Cylindrical photoelectric sensors in M18 plastic or brass housings. Performance and portfolio variety. Metal *1 90 Optics AC power supply *2
|
|
- Buck Gordon
- 5 years ago
- Views:
Transcription
1 Cylindrical photoelectric sensors in M8 plastic or brass housings Complete sensor portfolio in plastic and metal housing IP67, IP69K for highest water resistance High immunity against electro-magnetic noise and ambient light Special beam models High power LED to compensate for dirt and misalignment Performance and portfolio variety Sensing method Shape Plastic Metal * 9 Optics AC power supply *2 Through-beam 7 m 7 m - m Retro-reflective m m 2 m m Diffuse-reflective Diffuse-reflective (background suppression) m m. m. m. m. m * SUS types see seperate datasheet *2 AC-types see seperate datasheet L-on / D-on selectable by wiring M2 connector or pre-wired.
2 Selection Guide Housing Material: Plastic Sensing method Sensing distance Connection method * Order code PNP output NPN output Through-beam 7 m 2 m -7B 2M -7C 2M -7B-P -7C-P Retro-reflective with M.S.R. *2. to m 2 m -RB-E 2M -RC-E 2M (adjustable) * -RB-P-E -RC-P-E Retro-reflective with M.S.R. *2. to 2 m * -R2RB-E 2M -R2RC-E 2M 2 m -R2RB-P-E -R2RC-P-E Diffuse-reflective Diffuse-reflective. m (fixed, wide-beam). m (adjustable) m (adjustable). m (adjustable) 2 m -DSB-N 2M -DSC-N 2M -DSB-P -DSC-P 2 m -DSB 2M -DSC 2M -DSB-P -DSC-P 2 m -DB 2M -DC 2M -DB-P -DC-P -DSB 2M -DSC 2M 2 m -DSB-P -DSC-P Diffuse reflective (background suppression). m (fixed) 2 m -LSB 2M -LSB-P -LSC 2M -LSC-P *. Pre-wired connectors are available on request. Please contact your OMR representative. *2. Order reflector seperately. Models with reflector included are also available. Please contact your OMR representative. *. Measured with reflector E9-RS *. Measured with reflector E9-R Note: Standard cable length is 2 m. Models provided with a m long cable are available. When ordering, specify the cable length by adapting the length of the cable (e.g. -RB-E M). For other cable length please contact your OMR sales representative. Housing material: Metal (Nickel plated brass) Sensing method Sensing distance Connection method * Order code PNP output NPN output Through-beam 7 m 2 m -7B-M 2M -7C-M 2M Retro-reflective with M.S.R. *2-7B-M-M -7C-M-M. to m (adjustable) * 2 m -RB-M-E 2M -RC-M-E 2M -RB-M-M-E -RC-M-M-E Retro-reflective with M.S.R. *2. to 2 m * 2 m -R2RB-M-E 2M -R2RC-M-E 2M -R2RB-M-M-E -R2RC-M-M-E Diffuse-reflective Diffuse-reflective. m (fixed, wide-beam). m (adjustable) m (adjustable). m (adjustable) 2 m -DSB-M 2M -DSC-M 2M -DSB-M-M -DSC-M-M 2 m -DSB-M 2M -DSC-M 2M -DSB-M-M -DSC-M-M 2 m -DB-M 2M -DC-M 2M -DB-M-M -DC-M-M -DSB-M 2M -DSC-M 2M 2 m -DSB-M-M -DSC-M-M 2 Standard Photoelectric Sensors
3 Sensing method Sensing distance Connection method * Order code PNP output NPN output Diffuse-reflective (background suppression). m (fixed) 2 m -LSB-M 2M -LSB-M-M -LSC-M 2M -LSC-M-M *. Pre-wired connectors are available on request. Please contact your OMR representative. *2. Order reflector separately. Models with reflector E9-RS included are available. Please contact your OMR representative. *. with reflector E9-RS *. with reflector E9-R Note: Standard cable length is 2 m. Models provided with a m long cable are available. When ordering, specify the cable length by adapting the length of the cable (e.g. -RB-E M). For other cable length please contact your OMR sales representative. Accessories (Order Separately) Name Sensing distance (typical) * Remark Order code Reflectors m [ mm] (axial types) 6 x mm E9-R 2 m [ mm] (radial types) m [ mm] (axial types) 6 x mm E9-RS 2 m [ mm] (radial types) m [ mm] (axial types) E9-R7 8 mm 2. m [ mm] (radial types) 6 m [ mm] (axial types) x mm E9-R8 m [ mm] (radial types) m [ mm] (axial types) 8 x 8 mm E9-R 2. m [ mm] (radial types) Tape Reflectors.7 m [ mm] (axial types) x mm E9-RS. m [ mm] (axial types) x mm E9-RS2. m [ mm] (axial types) 8 x 7 mm E9-RS Lens Cap E9-F Mounting Bracket screw mount Y92E-B8 *. Values in parentheses indicate the minimum required distance between the sensor and reflector. For detailed information about Accessories, refer to the main chapter Accessories at the end of the document. Sensor I/O Connectors Cord Shape Cable type Order code Standard Straight 2 m Four-wire type XS2F-D2-D8-A m XS2F-D2-G8-A L-shaped 2 m XS2F-D22-D8-A m XS2F-D22-G8-A Vibration-proof Straight 2 m XS2F-D2-D8-R robot cable m XS2F-D2-G8-R L-shaped 2 m XS2F-D22-D8-R m XS2F-D22-G8-R
4 Specifications Ratings Item Sensing method Through-beam Retro-reflective Diffuse-reflective with M.S.R. Wide beam Potentiometer adjustment Background suppression Power supply voltage to VDC Current consumption ma max. ma max. 2 ma max. ma max. Sensing distance 7 m. to m (with E9-RS) Standard object Opaque: mm dia. min. Opaque: 6 mm dia. min.. m ( x cm white mat paper). m ( x cm white mat paper) m ( x cm white mat paper). m ( x cm white mat paper) Directional angle to 2 Differential travel 2% max. % max (hysteresis) Black/white error % Response time Operation and Reset: 2. ms max. ms max 2. ms max. ms max. Control output Transistor (open collector), load current: ma max. (residual voltage: 2 V max.) Power reset time ms ms max. ms ms Ambient illumination Incandescent lamp: lx max. / Sunlight: lx max. Ambient temperature Operating: -2 to C / Storage: - to 7 C (with no icing or condensation) Ambient humidity Operating: % to 8% / Storage: % to 9% (with no condensation) Insulation resistance 2 MΩ min. at V DC between energized parts and case Dielectric strength VAC max., / 6 Hz for min between energized parts and case Vibration resistance to Hz,. mm double amplitude for 2 hrs each direction (X, Y, Z) Shock resistance Destruction: m/s 2 each direction (X, Y, Z) Degree of protection * IEC 629 IP67, IP69K after DIN -9 Light source (wave length) Infrared LED (9 nm) Indicators Light incident / power for light source (red) Red LED (66 nm) Light incident (red) / stability (green) Infrared LED (88 nm) Light incident / power for light source (red) Light incident (red) / stability (green) Red LED (66 nm) Sensitivity adjustment Fixed Adjustable Fixed Adjustable Fixed Connection method 2 m, m pre-wired cable (PVC, dia. mm (8 /.2) *2 ) or M2-connector Operation mode Weight (approx.) Plastic case Metal case Light- or Dark- selectable by wiring pre-wired 2 g 6 g (2 m) connector g 2 g pre-wired 8 g 9 g (2 m) connector 2 g g short- and power supply reverse polarity Circuit protection Housing materials * Case: ABS (plastic models) or nickel brass (metal models); lens: PMMA (orange) / stability (green) *. The IP69k test according to DIN part 9 is intended to simulate high pressure/steam cleaning. During the test -6 l/min water at 8 C is sprayed onto the sensor from different angles with 8- kpa. The sensor may not suffer any damaging effects from high pressure water in appearance and functionality. *2. For other cable materials (e.g. PUR) contact your OMR sales representative. *. For stainless steel types refer to separate datasheet SUS Standard Photoelectric Sensors
5 Engineering Data (Typical) Operating Range (typical) Through-beam Models (axial) Retro-reflective Models (axial) (polarizing) Retro-reflective Models (radial) (polarizing) and reflectors 2 2 Typical sensing distance E9-RS E9-RS E9-R E9-R7 E9-R8 typical sensing distances: E9-R: 2. m E9-R7: 2.7 m E9-R8:. m Distance Y (mm) Y Reflector Distance X (m) X Distance Y (mm) Y Reflector X. Distance X (m) Diffuse-reflective Models (axial) -DS@-@ (wide-beam type) Diffuse-reflective Models (axial) -DS@-@ Diffuse-reflective Models (radial) -DS@-@ Sensitivity adjusted to maximum Sensitivity adjusted to mm Sensitivity adjusted to 9 mm White paper (9% reflectivity) 2 2 Distance Y (mm) white paper ( x mm) Distance Y (mm) white paper ( x mm) Distance Y (mm) Sensing object: x mm Y Object 2 Sensing distance adjustable between and mm Y Object 2 Y Object X Distance X (mm) X 2 6 Distance X (mm) X 2 Distance X (mm) Diffuse-reflective Models (axial) -D@-@ 8 6 Distance Y (mm) Sensing object: x mm -6-8 Y Object X Distance X (mm)
6 Excess Gain Ratio vs. Distance (typical) Through-beam Models (axial) Retro-reflective Models (axial) Retro-reflective Models (radial) (polarizing) and reflectors Excess gain Excess Gain Reflectors: E9-RS E9-RS E9-R E9-R7 E9-R8 Excess gain reflector E9-R reflector E9-R7 reflector E9-R Distance X (m) Distance X (m). 2 Distance X (m) Diffuse-reflective Models (axial) -DS@-@ (wide-beam type) Sensing object: x mm Diffuse-eflective Models (axial) -DS@-@ Sensitivity adjusted to maximum Sensing object: x mm Diffuse-reflective Models (radial) -DS@-@ Sensing object: x mm Sensitivity adjusted to 9 mm Excess gain Grey paper (8% reflectivity) White paper (9% reflectivity) Excess gain White paper (9% reflectivity) Excess gain White paper (9% reflectivity) Grey paper (8% reflectivity) Grey paper (8% reflectivity) Distance X (mm) Distance X (mm). 2 Distance X (mm) Diffuse-reflective Models (axial) -D@-@ Excess gain,.. 2 Distance(m) 6 Standard Photoelectric Sensors
7 Light spot vs sensing distance Incline (horizontal) Incline (vertical) Background suppression Models 6 Background suppression Models 2,% Background suppression Models 2,% Spot diameter(mm) 2 Sensing Distence movement (%),%,% -,% Sensing Distence movement (%),%,% -,% Distance(mm) -2,% Incline Angle ( ) -2,% Incline Angle ( ) Object material vs sensing distance Background suppression Models -LS@ Sensing distance (mm) White Veneer Cardboard Black paper paper Black SUS rubber Mirror surface Material 7
8 Operation Circuits 2 XS2F-D2#-D8-# XS2F-G2#-G8-# White Blue Black Structure of Sensor I/O Connector Classification Wire color Connector Use pin No. DC ➀ Power supply (+V) White ➁ Mode selection Lon/Don Blue ➂ Power supply ( V) Black ➃ PNP Model -@B-@ (except for -LSB-@) transistor status Timing chart Connection method Through-beam emitter Power (red) to VDC Main Blue V 2 when light is incident. (Light-) Incident Interrupted (red) transistor (relay) Operate Release Connect the pink (Pin ➁) and brown (Pin ➀) cords or open the pink cord (Pin ➁). Light Red Stability to VDC * Green ZD Black Main ZD: VZ = 6 V ma Blue max. V Pink 2 Mode selection * Only on models -RB-@ and -DB-@ 2 when light is interrupted. (Dark-) Incident Interrupted (red) transistor (relay) Operate Release Connect the pink (Pin ➁) and blue (Pin ➂) cords. Light Red Stability to VDC * Green Black Main Z D: VZ = 6 V ma Blue max. V Pink 2 Mode selection * Only on models -RB-@ and -DB-@ 2 -LSB-@ when light is incident. (Light-) Incident Interrupted (orange) transistor (relay) Operate Release Connect the pink (Pin ➁) and brown (Pin ➀) cords or open the pink cord (Pin ➁). Orange Stability to VDC * Green Z D Black Main ZD: VZ = 6 V ma Blue max. V Pink 2 Mode selection 2 when light is interrupted. (Dark-) Incident Interrupted (orange) transistor (relay) Operate Release Connect the pink (Pin ➁) and blue (Pin ➂) cords. Orange Stability to VDC * Green Black Main Z D: VZ = 6 V ma Blue max. V Pink 2 Mode selection 2 Note: Terminal numbers for connector type. 8 Standard Photoelectric Sensors
9 NPN Model transistor status Timing chart Connection method (except for Through-beam emitter Power (red) to VDC Main Blue V 2 when light is incident. (Light-) Incident Interrupted (red) transistor (relay) Operate Release Connect the pink (Pin ➁) and brown (Pin ➀) cords or open the pink cord (Pin ➁). Red Stability to VDC * Green ma Black max. Main Blue V Z D: VZ = 6 V Pink 2 Mode selection * Only on models -RC-@ and -DC-@ 2 when light is interrupted. (Dark-) Incident Interrupted (red) transistor (relay) Operate Release Connect the pink (Pin ➁) and blue (Pin ➂) cords. Red Stability to VDC * Green ma Black max. Main Blue V Z D: VZ = 6 V Pink 2 Mode selection * Only on models -RC-@ and -DC-@ 2 -LSC-@ when light is incident. (Light-) Incident Interrupted (red) transistor (relay) Operate Release Connect the pink (Pin ➁) and brown (Pin ➀) cords or open the pink cord (Pin ➁). Orange Stability to VDC * Green ma Black max. Main Blue V Z D: VZ = 6 V Pink 2 Mode selection 2 when light is interrupted. (Dark-) Incident Interrupted (orange) transistor Connect the pink (Pin ➁) and blue (Pin ➂) cords. Orange Stability * Green Main Black Blue Z D: VZ = 6 V to VDC ma max. V Pink (relay) Operate Release 2 Mode selection 2 Note: Terminal numbers for connector type. 9
10 Dimensions Note: All units are in millimeters unless otherwise indicated Plastic models, axial type Cable type Without potentiometer Connector type dia dia 6. dia dia M2x 6g 6.6 dia Light M8x 6g 8 Light M8x 6g With potentiometer -DS@ -D@ -R@ -DS@-P -D@-P -R@-P dia dia 6. dia dia M2x 6g 6.6 dia Sensitivity adjustor Light M8x 6g Sensitivity adjustor Light 8 M8x 6g Standard Photoelectric Sensors
11 Plastic models, radial type Cable type Without potentiometer Connector type dia dia 6. dia dia M2x 6g 6.6 dia Light M8x 6g Light M8x 6g. With potentiometer -DS@ -DS@-P dia dia 6. dia dia M2x 6g 6.6 dia Sensitivity adjustor Light M8x 6g. 6.9 Sensitivity adjustor Light 8 M8x 6g.
12 Metal Models, axial type Cable type Without potentiometer Connector type dia.8 dia 6. dia M2x 6g.8 dia 6. dia Light M8x 6g Light M8x 6g With potentiometer -DS@-M -R@-M -D@-M -DS@-M-M -R@-M-M -D@-M-M dia dia 6. dia Sensitivity adjustor Light M8x 6g dia M2x 6g 6. dia Sensitivity adjustor Light M8x 6g 2 Standard Photoelectric Sensors
13 Metal Models, radial type Cable type Without potentiometer Connector type dia dia 6. dia Light M8x 6g dia M2x.6g 6. dia Light M8x.6g With potentiometer -DS@-M -DS@-M-M dia dia 6. dia dia M2x 6g 6. dia Sensitivity adjustor Light M8x 6g. 6.9 Sensitivity adjustor Light M8x 6g.
14 Accessories (Order Separately) Reflector E9-R E9-RS E9-R7 Two,. dia Material, reflective surface: acrylic Rear surface: ABS E9-R8 E9-R for M for M Tape relectors E9-RS E9-RS E9-RS2 x R Reflecting surface Adhesive tape.7 -R Adhesive tape side x R Reflecting surface Adhesive tape Installation Mounting Bracket Y92E-B8 Lens Cap E9-F Glass plate Metal rim Gasket Note: Hexagon bolt: M x 2 Material: plastic 2 dia. max. Standard Photoelectric Sensors
15 Safety precautions! Warning This product is not designed or rated for directly or indirectly ensuring safety of persons. Do not use it for such a purpose.! Caution Do not use the product with voltage in excess of the rated voltage. Excess voltage may result in malfunction or fire. Never use the product with an AC power supply. Otherwise, explostion may result. When cleaning the product, do not apply a high-pressure spray of water to one part of the product. Otherwise, parts may become damaged and the degree of protection may be degraded. High-temperature environments may result in burn injury. Precautions for Safe Use The following precautions must be observed to ensure safe operation of the Sensor. Operating Environment Do not use the Sensor in an environment where explosive or flammable gas is present. Connecting Connectors Be sure to hold the connector cover when inserting or removing the connector. Be sure to tighten the connector lock by hand; do not use pliers or other tools. If the tightening is insufficient, the degree of protection will not be maintained and the Sensor may become loose due to vibration. The appropriate tightening torque is.9 to.9 N m for M2 connectors. Do not use a load that exceeds the rated load. Rotation Torque for Sensitivity Adjustment Adjust with a torque of. N m or less. Environements with Cleaners and Disinfectants (e.g., Food Processing Lines) Do not use the Sensor in environments subject to cleaners and disifectants. They may reduce the degree of protection. Modifications Do not attempt to disassemble, repair, or modify the Sensor. Outdoor Use Do not use the Sensor in locations subject to direct sunlight. Cleaning Do not use thinner, alcohol, or other organic solvents. Otherwise, the properties and degree of protection may be degraded. Surface Temperature Burn injury may occur. The Sensor surface temperature rises depending on application conditions, such as the surrounding temperature and the power supply voltage. Use caution when operating or washing the Sensor. Precautions for Correct Use Do not use the Sensor in any atmosphere or environment that exceeds the ratings. Do not install the Sensor in the following locations. ()Locations subject to direct sunlight (2)Locations subject to condensation due to high humidity ()Locations subject to corrosive gas ()Locations where the Sensor may receive direct vibration or shock Connecting and Mounting ()The maximum power supply voltage is VDC. Before turning the power, make sure that the power supply voltage does not exceed the maximum voltage. (2)Laying Sensor wiring in the same conduit or duct as high-voltage wires or power lines may result in malfunction or damage due to induction. As a general rule, wire the Sensor in a separate conduit or use shielded cable. ()Use an extension cable with a minimum thickness of. mm 2 and less than m long. ()Do not pull on the cable with excessive force. ()Pounding the Photoelectric Sensor with a hammer or other tool during mounting will impair water resistance. (6)Mount the Sensor using a bracket (sold separately). Do not exceed a torque of 2. Nm when tightening mounting nuts for plastic models or 2. Nm when tightening mounting nuts for metal models (7)Be sure to turn the power supply before inserting or removing the connector. Cleaning Never use thinner or other solvents. Otherwise, the Sensor surface may be dissolved. Power Supply If a commercial switching regulator is used, ground the FG (frame ground) terminal. Power Supply Reset Time The Sensor will be able to detect objects ms after the power supply is tuned. Start using the Sensor ms or more after turning the power supply. If the load and the Sensor are connected to separate power supplies, be sure to turn the Sensor first. Turning the Power Supply pulses may be generated even when the power supply is. Therefore, it is recommended to first turn the power supply for the load or the load line. Short- Protection This Sensor is equipped with load short- protection, but be sure to not short the load. Be sure to not use an output current flow that exceeds the rated current. If a load short occurs, the output will turn, so check the wiring before turning the power supply again. The short- protection will be reset. Water Resistance Do not use the Sensor in water, rainfall, or outdoors.
16 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMR representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMR's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMR. OMR MAKES NO WARRANTY OR REPRESENTATI, EXPRESS OR IMPLIED, REGARDING N-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMR DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIS OF LIABILITY OMR SHALL NOT BE RESPSIBLE FOR SPECIAL, INDIRECT, OR CSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED CTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMR for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMR BE RESPSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMR'S ANALYSIS CFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CTAMINATI, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATI OR REPAIR. Application Considerations SUITABILITY FOR USE OMR shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMR will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATI INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMR PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMR shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMR representative at any time to confirm actual specifications of purchased products. DIMENSIS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMR s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMR Warranty and Limitations of Liability. ERRORS AND OMISSIS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. OMR Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMR Corporation 29 All Right Reserved.
E2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.
More informationDigital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CC with Built-in Microcomputer and Digital Display Withstands a pressure of 49 kpa and highly reliable. Incorporates a two-turn pressure adjuster ensuring easy pressure setting.
More informationE3ZM-C. Photoelectric Sensor for the Automotive and Machine Tool Industries. Features
Authorised Distributors:Intech Systems Chennai Pvt. Ltd, Chennai-6 Ph: +9 8888 Fax: 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Oil-resistant, Robust, Compact Photoelectric Sensor
More informationG3PE-Single-phase. Solid State Relays for Heaters
Solid State Relays for Heaters Single-phase CSM_Single-phase_DS_E Compact, Slim-profile SSRs with Heat Sinks. s with No Zero Cross for a Wide Range of Applications. RoHS compliant. s also available with
More informationA165S/W. Separate Construction with Cylindrical 16-dia. Body. Knob-type Selector Switch (Detachable) (Cylindrical 16-dia.
Knob-type Selector Switch (Detachable) (Cylindrical 16-dia.) CSM_A165S_W_DS_E_4_1 Separate Construction with Cylindrical 16-dia. Body Same separate construction as the A16-series Pushbuttons with Miniature
More information2NC (slow-action) Direct. Model. opening
Small Safety Limit Switch CSM DS_E_3_1 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The world's
More informationM2S. Indicator Series with Square 40-mm Body. Indicator (Square) List of Models
Indicator (Square) CSM DS_E_3_2 Indicator Series with Square 40-mm Body Same type of Indicator as those in the A3S-series Pushbutton Switch Easy panel mounting from the front and simple lamp replacement
More informationMultiple Limit Switch
Multiple Limit Switch CSM DS_E_1_1 A New Monoblock Multiple Limit Switch Incorporating a ead Box with a Tough ead and Ensuring igh Sealing Performance and a Mechanical Durability of 5,000,000 Operations
More informationOperation Key D4BS - K Head Mounting Direction F: Four mounting directions possible (front-side mounting at shipping)
Safety-door Switch D4BS The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment CSM_D4BS_DS_E_6_1
More information0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)
Mechatronic Analog Timer H3AM Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and
More informationE2Q6. Rectangular Proximity Sensor. Freely Change the Sensing Direction. Ordering Information. Sensors [Refer to Dimensions on page 6] DC Models
Rectangular Freely Change the Sensing Direction Change between any of five sensing directions: front or 9 up, down, left, or right. Four indicators show the operating status of the from many directions.
More informationModel Number Structure
Solid State Relays CSM OEE_DS_E_1_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting
More informationA165E CSM_A165E_DS_E_11_2
Emergency Stop Switch (16-dia.) CSM DS_E_11_2 Separate Construction with Minimal Depth Direct opening mechanism to open contacts in emergencies, such as when they are welded. Conforms to EN 6947-5-5. Includes
More informationSense7-series Non-contact coded safety switch
Original instructions Sense7-series Non-contact coded safety switch ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please
More informationD4BS CSM_D4BS_DS_E_8_4
Safety-door Switch CSM DS_E_8_4 The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment
More informationSmile 11 RA/-B Smile 12 RF/-G Reset button
Original Instructions Smile 11 RA/-B Smile 12 RF/-G Reset button ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this User Manual Please read
More informationRatings 1 A at 125 VAC 1 A at 30 VDC LED indicator Without indicator With indicator Without indicator With indicator Actuator
Miniature Limit Switch CSM DS_E_3_3 Many Models Including Roller Lever Switches are Only -mm Thick with Connector New center roller lever models that enable ganged mounting of up to 6 Switches. Cable connectors
More informationD4GS-N CSM_D4GS-N_DS_E_7_2
Slim Safety Door Switch D4GS-N CSM_D4GS-N_DS_E_7_2 Slim Safety Door Switches with IP67 Rating Slim design with a width of only 17 mm (three-contact models). Reversible design allowing either front or rear
More informationOrdering Information. Specifications. Motor Time Switch H2F-WM. Accessories (Order Separately) Time Specifications. Ratings
Motor Time Switch H2F-WM CSM_H2F-WM_DS_E_2_1 Weekly ON/OFF Control in 1-h Increments The H2F-WM is a Compact Weekly Time Switch in a DIN -mm Body Equipped with Power Interruption Backup Providing Protection
More informationTina 11A Connection block
Original instructions Tina 11A Connection block ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
More informationInput terminals Isolation method Zero cross function Operation indicator Alarm output Applicable load (See note.) Model
Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer
More informationTina 10A/B/C Adaptor unit
Original instructions Tina 10A/B/C Adaptor unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
More informationFeatures. Emergency Stop Switch A165E. Separate Construction with Smallest Class of Depth in the World. Safety Lock Prevents Misuse
Emergency Stop Switch Separate Construction with Smallest Class of Depth in the World Direct opening mechanism to open contacts in emergencies, such as when they are welded. Conforms to EN418. Includes
More informationDescription General-purpose models Timer-function models Output NPN PNP NPN PNP Part number E3X-NH11 E3X-NH41 E3X-NH21 E3X-NH51 Appearance
R High-Precision Fiber-optic Amplifier TheEmploysa16-Bit Processor as An Industry First H An Automatic Sensitivity Adjustment feature allows stable detection of objects in frequently changing environments
More informationTina 4A Connection block
Original instructions Tina 4A Connection block Instructions valid for versions of the product from ver. H ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read
More informationCylindrical Sensors CY-100 SERIES panasonic-electric-works.net/sunx. Cylindrical Inductive Proximity Sensor GX-M SERIES.
Cylindrical Sensors Photoelectric Sensor CY-100 SERIES Inductive Proximity Sensor GX-M SERIES Listing (2 m cable length type only) Cylindrical Inductive Proximity Sensor GX-M SERIES Cylindrical Photoelectric
More informationFMC-1/2 Tina Muting unit
Original instructions FMC-1/2 Tina Muting unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
More informationEStrong-series Emergency Stop
Original instructions EStrong-series Emergency Stop ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand
More informationD4NS. Safety-door Switch. Multi-contact, Labor-saving, Environment-friendly, Next-generation Safety-door Switch. Model Number Structure
Safety-door Switch D4NS CSM_D4NS_DS_E_5_2 Multi-contact, Labor-saving, Environment-friendly, Next-generation Safety-door Switch Lineup includes three contact models with 2NC/1NO and 3NC contact forms and
More informationInductive Proximity Sensor
Inductive Proximity Sensor General-purpose Type in a Basic Switch Housing Mounting pitch compatible with that of mechanical basic switch. Wide operating voltage range: 10 to 30 VDC or 90 to 250 VAC. LED
More informationModel Number Legend (Completely Assembled)... Shipped as a set which includes the Operation Unit, Lamp (lighted models only), and Switch. 4.
Emergency Stop Switch (-dia./5-dia.) AE CSM_AE_DS_E_7_ Install in -dia. or 5-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating
More information(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet
Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_4_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth
More information2NC (slow-action) Direct. Model. opening
Small Safety Limit Switch D4F CSM_D4F_DS_E_5_2 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The
More informationApplicable output load (See note 2.) Photocoupler Yes Yes 40 A at 110 to 220 VAC 5 to 24 VDC G3NB-240B 5 to 24 VDC G3NB-240B-UTU 5 to 24 VDC
Solid State Relays G3NB with 40-A output at a reasonable price. Switches 9 A without a heat sink. Zero cross function enables less noise operation. Built-in varistor effectively absorbs external surges.
More informationTL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information
Flat Inductive Standard Flat s in Many Different Variations Only 6 mm thick yet provides a sensing distance of mm (MC1). Aluminum die-cast models also available. Be sure to read Safety Precautions on page
More informationSmile 41 Push-button box with/without emergency stop
Original instructions Smile 41 Push-button box with/without emergency stop ABB Jokab Safety Varlabergsvägen 11, 434 39 Kungsbacka www.abb.com/jokabsafety Read and understand this document Please read and
More informationD4BL. Guard Lock Safety-door Switch
Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_5_1 Release Protective Cover Locks Using Controller Signals or Pushbutton Switches after the Cutting Tool Stops Moving Due to Inertia A mechanical lock
More information2 to 25 A, 100 to 240 VAC G3PF-225B-STB Compact slotted
Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer
More informationMKey9-series Safety Interlock Switch with Guard Locking
Original instructions MKey9-series Safety Interlock Switch with Guard Locking ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document
More informationInsulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit
SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,
More informationModel Pressure range ON/OFF output Linear output
Digital Sensor Sensor with Easy-to-Read LED Display status can be checked at a glance from the red digital pressure value and analog bar displays. Measurement pressure is averaged by the chattering prevention
More information2.5 mm. (0.10 in) E2S -Q25 E2S -Q26. Output configuration. 2.5 mm. End face E2S -W15 E2S -W16 End face PNP
Subminiature Rectangular Inductive Prox World s Smallest Square Sensor with Built-in Amplifier H. x. mm type allows smaller, space-saving machines and devices H High response frequency ( khz) for fast
More informationD4BL. Guard Lock Safety-door Switch
Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_7_1 Release Protective Cover Locks Using Controller Signals or Pushbutton Switches after the Cutting Tool Stops Moving Due to Inertia A mechanical lock
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_4_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationSA1W: Water Detection Sensors SA1W-FN1 SA1W-FN2 SA1W-FP1 SA1W-FP2
The SA1W is the fastest, most reliable liquid detection sensor on the market. Using a laser beam tuned to the resonant frequency of an H 2 O molecule, the SA1W is able to detect any liquid containing water
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor Ideal for Narrow Mounting Space Grooved TL-G3D is ideal for high-speed pulse generator and high-speed revolution control. TL-Q2 and TL-Q5 save mounting space
More informationSafety Guard Switching Unit G9SX-GS
Enabling Grip Switch CSM DS_E_5_1 Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions The difficult task of configuring safety circuits is now easily achieved by combining the
More informationE2EZ-X2D1-N E2EZ-X2D2-N
Chip-immune Inductive s Detects Objects without Being Influenced by Aluminum or Iron Chips Series now includes M s. s also available. CE Marking for DC -Wire and DC -Wire s. Be sure to read Safety Precautions
More information2.5mm. Output configuration NPN. 2.5mm PNP. 2.5mm
Compact Square Inductive Proximity Sensor World s Smallest Square Sensor with uilt -in Amplifier 5.5 x 5.5 mm type contributes to smaller, space-- saving machines and devices. Comprehensive range; sensing
More informationBetter Productivity by Standstill and Low-speed Monitoring
Better Productivity by Standstill and Low-speed Monitoring Standstill Monitoring Reduces Extra Waiting Time During Work Problem When a hazardous part has a long inertia, door-lock control using an off-delay
More informationA22LK CSM_A22LK_DS_E_6_2
Guard Lock Safety Key CSM DS_E_6_2 The guard lock prevents accidental mode changes. for secure equipment activation during maintenance The guard lock of the Operation Unit prevents incorrect operation.
More informationSA1W: Water Detection Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable
More informationXW2R-COM. Common Terminals X W 2R - P D - COM. Space-saving and less wiring work of power supply wiring are achieved. Application Example
Common Terminals XW2R-COM CSM_XW2R-P_M_B-COM_DS_E Space-saving and less wiring work of power supply wiring are achieved. Common wiring is already wired on the PCB, transition wiring is unnecessary. Wiring
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor E2E2 Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility. A milled
More informationS8JX-N/S8JX-G Series Replacement Brackets
Original model mounting method Bottom mounting Front mounting Side mounting Original model: S8JX-N/S8JX-G Replacement model: S8FS-G Replacement bracket Model scheduled to be discontinued Recommended replacement
More informationPRODUCT SPECIFICATION. Stack Lights. Series.
PRODUCT SPECIFICATION Stack Lights Series www.wernerelektrik.com Light Color Significance... Specifications... Functional Specification... Model Number Structure - Stack Lights... Model Number Selection...
More informationAdjustable Range Reflective Photoelectric Sensor Amplifier Built-in. panasonic.net/id/pidsx/global
3 Adjustable Range Reflective Photoelectric SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.549~ guide... P.3~ General precautions... P.55~ PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global
More informationA Metal Head That's. Highly Durable and Provides Long-distance Detection. mm 7(M18 Model) Proximity Sensor with All-stainless Housing E2EF NEW
NEW Proximity Sensor with All-stainless Housing EEF Standard Model (Completely stainless- housing) A Metal Head That's * Highly Durable and Provides Long-distance Detection mm 7(M18 Model) *More than 0
More informationDIN Track Terminal Blocks with Screw Terminals
New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal
More informationDIN Track Terminal Blocks with Screw Terminals XW5T
New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal
More informationIP69K: Highly water resistant
Stainless steel housing type Series IP69K: Highly water resistant Tough structure for food processing line needs washing with high temperature and high pressure water. Achieves long sensing distance. For
More informationDIN Track Terminal Blocks with Screw Terminals XW5T
New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes from 0.14 to 185
More informationMiniature Limit Switches
(Horizontal) Plastic od 49.17.1* oller Lever 49.1.01.03 Miniature Limit witches 49 ealed oller Plunger 49 eries Miniature Limit witches Model election...1 Model Number tructure... Technical Data...3 pecification...4
More informationLED Signal Towers. Pre-assembled and pre-cabled in different aperture to highlight the processes. Features/Unique selling proposition
Pre-assembled and pre-cabled in different aperture to highlight the processes LED Signal Towers Modular and monolithic design are available. Patlite s extensive product range cover highly advanced LED
More informationD4BL. Guard Lock Safety-door Switch. Die-cast aluminum body Key holding force of 700 N. Model Number Structure. Model Number Legend Switch D4BL - K
Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_10_1 Die-cast aluminum body Key holding force of 700 N Auxiliary release key ensures easy maintenance and unlocks the door in the case of a power failure.
More informationD4NH. Safety-door Hinge Switch. Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment
Safety-door Hinge Switch CSM DS_E_4_1 Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment Note: Contact your sales representative for details on models
More informationDimension A. Dimension B
Slim Connector-Terminal lock Conversion Units CSM DS_E_2_2 New Slim Connector-Terminal lock Conversion Units. Mounting area reduced by 35% (in comparison with 40-pole XW2 Units) to contribute to downsizing
More informationNot affected by drops, bubbles or froth
PARTICULAR USE SENSORS SERIES Sensor Detects water...reliably! Strong penetration power Not affected by drops, bubbles or froth Conforming to EMC Directive UL Recognition (Excluding m cable length type)
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.
More informationSolid State Relays G3NA. Model Number Structure. Model Number Legend
Solid State Relays G3NA The reliable choice for Hockey-puck-style Solid State Relays. Available in a Wide Range of Currents. All models feature the same compact dimensions to provide a uniform mounting
More informationG6K. Surface Mounting Relay with the World s Smallest Mounting Area. Application Examples. Model Number Legend. Ordering Information
with the World s Smallest Mounting Area Subminiature model as small as.2 (H). (W) (L) mm is ideal for high-density mounting ((U)-2F(-Y)). Low profile of.2 mm improves mounting efficiency ((U)-2F(-Y)).
More informationModel Pressure range ON/OFF output Linear output
Authorised Distributors:- ASH & ALAIN INDIA PV LD S-1, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-112(India) el : 11-43797575 Fax : 11-43797574 E-mail : sales@ashalain.com Digital Sensor Sensor
More informationSupply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p) 10% max. 100 to 220 VAC (90 to 250 VAC), 50/60 Hz
R Pancake Style Inductive Prox Long-Range Proximity Sensor Detects Metal Objects at 50 mm H Ideal for many industrial automation applications H Choose DC 3 -wire or AC 2 -wire models H Rugged die -cast
More informationDigital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be
More informationE bracket (see note 1) SPST-NO G7L-1A-TJ-CB G7L-1A-BJ-CB DPST-NO G7L-2A-T-CB G7L-2A-B-CB
General Purpose Relay G7L Ideally suited for high-inrush fluid pump controls: pool/spa, water processing, emergency, chemical industry, etc. High-capacity, high-withstand voltage relay with no contact
More information(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet
Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_6_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth
More informationsensors SA1C-F High-speed Fiber Optic: SA1C-F
High-speed Fiber Optic: Key features: Ideal for remote sensing applications Featuring quick-connect cable and easy-insert fiber optic units for simple installation Through-beam and reflected-light sensing
More informationBasic Switch Style Inductive Prox TL-M. Ordering Information. General-purpose Inductive Prox in a Basic Switch Housing
R Basic Switch Style Inductive Prox General-purpose Inductive Prox in a Basic Switch Housing H Mounting pitch compatible with that of a mechanical basic switch H Wide operating voltage range: 10 to 30
More informationTL-N7MD1 7mm(0.28 in) NC. 12 mm (0.47 in)
R Rectangular Inductive Prox Space-Saving Sensors for a Wide Range of Applications H Switches loads up to 200 ma H Easy to install DC 2-wire models reduce wiring H DC 3-wire models available with high-flexibility
More informationE2K-L. Liquid Level Sensor. Applications. Ordering Information
Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing
More informationCorrection Reissue. Product Discontinuation Notices. Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.
PRODUCT NEWS Correction Reissue Product Discontinuation Notices Proximity Sensors Issue Date August 4, 2014 No. 2014038CE(3) Discontinuation Notice of Cylindrical Proximity Sensor Model E2E series.
More informationCX-20. General Purpose Photoelectric Sensor with Full Basic Performance. SERIES Amplifier Built-in Compact Photoelectric Sensor PHOTOELECTRIC SENSORS
SERIES Amplifier Built-in Compact Photoelectric FX-D/A/M FX-A FX- Fiber s General Purpose Photoelectric with Full Basic Performance FZ- Compact Size Two s Mountable Together Waterproof Just mm in depth,
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationSmall-diameter Proximity Sensor
Small-diameter Proximity Sensor EE Ultra small size, but surprisingly easy installation! With the addition of M, 5.-dia.,.5-dia. size, unshielded, pre-wired connector model, and connector model, a total
More informationA22E. Emergency Stop Switch (22-dia./25-dia.) Install in 22-dia. or 25-dia. Panel Cutout. Model Number Structure L M 24A 01
Emergency Stop Switch (-dia./5-dia.) CSM DS_E_5_ Install in -dia. or 5-dia. Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating errors.
More informationD4NH CSM_D4NH_DS_E_7_1
Safety-door Hinge Switch D4NH CSM_D4NH_DS_E_7_1 Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment Lineup includes three contact models with 2NC/1NO
More informationHigh-power Solid State Relays G3PH
New Product News High-power Solid State Relays G3PH High-power, Load-control s with High Current of 75 or 150 A and High Voltage of 240 or 480 VAC RoHS compliant. Models also available with no zero cross.
More informationPlease note! This model of Eden is obsolete and has been replaced by Eden DYN. Original instructions Eden Non-contact safety sensor
Original instructions Eden Non-contact safety sensor ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand
More informationSensor connectors, reflectors, mounting brackets, accessories
Sensor connectors, reflectors, mounting brackets, accessories XS, Y92E, E39 The sensor accessory portfolio provides the products required to connect, mount or operate the main photoelectric and inductive
More informationA4EG CSM_A4EG_DS_E_6_1
Enabling Grip Switch CSM DS_E_6_1 Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions In addition to the standard models, the lineup also includes models with an emergency stop
More informationIndicators reveal the sort of an abnormal condition. Emitter Emitting Controller Power indicator
AREA SENSOR SERIES mm Beam Pitch NA1-5 NA2 SF1-F NA40 SF1-N SF1-A Slim Body Fail-safe esign For General Use Supreme Fail-safe esign The system always check there is no internal circuit, no cable breakage,
More informationIP69K: Highly water resistant
Stainless steel housing BGS type BGS-ZM Series IP9K: Highly water resistant Tough structure for food processing line needs washing with high temperature and high pressure water. turn sensitivity adjustment
More informationOrdering Information. Motor Time Switch H2F-D. Accessories (Order Separately) ON/OFF Control 48 Times per Day in 15-min Increments
Motor Time Switch H2F-D ON/OFF Control 48 Times per Day in 15-min Increments The H2F-D is a Low-cost Time Switch for Affordable Operation in a Compact DIN 72 x 72-mm Body. Choose the Ideal Model to Match
More informationOrdering Information. Application Example. New General-purpose Incremental-type. Rotary Encoder. Accessories (Order Separately)
Rotary Encoder New General-purpose Incremental-type Rotary Encoder A wide operating voltage range of 5 to 24 VDC (open collector model). Resolution of 2,000 pulses/revolution in 40-mm housing. can be adjusted
More informationSimple Pressure Level Setting. The threshold level is able to adjust simply. Just set the pointer suitable for the displayed pressure level.
SERIES LED Bar Display Mechanical Switch is Out of Date Choose the Contemporary Pressure Sensor with LED Bar Display Marked Conforming to EMC directive Bright LED Bar Display Easy to read the pressure
More informationProximity Sensor. Shield Size Sensing distance Output configuration Models Shielded M12 3 mm NO E2EQ-X3D1 E2EQ-X7D1 M30 10 mm E2EQ-X10D1
Proximity Sensor A Series of Spatter-preventing Proximity Sensors with a Teflon-coated Metal Housing Teflon*-coated metal housing endures high tightening torque. Pre-wired and plug-in models are available.
More informationE2E/E2EQ NEXT Series. Proximity Sensor. Long-distance Detection Prevents Unexpected Facility Stoppages. E2E/E2EQ NEXT Series Model Number Legend
Proximity Sensor Long-distance Detection Prevents Unexpected Facility Stoppages The world's longest sensing distance* Nearly double the sensing distance of previous With high-brightness LED, the indicator
More informationInductive Proximity Sensor
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Inductive Proximity Sensor E2Q3 Square
More informationFeatures. 2-wire type available. Max. operation distance: 1.5 mm 0.06 in (Stable sensing range 0 to 1.2 mm 0.05 in)
817 Cylindrical Inductive Proximity Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms...p.1576~ guide... P.781~ General precautions... P.1579~ PHOTO PHOTO panasonic.net/id/pidsx/global
More informationCylindrical Proximity Sensor
Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough Models with a Yellow Indicator New series of TL-X2C1-GE models with improved performance over the previous TL-X-E models. Also, in addition
More information