1. WARNINGS 3. DAILY INSPECTION
|
|
|
- Georgia Phelps
- 5 years ago
- Views:
Transcription
1
2 Thank you for using this lift table. Your lift table is made of high quality steel and is designed for the horizontal lifting and transport of loads on a level, fixed base. For your safety and correct operation, please carefully read this instruction before using it and keep it on file for future reference. NOTE: All of the information reported herein is based on data available at the moment of printing. We reserve the right to modify our own products at any moment without notice and incurring in any sanction. So, it is suggested to always verify possible updates. 1. WARNINGS 1 DO NOT put foot or hand in scissors mechanism. 2 DO NOT allow other person to stand in front or behind lift table when it is moving. 3 DO NOT move lift table when table is in raised position. Load could fall down. 4 DO NOT enter under table. 5 DO NOT overload lift table. 6 DO NOT put foot in front of rolling wheels, Injury could fall down. 7 WATCH difference of floor level when moving lift table. Load could fall down. 8 DO NOT use lift table on slope or inclined surface, lift table may become uncontrollable and create danger. 9 DO NOT lift people. People could fall down and suffer severe injury. 2. CAUTION 1 Read this operation manual carefully and understand completely operating lift table. Improper operation could create danger. 2 This lift table is a movable lifter designed to lift or lower rated load on table. DO NOT use lift table for other purpose than its intended use. 3 DO NOT allow person to operate lift table that dose not understand its operation. 4 DO NOT lower table too fast. Load could fall down and create danger. 5 KEEP watching the condition of load. Stop operating lift table if load becomes unstable. 6 Braking lift table when sliding load on or off table. 7 DO NOT side or end load. Load must be distributed on at least 80% of table area. 8 DO NOT use lift table with unstable, unbalanced loosely load. 9 Practice maintenance work according to service instructions. 10 DO NOT modify lift table without manufacturers written consent. 11 REMOVE load from table and use safety stopper to prevent table from lowering when servicing lift table. 12 This lift table is not designed to be water resistant. Use lift table under dry condition. 3. DAILY INSPECTION Daily inspection is effective to find the malfunction or fault on lift table. Check lift table on the following points before operation. (1) Check for scratch, bending or cracking on the lift table.
3 (2) Check if there is any oil leakage from the cylinder. (3) Check the vertical creep of the table. (4) Check the smooth movement of the wheels. (5) Check the function of brake. (6) Check if all the bolts and nuts are tightened firmly. CAUTION: DO NOT use lift table if any malfunction or fault is found. 4. OPERATING LIFT TABLE 4-1. How to use the brake. CAUTION: Brake lift when not moving it in order to prevent sudden movement. The brake is equipped with the swivel caster on the right side. (1) Brake the wheel, press the brake pedal. (2) Release the brake, lift up the brake pedal. 4-2.Lifting the table WARNING 1. DO NOT overload lift table. Stay within its rated capacity. 2. DO NOT side or end. Load must be distributed on at least 80% of table area. Press the lifting pedal several times until the table reaches the desired position. The table does not elevate after reaching the highest position even if the lifting pedal is pressed. The table lowers slightly after reaching the highest position. MAXIMUM CAPACITY OF TABLE NOTE: The hydraulic cylinder is designed to hold table. As is the nature of hydraulic system, table lowers very slowly over and extended period of time. Please note the table does not stay at the same position indefinitely. 4-3.Lowering table WARNING: DO NOT put foot or hand in scissors mechanism Pull the control handle to make the table lower. 5. Specifications Model Capacity (kg) Table (mm) Table Height (mm) Wheel (mm) Weight ELT770N 350 / 770lbs 910x500 / 36x / / / 231lbs 6. Service Instructions 6-1. Lubricate each point described below every month: 6-2. Change hydraulic oil every 12 months. Lubricating Points (1) Fitting of cylinder---oil (2) Roller friction surface---grease (3) Link pin ---Oil ELT770N 350Kg / 770lbs (4) Pedal fitting point---oil (Kg)
4 (5) Grease nipple---grease 7. Parts List of Table No Mobile # Description Qty. 101M ELT770N-101M Handle Grip ELT770N-102 Control Handle ELT770N-103 Elastic Pin ELT770N-104 Nut ELT770N-105 Bolt with Hole ELT770N-106 Jacket ELT770N-107 Pull Rod ELT770N-108 Bolt ELT770N-109 Washer M ELT770N-110M Big Washer 2 111M ELT770N-111M Elastic Washer 2 112M ELT770N-112M Bolt ELT770N-113 Elastic Washer ELT770N-114 Nut ELT770N-118 Universal Wheel 2 119D ELT770N-119D Frame 1
5 120 ELT770N-120 Pin ELT770N-121 Washer ELT770N-122 Axle 2 No Mobile # Description Qty. 123 ELT770N-123 Bearing ELT770N-124 Wheel ELT770N-125 Retaining Ring 2 126D ELT770N-126D Pump Unit ELT770N-127 Pin ELT770N-128 Washer ELT770N-129 Retaining Ring 1 130D ELT770N-130D Pin ELT770N-131 Washer ELT770N-132 Retaining Ring 2 133D ELT770N-133D Connecting Rod ELT770N-134 Cushion ELT770N-135 Bolt ELT770N-136 Washer ELT770N-137 Elastic Washer ELT770N-138 Nut ELT770N-139 Protecting Cover ELT770N-140 Pedal Bar 1 141D ELT770N-141D Table ELT770N-142 Retaining Ring ELT770N-143 Roller ELT770N-144 Washer ELT770N-145 Roller ELT770N-146 Pin ELT770N-147 Bushing ELT770N-148 Retaining Ring ELT770N-149 Pin ELT770N-150 Retaining Ring 2 151D ELT770N-151D Fork Arm ELT770N-152 Bushing ELT770N-153 Pin ELT770N-154 Retaining Ring 2 156D ELT770N-156D Washer ELT770N-157 Support Plank ELT770N-158 Nut ELT770N-159 Screw 2 160D ELT770N-160D Long Shaft 2 161D ELT770N-161D Washer 4 162D ELT770N-162D Washer 4 163D ELT770N-163D Nut 4 164D ELT770N-164D Top Fork Arm 1
6 165 ELT770N-165 Protecting board ELT770N-166 Bolt ELT770N-167 Bushing 2 8. Parts List of Pump
7 No Mobile # Description Qty. 201 ELT770N-201 Seal Washer 1 202D ELT770N-202D Pump Cylinder 1 203D ELT770N-203D Dust Ring 1 204D ELT770N-204D Y-Seal 1 205D ELT770N-205D Pump Piston ELT770N-206 Spring ELT770N-207 Spring Cap ELT770N-208 Retaining Ring ELT770N-209 Joint Plate ELT770N-210 Pin 1 211D ELT770N-211D Pump Body ELT770N-212 Elastic Pin 1 214D ELT770N-214D Strike Pin 1 217D ELT770N-217D O-Ring 2 220D ELT770N-220D Lever Plate ELT770N-221 Nut ELT770N-222 Elastic Washer ELT770N-223 Washer ELT770N-224 Bolt With Hole ELT770N-225 Bolt With Hole 226 ELT770N-226 Nut ELT770N-227 Adjusting Bolt ELT770N-228 O-Ring ELT770N-229 Spring ELT770N-230 Seat of Steel Ball ELT770N-231 Steel Ball ELT770N-232 Steel Ball ELT770N-237 Seal Washer ELT770N-238 O-Ring ELT770N-239 Seal Washer 1
8 No Mobile # Description Qty. 240 ELT770N-240 Cylinder ELT770N-241 Housing ELT770N-242 Bolt ELT770N-243 Seal Washer ELT770N-244 Retaining Ring ELT770N-245 Washer ELT770N-246 O-Ring ELT770N-247 Cup Packing ELT770N-248 Piston ELT770N-249 O-Ring ELT770N-250 Piston Rod ELT770N-251 Seal Washer ELT770N-252 Cylinder Cap ELT770N-253 O-Ring ELT770N-254 Dust Ring ELT770N-256 Steel Ball ELT770N-257 Steel Ball ELT770N-258 Spring ELT770N-259 Steel Ball ELT770N-260 Screw ELT770N-261 Cup ELT770N-262 Seat of Steel Ball ELT770N-263 Spring ELT770N-264 Seat of Valve ELT770N-265 O-Ring ELT770N-266 Spring ELT770N-267 Core of Valve ELT770N-268 Retaining Ring ELT770N-269 Plug 1
9
WESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Scissors Lift Tables. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Part Number: 272970 & 272973 Note: Operator MUST read and understand these operating instructions before using this Heavy Duty Scissors Lift Table. TABLE OF CONTENTS 1 General
WESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Folding Handle Scissors Lift Table : 260201 Note: Operator MUST read and understand these operating instructions before using this Folding Handle Scissors Lift Table. TABLE
Instruction Manual. Note: Owner/Operator must read and understand this instruction
Instruction Manual HEX300 HEX500 Note: Owner/Operator must read and understand this instruction manual before using the table. Lift Table HEX Series HEX300, HEX500 Operation and Service Manual BEFORE OPERATING
Instruction Manual BS50D
Instruction Manual BS50D NOTE: Owner/Operator must read and understand this instruction manual before using the lift table. 1 Operation and Service Manual BEFORE OPERATING THE LIFT TABLE, READ THIS MANUAL
Instruction Manual MJ520 Mobile Hydraulic Scissor Lift Table 770 lbs. (350 kg)
Instruction Manual MJ520 Mobile Hydraulic Scissor Lift Table 770 lbs. (350 kg) WARNING! Read this operation manual carefully and understand fully the operating instructions. Improper use of this unit could
Instruction Manual MJ523 Mobile Hydraulic Scissor Lift Table 1650 lbs. (750 kg)
Instruction Manual MJ523 Mobile Hydraulic Scissor Lift Table 1650 lbs. (750 kg) WARNING! Read this operation manual carefully and understand fully the operating instructions. Improper use of this unit
Maxx-Mini Lift MML-100 Service Manual
Maxx-Mini Lift MML-100 Service Manual LIFT PRODUCTS INC PO BOX 349 ELM GROVE WI 53122 262-521-5720 FAX 262-521-5725 Toll Free 877-543-8776 Model: MML-100, MML-100XL S/N Customer REGISTRATION INFORMATION
Instruction Manual. BS Series
Instruction Manual BS Series NOTE: Owner/Operator must read and understand this instruction manual before using the lift table. RevB: 02/2009 1 Operation and Service Manual BEFORE OPERATING THE LIFT TABLE,
Instruction Manual For Auto Shift Hydraulic Lift Table
Instruction Manual For Auto Shift Hydraulic Lift Table Model Number: CART-550-AS Note: Owner/Operator must read and understand this Instruction Manual before operating the lift & tilt table. Contents 1
INSTRUCTION MANUAL MODELS COVERED: CART-300-S-HR, FOR PREMIUM SCISSOR LIFT CARTS CART-600-S-HR,, CART-1000-S-HR, CART-400-D-HR - 1 -
INSTRUCTION MANUAL FOR PREMIUM SCISSOR LIFT CARTS MODELS COVERED: CART-300-S-HR, CART-600-S-HR,, CART-1000-S-HR, CART-400-D-HR - 1 - Content 1. Warning.3 2. Caution..4 3. Name of parts...5 4. Daily inspection
Maxx-Mini Lift MMLE-50D Service Manual
Maxx-Mini Lift MMLE-50D Service Manual LIFT PRODUCTS INC PO BOX 349 ELM GROVE WI 53122 262-521-5720 FAX 262-521-5725 Toll Free 877-543-8776 Model: MMLE-50D S/N Customer REGISTRATION INFORMATION (To validate
MANUAL LIFTER TROLLEY INSTRUCTION MANUAL
MANUAL LIFTER TROLLEY INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand 2 www.jbstools.com WWW.CHALLENGERHOISTS.COM.AU
WESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Part Number: 260207 & 260208 Note: Operator MUST read and understand these operating instructions before using this. TABLE OF CONTENTS General Information... 2. Description...
Instruction Manual ELECTRIC LIFT TABLE. Model:ES50LB ES100L
Instruction Manual ELECTRIC LIFT TABLE Model:ES50LB ES100L Note: Owner/Operator must read and understand this instruction Manual before using the lift & tilt table. ELECTRIC LIFT TABLE Model ES50LB ES100L
500kg HYDRAULIC TABLE LIFT
Product Code: 6007T OWNER S MANUAL PRODUCT CODE: 6007T 500kg HYDRAULIC TABLE LIFT Working Load Limit 500kg Maximum Height 1575mm Minimum Height 440mm Table Dimensions 1010x520mm Wheel Diameter 150mm Made
Operating Instructions Parts List
Operating Instructions Parts List FH1025-SMS-001_EN Hand Stacker 1.0T/2.5M Note: Owner and operator MUST read and understand this operating instructions before use this hand stacker. Date:March, 2012 Welcome
Thank you for choosing our pallet truck. For your safety and correct operation, please carefully read the manual before use.
Thank you for choosing our pallet truck. For your safety and correct operation, please carefully read the manual before use. NOTE: All of the information reported herein is based on data available at the
Operating Instructions
Operating Instructions Parts List Hand Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Pallet Truck. Thank you for using our pallet truck. Your pallet
Long Deck Mobile Scissor Lift Table
globalindustrial.ca Distribucion Industrial Globales S DE RL DE CF User's manual Manual del usuario Manuel de l'utilisateur Customer Service US: 1-800-645-2986 Servicio de atención al Cliente México: 01.800.681.6940
HYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: , , , ,
HYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: 7631700, 7631705, 7631710, 7631715, 7631720 OPERATION & MAINTENANCE INSTRUCTIONS LS0316 INTRODUCTION Thank you for purchasing this CLARKE
Instruction Manual Pallet Truck with Load Indicator
Instruction Manual Pallet Truck with Load Indicator Note: Owner/Operator must read and understand this instruction manual before using the pallet truck with load indicator. RevA:04/007 Thank you for using
Electric Table Truck. ETAD Series. Eoslift Warehousing Equipment Corp. No.99, Yanjia Road, Yuantong Town, Haiyan, Zhejiang BEFORE YOU BEGIN
Electric Table Truck Operating Instructions ETAD Series BEFORE YOU BEGIN Electric TableTruck Model ETAD35 ETAD75 Instruction Manual Read this operation manual completely before using. thoroughly understand
Pallet Truck with Scale Instruction Manual
Pallet Truck with Scale Instruction Manual 11 Harbor Park Drive Port Washington, NY 11050 Table of Contents General Specifications.............................3 Maintenance......................................4
1. GENERAL SPECIFICATIONS 2. TO ATTACH DRAW-BAR TO PUMP UNIT
Thank you for using our pallet truck. Your pallet truck is made of high quality steel and is designed for the horizontal lifting and transport of loads on a pallet or standardized containers on a level,
Hand Pallet Truck OPERATION INSTRUCTIONS. Parts List. Note: Owner and operator MUST read and understand these
OPERATION INSTRUCTIONS Parts List Hand Pallet Truck Note: Owner and operator MUST read and understand these operating instructions before using this pallet truck. ATTENTION: 1. The waste packages should
Instruction Manual HAND PALLET TRUCK HP SERIES A. Note: Owner/Operator must read and understand this instruction
Instruction Manual HAND PALLET TRUCK HP SERIES A Note: Owner/Operator must read and understand this instruction manual before using the hand pallet truck. Thank you for choosing our pallet truck. For your
Operating Instructions
Operating Instructions Parts List Hand Pallet Truck PJ4400-2748-ACL Note: Operator MUST read and understand this operating instructions before use this Hand Pallet Truck. Thank you for using our pallet
HAND PALLET TRUCK TX SERIES. Note: Owner/Operator must read and understand this instruction. manual before using the hand pallet truck.
Instruction Manual HAND PALLET TRUCK TX SERIES Note: Owner/Operator must read and understand this instruction manual before using the hand pallet truck. Thank you for choosing our pallet truck. For your
INSTRUCTION MANUAL VESTIL MANUFACTURING CORP. MODELS NUMBER: PM4-xxxx-LP URL:
INSTRUCTION MANUAL FOR Low Profile 4,000 lbs. Pallet Truck MODELS NUMBER: PM4-xxxx-LP VESTIL MANUFACTURING CORP. 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703 TELEPHONE: (260) 665-7586 -OR- TOLL
Instruction Manual Pallet Truck with Load Indicator
Instruction Manual Pallet Truck with Load Indicator Note: Owner/Operator must read and understand this instruction manual before using the pallet truck with scale. Thank you for using this hand pallet
On-A-Roll Lifter Instruction Manual for Standard Models Read Before Use!
On-A-Roll Lifter Instruction Manual for Standard Models Read Before Use! Important instructional, safety and precautionary information! It is the user s responsibility to exercise good judgment, common
Instruction Manual. High Lift Hand Truck
Instruction Manual High Lift Hand Truck Note: The Owner/Operator must read carefully and understand all the information presented here before operation. CONTENT 1. Specification. 2 2. Safety Instructions...
Page 1 Instructions Manual for LTH-500 (J055)23/06/201 INSTRUCTION MANUAL. LTH-500 Hydraulic Lifter Trolley 500kg Load Capacity J055
Page 1 Instructions Manual for LTH-500 (J055)23/06/201 INSTRUCTION MANUAL LTH-500 Hydraulic Lifter Trolley 500kg Load Capacity J055 Page 2 Instructions Manual for LTH-500 23/06/201 (J0 SP300 / SPA300 SP500
AIR/HYDRAULIC LIFT TABLE CART 770-LB.
AIR/HYDRAULIC LIFT TABLE CART 770-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
Hydraulic Hand Pallet Trucks
Operating Instructions & Parts Manual 12U124 Please read and save these instructions. Read carefully before attempting to assemble, install, operate, or maintain the product described. Protect yourself
Operating Instructions Parts List
Operating Instructions Parts List SPN0 Semi-Electric Stacker Note:Owner and Operator MUST read and understand this operating instructions before use this stacker. Welcome to use our half-electric stacker
VESTIL MANUFACTURING CORP. OPERATION & SERVICE MANUAL PORTABLE DRUM JACK (DRUM-55-S) 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703
OPERATION & SERVICE MANUAL PORTABLE DRUM JACK (DRUM-55-S) VESTIL MANUFACTURING CORP. 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703 TELEPHONE: (260) 665-7586 -OR- TOLL FREE (800) 348-0868 FAX:
ELECTRIC LIFTER TROLLEY INSTRUCTION MANUAL
ELECTRIC LIFTER TROLLEY INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand 2 www.jbstools.com WWW.CHALLENGERHOISTS.COM.AU
Instruction Manual FM180. NOTE: Owner/Operator must read and understand this instruction manual before using the mover.
Instruction Manual FM180 NOTE: Owner/Operator must read and understand this instruction manual before using the mover. Contents 1. Application 2. Specifications 3. Assembly 4. Precautions and Preparation
Instruction Manual. Low Profile Lift Table
Instruction Manual Low Profile Lift Table Note: Owner/Operator must read and understand this instruction manual before using the low profile lift table. THANK YOU VERY MUCH FOR SELECTING OUR PRODUCT. THIS
Hand Pallet Truck 2.5 tons
For your safety Please read this instruction manual before you use the Hand Pallet Truck! Contents: Part List and Instruction Model.: XTN 540-1150 Please keep these instructions for future reference. Hand
1 2 " H Y D R AU L I C V E H I C L E P O S I T I O N I N G J A C K OWNER S MANUAL
2 " H Y D R AU L I C V E H I C L E P O S I T I O N I N G J A C K OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
BFQ Hand Pallet Truck -Quick Lift Operation Manual
BFQ Hand Pallet Truck -Quick Lift Operation Manual Original instruction Ningbo Ruyi Joint Stock Co.,Ltd 656 North Taoyuan Road, Ninghai 315600,Zhejiang,P.R. China EC Declaration of Conformity According
HIGH LIFTER MANUAL, LAKERET
ORIGINAL INSTRUCTIONS TRANSLATED ENGLISH EDITION, VERSION 02, applicable FROM 1 January 2016 HIGH LIFTER MANUAL, LAKERET OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY
The Specification EA15 Series Semi-Electric Stacker Note: Before using must read this manual and the various warning label!
The Specification EA15 Series Semi-Electric Stacker Note: Before using must read this manual and the various warning label! EKKO Material Handling Equipment Manufacturing, Inc. Contents Preface... - 2-1.
3000-Lb. Vehicle Positioning Jacks. Owner s Manual
3000-Lb. Vehicle Positioning Jacks Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
Service Jacks. Operating Instructions & Parts Manual. Model Number. Capacity 4 Ton 4 Ton Air/ Manual 10 Ton 10 Ton Air/ Manual HW93657/ HW93660
Service Jacks Operating Instructions & Parts Manual Model Number HW93657 HW93667 HW93660 HW93662 Capacity 4 Ton 4 Ton Air/ Manual 10 Ton 10 Ton Air/ Manual Made in North America HW93657/ HW93660 HW93667/
Forklift Jack. Scissors Max. Capacity: 4 ton Scissors Low Height: 2-5/32 in. (55 mm) Scissors High Height: 17-29/32 in. (455 mm)
655 Eisenhower Drive Owatonna, MN 55060 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223 Fax:
Hand Pallet Truck NC. Operation Manual
Hand Pallet Truck -------NC Operation Manual Operation Manual 1 Application Range This product is suitable for using in rated load of up to 5500lbs. This PL5500HD is the perfect jack for handling palletized
1250 LB. CAPACITY MECHANICAL WHEEL DOLLY
1250 LB. CAPACITY MECHANICAL WHEEL DOLLY 67287 SET-UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result
OPERATION & SERVICE MANUAL DRUM (MANUAL DRUM LIFTER)
OPERATION & SERVICE MANUAL DRUM-55-36 (MANUAL DRUM LIFTER) Vestil Manufacturing Corp. 2999 North Wayne St., Angola, IN 46703 Ph: 260-665-7586. Fax: 260-665-1339 E-mail: Sales@vestil.com Website: www.vestil.com
FRONT SUSPENSION GROUP CONTENTS GENERAL INFORMATION SPECIFICATIONS STRUT ASSEMBLY FRONT SUSPENSION DIAGNOSIS.
33-1 GROUP 33 FRONT SUSPENSION CONTENTS GENERAL INFORMATION 33-2 SPECIFICATIONS 33-3 FASTENER TIGHTENING SPECIFICATIONS 33-3 GENERAL SPECIFICATIONS 33-3 SERVICE SPECIFICATIONS 33-3 LUBRICANT 33-3 DIAGNOSIS
OPERATORS MANUAL/INSTRUCTIONS/PARTS & SERVICE FOR MANUAL & ELECTRIC
OPERATORS MANUAL/INSTRUCTIONS/PARTS & SERVICE FOR MANUAL & ELECTRIC TABLE OF CONTENTS SAFETY DELIVERY INSPECTION OPERATION 4 MAINTENANCE 5 TROUBLE SHOOTING 5 PARTS 6-15 Frame Scissor Assembly 6-7 Thrust
FRONT SUSPENSION GROUP CONTENTS GENERAL INFORMATION ON-VEHICLE SERVICE FASTENER TIGHTENING SPECIFICATIONS...
33-1 GROUP 33 FRONT SUSPENSION CONTENTS GENERAL INFORMATION 33-2 FASTENER TIGHTENING SPECIFICATIONS 33-2 GENERAL SPECIFICATIONS 33-3 SERVICE SPECIFICATIONS 33-3 LUBRICANTS 33-3 DIAGNOSIS 33-4 INTRODUCTION
WESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Semi Electric Pallet Truck. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Heavy Duty Semi Electric Pallet Truck Part Number: 273289 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. Table
HYDRAULIC PALLET TRUCK. MODEL No: PTE550 PART Nos OPERATION & MAINTENANCE INSTRUCTIONS
HYDRAULIC PALLET TRUCK MODEL No: PTE550 PART Nos 7630171 OPERATION & MAINTENANCE INSTRUCTIONS 0604 Please read these instructions carefully before operating the truck Thank you for purchasing this CLARKE
EBSL22N OPERATING INSTRUCTIONS. Parts List
OPERATING INSTRUCTIONS Parts List EBSL22N Note: Owner and operator MUST read and understand the operating instructions before using the Hand Pallet Truck. SPAREPARTS LIST Manual Scissor Lift Pallet Truck/
FRONT SUSPENSION LOCATION INDEX
1. Remove the front suspension tower bar. (See FRONT SUSPENSION TOWER BAR REMOVAL/INSTALLATION.) 2007 Mazda MX-5 Miata Sport 2007 SUSPENSION Front Suspension - MX-5 Miata FRONT SUSPENSION LOCATION INDEX
Air-Assist Service Jack Max. Capacity: 10 Tons
Form No. 565786 Parts List & Operating Instructions for: 1511B Air-Assist Service Jack Max. Capacity: 10 Tons 109 67 66 68 77 69 70 78 95 94 107 106 108 26 71 72 72 93 X L 65 75 92 91 90 89 88 87 86 85
Racing Jack Max. Capacity: 3,000 lbs. (1,361 kg)
R SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:
WESCO INDUSTRIAL PRODUCTS, INC. Deluxe Foot Pump Fork Pallet Truck. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Deluxe Foot Pump Fork Pallet Truck Part Number: 272766 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. TABLE OF
4400-Lb. Capacity Pallet Jack
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item#
FRONT SHOCK ABSORBER
FRONT SHOCK ABSORBER INSTALLATION AND USER S INSTRUCTIONS Thank you for purchasing a MAZDASPEED accessory. Before removal and installation, be sure to thoroughly read these instructions. Please read the
OPERATION MANUAL. Note: Owner and operator MUST read and understand the operating instructions before using the Hand Pallet Truck. Date:2014.
OPERATION MANUAL Note: Owner and operator MUST read and understand the operating instructions before using the Hand Pallet Truck. Date:2014.07 1 MLX55 SERVICE CHECK LIST OPERATION A. With control lever
Instruction Manual. Hydraulic Jack. Note: The Owner/Operator must read carefully and understand all the information presented here before operation.
Instruction Manual Hydraulic Jack Note: The Owner/Operator must read carefully and understand all the information presented here before operation. 0 Contents 1 Warning in advance 2 2 Description.. 2 3
STACKER INSTRUCTION MANUAL
STACKER INSTRUCTION MANUAL The Mobile Stackers are lifting devices featuring easy, flexible, reliable and safe operation suitable for transportation of loads in such applications as warehouses, manufacturing
MODEL H6287-H6289 PALLET JACKS INSTRUCTIONS
MODEL H6287-H6289 PALLET JACKS INSTRUCTIONS Specifications Model H6287 H6288 H6289 Capacity Overall Fork Dimensions Individual Fork Width Minimum Fork Height Maximum Fork Height 1,000 Lbs. 4,000 Lbs. 5000
INSTALLATION, OPERATION & MAINTENANCE MANUAL
INSTALLATION, OPERATION & MAINTENANCE MANUAL SJ-35 3,500 LB SLIDING BRIDGE JACK FOLLOW THIS MANUAL CAREFULLY TO ENSURE THE MACHINE WILL FUNCTION CORRECTLY AND PROVIDE MANY YEARS OF DEPENDABLE SERVICE.
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Titan Series Hand Pallet Trucks Model LCF55 - Freezer Special
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Model LCF55 - Freezer Special Lift-Rite, 5975 Falbourne Street, Mississauga, Ontario
Service Jack. Form No Parts List & Operating Instructions 1510B. Max. Capacity: 5 and 10 Tons. 1 of 3. Sheet No. Issue Date: Rev.
SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:
High Lift Transmission Jack Max. Capacity: kg (1,000 lbs.)
655 EISENHOWER DRIVE OWATONNA, MN 55060-0995 USA PHONE: (507) 455-7000 TECH. SERV.: (800) 533-6127 FAX: (800) 955-8329 ORDER ENTRY: (800) 533-6127 FAX: (800) 283-8665 INTERNATIONAL SALES: (507) 455-7223
ABACO MACHINES OPERATION MANUAL STONE/STEEL/GLASS/WOODS LIFTER (ASSGWL20) ABACO MACHINES (USA)
ABACO MACHINES OPERATION MANUAL STONE/STEEL/GLASS/WOODS LIFTER (ASSGWL20) ABACO MACHINES (USA) 14508 S. Garfield Ave., Paramount, CA 90723, USA Tel : 310-532-0366 Fax : 310-532-99 Email : sales@abacomachines.com
Motorcycle/ATV Lift. Max. Capacity: 1,500 lbs. Parts List
SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 55-7000 Tech. Serv.: (800) 533-627 Fax: (800) 955-89 Order Entry: (800) 533-627 Fax: (800) 283-8665 International Sales: (507)
REAR SUSPENSION GROUP CONTENTS GENERAL DESCRIPTION REAR SUSPENSION DIAGNOSIS LOWER ARM AND TOE CONTROL ARM ASSEMBLY...
34-1 GROUP 34 CONTENTS GENERAL DESCRIPTION........... 34-2 DIAGNOSIS.... 34-2 INTRODUCTION....................... 34-2 TROUBLESHOOTING STRATEGY........ 34-2 SYMPTOM CHART..................... 34-3 SYMPTOM
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Hand Pallet Trucks Model SS45
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Hand Pallet Trucks Model SS45 This publication, 1188027A, applies to the Lift-Rite Hand Pallet Truck, Model SS45 and
HYDRAULIC PALLET TRUCKS
HYDRAULIC PALLET TRUCKS HYDRAULIC PALLET TRUCKS MODEL Nos: PT550 GAL & PT685 GAL PART Nos: 7630234 & 7630236 OPERATION & MAINTENANCE INSTRUCTIONS 0204 Please read these instructions carefully before operating
HYDRAULIC PALLET TRUCK
HYDRAULIC PALLET TRUCK Models; PT550C & PT685C Part Nos 7630172 & 7630177 OPERATING & MAINTENANCE INSTRUCTIONS GC05/12 INTRODUCTION Thank you for purchasing this CLARKE Pallet Truck. Before attempting
PALLET TRUCK PAINTED OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY
ORIGINAL INSTRUCTIONS TRANSLATED ENGLISH EDITION, VERSION 01, APPLICABLE FROM 1 OCTOBER 1998 PALLET TRUCK PAINTED OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY 192.810-E01
Instruction Manual. Forklift-Karrier
Instruction Manual Forklift-Karrier Note: The Owner/Operator must read carefully and understand all the information presented in this manual before using this device. - 0 - Contents 1. Figure and Parameter
FRONT SUSPENSION GROUP CONTENTS GENERAL INFORMATION FASTENER TIGHTENING SPECIFICATIONS GENERAL SPECIFICATIONS...
33-1 GROUP 33 FRONT SUSPENSION CONTENTS GENERAL INFORMATION 33-2 FASTENER TIGHTENING SPECIFICATIONS 33-2 GENERAL SPECIFICATIONS 33-3 SERVICE SPECIFICATIONS 33-3 DIAGNOSIS 33-4 INTRODUCTION TO DIAGNOSIS
MANUAL HYDRAULIC FORK LIFTER OPERATION DIRECTIONS ES1015(PA1015)
MANUAL HYDRAULIC FORK LIFTER OPERATION DIRECTIONS ES1015(PA1015) 1 MANUAL HYDRAULIC FORK LIFTER OPERATION DIRECTIONS Ⅰ.Use ES1015(PA1015) manual hydraulic fork lifter is a dual-purpose tool for high-lifting
Air Assist Bottle Jack Max. Capacity: 12 Tons (4313C) & 20 Tons (4321C) Operating Range: psi
Form No. 545742 Parts List and Operating Instructions for: 4313C 4321C Air Assist Bottle Jack Max. Capacity: 12 Tons (4313C) & 20 Tons (4321C) Operating Range: 40 150 psi 45 44 43 42 41 40 39 22 1 37 28
FRONT SUSPENSION GROUP 33A 33A-1 CONTENTS GENERAL DESCRIPTION... 33A-2 FRONT SUSPENSION DIAGNOSIS. 33A-3 LOWER ARM... 33A-13 SPECIAL TOOLS...
33A-1 GROUP 33A FRONT SUSPENSION CONTENTS GENERAL DESCRIPTION......... 33A-2 DIAGNOSIS. 33A-3 INTRODUCTION TO DIAGNOSIS........................ 33A-3 DIAGNOSIS TROUBLESHOOTING STRATEGY...... 33A-3 SYMPTOM
GROUP 33A 33A-1 CONTENTS GENERAL DESCRIPTION... 33A-2 FRONT SUSPENSION DIAGNOSIS. 33A-3 LOWER ARM... 33A-13 SPECIAL TOOLS... 33A-5
33A-1 GROUP 33A CONTENTS GENERAL DESCRIPTION 33A-2 DIAGNOSIS 33A-3 INTRODUCTION TO FRONT SUSPENSION DIAGNOSIS 33A-3 DIAGNOSIS TROUBLESHOOTING STRATEGY 33A-3 SYMPTOM CHART 33A-3 SYMPTOM PROCEDURES 33A-3
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Models LCR55 and LCS55 Versions This publication, 1130442C, applies to the Lift-Rite
Distributed by Ergonomic Partners DANDY LIFT
Distributed by Ergonomic Partners sales@ergonomicpartners.com 314-884-8884 www.ergonomicpartners.com DANDY LIFT For model numbers L-150, L-250, A-350W, A-500 & A-800, this manual is for Serial number L-106701
Instruction Manual Standard (MJ484-MJ489) and Heavy Duty (MJ490-MJ495) Hydraulic Hand Pallet Truck
Instruction Manual Standard (MJ484-MJ489) and Heavy Duty (MJ490-MJ495) Hydraulic Hand Pallet Truck 9008-08/15/07 Warning! Read and understand the entire operator s manual before using the pallet truck.
REAR SUSPENSION GROUP CONTENTS GENERAL DESCRIPTION TRAILING ARM REAR SUSPENSION DIAGNOSIS TOE CONTROL ARM...
34-1 GROUP 34 CONTENTS GENERAL DESCRIPTION 34-2 DIAGNOSIS 34-3 INTRODUCTION TO DIAGNOSIS 34-3 DIAGNOSTIC TROUBLESHOOTING STRATEGY 34-3 SYMPTOM CHART 34-3 SYMPTOM PROCEDURES 34-3 SPECIAL TOOLS 34-5 ON-VEHICLE
ESCO EQUIPMENT SUPPLY COMPANY FORKLIFT JACK. Instruction Manual. Forklift Jack
FORKLIFT JACK Instruction Manual 10885 Forklift Jack 1 Specifications Scissors Capacity Post Capacity 4 Tons 5 Tons Minimum-Maximum Scissors Height 2.5 to 16.7 Minimum-Maximum Post Height 16.4 to 28.5
ALUMINUM JACK. 3,000 lb. Jack Capacity & JACK STAND COMBO. Model ASSEMBLY AND OPERATING INSTRUCTIONS
ALUMINUM JACK 3,000 lb. Jack Capacity & JACK STAND COMBO 6,000 lb. Jack Stand Capacity (when used in pairs) Model 91850 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011
MANUAL HYDRAULIC FORK LIFTER OPERATION DIRECTIONS ES1025(PA1025)
MANUAL HYDRAULIC FORK LIFTER OPERATION DIRECTIONS ES1025(PA1025) 1 MANUAL HYDRAULIC FORK LIFTER OPERATION DIRECTIONS Ⅰ.Use ES1025(PA1025) manual hydraulic fork lifter is a dual-purpose tool for high-lifting
Low Lift Transmission Jack
655 Eisenhower Drive Owatonna, MN 55060 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223 Fax:
REAR SUSPENSION GROUP CONTENTS GENERAL DESCRIPTION TRAILING ARM ASSEMBLY REAR SUSPENSION DIAGNOSIS
34-1 GROUP 34 CONTENTS GENERAL DESCRIPTION......... 34-2 DIAGNOSIS.. 34-3 INTRODUCTION TO DIAGNOSIS........................ 34-3 DIAGNOSIS TROUBLESHOOTING STRATEGY...... 34-3 SYMPTOM CHART...................
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Models LCM50, LCU50, and Four-Way Versions This publication, 114374C, applies to the
HEAVY DUTY TROLLEY JACK. Operation Manual
HEAVY DUTY TROLLEY JACK 4T Operation Manual Make sure to read and fully understand the instruction manual before using this product and keep the manual properly 1 General Description Product Description
Air / Hydraulic Floor Service Jack
655 Eisenhower Drive Owatonna, MN 55060 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223 Fax:
Manual Operated Floor Jack
Manual Operated Floor Jack OPERATING INSTRUCTIONS Note: There may be some slight differences in the appearance of the various manually-operated floor jacks, however the instructions in this manual apply
Long Chassis Hydraulic Service Jacks
Long Chassis Hydraulic Service Jacks Operating Instructions & Parts Manual Model Number Atd-7390 Atd-7391 Capacity 5 Ton 10 Ton Atd Tools Inc. 160 Enterprise Drive, Wentzville MO 63385 Printed in China
Cylinder Installation Compression/Stripper, for Models, 22HF, 16HF, 1600 machines
Knowledge Base Article Type: Instructions Cylinder Installation Compression/Stripper, for Models, 22HF, 16HF, 1600 machines Description: Instructions on How to properly install stripper beam and compression
Read this entire manual before operation begins.
Read this entire manual before operation begins. Record below the following information which is located on the serial number data plate. Serial No. Model No. Date of Installation Contents Specifications.............