IRIS & SHELL 3443 & 3444

Transcription

1 IRIS & SHELL 3443 & 3444

2 IRIS 3443

3 SHELL 3444

4 The Iris is a softly curved and crisp shape which belies its thick underside. The minimal form provides accent illumination which applies for any indoor or outdoor environment.

5

6

7 The form of the Shell was conceived with curved lines so as to optimally blend within a luminaire pattern or surrounding elements of space.

8 RADIATING rays soft GLOW

9 Anatomy ANATOMY ANATOMY IRIS WEATHERPROOF CONSTRUCTION 3 self-adhesive silicone sponge gaskets. Mechanically compressed sealing. Exterior grade powder coat paint. Stainless steel hardware. Certified: c-csa-us Wet Location to UL standards. Designed for IP64, suitable for interior and exterior projects. ROBUST DIFFUSER Made of thick walled pressed glass. Sealed against water, dirt & insects. 2 optical choices: uniformly diffuse or sun ray effect. Ø 4.81 Ø 122mm DRIVER Located in electrical box 3409 TUMBLER A TOUGH DECORATIVE FRONT A slightly curved die-cast aluminum decorative shade. ADA compliant. Very durable and resistant to temperature changes. Impact / vandal / weather resistant. Contributes to LED cooling. ELECTRICAL BOX The Iris is designed for conventional octagonal connection boxes (not supplied). BRIGHT & COOL 4 high power leds mounted on a white aluminum reflective board for high efficiency, heat dissipation and durability. 4.75" 120mm PRECIOUS JEWEL Its crisp, minimal form provides seamless accent illumination for any indoor or outdoor environment FAST & EASY INSTALLATION BEAUTIFUL AND DURABLE Aluminum molded mounting plate. The Tumbler Discrete is composed mounting of hardware a in stainless steel. machined heavy glass with an inside frosted surface for better diffusion OVERSIZED RADIATOR A large die-cast aluminum mass for an overachieving cooling effect. Radial finned design to draw heat to outside air. 3.00" 77mm Ø12.00" Ø300mm INTERNAL OPTICAL DIFFUSER High quality polycarbonate diffuser IP 65 UL WET SPECIFICATIONS 4W DEL 8W DEL LIGHT SOURCE 4 x high powered Nichia LEDs on MCPCB - total ±4 w 4 x high powered Nichia LEDs on MCPCB - total ±8 w MODULE UL recognized - made in USA DELIVERED LUMENS (ESTIMATION) 231 lm (3000K) / 242 lm (4000K) 364 lm (3000K) / 375 lm (4000K) CHARACTERISTICS 3409 CRI 80 (3000K & 4000K) ROHS Compliant LIGHT SOURCE 4 x 1W HIGH POWER LED on MCPCB 4 x 2W HIGH P STRUCTURE Die-cast Aluminum MODULE UL Recognized HEAT MANAGEMENT Die-cast Aluminium, integrated with the light module DELIVERED LUMENS 242lm (3000K) - 264lm (4000K) 355lm (3000K DIFFUSER Pressed glass offered in 2 options: Uniformly diffuse or Sun ray effect GASKETS Die-cut self-adhesive CRI silicone gaskets (minimum 80 CRI 3,2mm (3000K) thickness) - 80 CRI (4000K) LIGHT DISTRIBUTION Indirect BACKPLATE Die cast aluminum backplate with anthracite fine texture poweder coating VOLTAGE V LIGHT DISTRIBUTION Diffused 120V DRIVER Constant Current OPTICS driver 350mA, UL Recognized Clear machined Constant glass with Current inside driver frosted, 700mA, Polycarbonate UL Recognizedoptical diffuser DIMMING N / A GASKETS Die-cut self-adhesive N / A silicone gasket LM-79 In process VOLTAGE 120V WARRANTY 5 years DRIVER Constant current 350mA, UL recognized Constant curr LM-79 In process In process WARRANTY 5 years 3443 Eureka Lighting V1.0v Eureka Lighting

10 Anatomy ANATOMY ANATOMY SHELL WEATHERPROOF CONSTRUCTION 3 self-adhesive silicone sponge gaskets. Mechanically compressed sealing. Exterior grade powder coat paint. Stainless steel hardware. Certified: c-csa-us Wet Location to UL standards. Designed for IP64, suitable for interior and exterior projects. ROBUST DIFFUSER Made of thick walled pressed glass. Sealed against water, dirt & insects. 2 optical choices: uniformly diffuse or sun ray effect. Ø 4.81 Ø 122mm ELECTRICAL BOX This fixture is designed for conventional octagonal connection boxes (not supplied). DRIVER Located in electrical box 3409 TUMBLER A TOUGH DECORATIVE FRONT A slightly curved thick aluminum decorative shade. ADA compliant. Very durable and resistant to temperature changes. Impact / vandal / weather resistant. Contributes to LED cooling. BRIGHT & COOL 4 high power leds mounted on a white aluminum reflective board for high efficiency, heat dissipation and durability. 9.00" 230mm 4.75" 120mm PRECIOUS JEWEL Its crisp, minimal form provides seamless accent illumination for any indoor or outdoor environment BEAUTIFUL AND DURABLE FAST & EASY INSTALLATION The Tumbler is composed of a Aluminum molded mounting plate. machined Discrete heavy glass mounting with hardware an inside in stainless steel. frosted surface Simple for 360 better angle diffusion adjustment of front plate. OVERSIZED RADIATOR A large die-cast aluminum mass for an overachieving cooling effect. Radial finned design to draw heat to outside air. In full contact with the front plate for additional heat dissapation. 3.00" 77mm Ø13.50" Ø343mm INTERNAL OPTICAL DIFFUSER High quality polycarbonate diffuser IP 65 UL WET SPECIFICATIONS 4W DEL 8W DEL LIGHT SOURCE 4 x high powered Nichia LEDs on MCPCB - total ±4 w 4 x high powered Nichia LEDs on MCPCB - total ±8 w MODULE UL recognized - made in USA DELIVERED LUMENS (ESTIMATION) 211 lm (3000K) / 222 lm (4000K) 338 lm (3000K) / 350 lm (4000K) CHARACTERISTICS 3409 CRI I80 (3000K & 4000K) ROHS Compliant LIGHT SOURCE 4 x 1W HIGH POWER LED on MCPCB 4 x 2W HIGH P STRUCTURE Die-cast Aluminum MODULE UL Recognized HEAT MANAGEMENT Die-cast Aluminium, integrated with the light module DIFFUSER Pressed glass DELIVERED offered in 2 LUMENS options: Uniformly 242lm diffuse (3000K) or Sun ray - 264lm effect (4000K) 355lm (3000K) GASKETS Die-cut self-adhesive CRI silicone gasket (minimum 803,2mm CRI (3000K) thickness) - 80 CRI (4000K) LIGHT DISTRIBUTION Indirect BACKPLATE Die cast aluminum backplate with anthracite fine texture poweder coating VOLTAGE V LIGHT DISTRIBUTION Diffused 120V DRIVER Constant Current OPTICS driver 350mA, UL Recognized Clear machined Constant glass with Current inside driver frosted, 700mA, Polycarbonate UL Recognizedoptical diffuser DIMMING N / A GASKETS Die-cut self-adhesive N / A silicone gasket LM-79 In process VOLTAGE 120V WARRANTY 5 years DRIVER Constant current 350mA, UL recognized Constant curre LM-79 In process In process WARRANTY 5 years 3444 Eureka Lighting V1.0v Eureka Lighting

11 Photometric report CCT (K): Initial lumens (lm): Delivered lumens (lm): Input watts (W): Number of LED s: Lumens per LED: Distribution: Efficiency (%): Efficacy (lm/w): Photometric type Luminous dimensions Luminous shape: Units: Axis: Axis: Height: Iris 3443-LED308-ANTE-CLR 8w LED Clear diffuser Luminaire spacing criteria 2 luminaires, plane 0: 2 luminaires, plane 90: 4 luminaires: Direct-Indirect 46.3% 31.9 C Rectangle in (mm) 12 (343) 12 (220) 2.6 (65) Shell 3444-LED304-ANTE-FRO 4w LED Frosted diffuser CCT (K): Initial lumens (lm): Delivered lumens (lm): Input watts (W): Number of LED s: Lumens per LED: Distribution: Efficiency (%): Efficacy (lm/w): Photometric type Luminous dimensions Luminous shape: Units: Axis: Axis: Height: Luminaire spacing criteria 2 luminaires, plane 0: 2 luminaires, plane 90: 4 luminaires: Direct-Indirect 40.2% C Rectangle in (mm) 13.5 (343) 8.66 (220) 2.8 (71) cd angles cd angles

12 Installation Instructions 2 LUMINAIRE SHAPES / 2 FORMES DE LUMINAIRES 3444 SHELL BLACK / NOIR 3443 IRIS 2 WHITE / BLANC BLACK / NOIR A 1 B RED / ROUGE TO FIXTURE / VERS LUMINAIRE DRIVER FORMAT MAY VARY / LE FORMAT DU PILOTE PEUT VARIER C D 3 5 E F H G 6 4 2X BLACK / NOIR 2X RED / ROUGE PRESS & HOLD / POUSSER & TENIR ADJUST LEVEL / AJUSTER NIVEAU IP 65 UL WET INSTALLATION 1 - REMOVE BACKPLATE [A] 2 - CONNECT WIRES AND INSERT DRIVER [B] IN JUNCTION BOX (not supplied). 3 - INSTALL THE BACKPLATE [A] TO JUNCTION BOX USING 2 SCREWS [D] (ALIGN SET SCREW VERTICALLY IF POSSIBLE). 4 - FILL ANY GAPS BETWEEN WALL AND BACKPLATE [A] WITH SILICONE CAULKING (not supplied). 5 - CONNECT FIXTURE [F] WIRES TO QUICK CONNECTS [E] WITH MATCHING COLOR. 6 - PLACE WIRES INTO FIXTURE [F] & PUSH FIXTURE IN BACKPLATE, ADJUST LEVELLING, PUSH FIXTURE TO COMPRESS GASKET & TIGHTEN 2 SET SCREWS [G] WITH 2MM (9/64 ) HEX TOOL [H]. MAINTENANCE FOR INFORMATION ABOUT LED OR DRIVER REPLACEMENT: PLEASE CONTACT YOUR EUREKA AGENT INSTALLATION G 1 - ENLEVER LA PLAQUE RONDE [A]. 2 - CONNECTER LES FILS DU PILOTE [B] ET L INSÉRER DANS LA BOÎTE DE CONNEXION (non fournie). 3 - FIXER LA PLAQUE RONDE [A] À LA BOÎTE DE CONNEXION À L AIDE DE DEUX VIS [D] (SI POSSIBLE ALIGNER VERTICALEMENT LES VISSES DE PRESSION). 4 - REMPLIR DE SILICONE (non fournie) TOUTE OUVERTURE ENTRE LE MUR ET LA PLAQUE RONDE [A]. 5 - CONNECTER LES FILS DU LUMINAIRE [F] AU RACCORD RAPIDES [E] AVEC FIL DE COULEUR CORRESPONDANTE. 6 - POUSSER LES FILS DANS LE LUMINAIRE & INSÉRER DANS LA PLAQUE RONDE, AJUSTER LE NIVEAU SI BESOIN, PRESSER LE LUMINAIRE & SERRER LES VISSES DE PRESSION [G] AVEC LA CLÉ HEXAGONALE 2MM (9/64 ) [H]. MAINTENANCE POUR LES INFORMATIONS RELIÉES AU REMPLACEMENT DES DEL OU DES PILOTES: VEUILLEZ CONTACTER VOTRE AGENT EUREKA

13