TOYOTA RAV4 w/smart 2009 TVIP V4 PREPARATION
|
|
- Henry Weaver
- 5 years ago
- Views:
Transcription
1 PREPARATION Part #: PT Conflicts: Do not install into Vehicles manufactured from November 2012 and Onwards. Kit Contents RES ECU Gateway ECU RES ECU Bracket Gateway ECU Bracket Remote Label Key Tag Owner s Guide x1 x1 x1 x1 x2 x2 x1 RES Harness Hood switch Harness Wire Tie Medium Foam Tape Large Foam Tape Window Label Engine Room Label x1 x1 x30 x1 x2 x2 x1 Butyl Tape Harness Clamp Splicing Connector Hood Switch M6 Screw Replacement Clip x2 x4 x2 x1 x2 x1 Additional Items (may be required) Item# Description Recommended Sequence of Application Item# Description 1 TVIP V4 Remote Engine Starter 2 TVIP V5 RS3200 PLUS Recommended Tools Personal & Vehicle Protection Description Safety Glasses Safety Gloves (Optional) Vehicle Protection Blankets, Parts Boxes Special Tools Cable Wire Routing Tool Techstream Use latest version on TIS (Do not use Techstream Lite) Installation Tools Screwdriver #2 Phillips, Flat Blade Jeweler s Nylon Panel Removal Tool e.g. Panel Pry Tool #1 Toyota SST# Side Cutters Torque Wrench 36 in lbf (4.07 N m) Utility Knife Tape Clear, Electrical Socket 10mm, extension Pliers Pliers Special Chemicals Cleaner VDC Approved Cleaner Glass Cleaner Household Glass Cleaner Page 1 of 35
2 PREPARATION Table of Contents I. Preparation Table of Contents Vehicle Confirmation Wire Routing Overview II. Procedure Hood Switch Installation Vehicle Disassembly V4 Wire Harness Installation (Driver s Side) V4 Wire Harness Installation (Driver s Side Junction Box Area) V4 Wire Harness Installation (Driver s Side to Passenger s Side) Hood Switch Harness Routing RES ECU and Gateway ECU Preparation/Installation V4 Harness Installation (Continued) Registration Preparation Registration Tags and Labels Complete the Installation...32 III. Checklist Accessory Function Checks Vehicle Appearance Check Vehicle Function Checks...34 Legend Do not proceed until process has been completed. Follow steps carefully to avoid damaging the Vehicle or Accessory Use caution to avoid injury. Used in Figures to call attention to specific tools recommended for the process. Highlights a change in installation with respect to previous issue. Indicates that torque is related to safety. Video available; click to play. Accessory Installation Practice (read before installation) Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the Accessory Installation Practices document. This document covers such items as: Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.) Safety (eye protection, checking torque procedure, etc.) Vehicle Disassembly/Reassembly (panel removal, part storage, etc.) Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.) Please see your Toyota dealer for a copy of this document. Page 2 of 35
3 PREPARATION Confirm the following: Open the Driver s door and locate the Vehicle s Certification Label. [1] Confirm the Manufactured Date (MM/YY) on the Certification Label. [2] Manufactured Date (MM/YY): Before 11/12 [2] Manufactured Date (MM/YY): 11/12 and onwards Proceed with Installation of this kit. DO NOT INSTALL THIS KIT Page 3 of 35
4 Page 4 of 35 RAV4 with Smart Wire Harness Outline (Passenger s Compartment)* C D G K T S A B R *Color of Harness on Overview corresponds with Colored Tape near Connectors on Harness. b2 b1 H W J M N U V E e TVIP Vehicle Description A 8P WHITE B 8P WHITE b1 WIRE TERMINAL (Green/Red Wire) b2 WIRE TERMINAL (White/Black Wire) C IS 18P WHITE D IS 18P WHITE E 20P WHITE (for RES ECU) e 8P WHITE (for RES ECU) G E17 RED/WHITE WIRE H 2P WHITE (for Hood Switch) J E59 3P WHITE K AE6 RED WIRE M 1P WHITE (for Registration) N 1P WHITE (for Registration) R RELAY S FUSE T White Tape Marker U Gateway ECU V RES ECU W 5P WHITE (for Gateway ECU) PREPARATION
5 Page 5 of 35 RAV4 with SMART Wire Harness Outline (Engine Compartment)* b1 b2 A *Color of Harness on Overview corresponds with Colored Tape near Connectors on Harness. X TVIP Vehicle Description A 2P BLACK b1 WIRE TERMINAL (Green/Red Wire) b2 WIRE TERMINAL (White/Black Wire) X HOOD SWITCH PREPARATION
6 1. Hood Switch Installation. a. Place the Vehicle in Park with the Parking Brake set. b. Disconnect the Negative Battery Terminal. Protect the Fender. Note the Battery Cable Position as it will be re-installed in the same position. CAUTION: Do not touch the Positive Terminal. Make sure to not bend the Hood Switch Lever. If the Hood Switch is broken RES will not function. Make sure the Hood Switch Lever is positioned properly. If the Hood Switch is Broken RES will not function. c. Connect the V4 Hood Switch to the Vehicle s Hood Latch. CAUTION: Make sure the Hood Switch Lever is under the Latch Lever. d. Connect the Hood Switch Harness to the Hood Switch. Page 6 of 35
7 Side Cutters Fig. 1-4 e) Route and Secure the Hood Switch Harness as shown. (5 Wire Ties and 2 Harness Clamps) CAUTION: Do not Wire Tie the washer fluid hose. NOTE: Clean the mounting surface with VDC approved Cleaner and Cleaning Method. Page 7 of 35
8 Disassembly Overview 1 Glovebox Under Cover 2 PS Step Cover 3 PS Cowl Cover 5 4 Glovebox 5 DS Lower Dash Cover 6 DRIVER S SIDE PASSENGER S SIDE 6 DS Lower Dash Brace Disconnect all Corresponding Connectors Page 8 of 35
9 2. Vehicle Disassembly. a. Remove the Passenger s Step Cover. b. Remove the Passenger s Cowl Cover. Remove 1 Nut. c. Remove the Glove Box Under Cover. Page 9 of 35
10 d. Dislodge the Glove Box. Disconnect the Dampener. e. Remove the Glove Box. f. Remove the Driver s Side Lower Dash Cover. Remove 2 Screws. Page 10 of 35
11 g. Remove the Lower Dash Brace. Remove 2 Bolts 3. V4 Harness Installation. (Driver s Side) a. Connect the 2 V4 8P Connectors together. Page 11 of 35
12 Side Cutters Fig. 3-2 b. Route the V4 Harness from the Driver s Side to the Passengers Side. c. Route the two 18P Connectors back towards the backside of the Junction Box. Towards Backside of Drivers J/B White Tape d. Secure the V4 Harness s White Tape Marker to the Vehicle Harness near the Vehicle Harness Clamp with 1 Wire Tie. e. Secure the 2 connected V4 8P Connectors to the Vehicle Harness with 1 Wire Tie. f. Secure the V4 Fuse Box to the Vehicle Harness with 1 Wire Tie. g. Secure the TVIP Harness to the Vehicle Harness with 1 Wire Tie. Page 12 of 35
13 Side Cutters Fig V4 Harness Installation. (Driver s Side Junction Box Area) V4 ONLY a. Disconnect the Vehicle s 18P Connector from the backside of the Junction Box. b. Connect the V4 18P Connectors in between the Junction box and the Vehicle s 18P Connector. c. Secure the 18P Connectors and the V4 Harness to the Vehicle Harness with 1 Wire Tie. V4/V5 ADD-ON ONLY d. Cut the Wire Tie securing the V5 18P Connectors. e. Disconnect the Vehicle s 18P Connector from the V5 18P Connector. f. Connect the V4 18P Connectors in between the V5 Harness and the Vehicle s 18P Connector. g. Bundle up both sets of connectors and secure them and the V4/V5 Harnesses to the Vehicle Harness with 1 Wire Tie. Page 13 of 35
14 Fig. 4-4 h. Route the Red and Red/White Wires upward along the Vehicle Harness. i. Attach the Red V4 Wire to the indicated Red Wire on the Vehicle s 10P Connector with 1 Splicing Connector. Fig. 4-6 j. Disconnect the Vehicle s 19P Connector from the backside of the Junction Box. Page 14 of 35
15 k. Un-tape the V4 Red-White Wire. l. Attach it to the Red Wire on the Vehicle s 19P Connector with 1 Splicing Connector. m. Reinstall the Vehicle Connector n. Secure the V4 Red-White Wire to the Vehicle Harness with 1 Wire Tie. o. Secure the V4 Red Wire to the Vehicle Harness with 1 Wire Tie. Page 15 of 35
16 Side Cutters Fig V4 Harness Installation. (Driver s Side to Passenger s Side) a. Secure the V4 Harness to the Vehicle Brace with 1 Wire Tie. b. Secure the V4 Harness to the Vehicle Brace with 2 Wire Ties. Page 16 of 35
17 c. Disconnect the Vehicle s Blue Connector. d. Route the V4 Harness over the Vehicle Brace. e. Secure the V4 Harness to the Vehicle Harness with 2 Wire Ties. f. Re-connect the Vehicle s Blue Connector from Step c. 6. Hood Switch Harness Routing. CAUTION: DO NOT CUT ANY VEHICLE WIRES OR THE FLUID HOSE. a. Reach behind the strut and cut the Large Nipple on the Grommet. Page 17 of 35
18 b. Route the Wire Routing Tool as shown. c. Insert the Wire Routing tool through the new opening in the grommet. d. Secure the Pin Terminals from the Hood Switch Harness to the Wire Routing Tool with Electrical Tape. CAUTION: Be sure not to damage the Pin Terminals. e. Pull the Wire Routing Tool and the Hood Switch Harness through the Grommet. f. Remove the tape securing the Hood Switch Harness to the Wire Routing Tool. CAUTION: Be sure not to damage the Pin Terminals. Page 18 of 35
19 g. Using 1/2 Piece of Butyl Tape, fill the opening of the Grommet. h. Disconnect the Empty 2P Connector from the V4 Harness. i. Lift up the Terminal Retainer Clip. Do not Remove the Clip. j. Insert the Terminal on the WHITE/BLACK Wire of the Hood Switch Harness into the Connector. k. Insert the Terminal on the GREEN/RED Wire of the Hood Switch Harness into the Connector. VERIFY: Pins Terminals are properly inserted and do not come out. Close the Terminal Retainer Clip. Page 19 of 35
20 l. Re-connect the V4 2P Connectors. m. Wrap the Connectors in 1/2 Piece of Medium Foam Tape. n. Bundle up the excess Hood Switch Harness and secure it with the 2P Connectors to the Vehicle Harness with 1 Wire Tie. 7. RES and Gateway ECU s Preparation / Installation. VERIFY: How Relay is secured to the vehicle. If secured by a bracket, stop RES installation as it is not compatible with this vehicle. If secured by a Clip, continue steps below. a. Remove the Vehicle Relay. b. Disconnect the Vehicle Connector from the Relay. Page 20 of 35
21 c. Remove the Vehicle Clip from the Vehicle s Relay. d. Install the Clip provided in the TVIP V4 Kit to the Relay. e. Attach the Gateway ECU Bracket to the Gateway ECU. f. Apply 3/4 Piece of Large Foam Tape to the Gateway ECU. g. Connect the V4 5P Connector to the Gateway ECU. Page 21 of 35
22 h. Install the Gateway ECU with 1 Bolt. i. Re-connect the Vehicle s Relay to the Vehicle Harness. j. Attach the Vehicle Relay to the hole on the Gateway ECU Mounting Bracket. k. Attach the RES ECU Mounting Bracket to the RES ECU. l. Attach 1 Piece of Large Foam to the back of the RES ECU. m. Attach 1 Piece of Large Foam to the top of the ECU as shown. n. Apply one Piece of Butyl Tape as shown. NOTE: Do not remove the Protective Backing from both sides of the Butyl Tape. Page 22 of 35
23 o. Plug the V4 20P and 8P Connectors into the RES ECU. p. Remove the Protective Backing from the Butyl Tape. q. Install the RES ECU to the Vehicle using 1 Bolt. CAUTION: Make sure that the Guide Pin seats properly. 8. V4 Harness Installation. (Continued) a. Locate and remove the Tape securing the Vehicle s 3P White Pre-Connector to the Vehicle Harness. b. Connect the V4 3P White Connector to the Vehicle s 3P White Pre-Connector. Page 23 of 35
24 c. Secure the 3P Connectors and the V4 Harness to the Vehicle Harness with 1 Wire Tie. d. Route the V4 Harness downward securing it to the Vehicle Harness with 1 Wire Tie. e. Secure the Male 1P White Connector the Vehicle Harness with 1 Wire Tie. CAUTION: Do not secure the Female 1P Connector or the Bundled Wire. Page 24 of 35
25 9. Registration Preparation. a. Partially reassemble the Vehicle except for the PS Cowl and Step covers. Verify: That all Connectors are plugged in. Verify: That panels fit together properly, with no uneven gaps. r. Verify that the Short Pin is Installed. If not Install now. 10. Registration a. Open the Hood. b. Temporarily reconnect the Negative Battery Cable. CAUTION: Do not touch the Positive Terminal. Page 25 of 35
26 Fig c. Locate the 1P RES Diagnostic Connectors in the Passenger s Side Cowl Area and connect them. NOTE: Once connected you will have 10 minutes to complete this section, steps d y. Fig d. Close all doors. e. Place the Vehicle in Park (P) or Neutral (N) position. f. With the Smart Key in your possession, cycle the Engine Start Stop Button from OFF to ON 5 times. NOTE: One cycle consists of: OFF Accessory ON. This is equivalent to pressing the Engine Start Stop Button 14 times. LOOK: for the Hazard Lights to Flash once. Fig g. Start the Engine. h. After 10 seconds stop the Engine. LOOK: For the Hazard Lights to flash Once. IF THIS FAILED The Hazard Lights flash Three Times. Disconnect the V4 Harness s 1P RES Diagnostic Connectors. Start again from step c. Page 26 of 35
27 CAUTION: Techstream Lite will not work for this section, use the Techstream Notebook ONLY. i. Connect the Techstream Notebook to the Vehicle s Diagnostic Port. j. With the Smart Key in your possession, press the Engine Start Stop Button twice to select the Ignition ON position. Fig k. Start the TIS Techstream Application by clicking on the shortcut located on the Desktop. l. Click Connect to Vehicle. Fig m. Confirm that the information displayed on the Vehicle Connection Wizard is correct for the vehicle. If not verify that the Techstream is properly connected. n. Select w/smart Key. o. Click Next>. Page 27 of 35
28 Fig p. Select Smart Key. q. Click. Fig r. Click on Utility. s. Select ECU Communication ID Registration. t. Click. Fig u. Click Next>. Page 28 of 35
29 Fig v. Select Remote Engine Starter. w. Click Next>. Fig CONFIRM: That the ECU Communication ID was completed successfully. x. Click Exit. IF THIS FAILED Start again from step m. Fig y. Click Page 29 of 35
30 Fig z. Exit the vehicle. aa. Close the Hood. ab. Look for the Hazard Lights to flash Twice. IF THIS FAILED The Hazard Lights flash Three Times. Disconnect the V4 Harness s 1P RES Diagnostic Connectors. Start again from step c. ac. After a successful Registration Disconnect the 1P RES Diagnostic Connectors. ad. Using Electrical Tape secure the Female Connector and Harness to the Vehicle Harness. Page 30 of 35
31 Fig Tags and Labels. a. Using VDC approved cleaner and cleaning method, clean the area indicated on the Engine Compartment Cover. b. Attach the Engine Room Warning Label as shown. CAUTION: Do not touch the adhesive surface. Clear Tape Fig c. Using VDC approved cleaner and cleaning method, clean the indicated area on the key. d. Use a piece of Clear Tape to lift the label off its protective backing. CAUTION: Do not touch the adhesive surface. e. Attach the Key Label as shown. f. Attach the Key Tag. REPEAT: steps c f with the other Key. g. Use Household Glass Cleaner to clean the inside of the Front Door Window. h. Use a piece of Clear Tape to lift the Label from the protective backing. CAUTION: Do not touch the adhesive surface. i. Attach the Label as shown. NOTE: Make sure to Align Label according to the Etching or the Other Label. REPEAT: steps g i with the other Front Door Window. Page 31 of 35
32 Fig Complete the Installation. a. Finish reassembling the Vehicle. VERIFY: That panels fit together properly, with no uneven gaps. b. Position the Negative Battery Cable at the original factory position. Tighten the Nut to 36 in lbf (4.07 N m) CAUTION: Do not touch the Positive Terminal. c. Clean up and Remove trash. d. Sealed in its protective bag, place the Owner s Manual in the Glovebox. e. Reset the power windows. Turn the ignition ON. Lower the Windows halfway. Pull up on the Power Window Switches until the windows close. Continue to hold up on the switches for a minimum of 1 Second. f. Reset the Moon Roof. Open the Moon Roof halfway. Push and hold the Moon Roof Switch to close until the Moon Roof closes. Continue to hold the switch for a minimum of 1 Second. g. Reset the tailgate door. Push door lock control switch to the unlock side. Pull up tailgate door handle. Page 32 of 35
33 CHECKLIST these points MUST be checked to ensure a quality installation. Accessory Function Checks Close the hood, enter the vehicle and close all doors. Place the shift lever in the P (Park) position, set the parking brake and make sure the Vehicle is off. Perform 1 Press the remote control s lock button twice within 2 seconds, then press and hold the lock button for 3 seconds. 2 With the engine running, pull the hood release handle. NOTE: Some Vehicles may require you to exit the Vehicle and pull up on the Hood. 3 Move the shift lever out of P (Park). Attempt to start the Vehicle using the remote. Look For The hazard lights flash after 3 seconds. The engine starts. The hazard lights flash repeatedly for 10 seconds. The engine stops. The hazard lights flash once. The security alarm triggers. (Only if equipped with OE Factory Alarm, not Genuine Accessory alarm, and only if armed) The engine does not start. Vehicle Appearance Check Perform After accessory installation and removal of protective cover(s), perform a visual inspection of the vehicle. Look For Ensure no damage (including scuffs and scratches) was caused during the installation process. (For PPO installations, refer to TMS Accessory Quality Shipping Standard.) Page 33 of 35
34 CHECKLIST these points MUST be checked to ensure a quality installation. Vehicle Function Checks Function Function Enter the Vehicle Dome/Courtesy Lights Horn Start the Vehicle Starter Gauges Panel/Switch Steering Wheel Column Adjusts Without Interference Hood Release Latch Illumination ABS Light (if equipped) If the warning light remains on, it may indicate a system malfunction. Lamp Failure Sensor If the warning light remains on, it may Track/Skid Control Light (if equipped) If the warning light remains on, it may indicate a system malfunction. indicate a system malfunction. Seat Belt Warning Light If the warning light remains on, it may indicate a system malfunction. Air Bag Warning Light If the warning light remains on, it may indicate a system malfunction. Cruise Control Light (if equipped) Mayday ECU (if equipped) Using a Mirror or Assistant check the following. Trunk/Tailgate/Bed Lights (if equipped) Brake Lights Backup Lights Clearance Sonar (if equipped) Tire Pressure Monitoring System (TPMS) Prior to TPMS activation and Pre-delivery Service (PDS) of the Vehicle the TPMS light will blink when IG is turned on. After TPMS activation and PDS of the Vehicle the TPMS light will illuminate for a few seconds and go off when IG is turned on. Tail Lights Daytime Running Lights (if equipped) Marker Lights Stop the Engine, Place the Vehicle s IG in the ON position. Hazard Lights Turn Signal Lights Head Light High Fog Lights (if equipped) Beams Accessory Controls/Illumination (if equipped) Power Side Mirrors (if equipped) Convenience Memory Settings (if equipped) Page 34 of 35
35 CHECKLIST these points MUST be checked to ensure a quality installation. Function Front Wiper/Washer Power Function Rear Wiper/Washer (if equipped) Sun/Moon Roof (if equipped) Rollover Side Curtain Air Bag Switch (RSCA) (if equipped) Clock (if equipped) Audio/Video (if equipped) Steering Wheel Audio Control (if equipped) HVAC Front Windshield Defogger (if equipped) Side Mirror Defogger (if equipped) Massage Seats (if equipped) Navigation System (if equipped) USB Connections (if equipped) Rear Window Defogger (if equipped) Accessory Power Socket (if equipped) Heated/Vented Seats (if equipped) Glove box Light (if equipped) Power Locks (if equipped) Power Seats (if equipped) Passenger Air Bag Switch (if equipped) Power Windows (if equipped) Key Sensor Buzzer Page 35 of 35
TOYOTA VENZA w/smart 2009 TVIP V4 PREPARATION
PREPARATION Part #: PT398-0T110 Conflicts: Will not program with Techstream Lite. Kit Contents RES ECU RES ECU Bracket RES Harness M6 Screw Wire Tie Splicing Connector Remote Label x1 x1 x1 x1 x5 x1 x2
More informationTOYOTA COROLLA 2010 TVIP V4 PREPARATION
PREPARATION Part #: PT398-02080 or PT398-02100 NOTE: Part number of this accessory may not be the same as the part number shown. Conflicts: Do not install into Manual Transmission Vehicles or Vehicles
More informationLEXUS RX 450h 2010 TVIP V4 PREPARATION
PREPARATION Part #: PT398-48112 Conflicts: Kit Contents Will not Program with Techstream Lite. RES ECU RES ECU Bracket RES Harness Key Tag Engine Room Label Remote Label Window Label English x2 English
More informationTOYOTA PRIUS 2010 TVIP V4 PREPARATION
PREPARATION Part #: PT398-47091 Conflicts: NOTE: Part number of this accessory may not be the same as the part number shown. Do not install into Manual Transmission Vehicles or Vehicles without RKE systems.
More informationTOYOTA HIGHLANDER w/smart Key TVIP V4 REMOTE ENGINE STARTER (RES) Part Number: PT
Preparation Part Number: PT398-48083 Conflicts Do not install into vehicles without RKE systems. Will not program with Techstream Lite. Recommended Sequence of Application Item # Accessory Kit Contents
More informationTOYOTA COROLLA 2009 TVIP V4 PREPARATION
PREPARATION Part #: PT398-02080 Conflicts: NOTE: Part number of this accessory may not be the same as the part number shown. Do not install into Manual Transmission Vehicles or Vehicles without RKE systems.
More informationTOYOTA PRIUS 2010 TVIP V5 PREPARATION
PREPARATION Part #: PT398-47090 Conflicts: NOTE: Part number of this accessory may not be the same as the part number shown. Do not install into Manual Transmission Vehicles or Vehicles without RKE systems.
More informationTOYOTA SIENNA w/smart Key and Factory Alarm 2015 TVIP V4 PREPARATION
PREPARATION Part #: PT398-08150 Conflicts: Kit Contents Do not install into Vehicles without Smart Key and Factory Alarm. RES ECU RES ECU Bracket V4 Harness Nut Wire Tie Remote Label Key Tag x1 PT398-0T097
More informationTOYOTA SEQUOIA TVIP V4 REMOTE ENGINE STARTER (RES)
Preparation Part Number: PT398-34111 NOTE: Part number of this accessory may not be the same as the part number shown. Conflicts Do not install into vehicles without RKE system. Recommended Sequence of
More informationTOYOTA VENZA 2009 TVIP V2 PREPARATION
PREPARATION Part #: PT398-0T092 Conflicts: Kit Contents Do not install into Vehicles without Factory Alarm System. GBS ECU GBS ECU Bracket GBS Harness GBS Microphone Wire Tie Foam Tape M6 Tapping Screw
More informationLEXUS CT 200h 2011 TVIP V2 PREPARATION
PREPARATION Part #: PT398-76110 Conflicts: Kit Contents GBS ECU V2 Harness GBS ECU Bracket Nut Microphone Foam Tape Wire Tie x1 x1 x1 x1 x1 x2 x15 08190-0C820 08192-6C820 Window Label Owner s Guide PT398-60084
More informationLEXUS RX TVIP V2 PREPARATION
PREPARATION Part #: PT398-48090 Conflicts: NOTE: Part number of this accessory may not be the same as the part number shown. Do not install into Vehicles without Factory Alarm System. Kit Contents GBS
More informationLEXUS ES TVIP V2 PREPARATION
PREPARATION Part #: PT398-33132 Conflicts: Kit Contents GBS ECU GBS ECU Bracket V2 Harness M6 Bolt Washer Wire Tie GBS Microphone x1 x1 x1 x1 x1 x5 08190-0C820 91651-60618 08192-6C820 x1 Foam Tape V2 Window
More informationTOYOTA TUNDRA TVIP V5
Preparation Part Number: PT398-34142 Conflicts Do not install into vehicles with Factory Alarm Systems or SR grade vehicles. Do not use Techstream Lite for Registration. Recommended Sequence of Application
More informationTOYOTA Highlander / Highlander HV 2014 TVIP V2 PREPARATION
PREPARATION Part #: PT398-48141 Conflicts: Do not install into Vehicles without Factory Alarm System. Kit Contents GBS ECU GBS ECU Bracket V2 Harness M6 Nut Bolt Jumper Connector Wire Tie DISCARD x1 08190-0C820
More informationTOYOTA PRIUS V 2012 TVIP V4 PREPARATION
PREPARATION Part #: PT398-47121 Conflicts: Will not program with Techstream Lite. Kit Contents Screw RES ECU RES ECU Bracket Hood Switch V4 Harness Remote Label (for Hood SW) Wire Tie PT398-0T097 x1 x1
More informationTOYOTA HIGHLANDER w/o Smart Key TVIP V4 REMOTE ENGINE STARTER (RES)
Preparation Part Number: PT398-48111 Conflicts Do not install into vehicles without RKE systems. Recommended Sequence of Application Item # Accessory Kit Contents Item # Quantity Description 1 1 Wire Harness
More informationTOYOTA TUNDRA TVIP V4 REMOTE ENGINE STARTER (RES)
Preparation Part Number: 08586-OC910 Conflicts Do not install into vehicles without RKE systems. Recommended Sequence of Application Item # Accessory 1 TVIP/RES Any TVIP or RES system 2 XM Radio NOTE:
More informationTOYOTA CAMRY wo/smart entry TVIP V4 REMOTE ENGINE STARTER (RES)
Preparation Part Number: 08586-3T950 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 RES ECU 3 1 BUS ECU 4 1 ECU Mounting Bracket (A) 5 1 ECU Mounting Bracket (B) 6 1 Butyl Tape Hardware
More informationSCION tc 2011 TVIP V4 PREPARATION
PREPARATION Part #: PT398-21111 Conflicts: NOTE: Part number of this accessory may not be the same as the part number shown. Do not install into Manual Transmission Vehicles or Vehicles without RKE systems.
More informationTOYOTA CAMRY TVIP V2 (GBS WITH ADD ON)
Preparation Part Number: 08586-3T930 Kit Contents Item # Quantity Reqd. Description 1 2 Wire Harness (One wire harness is only for RS3200+) 2 1 GBS ECU 3 1 GBS Mounting Bracket 4 1 Microphone Hardware
More informationTOYOTA TACOMA TVIP V5
Preparation Part Number: PT398-35121 Conflicts Note: Must not be installed in Vehicles with Factory Alarm System and 2013- Vehicles with (4WD Double Cab 6MT and Off-Road Package). Kit Contents Item # Quantity
More informationSCION xa LIMITED EDITION SECURITY WITH RKE (V3)
Preparation Part Number: 08586-53840 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 V3 Security ECU 3 2 Remote Control Transmitters 4 1 Piezo Buzzer 5 1 Status Monitor 6 1 Radar Sensor
More informationTOYOTA RAV TVIP V5
Preparation Part Number: 08586-42810 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 GBS ECU 3 1 Security ECU Mounting Bracket 4 1 GBS ECU Mounting Bracket 5 1 Status Monitor 6 1 Security
More informationSCION tc SECURITY (V5) Preparation
Preparation Part Number: PT398-21070 Kit Contents Item # Quantity Reqd. Description 1 1 2 1 GBS ECU Hardware Bag Contents Item # Quantity Reqd. Description 1 1 V5 Security ECU 2 1 ECU Mounting Bracket
More informationTOYOTA 4Runner w/o Smart 2012 TVIP V4 PREPARATION
PREPARATION Part #: PT398-89140 Conflicts: Kit Contents Will not program with Techsream Lite. RES ECU RES ECU Bracket RES Harness Hood Switch Hood Switch Screw M6 Bolt Wire Tie x1 x1 x1 x1 PT398-89100-NS
More informationTOYOTA HIGHLANDER TVIP V2 (GBS ADD ON) Preparation
Preparation Part Number: 08586-48070 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 GBS ECU 3 1 ECU Mounting Bracket Hardware Bag Contents Item # Quantity Reqd. Description 1 1 Microphone
More informationTOYOTA CAMRY HYBRID TVIP V5 (RS3200 PLUS) Preparation
Preparation Part Number: 08586-3T940-AA Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 3 1 ECU Mounting Bracket NOTE: Part number of this accessory may not be the same as the part number
More informationSCION tc 2014 TVIP V4 PREPARATION
PREPARATION Part #: PT398-21111 Conflicts: Kit Contents Do not install into Vehicles with Smart key or Manual Transmission Vehicles. Will not program with Techstream Lite. Hood Switch RES ECU RES ECU Bracket
More informationTOYOTA TUNDRA TVIP V5
Preparation Part Number: 08586-OC890 Conflicts Do not install into vehicles with Factory Alarm Systems or without Immobilizer. Do not use Techstream Lite for Registration. Recommended Sequence of Application
More informationTOYOTA TUNDRA TVIP V4 Preparation
Preparation Part Number: PT398-00100 PT398-00100-AA Conflicts Do not install into vehicles without RKE system. Recommended Sequence of Application Item # Accessory 1 TVIP/RES Any TVIP or RES system 2 XM
More informationTOYOTA TACOMA TVIP V5
Preparation Part Number: PT398-35090 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Security ECU 3 1 GBS ECU 4 1 Status Monitor/Microphone 5 2 Warning Labels (English) 6 2 Warning
More informationTOYOTA FJ CRUISER TVIP V5 Preparation
Preparation Part Number: 08586-36822 Conflicts Do not be installed in vehicles with factory Anti-theft alarm, or Vehicle without Factory Keyless Entry Systems. Recommended Sequence of Application Item
More informationTOYOTA YARIS HATCHBACK TVIP V3 (RS3200) Preparation
Preparation Part Number: 08586-53810 Kit Contents Item # Quantity Reqd. Description 1 1 V3 ECU 2 1 Piezo Buzzer 3 1 Wire Harness 4 1 ECU Mounting Bracket 5 2 Remote Control Transmitter 6 1 Butyl Tape 7
More informationTOYOTA TACOMA 2005 TVIP V5 (RS3200 PLUS) Preparation
Preparation Part Number: 08586 04840 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Security ECU 3 1 GBS ECU 4 1 Status Monitor 5 2 Warning Labels 6 1 Owner s Manual 7 1 Warranty Card
More informationTOYOTA HIGHLANDER IMPACT SENSOR
TOYOTA HIGHLANDER 2010 - IMPACT SENSOR Part Number : 00016-47031 Accessory Code: QG1 Conflicts Not for installation on vehicles with factory theft deterrent systems - hybrid. Kit Contents Item # Quantity
More informationTOYOTA RAV TVIP V3
Section I Installation Preparation Part Number: 08586-4A872 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Status Monitor 3 1 Piezo Buzzer 4 1 V3
More informationTOYOTA TUNDRA IMPACT SENSOR
TOYOTA TUNDRA 2010 - IMPACT SENSOR Part Number: 00016-47031 Accessory Code: QG1 Kit Contents Item # Quantity Reqd. Description 1 1 Security Interface Module 2 1 Shock Sensor 3 1 Main Harness 4 1 Hardware
More informationTOYOTA TACOMA TVIP V3 (RS3200) Section I - Installation Preparation
Section I - Installation Preparation Part Number: 08586-04810 Section I - Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Status Monitor 3 1 Piezo Buzzer 4
More informationTOYOTA YARIS KEYLESS ENTRY SYSTEM
TOYOTA YARIS 2011 - KEYLESS ENTRY SYSTEM Part Number: 00016-32901 Accessory Code: KE1 Conflicts Not for installation in vehicles equipped with factory installed keyless entry. Kit Contents Item # Quantity
More informationTOYOTA Highlander / Highlander HV 2017 TVIP V4 PREPARATION
PREPARATION Part #: PT398-48171 Conflict Do not install into Vehicles without Smart Key system. Recommended Sequence of Application Item# Quantity Description 1 1 V4 RES 2 1 V2 GBS or V5 RS3200 Plus Kit
More informationXM Adapter Cable (P/N: ) MUST be used for this vehicle.
TOYOTA 2013 - Part Number:00016-00076 Code: RX30 XM Adapter Cable (P/N: 00016-00076-10) MUST be used for this vehicle. Conflicts 1. Entune 2. Vehicle s with factory XM radio Kit Contents Item # Qty Description
More informationVehicle Service Parts (may be required for reassembly) Legend
Toyota Part Number: 00016-32901 Accessory Code: KE1 Corolla 2014 Note: Not for installation on vehicles equipped with factory keyless entry Additional Items Required For Installation Item# Quantity Req.
More informationConflicts. TOYOTA Camry XM Satellite Radio. Part Number: Code: RX30. Vehicle Service Parts (May be required for reassembly)
TOYOTA 2013 - Part Number:00016-00076 Code: RX30 Conflicts 1. Entune 2. Vehicle s with factory XM radio Kit Contents Item # Qty Description 1 1 XM Module 2 1 XM Tuner Module 3 1 Wiring Harness 4 1 Hardware
More informationSCION xa 2004 SECURITY WITH RKE (V3) Section I Installation Preparation
Section I Installation Preparation Part Number: 08586 52970 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 V3 Security ECU 3 2 Remote Control Transmitters
More informationVehicle Service Parts (may be required for reassembly) Legend
Toyota Corolla 2016 Part Number: 00016-32901 Accessory Code: KE1000 Conflicts Note: Not for installation on vehicles equipped with factory keyless entry Additional Items Required For Installation Item#
More informationREMOTE ENGINE STARTER
2008- LAND CRUISER TVIP V4 REMOTE ENGINE STARTER (RES) TROUBLESHOOTING GUIDE REMOTE ENGINE STARTER TROUBLESHOOTING GUIDE Rev. B 01/18/06 Remote Engine Starter Troubleshooting Guide Page 2 TABLE OF CONTENTS
More informationConflicts. TOYOTA Prius XM Satellite Radio. Part Number: Code: RX30. Vehicle Service Parts (May be required for reassembly)
TOYOTA Prius 2013 - Part Number:00016-00076 Code: RX30 Conflicts 1. Entune 2. Vehicle s with factory XM radio Kit Contents Item # Qty Description 1 1 XM Module 2 1 XM Tuner Module 3 1 Wiring Harness 4
More informationKia Sedona. Installation Manual: Kia Sedona. Power Lift Gate System. Page 1 of 13
Kia Sedona Installation Manual: Kia Sedona Power Lift Gate System Page 1 of 13 NOTE: Installation Precaution 1. It is recommended to have this product installed by a professional to avoid damage caused
More informationSCION xb 2004 SECURITY (V5) Section I Installation Preparation. Part Number:
Section I Installation Preparation Part Number: 08586 52960 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Mounting Bracket 3 1 GBS ECU 4 1 Security
More informationTOYOTA PRIUS 2004 TVIP V2 (GBS ADD ON) Section I Installation Preparation
Section I Installation Preparation Part Number: 08586 47840 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 3 1 ECU Mounting Bracket Hardware Bag
More informationLEXUS RC 350/RC-F ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT944-24150 Kit Contents Item # Quantity Reqd. Description 1 2 Inner LED Scuff 2 2 Outer Scuff 3 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description 1 15 20
More informationToyota Sienna. Installation Manual: Toyota Sienna. Power Lift Gate System. Page 1 of 12
Toyota Sienna Installation Manual: Toyota Sienna Power Lift Gate System Page 1 of 12 NOTE: Installation Precaution 1. It is recommended to have this product installed by a professional to avoid damage
More informationConflicts. Scion FR-S Keyless Entry Upgrade Alarm Part Number: Code: YQ20. Vehicle Service Parts (may be required for reassembly)
2013 - Part Number: 00016-32910 Code: YQ20 Conflicts Kit Contents Item# Quantity Req. Description 1 1 Security Module 2 1 Shock Sensor, Dual Stage 3 1 LED / Valet Swicth 4 2 Window Warning Decals 5 1 Shock
More informationConflicts. Camry L (ECO Grade) Security System with Keyless Entry. Part Number: Accessory Code: QK1
2013- Part Number: 00016-32905 Accessory Code: QK1 Conflicts Note: NOT FOR INSTALLATION ON VEHICLES WITH FACTORY THEFT DETERRENT SYSTEMS. Kit Contents Item # Quantity Reqd Description 1 1 Keyless Security
More informationChevrlot Equinox. Installation Manual: Chevrlot Equinox. Power Lift Gate System. Page 1 of 11
Chevrlot Equinox Installation Manual: Chevrlot Equinox Power Lift Gate System Page 1 of 11 NOTE: Installation Precaution 1. It is recommended to have this product installed by a professional to avoid damage
More informationTOYOTA TUNDRA TVIP V3 (RS3000) Section I - Installation Preparation
Section I - Installation Preparation Part Number: 0886-34861 Section I - Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Status Monitor 3 1 Piezo Buzzer 4 1
More informationInstallation Manual: Honda CRV Power Lift Gate System
Installation Manual: Honda CRV Power Lift Gate System Page 1 of 18 NOTE: Installation Precaution 1. It is recommended to have this product installed by a professional to avoid damage caused by improper
More informationInstallation Manual: Hyundai Tucson Power Lift Gate System
Installation Manual: Hyundai Tucson Power Lift Gate System Page 1 of 12 NOTE: Installation Precaution 1. It is recommended to have this product installed by a professional to avoid damage caused by improper
More informationNissan Rogue. Installation Manual: Nissan Rogue. Power Lift Gate System. NOTE: Not for Rogue Sport Models. Page 1 of 13
Nissan Rogue Installation Manual: Nissan Rogue Power Lift Gate System NOTE: Not for Rogue Sport Models Page 1 of 13 NOTE: Installation Precaution 1. It is recommended to have this product installed by
More informationTOYOTA 4Runner Keyless Entry Upgrade Alarm
TOYOTA 4Runner 2013 - Keyless Entry Upgrade Alarm Part Number: 00016-32910 Accessory Code: QSNS10 Conflicts Note: NOT FOR INSTALLATION ON VEHICLES EQUIPPED WITH SMART KEY General Applicability Used on
More informationFord Escape. Installation Manual: Ford Escape. Power Lift Gate System. Page 1 of 12
Ford Escape Installation Manual: Ford Escape Power Lift Gate System Page 1 of 12 NOTE: Installation Precaution 1. It is recommended to have this product installed by a professional to avoid damage caused
More informationConflicts. Prius C 2014 Keyless Entry Upgrade. TOYOTA Part Number: Code: QS10. Vehicle Service Parts (May be required for reassembly)
TOYOTA Part Number:00016-47032 Code: QS10 Conflicts 1. Vehicle's with out factory immobilizer Kit Contents Item# Quantity Req. Description 1 1 Security Module 2 1 Shock Sensor, Dual Stage 3 1 LED / Valet
More informationInstallation Manual: Jeep Cherokee Power Lift Gate System
Installation Manual: Jeep Cherokee Power Lift Gate System Page 1 of 11 NOTE: Installation Precaution Kit Details Power Cable 4120353 1. It is recommended to have this product installed by a professional
More informationTOYOTA TACOMA HANDS FREE BLU LOGIC Preparation. Item 5 Item 6 Item 7 Item 8. Item 4. General Applicability Note: Recommended Tools
TOYOTA TACOMA 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00098 Conflicts: JBL Audio, Factory Navigation Kit Contents: NOTE: Part number of this accessory may not be the same as the part number
More informationInstallation Manual: Jeep Cherokee Power Lift Gate System
Installation Manual: Jeep Cherokee Power Lift Gate System Page 1 of 11 NOTE: Installation Precaution 1. It is recommended to have this product installed by a professional to avoid damage caused by improper
More informationTOYOTA CAMRY HANDS FREE BLU LOGIC Preparation
TOYOTA CAMRY 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationSCION tc Navigation System Preparation. Part Number: PT
Preparation Part Number: PT611-21111 Kit Contents Item # Quantity Reqd. Description 1 1 Navigation System 2 1 GPS Antenna 3 1 Bluetooth Antenna 4 1 Wire Harness (Reverse / Park Brake) 5 1 RCA Relay Cable
More informationTOYOTA LAND CRUISER 2016 TVIP V4 PREPARATION REMOTE ENGINE STARTER (RES)
PREPARATION Part Number: PT398-60160 Kit Contents Item # Quantity Description 1 1 RES ECU 2 1 RES Bracket 3 1 Wire Harness Hardware Bag Contents Additional Item# Quantity Description 1 10 Wire Ties 2 1
More informationTOYOTA TACOMA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-35052 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 1 T-tap Connectors,
More informationNissan Rogue. Installation Manual: Nissan Rogue. Power Lift Gate System. Page 1 of 13
Nissan Rogue Installation Manual: Nissan Rogue Power Lift Gate System Page 1 of 13 NOTE: Installation Precaution 1. It is recommended to have this product installed by a professional to avoid damage caused
More informationConflicts. TOYOTA Highlander CAR LINK (W/O Remote Start) Part Number: Accessory Code: QL1. Doc PIO / DIO Rev.
Doc. 06.107.00 PIO / DIO Rev. A 04/26/11 TOYOTA Highlander 2011 - CAR LINK (W/O Remote Start) Part Number: 00016-00077 Accessory Code: QL1 Conflicts Note: Kit Contents Item # Quantity Reqd. Description
More informationGeneral Applicability Note: Recommended Tools. Personal & Vehicle Protection Safety Goggles Seat Covers Floor Covers Special Tools. Installation Tools
TOYOTA HIGHLANDER/HIGHLANDER HV 2008- Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationTOYOTA im INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT922-12170 Kit Contents Item # Quantity Reqd. Description 1 1 Main Wire Harness 2 1 Switch 3 1 Switch Header 4 1 ECU 5 1 ECU Bracket 6 1 Hardware Kit 7 1 Instruction Card 8 1
More informationSCION XB HANDS FREE BLU LOGIC Preparation
SCION XB 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationTOYOTA TUNDRA HANDS FREE BLU LOGIC Preparation
TOYOTA TUNDRA 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationTOYOTA tc HANDS FREE BLU LOGIC Preparation
TOYOTA tc 2011- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationSCION xa AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-52040 (Compass) PT374-21050 (Homelink) Kit Contents Item # Quantity Reqd. Description 1a 1 AD Mirror Assembly w/compass & Map Lights (P/N PT374-52040) 1b 1 AD Mirror Assembly
More informationSCION XB HANDS FREE BLU LOGIC Preparation. Item 4 Item 5 Item 6 Item 7. General Applicability. Note: Recommended Tools
SCION XB 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00090 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: Item 1 Item 2 Item
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationSCION tc ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PTS21-21070 Kit Contents Item # Quantity Reqd. Description 1 2 Hardware Kit w/ power harness 2 1 Front Left Illuminated Door Sill Protector 3 1 Front Right Illuminated Door Sill
More informationLEXUS CT 200h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-89100 Kit Contents Item # Quantity Req'd. Description 1 1 Door Sill, Front Right Hand 2 1 Door Sill, Front Left Hand 3 1 Door Sill, Rear Right Hand 4 1 Door Sill, Rear Left
More informationTOYOTA VENZA HANDS FREE BLU LOGIC Preparation
TOYOTA VENZA 2009- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationTOYOTA RAV INTERFACE KIT FOR IPOD Preparation Part Number: PT
Preparation Part Number: PT545-00082 NOTE: Part number of this accessory may not be the same as the part number shown. General Applicability Note: Kit Contents Item # Quantity Reqd. Description 1 1 Unit
More informationTOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT413-42130 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 20 Cable Tie 2 2 Scotchlok 3 2 Foam Pad
More informationLEXUS GS 350/450h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-30120 (GS350) PT922-30130 (GS450h) NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Req'd. Description 1 1 Illuminated
More informationTOYOTA SOLARA CONVERTIBLE XM SATELLITE RADIO Preparation. Part Number: Mounting Kit PT
Preparation Part Number: Mounting Kit PT546-06061 Tuner Assy 86180-0W030 Tuner Assy Kit Contents (86180-0W030) 1 1 Tuner Assy, Stereo Component Mounting Kit Contents (PT546-06061) 1 Ground Cable 1 1 Wire,
More informationConflicts: JBL Audio, Factory Navigation, Accessory XM Satellite Radio, and Accessory Sirius Satellite Radio
TOYOTA YARIS SEDAN 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 NOTE: Part number of this accessory may not be the same as the part number shown. Conflicts: JBL Audio, Factory Navigation,
More informationScion xb EC Rearview Mirror w/ Shift Light Preparation
2008 - Preparation Part Number: 00016-79800 Accessory Code: YM10 Kit Contents Item # Quantity Reqd. Description 1 1 Mirror Assembly w/ PRNDL 2 1 Hardware bag 3 1 Installation Manual Hardware Bag Contents
More informationSCION iq AUDIO Preparation
Preparation Part Number: PT546-00140 (Base Radio) Kit Contents Item # Quantity Reqd. Description 1 1 Receiver Assembly, Radio Unit 2 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationSCION xb AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationTOYOTA RAV TRAILER WIRE HARNESS Section I Installation Preparation
Section I Installation Preparation Part Number: 08921-42900 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Wire harness 3 1 Sub wire harness No.1 4 2 Plastic Tie (300mm) 5 21 Plastic
More informationSCION xb EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationSCION TC HANDS FREE BLU LOGIC Preparation
SCION TC 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00099 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationPart Number: PT
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationTOYOTA YARIS XM SATELLITE RADIO Preparation (Sedan & Hatchback)
Preparation (Sedan & Hatchback) Part Number: Mounting Kit PT546-52096 Tuner Assy 86180-0W031 Tuner Assy Kit Contents (86180-0W031) Item # Quantity Reqd. Description 1 1 Tuner Assy, Stereo Component Mounting
More informationTOYOTA SIENNA TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT791-08150 (non-se) PT791-08102 (SE only) Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Module Harness 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting
More informationTOYOTA COROLLA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationSCION tc PREMIUM AUDIO Preparation. Part Number: PT (Extension Module w/ AHA)
Preparation Part Number: PT296-12160 Kit Contents Item # Quantity Reqd. Description 1 1 Extension Module 2 1 BT cable 3 1 DA/Ext Harness 4 1 GPS Antenna kit 5 6 Bolt (M5x8) 6 5 Wire tie (10 ) Hardware
More information