WELCOME TO MAGNATROL

Transcription

1 Catalog 6

2 BULLETIN 6-INDEX WELCOME TO MGNTROL Process Control Solenoid Valves For Water Oil ir Gas Steam Cryogenics Vacuum Solvents Brine Oxygen Corrosive Fluids Magnatrol Valve Corp. Established 1936 Experienced Dedicated Sales Staff pplication / Engineering ssistance Excellent Product Support Quick Delivery Our continued success has come from manufacturing a top quality product, product support, commitment to service and on-time delivery assuring complete customer satisfaction. Our Products Every valve is manufactured and tested in-house following Quality ssurance Standards where production operations are under the control of our dedicated, experienced staff and workforce. High Quality Bronze and Stainless Steel Solenoid Valves* Pressures up to 0 * Temperatures up to 400 F * Cryogenic and Oxygen Service pplications Normally Closed (Energize to Open) Normally Open (Energize to Close) Continuous Duty Coils for all C & Voltages NO Differential Pressure Required to Open Full Port-Internal Pilot Operated or Direct cting -Way Straight Thru Design Packless Construction * Custom Engineered Valves, Special lloys, Temperatures, Pressures and pplications as well as Modifications to Standard Magnatrol Valves are available through Magnatrol s Clark-Cooper Division. (See bottom of page 3) TBLE OF CONTENTS Category Pages(s) Coils Construction Features Bronze Valves N & NR & 7 & R & 9 M & MR & 11 S & SR & 13 L & LR & 15 G & GR & 17 D Strainers Stainless Steel Valves K & KR & 1 W & WR & 3 Optional Features & Ordering Information & 7 Terms & Conditions/Contact Info DDITIONL CTLOGS Technical/Engineering Catalog.. 6-ENG Technical & Engineering Data including: Sandy Well Water Valves Gritty Coolant Valves Universal Mount Catalog UM Valves can be mounted in any position Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

3 BULLETIN 6-VLVE SELECTION CHRT VLVE SELECTION CHRT Ordering Information - See Pages 6 & 7 For Optional Features - See Pages 4 & VLVE SELECTION CHRT (For Fluids/Gases Not Listed nd For Special pplications, Consult Factory) Max. Temperature Up To 1 F Up To 400 F Construction Bronze Stainless Steel Valve Type D G/GR N/NR /R M/MR S/SR L/LR K/KR W/WR Page & 17 6 & 7 8 & 9 10 & 11 1 & & 15 0 & 1 & 3 Pressure / / Internal Port Full Full Reduced Full Reduced Full Full Full Full ir t t t t t t t Brine t t t t t Gas t t t t t t Oil t t t t t t Solvents t t t t t t t Water t t t t t t t Vacuum t t t t Steam t t t Cryogenic t t t Oxygen, Liquid t t t Oxygen, Gaseous t t t t t Corrosive t Use the chart above to determine suitable types of Magnatrol valves for a given application. Example: normally closed valve for use on 100 psi steam, there are three types suitable and the final selection can only be made after referring to Bulletins 6-M, 6-S and 6-W on pages 10, 1 and respectively. Maximum Differential Pressure: When specifying a valve, the Maximum Differential Pressure must be equal to or greater than the application. Care should be taken not to over specify the valve by choosing a valve with a Maximum Differential Pressure that is excessively beyond the application. If you are unsure please consult the factory. -Way and 3-Way 1/4 Thru 6 Pressures to 10,000 Temperatures up to 5 F Dirty / Viscous & Corrosive Fluids Bronze, 316SS, Monel, lloy 0 & Hastelloy 3-Valve Manifold for CNG Refueling End connections: NPT, Flange, Union, Socket Weld, Butt Weld, Nipples etc. Options: Remote Trip with Manual or utomatic Reset and many others Designs for Navy and Marine Service High Pressure Cartridge Valve 10,000 3-Way Trip Valve with Position Indicating Switches and Manual Reset Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077 3

4 BULLETIN 6-COIL SOLENOID COILS CONTINUOUS DUTY COILS ELECTRICL CHRCTERISTICS Coils are stocked for the following voltages: Voltage * *, 60 Hertz C 75V for locomotive applications * Furnished with surge protecting capacitor Reference should be made to the Bulletins to determine the availability of a required valve for a specific power supply. Consult the factory for information regarding voltage and frequencies not listed. ENCPSULTED COIL Valves for.c. service can be converted for use on other.c. voltages simply by changing the coil. Similarly D.C. valves can be converted for other D.C. voltages. Consult factory regarding conversion from.c. to D.C. or D.C. to.c. CURRENT CONSUMPTION: Current values shown in the bulletins are for 10 volts, 60 hertz. For other voltages the current is inversely proportional: For instance, if a given valve draws 0.5 amperes on 10 volts it would draw 0. amperes on 40 volts, or 0.1 amperes on 480 volts. Where power consumption is shown in D.C. watts, the values given should be divided by line voltage to obtain the current in amperes. Power consumption for all valves is shown in the individual bulletins. CONSTRUCTION: Continuous Duty Construction: Coils can be energized continuously without overheating or failure. Wire Leads: 18 long 18 gauge wire standard (longer continuous leads available) Encapsulated: Coils are encapsulated for temperature of intended service, providing excellent resistance to shock, moisture, oil and chemicals COIL CLSS: GENERL SERVICE - CLSS B INSTLLTION: The coil is a two wire device which may be controlled by either a single or double pole switch. The switch should always be installed in the hot leg of 10 volt circuits. Where both legs are hot, such as 40 or 480 volt circuits, a double pole switch is preferable, however, if a single pole switch is used, then the wiring should have top quality insulation since even minute leakage currents may give rise to sticking problems. On motor hookup with step control starter, full voltage should be supplied to coil immediately. Note: Coil can be readily changed while valve is still under pressure. HIGH TEMPERTURE - CLSS H Maximum Fluid Maximum mbient Maximum Fluid Maximum mbient Temperature Temperature Temperature Temperature 1 F (413 C) 104 F (40 C) 400 F (06 C) 1 F (100 C) 4 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

5 BULLETIN 6-CONSTRUCTION VLVE CONSTRUCTION FETURES Valve Construction Features: -way straight thru globe design Bronze or Stainless Steel body w/ female NPT threads standard Stainless Steel available with 1# and # flanged ends Full port-internal pilot operated or direct acting Packless construction Continous duty coils for all voltages No differential pressure required to open Easy In-Line Service Inspect, clean or service all internal parts of full port-internal pilot operated or direct acting while the valve body remains in the pipeline shortening costly down time and increasing productivity. HOUSING Construction: Malleable or Cast Iron Designed for rugged industrial use Self contained terminal box with NPS conduit connection COIL vailable Class B or H insulation Designed for continuous duty service vailable in most C or voltages Coil Enclosure vailable: NEM 1, 4, 4X and Explosion Proof Conduit Boss Coil BONNET PISTON SSEMBLY sturdily constucted stem assembly consisting of a plunger and stainless steel pilot flexibly connected to the piston Discs are available in various materials dictated by operating conditions flanged metallic tube encloses the plunger and hermetically seals the top of the valve VLVE BODY Constructed of high pressure cast bronze or stainless steel in a globe pattern with screwed ends* Bonnet Piston Valve Disc Disc Nut Bonnet Ring Plunger Valve Spring Pilot Valve Valve Body Normally Closed Valve shown is typical of Type, thru 1-1/4 vailable in a full range of sizes * Stainless Steel valves available with flanged ends. Flanged Bronze valves available through Magnatrol s Clark- Cooper Division (See bottom of page 3). MGNTROL SOLENOID OPERTED VLVES are used to control the flow of liquids or gases, generally in conjunction with automatic control apparatus such as thermostat, float switch, time switch, or flow meter. Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077 5

6 BULLETIN 6-N BRONZE SOLENOID VLVES MX. FLUID TEMP. 1 F MX. STTIC PRESSURE FOR OPTIONS & CCESSORIES SEE PGES 4 & TYPE N - NORMLLY CLOSED TO PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN DIRECT CTING - ORIFICE SIZES 3/3 TO Valve opens when energized and closes when de-energized. In this direct acting valve, when the coil is energized, the stem is lifted from its conical seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPS conduit conn. *Valve Stem Stainless Steel *Spring - 30 Stainless Steel *Body Seal - Buna N *Orifice Seal - Metal to Metal *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, 18 leads - (Class H available) To control the flow of Water, Oil, ir, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. 3/8 Valve Port C DISCONTINUED -- USE VLVE WITH BUSHING Dimensions In 3/8 18N 1/4 18N4 75 3/16 18N /4 5-3/ /3 18N8 1 1/8 18N6 3/3 18N7 3/8 33N 75 5/16 33N /4 33N /8 6-3/ /16 33N5 1/8 33N N /16 18N /8 - -7/ N / /8 75 5/16 33N33 Voltage (C or ) Temperature (See pages 4 & ) 6 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

7 BULLETIN 6-NR BRONZE SOLENOID VLVES TYPE NR - NORMLLY OPEN TO PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN DIRECT CTING - ORIFICE SIZES 3/3 TO Valve closes when energized and opens when de-energized. In this direct acting valve, when the coil is energized, the stem is pressed into its conical seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPS conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Buna N *Orifice Seal - Metal to Metal *C Shading Coil - Copper *Stem Pin Stainless Steel Coil - Encapsulated Class B, 18 leads - (Class H available) To control the flow of Water, Oil, ir, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. MX. FLUID TEMP. 1 F MX. STTIC PRESSURE FOR OPTIONS & CCESSORIES SEE PGES 4 & 3/8 Valve Port C DISCONTINUED -- USE VLVE WITH BUSHING Dimensions In Voltage (C or ) Temperature (See pages 4 & ) 3 3/8 18NR 45 1/4 18NR4 70 3/16 18NR5 90 5/3 18NR / /8 18NR6 3/3 18NR7 45 3/8 33NR 70 5/16 33NR3 90 1/4 33NR /8 7-1/ /16 33NR5 70 1/8 33NR NR13 3 5/16 18NR /4 6-3/8 - -7/8 7 33NR /16 33NR /8 7-1/ /8 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077 7

8 BULLETIN 6- BRONZE SOLENOID VLVES MX. FLUID TEMP. 1 F MX. STTIC PRESSURE Except valves listed for 0 TYPE FULL PORT - NORMLLY CLOSED TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring - 30 Stainless Steel *Body Seal - Buna N or Non sbestos Gasket *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, 18 leads - (Class H available) To control the flow of Water, Oil, ir, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top / C /8-3-1/ E /8 4-1/8 3-1/ / / E / / /8 6-5/8-4-1/ / /8 0 E / /8 4-1/ / / N/ / / / / / / / /8 10-1/8 5-7/8 7-1/ /8 8-3/ Dimensions In FOR OPTIONS & CCESSORIES SEE PGES 4 & Voltage (C or ) Temperature (See pages 4 & ) Not available for operation 8 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

9 BULLETIN 6-R BRONZE SOLENOID VLVES TYPE R FULL PORT - NORMLLY OPEN TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring - 30 Stainless Steel *Body Seal - Buna N or Non sbestos Gasket *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, 18 leads - (Class H available) To control the flow of Water, Oil, ir, Gas, Solvents, Brine, Vacuum and any other fluids not reactive with construction materials and free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. MX. FLUID TEMP. 1 F MX. STTIC PRESSURE Except valves listed for 0 FOR OPTIONS & CCESSORIES SEE PGES 4 & Voltage (C or ) Temperature (See pages 4 & ) Not available for operation 1 1-1/ C R4 18R / /4 18R5 0 E33R /8 8-1/4 4-1/8 3-1/ R3 18R /4 7-1/ R33 33R /4 8-1/ E133R /8 4-1/ R4 18R /8 33R34 33R / /8 0 E133R /4 8-7/8 4-1/8 4-1/ R 18R / R35 33R / R N/ / R6 35R / /8 41R36 41R / / R R7 36R /8 10-1/8 5-3/8 6 4R37 4R /8 10-3/8 5-3/ R R8 1 43R48 43R /8 7-1/4 143R R R49 44R /8 11-1/8 6-5/8 8-3/8 144R Dimensions In Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077 9

10 BULLETIN 6-M BRONZE SOLENOID VLVES MX. FLUID TEMP. 400 F MX. STTIC PRESSURE 1 FOR OPTIONS & CCESSORIES SEE PGES 4 & TYPE M - NORMLLY CLOSED 3/8 TO PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN DIRECT CTING - ORIFICE SIZES 1/8 TO Valve opens when energized and closes when de-energized. In this direct acting valve, when the coil is energized, the stem is lifted from its conical seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPS conduit conn. *Valve Stem Stainless Steel *Spring - Inconel *Body Seal - Non sbestos Gasket *Orifice Seal - Metal to Metal *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class H, 18 leads To control the flow of Steam, Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-97 F), Liquid rgon (-303 F) and Liquid Nitrogen (-30 F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. INLET 3/8 10 Valve Port C **Cleaning: Cryogenic valves are degreased and cleaned to keep them free of moisture. Oxygen valves are also black light tested. 3/8 10M1 1/4 10M /16 10M / /8-5/ /3 10M81 1 1/8 10M61 3/8 M /16 1/4 M31 M /8 6-3/ /8 1 3/16 M51 3/8 10M 1/4 10M4 75 3/16 10M / / /3 10M8 1 1/8 10M6 3/8 M 75 5/16 M /4 M /8 6-3/ /16 M /16 10M33 10M /8-7/8-7/ /16 M13 M / /8 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077 Dimensions In Voltage (C or ) Temperature (See pages 4 & )

11 BULLETIN 6-MR BRONZE SOLENOID VLVES TYPE MR - NORMLLY OPEN 3/8 TO PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN DIRECT CTING - ORIFICE SIZES 1/8 TO Valve closes when energized and opens when de-energized. In this direct acting valve, when the coil is energized, the stem is pressed into its conical seat by the plunger. INLET Voltage (C or ) Temperature (See pages 4 & ) 3/8 CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends Coil Enclosure - Malleable Iron, NPS conduit conn. * Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Non sbestos Gasket *Orifice Seal - Metal to Metal *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class H, 18 leads To control the flow of Steam, Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-97 F), Liquid rgon (-303 F) and Liquid Nitrogen (-30 F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. MX. FLUID TEMP. 400 F MX. STTIC PRESSURE 1 FOR OPTIONS & CCESSORIES SEE PGES 4 & **Cleaning: Cryogenic valves are degreased and cleaned to keep them free of moisture. Oxygen valves are also black light tested. Valve Port 3 3/8 10MR1 45 1/4 10MR /16 10MR /4-7/8-5/8 90 5/3 10MR /8 10MR /8 MR /16 1/4 MR31 MR /8 7-1/ / /16 MR51 3 3/8 10MR 45 1/4 10MR4 70 3/16 10MR /4-7/8-90 5/3 10MR /8 10MR6 45 3/8 MR 70 5/16 MR3 90 1/4 MR /8 7-1/ /16 MR /16 10MR33 10MR /4 6-3/8-7/8-7/ /16 MR13 MR /8 7-1/ /8 UL Listed Valves - Consult Factory C Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey Dimensions In

12 BULLETIN 6-S BRONZE SOLENOID VLVES MX. FLUID TEMP. 400 F MX. STTIC PRESSURE TYPE S FULL PORT - NORMLLY CLOSED TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring - Inconel *Body Seal - Non sbestos Gasket *Orifice Seal - Glass Filled Teflon *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class H, 18 leads FOR OPTIONS & CCESSORIES SEE PGES 4 & TO CONTROL THE FLOW OF STEM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top / C S 114S /8-7/8 3-1/ S / / S3 114S /8 6-7/ S / S S4 116S /8 3-1/4 4-1/ S / /8 17S15 117S / S / / S N/ / S16 35S / / S S / /8 36S17 36S / S47 14S /8 6 43S18 43S S /8 10-1/8 5-7/8 7-1/ S S S9 44S /8 8-3/ S UL Listed Valves - Consult Factory Not available for operation Dimensions In Voltage (C or ) Temperature (See pages 4 & ) 1 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

13 BULLETIN 6-SR BRONZE SOLENOID VLVES TYPE SR FULL PORT - NORMLLY OPEN TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. MX. FLUID TEMP. 400 F MX. STTIC PRESSURE CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Springs - Inconel and 30 Stainless Steel *Body Seal - Non sbestos Gasket *Orifice Seal - Glass Filled Teflon *C Shading Coil - Copper *Stem Pin Stainless Steel Coil - Encapsulated Class H, 18 leads TO CONTROL THE FLOW OF STEM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. FOR OPTIONS & CCESSORIES SEE PGES 4 & Voltage (C or ) Temperature (See pages 4 & ) 1 1-1/ C SR 114SR /8 7-7/8 3-1/ SR / / SR3 114SR /4 7-1/8-7/ SR /4 8-1/ SR SR4 116SR / /4 4-1/ SR / /8 17SR15 117SR / SR /8 3-5/ SR N/ / SR16 35SR / / SR SR / /8 36SR17 36SR /8 10-1/8 5-3/ SR47 14SR /8 10-3/8 5-3/8 6 43SR18 43SR SR /8 7-1/ SR SR SR9 44SR /8 11-1/8 6-5/8 8-3/ SR UL Listed Valves - Consult Factory Not available for operation Dimensions In Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey

14 BULLETIN 6-L BRONZE SOLENOID VLVES MX. FLUID TEMP. 400 F MX. STTIC PRESSURE Except valves listed for 0 TYPE L FULL PORT - NORMLLY CLOSED TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPT conduit conn. *Pilot Valve Stainless Steel *Spring - Inconel *Body Seal - Non sbestos Gasket *Orifice Seal - Glass Filled Teflon *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class H, 18 leads FOR OPTIONS & CCESSORIES SEE PGES 4 & FOR STEM PPLICTIONS SEE BULLETIN 6-S Page 1 To control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-97 F), Liquid rgon (-303 F) and Liquid Nitrogen (-30 F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top / C L4 14L /8-7/8 3-1/4 9L / /4 0 E9L / / L3 14L /8 6-7/8 3-9L33 19L / E19L / L4 16L /8 3-1/4 4-1/8 31L34 131L / /8 0 E131L / / L 17L / L35 13L / / L N/ / L6 35L / /8 41L L56 141L / / L7 36L /8 6 4L37 4L / L L8 1 43L48 43L /8 10-1/8 5-7/8 7-1/4 143L L L49 44L /8 8-3/8 144L Not available for operation Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077 Dimensions In ** CLENING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested. Voltage (C or ) Temperature (See pages 4 & )

15 BULLETIN 6-LR BRONZE SOLENOID VLVES TYPE LR FULL PORT - NORMLLY OPEN TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seal it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. MX. FLUID TEMP. 400 F MX. STTIC PRESSURE Except valves listed for 0 ** CLENING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested. Voltage (C or ) Temperature (See pages 4 & ) CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPT conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Springs - Inconel and 30 Stainless Steel *Body Seal - Non sbestos Gasket *Orifice Seal - Glass Filled Teflon *C Shading Coil - Copper *Stem Pin Stainless Steel Coil - Encapsulated Class H, 18 leads To control the flow of Hot Liquids, Hot Gases, Cryogenics** and any other fluids not reactive with construction materials and free of sediment. Cryogenic fluids include Liquid Oxygen (-97 F), Liquid rgon (-303 F) and Liquid Nitrogen (-30 F). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top / C LR4 14LR /8 7-7/8 3-1/4 9LR / /4 0 E9LR / / LR3 14LR /4 7-1/8-7/8 3-9LR33 19LR /4 8-1/ E19LR /4 8-1/ LR4 16LR / /4 4-1/8 31LR34 131LR / /8 0 E131LR / / LR 17LR / LR35 13LR /8 3-5/ LR N/ / LR6 35LR /8 9-3/ /8 41LR LR56 141LR / / LR7 36LR /8 10-1/8 5-3/8 6 4LR37 4LR /8 10-3/8 5-3/ LR LR8 1 43LR48 43LR /8 7-1/4 143LR LR LR49 44LR /8 11-1/8 6-5/8 8-3/8 144LR Not available for operation FOR OPTIONS & CCESSORIES SEE PGES 4 & FOR STEM PPLICTIONS SEE BULLETIN 6-SR Page 13 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey Dimensions In

16 BULLETIN 6-G BRONZE SOLENOID VLVES MX. FLUID TEMP. 1 F MX. STTIC PRESSURE 1 TYPE G FULL PORT - NORMLLY CLOSED 1 TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stem Stainless Steel *Pilot Valve Disc er - Brass *Pilot Valve Seal - Buna N (Viton available) *Spring - 30 Stainless Steel *Body Seal - Buna N or Non sbestos Gasket *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, 18 leads - (Class H available) FOR OPTIONS & CCESSORIES SEE PGES 4 & To control the flow of Water, ir, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the pilot and main orifices make the valves ideal for TIGHT SETING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top / C 0 18G /8-4-1/ G /8-4-1/8 133G / /8 0 18G /8-7/8 4-3/ G /8-7/8 4-3/8 133G /8 7-3/ / G / / G / / G / G /8 7-7/ G /8 7-7/ G /8 7-7/ G /8 8-5/8 5-7/8 7-1/8 43G /8 9-5/8 5-7/8 7-1/ G /8 9-5/8 5-7/8 7-1/8 44G / G /8 8 Dimensions In Voltage (C or ) Temperature (See pages 4 & ) UL Listed Valves - Consult Factory 16 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

17 BULLETIN 6-GR BRONZE SOLENOID VLVES TYPE GR FULL PORT - NORMLLY OPEN 1 TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. MX. FLUID TEMP. 1 F MX. STTIC PRESSURE 1 CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Piston - Bronze Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stem Stainless Steel *Pilot Valve Disc er - Brass *Pilot Valve Seal - Buna N (Viton available) *Spring - 30 Stainless Steel *Body Seal - Buna N or Non sbestos Gasket *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, 18 leads - (Class H available) To control the flow of Water, ir, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the pilot and main orifices make the valves ideal for TIGHT SETING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. FOR OPTIONS & CCESSORIES SEE PGES 4 & Voltage (C or ) Temperature (See pages 4 & ) 1 1-1/ C 0 18GR /8 7-1/4-4-1/ GR /8 8-1/ /8 0 18GR / /8 4-3/ GR / / GR /8 3-1/8 4-33GR / GR /4 9-1/ GR /4 9-1/ GR /8 7-1/8 43GR /4 5-7/8 7-1/8 44GR /8 10-5/8 6-5/8 8 UL Listed Valves - Consult Factory Dimensions In Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey

18 BULLETIN 6-D BRONZE SOLENOID VLVES MX. FLUID TEMP. 1 F MX. STTIC PRESSURE 1 TYPE D FULL PORT - NORMLLY CLOSED 3/8 TO PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve opens when energized and closes when de-energized. In this direct acting valve the disc holder assembly is lifted from its seat by the plunger. CONSTRUCTION: (* Wetted parts) *Valve Body - Cast Bronze, Globe Pattern - NPT ends *Disc er - Brass Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Stem Stainless Steel *Spring - 30 Stainless Steel *Body Seal - Buna N *Orifice Seal - Buna N (Viton or Glass Filled Teflon available) *C Shading Coil - Copper *Stem Pin - Inconel Coil - Encapsulated Class B, 18 leads - (Class H available) FOR OPTIONS & CCESSORIES SEE PGES 4 & To control the flow of Water, ir, Gas, Solvents, Vacuum and any other fluids not reactive with construction materials and free of sediment. Buna N seating of the main orifice make the valves ideal for TIGHT SETING, LOW PRESSURE and LOW FLOW conditions. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. 3/ /4 1- C 15 18D /4 5-3/8 - -7/ D /8 6-3/ / D / /8 0 33D /4 6-3/ /8 4 18D / D D /8-4-1/ D / / D /8-7/8 4-3/8.3 33D /8 7-3/ / D / / D / D /8 7-7/ D /8 7-7/ Dimensions In Voltage (C or ) Temperature (See pages 4 & ) UL Listed Valves - Consult Factory 18 Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

19 BULLETIN 6-STN-Y STRINERS Bronze Stainless Steel The presence of foreign particles in an automatic valve may seriously affect its dependability. The installation of a strainer close to the inlet side of the valve is the best means of preventing the entrance of pipe chips, scale, rust, pipe dope, welding slag or sediment into the valve, provided the screen is periodically removed for cleaning. CONSTRUCTION: Strainer bodies have screwed ends. Screens are stainless steel with opening sizes as listed in tables below. Other sizes can be furnished upon request. Liberal straining area provides for fluid passage at minimum pressure drop. Screens are easily removed for cleaning. furnished with NPT blow-off connections unplugged. See charts below for blow-off sizes (C Dim.) CLENING FOR CRYOGENIC & OXYGEN SERVICE: Strainers for Cryogenic applications are degreased and cleaned to keep them free of moisture. Strainers for Oxygen service are degreased and cleaned then black light tested. BRONZE 1/4 TO 3 PIPE SIZE Screen Dimensions In 1/4 ST /4 1/4 3/8 60 Mesh ST /4 1/ ST - -1/4 1/4 Openings ST /16 3/8 1 ST 4-1/ /8 1-1/4 ST 5 3-1/4 4-7/16 3-5/ Diameter ST /16 3-7/8 Perforations ST /8 5-1/16 1 Lined With - 30 Mesh ST / /4 3 ST B C STINLESS STEEL TO PIPE SIZE Screen Dimensions In 60 Mesh ST SS /8 1/ ST 3SS -1/ /16 3/8 1 Openings ST 4SS 3-1/4 4-5/8 3-1/8 3/ Diameter ST 6SS 6-5-5/8 4- Perforations Lined w/30 Mesh ST 7SS B C PRESSURE TEMPERTURE RTINGS MTERIL STEM LIQUIDS 400 F 100 F STINLESS STEEL 7 F 100 F Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey

20 0 MX. FLUID TEMP. 400 F MX. STTIC PRESSURE Except valves listed for 0 FOR OPTIONS & CCESSORIES SEE PGES 4 & K4 14K3 C BULLETIN 6-K STINLESS STEEL SOLENOID VLVES TYPE K FULL PORT - NORMLLY CLOSED TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it. CONSTRUCTION: (*Wetted parts - No Copper Bearing lloys in contact with fluid) *Valve Body Stainless Steel Globe Pattern - NPT ends (For Flanged Ends see Options page 4) *Piston Stainless Steel Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring - Inconel *Body Seal - Non sbestos Gasket *Orifice Seal - Glass Filled Teflon *C Shading Coil - Silver *Stem Pin - Inconel Coil - Encapsulated Class H, 18 leads To control the flow of Corrosive Fluids, Deionized Water, Condensate, mmonias, Vegetable Oils, Fuel Oils, Cryogenics**, Flammable Liquids. Cryogenic fluids include liquid oxygen (-97ºF), liquid argon (-303ºF) and liquid nitrogen (-30ºF). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. ping Weights above apply to Threaded Ends Only (except 3 which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3 STINLESS STEEL VLVES RE SUPPLIED WITH FLNGED ENDS ONLY Dimensions In FOR STEM PPLICTIONS SEE BULLETIN 6-W Page Voltage (C or ) Temperature (See pages 4 & ) Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077 B C D NPT D (Flanged) 1# # /8-7/8 9K /8 3-0 E9K / K /8 6-7/8 9K K /8 7 0 E19K K /8 3-1/4 31K / / K54 E131K K /8 4 41K / K / K K K37 4K / K K49F N/ 44K39F /8 N/ 144K59F N/ 1- ** CLENING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested.

21 BULLETIN 6-KR STINLESS STEEL SOLENOID VLVES TYPE KR FULL PORT - NORMLLY OPEN TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. CONSTRUCTION: (*Wetted parts - No Copper Bearing lloys in contact with fluid) *Valve Body Stainless Steel Globe Pattern - NPT ends (For Flanged Ends see Options page 4) *Piston Stainless Steel Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Non sbestos Gasket *Orifice Seal - Glass Filled Teflon *C Shading Coil - Silver *Stem Pin Stainless Steel Coil - Encapsulated Class H, 18 leads To control the flow of Corrosive Fluids, Deionized Water, Condensate, mmonias, Vegetable Oils, Fuel Oils, Cryogenics**, Flammable Liquids. Cryogenic fluids include liquid oxygen (-97ºF), liquid argon (-303ºF) and liquid nitrogen (-30ºF). Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. ** CLENING Cryogenic valves are degreased & cleaned to keep them free of moisture. Oxygen valves are also black light tested. Voltage (C or ) Temperature (See pages 4 & ) FOR STEM PPLICTIONS SEE BULLETIN 6-WR Page 3 C MX. FLUID TEMP. 400 F MX. STTIC PRESSURE Except valves listed for 0 FOR OPTIONS & CCESSORIES SEE PGES 4 & KR4 14KR /8 7-7/8 9KR / E9KR / KR /4 7-1/8-7/8 9KR KR /4 8-1/8 0 E19KR KR / /4 31KR / / KR54 E131KR KR / KR / KR / KR KR /8 10-1/8 4KR37 4KR /8 10-3/8 5-3/ KR KR49F N/ 44KR39F1 14-3/8 11-1/8 6-5/8 N/ 144KR59F N/ 1- Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey Dimensions In D (Flanged) 1# # ping Weights above apply to Threaded Ends Only (except 3 which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3 STINLESS STEEL VLVES RE SUPPLIED WITH FLNGED ENDS ONLY

22 BULLETIN 6-W STINLESS STEEL SOLENOID VLVES MX. FLUID TEMP. 400 F MX. STTIC PRESSURE TYPE W FULL PORT - NORMLLY CLOSED TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve opens when energized and closes when de-energized. When the coil is energized the pilot valve opens, relieving the pressure above the piston, which is then lifted from its seat by the plunger. Upon de-energizing the coil, a spring closes the pilot valve and opens a bleed passageway to permit pressure to build above the piston and seat it FOR OPTIONS & CCESSORIES SEE PGES 4 & C CONSTRUCTION: (*Wetted parts - No Copper Bearing lloys in contact with fluid) *Valve Body Stainless Steel Globe Pattern - NPT ends (For Flanged Ends see Options page 4) *Piston Stainless Steel Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Pilot Valve Stainless Steel *Spring - Inconel *Body Seal - Non sbestos Gasket *Orifice Seal - Glass Filled Teflon *C Shading Coil - Silver *Stem Pin - Inconel Coil - Encapsulated Class H, 18 leads To control the flow of STEM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top W 114W /8-7/8 3-1/ W / W3 114W /8 6-7/ W / W W4 116W /8 3-1/ W / W16 35W / W W /8 4-36W17 36W W47 14W W19F1 44W9F W49F W49F Dimensions In D (Flanged) 1# 4-1/ / / /8 N/ 9- ping Weights above apply to Threaded Ends Only (except 3 which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3 STINLESS STEEL VLVES RE SUPPLIED WITH FLNGED ENDS ONLY Voltage (C or ) Temperature (See pages 4 & ) Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

23 BULLETIN 6-WR STINLESS STEEL SOLENOID VLVES TYPE WR FULL PORT - NORMLLY OPEN TO 3 PIPE SIZE NO DIFFERENTIL PRESSURE REQUIRED TO OPEN Valve closes when energized and opens when de-energized. When the coil is energized the plunger presses the poppet, closing the pilot orifice, and opens a bleed passageway to permit pressure to build above the piston and seat it. Upon de-energizing the coil, the pilot orifice is opened, relieving the pressure above the piston allowing it to leave its seat. The bottom spring allows the valve to operate at zero pressure drop. CONSTRUCTION: (*Wetted parts - No Copper Bearing lloys in contact with fluid) *Valve Body Stainless Steel Globe Pattern - NPT ends (For Flanged Ends see Options page 4) *Piston Stainless Steel Coil Enclosure - Malleable or Cast Iron, NPS conduit conn. *Poppet Stainless Steel *Stem Stainless Steel *Spring - Inconel *Body Seal - Non sbestos Gasket *Orifice Seal - Glass Filled Teflon *C Shading Coil - Silver *Stem Pin Stainless Steel Coil - Encapsulated Class H, 18 leads MX. FLUID TEMP. 400 F MX. STTIC PRESSURE To control the flow of STEM. Steam must be free of sediment. Valve operates from zero to maximum differential pressure indicated in table. Valve must be mounted in horizontal pipe with solenoid enclosure vertical and on top. Voltage (C or ) Temperature (See pages 4 & ) C FOR OPTIONS & CCESSORIES SEE PGES 4 & WR 114WR /8 7-7/8 3-1/ WR / WR3 114WR /4 7-1/8-7/ WR /4 8-1/8 3-16WR WR4 116WR / / WR /8 3-35WR16 35WR / WR WR / WR17 36WR /8 10-1/ WR47 14WR /8 10-3/8 44WR19F1 44WR9F WR49F WR49F / / / /8 11-1/8 6-5/8 N/ 9- Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey Dimensions In D (Flanged) 1# ping Weights above apply to Threaded Ends Only (except 3 which are Flanged Only) For Flanged Ends contact factory for complete weight and dimensions 3 STINLESS STEEL VLVES RE SUPPLIED WITH FLNGED ENDS ONLY

24 BULLETIN 6-OPT OPTIONL FETURES For Solenoid Valves See Individual Options For vailability For Use With Specific Valve Types BOTTOM MOUNTED OPTIONS Note: Only One Bottom Mount Option Can Be Installed On Each Valve MNUL OVERRIDE (Normally Closed valves only) (Designated by Prefix MO ) Enables manual opening of solenoid valve during power failure or to override automatic controls. DSHPOT (Designated by Prefix DP ) Furnished for clean liquids to reduce water hammer effect sometimes encountered in long pipe runs by slowing valve closing. LEVER (Normally Closed valves only) (Designated by Prefix LV ) Enables rapid opening of solenoid valve. Can be chain operated for use at inaccessible locations. FLOW CONTROL (Normally Closed, NR & MR valves, only) (Designated by Prefix FC ) Provides a manual method of reducing or throttling the flow. MOUNTING STUD (Designated by Prefix MS ) 3/8-16 thread can be furnished in bottom of body to facilitate mounting on bracket. (Not available on, - and 3 ) DRIN (Normally Closed, NR & MR valves, only) (Designated by Prefix DR ) - 1/4 NPT plug supplied in bottom of valve to facilitate draining of liquid from valve body. OTHER OPTIONS PILOT TP (Designated by Prefix PT ) Type D, G & GR Valves can be furnished with 1/8 tapped hole for pilot connection or pressure gauge. DIN CONNECTOR (Designated by Suffix DN ) Provides 3 prong connector for easy power connect / disconnect. Not available for Explosion-Proof. 4 HUM FREE : (No C Hum/Buzz) (Designated by Suffix HF ) - The HUM FREE option eliminates the C hum associated with C operated solenoid valves. Enables valves to be used where an C hum would not be acceptable and C is the only power source available. IE: Hospitals, labs, schools (class rooms), homes, office environments etc. & when 4 vac is required for 40 series valves. Leak / Dead Tight: (Normally Closed valves only) (Designated by Suffix LT ) - The Leak / Dead Tight Option offers soft resilient seating or gapless seal for low pressure applications or less. Consult Factory for Pressure and Valve Type availability. Flanged Ends for SS Valves: (Designated by Suffix F1 for 1 lb or F3 for lb Flanges) vailable on stainless steel valves. (Flanged ends for bronze valves available through our Clark-Cooper Division, see bottom of page 3). Explosion-Proof and Watertight Solenoids: (Designated by Prefix F ) are Explosion-proof and NEM 4, 7C & D, 9E, F & G suitable for use in hazardous locations requiring Class I, Groups C & D & Class II Groups E, F, and G equipment. NEM 4X: (Designated by Prefix F ND Suffix ZP ) are suitable for use in locations requiring a NEM 4X designation. ZP (Zinc Plating) replaces the standard paint used on the Coil housing (cup and base). The additional corrosion protection satisfies NEM 4X requirements. Internal construction, pressure ratings, power consumption, and external dimensions are the same as for standard valves. Nickel Plating: (Designated by Suffix NP ) - Plating is Thick Meets Mil Spec. C6074 Universal Mount Valves For Mounting In Vertical Runs (See Magnatrol Universal Mount Catalog 6-UM) Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077

25 BULLETIN 6-POS/IND POSITION INDICTORS For Normally Closed Solenoid Valves Position Switches CONSTRUCTION: Housing Stainless Steel with NPT Conduit Connection Contact - SPDT (Single Pole/Double Throw) Lead Wires - 36 inches long, 18 gauge standard leads potted-in PVC Switch is activated by a ferromagnetic target attached to the valve s piston PS shown with valve body adaptor PS - General Purpose/NEM 4, 4X PSF - Explosion Proof SPDT Contact Electrical Rating: 10 VC / 4 40 VC / 48 V 1 V & V The PS and PSF can be wired C or, N/O or N/C, consume no power to operate, and leave no current leakage or voltage drop Position Switches With LED Visual Indication Position Switch on right shown energizing Red LED PL - General Purpose/NEM 4, 4X PLF - Explosion Proof SPDT Contact Electrical Rating: 10 VC / 4 V 10 VC 4 V without the LEDs) The PL and PLF can be wired C or, N/O or N/C mbiant Temperature: -40 F to 1 F (106 C) PS General Purpose & Water Tight (SPDT Switch) shown on 3 Stainless Steel Valve NOTE: ONLY ONE BOTTOM MOUNTED OPTION CN BE INSTLLED ON ECH VLVE For multiple switches and where a switch and a bottom mounted option are required, contact our Clark Cooper Division. (See bottom of Page 3) Position Display - Visual Indication ONLY PD - General Purpose / NEM 4, 4X / Explosion Proof CONSTRUCTION: Housing - Clear High-Strength Polycarbonate Visual indication that valve is Open / Closed When the valve is in the closed position, a ferromagnetic target attached to the valve s piston, lifts a green colored magnet into the adapter hiding it from view. When the valve is energized, (open position), the magnet drops down to a visible position. Position Indicators for Normally Closed Valve Only vailable on Type, S, L, K, W & G Valves HOW TO ORDER: Indicate Option when Ordering: Use the appropriate Prefix: PS, PSF, PL, PLF, or PD Example: PS1844 indicates a Position Switch mounted on a Type 1844 valve. Magnatrol Valve Corporation P.O. Box Fifth venue Hawthorne New Jersey 077