ELECTRONIC CONCEALED FLUSH VALVE FOR URINALS (MAIN SUPPLY)

Transcription

1 ELECTROIC COCEALED FLUSH VALVE FOR URIALS (MAI SUPPL) Head Office VitrA Bathroom Group Eczacýbaþý apý Gereçleri San. ve Tic. A.Þ. Kanyon Ofis Kat: Büyükdere Cad. o: , Levent, Ýstanbul / TURKE Tel: Fax: MATT CHROME CHROME PAEL SATI CHROME PAEL

2 SSTEM SPECIFICATIOS USE User free operation in public places. Hygiene. Ability fort he handicapped people. FEATURES System Works with optical sensation (infrared beams) principle. The main parts are the body, battery cover, solenoid valve group and panel mounted electronic module. System operates with 230 Volts main supply. Solenoid operates with 6 Volts. Flow pressure of the system should be between 0,5 5,5 bars. Cable connections are splash proof. Transparent (polycarbonate) surface of the infrared module is durable against strokes. It is also protected against damages during use by its small surface area. Panels are made from stainless steel. (Durable, long-lasted, aesthetic) Competeble with back inlet urinals (except the plastics water distributors) Working range can be adjusted 40 to 80 cm There is 5 seconds dedection delay to fitler the actions except for usage in front of the urinal. Delay for flush after use 1 sec. Flush volume can be adjusted from 1 5 lt. Working range and flush time adjustment switches. **Operating temperature between 5 C and 45 C** WARIG Do not use abrassive powder and asidic cleaning agents. Clean with a moist clothing. DO OT WASH THE PAEL WITH HOSEPIPE SPRA. 1 14

3 OTES: ASSEMBL If lid is used for urinal system should be installed higher than the lid s standing position. Use filter before the systems. Assembling should be made by an authorized plumber. 13 2

4 OTES: Kod Grup / Parça Adý Urinal Connection Pipe with Seal Solenoid Plug Frame Straphore Panel Body Kod Grup / Parça Adý Photocell Module Transformer Body Box Male / Female Plug Solenoid 3 12

5 WARRAT CODITIOS The period of warranty begins with the delivery date, and extends over 2 years. The date illustrated on the invoice corresponds to the delivery date. The product and its components are under warranty of VitrA. If the product fails within the warranty period, VitrA offers a free replacement product (or nearest equivalent) or replacement part. The products shall be inspected upon receipt. VitrA should be informed immediately due to any detectable defect. VitrA is entitled to inspect any damage at any time, together with third parties for the purpose of determining damage and any possible cause. If the inspection is refused by the purchaser/end user, any liability for defects will be extinguished V CASES EXCLUDED FROM THE WARRAT The following subjects are excluded from warranty. Defects of use of the auxiliary equipment, provided with the product or recommended for the assembly, Defects due to the use non conformity with the regulations indicated on the Technical Catalogue or the Installation and User Guide, Defects due to the faults of assembly, maintenance, repair, or disassembling by unauthorized person, Damage which can occur in transport, after the delivery of the product to the use (customer), Surface damage or other damage due to the prolonged storage of the product after the delivery of the product to the user (customer), Damage caused on the surface of the products wiped bye the heavy cleaning tools (wire, sponges, etc.), Do not clean the products with the detergents with powders abrasive or acid (bleacher, detergent containing ammonia, hydrochloric acid, etc.). In the event of contact with the product, it is necessary to wash immediately with water. The products must be protected from the shocks at the time of transport and use. ever make cuts, punctures, deposits of painting on the products. Clean the pipeline before usage, the dirt in the system might black. ever leave wet linens, wet cottons or materials of cleaning (bucket, bowls, etc.) on the woodworks. Avoid the impact of the solid and pointed objects on surfaces. In case of contact with water, it is imperatively necessary to dry wood surfaces to avoid the spots

6 5 6 MAITACE CHART Failure: System does not flush. Does red light flush after 2 sec. Unless user come in range? Does red light flash after 1 sec. If a user come in range? Does red light flush after 1 sec., if a user come out of range? Is stop valve open? Is the filter of solenoid? Change the solenoid valve. Check the transformer. Check the connection. Change the electronic module. Increase the range. Is the range set up adequate? Power on the power plug? Change transformer. Check the connection. 7 8 Failure: System does not flush adequately. Is the stop valve completely open? Is the required amount of water available from the pipe net? Is the flush time set up adequate? Turn on. System must be corrected. Set up it. max.60 mm Is the filter of solenoid valve clean? Are the washer and the connection pipe assembly correct? Clean it. Assembly must be corrected. ote: = es, = o 5 10

7 COTROL Before you open the panel, please be sure, if your main power turn off against risk of electric shock DRAWIG 1 WITHOUT PRE WASH DRAWIG 2 WITH PRE WASH 9 6

8 a 7 8