Assembly instructions. Control System SS5. The noble art of digging. Version 1.0

Transcription

1 Assembly instructions Control System SS5 The noble art of digging Version 1.0

2

3 Table of contents Safety instructions General information...4 Cautions...4 Symbols...6 Control 1. Checklist, electronics...7 1b. Checklist, hydraulics Checking the type plate on unit...9 Control system installation (line installation) 3. Picture diagram, machine Line installation and mounting, stick and unit Hydraulic coupling, components Checking the hydraulic pressure Mounting of electrical connection, stick Line installation and mounting, stick Line installation and mounting, boom Line installation and mounting, boom Boomroot Line installation, cab Line installation, cab Installation, push buttons Protecting the line, push buttons Connection of line in control box Function testing 17. Function testing Sida 3

4 Safety instructions Safety instructions General information These assembly instructions provide detailed information on installation, assembly, handling and maintenance relevant to control system 5. The safety information in these instructions relates directly to control system 5 and does not regard the base machine. In addition to these assembly instructions, you should carefully read the safety information regarding the relevant base machine and any other equipment you will be using.. Do not attempt to install, use or perform maintenance on the tiltrotator/rotator and its enclosed equipment before carefully reading all the information regarding the tiltrotator/rotator, its related equipment and the base machine. OBS! There are further safety instructions in the instruction manual for the rotator. Identification and marking of the tiltrotator/rotator Check that the information in Certification of conformity corresponds to the information on the machine (see point 2, Checking the type plate ), the equipment and the documentation. In the event of non-conformities, contact your supplier before first assembly. Carefully read all warning texts before assembling or using the tiltrotator/ rotator and its accompanying equipment. The warning texts explain potential risks and how to avoid them. If in any doubt, contact your employer or supplier. Remember that sound judgment and thorough knowledge of your machinery reduces many unnecessary risks. Consequently, operators should take the time to learn safe use of the tiltrotator/rotator and its related equipment before starting operation. Cautions Faulty installation can be dangerous. If in any doubt, contact your dealer or engcon Nordic AB. Ensure that the hydraulic system is decompressed before starting work on the system. Risk of personal injury. NB: Observe the maximum input pressure and maximum input flow. This applies to all control systems. See technical data. Switch off the power when working with the electrical system and remove rings, watches etc. before starting work. Risk of personal injury. Sida 4

5 Safety instructions Never use your hands to check for leaks in the hydraulic system. Hydraulic oil under pressure can penetrate the skin causing serious injury. Implements connected to the tiltrotator/ rotator may not be used unless correctly locked into place. ALWAYS make sure that the lock bolts protrude according to the specifications for the relevant quick hitch. Take care if using a ladder to install parts. Risk of personal injury. Never attempt to increase the equipment s maximum capacity by making modifications without the Short circuits in electrical cables can cause injury and burning. Insulate electrical conductors and parts carefully when installing electrical equipment. Risk of burn injuries from hot hydraulic oil. The machine must never be operated with the implement lock switch turned on, except when attaching or detaching a bucket or implement. If in any doubt regarding the machinery or the safety features, contact an engcon dealer or engcon Nordic AB. Risk of catching in moving parts. Risk of personal injury. Sida 5

6 Safety instructions Symbols Implement lock switch not activated. Implement lock switch activated. The sticker below shows the functions for the general push buttons installed on the existing control levers. NB: Not available for all machines. Left control lever Rotation clockwise Rotation anticlockwise Optional grabber open (extra) Extra function Right control lever Tilt Tilt Optional grabber closed (extra) Extra function The above choice of button functions is only a recommendation. Variations may occur depending on how the user has chosen to position the functions. Sida 6

7 Control Control 1. Checklist, electronics No. Article Designation Quantity 1 Alt Electrical box ss5 1 Alt Electrical box ss Implement lock switch Machine cable ss5 16 m Fastening plate ILME connector Switch ss5 right (4-button) Switch ss5 left (4-button) 1 7 Connection cables 8 Assembly material Sida 7

8 Control 1b. Checklist, hydraulics No. Article Designation Quantity Hydraulic hose with 2 couplings 3/8 free end Hydraulic hose with 2 couplings 1/2 free end 2 Machine-specific Tredo washer 2 3 Machine-specific Adapter Tredo washer Hydraulic coupling Hydraulic coupling Dust guard Dust guard 2 EC02-EC15 = Hydraulic hose 3/8 EC20-EC30 = Hydraulic hose 1/2 Sida 8

9 2. Checking the type plate on unit Control Control system installation (line installation) 3. Picture diagram, machine Sida 9

10 Control system installation (line installation) Control system installation (line installation) 4. Line installation and mounting, stick and unit 1. Cut the free end of the hydraulic hose to the correct length. Press measurements: = 20.0 mm, = 23.4 mm Sida 10

11 5. Hydraulic coupling, components Pos Article No. 1 Tredo washer* 2 Adapter* * Machine-specific Control system installation (line installation) Sida 11

12 Control system installation (line installation) 6. Checking the hydraulic pressure The pressure may only be adjusted by an authorised workshop according to the specifications. Max. supply pressure: 22.5 MPa, 225 Bar, 3263 PSI Max. return pressure: 2.5 MPa, 25 Bar, 363 PSI Sida 12

13 Control system installation (line installation) 7. Mounting of electrical connection, stick Pos Article no piece piece pieces pieces Sida 13

14 Control system installation (line installation) 8. Line installation and mounting, stick 9. Line installation and mounting, boom Sida 14

15 Control system installation (line installation) 10. Line installation and mounting, boom 11. Boomroot Sida 15

16 Control system installation (line installation) 12. Line installation, cab Yellow = Machine cable Green = Implement lock switch Blue = Push buttons Sida 16

17 13. Line installation, cab Assembly instructions Control System SS5 Control system installation (line installation) Pos Article no Fuse 10A NB: Pos. 5 should be positioned so that the bucket lock cannot be accessed unintentionally. Sida 17

18 Control system installation (line installation) 14. Installation, push buttons 15. Protecting the line, push buttons 1 Cable tie. Sida 18

19 Control system installation (line installation) Function testing 16. Connection of line in control box For information on connection, see relevant wiring diagram. Function testing 17. Function testing NB: There are two types of electrical box. The picture shows electrical box Set the mains switch to ON. Check that the green LED (1) is illuminated. This indicates that one of the output lines is active. LED (2) indicates that the lock piston for the bucket is activated. Electrical box : Press all the function buttons one at a time. Electrical box : Press the button (4) on the panel of the electrical box. Check that all the LEDs (3) are flashing red. If any of the LEDs (3) is constant red, the function is not correct. Check the connections. Electrical box : If LED (5) is illuminated, the fuse in the electrical box has tripped. Open the lid of the electrical box and change the fuse. Electrical box : If LED (7) is illuminated, the automatic fuse has tripped. Reset it by pressing the reset button (6) on the panel of the electrical box. Sida 19

20 Production: Syre Print: Berndtssons Tryckeri, 2010 engcon Nordic engcon UK engcon Germany engcon Finland engcon Denmark engcon Poland engcon Sweden/Nordic/Holding, PO Box 111, SE Strömsund, Sweden