Canada Quote / Order Form Combi

Transcription

1 Canada Quote / Order Form Combi 7105 Northland Terrace Brooklyn Park, MN Ph# Ext 2 Fax# Amy Jorgensen-Inside Sales AmyJ@danetechnologies.com Dealer Information Contact Fax# Company Ph# Address City Date State/Zip Client Information Name Height: Weight: (265 Lbs Max) Accurate weight is important for selection of proper power components Please answer the following questions accurately and completely. Identifying the exact measurements within the diagrams allows for correct configuration and final adjustments for the client. Please do not provide measurements from client's existing chair or cushion! Please be accurate. Weight determines Upper Leg Length- Seat Depth Hip Size- Seat Pan Width While sitting, measure the distance S - M L - XL between the rear point of the bottom and the hollow of the knee 13.75" 19" 18" 23" 13.75" 18" 14.5" 19" 15.25" 19.75" 16" 20.5" 17" 21.25" 17.75" 22" 18.5" 23" While sitting, measure the 15" 19.75" 15" outermost points of the hips " Lower Leg Length While sitting, measure from the leg 14.5" 25" to bottom of heels with shoes on Do not use a cushion Backrest Height Measure the distance between the seating surface and the lower shoulder blade bone "R" Page 1

2 Armrest Height Distance between seat surface 7" 9.75" and bottom of forearm Headrest Height H From the top of seat surface to mid-point back of head "H" Combi Base- K0884 Power wheelchair with the following features as standard: center wheel power base; battery $13, charger; high speed motors- 6.0MPH; multiple power seat functionality; 120 amp electronics; enhanced performace choices; extra strong knee support; shock absorbing suspension system; height adjustable flip-up armrests and flat free tires. Crash tested per ISO 7176/19 & ANSI/REINF WC/Vol 1-Section 19 Batteries- E2361 $ Qty 2- Group 22-55AH Gel Batteries- Installed Wheel Profile Options- Please select preference V Profile for drive and front wheel Block Profile for drive and front wheel N/C N/C Max. Speed 3.7 mph 5 mph 6 mph Joystick Mount Right Left Shroud Colors -- Check preference Special Colors -- Additional charge $ Backrest Options Omit Backrest Traffic Red Red Metallic Orange Reflective Zinc Yellow Green Metallic Lemon Reflective Marine Blue Blue Metallic Silver Reflective Traffic Black Silver Metallic Client can choose alternative backrest- Combi comes standard with dual cane backrest supports Tension Adjust Sling Backrest- K0108 $ V-Trak Standard & Axxis Backrest- E2620 V-Trak Standard Backrest -- 16" High $ V-Trak Standard Backrest -- 24" High $ V-Trak Axxis Backrest -- 12" High $1, V-Trak Axxis Backrest -- 16" High $1, V-Trak Axxis Backrest -- 24" High $1, V-Trak Backrest Adjustable Hardware- E1028 $ Must be ordered with V-Trak Backrest Secondary set of hardware for additional backrest support and stability $ Page 2

3 V-Trak Thoracic Accessories V-Trak Headrest- E0955 V-Trak Thoracic Lateral Pads Large -- 5" x 7"-- Right & Left- E0956 $ V-Trak Thoracic Lateral Pads Medium " x 6"-- Right & Left- E0956 $ V-Trak Thoracic Adjustable Hardware- E1028 $ Must be ordered with V-Trak Lateral Pads V-Trak Headrest Winged $ V-Trak Headrest Simple $ V-Trak Headrest Adjustable Hardware- E1028 $ Must be ordered with V-Trak Headrest V-Trak Backrest Extension 8"- K0108 $ Joystick Options R-Net LCD Color- K0108 Used only on V-Trak Backrest without Push Handle Bar R-Net Remote Color JS -- Jack Sockets -- No Light kit on chair $ R-Net Remote Color JS -- Toggle switches -- No Light kit on chair $ R-Net Remote Color JS -- Jack sockets -- For Light kit on chair $ R-Net Remote Color JS -- Toggle switches -- For Light kit on chair $ Must order Expandable Controller and Harness for Expandable Controller Swing Away Joystick Holder - E1028 $ Joystick Protection Guard- K0108 $ Shock protection for the joystick. Protects hands Compact-Joystick- E2373 $ Compact Advanced JS -Two jack sockets for mode and on/off Does not contain LCD Display. Must order Expandable Controller Expandable Controller - E2377 $ Required when ordering muliple power seating functions; Compact Joystick or other alternative drive controls Must order Harness for Expandable Controller Harness for Expandable Controller- E2313 $ Must be ordered with Expandable Controller Seating Functions Standing Seat System- E2301 $6, Includes standing seat frame with adjustable seat depth; power standing feature; solid seat pan and knee support. Max user weight 265 lbs. Must order Chest Support Belt with Standing Seat System Chest Support Belt- E0960 $ Must be ordered with Standing Seat System Power Seat Lift- E2300 $2, Allows for seat height travel of up to 6 inches Page 3

4 Power Tilt / Power Recline / Power Tilt Table- E1007 $10, Powers to tilt and complete 180 degree recline. Power table to full standing. All functions complete even at full client max weight of 265 lbs. Operates in drive mode in any seating position. Requires the use of a full backrest / headrest accessory system. Must order Power Seat Lift with this feature Power Elevating Legrest- Center Mount- K0108 $2, Allows changing the legrest angle independently of backrest. Fully variable from 90 to 170 degrees Multiple Seat Function Electronic Kit- E2311 $3, Must be ordered when selecting 2 or more seating functions. This kit connects multiple seat functions with wheelchair electronics thru the drive control systems Stand & Drive Legrest Assembly- K0108 1, Must be ordered with Standing Seat System. Includes 1-piece flip-up footplate-10.6" deep and angle adjustable. See footplate options for alternative footplate choices Choose footplate angle Footplate Options Small Footplate- K0108 $ Depth 7.9". This option reduces the total chair length from the standard 10.6" footplate. Includes height adapter which allows height to be adjusted quickly & easily Oversize Footplate- K0108 $ Depth 8.6". A wider support surface increases stability. Can only be used with lower leg length of 13.5" or LESS. Includes height adapter which allows height to be adjustedd quickly and easily Foot Protection Frame- K0108 $ Additional safety bar Foot Guides- K0108 Small Right $ Allows individual foot adjustment to accommodate Small Left $ client needs while increasing stability Large Right $ Large Left $ Footrest Wedge- K0108 Wedge to help straighten and stabilize feet 2.0" x 4.0" x 3.1" $ " x 5.0" x 3.1" $76.00 Non-Slip Footrest Surface- K0108 $ Knee Support Options Rectangular Conical 2" x 4" $ " x 4" x 4" $ " x 4" $ " x 5.5" x 4" $ " x 4" $ " x 7" x 4" $ " x 6" $ " x 6" $35.00 Page 4

5 Knee Support PRO- K0108 $ T-Bar design set into steel support holder enhances stability and rigidity Easily removable by one hand for transfers. Knee pads are individually adjustable by height and width. Choose one of two pad sizes below Foam size S (4" ") Foam size M (5" ") Alternative Drive Options Joystick-Top- Customized Control Grips- E2323 Buddy Button- K0108 T-bar $ Mushroom $ Stick $ Chin $ Softball $ Ball $ Green - On/Off $ Yellow - Mode Switch $ Red- Emergency Stop $ Dual Attendant Module- E2331 $1, Allows for attendant operation of all functions R-Net Connector Block- K0108 $ Required to connect additional steering devices; i.e, Dual Attendant Module; Chin Controls or Omni Control Module Bluetooth Mouse Module- K0108 $ Bluetooth communication for PC Mouse Control- 10 mile operating range Small robust module; compatible with all R-Net input devices Programmable user preferences IOM-Module- E2351 $1, I/O Module allows the client to control an external device, such as an ECU; Communication Device; Head Array, etc. One I/O unit is necessary for each external device. Up to three I/O Modules can be installed on chair Omni Control Module- K0108 $2, Used as an interface for special controls. Can control all power chair functions General R-Net interface for specialty controls; large, hi-resolution color display; infra red (IR) control as standard; dual channel inputs; user selectable display - indoors / outdoors; customizable user menu; large, easy to read icons; programmable user text; on-board configuration and programming. Compatible with all R-Net input devices Must order Flexible Arm or Joint Arm Adapter for mounting Must order Expandable Harness Must use an input device such as the Standard JS; Compact Joystick; Head Array or use of a 9-pin, sub-d connector device ` Arms to adapt the Omni Control Module Flexible Arm including Hardware Adapter- K0108 $ Adjustable Joint Arm including Hardware Adapter- E1028 $ Page 5

6 Chin Control Shoulder Harness- K0108 $ Shoulder / Chest Harness with upholstery. Height, width and angle adjustable. Mounted on back of canes. Longer joystick cable and Buddy Buttons included ; Compact Joystick & Harness Swing Away Hardware Harness Swing Away Hardware- E1028 $ Power Adjustable / Swing Away Chin Control Extension- K0108 Call for price Includes Power Swing Away Mount; longer joystick cable; Compact Joystick; Adjustable Hardware and R-Net Connector Block Accessories Foam Seat Cushion with Seat Cushion Cover- E2601 Additional Seat Cushion Cover- E2619 Seat Cushion $ Additional Seat Cushion Cover $ Skirt Guard- K0108 $ Easy to remove for lateral transfer- Right & Left side Thigh Support Pads- E0956 Thigh Support Adjustable Hardware- E1028 Thigh Support Pads Right & Left $ Thigh Support Adjustable Hardware Right & Left $ Can be adjusted by angle and height. Supports the thigh and stabilizes legs in seating and standing position Chest Role- K0108 $ Height adjustable. Offers additional support but does not replace the Chest Suppot Belt Backrest Extension 6"- K0108 $ Used only on Standard Tension Adjust Sling Backrest V-Trak Backrest Extension 8"- K0108 $ Used only on V-Trak Backrest without Push Handle Bar Upholstered Backrest Extension- K0108 Used to increase length of back canes to adjust height of Length 5.9" $ Push Handle Bar location Length 9.8" $ Cannot be used with V-Trak Backrest Length 13.8" $ Push Handle Bar- K0108 $ Can be used with Tension Adjust Sling Backrest and V-Track Backrests Helps for manual pushing of the wheelchair Table Tray / Fixed- E0950 $ Supporting hardware installed on the armrest. Easily attached and removed Page 6

7 Table Tray / Swing Away Table swings away and down to the side Table Tray- E0950 $ Swing Away Hardware- E1028 $ Curb Climber- K0108 $1, Front castor fork with double wheel. For curb climbing up to 3.2" Outdoor / Travel Accessories Lights and Indicators- K0108 $1, Turn signals, brake lights, and lamps for on road use Vehicle Tie-Down Kit- K0108 $ Secure tie-down for vehicle transport EZ Lock Bracket- K0108 $1, Combi certified per ISO 7176/19 & ANSI/REINF WC/Vol 1-Section 19 crash test standards. Brackets and pin for chair base only Does not include the docking station for the vehicle Rearview Mirror- K0108 $ Joystick side Opposite side Chair Order Policy Contact LEVO USA at LEVOUSA with any questions regarding how to accurately complete this form. LEVO USA is not responsible for configuration or size discrepancies resulting from inaccurate or incomplete information provided on the order form. Order confirmations will be sent to you. Please review and sign your agreement/confirmation authorizing submission of the order as stated. Return the signed copy to LEVO USA at fax number or via at: amyj@danetechnologies.com. All chairs are built to specifications provided, therefore, all sales are final. No returns or exchanges. Your signature acknowledges your understanding and acceptance of this no return policy. Customer is responsible for full payment of chair shipped based on specifications provided on confirmed order form. All prices listed on form are US Dollars and all payment to be made in US Dollars. Please note: All prices and specifications provided on form are subject to change without prior notice. All prices for options or accessories on order form are only valid if ordered with the chair or prior to completed production of unit. Any chair modifications, options or accessories required for future use or maintenance of chair will carry different pricing and warranty terms. Warranty Policy Your LEVO product is guaranteed from the date of purchase for: Two years covering all material and manufacturing defects of mechanical parts; One year covering all electronic components including the motors; Batteries are excluded from the warranty; LEVO USA will not repair or replace free of charge any part or parts found to be defective due to abuse, misuse or lack of maintenance. Page 7