35 Series Screwdrivers

Transcription

1 Parts Manal EN 35 Series Screwdrivers For additional product information visit our website at

2 823121EN Cleco Description Language Version: This Parts Manual is the Original Instructions intended for all persons who will use or repair these tools. Product Identification: Refer to the Model Nomenclature page in this document. Noise and Vibration: Refer to documents CE-1000DC and CE-1000TD. General Description: Air powered inline and pistol grip screwdrivers equipped with an adjustable clutch. Intended Use: These air assembly tools are intended for tightening of threaded joints or running down fasteners. Use only for their designated purpose. Do not use as a hammer, lever or other improper usage that can cause tool damage and operator injury. Copyright protection: Apex Tool Group, LLC reserves the right to modify, supplement or improve this document or the product without prior notice. This document may not be reproduced in any way, shape or form, in full or parts thereof, or copied to another natural or machine readable language or to a data carrier, whether electronic, mechanical, optical or otherwise without the express permission of Apex Tool Group, LLC. Page 2

3 Cleco Nomenclature EN 35 RS A XX - XX X Tool Series 35 Tool Type RS = Reversible Screwdriver Torque Control Mechanism A = Clecomatic Clutch Handle Type --- = Inline (Push-To-Start) P = Pistol Grip (Push-To-Start) PT = Pistol Grip (Push & Trigger Start) TP = Pistol Grip (Trigger Start) L = Lever (Push-To-Start) Gearing Designation 2 = Triple Geared 5 = Double Geared 7 = Double Geared 10 = Double Geared 20 = Single Geared Output Drive 3 = 3/8" Square Drive Q = Quick Change Chuck Page 3

4 823121EN Cleco Handle Assembly A PT: Push-To-Start Models 35RSA Series Page 4

5 Cleco Handle Assembly EN Illustration "A" Ref Number # X Suspension Bail Inlet Bushing O-Ring PT 1 3 Inlet Screen Valve Spring PT 1 Shut-Off Valve Shut-Off Valve Seal Exhaust Deflector Muffler PT 1 Handle (includes Ref. 12) Retainer Screw Reversing Valve Bushing Reversing Valve Spring Reversing Valve (Locking) PT 1 Reversing Valve (Non-Locking) (#) Quantity (X) Recommended Spare Parts EN Description Page 5

6 823121EN Cleco Handle Assembly B : Reversible Push-To-Start Models 35RSAP Series * * Note: Not included in Handle Assembly. Page 6

7 Cleco Handle Assembly EN Illustration "B" Ref Number # X Reversing Knob Screw Reversing Knob PT 1 Handle Throttle Valve Spring Throttle Valve Throttle Valve Seal O-Ring (0.614" ID) O-Ring (1.176" ID) Reversing Valve * 1 3 O-Ring (1.299" ID) Muffler Muffler Screen Retaining Ring Air Inlet Screen O-Ring (0.676" ID) Air Inlet Bushing PT 1 Throttle Valve Housing (#) Quantity (X) Recommended Spare Parts * Note: Not included in Handle Assembly EN Description Page 7

8 823121EN Cleco Handle Assembly C : Push and Trigger Start : Trigger Start Models 35RSAPT Series 35RSATP Series * * Note: Not included in or Handle Assemblies Page 8

9 Cleco Handle Assembly EN Illustration "C" Ref Number # X Reversing Knob Screw Reversing Knob PT 1 Handle 4 Table "C" 1 3 Shut-Off Valve Spring Shut-Off Valve Shut-Off Valve Seal O-Ring (0.614" ID) PT 1 Valve Housing O-Ring (1.176" ID) Reversing Valve * 1 3 O-Ring (1.299" ID) Trigger Pin Throttle Pin Trigger Assembly Air Inlet Bushing Muffler Muffler Screen Retainer Ring O-Ring (0.676" ID) Throttle Valve Throttle Valve Spring Air Inlet Screen (#) Quantity (X) Recommended Spare Parts * Note: Not included in or Handle Assemblies EN Description Table "C" Ref. Description # 35RSAPT # 35RSATP 4 Shut-Off Valve Spring Page 9

10 823121EN Cleco Handle Assembly D : Reversible Lever Push-To-Start Models 35RSAL Series Page 10

11 Cleco Handle Assembly EN Illustration "D" Ref Number # X Air Inlet Bushing PT 1 3 Air Inlet Screen O-Ring (0.551" ID) PT 1 2 Suspension Bail Air Inlet Spring Exhaust Deflector Throttle Lever PT 1 1 Throttle Lever Pin Muffler PT 1 Reversing Valve Sleeve PT 1 3 Screw Seal PT 1 1 Cap Screw O-Ring (1.614" ID) Roll Pin PT 1 Throttle Valve Valve Seal Valve Spring O-Ring (0.364" ID) Valve Cap Retaining Ring PT 1 Flow Valve O-Ring (0.301" ID) Housing Valve Spring Shut-Off Valve PT 1 Motor Spacer O-Ring (0.864" ID) PT 1 Reversing Valve (#) Quantity (X) Recommended Spare Parts EN Description Page 11

12 823121EN Cleco Motor Assembly E Page 12

13 Cleco Motor Assembly EN Illustration "E" Ref Number # X Rear Bearing 2 Table "E" 1 Rear Bearing Plate Cylinder Pin 4 H Cylinder (includes Ref. 3) Rotor Blade 6 Table "E" 1 Rotor 7 Table "E" 1 Front Bearing Plate Front Bearing Gear Case Spacer 10 Table "E" 1 2 Trip Rod (#) Quantity (X) Recommended Spare Parts Table "E" 35RSA- Series EN Description Ref. Description # 35RSA-2 # 35RSA-5 # 35RSA-7 # 35RSA-10 # 35RSA-20 2 Rear Bearing Plate PT PT PT PT PT 6 Rotor Front Bearing Plate PT PT PT PT PT 10 Trip Rod PT PT PT PT RSAL- Series Ref. Description # 35RSAL-2 # 35RSAL-5 # 35RSAL-7 # 35RSAL-10 # 35RSAL-20 2 Rear Bearing Plate PT PT PT PT PT 6 Rotor Front Bearing Plate PT PT PT PT PT 10 Trip Rod PT PT PT RSAP- Series Ref. Description # 35RSAP-2 # 35RSAP-5 # 35RSAP-7 # 35RSAP-10 # 35RSAP-20 2 Rear Bearing Plate PT PT PT PT PT 6 Rotor Front Bearing Plate Trip Rod PT PT 35RSAPT- Series Ref. Description # 35RSAPT-2 # 35RSAPT-5 # 35RSAPT-7 # 35RSAPT-10 # 35RSAPT-20 2 Rear Bearing Plate PT PT PT PT PT 6 Rotor Front Bearing Plate Trip Rod PT PT 35RSATP- Series Ref. Description # 35RSATP-2 # 35RSATP-5 # 35RSATP-7 # 35RSATP-10 # 35RSATP-20 2 Rear Bearing Plate PT PT PT PT PT 6 Rotor Front Bearing Plate Page 13

14 823121EN Cleco Triple Stage Gearing F : Gear Case Assembly Models 35RSA(--)-2 Series Page 14

15 Cleco Triple Stage Gearing EN Illustration "F" Ref Number # X Retaining Ring Ball Bearing Gear Case Spider PT 3 6 Idler Gear Pin PT 3 6 Idler Gear (15T) PT 3 6 Idler Gear Bushing Spider Idler Gear Pin Idler Gear Bushing Idler Gear (15T) Thrust Race Spider Pinion Gear Pinion Spacer (#) Quantity (X) Recommended Spare Parts (T) Teeth EN Description Page 15

16 823121EN Cleco Double Stage Gearing G PT: Gear Case Assembly (-5 Series) PT: Gear Case Assembly (-7 Series) Models 35RSA Series Page 16

17 Cleco Double Stage Gearing EN Illustration "G" Ref Number # X Retaining Ring Ball Bearing Gear Case Spider PT 3 6 Idler Gear Pin PT 3 6 Idler Gear (15T) PT 3 6 Idler Gear Bushing 8 Table "G" 1 Spider (includes Ref. 9) Idler Gear Pin 10 Table "G" 3 6 Idler Gear (includes Ref. 11) Idler Gear Bearing (#) Quantity (X) Recommended Spare Parts (T) Teeth EN Description Table "G" Ref. Description # 35RSA(--)-5 # 35RSA(--)-7 8 Spider Idler Gear (19T) (17T) (T) Teeth Page 17

18 823121EN Cleco Double Stage Gearing H : Gear Case Assembly (-10 Series) Models 35RSA Series Page 18

19 Cleco Double Stage Gearing EN Illustration "H" Ref Number # X Retaining Ring Ball Bearing Gear Case Spider (includes Ref. 5) Idler Gear Pin PT 3 6 Idler Gear Bushing Idler Gear (15T) Spider (includes Ref. 9) Idler Gear Pin Idler Gear (15T) (includes Ref. 11) Idler Gear Bushing Pinion Gear Pinion Spacer (#) Quantity (X) Recommended Spare Parts (T) Teeth EN Description Page 19

20 823121EN Cleco Single Stage Gearing I : Gear Case Assembly (-20 Series) Models 35RSA Series Page 20

21 Cleco Single Stage Gearing EN Illustration "I" Ref Number # X Retaining Ring Ball Bearing Gear Case Spider (includes Ref. 5) Idler Gear Pin Idler Gear Bearing Idler Gear (18T) (includes Ref. 6) (#) Quantity (X) Recommended Spare Parts (T) Teeth EN Description Page 21

22 823121EN Cleco Clecomatic Clutch Assembly J PT: Q Models (-5, -7, -10 Series) : Q Models (-20 Series) : 3/8 Square Drive Models (-2, -5, -7, -10 Series) Quick Change 8 2 Square Drive * 26* * * Note: 35RSATP Models Only 31 Page 22

23 Cleco Clecomatic Clutch Assembly EN Illustration "J" Ref Number # X EN Description PT 1 Clutch Cam Steel Ball (3/16") PT 1 3 Ball Plug Steel Ball (5/16") PT 1 2 Retaining Ring PT 1 Trip Plunger PT 1 3 Reset Spring Pin PT 1 Clutch Spindle (3/8" Square Drive) Spring Retainer (3/8" Square Drive) Spring (3/8" Square Drive) Socket Lock Pin (3/8" Square Drive) PT 1 Clutch Spindle (Quick Change) Steel Ball (1/8") (Quick Change) PT 1 Ball Retainer PT 1 Release Sleeve PT 1 3 Release Spring 18 Table "J" 1 1 Torque Spring PT 1 Thrust Race Thrust Bearing PT 1 Adjustment Plate PT 1 Adjustment Nut PT 1 Spindle Bushing O-Ring (0.734" ID) (35RSATP Models Only) O-Ring (0.674" ID) (35RSATP Models Only) O-Ring (0.739" ID) (35RSATP Models Only) Clutch Housing (includes Ref. 28) Adjustment Cover PT 1 Release Collar (Quick Change) PT 1 3 Collar Spring (Quick Change) Collar Washer (Quick Change) Retaining Ring (Quick Change) PT * 1 Support Handle Assembly (includes Ref ) * 1 Support Handle Ring Support Handle (#) Quantity (X) Recommended Spare Parts * Note: Not included with Clutch Assembly Table "J" Ref. # Torque Spring Torque Range In. Lbs. Nm. Color PT Green ** Yellow Red ** Note: Standard Equipment Page 23

24 Sales & Service Centers Note: All locations may not service all products. Please contact the nearest Sales & Service Center for the appropriate facility to handle your service requirements. Dallas, TX Detroit, MI Houston, TX Lexington, SC Apex Tool Group Apex Tool Group Apex Tool Group Apex Tool Group Sales & Service Center Sales & Service Center Sales & Service Center 670 Industrial Drive 1470 Post & Paddock 2630 Superior Court 6550 West Sam Houston Lexington, SC Grand Prairie, TX Auburn Hills, MI Parkway North, Suite 200 Tel: Tel: Tel: Houston, TX Tel: Fax: Fax: Tel: Fax: Fax: Los Angeles, CA Seattle, WA York, PA Canada Apex Tool Group Apex Tool Group Apex Tool Group Apex Tool Group Sales & Service Center Sales & Service Center Sales & Service Center Sales & Service Center Blackburn Avenue nd Avenue N.E East Market Street 5925 McLaughlin Road Norwalk, CA Redmond, WA York, PA Mississauga, Ont. L5R 1B8 Tel: Tel: Tel: Canada Fax: Fax: Fax: Tel: Fax: Germany England France China Apex Tool Group Apex Tool Group Apex Tool Group SAS Cooper (China) Co., Ltd. GmbH & Co. OHG GmbH & Co. OHG 25 rue Maurice Chevalier a company of Industriestraße 1 C/O Spline Gauges Ozoir-La-Ferrière Apex Tool Group, LLC Westhausen Piccadilly, Tamworth France 955 Sheng Li Road, Germany Staffordshire B78 2ER Tel: Heqing Pudong, Shanghai Tel: +49 (0) United Kingdom Fax: China Fax: +49 (0) Tel: Tel: Fax: Fax: Mexico Brazil Hungary Cooper Tools Cooper Tools Industrial Ltda. Cooper Tools Hungaria Kft. de México S.A. de C.V. a company of a company of a company of Apex Tool Group, LLC Apex Tool Group, LLC Apex Tool Group, LLC Av. Liberdade, 4055 Berkenyefa sor 7 Vialidad El Pueblito #103 Zona Industrial - Iporanga Pf: 640 Parque Industrial Querétaro Sorocaba 9027 Györ Querétaro, QRO SP Brazil Hungary Mexico Tel: Tel: Tel: +52 (442) Fax: Fax: Fax: +52 (442) Apex Tool Group, LLC 1000 Lufkin Road Apex, NC Phone: Fax: EN/Printed in USA 01/2012/Copyright Apex Tool Group, LLC