JEEP WRANGLER JK (2 DOOR)

Transcription

1 WRANGLER JK ( DOOR) ARB DELUXE BULL BARS & WINCH BARS YEAR MODEL FEATURES WINCHES PART NO. 00- DELUXE WINCH BAR 00- STUBBY BAR CLEARANCED FOR LARGER TIRES, HI-LIFT JACK POINTS, AUX LIGHT MOUNTS 00- WINCH 00- WINCH WARN -900LBS, 9.TI, ZEON, S, 0, 0S, & MODELS FITS MOST LOW MOUNT MODELS, NOT POWERPLANT WARN -900LBS, 9.TI, ZEON, S, 0, 0S, & MODELS WARN -900LBS, 9.TI, ZEON, S, 0, 0S, & MODELS 00- ROCK BAR HI-LIFT JACK POINTS, AUX LIGHT MOUNTS WARN -900LBS, 9.TI, ZEON, S, 0, 0S, & MODELS 00,, , 900, 00, If not fitting factory fog lamps, order part # 000 (fog light insert cover) to complete installation If not fitting winch, order part # 00 (top pan cover) to complete installation Integrit Textured black powder coat finish Full width, no protection hoop on top of bumper, just bumper Narrower than full width ARB Deluxe Winch Bar, wider than ARB Stubby bar. IPF LIGHTING & ACCESSORIES YEAR RECOMMENDED LIGHTING 00- ARB INTENSITY LED, 00XSD, 90XSD, 900XSS, 900HIDD, 900HIDS, 90S/R, CS, 9CSG SAFARI SNORKEL YEAR RECOMMENDED SNORKEL PART NO. 00-.L V GAS ENGINE (LEFT HAND DRIVE) SS0HF 0-.L PENTASTAR V (LEFT HAND DRIVE) SS00HF ARB SIDE RAILS/ROCK SLIDERS/STEPS 00- ROCK SLIDERS - SATIN BLACK POWDER COAT FINISH ROCK SLIDERS - INTEGRIT TEXTURED BLACK POWDER COAT FINISH 00 ARB REAR PROTECTION S YEAR TYPE 00- REAR ASSEMBLY, RECOVERY POINTS, NO OPTIONAL SPARE TIRE CARRIER, BLACK 000,,, REAR ASSEMBLY, OPTIONAL TIRE CARRIER, RECOVERY POINTS, TEXTURED BLACK 00,, OPTIONAL SPARE TIRE CARRIER 00,,, OPTIONAL IPF REVERSE LIGHT Non Swing Out, Tire Mounts in Factory Position Accommodates Up to a " Tire Utilizes Factory Tow Package Optional spare tire carrier part no 00 will only work in combination with bumper part number 00 Will work with up to a tire. Modification to rd brake light may be required to fit spare tire. OUTBACK SOLUTIONS ROLLER DRAWER SYSTEM Integrit textured black powder coat finish Tire carrier not compatible with body lifts 00-0 ROLLER DRAWER KIT (X RD9 ROLLER DRAWERS, SIDE FLOOR KIT & INSTALL KIT) 000, 00-0 ROLLER DRAWER AND ROLLER DRAWER W/ROLLER FLOOR KIT (RD9, RDRF9, SIDE FLOOR AND INSTALLATION KIT) 000, 00-0 ROLLER DRAWER WITH ROLLER FLOOR KIT (X RDRF9, SIDE FLOOR KIT & INSTALLATION KIT) 000, Sub woofer relocation kit (JKBRKT) required when vehicles are equipped with factory sub woofers. Includes bracket only, harness extension may be required (not offerd by ARB). Roller drawer kit will not work on 00 models with factory installed sub woofers.

2 WRANGLER JK ( DOOR) ARB SKID PLATES 00- UNDER VEHICLE SKID PLATE SYSTEM -. LITER PETROL ONLY 000, 0- UNDER VEHICLE SKID PLATE SYSTEM -. LITER PETROL ONLY 00, Will not work with front Dana or Dana 0 housings without suspension modifications Will not work with stock height vehicles ARB AIR LOCKER TRACTION PACKS YEAR FRONT AXLE REAR AXLE DESCRIPTION PART NO. 00- DANA 0 DANA KIT CONTAINS RD00, RD, CKMA, 0, ARB0, 9, 00/KIT 00- DANA DANA KIT CONTAINS RD (X), CKMA, 0, ARB0, 9, /KIT 00- DANA DANA 0 KIT CONTAINS RD, RD, CKMA, 0, ARB0, 9, /KIT YEAR AXLE DESCRIPTION SHAFT SPLINE RATIO PART NO. 00- FRONT DANA 0 9. (."). & UP RD00. & DN RD0 DANA - RUBICON ONLY. (.0 ) ALL, RD,, 00- REAR DANA. (.") 0 ALL RD. (.0") ALL RD, DANA - RUBICON ONLY. (.0 ) ALL, RD,, Will Not Fit Rubicon Models Aftermarket Axle Shafts Required, Not supplied by ARB Will work with JK Rubicon Dana housing Will work with JK Rubicon Dana gears ONLY All Jeep JK Dana ring gears are thick and require a. & down carrier. The RD, RD & RD are all. & down carriers and are suitable for the JK Dana housing and ring & pinion gear sets. ARB AIR LOCKER DIFFERENTIAL COVERS DIFFERENTIAL DESCRIPTION PART NO. DANA 0 DANA 0 ARB DIFFERENTIAL COVER - RED 0000, DANA 0 DANA 0 ARB DIFFERENTIAL COVER - BLACK 0000B, DANA DANA ARB DIFFERENTIAL COVER - RED 0000, DANA DANA ARB DIFFERENTIAL COVER - BLACK 0000B, Internal diff cover modifications may be necessary with some R&P ratios if contact with cover occurs Steering linkage contact will occur with factory height suspension under full droop. + suspension lift required. 00- COMPLETE KITS GAS - LIGHT - HEAVY LOAD WITH BP- BYPASS SHOCKS AND CONTROL ARMS BP- INTERNAL BYPASS SHOCKS CONTROL ARMS KIT OMEJKBPP,,9, KIT OMEJKBP,,9, KIT OMEJKP,9, GAS - LIGHT LOAD/HEAVY LOAD KIT OMEJK,9, GAS - STOCK/LIGHT LOAD (0-90LBS) WITH OME BP- INTERNAL BYPASS SHOCKS GAS - HEAVY LOAD (90-0LBS) WITH OME BP- INTERNAL BYPASS SHOCKS KIT -. OMEJKDBPLK, KIT -. OMEJKDBPHK, GAS - STOCK/LIGHT LOAD (0-90LBS) KIT -. OMEJKDLKS, GAS - HEAVY LOAD (90-0LBS) KIT -. OMEJKDHKS, -OME SUSPENSION CONTINUED NEXT PAGE-

3 WRANGLER JK ( DOOR) 00- FRONT GAS - STOCK/LIGHT LOAD (0-90LBS) SPRING " NITROCHARGER SPORT SHOCK FRONT GAS - HEAVY LOAD (90-0LBS) SPRING " NITROCHARGER SPORT SHOCK REAR GAS - MEDIUM LOAD SPRING." NITROCHARGER SPORT SHOCK REAR GAS - HEAVY CONSTANT LOAD (00LBS) SPRING." NITROCHARGER SPORT SHOCK 00 OPTIONAL SHOCK ASBORBERS DESCRIPTION QUANITY PART NO. OME BP- INTERNAL BYPASS SHOCK FRONT - TO SUIT OMEJK KIT BP00, OME BP- INTERNAL BYPASS SHOCK FRONT - TO SUIT - LIFTS BP00 OME BP- INTERNAL BYPASS SHOCK REAR - TO SUIT - LIFTS BP000 OME BP- INTERNAL BYPASS SHOCK FRONT - TO SUIT LIFTS BP00 OME BP- INTERNAL BYPASS SHOCK REAR - TO SUITE LIFTS BP00 VEHICLE MOUNT KIT -FRONT- REQUIRED - BP- SHOCK FITMENT VM0000 VEHICLE MOUNT KIT -REAR- REQUIRED - BP- SHOCK FITMENT VM0000 VEHICLE MOUNT KIT - REAR - REQUIRED - BP- SHOCK FITMENT VM0000 NITROCHARGER SPORT FRONT EXTENDED LENGTH SHOCK 00L NITROCHARGER SPORT REAR EXTENDED LENGTH SHOCK 00L OPTIONAL COMPONENTS STEERING DAMPER OMESD FRONT LOWER CONTROL ARMS - PAIR LCAJKFR FRONT UPPER CONTROL ARMS - PAIR UCAJKFR REAR LOWER CONTROL ARMS - PAIR LCAJKRR REAR UPPER CONTROL ARMS - PAIR UCAJKRR STEERING DAMPER RELOCATION BRACKET FK0 PANHARD ROD EXTENSION BRACKET KIT LHD FK PANHARD ROD EXTENSION BRACKET KIT RHD FK9 FRONT TRIM SPACER 0MM OMEJKPF0 REAR TRIM SPACER 0MM OMEJKPR0 BUMP STOP EXTENSIONS FK0 REPLACEMENT FRT DRIVE SHAFT & T-CASE YOKE - MANUAL TRANS JK-FM 0, Do Not Fit More Than One Trim Spacer Per Coil Spring Fitment of Panhard rod extension bracket is not mandatory, but fitment will improve the ride Extended length shocks are for -" suspension lifts only and are not intended for uses with any Old Man Emu systems. Modified bump stops are required. Required if fitting " tires Kit contains Nitrocharger Sport Shocks Kit contains BP- Internal Bypass Shocks Fitment of OMESD steering damper requires relocation bracket part number FK0 Due to variations in vehicle weights (aftermarket accessories), trim packers are included to adjust the ride height. 9 When fitting larger tires, aftermarket wheels (rims) with greater offset (less backspacing) may be required to clear swaybar links and control arms. 0 Optional J.E. Reel Front replacement drive shaft & T-Case yoke. Rated for 0- of lift. Fits -Door and -Door models. Required for 0+ models when fitting OMEJK if not modifying exhaust. Optional when fitting OMEJK to 00- models Kit does not include optional OMESD steering damper or damper fit kit FK0 OME BP- shock part no. BP00 is specifically designed for the OMEJK Suspension System Vehicle mount part no. VM0000 required when fitting BP- BP00, BP00 and BP00 shocks. Vehicle mount part no. VM0000 required for fitment when fitting BP- BP000 shocks. Exhaust modifications or aftermarket front driveshaft required when fitting OMEJK to 0+ Jeep Wrangler JKs Vehicle mount part no. VM0000 required for fitment when fitting BP- BP00 shocks.

4 ARB DELUXE BULL BARS & WINCH BARS JEEP WRANGLER JK UNLIMITED ( DOOR) YEAR MODEL FEATURES WINCHES PART NO. 00- DELUXE WINCH BAR 00- STUBBY BAR CLEARANCED FOR LARGER TIRES, HI-LIFT JACK POINTS, AUX LIGHT MOUNTS 00- WINCH 00- WINCH WARN -900LBS, 9.TI, ZEON, S, 0, 0S, & MODELS FITS MOST LOW MOUNT MODELS, NOT POWERPLANT WARN -900LBS, 9.TI, ZEON, S, 0, 0S, & MODELS WARN -900LBS, 9.TI, ZEON, S, 0, 0S, & MODELS 00- ROCK BAR HI-LIFT JACK POINTS, AUX LIGHT MOUNTS WARN -900LBS, 9.TI, ZEON, S, 0, 0S, & MODELS 00,, , 900, 00, If not fitting factory fog lamps, order part # 000 (fog light insert cover) to complete installation If not fitting winch, order part # 00 (top pan cover) to complete installation Integrit Textured black powder coat finish Full width, no protection hoop on top of bumper, just bumper Narrower than full width ARB Deluxe Winch Bar, wider than ARB Stubby bar. ARB SIDE RAILS/ROCK SLIDERS/STEPS 00- ROCK SLIDERS - SATIN BLACK POWDER COAT FINISH ROCK SLIDERS - INTEGRIT TEXTURED BLACK POWDER COAT FINISH 00 ARB REAR PROTECTION S YEAR TYPE 00- REAR ASSEMBLY, RECOVERY POINTS, NO OPTIONAL SPARE TIRE CARRIER, BLACK 000,,, REAR ASSEMBLY, OPTIONAL TIRE CARRIER, RECOVERY POINTS, TEXTURED BLACK 00,, OPTIONAL SPARE TIRE CARRIER 00,,, OPTIONAL IPF REVERSE LIGHT Non Swing Out, Tire Mounts in Factory Position Accommodates Up to a " Tire Utilizes Factory Tow Package Optional spare tire carrier part no 00 will only work in combination with bumper part number 00 Will work with up to a tire. Modification to rd brake light may be required to fit spare tire. Integrit textured black powder coat finish Tire carrier not compatible with body lifts 00- COMPLETE KITS GAS - LIGHT - HEAVY LOAD WITH BP- BYPASS SHOCKS AND CONTROL ARMS BP- INTERNAL BYPASS SHOCKS CONTROL ARMS KIT OMEJKBPP,9,, KIT OMEJKBP,9,, KIT OMEJKP,,9, GAS - LIGHT LOAD/HEAVY LOAD KIT OMEJK,,9, GAS - STOCK/LIGHT LOAD (0-90LBS) WITH OME BP- INTERNAL BYPASS SHOCKS GAS - HEAVY LOAD (90-0LBS) WITH OME BP- INTERNAL BYPASS SHOCKS KIT -. OMEJKDBPLK, KIT -. OMEJKDBPHK, GAS - STOCK/LIGHT LOAD (0-90LBS) KIT -. OMEJKDLKS, GAS - HEAVY LOAD (90-0LBS) KIT -. OMEJKDHKS, -OME SUSPENSION CONTINUED NEXT PAGE-

5 WRANGLER JK UNLIMITED ( DOOR) 00- FRONT GAS - STOCK/LIGHT LOAD (0-90LBS) SPRING " NITROCHARGER SPORT SHOCK FRONT GAS - HEAVY LOAD (90-0LBS) SPRING " 9 NITROCHARGER SPORT SHOCK REAR GAS - NO LOAD SPRING." NITROCHARGER SPORT SHOCK REAR GAS - HEAVY CONSTANT LOAD (00LBS) SPRING." NITROCHARGER SPORT SHOCK REAR GAS - HEAVY CONSTANT LOAD (0LBS) SPRING." 0 NITROCHARGER SPORT SHOCK 00 OPTIONAL SHOCK ASBORBERS DESCRIPTION QUANITY PART NO. OME BP- INTERNAL BYPASS SHOCK FRONT - TO SUIT OMEJK KIT BP00, OME BP- INTERNAL BYPASS SHOCK FRONT - TO SUIT - LIFTS BP00 OME BP- INTERNAL BYPASS SHOCK REAR - TO SUIT - LIFTS BP000 OME BP- INTERNAL BYPASS SHOCK FRONT - TO SUITE LIFTS BP00 OME BP- INTERNAL BYPASS SHOCK REAR - TO SUITE LIFTS BP00 VEHICLE MOUNT KIT -FRONT- REQUIRED FOR BP- SHOCK FITMENT VM0000 VEHICLE MOUNT KIT -REAR- REQUIRED FOR BP- SHOCK FITMENT VM0000 VEHICLE MOUNT KIT -REAR- REQUIRED FOR BP- SHOCK FITMENT VM0000 NITROCHARGER SPORT FRONT EXTENDED LENGTH SHOCK 00L NITROCHARGER SPORT REAR EXTENDED LENGTH SHOCK 00L OPTIONAL COMPONENTS STEERING DAMPER OMESD FRONT LOWER CONTROL ARM - PAIR LCAJKFR FRONT UPPER CONTROL ARM - PAIR UCAJKFR REAR LOWER CONTROL ARM - PAIR LCAJKRR REAR UPPER CONTROL ARM - PAIR UCAJKRR STEERING DAMPER RELOCATION BRACKET FK0 PANHARD ROD EXTENSION BRACKET KIT LHD FK PANHARD ROD EXTENSION BRACKET KIT RHD FK9 FRONT TRIM SPACER 0MM OMEJKPF0 REAR TRIM SPACER 0MM OMEJKPR0 BUMP STOP EXTENSIONS FK0 REPLACEMENT FRT DRIVE SHAFT & T-CASE YOKE - MANUAL TRANS JK-FM 0, Do Not Fit More Than One Trim Spacer Per Coil Spring Fitment of Panhard rod extension bracket is not mandatory, but fitment will improve the ride Extended length shocks are for -" suspension lifts only and are not intended for use with any Old Man Emu systems. Extended bump stops are required. Required if fitting " tires Kit contains Old Man Emu Nitrocharger Sport Shocks Fitment of OMESD steering damper requires relocation bracket part number FK0 Due to variations in vehicle weights (aftermarket accessories), trim packers are included to adjust the ride height 9 When fitting larger tires, aftermarket wheels (rims) with greater offset (less backspacing) may be required to clear swaybar links and control arms. 0 Optional J.E. Reel Front replacement drive shaft & T-Case yoke. Rated for 0- of lift. Fits -Door and -Door models. Required for 0+ models when fitting OMEJK if not modifying exhaust. Optional when fitting OMEJK to 00- models Kit does not include optional OMESD steering damper or damper fit kit FK0 OME BP- shock part no. BP00 is specifically designed for the OMEJK Suspension System Vehicle mount part no. VM0000 required when fitting BP- BP00, BP00 and BP00 shocks Vehicle mount part no. VM0000 required when fitting BP- BP000 shocks Exhaust modifications or aftermarket front driveshaft required when fitting OMEJK to 0+ Jeep Wrangler JKs Kit contains OME BP- Internal Bypass Shocks Vehicle mount part no VM0000 required for fitment when fitting BP- BP00 shocks

6 WRANGLER JK UNLIMITED ( DOOR) ARB SKID PLATES 00- UNDER VEHICLE SKID PLATE SYSTEM -. LITER PETROL ONLY 000, 0- UNDER VEHICLE SKID PLATE SYSTEM -. LITER PETROL ONLY 00, Will not work with front Dana or Dana 0 housings without suspension modifications Will not work with stock height vehicles ARB AIR LOCKER TRACTION PACKS YEAR FRONT AXLE REAR AXLE DESCRIPTION PART NO. 00- DANA 0 DANA KIT CONTAINS RD00, RD, CKMA, 0, ARB0, 9, 00/KIT 00- DANA DANA KIT CONTAINS RD (X), CKMA, 0, ARB0, 9, /KIT 00- DANA DANA 0 KIT CONTAINS RD, RD, CKMA, 0, ARB0, 9, /KIT YEAR AXLE DESCRIPTION SHAFT SPLINE RATIO PART NO. 00- FRONT DANA 0 9. (."). & UP RD00. & DN RD0 DANA - RUBICON ONLY. (.0 ) ALL, RD,, 00- REAR DANA. (.") 0 ALL RD. (.0") ALL RD, DANA - RUBICON ONLY. (.0 ) ALL, RD,, Will Not Fit Rubicon Models Aftermarket Axle Shafts Required, Not supplied by ARB Will work with JK Rubicon Dana housing Will work with JK Rubicon Dana gears ONLY All Jeep JK Dana ring gears are thick and require a. & down carrier. The RD, RD & RD are all. & down carriers and are suitable for the JK Dana housing and ring & pinion gear sets. ARB AIR LOCKER DIFFERENTIAL COVERS DIFFERENTIAL DESCRIPTION PART NO. DANA 0 DANA 0 ARB DIFFERENTIAL COVER - RED 0000, DANA 0 DANA 0 ARB DIFFERENTIAL COVER - BLACK 0000B, DANA DANA ARB DIFFERENTIAL COVER - RED 0000, DANA DANA ARB DIFFERENTIAL COVER - BLACK 0000B, Internal diff cover modifications may be necessary with some R&P ratios if contact with cover occurs Steering linkage contact will occur with factory height suspension under full droop. + suspension lift required. OUTBACK SOLUTIONS ROLLER DRAWER SYSTEM 00-0 DOUBLE ROLLER DRAWER KIT (X RD ROLLER DRAWERS, SIDE FLOOR KIT & INSTALLATION KIT) 000, 00- SINGLE ROLLER DRAWER WITH ROLLER FLOOR (SLIDE OUT TOP) FOR VEHICLES EQUIPPED WITH PLASTIC TRIM AND INTEGRATED SUBWOOFER SINGLE ROLLER DRAWER WITH ROLLER FLOOR (SLIDE OUT TOP) FOR VEHICLES EQUIPPED WITH CARPET TRIM, NO INTEGRATED SUBWOOFER 000, 000 Sub woofer relocation kit (JKBRKT) required when vehicles are equipped with factory sub woofers. Includes bracket only, harness extension may be required (not offerd by ARB). Roller drawer kit will not work on 00 models with factory integrated sub woofers. Does not fit vehicles with carpet trim Does not fit vehilce with plastic trim and integrated subwoofer For more information on drawers systems SAFARI SNORKEL YEAR RECOMMENDED SNORKEL PART NO. 00-.L V GAS ENGINE (LEFT HAND DRIVE) SS0HF 0-.L PENTASTAR V (LEFT HAND DRIVE) SS00HF 9