Proportional Control Valves

Transcription

1 Proportional Control Valves

2 ProControl Proportional Valves Humphrey ProControl Proportional Valves provide superior proportional control performance, versatility, and value. Utilizing a frictionless, flat-spring armature, ProControl achieves excellent flow characteristics and long life in a simple, compact construction. MINIATURE Control up to 24 LPM SMALL Control up to 65 LPM 0 LARGE Control up to 300 LPM Manifold Mount FEATURES AND BENEFITS: Low hysteresis throughout the range Excellent flow control Low power consumption Long, trouble-free life Quiet operation Compact construction Made in the USA RoHS and REACH compliant Manifold Mount 0 TYPICAL APPLICATIONS: Selectable or dynamic control of media flow Control of downstream pressure Vacuum control applications Operation of small bore cylinders 0 Manifold Mount

3 Half-Sections, Specifications, Drawings & Charts 30 Performance,, 0 10v, 0.025" Orifice (Typical) Core Coil psi 50 psi 100 psi Armature Nozzle FLOW (LPM) Pressure OUT Port 2 IN Port) Pressure IN Port 1 OUT Port) AMPERAGE (A) Specifications Type of Operation: Function: Media: Direct Acting 2-Way, Normally Closed Air, Vacuum or Inert Gas Ambient Temp. Range: -20º to 200ºF Standard Pressures and Available PSIG Maximum Flow (TYP): Lubrication:.025 /.040 / / LPM Not required Typical Hysteresis: <15% Filtration: Response Time Capability 40 Micron <10 ms Weight (lbs): 0.15 Wetted Materials: ENP Brass, Stainless Steel, Nickel Plated Steel, FKM Power Consumption (watts): 2.0 Nominal (Ohms): Input Current for Full Flow (ma): Note: Consult factory for minimum pressure requirements and vacuum service Dimensional Drawings Mounting Hole Pattern #6-32 ` 0.25 Manifold Mount Dimensional Drawings O.854 O.093 MAX O.110 MAX CHAMFER O.88 O O.430 CIRCLE THREADS x.200` MIN.015 x 45 EDGE CHAMFER INTERFACE DIMENSIONS.19 PORT UNF ACROSS FLATS 1.55 PORT UNF.19 R O EF THREAD FLAT TO FLAT DIMENSION: 0 (THRU SCREW) BETWEEN O-RINGS ON CIRCLE DIAMETER SHOWN

4 Half-Sections, Specifications, Drawings & Charts 70 Performance,, 0~10v, 0.040" Orifice (Typical) psi 50 psi 100 psi Core Coil Armature FLOW (LPM) Pressure OUT Port 2 IN Port) Nozzle Pressure IN Port 1 OUT Port) AMPERAGE (A) Specifications Type of Operation: Function: Media: Direct Acting 2-Way, Normally Closed Air, Vacuum or Inert Gas Ambient Temp. Range: -20º to 200ºF Standard Pressures and Available PSIG Maximum Flow (TYP): Lubrication:.040 /.060 / / LPM Not required Typical Hysteresis: <15% Filtration: Response Time Capability 40 Micron <10 ms Weight (lbs): 0.4 Wetted Materials: ENP Brass, Stainless Steel, Nickel Plated Steel, FKM Power Consumption (watts): 5.8 Nominal (Ohms): Input Current for Full Flow (ma): Note: Consult factory for minimum pressure requirements and vacuum service Dimensional Drawings Mounting Hole Pattern #6-32 ` 0.25 Manifold Mount Dimensional Drawings O O.093 MAX O.110 MAX CHAMFER O.430 CIRCLE.73 O.88 O.73 O THREADS x.200` MIN.015 x 45 EDGE CHAMFER INTERFACE DIMENSIONS O PORT THREADS ACROSS FLATS.76 PORT THREADS O THREAD SCREW (THRU SCREW) BETWEEN O-RINGS ON CIRCLE DIAMETER SHOWN FLAT TO FLAT DIMENSION: 0

5 0 Half-Sections, Specifications, Drawings & Charts Core Coil Performance, 0, 0 10v, 0.156" Orifice (Typical) 25psi 50psi 100psi Armature Nozzle FLOW (LPM) Pressure OUT Port 2 IN Port) Pressure IN Port 1 OUT Port) AMPERAGE (A) Specifications Type of Operation: Function: Media: Direct Acting 2-Way, Normally Closed Air, Vacuum or Inert Gas Ambient Temp. Range: -20º to 200ºF Standard Pressures and Available PSIG Maximum Flow (TYP): Lubrication:.156 /.188 / / LPM Not required Note: Consult factory for minimum pressure requirements and vacuum service. Typical Hysteresis: <15% Response Time Capability <10 ms Weight (lbs): 0.9 Wetted Materials: Aluminum, Stainless Steel, Nickel Plated Steel, FKM Power Consumption (watts): 5.8 Nominal (Ohms): Input Current for Full Flow (ma): Dimensional Drawings Mounting.75 Hole Pattern 1 Manifold Mount Dimensional Drawings RED - 10 VDC WHITE - 20 VDC 1/4 x 28 `.25 RED - 10 VDC WHITE - 20 VDC O.125 MAX O.155 MAX CHAMFER O O.860 CIRCLE PORT 1/4 NPSF O O O 1 OVER FLATS PORT 1/4 NPSF 1.51 O 1.82 O /8-24 THREADS.32 3/8-24 THREADS x.375` MIN.025 x 45 EDGE CHAMFER INTERFACE BETWEEN 0-RINGS ON CIRCLE DIAMETER SHOWN THRU CENTER

6 How to Order ProControl Proportional Valves ELECTRICAL CONNECTION V Wire Leads + PORT TYPE P PM Manifold EP Metric Port VP A0 CURRENT mA 20-73mA ORIFICE SIZE (100 PSIG max) (50 PSIG max) (25 PSIG max) MAXIMUM PRESSURE* PSIG PSIG A0-100 PSIG Order Example: -VP A0 * Corresponding Maximum PSIG Orifice Size 25, 50, A orifice 25, orifice orifice How to Order ProControl Proportional Valves ELECTRICAL CONNECTION V Wire Leads + PORT TYPE P PM Manifold EP Metric Port VP Order Example: -VP CURRENT ORIFICE SIZE MAXIMUM mA (100 PSIG max) PRESSURE* * Corresponding mA (50 PSIG max) PSIG Maximum PSIG Orifice Size (25 PSIG max PSIG 25, 50, A orifice A0-100 PSIG 25, orifice orifice How to Order ProControl 0 Proportional Valves ELECTRICAL CONNECTION V Wire Leads + PORT TYPE P PM Manifold EP Metric Port 0 VPM A0 CURRENT mA mA ORIFICE SIZE (100 PSIG max) (50 PSIG max) (25 PSIG max MAXIMUM PRESSURE* PSIG PSIG A0-100 PSIG Order Example: 0-VPM A0 * Corresponding Maximum PSIG Orifice Size 25, 50, A orifice 25, orifice orifice While the medical, analytical instrumentation and testing/measurement applications have been common, ProControl valves are suitable for most market segments, including ProControl pressure regulators. The flexible valve design can be tailored to meet specific requirements, via Humphrey Engineered Solutions. For more information on Engineered Solutions, please visit A privately owned US company since Humphrey Products Company P.O. Box 2008 Kalamazoo, MI USA P F PCPV-2016 Copyright 2016 Humphrey Products Company, Inc. Printed in U.S.A.