Step-Up AIC1628 AIC1634 AIC1638 AIC1639 AIC1642 AIC1647 AIC1880 AIC1896 AIC3402 AIC3411 AIC3412 AIC3413 AIC3415

Size: px
Start display at page:

Download "Step-Up AIC1628 AIC1634 AIC1638 AIC1639 AIC1642 AIC1647 AIC1880 AIC1896 AIC3402 AIC3411 AIC3412 AIC3413 AIC3415"

Transcription

1 2017.2

2 Quick Reference - Power Conversion INDEX DC/DC Converter for Portable Application p4 Quick Reference Quick Reference - Power Conversion P.1 Quick Reference - Power Manipulation P.2 AIC1628 AIC1634 AIC1638 AIC1639 AIC1642 AIC1647 AIC1880 Step-Up AIC1896 AIC3402 AIC3411 AIC3412 AIC3413 AIC3415 AIC3417 AIC3418 AIC3420 AIC3632 AIC3634 AIC3643 AIC2140 AIC2253 AIC2256 AIC2258 AIC2259 AIC2262 AIC2304 LV Step-Down AIC2309 AIC2321 AIC2322 AIC2323 AIC2324 AIC2354 AIC2359 AIC2362 AIC2363 AIC2364 AIC2367 AIC2369 AIC2385 usip Power Module AIC2456 Inverting AIC1650 AIC1652 AIC1653 Quick Reference - Power Selection Table P.3 DC/DC Converter for High Power Application p6 HV Step-Down Buck-Boost Portable Power Application High Power Application P.4 P.6 AIC1563 AIC1573 AIC1576 AIC1578 AIC2565 AIC2566 AIC2573 AIC2802 AIC2822 AIC2823 AIC2832 AIC2833 AIC2842 AIC2852 AIC2857F AIC2858F AIC2862 AIC2863 AIC2864 AIC2865 AIC2873 AIC2880 AIC2893 AIC2341 White-LED Drivers P.6 P.8 White-LED Drivers p6 Supervisory P.8 Charge-Pump LED Backlight Miscellaneous P.8 AIC1660 AIC1841 AIC1842 AIC1848 AIC7660 AIC1634 AIC1647 AIC1648 AIC1896 AIC3643 Linear Regulators & Reference P.9 Note: Information provided by AIC is believed to be accurate and reliable. However, we cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in an AIC product; nor for any infringement of patents or other rights of third parties that may result from its use. We reserve the right to change the circuitry and specifications without notice. Life Support Policy: AIC does not authorize any AIC product for use in life support devices and / or systems. Life support devices or systems are devices or systems which, (i) are intended for surgical implant into the body or (ii) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. Analog Integrations Corporation 1

3 Quick Reference - Power Manipulation Quick Reference - Power Selection Table p8 Buck Converters 1.5A 2A 3A 5A USB AIC6151 AIC6152 AIC6156 AIC6161 AIC6162 AIC6163 AIC1784 AIC6164 AIC6170 AIC6176 AIC6178 AIC6186 AIC6188 Regulatory USB Supervisory AIC809 AIC810 AIC811 AIC6166 AIC6168 AIC1790 AIC6511 AIC812 AIC1680 Miscellaneous Bare-Bone USB Switch AIC6191 AIC6193 AIC6196 AIC6198 NiMH/NiCd Charger Li-ion Charger High Driver Linear Regulator/ Reference p8 p8 LB1268 p9 HV Buck LV Buck VIN up to 36V VIN up to 23V VIN up to 16V VIN up to 6V Boost Converters Switch Limit Boost Buck- Boost VOUT up to 30V VOUT up to 24V VOUT up to 11V VOUT up to 5.5V VOUT up to 6V AIC2140 AOT AIC2253 AOT AIC2256 AOT AIC2258 AOT AIC2259 AOT AIC2385 AIC2354 AIC2359(Dual) AIC2822 AIC2857F AIC2862 AIC2832 AIC2842 AIC2852 AIC2880 Ultra Low Iq 0.6μA AIC2262 AOT AIC2321/22 AIC2362 AIC2893 AIC2823 AIC2858F AIC2863 AIC2833 AIC2873 AIC2323 AIC2363 AIC2369 AOT AOT AIC2864(4A) AIC2865(5A) AIC2324(4A) AIC2364(4A) AIC2367(5A) 1A 2A 3A 5A AIC1634 AIC1647 AIC1896 AIC3643 AIC3632 AIC3634 AIC1642 AIC3402 Low Iq 3uA AIC3411/12 AIC3413 AIC1880 AIC3415 AIC2341 AIC3417 COT COT AIC3418 AIC3420(6.5A) Low Dropout AIC1084 AIC1085 AIC1086 AIC1117 AIC1117A Ultra Low Dropout AIC1190 AIC1221 AIC1701 AIC1702 AIC1722A AIC1731 AIC1733 AIC1734 AIC1735 AIC1742 AIC1746 AIC1747 AIC1748 AIC1952 AIC1953 DDR AIC1385 AIC1386 AIC1387 AIC1388 Reference AIC431 TL431A TL431 Limit USB Regulatory USB Bare-Bone 1A 2A 3A 1A 1A 2A Single Channel AIC6151(Io Adj.) AIC6161 AIC6152(Io Adj.) AIC6162(1.4A) AIC6163 AIC6170(Io Adj.) AIC6156 Fast SCP 1.3uS, Curr. ±7~15% AIC6164(3.2A) AIC6166 AIC6168 AIC6191 AIC6193 Fast SCP 4uS Dual Channel AIC6186 AIC6176(1.25A) AIC6178 AIC6188(1.55A) AIC6196 AIC Analog Integrations Corporation 3

4 Portable Power Application Function (A) Control Mode External (V) (V) Internal Switch A:AOT, C:COT, F:PFM, Switch IQ S:PSM, W:PWM min. max. I SW Limit I OUT Step Up Series AIC V IN ~ 4.5x V IN 0.3 (BJT) 100μA S-F AIC V IN ~ 30V μA W AIC /3.0/3.3/4.5/ ~ μA F AIC / (BJT) 18μA F AIC /2.2/2.7/2.8/3.0/3.1/3.3/3.7/4.5/ μA F AIC V IN ~ 30V 70μA W AIC V IN ~ 11V μA W AIC V IN ~ 30V 100μA W AIC /2.2/2.7/2.8/3.0/3.3/ μA S-W AIC ~ 5.5V 0.4 7μA S-C AIC ~ 5.5V μA S-C AIC ~ 5.25V μA S-W AIC ~ 5.25V μA S-W AIC ~ 5.5V μA S-C AIC ~ 5.5V μA S-C AIC ~ 5.5V μA S-C AIC V IN ~ 24V μA F AIC V IN ~ 24V μA F AIC V IN ~ 22V μA W LV Step Down Series AIC V ~ μA A AIC V ~ V IN μA A AIC V ~ V IN μA A AIC V ~ V IN μA A AIC V ~ V IN μA A AIC V ~ VIN μA A AIC V ~ V IN μA W AIC V ~ V IN /1.0 65μA W AIC V ~ V IN W AIC V ~ V IN μA W AIC V ~ V IN μA W AIC V ~ V IN μA W AIC V ~ V IN μA S-W AIC V ~ V IN /1.0 65μA W AIC V ~ V IN μA W AIC V ~ V IN μA S-W AIC V ~ V IN μA S-W AIC V ~ V IN μA F-W AIC V ~ V IN F-W AIC V ~ V IN μA S-W usip Power Module Series AIC V ~ V IN μA A Inverting Series AIC V ~ -40V (BJT) 100μA F AIC V ~ -40V (BJT) 80μA F AIC V ~ -28V μA F Freq. (KHZ) Description High-Efficiency, Step-Up PFM-PSM DC/DC Controller MHz -Mode Step-Up PWM DC/DC Converter SOT Cell, 3-Pin, Step-Up PFM DC/DC Converter SOT Cell, 3-Pin, Step-Up PFM DC/DC Controller SOT Pin One-Cell Step-Up PFM DC/DC Converter,, SOT89-3, TO White LED Step-Up PWM Converter Low Noise, Step-Up PWM DC/DC Converter M MHz SOT23-6 -Mode Step-Up PWM DC/DC Converter SOT Synchnorous Step-Up DC/DC Converter SC70-3, SC70-5,, - SC70-6 Low IQ High Light Load Efficiency Synchronous Boost Converter SC Low No-Load Input Synchronous Constant Off Time/PSM Step-Up Converter SOT mA, 1.2MHz Synchronous Step-Up Converter SOT mA, 1.2MHz Synchronous Step-Up Converter SOT A Synchronous Step-Up Converter DFN-10 (3x3), E - 1.5A Synchronous Step-Up Converter DFN-10 (3x3), E - 2.1A Synchronous Step-Up Converter DFN-10 (3x3), E - 2.1A Synchronous Step-Up Converter SOT PFM Mode Step-Up DC/DC Converter With True Shutdown SOT Built-in OVP White LED Step-Up Converter SOT23-6, TSOT mA Ultra Low Iq Step-Down DC/DC Converter with AOT Control DFN-12 (2.4x2.4) A, 1.5MHz AOT Synchronous Step-Down DC/DC Converter TSOT A, 3MHz AOT Synchronous Step-Down DC/DC Converter TSOT A, 1.5MHz AOT Synchronous Step-Down DC/DC Converter TSOT A, 1.5MHz AOT Synchronous Step-Down DC/DC Converter TSOT A, 1.5MHz AOT Synchronous Step-Down DC/DC Converter TSOT23-8, DFN-8 (2x1.5) A Synchronous PWM Step-Down DC/DC Converter DFN-6 (2x2), A Dual Synchronous PWM Step-Down DC/DC Converter DFN-12 (3x3) A 1.2MHz Synchronous PWM Step-Down Converter DFN-10 (3x3) 550/1100 2A 550k/1.1MHz Synchronous PWM Step-Down Converter 550/ A 550k/1.1MHz Synchronous PWM Step-Down Converter E 550/1200 4A 550k/1.2MHz Synchronous PWM Step-Down Converter DFN-12 (3x3), E A Synchronous PWM-PSM Step-Down DC/DC Converter DFN-6 (2x2), A Dual Synchronous PWM-PSM Step-Down DC-DC Converter DFN-12 (3x3) 550/1100 2A 550k/1.1MHz Synchronous Step-Down Converter with High Light-Load Efficiency, E 550/ A 550k/1.1MHz Synchronous Step-Down Converter with High Light-Load Efficiency DFN-10 (3x3), E 550/ A 550k/1.2MHz Synchronous Step-Down Converter with High Light-Load Efficiency DFN-12 (3x3), E A 1MHz Synchronous PWM/PFM Step-Down Converter with Light Load Efficiency E A 1MHz Synchronous PWM-PFM Step-Down Converter with High Light Load Efficiency DFN-10 (3x3), E A Synchronous PWM/PSM Step-Down DC/DC Converter A, 3MHz AOT Synchronous Step-Down Converter Module with Integrated Inductor DFN-10 (2.5x3) High-Efficiency, Inverting PFM DC/DC Controller Micro-Power Inverting PFM DC/DC Controller - Micropower Inverting PFM DC/DC Converter in Glossary: (1) VREF could be the minimum VOUT. In the application, VOUT depends on the designed external resistors. Please check with datasheets for more information. (2) Internal Switch I OUT : built-in switch output current. I SW Limit: Internal switching current limit Maximum I OUT can never exceed I SW limit. Max. IOUT=(Efficiency) (VIN/VOUT) ISW (3) External Switch I OUT : Possible external power switch I OUT. The external device driving capacity may change the I OUT value, possibly greater than the max. I OUT, shown in the table above. The real I OUT depend on the external device's driving capability. (BJT : β ; MOS : Gm) Example: If customers request -> VIN=1.5V(Alkaline Battery) and minimum VIN=1.1V; VOUT=3.3V(IOUT=250mA); Low battery detective is needed. High efficiency (>90%) is needed. Solution: Choose AIC1610 for the solution 4 Analog Integrations Corporation 5

5 High Power Application & Universal Application Function (A) (V) Internal Switch External Switch (V) min. max. I SW Limit HV Step Down Series AIC V ~ V IN mA AIC V ~ V IN mA AIC V ~ V IN 5 90μA AIC V ~ V IN 5 90μA AIC V ~ 16V μA AIC V ~ 16V μA AIC V ~ V IN 10 2mA AIC V ~ 12V mA AIC V ~ 12V μA AIC V ~ 12V μA AIC V ~ 10V mA AIC V ~ 10V mA AIC V ~ 10V mA AIC V ~ 10V mA AIC2857F V ~ 12V mA AIC2858F V ~ 12V mA AIC V ~ 12V μA AIC V ~ 12V μA AIC V ~ 6V mA AIC V ~ 6V mA AIC V~5.5V uA AIC V ~ 10V mA AIC V ~ 6V mA Buck-Boost Series AIC V ~ 5.5V μA Charge Pump Series AIC (-V IN ), 0.5V IN, 2.0V IN μA AIC V (up to 4 WLEDs) mA AIC V (up to 6 WLEDs) mA AIC mA AIC (-V IN ), 0.5V IN, 2.0V IN μA LED Backlight AIC V IN ~ 30V μA AIC V IN ~ 30V 70μA AIC V IN ~ 30V 70μA AIC V IN ~ 30V 100μA AIC V IN ~ 22V 1 150μA I OUT IQ Control Mode A:AOT, F:PFM, S:PSM, W:PWM, C:COT Freq. (KHZ) Description S 0.1~100 Versatile DC/DC Converter DIP-8,, E S 0.1~ A Step-down DC/DC Converter E S-F 90~280 High-Efficiency, Step-Down DC/DC Controller S-F 90~280 High-Efficiency, Step-Down DC/DC Controller DIP-8, W 385 3A, 23V Step Down DC/DC Converter E W 385 3A, 23V Step Down DC/DC Converter E W 300 Synchronous Buck DC-DC Controller MSOP-10 W 340 3A, 23V Synchronous Step-Down Converter with LDO Controller E W 550 2A, 23V Synchronous Step-Down Converter E W 340/550 3A, 23V Synchronous Step-Down Converter E S-W 490 2A 16V 490KMHz PWM/PSM Synchronous Step-Down Converter SOT23-6 S-W 490 3A 16V 490KHz PWM/PSM Synchronous Step-Down Converter SOT23-6 S-W A 16V 1.2MHz PWM/PSM Synchronous Step-Down Converter SOT23-6 S-W 500/700 2A 16V 500kHz/700kHz PWM/PSM Synchronous Step-Down Converter SOT23-6 W 340 2A, 23V Synchronous Step-Down Converter, E W 340 3A, 23V Synchronous Step-Down Converter E S-W 340/550 2A, 23V Synchronous Step-Down Converter with High Light-Load Efficiency E S-W 340 3A, 23V Synchronous Step-Down Converter with High Light-Load Efficiency E C 700 4A 16V 700kHz Synchronous Step-Down Converter E C 700 5A 16V 700kHz Synchronous Step-Down Converter E A A 17V Synchronous Step-Down Converter with AOT Control QFN-16 (3x3) S-W 500/700 2A 16V 500kHz/700kHz PWM/PSM Synchronous Step-Down Converter with PG E A 650 3A 36V 650kHz Synchronous Step-Down Converter E S-W MHz Synchronous Buck-Boost DC/DC Converter DFN-10 (3x3) 10/50 Switched-Capacitor Converter DIP8, W 1000 High Efficiency 1.5x PWM Charge Pump For 4 White LEDs Backlighting QFN-12 (3x3), QFN-12 (4x4) W 1000 High Efficiency 1.5x PWM Charge Pump For 6 White LEDs Backlighting QFN-16 (3x3), QFN-16 (4x4) W 1800 Regulated 5V PWM Charge Pump In SOT-23 For White LEDs Backlighting SOT /50 Switched-Capacitor Converter DIP-8, W MHz -Mode Step-Up PWM DC/DC Converter SOT23-6 W 1200 White LED Step-Up PWM Converter W 1200 Built-in OVP White LED Step-Up Converter SOT23-6, TSOT23-6 W MHz SOT23-6 -Mode Step-Up PWM DC/DC Converter SOT23-6 W 1200 Built-in OVP White LED Step-Up Converter SOT23-6, TSOT Analog Integrations Corporation 7

6 Power Manipulation Series Linear Regulators & Reference Rds-on (mω) No. of Channel Short-Circuit Protection Response Time Limit (A) (A) (%) USB AIC μs 0.5 ~ ±15 AIC μs 0.5 ~ ±15 AIC μs 0.5 ~ ±15 AIC ~ ±25 AIC ~ ±25 AIC ~ 2 1 ±25 AIC ~ ±25 AIC ~ 2 2 ±7 ~ 12 AIC ~ ±30 AIC ~ 2 1 ±30 AIC ~ ±20 AIC ~ ±20 Regulatory USB AIC / /1 ±20 AIC μs 0.72/ /1 ±18 Bare-Bone USB Switch AIC ~ AIC ~ AIC ~ AIC ~ (V) max. (μa) Detecting Detector Threshold Hysteresis Supervisory AIC ~ 6 3 ±1.5% AIC ~ 6 3 ±1.5% AIC ~ 6 3 ±1.5% AIC ~ 6 3 ±1.5% AIC ~ ±2.5% 0.05 VDET Charging Set NiMH- NiCd Battery Charger -ΔV ΔT-Δt Safety Timer Max. Max. Temp. AIC1784 Single Yes 1 mode (6%) Yes Yes Yes Yes DIP-8, Input Volt. Range (V) Charge Range (ma) 0ΔV Time (of Safety Timer) Charge Termination Reset Active Timeout Period (ms) 0.2 Battery Recharge Safety Timer Battery Temp. Protection E E SOT23-6 SOT23-6 E, SOT23-6 SOT23-6 SOT143-4, SOT143-4,,, TO92-3 Input Low Dropout Linear Regulator (V) AIC /2.5/3.3/adj. 5A ±1% TO220-3, TO252-3, TO263-3 AIC /2.5/3.3/adj. 3A ±1% TO220-3, TO252-3, TO263-3 AIC /2.5/3.3/adj. 1.5A ±1% SOT223-3, TO220-3, TO252-3, TO263-3 AIC /2.5/3.3/adj. 800mA ±1% SOT223-3, TO220-3, TO252-3, TO263-3 AIC1117A 7 1.8/2.5/3.3/adj. 1A ±1% TO252-3, TO263-3, TO252-3, SOT263-3 Ultra Low Dropout Linear Regulator AIC ~ 5.0V, in step of 0.1V 1A ±2% E, SOT223-3, TO252-3, TO252-4, TO252-5, TO263-3, TO263-5 AIC ~ 5.5V, in step of 0.1V 2A ±2% E, SOT223-3, TO252-3, TO252-5 AIC ~ 5.0V, in step of 0.1V 150mA ±2% DFN-6 (2x2),, AIC ~ 5.0V, in step of 0.1V 350mA ±2% DFN-6 (2x2),,, SOT89-3 AIC1722A 8 1.5/1.8/2.0/2.5/2.7/3.0/3.3/3.5/3.7/3.8/ mA ±2%, SOT89-3, TO92-3 AIC /1.8/2.5/2.8/3.0/ mA ±2%, SOT89-5 AIC /1.5/1.8/2.5/ mA ±2%, SOT89-5 AIC /2.0/2.5/2.7/3.0/3.3/3.5/3.7/3.8/ mA ±2%, SOT89-3, TO92-3 AIC /2.5/3.3/3.5/3.8/ mA ±2% SOT223-3,, SOT89-3, TO252-3 AIC / mA ±2% AIC ~ 4.2V, in step of 0.1V 150mA ±2% DFN-6 (2x2),, AIC ~ 4.2V, in step of 0.1V 300mA ±2% DFN-6 (2x2), SC70-3, SC70-5,,, SOT89-3, SOT89-5 AIC ~ 4.5V, in step of 0.1V 600mA ±2%,, SOT89, SOT223-3, TO252 AIC Dual: 0.8 ~ 3.8V, in step of 0.1V 300mA/300mA ±2% DFN-6 (2x2), SOT23-6 AIC Dual: 0.8 ~ 3.8V, in step of 0.1V 600mA/600mA ±2% E Input DDR Regulator (V) Load Regulation AIC adj. 2A ±20mV E AIC adj. 2A ±20mV E AIC adj. 3A ±20mV, E AIC adj. 3A ±20mV E Li-ion Charger AIC ~ ~ /10 Full Charge Yes Yes Yes AIC ~ /10 Full Charge Yes Yes Yes DFN-10 (3x3), MSOP-10E TSSOP-16E Cathode Reference (V) Sink Reference max. (V) High Driver Input Channel No. LB (ma) 1000 DIP-8, Reference AIC μA ~ 200mA ±0.5%,, SOT89-3, TO92-3 TL431A μA ~ 200mA ±1.0%,, SOT89-3, TO92-3 TL μA ~ 200mA ±1.6%,, SOT89-3, TO Analog Integrations Corporation 9

7 COMPANY PROFILE Overview Based in Hsinchu Science Park of northern Taiwan, AIC was founded in Jan 1992 and is an IC fabless company exclusively devoted to designing, testing and marketing power management integrated circuits. By leveraging AIC s extensive product portfolio and quick responses to customized requests, we quickly emerged as a leading IC solution provider of power management in the Pacific Rim to help customers meet the demanding challenges of the dynamic market. AIC has a long-standing reputation for offering solutions with products of best-in-class quality and reliability performance. In addition to the compliance to ISO9001 and ISO14001 standards, AIC has been certified by many global tier one customers in light of our robust quality management system and outstanding product quality, as illustrated in below achievements Average Outgoing Quality Visual Mechanical 60 PPM Final Electrical PPM Customer Certification List Customer Nintendo Ricoh LGE Samsung Canon SONY Customer Certification Green Procurement Certificate Certificate of Approval of Production Audit Green Program Certificate Eco-Partner Certificate Green Activity Certificate SONY Green Partner Certificate Year Sales Channel AIC HEADQUARTERS Si-Soft Research Center, 1A1, 1 Lihsin 1st Rd., Science Park, Hsinchu 300, Taiwan. TEL: TEL: sales@analog.com.tw AIC TAIPEI 5F, 368 Xinhu 1st Rd., Nei-hu Dist., Taipei 114, Taiwan TEL: FAX: sales@analog.com.tw AIC JAPAN (Tokyo) 3F, Otomi Bldg , Asakusabashi, Taito-ku Tokyo, , Japan TEL: hiroshi_kondo@analog.com.tw AIC CHINA (Shenzhen) Room 610, Building 212, Tairan Industrial & Trade Park, Tairan 9th Rd., Futian District,Shenzhen, China TEL: FAX: sales@aicchina.com.cn AIC INTERNATIONAL TEL: ext international@analog.com.tw

REGULATORS SYNCHRONOUS STEP DOWN (BUCK) Feedback Voltage (V) Switching Freq (khz) MP Internal Internal Comp

REGULATORS SYNCHRONOUS STEP DOWN (BUCK) Feedback Voltage (V) Switching Freq (khz) MP Internal Internal Comp REGULATORS SYNCHRONOUS STEP DOWN (BUCK) Current Voltage Freq Soft Start Ext Sync Maximum Operating Input Voltage 1.1V Vin 6V MP2104 2.5 6.0 0.6 1.0 0.4 0.6 1700 Internal Internal Comp MP28114 2.5 6.0 0.6

More information

Designing Applications with Lithium-Ion Batteries

Designing Applications with Lithium-Ion Batteries Application Note Roland van Roy AN025 Sep 2014 Designing Applications with Lithium-Ion Batteries Contents 1. Introduction...1 2. Single Li-Ion Cell as Power Source...2 3. Battery Charging...6 4. Battery

More information

Automotive & Industrial

Automotive & Industrial MPS - Simple, Easy Solutions Automotive & Industrial Power Management Solutions www.monolithicpower.com Quality Assurance and Reliability Commitment The MPS Quality Assurance organization develops, coordinates,

More information

Mobile Communications Product Guide

Mobile Communications Product Guide Mobile Communications Product Guide Part Number Description Package(s) Available (Lead-free) Page No. LED Backlight Controller ICs for Small-Size LCD Panels OZ521 Boost Converter Controller 8 E-SOP, SOP

More information

ACE4108 Max.2A Li-ion Switching Charger IC

ACE4108 Max.2A Li-ion Switching Charger IC Description The ACE4108 is a 2A Li-Ion battery switching charger intended for 12V. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the

More information

Li-ion/Li Polymer Battery Charger. Features

Li-ion/Li Polymer Battery Charger. Features General Description The is a highly-integrated battery charger for single-cell Li-ion or Li-polymer batteries capable of operating with an input voltage reached 2.5V. It is a complete charger device designed

More information

3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor

3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor 3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor DESCRIPTION ETA9740 is a switching Li-Ion battery charger capable of delivering up to 3A of charging current to the battery

More information

Delphi D12S Non-Isolated Point of Load

Delphi D12S Non-Isolated Point of Load FEATURES High Efficiency: 93.4% @ 12Vin, V/A out Size: 3.x1.x12.mm (1. x.61 x.46 ) Wide input range: 4.V~13.2V Output voltage programmable from.9vdc to.vdc via external resistors No minimum load required

More information

IP5209. Fully-integrated power bank System-On-Chip with 2.1A charger, 2.4A boost converter and DCP support. 1 Features. 2 Applications.

IP5209. Fully-integrated power bank System-On-Chip with 2.1A charger, 2.4A boost converter and DCP support. 1 Features. 2 Applications. Fully-integrated power bank System-On-Chip with 2.1A charger, 2.4A boost converter and DCP support 1 Features Synchronous switching charger and synchronous boost converter 2.1A synchronous switching charger,

More information

MP V, 1A, Li-lon, Linear Battery Charger with 10mA High Voltage LDO

MP V, 1A, Li-lon, Linear Battery Charger with 10mA High Voltage LDO The Future of Analog IC Technology DESCRIPTION The MP2631 is a linear, high performance single cell Li-Ion or Li-Polymer battery charger with 1mA LDO. By integrating high voltage input protection into

More information

ACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief

ACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief 0 200 400 600 800 1000 1400 1200 5.5 FEATURES Dedicated Single Chip Solution for Mobile Power With Minimal Component Count 5V/1.5A Constant Output Current in Boost Mode 1.5A Switching Charger Programmable

More information

Nuances in Ultra-Low Power Designs for Wearable Products. Steven Schnier and Chris Glaser March 2016

Nuances in Ultra-Low Power Designs for Wearable Products. Steven Schnier and Chris Glaser March 2016 Nuances in Ultra-Low Power Designs for Wearable Products Steven Schnier and Chris Glaser March 2016 1 Why is Low Power Needed? Wearables consist of many functions Small Battery with Charger Li-Ion Battery

More information

Power Management Solutions for Automotive

Power Management Solutions for Automotive November 2016 Power Management Solutions for Automotive IN THIS ISSUE XD9260/61 1.5A, Hi-SAT COT Synchronous Step-Down DC/DC Converter XD9267/68 36V 0.6A Synchronous Step-Down DC/DC Converter XD6216 28V

More information

Buck-Boost Converter Achieving up to 97% Efficiency at 12V/5A from 4-32V Input. Linear Technology Corporation

Buck-Boost Converter Achieving up to 97% Efficiency at 12V/5A from 4-32V Input. Linear Technology Corporation Buck-Boost Converter Achieving up to 97% Efficiency at 12V/5A from 4-32V Input Linear Technology Corporation 1 Where are the Vin, min

More information

ST3S01PHD BATTERY CHARGE I.C.

ST3S01PHD BATTERY CHARGE I.C. BATTERY CHARGE I.C. DEDICATED I.C. FOR 1 LI-ION CELL OR 3 NI-MH CELLS 5 DIFFERENT OPERATING MODES 150 ma PRECHARGE CURRENT VERY LOW DROP CHARGE SWITCH (130mV @ 800mA) VERY LOW DROP REVERSE SWITCH (130mV

More information

Power Management Solutions

Power Management Solutions Spring/Summer 2014 Power Management Solutions MICRO DC/DC WITH INTEGRATED COIL IN THIS ISSUE 1.5A, 5.5V CONSTANT ON TIME ONLY 2.5 x 3.2 x 1.0mm XC8107/08/09 85m High Function Power Switch XC9270/71 30V,

More information

Reach Beyond Traditional Powering Scenarios with New Ultralow I Q Buck-Boost Converters

Reach Beyond Traditional Powering Scenarios with New Ultralow I Q Buck-Boost Converters Reach Beyond Traditional Powering Scenarios with New Ultralow I Q Buck-Boost Converters John Bazinet Staff Scientist Power Products David Loconto Design Center Manager Power Products Steve Knoth Senior

More information

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1061A LINEAR LI-ION BATTERY CHARGER WITH DUAL SYNCHRONOUS BUCK REGULATOR

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1061A LINEAR LI-ION BATTERY CHARGER WITH DUAL SYNCHRONOUS BUCK REGULATOR Demonstration circuit 1061A is a complete single cell Lithium-Ion battery charger and two synchronous buck voltage regulators with adjustable output voltages. Operating at a frequency of 2.25MHz, the regulators

More information

ChipLead Technology VAS A USB/Adapter Switching Charger. Features. General Description. Applications

ChipLead Technology VAS A USB/Adapter Switching Charger. Features. General Description. Applications 2.5A USB/Adapter Switching Charger General Description The is a highly-integrated switch-mode battery charge management device for 1 cell Li-Ion and Li-polymer batteries in a wide range of tablet and other

More information

2.5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP SYS 2.2K STAT. 2A Switching Charger with Minimum Component Count

2.5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP SYS 2.2K STAT. 2A Switching Charger with Minimum Component Count .5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP DESCRIPTION ETA6 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected,

More information

Power supply for remote sensors

Power supply for remote sensors Power supply for remote sensors Design considerations for electronic sensors with independent energy sources and low dropout (LDO) voltage regulators Markus Ulsaß, attraktor Hamburg, 5.8.2013 Follow me

More information

300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator

300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator 2 GND Preliminary Datasheet 300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator General Description The is designed for portable RF and wireless applications with demanding performance and

More information

XA4202. The XA4202 is available in the 8-lead SO Package. Charging Docks Handheld Instruments Portable Computers.

XA4202. The XA4202 is available in the 8-lead SO Package. Charging Docks Handheld Instruments Portable Computers. Standalone Li-Lon Switch Mode Battery Charger Features Input Supply Range: 4.7V-6V High Efficiency Current Mode PWM Controller End - Charge - Current Detection Output Constant Switching Frequency for Minimum

More information

Selector Guide Summer/Fall 2017

Selector Guide Summer/Fall 2017 Powering a Greener Future Selector Guide Summer/Fall 2017 www.aosmd.com www.aosmd.com Powering a Greener Future Diverse customer base Telecom Consumer Black Goods White Goods PC Industrial Alcatel-Lucent

More information

LM3621 Single Cell Lithium-Ion Battery Charger Controller

LM3621 Single Cell Lithium-Ion Battery Charger Controller Single Cell Lithium-Ion Battery Charger Controller General Description The is a full function constant voltage, constant current (CVCC) lithium-ion (Li+) battery charger controller. It provides 1% regulation

More information

COTAG GENERAL DESCRIPTION

COTAG GENERAL DESCRIPTION GENERAL DESCRIPTION The YF8036 is a highly integrated Li-ion battery linear charging management device targeted at space limited portable applications. The YF8036 offers an integrated MOSFET and current

More information

LM3352 Regulated 200 ma Buck-Boost Switched Capacitor DC/DC Converter

LM3352 Regulated 200 ma Buck-Boost Switched Capacitor DC/DC Converter Regulated 200 ma Buck-Boost Switched Capacitor DC/DC Converter General Description The LM3352 is a CMOS switched capacitor DC/DC converter that produces a regulated output voltage by automatically stepping

More information

LM3647 Reference Design User s Manual

LM3647 Reference Design User s Manual LM3647 Reference Design User s Manual GENERAL DESCRIPTION The LM3647 is a charge controller for Nickel-Cadmium (Ni- Cd), Nickel-Metal Hydride (Ni-MH) or Lithium-Ion (Li-Ion) batteries. The device uses

More information

5A Synchronous Buck Li-ion Charger With Adapter Adaptive

5A Synchronous Buck Li-ion Charger With Adapter Adaptive 5A Synchronous Buck Li-ion Charger With Adapter Adaptive General Description The is a 5A Li-Ion battery charger intended for 4.4~14 wall adapters. It utilizes a high efficiency synchronous buck converter

More information

Solar Power Energy Harvesting Electrical Integration

Solar Power Energy Harvesting Electrical Integration WHITEPAPER Solar Power Energy Harvesting Electrical Integration Contents Introduction... 1 Solar Cell Electrical Characteristics... 2 Energy Harvesting System Topologies... 4 Design Guide... 6 Indoor Single

More information

FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC

FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the

More information

LTC4063 Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator

LTC4063 Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator Features n Charge Current Programmable up to 1A n Integrated 1mA Adjustable Low Dropout Linear Regulator n Charges Single Cell Li-Ion Batteries Directly from USB Port n Preset Charge Voltage with ±.35%

More information

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 551A-B LITHIUM-ION BATTERY CHARGER WITH CHARGE TERMINATION

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 551A-B LITHIUM-ION BATTERY CHARGER WITH CHARGE TERMINATION DESCRIPTION LTC4002-8.4 Demonstration circuit 551A-B is a complete constant-current/constant- voltage battery charger designed to charge a two cell Lithium-Ion Battery. Programmed for 3A charge current,

More information

BL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC

BL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC 1 2 3 4 6 7 8 9 10 1 2 BG I LLHYW 3 BG LLHYW 4 6 7 8 9 10 DESCRIPTION The is a 2A Li-Ion battery switching charger intended for V adapters. Low power dissipation, an internal MOSFET and its compact package

More information

LM5576 Evaluation Board

LM5576 Evaluation Board LM5576 Evaluation Board Introduction The LM5576 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the

More information

2A Synchronous Buck Li-ion Charger

2A Synchronous Buck Li-ion Charger 2A Synchronous Buck Li-ion Charger General Description The is a 5A Li-Ion battery charger intended for 4.4V~14V wall adapters. It utilizes a high efficiency synchronous buck converter topology to reduce

More information

World s Smallest 1A Micro DC/DC

World s Smallest 1A Micro DC/DC Issue 3XTRA Includes 6 Page Selection Guide World s Smallest 1A Micro DC/DC IN THIS ISSUE XC9265 Ultra Low Power Step-Down DC/DC Converter XC6190 Push Button RESET Timer/Reboot Controller XC6803/04/05

More information

SC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications

SC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications Standalone Linear Li-Lon Battery Charger With Thermal Regulation Description The SC61A05 is a single-cell lithium-ion battery charger using a constant-current/ constant-voltage algorithm. It can deliver

More information

3.5A Synchronous Buck Li-ion Charger With Intelligent Path Management Adapter Adaptive and OTG

3.5A Synchronous Buck Li-ion Charger With Intelligent Path Management Adapter Adaptive and OTG 3.5A Synchronous Buck Li-ion Charger With Intelligent Path Management Adapter Adaptive and OTG General Description The is a 3.5A Li-Ion battery charger intended for 4.4V~14V wall adapters. It utilizes

More information

DEMO CIRCUIT 1473A QUICK LT3650EDD-8.4/8.2. LT3650EDD-8.4/8.2 2A Monolithic Li-Ion Battery Charger DESCRIPTION OPERATING PRINCIPLE

DEMO CIRCUIT 1473A QUICK LT3650EDD-8.4/8.2. LT3650EDD-8.4/8.2 2A Monolithic Li-Ion Battery Charger DESCRIPTION OPERATING PRINCIPLE DEMO CIRCUIT 1473A QUICK LT3650EDD-8.4/8.2 START GUIDE DESCRIPTION Demonstration Circuit 1473A is a 2A Monolithic Li-Ion Battery Charger featuring the LT3650EDD-8.4/8.2. The LT3650 is a complete mid-power

More information

HM5061 Max.1.6A Li-ion Switching Charger IC

HM5061 Max.1.6A Li-ion Switching Charger IC Max.1.6A Li-ion Switching Charger IC DESCRIPTION The HM5061 is a 1.6A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum

More information

Package: RN: SOT23-5 TRN: TSOT23-5 Features: P: Standard (default, lead free) C: Customized. 1uF

Package: RN: SOT23-5 TRN: TSOT23-5 Features: P: Standard (default, lead free) C: Customized. 1uF FEATURES Programmable Charge Current Up to 8mA No MOSFET, Sense Resistor or Blocking Diode Required Preset 4.2V Charge Voltage with ±1% Accuracy Charge Current Monitor Output for Gas Gauging Thermal Regulation

More information

HM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers

HM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V ~ 14V End-Charge-Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic

More information

AIC1781. Battery Charge Controller DESCRIPTION FEATURES APPLICATIONS

AIC1781. Battery Charge Controller DESCRIPTION FEATURES APPLICATIONS Battery Charge Controller FEATURES Fast Charge Control of NiMH/NiCd Batteries, even with a Fluctuating Charging Current. Fast Charge Termination by: T / t, V, 0 V, Safety Timer, Maximum Temperature, Maximum

More information

Low Power, Low Dropout, 250mA, RF - Linear Regulators

Low Power, Low Dropout, 250mA, RF - Linear Regulators Preliminary Datasheet GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input and deliver up to 25mA. They are the perfect choice

More information

ETA mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery APPLICATIONS ORDERING INFORMATION TYPICAL APPLICATION

ETA mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery APPLICATIONS ORDERING INFORMATION TYPICAL APPLICATION 800mA Fully Integrated Linear Charger for 1 Cell Li-ion Battery DESCRIPTION is a single cell, fully integrated constant current (CC)/constant voltage (CV) Li-ion battery charger. Its compact package with

More information

The XA4203 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers

The XA4203 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V-16V End - Charge - Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic

More information

Power Management Solution With 196 HVC ENYCAP TM for Mini Charger and Fixed Voltage Supply Board

Power Management Solution With 196 HVC ENYCAP TM for Mini Charger and Fixed Voltage Supply Board VISHAY BCCOMPONENTS www.vishay.com Aluminum Capacitors By Gerald Tatschl MAL29699003E3 96 HVC ENYCAP TM - MINI CHARGER AND BACKUP BOARD DESCRIPTION The MAL29699003E3 mini charger and backup demonstration

More information

AT1084 5A Low Dropout Positive Voltage Regulator

AT1084 5A Low Dropout Positive Voltage Regulator FEATURES DESCRIPTION Three-Terminal Adjustable or Fixed Output Output Current of 5A Low Dropout 1.3V at 5A Output Current Line Regulation: 0.04% Load Regulation: 0.2% Fast Transient Response OCP & OTP

More information

Switching & Protecting Electronics in Battery-Powered Systems

Switching & Protecting Electronics in Battery-Powered Systems Switching & Protecting Electronics in Battery-Powered Systems By Pinkesh Sachdev Product Marketing Engineer, Mixed Signal Products Linear Technology Corp. Introduction Battery-powered electronics poses

More information

All inclusive. #MAGICPOWERMODULES

All inclusive. #MAGICPOWERMODULES All inclusive. #MAGICPOWERMODULES MagI³C Power s are easy to use DC/DC converters with integrated regulator IC, power inductor and capacitors. Design and layout reviews as well as support with EMI fi lter

More information

CE3211 Series. Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS:

CE3211 Series. Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS: Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: The CE3211 is a complete constant-current/ constant-voltage linear charger for single cell lithium rechargeable battery.

More information

ETA A, 3MHz Switching Charger with Dynamic Power Path Management

ETA A, 3MHz Switching Charger with Dynamic Power Path Management 2.5A, 3MHz Switching Charger with Dynamic Power Path Management DESCRIPTION ETA6003 is a switching Li-Ion battery charger with dynamic power-path control and input current limiting. When a battery is connected,

More information

KA317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram.

KA317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram. www.fairchildsemi.com 3-Terminal 0.5A Positive Adjustable Regulator Features Output Current in Excess of 0.5A Output Adjustable Between 1.2V and 37V Internal Thermal Overload Protection Internal Short

More information

MAX17020 Evaluation Kit. Evaluates: MAX17020

MAX17020 Evaluation Kit. Evaluates: MAX17020 19-4132; Rev 0; 5/08 MAX17020 Evaluation Kit General Description The MAX17020 evaluation kit (EV kit) demonstrates the MAX17020 s standard application circuit. This dual Quick-PWM synchronous DC-DC converter

More information

500mA Linear Li-Ion Battery Charger in SOT23

500mA Linear Li-Ion Battery Charger in SOT23 500mA Linear Li-Ion Battery Charger in SOT23 General Description The is a standalone linear Li-ion battery charger with exposed pad SOT23 package. With few external components, is well suited for a wide

More information

GATE DRIVERS. diodes.com SINGLE / DUAL CHANNEL GATE DRIVERS. Low-side and high-side Gate Drivers with inverting and non-inverting options HALF-BRIDGE

GATE DRIVERS. diodes.com SINGLE / DUAL CHANNEL GATE DRIVERS. Low-side and high-side Gate Drivers with inverting and non-inverting options HALF-BRIDGE GATE DRIVERS SGLE / DUAL CHANNEL GATE DRIVERS Low-side and high-side Gate Drivers with inverting and non-inverting options HALF-BRIDGE GATE DRIVERS High-side / low-side and half-bridge Gate Drivers rated

More information

2A Switch-Mode Li-Ion Battery Charger

2A Switch-Mode Li-Ion Battery Charger 2A Switch-Mode Li-Ion Battery Charger General Description The is a highly integrated switch-mode Li-Ion Battery Charger. With few external components, is well suited for a wide range of portable applications.

More information

ACE4054C. 500mA/1.5A Standalone Linear Li-Ion Battery Charge

ACE4054C. 500mA/1.5A Standalone Linear Li-Ion Battery Charge Description The ACE4054C is a single cell, fully integrated constant current (CC)/ constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the

More information

FEATURES TYPICAL APPLICATIO. LTC4062 Standalone Linear Li-Ion Battery Charger with Micropower Comparator DESCRIPTIO APPLICATIO S

FEATURES TYPICAL APPLICATIO. LTC4062 Standalone Linear Li-Ion Battery Charger with Micropower Comparator DESCRIPTIO APPLICATIO S FEATURES Charge Current Programmable Up to 1A Charges Single-Cell Li-Ion Batteries Directly from USB Port Preset Float Voltage with ±.35% Accuracy Micropower Comparator for Battery Monitoring Thermal Regulation

More information

EV2456-J-00A 0.5A, 50V, 1.2MHz Step-Down Converter Evaluation Board

EV2456-J-00A 0.5A, 50V, 1.2MHz Step-Down Converter Evaluation Board EV2456-J-00A 0.5A, 50V, 1.2MHz Step-Down Converter Evaluation Board DESCRIPTION The EV2456-J-00A is an evaluation board for the MP2456, a high-voltage step-down regulator with a built-in power MOSFET.

More information

CE3151 Series. Standalone Linear Li-Ion Battery Charger with Thermal Regulation

CE3151 Series. Standalone Linear Li-Ion Battery Charger with Thermal Regulation Standalone Linear Li-Ion Battery Charger with Thermal Regulation INTRODUCTION: The CE3151 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its SOT

More information

Fully integrated constant current/constant voltage Li-ion battery charger

Fully integrated constant current/constant voltage Li-ion battery charger Description The ACE4054 is a single cell, fully integrated constant current (CC) / constant voltage (CV) Li-ion battery charger. Its compact package with minimum external components requirement makes the

More information

VS6102 Standalone Linear Lithium Battery Charger

VS6102 Standalone Linear Lithium Battery Charger General Description VS6102 is a complete constant-current & constant voltage linear charger for single cell lithium-ion batteries. Its SOT-23 package and low external component count make VS6102 ideally

More information

Model Number Output Voltage Output Amps Input Range Max. Iin FL Efficiency Max Output Power

Model Number Output Voltage Output Amps Input Range Max. Iin FL Efficiency Max Output Power Small 2.32 x 0.9 x 0.37 Size Constant Frequency High Typical Efficiency of 90% (12Vout) Low Output Noise 18 to 60VDC Input Voltage Range Output Over Voltage Protection Current Limit/Short Circuit Protection

More information

S24SP15004 series 60W Single Output DC/DC Converter

S24SP15004 series 60W Single Output DC/DC Converter 6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink

More information

1A Linear Li-Ion Battery Charger in SOP8/MSOP8

1A Linear Li-Ion Battery Charger in SOP8/MSOP8 1A Linear Li-Ion Battery Charger in SOP8/MSOP8 FP8102 General Description The FP8102 is a standalone linear Li-ion battery charger with exposed pad SOP8/MSOP8 package. With few external components, FP8102

More information

Delphi NC30 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V-5Vout, 30A

Delphi NC30 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V-5Vout, 30A FEATURES High efficiency: 94% @ 12Vin, V/3A out Voltage and resistor-based trim No minimum load required Output voltage programmable from.9vdc to.vdc via external resistors Fixed frequency operation Input

More information

PART MAX1612EEE MAX1613EEE TOP VIEW BBATT LRI +3.3V +5V V CPU

PART MAX1612EEE MAX1613EEE TOP VIEW BBATT LRI +3.3V +5V V CPU 19-4785; Rev ; 11/98 EALUATION KIT MANUAL FOLLOWS DATA SHEET Bridge-Battery Backup Controllers General Description The manage the bridge battery (sometimes called a hot-swap or auxiliary battery) in portable

More information

FEATURES. Input Voltage (VDC) 3.3

FEATURES. Input Voltage (VDC) 3.3 DC/DC Converter FEATURES 15W, wide input, isolated & regulated DC/DC converter CB Patent Protection Wide input voltage range (2:1) High efficiency up to 90% No-load power consumption as low as 0.12W Isolation

More information

L, LTC, LTM, LT, Burst Mode, OPTI-LOOP, Over-The-Top and PolyPhase are registered

L, LTC, LTM, LT, Burst Mode, OPTI-LOOP, Over-The-Top and PolyPhase are registered DEMO CIRCUIT 1568A QUICK START LT3652EDD GUIDE DESCRIPTION Demonstration Circuit 1568A is a 2A Monolithic Multi- Chemistry battery charger for solar power applications featuring the LT3652EDD. The LT3652

More information

TPS62730 step down converter for low-power RF applications

TPS62730 step down converter for low-power RF applications TPS62730 step down converter for low-power RF applications. Briefing presentation Presented by: Thomas Hoffman 1 Why was the part developed? 2 Market Situation Metering Mobility is an unbreakable trend

More information

WATT MBH SERIES DC/DC CONVERTERS

WATT MBH SERIES DC/DC CONVERTERS Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully

More information

Lithium-Ion Battery Charge Control for AC Charger Monolithic IC MM1707 Series

Lithium-Ion Battery Charge Control for AC Charger Monolithic IC MM1707 Series Lithium-Ion Battery Charge Control for AC Charger Monolithic IC MM1707 Series Outline This IC is a one-cell lithium ion battery charge control IC for AC chargers. The charging current and charging can

More information

SYMBOL PARAMETER FOR BOOST CONVERTER CONDITIONS MIN TYP MAX UNITS

SYMBOL PARAMETER FOR BOOST CONVERTER CONDITIONS MIN TYP MAX UNITS DEMO CIRCUIT 383B QUICK START GUIDE LT1930ES5/LT1931ES5 1.2MHz, SOT-23 DC/DC CONVERTER DESCRIPTION Demonstration Circuit 383B is multipurpose demonstration board featuring the LT1930 and LT1931. The demo

More information

1.2A Single-chip Li-ion and Li-POL Charge

1.2A Single-chip Li-ion and Li-POL Charge 1.2A Single-chip Li-ion and Li-POL Charge General Description The LP28012 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low

More information

QC 2.0 compliant Portable Power Bank Single Chip IC

QC 2.0 compliant Portable Power Bank Single Chip IC Features Internally embedded 1A Max. charge mode, charging current adjustable when under 1A; OVP function when charge, charge terminated when charge voltage over 6.2V; Trickling/CC/CV three charging stages,

More information

A4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION

A4063. AiT Semiconductor Inc.   APPLICATION ORDERING INFORMATION TYPICAL APPLICATION DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the

More information

output Output Voltage min (ma)

output Output Voltage min (ma) SERIES: VBT1-SMT DESCRIPTION: DC-DC CONVERTER date 11/01/2012 page 1 of FEATURES 1 W isolated industry standard 8 pin SMT package dual unregulated s 1,000 V isolation short circuit protection UL safety

More information

800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display

800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display 800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its SOT

More information

SM6781BV Ni-MH/Ni-Cd Battery Charger IC

SM6781BV Ni-MH/Ni-Cd Battery Charger IC Ni-MH/Ni-Cd Battery Charger IC OVERVIEW The SM6781BV is a quick charge control IC for Nickel Metal Hydride (NiMH) and Nickel-Cadmium (NiCd) rechargeable batteries. Quick charging ends in response to negative

More information

800mA Lithium Ion Battery Linear Charger

800mA Lithium Ion Battery Linear Charger GENERAL DESCRIPTION is a complete CC/CV linear charger for single cell lithium-ion batteries. it is specifically designed to work within USB power Specifications. No external sense resistor is needed and

More information

800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery

800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery 800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion

More information

DIO5538B 5~100mA,Single Li-ion Battery Charger

DIO5538B 5~100mA,Single Li-ion Battery Charger 5~100mA,Single Li-ion Battery Charger Rev 1.1 Features Broad Programmable Charging Current: 5~100mA Over-Temperature Protection Under Voltage Lockout Protection Reverse current protection between BAT and

More information

PT1054 Lithium Ion Battery Linear Charger

PT1054 Lithium Ion Battery Linear Charger GENERAL DESCRIPTION PT1054 is a complete CC/CV linear charger f or single cell lithium-ion batteries. it is specifically designed to work within USB power Specifications. No external sense resistor is

More information

ME4054 Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT ME4054

ME4054 Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT ME4054 Standalone Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT Standalone Linear Li-Ion Battery Charger in ThinSOT -4.2V DESCRIPTION is a constant-current/constant-voltage linear charger for

More information

AAT A/1.0A USB Port/Adapter Lithium-Ion/Polymer Battery Charger

AAT A/1.0A USB Port/Adapter Lithium-Ion/Polymer Battery Charger General Description Features BatteryManager The AAT3689 BatteryManager is a highly integrated single cell lithium-ion/polymer battery charger IC designed to operate with port and AC adapter inputs. It

More information

PG02S Series 2W DC/DC CONVERTER, SIP-Package

PG02S Series 2W DC/DC CONVERTER, SIP-Package PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature

More information

B70SR12424A/B/C/D 12V Output DC/DC Converter, Box Type Package

B70SR12424A/B/C/D 12V Output DC/DC Converter, Box Type Package B70SR12424A/B/C/D 12V Output DC/DC Converter, Box Type Package FEATURES Wide input voltage range, 36~106V 300W Output Full Load Efficiency up to 89.5% @48Vin; 90%@72Vin Intergrated fuse holder (option)

More information

Maxim > Design Support > Technical Documents > Application Notes > Battery Management > APP 663

Maxim > Design Support > Technical Documents > Application Notes > Battery Management > APP 663 Maxim > Design Support > Technical Documents > Application Notes > Battery Management > APP 663 Keywords: Proper Handling Helps Make the Most of Li-Ion Batteries APPLICATION NOTE 663 Proper Handling Helps

More information

DIO2054 DIO2051/2052/DIO2054. Descriptions. Features. Typical Application. Applications. Ordering Information

DIO2054 DIO2051/2052/DIO2054. Descriptions. Features. Typical Application. Applications. Ordering Information DIO2051/2052/DIO2054 Limited Datasheet For full content datatasheet, please go to Email datasheet.requiry@dioo.com Single/Dual/Quad, RailtoRail Low Power Amplifier /support/doc.html or Features RailtoRail

More information

B70SR24125A/B/C/D 24V Output DC/DC Converter, Box Type Package

B70SR24125A/B/C/D 24V Output DC/DC Converter, Box Type Package B70SR24125A/B/C/D 24V Output DC/DC Converter, Box Type Package FEATURES Wide input voltage range, 36~106V 300W Output Full Load Efficiency up to 92.5% @48Vin; 92.5%@72Vin Parallel Connection of multiple

More information

GM1117 GM1117V1.01. Features. Description. Application. Typical Application Circuits 1A LOW DROPOUT PRECISION VOLTAGE REGULATOR

GM1117 GM1117V1.01. Features. Description. Application. Typical Application Circuits 1A LOW DROPOUT PRECISION VOLTAGE REGULATOR Description The is a positive low dropout regulator and is available in an adjustable version and fixed output voltage from 1.5V to 5.0V. All internal circuitry is designed to operate down to 800mV input

More information

DESIGN KIT Low Power Point of Load Solutions

DESIGN KIT Low Power Point of Load Solutions Efficiency up to 97% DESIGN KIT Low Power Point of Load Solutions 600 ma to 1.5 A, Low Single and Dual Channel Converter Order Code IC-744 721 XRPWRKIT-LWP-1 Version 1.0 Exar Device Max. Output Current

More information

DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION

DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION LTC-./LTC- Step-p/Step-Down Switched Capacitor DC/DC Converters with Low-Battery Comparator FEATRES.V or V Output Voltages V to V Input Voltage Range p to ma Output Current Only Three External Capacitors

More information

1A Charge+ 3A Synchronous Boost PMIC

1A Charge+ 3A Synchronous Boost PMIC 1A Charge 3A Synchronous Boost PMIC General Description The is a PMIC,which has 1ch Charger and 1ch Synchronous Boost Converter with ESOP8 and TDFN10 package. Its charger is a complete constantcurrent

More information

General Description. Features. Component List. Component Suppliers

General Description. Features. Component List. Component Suppliers General Description The MAX5062A evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the performance of the MAX5062A 60V, 300mA ultra-small, high-efficiency, synchronous

More information

DT V 1A Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION

DT V 1A Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION GENERAL DESCRIPTION The DT7115 is a highly integrated 5V 1A Li-ion battery linear charging management device. The DT7115 charges a battery in three phases: trickle charging, constant current, and constant

More information

Silvertel. Ag Features. 2. Description. 57V Boost Converter Module. Small package. Suitable for IEEE802.3af and IEEE802.

Silvertel. Ag Features. 2. Description. 57V Boost Converter Module. Small package. Suitable for IEEE802.3af and IEEE802. Silvertel V1.0 May 2015 Datasheet Ag7100 Pb 1. Features Small package Suitable for IEEE802.3af and IEEE802.3at compliant PSEs Low cost High efficiency (>90%) Input voltage range 12V to 27V Minimal external

More information

RN5T566. Development Specifications. Rev RICOH COMPANY, LTD. Electronic Devices Company

RN5T566. Development Specifications. Rev RICOH COMPANY, LTD. Electronic Devices Company RN5T566 Development Specifications Rev.1.1 2012.06.11 RICOH COMPANY, LTD. Electronic Devices Company This specification is subject to change without notice. 2011-2012 Rev.1.1 Page 1 Table of Contents 1.

More information