FOSCHF Horizontal Fiber Optic Splice Closure

Size: px
Start display at page:

Download "FOSCHF Horizontal Fiber Optic Splice Closure"

Transcription

1 Pictures FOSCHF Horizontal Fiber Optic Splice Closure Characteristics Holds up to 48 fibers and easy to re-enter Cable entry/exit ports Pressure testing valve and earth deriving device Integrated seal, air tight and water proof Ideal for cable repair and RoHS compliant Applications Duct Aerial

2 Direct buried Parameters Outside dimension (LxWxH) Weight (excluding outside box) Number of inlet/outlet ports Diameter of fiber cable Capacity of FOSC 430x200x80 (mm) 1650g-1800g 2 (pieces) on each side (total 4 pieces) Φ8 Φ23(mm) Bunchy: 48 (Cores) Main components Name of tools Fiber cutter Fiber stripper Band tape Usage Cutting off fibers Strip off protective coat of fiber cable Measuring fiber cable Scissor Metal wrench Screwdriver Tightening nut of reinforced core Crossing/Paralleling screwdriver Accessories No. Accessories Quantity Usage Remarks Heat shrinkable 1 Protecting fiber splices protective sleeve capacity 2 Nylon tie Fixing fiber with protective coat capacity Enlarging diameter of fiber cable for 3 Insulation tape 1 roll easy fixing

3 Cover for seal fitting Port plug A Port plug C Earthing device Double fiber cable pressboard 4 Seal tape 1 roll Enlarging diameter of fiber cable which fits in with seal fitting 5 Hanging hook 1 set For aerial use 6 Earthing wire 1 piece Putting through between earthing devices 7 Abrasive cloth 1 piece Scratching fiber cable 8 Labeling paper 1 piece Labeling fiber 9 Special wrench 3 pieces s, tightening nut of reinforced core 10 Measuring paper 1 piece To measure circle, of which its diameter is enlarged with seal tape 11 Buffer tube to be decided by Hitched to fibers and fixed with FOST, customers managing buffer 12 Desiccant 1 bag Put into FOSC before sealing for desiccating air. specification requirement reinforced core Foundation Seal fitting FOSC bottom Shaft Insert plate Single fiber cable pressboard Fixing device for FOST cover Drawing 1 Bolt for insert plate FOSC cover Locating bolt

4 2.2030mm length of protective coat of fiber cable to be stripped off 1. Fixing length of fiber cable inside FOSC Fiber cable 70mm 3.430mm length of fiber with protective coat mm length of protective coat of fiber to be stripped Drawing 2 Temp locating mark Stripping terminal fiber cable Fiber cable Cutter Drawing 3 Adhesive tape Insulation tape Seal tape 5~10mm 10 40mm Reinforced core Fiber Bunchy/ribbon fiber (with protective coat) Drawing 4 for fiber cable Fiber cable Pressboard Nut for reinforced core Seal fitting Housing Fixing device for fiber cable Drawing 5 Fiber Fixing device for reinforced core

5 Terminal B fiber with protective coat Fiber with protective coat Fixing device for reinforced core Reinforced core Fiber Double fiber cable pressboard Nylon tie Fixing slot of heat shrinkable protective sleeve (bunchy) Grommet Heat shrinkable protective sleeve Fixing slot of heat shrinkable protective sleeve (Ribbon) Left terminal fiber with protective coat Fiber FOST Right terminal fiber with protective coat Drawing 6 FOST cover FOST Single fiber cable pressboard Seal fitting Terminal A fiber cable Seal tape Insulation tape FOST Grommet Nylon tie Grommet Earthing device Nylon tie Terminal A fiber with protective coat Fixing slot of heat shrinkable protective sleeve Heat shrinkable protective sleeve Drawing 7 Seal tape Terminal B fiber cable Seal fitting Port plug C

6 cable pressboard Seal fitting Cover of seal fitting Port plug A Port plug C Earthing device Double fiber Pressure testing valve Insert plate Single Fiber cable pressboard Foundation FOSC cover FOSC bottom Insert plate Bolt of insert plate Bolt for insert plate FOST cover Panel FOSC cover (at 4 corners) Earthing deriving device Drawing 8 Locking hole with female thread on insert plate The location to dismantle percussion Port A Port B Port C Fixing slot for hanging hook FOSC bottom

Horizontal Fiber Optic Splice Closure (FOSC) Installation Manual

Horizontal Fiber Optic Splice Closure (FOSC) Installation Manual Horizontal Fiber Optic Splice Closure (FOSC) Installation Manual 1. Scope of application Installation Manual for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC). The scope of application

More information

B1-OPCL Installation Manual

B1-OPCL Installation Manual Horizontal Fiber Optic Splice Closure (FOSC) B1-OPCL12192 Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC),

More information

Horizontal Fiber Optic Splice Closure (FOSC) FOSC-GPJ-A024. Installation Manual

Horizontal Fiber Optic Splice Closure (FOSC) FOSC-GPJ-A024. Installation Manual Horizontal Fiber Optic Splice Closure (FOSC) FOSC-GPJ-A024 Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC),

More information

SNR-FOSC-H. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-H. Installation Manual

SNR-FOSC-H. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-H. Installation Manual (FOSC) SNR-FOSC-H Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

More information

SNR-FOSC-F. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-F. Installation Manual

SNR-FOSC-F. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-F. Installation Manual (FOSC) SNR-FOSC-F Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

More information

HSC-O1. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC)

HSC-O1. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) HSC-O1 Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) Contents 1.Scope of application 2.Basic structure and configuration 3.Necessary tools for installation 4.Installation flow chart 5.The process

More information

SNR-FOSC-D. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-D. Installation Manual

SNR-FOSC-D. Dome Mechanical Seal Fiber Optic Splice Closure. Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) SNR-FOSC-D. Installation Manual (FOSC) SNR-FOSC-D Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

More information

Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE. Installation Manual

Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE. Installation Manual Dome Mechanical Seal Fiber Optic Splice Closure (FOSC) OT-8903-AE Installation Manual 1. Scope of application This Installation Manual suits for one of the Fiber Optic Splice Closure (Hereafter abbreviated

More information

SNR-FOSC-D-T. Installation Manual SNR-FOSC-D-T. Dome Heat Shrinkable Seal Fiber Optic Splice Closure (FOSC)

SNR-FOSC-D-T. Installation Manual SNR-FOSC-D-T. Dome Heat Shrinkable Seal Fiber Optic Splice Closure (FOSC) (FOSC) SNR-FOSC-D-T Installation Manual 1. Scope of application This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation.

More information

Chengdu Qianhong Communication Co., Ltd. Fiber Optic Splice Closure. GJS03-M8AX-JX-144D-Mechnical Sealing Way.

Chengdu Qianhong Communication Co., Ltd.  Fiber Optic Splice Closure. GJS03-M8AX-JX-144D-Mechnical Sealing Way. Fiber Optic Splice Closure GJS03-M8AX-JX-144D-Mechnical Sealing Way Specification GJS03-M8AX Catalogue General Introduction GJS03-M8AX-JX-144D dome Fiber Optic Splice Closure (FOSC) are mechanical sealing

More information

FOSC-400D5 INSTALLATION INSTRUCTION. Fibre Optic Splice Closure with integrated organiser system

FOSC-400D5 INSTALLATION INSTRUCTION. Fibre Optic Splice Closure with integrated organiser system FOSC-400D5 INSTALLATION INSTRUCTION Fibre Optic Splice Closure with integrated organiser system 1 General 1.1 The installation instruction describes the necessary steps to install the FOSC-400D5. The

More information

FOSC-400A4 INSTALLATION INSTRUCTION

FOSC-400A4 INSTALLATION INSTRUCTION FOSC-400A4 INSTALLATION INSTRUCTION TC-441-IP Rev A, Mar 2017 www.commscope.com Fibre Optic Splice Closure with integrated organiser system 1 General 1.1 The installation instruction describes the necessary

More information

SJOF-BS604A Fiber Optic Splice Closure User Manual Rev.0

SJOF-BS604A Fiber Optic Splice Closure User Manual Rev.0 Fiber Optic Splice Closure VISSEM 1. Introduction 1.1 General VISSEM s SJOF-BS604A protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct

More information

Fiber optic splice closure

Fiber optic splice closure FOSC-450A I N S T A L L A T I O N I N S T R U C T I O N TC-772-IP Rev A, Mar 2017 www.commscope.com Fiber optic splice closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories

More information

FOSC-100 B/H FOSC-100 B2/H

FOSC-100 B/H FOSC-100 B2/H FOSC-100 B/H FOSC-100 B2/H INSTALLATION INSTRUCTION TC-273-IP Rev A, Mar 2017 www.commscope.com Fiber Optic Splice Closure with integrated organizer system 1 1 General 1.1 The installation instruction

More information

COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice 2-2

COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice 2-2 COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly

More information

OPTICAL FIBER CLOSURE

OPTICAL FIBER CLOSURE OPTICAL FIBER CLOSURE INSTALLATION MANUAL STC-HTM Read these instructions carefully and completely before beginning installation. For assistance, contact Technical Support at 82.61.373.7500(South Korea),

More information

19 1HU Splicing and Front Patching Shelf

19 1HU Splicing and Front Patching Shelf FOMS-FPS-O-XXXX-XX I N S T A L L A T I O N I N S T R U C T I O N 19 1HU Splicing and Front Patching Shelf Contents 1 Introduction 2 General 2.1 Characteristics 2.2 Kit contents 2.3 Tools 3 Installation

More information

INSTALLATION INSTRUCTIONS BULL BAR DODGE RAM 1500 PART # B-D1091;B-D2091

INSTALLATION INSTRUCTIONS BULL BAR DODGE RAM 1500 PART # B-D1091;B-D2091 INSTALLATION INSTRUCTIONS PART # B-D1091;B-D2091 PARTS LIST: Qty Description Qty Description 1 Bull Bar 10 12mm Lock Washers 2 Upper Frame Brackets (for trucks without tow hooks only) 8 12-1.75mm Hex Nuts

More information

Cargo Socket Kit. Securely connect connectors and terminals. Failure to do so can result in poor connections.

Cargo Socket Kit. Securely connect connectors and terminals. Failure to do so can result in poor connections. 00 Cargo Socket Kit Fitting Model OUTBACK October 2014 and later Installation Instructions PART No. H6710AL100 J: To those installing this product Important 1. We recommend that you ask the SUBARU dealer

More information

FIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails

FIST-GSS2 FIST-GSS3. Fist Generic Splicing Shelf. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails FIST-GSS2 FIST-GSS3 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 3 Installation of the shelf 3.1 Mounting the shelf

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS TABLE OF CONTENTS GENERAL...2 SPECIFICATIONS...2 PACKAGE CONTENTS...2 PACKAGE CONTENTS: ACCESSORIES...3 REQUIRED TOOLS...3 ADD-ON COMPONENTS...3 CLOSURE MOUNTING...3 LOCK AND UNLOCK EXTERIOR DOOR...3 CABLE

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS 144F TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 2 PACKAGE CONTENTS: ACCESSORIES... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 CABINET MOUNTING WALL MOUNT BRACKET ATTACHMENT...

More information

Previa (RHD) - MMC PZ425-R PART NUMBER INSTALLATION INSTRUCTIONS TOYOTA NAVIGATION SYSTEM. (Production date 05/03)

Previa (RHD) - MMC PZ425-R PART NUMBER INSTALLATION INSTRUCTIONS TOYOTA NAVIGATION SYSTEM. (Production date 05/03) TOYOTA NAVIGATION SYSTEM Previa (RHD) - MMC INSTALLATION INSTRUCTIONS PART NUMBER NAVIGATION KIT 08545-52800 MOUNTING BRACKET FOR **R*R (Production date 05/0) PZ425-R0261-60 Manual ref. n NRR/W-0-0 TOYOTA

More information

No. Tool Vendor P/N. Furukawa FITEL Furukawa FITEL Furukawa FITEL Furukawa FITEL Furukawa FITEL Furukawa FITEL Furukawa FITEL.

No. Tool Vendor P/N. Furukawa FITEL Furukawa FITEL Furukawa FITEL Furukawa FITEL Furukawa FITEL Furukawa FITEL Furukawa FITEL. TOUCH Plus SC Splice-On Connector for Cordage Standard assembly procedure of TOUCH Plus SC Splice-On Connector is as below. Caution : Wear eye protection glasses when handling optical fibers. 1. Preparation

More information

RAV4 TNS310 (Traffic) Plus

RAV4 TNS310 (Traffic) Plus TNS310 (Traffic) Plus RHD installation instructions Model year: 005 Vehicle code: **A3***-*****W Part number TNS310 Plus: Sub wire harness No 1: 08673-64801 Sub wire harness No : 08673-64800 Part number

More information

TOYOTA TUNDRA TVIP V3 (RS3000) Section I - Installation Preparation

TOYOTA TUNDRA TVIP V3 (RS3000) Section I - Installation Preparation Section I - Installation Preparation Part Number: 0886-34861 Section I - Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Status Monitor 3 1 Piezo Buzzer 4 1

More information

COYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (152.4 mm x mm mm x 558.

COYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0 x 22 8.5 x 22 (152.4 mm x mm mm x 558. FEBRUARY 2000 COYOTE CLOSURE ADOBE SERIES FOR UNDERGROUND, AERIAL, AND BURIED SPLICES 6.0" x 22" 8.5" x 22" (152.4 mm x 558.8 mm 215.9 mm x 558.8 mm) Be sure to read and completely understand this procedure

More information

CS Fiber Optic Splice Case. Instruction

CS Fiber Optic Splice Case. Instruction 3 2179-CS Fiber Optic Splice Case Instruction 2179-CS Fiber Optic Splice Case Description 1.0 General 1.1 The 3M 2179-CS Fiber Optic Splice Cases are closures that can be used in buried, underground, aerial,

More information

Supply Valve Replacement

Supply Valve Replacement This procedure is to help facilitate the replacement of the25.1-25.4 supply valves. Solenoid Supply Valves Note: You will need the following tools: Socket Wrench with extension and a 3/8 Socket Size 1

More information

COYOTE. Retrofit Closure. Refinement of the Breed. COYOTE Retrofit Closure. The ideal Closure for replacement or expansion 1-29

COYOTE. Retrofit Closure. Refinement of the Breed. COYOTE Retrofit Closure. The ideal Closure for replacement or expansion 1-29 COYOTE Retrofit Closure COYOTE Closure Series: Section 1 Refinement of the Breed The ideal Closure for replacement or expansion The COYOTE Retrofi t Closure contains a ver sa tile Fiber Management System

More information

OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions

OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions Instruction Sheet 860385855 Issue 3, June 2013 Uniprise Solutions OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures Instructions General Uniprise OFE-CLS-Type Outside Plant (OSP) Fiber Optic Closures

More information

Universal Splice Tray Installation Instructions

Universal Splice Tray Installation Instructions Universal Splice Tray Installation Instructions Table of Contents General Product Information... 1.0 Safety Precautions... 2.0 Package Contents... 3.0 Installing the Product... 4.0 Tower Mounting... 5.0

More information

(W) INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA / SEQUOIA PART # &

(W) INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA / SEQUOIA PART # & (W) INSTALLATION INSTRUCTIONS PART # 501894 & 501895 PARTS LIST: 1 Grille Guard 4 3/8" Flat Washers 1 Driver/Left Frame 2 3/8" Nylon Lock Nuts 1 Passenger/Right Frame 4 12mm Plastic Washers 1 Driver/Left

More information

COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice. 2-2 (440)

COYOTE Splice Case. Value conscious and benefit-packed: The COYOTE Splice. 2-2 (440) COYOTE Splice Case Value conscious and benefit-packed: The COYOTE Splice The combines the field-proven performance of the PREFORMED Splice Case (stainless steel) with the high capacity and craft-friendly

More information

Fiber Connector Shelf (CCS)

Fiber Connector Shelf (CCS) Corning Cable Systems Standard Recommended Procedure (SRP) 003-595 Issue 3, May 2007 Page 1 of 6 Fiber Connector Shelf (CCS) Table of Contents 1. General... 1 2. Precautions... 1 3. Components... 2 4.

More information

TOYOTA RAV TRAILER WIRE HARNESS Section I Installation Preparation

TOYOTA RAV TRAILER WIRE HARNESS Section I Installation Preparation Section I Installation Preparation Part Number: 08921-42900 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Wire harness 3 1 Sub wire harness No.1 4 2 Plastic Tie (300mm) 5 21 Plastic

More information

Section II - Installation Procedures Part Number : Accessory Code IL1 Kit Contents. Color Applicability/Trim Level. Hardware Bag Contents

Section II - Installation Procedures Part Number : Accessory Code IL1 Kit Contents. Color Applicability/Trim Level. Hardware Bag Contents Document # 10.21.00 PIO/DIO 01/14/09 TOYOTA Rav-4 2009- INTERIOR InteriorLIGHT Light UPGRADE Upgrade Part Number : 00016-00065 Accessory Code IL1 Kit Contents Color Applicability/Trim Level Item # Quantity

More information

JANUARY 2015 NOMENCLATURE. TOOLS REQUIRED 3/8" & 7/16" Can wrench or socket 1/4 Nut driver or screwdriver Snips Fiber optic cable opening tools

JANUARY 2015 NOMENCLATURE. TOOLS REQUIRED 3/8 & 7/16 Can wrench or socket 1/4 Nut driver or screwdriver Snips Fiber optic cable opening tools JANUARY 2015 COYOTE Dome Closure 6-1/2" x 17" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product before application. 1 2

More information

06-08 Passenger/Right Top Mounting Bracket Driver/Left Top. Mounting Bracket. Driver/Left Frame Mounting Bracket

06-08 Passenger/Right Top Mounting Bracket Driver/Left Top. Mounting Bracket. Driver/Left Frame Mounting Bracket PARTS LIST: 1 Grille Guard 4 12mm x 44mm OD x 3mm Flat Washers 1 Driver/Left Frame Mounting Bracket 12 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Frame Mounting Bracket 4 12mm Lock Washers 1 Driver/Left

More information

FIST-GSS2. Fist Generic Splicing Shelf MK2. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails

FIST-GSS2. Fist Generic Splicing Shelf MK2. Contents. 1 Introduction. 2 General. 3 Installation of the shelf. 5 Termination of the pigtails FIST-GSS2 I N S T A L L A T I O N I N S T R U C T I O N Fist Generic Splicing Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1

More information

COYOTE Dome Closure 6.5" x 22" Kits. COYOTE Dome Closure 6.5" x 22" for Buffer Tube Applications. Includes: (2) Grommets, (1) Buffer

COYOTE Dome Closure 6.5 x 22 Kits. COYOTE Dome Closure 6.5 x 22 for Buffer Tube Applications. Includes: (2) Grommets, (1) Buffer JANUARY 2015 COYOTE Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1 2 3 6

More information

TOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation

TOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear

More information

COYOTE Closure. Origin of the Species. Key Features: PATENTED 1-14

COYOTE Closure. Origin of the Species. Key Features: PATENTED 1-14 COYOTE Closure Origin of the Species Size L (cm) W (cm) H (cm) 6.0" x 22" 22" (56) 8½" (22) 7" (18) 8.5" x 22" 22" (56) 10-3/4" (27) 9¼" (24) PATENTED Setting the bar against which all other fi ber closures

More information

Heat Shrink closure Non - Pressurized & Pressurized RTSM Dome Closure RLSS RPBS Vault Closure Lead Sleeve Mechanical Closure Pillar Dp Jointing Kit

Heat Shrink closure Non - Pressurized & Pressurized RTSM Dome Closure RLSS RPBS Vault Closure Lead Sleeve Mechanical Closure Pillar Dp Jointing Kit Cable Joint Products Heat Shrink closure Non - Pressurized & Pressurized RTSM Dome Closure RLSS RPBS Vault Closure Lead Sleeve Mechanical Closure Pillar Dp Jointing Kit Compound Splice Filling BOOK 1.indd

More information

COYOTE Terminal Dome Closure 6.5" x 22"

COYOTE Terminal Dome Closure 6.5 x 22 FEBRUARY 2015 COYOTE Terminal Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 25830 2004 MDX Issue Date SEP 2003 PARTS LIST 2 Clips Trailer Hitch Kit: P/N 08L92-S3V-200A Receiver cover Trailer hitch Harness Kit:

More information

Driver Side Support Bracket pictured in "no-tow hook" direction. Reverse direction for tow hook equipped vehicles

Driver Side Support Bracket pictured in no-tow hook direction. Reverse direction for tow hook equipped vehicles PARTS LIST: 1 Bull Bar 2 10-1.5mm x 35mm Hex Bolts 2 Tube Brackets (Bull Bar) passenger or driver side 2 10mm Lock Washers 2 Upper Frame Brackets (models w/o tow hooks only) 4 10mm x 27mm OD x 3mm Flat

More information

3000SC Fiber Optic Splice Closure

3000SC Fiber Optic Splice Closure 3000SC Fiber Optic Splice Closure Protect All Of Your Fiber Optic Splices From Harsh Outside Plant Environments Product Description Our 3000SC Fiber Optic Splice Closure is a sealed, reinforced thermoplastic

More information

Part Number: TBL-016S

Part Number: TBL-016S 5/18/17 TOYOTA TUNDRA 2014-2017 LED Truck Bed Light Kit Part Number: TBL-016S Kit Contents Item # Quantity Reqd. Description 1 2 LED Bed Light Harness (10 ) 2 2 LED Bed Light Harness (5 ) 3 1 Y Harness

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory HITCH Application 2009 CR-V Publications No. AII 40373 Issue Date AUG 2008 PARTS LIST Plain washer, 12 mm Trailer Hitch Kit P/N 08L92-SWA-100 Trailer hitch 6 Spring

More information

FLOODLIGHT unit IMPORTANT WARNING! RRAC055/RRAC059. INSTALL TIME: 30 mins

FLOODLIGHT unit IMPORTANT WARNING! RRAC055/RRAC059. INSTALL TIME: 30 mins LED 4" FLOODLIGHT unit RRAC055/RRAC059 INSTALL TIME: 30 mins Depending on the type of installation chosen, not all components supplied will be used. Refer to Page 13 Section 7 on how to set the angle of

More information

Opti-Guard Splice Enclosure

Opti-Guard Splice Enclosure Opti-Guard Splice Enclosure The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible

More information

Closure End Plates and Accessories

Closure End Plates and Accessories COYOTE Origin of the Species COYOTE Closure Shell Kits 80805258 6.0" (152) x 22.0" (559) COYOTE Shell Kit 80805259 8.5" (216) x 22.0" (559) COYOTE Shell Kit Transition and Buffer Tube Storage Compartments

More information

FIST-GMS2. FIST Generic Mixed Shelf MK2. Contents. 1 Introduction. 5 Termination of the pigtails. 2 General. 6 Splicing + fiber storage

FIST-GMS2. FIST Generic Mixed Shelf MK2. Contents. 1 Introduction. 5 Termination of the pigtails. 2 General. 6 Splicing + fiber storage FIST-GMS2 I N S T A L L A T I O N I N S T R U C T I O N FIST Generic Mixed Shelf MK2 Contents 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Optional extra s 3 Installation of the shelf 3.1 Mounting

More information

Read these instructions thoroughly before attempting to install this option.

Read these instructions thoroughly before attempting to install this option. Rewind Option Kit Installation Instructions This kit includes the parts and documentation necessary to install the Media Rewind option into the following printers: 0XiIIIPlus, 0 dpi 0XiIIIPlus, 00 dpi

More information

Instructions for Use - Opt-X 1000i Enclosure

Instructions for Use - Opt-X 1000i Enclosure 5R1UM-F03, 5R1UM-S03, 5R2UM-F06, 5R2UM-S06, 5R3UM-F09, 5R3UM-F12, 5R4UM-F12, 5R4UM-F15 Instructions for Use - Opt-X 1000i Enclosure 5R1UM-*03 5R2UM-*06 5R3UM-F** 5R4UM-F** Page 1 of 8 Leviton Network Solutions,

More information

Patching & Splicing Shelf. 4.2 Side cable termination directly on the shelf using cable termination plate. IFC cable/break-out cable

Patching & Splicing Shelf. 4.2 Side cable termination directly on the shelf using cable termination plate. IFC cable/break-out cable FIST-GPS2/GPST-12 I N S T A L L A T I O N I N S T R U C T I O N Patching & Splicing Shelf Contents 1 Introduction 2 General 2.1 Kit contents 2.2 Tools 2.3 Optional accessories 3 Installation of the shelf

More information

2015 Ford F150 Rear Bumper w/ LED

2015 Ford F150 Rear Bumper w/ LED 2015 Ford F150 Bumper w/ LED T527990 T527991 PARTS LIST: 1 Bumper Assembly 4 12mm Lock Washers 2 Mounting Brackets 6 12 mm Nylon Lock Nuts 4 Sensor Hole Plugs 8 4mm x 10mm Button Head Bolts 2 Plastic Plugs

More information

COYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications

COYOTE Dome Closure 9.5 x 28 with Transition Tray for High Density Splice Applications OCTOBER 2017 COYOTE Dome Closure 9.5" x 28" with Transition Tray for High Density Splice Applications Be sure to read and completely understand this procedure before applying product. Be sure to select

More information

Scion xb Interior Light Upgrade Part Number: Accessory Code: YI1

Scion xb Interior Light Upgrade Part Number: Accessory Code: YI1 Scion xb 2008 - Interior Light Upgrade Part Number: 00016-00065 Accessory Code: YI1 Kit Contents Item # Quantity Reqd. Description 1 2 12 and 9 rod 2 1 Wire harness 3 1 Hardware Kit 4 2 White Light Engines

More information

MAZDA BT-50 (October 2011 Production Onwards) 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

MAZDA BT-50 (October 2011 Production Onwards) 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS MAZDA BT-50 (October 0 Production Onwards) & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS Installation Time: Approx. 0 Minutes Care Instructions: Clean Tonneau Cover with a mild detergent

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS OUTLAW REAR BUMPER APPLICATION: 2013-2018 Dodge Ram 1500 PART NUMBER: 58-81025 CONTENT ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 REAR BUMPER 18MM WRENCH 2 4 SENSOR L-TAB 5MM

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 3.5 CONTOUR BULL BAR AUTOMOTIVE PRODUCTS, APPLICATION: 0-06 Chevrolet Silverado 500 PART NUMBER: 3-3000, 3-3005, 3-3005T, 3-3090, 3-3095, 3-3095T ITEM QUANTITY DESCRIPTION TOOLS

More information

TOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation

TOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear

More information

COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure

COYOTE 9.5 x 19 (292 mm x 509 mm) Cross-Connect Dome Closure AUGUST 2013 COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product

More information

Toyota Prius Interior Light Upgrade

Toyota Prius Interior Light Upgrade Toyota Prius 2012- Interior Light Upgrade Part Number 00016-00095 Accesory Code: IL2 Conflicts Kit Contents Item # Quantity Reqd. Description 1 1 Y Adapter 2 1 Wire harness 3 1 Hardware Kit 4 2 White Light

More information

B Polyethylene Tape. B Splicing Covering. Holster

B Polyethylene Tape. B Splicing Covering. Holster Splicing Materials B Polyethylene Tape Translucent 8-mil polyethylene tape made from electrical grade base material. Intended for use in restoring the dielectric strength between the core and sheath at

More information

INSTRUCTIONS INSTRUCCIONES CONSIGNES

INSTRUCTIONS INSTRUCCIONES CONSIGNES AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: 2013-UP FORD ESCAPE APP PART # 28-21010, 28-21015 STYLIZED RUNNING BOARD ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 2 RUNNING BOARDS

More information

Pretium Wall-Mountable Housing (PWH-02P/-04P/- 06P/-12P and FZB-02P-JB)

Pretium Wall-Mountable Housing (PWH-02P/-04P/- 06P/-12P and FZB-02P-JB) 1. Precautions 2. Carton Contents Pretium Wall-Mountable Housing OR Fiber Zone Box (FZB-02P-JB) PWH-02P and FZB-02B-JP have: (15 inches) edge grommet (1) Laser warning label (2) Fiber identification labels

More information

LEXUS GX TOWING HITCH Preparation

LEXUS GX TOWING HITCH Preparation LEXUS GX460 2014 - TOWING HITCH Preparation Part Number: PT228-60140 Kit Contents Item # Quantity Reqd. Description 1 1 Hitch Assembly 2 1 Wiring Harness Bracket 3 1 Hardware Bag 4 1 Hitch Cover 5 2 Center

More information

SUT-450-I ASSEMBLY REQUIREMENTS

SUT-450-I ASSEMBLY REQUIREMENTS SUT-450-I Torque wrench, carpenters square, wire cutters, Phillips screwdriver, 7/16, 9/16, and 3/4 combination wrenches, ratchet, 9/16,3/4,13/16, and 7/8 sockets. ASSEMBLY REQUIREMENTS *Torque all T-bolt

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application CR-V Publications No. AII 32953-34081 Issue Date NOV 2006 PARTS LIST 2 Corner sensor clips Backup Sensor Attachment Kit P/N 08V67-SWA-100A Back-up sensor

More information

COYOTE STP (Service Termination Point)

COYOTE STP (Service Termination Point) JANUARY 2017 COYOTE STP (Service Termination Point) Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.

More information

LiteDOT Installation Document

LiteDOT Installation Document LiteDOT Installation Document This document designed to aid in installation of LiteDOT s on Jeep TJ models, other models are similar. NOTE: Installing LiteDOT s on a Jeep where the 2 necessary mounting

More information

VOLKSWAGEN AMAROK MY17> 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

VOLKSWAGEN AMAROK MY17> 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS VOLKSWAGEN AMAROK MY7> & PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS Care Instructions: Clean Tonneau Cover with a mild detergent and water solution. Do not use abrasive cleaners or

More information

INSTRUCTIONS FOR INSTALLING MIND/MOTION SENSOR/E-PORT ON USI ALPINE FOOD MACHINE

INSTRUCTIONS FOR INSTALLING MIND/MOTION SENSOR/E-PORT ON USI ALPINE FOOD MACHINE INSTRUCTIONS FOR INSTALLING MIND/MOTION SENSOR/E-PORT ON USI ALPINE FOOD MACHINE Read these instructions carefully before installing the kit. If you are having problems installing the kit, please call

More information

SCION xd INTERIOR LIGHTING UPGRADE Preparation

SCION xd INTERIOR LIGHTING UPGRADE Preparation Preparation Part Number: PTS21-52085 Light Guide Kit Contents Item # Quantity Reqd. Description 1 1 Controller Board, 4 color programmed w/ Bracket 2 1 RGB, LED Engine wire harness 3 2 14mm Light Rod,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory BACKUP S Application 2012 ODYSSEY Publications No. AII 46724 Issue Date SEP 2011 PARTS LIST Backup Sensor Attachment Kit P/N 08V67-TK8-100A Right center sensor clip

More information

FIBER CONNECTOR SAFETY WARNINGS

FIBER CONNECTOR SAFETY WARNINGS FIBER CONNECTOR SAFETY WARNINGS SAFETY INFORMATION 1. Always wear safety glasses. 2. Isopropyl alcohol is flammable and may cause eye irritation. In case of contact with eyes, flush with water for at least

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS OUTLAW REAR BUMPER APPLICATION: 2016-2018 Chevrolet Silverado 1500 PART NUMBER: 58-81005 CONTENT ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 REAR BUMPER 18MM WRENCH 2 4 SENSOR

More information

OFS 400A FIBER OPTIC INTERCONNECT Instruction Sheet UNIT (FOIU) Comcode INSTALLATION

OFS 400A FIBER OPTIC INTERCONNECT Instruction Sheet UNIT (FOIU) Comcode INSTALLATION OFS 400A FIBER OPTIC INTERCONNECT 636-299-109-01 Instruction Sheet UNIT (FOIU) Comcode 846 586 212 INSTALLATION This instruction sheet covers the 400A1 (106266901) and 400A2 (106414170) Fiber Optic Interconnect

More information

SPC-P Smart Power Connection with Temperature Monitoring Transmitter Pipe Mounted Installation Instructions

SPC-P Smart Power Connection with Temperature Monitoring Transmitter Pipe Mounted Installation Instructions SPC-P Smart Power Connection with Temperature Monitoring Transmitter Pipe Mounted Installation Instructions SPC-P with Pyrotenax MI heating cable using required MI cable grounding kit SPC-P with Raychem

More information

SCION xb 2004 SECURITY (V5) Section I Installation Preparation. Part Number:

SCION xb 2004 SECURITY (V5) Section I Installation Preparation. Part Number: Section I Installation Preparation Part Number: 08586 52960 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Mounting Bracket 3 1 GBS ECU 4 1 Security

More information

VOLKSWAGEN AMAROK 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS

VOLKSWAGEN AMAROK 1 & 3 PIECE HARD TONNEAU REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS VOLKSWAGEN AMAROK & PIECE HARD REMOTE LOCKING KIT INSTALLATION INSTRUCTIONS Care Instructions: Clean Tonneau Cover with a mild detergent and water solution. Do not use abrasive cleaners or solvents. Place

More information

Turn Signal Kit Installation Instructions for Model A Fords & Other Antique Vehicles

Turn Signal Kit Installation Instructions for Model A Fords & Other Antique Vehicles Turn Signal Kit Installation Instructions for Model A Fords & Other Antique Vehicles Lifetime Technical Support support@logolites.com 770-476-7322 www.logolites.com Manual 100-0005N Thank you for purchasing

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Part# 69-0717 AIR IT UP 4 Tire On Board Installed Air Delivery System with Rear Mounted Controller (Requires External Air Source) For the most up-to-date instructions please visit

More information

TOYOTA TUNDRA TVIP V4 REMOTE ENGINE STARTER (RES)

TOYOTA TUNDRA TVIP V4 REMOTE ENGINE STARTER (RES) Preparation Part Number: 08586-OC910 Conflicts Do not install into vehicles without RKE systems. Recommended Sequence of Application Item # Accessory 1 TVIP/RES Any TVIP or RES system 2 XM Radio NOTE:

More information

I-Sheet Number Rev.B 3-1/2 OVAL BULL BAR DODGE RAM 1500

I-Sheet Number Rev.B 3-1/2 OVAL BULL BAR DODGE RAM 1500 PARTS LIST: 1 Bull Bar 2 10-1.5mm x 35mm Hex Bolts 2 Tube Brackets (Bull Bar) passenger or driver side 2 10mm Lock Washers 2 Upper Frame Brackets (models w/o tow hooks only) 4 10mm x 27mm OD x 3mm Flat

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory S P/N 08E10-T2A-100A Application 2013 ACCORD 4-DOOR Publications No. AII 13002 Issue Date SEP 2012 PARTS LIST 2 Self-tapping screws, 5 x 16 mm bracket 2 Self-tapping

More information

This harness kit includes: Installing the Hybrid ReVolt Universal grid charger in an Insight

This harness kit includes: Installing the Hybrid ReVolt Universal grid charger in an Insight Installing the Hybrid ReVolt Universal grid charger in an Insight This harness kit includes: Insight harness (2000 to 2006) (a) 4 #6 mounting screws for bulkhead (c) 2 sheet metal screws for fan board

More information

TOYOTA HIGHLANDER TRAILER WIRE HARNESS Preparation

TOYOTA HIGHLANDER TRAILER WIRE HARNESS Preparation Preparation Part Number: PT219-48111 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Flat 4-pin wire harness 3 5 Plastic tie 4 1 Special plastic tie for stud mount 5 1 Packing 6 2 Bolt

More information

INSTALLATION INSTRUCTIONS FUEL SURGE TANK KIT

INSTALLATION INSTRUCTIONS FUEL SURGE TANK KIT INSTALLATION INSTRUCTIONS FUEL SURGE TANK KIT BMW E46 3-Series, Excl Convertible Document: 19-0056 Support: info@radiumauto.com Relieve fuel pressure in vehicle before beginingthe installation. Disconnect

More information

COYOTE LCC (Low Count Closure)

COYOTE LCC (Low Count Closure) PLP Feature Focus 2009 Preformed Line Products OCTOBER 2012 Film available at www.preformed.com COYOTE LCC (Low Count Closure) Be sure to read and completely understand this procedure before applying product.

More information

AC 110V POWER OUTLET INSTALLATION INSTRUCTIONS. Part No. Application 1. PRE INSTALLATION / INSTALLATION OVERVIEW 2. KIT CONTENTS H7110AJ100

AC 110V POWER OUTLET INSTALLATION INSTRUCTIONS. Part No. Application 1. PRE INSTALLATION / INSTALLATION OVERVIEW 2. KIT CONTENTS H7110AJ100 Part. Application H70AJ00 LEGACY / OUTBACK 0MY w/ HK audio LEGACY / OUTBACK 0MY w/o HK audio AC 0V POWER OUTLET INSTALLATION INSTRUCTIONS Page. -6,9-5 Page. -4,7-5. PRE INSTALLATION / INSTALLATION OVERVIEW

More information

WRSS Wraparound Repair Sleeve Installation Instructions

WRSS Wraparound Repair Sleeve Installation Instructions WRSS Wraparound Repair Sleeve Installation Instructions TECP-30-263. Issue 1. 4/2016 1.0 General Product Information This practice provides information regarding the description and use of Raychem s WRSS

More information

TOYOTA TACOMA 2005 TVIP V5 (RS3200 PLUS) Preparation

TOYOTA TACOMA 2005 TVIP V5 (RS3200 PLUS) Preparation Preparation Part Number: 08586 04840 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Security ECU 3 1 GBS ECU 4 1 Status Monitor 5 2 Warning Labels 6 1 Owner s Manual 7 1 Warranty Card

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Part# 22-7810 Jeep JK/JKU ARB Mounting Kit 2007-2018.5 For the most up to date instructions please visit www.updownair.com www.updownair.com 833 226 4863 IMPORTANT INFORMATION

More information

Please read thoroughly before starting installation and check that kit contents are complete.

Please read thoroughly before starting installation and check that kit contents are complete. Rear Vision System Mirror Display 2013-Current Ram (Kit part number 1009-9518) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit: Rear

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 39890 2009 MDX Issue Date JULY 2008 PARTS LIST Backup Sensor Attachment Kit P/N 08V67-STX-200A Self-tapping screw, 5 x 16 mm 12 Wire

More information