TABLE OF CONTENTS. (8) Delayed Egress Locks & Exit Devices. (1) Documentation. (9) Electric Strikes. (10) Power Supplies & Door Control Modules

Transcription

1

2 TABLE OF CONTENTS () Documentation (8) Delayed Egress Locks & Exit Devices Online System Wizard & Product Manager i--vi Warranty Sales Policy System Design & Engineering Policy Locking Systems Reference Drawings Basic Component Considerations Communicating Bathroom Interlock - Both doors normally unlocked Mantrap - Both doors normally locked Mantrap - door locked door unlocked Elevator Lobby Door System () Stand Alone Access Controls 97, 9, 98 Keypads Vandal Res. & Weatherized Keypads Prox & Keypad Reader () Stand Alone & PC Based Locksets E7 Civic Digital Cylindrical Lockset E7 EntryCheck Prox/PIN Cylindrical Lockset.. 0 E7 EntryCheck Prox/PIN Mortise Lockset E7 EntryCheck Prox/PIN Exit Device Interface.. () PC Based Access Control E Card Access System , () Electrified & Actuator Controlled Locksets PTH Power Transfer Hinge DF Door Core Drill Kit Cylindrical Lockset SELECTRIC Mortise Lockset ,7 700 HiTower Actuator Controlled Lockset... 8,9 () Electric Bolt Locks 0, 0, 0, 0 Mortise Bolt Locks A, 9A, 90A, 090A, PB090A Narrow Mortise Bolt Locks , 80 Surface Bolt Locks Cabinet Lock GL0A, GL0A Gate Locks , 70, 80 EMLock , Mounting Kits, Architectural Housings Installation Tools Universal & Concrete Mounting Brackets AR Armature Mounting Bracket Filler Plates, Angle Brackets Gate EMLock Micro EMLock Mortise EMLock ,,, Hi/Shear EMLock S, TJ, SC Hi/Shear EMLock S/T Exit Check, Integrated , 8S Mini Exit Check, Integrated V Exit Check, Wall Mount Exit Check Exit Device ,7 Delayed Egress Accessories Remote Controls & Annunciators (9) Electric Strikes 0 Electric Strike & 70 Electric Strike (0) Power Supplies & Door Control Modules 00 Power Supplies Door Control Modules AC Transformers Power Supply Lock Capacity Chart , () Key & Exit Switches 700, 800 Key Switches Exit Switches ,9 () Exit Sense Bars & REX Kits PSB0 Sure Exit Sense Bar MSB0 REX Bar Series Exit Device REX Switch Kits () Accessories 9 Break Glass Emergency Release Under Desk Switch Wall Mount LED Plate Communicating Bathroom Controls TD Mini Timer PT, PTH Power Transfer Devices MD- PIR Request-To-Exit DPS, MC Door Status Switches () Control Consoles DT, TCC, RCC Control Consoles (7) Electromagnetic Locks Some products in this price book are protected by one or more of the following U.S. Patents. Foreign Patents are not shown.,0,0,099,7,9,,09,90,,78,,8,,,,87,8,,98,8,000,97,00,7,0,779,,7,7,90,9,99,,880,,8,87,07,,,,7

3 Online System Design Wizard and Product Manager SDC has created the most advanced manufacturers website in the industry. SDC customers and industry professionals can not only specify products and create systems, but also have the ability to save, manage, modify, quote and share product and access control system information with other professionals System Design Wizard Model Number Generator Automated Pricing Product Manager Save Multiple Project Folders Online Organize Subfolders by Door Opening Automated Document Retrieval Temporary Folder to Sort by Product Type or Door Opening Generate and Send Quotes Generate and Send Request-For-Quote Share and Download Project Reports Share and Download Project Documents Share and Download Project Quotes i

4 Online Project Manager From the System Wizard, save individual products directly into Product Manager. From the Temporary Folder, save multiple products into Product Manager Product Documents are automatically saved into the Project Manager with the product specifications Saved documents include: Datasheets Installation Instructions Templates Price List Page Project Manager Tools includes Project Organizer Reports, RFQ and Quote Generator Project Packet Generator Project Organizer Similar to a computer filing system, users can create new folders and move, copy, modify and delete folders Organize projects and sub-folders by: Building Location Door Opening Product Type ii

5 Online Request - for - Quote - Generator System Integrators, installing dealers and contractors may generate and send RFQ's directly to SDC Distributors To open RFQ's Documents: Select the Project for which you desire to request dis tributor pricing Select a document icon to generate a Flat or Structured RFQ and send an link to a distributor iii

6 Online Request - for - Quote - is generated and sent to distributor Send Report Button Preparer enters contact information, job name or ID Other manufacturers products and list prices may be added manually Send RFQ Button Download PDF Button List price, Extended List Price and Total View HTML Button Save to Project Folder Button iv

7 Distributor Quotes and RFQ Response The Distributor may download the RFQ to his own Project Manager and enter pricing and return the RFQ back to the sender. The Distributor may generate quotations and reports for his own use from Project Manager The distributors quotation page contains all the functions viewed on the previous quotation slide Plus, SDC distributors have the ability to revise factory list prices by manually entering his Net Wholse Prices, which are then automatically extended and totaled Send Report Button Download PDF Button Save to Project Folder Button The distributors quotation is then ready to be sent to his customer v

8 Similar to quotation less pricing Generate Flat Reports Project Reports OR Structured reports organized by individual door opening Generate and Share Project Document Packets Datasheets Installation Instructions Templates Price List Page Project Document Packets Select or more documents for each product, including: Send a link for project packet to multiple recipients vi

9 LIMITED WARRANTY We warrant that all products manufactured and sold by us are free from defects in material and workmanship and those products of our design are fit for the purpose intended by us when properly installed in accordance with factory instructions. Electromagnetic locks are warranted for the life of the product. The warranty for delayed egress locks and all other products and finishes is for a period of twelve () months after the product is first put into use, or not more than fourteen () months after date of first shipment, whichever shall expire first. SDC is not responsible for changes of Oil Rubbed Bronze (/US0B) finish, which is a living finish designed to change appearance through daily use. The extent of our liability for breach of such warranty, when such is shown to our satisfaction, shall be limited to a functionally equivalent replacement, or repair of such product, or part thereof, at SDC s sole discretion, when returned, delivery prepaid, to SDC. We shall not, except to the extent this limitation may be precluded by law, be liable for inconvenience, labor costs, damages to other property, injury or any other consequential damages resulting directly or indirectly from any product defect or breach of this warranty. This warranty is limited to the original End User purchaser, is not transferable and shall not apply to maintenance, wear and tear caused by normal use, altered product, abuse or negligence. SALES POLICY THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES OF FITNESS AND MERCHANTABILITY. Terms: A minimum purchase of $00.00 annually is required to maintain an open account with Security Door Controls. Additional Terms: % - TEN (0) DAYS. Net thirty (0) days from date of invoice. Interest at -/% per month will be charged on unpaid balances beyond thirty (0) days. Orders received from 0+ day accounts will not be entered until account is current. It is understood that you may use your normal purchase order or other order forms in placing orders. However any such forms shall be used for convenience only and any terms or provisions which may be contained therein inconsistent with, or in addition to, those contained in our then current Acknowledgment to Customer form or other terms or provisions contained herein shall have no force or effect whatsoever. Custom material or wiring diagrams requires 0% deposit. At SDC's discretion, orders in excess of $00 net will be acknowledged by product category and department, and shipped on an "as ready" basis unless customer purchase order specifically states "Do not ship before," and "No partial shipments." Prices: Pricing Policy: Minimum Order: Acceptance: Change in Orders: Cancellations: Freight: Returned Goods: Back Charges: Prices are subject to change without notice. No prices are guaranteed. All shipments will be made at prices prevailing at time of shipment. Errors or omissions in pricing are subject to correction. Shipments must be accepted within sixty (0) days after receipt of the order. Contracts extending beyond this period are subject to prices in effect at the time of shipment. Our minimum net invoice charge is $00 net. We reserve the right to decline an order, in whole or in part, when the price, quantity or assortment of goods is not satisfactory to us. A charge of $0.00 will be applied to each change on any order after said original order has been previously acknowledged by SDC, plus a cost incurred by manufacturing at point of change. A charge of $0.00 will apply in addition to any cost incurred by us for any cancellation made after our acknowledgment is issued. Custom architectural housings are non-cancelable. Orders for custom architectural housings, custom parts, special and optional plated finishes are non-cancelable. All goods are invoiced F.O.B.. When delivered to the transportation company the shipments become the property of the purchaser, who assumes the risk of loss or damage in transit. All ground shipments will be made by United Parcel Service (UPS). Any defects or errors for which we are responsible will be promptly rectified. Approval for return of merchandise must be requested of us, and when granted the return authorization number must be displayed on all packages returned. Material found suitable for resale without reconditioning will be credited to customer's account less a handling and reprocessing charge of % of the net material value. Further charges will be assessed on material requiring rework to return it to saleable condition. Obsolete products will not be accepted for return. Custom products, special finish, options, size or pre-assembly configuration are considered special and are not returnable for credit. Incoming transportation charges are to be prepaid by the Buyer. Credits for material returned will have % deducted to cover the cash discount allowance on the original invoice. We are not responsible for, do not authorize, and will not accept any charges for the cost of any labor or material incurred by anyone other than Security Door Controls for any installation, repair, service or replacement unless incurred with our prior written consent and agreement. Product Changes: Shortages/ Discrepancies: Templates: Arbitration and Governing Law: Acceptance: Note: SDC reserves the right to modify, change, or discontinue any components as required. Must be made within ten (0) days after receipt of material. (The original invoice number will be required). It shall be the customer's responsibility to check all templates requested from SDC for suitability for proper door and frame preparation. Direct mail requests for the door and frame supplier will not release this customer of this responsibility. Duplicates will be mailed to distributors. In the event of a dispute or controversy, or differences, which may arise between parties, any claim shall be settled by arbitration. The arbitration shall take place in California under the rules of the American Arbitration Association. The validity, interpretation, and performance of this agreement shall be controlled by and construed under the laws of the state of California, United States of America. We reserve the right to decline an order, in whole or in part, when the price, quantity, or assortment of goods is not satisfactory to us. SDC complete sales policy as stated in our price book prevails at all times.

10 CUSTOM SYSTEM DESIGN Security, Life-Safety and Access Control. They demand the best, in planning, products and operation. So it s only good sense to work with a complete product package, and to begin with an expertly prepared, custom engineered design package from SDC. Detailed to your needs, one entrance or a complex multi-entrance system. Every professional in the field knows all too well the usual problems. Wiring specs and wiring diagrams don t match up, components are improperly planned out or missing, projects slow down and costs start escalating. Security Door Controls is prepared to assist you with a complete System Design Folder which eliminates any problems with component compatibility, system operation or wiring installation. We provide what your particular job requires in electrical drafts, instructions and data. It offers a great advantage for you, with time saved, a faster, easier, better job in every way. General instructions. Job name. Supplier. SDC reference number and drawing numbers for easy reference when technical support is needed. System operation: a detailed outline of the complete operation. A full list of components with individual instruction data for each, conduit layout indicating quantity and gauge of wires. Point-to-point wire diagrams of all component connections. All necessary data is a matter of record. In short, whatever that job requires in equipment, technical understanding or assistance, at the office or in the field, will be detailed in your SDC System Design Folder. *SDC fees vary according to requirements. ENGINEERING POLICY Engineering services are available for special system design and documentation. All requests must be submitted in writing with all detailed requirements before final quotation. Any alterations or omissions must also be submitted in writing and are subject to additional quotation. SDC assumes no responsibility for information exchanged by telephone regarding estimates or product suitability for verbally expressed systems. Fax requests will speed up the process and eliminate misunderstandings. A non-cancelable purchase order for engineering is required before any engineering may proceed. A signed Engineering Policy form is required for all system drafts. BASIC COMPONENT CONSIDERATIONS FOR A SINGLE DOOR SYSTEM. LOCKING DEVICE Electromechanical Bolt Lock Electromagnetic Lock Electric Strike Electric Mortise Lock Electrical Cylindrical Lock Delayed Egress Lock. ACCESS CONTROL Card Reader Digital Keypad Key Switch. EXIT SWITCH Push Switch Motion Detector Request to Exit Push Bar. REMOTE CONTROL Desk Switch Control/Monitoring Panel (lock status sensors required). POWER SUPPLY AND DOOR CONTROL MODULE(S) A 00 series power supply and time delay modules provide delayed re-locking, interface capability with alarm systems and access control components plus system documentation. DOOR HANDS FIRE ALARM PANEL VAC Left Hand LH Right Hand RH (Outside) Left Hand Reverse Bevel LHRB (Outside) Right Hand Reverse Bevel RHRB

11 COMMUNICATING BATHROOM EMLOCKS APPLICATION Single hospital bathroom shared by two patient rooms. SYSTEM OPERATION Both doors must be closed to lock. Activating CB0A (B) locks both doors. FROM FIRE PANEL 0 VAC INPUT Activating CB0A (B) again unlocks both doors. When doors are locked, activating either CB0B (C) emergency release will unlock both doors. Both doors will unlock automatically via signal from fire panel. SYSTEM COMPONENTS (A) Fail Safe locks with door position switch. Example: -DPS (B) CB0A System activation push switch. (C) CB0B Emergency release push switch to be mounted above each door. CB70B key switch optional. (D) RF-CR Power Supply with Fire Panel Tie- In. COMMUNICATING BATHROOM WITH HiTOWER LOCKS APPLICATION Single hospital bathroom shared by two patient rooms. SYSTEM OPERATION Both doors must be closed to lock. Activating CB0A (B) locks both doors. CB0-A When doors are locked, turning either inside door lever unlocks both doors. CB0-A When doors are locked, activating either CB0B (C) emergency release will unlock both doors. Both doors will unlock automatically via signal from fire panel. SYSTEM COMPONENTS (A) Fail Safe locks with door position switch or REX. Examples: 70-9, 780-DS, or 780-R (B) CB0A System activation push switch. (C) CB0B Emergency release push switch to be mounted above each door. CB70B key switch optional. CB0-B CB0-B POWER SUPPLY FROM FIRE PANEL 0 VAC INPUT POWER SUPPLY (D) RF-LR Power Supply with Fire Panel Tie-In.

12 DOOR INTERLOCK "A" and Door Interlock Available APPLICATIONS Darkrooms, laboratories, clean rooms, x-ray or other treatment rooms, light and air trap rooms and more. OPERATION All doors remain closed and unlocked. Opening either door causes the second door to lock until the opened door returns to the closed position. A key switch is provided for system activation and deactivation. FIRE ALARM PANEL (For Fire Safety Application Only) VAC SYSTEM COMPONENTS SHOWN (A) RFA-UR-INTA Power Supply (B) -DPS EmLock (C) 70 System On-Off Key Switch ALTERNATE B COMPONENTS Refer to literature for lock specifications. EmLocks Electric Strikes HiTower Bolt Locks 8-DPS -A-LBM 70-L FSM-9 -DPS -B-LBM 780-DS 90A-9 -DPS-TJ -C-LBM 70-L 09A-9 Indicates Fail Secure NOTES: Consult factory for and door interlocks. Operation and configurations shown may be altered for specific job application needs. Consult factory for more information. Component changes may require system design/schematic changes. Consult factory. DOOR MANTRAP "B" and Door Mantrap Available APPLICATIONS Laboratories, clean rooms, money counting rooms, restricted dark rooms, computer rooms and more. OPERATION Both doors are normally closed and locked. Unlocking either door causes the other to be incapable of being unlocked. A key switch (D) is provided for system activation and deactivation. Doors are accessed by Digital Keypad (C). SYSTEM COMPONENTS SHOWN (A) RFA-UR-MAN-B (B) -DPS-BAS or -BAS (C) 97 Digital Entry Momentary Access (D) 70 Key Switch ON-OFF ALTERNATE B COMPONENTS/LOCKING DEVICE Refer to literature for lock specifications. EmLocks Electric Strikes HiTower Bolt Locks -BAS-DPS -A-LCM-LBM 70-S FSM-9 -BA-DPS-TJ -B-LCM-LBM 70-S 90A DS Indicates Fail Secure ALTERNATE C COMPONENTS/ACCESS CONTROL - Refer to literature for switch specifications. Key Switch Desk Switch Keypad Card & Keypad Reader N KP 80N 9-KP DOOR LAYOUT FIRE ALARM PANEL (For Fire Safety Application Only) VAC DOOR LAYOUT ALTERNATE D COMPONENTS/ON-OFF SWITCH - Refer to literature for switch specifications. Desk Switch Push Switch - ON-OFF 0 ON-OFF NOTES: Consult factory for and door mantraps. Operation and configurations shown may be altered for specific job application needs. Consult factory for more information. Component changes may require system design/schematic changes. Consult factory. Consult factory for Control and Monitoring Panel applications.

13 DOOR INTERLOCK "C" and Door Mantrap Available APPLICATIONS Laboratories, clean rooms, money counting rooms, restricted dark rooms, computer rooms and more. OPERATION Door is locked, Door remains unlocked. When Door is unlocked, Door locks. When Door is opened, Door cannot be unlocked. A key switch (D) is provided for system activation and deactivation. Door is accessed by Digital Keypad. SYSTEM COMPONENTS SHOWN (A) RFA-UR-INTC Power Supply (B) -DPS-BAS EmLock (C) 97 Digital Entry Momentary Access (D) 70 Key Switch ON-OFF ALTERNATE B COMPONENTS/LOCKING DEVICE Refer to literature for lock specifications. EmLocks Electric Strikes HiTower Bolt Locks -BAS-DPS -A-LCM-LBM 70-S FSM-9 -BA-DPS-TJ -B-LCM-LBM 780-DS 90A-9 70-S Indicates Fail Secure ALTERNATE C COMPONENTS/ACCESS CONTROL - Refer to literature for switch specifications. Key Switch Desk Switch Keypad Card & Keypad Reader N KP 80N 9-KP ALTERNATE D COMPONENTS/ON-OFF SWITCH - Refer to literature for switch specifications. Desk Switch Push Switch - ON-OFF 0 ON-OFF FIRE ALARM PANEL (For Fire Safety Application Only) VAC NOTES: Consult factory for and door interlocks. Operation and configurations shown may be altered for specific job application needs. Consult factory for more information. Component changes may require system design/schematic changes. Consult factory. Consult factory for Control and Monitoring Panel applications. ELEVATOR LOBBY DOOR SYSTEM OPERATION Many high-rise building tenants that occupy a complete floor may have a problem when it comes to securing their elevator lobby doors. These doors lead through office space to the emergency exit stairwell doors. People must have free access to the stairwell at all times. This leaves some companies vulnerable to transient traffic, theft and loss of proprietary information. SDC manufactures a lobby door security system which meets both fire life safety and security needs. The elevator lobby doors are normally closed and locked by SDC Model Z780 HiTower Fail-Safe lockset. The intercom system provides two-way communication to the security desk. When a call is placed from the elevator lobby, the security desk personnel can momentarily release the SDCZ780 lockset by using the SDC Desk Console (Model DTMO-). If there is no response from the security desk personnel, the person in the elevator lobby can depress the red exit palm push button switch (SDC Model RKRU). When the red exit switch is activated, the SDC Model Z780 HiTower lock will immediately release and an alarm will sound in the elevator lobby and the security desk console. An authorized person can reset the HiTower lockset, turn off the alarm and return the system to the normal secured operation by using the built-in Key Reset on the red exit palm bush button switch. Personnel may always obtain access to the offices by use of an access control system. Egress from the office to the lobby is accomplished by rotating the inside lever. A SDC Series 00 Power Supply will provide VDC power to the HiTower locks, Security Desk Console and alarm. The emergency control relay within the power supply will turn off the system power when activated by a building fire alarm device. The SDC Model Z780 lockset will release immediately when power is removed. A System Engineered package will be provided by Security Door Controls. TO FIRE PANEL DOOR LAYOUT VAC POWER SYSTEM COMPONENTS SHOWN () SDC-Z 780 HiTower Lock () SDC-PTH- Power Transfer Hinge () 90 Stand Alone Proximity Reader () SDC-APB 000 Sign with Release Push Switch and Alarm () Intercom/CCTV by others () SDC-RF Power Supply (7) SDC-DT, RCC or TCC Door Control Console and Annunciator NOTE: All system field wiring is to be installed in accordance with all local building codes and the approval of the local authority having jurisdiction. All wiring is to be done by a licensed Access Control or Fire and Life Safety specialist.

14 97 INDOOR EntryCheck JK LIST 97U 0 user codes, to digits in length, programmable for individual or simultaneous control of relay output and voltage outputs momentary, timed or latching. Automatic time-out, REX input, duress alarm, forced entry alarm, LEDs. ELECTRICAL SPECIFICATIONS Voltage: / VAC/DC Current: 0 rest, 0 ma maximum Outputs: Relay - SPDT, 0VDC. Outputs,,, - Switch to common, VDC 0.00 SPECIFY FINISH OPTIONS U 0 Stainless Steel (standard) N/C H Oil Rubbed Bronze 0.00 C 0 Bright Brass 0.00 P Bright Chrome 0.00 D 0 Dull brass 0.00 TR Plug in power supply (optional) 0 VAC primary, secondary screw terminals with ground terminal Output : Fused unregulated 780mA Output : Regulated 0mA 9 OUTDOOR EntryCheck JK LIST 9 Outdoor keypad with 80, - digit user codes for activation of relay outputs programmable to activate separately or simultaneously for timed or latching applications. Two solid state outputs are programmable to signal two of the following: forced entry, door ajar, keypad lockout, alarm shunt, request-to-exit, relay disable or keypad active. Additional features include timed anti-passback and two LEDs. ELECTRICAL SPECIFICATIONS Voltage: / VAC/DC Current: 0 ma typical, 0 ma maximum Outputs: Relay - Form C, VDC Relay - Form "C", VDC Outputs and - Switch to common, 0VDC Operating Temperature: -0 degrees to +0 degrees F Operating Humidity: % to 9% non-condensing Housing: "W x."h x "D 98 EntryCheck JK LIST 98 Keypad with 80, - digit user codes for activation of relay outputs programmable to activate separately or simultaneously for timed or latching applications. Two solid state outputs are programmable to signal two of the following: forced entry, door ajar, keypad lockout, alarm shunt, request-to-exit, relay disable or keypad active. Additional features include timed anti-passback and two LEDs. ELECTRICAL SPECIFICATIONS Voltage: / VAC/DC Current: 0 ma typical, 0 ma maximum Outputs: Relay - Form C, VDC Relay - Form "C", VDC Outputs and - Switch to common, 0VDC Operating Temperature: -0 degrees to +0 degrees F Operating Humidity: % to 9% non-condensing Housing: "W x "H x "D

15 90 ENTRYCHECK INTEGRATED KEYPAD MK All electronics are built-in the narrow keypad. Features include: button keypad, user codes, -8 digits, Request -to- exit input, Anti-tailgating, relay output, voltage outputs, latching or momentary, - 0 second timer, tamper alarm, keypad lockout, 00 /V AC/DC. MODEL KEYPAD STYLE 90Y Black, illuminated (standard) ENTRYCHECK KEYPAD and CONTROLLER MK 9 90Y KP-U KP-Y KP-U KP-U One master and six user codes to 8 digits in length. Two SPDT relay outputs, momentary unlock and manual latching outputs, anti-tailgating, tamper alarm, REX input, non-volatile memory, ft cable, /V AC/DC SPECIFY KEYPAD MODEL KEYPAD STYLE 9 KP-U Stainless steel KP-Y Black, illuminated KP-U Black, with stainless steel face KP-U Stainless steel Two Keypads for Entry and Exit Control of One Door, or Entry Control of Two Separate Doors MODEL KEYPAD STYLE KP-U x TWC- Stainless steel and ft. cable 9.00 KP-Y x TWC- Black, illuminated and ft cable 7.00 KP-U x TWC- Black, with stainless steel face and ft cable 7.00 KP-U x TWC- Stainless steel and ft. cable.00 OPTIONS 9 EntryCheck MK LIST 9 NEW Keypad and PC managed Audit Trail, 00 user codes, temporary codes, master code, programmable outputs, tamper alarm, request-to-exit, anti-tailgating, manual or timed latching, restricted access input, PC programming/logging software, /V AC/DC LIST TWC- Replacement ft. Touchpad cable wiring 0.00 KP-AP Adapter plate for keypad mounting to single gang box.00 MODEL KEYPAD STYLE 9 KP-Y Black, illuminated KP-U Black, with stainless steel face KP-U Stainless steel KP-U KP-U Controller Specifications 9 Input: /VAC/VDC 9 Input: /VAC/VDC Operating Temperature: -0 to +0 F KP Touchpad Specifications Operating Temperature: -0 to +0 F Operating Relative Humidity: 00% LED Indicators: Red and Green KP-Y KP-AP 7

16 90 EntryCheck STAND ALONE PROXIMITY ACCESS CONTROL MK The 90 EntryCheck is a stand alone access controller with a proximity reader and keypad for PIN entry that provides all the logic necessary to control a single door. All unit programming is performed by using the built-in keypad. Proximity cards, key fobs and PIN entries can be added and deleted with the keypad using the master code or programming card. The lock relay output can be set for -99 seconds. This weather resistant unit is easily surface mounted either inside or outside and an optional glass mounting kit is also available. FEATURES: Programmable entry methods - PIN Code and Proximity Reader LED indicator and audible tone for ease of operation - PIN Code or Proximity Reader Add, change or delete cards and PINs - Proximity Reader Only Request-to-Exit input 00 users Outputs: Lock Relay and Anti-Tamper Relay Reader range up to inches (cm) Weather resistant Tamper alarm and lockout Programmable door unlock time from -99 seconds This product complies with Part Class B of the FCC rules and regulations 90 C0 K0 SPECIFY MODEL 90C PIN/Proximity reader with 0 standard prox cards K PIN/Proximity reader with 0 standard key fobs Auxiliary PIN/Proximity reader CARDS, KEY FOBS & OPTIONS LIST C0 Prox Cards, pack of 0.00 K0 Key fobs, pack of GL-KIT Glass mount reader kit for inside application 0.00 TR Plug in power supply (optional) 0 VAC primary, secondary screw terminals with ground terminal Output : Fused unregulated 780mA Output : Regulated 0mA 8.00 SPECIFICATIONS Keypad: Sealed Tactile Type Finished Casing: ABS Charcoal Grey 0 Number Keys Temperature: ºF - ºF (0ºC - 0ºC) Function Keys Relative Humidity: 0% - 9% Reader: Proximity Dimensions: -/" L x -/" W x " H Memory: Non-volatile mm L x 8mm W x mm H Indicator: Green LED - Door Open Weight: 0 oz. (0.8Kg) Red LED - Standby Proximity Card: 0-bit Wiegand Format Power Required: VDC Regulated Required Transmit Frequency: KHz Current: Standby - VDC Operating - VDC Output: Lock Relay VDC Resistive GLASS MOUNTING KIT 8

17 E7 K - A CIVIC SERIES USER CYLINDRICAL LOCKSET MMK The E7K-A Civic is a user battery powered cylindrical digital door lock that incorporates the basic features required to accommodate most stand alone access control applications, including temporary users, at a highly competitive cost. Standard features include an ANSI Grade cylindrical lockset with a lever clutch mechanism, -0 digit PIN code, all weather keypad and housing, keypad programmable, 9 management groups, 90 user groups, 8 programmable holidays, manual passage mode, first manager to arrive dual code entry and daylight savings mode. NEW G G E E E7 K - A CIVIC SERIES E7K-A users, /" strike, No Audit Trail SPECIFY LEVER HANDLE Lever Handles with Standard Key Cylinders G E SPECIFY FINISH Galaxy lever, pin cylinder with Schlage C Keyway Eclipse lever, pin cylinder with Schlage C Keyway Lever Handles Less Standard Key Cylinders G E Galaxy lever less cylinder. Specify tailpiece kit for competitive brand cylinders, i.e. GT Eclipse lever less cylinder. Specify tailpiece kit for competitive brand cylinders, i.e. ET Tailpiece Kits for G and E Lever Handles T Arrow PK 00C, ILCO 70, Sargent -, Lorie 9, ASSA 7, 9, Abloy T Schlage -00, Primus, Corbin-Russwin T9 T9C TMY TM & 7 pin Marks, KSP, Best, Falcon, Medeco, Keymark, Schlage Small Format, pin Sargent & 7 pin Corbin & 7 pin Yale pin Schlage large format LIST Lever Handles for use with Corbin Russwin Standard Cylinders 0.00 G9 E9 Galaxy, Corbin cylinder by others Eclipse, Corbin cylinder by others Levers for Interchangeable Cores. All I-cores provided by others 0.00 G Galaxy* E Eclipse* *Accepts & 7 pin Schlage small format, Medeco, Keymark, Best, Falcon, Marks, KSP and pin Sargent. G Galaxy, accepts Corbin pin E Eclipse, accepts Corbin pin G Galaxy, accepts Corbin 7 pin E Eclipse, accepts Corbin 7 pin G Galaxy, accepts Yale pin E Eclipse, accepts Yale pin G Galaxy, accepts Yale 7 pin or Medeco -7 E Eclipse, accepts Yale 7 pin or Medeco -7 G9 Galaxy, accepts Schlage pin E9 Eclipse, accepts Schlage pin N/C N/C N/C B Black Powder Coat case with Dull Chrome lever (standard) N/C Q Dull Chrome.00 SPECIFY OPTIONS BS.7" (0mm) backset 0.00 SK- Spacer kit for.7" door thickness.00 ST 7/8" strike N/C 9

18 E7 ENTRYCHECK ELECTRONIC CYLINDRICAL LOCKSET MMK The E7 is a battery powered electronic lockset for 0 to 000 users. Optional computer management and audit trail capabilities are available for demanding applications. Standard features include an ANSI Grade cylindrical lockset with a lever clutch mechanism, -0 digit pin code, all weather keypad and housing, keypad or computer programming, 9 management groups, 90 user groups, multi-year scheduling, temporary users audit trail capability, multiple zones, real time clock, auto daylight savings adjustment and more. 9/" latch, 7/8" strike standard. SPECIFY KEYPAD OR PROX ENTRY FOR 0 TO 000 USERS LIST E7K E7P Keypad Entry (idt & software optional) Prox or Prox and Keypad Entry (idt and software required) E7K-B 0 users, 00 even audit trail 0.00 E7P-D 80 users, 00 event audit trail E7K-C 00 users, 00 event audit trail 0.00 NEW E7P-E 00 users, 00 event audit trail E7K-D 80 users, 00 event audit trail E7P-F 000 users, 80 event audit trail E7K-E 00 users, 00 event audit trail Card enroller from SDC or by others required. E7K-F 000 users, 800 event audit trail HID ProxCard II from SDC or your local security product distributor idt E70-PCE SPECIFY LEVER HANDLE Lever Handles with Standard Key Cylinders G Galaxy lever, pin cylinder with Schlage C Keyway G N/C E Eclipse lever, pin cylinder with Schlage C Keyway E N/C Lever Handles Less Standard Key Cylinders G Galaxy lever less cylinder Specify tailpiece kit for competitive brand cylinders, i.e. GT N/C E Eclipse lever less cylinder Specify tailpiece kit for competitive brand cylinders, i.e. ET N/C Tailpiece Kits for G and E Lever Handles T Arrow PK 00C, ILCO 70, Sargent -, Lorie 9, ASSA 7, 9, Abloy N/C T Schlage -00, Primus, Corbin-Russwin N/C T9 & 7 pin Marks, KSP, Best, Falcon, Medeco, Keymark, Schlage Small Format, pin Sargent N/C T9C & 7 pin Corbin N/C TMY & 7 pin Yale N/C TM pin Schlage large format N/C Lever Handles for use with Corbin Russwin Standard Cylinders G9 Galaxy, Corbin cylinder by others 0.00 E9 Eclipse, Corbin cylinder by others 0.00 Levers for Interchangeable Cores. All I-cores provided by others G Galaxy* E Eclipse* N/C *Accepts & 7 pin Schlage small format, Medeco, Keymark, Best, Falcon, Marks, KSP and pin Sargent G Galaxy, accepts Corbin pin E Eclipse, accepts Corbin pin N/C G Galaxy, accepts Corbin 7 pin E Eclipse, accepts Corbin 7 pin N/C G Galaxy, accepts Yale pin E Eclipse, accepts Yale pin N/C G Galaxy, accepts Yale 7 pin or Medeco -7 E Eclipse, accepts Yale 7 pin or Medeco -7 N/C G9 Galaxy, accepts Schlage pin E9 Eclipse, accepts Schlage pin N/C SPECIFY FINISH OPTIONS & ACCESSORIES B Black Powder Coat (Standard) N/C C 0 Bright brass.00 Q Dull Chrome.00 H Oil Rubbed Bronze.00 P Bright Chrome.00 idt Data transmitter, management software 0.00 BS.7" backset 0.00 M Key access & manual lever egress, SK- Spacer kit for.7" door 0.00 audit trail capability T.7" (70mm) T strike N/C AO Auxiliary relay output (hard wired) 0.00 E70-C CARDS, KEY FOBS & CARD ENROLLER MV 0 E70-K0 E70-C HID ProxCard II, cards 0.00 E70-PCE Prox card enroller E70-K0 HID ProxKey II, 0 key fobs 0.00 ProxCard and ProxKey are registered trademarks of HID Corp.

19 E7 ENTRYCHECK MORTISE LOCKSET MMK LIST The E7 is a battery powered electronic lockset for 0 to 000 users. Optional computer management and audit trail capabilities are available for demanding applications. Standard features include and ANSI Grade mortise lockset with a lever clutch mechanism, to 0 digit pin code, all weather keypad and housing, keypad or computer programming, 9 management groups, 90 user groups, multi-year scheduling, temporary users, audit trail capability, multiple zones, real time clock, auto daylight savings adjustment and more. 9/" latch, 7/8" strike standard. Keypad Entry (idt & software optional) E7 ENTRYCHECK RIM EXIT DEVICE INTERFACE MMK LIST idt E70-PCE E70-C E7K E7P SPECIFY LEVER HANDLE SPECIFY FINISH OPTIONS & ACCESSORIES E7 ADAPTER PLATE Prox or Prox and Keypad Entry (idt and software required) E7K-B 0 users, 00 even audit trail E7P-D 80 users, 00 event audit trail 0.00 E7K-C 00 users, 00 event audit trail NEW E7P-E 00 users, 00 event audit trail 0.00 E7K-D 80 users, 00 event audit trail E7P-F 000 users, 80 event audit trail 0.00 E7K-E 00 users, 00 event audit trail E7K-F 000 users, 800 event audit trail The E7 is an electronic rim exit device interface for 0 to 000 users. Optional computer management and audit trail capability is available for demanding applications. The E7 includes all the access control features found in the E7 and E7 series. Keypad Entry (idt & software optional) Prox or Prox and Keypad Entry (idt and software required) E7K-B 0 users, 00 even audit trail E7P-D 80 users, 00 event audit trail 0.00 E7K-C 00 users, 00 event audit trail NEW E7P-E 00 users, 00 event audit trail 0.00 E7K-D 80 users, 00 event audit trail E7P-F 000 users, 80 event audit trail 0.00 E7K-E 00 users, 00 event audit trail E7K-F 000 users, 800 event audit trail G Galaxy E Eclipse Card enroller from SDC or by others required. HID ProxCard II from SDC or your local security product distributor Card enroller from SDC or by others required. HID ProxCard II from SDC or your local security product distributor B Black Powder (standard) N/C Q Dull Chrome.00 C 0 Bright brass.00 P Bright Chrome.00 H Oil Rubbed Bronze.00 idt Infrared data transmitter & computer management software 0.00 M Key access and manual lever egress audit trail capability AO Auxiliary relay output (hard wired) 0.00 E70-AP Von Duprin E70-AP Sargent E70-AP Precision E70-AP7 Corbin ED E70-AP Precision 0.00 E70-AP8 Dorma E70-AP Precision E70-AP9 Arrow E70-AP Detex Advantex 0.00 E70-AP0 Yale CARDS, KEY FOBS & CARD ENROLLER MV E70-K0 E70-C HID ProxCard II, cards 0.00 E70-PCE Prox card enroller E70-K0 HID ProxKey II, 0 key fobs 0.00 ProxCard and ProxKey are registered trademarks of HID Corp.

20 ACCESS CONTROL SYSTEM MMMK A Simple, Affordable and Complete Access Control System. The Configuration Wizard Makes Set Up As Easy As - -. The E EntryCheck Access Control System consists of an easy to understand Windows based software CD, a door controller in a large hinged cover enclosure, one or two proximity readers and 0 cards. Every thing you need for a complete access control solution. Controllers with Power Supply Chargers Master and Expansion controllers may be ordered complete with the power supply/chargers. Built-in SDC power supply () is capable of providing power and battery backup for the access control only. Power supplies () and () provide power and battery backup for both the access control and electric locks for continued operation of the complete system during a power failure. Power Supply Features VDC Access Control Output.VDC Battery Charger Output FEATURES Real-Time Windows based Access Control Systems Automatic Program Installation and Set Up with the Configuration Wizard Up to Readers, 000 Cardholders and 0,000 History Transactions Handicapped Access Entry Automatic Card Activation and Deactivation User Friendly Reports Electronic Update of Firmware Power Supply & Features VDC Access Control Output Field Selectable /VDC Lock Output Field Selectable./.VDC Charging Output Emergency Release Input Smart Supervised Inputs Auto-Calibrating ESD Protection on Inputs and Outputs Supervised Reader Detection Readers, Door Locks, Door Lock Status, Request-To-Exit cables connect to screw terminals RS8 Multi-point Communication No limitations in cable distance from Host to Controllers Windows is a Registered Trademark of Microsoft Corporation

21 SPECIFY MASTER CONTROLLER MMMK LIST CONTROLLER Enclosure: -/ x -/ x (8. cm x 8. cm x 7. cm) Accommodates two V Ah batteries CONTROLLER WITH POWER SUPPLY OR All other features same as above CONTROLLER WITH POWER SUPPLY Housed in large hinged cover cabinet h x w x d (.cm h x 0.7cm h x.cm d) Up to six V 7 Ah Batteries All other features same as above Master Controller Components: or readers, controller and enclosure, Software, RS8, 0 Cards MODEL DESCRIPTION E-MN Reader E-MN Readers 9.00 E-MN Reader & Power Supply/Charger # for access control 0.00 E-MN Readers & Power Supply/Charger # for access control.00 E-MN Reader & Power Supply/Charger # for access control & locks Max lock capacity 0.8 /VDC 8.00 E-MN Readers & Power Supply/Charger # for access control & locks Max lock capacity 0.8 /VDC.00 E-MN Reader & Power Supply/Charger # for access control & locks Max lock capacity. /VDC E-MN Readers & Power Supply/Charger # for access control & locks.00 Max lock capacity. /VDC SPECIFY EXPANSION CONTROLLER Expansion Controller Components: or readers, controller and enclosure MODEL DESCRIPTION E-EN Reader 7.00 E-EN Readers.00 E-EN Reader & Power Supply/Charger # for access control E-EN Readers & Power Supply/Charger # for access control E-EN Reader & Power Supply/Charger # for access control & locks Max lock capacity 0.8 /VDC 8.00 E-EN Readers & Power Supply/Charger # for access control & locks Max lock capacity 0.8 /VDC E-EN Reader & Power Supply/Charger # for access control & locks Max lock capacity. /VDC 8.00 E-EN Readers & Power Supply/Charger # for access control & locks Max lock capacity. /VDC 0.00 OPTIONS & ACCESSORIES LIST MODEL DESCRIPTION E-C0 Proximity cards, pack of 0 (vertical slot punch) 0.00 E-K0 Key fobs, pack of PR-N Proximity reader, narrow (- read range) RBV V, Ah battery (for x enclosure).00 RBV7 V, 7Ah battery (for x enclosure) 8.00 PR-N READER E-C0 CARD E-K0 FOB RS8

22 PTH SERIES POWER TRANSFER HINGE LSK LIST 0B Listed For Hrs Fire Rated Doors NEW Power Transfer Hinge Application Installed in the center hinge position of the door, PTH Power Transfer Hinges provide the concealed wires required to transfer power from the frame to electric hardware in the door for control and monitoring capability. Features ' Ft Cable UL0B Listed for Hour Fire Rated Doors. 800,000 cycles. 8 times UL test criteria Wire Replacement Warranty PTH x Ft Cable PTH x Ft Cable And Door Position Switch DOOR CORE DRILL KIT NEW PTH-Q PTH-Q-DPS PTH-0Q PTH-0Q-DPS SPECIFY FINISH Dull Chrome finish is standard as specified by suffix Q. To specify special finish, designate finish suffix below in lieu of Q. C 0 Bright brass N/C H Oil rubbed bronze N/C P Bright Chrome N/C OPTIONS Consult factory for knuckle, and special size, and heavy weight requirements The SDC door core drill fixture provides the best method of wire preparation for fire rated or non fire rated particle filled or solid wood doors to accommodate the installation of electrified locksets, exit devices and hinges while maintaining door integrity and rating Four () Conductor Power Transfer Hinge 8 gauge - -pair Amp, -pair 0 ma. x. standard weight, Dull Chrome Four () Conductor Power Transfer Hinge with Door Status Contact 8 gauge - -pair Amp, -pair 0 /V AC/DC Door Status Contact: 0 0VDC. x. standard weight, Dull Chrome Ten (0) Conductor Power Transfer Hinge 0 gauge - -pair Amp, -pair 0 ma. x. standard weight, Dull Chrome Ten (0) Conductor Power Transfer Hinge with Door Status Contact 0 gauge - -pair Amp, -pair 0 ma Door Status Contact: 0 0VDC. x. standard weight, Dull Chrome Tested by ITS/ Warnock Hersey for field drilling of rated doors Installer may call for inspection of doors to be re-certified after drilling Allows for drilling from the hinge side without removing the door from the frame Will drill at 0 degrees from center, up or down, from the hinge to the lock prep on a '0" door Drills doors in minutes Easy to use, no experience required Includes special 8 inch evacuator drill bit with custom tool room sharpened end High speed Delrin bushings ensure long tool life at high speed drilling with little or no noise. Your commercial customers will love the quiet operation in their offices 7000-DF Door Core Drill Fixture 0.00 NET 7000-DB /8" Custom Replacement Drill bit.00 NET NET Discount Not Applicable

23 GRADE ELECTRIFIED CYLINDRICAL LOCKS LSK Function: 700 series locksets are locked on the outside and unlocked from the exterior by an access control or mechanical key. The inside lever is always operable for uninhibited egress. Request-to-Exit Output: Standard with all SDC brand Z700 locksets. SPDT, 0VDC NEW NEW Z70G S70SPA ZS70SPA S70ROH ZS70ROH I-CORE Z70E Electrically Controlled Single Point Locks & Latches, Hr A Label Fire Doors Features Clutch for vandal resistance Choice of failsecure or failsafe mode Dual / VDC REX output: Z700 standard; S and ZS700 optional 'C' type keyway Independent lever power return springs SPECIFY MODEL Locks supplied by SDC LIST Lockset provided by customer for electrification Z70 SDC Failsafe, with REX Output 9.00 S70 Schlage, Failsafe 0.00 Z7 SDC Failsecure, with REX Output 9.00 S7 Schlage, Failsecure 0.00 ZS70 Schlage, Failsafe 0.00 ZS7 Schlage, Failsecure 0.00 SPECIFY LEVER TRIM SDC Lever Trim OPTIONAL CYLINDER and I-CORES OPTIONAL STRIKE PLATES Schlage Lever Trim G Galaxy RHO Rhodes N/C E Eclipse SPA Sparta N/C SPECIFY FINISH Specifications Dual Voltage, 00/00 /VDC Exceeds ANSI A--000 Grade 0." latchbolt.7" Backset.87 strike ANSI A. C 0 Bright Brass H Oil Rubbed Bronze N/C D 0 Dull Brass P Bright Chrome N/C F Bright Bronze Q Dull Chrome N/C G Dull Bronze N/C LIST Optional Cylinder PIN Keyed different is standard PKA PIN Keyed alike N/C Interchangeable Core (SDC Brand Locks Only) ICP-KA pin I-Core, small format, keyed alike 0.00 ICP-KD pin I-Core, small format, keyed different 0.00 IC7P-KD 7 pin I-Core, small format, keyed different 0.00 IC7P-KA 7 pin I-Core, small format, keyed alike " ANSI strike is standard unless specified otherwise S." ANSI strike with square corners 0.00 S." Full lip strike with square corners (for wood frames) 0.00 OPTIONAL LATCH AND BACKSET ASSEMBLIES 77-0:0 CSFM L7 0.7" Latchbolt assembly (required for pairs of Hr, A label, Fire Rated Doors).00 B.7" backset latch assembly with 0." Latch 0.00 OPTIONS & ACCESSORIES REX For S700 and ZS700, request-to-exit output, SPDT, 0VDC Drill guide for locating /" thru-bolt holes.00

24 SELECTRIC PRO Z7800 ELECTRIC LOCKSET LSK Selectric Pro locksets incorporate an SDC manufactured Grade Heavy Duty mortise lockset and vandal resistant clutch mechanism. Proprietary to SDC, Selectric Pro locksets, all operational attributes are field selectable. In addition, Selectric Pro locksets retrofit many other mechanical lock brands making them fully compatible with new and retrofit applications. NEW Field Selectable Attributes Selectable mode, failsafe or failsecure Selectable function, locked outside only or both sides Selectable voltage, or VDC Selectable handing CSFM 77-0:0 MEA City of New York SA Electrically Controlled Single Point Locks or Latches Hr A Label Fire Rated Doors G GE SPECIFY FUNCTION AND MODE SDC Supplied Electrified Locksets with lever trim SDC Brand 7800 lockset. Clutch for lever trim vandal resistance, SDC lever trim Z780 Locked both sides, failsafe. Field reversible to failsecure mode Z780 Locked outside only, failsafe. Field reversible to failsecure mode Z78 Locked both sides, failsecure. Field reversible to failsafe mode Z78 Locked outside only, failsecure. Field reversible to failsafe mode SPECIFY HAND L Left hand LR Left hand reversed N/C R Right hand RR Right hand reversed N/C SPECIFY FINISH U 0 Dull Stainless Steel (standard) F Bright Bronze P Bright Chrome N/C C 0 Bright Brass G Dull Bronze Q Dull Chrome N/C LIST Service@sdcsecurity.com D 0 Dull Brass H Oil Rubbed Bronze S 9 Bright Stainless Steel N/C SPECIFY LEVER TRIM G Galaxy with rose N/C GE Galaxy with escutcheon.00 E EE E Eclipse with rose N/C EE Eclipse with escutcheon.00 N Nova with rose N/C NE Nova with escutcheon.00 N NEW NE OPTIONS AND ACCESSORIES Optional Outputs R Request-to-exit. Indicates inside lever operation for access control request-to-exit input, alarm shunt, remote annunciation or CCTV activation, SPDT 0VDC 7.00 D Door position status output. Indicates door open and door closed. SPDT 0VDC S Latched & locked status output. Indicates door latched and locked and door unlocked. SPDT 0VDC Optional Cable and Connectors CC- ft. Cable and connectors for locks without optional outputs 0.00 CC- ft. Cable and connectors for locks with optional outputs 0.00 Price List Effective January, 00 Optional Key Cylinders required for 780/78 required for 780/ PTH UL 0B Listed for Hr Fire Rated Doors See page CYL-KDQ pin,." keyed different, Dull Chrome 0.00 CYL-KAQ pin,." keyed alike, Dull Chrome 0.00 Power Transfer Hinge UL listed,.", five knuckle hinge. Consult factory for " or " heavy weight requirements. Special finish available PTH-Q Four wire, dull chrome 0.00 PTH-0Q Ten wire, dull chrome 9.00

25 SELECTRIC CONVERSIONS 7800 SERIES LOCKSETS Send the brand lockset of your choice to SDC for electrification. When factory authorized, distributors may take advantage of SDC s mechanical lock inventory to expedite orders. SDC stocks Schlage, Corbin Russwin, Yale, Best and Sargent mechanical locks that may be electrified and charged to an order. Meanwhile, distributors may then send replacement mechanical locks to SDC for credit and SDC inventory replenishment. Schlage Dorma Arrow Falcon Field Selectable Attributes Selectable mode, failsafe-failsecure Selectable voltage, /VDC Selectable function and handing based on brand capability Sargent Marks Cal Royal NEW PDQ Yale Corbin Russwin Best PTH UL 0B Listed for Hr Fire Rated Doors See page SPECIFY BRAND MODEL New mechanical lock chassis provided by customer for factory electrification A Falcon - LM P Yale V Marks - J 0.00 D Sargent - 80 S Schlage - L9080 W Cal Royal - M I Corbin/Russwin - ML0 T Best - HEW X PDQ - MR N Arrow - B U Dorma - ML Note: Two locking hubs required for 780 & 78 Electrified lock chasis, less trim, provided by SDC factory ZS Schlage 0.00 ZN Arrow 0.00 ZA Falcon ZP Yale ZD Sargent ZT Best ZI Corbin Russwin NOTE: All locks supplied less cylinder SPECIFY FUNCTION & ELECTRICAL MODE LSK 780 Locked both sides, failsafe. Field reversible to failsecure Locked outside only, failsafe. Field reversible to failsecure. N/C 78 Locked both sides, failsecure. Field reversible to failsafe Locked outside only, failsecure. Field reversible to failsafe. N/C SPECIFY HAND L Left hand LR Left hand reversed N/C R Right hand RR Right hand reversed N/C SPECIFY FINISH MEA City of New York SA NEW U 0 Dull Stainless Steel (standard) F Bright Bronze P Bright Chrome N/C C 0 Bright Brass G Dull Bronze Q Dull Chrome N/C D 0 Dull Brass H Oil Rubbed Bronze S 9 Bright Stainless Steel N/C OPTIONS AND ACCESSORIES CSFM 77-0:0 Optional Outputs R Request-To-Exit Indicates inside lever operation for access control request-to-exit input, alarm shunt, remote annunciation or CCTV activation, SPDT 0VDC Available with locks A, D, I, N, P, S, T, U, S, V and ZS only. D Door Position Status Output Indicates door open and door closed. SPDT 0VDC Available with locks Z and S only. S Latched & Locked Status Output Indicates door latched and locked and door unlocked. SPDT 0VDC Available with locks Z and S only. L Latchbolt status. Indicates door latched and unlatched status. SPDT 0VDC Available with locks A, D, I, N, P, S, T, U, V and ZS only. Consult factory for recent updates of option availability with any model Electrically Controlled Single Point Locks or Latches Hr A Label Fire Rated Doors LIST Optional Cable and Connectors CC- ft. Cable and connectors for locks without optional outputs 0.00 CC- ft. Cable and connectors for locks with optional outputs

26 700 SERIES HiTower LSK HiTower Electric Frame Actuator Controlled Locksets The HiTower utilizes SDC s original concept of utilizing an electric frame actuator to control a mechanical lock in the door, eliminating the cost and labor associated with a power transfer hinge and wires through the door. HiTower Z700 SDC brand Grade Heavy Duty lockset Field selectable function, Locked outside only or both sides HiTower Conversions Distributors provide a new mechanical lock brand of choice to the factory for conversion to an electric frame actuator controlled lockset. MEA City of New York SA CSFM 77-0:0 Electrically Controlled Single Point Locks or Latches Hr A Label Fire Rated Doors G Galaxy E Eclipse Z700 O70 Yale Conversion GE EE SPECIFY SOURCE OF MORTISE LOCK HiTower Pro - Mortise Locks with trim provided by SDC Z SDC lockset ZR SDC Retrofit lockset (replaces 000/000 series) HiTower Conversion - New Mechanical Locks provided by your distributor for electric control A Falcon* LM-8 O Yale 70F Exit device D Sargent 80 P Yale 880 I Corbin/Russwin 07 R Schlage Retro L9080 (replaces 000 series) N Arrow B S Schlage L9080 T Best HEW and H *All Falcon locks must be supplied with face plate, less hub locking bar SPECIFY FUNCTION 70 Locked both sides Unlocked by access control, remote control and key from either side, failsafe 70 Locked outside only Unlocked by access control, remote control, outside key and inside lever, failsafe 70 Locked both sides Unlocked by access control, remote control and key from either side, failsecure 770 Locked outside only Unlocked by access control, remote control, outside key and inside lever, failsecure SPECIFY HAND L Left hand LR Left hand reversed R Right hand RR Right hand reversed ACTUATOR VOLTAGE AND FRAME SIZE Failsafe actuator for -/" to " face frames Extra Narrow failsafe actuator for -/" to -/" face frames A VAC 0. Amps D VAC 0. Amps G VAC 0. Amps B VAC 0. Amps E VAC 0. Amps H VAC 0. Amps C VDC 0. Amps F VDC 0. Amps J VDC 0. Amps SPECIFY FINISH LIST +Failsecure actuator for " face frames + Fail Secure Actuator Available with Z or S lockset only. Special strike preparation required U 0 Dull Stainless Steel (standard) F Bright Bronze P Bright Chrome C 0 Bright Brass G Dull Bronze Q Dull Chrome D 0 Dull Brass H Oil Rubbed Bronze S 9 Bright Stainless Steel N Nova NE SPECIFY LEVER TRIM FOR Z & ZR G Galaxy with rose GE Galaxy with escutcheon E Eclipse with rose EE Eclipse with escutcheon N Nova with rose NE Nova with escutcheon 8

27 PRICING BY SOURCE AND FUNCTION LK LIST HiTower MORTISE LOCK SOURCES Z AND ZR SDC mortise lock, trim and actuator supplied by SDC Source/Function Z70 Failsafe, locked both sides with rose trim.00 Z70 Failsafe, locked outside only with rose trim.00 Z70 Failsecure, locked Both sides with rose trim Z770 Failsecure, locked outside only with rose trim ZR70 (Replaces 000 series) Failsafe, locked both sides with rose trim 7.00 ZR70 (Replaces 000 series) Failsafe, locked outside only with rose trim 7.00 ZR70 (Replaces 000 series) Failsecure, locked both sides with rose trim ZR770 (Replaces 000 series) Failsecure, locked outside only with rose trim Extra Narrow Failsafe Frame Actuator Add 0.00 (Actuator type D, E, F, Z only page 8) For -/" to -/" frames. Special strike prep required. Not available with ZR or failsecure 70 and 770 Escutcheon Trim GE, EE, NE Add.00 HiTower CONVERSIONS MORTISE LOCK SOURCES A - Q AND S - V Mortise lock supplied by distributor for modification and actuator supplied by SDC Source/Function A - Q and S - V 70 Failsafe, locked both sides 0.00 A - Q and S - V 70 Failsafe, locked outside only 0.00 S70 Failsecure, locked both sides S770 Failsecure, locked outside only 0.00 Extra Narrow Failsafe Frame Actuator 0.00 (Actuator type D, E, F, Z only page 8) For -/" to -/" frames. Special strike prep required. Not available with R or failsecure 70 and 770 HiTower MORTISE LOCK SOURCE R Schlage Mortise lock supplied by distributor for modification and actuator supplied by SDC Source/Function R70 (Replaces 000 series) Failsafe, locked both sides 0.00 R70 (Replaces 000 series) Failsafe, locked outside only 9.00 R70 (Replaces 000 series) Failsecure, locked both sides 0.00 R770 (Replaces 000 series) Failsecure, locked outside only 0.00 OPTIONS AND ACCESSORIES Lock status and wire harness L Latch status switch, SPDT, 0VDC 0.00 S Latch and deadlock status, 0VDC SC-0 Socket connectors with 0 ft. cable 0.00 Special Strikes WSP -/" x 9-/" wood strike 0.00 SSP Special retrofit strike plate POA Specify extended lip strike in writing for the following Std. -/" actuator with -/8" - -/" extended lip 0.00 Std. -/" actuator with -/" - " extended lip 0.00 Narrow -/" actuator with -/8" - -/" extended lip 0.00 Narrow -/" actuator with -/" - extended lip 0.00 Electrical back boxes for frame actuators with conduit knockouts: (Recommended for new construction) 700EB-S For standard actuator in -/" or " face frame EB-N For narrow actuator in -/" or -/" face frame

28 CONVENTIONAL MORTISE BOLT LOCKS AK LIST 90A A 0/0 Dual Voltage Coil: 900/0 / VDC 0/0 Dual Voltage Coil: 900/0 / VDC Mortise strike standard " depth required 0 -/ x -/ Face plate, less auto re-lock switch, failsafe V 8 Aluminum (standard) 0 -/ x -/ Face plate, less auto re-lock switch, failsecure V 8 Aluminum (standard) 0-7/8 x -/ Face plate with auto re-lock switch, failsafe Q Dull Chrome (standard) 0-7/8 x -/ Face plate with auto re-lock switch, failsecure Q Dull Chrome (standard) 00EB Wood frame back box for 0/0 series (not available for 0/0) SPECIFY VOLTAGE SPACESAVER MORTISE BOLT LOCKS FIT -/" FRAMES AK LIST FSM 09A 09ADL 9A CSFM 77-0:00 90A 90A Example: 0IV 0/0 0/0 Dimensions: 8"L x -/"W x -/8"D FS/090/90 Dual Voltage Coil: 900/0 / VDC 90/90 Dual Voltage Coil: 900/0 / VDC Finish: V 8 Aluminum (standard) See special finish on page I /VDC N/C H /VDC N/C See finish on page FSM Dual failsafe Less auto re-lock, failsafe A Failsafe.00 09ADL Dead locking, failsafe.00 9A Failsecure A Fits -/" frame (non UL), failsafe A Failsecure. Fits -/" frame (non UL), failsecure EB Back box for FSM-090A.00 WD Suffix for wood face plates.00 SPECIFY VOLTAGE Example: 09AIV 09A-09ADL/90A/FSM Example: 9AHV Example: 0HV 9A/90A I /VDC N/C H /VDC N/C HEAVY DUTY SPACESAVER MORTISE BOLT LOCKS AK LIST 90A failsafe, VDC 090A failsecure, Amp In rush, 0. Amp VDC, Amp locking coil,. Amp release coil, /" bolt, /" throw, VDC Auxiliary Locks 90A Failsafe A Failsecure.00 90MRA * Failsafe A Failsecure UL0C Positive Pressure Compliant UBC Classified in accordance with Uniform Building Code standard 7- Fire Test for Door Assemblies 090MRA * Failsecure * Indicates Handing Required 090MRA * Failsecure 0.00 PANICLOK EXIT DEVICE RELEASE AK LIST PBD090A Finish: V 8 Aluminum std. VDC,.0 A inrush, 0.A seated PBD090A Dor-O-Matic/Kawneer (handing required) *See special finishes & options page 0

29 CABINET LOCK AK LIST 90 For drawers or cabinets and display cases with swinging or sliding doors Failsecure (field reversible for failsafe) Dual Voltage: 0mA/0mA Dimensions:. L x. W x. D Finish: Black 90 Micro cabinet lock /80 B Standard F 90LS Micro cabinet lock with locked status switch 0.00 UNIVERSAL SURFACE MOUNT LOCKS AK LIST Dimensions: L x W x H 80 Dual Voltage Coil: 900/0 / VDC 80 Dual Voltage Coil: 900/0 / VDC Standard finish: 8 Aluminum 80F Surface mount, less ARS, F strike, failsafe B Surface mount, less ARS, B strike, failsafe.00 80AB Surface mount, ARS, B strike, failsafe.00 80F Surface mount, less ARS, F strike, failsecure B Surface mount, less ARS, B strike, failsecure.00 SPECIFY FINISH V 8 Anodized Aluminum (standard) N/C Mortise Bolt Locks X Dark Bronze 0.00 Y Black.00 Single Surface Mounted Bolt Locks X Dark Bronze 0.00 Y Black 8.00 Plated Architectural Finishes - Mortise Bolt Locks Only C 0 Bright Brass D 0 Dull Brass P Bright Chrome F Bright Bronze Q Dull Chrome G Satin bronze U 0 Stainless steel H Oil rubbed bronze OPTIONS CK Magnetic bolt position sensor, SPDT 8.00 DPS Mechanical door position sensor, SPDT (not available with 80/80) Magnetic door position sensor, SPDT (not available with 80F/80F) 8.00 BRAL Rectifier for AC Operation 0.00

30 GATE LOCKS AK LIST Designed for outdoor installation on swinging or sliding gates. Specify swinging or sliding gate Specify /VDC or VAC Specify / VDC or VAC GL0A Failsafe GL0A Failsecure GLA Keyswitch, failsafe GLA Keyswitch, failsecure GL0MRA Mechanical key unlock, failsecure GLA GLA OPTIONS DPS-GL Gate position sensor SPDT for gate lock (GL series) BPS-GL Bolt position sensor, SPDT for gate lock AC VAC Voltage 8.00 REPLACEMENT SOLENOIDS AK For surface and mortise mounted bolt locks 090, 90 and FS Bolt Locks Part No. Voltage Amp, Failsafe (SDC 700 HiTower only) Amp, Failsafe Amp, Failsafe Dual Coil 0.9 Amp, 0.A, Failsafe Bolt Locks Part No. Voltage 0.7 Amp, Failsafe and 90 Bolt Locks Part No. Voltage Amp, Failsecure Amp, Failsecure Amp, Failsecure Dual Coil, 0.9 A 0.A Bolt Lock Part No. D HiTower 70, 770 Actuator Controlled Locksets Part No. Voltage VDC less switch, Failsecure (Amp In-Rush 0. Amp Holding) Voltage DS VDC with coil transfer switch, Failsecure Bolt Lock Part No. Voltage -S Amp unlocking coil, Failsecure Amp locking coil, Failsecure A, Failsecure A, Failsecure Failsecure SELECTRIC 7800 Electrified Lockset Part No. Voltage / 00/00 ma Reversible Failsafe-Failsecure 90.00

31

32 EMLOCKS GK EMLock Lifetime Warranty GWXT Auxiliary Locks CVXJ Burglary Resistant Electrically Operated Door Lock UL0C Positive Pressure Compliant UBC Classified in accordance with Uniform Building Code standard 7- Fire Test for Door Assemblies Uniform Design and Installation of all Models EZ IDENTICAL HOUSING AND MOUNTING 0 lbs. EZ8 0 lbs. 0 Series Grade 0 lb / 78 Kg Holding Force Electrical Specifications Voltage: /VDC Voltage Sensing Input Single: VDC; VDC Double: Mechanical Specifications Single: " L x.7" H x." D (79. x 9.9 x 9.7 mm) Double: " L x.7" H x." D (8.8 x 9.9 x 9.7 mm) Common Configurations (Alum. Finish) EZ7 Lifetime Serviceability and Upgradeability V Single EmLock 9.00 V-DPS Door Sensor.00 V-BA Bond Sensor 9.00 V-T Relock Timer 0.00 V-BADPS Door/Bond Sensor.00 V-TJV Top Jamb kit 9.00 V-HDBV Glass Door kit 7.00 V Double EmLock V-DPS Door Sensor V-BA Bond Sensor V-T Timer 8.00 V-TJV Top Jamb kit V-HDBV Glass Door kit, lbs. UNIFORM MOUNTING Field Upgrades and service without removing the lock from the frame eliminates lock replacement lead time and labor 70 Series Grade 00 lb / Kg Holding Force Electrical Specifications Voltage: /VDC Voltage Sensing Input Single: VDC; VDC Double: VDC; VDC Mechanical Specifications Single: " L x.7" H x." D (79. x 9.9 x 9.7 mm) Double: " L x.7" H x." D (8.8 x 9.9 x 9.7 mm) Field Install: Monitoring Outputs Timers Top Jamb Kits Glass Door Kits Common Configurations (Alum. Finish) 7V Single EmLock.00 7V-DPS Door Sensor V-BA Bond Sensor.00 7V-T Relock Timer.00 7V-BADPS Door/Bond Sensor V-TJV Top Jamb kit V-HDBV Glass Door kit.00 7V Double EmLock V-DPS Door Sensor V-BA Bond Sensor V-T Timer V-TJV Top Jamb kit V-HDBV Glass Door kit,0.00 Distributor and Installer Flexibility The modular design permits the addition of optional features, enabling standard locks to conform to any applications. EZ Mount Interlocking Feature Captive Mounting Screw Watts Power Saver Interlocking EZ Mount Assembly Adjustable Mounting Bracket Self Tapping Screws View the animated presentation and see how easy SDC EmLock installation is at 80 Series Grade 0 lb / 9 Kg Holding Force Electrical Specifications Voltage: /VDC Voltage Sensing Input Single: VDC; VDC Double: VDC; VDC Mechanical Specifications Single: 8.7" L x." H x." D (. x x.8 mm) Double: 7." L x." H x." D (. x x.8 mm) Common Configurations (Alum. Finish) 8V Single EmLock V-DPS Door Sensor.00 8V-BA Bond Sensor V-BADPS Door/Bond Sensor.00 8V-TJ8V Top Jamb kit V-HDBV Glass Door kit V Double EmLock V-DPS Door Sensor V-BA Bond Sensor V-TJ8V Top Jamb kit V-HDBV Glass Door kit 9.00

33 EMLOCKS EMLock MEA Lifetime Warranty ANSI/BHMA A. Grade CSFM 77-0:00 City of New York SA See Modular Program price list when ordering separately for field upgrades. Different part numbers and pricing apply. T D EMLOCK MODELS GK LIST 0lb / 78 kg Holding Force, Automatic Voltage Sensing Input Single EmLock 9.00 Double EmLock Single EmLock, split armature for pair of doors.00 00lb / kg Holding Force, Automatic Voltage Sensing Input 7 Single EmLock.00 7 Double EmLock Single EmLock, split armature for pair of doors lb / 9 kg Holding Force, Automatic Voltage Sensing Input 8 Single EmLock Double EmLock 8.00 SPECIFY FINISH Anodized Finishes (Architectural Housing: Add 0.00 per foot to base) Adjustable timer. Built in field adj. 0-0 sec. re-lock delay. Specify one for single or double EmLocks (not available with 80 series) Door position sensor. Indicates door open and door closed. Specify two for double EMLocks (not available with and 7) SPDT Dry, 0 0VDC. Single EmLock Double Emlock V 8 Aluminum (standard) N/C N/C X Dark bronze Y Black Plated Finishes (Architectural Housing: Consult Factory) C 0 Bright brass D 0 Dull brass F Bright bronze G Dull bronze P Bright chrome Q Dull chrome SPECIFY OPTIONS B Magnetic bond sensor. Indicates locked with full holding power and unlocked, low holding power, low voltage, tampering and obstruction between armature and magnetic core. Specify () for double EmLocks (Not available with and 7) 0 & 70 Series: SPDT Dry, 0 0VDC. 80 Series: SPST N.O., Dry, 0 0VDC L Tri-color status LED indicator. Field selectable Red, Green, Amber. Indicates lock energized when wired to lock input. Indicates de-energized/unlocked or Enter/Go when wired to built-in TD Module Indicates energized and de-energized or Enter/Go when wired to access control auxiliary output. Indicates door is closed and locked and door is unlocked when wired to BA..00 A Anti-tamper sensor. Indicates access cover removal. SPDT Dry, 0VDC 0.00

34 SPECIFY TOP JAMB MOUNTING BRACKETS GK Kits for 00lb and 0 lb Locks TJ Single TJ Double 9.00 Kits for 0lb Locks TJ8 Single TJ8 Double 9.00 Anodized Finishes Single Top Double Top Jamb Jamb V 8 Aluminum (std) N/C X Dark Bronze Y Black Plated Finishes C 0 Bright Brass D 0 Dull Brass F Bright Bronze G Dull Bronze P Bright Chrome Q Dull Chrome SPECIFY GLASS DOOR MOUNTING KIT Single Door Housing 0 0" Lock housing.00 " Lock housing " Lock housing " Lock housing.00 CH Custom length. Specify exact length POA Double Door Housing 0 0" Lock housing " Lock housing " Lock housing " Lock housing CH Custom length. Specify exact length POA Vertical Housings GK Universal glass door kits are compatible with lock models, except and 7 Field adjustable for /", /8" and /" all glass Herculite doors Kits for, 7, 8 HDB Single Kits for, 7, 8 HDB Double, single kits 0.00 Anodized Finishes Single Double V 8 Aluminum (std) N/C X Dark Bronze Y Black Plated Finishes C 0 Bright Brass D 0 Dull Brass F Bright Bronze G Dull Bronze P Bright Chrome Q Dull Chrome SPECIFY ARCHITECTURAL HOUSINGS GK Full Width Housings - appear as part of the frame to provide a superior architectural appearance. Vertical Housings - Side jamb mount, accommodates two 7 or two EMLocks providing 00 or 00 lbs of holding force. Compatible with Models:,, 7, 7 with or without HDB kits. Specify housings with your EMLocks. 8 8" high opening CV Custom length. Specify exact length POA See page for special finish designation and finish price DRILL FIXTURE LIST NEW DF Heavy duty drill fixture for 7 and DF Heavy duty drill fixture for BN-PT Blind Nut Placement Tool 0.00 BN-0 Blind Nuts, 0/, 0 Pack 0.00

35 UNIVERSAL HEADER BRACKET GK Used in lieu of angle brackets, the Universal Header Bracket provides a faster mounting solution, saving time and labor costs for several EmLock models. Reduce potential for mis-sized and misaligned mounting holes, broken taps, removal of broken taps. Combined with interlocking E-Z mount assembly, save up to a half days labor with the installation of locks. Features Solid " bar provides higher security and superior aesthetics. Machined wire chase provides concealed and secure wiring Multiple pre-drilled and tapped mounting holes to accommodate the use of several different locks on either " or." aluminum frames " FRAME." FRAME UB Bracket for,, 7, 7. Dimensions: " x " x ".00 UB Bracket for and 7. Dimensions: " x " x " 8.00 Machined Wire Chase SPECIFY FINISH Holes Pre drilled & Countersunk For Frame Mounting Pre drilled and Tapped Lock Mounting Holes ALUMINUM SPACER BRACKET & CONCRETE PLATE - PRE DRILLED & TAPPED GK LIST UFV UF8V Aluminum frame with /" blade stop Application NEW Aluminum frames with blade stop - lowers EmLock below blade stop Concrete filled hollow metal frames - provides multiple points for concealed wire entry Features Pre-drilled and tapped specifically for 0, 70, 80 EmLock Machined wire chase provides multiple points for concealed wire entry from concrete filled frames. UFV Bracket for,, 7, 7. Dimensions: /" x -/" x " UFV Bracket for and 7. Dimensions: /" x -/" x ".00 UF8V Bracket for 8. Dimensions: /" x -/" x 8-/" 7.00 UF8V Bracket for 8. Dimensions: /" x -/" x 7-/" ARMATURE MOUNTING PLATE GK LIST ARV Hollow metal concrete filled frame V 8 Aluminum (standard) N/C C 0 Bright Brass D 0 Dull Brass F Bright Bronze G Dull Bronze 0.00 P Bright Chrome Q Dull Chrome X Dark Bronze Y Black 0.00 The AR Mounting plate provides a solution for mounting the EmLock armature to the top rail of aluminum, glass, wood and hollow metal doors that do not permit the use of thru bolts. ARV Armature mounting plate for, 7 Specify two for models, 7 NEW 0.00 NEW Glass Door Top Rail Wood Or Metal Door Lock Glass Armature Mounting Plate 7

36 FILLER PLATES GK ANGLE BRACKETS GK B A B A " mm " mm " mm /" 9mm FILLER PLATES: For extension of the stop to provide a proper mounting surface on the underside of the header See Figure B. FOR 8-/" (mm) SINGLE EMLOCK MODELS GK 8, 0V8S, 0A8S, 0V8T, 0A8T PART # A x B LIST FP0 /8" x -/" ( x mm) 0.00 FP0 /" x -/" ( x mm).00 FP0 /8" x -/" (0 x mm).00 FP0 /" x -/" ( x mm).00 FP0 /8" x -/" ( x mm).00 FOR " (79mm) SINGLE EMLOCK MODELS S 0A7S 0V7S 7 T 0A7T 0V7T PART # A x B LIST FP /8" x -/" ( x mm).00 FP /" x -/" ( x mm).00 FP /8" x -/" (0 x mm).00 FP /" x -/" ( x mm) 8.00 FP /8" x -/" ( x mm) 0.00 FOR 7-/" (mm) DOUBLE EMLOCK MODEL 8 PART # A x B LIST FP0 /8" x -/" ( x mm) 8.00 FP /" x -/" ( x mm) 0.00 FP /8" x -/" (0 x mm).00 FP /" x -/" ( x mm).00 FP /8" x -/" ( x mm).00 FOR " (9mm) DOUBLE EMLOCK MODELS 7 D PART # A x B LIST FP /8" x -/" ( x mm) 8.00 FP /" x -/" ( x mm) 0.00 FP /8" x -/" (0 x mm).00 FP /" x -/" ( x mm).00 FP /8" x -/" ( x mm).00 /" 9mm /" 9mm ANGLE BRACKETS: Used as extension on shallow door frames to provide adequate mounting surface. See Figure C. FOR 8-/" (mm) SINGLE EMLOCK MODELS GK 8, 0V8S, 0A8S, 0V8T, 0A8T PART # A x B LIST AB0 " x " ( x mm) 8.00 AB0 " x -/" ( x 8mm) 0.00 AB0 -/" x -/" (8 x 8mm).00 AB0 " x -/" ( x 8mm).00 FOR " (79mm) SINGLE EMLOCK MODELS S 0A7S 0V7S 7 T 0A7T 0V7T PART # A x B LIST AB " x " ( x mm) 0.00 AB " x -/" ( x 8mm).00 AB -/" x -/" (8 x 8mm).00 AB " x -/" ( x 8mm).00 FOR 7-/" (mm) DOUBLE EMLOCK MODEL 8 PART # A x B LIST AB0 " x " ( x mm) 0.00 AB " x -/" ( x 8mm).00 AB -/" x -/" (8 x 8mm) 8.00 AB " x -/" ( x 8mm).00 FOR " (9mm) DOUBLE EMLOCK MODELS 7 D PART # A x B LIST AB " x " ( x mm) 0.00 AB " x -/" ( x 8mm).00 AB -/" x -/" (8 x 8mm) 8.00 AB " x -/" ( x 8mm).00 SPECIFY FINISH Single EmLock Double EmLock V 8 Aluminum (standard) N/C N/C Special Finishes C 0 Bright Brass D 0 Dull Brass F Bright Bronze G Dull Bronze P Bright Chrome Q Dull Chrome X Dark Bronze Y Black

37 GATE EMLOCK GK Holding Power 00lbs. Specify Voltage: or VDC VDC or VDC) Finish: N Nickle Plated Stainless Steel finish (standard) Dimentions: 9-/"L x -/"H x -/"D MODEL DESCRIPTION LIST 7N Single EMLock VDC with /" x /" conduit fitting N Single EMLock VDC with /" x /" conduit fitting N Single EMLock VDC face drilled mounting holes with /" x /" conduit fitting N Single EMLock VDC face drilled mounting holes with /" x /" conduit fitting NEW MODEL DESCRIPTION LIST 7-BK Mounting Bracket for MP Mounting Plate for MICRO CABINET EMLOCK GK Holding Power 00lbs. Dual voltage: 00/0 / VDC Dimensions: Lock -/"L x -/8"W x -/"H Armature -/8"L x -/8"W x /"H MODEL DESCRIPTION LIST 8V Micro EMLock for cabinets, drawers and lockers MORTISE EMLOCK GK BK 7-MP 8 ACCESSORIES Holding Power 80lbs. Specify Voltage: or VDC VDC, VDC) Finish: V 8 Aluminum Anodized (standard) Dimensions: 0"L x -7/"H x -/"D MODEL DESCRIPTION LIST 9 Single EMLock for sliding doors 0.00 ACCESSORIES LAB Surface mount armature angle bracket for 9 on sliding doors 8.00 AMP Armature mounting plate for leading edge of door 0.00 DPS Door position sensor for 9 EMLock

38 HI/SHEAR EMLOCK GK EMLock Lifetime Warranty GWXT Auxiliary Locks CVXJ Burglary Resistant Electrically Operated Door Lock UL0C Positive Pressure Compliant UBC Classified in accordance with Uniform Building Code standard 7- Fire Test for Door Assemblies HTR WDRB Features Door static and relock sensor, detects door is closed, at rest and aligned before relocking Automatic voltage sensing input Lateral and vertical alignment adjustment Floating armature with alloy steel shear tabs CONCEALED HI/Shear EMLock Electrical Specifications and : 0/0 /VDC Auto-Sensing and : 800/00 /VDC Auto-Sensing 000 Lbs Holding Force, 8" x -/" Lock -/8" depth, integrated electronics for -/" to " frames /" depth, with external electronics, for -/" to -/" frames Lbs Holding Force, 0-7/" x -/" Lock -/8" D depth, integrated electronics, for -/" to " frames /" D depth, external electronics, for -/" to -/" frames ITC Standard mounting armature kit for aluminum and hollow metal doors with 7/8" to -/8" deep top channels, wood doors and factory prepared hollow metal flush edge doors. FTC Mounting kit for field prepared horizontal mounting in hollow metal doors with flush edge. N/C HTC Mounting kit for -/" deep herculite channels N/C HTR Herculite top rail armature adjustment bracket for leading edge adjustments BAS DPS- L- SPECIFY ARMATURE Armature supplied with lock. Specify type required: / ITC, FTC or HTC / ITCM, FTCM or HTCM OPTIONS Bond sensor indicates proper armature contact and reduced holding power due to improper armature contact or tampering. SPDT 0. Amp maximum (not available on and ) Door position switch indicates door open or closed. SPDT 0. Amp maximum. External LED status indicator, mounts separately through the frame and may be used to indicate lock is energized or wired to BAS bond sensor for door status. List N/C 0.00 WDRB Wood door reinforcement box for and 0.00 WDRBM Wood door reinforcement box for and

39 HI/SHEAR EMLOCK GK EMLock MEA Lifetime Warranty ANSI/BHMA A. Grade CSFM 77-0:00 City of New York SA SC SCHDB S TJ SEMI CONCEALED HI/SHEAR LOCKS 000 Lbs Holding Force, 8" x -/" x -/" Lock SC -/" depth, with external electronics, for -/" to -/ For Hollow metal frames SCHDB/ -/" depth, with external electronics, for -/" to -/" frames For /" Herculite full glass doors SCHDB/ -/" depth, with external electronics, for -/" to -/" frames For /" Herculite full glass doors. SURFACE MOUNT HI/SHEAR LOCKS 80.00,000.00, Lbs Holding Force, 8" x -/8" x -/" Lock For Hollow metal frames and wood or hollow metal doors S Surface mount for the push side of the door with integrated electronics TJ Surface top jamb mount for the pull side of the door with integrated electronics STANDARD FINISH Surface housing V 8 Anodized Aluminum N/C BAS DPS- L- OPTIONS Bond sensor indicates proper armature contact and reduced holding power due to improper armature contact or tampering. SPDT 0. Amp maximum (not available on and ) Door position switch indicates door open or closed. SPDT 0. Amp maximum. External LED status indicator, mounts separately through the frame and may be used to indicate lock is energized or wired to BAS bond sensor for door status. List List

40 EXIT CHECK DELAYED EGRESS LOCK GKK S / T VOICE & DIGITAL Annunciation FIELD SELECTABLE ACTUATION 0 lbs Holding Force Standard The Exit Check S series incorporates an Door Movement 80/0 /VDC (single) alternating 8 db tone and voice message Exit Sense Bar NEW 00 lbs Energy Saver Option E with a digital countdown display and sign Exit Device Switch Kit (See page ) 80/ /VDC (single) that provides clear and comprehensive instructions for persons without prior knowledge of Latch Monitoring Strike (See page ) Control more locks with fewer power supplies Save on electricity consumption and power door operation. This is especially significant for supply investment those who are blind or hearing impaired. SINGLE MODEL TANDEM MODEL DOUBLE MODEL POA Consult Factory For use with single doors equipped with Exit Sense Bars, surface vertical rod, concealed vertical rod, mortise and rim mount exit devices, mortise locksets and cylindrical locksets. S ELECTRICAL SPECIFICATIONS Input Voltage: Auto Voltage Sensing /VDC ± 0% Standard 0 lbs holding force S 80/0 /VDC T 00/80 /VDC Energy Saver E Option 00 lbs Holding Force S 00/7 /VDC T 0/00 /VDC STANDARD DELAYED EGRESS MODEL NUMBERS For use with pairs of doors equipped with Exit Sense Bars, surface mounted vertical rod exit devices and concealed vertical rod exit devices with surface mounted triggers and strikes. Activating either door unlocks both doors. CONTROL INPUTS T Request to Exit: Normally open, dry Fire Alarm Release: Alarm panel closed dry contact. Opening of contact releases lock. MONITORING OUTPUTS Alarm Output: SPDT Dry, 0VDC Lock Secure / Unlocked Output: SPDT Dry, 0VDC DPS Door Position Status: (option) SPDT Dry, 0 0VDC BAS Magnetic Bond Status: (option) SPDT Dry, 0 0VDC ATS Anti Tamper Sensor: (option) SPDT Dry, 0VDC For use with pairs of doors equipped with Exit Sense Bars, mortise, rim and concealed vertical rod exit device with concealed strikes and triggers, mortise locksets and cylindrical locksets. Activating either door unlocks both doors. D DIMENSIONS Single: L x / H x / 8 D (79 L x 70 H x 7 D mm) Tandem: Master: L x / H x / 8 D (79 L x 70 H x 7 D) Slave: L x / H x / 8 D (79 L x 70 H x x 7 D mm) Armature: 7 / 8 L x / 8 H x 9 / D (87 L x 0 H x D mm) Sign: L x / H (0 L x H mm) UBC, SBC, IBC, IFC, NFPA 0, NFPA -UFC, California Building Code/OSHPD* Compliant BOCA Compliant Chicago Compliant S ND K V Single T ND K V Tandem NEW Voice & Digital Display Standard Energy Saver Optional S BD K V Single T BD K V Tandem S CD K V Single T CD K V Tandem *Office of Statewide Health Planning & Development (California)

41 EXIT CHECK DELAYED EGRESS LOCK GKK FWAX Special Locking Arrangements GWXT Auxiliary Locks UL0C Positive Pressure Compliant UBC Classified in accordance with Uniform Building Code standard 7- Fire Test for Door Assemblies ANSI/BHMA A. Grade CSFM 77-0:0 70-R 0-AM PT- S NEW Voice & Digital Display Standard Energy Saver Optional RCC 0-A Controls & Annunciators See page 8 TCC 98 Annunciator Consoles See page MS- Accessories See page & SPECIFY MODEL S Single - Voice, tone and digital countdown annunciator, 0 lbs T Tandem - Voice, tone and digital countdown annunciator, 0 lbs 0.00 ND NH SPECIFY OPERATION UBC, California Building Code OSHPD, NFPA 0, NFPA -UFC, SBC, IBC, IFC Compliant second fixed exit delay, adjustable 0,,,, second nuisance delay NFPA 0, NFPA - UFC, SBC, IBC, IFC Compliant 0 second fixed exit delay, adjustable 0,,,, second nuisance delay NA NFPA, UFC, SBC, IBC, IFC Compliant or 0 sec. adjustable exit delay, adjustable 0,, or sec. nuisance delay, built in or remote manual reset. BD BOCA National Building Code Compliant second fixed exit delay, second nuisance delay, auto reset 0 second after door closure* * seconds when AHJ approved. CD Chicago Building Code Compliant. Contains no moving parts. sec. fixed exit delay, sec. nuisance delay, auto reset 0 secs after door closure. SPECIFY BUILT IN RESET & CONTROL K Built in key switch. Provides -0 second timed bypass, sustained bypass and alarm reset (std) N/C Built in reset not available with BOCA and Chicago operation. P Built in reset push switch. Available with NFPA (NA) only. N/C L Less key or push switch (no price deduction) N/C SPECIFY FINISH OPTIONS LIST N/C N/C N/C N/C N/C Anodized Finishes Single Tandem V 8 Aluminum (standard) N/C N/C X Dark Bronze Y Black Special Plated Finishes C 0 Bright Brass G Dull Bronze D 0 Dull Brass P Bright Chrome F Bright Bronze Q Dull Chrome E Energy Saver, 00 lbs holding force, low power consumption, electrical specs page N/C D Door position status. Provides remote monitoring of the door open or closed status and indicates the 0.00 door has actually been opened for egress after alarm activation. Specify for tandem and double B Magnetic bond alert sensor. Indicates locked or unlocked, reduced holding power, tampering or foreign material between the electromagnet and armature. Specify for tandem and double A Anti-tamper switch. Detects attempt to remove the access cover. Specify for tandem 0.00 VI Spanish, or English and Spanish, or English and French verbal announcement VIC Custom verbal announcement (0 piece purchase minimum) POA Sure Exit Push Bar See page 0

42 EXIT CHECK MINI DELAYED EGRESS EMLOCK GKK LIST 8S Single Mini Delayed Egress Lock 0lbs holding force 9.00 Specify for pairs of doors Remote reset control required. See below. 8S SPECIFY OPERATION ND UBC, California Building Code/OSHPD, NFPA 0, NFPA -UFC, SBC, IBC, IFC Compliant second fixed exit delay, second nuisance delay N/C FWAX Special Locking Arrangements GWXT Auxiliary Locks ANSI/BHMA A. Grade R CSFM 77-0:0 0-AM 0-AK NH BD BH NFPA 0, NFPA - UFC, SBC, IBC, IFC Compliant 0 second fixed exit delay, second nuisance delay BOCA National Building Code Compliant second fixed exit delay, second nuisance delay, auto reset 0 second after door closure BOCA National Building Code Compliant 0 second fixed exit delay, second nuisance delay, auto reset 0 second after door closure SPECIFY FINISH Anodized Finishes V 8 Clear Anodized Aluminum (standard) N/C X Dark Bronze Anodized 8.00 Y Black Anodized 8.00 N/C N/C N/C Special Plated Finishes C 0 Bright Brass G Dull Bronze D 0 Dull Brass P Bright Chrome F Bright Bronze Q Dull Chrome SPECIFY OPTIONAL OUTPUT D Door position status 0.00 B Magnetic bond sensor SPECIFY CABLE FOR DOUBLE DOORS Select Reset Station for ND and NH functions Reset not required for BD and BH function 98 EntryCheck digital keypad, 80 user codes Keyless Reset / manual power up / bypass Required when using two locks on a pair of doors, cables enable slave operation. TC- Cable kit for connecting two locks through the frame header 0.00 TC-0 Cable kit for connecting wiring for two locks in a remote junction box.00 SPECIFY STATION CONTROLS Key switch, keys, gang 0.00 Reset / manual power up / sustained bypass 78L Key switch, keys, gang, LED status indicator 8.00 Reset / manual power up / sustained bypass 70R Key switch assembly, gang, less cylinder 9.00 Reset / manual power up / momentary bypass 0-AK Key switch assembly, gang, LED status indicator, less cylinder Reset / manual power up / sustained bypass AM Four station remote annunciator 90.00

43 0V EXIT CHECK WALL MOUNT DELAYED EGRESS - NFPA 0 LOCKING ARRANGEMENTS GKK Proprietary Verbal Exit Instructions with Alarm Tone and " Digital Countdown Display Standard features include: /VDC voltage sensing input, delay electronics packaged on a two-gang wall plate for recessed wall mounting and junction box for surface wall mounting. Features include: Key switch for violation reset, momentary bypass and on-off; status outputs, remote control inputs. Security Industry Finest ISC Expo TM Choice of door movement sensor activation or manual activation by non-latching REX bar. Doors WITH latch assemblies are sensor activated and do not require power transfer or trigger switch in exit device. Where preferred a trigger switch may be added to the exit device for manual activation in lieu of door movement activation. Doors WITHOUT latches require a non-latching Request-to-Exit Bar PSB0 Sure Exit or MSB0 Switch Bar (page 0) Power transfer device PT- armored loop or PTH- power transfer hinge (page ). Standard monitoring outputs indicate lock energized, lock de-energized, exit in progress and authorized egress. 0V8S 0V8T FWAX Special Locking Arrangements GWXT Auxiliary Locks CSFM 77-0:0 SPECIFY BASE MODEL Mini Delayed Egress - 0lbs holding force 0V8S Single, 0/0mA@ /VDC V8T Tandem,.A/0 /VDC Two separate EmLocks for pairs of doors. Pushing either door unlocks both doors..00 POWER SAVER Delayed Egress - 00lbs holding force 0V7S Single, 00lbs holding force, /VDC.00 0V7T Tandem, 00lbs holding force, /VDC Two separate EmLocks for pairs of doors. Pushing either door unlocks both doors ND NH BD BH SPECIFY CODE COMPLIANT EXIT DELAY MODE UBC, California Building Code/OSHPD, NFPA, UFC, SBC, IBC, IFC Compliant Fixed second exit delay, adjustable 0,, or second nuisance delay NFPA 0, NFPA -UFC, SBC, IBC, IFC Compliant Fixed 0 second exit delay, adjustable 0,, or second nuisance delay BOCA National Building Code Compliant Fixed second exit delay, second nuisance delay Auto reset 0 seconds after door closure BOCA National Building Code Compliant 0 sec. fixed exit delay, sec. nuisance delay, auto reset 0 sec. after door closure SPECIFY FINISH OPTIONS LIST V 8 Clear Anodized Aluminum (Standard) N/C X Dark Bronze Anodized Single.00 Tandem 8.00 N/C N/C N/C N/C B Magnetic bond sensor, indicates locked with full holding force, low holding force, unlocked, tampering and obstructions. Specify two for tandem Exit Check D Door position sensor, indicates door open and door close. Commonly used to verify egress after alarm and exit delay activation. Specify two for tandem Exit Check 0.00 VI Spanish, or English and Spanish, or English and French verbal announcement* VIC Custom verbal announcement (minimum 0 piece purchase) POA ANSI/BHMA A. Grade Electrical Specifications Voltage input: Auto sensing /VDC Reset input: NO, Dry REX input: NO, Dry Alarm Output: 0VDC Energized Status Output: 0VDC Mechanical Specifications Controller:." x." x." 0lb Emlock : 8.7" x." x." 00lb Emlock : " x.7" x."

44 000 SERIES EXIT CHECK DELAYED EGRESS EXIT DEVICES GKK DE00 Rim Mount Features Multiple device networking to reset, arm, alarm and disarm all devices from any device on the same circuit Built-in annunciation, 8db tone and LED indicates armed, alarm, authorized access and bypass Emergency Release Input UBC & California (OSHPD) compliant manual power up Built-in keyswitch for reset, bypass & request-to-exit Remote reset, bypass, access control, REX & input Remote alarm output DE00 Mortise DE00 Wood Concealed DE00 Concealed Special Locking Arrangement Choice of UL Listed Panic or Fire Exit Device Complies with UL0C and UBC 7- ANSI/BHMA A. Grade Compliant Delayed Egress Specifications Voltage Input: 00 VDC Door sequencing is not required Alarm output: SPDT 0VDC Secure Output: SPDT 0VDC SPECIFY DEVICE TYPE DE Rim mount exit device 8.00 DE Mortise exit device DE Wood door concealed vertical rod exit device.00 DE Concealed vertical rod exit device Priced less key cylinder. See page 7 Consult factory for special strike requirements SPECIFY FUNCTION 0 Exit Only, No Lever Trim N/C For Dummy Trim with Key Latch retraction ( NL Function ) N/C For Active Trim with Key Latch retraction ( NL Function ) N/C SPECIFY PANIC OR FIRE RATED 0 Panic exit device N/C Fire exit device 0.00 SPECIFY LENGTH For " Door N/C For " Door N/C 8 For 8" Door N/C SPECIFY HAND R Right hand reverse bevel, RHRB N/C L Left hand reverse bevel, LHRB N/C SPECIFY TRIM E Eclipse ED Eclipse Dummy G Galaxy GD Galaxy Dummy Electric Trim Option Input: 00 VDC Output: SPDT 0VDC locked/unlocked status standard with E option N Nova ND Nova Dummy LIST SPECIFY FINISH U 0 Dull Stainless Steel Q Dull Chrome D 0 Dull Brass N/C G Dull Bronze H Oil Rubbed Bronze V 8 Clear Anodized Aluminum N/C C 0 Bright Brass P Bright Chrome.00

45 SPECIFY D.E. OPERATION GKK LIST 98 0-AM 0RF PT- ND NH BD BH Access Control UBC, California Building Code, NFPA 0, NFPA /UFC, SBC, IBC, IFC Compliant sec. fixed exit delay, adj. 0,,,, sec. nuisance delay UBC and California (OSHPD) compliant manual power up feature NFPA 0, NFPA - UFC, SBC, IBC, IFC Compliant 0 sec. fixed exit delay, adj. 0,,,, sec. nuisance delay BOCA National Building Code Compliant sec. fixed exit delay, sec. nuisance delay, auto reset 0 sec. after door closure BOCA National Building Code Compliant 0 sec. fixed exit delay, sec. nuisance delay, auto reset 0 sec. after door closure SPECIFY ELECTRIC OPTIONS E Electric Device Lock/Unlock. Exterior access control capability locks and unlocks outside trim, failsecure standard, field reversible for failsafe operation. Input: 00 VDC Output: SPDT 0VDC locked/unlocked status standard with E option Monitoring N/C N/C N/C N/C 8.00 L Latchbolt status output, SPDT,. 0VDC POA SPECIFY POWER SUPPLY FOR UL COMPLIANCE Power Supply Capacity Door sequencing is not required Less E Option With E Option 0RF Amp /VDC Class power supply max max RF Amp /VDC Class power supply max max See page for battery backup, options and door control modules KEY CYLINDERS SPECIFY POWER TRANSFER DEVICE PT- PTH-Q PTH-0Q Stainless steel armored power transfer loop with aluminum termination box (Special finish not available) wire power transfer hinge: -pair Amp; -pair 0 ma (specify finish below) UL0B Listed for use with up to hour fire rated doors 0 wire power transfer hinge: -pair Amp; -pair 0 ma (specify finish below) UL0B Listed for use with up to hour fire rated doors Required for applications with remote status outputs or remote control inputs Two key cylinders may be required for each exit device. Key cylinders may be provided by SDC or by others. All Exit Devices require at least one (-/8") Mortise Key Cylinder for electronic operation of alarm reset, momentary bypass and sustained bypass. A second key cylinder is required with Dummy and Active Trim Functions and for exterior mechanical key operation Exit Only Function 0 does not require a mechanical key cylinder on the exterior CYL-PKD pin mortise cylinder, keys, keyed different, -/8". For mortise device 0.00 RIM-PKD pin rim cylinder, keys, keyed different. For rim and vertical rod devices 0.00 Keyed Alike POA List List List PTH See details page REMOTE KEYPAD AND ANNUNCIATION List 98 EntryCheck digital keypad. Provides keyless reset, manual power up and bypass A One Station remote annunciator AM Four station remote annunciator 0.00 See page for more details about remote desk top control consoles See page 8 for more details about remote wall mount annunciators 7

46 LOCAL AND REMOTE CONTROLS AND ANNUNCIATORS CK LIST 98 Keyless Reset and Bypass or Momentary Authorized Access 80 User Codes JK R- 0-A 0-AM 707R- 708R- 0-PAM ACCESSORIES FOR DELAYED EGRESS SYSTEMS The following items are optional components for an integrated Delayed Egress System or Wall mount Delayed Egress Systems PTH- See details Page PSB0 MSB0 70R- Separate wall mount reset key switch assembly Accepts standard -/8'' to -/'' (Mortise key cylinder not included) 707R- Remote reset key switch with dual function for Bypass (authorized egress) and reset () MO SPDT dry contact, 0VDC max Accepts standard -/8'' to -/'' mortise key cylinder. (Mortise key cylinder not included) 708R- Remote reset key switch for bypass (on/off) and reset () Maintain () MO, SPDT dry contact, 0VDC max Accepts standard -/8'' to -/'' mortise key cylinder. (Mortise key cylinder not included) 0-A Remote or local single door annunciator with audible alarm and tri-color LED, Gang Green Secure Amber - egress initiated Red - door unlocked 0-AM 0-AK 0-PAM Remote four door annunciator with audible alarm mute button. Four tri-color LEDs, Gang Green Secure Amber - egress initiated Red - door unlocked Remote or local single door annunciator with function key switch for on/off, reset, audible alarm and tri-color LED, Gang Green - secure Amber - egress initiated Red - door unlocked Accepts standard -/8'' to -/'' mortise key cylinder. (Mortise key cylinder not included) Remote single door annunciator with push button switches for momentary access. On/off and audible alarm mute button with tri-color LED, Gang Green - secure Amber - egress initiated Red - door unlocked Recommended for remote installation only PTH-Q PTH-Q-DPS PTH-0Q PTH-0Q-DPS PSB0V Four () Conductor Power Transfer Hinge 8 gauge - -pair Amp, -pair 0 ma. x. standard weight, Dull Chrome Four () Conductor Power Transfer Hinge with Door Status Contact 8 gauge - -pair Amp, -pair 0 /V AC/DC Door Status Contact: 0 0VDC. x. standard weight, Dull Chrome Ten (0) Conductor Power Transfer Hinge 0 gauge - -pair Amp, -pair 0 ma. x. standard weight, Dull Chrome Ten (0) Conductor Power Transfer Hinge with Door Status Contact 0 gauge - -pair Amp, -pair 0 ma Door Status Contact: 0 0VDC. x. standard weight, Dull Chrome Sure Exit sense bar, less latch assembly Required for doors without latch assembly. Aluminum Finish LIST 0.00 MSB0-V Switch bar with SPDT switches, Aluminum Finish GL KIT Glass door mounting kit for PSB0, MSB PT- PT-U Armored flex conduit (less wires) 8.00 PT-V Armored flex conduit (less wires) with the wire junction box.00 MC- Door position switch.00 PT- MC- 8

47 9

48 0 SERIES ELECTRIC STRIKES FK Series 0 ANSI Grade Electric Strike, failsecure standard Specify Voltage: VDC or VDC. Current Draw: 0.0 Amp, 0. Amp. Standard finish: U 0 Stainless steel How to Specify: Model Voltage Finish Option -A U LCM SPECIFY MODEL LIST -A Cylindrical locks, narrow style locks with deadlatch.00 -A -D -E -D -E -B -C -F -F -B Mortise locks and mortise panic with or without deadlatch C Mortise locks and mortise panic with or without deadlatch (Schlage, Sargent, Yale) -D Mortise locks with deadbolt and latchbolt. When the deadbolt is projected, the strike will not release. Keeper releases latchbolt when deadbolt is retracted. -E Mortise locks with deadbolt and latchbolt. When the deadbolt is projected, the strike will not release. Keeper releases latchbolt when deadbolt is retracted. (Schlage and Yale) -F Mortise locks with deadbolt, center deadlatch feature and latchbolt. When the deadbolt is projected, the strike will not release. Keeper releases latchbolt when deadbolt is retracted. (Schlage, Sargent 800, Yale) D Mortise locks with latchbolt and extended deadbolt. Deadbolt and latchbolt are released F Mortise locks with deadlatch, latchbold and extended deadbolt. Deadbolt and latchbolt are released. (Schlage, Sargent, Yale) SPECIFY FINISH OPTIONS 7.00 U 0 Dull Stainless Steel Standard N/C Special Finishes C 0 Bright Brass H Oil Rubbed Bronze Functions A, E & F Add $8.00 D 0 Dull Brass P Bright Chrome F Bright Bronze Q Dull Chrome G Dull Bronze S 9 Bright Stainless Steel Functions B, C & D Add $.00 FS Failsafe operation (locked when powered) 0.00 LCM Switch monitors locked, unlocked status.00 LBM Latchbolt monitor switch.00 LCMLBM Locking CAM and latchbolt monitoring switches LCBDM Latchbolt, deadbolt and CAM monitoring switches.00 BRXL Rectifier CK 0.00 MT-S Mounting tabs 0.00 BRXL 0 MT-S

49 0 SERIES ELECTRIC STRIKES FK Stainless steel electric strike for bored locks, mortise locks or mortise exit devices having /'' or /8'' latchbolts (without deadbolts) or rim-type exit devices. Strike is non-handed, fail secure is standard with fail safe optional. Standard finish is stainless steel 0 (U). SPECIFY MODEL LIST NOTE: On retrofit applications, modification of the frame preparation may be required, consult factory Stainless steel electric strike for bored locks, mortise locks or mortise exit devices having /" or /8" latchbolts (without deadbolts) - VDC@0.Amp 0-- Stainless steel electric strike for bored locks, mortise locks or mortise exit devices having /" or /8" latchbolts (without deadbolts) - VDC@0.Amp Stainless steel electric strike designed for rim-type exit devices VDC@ 0.Amp Stainless steel electric strike designed for rim-type exit devices VDC@ 0.Amp.00 SPECIFY FINISH U Dull Stainless Steel (standard) N/C D 0 Dull brass 0.00 H Oil rubbed bronze 0.00 G Dull bronze 0.00 P Bright chrome 0.00 OPTIONS FS Failsafe operation (locked when powered) Not for use on fire doors, Non UL.00 LCM-0 Locking cam monitor.00 LBM-0 Latchbolt monitor.00 BRXL Rectifier CK SERIES ELECTRIC STRIKES FK Stainless steel electric strike for use with bored locks, mortise locks and mortise exit devices having / (9mm) throw latch bolts. Fits standard -7/8 (mm) cutout with modification. Fail secure is standard and fail safe is optional. Standard finish is stainless steel 0 (U). SPECIFY MODEL 70-- Stainless steel electric strike designed for hollow metal frames 0.9 Amp Stainless steel electric strike designed for hollow metal frames 0. Amp Stainless steel electric strike designed for wood frame or double doors 0.9 Amp 70-- Stainless steel electric strike designed for wood frame or double doors 0. Amp SPECIFY FINISH LIST U 0 Dull Chrome (Standard) N/C P Bright Chrome 0.00 D 0 Dull Brass 0.00 Q Dull Chrome 0.00 G Dull Bronze 0.00 S 9 Bright Stainless 0.00 H Oil Rubbed Bronze 0.00 OPTIONS FS Failsafe operation.00 AS Astragal.00 LCM-70 Locking car monitor.00 PC Plug connector.00 LBM-70 Latch bolt monitor.00 MT-S Mounting tabs.00 BRXL Rectifier CK 0.00 AS MT-S

50 TM POWER SUPPLIES/CONTROLLERS & BATTERY STANDBY 0RF and RF(A) tested according to UL Standard 8, listing includes: Access Control Systems Unit ALVY Burglar Alarm Systems Power Supply APHV Releasing Device Accessory SYSW Fire and Burglar Alarm Power Supply URTZ RF(A), RF and RF UL listed as: QQFU/QQFU7 General Purpose Power Supply NK Standard Features: Modular design Filtered and regulated output Field selectable /VDC Fire/Emergency release input Field selectable manual reset input ( n/a with RF(A) ) Input, output and battery LED status indicators Thermal and short circuit protection with auto reset Battery charger Low battery disconnect Security Industry Finest ISC Expo 0RF RF with optional power cord RFA RFA RF RF FIELD SELECTABLE VDC OR VDC OUTPUTS 0RF Amp class output ( outputs optional. See FB page ) RFCUL c UL Listed for Canada RF. Amp class output ( & 8 outputs optional. See FB page ).00 + RFA. Amp class output ( & 8 outputs optional. See FB page ) 7.00 RFCUL * c UL Listed for Canada RF Amp class output, (, 8 & outputs optional. See FB page ) RFA Amp class output, (, 8 & outputs optional. See FB page ) 0.00 RFCUL * c UL Listed for Canada + RF Amp; Field select one Amp output or two Amp class outputs (, 8, & outputs optional. See FB page ) + RF Amp; Field select one Amp output or three Amp class outputs (, 8,,, 0 & outputs optional. See FB page ) * C UL Listed Power Supplies include the specific LED & battery status outputs required for Canada Cabinet Dimensions:. W x. H x. D, 8 GA + W x H x. D, GA DUAL VDC AND VDC OUTPUT CAPABILITY VR RF RF RF RF MR OPTIONS 00mA, VDC regulated and filtered output module With the power supply output set at VDC for locking devices and components, the addition of the VR provides a separate VDC 00 ma output for access controls or other VDC devices One VR max. For 00 VDC and VDC Two VR max. Deduct 00 ma from VDC Amp output for each VR module Two VR max. Deduct 00 ma from VDC Amp output for each VR module Four VR max. Deduct 00 ma from VDC Amp output for each VR module Cover mounted manual reset switch for Fire/Emergency release (not available on RF) LIST 0.00 PS- System On-Off push switch inside power supply enclosure 0.00 PS-A System On-Off push switch on enclosure cover day - skip a day programmable timer. Automatically unlocks and locks all doors or specific doors on programmed days only. PC ft. power cord. Recommended for Amp and. Amp, eliminating the need for AC conduit KL Key lock cover.00 0V/0V 0VAC, 0/0Hz N/C 8.00 VR

51 TM MULTIPLE OUTPUT & DOOR CONTROL MODULE NK Cabinet Control Module Capacity ACM- CR CR- FB- LR PB TD UR FB- Security Industry Finest ISC Expo NEW ACM- CR CR TD UR-.x. Less batteries 0 With batteries 0 x Less batteries With batteries UNIVERSAL CONTROLLER & MANTRAP MODULES UR-A UR-A DOOR CONTROL MODULES Modules may be ordered with or without power supplies. Different function modules may be used in the same power supply or cabinet. Contacts:. Amps inductive, Amps 0VDC unless specified otherwise. FB- Fused terminal board. individually fused outputs 0.00 TD -0 second adjustable time delay. Fused SPDT voltage output, SPDT dry contact..00 ACM- Access Control Module. One SPDT voltage output, one SPDT status output, eight trigger inputs, (N/C, N/O), LED status indicator. CR Control Relay Module. Specify VDC or VDC. Fused SPDT voltage output 0.00 SPDT dry contact. CR NEW Control Board with four relays. Four fused SPDT field selectable wet or dry outputs,.00 four non-fused SPDT outputs, 0VDC, four dry contact trigger inputs. LR Latching relay module. Specify VDC or VDC. Fused SPDT voltage output 8.00 PB-8 PB- BATTERIES Universal Controller for doors. Field select TD, LR, TD/LR, mantrap A, B, C interlock. Two fused SPDT dry outputs, 0VDC. Two SPDT dry outputs, 0VDC. Two inputs per station, four auxiliary inputs. Universal Controller for doors. Field select TD, LR, CR, TD/LR, mantrap A, B interlock. Four fused SPDT dry outputs, 0VDC. Four SPDT dry outputs, 0VDC. Two inputs per station, four auxiliary inputs. Power booster for high inrush electric panic devices and locks. Amp VDC, 8 Amp surge output. Power booster for high inrush electric panic devices and locks. Amp VDC, Amp surge output. LIST LIST RBV V/AH Battery. Specify in pairs for V. 00RF above accommodates four..00 RVV7 V/7AH Battery. Specify in pairs for V. 00RFA above accommodates six 8.00 LIST LR RBV RBV7 PB-8

52 TRANSFORMERS V LIST TR Plug In. 0VAC primary, secondary screw terminals with ground terminal. Output : Fused unregulated 780 ma Output : Regulated 0 ma 8.00 TR TR TP0 TP0 TJ0 TB0/00 TR TP0 TP0 TJ0 TB0 TB00 Plug-in. 0 VAC primary, secondary screw terminals. VDC, Amp Plug-in. 0 VAC primary, secondary screw terminals fused. VAC,. Amp Plug-in. 0 VAC primary, secondary screw terminals fused. VAC,. Amp J Box or base mounted. 0 VAC primary wire leads, secondary screw terminals. VAC,. Amp Base mounted. 0/0 VAC primary, secondary screw terminals, replaceable secondary fuse. VAC, Amp Base mounted. 0/0VAC primary and secondary screw terminals, replaceable secondary fuse. VAC, Amp BRXL Bridge rectifier CK 0.00

53 POWER SUPPLY CAPACITY CHART EMLOCK ELECTROMAGNETIC LOCKS SINGLE DOUBLE,, 7 ENERGY SAVER 7 ENERGY SAVER 7, 7 8 SINGLE 8 DOUBLE VOLTS VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC AMPS.70A.A.0A.70A.A.A.80A.0A.A.A.0A.A.A.A.A.A.88A.A EXIT CHECK INTEGRATED DELAYED EGRESS EMLOCKS 8S S T S With (E) Energy Saver Option T With (E) Energy Saver Option VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC.0A.A.8A.A.A.9A.0A.7A.A.0A EXIT CHECK EMLOCK WITH WALL MOUNT CONTROLLER 0V7S ENERGY SAVER VDC.7A VDC.A 0V7T ENERGY SAVER VDC.7A VDC.7A 0V8S VDC.A VDC.A 0V8T VDC.0A VDC.A 0A7S ENERGY SAVER VDC.0A VDC.8A 0A7T ENERGY SAVER VDC.A VDC.0A 0A8S VDC.9A VDC.7A 0A8T VDC.0A VDC.9A EXIT CHECK DELAYED EGRESS EXIT DEVICE 0RF AMP RF. AMP 0 RFA. AMP 0 RF AMP RFA AMP VDC.0A N/A N/A N/A N/A 7 7 RF AMP RF AMP with E option VDC.70A N/A N/A N/A N/A See Electric Strikes, Electric Bolt Locks, Electrified Locksets Page

54 POWER SUPPLY CAPACITY CHART ( continued ) HITOWER ELECTRIC LOCKS VOLTS AMPS 0RF AMP RF. AMP RFA. AMP RF AMP RFA AMP RF AMP RF AMP 700 VDC VDC.0A.0A 700 FAIL SAFE VDC.0A FAIL SECURE VDC.80A VDC VDC SPACESAVER ELECTRIC BOLT LOCKS VDC 00,000, FS VDC.0A.0A.90A.A 00 VDC.0A 8 00 VDC VDC 000 VDC ELECTRIC STRIKES VDC VDC VDC VDC VDC VDC.90A.A A InRush.0A Cont..A.A.0A.A.9A.A X-PB * XPB * XPB * XPB-8 8 * XPB * XPB *8 XPB

55 KEY SWITCHES CK Key Cylinder sold separately: MO - Momentary AA - Alternate Action (on-off) Keyswitch assemblies compatible with. and. U.S. standard key cylinders. AMP KEY SWITCH ASSEMBLIES LIST 0 Guage Stainless Steel Faceplate Contacts Gang Narrow List Gang List N 700T 70 70N T 0.00 AA SPDT 70 70N T MO SPDT 70 70N T Timer SPDT 70 70N T 0.00 AA DPDT 70 70N T.00 MO DPDT N T.00 MO SPDT N 800T N T 0.00 MO SPDT & AA SPDT N T 0.00 AA SPDT 70 70N T Timer & AA SPDT 7 7N T 8.00 MO DPDT 7 7N T 8.00 MO DPDT & AA DPDT 7 7N T 8.00 AA DPDT 700-L /" Thick Aluminum Plate /" Thick Stainless Steel Plate Contacts Gang Narrow List Gang Narrow List Gang List 80AL 80ALN N.00 80T AA SPDT 80AL 80ALN N T MO SPDT 80AL 80ALN N T Timer SPDT 80AL 80ALN N T AA DPDT 80AL 80ALN N.00 80T 9.00 MO DPDT 807AL 807ALN N T.00 MO SPDT 808AL 808ALN N T 8.00 MO SPDT & AA SPDT 809AL 809ALN N T 8.00 AA SPDT 80AL 80ALN N T Timer & AA SPDT 8AL 8ALN N T.00 MO DPDT & AA DPDT 8AL 8ALN N T.00 MO DPDT $ AA DPDT 8AL 8ALN N T.00 AA DPDT SPECIFY FINISH U 0 Dull Stainless Steel (Standard For All Key Switches Except The 800AL) N/C V 8 Anodized Aluminum (Standard For The 800AL Key Switch Only) N/C C 0 Bright Brass 0.00 H Oil Rubbed Bronze 0.00 D 0 Dull Brass 0.00 P Bright Chrome T-SN-L F Bright Bronze 0.00 X Dark Bronze Anodized 0.00 G Dull Bronze 0.00 (Available For 800ALOnly) 0TD OPTIONS 0TD Mini timer, adj. -0 second 0.00 LT One tri color LED..00 /VDC, SPDT Red, green and amber CYL-KD /" Key cylinder with keys (keyed different).00 ATS Anti-tamper sensor, SPDT 0.00 L One LED. Specify red or green.00 RMB Buzzer, or VDC, 0mA.00 L Two LEDs. Red, and green.00 SN 8 db siren, V-VDC, ma

56 exit switches CK 00 series - / EXIT SWITCH OPTIONS - See Page 9 List 00 N N MN M NEW NEW 00N CSFM Listed A A NEW EEL Listed ¾ Button - Green Lens - Dull Stainless Steel Finish, Specify R for optional red lens Gang Narrow Contact Sign 0U 0NU AA (On/Off) SPDT none.00 0U 0NU Momentary SPDT EXIT.00 0U 0NU With Timer Module -0 sec. EXIT.00 /V AC/DC, A SPDT Contact 0U 0NU Momentary DPDT EXIT.00 0U 0NU AA (On/Off) DPDT none.00 0 SERIES - -/ x Exit Switch OPTIONS - See Page 9 List CK ¾ x Button - Green Illuminated Lens - Dull Stainless Steel Finish, Specify R for optional red lens Narrow Contact Sign NU Momentary SPDT PUSH TO EXIT.00 NU Integrated -0 sec Timer /VDC, A SPDT Contact PUSH TO EXIT.00 0 SERIES - Exit Switch OPTIONS - See Page 9 List CK Button, Green Illuminated Lens - Dull Stainless Steel Finish, Specify R for optional red lens Gang Contact Sign U Momentary SPDT PUSH TO EXIT.00 U Integrated -0 Sec Timer PUSH TO EXIT.00 /VDC, A SPDT Contact Button - Blue Iluminated lens only AU Momentary SPDT Symbol.00 AU Integrated -0 sec Timer /VDC, A SPDT Contact Symbol.00 code compliant manual release devices List CK Code Compliant Manual Releasing Devices and Sensors M and MN exit switches USED TOGETHER WITH the MDD PIR sensor comply with manual releasing device and sensor device requirements for Access-Controlled Egress Doors per: NFPA NFPA Uniform Fire Code -... BOCA National Building Code SBCCI Standard Building Code Code Compliant Manual Release Device Code Compliant Features: Fixed 0 second timer, re-triggerable; Failsafe - lock releases when power to switch is interrupted; Sign - PUSH TO EXIT; CSFM Listed; Enterprise Engineering Laboratory Listed: ¾ x Button, Green Illuminated Lens - Dull Stainless Steel Finish, Specify R for optional red lens Narrow Contact Sign MNU Integrated Fixed 0 sec. Timer /VDC, Amp SPDT Output Button, Green Illuminated Lens - Dull Stainless Steel Finish, Specify R for optional red lens Gang Contact Sign MU Integrated Fixed 0 sec. Timer /VDC, Amp SPDT Output Code Compliant Egress Sensor Code Compliant Features: PIR Egress Sensor with Failsafe Mode - lock releases when power to PIR sensor is interrupted. UL listed 9 Access Control System Units PUSH TO EXIT 0.00 PUSH TO EXIT 0.00 MDD-W MDD-B Model Color MDD-W White PIR Egress Sensor MDD-B Black PIR Egress Sensor Input: or ma max. Contact: SPDT Dry, 0VDC (8. H x 8.8 W x 8. D mm) Operating temp: -0 F to 0 F (-9 C to 9 C) Dimensions:. H x. W x. D 8

57 0 SERIES - -/ Mushroom Exit Switch List CK. Mushroom, Green Button Standard, Dull Stainless Steel Finish, Specify R For Optional Red Lens Gang Narrow Gang Contact Sign CU CNU AA (On/Off) NC SPST none OU ONU AA (On/Off) NO SPST none N - 0 N N NEW CU CNU Momentary NC SPST EXIT OU ONU Momentary NO SPST EXIT KU KNU Latching/ key reset DPST none U with Timer Module -0 sec. /V AC/DC SPDT A Contact EXIT 0.00 U NU Momentary DPST EXIT 0.00 U NU AA (On/Off) DPST none SERIES - -/8 Mushroom Exit & Panic Switches List CK -/8 Mushroom, Red Button Standard, Dull Stainless Steel Finish, Specify G For Optional Green Lens Gang Gang Contact Sign U AA (On/Off) DPST none 0.00 U Momentary DPST EXIT 0.00 U with Timer Module -0 sec. EXIT 0.00 /V AC/DC SPDT A Contact U Momentary -DPST EXIT 9.00 U Momentary DPST EXIT SERIES - Vandal Resistant Stainless Steel Exit Switch List CK Stainless Steel Button - / Thick Aluminum Plate - Security Screws - Plated Finish Not Available Gang Narrow Contact Sign V NV AA (On/Off) SPDT none 0.00 V NV Integrated Pneumatic Timer ADJ. -0 sec. SPDT contact none SERIES - Vandal Resistant Stainless Steel Exit Switch List CK Piezoelectric Stainless Steel Button - No moving parts - Integrated Time Delay - Red and Green Status Indicators /8 Stainless Steel - Security Screws - Plated Finish Not Available Gang Contact Sign 0U Integrated -0 Sec Timer /VDC, NO/NC A Contact PUSH TO EXIT OPTIONS AND FINISHES CK Options for 00, 0, 0, 0, 0 Series LG Green LED.00 LR Red LED.00 L Red And Green LED.00 L Tri-color LED - Red, Green, Amber.00 E Add Exit sign To AA Function Switch Only, 8.00 B No Exit sign (None) With Momentary Switch N/C Special Finish 0 / 0 Special finish is not available Designate special finish suffix from below in lieu of U (stainless steel) in part number. C 0 Bright Brass D 0 Dull Brass F Bright Bronze 0.00 G Dull Bronze H Oil Rubbed Bronze P Bright Chrome

58 TM SURE EXIT SENSE BAR DKK EXIT MECHANICAL SWITCH DK Listed J8 Access Control System Units Burglary Resistant Electronic Locking Mechanism CSFM 77-0:0 Listed J8 Access Control System Units Burglary Resistant Electronic Locking Mechanism CSFM 77-0:0 Standard Features Actuation: Pressure Sense Technology; Tri-Failsafe Voltage: /VDC Voltage Sense Input Current: 0 ma at Rest, ma Active Lock Output: SPDT, 0VDC Alarm Shunt/Status Output: SPDT, 0VDC Accessories Include: 0 Ft Cable and Connector; PT-U Armored Power Transfer Loop Standard for " Wide Door MODEL FINISH LIST PRICE PSB0V 8 Aluminum Anodized 0.00 PSB0X Dark Bronze Anodized 0.00 PSB0Y Black Anodized 0.00 PSB0C 0 Bright Brass.00 PSB0S 9 Bright Stainless Steel.00 PSB0U 0 Brushed Stainless Steel.00 ACCESSORIES PT PT OPTIONS MSB0 and PSB0 00-SK Standard Installation with standard mounting hardware ADD TO LIST 00GL-KIT Glass door mounting kit GL-MB Glass door mounting blocks () 0.00 Bars for wide doors Add "" or "8" for longer bar. May be field cut. Ex: PSB0V- Security Industry Finest ISC Expo N/C Shim kit used to raise bar from door. Recommended for wood or hollow metal doors with uneven mounting surface. Power Transfer: Specified with MSB0 only Standard Features Actuation: /8 total bar movement for mechanical switch actuation Contact: SPDT, 0VDC (nd switch optional) Standard for " Wide Door MODEL FINISH LIST PRICE MSB0V 8 Aluminum Anodized MSB0X Dark Bronze Anodized MSB0Y Black Anodized MSB0C 0 Bright Brass.00 MSB0S 9 Bright Stainless Steel.00 MSB0U 0 Brushed Stainless Steel.00 ACCESSORIES PT-U Stainless steel armored loop.00 PT-V Stainless steel armored loop with aluminum surface wire junction.00 00GL Kit Glass Mount Installation ADD TO LIST 00GL-KIT Glass door mounting kit GL-MB Glass door mounting blocks () 0.00 Bars for wide doors Add "" or "8" for longer bar. May be field cut. Ex: MSB0V- nd Mechanical Switch Add "" for nd mechanical switch for dual-failsafe redundant operation; alarm shunt; or monitoring output. Ex: MSB0-V N/C MSB0 or PSB 0. Assemble kit. Apply Adhesive. Mount 0

59 EXIT DEVICE SWITCH KITS & LATCH MONITORING STRIKES DK APPLICATION Activation of delayed egress locks Electromagnetic Lock Release Request-to-Exit Alarm Shunt or Alarm Activation MS- MS- MS- SWITCH KITS Switch Kits are field installed in the inactive hinge pad of an exit device to provide instantaneous release of EmLocks for egress. All kits include a SPDT Switch Assembly with wire leads. 0VDC. MODEL 0 VAC/DC MAKE & MODEL TO BE MODIFIED 0 Von Duprin,, 98, Von Duprin,, 98, 99 DPDT Von Duprin 7.00 Von Duprin Dor-O-Matic 990, 090, 990, Sargent 900, 9700, 9800, Adams Rite 800, 800, 8700, Precision Apex Series Jackson Jackson 09 DPDT Corbin Monarch 8 and Sargent Sargent 80 DPDT.00 8 Sargent 0/ Yale 7000 (Dogging mechanism required) 7.00 Kawneer Mid Panel Line Dor-O-Matic Arrow /00 series 7.00 NOTE: Consult factory for Exit Device Switch Kits not shown. Modification of any kind to a UL Listed device my void UL Listing. MONITOR STRIKES MS- Cylindrical latch monitor -/" SPDT MS-D Cylindrical latch monitor -/" DPDT 0.00 MS- Cylindrical latch monitor -7/8" SPDT MS-D Cylindrical latch monitor -7/8" DPDT 0.00 MS- Mortise lock latch monitor SPDT MS-D Mortise lock latch monitor DPDT 0.00 MS-8 Mortise lock deadbolt monitor SPDT MS-8D Mortise lock deadbolt monitor DPDT 0.00 MS-0* Mortise lock latch and deadbolt monitor SPDT 0.00 MS-0D* Mortise lock latch and deadbolt monitor DPDT 0.00 LIST LIST MS-8 MS-0 *MS-0 and MS-0D are handed but reversible

60 "BREAK GLASS" EMERGENCY DOOR RELEASE List V 9 Emergency door release DPDT switch with siren V-8VDC, 8 ma BB Surface box.00 9-GL Replacement glass, each EMERGENCY ACCESS PANEL List CK CB0-A CB0-A APB000A 00L- APB000A Emergency access panel for lobby door system. Mushroom button with key reset and siren WALL MOUNT ANNUNCIATOR List CK L Two LEDs. Specify lens color L Three LEDs. Specify lens color LT One tri-color LED. Red, Green and Amber LT Two tri-color LED. Red, Green and Amber SIRENS AND BUZZERS List CK 00-SN 00-RMB COMMUNICATING BATHROOM CONTROLS List CK CB0-B CB0-B 00-RMB Buzzer on gang plate. Specify VDC or VDC, 0mA max.00 00N-RMB Buzzer on narrow plate. Specify VDC or VDC, 0mA max SN Siren on gang plate, - 8VDC, 8mA max N-SN Siren on narrow plate, - 8VDC, 8mA max) 0.00 EmLock or Bolt Lock Application CB0-A Communicating bath switch, U 0 Stainless steel finish CB0-B Emergency access switch, Red. Required CB70 Emergency key switch 0.00 HiTower Application CB0-A Communicating bath switch, U 0 Stainless steel finish CB0-B Emergency access switch, Red. Required CB70 Emergency key switch 0.00 Reference page for system operation and component requirements DESK SWITCH IN COMPACT BOX List DK - - AA, SPDT push switch 0VAC/DC - MO, SPDT push switch 0 0VAC/DC - AA, SPDT toggle switch 0VAC/DC Add $.00 for each additional switch

61 TIME DELAY RELAY List CK Time Delay Relays 0TD Time delay relay module with adjustable -0 second relock delay. Input: /V AC/DC Output: SPDT, dry contact Voltage: 0 VDC (resistive) Size: -/"x -/" x /" 0.00 TIMERS List CK PASSIVE INFRARED EGRESS CONTROL List V PTH SERIES POWER TRANSFER HINGE List LSK PTH UL0B Listed for hr fire rated Doors See Details Page - 7 day programmable timer with memory battery back-up capability Output: SPDT, dry contact Voltage: 0 VAC/DC Specify V AC/DC or AC/DC MD-D-W Motion detector with time delay, white MD-D-B Motion detector with time delay, black PTH-Q PTH-Q-DPS PTH-0Q Four () Conductor Power Transfer Hinge 8 gauge - pair Amp, -pair 0 ma. x. standard weight, Dull Chrome Four () Conductor Power Transfer Hinge with Door Status Contact 8 gauge - -pair Amp, -pair 0 /V AC/DC Door Status Contact: 0 0VDC. x. standard weight, Dull Chrome Ten (0) Conductor Power Transfer Hinge 0 gauge - -pair Amp, -pair 0 ma. x. standard weight, Dull Chrome PTH-0Q-DPS Ten (0) Conductor Power Transfer Hinge with Door Status Contact 0 gauge - -pair Amp, -pair 0 ma Door Status Contact: 0 0VDC. x. standard weight, Dull Chrome POWER TRANSFER DEVICES List V PT PT-U Armored flex conduit, less wires, 8" long.00 PT-V Armored flex conduit, less wires, with wire junction box.00 PT- Concealed power transfer 0.00 PT- PT- DOOR POSITION SENSORS List V DPS- DPS-- MC- DPS- Adjustable ball type SPDT Amp 0.00 DPS-- Adjustable ball type SPDT Amp 0.00 MC- Recessed magnetic (/", SPDT, 0VDC, 0mA).00 MC-M Recessed magnetic mounted on -/" x -7/8" plate 0.00 MC-7 Biased high security recessed magnetic (", SPDT, 0VDC, 0mA) 0.00 MC-M

62 MINI CONSOLES List WK Mini Consoles provide control for one or two doors. Momentary or maintained push button switches with Tri-Color LED indicators. Dimensions: -/8" W x -/8" H x -/" L Color: Beige Contacts: 0VDC Power: 0.0 Amp required for each LED DTMO- One momentary switch and one LED.00 DTMO- Two momentary switches and two LED's DTMOMA- One momentary, one maintained switch and two LED's DTMA- Two maintained switches and two LED's DTMO- MODULAR CONTROL CONSOLES List WK TCC AL8 ALE DTMO- RCC AL8 AL8 ALE F EA TCC Slope front desk top console stations maximum when using control panels. Base unit, less panel. Color: black sides and beige top Dimensions: 0-/"W x -/"H x 9-/8"D RCC Rack mount console. stations maximum when using three control panels. (Maximum is 0 stations with "E" panel) Base unit, less panels. Color: Beige Dimensions: 9"W x -/"H x "D Chassis less switches and light panels. SPECIFY SWITCH AND INDICATOR PANELS Rocker Switch Rating: 0VDC Power Required per LED: 0.0 Amp AL Four momentary switches with LEDs BL Four maintained switches with LEDs CL Four momentary/off/maintained switches with LEDs DL Four momentary/off/momentary switches with LEDs AL8 Eight momentary switches with LEDs BL8 Eight maintained switches with LEDs CL8 Eight momentary/off/maintained switches with LEDs DL8 Eight momentary/off/momentary switches with LEDs ALE Four momentary switches with LEDs, alarm, reset push button and key lock 0.00 BLE Four maintained switches with LEDs, alarm reset push button and key lock 0.00 CLE Four momentary/off/maintained switches with LEDs, alarm, reset push button 0.00 and key lock DLE Four momentary/off/momentary switches with LEDs, alarm, reset push button and key lock 0.00 EA Panel with alarm, reset push button and key lock 0.00 F Blank panel 8.00 CABINETS CAB7 CAB Black cabinet for one RCC 7"H x 0-/"W x -/"D Black cabinet for two RCC -/"H x 0-/"W x -/"D ,000.00

63

64 Online System Design Wizard and Product Manager SDC has created the most advanced manufacturers website in the industry. SDC customers and industry professionals can not only specify products and create systems, but also have the ability to save, manage, modify, quote and share product and access control system information with other professionals System Design Wizard Product Manager Model Number Generator Automated Pricing Automated Document Retrieval Temporary Folder to Sort by Product Type or Door Opening Save Multiple Project Folders Online Organize Subfolders by Door Opening Generate and Send Quotes Generate and Send Request-For-Quote Share and Download Project Reports Share and Download Project Documents Share and Download Project Quotes MEMBER MEMBER MEMBER ISO 900 : 000 FM Willow Lane, Westlake Village, CA 9-9 P.O. Box 9, Westlake Village, CA Security Door Controls