (14 x ") 1 A Drive Wheel Assembly, Flat Free, Grey Tire/Silver 2 1 Rim (14" x ") (Pair) 2 B NLA NLA - Kit, 8" Rim w/ Hardware (14 x " Wheel) Tire w/ Foam Fill Insert, Grey (14" x ") Tire w/ Foam Fill Insert, Grey (14" x ") (Pair) Nut, Beveled Hex (5/16-24) Locknut (1/2-20) Hub, Wheel Washer (1/2 x 1-9/2 x 1/8") Key (/16 x 1-1/4") C Kit, Drive Wheel Mounting Hardware (14" x ") 1 1 NOTE: A - Includes items 2-4 B - Sold complete. Sold complete. Includes the Rims and (5) ea. Socket Head Screws w/ Patch (5/16-18 x 7/8"). C - Includes items

50 Footboard Assembly 49

51 Item Number Note Part Number Description Footboard Assembly Quantity Per Package Assembly Pin, Quick Release Plug Button, Black (1" Square) Bracket, Footboard Support, Black Bracket, Footboard Support, Black (2" Extension) Washer, Nylon (/8 x /4 x 1/16") Locknut (5/16-18) Screw, Set Socket Flat Point (5/16-18 x 1") Washer, Flat (/8 x 11/16 x 1/16") Screw, Socket Head (/8-16 x 2-1/2") Bushing (/8 x 5/8 x 1/2") Locknut, Low Profile (/8-16) Footboard w/ Cover (11-1/4" W x 11-1/2" L) A Footboard Assembly A Footboard Assembly with 2" Extension B,C,D Kit, 2" Footboard Extension Plug Button, Black (1" Square) 1 1 Bracket, Footboard Support, Black (2" Extension) Washer, Nylon (/8 x /4 x 1/16") Washer, Flat (/8 x 11/16 x 1/16") Screw, Socket Head (/8-16 x 2-1/2") Bushing (/8 x 5/8 x 1/2") Locknut, Low Profile (/8-16) 1 1 NLA - Bag, Zip-Lip (4" L x 4" W) 1 1 NLA - Instruction Sheet, 2" Footboard Extension 1 1 Carton, Shipper 1 1 NOTE: A - Includes items 1-11 B - Includes items 2-4, 7-10 plus instruction sheet C - Bag, Instruction Sheet, and Carton are not shown D - Part number is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 50

52 Front Rigging Assembly Reference Chart Support Assemblies Front Rigging Black Right PHW9 Footrests See Note(s) A PH904A Legrests See Note(s) A PHAL4A Articulating N/A Legrests NOTE: A - Support finish is 4P, Flat Black. Black Left See Note(s) A See Note(s) A N/A Chrome Right N/A N/A Chrome Left N/A N/A PHW9 Pivot Slide Tubes with Footplates Chair Width Aluminum (1650) Deluxe Aluminum (1450) 18-22" Wide Right NLA 18-22" Wide Left NLA 2-24" Wide Right NLA 2-24" Wide Left NLA NOTE: Pivot/ Slide Tube Mounting Hardware is Not Included. Extra Large Aluminum (150) Adjustable Angle (AT554) NLA NLA 51

53 Front Rigging Assembly Reference Chart PHW9 (2" and 4" Longer) Pivot Slide Tubes with Footplates Footplate Type Aluminum (1650) 2" Longer Aluminum (1650) 4" Longer Extra Large Aluminum (150) 2" Longer Extra Large Aluminum (150) 4" Longer Adjustable Angle (AT554) 2" Longer Adjustable Angle (AT554) 4" Longer 18-22" Wide Right NLA NLA NOTE: Pivot/ Slide Tube Mounting Hardware is not Included " Wide Left NLA NLA " Wide Right NLA NLA NLA NLA 2-24" Wide Left NLA NLA NLA NLA PH904A Pivot Slide Tubes with Footplates Chair Width 18-22" Wide Right 18-22" Wide Left 2-24" Wide Right 2-24" Wide Left Aluminum (1650) NOTE: Pivot/ Slide Tube Mounting Hardware is Not Included. Deluxe Aluminum (1450) NLA NLA NLA NLA Extra Large Aluminum (150) Adjustable Angle (AT554) NLA NLA 52

54 Front Rigging Assembly Reference Chart PH904A (2" and 4" Longer) Pivot Slide Tubes with Footplates Footplate Type Aluminum (1650) 2" Longer Aluminum (1650) 4" Longer Extra Large Aluminum (150) 2" Longer Extra Large Aluminum (150) 4" Longer Adjustable Angle (AT554) 2" Longer Adjustable Angle (AT554) 4" Longer 18-22" Wide Right NLA NLA NLA NLA NOTE: Pivot/ Slide Tube Mounting Hardware is not Included " Wide Left NLA NLA NLA NLA " Wide Right NLA NLA NLA NLA NLA NLA 2-24" Wide Left NLA NLA NLA NLA NLA NLA PHAL4A Pivot Slide Tubes with Footplates Chair Width 18-22" Wide Right 18-22" Wide Left 2-24" Wide Right 2-24" Wide Left Aluminum (1650) NOTE: Pivot/ Slide Tube Mounting Hardware is Not Included. Deluxe Aluminum (1450) NLA NLA NLA NLA Extra Large Aluminum (150) Adjustable Angle (AT554)

55 Legrest Support Assembly - PHW9 Black 54

56 Legrest Support Assembly - PHW9 Black Item Number Note Part Number Description Quantity Per Package Assembly Anti-Rattle, Black Screw, Phillips Pan Head (#10-2 x 11/16") X057 Bushing (7/2 x /8 x 11/2") Locknut (#10-2) Screw, Phillips Pan Head (#10-2 x 1/2") A NLA NLA - Handle, Release, Black - Right A NLA NLA - Handle, Release, Black - Left NLA NLA - Rivnut (#10-2) Spring, Release - Right Spring, Release - Left Tip, Plastic, Black X012 Collar, Anti-Rattle (7/8") Screw, Hex Head (1/4-20 x 1-1/2") Spacer, Coved (1/4 x 11/16 x 1/2") Nut, Hex with Nylon Cap (1/4-20) D Insert, Threaded B Kit, Slide Tube Mounting Hardware C Footrest Support Assembly, Hemi, Black - Right C Footrest Support Assembly, Hemi, Black - Left 1 1 NOTE: A - Includes items 2-4 B - Includes items C - Includes items 1-10 D - As of 8/15/0, the Threaded Insert was revised from to 5 Holes. Threaded Insert is Backward Compatible and does not require ordering in Pairs. 55

57 Legrest Support Assembly - PH904A Black Due to a change to the Legrest Calf Pad size made on 4/2/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. 56

58 Legrest Support Assembly - PH904A Black Due to a change to the Legrest Calf Pad size made on 4/2/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package Assembly X000-NLA NLA - Screw, Slotted Truss Head (/8-16 x 1-1/2") Legrest Support Assembly, Black - Right Legrest Support Assembly, Black - Left Tip, Plastic, Black X000 Hex Nut (/8"-16) Handle, Release Tip, Plastic, Black Washer, Nylon (25/64 x 7/8 x 1/2") Screw, Hex Head (5/16-24 x -1/4") Bracket, Calf Pad Mounting, Black C Tube, Elevating Adjustable Support, Color - Right C Tube, Elevating Adjustable Support, Color - Left Nut, Low Cap (5/16"-24) Bolt, Lug (5/16-24 x 1-/8") X008 Spring, Leaf X00 Bushing, Pivot (5/16 x 7/16 x 7/8") Spacer, Legrest Pad, Black X019 Plate, Legrest Pad Bar, Ratchet Spring, Release Cam, Legrest X00 Bushing, Pivot (5/16 x 7/16 x 7/8") Washer, Nylon (5/16 x 11/16 x 1/16") X002 Bracket, Release, Black X000 Nut, Acorn (5/16-24) Ring, Snap Locknut (5/16-24) A,C Legrest Support Assembly, Hemi, Color - Right A,C Legrest Support Assembly, Hemi, Color - Left B,E Pad, Legrest, Vinyl - Right/Left D Hardware, Legrest Pad 1 1 Screw, Phillips Pan Head (#10-2 x 11/16") 1 2 Screw, Phillips Pan Head (#10-2 x 1") 1 2 Instruction Sheet, Legrest Pad Mtg. 1 1 NOTE: A - Includes items B - Specify U67 Black upholstery color when ordering. C - Specify 4P Flat Black Frame Finish When Ordering. D - Includes Screws and Instruction Sheet. E - Due to a change to the Legrest Calf Pad size made on 4/2/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. 57

59 PHAL4A (Hemi) Articulating Legrest Supports Chrome Due to a change to the Legrest Calf Pad size made on 4/2/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. 58

60 PHAL4A (Hemi) Articulating Legrest Supports Chrome Due to a change to the Legrest Calf Pad size made on 4/2/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. Item Number Note Part Number Description 1 B 1 B 2 C,F 2 F Quantity Per Package Assembly Legrest Support Assembly, Articulating, Hemi, Chrome - Right Legrest Support Assembly, Articulating, Hemi, 1 1 Chrome - Left NLA NLA - Tube, Legrest Support, Hemi, Chrome - Right Tube, Legrest Support, Hemi, Chrome - Left Screw, Phillips Pan Head Tap (#10-2 x /4") Bumper NLA NLA - Handle, Release, Chrome - Right Handle, Release, Chrome - Left X057 Bushing (7/2 x /8 x 11/2") X00 Locknut (#10-2) X008 Screw, Phillips Pan Head (#10-2 x 11/16") Spring, Release - Right Spring, Release - Left X000 Rivnut (#10-2) X002 Screw, Phillips Round Head (#10-2 x 1/2") Plug Button, Black (/4") Tip, Plastic, Black Tip, Plastic, Black Handle, Release Washer, Nylon (/8 x /4 x 1/16") NLA NLA - Screw, Socket Button Head (/8-16 x /4") X000 Hex Nut (/8"-16) NLA NLA - Bar, Link, Black NLA NLA - Tube, Support and Drive Link, Chrome - Right NLA NLA - Tube, Support and Drive Link, Chrome - Left NLA NLA - Screw, Shoulder Slotted Head (1/2 x 1-1/8", 1 1 /8-16) 10261X000 Nut, Acorn (5/16-24) X002 Bracket, Release, Black Ring, Snap X00 Bushing, Pivot (5/16 x 7/16 x 7/8") X004 Bar, Ratchet - Right/Left Spring, Release Cam, Legrest Washer, Nylon (5/16 x 11/16 x 1/16") NLA NLA - Decal, Smartleg Screw, Hex Head (5/16-24 x -1/4") X008 Spring, Leaf X00 Bushing, Pivot (5/16 x 7/16 x 7/8") Spacer, Legrest Pad, Black

61 PHAL4A (Hemi) Articulating Legrest Supports Chrome Due to a change to the Legrest Calf Pad size made on 4/2/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. Item Number Note Part Number Description Quantity Per Package Assembly X019 Plate, Legrest Pad X001 Locknut (5/16-24) Bracket, Legrest, Chrome X009 Bolt, Lug (5/16-24 x 1-/8") Tube, Slide, Articulating, Chrome - Right Tube, Slide, Articulating, Chrome - Left Washer (#20) Nut, Low Cap (5/16"-24) A,E Pad, Legrest, Vinyl - Right/Left D Hardware, Legrest Pad 1 1 Screw, Phillips Pan Head (#10-2 x 11/16") 1 2 Screw, Phillips Pan Head (#10-2 x 1") 1 2 Instruction Sheet, Legrest Pad Mtg. 1 1 NOTE: A - Specify upholstery color U67 black when ordering. B - Includes items -41 C - No Longer Available individually. See part # for replacement. D - Item Includes Screws and Instruction Sheet. E - Due to a change to the Legrest Calf Pad size made on 4/2/12, you must also order the hardware kit ( ) when ordering replacement Calf Pads. F - Includes items

62 Pivot/Slide Tube and Footplate PHW9 Heel loops are not included. See footrest and legrest accessories. For complete pivot/slide tube and footplate assemblies, see front riggings reference chart. 61

63 Pivot/Slide Tube and Footplate PHW9 Heel loops are not included. See footrest and legrest accessories. For complete pivot/slide tube and footplate assemblies, see front riggings reference chart. Item Number Note Part Number Description Quantity Per Package Assembly Plug Button, Black (/4") A,C Pivot/Slide Tube w/ Plug Button, Black A,C Pivot/Slide Tube w/ Plug Button, Black (2" Longer) A,C Pivot/Slide Tube w/ Plug Button, Black (4" Longer) B NLA NLA - Tube, Pivot/Slide w/ Plug Button, Deluxe 1 1 Aluminum, Black A 44200X027 Footplate, Aluminum, Medium, Black (7-/4" W x 6" 1 1 L) B NLA NLA - Footplate, Aluminum, Deluxe, Black - Right 1 1 (8" W x 5-/4" L) B NLA NLA - Footplate, Aluminum, Deluxe, Black - Left (8" 1 1 W x 5-/4" L) C 44200X025 Footplate, Aluminum, Extra Large, Black - Right (8" 1 1 W x 8-1/2" L) C 44200X026 Footplate, Aluminum, Extra Large, Black - Left (8" W 1 1 x 8-1/2" L) 4 A Cap, End, Tube, Black (7/8") C Plug Button, Black (7/8") A,D Spring, Tension B,D NLA NLA - Spring F,C Spring, Leaf E 40120X001 Screw, Phillips Pan Head (#8-2 x /8") Plug, Push, Footplate 1 1 NOTE: A - Standard Aluminum (1650) B - Deluxe Aluminum (1450) C - Extra Large Aluminum (150) D - Two per side E - Deluxe takes one F - Use one or more leaf springs per assembly as required such that footplate may be moved by hand to the up-right position and remain in place. 62

64 Pivot/Slide Tube and Footplates PH904A and PHAL4A Heel loops are not included. See footrest and legrest accessories. For complete pivot/slide tube and footplate assemblies, see front riggings reference chart. 6

65 Pivot/Slide Tube and Footplates PH904A and PHAL4A Heel loops are not included. See footrest and legrest accessories. For complete pivot/slide tube and footplate assemblies, see front riggings reference chart. Item Number Note Part Number Description Quantity Per Package Assembly Plug Button, Black (/4") A,B,D NLA NLA - Pivot/Slide Tube w/ Plug Button, Black A,B,D NLA NLA - Pivot/Slide Tube Assembly, Extra Large, 1 1 Standard Aluminium - 2" Longer, Black 2 A,B,D NLA NLA - Pivot/Slide Tube w/ Plug Button, Black (4" 1 1 Longer) 2 A,B,E Pivot/Slide Tube w/ Plug Button Assembly, Chrome C,D NLA NLA - Pivot/Slide Tube w/ Plug Button, Deluxe, 1 1 Black 2 C,E,H NLA NLA - Pivot/Slide Tube w/ Plug Button, Deluxe, 1 1 Chrome A 44200X027 Footplate, Aluminum, Medium, Black (7-/4" W x 6" 1 1 L) C NLA NLA - Footplate, Aluminum, Deluxe, Black - Right 1 1 (8" W x 5-/4" L) C NLA NLA - Footplate, Aluminum, Deluxe, Black - Left (8" 1 1 W x 5-/4" L) B 44200X025 Footplate, Aluminum, Extra Large, Black - Right (8" 1 1 W x 8-1/2" L) B 44200X026 Footplate, Aluminum, Extra Large, Black - Left (8" W 1 1 x 8-1/2" L) 4 A Cap, End, Tube, Black (7/8") B Plug Button, Black (7/8") A Spring, Tension C,F NLA NLA - Spring B,I Spring, Leaf G 40120X001 Screw, Phillips Pan Head (#8-2 x /8") Plug, Push, Footplate 1 1 NOTE: A - Standard Aluminum (1650) B - Extra Large Aluminum (150) C - Deluxe Aluminum (1450) D - PH904A E - PHAL4A F - Two per side G - Deluxe takes one H - Part # is no longer available as a service part individually. See category titled "Front Riggings - Reference Chart" and order part # or Pivot/Slide Tube and Footplate Assembly (Deluxe Aluminum ) as a replacement. I - Use one or more leaf springs per assembly as required such that footplate may be moved by hand to the up-right position and remain in place. 64

66 Adjustable Angle Footplates w/ Pivot Tube - AT554 65

67 Adjustable Angle Footplates w/ Pivot Tube - AT554 Item Number Note Part Number Description Quantity Per Package Assembly 1 D,F Footplate, Adjustable Angle, Extra Large, Black 1 1 (6-1/4" W x 8" L) 1 E,F Footplate, Adjustable Angle, XX- Large, Black 1 1 (7-1/4" W x 8" L) Clamp, Footplate Tube, Pivot and Slide, Straight, Steel, Black (9-7/8" 1 1 L) A Tube, Pivot/Slide, Straight, Steel, Black (11-7/8" L) 1 1 B Tube, Pivot/Slide, Straight, Steel, Black (1-7/8" L) Screw, Nylon Adjustment (1/2-1 x 7/8") Hinge, Footplate - Right Hinge, Footplate - Left Screw, Socket Flat Head (1/4-20 x /4") Screw, Socket Button Head (1/4-20 x 1-7/8") Spacer, Coved (1/4 x /4 x 11/2") Washer (1/4 x 2/2 x 1/16") Washer, Nylon (5/16 x 7/8 x 1/8") Washer (1/4 x 1/2 x 1/16") Nut, Barrel, Hex Head (1/4-20 x 11/16") Locknut (1/4-20) 1 1 C Instruction Sheet 1 1 NOTE: A - ALPT 2" Longer Pivot and Slide Tube B - ALPT4 4" Longer Pivot and Slide Tube C - Not Shown D " Wide chairs E " Wide chairs F - This footplate was revised 9/2/2008 with rounder corners and accessory holes changed from 8 to 4. Recommend to replace footplate in pairs to match sides. 66

68 Footrest and Legrest Accessories Item Number Note Part Number Description NOTE: Quantity Per Package Assembly A,B Strap, Calf w/ Hook and Loop (1" L) 1 1 A,C Strap, Calf w/ Hook and Loop (6" L) 1 1 A,D Guard, Impact (8" L) 1 2 A See Chart Heel Loop Attaching Hardware (1650, 1450, & Footplates) A See Chart Heel Loops and Hardware (1650, 1450, & Footplates) A A - Not Shown See Chart Heel Loops and Hardware (AT554 Footplates) 1 1 B " Wide chairs C " Wide chairs D - For 70 deg. Tapered Footrest. Heel Loops and Hardware For AT554 Footplates Footplate Type AT554 Adj. Angle Part Number Kit, Heel Loop w/ Hardware, Adjustable Angle Footplate (Pair) Part Number Consists of (2) Heel Loops (4) Screw, Phillips Pan Head (1/4-20 x 2-1/4") (4) Spacer (1/4 x 5/16 x 1-/2") (4) Locknut (1/4-20) Heel Loops and Hardware For 1650, 1450, & 150 Footplates Footplate Type Standard Aluminum (1650) Deluxe Aluminum (1450) X-Large (150) Chair Width 18-24" Wide 18-24" Wide Heel Loop Single # Heel Loop Pair # Attaching Hardware Pair # Footplate Type Heel Loop Attaching Hardware For 1650, 1450, & 150 Footplates Part Number 67 Part Number Consists of

69 Footrest and Legrest Accessories Heel Loop Attaching Hardware For 1650, 1450, & 150 Footplates Footplate Type Standard Aluminum (1650) Deluxe Aluminum (1450) X-Large (150) Part Number Part Number Consists of 2 each Screw, PPH (1/4-20 x 2-1/2") 2 each Spacer (1/4 x 11/2 x 1-/4") 2 each Locknut (1/4-20) 2 each Screw, PPH (1/4-20 x 2-1/4") 2 each Spacer (1/4 x 11/2 x 1-/4") 2 each Locknut (1/4-20) 68

70 Front Riggings - Adjustable Heel Loops 69

71 Front Riggings - Adjustable Heel Loops Item Number Note Part Number Description Quantity Per Package Assembly 1 A Kit, Heel Loop, Adjustable w/ Hardware (Pair) Heel Loop 1 2 NLA - Spacer (1/4 x 11/2 x 1-/4") NLA - Screw, Phillips Pan Head (1/4-20 x 2-1/4") Washer, Flat (1/4 x 5/8 x 1/16") Nut, Hex, Nylon Cap (1/4-20) 1 2 Instruction Sheet, Adjustable Heel Loop B Kit, Heel Loop, Adjustable w/ Hardware, Deluxe (Pair) 2 Heel Loop 1 2 NLA - Spacer (1/4 x 11/2 x 1-/4") Nut, Hex, Nylon Cap (1/4-20) NLA - Screw, Phillips Pan Head (1/4-20 x 2-1/2") 1 2 Instruction Sheet, Adjustable Heel Loop 1 1 NOTE: A - Kit includes items 2-6. Used with all Footplates except Deluxe (1450). B - Kit includes items 2,, 6, and item 7. Used with Deluxe (1450) Footplates only. 70

72 Front Rigging Hanger Assembly 71

73 Front Rigging Hanger Assembly Item Number Note Part Number Description Quantity Per Package Assembly 1 A Front Rigging Hanger Assembly w/ Plug Button, 1 1 Hemi, Black - Right 1 A Front Rigging Hanger Assembly w/ Plug Button, 1 1 Hemi, Black - Left 1 B Front Rigging Hanger Assembly w/ Plug Button, Pin 1 1 Style, Hemi, Black - Right (12-21" D) 1 B Front Rigging Hanger Assembly w/ Plug Button, Pin 1 1 Style, Hemi, Black - Left (12-21" D) 1 D 1129-NLA NLA - Front Rigging Hanger Assembly w/ Plug 1 1 Button, Pin Style, Hemi, Black - Right (22" D) 1 D NLA NLA - Front Rigging Hanger Assembly w/ Plug 1 1 Button, Pin Style, Hemi, Black - Left (22" D) Plug Button, Black (/4") 1 1 C Kit, Front Rigging Hanger Hardware Locknut (1/4-20) Spacer (1/4 x /8 x /16") Screw, Hex Head (1/4-20 x 1-1/2") 1 4 NOTE: A - Used on chairs with Van seats. Includes Plug Button, item 2. B " deep chairs with A.S.B.A. seats. Includes Plug Button, item 2. C - Includes items 4-6. D - 22" deep chairs with A.S.B.A. seats. Includes Plug Button, item 2. 72

74 Battery Chargers, Harnesses, Straps, and Hardware 7

75 Battery Chargers, Harnesses, Straps, and Hardware Item Number Note Part Number Description Quantity Per Package Assembly Cord, AC Power, 115VAC, Prong On-Board (6' /2" L) Cover, Connector Screw, Phillips Pan Head (#4-40 x 1/2") P0870X000 Nut, Hex Keps (#4-40) NLA NLA - Screw, Phillips Pan Head (#10-16 x 5/8") X005 Tie Wrap (11-1/2" L) NLA NLA - Strap and Buckle Assembly D,E Charger, Battery, Dual Mode 5 Amp, On-Board D,E E-NLA NLA - WARR RPLMT - Charger, Battery, Dual Mode Amp, On-Board 9 A Harness, Battery, 100 Amp w/ Terminal Hardware MK5 (Red Connector) 10 B Charger, Battery, 8 Amp. 115vac (Off Board) 1 1 Single Mode Round Plug w/ AC Power Line Cord 10 B E-NLA NLA - WARR RPLMT - Charger, Battery, 8 Amp, VAC (Off Board) Single Mode Round Plug w/ AC Power Line Cord 10 C Charger, Battery, 8 Amp, 115vac, Off Board Dual Mode Round Plug, Lester 1 1 NOTE: A - Includes All battery harnesses, battery install instruction sheet, 1 ea. battery lift strap, 2 ea. washer locking tabs, 2 ea. 1/4-20 flange locknuts, 2 ea. 1/4-20 x 7/8" hex flange lock screws, 2 ea. 1/4-20 locknuts, and 6 ea. cable ties. B - Used on Gel Cell or AGM (Absorbed Glass Mat) batteries. C - Used on Wet Cell batteries. D - Although interchangeable, this charger may be different than the original. This charger was supplied by either Signet or CTE. The CTE charger has 2 LED's versus 1 LED on the Signet charger. E - The On Board Battery Charger is standard on chair. 74

76 MK6i Electronics are contained in a seperate catalog. See Catalog titled "Electronics MK6i" Form #

77 Controller, Cables, Programmer and Hardware MK5 NX-80 and MK5 EX 76

78 Controller, Cables, Programmer and Hardware MK5 NX-80 and MK5 EX Item Number Note Part Number Description Quantity Per Package Assembly Cable, Battery Extension, Red Connector NLA NLA - Cable, Joystick Extension, MK5 1 1 B NLA NLA - Cable, Power Controller Option, MK5 EX NLA NLA - Screw, Hex Head (5/16-18 x 1-/4") Locknut (5/16-18) NLA NLA - Controller, MK5 NX NLA NLA - Controller, MK5 EX Locknut (#10-2) E NLA NLA - Bracket, Controller Mounting, Black 1 1 E NLA NLA - Bracket with Hardware, Controller, M91/M NLA - Screw (#8-2 x 1/2") 1 1 NLA - Screw, Hex Head (5/16-18 x /4") 1 1 Washer, Steel (5/16 x /4 x 1/16") 1 1 Locknut (5/16-18) NLA - Bracket, Controller Mounting, Black 1 1 Tie Wrap (11-1/2" L) NLA NLA - Screw, Socket Button Head (10-2 x 2") C Switch, Red Flex Ribbon (Tape) Reset D Kit, Switch, Black Egg Reset w/ Hook/Loop 1 1 Adhesive Back Fastener & Attaching Screws (EGSBLK) NLA NLA - Programmer, Remote 1 1 A Cable, Virtual Service, Charger/Modem 1 1 NOTE: A - Not Shown B - Power Option Cable comes standard on chairs with MK5 EX controller C - Before 5/24/04 D - Not Shown. After 5/2/04 the Egg Reset Switch replaced the Red Flex Ribbon (Tape) Reset Switch E - Part # is no longer available for sale individually. Order kit part # Controller Bracket w/ Hardware. Hardware inside carton is used for other Controller applications. Order 2 ea. of items 7 and 9 also. 77

79 MK5 SPJ-80 Joystick and Mounting Hardware 78

80 MK5 SPJ-80 Joystick and Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly 1 A NLA NLA - Joystick, MK5 SPJ A,F E-NLA NLA - WARR RPLMT - Joystick, MK5 SPJ Knob, Joystick Rubber, Black Skirt, Joystick Rubber, Black NLA NLA - Knob, Speed Control NLA NLA - Switch Assembly, Power/ Speed 1 1 Potentiometer, NOTE: Power and Speed Potentiometer Switches are assembled to one connector and sold as one assembly NLA NLA - Bottom Housing w/ Cable Assembly, MK5 1 1 DPJ/ SPJ NLA NLA - Inductive, MK5 MPJ/ DPJ/ SPJ-80 Joystick NLA NLA - Boot, Switch B Kit, 1/2" Offset Joystick Tube with Hardware NLA NLA - Package, Tie Wrap (11-1/2" L) Spacer, Joystick Tube, Black Screw, Phillips Pan Head (#10-2 x 1-1/8") Plug Button, Black (7/8") Clamp, Fixed Height Joystick Tube Clamp Assembly, Fixed Height, Captain/ Van Seat Screw, Hex Head (1/4-20 x 1-5/8") Spacer (1/4 x /8 x 1") Locknut (1/4-20) 1 19 C Kit, Joystick Tube Mounting Hardware - Captain 1 1 Seat 20 E Clamp, Height Adjustable Joystick Tube (ARM250) 1 1 D Extension, Joystick, "T" Style (1560) 1 1 (4" W x 5-1/2" L) D Extension, Joystick, Straight Style (1561) (1/2" W x 5" L) 1 1 NOTE: A - Includes items 2-8 B - Includes items 10-1 C - Includes items D - Not Shown E - Introduced as an option (ARM250) and can be used to replace a Fixed Height Joystick Clamp. F - Upgrade to MK6 is available. See category titled, "MK5 SPJ-80 Upgrade to MK6" within Electronics MK6i parts book. 79

81 MK5 DPJ Joystick and Mounting Hardware 80

82 MK5 DPJ Joystick and Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly 1 A,G E-NLA NLA - WARR RPLMT - Joystick, MK5 DPJ 1 1 D,H NLA NLA - Kit, MK5 DPJ to MPJ Conversion 1 1 NLA - Joystick, MK5 MPJ 1 1 NLA - Joystick Offset Tube w/ Hardware, Black 1 1 (1/2") 2 F NLA NLA - Switch Assembly, Mode Knob, Joystick Rubber, Black Skirt, Joystick Rubber, Black NLA NLA - Knob, Speed Control NLA NLA - Switch Assembly, Power/ Drive Select/Speed 1 1 Potentiometer NOTE:Power/Drive Select and Speed Potentiometer switches are assembled to one connector and sold as one assembly NLA NLA - Bottom Housing w/ Cable Assembly, MK5 1 1 DPJ/ SPJ NLA NLA - Inductive, MK5 MPJ/ DPJ/ SPJ-80 Joystick B Kit, 1/2" Offset Joystick Tube with Hardware NLA NLA - Package, Tie Wrap (11-1/2" L) Spacer, Joystick Tube, Black Screw, Phillips Pan Head (#10-2 x 1-1/8") Plug Button, Black (7/8") Clamp, Fixed Height Joystick Tube Clamp Assembly, Fixed Height, Captain/ Van Seat Screw, Hex Head (1/4-20 x 1-5/8") Spacer (1/4 x /8 x 1") Locknut (1/4-20) 1 19 C Kit, Joystick Tube Mounting Hardware - Captain 1 1 Seat 20 E Clamp, Height Adjustable Joystick Tube (ARM250) 1 1 D Extension, Joystick, "T" Style (1560) 1 1 (4" W x 5-1/2" L) D Extension, Joystick, Straight Style (1561) (1/2" W x 5" L) 1 1 NOTE: A - Includes items 2-8. Hardware not included. B - Includes items C - Includes items D - Not Shown. E - Introduced as an option (ARM250) and can be used to replace a Fixed Height Joystick Clamp. F - Mode switch is no longer available for aftermarket sales. Please contact Invacare Customer Service to obtain a return authorization number for repair/estimate for repair. G - No longer available. Replaced with H - Kit is No Longer Available. You must now order the MK5 MPJ Joystick separately from the Mounting Hardware. Choose either the Joystick Tube w/ Hardware or the Quad Link w/ Hardware. See Category titled, "Electronics - MK5 MPJ Joystick & Mounting Hardware". 81

83 MK5 MPJ Joystick and Mounting Hardware 82

84 MK5 MPJ Joystick and Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly 1 A NLA NLA - Joystick, MK5 MPJ A E-NLA NLA - WARR RPLMT - Joystick, MK5 MPJ A NLA NLA - Joystick, MK5 MPJ with Drive Select Port NLA NLA - Joystick Bottom and Cable Assembly, MK5 1 1 MPJ NLA NLA - Inductive, MK5 MPJ/ DPJ/ SPJ-80 Joystick Skirt, Joystick Rubber, Black Knob, Joystick Rubber, Black NLA NLA - Switch Assembly, Power/ Drive Select MK5 1 1 MPJ NLA NLA - Knob, Power/Drive Select - MK5/MK6i MPJ NLA NLA - Potentiometer Assembly, Speed MK5 MPJ NLA NLA - Knob, Speed Potentiometer - MK5 MPJ NLA NLA - Knob, Speed Adjustment, Black - MK6i Decal, Invacare Logo (1.6) NLA NLA - Lockwasher, Internal Tooth (#6) NLA NLA - Screw, Torx Thread Forming (#6-2 x 1/2") NLA NLA - Bracket, T-Nut Mounting Screw, Torx Thread Forming (#6-2 x 1") B NLA NLA - Joystick Offset Tube w/ Hardware, Black 1 1 (1/2") NLA NLA - Package, Tie Wrap (11-1/2" L) X019 Spacer, Coved (1/4 x 7/8 x 7/16") NLA NLA - T-Nut (#10-2) Spacer, Joystick Tube, Black Screw, Phillips Pan Head (#10-2 x 1-/8") Plug Button, Black (7/8") Clamp, Fixed Height Joystick Tube Clamp Assembly, Fixed Height, Captain/ Van Seat Screw, Hex Head (1/4-20 x 1-5/8") Spacer (1/4 x /8 x 1") Locknut (1/4-20) 1 27 C Kit, Joystick Tube Mounting Hardware - Captain 1 1 Seat 28 B NLA NLA Joystick Offset Tube w/ Hardware, Black (2") E Clamp, Height Adjustable Joystick Tube (ARM250) 1 1 D Extension, Joystick, "T" Style (1560) 1 1 (4" W x 5-1/2" L) D Extension, Joystick, Straight Style (1561) (1/2" W x 5" L) 1 1 NOTE: A - Includes items 2-14 B - Includes Joystick Tube plus items C - Includes items 2-26 D - Not Shown E - Introduced as an option (ARM250) and can be used to replace a Fixed Height Joystick Clamp. 8

85 MK5 SPJ+ Joystick and Mounting Hardware 84

86 MK5 SPJ+ Joystick and Mounting Hardware Item Number Note Part Number Description Quantity Per Package Assembly 1 A,D,E Joystick, SPJ Knob, Joystick Rubber, Black Skirt, Joystick Rubber, Black B Kit, 2" Offset Joystick Tube with Hardware Plug Button, Black (7/8") Tube, Joystick Offset (2") Tie Wrap (11-1/2" L) Screw, Phillips Pan Head (#10-2 x 1-1/8") Spacer, Joystick Tube, Black Package, Plug Button, Black (7/8") NLA NLA - Package, Tie Wrap (11-1/2" L) C Kit, Joystick Tube Mounting Hardware - Captain 1 1 Seat Screw, Hex Head (1/4-20 x 1-5/8") Clamp Assembly, Fixed Height, Captain/ Van Seat Spacer (1/4 x /8 x 1") Locknut (1/4-20) 1 15 E Cable, Joystick Extension E Cable, Joystick SPJ Kit, Overylay, SPJ+ Joystick (MK5/MK6) 1 1 NLA - Overlay, SPJ+ Joystick 1 1 Instruction Sheet, MK5/MK6 Overlay 1 1 NOTE: A - Includes joystick and items 2, and 17. B - Includes item 5-9. C - Includes items D - Battery Charger is plugged into the front port on the joystick to charge batteries. E - Used before 4/1/08. 85

87 Quad Link Assembly Before 4/07/06 86

88 Item Number Note Part Number Description 1 A A B C,F Quad Link Assembly Before 4/07/06 Quantity Per Package Assembly NLA NLA - Kit, Quad Link Assembly - Right 1 1 NLA - Ball Plunger Assembly with Lock Washer 2 1 Locknut (#10-2) 1 2 NLA - Screw, Cap, Socket Head (#10-2 x 1/2") 1 4 NLA - Bushing, Bronze (/16 x 1/4 x 1/4") 1 4 Screw, Phillips Pan Head (#10-2 x 1-1/8") 1 4 Spacer, Joystick Tube, Black 1 1 NLA - Stud Plate, Quad Link 1 1 Screw, Hex Head (1/4-20 x 1-1/2") 1 Spacer (1/4 x /8 x /16") 1 Half Clamp, Non-Threaded Holes 1 1 NLA - Half Clamp, Threaded Holes NLA NLA - Kit, Quad Link Assembly - Left 1 1 NLA - Ball Plunger Assembly with Lock Washer 2 1 Locknut (#10-2) 1 2 NLA - Screw, Cap, Socket Head (#10-2 x 1/2") 1 4 NLA - Bushing, Bronze (/16 x 1/4 x 1/4") 1 4 Screw, Phillips Pan Head (#10-2 x 1-1/8") 1 4 Spacer, Joystick Tube, Black 1 1 NLA - Stud Plate, Quad Link 1 1 Screw, Hex Head (1/4-20 x 1-1/2") 1 Spacer (1/4 x /8 x /16") 1 Half Clamp, Non-Threaded Holes 1 1 NLA - Half Clamp, Threaded Holes NLA NLA - Kit, Quad Link Assembly - Right 1 1 For TCHJOY/TCPDM4 Touchpad NLA - Ball Plunger Assembly with Lock Washer 2 1 Locknut (#10-2) 1 2 NLA - Screw, Cap, Socket Head (#10-2 x 1/2") 1 4 NLA - Bushing, Bronze (/16 x 1/4 x 1/4") 1 4 Screw, Phillips Pan Head (#10-2 x 1-1/8") 1 2 NLA - Plate, Stud, Quad Link 1 1 MKIV TCHJOY/TCPDM4 Screw, Hex Head (1/4-20 x 1-1/2") 1 Spacer (1/4 x /8 x /16") 1 Half Clamp, Non-Threaded Holes 1 1 NLA - Half Clamp, Threaded Holes 1 1 NLA - Screw, Phillips Flat Head Countersunk (# x /8") NLA Kit, Quad Link Assembly - Right 1 1 NLA - Ball Plunger Assembly with Lock Washer 2 1 Locknut (#10-2) 1 2 NLA - Screw, Cap, Socket Head (#10-2 x 1/2") 1 4 NLA - Bushing, Bronze (/16 x 1/4 x 1/4")

89 Item Number Note Part Number Description C D D E 2 Quad Link Assembly Before 4/07/06 Quantity Per Package Assembly Plate, Stud, Quad Link For 1556 Heavy Duty Joystick 1 1 Screw, Hex Head (1/4-20 x 1-1/2") 1 Spacer (1/4 x /8 x /16") 1 Half Clamp, Non-Threaded Holes 1 1 NLA - Half Clamp, Threaded Holes 1 1 Screw, Phillips Flat Head (#10-2 x 1-1/8") NLA NLA - Kit, Quad Link Assembly - Left 1 1 NLA - Ball Plunger Assembly with Lock Washer 2 1 Locknut (#10-2) 1 2 NLA - Screw, Cap, Socket Head (#10-2 x 1/2") 1 4 NLA - Bushing, Bronze (/16 x 1/4 x 1/4") 1 4 Plate, Stud, Quad Link For 1556 Heavy Duty 1 1 Joystick Screw, Hex Head (1/4-20 x 1-1/2") 1 Spacer (1/4 x /8 x /16") 1 Half Clamp, Non-Threaded Holes 1 1 NLA - Half Clamp, Threaded Holes 1 1 Screw, Phillips Flat Head (#10-2 x 1-1/8") NLA NLA - Kit, Quad Link Assembly - Right 1 1 NLA - Ball Plunger Assembly with Lock Washer 2 1 Locknut (#10-2) 1 2 NLA - Screw, Cap, Socket Head (#10-2 x 1/2") 1 4 NLA - Bushing, Bronze (/16 x 1/4 x 1/4") 1 4 Screw, Phillips Pan Head (#10-2 x 1-1/8") 1 2 Screw, Hex Head (1/4-20 x 1-1/2") 1 Spacer (1/4 x /8 x /16") 1 Half Clamp, Non-Threaded Holes 1 1 NLA - Half Clamp, Threaded Holes 1 1 NLA - T-Nut (#10-2) NLA NLA - Kit, Quad Link Assembly - Left 1 1 NLA - Ball Plunger Assembly with Lock Washer 2 1 Locknut (#10-2) 1 2 NLA - Screw, Cap, Socket Head (#10-2 x 1/2") 1 4 NLA - Bushing, Bronze (/16 x 1/4 x 1/4") 1 4 Screw, Phillips Pan Head (#10-2 x 1-1/8") 1 2 Screw, Hex Head (1/4-20 x 1-1/2") 1 Spacer (1/4 x /8 x /16") 1 Half Clamp, Non-Threaded Holes 1 1 NLA - Half Clamp, Threaded Holes 1 1 NLA - T-Nut (#10-2) NLA NLA - Kit, Quad Link Assembly - Right 1 1 For Van Seats NLA - Ball Plunger Assembly with Lock Washer

90 Item Number Note Part Number Description Quad Link Assembly Before 4/07/06 Quantity Per Package Assembly Locknut (#10-2) NLA - Screw, Cap, Socket Head (#10-2 x 1/2") NLA - Bushing, Bronze (/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-2 x 1-1/8") Spacer, Joystick Tube, Black NLA - Stud Plate, Quad Link Locknut (1/4-20) 1 16 NLA - Screw, Hex Head (1/4-20 x 1-/4") 1 17 Spacer (1/4 x /8 x 1") 1 1 E NLA NLA - Kit, Quad Link Assembly - Left 1 1 For Van Seats 2 NLA - Ball Plunger Assembly with Lock Washer 2 1 Locknut (#10-2) NLA - Screw, Cap, Socket Head (#10-2 x 1/2") NLA - Bushing, Bronze (/16 x 1/4 x 1/4") Screw, Phillips Pan Head (#10-2 x 1-1/8") Spacer, Joystick Tube, Black NLA - Stud Plate, Quad Link Locknut (1/4-20) 1 16 NLA - Screw, Hex Head (1/4-20 x 1-/4") 1 17 Spacer (1/4 x /8 x 1") 1 NOTE: A - Includes the Quad Link, items 2-12 and used with MK5 SPJ-80 and DPJ joysticks for A.S.B.A. seats. B - Includes the Quad Link, items 2-6, 8-12, 1 and used with a TCPD joystick for A.S.B.A. seats. For left side mounted Quad Link, order as a special C - Includes the Quad Link, items 2-6, 8-12, 18 and used with a 1556 Heavy Duty joystick for A.S.B.A. seats D - Includes the Quad Link, items 2-6, 9-12, 14 and used with a MK5 MPJ joystick for A.S.B.A. seats E - Includes the Quad Link, items 2-8, and used with MK5 SPJ-80, DPJ joysticks for Van seats F - Quad Link Assembly is no longer available. Please see Quad Link Assembly (After 4/06/06) category and use new Quad LInk design as a replacement. 89

91 Quad Link Assembly (QL) After 4/06/06 When converting an old style Quad Link that attaches to a mounting plate or (a Flex or Touch Pad Joystick Tube) is currently on the chair then order the following for: a) ASBA Seat; Quad Link Mtg. Hdwr. (item 4), Quad Link (item 1) & Ht. Adj. Joystick Tube Clamp (item 11) b) Van Seat; Quad Link Mtg. Hdwr. (item 12), Quad Link (item 1) & Joystick Tube Clamp (item 22) NOTE: Substitute (item 4 & 12) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 1556 Heavy Duty, TCPD Touch Pad, or MPJ Joystick is used. 90

92 Quad Link Assembly (QL) After 4/06/06 When converting an old style Quad Link that attaches to a mounting plate or (a Flex or Touch Pad Joystick Tube) is currently on the chair then order the following for: a) ASBA Seat; Quad Link Mtg. Hdwr. (item 4), Quad Link (item 1) & Ht. Adj. Joystick Tube Clamp (item 11) b) Van Seat; Quad Link Mtg. Hdwr. (item 12), Quad Link (item 1) & Joystick Tube Clamp (item 22) NOTE: Substitute (item 4 & 12) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 1556 Heavy Duty, TCPD Touch Pad, or MPJ Joystick is used. Item Number Note Part Number Description A B 4 C,C C1,G,I,I D E H 0 F Quantity Per Package Assembly Quad Link (QL) with Instruction Sheet - Right Quad Link (QL) with Instruction Sheet - Left Kit, Quad Link Latch Hardware NLA NLA - Kit, Quad Link Screw Fastener Hardware Kit, ASBA/ADJASBA Quad Link Mounting Hardware 1 1 Screw, Phillips Pan Head w/ Patch (#10-2 x /4") 1 2 Screw, Phillips Pan Head (#10-2 x 1-1/8") 1 2 Tie Wrap (11-1/2" L) 1 1 Spacer, Joystick Tube, Black 1 1 Tube, Joystick Offset (2") 1 1 Plug Button, Black (7/8") Screw, Phillips Pan Head w/ Patch (#10-2 x /4") Clamp, Fixed Height Joystick Tube Kit, Quad Link Mounting Hardware - Van Seat 1 1 Plug Button, Black (7/8") 1 1 Locknut (1/4-20) 1 Tube, Joystick Offset (2") 1 1 Tie Wrap (11-1/2" L) 1 1 Spacer (1/4 x /8 x 1") 1 Screw, Hex Head (1/4-20 x 1-5/8") 1 Screw, Phillips Pan Head (#10-2 x 1-1/8") 1 2 Spacer, Joystick Tube, Black 1 1 Screw, Phillips Pan Head w/ Patch (#10-2 x /4") Clamp Assembly, Fixed Height, Captain/ Van Seat NLA Kit, 1556 Heavy Duty Joystick To Quad Link 1 1 Mounting Hardware Screw, Phillips Pan Head (#10-2 x 1/2") 1 2 NLA - Plate, 1556 HD Joystick Quad Link NLA NLA - Kit, TCPD Touch Pad To Quad Link Mounting 1 1 Hardware Plate, TCPD Touch Pad Quad Link 1 1 Screw, Phillips Pan Head (#4-40 x /8") NLA NLA - Kit, MPJ Joystick To Quad Link Mounting 1 1 Hardware NLA - T-Nut (#10-2) Instruction Sheet, Quad Link

93 Quad Link Assembly (QL) After 4/06/06 When converting an old style Quad Link that attaches to a mounting plate or (a Flex or Touch Pad Joystick Tube) is currently on the chair then order the following for: a) ASBA Seat; Quad Link Mtg. Hdwr. (item 4), Quad Link (item 1) & Ht. Adj. Joystick Tube Clamp (item 11) b) Van Seat; Quad Link Mtg. Hdwr. (item 12), Quad Link (item 1) & Joystick Tube Clamp (item 22) NOTE: Substitute (item 4 & 12) with 2 ea. of the PPH Screws (item 5) when an offset joystick tube is currently on the chair. Additional Joystick Mtg. Hdwr. must be ordered when a 1556 Heavy Duty, TCPD NOTE: Touch Pad, or MPJ Joystick is used. A - Latch Kit includes 4 ea. Button Head Cap Screws (10-2 x /8"), 2 ea. Latch Spring Assembly, 4 ea. Phillips Flat C'Sunk Head Screws, 2 ea. Spring Catch Plates, 2 ea. Socket Head Set Screws (10-2 x /8") B - Screw Fastener Kit includes 4 ea. Socket Head Shoulder Screws (/8 x /8"), 2 ea. Socket Head Cap Screws (1/4-20 x /8"), 2 ea. Socket Head Set Screws (1/4-20 x 1/2"), 4 ea. Socket Head Set Screws (10-2 x 1/8") C - Includes items The Quad Link Mounting Hardware accommodates MK5, MKIV RII, and PSF/PSR joysticks. C1 - When ordering the Quad Link for the first time, Additional hardware is required for 1556 Heavy Duty and TCPD Touch Pad joysticks. See pictorial for reference. D - Includes items 24 and 25 E - Includes items 27 and 28 F - Not Shown G - Includes items The Quad Link Mounting Hardware accommodates MK5, MKIV RII, and PSF/PSR joysticks. H - Includes item 0 I - If Quad Link is to be mounted on chairs w/ van seats built Before 4/07/06, then a new Upper Arm Asbly. (adj. height) or complete Fixed Height Arm Asbly. must be ordered as well. See van seat arms category. I1 - The new Arm Pads have additional holes drilled in the armrest plate so that the quad link can be properly mounted. 92

94 R.I.M. Head Control Assembly (1500) 9

95 Item Number Note Part Number Description A B C 8 D E R.I.M. Head Control Assembly (1500) Quantity Per Package Assembly Tie Rod End X000-NLA NLA - Locknut (#10-2) NLA NLA - Screw, Set w/ Patch (#8-2 x 1/4") O-Ring (1/2" I.D.) Screw, Phillips Pan Head (#8-2 x /8") NLA NLA - Washer, Nylon Block, Pivot NLA NLA - Ring, Snap Bearing, Linear NLA NLA - Shield, Push Rod Screw, Phillips Pan Head (#4-40 x 1/2") NLA NLA - Bracket, Headrest Mounting, Black X002-NLA NLA - Screw, Phillips Oval Head (#10-2 x /4") NLA NLA - Spring, Compression (19/2 x 1-1/4 x 1/2") NLA NLA - Rod, Push NLA NLA - Screw, Phillips Pan Head (#6-2 x 1/4") Washer, Nylon (1/4 x 1/2 x 1/16") NLA NLA - Collar, Shoulder X64-NLA NLA - Boot, Joystick NLA NLA - Rod, Pivot X014-NLA NLA - Screw, Phillips Round Head (#10-2 x 1") NLA NLA - Tie Wrap (4-1/4" L) NLA NLA - Cover, Splash NLA NLA - Washer, Plain (1/2 x 1 x 1/8") NLA NLA - Ribbon Reset Switch and Bracket Assembly E-NLA NLA - Reconditioned - Joystick, Remote Head NLA NLA - Clamp, Horizontal Pivot NLA NLA - Clamp, Threaded, Horizontal Pivot NLA NLA - Screw, Socket Head (M6 x 1 x 25mm) Tube, Slide, Square, Short NLA NLA - Clamp, Vertical Pivot NLA NLA - Clamp, Threaded, Vertical Pivot NLA NLA - Tube, Slide, Square, Long Hardware, Adjustment Screw, Socket Button Head (#10-2 x 1") NLA NLA - Washer, Lock Tooth (/16 x /8 x 1/2") Kit, Headrest with Hardware, Otto Bock, Small Kit, Headrest with Hardware, Large NLA NLA - Screw, Socket Head (#10-2 x 1/2")

96 NOTE: R.I.M. Head Control Assembly (1500) A - Includes items B - Includes items 27- and the Plug Buttons that attach to item 0 and Slide Tubes. The Plug Buttons are not saleable. C - Includes the Headrest Adapter and items 5 and 6. D - Includes the Headrest Adapter and items 5 and 6. The LaBac Headrest is no longer used as of 12/6/10 that was attached with Screw part # (4 ea.). The screw is still available to order for existing LaBac Headrest in the field. E - Used for existing LaBac Headrest in the field only. 95

97 R.I.M. Head Control Mounting Hardware (1500) 96

98 R.I.M. Head Control Mounting Hardware (1500) Item Number Note Part Number Description Quantity Per Package Assembly 1 B Cover, Nylon C NLA NLA - Cover, Nylon NLA NLA - Clamp with Knob, Two-Piece Screw, Socket Button Head (#10-2 x /4") NLA NLA - Package, Screw, Hex Head (1/4-20 x /4") B NLA NLA - Bracket, Attaching, Black (12-18" W) C NLA NLA - Bracket, Attaching, Black (19-24" W) Screws with Washers (#10-16 x 7/8") Screw w/ Washer (#10 x 7/8") NLA NLA - Bracket, Wing, Black Washer (1/4 x 1/2 x 1/16") Locknut (1/4-20) NLA NLA - Washer, Nylon (/16 x 7/16 x 1/8") NLA NLA - Locknut, High Profile (#10-2) B,A Hardware, Rim Control Mounting (RIMHW) (12-18" 1 1 W) 12 C,A Hardware, Rim Control Mounting (RIMHW) (19-24" W) 1 1 NOTE: A - Includes items 1-11 B - For 12-18" wide chairs C - For 19-24" wide chairs 97

99 MK5 Display Item Number Note Part Number Description Quantity Per Package Assembly NLA NLA - Display, MK5 with Switches Clamp, Fixed Height Joystick Tube 1 1 A Clamp, Height Adjustable Joystick Tube (ARM250) NLA NLA - Tube, Flex with Screws Screw, Phillips Pan Head (#4-40 x /8") 1 4 NOTE: A - Introduced as an option (ARM250) and can be used to replace a Fixed Height Joystick Clamp 98

100 Auxiliary Modules AUX12 / AUX4 and Attaching Hardware Item Number Note Part Number Description Quantity Per Package Assembly 6 A NLA NLA - Kit, COM12/AUX12 and COM4/AUX4 1 1 Mounting Hardware 1 NLA - Half Clamp, Threaded Holes Half Clamp, Non-Threaded Holes 1 1 NLA - Screw, Hex Head (1/4-20 x 1-1/8") NLA - Fastener, Dual Lock Hook and Loop 1 1 Adhesive (2" W x 12" L) 5 NLA - Plate, COM12/AUX12 and COM4/AUX4 1 1 Mounting 7 B See Note-NLA See Footnote NLA NLA - Module, Communication, COM4/AUX4 1 1 NOTE: A - Includes items 1-5. Item 4 that is packaged with the kit will only be a 4" long "loop" fastener. B - Part is no longer serviceable in the field. 99

101 Sip-N-Puff / Digital Interface 1554M5 and Attaching Hardware Sip-N-Puff/Digital Interface (1554M5) is required when using Proportional Attendant Control (PACM5) Item Number Note Part Number Description Quantity Per Package Assembly 6 A,B Kit, SNP/DI, MK5 SAC, 4WSB, S4WSB, GTAM, 1 1 AUX12M6, AUX4M6 Mtg. Hdwr. 1 NLA - Half Clamp, Threaded Holes Half Clamp, Non-Threaded Holes 1 1 NLA - Screw, Hex Head (1/4-20 x 1-1/8") Screw, Phillips Pan Head (#4-40 x /8") Plate, Mounting NLA NLA - Sip-N-Puff w/ Digital Interface - MK5 1 1 NOTE: A - Includes items 1-5 B - As of 5/22/07 the Mounting Plate holes and the orientation of the Hardware was revised to attach the electronics closer to the chair. The Mounting Hardware Kit is backward compatible. 100

102 Proportional Attendant Control Joystick PACM5 Sip-N-Puff/Digital Interface (1554M5) is required when using Proportional Attendant Control Joystick (PACM5) 101

103 Proportional Attendant Control Joystick PACM5 Sip-N-Puff/Digital Interface (1554M5) is required when using Proportional Attendant Control Joystick (PACM5) Item Number Note Part Number Description Quantity Per Package Assembly Knob, Joystick Rubber, Black Skirt, Joystick Rubber, Black Knob, Control A NLA NLA - Joystick, Proportional Attendant Control MK5 (PACM5) Screw, Socket Button Head (#10-2 x 5/16") Clamp NLA NLA - Screw, Socket Head, Cap (5/16-18 x 1-1/2") Bracket Assembly B NLA NLA - Proportional Attendant Control Joystick w/ Bracket and Clamp -MK5 (PACM5) 1 1 NOTE: A - Includes Joystick plus items 1- B - Includes items

104 Joystick Options 10

105 Item Number Note Part Number Description Joystick Options Quantity Per Package Assembly NLA NLA - Joystick, MKIV Dual/Compact A Hardware, Dual/Compact Joystick Clamp Mounting Clamp Screw, Socket Button Head (#10-2 x 5/16") NLA NLA - Clamp, Mounting NLA NLA - Screw, Socket Head (#10-24 x 1/2") NLA NLA - Spacer, Split (/8" I.D.) B Kit, Chin Cup Assembly Cup, Chin L NLA NLA - Screw, Adaptor X000 Screw, Set Socket Cup Point (#8-2 x 1/4") C Hardware, Rear Cane Mount (167/RCM) NLA NLA - Tube, Joystick Package, Screw with Washer (#10 x 7/8") (Pair) Adjustment Lock Assemnbly, Black NLA NLA - Bracket, Upright, Black -Right Plug Button, Black (7/8") D Tube, Arm Mount with Plug Button, Black Joystick, Attendant Control (1552M) NLA NLA - Joystick, Heavy Duty E NLA NLA - Kit, Straight Joystick Tube with Hardware NLA NLA - Screw, Phillips Round Head (#10-2 x /8") NLA NLA - Touchpad, Joystick Assembly F NLA NLA - Kit, Straight Joystick Tube with Hardware Screw, Phillips Pan Head (#4-40 x /8") G Clamp, Fixed Height Joystick Tube K Clamp, Height Adjustable Joystick Tube (ARM250) I Switch, Red Flex Ribbon (Tape) Reset J Kit, Switch, Black Egg Reset w/ Hook/Loop 1 1 Adhesive Back Fastener & Attaching Screws (EGSBLK) 29 H NLA NLA - Cable, MK5 EX Controller Option 1 1 NOTE: A - Includes items -7 B - Includes items 9-11 C - Includes items 1-17 D - Includes item 17 E - Includes items 17 and 22 F - Includes items 17 and 25 G - Clamp assembly is used for all joystick tubes listed H - The 5 pin connector attaches to MKIV joystick options, MK5 S.A.C., MK5 T.A.C. or MK5 T.R.C.M. controllers. I - Before 5/24/04 J - Not Shown. After 5/2/04 the Egg Reset Switch replaced the Red Flex Ribbon (Tape) Reset Switch K - Introduced as an option (ARM250) and can be used to replace a Fixed Height Joystick Clamp L - Part # is no longer available as a service part individually. Order item #8 as a replacement. 104

106 Tash and Therafin Accessories NOTE: Used with (MK5 display or MPJ joystick) with SNPM4 Sip-N-Puff/Digital interface Item Number Note Part Number Description 1 2 NOTE: Quantity Per Package Assembly P5018-NLA NLA - Wafer Board (5018) 1 1 P5020 Mini Joystick with Push (5020) 1 1 A Bib Assembly (PKG2669) 1 1 A,B Kit, Sip-N-Puff, 16" Fixed (PKG2666) 1 1 Includes: () Air Tube Straws, (2) Saliva Traps, Tubing, Pivot Shaft/Flexible Metal Gooseneck Assembly, and Extruded Figure "8" Clamp to fit 7/8" Wheelchair Frame Tubing. Extruded Back Cane Adapter Clamp. A - Not Shown B - See items included For more information on Tash and Therafin products, please contact one of our Rehab Specialists. 105

107 Oxygen Holder Assembly A.S.B.A. Seats 106

108 Item Number Note Part Number Description Oxygen Holder Assembly A.S.B.A. Seats Quantity Per Package Assembly 1 A NLA NLA - Oxygen Holder Assembly Kit B 1098-NLA NLA - Instruction Sheet, Oxygen Holder NLA NLA - Bag, Poly Zip-Lip (8-/4" L x 6" W) See Item 1 Oxygen Holder NLA NLA - Bag, Poly (26" L x 15" W) NLA NLA - Carton, Shipper NLA NLA - Screw, Hex Head (1/4-20 x 2-1/4") NLA NLA - Screw, Hex Head (1/4-20 x 2") Washer (1/4 x 5/8 x /2") Locknut (1/4-20) Washer (1/4 x 2/2 x 1/16") Knob, Clamping, Black Decal, Oxygen Warning - English Pad, Non Skid 1 1 NOTE: A - Includes items 2-6 and 7-11 B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 107

109 Oxygen Holder Assembly Van Seat 108

110 Item Number Note Part Number Description Oxygen Holder Assembly Van Seat Quantity Per Package Assembly 1 A Oxygen Holder Assembly(D or E Tanks) NLA NLA - Pad, Non-Skid Decal, Oxygen Warning - English Spring, Oxygen Holder NLA NLA - Screw, Socket Button Head (#10-2 x 1/2") Locknut (#10-2) B NLA NLA - Instruction Sheet, Oxygen Holder NLA NLA - Bag, Poly (26" L x 15" W) Carton A HFO2-ML6 Oxygen Holder Assembly (Home Filled Tank) 1 1 NOTE: A - Includes Oxygen Holder plus items 2-9. For seats with an EXTERNAL (visible) hinge assembly. B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. 109

111 Power Wheelchair Tool Kit 110

112 Item Number Note Part Number Description NLA Power Wheelchair Tool Kit NLA - Kit, Power Wheelchair Tool Includes: 1 ea. Multimeter with Leads 1 ea. Locator, Protractor/Angle Magnetic Base 1 ea. Instructions, MKIV Programmer 1 ea. Wire, Grounding with Hand Strap and Clip 1 ea. Leads, 1" Test 1 ea. Light, Pen with Invacare Logo 1 ea. Tape Measure, Compact with Invacare Logo 1 ea. Screwdriver, Pen-Size Phillips/Flat Head 1 ea. Cable, Virtual Service Charger/Modem Quantity Per Package Assembly

113 Seat/Chest Positioning Straps 112

114 Item Number Note Part Number Description Seat/Chest Positioning Straps Quantity Per Package Assembly See Chart #1 Airline Style Positioning Strap 1 1 See Chart #1 Auto Style Push Button Positioning Strap 1 1 See Chart #1 Hook and Loop Style Positioning Strap Screw, Hex Head (1/4-20 x 1-5/8") Locknut (1/4-20) 1 2 All chest positioning straps can only be used on chairs with A.S.B.A. seats. #1 Auto Style Push Button Positioning Strap Chair Width 16" - 19" Wide 20" - 22" Wide 2" - 24" Wide Part Number Seat/Chest Positioning Strap w/ Auto Style Buckle Length (Eyelet to Eyelet) 48" L 61" L 94" L #1 Airline Style Positioning Strap Chair Width 16" - 19" Wide 20" - 22" Wide 2" - 24" Wide Part Number Seat/Chest Positioning Strap w/ Airline Style Buckle Length (Eyelet to Eyelet) 46" L 61" L 94" L #1 Hook and Loop Style Positioning Strap NOTE: Chair Width 18" - 22" Wide Part Number See Note(s) A Seat/Chest Positioning Strap w/ Hook and Loop Style Buckle Length (Eyelet to Eyelet) 61" L A - Hook and Loop Style Positioning Straps for power chairs used for chest positioning only. 11

115 Warranty Replacement Parts NOTE: Part Number Description Quantity per Assembly WARR RPLMT - Charger, Battery, E-NLA Amp, 115VAC (Off Board) Single Mode Round Plug w/ AC 1 See Note(s) A Power Line Cord, CTE Corp E-NLA WARR RPLMT - Charger, Battery, See Note(s) A Dual Mode, 5 Amp (On Board) E WARR RPLMT - Motor/Gearbox See Note(s) B Assembly w/ Break Cap - Right E WARR RPLMT - Motor/Gearbox See Note(s) B Assembly w/ Break Cap - Left 1 A - See Category "Battery Chargers - Harnesses - Straps & Hardware" for additional information. B - See Category "Motors & Gearboxes" for additional information. 114

116 Invacare Corporation One Invacare Way Elyria, Oh USA Technical Support Customer Service Customer Service Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by and. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. (Revised 4/10/19)