bronco English user manual R82 A/S. All rights reserved. The R82 logo and the Bronco are registered trademarks of R82 A/S.

Size: px

Start display at page:

Ethan Hunter
5 years ago
Views:

1 bronco TM English user manual 2004 R82 /S. ll rights reserved. The R82 logo and the ronco are registered trademarks of R82 /S

2 Contents ronco... 3 Safety... 4 uarantee... 4 Tools... 4 Washing... 4 Maintenance... 4 Ready for use... 5 Height adjustment of seat and body support... 6 ngle adjustment of the body support... 6 rake... 7 Directional stabilizer... 7 bdominal pad... 8 Rear support... 8 Head support... 9 Handbrace rmrest Side supports Helper s handle Vertical hand grips, mounted at the ends Vertical hand grips, mounted in the middle Product identification Measurements Technical data Producer Distributor

3 Pat. pend. ronco Congratulations on choosing the ronco. We are convinced that it will fully live up to your expectations. The ronco is the outdoor walking aid from R82 for children from 1½ to 8 years of age. This manual describes and illustrates all functions, and will enable you to take maximum advantage of your ronco. 3

4 Safety The ronco has earned the CE-mark. This certify that it meets all relevant European safety requirements. The durability of this product is 7 years when it is used on a daily basis. Hereafter we recommend that the product should be renovated (by R82 personnel) to extend the lifetime. Remove the CE-mark, when re-building the product or when using other than original R82 spare parts and fittings. Never leave your child unattended in this product. Ensure permanent supervision by an adjult. Incorrect use of the ronco, may cause serious injury on the user. Take care that all the fixations and adjustments are placed and fitted correctly and check it on a regular basis. uarantee Notification of defects will be received at R82 /S within two years. The ronco is guaranteed for 12 months. The guarantee is only valid when using original R82 spare parts and fittings. ll special adjustments must be made by R82. R82 will not be held responsible for damage or injury caused by use of non-original parts or repairs made by a non-authorized R82 person. Tools ehind the rear support you will find a 6 mm llan key. This key is used to perform some of the adjustments described in this manual. Washing We recommend to clean the frame frequently. Maintenance - Clean the frame on a regular basis, especially when it has been in contact with rainwater / saline water. Do not use any cleaning materials containing chlorine or methylated spirit. djustments which are not described in this manual, must only be made by authorized R82 personnel. 4

5 Ready for use The ronco is delivered in parts to make it take up as little room as possible during transportation. To make your ronco ready for use, please follow the below description. 1) Dismount the fitting (). 2) Mount the seat () on the vertical bar on the frame and fasten with the enclosed llen key. Remount the fitting (). 3) Mount the rear support (C) beneath the sean and fasten using the handle (D). 4) Mount the handlebar (E) on the body support (F) and fasten with the enclosed llen key. 5) Mount the body support (F) in the vertical bar on the frame and fasten the fitting (). E F C Your ronco is now ready for use. D 5

6 Height adjustment of seat and body support Use the llen key as shown () to adjust the seat height. Fasten at the right position. djust the height or remove the body support by using the llen key. () ngle adjustment of the body support Pull the small handle forward as shown (C), to release the gasspring. Release the handle at the right angle. C 6

rake The ronce is equipped with brakes on all four wheels. The brakes can be activated when needed. 1) ctivate the brake () using a foot. 2) Deactivate the brake () using a foot.

7 rake The ronce is equipped with brakes on all four wheels. The brakes can be activated when needed. 1) ctivate the brake () using a foot. 2) Deactivate the brake () using a foot. Make sure that all four brakes are activated before placing the user into the ronco. Directional stabilizer The directional stabilizer prevents the wheels from turning. Directional stabilizers are mounted on all four wheels. Follow the below to activate the directional stabilizers: 1) Place the wheel in a forward pointing position (). 2) Turn the button () and the stabilizer activates. Lift and turn around the button () to deactivate the stabilizers. 7

8 bdominal pad Use the llen key to height adjust the abdominal pad (). Use the llen key to depth adjust the abdominal pad (). The abdominal pad is only to be used on size 1+2. D Rear support Remove or adjust the depth of the rear support by utilizing the handle behind the seat. (C) Use the llen key to adjust the height of the rear support. (D) C 8

9 Head support Follow the below to mount the head support correctly on the ronco: 1) Loosen the screw () to dismount the rear support and the side supports. 2) Mount the head support beneath the seat and fasten the screw (). 3) Loosen the handles (C), (D) and (E) to height, width and angle adjust the head support. When both head support and side supports are needed, the side supports have to be mounted on the body support bar. Please notice that ronco size 2 can not be equipped with both head support and side supports. E C D 9

10 Handbrace Use the enclosed 6 mm llen key () to height adjust the handbrace. Depth adjustment of the handbrace is done with the 6 mm llen key (). rmrest To adjust the angle, loosen the black lever (C) below the armrest. C 10

11 Side supports The side supports are individually adjustable in width as shown. () The side supports are mounted on the rear support bar. djust the height with the attached 6 mm llen key. () Helper s handle The helper s handle is mounted in the back of the ronco, as shown (C). Fasten with the black lever. Do not lift the ronco by using the helper s handle. C 11

12 Vertical hand grips, mounted at the ends Mount the vertical hand grips at the end of the hand brace in the following manner: C 1) Pop out the stopper () with a screwdriver. 2) Insert the grip and the supplied bushing () into the hand brace at the desired angle. 3) Tighten with the llen key (C). 12

13 Vertical hand grips, mounted in the middle 1. Cut the grip material () and remove it from the handbrace. Remove the stopper. 2. Determine placement of the hand grip () and take measurements to determine length of new grip material required for both sides of the hand grip. Cut grip material (C) to fit handle. 3. You can notch the grip material as shown (D) for complete coverage of the handle. 4. Mount the inside piece of the grip material. (Pouring some ethyl alcohol into the grip helps it slide onto the hand brace). Mount the hand grip (E) and tighten with the llen key. Mount the outer grip material and replace the stopper. C D E 13

14 Product identification ) Serial number The label is placed just next to the left rear wheel. ) Manufacturer The label is placed just next to the left rear wheel. Dato: elast: kg SN: Varenr: Parallelvej 3 DK-8751 edved 14

H SH L W Measurements Size 0 Size 1 Size 2 cm (inch) cm (inch) cm (inch) Length (L) 95 (37") 107 (41¾") 125 (28¾") Width (W) 59 (23") 66 (25¾") 73 (28½") Height (H) 54-66 (21-25¾") 58-81 (22½-31½")

15 H SH L W Measurements Size 0 Size 1 Size 2 cm (inch) cm (inch) cm (inch) Length (L) 95 (37") 107 (41¾") 125 (28¾") Width (W) 59 (23") 66 (25¾") 73 (28½") Height (H) (21-25¾") (22½-31½") (27¼-40¼") Seat height (SH) (10½-14½") (12¾-20") (16¾-23¾") ngle frequency () Weight 12,5 kg (27,5 lb) 13,5 kg (30 lb) 15,5 kg (34 lb) Max load 30 kg (66 lb) 40 kg (88 lb) 50 kg (110 lb) 15

16 Frame: Technical data Chrome or powder lacquered steel Upholstery: PUR (Polyurethane foam) Producer Distributor R82 /S Parallelvej edved Denmark Please find your distributor on 16

bronco English user manual Bronco.indd :21:18

bronco English user manual Bronco.indd :21:18 bronco TM English user manual 2010 R82 /S. ll rights reserved. The R82 logo and the ronco are registered trademarks of R82 /S. 05.2011 ronco.indd 1 19-05-2011 13:21:18 Contents ronco... 3 Safety... 4 Warranty...