Installation Instructions

Size: px
Start display at page:

Download "Installation Instructions"

Transcription

1 Instructions Created by an: Inchworm Gear Clockable Toyota Dual Transfer Case Adapter Kit, 21 or 23 Spline SKU# TCASE-IW Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and equipment. For additional copies of these and other instructions go to: and click on the Instructions tab. Suggested Tools: Welder (MIG or TIG) Socket: 14mm Allen Socket: 8mm Ratchet 14 mm Combination Wrench Torque Wrench Snap Ring Pliers Wheel Bearing Grease Brake Cleaner Hammer Slip-joint Pliers Permatex Gear Oil RTV Gasket Maker (or Equivalent) Angel Grinder Die Grinder W/ Cut-Off Wheel Blue Permatex Threadlocker

2 Parts Identification * (I) = Inchworm Supplied Part (C) = Customer Supplied Part Contents of Hardware Kit *(I) Crawl Box Case (C) Rear Dual Case Adapter (I) Dual Case Coupler (I) Counter Gear Assembly (C) Main Shaft Needle Bearing (C) Front Dual Case Adapter (I) Input Shaft (C) Snap Ring (I) Low Range Gear (C) Thrust Washer (I) Input Needle Bearing (C) Shifter Shaft (C) Shifter Fork (C)

3 Background Information For best results throughly clean all parts and assemble them in a dust free environment. Additionally, it is recommended that you double check each part DURING the assembly process to insure a clean, quality installation. Step 1 Install the main shaft needle bearing on the duel case coupler. Step 2 Apply a good quality wheel bearing grease to the main shaft needle bearing.

4 Step 3 Install the dual case coupler inside the low range gear. Step 4 Install the detent ball in the hole shown here. Tech Tip 4 Detent ball properly positioned. Step 5 Apply some grease to the thrust washer.

5 Step 6 Install the thrust washer on the dual case coupler with the greased side down. Tech Tip 6 Insure that the notch in the thrust washer aligns with the ball. Warning Please use extreme caution with the next steps. There are several ways to press the dual case coupler into the front dual case adapter bearing. We will show one option and explain another. Step 7 Install the low range gear assembly in the front dual case adapter as shown. It will not go all the way with out some force.

6 Option 1 (Without a press) Outer Bearing Race Bearing Race Cage Inner Bearing Race Step 8 Turn the front dual case adapter over and place it on a solid workbench resting on the dual case coupler. Step 9 Tap the dual case bearing (and dual case adapter) downward using a hammer. Be sure to tap gently, striking the inner bearing race ONLY. Caution: NEVER press or tap on the outer bearing race, bearing cage, or the soft aluminum dual case adapter. Step10 Evenly distribute taps around the circumference of the inner bearing race, driving the bearing down on the dual case coupler. Step 11 It will likely be necessary to use a soft punch to drive the bearing the last little bit. Strike the inner bearing race ONLY.

7 Option 2 (With a Press) Outer Bearing Race Inner Bearing Race Dual Case Coupler Dual Case Adapter Tech Tip 11 Position the front dual case adapter in a press. Select a press quality tool that is round and is small enough to contact the inner bearing race, yet large enough to fit over the dual case coupler. Press the inner bearing race until the snap ring can be installed. (See Step 12) Caution: DO NOT press against the outer bearing race, bearing cage or the aluminum dual case adapter. Step 12 Install the snap ring using snap ring pliers. Tech Tip 12 This shows the snap ring properly installed.

8 Step 13 Turn the front dual case adapter over on the work bench. Step 14 Apply some grease to the input needle bearing. Note: Be sure to place a cloth under the adapter for protection. Step 15 Install the input needle bearing inside the dual case coupler.

9 Modifying the Shifter Shaft Step 16 Mark the shifter shaft as shown. The shaft should be marked then cut about an 1/8 above the 1st groove (or a distance equal to the space between the grooves). Step 17 Using an air cut-off tool, cut the shifter folk as shown. Note: It is best to leave a little more material than you think is needed at first. You can alway grind a little more off if needed, later. Small Chamfer Step 18 Using a side grinder, smooth any rough edges or burrs, and make a chamfered edge all the way around the shaft. Tech Tip 18 This is what the shifter shaft should look like when finished.

10 Step 19 Test fit the shifter shaft by placing it in the front dual case adapter as shown. Then view the shaft though the detent ball hole as shown in the next picture. Step 20 The shifter shaft groove should be centered in the detent ball hole. Grind a little more off the end of the shifter shaft if needed. Once you are satisfied the shifter shaft fits properly, remove it and set it aside. Modifying the Shifter Fork = Shows Weld Points Step 21 Position the supplied piece of square stock as shown and weld it into place. Tech Tip 21 Weld the square stock in the locations shown.

11 Step 22 Smooth all welded surfaces using a flap disc (or Equivalent) in an air grinder. Installing the Shifter Shaft in the Shifter Fork Step 23 Place the shifter fork in a vice and install the shifter shaft as shown. Step 24 Align the roll pin with the hole in the shifter shaft. Note: Insure the notches are oriented as shown here.

12 Step 25 Drive the roll pin into place using light taps with a ball peen hammer. See next Tech Tip for proper roll pin installation. Tech Tip 25 The roll pin should be flush with the shifter fork. Installing the Shifter Shaft and Fork Assembly Step 26 Apply some grease to the shifter shaft as shown. Step 27 Apply some grease to the shifter fork top and bottom, 4 locations.

13 Step 28 Install the shifter collar in the shifter fork. Note: The shifter collar can fit two ways. It does not matter which. Step 29 Install the shifter rod, fork and collar assembly as shown. Tech Tip 29 Shifter rod, fork and collar properly installed. Step 30 Install the input gear assembly into the low range gear assembly.

14 Step 31 Install the counter gear assembly as shown. Installing the Crawl Box Case Step 32 Position the crawl box case on the work bench as shown. Note: Place a cloth on the bench for protection. Step 33 Applying some Blue Permatex Threadlocker to the SHORT treaded end of the supplied stud.

15 Step 34 Install the stud in the crawl box case with the short treaded end of the stud oriented downward. Step 35 Tighten the stud using the double nut approach. 1. Install 2 nuts on the stud 2. Hold the bottom nut and tighten the top nut 3. Snug the stud by tuning the top nut clockwise 4. Remove both nuts. Caution: These studs only need to be snug, not tight. Over tightening could damage the case.

16 Step 36 Install the other (4) studs in the same way as the first. Step 37 Turn the crawl box case over and temporarily install it on the front dual case adapter. This is simply a test to see that all parts fit properly before final assembly. Note: Be sure to align the studs and bearings as shown. DO NOT FORCE THESE PARTS TOGETHER. Step 38 Once the crawl box is in place, inspect it carefully to see that all parts fit together properly and spin freely. Once you are satisfied the parts will fit together properly, go on to the next step. Step 39 Remove the crawl box case.

17 Step 40 Clean the gasket surface with brake cleaner and a cloth. Note: Double check entire crawl box for cleanliness as well. Step 41 Install the supplied gasket as shown. Note: Do NOT use gasket sealer here. This is a dry fit gasket. Step 42 Reinstall the crawl box case back on the front dual case adapter as shown. Step 43 Install the counter gear assembly snap ring. Note: You will need to lift up on the counter gear assembly to install the snap ring.

18 Step 44 Install the snap ring on the input shaft assembly. Note: You will need to lift up on the input shaft to install this snap ring. Step 45 Start the (2) supplied (M10X1.25X40mm) bolts. Note: Be sure to include a lock washer and flat washer with each bolt. Step 46 Simply SNUG these (2) bolts for now. Not much more than finger tight. Step 47 Turn the crawl box case assembly over.

19 Step 48 Install a flat washer, lock washer and nut on all (5) studs. Tighten these nuts in a progressively tighter criss cross pattern until 29 ft. lbs. is reached. Step 49 Torque the (2) bolts you installed in Step 45 to 29 ft. lbs.

20 Tech Tip 50A To help orient the front dual case adapter with the rear dual case adapter there are alignment marks cast into each component. This picture shows the alignment marks on the front dual case adapter. They are in 10 Increments to accommodate a wide range of customer needs. Tech Tip 50B This picture shows the SINGLE alignment mark on the rear dual case adapter. This mark can be positioned on any of the degree marks on the front dual case adapter. This mark can also be aligned halfway between the degree marks (5 increments) for an even wider range of positions if desired.

21 Installing the Transfer Case Adapter Step 51 Place the rear dual case adapter on the work bench as shown. Step 52 Clean the area around the bolt holes with a good quality degreaser such a Brake Clean. Step 53 Apply a thin coat of Permatex Gear Oil RTV Gasket Maker as shown. Tech Tip 53 Apply gasket maker in the area between the red circles.

22 0 Step 54 Place the crawl box case assembly on the work bench, turn the rear dual case adapter over and position it on the front dual case adapter making sure the marks are aligned as shown in the next picture. Step 55 Alignment marks positioned on 0. Note: We used the 0 mark for our application. But you can use any one of 13 different positions (5 increments) that best fits your needs. See Tech Tip 50A and 50B. Rotating or Clocking as we call it, can give greater clearance between the rear transfer case and the ground. 0 Step 56 Insure that the rear dual case adapter and the front dual case adapter are going together evenly. This is a very snug fit. If you attempt to push these two parts together using excessive force, damage could result. Tech Tip 56 This shows the rear dual case adapter and the front dual case adapter properly fitted together and the clocking marks aligned. Note: You may choose different marks.

23 Shorter Step 57 Once the rear dual case adapter is properly positioned, turn the assembly over and insure that the holes align. There should be 6 holes that align properly. It may be necessary to rotate the adapter slightly to get the holes exactly aligned. Tech Tip 57A The bolts used in the next step are the (6) Allen Head bolts supplied in the kit. One of the 6 bolts is shorter than the rest. The short bolt is to be installed in the hole shown in the next picture. Tech Tip 57B The shorter bolt is to be installed in one of these two holes depending on which hole aligns with the front dual case hole. Step 58 Apply Blue Permatex Threadlocker to the threads of the short allen head bolts.

24 Step 59 Install the short bolt in the hole shown here. Just finger tight for now. Step 60 Install the (5) longer bolts in the same way as the short bolt. Step 61 Using a torque wrench and an 8mm allen socket, tighten these bolts in an increasingly tighter criss-cross pattern until 29 ft. lbs. is reached.

25 Coupling the Two Transfer Cases Together Step 62 Apply Blue Permatex Threadlocker to the short threaded end of a supplied stud. Step 63 Install the stud in one of the (6) holes in the rear transfer case. Step 64 Snug the stud in place using the double nut method. See Step 35 to see double nut method instructions. Step 65 Install the remaining (5) studs in the same way. Note: enough. Remember, just SNUG is

26 Step 66 Position the supplied gasket on the studs. Gasket sealer is NOT needed on this gasket. Step 67 Apply a good quality wheel bearing grease to the rear transfer case input shaft as shown. Step 68 Begin putting the two transfer cases together by aligning the studs and the input shaft. Step 69 Be sure the two components are coming together evenly. Note: Be careful not to damage the input shaft seal.

27 Step 70 Continue bringing the two components together until they come completely together. There is no need for a lot of force here. It should come together easily. If it does not, pull the components back apart and figure out what is wrong. Step 71 Once you are sure the two components will come together completely, slide the components back apart about 1/2 and install the (6) supplied flat washers, lock washers and nuts. Note: Pulling the components back apart allows space to install the nuts. Step 72 Tighten the nuts in an increasingly tighter criss-cross pattern until an estimated 29 ft. lbs. is reached. Step 73 Install the detent ball in the front dual case adapter as shown.

28 Step 74 Install the detent spring. Step 75 Install the detent plug and tighten it. Step 76 Install the supplied drain plug in the front dual case adaptor and tighten it. Note: Be sure plug has the supplied washer/gasket on in it. Step 77 Add a good quality GL-5 SAE Gear Lube in this hole (or through the shifter cavity) until it runs out of the check and fill hole. CAUTION: Unlike some other crawl boxes on the market, this one is an isolated unit. It does not share fluid with the rear transfer case. Therefore it is critical that the crawl box be filled with gear lube before being put into service. It does not matter when it is filled, either before or after it is installed in the vehicle, as long as it is filled.

29 Step 78 Then install and tighten the supplied check/fill plug. Note: Be sure the plug has the supplied gasket/washer on it. Tech Tip 78 This hole in the top of the crawl box should not be left open. Originally, it was occupied by a 4WD indicator switch. This switch could be reinstalled and left electrically disconnected or you could plug it with a plug similar to what is shown here. Either approach will work as long as it is NOT left open. Congratulations! All done. We hope these instructions were helpful. If you have suggestions on how we can improve our instructions (or products) please us at sales@inchwormgear.com

30 As always, If you experience any difficulty during the installation of this product please contact Inchworm Gear Technical Support at during working hours. Thank you for purchasing from Inchworm Gear. These instructions are designed as a general installation guide. Installation of many Inchworm Gear products require specialized skills such as metal fabrication, welding and mechanical trouble shooting. If you have any questions or are unsure about how to proceed, please contact our shop at or seek help from a competent fabricator. Using fabrication tools such as welders, torches and grinders can cause serious bodily harm and death. Please operate equipment carefully and observe proper safety procedures. Rock crawling and off-road driving are inherently dangerous activities. Some modifications will adversely affect the on-road handling characteristics of your vehicle. All products sold by Inchworm Gear are sold for off road use only. Any other use or application is the responsibility of the purchaser and/or user. Some modifications and installation of certain aftermarket parts may under certain circumstances void your original dealer warranty. Modification of your vehicle may create dangerous conditions, which could cause roll-overs resulting in serious bodily injury or death. Buyers and users of these products hereby expressly assume all risks associated with any such modifications and use. Revised Copyright 2016 Low Range Off-Road, LC All Rights

Installation Instructions

Installation Instructions Instructions Created by an: Inchworm Tacoma Dual Case Adapter Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools

More information

Suzuki Samurai Full Time 4WD Drive Flange Kit (SKU# SAX-DF)

Suzuki Samurai Full Time 4WD Drive Flange Kit (SKU# SAX-DF) Instructions Created by an: Suzuki Samurai Full Time 4WD Drive Flange Kit (SKU# SAX-DF) We recommend that you consider replacing the hub bolts when installing this kit. Click HERE for more info. CAUTION:

More information

Installation Instructions

Installation Instructions Instructions Created by an: Suzuki Samurai Door-less Mirror and Light Mount by Low Range Off-Road (SKU# SEB-LR-DMB) Installation Instructions CAUTION: Safety glasses should be worn at all times when working

More information

Installation Instructions

Installation Instructions Steering kit for Samurai Cross Over Steering Kits (SKU# SST-SSOTS) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and equipment.

More information

Suzuki Samurai 6.5 Transfer Case Gear Kit, KIT

Suzuki Samurai 6.5 Transfer Case Gear Kit, KIT Suzuki Samurai 6.5 Transfer Case Gear Kit, 105004-3-KIT Kit Contents: Gear, 26 Spline/26 Tooth 1.0 Gear, 44 Tooth 1.0 Gear, 58 Tooth/23 Tooth 1.0 Gear, 67 Tooth/ 27 Tooth 1.0 Counter Shaft 1.0 Counter

More information

Suzuki Samurai Coated Stainless Steel Braided Brake Lines (SKU# SB-BL) Installation Instructions

Suzuki Samurai Coated Stainless Steel Braided Brake Lines (SKU# SB-BL) Installation Instructions Suzuki Samurai Coated Stainless Steel Braided Brake Lines (SKU# SB-BL) Installation Instructions SUZUKI SAMURAI FRONT BRAKE LINES SUZUKI SAMURAI REAR BRAKE LINES Notice: After completing this installation

More information

Installation Instructions

Installation Instructions Instructions Created by an: 2005+ Toyota Tacoma BTB Front Coilovers by Low Range Off Road SKU# TAC-SP-05CO-BTB-650 Diff Drop Kit (SKU# LR-2GDDK) Instructions included Installation Instructions Revised

More information

Trail-Creeper Dual Transfer Case Adapter

Trail-Creeper Dual Transfer Case Adapter Trail-Creeper Dual Transfer Case Adapter Installation Instructions For Kits: 100001-1-KIT 21 Spline 100006-1-KIT 23 Spline KIT Contents: 23 or 21 Spline Coupler 1.0 Adapter Plate w/ Bearings Installed

More information

Installation Instructions

Installation Instructions Instructions Created by an: 2007-Present Toyota Tundra LRT Leveling Lift Kit - 4WD by Low Range Off-Road (SKU# LR-LRTundra) Instructions also apply to 2WD Kits. Installation Instructions Revised 7-11-17

More information

Installation Instructions

Installation Instructions Instructions Created by an: 1986-1995 Toyota Pickup 4Runner Hilux Front Ball Joint Spacer Kit - 2.5" 64mm Lift by Low Range Off-Road (SKU# TSP-BJS-1.5 & TSP-BJS-1.5-W/Shocks) Installation Instructions

More information

Installation Instructions

Installation Instructions Instructions Created by an: Suzuki Samurai Roof Rack Kit for Hard Top, Tin Top by Low Range Off Road (SKU# SEB-RRTT) Installation Instructions CAUTION: Safety glasses should be worn at all times when working

More information

Installation Instructions

Installation Instructions Instructions Created by an: Revised 7-11-17 LRT 2005-2017 3/1 Leveling/ Lift Kit for Toyota Tacoma by Low Range Off-Road (SKU# LR-LRTACO) Installation Instructions Suggested Tools: CAUTION: Safety glasses

More information

Toyota Tundra Sequoia Differential Drop Kit by Low Range Off-Road (SKU# LR-TUNDDK)

Toyota Tundra Sequoia Differential Drop Kit by Low Range Off-Road (SKU# LR-TUNDDK) Instructions Created by an: 2007-2015 Toyota Tundra 2008-2015 Sequoia Differential Drop Kit by Low Range Off-Road (SKU# LR-TUNDDK) CAUTION: Safety glasses should be worn at all times when working with

More information

Installation Instructions

Installation Instructions 86-89 Suzuki Samurai Pedal Rebuild Kit SKU# SIB-PRB! Instructions also includes clutch adjustment procedures. Installation Instructions W e a l s o s u p p l y replacement peddle pads. Click HERE for more

More information

Installation Instructions

Installation Instructions Instructions Created by an: Mini Spool for Samurai, Sidekick, Tracker, 26 Spline, Yukon (SKU# SAX-MS-YUK) Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times

More information

Installation Instructions

Installation Instructions Suzuki Samurai 26 Spline Lockright Locker w/o Couplers (SKU# SAX-1510) Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when working with vehicles and related

More information

Installation Instructions

Installation Instructions Instructions Created by an: Suzuki Samurai 1.3L Replacement Throttle Cable (SKU# SER-THC) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related

More information

Installation Instructions

Installation Instructions 86-95 Suzuki Samurai Replacement U-bolts, Stock and Extended Length (SKU# SSP-UB) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools

More information

Suzuki Samurai to Toyota Front Spring Swap Kit, with Missing Link Shackles (SKU#SSP-TSFM) Installation Instructions

Suzuki Samurai to Toyota Front Spring Swap Kit, with Missing Link Shackles (SKU#SSP-TSFM) Installation Instructions Suzuki Samurai to Toyota Front Spring Swap Kit, with Missing Link Shackles (SKU#SSP-TSFM) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related

More information

Installation Instructions

Installation Instructions ) Instructions Created by an: Suzuki Sidekick / Tracker "Game Changer" 4 Speed Auto to Toyota T-Case Adapter Kit (SKU# KTC-GC-21, KTC-GC-23) Installation Instructions Suggested Tools: CAUTION: Safety glasses

More information

Installation Instructions

Installation Instructions Instructions Created by an: Suzuki Samurai Replacement Clutch (SKU# STM-CC) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and

More information

Installation Instructions

Installation Instructions Instructions Created by an: Suzuki Sidekick / Tracker / X90 / Vitara / Grand Vitara Defiant Armor Differential Guard (SKU# KAR-DG) Installation Instructions CAUTION: Safety glasses should be worn at all

More information

Toyota V6 Adapter Plate, KIT

Toyota V6 Adapter Plate, KIT Toyota V6 Adapter Plate, 100086-1-KIT KIT Contents: 100086-1 Dual Adapter, V6 88-95 1.0 100088-1 Coupler, V6 23S-23S 1.0 100089-1 Bolt, M10-1.25x35 6.0 100091-1 Bolt, M10-1.25x30 Flat Head Allen Bolt 2.0

More information

Installation Instructions

Installation Instructions 86-95 Suzuki Samurai HD Transfer Case Mount (SKU# STC-EOS) Revised 4/11/14 Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when working with vehicles and

More information

LOW RANGE OFF-ROAD Suzuki Samurai Venturi Vent Tube Nozzle (SKU# SER-VENT) Installation Instructions

LOW RANGE OFF-ROAD Suzuki Samurai Venturi Vent Tube Nozzle (SKU# SER-VENT) Installation Instructions 86-88 Suzuki Samurai Venturi Vent Tube Nozzle (SKU# SER-VENT) Installation Instructions For a video of this procedure click HERE, or go to our web site. Suggested Tools: CAUTION: Safety glasses should

More information

Installation Instructions

Installation Instructions 86-95 Suzuki Samurai Rear Wheel Bearing Kit (SKU# SAX-RWB) Instructions also include:! Rear Hub Bolt Kit!!!! (SKU# SAX-AS)!! SJ410 Backing Plate!!!! (SKU# SAX-410)! SJ413 Rear Drum Brake Hardware Kit!

More information

Installation Instructions

Installation Instructions Suzuki Samurai 1 Inch and 2 Inch Body Lift Kit (SKU# SSP-BL) Installation Instructions Background: These instructions are designed for installing the 2 body lift. Our approach is to raise the entire body

More information

Installation Instructions

Installation Instructions Instructions Created by an: Samurai Rear Diamond Plate Corners (Pre-bent) (SKU# SEB-RDP) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related

More information

Installation Instructions

Installation Instructions 86-95 Suzuki Samurai Corbeau Safari Fold And Tumble Rear Seat Bracket Seat Kit (SKU# SIB-RSBR) Instructions also Include:! SKU# CS-SAF Corbeau Safari Reclining Fold & Tumble Bench Seat!!!!! SKU# CS-2SB-LB

More information

Installation Instructions

Installation Instructions Instructions Created by an: DIY Alignment Toe Set Tool, 5 Patterns (SKU# DIY-TST) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools

More information

Installation Instructions

Installation Instructions Instructions Created by an: 86-95 Suzuki Samurai Samurai Front Axle Knuckle Rebuild Kits (SKU# SAX-KRK) Installation Instructions Revised 6-6-14 Suggested Tools: CAUTION: Safety glasses should be worn

More information

Installation Instructions

Installation Instructions 86-95 Low Range Off Road Universal Front Shock Tower Kit for Suzuki Samurai (SKU# SSP-UST) Installation Instructions Revised 10/29/13 Suggested Tools: CAUTION: Safety glasses should be worn at all times

More information

Installation Instructions

Installation Instructions 2003-Present Toyota 4Runner 2007-2014 FJ Cruiser LRT 3" Lift Kit by Low Range Off-Road (SKU# LR-LRFJ4RU) Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when

More information

Installation Instructions

Installation Instructions Instructions Created by an: 86-95 Suzuki Samurai Samurai Complete Transmission Rebuild Kit with Synchronizers (SKU# STM-RP) Installation Instructions Part I Notice: If there are any parts you need that

More information

Installation Instructions

Installation Instructions 86-95 Suzuki Samurai Heater Water Control Valve Wire Cable (SKU# SIB-HCVW) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and

More information

Installation Instructions

Installation Instructions Instructions Created by an: DIY Underhood LED Lighting Kit (SKU# DIY-E-UHLK) Installation Instructions NOTICE: This Under Hood Light Kit was installed on a 2002 Toyota Tacoma. However, these instructions

More information

Installation Instructions

Installation Instructions Suzuki Samurai Rear Disk Brake Kits by Low Range Off Road (SKU# SB-LRD) Also included in the instructions are:!!! SB-LRDB Suzuki Samurai Disk Brake Bracket Kit by Low Range Off Road!!! SB-LRDB-FK-1 Suzuki

More information

Installation Instructions

Installation Instructions 86-95 Suzuki Samurai Front Shackle (SKU# SSP-HDS1) Note: These instructions also apply to SKU# SSP-HDS3 Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at all times when

More information

Installation Instructions

Installation Instructions 86-88 Suzuki Samurai Heater Control Valve (SKU# SER-HCV) Installation Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and equipment. Suggested

More information

Low Range HD 2 Inch Body Lift Kit (Sidekick, GV, Vitara, Tracker, X90) SKU# KSP-BL2

Low Range HD 2 Inch Body Lift Kit (Sidekick, GV, Vitara, Tracker, X90) SKU# KSP-BL2 Low Range HD 2 Inch Body Lift Kit (Sidekick, GV, Vitara, Tracker, X90) SKU# KSP-BL2 Installation Instructions Background: These instructions are designed for installing the 2 body lift. They can also be

More information

Installation Instructions

Installation Instructions 2003-Present Toyota 4Runner 2007-2014 FJ Cruiser 1.5" Rear Coil Spring Spacers by Low Range Off-Road (SKU# LR-FJ4RRS) Installation Instructions Suggested Tools: CAUTION: Safety glasses should be worn at

More information

Installation Instructions

Installation Instructions 86-95 Suzuki Samurai Hood Latch & Release Cable (SKU# SEB- HLCK) Installation Instructions Note: S u z u k i h a s upgraded both of these parts and they will not work with the hood latches and release

More information

Instructions Suzuki Samurai Brake System Bleeding. Suggested Tools:

Instructions Suzuki Samurai Brake System Bleeding. Suggested Tools: 86-95 Suzuki Samurai Brake System Bleeding Instructions CAUTION: Safety glasses should be worn at all times when working with vehicles and related tools and equipment. Suggested Tools: Brake Fluid, DOT

More information

86-95 Suzuki Samurai Complete Contact Spring Over Axle Pads (SKU# SSP-CCSP4) Installation Instructions

86-95 Suzuki Samurai Complete Contact Spring Over Axle Pads (SKU# SSP-CCSP4) Installation Instructions 86-95 Suzuki Samurai Complete Contact Spring Over Axle Pads (SKU# SSP-CCSP4) Installation Instructions Revised 4/17/18 Front Pads (SSP-CCFP) Rear Pads (SSP-CCRP) Suggested Tools: CAUTION: Safety glasses

More information

Installation Instructions

Installation Instructions 99-04 Suzuki Sidekick 2 Inch Budget Lift Kit Also fits 99-04 Tracker, Vitara, Grand Vitara or XL-7 Instructions Include:! SKU# KSP-BLKV Basic Kit!!!! SKU# KSP-C2BLKV-RS Basic Kit W/Rear Shocks!!!! SKU#

More information

IFS Eliminator Kit,

IFS Eliminator Kit, IFS Eliminator Kit, 110001-1 IFS Eliminator Kit Contents: Front Leaf Springs (choice 3", 4", or 5") 1.0 High Steer Crossover Steering Kit 1.0 Frame Tube Jig Kit 1.0 Steering Stabilizer Kit 1.0 U-bolt Flip

More information

kit (17% High Range Reduction, 87% Low Range Reduction)

kit (17% High Range Reduction, 87% Low Range Reduction) InstalL Instructions suzuki jimny electric/push-button transfer Case gears 304088-3-kit (17% High Range Reduction, 87% Low Range Reduction) kit contents INCLUDED NOTE: If your Jimny has an automatic transmission,

More information

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Page 1 Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage

More information

InstalL Instructions. trail-creeper 4.70 transfer case gear kit ( KIT and KIT) kit contents

InstalL Instructions. trail-creeper 4.70 transfer case gear kit ( KIT and KIT) kit contents InstalL Instructions trail-creeper 4.70 transfer case gear kit (105000-1-KIT and 105001-1-KIT) kit contents 5356 PINE AVE FRESNO, CA 93727 USA TOLL FREE: 877.4X4.TOYS WORLDWIDE: 559.252.4950 WWW.TRAIL-GEAR.COM

More information

InstalLation Instructions

InstalLation Instructions InstalLation Instructions Trail-Creeper tacoma dual transfer case adapter Kit 107530-1-kit 107531-1-kit Kit Contents 111111111262525- (1995-2004 toyota tacoma 4wd, 2.7L manual) (1995-2004 toyota tacoma

More information

Installation Manual TWM Performance Kia Forte Short Shifter

Installation Manual TWM Performance Kia Forte Short Shifter Installation Manual TWM Performance Kia Forte 2009+ Short Shifter Begin the installation by parking on a flat surface, as you will have to engage and disengage the hand brake and shift from gears to neutral.

More information

InstalL Instructions. fj40 knuckle conversion kit. kit contents

InstalL Instructions. fj40 knuckle conversion kit. kit contents InstalL Instructions fj40 knuckle conversion kit 1960-1983 toyota fj40 1960-1983 toyota fj45 304149-1-kit 304150-1-kit 304151-1-kit 304152-1-kit 304153-1-kit 304154-1-kit 304155-1-kit 304156-1-kit 304157-1-kit

More information

Installation Manual TWM Performance Short Shifter Nissan 350Z, 370Z Infiniti G35, G37

Installation Manual TWM Performance Short Shifter Nissan 350Z, 370Z Infiniti G35, G37 Installation Manual TWM Performance Short Shifter Nissan 350Z, 370Z Infiniti G35, G37 It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift from

More information

MODEL 300 FLIP KIT - PARTS LIST

MODEL 300 FLIP KIT - PARTS LIST MODEL 300 FLIP KIT - PARTS LIST SHIFTER PLATE 1 EA REAR SHIFT RAIL 1 EA FRONT SHIFT RAIL 1 EA SHIFT RAIL COVER 1 EA SHIFTER ASSEMBLY 1 EA BRASS PIPE PLUGS 5 EA REAR OUTPUT SHIFT FORK 1 EA SHIFT FORK PADS

More information

Max IV Rear Axle Replacement For models after Serial Number and all rear splined axle replacements.

Max IV Rear Axle Replacement For models after Serial Number and all rear splined axle replacements. Max IV Rear Axle Replacement For models after Serial Number 19089 and all rear splined axle replacements. 10/8/03 Max IV Snap Ring Rear Axle replacement.doc Tools required: 9/16 Wrench 6 Extension Steel

More information

InstalLation Instructions

InstalLation Instructions Trail-Creeper tacoma dual transfer case adapter Kit 107523-1-KIT Kit Contents 111111111262525- Coupler Adapter Plate w/bearings installed Bearing Spacer Snap Ring Washer, Flat M10 Washer, Lock M10 Washer,

More information

Installation Manual TWM Performance Honda Accord 2008+

Installation Manual TWM Performance Honda Accord 2008+ Installation Manual TWM Performance Honda Accord 2008+ Begin the installation by parking on a flat surface, as you will have to engage and disengage the hand brake and shift from gears to neutral. If you

More information

$1.00 FOR THE TQIO/RCIO

$1.00 FOR THE TQIO/RCIO $1.00 FOR THE TQIO/RCIO m mm HDBBYSHOP Champion Jay Halsey has an impressive track record. One of Jay's advantages is a whisper smooth tranny thanks to his dad, Jim. Now you can build a Halsey transmission!

More information

Installation Manual TWM Performance Short Shifter 2008 Mitsubishi Lancer

Installation Manual TWM Performance Short Shifter 2008 Mitsubishi Lancer Page 1 Installation Manual TWM Performance Short Shifter 2008 Mitsubishi Lancer Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift

More information

Installation Manual TWM Performance Short Shifter Subaru STi 2008+

Installation Manual TWM Performance Short Shifter Subaru STi 2008+ - 1 - Installation Manual TWM Performance Short Shifter Subaru STi 2008+ Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift from

More information

Installation Manual TWM Performance Short Shift Kit Estimated Installation Time: Tools required:

Installation Manual TWM Performance Short Shift Kit Estimated Installation Time: Tools required: Page 1 Installation Manual TWM Performance Short Shift Kit 1993-2001 Nissan Altima 1991-2001 Infiniti G20 1991-2001 Nissan Sentra- 200SX 1991-1993 Nissan NX 1986-1989 Nissan Stanza 1995-2001 Nissan Maxima

More information

Installation Manual TWM Performance Short throw shifter 2001 and up Hyundai Accent

Installation Manual TWM Performance Short throw shifter 2001 and up Hyundai Accent Installation Manual TWM Performance Short throw shifter 2001 and up Hyundai Accent 1. Place the vehicle on a flat surface with blocks in front and behind the wheels preventing unwanted movement. The car

More information

Rekluse Motor Sports, Inc. The z-start Clutch. Husaberg ( )

Rekluse Motor Sports, Inc. The z-start Clutch. Husaberg ( ) Rekluse Motor Sports, Inc. The z-start Clutch Husaberg (1989-2003) Installation Guide Copyright 2002-2004 Rekluse Motor Sports z-start Revision 3.000 RMS125 Husaberg 89-03 191-225 Manual Revision: 012805

More information

CALIFORNIA TRIMMER MOWER MAINTENANCE MANUAL

CALIFORNIA TRIMMER MOWER MAINTENANCE MANUAL CALIFORNIA TRIMMER MOWER MAINTENANCE MANUAL 2 Table of Contents Section 1: General Information Page Handle Assembly Instructions 4 Maintenance All Models 6 Oil Change Procedures All Models 9 Height Adjustment

More information

Maintenance Information

Maintenance Information 16572679 Edition 2 May 2014 Air Drill QP Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially

More information

UNDERDOG RACING DEVELOPMENT URD Traction Bar Installation

UNDERDOG RACING DEVELOPMENT  URD Traction Bar Installation URD Traction Bar Installation Introduction: UNDERDOG RACING DEVELOPMENT Thank you for choosing the URD Traction Bar for two wheel drive street trucks. More models coming soon! This bar is a true bolt on

More information

95-97 Toyota Tercel & Paseo Short Throw Shifter Installation Manual

95-97 Toyota Tercel & Paseo Short Throw Shifter Installation Manual 95-97 Toyota Tercel & 92-97 Paseo Short Throw Shifter Installation Manual Estimated Installation Time: 40-60 Minutes Tools Required: -Philips head screwdriver and flat head screwdriver -Bench vise -10mm,

More information

Installation Manual TWM Performance Short Shifter Subaru Forester up to 2005

Installation Manual TWM Performance Short Shifter Subaru Forester up to 2005 - 1 - Installation Manual TWM Performance Short Shifter Subaru Forester up to 2005 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake and shift

More information

Installation Manual TWM Performance Short Shift Kit Stage 1 and Stage 2 MazdaSpeed 6

Installation Manual TWM Performance Short Shift Kit Stage 1 and Stage 2 MazdaSpeed 6 Page 1 Installation Manual TWM Performance Short Shift Kit Stage 1 and Stage 2 MazdaSpeed 6 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage the hand brake

More information

INSTALLATION GUIDE CRF150R Manual Revision:

INSTALLATION GUIDE CRF150R Manual Revision: REKLUSE MOTOR SPORTS The z-start Pro Clutch INSTALLATION GUIDE CRF150R 191-810 Manual Revision: 032508 2002 Rekluse Motor Sports Rekluse Motor Sports, Inc. 110 E. 43rd Street Boise, Idaho 83714 208-426-0659

More information

Sachs shock manual. ( ) 2 & 4 Stroke RR Enduro. ( ) RS Dual Sport

Sachs shock manual. ( ) 2 & 4 Stroke RR Enduro. ( ) RS Dual Sport Sachs shock manual (2013 2015) 2 & 4 Stroke RR Enduro (2014-2015) RS Dual Sport 1 Introduction The procedures in this manual must take place in a clean environment using professional tools and some specific,

More information

IPSCO STS (Short Throw Shifter) Installation Instructions Dodge Viper WARNING

IPSCO STS (Short Throw Shifter) Installation Instructions Dodge Viper WARNING WARNING Modification of your vehicle with the parts identified above may alter its stock performance; the buyer hereby expressly assumes all risks associated with any such modification. DISCLAIMER OF WARRANTY

More information

SUZUKI SQ 416/420/625 M.Y TRANSMISSION SERVICE MANUAL - MANUAL - AUTOMATIC - TRANSFER - DIFFERENTIALS

SUZUKI SQ 416/420/625 M.Y TRANSMISSION SERVICE MANUAL - MANUAL - AUTOMATIC - TRANSFER - DIFFERENTIALS SUZUKI SQ 416/420/625 M.Y 1998-2005 TRANSMISSION SERVICE MANUAL - MANUAL - AUTOMATIC - TRANSFER - DIFFERENTIALS WARNING/CAUTION/NOTE IMPORTANT Please read this manual and follow its instructions carefully.

More information

Installation Manual TWM Performance Short Shift Kit 2006 and up Toyota Yaris

Installation Manual TWM Performance Short Shift Kit 2006 and up Toyota Yaris Installation Manual TWM Performance Short Shift Kit 2006 and up Toyota Yaris 1. Unscrew the shift knob by rotating counter clockwise. 2. Remove the carpet or mat at the bottom of the cup holder at the

More information

- INSTALLATION INSTRUCTIONS -

- INSTALLATION INSTRUCTIONS - APPLICATION(S): RXT-X / RXT / GTX-SC Pump Extension Kit (+50mm) PART# - RS33085-PEK-50 Required tools Part# Drive Shaft Holder Tool 529 035 986 PTO Seal Support Tool 529 035 842 Floating Ring Tool 529

More information

HASPORT PERFORMANCE EFH1

HASPORT PERFORMANCE EFH1 HASPORT PERFORMANCE Installation Instructions For: Part Number EFH1 1988-1991 Honda Civic/CRX Hasport Performance mounts are the result of extensive research and engineering. All mounts are designed with

More information

Installation Instructions

Installation Instructions Installation Instructions Product: SwitchBlade Swaybar System Part Number: PN 9100 Application: Jeep Wrangler TJ, 1997-06 (front) Welcome CONGRATULATIONS on purchasing a SwitchBlade Swaybar System from

More information

Installation Manual TWM Performance Toyota GT86 / Scion FRS / Subaru BRZ Direct Replacement Short Shifter

Installation Manual TWM Performance Toyota GT86 / Scion FRS / Subaru BRZ Direct Replacement Short Shifter Installation Manual TWM Performance Toyota GT86 / Scion FRS / Subaru BRZ Direct Replacement Short Shifter Begin the installation by parking on a flat surface, place wooden blocks in front or behind the

More information

WARNING: Only perform this installation if you are experienced, fully equipped mechanic.

WARNING: Only perform this installation if you are experienced, fully equipped mechanic. DYNATRAC V3.2 2005-Present Ford Super Duty 250/350-4x4, Front Axle, Free Spin Conversion Kit Some of the less common tools, which will be required: 6 point Spanner socket (OTC #7090-A or equivalent). These

More information

Installation Instructions

Installation Instructions Parts Installation Instructions DESCRIPTION PART # QTY A Alignment Tab PN ESB101 1 B Drill Guide PN ESB102 1 C Actuator Cable Assembly PN ESB103 1 C1 72 Actuator Cable 1 C2 5/16 Jam Nut 1 C3 Star Washer

More information

DYNATRAC PRODUCTS V5.3

DYNATRAC PRODUCTS V5.3 DYNATRAC PRODUCTS V5.3 2000-2008 Dodge Hub Kit Stage 1 4x4, Front Axle Free Spin Conversion Kit Note: This Kit is not Approved for 2007 & up 3500 Cab and Chassis Trucks Due to a Larger U-Joint (If U-Joint

More information

GEN-3 Super-duty Supercharger Shaft Kit PART# - RY17040-UK-6S5-3

GEN-3 Super-duty Supercharger Shaft Kit PART# - RY17040-UK-6S5-3 GEN-3 Super-duty Supercharger Shaft Kit PART# - RY17040-UK-6S5-3 We strongly recommend the use of a service manual to familiarize yourself with the various components and procedures involved with this

More information

TRANSMISSION 6.7 GENERAL HOME. See Figure The transmission is a five-speed constantmesh type housed in an extension of the crankcase.

TRANSMISSION 6.7 GENERAL HOME. See Figure The transmission is a five-speed constantmesh type housed in an extension of the crankcase. TRANSMISSION 6.7 GENERAL See Figure 6-46. The transmission is a five-speed constantmesh type housed in an extension of the crankcase. b06x6x Neutral st Gear Mainshaft Mainshaft 4 5 4 5 Countershaft Out

More information

RHINO SUSPENSION SYSTEM INSTALLATION INSTRUCTIONS

RHINO SUSPENSION SYSTEM INSTALLATION INSTRUCTIONS PARTS INCLUDED: 2 FRONT UPPER A-ARMS 2 FRONT LOWER A-ARMS 2 UNI-BALL JOINTS 2 UNI-BALL JOINT STUDS 2 UNI-BALL JOINT CAPS 2 RETAINING RINGS 1 FRONT SHOCK ASSEM. 2 DELRON STEERING STOPS 2 SHOCK MOUNT SPACERS

More information

Installation Instructions

Installation Instructions Preparing your vehicle to install your brake system upgrade 1. Rack the vehicle. 2. If you don t have a rack, then you must take extra safety precautions. 3. Choose a firmly packed and level ground to

More information

Powerglide Automatic Floor Mount Shifter Installation Instructions

Powerglide Automatic Floor Mount Shifter Installation Instructions Powerglide Automatic Mount Installation Instructions Building American Quality With A Lifetime Warranty! TOLL FREE 1-877-469-7440 (865) 966-2269 FAX (865) 671-1999 tech@lokar.com www.lokar.com Powerglide

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Product: Switchblade Swaybar System Part Number: JKS9100 INSTALLATION INSTRUCTIONS Applications: Wrangler TJ, 1997-06 (front) 517-278-1226 tech@jksmfg.com www.jksmfg.com 491 W. Garfield Avenue, Coldwater,

More information

TRANSMISSION 6.7 GENERAL HOME. See Figure The transmission is a five-speed constantmesh type housed in an extension of the crankcase.

TRANSMISSION 6.7 GENERAL HOME. See Figure The transmission is a five-speed constantmesh type housed in an extension of the crankcase. TRANSMISSION 6.7 GENERAL See Figure 6-45. The transmission is a five-speed constantmesh type housed in an extension of the crankcase. Mainshaft Neutral Mainshaft st Gear b06x6x Countershaft 4 Out 5 Countershaft

More information

Exhaust System and Catalytic Converter Dis-Assembly

Exhaust System and Catalytic Converter Dis-Assembly Installation Guidelines For Audi-VW ZF 5-Speed Automatic Transmission Output Flange Seal! CAUTION! Performing work on your automobile without having proper knowledge, mechanical ability or the proper tools

More information

Instructions to Install TWM Performance Toyota Celica Turbo 4WD Short Throw Shift Kit

Instructions to Install TWM Performance Toyota Celica Turbo 4WD Short Throw Shift Kit Instructions to Install TWM Performance 1990-1991 Toyota Celica Turbo 4WD Short Throw Shift Kit Page 1 Step 1: Unscrew shift knob and remove console piece with boot. Step 2: Unbolt the seven bolts circled

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC4001, RC4001X Applications: Mopar 7.25, 8.25, 9.25 Axles Thank you for choosing Leed Brakes for your automotive product needs. Before you

More information

Subaru 5-Speed Double Adjustable Short Throw Shifter

Subaru 5-Speed Double Adjustable Short Throw Shifter Subaru 5-Speed Double Adjustable Short Throw Shifter 1999+ Subaru Impreza 5-Speed 2004-2005 Subaru Forester XT 5-Speed Congratulations on your purchase of the COBB Tuning Double Adjustable Short Throw

More information

Torqueflite Trans-Scat Kit

Torqueflite Trans-Scat Kit TCI 220000 Torqueflite Trans-Scat Kit This kit can be installed in a few hours by carefully following directions. Read all instructions first to familiarize yourself with the parts and procedures. Work

More information

Installation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog#

Installation Instructions COMPETITION/PLUS SHIFTER Ford Mustang MT82 6-Speed Manual Transmission Catalog# Installation Instructions COMPETITION/PLUS SHIFTER 2015-2017 Ford Mustang MT82 6-Speed Manual Transmission Catalog# 3916037 Rev. 00 WORK SAFELY! For maximum safety, perform this installation on a clean,

More information

VW & Audi TDI CR140 ECO KIT Installation Guide

VW & Audi TDI CR140 ECO KIT Installation Guide VW & Audi TDI CR140 ECO KIT Installation Guide This guide is to help you install your new Rawtek DPF, EGR & Adblue Delete Exhaust ECO Kit on your (2009-2014) VW / Audi with 2.0l CR140 Diesel Engine. Note:

More information

TCI Trans-Scat

TCI Trans-Scat Page 1 of 5 Return to Instruction Sheet index TCI 400000 Trans-Scat Turbo Hydramatic 400-1965-Up This kit will allow you to re-program your transmission valve body. This kit will give you firm positive

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC2001, RC2001X Applications: Mopar 8-3/4 & 9-3/4 Rear Axles Thank you for choosing Leed Brakes for your automotive product needs. Before

More information

2001 Dodge RAM 3500 PICKUP

2001 Dodge RAM 3500 PICKUP 1 of 76 9/14/2012 7:02 PM 2001 Dodge RAM 3500 PICKUP Submodel: Engine Type: L6 Liters: 5.9 Fuel Delivery: FI Fuel: DIESEL Subarticles MANUAL- NV3500 - DISASSEMBLY MANUAL- NV3500 - DISASSEMBLY MANUAL -

More information

Rekluse Motor Sports. The z-start Clutch. Cannondale

Rekluse Motor Sports. The z-start Clutch. Cannondale Rekluse Motor Sports The z-start Clutch Cannondale Installation Guide Copyright 2002-2004 Rekluse Motor Sports z-start Revision 3.000 RMS105 Cannondale 191-205 Manual Revision: 091304 Rekluse Motor Sports,

More information

Rekluse Motor Sports. The z-start Clutch GAS GAS. 200, 250, and strokes. 400 and strokes

Rekluse Motor Sports. The z-start Clutch GAS GAS. 200, 250, and strokes. 400 and strokes Rekluse Motor Sports The z-start Clutch GAS GAS 200, 250, and 300 2-strokes 400 and 450 4-strokes Installation Guide Copyright 2002-2004 Rekluse Motor Sports z-start Revision 3.000 RMS100 Gas Gas z-start

More information