GAS TANK ACCESSORIES #CPTD. AGT-BFIK30 30 OHM, kit $ $ $85.00 AGT-BFIK90 90 OHM, kit $ $ $85.00

Transcription

1 GAS TANK ACCESSORIES #COOL #265-33P #265-33BL #265-33AK #265-33PR #265-33RD #CPSF-F #CPSF-C COOL Flush Mount, each $49.00 $43.00 $29.00 CPTD Bed Mount Fuel Filler Trap Door, 5" x 8", ea $27.00 $25.00 $ P Pol. Billet Alum. Flush Mount Fuel Filler, 3", each $69.00 $62.00 $ AK Anodized Billet Alum. - black Flush Mount Fuel Filler, 3", each $69.00 $62.00 $ BL Anodized Billet Alum. - blue Flush Mount Fuel Filler, 3", each $69.00 $62.00 $ RD Anodized Billet Alum. - red Flush Mount Fuel Filler, 3", each $69.00 $62.00 $ PR Anodized Billet Alum. - purple Flush Mount Fuel Filler, 3", ea $69.00 $62.00 $52.00 CPSF-C Weld-in Side Fill Fuel Door - Curved, ea $ $ $94.00 CPSF-F Weld-in Side Fill Fuel Door - Flat, ea $ $ $94.00 POLISHED FUEL DOORS Finish off your bed-standard gas tank with one of our billet aluminum fuel doors. Available in locking and (push/pop) non-locking styles. Hardware included. #CPTD GAS TANK FILLERS Now that your gas tank is out of the cab you are going to need a new fuel filler. We offer everything from a trap door bed filler to weld-in fuel doors to flush mount billet fuel fillers. Flush mount fillers setup to work with 1-1/2" fill hose. PFD round - standard, each $ $95.00 $83.00 PFD-L round - locking, each $ $ $96.00 CPP1656-OGC oval, grooved, chrome, each $79.00 $70.00 $59.00 CPP1656-OGP oval, grooved, polished, each $69.00 $62.00 $49.00 CPP1656-RGC rectangular, grooved, chrome, each $79.00 $70.00 $59.00 CPP1656-RGP rectangular, grooved, polish, each $69.00 $62.00 $49.00 TANK INSTALL KIT Use this kit to install our aluminum bed flush gas tank. Kit includes cap, hose clamps and sending unit. Specify 30 or 90 OHM sending unit. AGT-BFIK30 30 OHM, kit $ $ $85.00 AGT-BFIK90 90 OHM, kit $ $ $85.00 GAS TANK SENDING UNITS For use with our aluminum, stainless, and zinc painted bed mounted relocation gas tanks. VSU ohm, each $49.00 $43.00 $35.00 VSU ohm, each $49.00 $43.00 $35.00 VSU-F ohm, each $49.00 $43.00 $25.00 VSU ohm, each $49.00 $43.00 $25.00 SIDE FILL GAS TANK HOSE & CLAMP KIT Connects your side fill fuel neck to a rear mounted gas tank /2 ID and 4-1/4, 2 ID fuel resistant hoses, adapter and clamps included. Note: Used with our aluminum side fill tanks. CPFFK-S kit $30.00 $26.00 $22.00 BED FILL GAS TANK HOSE & CLAMP KITS Adapts your flush gas filler assembly to your bed fill gas tank with a 4 of 1-1/2 ID fuel resistant hose and aircraft style clamps. Note: Used with our steel and aluminum flush fill tanks. FUEL FILLER BREATHER FILTER A one-piece design featuring a rubber top and vent tube at the base. Comes with air filter oil each $23.00 $23.00 $20.00 CPFFK-B each $15.00 $13.00 $11.00 FUEL TANK SAFETY VALVE VENTS These roll over valves vent and prevent fuel from leaking from your fuel tank in the event that the tank turns over. Note: For use with our aluminum tanks /8"-18 NPT, each $10.00 $9.00 $ /4"-18 NPT, each $10.00 $9.00 $

2 MISCELLANEOUS #CP8854C #CP8503P #CP8503C ECONOMY FLOOR MOUNT THROTTLE PEDAL ASSEMBLIES Equal in design and fit, these highquality imports are an economical option to our premium pedals listed above. Throttle cable is not included. CP8503C "Eliminator" chrome w/ rubber inserts, ea $65.00 $62.00 $59.00 CP8503P "Eliminator" polished w/ rubber inserts, ea $65.00 $62.00 $59.00 CP8602P oval, chrome w/ rubber inserts, each $49.00 $45.00 $35.00 CP8854C-R Chevy fullsize, chrome, billet w/o rubber inserts, each $55.00 $50.00 $44.00 ALUMINUM AUTOMATIC BRAKE PEDAL PAD Choose between three rubber and two rubber inserts. #90197 #CP8602C Polished w/ 3 Rubber Inserts, each $25.00 $18.00 $15.00 CP8501P Chrome w/ 2 Rubber Inserts, each $25.00 $22.00 $15.00 ALUMINUM DIMMER SWITCH PAD Now you have a choice: high quality chrome pad, or economy polished pad. #CP8501P CP8502P Polished w/ 2 Rubber Inserts, each $12.00 $11.00 $9.00 BATTERY DROPOUT BOX Mount your battery on the frame or replace your existing frame mounted battery box with one of our steel battery drop out boxes. We have two styles to choose from: black powdercoated steel or stainless steel construction, both feature a drop out bottom for easy battery maintenance. (L: 10-1/4", W: 6-13/16", H: 8-7/8") #BDB-S24 accepts Optima and group 24 batteries. BDB-S24 Group 24 - stainless steel, each $ $96.00 $69.00 BDB-S24-BK Group 24 - black, each $ $96.00 $69.00 Digital Catalogs Now Available... Get our catalogs at your fingertips! Available for immediate download at classicperform.com. Also available on flashdrive, call for one today. steering, brakes, and suspension specialists

3 THROTTLE CABLES Our throttle cables work with either factory or aftermarket throttle pedals. They are designed with a specially extruded liner for extended life of the cable. They come equipped with aluminum fittings and aluminum ferrule to eliminate fraying. The cable housing is 24" long and can be cut to fit. Cables available with either a black plastic housing or stainless steel braided cable housing. CP8254 Economy, braided stainless steel, 24" length $27.00 $24.00 $23.00 CP8255 Economy, braided stainless steel, 36" length $27.00 $24.00 $23.00 THROTTLE CABLE BRACKET & SPRINGS Our stainless steel cable bracket and dual spring set up are designed to work with throttle cables and kickdown cables. Bracket mounts to virtually any carb and features a teardrop extender for added clearance on some carburetors. CP6055 Economy, stainless steel, kit $15.00 $13.00 $11.00 STAINLESS STEEL KICKDOWN CABLES Kickdown cables feature a cut-to-fit braided stainless steel outer housing and feature aluminum fittings with ferrule to prevent the cable ends from fraying. The cables will work with virtually any manifold. For easy installation, use our stainless steel throttle cable and springs (#SRK-4000). Kit comes complete with detailed instructions. CP2001 Economy, C-4 Transmission, kit $50.00 $45.00 $35.00 CP2003 Economy, TH-350, kit $50.00 $45.00 $35.00 CP2007 Economy, 700R-4, kit $50.00 $45.00 $35.00 CP2009 Economy, Chrysler 904-4, kit $50.00 $45.00 $35.00 CP2004 Economy, TH-350, TPI, kit $50.00 $45.00 $35.00 CP2008 Economy, 700R4, TPI, kit $50.00 $45.00 $35.00 THROTTLE & TRANSMISSION CABLES DIPSTICKS FLEXIBLE TRANSMISSION DIPSTICKS Our flexible transmission dipsticks are the perfect compliment to our engine dipsticks. The dipsticks feature a braided stainless steel outer housing with an easy-to-read teflon inner rod. All applications are for push-in style transmissions. The dipstick seals to the tranny with o-rings. Available for Chevy and Ford transmissions in both firewall mount and transmission mount styles. CP3002 Economy, GM Powerglide Firewall Mount $50.00 $45.00 $38.00 CP3004 Economy, GM TH350/TH400 Firewall Mount $50.00 $45.00 $38.00 CP3008 Economy, GM 700R-4 Firewall Mount $50.00 $45.00 $38.00 CP3001 Economy, Ford C-4 Firewall Mount $50.00 $45.00 $38.00 Need to help a customer? Grab our Brake & Power Steering Installation Guide... Call for a copy today or access it on our website 24 hours a 174

4 TOOLS HEAVY DUTY TUBE BENDER Accepts 3/16, 1/4, 5/16 and 3/8 tubing. Roller action makes brake line bending easy. #CPDFT TBT-HD each $29.00 $26.00 $15.00 #CPFTK 4 IN 1 TUBE BENDER TOOL For the do-it-yourselfer we have a great tubing bender. It bends 3/16, 1/4, 5/16 and 3/8 tubing. TBT degree bends, each $19.00 $17.00 $12.00 TRIPLE TUBE BENDER Our bender accepts 3/8", 5/16" and 1/4" line and is easy to use. It features a side opening so you can slip the tool on tubing at any point. Great for making those tight bends. TBT each $9.00 $8.00 $7.00 TUBE CUTTERS Using a hacksaw is no way to cut brake lines. Do it like a professional with one of our tube cutters. TCB-L cuts 1/8 to 1-1/8 dia. tubing, each $15.00 $13.00 $8.00 TCB-S cuts 1/8 to 5/8 dia. tubing, each $9.00 $8.00 $6.00 DOUBLE FLARE TOOL KITS You can t bend brake lines by hand; you need one of these kits. Part #CPFTK flares 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 and 5/8 brake lines. An adjusting tube cutter is included with part #CPDFT, which flares 3/16, 1/4, 5/16, 3/8, and 1/2 brake lines. Our Elite kit is part #CPDFT-D. It also includes an adjusting tube cutter and flares 3/16, 1/4, 5/16, 3/8, 7/16, and 1/2 brake lines. All kits include a durable plastic storage case. CPFTK Econo, kit $17.00 $15.00 $11.00 CPDFT Deluxe, with tubing cutter, kit $39.00 $34.00 $29.00 CPDFT-D Elite (on the vehicle), kit $69.00 $62.00 $50.00 FLARE WRENCH SET You can t do the job right if you don t have the right tools. That s why you need this quality 5-piece flare wrench set bundled in a sturdy pouch. All popular sizes in one kit. Standard or metric available. #CPDFT-D W350 standard, set $10.00 $9.00 $7.00 TIE ROD & PITMAN ARM PULLER Don t ever bust your knuckles again; Instead, remove pitman arms and tie rod ends the easy way with one of our pullers. STRP small, each $16.00 $14.00 $12.00 LTRP large, each $16.00 $14.00 $12.00 steering, brakes, and suspension specialists

5 TOOLS POWER BRAKE BLEEDER KITS Bleed your brakes like a professional. Includes pump and reservoir, lines, fittings and pressure gauge. PBT 10, kit $75.00 $71.00 $62.00 BRAKE FLUID FILL BOTTLE Filling your brake reservoir can be a messy job. But it doesn t have to be that way. Use this handy Brake Fluid Fill Bottle to make the job easier and cleaner. BFB each $5.00 $4.00 $3.00 MASTER CYLINDER BLEEDER KIT Ensure the best possible braking performance by removing air from your master cylinder before installation. Fits 9/16"-18, 1/2"-20 or 3/8"-24 master cylinders. CPP-BK kit $3.00 $3.00 $2.00 BRAKE BLEEDING SYRINGES Our syringes makes bleeding a snap! Brake fluid and solvent resistant. CP0105 curved tip, each $5.00 $4.00 $3.00 CP0108 straight tip, each $9.00 $8.00 $ IN-1 BALL JOINT SERVICE SET Easily remove and install ball joints. This tool can be used with simple hand tools so no more hassle of finding someone with a hydraulic press. C-frame press also works on universal joints and removes rusted truck brake anchor pins. Comes in a sturdy, red blow molded plastic case. BJT set $79.00 $70.00 $59.00 COIL SPRING COMPRESSORS Change coil springs safely with one of our coil spring compressors. With coil spring compressors the danger of a coil flying out and hurting someone is gone. They also make installation of new coils a snap. CSC each $29.00 $28.00 $25.00 COMBINATION VALVE TOOL For brake systems utilizing CPP's Proportioning Valve, use this tool when bleeding your brakes to lock the valve in place and keep the valve from tripping. Simply remove the warning light switch (white plug) on the valve, then screw in this tool while bleeding your brakes. After the bleeding process is finished replace the warning light switch. Save yourself the headache of having to reset the valve. Works with PV-2, PV-2A, PV-2C, PV-4, PV-4A and PV-4C. PV-TOOL each $10.00 $9.00 $7.00 BRAND NEW! POWER BRAKE BOOSTER INSTALL KITS Get these essential components that make installing your booster/master combination easy. Includes combination valve tool, bleeding syringe, vacuum fitting and hose. PDBI-K25 25" hose, each $27.00 $24.00 $19.00 PDBI-K50 50" hose, each $29.00 $26.00 $