AUTOMOTIVE BKP. Spring-top snap nozzles with Kevlar coating NOZZLES. Technical data sheet APPLICATIONS
|
|
|
- Lizbeth Matthews
- 5 years ago
- Views:
Transcription
1 AUTOMOTIVE Technical data sheet NOZZLES BKP Spring-top snap nozzles with Kevlar coating APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES The fold-over nozzle is oval shaped with a Kevlar coated for maximum manoeuvrability and resistance. It is manually activated and can be easily connected to mufflers situated very close to the bumpers. It returns to the closed position when not in use, saving energy and limiting the level of sound. CERTIFICATIONS 58
2 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 59 Powered by TCPDF (
3 AUTOMOTIVE Technical data sheet NOZZLES BA Steel nozzles APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES The models are manufactured from AISI 304 stainless steel to guarantee resistance to high temperatures. BA allows the air extraction circuit to be closed when the system is not in operation, optimising centralised air extraction systems and results in lower energy consumption. CERTIFICATIONS 60
4 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 61 Powered by TCPDF (
5 AUTOMOTIVE Technical data sheet NOZZLES BAP Steel nozzles APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES The models are manufactured from AISI 304 stainless steel to guarantee resistance to high temperatures. BAP allows the air extraction circuit to be closed when the system is not in operation, optimising centralised air extraction systems and results in lower energy consumption. CERTIFICATIONS 62
6 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 63 Powered by TCPDF (
7 AUTOMOTIVE Technical data sheet NOZZLES BGIM Rubber nozzles with clamp APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES In neoprene rubber: resistant to high temperatures. They are soft and adaptable even with large diameters, with dual exhausts. Clamps for locking to the muffler or self-supporting diaphragm caps for closing the extraction circuit. CERTIFICATIONS 64
8 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 65 Powered by TCPDF (
9 AUTOMOTIVE Technical data sheet NOZZLES BGNP Rubber nozzles with clamp APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES In neoprene rubber: resistant to high temperatures. They are soft and adaptable even with large diameters, with dual exhausts. Clamps for locking to the muffler or self-supporting diaphragm caps for closing the extraction circuit. CERTIFICATIONS 66
10 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 67 Powered by TCPDF (
11 AUTOMOTIVE Technical data sheet NOZZLES BGNT Rubber nozzles with diaphragm cap APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES In neoprene rubber: resistant to high temperatures. They are soft and adaptable even with large diameters, with dual exhausts. Clamps for locking to the muffler or self-supporting diaphragm caps for closing the extraction circuit. CERTIFICATIONS 68
12 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 69 Powered by TCPDF (
13 AUTOMOTIVE Technical data sheet NOZZLES BGO Rubber nozzles APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES In neoprene rubber: resistant to high temperatures. They are soft and adaptable even with large diameters, with dual exhausts. Clamps for locking to the muffler or self-supporting diaphragm caps for closing the extraction circuit. CERTIFICATIONS 70
14 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 71 Powered by TCPDF (
15 AUTOMOTIVE Technical data sheet NOZZLES BFS Nozzles with activated carbon filter APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES On vehicles which are moved within closed environments (car showrooms, dealerships, etc.) thanks to the activated carbon cartridges. CERTIFICATIONS 72
16 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 73 Powered by TCPDF (
17 AUTOMOTIVE Technical data sheet NOZZLES BIP 1 Pneumatic nozzles APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES Membrane pneumatic system, resistant to extremely high temperatures. Manually operated or with compressed air. This system can be quickly fitted to the internal exhaust pipe (muffler), it is resistant and will not damage metal parts. CERTIFICATIONS 74
18 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 75 Powered by TCPDF (
19 AUTOMOTIVE Technical data sheet NOZZLES BIP 2 Pneumatic nozzles APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES Membrane pneumatic system, resistant to extremely high temperatures. Manually operated or with compressed air. This system can be quickly fitted to the internal exhaust pipe (muffler), it is resistant and will not damage metal parts. CERTIFICATIONS 76
20 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 77 Powered by TCPDF (
21 AUTOMOTIVE Technical data sheet NOZZLES BOP 1 Pneumatic nozzles APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES Membrane pneumatic system, resistant to extremely high temperatures. Manually operated or with compressed air. This system can be quickly fitted to the external exhaust pipe (muffler), it is resistant and will not damage metal parts. CERTIFICATIONS 78
22 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 79 Powered by TCPDF (
23 AUTOMOTIVE Technical data sheet NOZZLES BOP 2 Pneumatic nozzles APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES Membrane pneumatic system, resistant to extremely high temperatures. Manually operated or with compressed air. This system can be quickly fitted to the external exhaust pipe (muffler), it is resistant and will not damage metal parts. CERTIFICATIONS 80
24 DIMENSIONS PACKAGING WEIGHT 2 KG VOLUME m³ 0.02 (25X25X34 cm.) QR CODE 81 Powered by TCPDF (
25 AUTOMOTIVE Technical data sheet NOZZLES BLP Special nozzles for vertical exhausts APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. CERTIFICATIONS 82
26 DIMENSIONS PACKAGING WEIGHT 15 KG VOLUME m³ 0.41 (225X27X67 cm.) QR CODE 83 Powered by TCPDF (
27 AUTOMOTIVE Technical data sheet NOZZLES BRA Positioners APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. CERTIFICATIONS 84
28 DIMENSIONS PACKAGING WEIGHT 15 KG VOLUME m³ 0.72 (120X80X75 cm.) QR CODE 85 Powered by TCPDF (
29 AUTOMOTIVE Technical data sheet NOZZLES BRV Positioners APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. CERTIFICATIONS 86
30 DIMENSIONS PACKAGING WEIGHT 10 KG VOLUME m³ 0.23 (61X61X61 cm.) QR CODE 87 Powered by TCPDF (
31 AUTOMOTIVE Technical data sheet NOZZLES KIT AS CAR Special nozzle for vehicles with dual exhaust APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. CERTIFICATIONS 88
32 DIMENSIONS PACKAGING WEIGHT 5 KG VOLUME m³ 0.23 (61X61X61 cm.) QR CODE 89 Powered by TCPDF (
33 AUTOMOTIVE Technical data sheet NOZZLES POG Positioners APPLICATIONS These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to determine the model with the features most suitable to the specified use. The special versions allow problems relating to special means to be resolved. FEATURES They connect rubber hoses in exhaust gas extraction systems, above all in the automotive sector, for better adaptation to the new generation of mufflers integrated into the bodywork of the different automotive manufacturers. The wide range included in the catalogue covers every need required by the market, even including special systems for REV overhauls where pulling hose runners with automatic nozzle releases is required. CERTIFICATIONS 90
34 DIMENSIONS PACKAGING WEIGHT 15 KG VOLUME m³ 0.72 (120X80X75 cm.) QR CODE 91 Powered by TCPDF (
Spare parts list SV 7 *EU Home and Garden \ Steamer \ SV 7 *EU \ Spare parts list SV 7 *EU. Page 1 / 8
Home and Garden \ Steamer \ SV 7 *EU \ Page 1 / 8 Home and Garden \ Steamer \ SV 7 *EU \ Page 2 / 8 Home and Garden \ Steamer \ SV 7 *EU \ Page 3 / 8 Home and Garden \ Steamer \ SV 7 *EU \ Page 4 / 8 Home
SPECIAL SERIES XL E. New high-pressure water blasting units with 30 kw electric motor
SPECIAL SERIES XL E New high-pressure water blasting units with 30 kw electric motor Easy Power XL: the best answer More power for fast and effect to all your requirements ive operations POWERED BY Brand
ARTICULATED EXTRACTION ARMS ARMOFLEX ARMOTECH 03-05 06-08 PORTABLE UNITS PORTABLE EXTRACTION UNIT FACILE 26-28 IBS PAB 09-11 12-13 PORTABLE UNITS AER 101 AER 102 29-30 31-32 WALL-MOUNTED PURIFICATION SYSTEM
Spare parts list ( ) Spare parts list KM 100/100 Bat
Spare parts list (5.963-738.0) Spare parts list KM 100/100 Bat 15.04.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list KM 100/100 Bat (5.963-738.0)... 6 10 Frame (0.209-732.0)...
S 561. Giuliano Industrial S.p.A.
Truck tyre changer 13"-27" for mobile tyre service Truck tyre changer for mobile service of truck, bus and road transportation vehicle tyres with 13"-27" rim (max. wheel diameter 1600 mm./63"; max. wheel
SPARE PARTS LIST BLOWERS 570 BTS,
SPARE PARTS LIST BLOWERS 570 BTS, 2011-05 ACCESSORIES 570 BTS, 2011-05 ACCESSORIES 570 BTS, 2011-05 Ref Part No Description Remark QTY KIT 1 521 53 30-01 SOCKET 1 2 544 40 00-04 HANDLEBAR ASSY 1 3 537
INDUSTRY COMBO MF. Combined filter modules for fumes and particulate, combined composition of multiple modules to increase filtering capacity
INDUSTRY Technical data sheet FILTER MODULES COMBO MF Combined filter modules for fumes and particulate, combined composition of multiple modules to increase filtering capacity APPLICATIONS The COMBO MF
GHIBLI. Plastic Welding > Hand tools > GHIBLI. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
GHIBLI Universal tool for welding and shrinking. Two-step air flow switching and stepless temperature. - Universal tool for welding and shrinking - Welding results independent of voltage fluctuations and
December Mercedes 220 SE - 250SE - Coupe Parts
December 2018 Mercedes 220 SE - 250SE - Coupe Parts Table of Contents TERMS AND CONDITIONS PRICES: Mercedes->220 SE - 250SE - Coupe->Accessories Mercedes->220 SE - 250SE - Coupe->Body Panels Mercedes->220
Spare parts list ( ) SPARE PART LIST EXPERT SERIES (Loncin)
Spare parts list (8.919-113.0) SPARE PART LI EXPERT SERIES (Loncin) 09.05.2015 www.kaercher.com EN Table of contents SPARE PART LI EXPERT SERIES (Loncin) (8.919-113.0)... 6 10 FRAME... 7 20 PUMP SET...
ADVANCED FLUID MANAGEMENT SOLUTIONS. Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI GARANZIA WARRANTY.
ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 ANNI DI 5 YEARS WARRANTY GARANZIA Made In Italy Industrial piston pumps TECHNICAL CHARACTERISTICS Strength points
BULLETIN OCTOBER DeZURIK ROTARY DIAPHRAGM ACTUATORS
BULLETIN 70.00-1 OCTOBER 2012 DeZURIK ROTARY DIAPHRAGM ACTUATORS 2 2012 DeZURIK, Inc. Design & Construction DeZURIK rotary diaphragm actuators are available for use on rotary control valves including:
Introduction. Globe and Angle Body Control Valves. In Line Valve provides Solutions to Flow Control
Introduction Globe and Angle Body Control Valves In Line Valve provides Solutions to Flow Control In Line Valve Globe Control Valves use the variable area generated between the plug and seat to control
Aircraft cleaning systems. Professional cleaning solutions applicable in the development and operation of aircrafts. Cleaning prototypes
Aircraft cleaning systems Professional cleaning solutions applicable in the development and operation of aircrafts Cleaning prototypes Cleaning machines for the aircraft industry From passenger airplanes
Table of contents. Copyright ANDREAS STIHL AG & Co. KG 2017 (2)
0-0 D-GB Table of contents MS, MS C Crankcase Cylinder, Muffler Oil pump, Clutch Chain brake Ignition system, Wiring harness Rewind starter Tank housing AV system, Handlebar Shroud, Housing Carburetor
Mobile crane LTM Max. lifting capacity: 35 t Max. lifting height: Max. working radius: 40 m. Courtesy of Crane.Market
Mobile crane Max. lifting capacity: 35 t Max. lifting height: 44 m Max. working radius: 40 m Mobile crane Compact and economic 2 A long telescopic boom, high capacities, an extraordinary mobility as well
INDUSTRIAL DYEING PUMPS
INDUSTRIAL DYEING PUMPS ADVANCED FLUID MANAGEMENT SOLUTIONS Sturdy and reliable industrial and diaphragm pumps. 5 YEARS ANNI DI WARRANTY GARANZIA Made In In Italy HELP THE NATURE Packaging contains, depending
10 SPARE PART LIST - G 3000 X
Table of contents G 3000 X (1.107-385.0) 10 SPARE PART LI - G 3000 X 10 FRAME 20 PUMP 1 Cylinder head 8 SPARE PART LI NOZZLE INS 020/021 PUMP (9.139-372.0) 9 Spare part set chemistry (2.883-82.0) 10 Drain
Rubber nozzles for Exhaust
Exhaust Extraction Rubber nozzles for Exhaust GEOVENT A/S offers a number of nozzles for extraction of exhaust fumes, for example, in garages or other places where you need to start vehicles indoors. The
It also has provision to connect a dust extraction system via the side vent when heavy sandblasting is required.
SB-200 - Sandblasting Cabinet + Garnet Package Deal Recommended to be used with dust collector Package Deal Ex GST Inc GST $300.00 $330.00 Package Contents - SAVE $16.50 (Inc) 1 x S289 - SB-200 Sandblasting
Hydraulic NC Guillotine & NC Panbrake Package Deal
Product Brochure K062 METALMASTER HG-840B & PB-830A Hydraulic NC Guillotine & NC Panbrake Package Deal Ezy-Set NC-89 Guillotine - 2500 x 4mm, Ezy-Set NC-89 Panbrake 2500 x 4mm Page 1 of 5 Specifications
Lubrication and fluid supply systems and components
Lubrication and fluid supply systems and components grease lubricants fuel hydraulic fluids compressed air water water based fluids THE GUARANTEE OF A LEADING MANUFACTURER With close to half a century
Painting. Spray. Technology. COMPANY PROFILE
Spray Painting AF DESIGN 04.2016 Technology www.fbm-system.it FBM s.r.l. Zona Industriale Fonte Cupa - 06035 Gualdo Cattaneo - PG - Italy Tel./Fax: +39 0742 91362 info@fbm-system.it COMPANY PROFILE Welcome
frame, spindle case dated: 01/17
frame, spindle case dated: 01/17 1 Powered by TCPDF (www.tcpdf.org) frame, spindle case dated: 01/17 Item no. Description Article no. Quantity 1 Caution sticker RO 87080 1 2 Caution plate RO 87081 1 3
Lubrication and fluid supply systems and components
Lubrication and fluid supply systems and components grease lubricants fuel hydraulic fluids compressed air water water based fluids THE GUARANTEE OF A LEADING MANUFACTURER Samoa Industrial was established
Flowrite TM AP 599 Series 8-inch Pneumatic Valve Actuator
Flowrite TM AP 599 Series 8-inch Pneumatic Valve Actuator Technical Instructions Document No. 155-161P25 AP 599-1 Description Features Application The Flowrite AP 599 Series 8-inch pneumatic valve actuator
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
PH3100Ri Powerhouse Inverter Generator
PH3100Ri Powerhouse Inverter Generator Powerhouse Inverter Generator PH3100Ri 1. 7504 69449 Engine Assembly 1 2. 09080104 69500 Cable holder 1 3. 03050221 69350 M6 x 12 flange bolt 1 4. 03050241 69349
WE PROVIDE SOLUTIONS. English
WE PROVIDE SOLUTIONS 111 English Garage Hose Reels Monitoring Systems Hose End Controls Accessories Mobile Units Waste Oil Equipment Pumps Service Stands & Towers We are in the frontline of lubrication
PNEUMATIC ACTUATED GLOBE VALVES TORK LV 3000 SERIES
fluid fluid under under control PNEUMATIC ACTUATED GLOBE VALVES TORK LV 3000 SERIES TORK LV 3000 SERIES SO RELIABLE YOU COULD FORGET WHERE, WHEN, HOW IT WORKS. TORK LV 3000 SERIES A NEW CONTROL VALVE
Drawing A Crankcase, Cylinder
Drawing A Crankcase, Cylinder 1 Drawing A Crankcase, Cylinder Reference Item number Qty Description 1 4241 021 0300 1 Crankcase 2 9639 003 1230 2 Oil seal 12x22x7 3 9523 003 0000 2 Grooved ball bearing
PRODUCT CATALOGUE.
PRODUCT CATALOGUE www.polnacorp.eu content PRODUCTION PROGRAMME OVERVIEW POLNA Corp. s.r.o. started up with entry in the business register in 1998 and its main purpose is to be a reliable partner in the
MT SERIES PNEUMATIC ROTARY ACTUATORS
MT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
ConstructionParts.com
Main assy, engine plate and lower part 18213-2 6 Main assy, engine plate and lower part Item Part No Rem Qty Description 1 D391218-01 1 Engine plate 2 Handle ( Page 60 ) 3 Ground plate and eccentric element
Installation instructions
Installation instructions Akrapovič Exhaust System: Carbon Fiber Mirror Cap Set for the BMW M2 (type F87) ENGLISH Version 1.0 08/2016 www.akrapovic.com Installation instructions Akrapovič Exhaust System:
Maxifluss Rotary Plug Valve - VETEC Type 82.7
Valve Size NPS 1 to 12 ANSI Pressure Class CL 150 and 300 Temperature Range of Medium -320 F to +1022 F (-196 C to +550 C) Valve Body Material Cast carbon steel Low temperature carbon steel Cast stainless
Pressure reducing valves
Pressure reducing valves Pilot Operated 25 Series The Spirax Sarco 25-Series regulators are a versatile family of self-acting pressure regulators with control pilots and interchangeable main valves for
PARCOL 1-X-210 SERIES DIAPHRAGM PNEUMATIC ACTUATORS
1X210 SERIES DIAPHRAGM PNEUMATIC ACTUATORS 1X210 SERIES DIAPHRAGM PNEUMATIC ACTUATORS Fig. 1 Model 1X211 (type 600) reverseacting actuator 1X210 Series pneumatic diaphragm actuators are manufactured by
UT SERIES PNEUMATIC ROTARY ACTUATORS
UT SERIES PNEUMATIC ROTARY ACTUATORS Toll Free 1.888.842.9998 Fax 1.866.842.3144 6 FEATURES COMPACT DESIGN The MAX-AIR rack & pinion pneumatic actuator produces linear torque output in a compact design
HP5. Heated Probe. Heated Probe for Micropollutants sampling. Main characteristics
Heated Probe HP5 Heated Probe HP5 Main characteristics Heated sampling probe for the determination of particulate matter and chemicals in the gas phase. It s unique design, combined with the clamps-free
Spare parts list ( ) Spare parts list Saber Blade EN
Spare parts list (5.971-014.0) Spare parts list Saber Blade 12 2011-06-17 EN Table of contents Spare parts list Saber Blade 12 (5.971-014.0)... 3 10 Housing (0.105-891.0)... 4 20 Tank (0.105-892.0)...
FX 27. Zero Turn AGRIGARDEN MACHINES. A Hydrostatic Ride-On Mower With Mulch And Rear Discharge Cutter Deck
Zero Turn A Hydrostatic Ride-On Mower With Mulch And Rear Discharge Cutter Deck AGRIGARDEN MACHINES Grillo guarantee the reliability and quality of all their products AGRIGARDEN MACHINES Grillo design
Spare parts list ( ) SPARE PART LIST KÄRCHER PRO SERIES
Spare parts list (8.923-377.0) SPARE PART LI KÄRCHER PRO SERIES 09.05.2015 EN Table of contents SPARE PART LI KÄRCHER PRO SERIES (8.923-377.0)... 3 10 FRAME... 4 20 PUMP SET... 6 30 MOTOR... 8 40 ACCESSORIES...
Semmco Alpha 30. Features. Technical data sheet
Equipment includes options and extra equipment. Features is a diesel hydraulic mobile concrete sprayer designed for tunnel profiles up to 7 m in height and 9 meters in width. The maximum longitudinal spraying
5 TANK ¾ VALVE AND 6 TANK 1 VALVE HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS
HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS Standard ColourRHEADER TANK SOLUTIONS DESCRIPTION The patented Mecair Full Immersion System consists of a round header tank with fully integrated diaphragm
ADVANCED FLUID MANAGEMENT SOLUTIONS. An overview of the RAASM world 5 YEARS WARRANTY. Made In Italy
ADVANCED FLUID MANAGEMENT SOLUTIONS An overview of the RAASM world 5 YEARS WARRANTY Made In Italy ADVANCED FLUID MANAGEMENT SOLUTIONS The complete range of our products is presented in the specific catalogues:
Clean. Compact. Capable.
Clean. Compact. Capable. The CUBE from CEMO. Diesel, AdBlue or Lubricant Station. Technical Data CEMO CUBE-Tank Description Capacity l External Dimensions cm (w x d x h) Weight kg CUBE-Tank, dispensing
April 2019 Triumph Parts
April 2019 Triumph Parts Table of Contents Triumph-> Vignale->Emblems Triumph-> Vignale->Engine Triumph-> Vignale->Glass and Seals Triumph-> Vignale->Lights Triumph->Other Triumphs Triumph->Other Triumphs->Brakes
Series 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
BULLETIN B JANUARY DeZURIK ROTARY DIAPHRAGM ACTUATORS TECHNICAL SPECIFICATIONS
ULLETIN 70.00-1 JNURY 2017 DeZURIK ROTRY DIPHRGM CTUTORS TECHNICL SPECIFICTIONS Materials of Construction DR-40 Item Description Material 1 Diaphragm Cover 316 Stainless Steel, STM 240/276 13 15 20 5 29
10 TANK WITH 2 VALVE HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS
HEADER TANK SOLUTIONS PENTAIR CLEAN AIR SYSTEMS Standard ColourR FULL IMMERSION SYSTEM DESCRIPTION The patented Mecair Full Immersion System consists of a round header tank with fully integrated diaphragm
AVP : Pneumatic valve actuators
71.247 Product data sheet AVP 242...244: Pneumatic valve actuators How energy efficiency is improved Precise valve activation with only the slightest air requirement Features Activation of 2-way and 3-way
AATVP. Accessories HIGH PRESSURE FANS HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES:
AATVP HIGH PRESSURE WITH BACKWARD IMPELLER AND BELT TRASMISSION MANUFACTURING FEATURES: Accessories Fan made of Fe36 sheet. The fan paint finish is based on a Qualicoat polyester powder coating stoved
January 2018 Citroen Parts
January 2018 Citroen Parts Table of Contents TERMS AND CONDITIONS PRICES: Citroen->2 CV->Bumpers Citroen->2 CV->Electrical and Ignition Citroen->2 CV->Emblems Citroen->2 CV->Engine Citroen->2 CV->Glass
37/38 Pneumatic Spring Diaphragm Actuator
GE Oil & Gas Technical Specifications 05/2013 Masoneilan* Valves 37/38 Pneumatic Spring Diaphragm The 37/38 Series actuator is designed to provide high performance, reliability and long service life. Features
Rapid doors.
Rapid doors EN www.ditecentrematic.com PERFO RMING SAFE The Ditec rapid industrial flexible doors are simple and easy to adapt to the most diverse requirements and guarantee functionality, safety and efficiency,
3/2 Way Pilot Valve 3/2 Way Solenoid Valve 1 /4" and 1 /2" 5/2 Way Solenoid Valve 1 /4" 6/2 Way Solenoid Valve 1 /4" 5/3 Way Solenoid Valve 1 /4"
/2 Way Pilot Valve /2 Way Solenoid Valve 1 /" and 1 /2" 5/2 Way Solenoid Valve 1 /" 6/2 Way Solenoid Valve 1 /" 5/ Way Solenoid Valve 1 /" General The solenoid valves consist of one or two /2 way pilot
D 40 ALUMINIUM (CLAMPED)
www.tablapump.com A COMPLETE RANGE OF AIR DIAPHRAGM PUMPS CONGRATULATIONS ON PURCHASING YOUR NEW TABLA PUMP! IMPORTANT: Please read all the installation and safety information carefully before you start
Machine shut-off nozzle for Elastomer; Type-E Integrated actuator and tempering system
Machine shut-off nozzle for Elastomer; Type-E Integrated actuator and tempering system Application: Elastomeric plastics Shut-off technique: Integrated two way pneumatic actuator Characteristics: Integrated
October 2018 Alfa Romeo 1900 SS Touring Parts
October 2018 Alfa Romeo Parts Table of Contents Alfa Romeo-> Alfa Romeo->->Brakes Alfa Romeo->->Electrical and Ignition Alfa Romeo->->Emblems Alfa Romeo->->Engine Alfa Romeo->->Engine Compartment Alfa
G5200. Fig.1 POWER UNIT
CHAIN SAW 5200 Fig.1 POWER UNIT Fig.1 POWER UNIT Key# PART NUMBER DESCRIPTION NOTE 1 2880-12111 Cylinder 1 ø45 2 2880-14111 Inlet Pipe 1 3 2880-14120 Spring 5 2880-14150 Inner Guide 1 6 2670-14311 Bracket
2017 big trailers series. grape trailers
2017 big trailers series grape trailers grape trailer 1 DOUBLE TWO-WAY TIPPING DUMPER DOUBLE VAT Standard equipment: AISI 304 floureshed stainless steel body. Hydraulic two-way tipping system. Indipendent
INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT
Tabella 1 Code CM-00001 Code R0001 R0002 R0003 R0004 R0005 R0006 R0007 R0008 R0009 R0010 R0011 R0012 R0013 R0014 R0015 R0016 R0017 R0018 R0019 R0020 R0021 R0022 R0023 R0024 R0025 R0026 R0027 R0028 R0029
Hot Tapping Products
Hot Tapping Products HMT Series Hot Tapping Machines The Hydratight MHT range is designed for ease of use in making 3 60 inch (76 1524mm) taps into various material pipelines and tanks with the ability
GLOBE 2 WAY CONTROL VALVE SERIES - 110
ACAD/PVCT/PVCT - 1 GLOBE WAY CONTROL VALVE SERIES - 1 INTRODUCTION This type of Valve with its classic globe body shape, which reflects its name, uses the variable area generated between the plug and seat
REASON: Provide the necessary instructions to replace the subject crushable bumper assembly.
X TRANSLATION OF BOLLETTINO TECNICO The technical content of this document is approved under the authority of DOA nr. EASA.21J.005. N 109K-43 DATE September 21, 2005 REV. xx xx Compliance with this bulletin
GT32 Series Shielded connector for high speed transmission / USB3.0, HDMI For Network, High speed communication
Sep..208 Copyright 208 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. GT32 Series ---- Shielded connector for high speed transmission / USB3.0, HDMI.4 ---- Features Full shielded structure Suitable for
November 2017 Citroen Parts
November 2017 Citroen Parts Table of Contents Citroen->2 CV->Bumpers Citroen->2 CV->Electrical and Ignition Citroen->2 CV->Emblems Citroen->2 CV->Engine Citroen->2 CV->Glass and Seals Citroen->2 CV->Transmission
PS360C. Pneumatic Tire Compactor. Cat 3054C Turbocharged Diesel Engine. Courtesy of Machine.Market
PS36C Pneumatic Tire Compactor Cat 354C Turbocharged Diesel Engine Gross Power 98 kw Maximum Operating Weight 25 kg Rolling Width 2.28 m 13 hp 55,115 lb 7' 6" Reliability and Versatility You Can Depend
SPARE PARTS LIST CHAIN SAWS
SPARE PARTS LIST CHAIN SAWS 61. 2017-08 ACCESSORIES 61. 2017-08 ACCESSORIES 61. 2017-08 Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL 1 2 503 62 12-01 GREASE 1 3 501 91 14-01 GREASE GUN 1
1 SPECFICATIONS TRUCK MOUNTED, HIGHWAY, LARGE DEBRIS REMOVER INDEX
1 INDEX I. GENERAL EQUIPMENT SPECIFICATIONS: A. Intent Statement B. Truck Mounted Road Debris Remover 1. General Specifications 2. Drum 3. Hitch Mounting Components 4. Paint 5. Safety II. Drawings III.
Series 240 Type Gas and Type Gas Automatic Shut-off Valves for Gases (valve class D)
Series 240 Type 3241-1-Gas and Type 3241-7-Gas Automatic Shut-off Valves for Gases (valve class D) DIN-DVGW typetested acc. to DIN EN 161 (2013-04) Application Control valve for control systems subject
Swifty - CNC Plasma 1250 x 1250mm Cutting Table and Hypertherm Powermax 45XP plasma to cut up to 12mm.
SWIFTY 1250 XP - Compact CNC Plasma Cutting Table Water Tray System, Hypertherm Powermax 45XP Cuts up to 12mm Ex GST Inc GST $20,500.00 $22,550.00 ORDER CODE: P9005 MODEL: SWIFTY 1250 XP Cutting Table
AVP : Pneumatic valve actuators
71.247 Product data sheet AVP 242...244: Pneumatic valve actuators How energy efficiency is improved Precise valve activation with only the slightest air requirement Features Activation of 2-way and 3-way
FuelEquipment.com FUELLING
Service - Lube - Fuel Trucks Fuelling design & build custom service vehicles built to accomplish requirements of your particular business. These vehicles can include new oils, collect, store & discharge
FACADES AND INTERIOR WALLS. Equipment for large construction sites and new-build FACADES AND INTERIOR WALLS - LARGE CONSTRUCTION SITES
FACADES AND INTERIOR WALLS - LARGE CONSTRUCTION SITES FACADES AND INTERIOR WALLS Equipment for large construction sites and new-build Facade design and interior wall coating with emulsion and latex paints
Queen. Giuliano Industrial S.p.A.
Super-Automatic no contact robotic tire changer Super automatic no contact (without use of bead lifting lever) robotic tire changer suitable for fitting/removing all kinds of passenger car and LCV tires
Spare parts list ( ) K 3.000
Spare parts list (1.601-990.0) K 3.000 01.11.2017 www.kaercher.com EN Table of contents K 3.000 (1.601-990.0) 201 Spare parts list K3.000 (follow me) 10 G 180 Q Trigger gun Quick Connect (2.642-889.0)
Exhaust hose reels. AQC source capture equipment. Sept 11, 2008 version. Leaflet under construction. More information to come at a later date.
AQC source capture equipment Exhaust hose reels Sept 11, 2008 version. Leaflet under construction. More information to come at a later date. Car and truck dealerships RV, off-road maintenance shops Motorcycle
Exhaust Nozzles. High temperature resistant rubber and metal exhaust hoses
High temperature resistant rubber and metal exhaust hoses Nederman offer an extensive range of robust rubber and metal vehicle exhaust extraction nozzles to accommodate various types of vehicles and systems
Airflex Rotorseal Description
Airflex Rotorseal The Airflex rotorseal is a rotary union (rotary joint) which permits the transfer of gases or liquids, under pressure or vacuum, into or out of the exposed end of a rotating shaft or
SPECIAL SERIES. New 30 kw high-pressure water jetting units
SPECIAL SERIES New 30 kw high-pressure water jetting units Easy Power XL : the best answer More power for fast and effective to all your requirements Powered by operations GENERAL FEATURES Sturdy painted
INTERNAL TRANSPORT UFlex KD Transport Cart... Sterisystem Stericart... Tambour Transport and Storage Carts...
www.belintra.com/us INTERNAL TRANSPORT UFlex KD Transport Cart... Sterisystem Stericart... Tambour Transport and Storage Carts... 3 5 7 This lightweight but sturdy transport cart made of anodized aluminum
S 226. Giuliano Industrial S.p.A.
Automatic Tilt Back Tire Changing Machine Automatic tilt back tire changing machine for wheels with rim from 10" to 24" (max. wheel diameter 1100 mm./43", max. wheel width 390mm./15"). Suggested for garages
Removing/installing final drive
1(16) Removing/installing final drive Special tools: 998 5972, 999 5561, 999 5652, 999 5659, 999 5660 Removing Note! Position the rear lifting arms on the arrows on the sills. This is so the support arm
Analog Low Volume Air Samplers
F&J SPECIALTY PRODUCTS, INC. The Nucleus of Quality Air Monitoring Programs Analog Low Volume Air Samplers 100 120 VAC LV-1 LV-14M LV-1D FJ-28BMHT FJ28B SRS-14MHT LV-22 SRS-14MHT Rev: 14 June 2018 Tel:
DESUPERHEATER (SERIES 800)
INTRODUCTION DESUPERHEATER (SERIES 800) The evolutionary series 800 Desuperheater i.e. Varitrol variable spray nozzles unit can be used in many applications to efficiently reduce the superheated steam
Installation instructions
Installation instructions Akrapovič Exhaust System: Link Pipe Set for the Porsche 911 Carrera (type 991.2) ENGLISH Version 1.0 09/2017 Installation instructions Akrapovič Exhaust System: Link Pipe Set
4 submersible pumps with integrated electronics powered by renewable energy sources ENGLISH
submersible pumps with integrated electronics powered by renewable energy sources ENGLISH HS technology applied to renewable energy HS MultiPower pumps (HS MP), powered by renewable energy sources, is
S 116. Giuliano Industrial S.p.A.
Semi-automatic swing arm tyre changer Semi-automatic swing arm tyre changer for wheels with rim from 10" to 24" (max. tyre diameter 1100 mm./43", max. tyre width 330mm./13"). Suggested for low-mid volume
UNIDIRECTIONAL Round Guillotine Damper
28/02/2012 UNIDIRECTIONAL Round Guillotine Damper Gas valve, with round damper design. Unidirectional guillotine damper. Various seat and packing materials available. Face to face distance in accordance
Power Valves Italia operates in the petrochemical, paper, chemical, naval, food, air and water treatment sectors.
Thanks to its twenty years of experience in the field of industrial plant engineering, Power Valves Italia is able to offer a wide range of valves and accessories, through a customized and accurate design
OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14 rev.
OPERATION MANUAL NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 1/14 rev. 3 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to
USER INSTRUCTIONS. Installation Operation Maintenance. Valtek Torex TX Control and shut-off valves. Butterfly Valves. Experience In Motion
USER INSTRUCTIONS Valtek Torex TX Control and shut-off valves Butterfly Valves VLEEIM4143-02 09.10 Installation Operation Maintenance Experience In Motion Contents SAFETY General 1 Lifting 2 Receiving
Pneumatic tools and accessories. For trades and businesses.
Competence from passion. Pneumatic tools and accessories. For trades and businesses. Pneumatic tools Lightweight, stable construction and proven durability: effective tools for maximum productivity. Impact
PA Series Diaphragm Type Pneumatic Actuator
Operating & Maintenance Manual Please keep it safely for future reference. 1) Introduction PA-190, PA-260, PA-260x2 and PA-350x2 series, a type of unilateral single-acting pneumatic actuators manufactured
Table of contents Copyright ANDREAS STIHL AG & Co. KG 2017 (3)
03-2016 USA Table of contents FS 94, FS 94 C, FS 94 R, FS 94 RC 4 Crankcase, Cylinder 6 Rewind starter 8 Rewind starter ErgoStart/Easy2Start 10 Muffler, Shroud, Ignition system 12 Fuel tank 14 Air filter,
Installation instructions
Installation instructions Akrapovič Exhaust System: Rear Carbon Fiber Diffuser for the Porsche 911 Carrera (type 991.2) ENGLISH Version 1.0 03/2017 Installation instructions Akrapovič Exhaust System:
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series)
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series) DESCRIPTION The PV403 control valves are three-way valves for mixing or diverting service. The
Butterfly Valve - Series 200
utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple