Vallejo LC 4", 6" - Pendant
|
|
|
- Roy Rose
- 5 years ago
- Views:
Transcription
1 Vallejo LC 4", 6" - Pendant SIP in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Rethink layered lighting with this attractive alternative to traditional solid cylinders. This luminous cylinder's integral downlight delivers correct light levels where needed while ambient illumination adds light to vertical planes, opening up spaces. The luminous body also provides a gentle visual warm-up to the independently controlled higher output downlight source, lowering the contrast ratio and increasing comfort. Meticulous attention to detail ensures suitability for the highest-end applications. The Vallejo family consists of 4" to 12" diameter luminous cylinders. FEATURES & BENEFITS Ambient and downlight components are standard with separate switching and 0-10v dimming Up to 1100 lumen performance downlight is optically shielded and available in three beam spreads The ambient illumination component provides comfortable source of brightness recognition A glowing aperture on the top complements the bi-planar detail on the bottom of the fixture, maximizing visual appeal from all viewing angles Integrated LED luminaire design features a sophisticated passive cooling system with integrated heat sink Handcrafted in USA SPECIFICATIONS LIGHT SOURCE: White LED light engine LUMEN MAINTENANCE: L80 life = 55,000+ hours EFFICACY: Up to 90 lm/w delivered CCT: 3000K, 3500K, or 4000K VOLTAGE: V standard DRIVER: Class II power supply integrated in canopy standard; remote optional MAX AMBIENT OPERATING TEMP: 35 C (95 F) DIMMING: 0-10V controls standard to 5% on LED light engines INTEGRATED SURGE PROTECTION: LED components are protected against minor surge events P: SPIteam@spilighting.com Last Revised: 12/24/2018 Design Rights Reserved SIP of 5
2 DIFFUSER: White matte acrylic diffuser standard; white gloss acrylic diffuser optional CONSTRUCTION: Aluminum FINISH: End plates and mounting components finished to match. To specify separately, contact factory. Choose from more than 30 thermoset polyester powder coat paint colors. RAL, Pantone, or custom finishes available upon request. MODIFICATIONS: Consult factory for all modification requests APPROVALS: ETL listed to UL standards (US & Canada) for use in damp locations; not recommended for exterior applications DIMENSIONS W 4 in 10.2 cm H 6.2 in 15.7 cm Mounting Weight Approximate: 5 lb (3 kg) OAH 60 in cm CONFIGURATOR To configure your spec sheet online, go to Not all options are available in all configurations; consult factory for details. Required Field * Catalog Light Source: Primary Finish: Voltage: Mounting: Lamp Options: Diffuser: Light Source Option: Other Than Standard Options: A B C D E F G A - LIGHT SOURCE * To ensure color consistency, SPI uses precise bin selection and strict quality processes to maintain a 3-step (MacAdam) SDCM on all white LED lampings. Published LED luminaire wattages are calculated using a typical power supply efficiency of 88%; exact wattages may vary based on application. Alternative wattages available upon request. L4W White 4W LED Light Engine Delivered Lumens: 360 See last page for finish options P: SPIteam@spilighting.com Last Revised: 12/24/2018 Design Rights Reserved SIP of 5
3 B - VOLTAGE V Universal Voltage C - MOUNTING Mounts to standard 4" octagonal junction box. White power cord suspension standard (adjustable up to OAH). Integrated power supply canopies feature a 45 degree swivel. Remote driver option available for minimal canopy profile with a 22.5 degree swivel. Stem mounting optional. Choose a mounting from below: DF_PSC 5.5" Power Supply Canopy with Cord Suspension (default) CAS 5.5" Canopy & Stem, Remote Supply CAC Power Cord Suspension with Remote Power Supply & 5" Canopy PSS 5.5" Power Supply Canopy & Stem PSC CAS CAC PSS D - LAMP OPTIONS Delivered lumens shown are at 4000K CCT; apply multiplier for delivered lumens at other CCT. 3000K K CCT 3500K K CCT 4000K 4000K CCT 1 Apply.95 multiplier for delivered lumens 2 Apply.97 multiplier for delivered lumens E - DIFFUSER DF_MA01 Matte Acrylic Diffuser Lens (default) OA White Gloss Acrylic Diffuser MA01 OA P: SPIteam@spilighting.com Last Revised: 12/24/2018 Design Rights Reserved SIP of 5
4 F - LIGHT SOURCE OPTION * If you re specifying a downlight option, layer the ambient and downlight IES files. Please choose one: 10W-19 Spot 10W (800 delivered lumens) Downlight - 19 Beam 10W-35 Narrow 10W (800 delivered lumens) Downlight - 35 Beam 10W-45 Medium 10W (800 delivered lumens) Downlight - 45 Beam 14W-19 Spot 14W (1100 delivered lumens) Downlight - 19 Beam 14W-35 Narrow 14W (1100 delivered lumens) Downlight - 35 Beam 14W-45 Medium 14W (1100 delivered lumens) Downlight - 45 Beam No DL No Downlight 10W-19 Spot 10W-35 Narrow 10W-45 Medium 14W-19 Spot 14W-35 Narrow 14W-45 Medium G - OTHER THAN STANDARD OPTIONS OAH Pendant suspension length other than standard Length: P: SPIteam@spilighting.com Last Revised: 12/24/2018 Design Rights Reserved SIP of 5
5 Available Finishes Not all finishes are available in all configurations; consult factory for details. Paint Colors PT01 PT02 PT03 PT04 PT05 Super White White Morning Light Warm White Putty PT06 PT07 PT08 PT09 PT10 Warm Beige Light Taupe Medium Taupe Medium Grey Dark Grey PT11 PT12 PT13 PT14 PT15 Black Dark Chocolate Warm Grey Light Grey Sage PT16 PT17 PT18 PT19 PT20 Spruce Red Deep Red Blue Dark Green PT21 PT22 PT27 PT28 PT29 Pearl White (Metallic) Platinum (Metallic) Deep Copper (Metallic) Dark Stainless (Metallic) Red Brass (Metallic) PT31 PT32 PT33 PT40 PT41 Medium Bronze (Metallic) Dark Bronze (Metallic) Dark Blue Yellow Orange PT42 PT43 PT44 PT45 PT46 Sky Blue Teal Green Purple Aluminum (Metallic) PT47 PT48 PT49 PT51 Deep Red Brass (Metallic) Brass (Metallic) Bronze (Metallic) Matte White P: Last Revised: 12/24/2018 Design Rights Reserved SIP of 5
Pavo 4" SIP in DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS JOB NAME: TYPE: NOTES:
Pavo 4" SIP12125 JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Minimalist form meets functional lighting with the Pavo pendant. Characterized by its meticulous attention to detail, Pavo features even
Pavo 8", 10", 12" SIP in DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS JOB NAME: TYPE: NOTES:
Pavo 8", 10", 12" SIP12069 JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Make an impression with this stately fixture. State-of-the-art integrated LED technology balances ambient light with minimal
Pavo 2" SIP in DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS JOB NAME: TYPE: NOTES:
Pavo 2" SIP12133 JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Create a striking visual accent with this slim 2" diameter pendant. Even illumination (top to bottom and radially) and well-finished
Lyon - Ceiling. SIC in DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS JOB NAME: TYPE: NOTES:
Lyon - Ceiling SIC12106 49 in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Lyon is a family of small-scale linear LED fixtures that delivers impressive performance at an affordable price. Designed
Zynn Lines - Pendant. AIP in DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS JOB NAME: TYPE: NOTES:
Zynn Lines - Pendant AIP12116 49 in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION With a cross-section of just 1.25", Zynn Lines suspends slim lines of light in contemporary spaces. Its seamless housing,
Zynn Ring. AIP in DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS JOB NAME: TYPE: NOTES:
Zynn Ring AIP12096 48 in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION With a cross-section of just 1.25", the Zynn Ring is a stunning accent in contemporary spaces. It provides a comfortable source
Lightruss Rail DESCRIPTION FEATURES & BENEFITS PROJECT DETAILS LRU Job Name: Type: Notes:
Lightruss Rail LRU12077 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION At just 2.5 inches deep, Lightruss Rail is the most compact product in the revolutionary Lightruss family. Designed with integrated
Chatham - Pendant DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS AIP8180. Job Name: Type: Notes:
Chatham - Pendant AIP8180 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION The traditional spun metal trim ring and decorative finial create a traditional look for this pendant, making it perfect for
Lyon Exterior - Wall. SEW in DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS JOB NAME: TYPE: NOTES:
Lyon Exterior - Wall SEW12114 49 in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Lyon is a family of small-scale linear LED fixtures that delivers impressive performance at an affordable price. Designed
Echo Shapes 9.0 LED. EEW in DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS JOB NAME: TYPE: NOTES:
Echo Shapes 9.0 LED EEW12091 13 in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Whether you want to deliver low-glare indirect illumination, accentuate the verticality of the space, or directly light
Madrid - Pendant DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS AIP8508. Job Name: Type: Notes:
Madrid - Pendant AIP8508 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION Our shallow bowl collection offers simple classic lines in a low-profile alternative. When low to mid-height ceiling applications
Dublin (4) Bowl Chandelier
Dublin (4) Bowl Chandelier AIP8623 25 in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Our acorn collection was inspired by the need to offer proven optical solutions within adaptive re-use, traditional,
Chatham - Wall DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS AIW8306. Job Name: Type: Notes:
Chatham - Wall AIW8306 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION The simplicity of the Chatham luminous quarter sphere with traditional spun metal trim ring is perfect for a host of applications
Clayton - Ceiling DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS AIC8108. Job Name: Type: Notes:
Clayton - Ceiling AIC8108 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION The spun metal trim ring creates a traditional look for this ceiling mount fixture making it perfect for retail spaces, conference
Vienna - Ceiling DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS AIC8855. Job Name: Type: Notes:
Vienna - Ceiling AIC8855 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION Our cone collection offers a look previously not available in the market with high-output optical packages. We've taken difficult
Echo Round 3.5 LED - Wall
Echo Round 3.5 LED - Wall EIW11905 50 in JOB NAME: TYPE: NOTES: PROJECT DETAILS DESCRIPTION Echo Round 3.5 LED features a compact housing, integral power supply, and efficient optical design. This unobtrusive
Minsk - Ceiling DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS AIC8874. Job Name: Type: Notes:
Minsk - Ceiling AIC8874 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION Our drum collection was inspired to create something different and new in the world of luminous lighting products, yet we find
Harbor - Mesh DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS AIW8275. Job Name: Type: Notes:
Harbor - Mesh AIW8275 Job Name: Type: PROJECT DETAILS Notes: DESCRIPTION Highlighting the Harbor are three 1/2" vertical solid brass bars. The perforated, polished stainless steel lens with a Mylar backing
Styk Wall - Stem DESCRIPTION FEATURES & BENEFITS SPECIFICATIONS PROJECT DETAILS SIW Job Name: Type: Notes:
Styk Wall - Stem SIW12139 Job Name: Type: PROJECT DETAIS Notes: DESCRIPTION Styk was built to provide the most lumens with the smallest luminaire package, while optimizing life. Not limited to decorative
Model Dimming Output CRI C.C.T. Reflector Optical Accessories Shell Color Suspension Options AP
PROJECT Job Notes Type Part # SPECIFICATIONS Source Cree CXB Integrated LED Array, up to 161 lm/w C.C.T. 2700K, 3000K, 3500K, 4000K or 5000K Color Consistency 3x3 SDCM (MacAdam) CRI (Ra) 80 or 92 Driver
Model Location Dimming Location Output CRI * C.C.T. Reflector Shell Suspension Options Q4SP
QUBE 4 SX PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 4 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1
Model Location Dimming Location Output CRI * C.C.T. Reflector Shell Suspension Options C3SP
PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 3000 lumens C.C.T. 2700K, 3000K, 3500K or 4000K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 40K to 70K, Duv
Model Location Dimming Location Output CRI * C.C.T. Reflector Shell Color Suspension Options Q4LP
QUBE 4 LX PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 5 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1
Model Location Dimming Location Output CRI * C.C.T. Reflector Shell Color Suspension Options C2SP
PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 2 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1 CRI (Ra)
MODO. Duomo, large. pendant PROJECT SPECIFICATIONS ORDERING LOGIC. Job. Notes. Type. Part #
PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato X LED module - up to 4 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1 CRI (Ra) 83
Model Location Dimming Location Output CRI * C.C.T. Reflector Shell Color Suspension Cord Options C2LY
PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 2 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1 CRI (Ra)
Model Location Dimming Location Output CRI * C.C.T. Reflector Shell Color Suspension Cord Options C4LY
CORE 4 LX PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 5 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1
NOVA. large, round pendant PROJECT SPECIFICATIONS ORDERING LOGIC. Job. Notes. Type. Part #
PROJECT Job Notes Type Part # SPECIFICATIONS Source Cree LED - up to 15 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 3x3 SDCM (MacAdam Ellipse) CRI (Ra) 8 or 92 Driver Included Driver Location Internal,
CORE 400 CX pendant !"# DIMMABLE PROJECT SPECIFICATIONS ORDERING LOGIC. Job. Notes. Type. Part #
CORE 4 CX PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 5 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 4K to 7K, Duv +/-.1
CORE 300 CX pendant !"# DIMMABLE PROJECT SPECIFICATIONS ORDERING LOGIC. Job. Notes. Type. Part #
PROJECT Job Notes Type Part # SPECIFICATIONS Source Xicato XTM LED module - up to 3000 lumens C.C.T. 2700K, 3000K, 3500K or 4000K Color Consistency 1x2 SDCM (MacAdam) along BBL, CCT +/- 40K to 70K, Duv
S3=85 x 85 square lens WW=Wall Wash lens DW=Double WW lens
PROJECT Job Notes Type Part # SPECIFICATIONS Source Cree LED - up to 12 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 3x3 SDCM (MacAdam Ellipse) CRI (Ra) 8 or 92 Driver Included Driver Location Remote
Twin PENDANT CATALOG CODES SPECIFY CATALOG CODE A B C D E SERIES HANGING SYSTEM SIZE DIFFUSER FINISH*
PROJECT NAME: TYPE: Twin PENDANT QTY: FEATURES DUAL DIRECTION ILLUMINATION WITH ACRYLIC TOP AND BOTTOM LENSES FIXTURES CAN BE CLUSTERED TOGETHER TO CREATE LARGE SCALE INSTALLATIONS CUSTOMIZABLE SIZES AND
PENDANT FORMS - DIRECT
Project Type Notes Direct Lens DML Direct Louver lank 1 3 /16 1 3 /16 1 3 /16 A configuration drawing is required Factory is available for assistance See page 2 for example of how to specify 2 Mini Driver
6" Round Downlight. Product Overview Recessed Round Downlight Wattage: 38. Fixture Type. Performance Chart. Electrical Data. 6" Round Downlight
6" Round Downlight Features The 6" downlight shines new light on your bigger jobs. The downlight performs perfectly in large retail and commercial spaces. Designed for higher ceilings, this downlight features
SERIES C68SLB79V Lensed Vero LED Cylinder Downlight Lumen Bridgelux
APPLICATION A decorative cylinder for surface, wall, cable or pendant mount is ideal for applications that require high lumen output, long lamp life and energy saving benefits of LED technology. PRODUCT
STUDIO. Luminaire characteristics: Power input: 12.5W to 49W Lumens: 1300 to 4600lm (for 3000K, 80CRI) Luminaire efficacy: Up to 107lm/W.
Page: 1 of 6 Collection of pendants luminaire for commercial and institutional applications. Canopy mounted, with complete range of optical accessories, Studio is a flexible solution for general lighting
LED LINEAR QUICK SUMMARY CO W SI MODEL CORTANA
LED LINEAR CORTANA This simple and elegant suspended LED linear light with wide optics is ideal for general uniform ambient lighting applications where clean, modern architectural design is required. Use
Luminaire characteristics: Source: Lumen maintenance: Optics: Material: Mounting: Electrical: Dimming: Finish: Weight: Warranty: Ratings:
Page: 1 of 6 Collection of pendants luminaire for commercial and institutional applications. Canopy mounted, with complete range of optical accessories, Studio is a flexible solution for general lighting
Outputs between listed min and max are available. Consult factory for outputs outside of the listed range.
Project Type Notes Shown with VL optic Shown with SO lens PERFORMANCE PER LINEAR FOOT AT 35K (VL) NOMINAL LUMEN OUTPUT TOTAL lm/ft INPUT WATTS EFFICACY UP DOWN 1 lm/ft 25 lm/ft 125 lm/ft 55 W 93 lm/w 1
L CHTM. LCH Lensed LED Channel LED. Technical Specifications. LCH Lensed LED Channel Configuration. Project Catalog Number Type Date
L CHTM lensed led channel The LCH series of low profile, lensed LED channels provides superior energy efficiency and a longer, maintenance-free operating life over the traditional T5 and T8 fluorescent
NOVA. large, square surface mount. Installation options for recessed or surface mounted j-box & conduit PROJECT SPECIFICATIONS ORDERING LOGIC.
PROJECT Job Notes Type Part # SPECIFICATIONS Source Cree LED - up to 2 lumens C.C.T. 27K, 3K, 35K or 4K Color Consistency 3x3 SDCM (MacAdam Ellipse) CRI (Ra) 8 or 92 Driver Included Driver Location Internal,
Promenade TM Series LED PRMD
FEATURES Reliable, uniform, glare free illumination Types II, III, IV, V and custom distributions 1 3000K, 4000K, 5000K CCT 0-10V dimming ready Integral surge suppression Life thermal protection 13 standard
SERIES C68QSLCDB79V Low Voltage LED Cylinder for Remote Driver/Power Supply Lumens
APPLICATION Low voltage LED lighting fixtures using remote driver platforms are ideally suited to applications that require easy access to LED drivers for routine maintenance and improved LED life and
light
light ATLAS light CORE STRENGTH A new standard for an essential fixure. Atlas is a family of high performance ambient fixtures combining sophisticated detailing with intelligent functionality. Available
Recessed Square. Downlight. BASYS with LED Light Engine BS4DLED BS4D LED. Type: Project: online Find it Fast 756. IBEW Union Made BASYS LED HOUSING
BASYS with LED Light Engine Recessed Square " Type: online Find it Fast 75 BSD LED FIXTURE WATTAGE CCT (K) DISTRIBUTION DRIVER OPTIONS BASYS Square " Recessed Direct White LED CRI = 85 typical R9 = typical
SURFACE - LINEAR - FLUSH
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K SO Spotless Lens Mini Driver ML Mini Driver B Blank SO lens Option only Micro louver Option only NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 2 lm/ft
POP CORE ROUND 24 LED
PROJECT: TYPE: NOTES: Shown with 3. optics Shown with optics DESCRIPTION POP Core features a simple, uniformly luminous diffuser and delivers up to 110. The diffuser and light engine form a fully enclosed
LINEAR DOWNLIGHT - PENDANT DIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 3500K MICROGROOVE SPOTLESS LENS NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 0up/100down at 900 lm/ft 0 880 lm/ft 10 W/ft 87 lm/w MICROGROOVE
J TO 4000 LUMEN 8 LED CYLINDER HYPERBOLIC/PARABOLIC/WALLWASH OPEN APERTURE LC8 SERIES DIMENSIONS 1-1/4
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Lumen packages suitable for ceiling heights ranging from 8 to over 50 Efficacies up to 80 lm/w Superior-quality white LED light output using Chip on Board technology
HALF MOON DAMP LOCATION
GLOBO SERIES PROJECT: TYPE: RD - Red Baron LG - Lime Green PT - Platinum Silver BL - Blue Streak SERIES LUMENS 1 CCT DRIVER / DIMMING 2 MOUNTING 5 FINISH 9 15L 1500 Lm 27L 2700 Lm 27K 30K 35K 40K 2700K
LASER BLADE DOWNLIGHT - NEW CONSTRUCTION WITH HOUSING - INTEGRAL
DOWNLIGHT - NEW CONSUCTION WITH HOUSING - INTEGRAL Page: of 6 Laser blade offers miniaturized dimensions with high performance acrylic diffuser integrated in a polycarbonate baffle for maximized visual
PENDANT MOUNT - DIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K CABLE 2 1 /4 STEM 2 1 /4 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft
PENDANT MOUNT - DIRECT/INDIRECT
Project Type Flush Spotless Lens - down Glo Lens - up 4 1/2" SHIELDING INDIRECT SHIELDING DIRECT StepLens 1.25 - down SurroundLite up Flush Spotless lens - down SO Spotless Lens SO SurroundLite SurroundLite
SLIM PENDANT DIRECT. Project. Type. Notes. Ordering Guide PERFORMANCE PER LINEAR FOOT AT 3500K 1 / 8. axislighting.com. Shown with VL optic
Project Type Notes Shown with SO lens Shown with louver Shown with VL optic PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 1 3/8" up/1down at 8 lm/ft
REVO LED PENDANT DIRECT/INDIRECT W W W. L U M E N W E R X. C O M
DESCRIPTION PROJECT: The Revo pendant offers a fresh interpretation of a classic shape, both attractive and functional. Just 2 3/8" TYPE: in diameter, Revo delivers precise and well shielded illumination
PRIME PRIME 4 LED ARCHITECTURAL ROUND FLANGED DOWNLIGHT
TYPE: USE OF PRODUCT The 4" Prime Downlight Series is the ideal product for architectural energy efficient lighting in commercial and residential applications. Available in an assortment of color temperatures,
light FULL BLEED APPLICATION SHOT RENDERING
A6 FULL BLEED APPLICATION SHOT RENDERING A6 ANATOMY POWERFUL PERFORMANCE High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design. 4.44 3.44 FLEXIBLE SUSPENSION The variety
light
light ATLAS light CORE STRENGTH A new standard for an essential fixture. Atlas is a family of high performance ambient fixtures combining sophisticated detailing with intelligent functionality. Available
Project. Type. Notes. (1) D dimming (0-10V) 5% standard
Project Type Notes PERFORMANCE AT 35K NOMINAL LUMEN OUTPUT TOTAL lm/ft INPUT WATTS EFFICACY UP DOWN 125 lm/ft 1 lm/ft 225 lm/ft 26 W/ft 87 lm/w 1 lm/ft 1 lm/ft 2 lm/ft 23 W/ft 89 lm/w 1 lm/ft 5 lm/ft 15
DESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable
ORDER GUIDE Shown with ARO2 optics DESCRIPTION PROJECT: Via 2 features our Asymmetrical Lens Optic for smooth, comfortable TYPE: and efficient illumination of vertical NOTES: surfaces. Via 2 Asymmetric
LASER BLADE DOWNLIGHT - NEW CONSTRUCTION WITH HOUSING - INTEGRAL
DOWNLIGHT - NEW CONSUCTION WITH HOUSING - INTEGRAL Page: of 6 Laser blade offers miniaturized dimensions with high performance acrylic diffuser integrated in a polycarbonate baffle for maximized visual
PENDANT ASYMMETRIC MOUNT - DIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 3 3 /8 3 3 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 5 lm/ft 4.5 W/ft 11 lm/w 6 lm/ft 5.5 W/ft 19 lm/w 75 lm/ft 6.9 W/ft 16 lm/w 1 lm/ft 9.4 W/ft
LUMINAIRE ID DIRECT OPTICS INDIRECT OPTICS LIGHT SOURCE CRI DIRECT LUMEN PACKAGES. LED - high performance LED
ORDER GUIDE Shown with ARO2 optics DESCRIPTION Via 3 features our Asymmetrical Lens Optic for smooth, comfortable and efficient illumination of vertical surfaces. Via 3 Asymmetric offers a wide range of
Linear. MicroSquare gen2 suspended
Linear MicroSquare gen2 suspended Project: Spec Type: Catalog No: Qty Line Notes: 2201LxGLN /4000K Ordering guide Philips Ledalite s MicroSquare gen2 has been re-engineered to furnish your space with the
WALL LO-OUTPUT. Project. Type. Notes
Project Type Notes PERFORMANCE/LINEAR FT AT 3000K AND 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY* 3 9/16 300 lm/ft 2.9 W/ft 104 lm/w 400 lm/ft 3.9 W/ft 102 lm/w 500 lm/ft 5.0 W/ft 100 lm/w 1 5/8"
PENDANT - LINEAR WITH COMBINED DISTRIBUTIONS
Micro lens shown Direct Lens STCO Direct louver Ordering Guide Indirect Indirect Asymmetric See page 4 for Accent section view PRODUCT ID TOTAL LENGTH & NOM. LUMENS/FT - INDIRECT TOTAL LENGTH & NOM. LUMENS/FT
NOVENTA NV3.5 SUSPENDED, WALL, SURFACE, RECESSED. STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections
NOVENTA NV3.5 SUSPENDED,, SURFACE, RECESSED STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections LAMPING LED - Direct or Indirect - 80/90 CRI - 3000K/3500K/4000K
WALL MOUNT - DIRECT/INDIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K 4 5 /32 5 1 /2 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY UPLIGHT DOWNLIGHT 4 lm/ft 4 lm/ft 6.7 W/ft 124 lm/w 4 lm/ft 5 lm/ft 7.6 W/ft 123 lm/w 4 lm/ft
4DS 4.5 Downlight Square
CATALOG #: - : 5 : 6-1/2 4-1/2 5-1/2 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Dim to warm from 1800K to 3000K CCT, minimum 95 CRI 4 inch aperture is unobtrusive in small scale spaces Square
Decorative. PS (cylindrical) Vetro Pendants
Decorative PS (cylindrical) Project: Location: Cat.No: Type: Lamps: Notes: Qty: Vetro Pendants Power Heads Two-piece cast and machined aluminum outer housing contains electrical components. Hand-blown
Big Ass Light High Powered Fixture
Big Ass Light High Powered Fixture Our customers told us they wanted more lighting options, and we heard them. The HPF Series is packed with the same bright and efficient performance Big Ass Light is known
U060 LIGHTWAY INDEX GRAZERS WASHERS AMBIENT
Lighting is about creating an environment that uses light as the main medium of expression. It means having one s work blend seamlessly with the architecture, often at the risk of not being seen. It s
ROUND PENDANT LED HIGH BAY HP Gen. 2 SERIES
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 5 ROUND PENDANT LED HIGH BAY PRODUCT DESCRIPTION: The Round Pendant LED High Bay blends high performance with a premium aesthetic that
TECHNICAL SPECIFICATIONS
High Bay LED PRODUCT HIGHLIGHTS Construction Heavy-duty single extruded aluminum heatsink designed to perform in ambient temperatures up to 67 F (75 C). (See ambient operating temperature specifications
2-125-T Deep Aurora BRO
2-125-T Deep Aurora BRO FEATURES P. 604.464.5644 T. 1.800.464.9544 F. 604.464.0888 TY WA R R A N SEMBLED AS RNIA T FO I LI T N 13 E TL 2-125-T-Deep-Aurora-BRO-Specs Subject to change without notice Rev
SURFACE MOUNT. See page 3 for DLC Approved options
Project Type Notes Linear version shown Flush 1 3/4 3 1 1/2 2'x6' ceiling kit shown.5 1 3/4 3 1/2 1 1/2 4'x4' ceiling kit shown 2 1 3/4 3 2 PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT
SPECFIT 6" Retrofit Downlight AD6 DIM010 UNV ADR6. Project: Part#: Type: Ex: AD6-LES-9040-DIM010-UNV-MD-ADR6-CC
Project: Part#: Type: SPECFIT " Retrofit Downlight Mechanical SPECFIT retrofits existing commercial housings. Spring action clips to accommodate ½ to ceiling thicknesses. Fixture with remote driver installs
Linear. FloatPlane Suspended LED
Linear FloatPlane Suspended LED Project: Spec Type: Catalog No: Qty Line Notes: 24x5L2EAA Ordering guide With FloatPlane LED, it s easier than ever to integrate sleek and sporty style into your layout
SPECFIT 8" Retrofit Downlight AD8 DIM010 UNV ADR8. Project: Part#: Type: Ex: AD8-LES-9040-DIM010-UNV-MD-ADR8-CC
Project: Part#: Type: SPECFIT " Retrofit Downlight Mechanical SPECFIT retrofits existing commercial housings. Spring action clips to accommodate ½ to 2 ceiling thicknesses. Fixture with remote driver installs
solana semi-indirect indirect Low profile pendant with adjustable optics
semi-indirect indirect pendant Low profile pendant with adjustable optics Indirect lighting reduces glare and harsh shadows creating a comfortable environment and improving human performance. Lam Lighting
SURFACE MOUNT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K 3 5 /8 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft 1.4 W/ft 96 lm/w
AXLE LED PENDANT ASYMMETRIC W W W. L U M E N W E R X. C O M
PROJECT: TYPE: NOTES: DESCRIPTION Axle is an elegant and compact LED linear accent luminaire providing efficient asymmetric light distribution. Softly curved, Axle measures just 2 11/16" by 3 11/16". With
2 LED downlight. Discreet styling, bold performance. RABWEB.COM
2 LED downlight Discreet styling, bold performance. RABWEB.COM 888 722-1000 Clean, unobtrusive design delivers smooth and abundant light from an aperture just over 1 inch wide. 8W replaces 50W MR16 with
6DS 6 Downlight Square
CATALOG #: L7 - L13: 5-7/8 L21: 7-3/8 6 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Dim to warm from 1800K to 3000K CCT, minimum 95 CRI Beam angles ranging from 25º narrow to 65º wide for tailored
Applies to both UP & DOWN. Outputs between listed min and max are available. Consult factory for other lumen packages
Project Type Louver Notes Satin Ribbed Lens Spotless Lens PERFORMANCE PER LINEAR FOOT AT 35K (SR) 2 1/2" NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 8up/2down at 1 lm/ft 8 lm/ft 2 lm/ft
WALL MOUNT DIRECT/INDIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY LENS UPLIGHT DOWNLIGHT Flush lens shown Flush.5 2 FLUSH 75 lm/ft 5 lm/ft 11.9 W/ft 15 lm/w.5" 75 lm/ft 5
McGraw-Edison TT TOPTIER LED
DESCRIPTION The TopTier parking garage, canopy and low-bay luminaire is an innovative solution that delivers an unparalleled combination of performance and visual comfort. The patented WaveStream optical
2 1/2. Applies to both UP & DOWN. Specify quantity. Requires 8" blank See integrated controls guide for more details.
Project Type Louver Notes Satin Ribbed Lens Spotless Lens PERFORMANCE PER LINEAR FOOT AT 3500K (SR) 2 1/2 NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 80up/20down at 1000 lm/ft 800 lm/ft
RECESSED ASYMMETRIC MOUNT. Project. Type. Notes TECHZONE TM AND LOGIX TM COMPATIBLE
Project Type Notes 5 1/32" PERFORMANCE PER LINEAR FOOT AT 4000K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 750 lm/ft 7.5 W/ft 97 lm/w * Based on a 4 foot luminaire using one driver Please consult factory
SURFACE MOUNTED. Project. Type. Notes. culus Listed Type I.C.
Project Type Notes PERFORMANCE AT 4000K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 2400 lm 22.76 W 103 lm/w 4000 lm 41.17 W 97 lm/w 5000 lm 53.46 W 94 lm/w 6500 lm 70.65 W 92 lm/w 7700 lm 85.33 W 90 lm/w
PENDANT DIRECT-INDIRECT. SO or MSO PRODUCT ID LIGHT ENGINE NOMINAL LUMENS/FT (#/#) CRI COLOR TEMPERATURE SHIELDING
Project Type Notes MSO - micrgroove spotless lens CONTROL SENSORS 5 LED BOARD & DRIVER YEAR LUMINAIRE WARRANTY SO - spotless lens SO - spotless lens 3 5 /8 3 15 /16 Ordering Guide ZESQDI MSO - microgroove
6DR 6 Downlight Round
- : 6-5/8 : 7-3/8 CATALOG #: ø6 ø7 TYPE: PROJECT: NEW CONSTRUCTION AND REMODEL FEATURES Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane Dim to warm from 1800K
Cubic SurroundLite TM
Project Type VL Optic Notes Spotless Lens Louver PERFORMANCE PER LINEAR FOOT AT 3500K (SR) 6 1/16 2 1/8 NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 75up/25down at 1000 lm/ft 800 lm/ft
PENDANT MOUNT - DIRECT. Project. Type. Notes
Project Type Notes Cable 3 3 /8 Stem 3 3 /8 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.3 W/ft 122 lm/w 5 lm/ft 4.3 W/ft 117 lm/w 75 lm/ft 6.8 W/ft 11 lm/w 1
BLACK BODY DIMMING 800/1300 LUMEN 8 LED CYLINDER HYPERBOLIC / PARABOLIC / WALLWASH / OPEN APERTURE LC8 SERIES
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Black Body Dimming duplicates halogen dimming, offering a soft, natural, warm glow as light levels are reduced CCT warms from to 1K, while staying on the Black
SURFACE ASYMMETRIC MOUNT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 3500K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 400 lm/ft 3.7 W/ft 109 lm/w * Based on a 4 foot luminaire using one driver Please consult factory for
CATALOG CODES SPECIFY CATALOG CODE A B C D E SERIES HANGING SYSTEM SIZE DIFFUSER FINISH
PROJECT NAME: TYPE: Glowring PENDANT FEATURES SEAMLESS ONE PIECE MOLDED DIFFUSER FULLY ENCLOSED TOP SURFACE TO MINIMIZE ACCUMULATION OF DUST AND DEBRIS MINIMAL CROSS SECTION SIZE AVAILABLE WITH METAL TRIM
LED STEP LIGHT LED Forms
LED STEP LIGHT LED Forms OUTDOOR INDOOR Inspiration will come in abundance once you try our LED accent step lights. Use them outdoors on your deck or on the stairs inside of your home. You will be truly
PROJECT INFORMATION PROJECT
SURFACE PROJECT INFORMATION PROJECT SURFACE DATE TYPE NanoLED Cylinder - Available in 2 wattage/lumen packages with maximum delivered lumens of over 1100 at 20W (57LPW). The NanoLED cylinder provides maximum
Cubic SurroundLite TM
Project Type Notes Spotless lens VL Optic Louver PERFORMANCE PER LINEAR FOOT AT 35K (VL) SO - Spotless lens NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 75up/25down at 8 lm/ft 6 lm/ft