These door closers should NOT be installed on the exposed side (weather side) of exterior doors.

Size: px
Start display at page:

Download "These door closers should NOT be installed on the exposed side (weather side) of exterior doors."

Transcription

1 500 Series Non-Hold Open Door Closer Instructions vailable in Sizes,, and 5 Regular rm See Page n incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These installation instructions should be followed to avoid the possibility of misapplication or misadjustment. Regular rm See Page Left Hand Door - LH Right Hand Reverse - RHR Parallel rm See Pages & Left Hand Door - LH Right Hand Reverse - RHR NOTE: For special applications, a separate door and frame preparation template is packed with these instructions. Use this instruction sheet for installation sequence and closer adjustments only. Dimensions are based on standard doors and frames with /8" clearance, 5/8" stops, and square edge doors. Door and frame must be properly reinforced. Right Hand Door - RH Left Hand Reverse - LHR Parallel rm See Pages & Right Hand Door - RH Left Hand Reverse - LHR Non-Handed Door Closers. See Page 5 Left Hand Door - LH Right Hand Reverse - RHR NOTE: For pplication longer connecting rod is required for reveals greater than " (76mm) Reveal See Page 5 Right Hand Door - RH Left Hand Reverse - LHR These door closers should NOT be installed on the exposed side (weather side) of exterior doors. TOOLS REQUIRED METL WOOD Self Drilling Screws Wood and Metal Sleeve Nut and olt For wood, drill /6" hole Drill 9/" thru from Closer Side /8" Drill other Side #7 /"- 0 /6" Machine Screws #7 Drill, /"- 0 Tap Check building and fire codes to see if your application requires the use of sleeve nuts and bolts. COMPONENT PRTS LTCH VLVE MIN RM REGULR RM/TOP JM SHOE SCREW PCK SWEEP VLVE PRLLEL RM RCKET FORERM SCREW CLOSER RM PINION CP HGER COMPNIES 9 Victor Street, St. Louis, MO 60 (800) Fax (800) 78-09

2 500 Series Non-Hold Open Door Closer - Regular rm Instructions. PRTS. MRK ND DRILL HOLES (Right Hand Shown) -/8" (9mm) /" (9mm) 9-/6" (0 mm) Speed regulating valves toward hinge edge. -/" (mm) -/8" (9mm) For Opening to 0 For Opening to 80 5-/" (0mm) " (05mm) -/6" (0mm) 0-9/6" (68mm) Dimensions apply to "all sizes". Select hand of door and degree of door opening. Fold template on the corresponding line for desired degree of door opening and hand. Match this line with the hinge edge and door and attach template to door. e sure frame line on template lines up with the bottom edge of frame face. Mark, prep and drill/tap /" - 0 holes for closer body and jamb shoe mounting screws.. INSTLL CLOSER. INSTLL MIN RM 5. INSTLL MIN RM ND FRME RIGHT HND DOOR 90 RIGHT NGLE Remove template and use mounting screws to install the closer body to the door and the jamb shoe to the frame. Closer body should be oriented so that the speed regulating valves are toward the hinge stile of door. Orient main arm so that the, located on the main arm, is on the same side of the closer as the speed regulating valves. The main arm will point out away from the door. Screw connecting rod into forearm of main arm. Rotate main arm until connecting rod is at a 90 angle to frame. While holding arm in this position, tighten down forearm screw. 6. DJUSTMENTS 7. INSTLL PINION CP See djustments on Page 6 for setting Sweep Speed and Latch Speed. Press pinion cap onto un-used closer body spindle. NOTE: Do not fully unscrew valves or hydraulic fluid will leak and closer will no longer be functional. PINION CP HGER COMPNIES 9 Victor Street, St. Louis, MO 60 (800) Fax (800) 78-09

3 500 Series Non-Hold Open Door Closer - Parallel rm Instructions. PRTS. MRK ND DRILL HOLES (Right Hand Shown) 7/6" (mm) -/" (70mm) " (5mm) /8" (0mm) /" (mm) Select hand of door and the degree of door opening. Fold template on the corresponding line for desired degree and hand. Fold or cut upper corner illustrated on template and align template with the hinge edge of door. t the Frame Stop Line fold toward you and attach template to door. Mark, prep and drill/tap /"-0 holes for closer body and parallel arm bracket mounting screws. (Center on Hinge) For Opening to 0 For Opening to /6" (0mm) 9-/6" (0mm) 6-9/6" (67mm) 7-/6" (95mm) Dimensions apply to "all sizes". Top of Door /" (9mm) " (76mm) 9-/6" (0 mm) (Center on Hinge) Speed regulating valves toward lock stile. Frame. INSTLL CLOSER. INSTLL Remove template and use mounting screws to install the closer body to the door and the parallel arm bracket to the frame soffit. Closer body should be oriented so that the speed regulating valves are toward the lock stile of door. 5. INSTLL MIN RM For parallel arm application only, remove regular arm / top jamb shoe. ttach connecting rod to the parallel arm plate. Rotate 5 Use adjustable wrench to rotate spindle 5 counterclockwise for Right Hand Door (RH) or clockwise for Left Hand Door (LH). Place main arm on spindle so that the (RH) or (LH), located on the main arm, is adjacent to the door. Secure main arm and spindle by tightening spindle bolt. HGER COMPNIES 9 Victor Street, St. Louis, MO 60 (800) Fax (800) 78-09

4 500 Series Non-Hold Open Door Closer - Parallel rm Instructions 6. INSTLL MIN RM ND a) -/" (8mm) Screw connecting rod into forearm of main arm until pivot point is -/" from door surface. b) -/" (8mm) While holding arm in this position, tighten down forearm screw. 7. DJUSTMENTS 8. INSTLL PINION CP See djustments on Page 6 for setting Sweep Speed and Latch Speed. NOTE: Do not fully unscrew valves or hydraulic fluid will leak and closer will no longer be functional. Press pinion cap onto un-used closer body spindle. PINION CP HGER COMPNIES 9 Victor Street, St. Louis, MO 60 (800) Fax (800) 78-09

5 500 Series Non-Hold Open Door Closer - rm Instructions. PRTS. MRK ND DRILL HOLES (Right Hand Shown) -/" (mm) 9-/6" (0 mm) -/" (mm) /" (9mm) /" (mm) Speed regulating valves toward hinge edge. Top of Frame For Opening to 0 For Opening to /8" (mm) -/8" (08mm) -7/6" (87mm) 9-5/6" (5mm) Dimensions apply to "all sizes". longer connecting rod is required for reveals greater than " (76mm) Reveal Select hand of door and the degree of door opening. Separate template sections and. Fold template on the corresponding line for desired degree and hand. Match this line with the hinge edge of door and attach template to door. e sure Frame line on template lines up with the top edge of door. Using a square, project Closer Projection Line on section of template onto frame and use to align and attach section. e sure to align bottom edge of section with edge of frame. Mark, prep and drill/tap /"- 0 holes for connecting rod shoe and closer body mounting screws.. INSTLL CLOSER. INSTLL MIN RM 5. INSTLL MIN RM ND RIGHT HND DOOR MIN RM 90 RIGHT NGLE CONNECTING ROD FRME Remove template and use mounting screws to install the closer body to the top jamb and the connecting rod shoe to the door. Closer body should be oriented so that the speed regulating valves are toward the hinge stile of door. MIN RM Orient main arm so that the, located on the main arm, is on the same side of the closer as the speed regulating valves. The main arm will point out away from the door. POSITION OF MIN RM WHEN SSEMLING TO SPINDLE Screw connecting rod into forearm of main arm. Rotate main arm until connecting rod is at a 90 angle to frame. While holding arm in this position, tighten down forearm screw. 6. DJUSTMENTS 7. INSTLL PINION CP PINION CP See djustments on Page 6 for setting Sweep Speed and Latch Speed. Press pinion cap onto un-used closer body spindle. NOTE: Do not fully unscrew valves or hydraulic fluid will leak and closer will no longer be functional. HGER COMPNIES 9 Victor Street, St. Louis, MO 60 (800) Fax (800)

6 500 Series Non-Hold Open Door Closer - djustments Instructions DJUSTMENTS (USE SCREWDRIVER FOR THESE DJUSTMENTS) SWEEP SPEED LTCH SPEED OPTIONL CKCHECK C Note: djust closing time speed to between and 7 seconds from 90 to 0. Greater closing times may be required for elderly or handicapped. SPRING POWER DJUST TLE OF SIZES Closer is available in sizes,, and 5. The chart on the right shows the recommended door and closer size. djust latch speed so door completely closes and latches. Regular rm & Parallel rm Exterior (and Vestibule) Door Width Minimum Door Width (") " - 0" - 6" - " (60mm) (76mm) (9mm) (067mm) Size Size Size 5 Size Size 5 djust backcheck accordingly to prevent excessive opening speed. Interior Door Width Minimum Door Width (") " - 0" - " - 8" - 8" - 5" (60mm) (76mm) (865mm) (965mm) (9mm) (7mm) Regular rm & Parallel rm Size Size Size Size 5 Size Size Size Size 5 DJUSTMENT DIGRM RM PLCEMENT IN SHOE 7-/% Stronger or or 7-/% Weaker HGER COMPNIES 9 Victor Street, St. Louis, MO 60 (800) Fax (800)

Installation Instructions. Non Hold Open Models. Sized (Sizes 2,3,4,5) Weaker BC 9303BC 9304BC 9305BC. Stronger +

Installation Instructions. Non Hold Open Models. Sized (Sizes 2,3,4,5) Weaker BC 9303BC 9304BC 9305BC. Stronger + O Right Hand RH eft Hand Reverse HR eft Hand H Right Hand Reverse RHR eft Hand H Right Hand Reverse RHR Regular rm ee Page Top Jamb ee Page Parallel rm ee Pages 3 & UTION Instructions Non Hold Open Models

More information

Series 9540 J9540. Installation Instructions Multi-Sized 1 to 6 Non-Hold Open. Regular Arm Applications. Parallel Arm Applications

Series 9540 J9540. Installation Instructions Multi-Sized 1 to 6 Non-Hold Open. Regular Arm Applications. Parallel Arm Applications Series 940 J940 ASSA JL940 ABLOY Installation Instructions Multi-Sized to 6 Non-Hold Open Regular Arm Applications Left Hand Regular Arm Application Contents Page Template Template with 984-8 Drop Plate

More information

DC3210 Series. Multi-Sized 1 thru 6 DEEP REVEAL APPLICATION WITH M103 OPTION(615F59 CLAMP KIT) Recommended Closer Size

DC3210 Series. Multi-Sized 1 thru 6 DEEP REVEAL APPLICATION WITH M103 OPTION(615F59 CLAMP KIT) Recommended Closer Size DC310 Series Multi-Sized 1 thru 6 Installation Instructions Universal Closers with Heavy Duty Spring Stop Parallel Arms A11 - Non- Arm A1 - Arm STANDARD APPLICATION WITH DEEP REVEAL APPLICATION WITH M103

More information

TS93 PT/PTH. Surface applied door closer. Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH)

TS93 PT/PTH. Surface applied door closer. Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH) Surface applied door closer Installation instructions: Push side track mount with dead stop (PT) Optional hold open (PTH) TABLE OF CONTENTS Technical specifications Size selection chart 2 Closer setup

More information

Installation Instructions

Installation Instructions eft Hand Door H ight Hand everse H ight Hand Door H eft Hand everse H ight Hand Door H eft Hand everse H egular rm ee Page Top Jamb ee Page 5 Parallel rm ee Pages & Instructions CUTION n Incorrectly installed

More information

TS9356 PKT 90/119. Surface applied door closer. Installation instructions: Pocket door track mount in 90 /119 pocket (Closer on wall)

TS9356 PKT 90/119. Surface applied door closer. Installation instructions: Pocket door track mount in 90 /119 pocket (Closer on wall) TS96 PKT 90/9 Surface applied door closer Installation instructions: Pocket door track mount in 90 /9 pocket (Closer on wall) TABLE OF CONTENTS Closer overall Technical specifications Door templates Closer

More information

ASSA ABLOY Universal Door Closers

ASSA ABLOY Universal Door Closers Installation Instructions For Non-Hold Open or A Hold Open Arm Options DC6200 Series DC6400 Series Multi-Sized thru 6 Half-Size thru 6 Regular Arm Parallel Arm Universal Door Closers Jamb Mount See pages

More information

ASSA ABLOY Universal Door Closers with Heavy Duty Spring Stop Parallel Arms

ASSA ABLOY Universal Door Closers with Heavy Duty Spring Stop Parallel Arms DC610 Series Multi-Sized 1 thru 6 DC610 Series Half-Size 1 thru 6 Installation Instructions Universal Closers with Heavy Duty Spring Stop Parallel Arms A11 - Non- Arm A1 - Arm STANDARD APPLICATION WITH

More information

Hinge (Pull) Side Door Application DC6230 Series Multi-Sized 1 thru 6 DC6430 Series Half-Size 1 thru 6. Door Mounted DC6230 & DC6430

Hinge (Pull) Side Door Application DC6230 Series Multi-Sized 1 thru 6 DC6430 Series Half-Size 1 thru 6. Door Mounted DC6230 & DC6430 Installation Instructions Universal Door Closers Slide Track Application (0 Maximum Door Swing) (standard)- N.H.O. Bumper Stop A - H.O. Bumper Stop Track - Pull Side See pages 2 & Hinge (Pull) Side Door

More information

Installation Instructions (07-08) CAUTION

Installation Instructions (07-08) CAUTION Hinge Edge of Hinge Edge of 7500 eries Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should

More information

Installation Instructions CAUTION

Installation Instructions CAUTION Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility

More information

1000 SERIES SURFACE MOUNTED CLOSERS

1000 SERIES SURFACE MOUNTED CLOSERS 1000 SERIES SURFCE MOUNTED CLOSERS PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/ transom without adapter plates.

More information

MOUNTING FINISH COVER CYLINDER **ARM FUNCTION REGULAR (DOUBLE) DESIGNER METAL NON-HANDED NON-SIZED

MOUNTING FINISH COVER CYLINDER **ARM FUNCTION REGULAR (DOUBLE) DESIGNER METAL NON-HANDED NON-SIZED HINGE (PULL) SIDE MOUNT LCN 4010 SERIES The 4010 SMOOTHEE is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. FEATURES Ten Million

More information

8000 Series Tri-Style Non Handed Door Closer

8000 Series Tri-Style Non Handed Door Closer 8000 eries Trityle Non Handed Do Closer eft Hand Do H ight Hand everse H eft Hand Do H ight Hand everse H eft Hand Do H ight Hand everse H egular rm ee Page ee Page 5 Parallel rm ee Pages 3 & 4 Instructions

More information

ASSA ABLOY MPI (Infinite Hold Open Range) Support Unit Models. Multi-Point Electromechanical Overhead Concealed Closer Holder Releasing Device

ASSA ABLOY MPI (Infinite Hold Open Range) Support Unit Models. Multi-Point Electromechanical Overhead Concealed Closer Holder Releasing Device Overhead Concealed Closer Holder Releasing Device with Rigid Slide Arm For wood or metal doors 1-3/4 to 2-1/4" (45-57mm) thick Hung in a hollow metal frame Standard butt hinges Typical Installation One

More information

TS93 EMF T/PT/TDE. Surface applied door closer

TS93 EMF T/PT/TDE. Surface applied door closer TS9 EMF T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer (no smoke detector) (EMF T) Push side track mount closer (no smoke detector) (EMF PT) Double egress

More information

Series. Non Hold Open Door Closers Parallel Arm. * conditions permitting. Parts. Mark and Drill Holes. Installation Sequence.

Series. Non Hold Open Door Closers Parallel Arm. * conditions permitting. Parts. Mark and Drill Holes. Installation Sequence. Instructions CUTION n Increctly installed improperly adjusted do closer can cause property damage personal injury. These installation instructions should be followed to avoid the possibility of misapplication

More information

5300 Series 5300 SERIES

5300 Series 5300 SERIES 5300 Series Hager 5300 Series Grade 1 door closer is ideal for schools, hospitals, and other high abuse and high traffic environments. It is constructed of an aluminum alloy and provides smooth door control.

More information

*4110 HCUSH mount shown

*4110 HCUSH mount shown *PARALLEL ARM (PUSH SIDE) MOUNT The 4110 SMOOTHEE is LCN s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications. FEATURES Standard 4110 series

More information

3010 Series. 4 Latch. Hold Open Arm Door Closers Regular Arm. Installation Sequence. Mark and Drill Holes. Parts. Sweep. Set Hold Open.

3010 Series. 4 Latch. Hold Open Arm Door Closers Regular Arm. Installation Sequence. Mark and Drill Holes. Parts. Sweep. Set Hold Open. 000 eries Tri-Packed Non Handed Closer Instructions eft Hand - H ight Hand everse - H eft Hand - H ight Hand everse - H egular rm ee Page ee Page 5 eft Hand - H ight Hand everse - H Parallel rm ee Pages

More information

Door Controls DOOR CLOSERS

Door Controls DOOR CLOSERS Door Controls Hager door closers offer architects, contractors, and building owners a superior product with proven reliability. In fact, our 5100, 5200, and 5300 Series Grade 1 models are the only closers

More information

1000 Series surface mounted closers

1000 Series surface mounted closers 1000 surface mounted closers PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/4 transom without adapter plates.

More information

4840 with EDA arm and 459 Door Loop

4840 with EDA arm and 459 Door Loop PARALLEL ARM (PUSH SIDE) MOUNTING The 4840 AUTO EQUALIZER is LCN s pneumatically powered MULTI- DOOR solution. This low-energy automatic operator provides easy access for people with disabilities, or the

More information

Installation Instructions Series 78-B/FHA Hold Open

Installation Instructions Series 78-B/FHA Hold Open Installation Instructions Series 78-B/FHA Hold Open Traditional Style Door Closers Read these instructions before proceeding with the installation. Make sure that the door opens the full angle desired

More information

Standard closer offers 3 installation options. - Regular (Pull side) - Top Jamb (Push side) - Parallel Arm (Push side)

Standard closer offers 3 installation options. - Regular (Pull side) - Top Jamb (Push side) - Parallel Arm (Push side) The LCN is a non-handed surface mounted closer designed for maximum versatility. wide choice of options, mounting accessories and ease of installation make this a fully universal closer. The LCN has been

More information

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH FOLLOWING ARM SETS: JH, JHZ and JPH9 Strength Adjustment From Size 1 Through 6.

SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH FOLLOWING ARM SETS: JH, JHZ and JPH9 Strength Adjustment From Size 1 Through 6. GENT 1331 DOO COE INTTION INTUCTION WITH FOOWING M ET: JH, JH and JPH9 trength djustment From ize 1 Through 6. CUTION: FIUE TO INT O DJUT POPEY MY EUT IN INJUY O DMGE FO ITNCE, C GENT T 1800775477 or www.argentlock.com

More information

D O O R C L O S E R S

D O O R C L O S E R S DOOR CLOSERS DOOR CLOSER Philadelphia Hardware Group, Inc. is presenting the finest ADVANTAGE surface mounting door closers certified by BHMA including: Multi-size door closer: 9000, 8000, 6000, 6000S

More information

D o o r C l o s e r s

D o o r C l o s e r s Door Closers DOOR CLOSER Philadelphia Hardware Group, Inc. is presenting the fi nest ADVANTAGE surface mounting door closers for your various application demands. There are Multi-size door closer: 9000,

More information

Cover. Finishes/Colors/ Powder Coat FINISH PLASTIC METAL

Cover. Finishes/Colors/ Powder Coat FINISH PLASTIC METAL 1450 Features The 1450 cast aluminum closer was specially designed to deliver consistent, dependable, long-term performance in frequently-used, low-abusive traffic areas. The patented design, featuring

More information

1461 Series Door controls

1461 Series Door controls 1461 Series Door controls Fire Rated: Tested on fire door assemblies in accordance with ustralian Standards, refer fire door manufacturer for specific approval details The LCN 1461 Series is a non-handed

More information

PULL SIDE MOUNTED PUSH SIDE MOUNTED DOUBLE LEVER ARM LEVER ARM P DOUBLE LEVER ARM SINGLE LEVER ARM 4110T 4210T*

PULL SIDE MOUNTED PUSH SIDE MOUNTED DOUBLE LEVER ARM LEVER ARM P DOUBLE LEVER ARM SINGLE LEVER ARM 4110T 4210T* 4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on

More information

Power drill Center punch Wire stripper

Power drill Center punch Wire stripper Pull Side Applications with Slide Track (7110SZ, 7150SZ) (see page 7 for template) 7100SZ Series SafeZone Installation and Instruction Manual Patent Pending 3 1 Push Side Applications with Double Lever

More information

ROFU TJ 152-A. Y ALE SECURITY GROUP 50BC Series Door Closer. 50BC Series Door Closers. Sizing Chart for Installations. Ordering Information

ROFU TJ 152-A. Y ALE SECURITY GROUP 50BC Series Door Closer. 50BC Series Door Closers. Sizing Chart for Installations. Ordering Information ROFU 50BC Series Door Closers Specifications U.L. Listing All Yale 50 Series Door Closers with non-hold-open arms are listed by Underwriters Laboratories, Inc. for use on labeled fire doors. Tri-Pack Closer

More information

5200 Series

5200 Series 5200 Series 5200 Series Closers are engineered and designed to offer the ideal combination of appearance and reliability. The 5200 Series Closers are constructed of aluminum alloy to be installed on exterior

More information

1250 Series. Features. Special Templates. Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act

1250 Series. Features. Special Templates. Grade 1 - ANSI A156.4, UL 10C, ADA, 100 Hour Salt Spray, Meets BAA - Buy American Act Features The 1250 cast aluminum closer is designed for low-frequency and low abusive traffic areas. This cast aluminum closer is ideal for aluminum storefronts, interior offices and many other applications.

More information

PUSH SIDE M O U N T E D PULL SIDE M O U N T E D D O U B L E LEVER ARM LEVER ARM P D O U B L E LEVER ARM S I N G L E LEVER ARM

PUSH SIDE M O U N T E D PULL SIDE M O U N T E D D O U B L E LEVER ARM LEVER ARM P D O U B L E LEVER ARM S I N G L E LEVER ARM 4000 SERIES PRODUCT SELECTION GUIDE Surface mounted 4000 Series LCN closers feature a modern design engineered for each application, easy installation, and superior performance. This guide is based on

More information

High Security Closers Series

High Security Closers Series High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can

More information

*HINGE (pull) side mount shown

*HINGE (pull) side mount shown CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) LCN 4040 SERIES The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged

More information

Tri-Style 1600H Series Non Handed Door Closer

Tri-Style 1600H Series Non Handed Door Closer OY Non Handed loser egular rm ee Page eft Hand H ight Hand everse H eft Hand H ight Hand everse H eft Hand H ight Hand everse H ee Page 5 Parallel rm ee Pages & 4 UTION Instructions Trityle 100H eries

More information

Finishes/Colors/ Powder Coat

Finishes/Colors/ Powder Coat Features The 4030 is a cast iron, universal closer designed specifically for doors in moderate traffic conditions. This versatile closer compliments the rest of the heavy duty 4000 and offers the choice

More information

LCN 4040 SERIES. CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE)

LCN 4040 SERIES. CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) CLOSER MOUNTS HINGE (PULL SIDE) (Shown) TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) The 4040 SUPER SMOOTHEE is LCN s most flexible heavy duty closer designed for institutional and other rugged high traffic

More information

ASSA ABLOY Series Multi-Point Hold Open Installation and Instruction Manual

ASSA ABLOY Series Multi-Point Hold Open Installation and Instruction Manual Pull Side Applications with Slide Track (7210, 7250) (see page 7 for template) 7200 Series Multi-Point Hold Open Installation and Instruction Manual 3 1 Push Side Applications with Double Lever Arms (7220,

More information

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING CAUTION 80-957-00-00 (08-0) Series 570 Openings 85 to 0 or to 70 Double Lever Arm Application for Frame Reveals (76) to 7 (78mm)* Stop (Push) Side of Installation 5700 LEO Operator Installation Instructions

More information

4040XP Series Door controls

4040XP Series Door controls 4040XP Series Door controls Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The LCN 4040XP Series is a non-handed

More information

LCN Super Smoothie Adjustable Closer Super Smoothie Adjustable Closer

LCN Super Smoothie Adjustable Closer Super Smoothie Adjustable Closer 4041 Super Smoothie Adjustable Closer Parallel Arm Mount Shown 4041 Super Smoothie Adjustable Closer The 4041 SUPER SMOOTHIE is a heavy duty, double lever arm closer for institutional and other high traffic

More information

HIGH SECURITY CLOSERS SERIES

HIGH SECURITY CLOSERS SERIES HIGH SECURITY CLOSERS SERIES PRODUCT SELECTION GUIDE High Security LCN closers feature a vandal resistant design engineered for each application, easy installation, and superior performance. This guide

More information

*HINGE (pull) side mount shown COVER ACCESSIBILITY NON-HANDED NON-SIZED AVB**

*HINGE (pull) side mount shown COVER ACCESSIBILITY NON-HANDED NON-SIZED AVB** CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) 4040XP SERIES The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding

More information

6900 PowerMatic Low Energy Power Operator Installation Instructions CAUTION CAUTION WARNING

6900 PowerMatic Low Energy Power Operator Installation Instructions CAUTION CAUTION WARNING CUTION 80-99-0110-00 (09-08) 900 PowerMatic Low Energy Power Operator Installation Instructions Hinge (Pull) Side of Door Installation for Door Openings 8 to 110 Use Series 910 Rigid rm and Slide Track

More information

HIGH SECURITY SERIES

HIGH SECURITY SERIES HIGH SECURITY SERIES PRODUCT SELECTION GUIDE High Security LCN closers feature a vandal resistant design engineered for each application, easy installation, and superior performance. This guide is based

More information

DOUBLE LEVER ARM DOUBLE LEVER ARM SINGLE LEVER ARM 5010 SINGLE LEVER ARM

DOUBLE LEVER ARM DOUBLE LEVER ARM SINGLE LEVER ARM 5010 SINGLE LEVER ARM SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of the closer.

More information

The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications.

The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications. Features The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications. Certifications Body Construction Fluid Handing Grade 1

More information

KEANE MONROE a member of the record group

KEANE MONROE a member of the record group SERIES 3000 / 3100 MICROPROCESSOR CONTROL REGULAR ARM SLIDE ARM / SLIDE ARM W/PANIC BREAKAWAY SERIES 3000 / 3100 Page 1. INDEX and OPERATOR HANDING The KM Series 3000/3100 operators have been carefully

More information

LCN 4010T SERIES HINGE (PULL) SIDE

LCN 4010T SERIES HINGE (PULL) SIDE HINGE (PULL) SIDE MOUNT The 4010T SMOOTHEE is LCN s best performing heavy duty track closer designed specifically for interior doors in institutional and other rugged high traffic applications. FEATURES

More information

HOW TO TELL HAND OF DOOR:

HOW TO TELL HAND OF DOOR: *15022* 4410ME Series 15022 Door closer with electronic release & Multi-point hold open Installation Instructions 1 Closer Installation 1a Closer Information Closer is handed at the factory. The hand of

More information

Tri-Style 1600 Series Non Handed Door Closer

Tri-Style 1600 Series Non Handed Door Closer CAUTION Trityle 100 eries Non Handed Do Closer CAUTION 809312502020 (1202) An Increctly installed improperly adjusted do closer can cause property damage personal injury. These installation instructions

More information

CONCEALED CLOSER SERIES

CONCEALED CLOSER SERIES CLOSER SERIES PRODUCT SELECTION GUIDE The concealed LCN closers feature a modern design for concealment in either the head frame or top rail of the door. This guide is based on the desired mounting of

More information

1000 SERIES SURFACE MOUNTED CLOSERS

1000 SERIES SURFACE MOUNTED CLOSERS 1000 SERIES SURFACE MOUNTED CLOSERS PRODUCT SELECTION GUIDE Surface mounted 1000 Series LCN closers feature a modern slim line design for easy installation on narrow head frames and top rails. This guide

More information

5700 Series Power Operator Stop (Push) Side Mount Installation and Instruction

5700 Series Power Operator Stop (Push) Side Mount Installation and Instruction 5700 Series Power Operator Stop (Push) Side Mount ASSAManual ABLOY Installation and Instruction 80-957-0005-00 (06-5) Patents 5,88,97; 7,6,096; 7,8, 5 6 0 8 7 9 -/8 () Item No. Description Back plate Door

More information

D-1610/D-1611 SERIES: DOOR CLOSERS. D-1610/D-1611 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY.

D-1610/D-1611 SERIES: DOOR CLOSERS. D-1610/D-1611 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY. D-1610/D-1611 SERIES: DOOR CLOSERS D-1610/D-1611 Series Door Closers Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS General Information...2, 3 Standard Application...4 Parallel

More information

*24828* 1 Installation. Left Hand Shown, Right Hand Opposite. Customer Service

*24828* 1 Installation. Left Hand Shown, Right Hand Opposite. Customer Service *24828* 4820 24828 Non-Handed/Non-Sized Auto-Equalizer Low Energy Door Operator, Installation and Adjustment of Door Operator Installation Instructions Long Cover Cover Insert Cover Left Hand Door Right

More information

Connected To Control Box Series. Closer. Set Screw. Arm Screw. Right Hand Shown. 1/8" I.D. Air Inlet Tubing Connected To Control Box

Connected To Control Box Series. Closer. Set Screw. Arm Screw. Right Hand Shown. 1/8 I.D. Air Inlet Tubing Connected To Control Box *19963* 19963 Auto-Equalizer Low Energy Door Operator 1/8" I.D. Air Inlet Tubing Connected To Control Box Closer 2610 Series Set Screw Arm Screw Track Roller Track Installation Instructions Top Of Door

More information

*HINGE (pull) side mount shown

*HINGE (pull) side mount shown CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) Designed for maximum versatility, the 1460, available with multiple cover options, can be used for both commercial and institutional

More information

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY 0 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) / Replacement Motor Key (00KEY) Rod

More information

4000 Series mounted closers

4000 Series mounted closers 4000 mounted closers APPLICATIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Adapter plates and other installation accessories available

More information

7100SZ Series SafeZone Installation and Instruction Manual

7100SZ Series SafeZone Installation and Instruction Manual 7100SZ Series SafeZone Installation and Instruction Manual Patent Pending 80-9371-0081-00 (10-10) Pull Side Applications with Slide Track (7110SZ, 7150SZ) (see page 5 for template) 3 1 Push Side Applications

More information

*HINGE (pull) side mount shown

*HINGE (pull) side mount shown CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PULL SIDE) STOP FACE (PUSH SIDE) The 4040T SMOOTHEE is LCN s most flexible heavy duty track closer designed specifically for interior doors in institutional and

More information

CONCEALED CLOSER SERIES

CONCEALED CLOSER SERIES CONCEALED CLOSER SERIES APPLICATIONS n For aluminum, hollow metal, or wood doors and frames. n Can be used with hinge or pivot mounted door. n Closers for 4 or minimum 1-3/4 head frame or 4 top rail. n

More information

High Security Closers Series

High Security Closers Series High Security Closers APPLICATIONS n For any concealed or surface mounted installation subject to potential abuse or vandalism. n For correctional, aluminum, hollow metal, or wood doors and frames. n Can

More information

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING

Requirements LEO Power Operator Installation Instructions Patents: 5,881,497; 7,316,096; 7,484,333 CAUTION CAUTION WARNING CAUTION 80-957-00-00 (08-0) Series 570 Door Openings 85 to 0 or to 80 Adjustable Arm and Slide Track Application Maximum Hinge Side Frame Reveal to /8 (mm) Hinge (Pull) Side of Door Installation 5700 LEO

More information

DC5000 Series. Cam Action Door Closer

DC5000 Series. Cam Action Door Closer Series Cam Action Door Closer Introduction Table of Contents Introduction...2 Features... 3 Mountings... 4 Accessories... 5 How to Order... 6 Quick Codes... 6 Helpful Terms... 7 Specifications... 8 Applications

More information

1450 Series. Key Features. LCN quality and value, backed by a 25-year warranty. Medium duty cast aluminum door closer

1450 Series. Key Features. LCN quality and value, backed by a 25-year warranty. Medium duty cast aluminum door closer Medium duty cast aluminum door closer LCN quality and value, backed by a 25-year warranty. The 1450 cast aluminum closer was specially designed to deliver consistent, dependable, long-term performance

More information

U1500. Surface Applied Door Closers

U1500. Surface Applied Door Closers U1500 Surface Applied Door Closers U1500 SURFACE APPLIED DOOR CLOSERS U1500 SERIES SURFACE CLOSERS CONTENTS U1500 Surface Applied Door Closers Technical Details/Specifications 3 Features 3 Ordering Guide

More information

LCN 4310ME SERIES FEATURES HINGE (PULL) SIDE MOUNTING. The 4310ME SENTRONIC is a. heavy duty, electrically controlled

LCN 4310ME SERIES FEATURES HINGE (PULL) SIDE MOUNTING. The 4310ME SENTRONIC is a. heavy duty, electrically controlled HINGE (PULL) SIDE MOUNTING The 4310ME SENTRONIC is a heavy duty, electrically controlled closer/holder designed to provide infinitely adjustable hold-open for FEATURES fire and smoke barrier doors. Door

More information

351 SERIES POWERGLIDE DOOR CLOSER

351 SERIES POWERGLIDE DOOR CLOSER 351 SERIES POWERGLIDE DOOR CLOSER Table of Contents Page How to Select the Proper Closer 1 Cutaway Illustrations and 351 Features 2 351 Standard Applications 3-4 351 Top Jamb Applications 5-6 351 Parallel

More information

NON-SIZED SIZED HANDED

NON-SIZED SIZED HANDED HINGE (PULL) SIDE MOUNTING 4310ME SERIES The 4310ME SENTRONIC is a heavy duty, electrically controlled closer/holder designed to provide infinitely adjustable hold-open for fire and smoke barrier doors.

More information

Closer with traditional styling for low to moderate traffic openings 78-B/F DOOR CLOSER CATALOG

Closer with traditional styling for low to moderate traffic openings 78-B/F DOOR CLOSER CATALOG Closer with traditional styling for low to moderate traffic openings 78-B/F S E R I E S DOOR CLOSER CATALOG Introduction The 78-B/F Series is a surface closer with traditional styling that offers multiple

More information

*24771* 4040SE DE Sentronic. 1 Voltage. 7 Regulation. 2 Track. 8 Door Closer Cover. 3 Spring Power. 4 Arm Installation. 5 Arm Screw.

*24771* 4040SE DE Sentronic. 1 Voltage. 7 Regulation. 2 Track. 8 Door Closer Cover. 3 Spring Power. 4 Arm Installation. 5 Arm Screw. *2477* 2477 SE Egress 4040SE DE Sentronic Installation Instructions This closer features mounting options for both standard and step-down double egress frames. Before beginning, determine which type of

More information

Norton ABS-AMERICAN BUILDING SUPPLY, INC Series Multi-Sized Closers - Packed 6 per case

Norton ABS-AMERICAN BUILDING SUPPLY, INC Series Multi-Sized Closers - Packed 6 per case ABS-AMERICAN BUILDING SUPPLY, INC. 1601 Series Multi-Sized Closers - Packed 6 per case Features Two Power Ranges: Each series can be adjusted through a range of sizes: Series 1601 Normal Power Range Closers,sizes

More information

D-3550 / D-3551 SERIES: DOOR CLOSERS. D-3550 / D-3551 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY.

D-3550 / D-3551 SERIES: DOOR CLOSERS. D-3550 / D-3551 Series. Door Closers. Trusted experts. Proven reliability. Simply STANLEY. D-3550 / D-3551 SERIES: DOOR CLOSERS D-3550 / D-3551 Series Door Closers Trusted experts. Proven reliability. Simply STANLEY. TABLE OF CONTENTS General Information...2, 3 How To Order...3 Standard Application...4

More information

4640 shown POWER OPERATOR HOLD-OPEN ACCESSIBILITY* NON-HANDED NON-SIZED

4640 shown POWER OPERATOR HOLD-OPEN ACCESSIBILITY* NON-HANDED NON-SIZED TOP JAMB (PUSH SIDE) MOUNTING The 4640 AUTO EQUALIZER is LCN s SMART & RELIABLE electrically powered low-energy power operator. It provides easy access for people with disabilities, or the elderly. Designed

More information

9000 Series Trinity The world's most intelligent door closer

9000 Series Trinity The world's most intelligent door closer 9000 Series Trinity The world's most intelligent door closer INTRODUCTION Designed for doors that are subject to changing conditions, the Norton 9000 Series Trinity offers customers an intelligent door

More information

51 Series Door Closers. An ASSA ABLOY Group brand

51 Series Door Closers. An ASSA ABLOY Group brand 51 Series Door Closers An ASSA ABLOY Group brand Introduction contents Features & Benefits...3 Overview...4 Fasteners...4 Features...5 Finishes...6 How to Order...7 Applications...8 Technical Details...9-11

More information

General Information 351 Series Powerglide

General Information 351 Series Powerglide General Information Closer Spring Adjustment (not shown) Effects the entire cycle of the door closer movement Used to size closer for application requirements Determines the amount of force with which

More information

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY

ASSA ABLOY Series Power Operator Installation and Instruction ASSA Manual ABLOY ASSA ABLOY 00 Series Power Operator Installation and Instruction ASSA Manual ABLOY Item No. Description Motor (00M) Cover (00COV) Control Inverter (00IN) Power Supply VDC (00PS) Track Assembly (0-) / Replacement

More information

LCN 9740 SERIES SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE

LCN 9740 SERIES SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE SINGLE DOOR, SURFACE MOUNT (PUSH) OFFSET PIVOT/BUTT HINGE 9740 series operator is shipped with motor gearbox, control box, regular arm, header, and mounting hardware. Actuators available separately, see

More information

7500/7700 SERIES. Institutional Door Closer

7500/7700 SERIES. Institutional Door Closer Institutional Door Closer Page Revised Electronically 5/13, 10/13 7500/7700 SERIES overview The 7500 Series Door Closer offers customers the ideal combination of superior performance, strength and quality.

More information

1430/1431 SERIES POWERGLIDE DOOR CLOSERS

1430/1431 SERIES POWERGLIDE DOOR CLOSERS 1430/1431 SERIES POWERGLIDE DOOR CLOSERS 1430/1431 Series Powerglide Door Closers Table of Contents Page Cutaway Illustrations and Features 1 How to Select a Proper Closer 2 ADA Compliance 3 General Information

More information

D-4550 / D-4551 SERIES STANLEY DOOR CLOSERS

D-4550 / D-4551 SERIES STANLEY DOOR CLOSERS D-4550 / D-4551 SERIES STANLEY CLOSERS GENERAL INFORMATION TABLE OF CONTENTS D-4550 / D-4551 Series Page General Information...2, 3 Standard Application...4 Parallel Arm Application...5 Top Jamb Application...6

More information

51 Series Door Closers. An ASSA ABLOY Group brand

51 Series Door Closers. An ASSA ABLOY Group brand 51 Series Door Closers An ASSA ABLOY Group brand Introduction CONTENTS Features & Benefits...3 Overview...4 Fasteners...4 Features...5 Finishes...6 How to Order...7 Applications...8 Technical Details...9-11

More information

4040XPT Series Door controls

4040XPT Series Door controls 4040XPT Series Door controls Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The LCN 4040XPT Series is a non-handed,

More information

Multi-feature closers with compact design, ideal for application on interior doors DOOR CLOSER CATALOG

Multi-feature closers with compact design, ideal for application on interior doors DOOR CLOSER CATALOG Multi-feature closers with compact design, ideal for application on interior doors 1700BC E R I E DOOR CLOER CATALOG 1700BC ERIE LIGHT COMMERCIAL DOOR CLOER INTRODUCTION Norton 1700BC eries Door Closers

More information

5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY

5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY 5700 Series Power Operator Hinge (Pull) Side Mount Installation and Instruction ASSA Manual ABLOY 80-957-000-00 (06-5) Patents 5,88,97; 7,6,096; 7,8, 6 5 0 8 7 9 Item No. Description Back plate Door Closer

More information

4031 Series Door controls

4031 Series Door controls 4031 Series Door controls Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The 4031 Series is a non-handed,

More information

LCN 4310ME SERIES HINGE (PULL) SIDE MOUNTING. The 4310ME SENTRONIC is a. heavy duty, electrically controlled. closer/holder designed to provide

LCN 4310ME SERIES HINGE (PULL) SIDE MOUNTING. The 4310ME SENTRONIC is a. heavy duty, electrically controlled. closer/holder designed to provide HINGE (PULL) SIDE MOUNTING The 4310ME SENTRONIC is a heavy duty, electrically controlled closer/holder designed to provide FEATURES infinitely adjustable hold-open for fire and smoke barrier doors. Door

More information

SURFACE MOUNTED PULL SIDE

SURFACE MOUNTED PULL SIDE AUTOMATIC OPERATORS PRODUCT SELECTION GUIDE LCN automatic operators are the proven standard in schools and health care facilities for over 20 years. They are easily retrofitted into existing doors and

More information

1130 Series Door controls

1130 Series Door controls 1130 Series Door controls Fire Rated: Tested on fire door assemblies in accordance with Australian Standards, refer fire door manufacturer for specific approval details The Briton 1130 Series is a non-handed,

More information

SERIES 1370 DOOR CLOSERS

SERIES 1370 DOOR CLOSERS SERIES 1370 DOOR CLOSERS LCN 1370 Series The LCN Quest 1370 Series is the Fastest Closer Ever Installed. The LCN Quest features a contemporary design with the unique Rapidor mounting bracket, stick-on

More information

1130 Series. Door Closers. SARGENT Manufacturing Company 2004, 2007 All rights reserved

1130 Series. Door Closers. SARGENT Manufacturing Company 2004, 2007 All rights reserved SARGENT Manufacturing Company 2004, 2007 All rights reserved Table of Contents General Information.................................................. 1 Applications........................................................

More information

78-B/F Series. Traditional Door Closers

78-B/F Series. Traditional Door Closers 78-B/F Series Traditional Door Closers introduction The Norton Series 78-B/F Traditional Surface Closers represent a combination of traditional styling and modern closer features. All closer sizes are

More information

Shipped set to size 3. Standard closer offers 3 installation options. - Regular (Pull side) - Top Jamb (Push side) - Parallel Arm (Push side)

Shipped set to size 3. Standard closer offers 3 installation options. - Regular (Pull side) - Top Jamb (Push side) - Parallel Arm (Push side) The Briton is a non-handed, slimline unit designed to be used on commercial interior/exterior wooden and metal doors e.g. storeroom, office and toilet doors. The closer is an adjustable 2-6 strength closer

More information