Simba K102 production drill rig. Hydraulic production drill rig for long-hole mining

Size: px
Start display at page:

Download "Simba K102 production drill rig. Hydraulic production drill rig for long-hole mining"

Transcription

1 Simba K102 production drill rig Hydraulic production drill rig for long-hole mining 1

2 Get into your tunnel The simple and practical Simba k102 is a long-hole production drill rig for small to medium-drift mining, medium-to-large holes ranging from 64 to 89 mm in diameterit accomodates a range of drill bits and rock drills to adapt to your specific needs, and brings both ring drilling and parallel drilling pattern withi range of width 1.5 Meters. Mobile carrier with FOPS certified roof provides easier tramming and safer environment for operator. Varied and robust positioning mechanism brings flexible and stable feeder position, and accurate drilling straightness. Maintenance-friendly design makes the service work safe and easy. All service points are reachable from ground level. Main benefits FOPS certified roof for added safety Safety Mobile control panel keeps operators away from drilling center and provides clear visibility for drilling factors. FOPS certified roof protects operator during tramming. Uncompromising design and manufacture for all devices. The main electrical cabinet is located on a high point to be well protected from moist and water 360 rotary device Small profile Optimized size with up-and-down FOPS roof, adjustable positioning system and articulated carrier guarantees the operation in small tunnel and easier for navigation. Stability and reliability The Simba K102 is built on a sturdy carrier with proven design and components. The mobile control panel is connected to the machine via cable, and the system provides easy and reliable trouble shooting. Angle reading system for accurate control Extensible leg for added stability Mobile control panel gives flexible position for operator Swingable rear shaft for reduced waggle 2 3

3 Support for trouble free operation Epiroc is always committed to sustainable productivity. We value the research and development with the innovation and inspiration to realize customer's first choise. + COP1238 rock drill of durability and reliability A standard Simba K102 is equipped with a COP 1238K rock drill. It is developed to maximize impact power while optimizing durability. COP 1238K is designed for reliable and trouble-free operation. Its long and slender piston matched to the drill steel permits optimal impact power without damaging the drill steel. Built in damper contributes to improved drill steel economy and reduces wear on rock drill, feed and boom. It has separate lubrication of front-head and driver together with pressurized and lubricated mating surfaces and side-bolts for the best protection against wear and corrosion. + BMH 6000 series feed of ultimate reliability The BMH 6000 series feed is strong and rigid aluminum beam with extremely high resistance against bending and torsion stresses, which is able to reduce drill steel costs and ensures straighter holes. It is equipped with stainless steel bushing which protects the feed from wearing. The feed force can reach maximum 20 kn and make the machine drill faster. Wear pieces on all sliding surfaces protect major components and reduces maintenance costs. Accurate guidance of cradles ensures maximum service life for shank adapter and drill steel, and straighter holes. A comprehensive service offering Even the best equipment needs to be serviced regularly to make sure it sustains peak performance. An Epiroc service solution offers peace of mind, maximizing availability and performance throughout the lifetime of your equipment. We focus on safety, productivity and reliability. By combining genuine parts and an Epiroc service from our certified technicians, we safeguard your productivity wherever you are. COP 1238K COP Shank adapter T38 / T45 T38 / T45 Hole diameter mm mm Max. impact power 15 kw 18 kw Impact rate 50 Hz 60 Hz Hydraulic pressure 220 bar 230 bar Rotation motor 07/09 Separate rotation Rotation speed rpm / rpm rpm /0-215 rpm Rotation torque, max Nm / Nm 640 / Nm Lub. air consump. at 2 bar 6 l/s 5 l/s Weight 172 kg 170 kg Feed BMH 6000-series BMH 6X03R BMH 6X04R Total length mm mm Drill rod length 915 mm mm Positioning system Feed extension (with 915 mm and 1220 mm drill steel) mm Drill steel support... BSH45 Rotary Actuator BHR 30 for 360º ring drilling Pendulum arm, BHP 12 gives 1.5 m feed parallel positioning in the side walls Stinger backward on feed Stinger forward on feed Feed dump, drilling º forward and -80º backward Control system Electrical Direct System, EDS 12 Basic functions such as anti-jamming included Powerpack Hydraulic pump for percussion, positioning, feed Hydraulic pump for rotation Pumps unloaded at start System pressure, max bar Hydraulic oil tank, volume L Low oil level indicator and shut-down Oil temperature gauge on oil tank, electronically supervised Filtration, absolute μm Oil filter indicator Water cooled oil cooler in stainless steel Mineral hydraulic oil Electric system Total installed power / 65 kw Main motor / 55 kw Voltage / V Frequency Hz Starting method... star/delta (380V ) / direct (1 000 V) Thermal overload protection for electric motors Percussion hour meters on A-panel Digital volt/amperage meter in electric cabinet Phase sequence indicator Earth fault indicator Battery charger Transformer... 5 kva Working lights on tripods... 2x200 W, 24 V Cable reel, inner/outer diameter... ø 660/1095 mm Limit switch for cable reel Air system Compressor...Atlas Copco LE7 Capacity at 5400 rpm and 7 bar...12 L/s Air pressure gauge Water system Electric water booster pump Capacity at 10 bar boost... max 100 L/min Min water inlet pressure... 2 bar Water pressure gauge Carrier Engine... Deutz TCD3.6 L4, China Stage III Power rating at 2300 rpm kw Torque at 1300 rpm Nm Fixed seat for tramming, including safety belt Articulated steering... ±40 steering angle Four-wheel drift FOPS-approved protective roof Hydrostatic power steering system Front axle... DANA 112 Rear axle... DANA 112, ±10º oscillation Automatic differential lock on front axle, limited slip Tyres x15 Clearance outside axles... 15º Hydraulic jacks, front... 2 extendable Hydraulic jacks, rear... 2 Service brakes.2 separate circuits (hydraulically applied, fully enclosed wet disc brakes) Emergency and parking brakes... SAHR Fuel tank, volume L Electric system V Batteries... 2x70 Ah Tramming lights... 8xLED Brake lights Central lubrication system Catalyser Silencer exhaust system Fire extinguisher Spirit levels Gradeability at max load on drift wheels... 1:4 Tramming speed on flat ground... >10 km/h Tramming speed on incline 1:8... >4 km/h Horn, beacon and reverse alarm 4 5

4 Optional equipment Measurements Side view Drill steel Hole diameter, mm Drill rod Shank adapter Guide tube COP 1238K T38 Speedrod T38 56 / 64mm Dimension for a and b COP 1238K T45 Speedrod T45 64 / 76mm BMH 6803R BMH 6804R COP T38 Speedrod T38 56 / 64mm A COP T45 Speedrod T45 64 / 76mm B Protective roof COP with max. 18kW output power Working lights, HID 35W, 24V Double dampening system for optimized performance and drill Manual spotlight steel economy 35 R2 Carrier Electric system Voltage 1000V / 50 Hz Feed A lubrication surveillance system B Tramming lights, LED 40W, 24V Drill system Plug PC4 BMH 6X04R Socket PC4 Switch gear Control system Electric outlet, main supply voltage EDS18 Electrics according to local standards Tramming length, no Pirra Drilling platform Front view Turning radius mm Outer Inner Dimensions 750 mm (PH) Width Height tramming (A) 2 520/2 573 Height roof up Length Ground clearance 260 Total Weight 3000 Minimum drift height 1758 Max Rotation center to ground (PH) 6 Recommended cable size and length Rb(RD) 800 Voltage Type Dimension, mm2 Diameter,mm Length,m 380 V Buflex 3x70+3G V Buflex 3x35+3G Recommendations are given for surrounding temperature of 40 C. and up to a height of 2000m. Rc(PH) Feed BMH 6303 R BMH 6804 R Note: PH - Parallel Holes RD - Ring Drilling Unit: mm Kg Rotation center to ground gross weight 3000 Minimum drift width Rb Rc

5 Nanjing, China. Legal Notice Copyright 2018, Epiroc (Nanjing) Mining & Construction Equipment Ltd., Nanjing, China. All product names in this publication are trademarks of Epiroc. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Epiroc Customer Center for specific information. United in performance. Inspired by innovation. Performance unites us, innovation inspires us, and commitment drives us to keep moving forward. Count on Epiroc to deliver the solutions you need to succeed today and the technology to lead tomorrow. epiroc.com

Boomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2

Boomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2 Boomer 281 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous

More information

Boomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2

Boomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2 Boomer 281-15 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous

More information

Boomer XL3 D face drilling rig

Boomer XL3 D face drilling rig Boomer XL3 D face drilling rig Three-boom tunneling drill rig for large sized underground tunnels and cross sections, with maximum coverage area 178 m 2 1 A giant of high penetration Boomer XL3 D is a

More information

Boomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m²

Boomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m² Boomer L2 Hydraulically controlled face drilling rig with a coverage area up to 104 m² 1 Fast and efficient face drilling The Boomer L2 is a powerful hydraulically controlled face drilling rig for mining

More information

Boomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²

Boomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Boomer T1 Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Prime performance packed into a small, versatile unit The Boomer T1 is an ideal rig for narrow vein

More information

MAIN BENEFITS. Reverse camera to enhance good visibility for the operator when transporting the drill rig

MAIN BENEFITS. Reverse camera to enhance good visibility for the operator when transporting the drill rig SIMBA E6-W(WL) Hydraulic long hole production drill rigs for medium to large size mining, powerfull ITH- water hammer for long straight holes with high demand for hole quality. Hole range from 89 up to

More information

Boomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m²

Boomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m² Boomer E1/E2 series Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m² 1 For power and productivity The Boomer E1 and Boomer E2 rigs have extensive coverage

More information

Boomer S2. Robust face drilling rig with a coverage area up to 56 m 2

Boomer S2. Robust face drilling rig with a coverage area up to 56 m 2 Boomer S2 Robust face drilling rig with a coverage area up to 56 m 2 1 Robust performace in a small package The Boomer S2 is our smallest mining and tunneling rig with intelligent control, now tougher

More information

Boomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m²

Boomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² Boomer M-series Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² 1 Reloaded to meet your conditions The Boomer M-series face drilling rigs have become a key piece

More information

Boltec E. Fully mechanized rock bolting rig for bolt lengths from meters, effective in roof heights up to 13 meters

Boltec E. Fully mechanized rock bolting rig for bolt lengths from meters, effective in roof heights up to 13 meters Boltec E Fully mechanized rock bolting rig for bolt lengths from 2.4-6 meters, effective in roof heights up to 13 meters 1 Making mining safe Boltec E is a fully mechanized rock bolting rig suitable for

More information

Simba S7. Rugged rig with smart design and increased automation made for tight, tough conditions

Simba S7. Rugged rig with smart design and increased automation made for tight, tough conditions Simba S7 Rugged rig with smart design and increased automation made for tight, tough conditions 1 Flexibility, versatility and reliability Maximize productivity in small spaces with the Simba S7. This

More information

Boomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²

Boomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² Boomer E3/E4 series Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² 1 For power and productivity Face drill rigs in the Boomer E3 and E4 series have

More information

Boltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions

Boltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions Boltec S Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions 1 Making mining safe Boltec S is a fully mechanized rock bolting rig suitable

More information

Boomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2

Boomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs

More information

Boltec M. A fully mechanized rock bolting rig for bolt lengths from m and heights up to 9.5 meters

Boltec M. A fully mechanized rock bolting rig for bolt lengths from m and heights up to 9.5 meters Boltec M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m and heights up to 9.5 meters 1 Making mining safe A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 meters.

More information

Boomer E1-DH. Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2

Boomer E1-DH. Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2 Boomer E1-DH Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2 1 For power and productivity The Boomer E1-DH rig has extensive coverage areas of

More information

BOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2

BOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2 BOOMER S Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2 w GROUND-BREAKING PRODUCTIVE DRILLING THE BOOMER S1 IS A FACE DRILLING RIG FOR MINING AND TUNNELLING.

More information

Simba M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter

Simba M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter Simba M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 Compact and powerful long-hole drilling solution The sturdy Simba M4 is a

More information

High precision solution

High precision solution Simba M6 Hydraulic production drill rig with I-beam mounted drilling unit for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 High precision solution The sturdy Simba

More information

Precise and flexible production drilling

Precise and flexible production drilling Simba E7-series Hydraulic long-hole production drill rig for medium to large size drifts, with excellent coverage area and hole range from 51 to 178 mm 1 Precise and flexible production drilling The drill

More information

BOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2

BOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2 BOOMER T Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2 PRIME PERFORMANCE PACKED INTO A SMALL, VERSITILE UNIT THE BOOMER T1 D IS AN IDEAL RIG FOR NARROW VEIN

More information

Boomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2

Boomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Cutting costs and boosting productivity

More information

BOOMER M-SERIES. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2.

BOOMER M-SERIES. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2. BOOMER M-SERIES Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2. RELOADED TO MEET YOUR CONDITIONS THE BOOMER M-SERIES FACE DRILLING RIGS HAVE BECOME A KEY PIECE

More information

BOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m²

BOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m² BOOMER E1/E2 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m² FOR POWER AND PRODUCTIVITY THE BOOMER E1 AND BOOMER E2 RIGS HAVE EXTENSIVE COVERAGE

More information

PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction

PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction Hole diameter: 90 165 mm (39/₁₆" 6½") 1 Power up your performance The PowerROC D55 is designed according to our philosophy

More information

SIMBA MAIN BENEFITS. FOPS and ROPS approved cab for a safe and comfortable operator environment

SIMBA MAIN BENEFITS. FOPS and ROPS approved cab for a safe and comfortable operator environment SIMBA E7-SERIES Hydraulic long hole production drill rig for medium to large size drifts, with excellent cover area and flexibility. Hole range from 51 up to 127 mm. SIMBA PRODUCTION DRILLING IN MEDIUM

More information

BOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²

BOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE

More information

BOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²

BOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE

More information

Scooptram ST2D. Underground diesel loader with 3.6 tonne load capacity

Scooptram ST2D. Underground diesel loader with 3.6 tonne load capacity Scooptram ST2D Underground diesel loader with 3.6 tonne load capacity 1 Hardened loader For small and narrow vein mines A parallel boom design matched to an aggressive bucket configuration provides efficient

More information

FlexiROC T15 R Surface drill rig for quarrying and construction

FlexiROC T15 R Surface drill rig for quarrying and construction FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.

More information

PowerROC T35. Surface drill rig for construction and quarrying Hole diameter: mm (2½" 4½")

PowerROC T35. Surface drill rig for construction and quarrying Hole diameter: mm (2½ 4½) PowerROC T35 Surface drill rig for construction and quarrying Hole diameter: 64 115 mm (2½" 4½") 1 Power and performance Epiroc s PowerROC rigs truly live up to their names with enough muscles for tough

More information

BOLTEC M. A fully mechanized rock bolting rig for bolt lengths from m heights up to 9.5 meters

BOLTEC M. A fully mechanized rock bolting rig for bolt lengths from m heights up to 9.5 meters BOLTEC M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m heights up to 9.5 meters BOLTEC M MAKING MINING SAFE A FULLY MECHANIZED ROCK BOLTING RIG FOR BOLT LENGTHS FROM 1.5-3.5 METERS.

More information

FlexiROC T20 R A drill rig for surface- and underground construction

FlexiROC T20 R A drill rig for surface- and underground construction FlexiROC T20 R A drill rig for surface- and underground construction Hole diameter: 38 64 mm (1.5 2.5 ) Multi-purpose without compromise The FlexiROC T20 R (MK II) is the construction contractor s new

More information

FlexiROC T35 & T40 Surface drill rigs for quarrying and construction

FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 hole diameter: 64 115 mm (2.5 4.5 ) FlexiROC T40 hole diameter: 64 127 mm (2.5 5 ) Flexible rigs for all occasions For

More information

PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.

PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. Hole diameter: 51 89 mm( (2" 3½") 1 Powerful and effective If you re looking

More information

SmartROC D50 and D55 DTH surface drill rig for quarrying and mining

SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 hole diameter: 90 130 mm (3.5 5.1") SmartROC D55 hole diameter: 90 152 mm (3.5 6") Drill rigs with intelligence and power

More information

Scooptram ST2G. Underground diesel loader with 4 tonne load capacity

Scooptram ST2G. Underground diesel loader with 4 tonne load capacity Scooptram ST2G Underground diesel loader with 4 tonne load capacity 1 Popular underground loader The scooptram ST2G is a popular choice for applications varying from mine development, production in small

More information

SIMBA M6. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.

SIMBA M6. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA M6 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA HIGH PRECISION SOLUTION THE STURDY SIMBA M6 IS A LONG-HOLE PRODUCTION

More information

Robbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter

Robbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of

More information

SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry.

SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry. SpeedROC D30 Surface drill rig for marble, granite, and limestone in the dimension stone industry. Hole diameter: 70 105 mm (2.75" 4.25") Speed up your profits SpeedROC D30 is a versatile and flexible

More information

SIMBA M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.

SIMBA M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA THE STURDY SIMBA M4 IS A LONG-HOLE PRODUCTION DRILL RIG FOR MEDIUM TO

More information

FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction

FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction FlexiROC T30 R Quarry Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Pioneering productivity The FlexiROC T30 R quarry edition is a tophammer rig designed

More information

PowerROC T25 DC Surface drill rig for drill site construction civil engineering, small aggregate and limestone quarrying.

PowerROC T25 DC Surface drill rig for drill site construction civil engineering, small aggregate and limestone quarrying. PowerROC T25 DC Surface drill rig for drill site construction, civil engineering, small aggregate and limestone quarrying. Hole diameter: 51 89 mm (2" 3½") 1 Your way to success The PowerROC T25 DC uses

More information

Easer L. Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m

Easer L. Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m Easer L Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m Versatile Raiseboring rig Designed to drill opening holes in block cave, sub level caving and sub level stoping mines, this

More information

PowerROC T30 E Surface drill rig for quarrying and construction

PowerROC T30 E Surface drill rig for quarrying and construction PowerROC T30 E Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (3.5 5.5 ) Stronger than ever With a robust engine and a reach of 4.3 meters the PowerROC T30 E takes your performance

More information

FlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction

FlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction FlexiROC T30 R Construction Edition Surface drill rig for quarrying and construction Hole diameter: 45 89 mm (1.75 3.5 ) Extend your reach and versatility The FlexiROC T30 R Construction Edition is a tophammer

More information

FlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction

FlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction FlexiROC T25 R Constrution Edition Surface drill rig for quarrying and construction Folding boom hole diameter: 38 64 mm (1½ 2½ ) Improve your speed and accuracy The FlexiROC T25 R construction edition

More information

FlexiROC D60/D65 Surface drill rig for quarrying and construction

FlexiROC D60/D65 Surface drill rig for quarrying and construction FlexiROC D60/D65 Surface drill rig for quarrying and construction FlexiROC D60 hole diameter: 110 178 mm (4.3" 7") FlexiROC D65 hole diameter: 110 203 mm (4.3" 8") A rig you can rely on The FlexiROC D60

More information

SmartROC T45 Surface drill rig for quarrying and construction

SmartROC T45 Surface drill rig for quarrying and construction SmartROC T45 Surface drill rig for quarrying and construction Folding boom hole diameter: 89 127 mm (3,5" 5") Standard boom hole diameter: 89 140 mm (3,5" 5,5") Smart and precise efficiency With the SmartROC

More information

SmartROC CL Surface drill rig for open pit mining and selective mining

SmartROC CL Surface drill rig for open pit mining and selective mining SmartROC CL Surface drill rig for open pit mining and selective mining Hole diameter: 115 216 mm (4.5 8.5 ) The SmartROC CL is built to beat the rock The fuel-efficient SmartROC CL is one of the most powerful

More information

Robbins 91/123. Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter

Robbins 91/123. Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter Robbins 91/123 Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter 1 Compact and powerful The Robbins 91 and Robbins 123 rigs are powerful raise-boring rigs with

More information

Explorac 100 Reverse circulation drill rig for exploration drilling

Explorac 100 Reverse circulation drill rig for exploration drilling Explorac 100 Reverse circulation drill rig for exploration drilling Hole diameter: 127 165 mm (5" 6.5") Fast and accurate Reverse circulation (RC) drilling represents a fast and economical way to retrieve

More information

PowerROC T45. Surface drill rig for quarrying and construction Hole diameter: mm( (3" 5")

PowerROC T45. Surface drill rig for quarrying and construction Hole diameter: mm( (3 5) Surface drill rig for quarrying and construction Hole diameter: 76 127 ( (3" 5") 1 Power built in The gives you high reliability and power worthy its name. Thanks to its compact structure and high manoeuvrability,

More information

T50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6

T50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6 powerroc T50 Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: 102 152mm / 4 6 trustful performer with striking efficiency Everything about

More information

FLEXIROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½" 5")

FLEXIROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½ 5) FLEXIROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION FIELD

More information

Minetruck MT436LP. Underground truck with 32.6-tonne load capacity

Minetruck MT436LP. Underground truck with 32.6-tonne load capacity Minetruck MT436LP Underground truck with 32.6-tonne load capacity 1 Reliable underground haulage for low seam operations Minetruck MT436LP is an underground truck with a 32.6-metric tonne load capacity.

More information

PowerROC D55. Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 )

PowerROC D55. Surface drill rig for mining, aggregate quarries, and construction. Hole range: mm ( 3 9/16 6 1/2 ) PowerROC D55 Surface drill rig for mining, aggregate quarries, and construction. Hole range: 90 165mm ( 3 9/16 6 1/2 ) Power up your performance The PowerROC D55 is designed according to our philosophy

More information

Scooptram ST7 Battery. Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader

Scooptram ST7 Battery. Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader Scooptram ST7 Battery Power Unleashed the new Scooptram ST7 Battery is a fully electric powered and automation ready underground loader 1 Cutting costs and boosting productivity with smart solutions The

More information

SmartROC C50 Surface drill rig for quarrying, mining and construction

SmartROC C50 Surface drill rig for quarrying, mining and construction SmartROC C50 Surface drill rig for quarrying, mining and construction Hole diameter: 90 140 mm (3.5 5.5") 1 Speed, power and precision The SmartROC C50 from Epiroc gives you the best of both worlds. The

More information

Minetruck MT431B. Underground articulated truck with 28.1-metric tonne load capacity

Minetruck MT431B. Underground articulated truck with 28.1-metric tonne load capacity Minetruck MT431B Underground articulated truck with 28.1-metric tonne load capacity 1 Reliable underground haulage Minetruck MT431B is a high speed, articulated underground truck, featuring state-of-the-art

More information

SmartROC T35 & T40 Surface drill rigs for quarrying and construction

SmartROC T35 & T40 Surface drill rigs for quarrying and construction SmartROC T35 & T40 Surface drill rigs for quarrying and construction SmartROC T35 hole diameter: 64 115 mm (2.5" 4.5") SmartROC T40 hole diameter: 76 127 mm (3" 5") World champion of fuel efficiency SmartROC

More information

FLEXIROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½" 5")

FLEXIROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½ 5) FLEXIROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½" 5") Fixed boom Hole diameter: 89 140 mm 3 ½" 5 ½" PRECISE POWER HALF THE FUEL CONSUMPTION YEARS OF

More information

SpeedCut Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension stone industry.

SpeedCut Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension stone industry. SpeedCut Diamond wire cutting machine for marble, granite, sandstone and limestone in the dimension stone industry. Wire speed: 0 45 m/s (0 148 ft/s) The fastest cutting machine SpeedCut, the fastest diamond

More information

Scooptram EST1030. Electric underground loader with 10-tonne capacity

Scooptram EST1030. Electric underground loader with 10-tonne capacity Scooptram EST1030 Electric underground loader with 10-tonne capacity 1 Electrically powered to save energy, time and money The Scooptram EST1030 is a fast, electrically powered loader with a 10 tonne capacity

More information

MEYCO ME5. Mobile concrete spraying for large sized tunnels

MEYCO ME5. Mobile concrete spraying for large sized tunnels MEYCO ME5 Mobile concrete spraying for large sized tunnels DEPENDABLE CONCRETE SPRAYING ACCURATE ECONOMICAL CONCRETE SPRAYER. BETTER THAN EVER Productivity heightened with improved pumping efficiency Accuracy

More information

SMARTROC D60. Surface drill rig for aggregate and limestone quarries, surface mining and construction. Hole diameter mm (4 5/16 7 )

SMARTROC D60. Surface drill rig for aggregate and limestone quarries, surface mining and construction. Hole diameter mm (4 5/16 7 ) SMARTROC D60 Surface drill rig for aggregate and limestone quarries, surface mining and construction Hole diameter 110 178 mm (4 5/16 7 ) SMART IS THE NEW ROBUST A SMART DRILLING SOLUTION, BUILT ON A ROBUST

More information

powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying.

powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying. powerroc T30 & T35 Surface drill rig for construction operations, aggregate and limestone quarrying. Hole diameter : 64 89mm (2 1/2 3 1/2 ) : 64 115mm (2 1/2 4 1/2 ) Power and performance Atlas Copco s

More information

MEYCO ME3. Concrete Spraying Mobile for medium sized tunnels

MEYCO ME3. Concrete Spraying Mobile for medium sized tunnels MEYCO ME3 Concrete Spraying Mobile for medium sized tunnels VERSATILE CONCRETE SPRAYING APPLICATION EXPERTISE UNIFIED FOR HIGH QUALITY, ECONOMICAL AND SAFE APPLICATION OF SPRAYED CONCRETE. MAIN BENEFITS

More information

Unigrout Flex S and Flex M. The flexible grouting system to reinforce both underground and on surface construction

Unigrout Flex S and Flex M. The flexible grouting system to reinforce both underground and on surface construction Unigrout and The flexible grouting system to reinforce both underground and on surface construction 1 A flexible grouting system Quick and easy to move, the complete Unigrout and system consists of a manually

More information

ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder.

ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder. FACE MASTER Page 1 of 2.0 6 Twin boom drill rig ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder. MAIN COMPONENTS Rockdrill Montabert HC 109 Boom B 40

More information

FlexiROC T35 & T40. Surface drill rigs for quarrying and construction. FlexiROC T35 Hole diameter: mm (2 1/2 4 1/2 )

FlexiROC T35 & T40. Surface drill rigs for quarrying and construction. FlexiROC T35 Hole diameter: mm (2 1/2 4 1/2 ) FlexiROC T35 & T40 Surface drill rigs for quarrying and construction FlexiROC T35 Hole diameter: 64 115 mm (2 1/2 4 1/2 ) FlexiROC T40 Hole diameter: 64 127 mm (2 ½ 5 ) Flexible rigs for all occasions

More information

Häggloader. A unique continuous loading system

Häggloader. A unique continuous loading system Häggloader A unique continuous loading system 1 The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.

More information

Minetruck MT42. Underground truck with 42-tonne load capacity

Minetruck MT42. Underground truck with 42-tonne load capacity Minetruck MT42 Underground truck with 42-tonne load capacity 1 Superior underground haulage Minetruck MT42 is a high speed, 42-metric tonne articulated underground truck, featuring state-of-the-art levels

More information

Minetruck MT2200. Articulated underground truck with 22-tonne load capacity

Minetruck MT2200. Articulated underground truck with 22-tonne load capacity Minetruck MT2200 Articulated underground truck with 22-tonne load capacity 1 Productive and reliable operations Minetruck MT2200 is a high-capacity truck built for fast, efficient underground haulage.

More information

Scooptram ST14. Underground loader with 14-tonne capacity

Scooptram ST14. Underground loader with 14-tonne capacity Scooptram ST14 Underground loader with 14-tonne capacity 1 Superior underground mucking The Scooptram ST14 is full with features that makes it powerful and yet fuel efficient and the thorough improvements

More information

MINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity

MINETRUCK MT431B. Underground articulated truck with 28.1-metric tonne load capacity MINETRUCK MT431B Underground articulated truck with 28.1-metric tonne load capacity MINETRUCK MT431B RELIABLE UNDERGROUND HAULAGE THE MINETRUCK MT431B IS AN ARTICULATED UNDERGROUND TRUCK WITH A 28.1-METRIC

More information

Diamec Smart 6 Core drilling rig

Diamec Smart 6 Core drilling rig Diamec Smart 6 Core drilling rig Hole diameter: A, B, N and H Designed to perform Epiroc's advanced Rig Control System means the Diamec Smart 6 operates automatically. Drilling functions are easily performed

More information

FLEXIROC T35,T40 SPEEDROC D30. Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2

FLEXIROC T35,T40 SPEEDROC D30. Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2 FLEXIROC T35,T40 Surface Drill Rig for medium sized drifts and tunnels with a coverage area up to XXX m2 SPEEDROC D30 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone

More information

SMARTROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½ 5 )

SMARTROC T45. Surface drill rig for quarrying and construction. Folding boom Hole diameter: mm (3½ 5 ) SMARTROC T45 Surface drill rig for quarrying and construction. Folding boom Hole diameter: 89 127 mm (3½ 5 ) Fixed boom Hole diameter: 89 140 mm (3½ 5½ ) SMART AND PRECISE EFFICIENCY With the SmartROC

More information

SCOOPTRAM ST7 BATTERY

SCOOPTRAM ST7 BATTERY SCOOPTRAM ST7 BATTERY Power Unleashed Delivering unparalleled productivity, Scooptram is the most reliable underground loader on the market. The New Scooptram ST7 is fully battery powered and fully automation

More information

SMARTROC D65. Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining.

SMARTROC D65. Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining. SMARTROC D65 Surface down-the-hole drill rig for limestone and aggregate quarries, selective mining, construction and open pit mining. Hole diameter 110 203 mm (4 5/16 8") THE MINING MASTERMIND THE SMARTROC

More information

Scooptram ST7LP. Low-profile underground loader with 6.8-tonne capacity

Scooptram ST7LP. Low-profile underground loader with 6.8-tonne capacity Scooptram ST7LP Low-profile underground loader with 6.8-tonne capacity 1 Superior productivity in low seam applications The low-profile Scooptram ST7LP with a back height of only 1.6 M is a robust underground

More information

Scooptram ST7. Underground small size loader with 6.8-tonne capacity

Scooptram ST7. Underground small size loader with 6.8-tonne capacity Scooptram ST7 Underground small size loader with 6.8-tonne capacity 1 The latest technology in narrow vein mining The Scooptram ST7 is a robust loader which is built for demanding underground applications

More information

SMARTROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½ 5 )

SMARTROC T45. Surface drill rig for quarry and construction. Folding boom Hole diameter: mm (3½ 5 ) SMARTROC T45 Surface drill rig for quarry and construction. Folding boom Hole diameter: 89 127 mm (3½ 5 ) Fixed boom Hole diameter: 89 140 mm (3½ 5½ ) SMART AND PRECISE EFFICIENCY WITH THE SMARTROC T45

More information

ROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.

ROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG

More information

SCOOPTRAM EST1030. Electric underground loader with 10-tonne capacity

SCOOPTRAM EST1030. Electric underground loader with 10-tonne capacity SCOOPTRAM EST1030 Electric underground loader with 10-tonne capacity ELECTRICALLY POWERED TO SAVE ENERGY, TIME AND MONEY THE SCOOPTRAM EST1030 IS A FAST, ELECTRICALLY POWERED LOADER WITH A 10 -TONNE CAPACITY

More information

MINETRUCK MT42. Underground truck with 42-tonne load capacity

MINETRUCK MT42. Underground truck with 42-tonne load capacity MINETRUCK MT42 Underground truck with 42-tonne load capacity MINETRUCK MT42 SUPERIOR UNDERGROUND HAULAGE THE MINETRUCK MT42 IS A HIGH SPEED, 42-TONNE ARTICULATED UNDERGROUND TRUCK, FEATURING STATE-OF-THE-ART

More information

Charmec LC 605 D(V) Features. Technical data sheet

Charmec LC 605 D(V) Features. Technical data sheet Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross

More information

5200 ITH Specifications and Features

5200 ITH Specifications and Features 2003 Specifications and Features 5200 ITH The 5200 is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure. This drill is unitized with an on board reciprocating

More information

MINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity

MINETRUCK MT5020. Underground articulated truck with 50 -tonne load capacity MINETRUCK MT5020 Underground articulated truck with 50 -tonne load capacity MINETRUCK MT5020 FAST, EFFICIENT UNDERGROUND HAULAGE MT5020 IS AN ARTICULATED UNDERGROUND TRUCK WITH 50 METRIC TONNES LOAD CAPACITY.

More information

ROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter

ROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter ROBBINS 53RH C Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter SMART IN THE UPS AND DOWNS OF DRILLING THE ROBBINS 53RH C IS A UNIQUE MULTIPURPOSE RAISE DRILL, ABLE TO

More information

MINETRUCK MT2010. Underground articulated truck with 20-tonne load capacity

MINETRUCK MT2010. Underground articulated truck with 20-tonne load capacity MINETRUCK MT2010 Underground articulated truck with 20-tonne load capacity MINETRUCK MT 2010 COMPACT AND QUICK FOR EFFICIENT HAULAGE MT2010 IS AND ARTICULATED UNDERGROUND TRUCK WITH A LOAD CAPACITY OF

More information

Charmec LC 605 D(V) Features. Technical data sheet AUSTRALIA

Charmec LC 605 D(V) Features. Technical data sheet AUSTRALIA Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross

More information

Scooptram ST14. Underground loader with 14-tonne capacity

Scooptram ST14. Underground loader with 14-tonne capacity Scooptram ST14 Underground loader with 14-tonne capacity Scooptram ST14 Superior underground mucking The new Scooptram ST14 is full with new features that makes it more powerful and yet more fuel efficient.

More information

Charmec MC 605 D(V) Features. Technical data sheet AUSTRALIA

Charmec MC 605 D(V) Features. Technical data sheet AUSTRALIA Pictured machine may include options and additional equipment. Features Charmec MF 605 D charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels

More information

FLEXIROC T30 R. Construction Edition. Hole diameter: mm (1 3/4 3 1/2 )

FLEXIROC T30 R. Construction Edition. Hole diameter: mm (1 3/4 3 1/2 ) FLEXIROC T30 R Construction Edition Hole diameter: 45 89 mm (1 3/4 3 1/2 ) EXTEND YOUR RECH ND VERSTILITY THE FLEXIROC T30 R CONSTRUCTION EDITION IS TOPHMMER RIG DESIGNED FOR WIDE RNGE OF DRILLING PPLICTIONS.

More information

Spraymec 8100 VC. Features. Technical data sheet AUSTRALIA

Spraymec 8100 VC. Features. Technical data sheet AUSTRALIA Equipment includes options and extra equipment. Features is an electro-hydraulic self-propelled mobile concrete sprayer which optimizes concrete spraying in tunnel projects with variable tunnel cross-sections.

More information

SCOOPTRAM ST7. Underground, small size loader with 6.8-tonne capacity

SCOOPTRAM ST7. Underground, small size loader with 6.8-tonne capacity SCOOPTRAM ST7 Underground, small size loader with 6.8-tonne capacity SCOOPTRAM ST7 THE LATEST TECHNOLOGY IN NARROW VEIN MINING THE SCOOPTRAM ST7 IS A ROBUST LOADER THAT IS BUILT FOR DEMANDING UNDERGROUND

More information

Häggloader. A unique continuous loading system

Häggloader. A unique continuous loading system Häggloader A unique continuous loading system The Häggloader concept To drive long tunnels cost-effectively, you need high capacity equipment designed to operate efficiently in narrow or confined spaces.

More information

Utimec LF 600 Agitator

Utimec LF 600 Agitator Pictured machine may include options and additional equipment. Features Utimec LF 600 Agitator with practical concrete transport capacity of 6 m 3 is designed for concrete transportation in underground

More information