Door/Hardware Index. Page 1 of 1

Transcription

1 Door/Hardware Index Door # HWSet # A A A A A B 11 D1 02 D2 06 EX 13 Project: Palm Beach Gardens Police Station Control #: Print Date: Oct :07PM EDT Company: Allegion Version #: 2 Ver Date: Oct :20PM EDT Page 1 of 1

2 Hardware Group No Exterior-Mechanical Provide each PR door(s) with the following: Qty Description Catalog Number Finish Mfr 6 EA HINGE 5BB1 4.5 X 4.5 NRP 630 IVE 2 EA SURFACE BOLT SB360 12" T 604 IVE 1 EA STOREROOM L9480JD 06A L SCH W/DEADBOLT 1 EA CYLINDER Medico3 High Security 626 MED 2 EA SURFACE CLOSER 4040XP SCUSH 689 LCN 2 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA RAIN DRIP 142AA 76" (1930MM) AA ZER 2 EA MEETING STILE 328AA 84" (2134MM) AA ZER 1 EA GASKETING 8303AA-S 72 X 84" (1829 X 2134MM) AA ZER 1 EA THRESHOLD 566A " (1829MM) A ZER Hurricane code compliant opening. Hardware as scheduled per Schlage Lock NOA # Operational Description Latchbolt retracted by key outside or by lever or knob inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch Self-Closing Hardware Group No Exterior-Rated-Card Reader-Stair Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 3 EA HINGE 5BB1 4.5 X 4.5 NRP 630 IVE 1 EA POWER TRANSFER EPT10 CON 689 VON 1 EA ELEC FIRE EXIT RX-QEL-HH-99-L-F-06-CON 626 VON HARDWARE 1 EA CYLINDER Medico3 High Security 626 MED 1 EA RIM CYLINDER ICX 626 SCH 1 EA SURFACE CLOSER 4040XP REG OR PA AS REQ 689 LCN 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 1 EA RAIN DRIP 142AA 40" (1016MM) AA ZER 1 EA GASKETING 8303AA-S 36 X 84" (914 X 2134MM) AA ZER 1 EA THRESHOLD 566A " (914MM) A ZER 1 EA WIRE HARNESS CON-38 SCH Wire extension from exit device to EPT wire extension 1 EA WIRE HARNESS CON-6W SCH Wiring harness from EPT to tie into wiring coming from power supply. 1 EA MULTITECH READER MT15 BLK SCE To be supplied and installed by security integration division EA POWER SUPPLY PS RS VON

3 Card access system by security supplier. Hurricane code compliant opening. Hardware as scheduled per Schlage Lock NOA # Operational Description Free Egress at all times. Pressing Push Bar retracts latchbolts Self-Closing Utility Threshold,UL,Handicap,Smoke Harness with connectors and pins. Harness with connectors. Door unlocked by valid credential at reader. Hardware Group No Exterior-Electrical Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 3 EA HINGE 5BB1 4.5 X 4.5 NRP 630 IVE 1 EA STOREROOM L9480JD 06A L SCH W/DEADBOLT 1 EA CYLINDER Medico3 High Security 626 MED 1 EA SURFACE CLOSER 4040XP SCUSH 689 LCN 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA RAIN DRIP 142AA 40" (1016MM) AA ZER 1 EA GASKETING 8303AA-S 36 X 84" (914 X 2134MM) AA ZER 1 EA THRESHOLD 566A " (914MM) A ZER Hurricane code compliant opening. Hardware as scheduled per Schlage Lock NOA # Operational Description Latchbolt retracted by key outside or by lever or knob inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch Self-Closing Utility Threshold,UL,Handicap,Smoke Hardware Group No Card Reader-Crime Lab Provide each PR door(s) with the following: Qty Description Catalog Number Finish Mfr 6 EA HINGE 5BB1 4.5 X IVE 1 EA POWER TRANSFER EPT2 CON 689 VON 2 EA MANUAL FLUSH BOLT FB IVE 1 EA EU MORTISE LOCK L9092JDEU 06A RX CON 626 SCH 1 EA CYLINDER Medico3 High Security 626 MED 2 EA SURFACE CLOSER 4040XP REG OR PA AS REQ 689 LCN 2 EA KICK PLATE " X 2" LDW B-CS 630 IVE 2 EA SILENCER SR64 GRY IVE 1 EA WIRE HARNESS CON-38 SCH Wire extension from lock to EPT. 1 EA WIRE HARNESS CON-6W Wire extension from EPT harness to power supply extension; CON-6W SCH

4 1 EA MULTITECH READER MT15 BLK SCE 1 EA POWER SUPPLY PS RS VON Operational Description With Connector. Outside lever electrically unlocked (fail secure) by 12 or 24V DC with Allegion Connect molex 3" lead connector. Outside key allows manual retraction of latchbolt. Inside lever always free for immediate egress. Auxiliary latch deadlocks latchbolt when Self-Closing Harness with connectors and pins. Harness with connectors. Door unlocked by valid credential at reader. Hardware Group No Rated-Stair Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 3 EA HINGE 5BB1 4.5 X 4.5 NRP 652 IVE 1 EA FIRE EXIT HARDWARE 99-L-F VON 1 EA CYLINDER Medico3 High Security 626 MED 1 EA RIM CYLINDER ICX 626 SCH 1 EA SURFACE CLOSER 4040XP EDA 689 LCN 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 1 EA GASKETING 188SBK 17FT PSA BK ZER Operational Description Free Egress at all times. Pressing Push Bar retracts latchbolts Self-Closing Hardware Group No Bullet Proof-Card Reader-Records Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 3 EA HINGE 5BB1 4.5 X 4.5 NRP 652 IVE 1 EA POWER TRANSFER EPT10 CON 689 VON 1 EA EU MORTISE LOCK L9092JDEU 06A RX CON 626 SCH 1 EA CYLINDER Medico3 High Security 626 MED 1 EA SURFACE CLOSER 4040XP EDA 689 LCN 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 3 EA SILENCER SR64 GRY IVE 1 EA WIRE HARNESS CON-50 SCH Wire extension from lock to EPT. 1 EA WIRE HARNESS CON-6W SCH Wiring harness from EPT to tie into wiring coming from power supply. 1 EA MULTITECH READER MT15 BLK SCE To be supplied and installed by security integration division EA POWER SUPPLY PS RS VON

5 Card access system by security supplier. Operational Description Outside lever electrically unlocked (fail secure) by 12 or 24V DC with Allegion Connect molex 3" lead connector. Outside key allows manual retraction of latchbolt. Inside lever always free for immediate egress. Auxiliary latch deadlocks latchbolt when Self-Closing Harness with connectors. Harness with connectors and pins. Door unlocked by valid credential at reader. Hardware Group No Card Reader-Forensics,WKTS.,Det.Workshop,Corridor Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 3 EA HINGE 5BB1 4.5 X IVE 1 EA POWER TRANSFER EPT10 CON 689 VON 1 EA EU MORTISE LOCK L9092JDEU 06A RX CON 626 SCH 1 EA CYLINDER Medico3 High Security 626 MED 1 EA SURFACE CLOSER 4040XP REG OR PA AS REQ 689 LCN 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 3 EA SILENCER SR64 GRY IVE 1 EA WIRE HARNESS CON-50 SCH Wire extension from lock to EPT. 1 EA WIRE HARNESS CON-6W SCH Wire extension from EPT to power supply extension; CON-6W 1 EA MULTITECH READER MT15 BLK SCE 1 EA POWER SUPPLY PS RS VON Operational Description Outside lever electrically unlocked (fail secure) by 12 or 24V DC with Allegion Connect molex 3" lead connector. Outside key allows manual retraction of latchbolt. Inside lever always free for immediate egress. Auxiliary latch deadlocks latchbolt when Self-Closing Harness with connectors. Harness with connectors and pins. Door unlocked by valid credential at reader. Hardware Group No Breakroom,Interview Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 3 EA HINGE 5BB1 4.5 X IVE 1 EA PASSAGE SET L A 626 SCH 1 EA SURFACE CLOSER 4040XP REG OR PA AS REQ 689 LCN 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 3 EA SILENCER SR64 GRY IVE

6 Operational Description Latchbolt retracted by knob/lever from either side at all times. Inside lever is always free for immediate egress. Self-Closing Hardware Group No Office Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 3 EA HINGE 5BB1 4.5 X IVE 1 EA OFFICE W/SIM L9056JD 06A L SCH RETRACT 1 EA CYLINDER Medico3 High Security 626 MED 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 3 EA SILENCER SR64 GRY IVE Operational Description Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by rotating inside thumbturn. Outside knob/lever unlocked by key outside or thumbturn. Rotating inside knob/lever simultaneously retracts latchbolt and Hardware Group No Conference,Meeting,Workspace Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 4 EA HINGE 5BB1 4.5 X IVE 1 EA OFFICE W/SIM L9056JD 06A L SCH RETRACT 1 EA CYLINDER Medico3 High Security 626 MED 1 EA SURFACE CLOSER 4040XP REG OR PA AS REQ 689 LCN 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 3 EA SILENCER SR64 GRY IVE Operational Description Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by rotating inside thumbturn. Outside knob/lever unlocked by key outside or thumbturn. Rotating inside knob/lever simultaneously retracts latchbolt and Self-Closing Hardware Group No Storage,Records,Equipment Room Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 3 EA HINGE 5BB1 4.5 X IVE 1 EA STOREROOM LOCK L9080JD 06A 626 SCH 1 EA CYLINDER Medico3 High Security 626 MED

7 1 EA SURFACE CLOSER 4040XP REG OR PA AS REQ 689 LCN 1 EA KICK PLATE " X 2" LDW B-CS 630 IVE 1 EA WALL STOP WS406/407CCV 630 IVE 3 EA SILENCER SR64 GRY IVE Operational Description Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always inoperative. Auxiliary latch deadlocks latchbolt when door is locked. Inside lever is always free for immediate egress. Self-Closing Hardware Group No Existing Opening-Card Reader Provide each SGL door(s) with the following: Qty Description Catalog Number Finish Mfr 1 EA ELECTRIC STRIKE 6211 FSE 630 VON 1 EA MULTITECH READER MT15 BLK SCE Balance of existing hardware to remain. Operational Description Door unlocked by valid credential at reader.

8 Catalog Cuts for Palm Beach Gardens Police Station Sorted by Manufacturer Prepared By JACK CLEARY, CSI ALLEGION 4724 NE 16TH AVENUE FT. LAUDERDALE FL Phone (954) Fax (866) Created 6/15/2018 PDF created by SpeXtra Page 1

9 Catalog Cut Summary Mfr Description Catalog Number Cut Page Number IVE HINGE 5BB1 4.5 X 4.5 IVE_0250 IVE HINGE 5BB1 4.5 X 4.5 NRP IVE_0250 IVE HINGE 5BB1 4.5 X 4.5 NRP IVE_0250 IVE KICK PLATE " X 2" LDW B-CS IVE_0223 IVE WALL STOP WS406/407CCV IVE_0141 IVE SILENCER SR64 IVE_0148 IVE SURFACE BOLT SB360 12" T IVE_0153 IVE MANUAL FLUSH BOLT FB458 IVE_0097 LCN SURFACE CLOSER 4040XP EDA LCN_4040XP LCN SURFACE CLOSER 4040XP REG OR PA AS LCN_4040XP REQ LCN PA MOUNTING PLATE 4040XP-18PA LCN_0067 LCN SURFACE CLOSER 4040XP SCUSH LCN_4040XP SCE MULTITECH READER MT15 APT_0004~ APT_0005 SCH PASSAGE SET L A SCH_0011 SCH OFFICE W/SIM RETRACT L9056J 06A L SCH_0011 SCH STOREROOM LOCK L9080J 06A SCH_0011 SCH STOREROOM L9480J 06A L SCH_0011 W/DEADBOLT SCH RIM CYLINDER ICX SCH_0121 SCH EU MORTISE LOCK L9092JEU 06A RX CON SCH_0112 VON FIRE EXIT HARDWARE 99-L-F-06 VON_0002~VON_00 21~VON_0112 VON PANIC HARDWARE 9947-NL-OP-110MD VON_0005~VON_01 12 VON POWER SUPPLY PS RS SCE_0087 VON POWER TRANSFER EPT10 CON VON_0201 VON ELEC FIRE EXIT HARDWARE RX-QEL-HH-99-L-F-06- CON VON_0002~VON_00 21~VON_QEL_001~V ON_QEL_SELL_001~V ON_QEL_SELL_002~V ON_0112 VON ELECTRIC STRIKE 6211 FSE VON_0193 ZER THRESHOLD 566A " (914MM) ZER_0095 ZER RAIN DRIP 142AA 76" (1930MM) ZER_0167 ZER MEETING STILE 328AA 84" (2134MM) ZER_0139 ZER THRESHOLD 566A " (1829MM) ZER_0095 ZER GASKETING 8303AA-S 72 X 84" (1829 ZER_0120 X 2134MM) ZER RAIN DRIP 142AA 40" (1016MM) ZER_0167 ZER GASKETING 8303AA-S 36 X 84" (914 X 2134MM) ZER_0120 Project: Palm Beach Gardens Police Station Control #: Print Date: Jun :47AM EDT Company: Allegion Version #: 1 Ver Date: Jun :17AM EDT Page 2 of 3

10 Mfr Description Catalog Number Cut Page Number ZER GASKETING 188SBK 17FT PSA ZER_0114 Project: Palm Beach Gardens Police Station Control #: Print Date: Jun :47AM EDT Company: Allegion Version #: 1 Ver Date: Jun :17AM EDT Page 3 of 3

11 Architectural Hinges 5PB1 5 Knuckle, Plain Bearing Full Mortise Hinge For standard weight doors Low frequency usage Packed with wood and metal screws Not for use with a door closer. A7 Hinges & Pivots Meets ANSI/BHMA A156.1 A8133 Steel A5133 Stainless Steel A2133 Brass Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip RC, Round Corners - 1/4" or 5/8" Radius SEC, Security Fastners - Pin-in-Socket Dimensions Size (Inches) Size (mm) Gauge 3.5 x x x x x x x x x x B Pulls & Plates C Flush Bolts & Coordinators Meets ANSI/BHMA A156.1 A8112 Steel A5112 Stainless Steel A2112 Brass 5BB1 5 Knuckle, Ball Bearing Full Mortise Hinge For standard weight doors Medium frequency usage 2 ball bearing Packed with wood and metal screws Options NRP, Non-Removable Pin SH, Security Stud HT, Hospital Tip RC, Round Corners - 1/4" or 5/8" Radius SEC, Security Fastners - Pin-in-Socket Dimensions Size (Inches) Size (mm) Gauge 3.5 x x x x x x x x Finishes brass Ives Finish US3 US4 US10 US10B US10A US11 US15 US26 US26D BHMA Size (Inches) Size (mm) Gauge 5 x x x x Finishes steel Ives Finish USP US3 US4 US10 US10B US10A US11 US15 US26 US26D BHMA Finishes stainless steel Ives Finish US32 US32D BHMA D Latches, Catches & Bolts E F Stops Exterior Hardware G Miscellaneous Hardware Ives Architectural hardware products A7

12 Protection Plates A Hinges & Pivots B14 Pulls & Plates C Flush Bolts & Coordinators 8400 Series Protection Plates Door protection plates are available in.050 thick brass, stainless steel or aluminum; and 1/8 thick high impact polyethylene in clear or black. Bevel edge options; specify B4E for all four edges. Mounting screw pack furnished standard, 16 screws per pack. Optional screw packs are available for TEK or TORK screw heads. Refer to the following chart for ordering. Specify NMH for no mounting holes. (Not available on 8402) Specify NMH-A for no mounting holes with adhesive. (Not available on 8402) Specify CS for counter sunk mounting holes. Specify ERS prepped with extra row of screws. Kickplate Gasket Tape Tape is recommended when using a brass plate on a metal door to reduce tarnishing from electrolytic oxidation. One tape pack will cover an the perimeters of a 8 x 34 kickplate. Order 8401 Gasket Tape. D Latches, Catches & Bolts E Stops F Exterior Hardware 8400 Protection Plate 8402 (UL)* Protection Plate *UL mark appears in upper right corner. Factory supplied screws must be used. Number of screw packs required by plate size (specify TEK Screws or TORK screws) Finishes brass 24 x 48 max. size US Number US3 US4 US10 US10B US15 US26 US26D BHMA Finishes stainless steel US Number US32 US32D BHMA G Miscellaneous Hardware B14 Ives Architectural hardware products Finishes aluminum US Number US28 BHMA 628 Finishes plastic Clear and Black Residential Grade Kickplates available Carded only, finishes PA28, PA3, PA619, PA716, B3, B505, B619, B716

13 Protection Plates A Hinges & Pivots B18 Pulls & Plates C Flush Bolts & Coordinators D Latches, Catches & Bolts Mop Plates Kick Plates Protect the bottom of the pull side of door subject to cleaning and mopping procedures. Size Ranges:4 to 6 high, 22 to 48 wide Protect the bottom of the push side of doors subject to scuffing from foot traffic. Recommended for all doors subject to normal use (especially doors using a closer). Size Ranges: 8 to 24 high, 22 to 48 wide Stretcher Plates Armor Plates Protect doors at specific areas where consistent contact is made by stretchers, service carts or other equipment. Usually applied to push side of doors. Specify B4E Option for beveled edges. Size Ranges: 6 to 8 high, 22 to 48 wide Protect lower half of doors from abuse by hard carts, trucks and rough usage. Usually applied to push side of single doors and both sides of double acting doors. Size Ranges: 26 to 48 high, 22 to 48 wide G Miscellaneous Hardware F Exterior Hardware E Stops B18 Ives Architectural hardware products

14 Surface Bolts A Hinges & Pivots B Pulls & Plates C Flush Bolts & Coordinators D2 Latches, Catches & Bolts E Stops F Exterior Hardware G Miscellaneous Hardware Meets ANSI/BHMA A UL listed 3 hour fire door, up to 10'0" Miami Dade County NOA Listed Meets ANSI/BHMA A L84161 UL listed 3 hour fire door, up to 10'0" SB360 Surface Bolt Surface Bolt has 1-1/4" throw for maximum security. Jimmy-resistant design, bolt locks automatically when thrown, can be released only be pressing knob toward door while retracting. Ideal for all types of doors. Available in 12" length Unit locks in both the up and down position. Accepts padlock (not furnished) with maximum 3/8" diameter shackle, minimum 1-3/4" shackle opening height. Units packed with one-way screws for added security. Standard screws also supplied. Units packed with both a universal top strike (US) and a mortise bottom strike (MS). Constructed of heavy duty steel. Optional Sex Bolts available. Optional Mortise Strike available. Dimensions Bar: 3/4" Wide x 3/4" Thick Overall Width: 2-1/32" Overall Projection: 2-1/16" Top Strike: 1-1/2" Wide x 1-1/2" Long x 3/16" Thick Optional Mortise Strike: 1-5/8" Wide x 3-1/2" Long x 1/8" Thick Finishes Ives Number US2C BHMA 603 SB453 Surface Bolt Surface Bolt has 1-3/16" throw for maximum security. Strong tension springs prevent creep. Ideal for all types of doors. Available 8" & 12" lengths. Units packed with standard screws for added security. Units packed with both a universal top strike (US) and a mortise bottom strike (MS). Constructed of heavy duty steel. Optional Sex Bolts available. Optional Thru Bolts available. Dimensions Bar: 3/4" Wide x 1/4" Thick Overall Width: 2-1/32" Overall Projection: 1-5/16" Top Strike: 1-1/2" Wide x 1-1/2" Long x 3/16" Thick Bottom Strike: 1-5/8" Wide x 3-1/2" Long x 1/8" Thick Finishes Ives Number US2C US3 US4* US10 US10B US26D BHMA * only available in 8 bolt length. D2 Ives Architectural hardware products

15 Door Silencers Meets ANSI/BHMA , L Meets ANSI/BHMA , L03021 SR64 Dimensions Diameter: 1/2 Thickness: 1/8 Finishes GRY, TAN SR65 Dimensions Height: 3/4 Diameter: 3/8 Thickness: 1/8 Finishes GRY Door Silencer For use on metal frames featuring pneumatic design that, once installed, forms an air pocket to absorb shock and reduce noise of door closing. Tamper-proof once installed on the frame. Proper installation also eliminates door rattle and provides constant tension for door latches or locks. Packed in bags of 100. Grey Available in bulk pack of Each bag has an installation tool included. Door Silencer For use on wood frames, also feature pneumatic design to cushion shock and absorb noise. To prevent removal, a small brad should be driven into stop strip and through stem of silencer, as shown in the detail. Packed in bags of 100. A Hinges & Pivots B Pulls & Plates C Flush Bolts & Coordinators D Latches, Catches & Bolts SR66 Door Silencer Self Adhesive Rubber Silencers. Economical installation requires no drilling of frames. Packed two sheets of 50 (100 minimum). E23 Stops Dimensions Diameter: 1/2 Thickness: 1/8 Finishes BRN, GRY, WHT F Exterior Hardware G Miscellaneous Hardware Ives Architectural hardware products E23

16 Manual Flush Bolts Metal Doors A Hinges & Pivots B Pulls & Plates C10 Flush Bolts & Coordinators D Latches, Catches & Bolts Meets ANSI/BHMA A156.16, L UL Listed 90 Minute Fire Doors 8'0" x 10'0" FB458 Top or Bottom Bolts When the active door is opened, the lever can be moved to the up position, retracting the bolt and allowing the inactive leaf to be opened. When the inactive leaf is closed, the lever can be moved to the down position, projecting the bolt into the strike and securely locking the inactive leaf. Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation. Non-handed. Bolt tip is 1/2" diameter. Bolt throw is 3/4" with a 7/8" vertical adjustment. Bolt backset is 3/4" Standard Rod Length is 12", which is measured from the center of the flush bolt body to the bolt tip. Optional Rod Lengths available - 6", 9", 18" and 24" for fire rated Doors. Optional Rod lengths available - 6", 9", 18", 24", 30", 36" and 48" for non-fire rated doors. DP1 or DP2 optional dust proof strike available, see page C11. Dimensions Body Size: 1" Wide x 6-3/4" Long x 1-1/8" Deep Guide Size: 1" Wide x 2" Long x 5/64" Thick Strike Size: 15/16" Wide x 2-1/4" Long x 5/64" Thick Finishes Ives Number US3 US4 US5 US10 US10B US15 US26 US26D BHMA G Miscellaneous Hardware F Exterior Hardware E Stops C10 Ives Architectural hardware products

17 Wall Bumpers A Hinges & Pivots B Pulls & Plates C Flush Bolts & Coordinators D Latches, Catches & Bolts WS406CVX & WS407CVX Meets ANSI/BHMA L22201 for brass, and L52101 for stainless steel. WS406CCV & WS407CCV Meets ANSI/BHMA L22251 for brass and and L52251 for stainless steel. WS406CVX Wall Bumpers WS406CCV WS407CVX WS407CCV Dimensions Base Diameter: 2-1/2 Base Thickness: 3/8 Overall Projection: 1 Constructed in sturdy yet economical wrought base of brass or stainless steel construction. Feature concealed tamper-proof mounting. Shipped factory preassembled backplate to reduce installation cost. Easy installation by inserting screwdriver through small hole in rubber. WS406CVX (406) convex rubber bumper, packed with wood screw and plastic anchor. WS406CCV (406-1/2) concave rubber bumper, which avoids damage to locks with projecting buttons, packed with wood screw and plastic anchor. WS407CVX (407) convex rubber bumper packed with screw and drywall anchor. WS407CCV (407-1/2) concave rubber bumper which avoids damage to locks with projecting buttons and is packed with screw and drywall anchor. Finishes brass Ives Number US3 US4 US5* US10 US10B US15 US15A** US26 US26D B716** BHMA * E12 Stops Finishes stainless steel Ives Number US32D BHMA 630 * only available on WS407CVX Slim-Pak of 15 ** available on WS407CCV or WS407CVX Slim-Pak of 15 G Miscellaneous Hardware F Exterior Hardware E12 Ives Architectural hardware products

18 CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) 4040XP SERIES The 4040XP is LCN s most durable and flexible heavy duty closer designed for institutional and other demanding high traffic applications. n Cast Iron n Forged Steel Arm n Double Heat Treated Steel Pinion n All Weather Fluid n Non-Handed n LCN Patented Green Dial n Peel-n-Stick Templates for Fast and Accurate Installation n UL & cul Listed n 3/4 Journal Diameter Pinion n Full Compliment Bearing FEATURES *HINGE (pull) side mount shown n Standard 4040XP Series closer shipped with regular arm, standard plastic cover, and self reaming and tapping screws. n Non-sized cylinder is adjustable for interior doors to 5 0 and exterior doors to 4 0. n Closer mounts hinge side, top jamb, and parallel arm on either right or left swinging doors. n Closers to meet ADA requirements. n Standard or optional custom powder coat finish. n Optional plated finish on cover, arm, and fasteners. n Optional SRI primer for installations in corrosive conditions. (Available with powder coat finishes only.) n UL and cul listed for self-closing doors without hold-open. n Tested and certified under ANSI Standard A156.4, grade one. The 4040XP Series includes the LCN "Green Dial" Spring Force Indicator HINGE (PULL) SIDE TOP JAMB (PULL) TOP JAMB (PUSH) MOUNTING PARALLEL ARM STOP FACE POWDER COAT PLATED FINISH PLASTIC METAL COVER NON-HANDED NON-SIZED ACCESSIBILITY CYLINDER DELAYED ACTION**** AVB*** REGULAR (DOUBLE) STANDARD (SINGLE) HOLD-OPEN FUSIBLE LINK **ARM FUNCTION EDA/HEDA CUSH/HCUSH SCUSH/SHCUSH DOUBLE EGRESS AVAILABLE NOT AVAILABLE Closer available with less than 5.0 lbs. opening force on 36 door. ** Maximum opening/hold-open point with standard template. *** Advanced Variable Backcheck. **** Delayed Action Closer incorporates standard 4041 Delay Cylinder. 37 PHONE FAX /14

19 4040XP SERIES MOUNTING DETAILS HINGE (PULL) SIDE MOUNTING MAXIMUM OPENING Templating allows up to 120. Hold-open points 90 up to 120 with hold-open arm. n Butt Hinges should not exceed 5 (127 mm) in width. n Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120. n Reveal should not exceed 3/4 (19 mm) for regular arm or hold-open arm. n Top Rail less than 3-3/4 (95 mm) requires PLATE, 4040XP-18. Plate requires 2 (51 mm) minimum. n Clearance of 2-3/8 (60 mm) behind door required for 90 installation. Options n 4041 Delayed action cylinder*. n Hold-open arm. n Metal cover. n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120 to 70. Delay time adjustable up to approximately 1 minute. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN Product Support for assistance. 38 PHONE FAX /14

20 4040XP SERIES TOP JAMB (PUSH SIDE) MOUNTING MAXIMUM OPENING Templating allows up to 120. Hold-open points 85 up to 120 with hold-open arm. MOUNTING DETAILS n Butt Hinges should not exceed 5 (127 mm) in width. n Auxiliary Stop is recommended at hold-open point or where a door cannot swing beyond 120. n Reveal of 2-9/16 (65 mm) allows 120 opening for REGULAR ARM or standard Hold-open ARM. 4-13/16 (122 mm) allows up to 120 opening with LONG ARM where standard rod and shoe is replaced with optional LONG ROD AND SHOE 4040XP-79LR. Use H-LONG ARM with LONG HEAD AND TUBE, 4040XP-78HL for hold-open. 8 (203 mm) allows up to 120 opening with EXTRA LONG ARM where standard rod and shoe is replaced with optional EXTRA LONG ROD AND SHOE, 4040XP-79ELR. n Top Rail requires 1-1/4 (32 mm) minimum. 2-1/4 (57 mm) minimum with closer on PLATE, 4040XP-18TJ. 3 (76 mm) minimum with closer on PLATE, 4040XP-18G. n Head Frame less than 3-1/2 (89 mm) requires PLATE, 4040XP-18TJ. With flush ceiling, use PLATE, 4040XP-18G. Either plate requires 1-3/4 (44 mm) minimum. n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120 to 70. Delay time adjustable up to approximately 1 minute. Options n 4041 Delayed action cylinder*. n Hold-open arm. n Metal cover. Customized installation templates or products may be available to solve unusual applications. Contact LCN Product Support for assistance. 39 PHONE FAX /14

21 4040XP SERIES MOUNTING DETAILS PARALLEL ARM (PUSH SIDE) MOUNTING Optional mounting requires PA SHOE, 4040XP-62PA for regular or HOLD-OPEN arms. Add prefix "P" to closer description (eg. P4040XP). P4040XP closer includes 4040XP-201 FIFTH HOLE SPACER to support PA SHOE. MAXIMUM OPENING 180 opening/hold-open points with all except CUSH arms. 110 opening/hold-open with CUSH arms. n Butt Hinges should not exceed 5 (127 mm) in width. Options n 4041 Delayed action cylinder*. n Hold-open, EDA, HEDA, CUSH, HCUSH, SPRING CUSH or SPRING HCUSH arm. n Metal cover. Special Templates Customized installation templates or products may be available to solve unusual applications. Contact LCN Product Support for assistance. n Auxiliary Stop is recommended at hold-open point, where the door cannot swing 180, or where CUSH-N-STOP arm is not used. n Clearance for 4040XP-62PA shoe is 4 (102 mm) from door face. EDA shoe projects 5-1/2 (140 mm) from door face. CUSH shoe projects 6 (152 mm) from door face. n Top Rail less than 5-3/8 (137 mm) measured from the stop requires PLATE, 4040XP-18PA. Plate requires 2 (51 mm) minimum from the stop. n Head Frame flush or rabetted requires PA SHOE ADAPTER, 4040XP-419. n Stop Width minimum 1 (25 mm). CUSH arm requires minimum 1-1/2 (38 mm). n Blade Stop clearance requires 1/2 (13mm) BLADE STOP SPACER, 4040XP-61. n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from 120 to 70. Delay time adjustable up to approximately 1 minute. 40 PHONE FAX /14

22 4040XP SERIES EDA MOUNT 4040XP SERIES CUSH MOUNT 4040XP SERIES Mounting details are the same as 4040XP Series REGULAR or HOLD-OPEN except as listed below. 4040XP Series closers ordered with EDA or CUSH arms include 4040XP- 201 FIFTH HOLE SPACER to support the shoe. MAXIMUM OPENING EDA arm can be templated for points at: 110, A = 6-3/8 (162 mm) B = 7-3/4 (197 mm) or 180. A = 2-7/8 (73 mm) B = 4-1/4 (108 mm) Hold-open points up to maximum opening with HEDA arm. CUSH arms can be templated for opening/hold-open point at: 85, A = 7-15/16 (202 mm) B = 9-1/8 (232 mm) 90, A = 7-3/16 (183 mm) B = 8-1/2 (216 mm) 100, A = 6-1/16 (154 mm) B = 7-1/4 (184 mm) or 110. A = 5-1/16 (129 mm) B = 6-3/8 (162 mm) Spring Cush dead stop points are approximately 5 more than templated stop point. Hold open at templated stop points. MOUNTING DETAILS n Clearance for 4040XP-62EDA is 5-1/2 (140 mm) from door face. 6 (152 mm) for CUSH. n Head Frame flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4040XP-419. n CUSH ARM requires SHOE SUPPORT, 4040XP-30 for fifth screw anchorage for narrow frames. n *Delayed Action Incorporates standard 4041 cylinder, without XP cylinder. Delays closing from maximum opening to ; 115 with 180 template, 95 with 110 template, 85 with 100 template, 75 with 90 template. Delay time adjustable up to approximately 1 minute. 41 PHONE FAX /14

23 4040XP SERIES ACCESSORIES CYLINDERS CYLINDER, 4040XP-3071 Heavy duty, non-handed cast iron cylinder assembly. CYLINDER, DEL Cylinder used for delayed action options. COVERS COVER, 4040XP-72 Standard, non-handed plastic cover. METAL COVER, 4040XP-72MC Optional, handed cover. Required for plated finishes and custom powder coat finishes DEL XP MC ARMS REGULAR ARM, 4040XP-3077 Non-handed arm mounts pull side or top jamb with shallow reveal. P4041 closer includes PA SHOE, 4040XP-62PA required for parallel arm mounting. PA SHOE, 4040XP-62PA Required for parallel arm mounting. LONG ARM, 4040XP-3077L Optional non-handed arm includes LONG ROD AND SHOE, 4040XP-79LR for top jamb mount. EXTRA LONG ARM, 4040XP-3077ELR Optional non-handed arm includes EXTRA LONG ROD AND SHOE, 4040XP-79ELR for top jamb mount with deep reveal. HOLD-OPEN ARM, 4040XP-3049 Optional, non-handed arm mounts pull side or top jamb with shallow reveal, hold-open adjustable shoe. 4040XP closer includes 4040XP-62PA shoe required for parallel arm mounting. LONG HOLD-OPEN ARM, 4040XP-3049L Optional non-handed arm includes LONG HEAD AND TUBE, 4040XP-3048L for top jamb mount. EXTRA DUTY ARM, 4040XP-3077EDA Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. HOLD-OPEN EXTRA DUTY ARM, 4040XP-3049EDA Handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. Hold-open function is adjusted at the shoe. EXTRA DUTY ARM WITH 62G, 4040XP-3077EDA/62G Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. 62G shoe provides additional blade stop clearance. HOLD-OPEN EXTRA DUTY ARM WITH 62G, 4040XP-3049EDA/62G Handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. 62G shoe provides additional blade stop clearance. Hold-open function is adjusted at the shoe. 79LR 79ELR 3048L EDA 3077EDA 3049EDA/62G 3077EDA/62G 62PA PHONE FAX /14

24 ARMS CONT. CUSH-N-STOP ARM, 4040XP-3077CNS Optional, non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe. HCUSH ARM, 4040XP-3049CNS Provides hold-open function with templated stop/hold-open points. Handle controls hold-open function. 4040XP SERIES 3077CNS 3049CNS ACCESSORIES SPRING CUSH ARM, 4040XP-3077SCNS Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. 3077SCNS SPRING HCUSH ARM, 4040XP-3049SCNS Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function. 3049SCNS INSTALLATION ACCESSORIES PLATE, 4040XP-18 Required for hinge side mount where top rail is less than 3-3/4 (95 mm). Plate requires minimum 2 (51 mm) minimum top rail. 18 PLATE, 4040XP-18G Locates top jamb mounted closer flush with top of head frame face in flush ceiling condition. Plate requires 1-3/4 (44 mm) minimum head frame. PLATE, 4040XP-18TJ Centers top jamb mounted closer vertically on head frame where face is less than 3-1/2 (89 mm). Plate requires 1-3/4 (44 mm) minimum head frame. PLATE, 4040XP-18PA Required for parallel arm mounting where top rail is less than 5-1/2 (140 mm), measured from the stop. Plate requires 2 (51 mm) minimum top rail. 18G 18PA 18TJ 43 PHONE FAX /14

25 4040XP SERIES ACCESSORIES INSTALLATION ACCESSORIES CONT. CUSH SHOE SUPPORT, 4040XP-30 Provides anchorage for fifth screw used with CUSH arms, where reveal is less than 3-1/16 (78 mm). BLADE STOP SPACER, 4040XP-61 Required to lower parallel arm shoe to clear 1/2 (13 mm) blade stop. PA FLUSH PANEL ADAPTER, 4040XP-419 Provides horizontal mounting surface for parallel arm shoe on single rabetted or flush frame AUXILIARY SHOE, 4040XP-62A Requires a top rail of 7 (178 mm). Optional shoe replaces -62PA for parallel arm mounting of regular arm with overhead holder/stop. 62A 44 PHONE FAX /14

26 TABLE OF SIZES 4040XP cylinders are adjustable from size 1 through size 6 and is shipped set to size 3. Closing power of 4040XP Series closers may be adjusted 50%. EXTERIOR (and VESTIBULE) DOOR WIDTH 24" 30" 36" 42" 48" 610mm 762mm 914mm 1067mm 1219mm size 3 size 4 size 5 size 6 *4040XP Minimum Door Width INTERIOR DOOR WIDTH 24" 34" 38" 48" 54" 60" 610mm 864mm 965mm 1219mm 1372mm 1524mm size 2 size 3 size 4 size 5 size 6 *4040XP Minimum Door Width * Adjustable Size 1 thru 6. Indicates recommended range of door width for closer size. REDUCED OPENING FORCE 4040XP SERIES CLOSERS CAUTION! Any manual door closer, including those certified by BHMA to conform to ANSI Standard A156.4, that is selected, installed and adjusted based on ADA or other reduced opening force requirements may not provide sufficient power to reliably close and latch a door. Refer to POWER OPERATORS section for information on systems that meet reduced opening force requirements without effecting closing power. * Maximum opening force. DOOR WIDTH 36" 42" 48" 8.5* lbs. 4040XP 4040XP 4040XP 5.0* lbs. 4040XP 4040XP 4040XP XP SERIES HOW-TO-ORDER 4040XP SERIES CLOSERS 1. SELECT FINISH Standard Powder Coat Aluminum, Dark Bronze, Statuary, Light Bronze, Black, Brass. Closer will be shipped with: - STANDARD CLIP-ON COVER - SPECIFY ARM WHEN ORDERING - SELF-REAMING and TAPPING SCREWS, unless options listed below are selected. CLOSER OPTIONS CYLINDER Delayed Action (4041 DEL) COVER Metal (specify right or left hand) (MC) FINISH Custom Powder Coat (RAL) (handed metal cover required) Plated Finish, US (handed metal cover required) SRI primer (use with powder coat finishes only) ARM Regular (REG) Regular w/62pa (Rw/PA) Regular w/62a (R/62A) Long (LONG) Extra Long (XLONG) Hold-Open (H) Hold-Open w/62pa (Hw/PA) Long Hold-Open (HLONG) Extra Duty Arm (EDA) Extra Duty Arm with 62G (EDA/62G) Hold Open Extra Duty Arm (HEDA) (Handed) Hold Open Extra Duty Arm with 62(HEDA/62G)(Handed) Cush-N-Stop (CUSH) HCush-N-Stop (HCUSH) Spring Cush (SCUSH) Spring HCush (SHCUSH) OPTIONAL SCREW PACKS TB* w/self-reaming and Tapping (TBSRT) Wood & Machine Screw (WMS) TB*, Wood & Machine Screw (TBWMS) TORX Machine Screw (TORX) TB* & TORX Machine Screw (TBTRX) * Specify door thickness if other than 1-3/4. INSTALLATION ACCESSORIES Plate, 4040XP-18 Plate, 4040XP-18TJ Plate, 4040XP-18G Plate, 4040XP-18PA CUSH Shoe Support, 4040XP-30 Blade Stop Spacer, 4040XP-61 Auxiliary Shoe, 4040XP-62A PA Flush Panel Adapter, 4040XP-419 SPECIAL TEMPLATE ST- PHONE FAX /14 ORDERING INFORMATION

27 4040XP Series Accessories Cylinders Covers 4040XP-3071 Cast Iron Cylinder Assembly DEL Cast Iron Cylinder Assembly 4040XP-72 Plastic Cover 4040XP-72MC Metal Cover n Non-handed n Heavy duty n Used for delayed action closing n Non-handed n Includes 4040XP-54 snap-on cover clip n Non-handed n Handed n Required for plated finishes and custom powder coat finishes n Heavy duty n Standard n Optional Installation Accessories 4040XP-18 Plate 4040XP-18G Plate 4040XP-18TJ Plate 4040XP-18PA Plate n Required for hinge side mount where top rail is less than 3-3/4 (95 mm) n Requires minimum 2 (51 mm) minimum top rail n Locates top jamb mounted closer flush with top of head frame face in flush ceiling condition n Requires 1-3/4 (44 mm) minimum head frame n Centers top jamb mounted closer vertically on head frame where face is less than 3-1/2 (89 mm). Plate requires 1-3/4 (44 mm) minimum head frame n Required for parallel arm mounting where top rail is less than 5-1/2 (140 mm), measured from the stop n Requires 2 (51 mm) minimum top rail 4040XP-62PA PA Shoe n Required for parallel arm mounting 42 LCN Door Control Catalog phone: n fax: n n rev. 5/16

28 aptiq TM Multi-technology readers Overview Features and benefits aptiq TM multi-technology readers by Allegion are designed to simplify your access control solutions. Transition your system from proximity to smart card technology at your own pace without having to change out readers as new technologies are available. aptiq readers handle all applicable ISO standards (14443A, 14443B, 15693), are FIPS compliant and are versatile enough to read 125kHz proximity and 13.56MHz contactless smart cards in a single unit. aptiq multi-technology readers interface with aptiq smart credentials (MIFARE classic and MIFARE DESFire TM EV1) and can read the card serial numbers of a variety of smart cards from other manufacturers, making your next upgrade in technology simple and seamless. Additionally, aptiq readers are already NFC compatible and able to communicate with NFC-enabled phones whenever you re ready to take that step. aptiq multi-technology readers use an open architecture platform designed to work with industry standards and common access control system interfaces. Multiple aptiq reader form factors are designed to fit a variety of placement needs, with an attractive modern design which will complement any facility s architecture and décor. aptiq readers are very easy to install with the quick-connect design and a standard wiring color scheme that most technicians are already accustomed to. But if you do have questions, you ll never worry about lack of service or assistance. As always, our knowledgeable sales and support staff is ready to assist you with any design or technology questions you may have. Accommodates interior, exterior, metal, and non-metal installation environments Recognizes most proximity credentials, and aptiq smart credentials (MIFARE classic and MIFARE DESFire TM EV1) FIPS compliant NFC compatible, reads aptiqmobile TM credentials Quick-connect design for easy installation Simple wiring color scheme is identical to most readers in the market Easy-to-install mounting bracket Tri-state LED (red, green, amber) visual indicator and audio feedback representing status and activity information, easily discernible for the audibly or visually impaired Wiegand output for simple interface with most access control panels Multiple reader cover color options Note: Magnetic stripe multi-technology readers also available. Allegion, the Allegion logo, Schlage, aptiq, the aptiq logo, aptiqmobile and XceedID, are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners. Limited lifetime warranty Multi-technology readers may also be ordered with RS-485 capability

29 Model * PR10 SM10 MT11 MT15 MTK15 Reader type Proximity mini-mullion * Smart mini-mullion * Multi-technology mullion Multi-technology single gang Multi-technology single gang keypad Frequency 125 khz MHz MHz and 125 khz FIPS compliant No Yes Standard default PIV output N/A 75 bit PIV ** Standards N/A ISO 14443A, 14443B, Certifications FCC Certification IC Certification UL 294 Listed R&TTE Directive (15 EU Countries) CE Mark IP65 Voltage range 5-16 VDC Power supply Linear DC Current requirement (at 12 VDC and 25 C; mamps) Read range Avg. 65 ma Peak 110 ma Proximity: Up to 3" (7.5 cm) Avg. 95 ma Peak 195 ma MIFARE: Up to 3" (7.5 cm) DESFire EV1: Up to 2" (5.1 cm) MT11 Avg. 100 ma Peak 170 ma Proximity: Up to 5" (12.7 cm) MIFARE: Up to 4" (10 cm) MT Avg. 115 ma Peak 145 ma MT15 & MT Avg. 120 ma Peak 200 ma Proximity: Up to 5" (12.7 cm) MIFARE: Up to 4" (10 cm) MTK15 and MTK Avg. 120 ma Peak 230 ma DESFire EV1: Up to 2" (5.1 cm) PIV credential: Up to 2.5" (6.5 cm) Cable specification 18 AWG, 5 conductor stranded/shielded System interfaces Wiegand Wiegand / Clock & Data Wiegand / Clock & Data / RS-485 *** (OSDP) Cabling distance Wiegand output: 500 ft. (152 m) Physical dimensions 4.26" x 1.72" x 0.81" 4.26" x 1.72" x 0.81" 5.91" x 1.72" x 0.81" 5.1" x 3.25" x 0.76" 5.1" x 3.25" x 0.76" (H x W x D) 10.8 cm x 4.4 cm x 2.1 cm 10.8 cm x 4.4 cm x 2.1 cm 15 cm x 4.4 cm x 2.1 cm 12.9 cm x 8.3 cm x 1.9 cm 12.9 cm x 8.3 cm x 1.9 cm Operating temperatures -40 to 158 F (-40 to 70 C) Weight 4.1 oz 3.9 oz 5.7 oz 9.1 oz 9.3 oz Material PBT Polymer Technologies supported in default mode Schlage Proximity XceedID TM Proximity HID Proximity GE/CASI ProxLite AWID Proximity LenelProx aptiqmobile Schlage MIFARE XceedID MIFARE aptiq smart cards using MIFARE aptiq smart cards using MIFARE DESFire EV1 DESFire CSN HID iclass CSN Inside Contactless PicoTag CSN ST Microelectronics CSN Texas Instruments Tag-It CSN Phillips I-Code CSN Color options Black (standard) Cream Cool tone gray Warm tone brown * Some features and benefits listed on the front may not be applicable to the smart-only and proximity-only readers. ** Other output options available through configuration. *** RS-485 model numbers include -485 after the original model number. For example, MT is the RS-485 version of the multi-technology mini-mullion reader. Multi-drop, Open Standard Device Protocol (OSDP). About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises 27 global brands, including strategic brands CISA, Interflex, LCN, Schlage and Von Duprin. For more, visit Allegion , Rev. 08/14

30 Cores Full size interchangeable core cylinders for exit devices, aluminum door, etc. Interchangeable core rim cylinders for exit devices Number Core mechanism Conventional core Primus core XP Primus XP core Housing only, less core Available in 605, 606, 609, 612, 613, 619, 625, 626, and 643e finish. Cylinders for Adams Rite MS and 4700 Series Lori 4500 Series and Corbin Russwin DL3000 Series Number Core mechanism Collar Conventional core Compression ring & spring Conventional core 3 16" + 3 8" blocking rings Primus core 3 16" + 3 8" blocking rings XP Primus XP core 3 16" + 3 8" blocking rings Housing less core None These cylinders include set screw pack B for Adams Rite locks. K Adams Rite MS cam Cylinders for Adams Rite 4070 Series deadlocks Number Core mechanism Collar Conventional core 3 16" + 3 8" blocking rings Primus core 3 16" + 3 8" blocking rings XP Primus XP core 3 16" + 3 8" blocking rings Housing less core None B Adams Rite 4070 cam Notes 1. Mortise cylinders available 605, 606, 609, 612, 613, 619, 625, 626, and 643e finish. Cores furnished 606 and 626 only. 2. To differentiate between Classic and Everest 29, specify keyway. Example: C or CP (Classic), S123 (Everest 29). 3. All cylinders are 1 1 2" long. 4. Specify LKB if 0-bitted Primus XP cylinders are required less key blanks. 34 Schlage Key systems, cylinders and keys reference guide

31 L Series Nothing is tougher At Schlage we know that every product you specify has to stand up to constant use and abuse. Your building s locking systems face an additional challenge keeping people and other assets safe while delivering constant, reliable performance. Schlage L Series Extra Heavy Duty Mortise Locks are built to withstand the rigors of daily use without fail. We don t compromise on security The safety and security of your clients buildings is something we take very seriously. That s why every Schlage lock and deadbolt undergoes intensive testing to determine its ANSI grade level: Cycle tests Door impact tests Resistance tests Warped door tests Bolt strength tests We pay attention to these details so you can focus on creating a functional and aesthetically pleasing environment for your clients. In fact, every one of our L Series locks meets ANSI Grade 1 standards for safety. Schlage L Series 7

32 Vandlgard The L Series Vandlgard is ideal for areas subject to abuse or anywhere vandalism is likely to be present. Vandlgard prevents damage to internal lock components caused by excessive force from kicking, hitting or standing on the lever to gain access. It s easy to retrofit standard L Series locks with Vandlgard using the Vandlgard Retrofit Kit and an instructional DVD that shows installation on existing hardware. 8 Schlage L Series

33 The right lock for every application Schlage L9000 Series Our L9000 Series locks are ideal for use in schools, hospitals and factories, where the finest hardware must also deliver consistent, dependable operation 4 1 and stand up to constant use and abuse. 5 2 Strength and durability 3 1. Fully wrapped heavy-gauge steel case protects against door edge attacks 2. All-metal zinc dichromate-plated working parts 3. Inside lock case protects electronic components 4. Two-piece anti-friction tongue reduces wear and tear 5. Outside and inside trim thru-bolted together and through the door 6 Security built in 6. Break-away spindle prevents unsecured failures and provides easy spindle replacement 7. Hub blocking plate protects lock against spindle manipulation 8. Spring-loaded fusible link provides fail secure mode in case of fire 9. Inside lever applied by screwless shank mounting no exposed trim mount screws Adaptable to your application 10. Universal lock case ten functions in one case 11. Floating mounting tabs automatically adjust to fit a beveled door edge 12. Field-reversible handing without opening lock case 13. External spring cages allow for simple trim retrofit 14. Locking thumbturn on the inside of door visually shows when the door is locked and unlocked 15. Lever rotation in both directions (up and down) for ease of use 16. Independent lever rotation Schlage L400 Series Our L400 Series locks are designed for use as primary locks where no latching is required, such as restrooms and small doors to utility spaces. They also offer optimum security when used as auxiliary locks in other applications. 1. High-strength steel alloy cylinder retainer 2. Armored front in brass, bronze or stainless steel; adjustable for door bevel 3. 1" (25 mm) stainless steel throw deadbolt 4. Deeper retainer groove in cylinder shell increases security against wrenching and pullout; all cylinders backward compatible 5. 6-pin Everest cylinder with patented keys standard 6. Steel case and parts are corrosion resistant Schlage L Series 9

34 The M Collection A range of options. A single standard of quality. Introducing the M Collection, an entire lineup of decorative levers designed to maintain a custom high-style look on doors throughout any building from the main entrance to the supply closet. The ability to suite M Collection levers across multiple platforms from Schlage and Von Duprin means consistent style and functionality along with unrivaled security. The M Collection was designed to function as a visual extension of any interior, from contemporary to classic. M51 M52 M53 2.4" 2.2" 2.6" 4.5" " 3.2" 3" 3.2" M56 M57 M61 2.1" 2.15" 2.1" 4.6" 4.5" 4.5" 3" 2.9" 3.2" M81 M82 M83 0.4" 0.4" 0.4" 4.8" 4.8" 4.6" 2.9" 2.9" 2.9" 10 Schlage L Series

35 Finish options All lever designs shown (M Collection and Standard) can be paired with any of the following commercial graded products for suiting across an office, a floor or an entire building. Color Bright brass Satin brass Antique brass Satin nickel Bright chrome Satin chrome Bright stainless steel Satin stainless steel Aged bronze Locks ANSI/BHMA number /626AM /630AM 643 US number US3 US4 US5 US15 US26 US26D US32 US32D US11 AM = Antimicrobial. See pricebook for additional trim and finish availability. 33A, 95 & 99 devices not available in 619 & 630 finishes. M54 M55 Schlage L Series mortise locks Grade 1 Schlage L Series locks have long been the industry standard for mortise locks, with a comprehensive offering of functions and options to support any opening need. 2.14" 2.14" Schlage LT Series tubular locks Grade " 4.35" 3" 4.3" The perfect compliment to the Schlage L Series or the Von Duprin exit devices, the LT Series tubular chassis is based on venerable L Series mortise lock and provides an alternative to lever suiting for interior doors. Exit devices M62 M63 Von Duprin 98/99 exit devices Grade 1 1.9" 2.7" 4.5" 2.1" 3.2" 4.5" Von Duprin created the first exit device in 1908, and continues to redefine the industry today with unsurpassed quality and industry-unique features such as concealed vertical cables. The 98/99 Series exit device is intended for standard-stile doors. For use with 996L trim only. M84 M85 Von Duprin 33A/35A exit devices Grade 1 0.4" 0.3" Offering the same innovate features as the 98/99 Series, the 33A/35A Series of exit devices is intended for narrowstile doors. For use with 360L trim only. 5.1" 4.9" 3" Images shown with Schlage L Mortise A rose; additional rose and escutcheon designs available. 3.3" Von Duprin 94/95 exit devices Grade 1 The 94/95 has the pushbar trim recessed into the door to minimize the external profile, allowing more room for people and equipment to pass through. For use with 940L trim only. Schlage L Series 11

36 The Standard Collection Built on our tradition of raising industry standards. Like the M Collection, these lever designs suite with exit devices and locks from our trusted Schlage and Von Duprin brands. And, they are built to the same exacting standards. Our Standard Collection levers offer a more traditional style that is appropriate for use in a number of commercial applications " 1.813".5" 3.875" 4.75" 4.75" 2.688" 2.813" 2.813" " 2.031" 4.625".5" 4.75" 4.875" 3.063" 3" 2.688" Longitude Merano Omega.5" 2".375" 4.875" 4" 5.063" 2.563" 3.125" 3.313" 12 Schlage L Series

37 Finish options Color Bright brass Satin brass Antique brass Satin bronze Oil rubbed Bronze Satin nickel Bright chrome Satin chrome Bright stainless steel Satin stainless steel Aged bronze ANSI/BHMA number /626AM /630AM 643 US number US3 US4 US5 US10 US10B US15 US26 US26D US32 US32D US11 AM = Antimicrobial. See pricebook for additional trim and finish availability. 33A, 95 & 99 devices not available in 619 & 630 finishes ".5" 1.969" 3.75" 4.625" 4.625" 2.875" 2.5" 2.875" Accent Asti Latitude 2" 2" 4.125" 4" 4.75" 3.125" 2.625" 2.563" St Annes 2" 4.313" 3.125" To learn more about suiting of Schlage and Von Duprin products with our decorative or standard levers contact your security consultant or visit allegion.com/us. Schlage L Series 13

38 Escutcheons and roses Choose from three types of escutcheon and two rose sizes to add tough, durable performance to your lockset. Escutcheons Roses L Full face Specify by adding L after lever design. Material: Cold-forged brass, bronze or stainless steel Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e Size: 8" x 1 3 4" x 7 16" (203 mm x 44 mm x 11 mm) 8" 203mm A Wrought rose 2 1 8" (54 mm) diameter Available for use on L Series knob and lever designs. Specify by adding A after lever design Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e L Concealed Specify by adding C suffix to function and by adding L after lever design. Material: Cold-forged brass, bronze or stainless steel Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e Size: 8" x 1 3 4" x 7 16" (203 mm x 44 mm x 11 mm) 8" 203mm B Wrought rose " (65 mm) diameter Available for use on L Series knob and lever designs. Specify by adding B after lever design. Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e N Escutcheon Specify by adding N after lever design. Material: Heavy wrought reinforced brass, bronze or stainless steel Finishes: 605, 606, 609, 612, 613, 619, 625, 626, 629, 630, 643e Size: 8" x " x 7 16" (203 mm x 65 mm x 11 mm) 8" 203mm C Wrought rose 2 5 8" (66 mm) diameter Available for use on L Series knob and lever designs. Specify by adding C after lever design. Finishes: 605, 606, 609, 619, 625, 626, 629, 630, 643e 14 Schlage L Series

39 Thumbturns Choose from three variations of thumbturn locks that help you meet the demands of specialized commercial projects. Hotel occupancy indicator For lock function L9486P, this unit can be used with A or B roses. Requires a 1 3 8" (35 mm) cylinder for 1 3 4" (44 mm) doors. Specify finish when ordering separately. Optional EZ turn L Available for rose and escutcheon trim. Disability turn (ADA) option to standard thumbturn. Can be used with thumbturn-function L Series lock except L9463 and L463. Specify lock per L when ordering. Coin turn For lock function L9044 and L9444 with rose trim. Specify and finish per L when ordering. Tactile warning (knurling) Schlage L Series commercial levers feature knurling only on the outside lever unless otherwise specified. 03 Lever shown This feature is available on the following lever models: 01, 02, 03, 05, 06, 07, 12, 17, 18, 41, 42 and 93. Products featuring a knurled surface will be indicated by adding the prefix 8 to the lever number. For example, L9050P 803A/03A. Schlage L Series 15

40 Lock functions Lock components Symbol key Deadbolt Cylinder Coin turn Stopworks functions by turn-piece Auxiliary guarded latch Latchbolt with anti-friction tongue Outside knob or lever Inside knob or lever Thumbturn Solid spindle Two-piece spindle Emergency turn piece Thumbturn cylinder Occupancy indicator Product identification guide L/LV P Lock series L = standard LV = vandlgard 0 = dummy trim without lock case 9 = functions with lock case 0 = no deadbolt 1 = dummy trim 4 = with deadbolt Function Cylinder suffix P = 6-pin full-face mortise cylinder with Schlage logo * L = less full-face cylinder C = concealed mortise cylinder W = less concealed cylinder R = full-size interchangeable core with Schlage logo J = less full-size interchangeable core F = full-size interchangeable core less Schlage logo T = full-size construction core BD = SFIC less core BDC = disposable SFIC GD = Everest patented SFIC HD = construction SFIC SFIC = Small Format (Best style) Interchangeable Core To order less Schlage logo, specify lock with K faceplate. LV = Vandlgard function allows exterior lever to rotate freely down while remaining securely locked. 16 Schlage L Series

41 Lock functions ANSI A156.13, Series 1000 Schlage L9010 Passage latch ANSI FO1 Latchbolt retracted by knob/lever from either side at all times. Inside lever is always free for immediate egress. L9040 F22 LV9040 Bath/bedroom privacy lock Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn. Turning inside knob/lever or closing door unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn (furnished) in access hole and rotate. Inside lever is always free for immediate egress. L9044 LV9044 Privacy with coin turn outside Latchbolt retracted by knob/lever from either side unless outside is locked by inside thumbturn or outside coin turn. Operating inside knob/lever, closing door, rotating inside thumbturn or rotating outside cointurn unlocks outside knob/lever. Specify per L for Torx screws. Available with rose trim only. (Previously XL11-868) L9440 LV9440 F19 Privacy with deadbolt Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. To unlock from outside remove emergency button, insert emergency thumbturn in access hole and rotate. Inside liner is always free for immediate egress. (Previously XL ) Schlage ANSI L9444 LV9444 Privacy with deadbolt and coin turn outside Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by inside thumbturn or outside coin turn. Throwing deadbolt locks outside knob/lever. Rotating inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Rotating outside coin turn retracts deadbolt and unlocks outside knob/lever. Specify per L for Torx screws. Available with rose trim only. Inside lever is always free for immediate egress. (Previously XL11-868) L0170 Half dummy trim Knob/lever on one side fixed by mounting bar. L0172 Full dummy trim Knob/lever on both sides fixed by mounting bar. L9175 Half dummy trim with lock case Fixed knob/lever on one side inoperable. Includes lock case and armored front. Options same as L9176 below. L9176 Full dummy trim with lock case * Fixed knob/lever on both sides. Includes lock case and blank armor front. May be ordered with optional XL armored front with cutout to receive deadbolt. * In a double-door application where the dummy will be used as the strike order Armored Front Strike separately. Schlage L Series 17

42 Lock functions Single cylinder non-deadbolt functions Schlage ANSI L9050 F04 LV9050 Office and inner entry lock Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by turning inside thumbturn. When outside is locked, latchbolt is retracted by key outside or by knob/lever inside. Outside knob/lever remains locked until thumbturn is returned to vertical or unlocked by key. Auxiliary latch deadlocks latchbolt when door is closed. Inside liner is always free for immediate egress. Schlage ANSI L9080EL LV9080EL Electrically locked (fail safe) Outside knob/lever continuously locked by 24V AC or DC. Latchbolt retracted by key outside or by knob/lever inside. Switch or power failure allows outside knob/ lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside knob/lever always free for immediate exit. Inside lever is always free for immediate egress. L9056 LV9056 L9050 with automatic unlocking Latchbolt retracted by knob/lever from either side unless outside is made inoperative by key outside or by rotating inside thumbturn. Outside knob/lever unlocked by key outside, thumbturn or closing door. Rotating inside knob/ lever simultaneously retracts latchbolt and unlocks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9070 F05 LV9070 Classroom lock Latchbolt retracted by knob/lever from either side unless outside is locked by key. Unlocked from outside by key. Inside knob/lever always free for immediate exit. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9080EU LV9080EU Electrically unlocked (fail secure) Outside knob/lever unlocked by 24V AC or DC. Latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9080EL-RX / LV9080EL-RX L9080EU-RX / LV9080EU-RX Request to exit (RX) electrified lock Same as L9080EL and L9080EU functions. In addition, a micro-switch positioned inside the lock case monitors the retractor crank, and is actuated when rotation of the inside or outside knob/levers rotates the retractor hub. The switch signals the use of that opening to security systems, allowing a non-disruptive means of immediate egress. Specify per L with L functions, specify L with LV functions. Inside lever is always free for immediate egress. L9076 F06 LV9076 Classroom holdback lock Latchbolt retracted by knob/lever from either side unless outside is locked by key. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Depress inside knob/lever and turn key 360 for holdback feature. Inside lever is always free for immediate egress. L9080 F07 LV9080 Storeroom lock Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever is always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. 18 Schlage L Series

43 Lock functions Single cylinder deadbolt functions Schlage ANSI Schlage ANSI L9453 LV9453 Entrance lock F20 L9485 LV9485 Faculty/hotel/restroom lock Latchbolt retracted by knob/lever from either side unless outside is locked by 20 rotation of thumbturn. Deadbolt thrown or retracted by 90 rotation of thumbturn. When locked, key outside or knob/lever inside retracts deadbolt and latchbolt simultaneously. Outside knob/lever remains locked until thumbturn is restored to vertical position. Throwing deadbolt automatically locks outside knob/lever. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown all keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9456 LV9456 Corridor lock F13 Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or inside thumbturn. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt and unlocks outside knob/lever. Inside lever is always free for immediate egress. L9465 Closet/storeroom lock Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside. L9473 F21 Dormitory/bedroom lock Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key outside or thumbturn inside. L9480 LV9480 Storeroom lock with deadbolt Latchbolt retracted by key outside or by lever or knob inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. (Previously XL11-591) L9485 x XL Prison function lock Latch retracted by key outside or knob inside. Outside knob always free spinning. Deadbolt only thrown or retracted by guard s key. Inside knob becomes fixed when deadbolt is thrown. Prisoner s key only retracts latchbolt. Furnished standard with tamper-resistant Torx screws. Specify per XL L9486 F15 LV9486 Faculty/hotel/restroom lock do not disturb indicator Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown do not disturb plate is displayed. All keys become inoperative except emergency or display keys. Turning inside knob/lever retracts both deadbolt and latchbolt simultaneously. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. L9486 x L LV9486 x L L9486 with occupied indicator Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown Occupied plate is displayed and all keys become inoperative except emergency keys. Turning inside knob/lever simultaneously retracts both deadbolt and latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. (Previously XL11-580) L9496 Privacy with occupied indicator Knob/lever retracts latchbolt from either side Deadbolt thrown or retracted by key outside (retraction by key required in the event of an emergency) or inside thumbturn. Throwing deadbolt locks outside knob/lever and displays Occupied plate. Rotating inside knob/lever simultaneously retracts both deadbolt and latchbolt, and unlocks outside knob/lever. Inside lever is always free for immediate egress. (Previously XL11-885) * In a double-door application where the dummy will be used as the strike order Armored front strike separately. Schlage L Series 19

44 Lock functions Double cylinder non-deadbolt functions Lock functions Double cylinder deadbolt functions Schlage ANSI L9060 F09 LV9060 Apartment entrance lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from inside. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is closed. Inside lever is always free for immediate egress. Schlage ANSI L9457 LV9457 Classroom security lock with deadbolt Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side. Throwing deadbolt locks outside knob/lever. Turning inside knob/lever simultaneously retracts deadbolt and latchbolt, and unlocks outside knob/lever. Inside lever is always free for immediate egress. L9071 LV9071 Classroom security lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Inside lever is always free for immediate egress. L9077 LV9077 Classroom security holdback lock Latchbolt retracted by knob/lever from either side unless outside is locked by key from either side. When locked, latchbolt retracted by key outside or knob/lever inside. Auxiliary latch deadlocks latchbolt when door is locked. Depress inside knob/ lever and turn key 360 for holdback feature. Inside lever is always free for immediate egress. L9466 F14 Store/utility room lock with deadbolt * Latchbolt retracted by knob/lever from either side. Deadbolt thrown or retracted by key from either side. L9482 x XL LV9482 x XL Institution lock with deadbolt * Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Deadbolt thrown or retracted by key either side. Auxiliary latch deadlocks latchbolt when door is closed. Specify per XL L9082 F30 LV9082 Institution lock Latchbolt retracted by key from either side. Knob/lever on both sides always inoperative. Auxiliary latch deadlocks latchbolt when door is closed. L9082EL L9082EU L9082 electrically locked or electrically unlocked both sides * EL: Outside and inside knob or lever continually locked electrically. Latchbolt retracted by key either side. Switch or power failure allows outside and inside knob/lever to retract latchbolt. Auxiliary latch deadlocks latchbolt when door is closed. EU: Outside and inside knob/lever unlocked electrically. Latchbolt retracted by key either side. Switch or power failure keeps inside and outside knob/lever locked. Auxiliary latch deadlocks latchbolt when door is closed. (Previously XL11-452) In a double-door application where the dummy will be used as the strike order Armored front strike separately. *Caution: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only. 20 Schlage L Series

45 Lock functions Full mortise deadlocks Lock functions Small mortise deadlocks Schlage L9460 ANSI F17 Cylinder x thumbturn lock Deadbolt thrown or retracted by key outside or thumbturn inside. L9462 F16 Double cylinder lock * Deadbolt operated by key from either side. L9463 Classroom lock Deadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt, but cannot project it. L9464 Cylinder lock F18 Deadbolt thrown or retracted by key from one side. No trim on opposite side. L9460 x XL L9460 with pull Knob/lever both sides fixed. Deadbolt thrown or retracted by key outside or thumbturn inside. L9460 x XL Single cylinder deadlock with pull Deadbolt thrown or retracted by key outside or thumbturn inside. No latch, but inside knob or lever is spring-loaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever. Schlage ANSI L460 E06071 Cylinder x thumbturn lock Deadbolt thrown or retracted by key outside or thumbturn inside. L462 E06061 Double cylinder lock * Deadbolt operated by key from either side. L463 E06091 Classroom lock Deadbolt thrown or retracted by key from outside. Inside thumbturn cylinder retracts deadbolt, but cannot project it. L464 Cylinder lock E06081 Deadbolt thrown or retracted by key from one side. No trim on opposite side. L480 Door bolt Deadbolt thrown or retracted by thumbturn from one side. No trim on opposite site. L496 Deadbolt with occupied indicator Deadbolt thrown or retracted by key outside or thumbturn inside. When deadbolt is thrown Occupied plate is displayed. (Previously XL11-911) L9462 x XL Double cylinder deadlock with pull * Deadbolt thrown or retracted by key from either side. No latch, but inside knob/lever is springloaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever. L9464 x XL Deadlock with pull Deadbolt thrown or retracted by key from one side. No latch, but inside knob/lever is springloaded. Rotating inside knob/lever also retracts deadbolt. Fixed outside knob/lever. Schlage L Series 21

46 Schlage L Series universal transformation instructions The L9050 universal case can be transformed into nine different functions * with just a few additional parts. For some functions, additional parts are not necessary. ANSI function F04 Function type L9050 (w/thumbturn) office Function description Latchbolt operated by lever either side except when outside lever is made inoperative by a stop or other mechanical means other than key. When outside lever is locked, latchbolt is retracted by key from outside or by operating inside lever. Auxiliary deadlatch. F01 L9010 passage Latchbolt operated by lever from either side at all times. F05 L9070 classroom Latchbolt operated by lever either side except when outside lever is locked from outside by key or push button mechanism. When outside is locked latchbolt is retracted by key or by operating key or push button, and outside lever from outside or by operating inside lever. Auxiliary deadlatch. F07 L9080 storeroom Latchbolt operated by key outside or by operating inside lever. Outside lever always inoperative. Auxiliary deadlatch. F09 L9060 apartment entrance Latchbolt operated by lever either side, except when made inoperative by key from inside. When outside is locked latchbolt is retracted by key from outside or by operating inside lever. Auxiliary deadlatch. F31 L9080 (less outside cylinder) exit or communicating Latchbolt operated by inside lever. Non-removable blank trim or no trim outside. F32 L9071 classroom security Latchbolt retracted by lever either side except when outside lever is locked by key from inside or outside. When outside lever is locked latchbolt is retracted by key either side or by inside lever. Auxiliary deadlatch. L9080 (less outside lever) service Latchbolt operated by key outside or by operating inside lever. No outside lever. Auxiliary deadlatch. L9080 (less inside trim) utility Latchbolt retracted by key outside; outside lever always inoperative. No inside trim. Auxiliary deadlatch. L9070 (less inside trim) closet Latchbolt operated by lever on outside except when outside lever is locked from outside by key. When outside is locked latchbolt is retracted by key or by operating key from outside lever. Auxiliary deadlatch. * Assumes Everest cylinders and L9050 as base function (L chassis/l9050lb distributor lock case) only applies to sectional trim (not escutcheon). 22 Schlage L Series

47 Transformation instructions Additional part(s) Install cloverleaf cam cylinder on outside; install thumbturn assembly on inside. No additional parts required. Do not install thumbturn unit on inside or cylinder outside. Install chassis in the unlocked position. No additional parts required. Install cloverleaf cam cylinder on outside; do not install thumbturn assembly on inside. No additional parts required. Do not install thumbturn on inside. Install chassis in the locked position. Replace cloverleaf cam L with straight cam B (Everest), L with K (IC and SFIC) and install on outside. Cams B (Everest), K (IC and SFIC) or L or L for modular cylinders B K L "/ 1 3 8"/ 1 5 8" L "/ 1 1 2"/ 1 3 4" Do not install thumbturn on inside. Install cloverleaf cam cylinder on inside. Replace clover leaf cam L with straight cam B (Everest), L with K (IC and SFIC) and install on outside. Mortise cylinder assembly and cams B (Everest), K (IC and SFIC) or L or L for modular cylinders B K L "/ 1 3 8"/ 1 5 8" L "/ 1 1 2"/ 1 3 4" Do not install thumbturn unit on inside. Install chassis in the locked position. Install inside lever with L mounting plate; do not install outside lever or cylinder. Mounting plate L L Do not install thumbturn unit on inside. Install cloverleaf cam cylinder on inside and outside. Mortise cylinder assembly and cam L Cylinder Only Mortise cylinder assembly L L "/ 1 3 8"/ 1 5 8" Dim. X =.261 L Dim. X = "/ 1 1 2"/ 1 3 4" Do not install thumbturn unit on inside. Install chassis in the locked position. Replace cloverleaf cam L with straight cam B (Everest), L with K (IC and SFIC) and install on outside. Install inside lever with L mounting plate; do not install outside lever. Cams B (Everest), K (IC and SFIC), mounting plate L or L or L for modular cylinders L B K L "/ 1 3 8"/ 1 5 8" L "/ 1 1 2"/ 1 3 4" Do not install thumbturn unit on inside. Install chassis in the locked position. Replace cloverleaf cam L with straight cam B (Everest), L with K (IC and SFIC) and install on outside. Install inside lever on outside with L mounting plate; do not install inside lever. Cams B (Everest), K (IC and SFIC), mounting plate L or L or L for modular cylinders L B K L "/ 1 3 8"/ 1 5 8" L "/ 1 1 2"/ 1 3 4" Install cloverleaf cam cylinder on outside; do not install thumbturn assembly on inside. Install inside trim on outside with L mounting plate. Mounting plate L L Schlage L Series 23

48 Specifications Handing: L9000 Series lock bodies are field-reversible without disassembly. L400 Series locks are non-handed. Door thickness: 1 3 4" (44 mm) standard " (35 mm) to 2 1 2" (64 mm) optional. Over 2 1 2" (64 mm) door ranges vary by function. No escutcheon available for 1 3 4" (44 mm) doors standard. 2" to 2 3 8" (51 mm to 60 mm) optional. Specify door thickness if other than 1 3 4". Backset: 2 3 4" (70 mm) only. Armored front: L9000 Series: 1 1 4" x 8" x 7 32" (32 mm x 203 mm x 6 mm) standard " x 8" x " (27 mm x 203 mm x 6 mm) optional. L400 Series: " x 3 5 8" x 1" (113 mm x 92 mm x 25 mm) Case size: L9000 Series: " x " x 1" (113 mm x 154 mm x 25 mm) L400 Series: " x 3 5 8" x 1" (113 mm x 92 mm x 25 mm) Spacing: Knob or lever to cylinder, 3 7 8" (98mm); knob or lever to thumbturn hub, " (68mm). Bolts: 1" (25mm) throw stainless steel deadbolt and 3 4" (19mm) throw stainless steel latch with anti-friction tongue. Exposed trim: Knobs: #41 and #42 heavy-duty wrought brass, bronze or stainless steel knobs match D Series knobs. Levers: Forged brass or bronze and cast stainless steel. Designs available to match D Series levers. 93 Lever design: Extruded brass, bronze or stainless steel. Mediterranean designs: Forged-brass lever and rose. Escutcheons: L escutcheons are cold-forged brass or bronze and stainless steel. N escutcheons are heavy wrought reinforced brass, bronze and stainless steel. Trim combinations: Available with knob both sides, lever both sides, or knob and lever with rose or escutcheon both sides. Certifications ANSI: L9000: ANSI A Series 1000, Grade 1 Operational and Security, UL Listed for 3-hour fire door (except L9076 and L9007). With interchangeable core cylinders: Grade 2 Security. With concealed shell cylinder: A Grade 1 Operational and Security. ANSI/ASTM F Grade 40, UL Listed. L400: ANSI A156.5 Grade 1. California State Reference Code: (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1 2" of door face. UL / cul: All locks listed for A label single doors, 4' by 10'. Letter F and UL symbol on latch front indicate listing. Electrified functions are UL19X Listed for single-point locking applications. UL437 Listed locking cylinder optional: specify Primus Series cylinder. Door preparation for L9000 Series 8" 203 mm 1-1/4" 32 mm 2-3/4" 70 mm 4-1/2" 114 mm 3-7/8" 98 mm 1" 25 mm Door preparation for L400 Series 6-1/4 " 159 mm Strike: L9000 Series: ANSI curved lip strike 1 1 4" x 4 7 8" (32 mm x 124 mm) x " (30 mm) lip to center with dust box standard. L400 Series: 1 1 8" x 3 5 8" (29 mm x 92 mm) with dust box. Cylinder & keys: 6-pin Everest C123 keyway cylinder with two patented keys standard. 5-9/16" 141 mm 1-1/4" 32 mm 2-3/4" 70 mm 3-3/4" 95 mm 1" 25 mm Keying options: Interchangeable core and Primus high security cylinders. Master keying, grand master keying and construction keying. 4-1/2" 114 mm 34 Schlage L Series

49 How to order To order Schlage products, descriptive data should be in the same sequence as shown. Line item Qty Product Outside Inside Des Fin Des Fin Hand Front Strike Door thickness Ext Dim Additional details Line item number 2 Quality 3 Complete model number with function and cylinder type To order cylinder options, change P at the end of the model number as follows: L9453P L9453L L945C L9453J L9453R L9453T L9453BD L9453GD L9453HD L9453BDC Standard Less standard cylinder. For Primus cylinder, specify this option and order Primus cylinder separately. With temporary plastic construction cylinder. Double cylinder functions ordered less cylinder are furnished with these construction cylinders to maintain timing of key cams. Prepared for full size interchangeable core, less core. For Primus core, specify this option and order Primus core separately. With full-size conventional interchangeable core installed. Order control keys separately. With full-size (temporary) construction core installed. Order all keys separately. Prepared for small format (Falcon, Best, etc.) interchangeable core (SFIC), less core. With Everest B Family restricted keyway small format core installed. Order control keys separately. With small format keyed brass construction core installed. Order all keys separately. With small format disposable plastic construction core installed. 4/5 Outside design / finish. Specify tactile warning (knurling) here as 8 before lever design, e.g To specify complete design, combine the numeric knob or lever design with the alpha rose or escutcheon design. Example: 03L, 93A, 42B. When ordering Mediterranean design levers with L escutcheons, specify AST/00L, AVA/00L or MER/00L. 6/7 Inside design/finish. Leave blank if same as outside. 8 Hand. One hand per line item. 9 Front (use Strike field on Schlage form). Leave blank for standard armored front or enter number for narrow front. 10 Strike. Leave blank for standard or specify part number for optional strike. LLL = Less strike. 100 = 1" 118 = 1 1 8" 114 = 1 1 4" 138 = 1 3 8" 112 = 1 1 2" 134 = 1 3 4" 11 Door thickness, if non-standard. Example: 200 = 2". 12 Extension, to specify whether thick door is extended inside (EI), outside (EO), differently (ED) or equally (EE). 13 Dimension for strike lip lengths. See strike page for availability of specific dimensions with specific strikes. 14 Keying detail (e.g. key symbol, keyway, bitting) and other special requirements. 200 = 2" Example Line item Qty Product Outside Inside Des Fin Des Fin Hand Front Strike Door thickness Ext Dim Additional details 1 50 L9453P 03A 626 RH L9453P 03A 626 LH L A 626 RH L A LH L9456P 07L RH L9456P 07L 626 LH Note: Schlage order forms are available at no charge by contacting your Allegion security & safety consultant or customer service. Schlage L Series 35

50 L909x Series Electrified mortise Overview The Schlage L909x Series is the next generation of electrified mortise lock. The series utilizes the latest technology to offer tremendous utility and flexibility. Universal input voltage accepts 12 or 24V DC for installation flexibility User selectable fail safe/fail secure changing mode between EL and EU is as simple as flipping a switch on the lock case Low maximum current draw 0.4amps - allows multiple locks on a single power supply Low holding current 0.01 amps produces minimal heat, eliminating hot levers in electrically locking applications and allowing reliable operation even in poorly ventilated wood doors All-new RX switch monitors the inside lever with enhanced detection level that balances security with lever sensitivity New modular RX design RX can be added on at a later time without opening the lock case Standard Allegion Connect quick-connect Molex system (can be cut off if traditional wiring splicing preferred) UL listed for 3 hour fire door Available functions Models without deadbolt No cylinders L9090: Outside lever EL/EU L9091: Both levers EL/EU Outside cylinder L9092: Outside lever EL/EU * L9093: Both levers EL/EU Inside and outside cylinders L9094: Outside lever EL/EU L9095: Both levers EL/EU ** Deadbolt Models Outside cylinder, inside thumbturn L9492: outside lever EL/EU L9493: both levers EL/EU Inside and outside cylinders L9494: Outside lever EL/EU L9495: Both levers EL/EU Available options Request to Exit (RX) Latchbolt Monitor (LX) Door Position Sensor (DPS) - non-deadbolt functions only Deadbolt Monitor (DM) - deadbolt functions only *L9092 replaces L9080EL/EU; **L9095 replaces L9082EL/EU

51 Ordering instructions Order using standard Schlage order form as follows: L Series mortise indicators Function + cylinder Trim Finish Handing Option code L9092EUP 06A 626 RH RX, LX, DPS Lock specifications Function L9090EL/EU, L9091EL/EU, L9092EL/EU, L9093EL/EU, L9094EL/EU, L9095EL/EU, L9492EL/EU, L9493EL/EU, L9494EL/EU, L9495EL/EU (see front of datasheet for model details) Specifying EL or EU provides the factory pre-set position; setting can easily be changed by moving a switch on the lock case. Cylinder P (Everest 29 standard cylinder) L (Less cylinder) R (Everest 29 FSIC) Leave cylinder code blank if cylinder not applicable J (Less FSIC) T (Construction FSIC) GD (Everest 29 SFIC) BD (Less SFIC) BDC (Disposable SFIC) HD (Construction SFIC) Trim Finish Standard levers: 01, 02, 03, 05, 06, 07, 12, 17, 18, ACC, AST, LAT, LON, MER, OME Decorative levers: M51, M52, M53, M54, M55, M56, M57, M61, M62, M63, M81, M82, M83, M84, M85 Sectional (rose) designs: A, B, C, AVA (AST lever only), MER (MER lever only). Escutcheon designs: L and N. 605 Bright brass 613 Oil rubbed bronze 626AM Satin chrome anti-microbial 606 Satin brass 619 Satin nickel 629 Bright stainless steel 609 Satin brass, blackened 625 Bright chrome 630 Satin stainless steel 612 Satin bronze 626 Satin chrome Handing LH (Left Hand) RH (Right Hand) LR (Left Hand Reverse) RR (Right Hand Reverse) Option 630AM Satin stainless steel anti-microbial 643e Aged bronze RX (Request to Exit), LX (Latchbolt Monitor), DPS (Door Position Sensor, available non-deadbolt models), DM (Deadbolt Monitor, available deadbolt models). See pricebook for additional lock options. Note: Messaging indicators are not available for the L909x Series Allegion Connect The L909x Series electrified mortise comes standard with Allegion Connect, a factory-installed Molex connector system that utilizes quick-connect harnesses and hinges for simplified installation and maintenance. Alternately, the connector can be cut off and the lock installed with traditional wire splicing methods. Note that the Allegion Connect harnesses and hinges are sold separately. Allegion Connect cables Door type Hollow metal Wood 6" wire harness Con-6 Con-6P 12" wire harness Con-12 Con-12P 26" wire harness Con-26 Con-26P 32" wire harness Con-32 Con-32P 38" wire harness Con-38 Con-38P 44" wire harness Con-44 Con-44P 50" wire harness Con-50 Con-50P 192" wire harness Con-192 Con-192P 6" extension to power supply Con-6W Con-6W Variable length wiring harness (6 to 192 ) EPT or electrified hinge 6 wiring harness To power supply Note: Harness for hollow metal doors have connectors both ends; wood door harness comes w/connector on one-end with crimped pins on other w/attachable connector (required in wood doors due to more narrow cable raceway) About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit Allegion , Rev. 11/15

52 Sectional trim N escutcheon trim L Series mortise indicators Overview The 180 degree visibility indicator for the Schlage L Series mortise lock offers unparalleled visibility and flexibility. The unique features of the indicator make it ideally suited for classroom security applications as well as traditional occupied/vacant applications. N escutcheon indicators The L Series indicator features: 2" x 1 2" display for easy viewing at a distance 180 windows for visibility at any angle Cylinder Thumbturn Cointurn Emergency key High-mount placement for quick assessment during emergency lockdown High contrast colors (white/red, black/white) for ease of reading Sectional indicators Choice of four text and/or symbol messages Available for over 30 functions, for inside or outside of door Available in Sectional trim or N Escutcheon trim Cylinder Thumbturn Cointurn Emergency key Note: Indicators used on cylinder functions will require an additional door preparation hole. Sectional trim requires two mounting screws into door. Please reference product templates for details.

53 Available messages and option codes LOCKED OCCUPIED DO NOT DISTURB UNLOCKED VACANT Inside trim L L L L Outside trim L L L L Note: indicators available for inside or outside only; not possible to have an indicator on both inside and outside trim Ordering instructions To order an indicator as part of a new lock, specify the option code corresponding to the desired message (locked/unlocked, occupied/vacant, etc) and desired trim placement (inside or outside) at the end of the lock order. Order from Schlage using the standard order form as shown below. Please see pricebook for retrofit kits that allow indicator upgrades to installed Schlage L Series mortise locks. L Series mortise indicators Function + cylinder Trim Finish Handing Option code L9050P 06A 626 RH L Lock specifications Function Available with inside indicator: L/LV9040, 9044, 9050, 9056, 9060, 9071, 9440, 9444, 9456, 9457, 9458, 9460, 9462, 9463, 9466, 9473, 9480, 9485, 9350, 9371, 460, 462, 463, 480 Available with outside indicator: L/LV9040, 9044, 9050, 9056, 9060, 9070, 9071, 9440, 9444, 9456, 9457, 9458, 9460, 9462, 9463, 9464, 9465, 9466, 9473, 9480, 9485, 9350, 9370, 9371, 460, 462, 463, 464 Cylinder P (Everest 29 standard cylinder) L (Less cylinder) R (Everest 29 FSIC) J (Less FSIC) T (Construction FSIC) GD (Everest 29 SFIC) BD (Less SFIC) BDC (Disposable SFIC) HD (Construction SFIC) Leave cylinder code blank if cylinder not applicable Trim Standard levers: 01, 02, 03, 05, 06, 07, 12, 17, 18, ACC, AST, LAT, LON, MER, OME Decorative levers: M51, M52, M53, M54, M55, M56, M57, M61, M62, M63, M81, M82, M83, M84, M85 A, B, or C Sectional (Rose) design or N Escutcheon, AVA (AST lever only) and MER (MER lever only) also available. Finish 605 Bright brass 606 Satin brass 609 Satin brass, blackened 619 Satin nickel 625 Bright chrome 626 Satin chrome Handing LH (Left Hand) RH (Right Hand) 626AM Satin chrome anti-microbial 629 Bright stainless steel 630 Satin stainless steel 630AM Satin stainless steel anti-microbial 643e Aged bronze Option LR (Left Hand Reverse) RR (Right Hand Reverse) Specify indicator option code from table at top of page for desired message and placement Note: Can only specify an indicator for inside or outside trim; not possible to have indicators on both sides Ordering examples L9050P 03N 626 RH L Office function w/escutcheon locked/unlocked indicator on inside (thumbturn side) of door L9050P 06A 626 RH L Office function w/sectional locked/unlocked indicator on outside (cylinder side) of door About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit Allegion , Rev. 05/15

54 L909x Series Electrified mortise lock Overview Features and benefits The most complex electronic access systems still rely on mechanical hardware to operate properly. Advanced electronic technology can go to waste without adequate mechanical locking strength and functionality. The Schlage L909x series of electrified mortise locks serves as the mechanical component to an electrified locking solution. The lock can be integrated into an electronic access control system or be used as a stand-alone solution with a buzzer or other device as the controller. The L909x series offers exceptional flexibility and power savings. The lock automatically adapts to 12 or 24V DC input, and a case-mounted switch allows selection between EL and EU operation. Request to exit is modular and can be added without opening the lock case. 0.4amps maximum current draw allows multiple units on a single power supply, while 0.01amps holding current eliminates hot levers in EL applications. Utilizing the same levers, trims and options as the Schlage L-series mortise, the L909x integrates as seemless with the mechanical component of the project as the electronic. And because it is based on the Schlage L mortise, it carries the same proven record of performance, strength and durability from the most trusted name in the industry. Recommended applications The L909x Series Electrified Mortise Lock is useful for many applications, including but not limited to: Security control centers Universal input voltage- accepts 12 or 24V DC for installation flexibility User selectable fail safe/fail secure through use of switch on lock case Low maximum current draw allows multiple locks on a single power supply Low holding current produces minimal heat, eliminating hot levers in electrically locking applications Modular RX design allows RX to be added at a later time without opening the lock case UL listed for 3 hour fire door Available Options: Request to Exit (RX) Latchbolt Monitor (LX) Door Position Sensor (DPS) - non-deadbolt functions only Deadbolt Monitor (DM) - deadbolt functions only Cashier rooms Fire safety exits Equipment rooms Hazardous material storage

55 L Series mechanical specifications L Series electronic specifications Handing Field reversible Voltage Auto-detects 12/24V DC operation Door thickness 1 3 4" (44 mm) standard, 1 3 8" (35 mm) to 2 1 2" (64 mm) optional. Over 2 1 2" (64 mm) door ranges vary by function. Specify door thickness other than 1 3 4". Backset 2 3 4" (70 mm) only Armored front Case size Spacing Standard: 1 1 4" x 8 x 7 /32" (32 mm x 203 mm x 6 mm) Optional: x 8" x 7 32" (27 mm x 203 mm x 6 mm) " x " x 1" (113 mm x 154 mm x 25 mm) Knob or lever to cylinder, 3 7 8" (98 mm); knob or lever to thumbturn hub, " (68 mm) Bolts 1" (25 mm) throw stainless steel deadbolt and 3 4" (19 mm) throw stainless steel latch with anti-friction tongue Cylinders and keys 6-pin solid brass cylinder is standard with Everest 29 S123 keyway furnished as default. Furnished with 2 nickel silver keys. Additional Schlage keyways available. Keying options Available in full size interchangable core (FSIC) and small format interchangable core (SFIC). Also available less cylinder and less FSIC to allow for Primus XP cylinder usage. Strike ANSI curved lip strike 1 1 4" x 4 7 8" (32 mm x 124 mm) x " (30 mm) lip to center with dust box standard Trim Three rose (sectional) trims and two escutcheon trims Levers 30 available lever designs Peak current Holding current Operating temperature 0.4 amps amps Maximum +140 F (+60 C) (-30 C) Minimum -22 F Interfacing devices HandReaders, wall switches, security consoles, access card readers, thermo-sensitive devices, smoke and fire alarms, telephone access controls, automatic time devices and computerized controls Micro switch 3 amps, 125V AC; 2 amps, 30V DC electrical rating for request-to-exit (RX) function and latchbolt monitor (LX) L Series electrified functions No Cylinder Outside Cylinder Inside & Outside Cylinder L9090EL/EU Electrically locking/unlocking outside lever L9091EL/EU Electrically locking/unlocking both levers L9092EL/EU (Replaces L9080EL/EU) Electrically locking/unlocking outside lever L9093EL/EU Electrically locking/unlocking both levers L9094EL/EU Electrically locking/unlocking outside lever L9095EL/EU (Replaces L9082EL/EU) Electrically locking/unlocking both levers Note: See pricebook for additional details. L Series electrified deadbolt functions Outside Cylinder Inside & Outside Cylinder L9492EL/EU Electrically locking/unlocking outsider lever L9493EL/EU Electrically locking/unlocking both levers L9494EL/EU Electrically locking/unlocking outsider lever L9495EL/EU Electrically locking/unlocking both levers Allegion, the Allegion logo, Schlage, and the Schlage logo are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners. About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage, SimonsVoss and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit Allegion , Rev. 03/17

56 PS902 2 amp power supply Photo as shown includes optional board(s). Please contact your local sales office or visit the support section on our website for configuration assistance. Overview Features and benefits The Schlage comprehensive line of power supplies and option boards was designed to address the changing needs of the access control market. Installation is simplified by utilizing a flat mounting design and polarized locking connectors for option boards. This design eliminates the need for racks and side connectors. The flat mounting of the option boards also provides for easier access to the terminal blocks for connection of electrified devices (such as electrified strikes, electromagnetic locks, card readers, etc.). Common to the line of PS900 Series power supplies is a constant output rating at both 12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board connectors. New fire alarm interface board mounting allows outputs to be configured as switched (power cut) or unswitched (power continues) when signal is provided. 12/24 VDC constant output, field selectable with jumper Provides low-voltage, Class 2, filtered and regulated power Universal VAC, fused primary input Single polarized option board connector AC input and DC output monitoring circuit with LED indicators Externally visible AC input indicator with isolated SPDT contacts High-voltage protective cover for AC circuitry (not shown) Battery back-up board auto-selects voltage Optional Fire Alarm plug-in board available UL 294, ULC-S318, RoHS, and FCC Part 15 certified

57 Configuration options Available option board, fire alarm and battery backup connection locations: ounting Locations (gray) 1 FA BBK PS902 power supply specifications Specification Input voltage Output voltage Enclosure Operating temperature Description 120/240 VAC, 50/60 Hz, universal input 12 or 24 VDC Field selectable with jumper Switching supply, 5% regulation, 240mVpp max ripple Grey/baked enamel 14" x 12" x 4" (H x W x D) Eight 1 2" x 3 4" knockouts NEMA Grade 1 Hinged cover with lock down screws F (0-49 C) Battery 1 Battery 2 Certifications ANSI/UL 294 ULC-S318 RoHS FCC Part 15 Class 2 Exit device support Von Duprin QEL Up to 2 1 BBK Von Duprin EL None Falcon EL None 1. Requires the 1use FA of one 900-2RS 2 option board Battery 1 Battery 2 1 FA 2 Battery backup (install on main board) Available option boards AC primary fuse size Battery fuse size DC output protection Indicators Weight (power supply) 900-BB: Battery backup board only 900-BBK: Battery backup kit (backup board plus battery pack) 900-FA: Plug-in fire alarm (install on main or option board) 900-2RS: 2 Relay option board capable of individual or sequential operation for single and pair door applications 900-4R: 4 Relay option board 900-4RL: 4 Relay option board with integrated logic and individual or sequential operation capability for controlling security interlocks, auto operators, and time delay function 900-8F: Fused, 8 zone option board 900-8P: PTC, 8 zone option board 3.15A, 250v, 5 x 20mm 7.5A 32v ATO blade style Overload protection - current limited foldback circuit LED indicators: - AC input (visible on outside of enclosure) - DC output Isolated SPDT contacts to monitor AC power status Approx. 9.0 lbs 3 Weight (each battery) AC input termination 4.0 lbs 3 position terminal block with protective cover Wire capacity: 10 AWG max. DC output termination 2 position terminal block Wire capacity: 12 AWG max. PS906 with battery backup 1 FA 2 BBK Option board connectors 1 Fire alarm board connector Keylock Accessories Yes Optional 900-BAT: Backup battery pack Allegion, the Allegion logo, Schlage, and the Schlage logo are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners. Battery 1 Battery 2 About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit Allegion , Rev. 08/16

58 98-F/99-F Rim exit device The 299F Strike ships standard, optional strikes available 98-F and 99-F Rim fire exit devices for all types of single doors up to 4' x 10' (1219mm x 3048mm) or 8' x 10' (2438mm x 3048mm) double doors with 9954 or 9854 mullion, UL listed for fire exit hardware. See page 76 for detailed information on UL listed fire exit hardware label and door opening size information. Devices are ANSI A Grade 1. The 98-F device has a smooth mechanism case and the 99-F device has a grooved case. The rim device is non-handed except when the following device options are used: -2 (double cylinder) or SS (signal switch). See opposite page for available outside trim and device functions. Finishes US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 & 643E. US15 and US32D available with 98 Series only. 499F Strike with 9854/9954 mullion 98-F/99-F Rim exit device Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove NL drive screw from device. Device lengths 3' 2'4' to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline from finished floor Center case dimensions Mechanism case dimensions Projection Latch bolt Fasteners & sex bolts (SNB) /16" (1011 mm) /16" (1008 mm) with mullion 8" x 2 3 /4" x2 3 /8" (203mm x 70mm x 60mm) 2 1 /4" x 2 1 /4" (57mm x 57mm) Pushbar neutral 3 13 /16" (97 mm) Pushbar depressed 3 1 /16" (78 mm) Deadlocking, 3 /4" (19mm) throw Includes screw pack for 1 3 /4" (44mm) and 2 1 /4" (57mm) thick metal or wood doors. Optional 425 SNB available for metal doors. 425 & 825 SNB required on wood doors without SLM blocking. See page 11 for quantities. Electric options LX Latchbolt monitor switch RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric locking & unlocking trim EL Electric latch retraction QEL Quiet electric latch retraction SS Signal switch CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect Mechanical -2 Double cylinder options AX Accessible device GBK Glass bead kit PN Pneumatic latch retraction XP Extra protection SNB Sex bolts SEC Security screws SLM Special Laminate Material Blocking Dogging option No mechanical dogging. EL and QEL option available Strikes 299F Dull black, 499F with mullions XP Extra protection 90 latch-tostrike contact Force resistance of 2,000+ lbs. EL Electric latch retraction Enables remote unlatching Alternative to manual dogging QEL Quiet electric latch retraction Bolt retraction via switch Converts exit door to push-pull operation AX Accessible device UL certified to meet new 5 lb. maximum operating force requirement Exceeds ANSI/ BHMA requirements PN Pneumatic latch retraction For areas where electrical devices banned Special linkage for mechanical or pneumatic dogging RX Pushpad monitor switch Signals use of an opening SPDT switch to monitor pushpad ALK Alarm exit kit Unauthorized opening triggers 85-decibel horn Set in armed or disarmed mode by key CX Chexit delayed exit Meets NFPA 101 requirements Self-contained controls, locking, alarm SG Safety glow Shows exit door location in darkness or smoke Developed to meet MEA standards CON Allegion Connectors Common connectors to connect various door hardware all the way to the power supply 10 Von Duprin 98/99 Series

59 Standard trim EO DT NL NL-OP Product description Trim description Escutcheon plate size No outside trim Exit only 98EO-F 99EO-F Dummy trim Pull when dogged (not recommended for fire device) 98DT-F 99DT-F Night latch Key retracts latchbolt 98NL-F 99NL-F 990DT 990NL-R/V 3" x /16" x 3 /32" (76x360x2mm) 3" x /16" x 3 /32" (76x360x2mm) Pull center to center 5 1 /2" (140mm) 5 1 /2" (140mm) Projection 2" (51mm) 2" (51mm) ANSI function Cylinder type Rim Rim Handing Optional trim x990eo x996eo #425 SNB optional - HMD req. WD w/o SLM pkg. #825 SNB req. WD w/o SLM pkg. #425 SNB req. w/ 499F x996k-dt x996l-dt x696dt x697dt x996k-nl x996l-nl x696nl x697nl (if using trim) L L-NL L-BE L-DT Night latch Key retracts latchbolt optional pull required 98NL-OP-F 99NL-OP-F 110NL-MD 110NL-WD 98-F/99-F Rim exit device Product description Lever Key locks & unlocks 98L-F 99L-F Lever night latch Key retracts latchbolt 98L-NL-F 99L-NL-F Lever blank escutcheon Always operable (no cylinder) 98L-BE-F 99L-BE-F Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Lever dummy trim pull when dogged (not recommended for fire device) 98L-DT-F 99L-DT-F 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center Projection 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) ANSI function Cylinder type Rim Rim Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible #425 SNB optional - HMD req. WD w/o SLM pkg. #825 SNB req. WD w/o SLM pkg. 2 (if using trim) #425 SNB req. w/ 499F * Electrified lever operation available Von Duprin 98/99 Series 11

60 98/99 Finishes A. Center case cover B. Touch bar end cap C. Touch bar trim D. Cover plate E. Mechanism end cap F. Mechanism case Finishes Color US number BHMA number A, B, E C D & F Bright brass US3 605 Bright brass Bright brass US3, 605 Buffed anodized Satin brass US4 606 Bright brass Satin brass US4, 606 Anodized Satin bronze US Plated Satin bronze US10, 612 Anodized Bright chrome US Plated Bright stainless steel US32, 629 Buffed anodized Satin chrome US26D 626 Plated Satin stainless steel US32D, 630 Anodized Satin stainless steel * US32D 630 Stainless steel Satin stainless steel US32D, 630 Anodized Aluminum, anodized US Powder coat Satin stainless steel US32D, 630 Anodized Duranodic dark bronze Powder coat Powder coat Powder coat Black Powder coat Powder coat Powder coat Aged bronze 643E Relieved aged bronze Relieved aged bronze Special Finishes Color US number BHMA number Aged bronze, no relief A, B, E C D & F Satin bronze, oil-rubbed US10B 613 Oil-rubbed, US10B Oil-rubbed, US10B Powder coat Powder coat ** RAL # Powder coat Satin stainless steel US32D, 630 (unless specified to match device) Powder coat Bright bronze US9 611 Plated Bright bronze US9, 611 Buffed anodized Satin nickel * US Plated, clear powder Satin stainless steel US32D Anodized Satin chrome (antimicrobial) Satin stainless steel (antimicrobial) U26D-AM 626-AM AM Clear over chrome US32D-AM 630-AM AM Clear over stainless steel AM Clear over satin stainless steel US32D, 630 AM Clear over Satin Stainless Steel US32D, 630 AM Clear over anodized AM Clear over anodized Finishes Touch bar trim options Knurled Embossed Push Braille (Caution-Stairwell), satin stainless steel only RSS, US32D only, red silk screen lettered EMERGENCY EXIT ONLY PUSH TO OPEN AND SOUND ALARM. * US32D and US15 available on 98 Series only ** Other custom logo touchbar trim and RAL color combinations available - consult factory 77 Von Duprin 98/99 Series 77

61 98/99 Finishes Finishes* Color US number BHMA number Color US number BHMA number Chromium, polished US Bronze, dull US Anodized, aluminum US Satin nickel Available for 35A ONLY US Chromium, dull US26D 626 Satin stainless steel US32D 630 Brass, polished US3 605 Duranodic dark bronze Finishes Brass, dull US4 606 Black Aged bronze 643e Special finishes Color US number BHMA number Satin chrome, Antimicrobial US26D- AM 626-AM Satin stainless steel, antimicrobial US32D- AM 630-AM Pushpad options Knurled Embossed Push Braille (Caution-Stairwell), satin stainless steel only RSS (Emergency Exit Push to open and sound alarm) Red Silkscreen lettering on US32D * Note: Durable powder coated finishes available at specific special request. PLEASE CONTACT FACTORY Von Duprin 98/99 Series

62 98/99 Strike information Strikes for rim devices F 499F 1408 Projection 9 /16" (14mm) Projection 13 /16" (21mm) Projection 13 /16" (21mm) Projection 15 /16" (24mm) One per pair of doors 1439 Blade stop 1410 Integral stop Projection 1 /2" (13mm) Projection 1 /2" (13mm) Projection 3 /8" (10mm) Panic devices only Requires coordinator For panic exit application only, not fire rated XP Strikes for rim devices Projection 13 /16" (21mm) Projection 7 /8" (22mm) - For fire rated double door applications Strikes for vertical rod devices 248L-4 260U-Flush transom panic only 260U-F-Flush transom fire only Strikes for vertical cable devices Top 249 strike Bottom strike 1" (25 mm) ⁹ ₁₆" (14 mm) 1¹ ₂" (38 mm) ¹ ₈" (3 mm) Projection 9 /16" (14mm) Projection 3 /8" (10mm) Projection 3 /8" (10mm) Projection 13 /16" (21mm) 1¹⁹ ₃₂" (40 mm) ¹ ₈" (3 mm) 2³ ₄" (70 mm) Projection 1 /8" (3mm) F 499F Projection 13 /16" (21mm) Projection 15 /16" (24mm) Strike options / Dogging options 304L A 283 Projection 13 /16" (21mm) Mortise 5 /8" (16mm) Mortise 2 1 /2" (64mm) For use with WDC devices when used with wood frames Strikes for mortise lock devices A 576B. Not for use with astragals For use on wood doors, contact door manufacturer Acceptable for 90 minute pair of hollow metal doors Von Duprin 98/99 Series 59

63 98/99 Strike/Stile information Device type Standard single door Strike Standard double door Optional single door Optional double door Strike Trim/Stile w/ mullion* Trim/Stile Strike Trim/stile Strike w/mullion* Trim/Stile 990/ / / / / / / /697 Strike options / Dogging options 98/ XP 98/ F/99-F 299F XP98-F/XP99-F F 9975-F F 9957-F Latch retraction PL9827/PL9927 Pullman latch 9827-F 9927-F F 9947-F 9848-F 9948-F 9847WDC 9947WDC 9847WDC-F 9947WDC-F F 9949-F 9849-F 9949-F 9850WDC 9950WDC 9850WDC-F 9950WDC-F (Top) 299 (Middle) 304L/284-L (Bottom) 299 (Top) 299F (Middle) 304L (Bottom) 4 1 /2" (114mm) 4 1 /2" (114mm) 4 1 /2" (114mm) 4 1 /2" (114mm) 4 3 /8" (111mm) 4 3 /8" (111mm) 4 3 /8" (111mm) 4 3 /8" (111mm) 299 x /8" (124mm) 909 x 4954-XP 499F x /8" 954 x (124mm) 9954-XP 1439 or /16" (97mm) 4 1 /16" (103mm) 3 13 /16" (97mm) 299 x /16" (113mm) 1408 x /16" (97mm) 3 15 /16" (100mm) 1606 x /8" (112mm) 499F x 9854 KR A-576B A-576B 299 x F 499F x L 4 7 /8" (124mm) 4 7 /8" (124mm) 1439 or /16" (97mm) 4 1 /16" (103mm) 3 13 /16" (97mm) 299 x /16" (113mm) 1408 x /16" (97mm) 3 15 /16" (100mm) 1606 x /8" (112mm) 4 1 /4" (108mm) 3 13 /16" (97mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 3 13 /16" (97mm) 4 1 /4" (108mm) Strike Application Trim/Stile Optional strike Application Trim/Stile 990/ / / / (Top) 304L/248-L-4 (Bottom) 299 (Top) 304L/248-L-4 (Bottom) 299 (Top) 304L (Bottom) 338 (Top) 385A (Bottom) 338 (Top) 385A (Bottom) 338 (Top) 385A (Bottom) 338 (Top) 385A (Bottom) 249 (Top) 349 (Bottom) 249 (Top) 349 (Bottom) 150 (Top) 450 (Bottom) 150 (Top) 450 (Bottom) Single door Two vertical rod devices Vertical rod with Mortise lock device Two vertical rods Vertical rod with Mortise lock device Single door Two vertical rod devices Vertical rod with Mortise lock device Two vertical rod devices Vertical cable with Mortise lock device Two vertical cables Vertical cable with Mortise lock device Single door Two vertical cable devices Vertical cable with Mortise lock device Two vertical cable devices 3 11 /16" (94mm) 3 11 /16" (94mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 3 5 /8" (92mm) 3 5 /8" (92mm) 4 1 /8" (105mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 260U (Top) 385A (Bottom) 260U (Stainless) 385A (Bottom) 304L (Bottom) 304L (Bottom) 304L Single door Two vertical rod devices Vertical rod with Mortise lock device Two vertical rods Vertical rod with Mortise lock device Single door Two vertical rod devices Vertical rod with Mortise lock device 4 1 /4" (108mm) 304L Two vertical rod devices 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) Vertical cable with Mortise lock device Two vertical cable Vertical cable with Mortise lock device Single door Two vertical Cable devices Vertical cable with Mortise lock device 3 11 /16" (94mm) 3 11 /16" (94mm) 3 5 /8" (92mm) 3 5 /8" (92mm) 4 1 /4" 4 1 /8" (108mm) (105mm) 4 1 /4" 4 1 /4" (108mm) (108mm) 4 1 /4" 4 1 /4" (108mm) (108mm) 4 1 /4" 4 1 /4" (108mm) (108mm) 4 1 /4" 4 1 /8" (108mm) (105mm) 4 1 /4" 4 1 /4" (108mm) (108mm) 4 1 /4" 4 1 /4" (108mm) (108mm) Two Vertical 4 1 /4" (108mm) 4 Cable 1 /4" 4 1 /4" (108mm) (108mm) Devices Von Duprin 98/99 Series

64 UL Listing for fire exit hardware UL Listed fire exit hardware label and opening size Additional information Exit device 98-F 99-F 9875-F 9975-F 9827-F 9927-F 9827LBR-F 9927LBR-F 9857-F 9957-F 9847-F 9947-F Door material Metal Metal Double door With 9954 mullion With 9854 mullion 3 Hour 8' x 10' With kr9954 mullion 3 Hour 8' x 8' With kr9854 mullion 3 Hour 8' x 8' V x v same direction V x mortise same direction Single door 3 Hour 3 Hour 4' x 10' 8' x 10' 3 Hour 3 Hour 4' x 10' 8' x 10' Metal Metal Metal 3 Hour 4' x 8' 3 Hour 8' x 8' 3 Hour 8' x 8' 3 Hour 8' x 8' Metal 3 Hour 8' x 8' 90 Minute * 8' x 10' 90 Minute * 8' x 10' 3 Hour 8' x 10' 90 Minute * 8' x 10' 9847LBR-F 9947LBR-F Metal 90 Minute * 8' x 10' 9848-F 9948-F 9849-F 9949-F Metal Metal 90 Minute * 8' x 10' 90 Minute * 8' x 10' 9849LBL-F 9949LBL-F Metal 90 Minute * 8' x 10' * Currently, no door manufacturers offer a listing over 90 minutes with doors swinging same direction. Consult wood door manufacturers for current UL listings. 3 Hour 8' x 10' 3 Hour 8' x 10' 3 Hour 8' x 10' V x v double egress 3 Hour 8' x 10' 3 Hour 8' x 10' 3 Hour 8' x 10' 3 Hour 8' x 10' 3 Hour 8' x 10' 3 Hour 8' x 10' 3 Hour 8' x 10' Von Duprin 98/99 Series

65 98/99 Function, grade, type options ANSI Function, grade & type Function Grade 1, type 1 Grade 1, type 2 Grade 1, type 3 Grade 1, type 7 Grade 1, type 7 Grade 1, type 8 Grade 1, type 8 Grade 1, type 8 Grade 1, type EO & F 99EO & F 9827EO & F 9927EO & F 9875EO & F 9975EO & F 9847WDCEO & F 9947WDCEO & F 9850WDCEO & F 9950WDCEO & F 9847EO & F 9947EO & F 9848EO & F 9948EO & F 9849EO & F 9949EO & F 9857EO & F 9957EO & F 2 98DT 99DT 9827DT 9927DT 9875DT 9975DT 9847WDCDT 9947WDCDT 9850WDCDT 9950WDCDT 9847DT 9947DT 9848DT 9948DT 9849DT 9949DT 9857DT 9957DT 3 98NL & F 99NL & F 9827NL & F 9927NL & F 9875NL & F 9975NL & F 9847WDCNL & F 9947WDCNL & F 9850WDCNL & F 9950WDCNL & F 9847NL & F 9947NL & F 9848NL & F 9948NL & F 9849NL & F 9949NL & F 9857NL & F 9957NL & F 3 98K-NL & F 9827K-NL & F 99K-NL & F 9927K-NL & F 3 98L-NL & F 99L-NL & F 9827L-NL & F 9927L-NL & F 9875K-NL & F 9847WDCK-NL & F 9850WDCK-NL & F 9847K-NL & F 9975K-NL & F 9947WDCK-NL & F 9950WDCK-NL & F 9947K-NL & F 9875L-NL & F 9975L-NL & F 9847WDCL-NL & F 9947WDCL-NL & F 9850WDCL-NL & F 9847L-NL & F 9950WDCL-NL & F 9947L-NL & F 9848K-NL & F 9849K-NL & F 9857K-NL & F 9948K-NL & F 9949K-NL & F 9957K-NL & F 9848L-NL & F 9948L-NL & F 9849L-NL & F 9857L-NL & F 9949L-NL & F 9957L-NL & F 5 98TP & F 99TP & F 9827TP & F 9927TP & F 9875TP & F 9975TP & F 9847WDCTP & F 9947WDCTP & F 9850WDCTP & F 9950WDCTP & F 9847TP & F 9947TP & F 9848TP & F 9948TP & F 9849TP & F 9949TP & F 9857TP & F 9957TP & F 7 98TP-2 & F 99TP-2 & F 9875TP-2 & F 9975TP-2 & F 8 98K & F 99K & F 9827K & F 9927K & F 9875K & F 9975K & F 9847WDCK & F 9947WDCK & F 9850WDCK & F 9950WDCK & F 9847K & F 9947K & F 9848K & F 9948K & F 9849K & F 9949K & F 9857K & F 9957K & F 8 98L & F 99L & F 9827L & F 9927L & F 9875L & F 9975L & F 9847WDCL & F 9947WDCL & F 9850WDCL & F 9950WDCL & F 9847L & F 9947L & F 9848L & F 9948L & F 9849L & F 9949L & F 9857L & F 9957L & F 10 98K-2 & F 99K-2 & F 10 98L-2 & F 99L-2 & F TL & F 9927TL & F 14 98K-BE & F 9827K-BE & F 99K-BE & F 9927K-BE & F 14 98L-BE & F 99L-BE & F 9827L-BE & F 9927L-BE & F TL-BE & F 9927TL-BE & F 9875K-2 & F 9975K-2 & F 9875L-2 & F 9975L-2 & F 9847WDC & F 9947WDC & F 9850WDC & F 9950WDC & F 9847TL & F 9947TL & F 9875K-BE & F 9847WDCK-BE & F 9850WDCK-BE & F 9847K-BE & F 9975K-BE & F 9947WDCK-BE & F 9950WDCK-BE & F 9947K-BE & F 9875L-BE & F 9975L-BE & F 9847WDCL-BE & F 9947WDCL-BE & F 9847WDC & F 9947WDC & F 9850WDCL-BE & F 9847L-BE & F 9950WDCL-BE & F 9947L-BE & F 9850WDC & F 9950WDC & F 9848 & F 9948& F 9849 & F 9949& F 9857TL & F 9957TL & F 9848K-BE & F 9849K-BE & F 9857K-BE & F 9948K-BE & F 9949K-BE & F 9957K-BE & F 9848L-BE &F 9948L-BE & F 9847TL-BE & F 9848 & F 9947TL-BE & F 9948 & F 9849L-BE &F 9857L-BE & F 9949L-BE & F 9957L-BE & F 9849 & F 9949 & F 9857TL-BE & F 9957TL-BE & F Additional information Dimensions 75 Von Duprin 98/99 Series 75

66 Standard trim EO DT NL NL-OP Product description Trim description Escutcheon plate size No outside trim Exit only 98EO 99EO Dummy trim Pull when dogged 98DT 99DT Night latch Key retracts latchbolt 98NL 99NL 990DT 990NL-R/V 3" x /16" x 3 /32" (76x360x2mm) 3" x /16" x 3 /32" (76x360x2mm) Pull center to center 5 1 /2" (140mm) 5 1 /2" (140mm) Projection 2" (51mm) 2" (51mm) ANSI function Cylinder type Rim Rim Handing Optional trim x990eo x996eo Optional #425 SNB quantity for device Product description x996k-dt x996l-dt x696dt x697dt x996k-nl x996l-nl x696nl x697nl Lever Key locks & unlocks 98L 99L Lever night latch Key retracts latchbolt 98L-NL 99L-NL Lever blank escutcheon Always operable (no cylinder) 98L-BE 99L-BE Night latch Key retracts latchbolt optional pull required 98NL-OP 99NL-OP 110NL-MD 110NL-WD Lever dummy trim pull when dogged 98L-DT 99L-DT Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size L L-NL L-BE L-DT 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center Projection 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) ANSI function Cylinder type Rim Rim Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible Optional #425 SNB quantity for device * Electrified lever operation available 98/99 Rim exit device Notes Von Duprin 98/99 Series 9

67 Standard trim EO DT NL NL-OP TL TL-BE Product description Trim description Escutcheon plate size No outside trim Exit only 9827EO 9927EO Dummy trim Pull when dogged 9827DT 9927DT Night latch Key retracts latchbolt 9827NL 9927NL 990DT 990NL-R/V 3" x /16" x 3 /32" (76x360x2mm) 3" x /16" x 3 /32" (76x360x2mm) Night latch Key retracts latchbolt optional pull required 9827NL-OP 9927NL-OP 110NL-MD 110NL-WD Thumbturn Key locks & unlocks (use with DT trim) 9827TL 9927TL 374T X 990DT 1 11 /16" x 7 1 /2" x 7 /8" (43x191x22mm) Thumbturn Blank escutcheon always operable (no cylinder) (use with DT trim) 9827TL-BE 9927TL-BE 374T-BE X 990DT 1 11 /16" x 7 1 /2" x 7 /8" (43x191x22mm) Pull center to center 5 1 /2" (140mm) 5 1 /2" (140mm) Projection 2" (51mm) 2" (51mm) 3 1 /4" (83mm) 3 1 /4" (83mm) ANSI function or Cylinder type Rim Rim 1 1 /4" Mortise Handing Optional trim x990eo x996eo Optional #425 SNB quantity for device Product description x996k-dt x996l-dt x696dt x697dt x996k-nl x996l-nl x696nl x697nl Lever Key locks & unlocks 9827L 9927L Lever night latch Key retracts latchbolt 9827L-NL 9927L-NL Lever blank escutcheon Always operable (no cylinder) 9827L-BE 9927L-BE Lever dummy trim pull when dogged 9827L-DT 9927L-DT Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size L L-NL L-BE L-DT 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center Projection 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) ANSI function Cylinder type Rim Rim Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible Optional #425 SNB quantity for device * Electrified lever operation available 9827/9927 Surface mounted vertical rod device Notes Von Duprin 98/99 Series 21

68 Standard trim EO DT NL NL-OP TL TL-BE Product description No outside trim Exit only 9847EO 9947EO Dummy trim Pull when dogged (not recommended for fire device) 9847DT 9947DT Night latch Key retracts latchbolt 9847NL 9947NL Night latch Key retracts latchbolt optional pull required 9847NL-OP 9947NL-OP Thumbturn Key locks & unlocks (use with DT trim) 9847TL 9947TL Thumbturn Blank escutcheon always operable (no cylinder) (use with DT trim) 9847TL-BE 9947TL-BE Trim description 990DT 990NL-R/V 110NL-MD 376T X 990DT 374T-BE X 990DT Escutcheon plate size 3" x /16" x 3 /32" (76x360x2mm) 3" x /16" x 3 /32" (76x360x2mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center 5 1 /2" (140mm) 5 1 /2" (140mm) Projection 2" (51mm) 2" (51mm) 2" (51mm) 2" (51mm) ANSI function or Cylinder type Rim Rim 1 1 /4" Mortise Handing Optional trim x990eo x996eo Optional #425 SNB quantity for device Product description x996k-dt x996l-dt x696dt x697dt x996k-nl x996l-nl x696nl x697nl Lever Key locks & unlocks 9847L 9947LF Lever night latch Key retracts latchbolt 9847L-NL 9947L-NL Lever blank escutcheon Always operable (no cylinder) 9847L-BE 9947L-BE Lever dummy trim pull when dogged 9847L-DT 9947L-DT Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size L L-NL L-BE L-DT 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center Projection 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) ANSI function Cylinder type Rim Rim Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible Optional #425 SNB quantity for device * Electrified lever operation available 9847/9947 Concealed vertical rod device Notes Von Duprin 98/99 Series 29

69 Standard trim EO DT NL NL-OP TL TL-BE Product description Trim description Escutcheon plate size No outside trim Exit only 9857EO 9957EO Dummy trim Pull when dogged (not recommended for fire device) 9857DT 9957DT Night latch Key retracts latchbolt 9857NL 9957NL 990DT 990NL-R/V 3" x /16" x 3 /32" (76x360x2mm) 3" x /16" x 3 /32" (76x360x2mm) Night latch Key retracts latchbolt optional pull required 9857NL-OP 9957NL-OP 110NL-MD 110NL-WD Thumbturn Key locks & unlocks (use with DT trim) 9857TL 9957TL 374T X 990DT 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Thumbturn Blank escutcheon always operable (no cylinder) (use with DT trim) 9857TL-BE 9957TL-BE 374T-BE X 990DT 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center 5 1 /2" (140mm) 5 1 /2" (140mm) Projection 2" (51mm) 2" (51mm) 2" (51mm) 2" (51mm) ANSI function or Cylinder type Rim Rim 1 1 /4" Mortise Handing Optional trim x990eo x996eo Optional #425 SNB quantity for device Product description x996k-dt x996l-dt x696dt x697dt x996k-nl x996l-nl x696nl x697nl Lever Key locks & unlocks 9857L 9957LF Lever night latch Key retracts latchbolt 9857L-NL 9957L-NL Lever blank escutcheon Always operable (no cylinder) 9857L-BE 9957L-BE Lever dummy trim pull when dogged Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size L L-NL L-BE L-DT 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center Projection 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) ANSI function Cylinder type Rim Rim Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible Optional #425 SNB quantity for device * Electrified lever operation available 9857/9957 Three-point latching device Notes Von Duprin 98/99 Series 25

70 Standard trim EO DT NL HL Product description No outside trim Exit only 9875EO 9975EO Dummy trim Pull when dogged (not recommended for fire device) 9875DT 9975DT Night latch Key retracts latchbolt 9875NL 9975NL Trim description 990DT 990NL-M HL6M Escutcheon plate size 3" x 14 3 /16" x 3 /32" (76x360x2mm) 3" x 14 3 /16" x 3 /32" (76x360x2mm) Hospital latch Key locks & unlocks 9875HL 9975HL 2 9 /16" x 5 1 /2" x 2 5 /8" (65x140x67mm) Pull center to center 5 1 /2" (140mm) 5 1 /2" (140mm) Projection 2" (51mm) 2" (51mm) 2 5 /8" (67mm) ANSI function Cylinder type 1 1 /4" Mortise 1 1 /4" Mortise Handing Optional trim x990eo x996eo Optional #425 SNB quantity for device Product description x996k-dt x996l-dt) x696dt x697dt x996k-nl x996l-nl x696nl x697nl Lever Key locks & unlocks 9875L 9975L Lever night latch Key retracts latchbolt 9875L-NL 9975L-NL Lever blank escutcheon Always operable (no cylinder) 9875L-BE 9975L-BE Lever dummy trim pull when dogged 9875L-DT 9975L-DT Trim description 996L-M* 996L-NL-M 996L-BE-M* 996L-DT Escutcheon plate size L L-NL L-BE L-DT 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center Projection 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) ANSI function Cylinder type 1 1 /4" Mortise 1 1 /4" Mortise Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible Optional #425 SNB quantity for device * Electrified lever operation available 9875/9975 Mortise lock device Notes Von Duprin 98/99 Series 17

71 98/99 Optional trim Knob, exit only and thumbpiece trim 990 & 996K K K-NL K-BE K-DT EO TP TP-BE EO Trim options Trim description Escutcheon plate size Knob Key locks & unlocks Knob night latch Key retracts latchbolt Knob blank escutcheon Always operable (no cylinder) Knob dummy trim Pull when dogged Exit only plate Thumbpiece Key locks & unlocks Thumbpiece blank escutcheon Always operable (no cylinder) 996K 996K-NL 996K-BE 996K-DT 996EO 990TP 990TP-BE 990EO 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Exit only plate 3" x 14 3 /16" x 3 /32" 3" x 14 3 /16" x 3 /32" 3" x 14 3 /16" x 3 /32" (76x360x2mm) (76x360x2mm) (76x360x2mm) Pull center to center 5 1 /2" (140mm) 5 1 /2" (140mm) 5 1 /2" (140mm) Projection 3 1 /4" (83mm) 3 1 /4" (83mm) 3 1 /4" (83mm) 3 1 /4" (83mm) 2" (51mm) 2" (51mm) Z ANSI function Cylinder type Rim or vertical rod Rim Rim Rim device Mortise lock 1 device /4" Mortise 1 1 /4" Mortise 1 1 /4" Mortise Handing #425 SNB optional- HMD req WD w/o SLM pkg. #825 SNB req. WD w/o SLM pkg F Rim device ONLY #425 SNB req. w/499f Von Duprin 98/99 Series

72 Popular double door applications Single door applications Double door applications Single mortise lock device Single rim device Mortise lock and surface mounted or concealed vertical cable/rod device combination same direction Two rim devices with mullion same direction Two vertical rods double egress Door handing Left hand-reverse Right hand-reverse orientation orientation LHR RHR (Left hand-reverse) (Right hand-reverse) Outside Two surface mounted vertical rod devices same direction (do not use with overlapping astragal) Two fire exit hardware vertical cables/rods with auxilary fire latch-lbr option Two concealed vertical cables/rods Outside trim operation Trim operation lever or knob Standard Night latch Blank escutcheon Dummy Key locks and unlocks lever or knob. e.g., 996L (Classroom) Key retracts latch bolt. Lever or knob is rigid. Use NL suffix, e.g. 996LNL. (Storeroom) Lever or knob always active. Use BE suffix, e.g., 996L-BE. (Passage) Lever or knob rigid for pull operation. Use DT suffix, e.g., 996L-DT. 996L Breakaway lever The 996L Breakaway trim has become the standard lever trim offering on the 98L/99L Series devices. The Breakaway design is especially effective in areas where vandalism to door hardware is a problem. The design intent is to discourage costly repairs from becoming necessary. The Breakaway feature is not available on the NL (night-latch) or DT (dummy trim) versions. 374T/376T Series thumbturn control Standard operation, key locks and unlocks thumbturn. Optional operation, key unlocks thumbturn, re-locks when key is removed. This operation is created by changing the cylinder plate included with control. Use 1 1 /4" mortise cylinder with a straight cam. Schlage cam reference L Use with a pull trim (990DT pictured). 6 Von Duprin 98/99 Series

73 Lever styles Decorative levers M51 Knurling available M52 Knurling available M53 M54 M55 M56 M57 M61 (Handed) M62 (Handed) M63 (Handed) M81 Knurling available M82 M83 M84 M85 (Handed) Available in Stainless Steel substrate ONLY. Standard Levers Knurling available 03* Knurling available 05 06* Default lever Knurling available (Handed) 16 (Omega) 17* Knurling available 18 ACC (Accent) (Handed) AST (Asti) (Handed) MER (Merano) (Handed) LAT* Latitude LON* Longitude *Available in Stainless Steel - specify SS when ordering Von Duprin 98/99 Series 7

74 Quiet Electric Latch Retraction-QEL Featuring 98/99, 94/95 and 33A/35A series exit devices Overview Features and Benefits Quiet electric latch retraction (QEL) provides electronic control of an exit device for environments where limited operational noise is desired. The QEL option is Von Duprin s solution of choice for hospitals, libraries, museums and theaters where ambient noise can be disruptive. It is available on all Von Duprin 98/99, 94/95 and 33A/35A series exit devices. These devices always provide mechanical egress. The electrified latch retraction can also be activated by an access system or building automation system to unlatch the exit device momentarily. Often the QEL is used with a credential reader and access control system to unlock the door momentarily for authorized users. The QEL can also be configured to electronically retract the latch for an extended period of time to allow free entry. This is a convenient alternative to mechanical dogging. If manual dogging is required, the hex dogging option is available, to order specify HD-QEL. Special center case dogging is also available for 98/99 rim and vertical systems, specify SD-QEL. QEL option available on all 98/99, 94/95 and 33A/35A series exit devices Energy efficient motorized latch retraction utilizes standard 2 amp power supply, enabling longer wire runs from power source Quiet operation in both mechanical and electronic states Modular design allows for a simplified installation On-board installation and troubleshooting diagnostics built into device Auto adjust latch retraction automatically adjusts latch throw and pull Pushbar is pulled in electronically for quiter operation when dogged Vandal resistant detects and responds to events of attack and tampering The QEL option is available on panic devices and fire rated devices. Fire rated openings have several additional requirements. They must be self latching and self closing. To satisfy these requirements the QEL must be paired with an automatic operator and under the control of an automatic fire alarm system when used on fire rated openings.

75 Specifications Compliance Devices are BHMA Certified to ANSI/BHMA A156.3 (2001) Grade 1 for Exit Devices Devices are UL and cul Listed as Panic Hardware (UL 305) and as Fire Exit Hardware (UL 10C) The QEL Conversion Kit is UL Classified under Accessories for Single-Point Locks and Latches and Fire Exit Hardware (UL 10C) Electronic Specifications QEL electrical load Voltage Current 24 VDC 1.0 A Inrush (0.5 sec) 0.14 A Holding QEL wire run lengths Distance (one way) Wire gauge AWG AWG AWG AWG Accessories The QEL has a low in rush current, so it can be used with standard Schlage power supplies. Calculate the peak current draw of all devices in the system to determine the required amperage of the supply. Schlage PS902 Schlage PS904 Schlage PS906 up to 2 amps up to 4 amps up to 6 amps The 900-2RS option board designed to control two electric latch retraction devices and provide time delay between the firing of outputs is required. The power transfer is also sold separately. Please refer to Von Duprin catalog for more information on EPT-2/EPT-10 power transfers and PS900 series power supplies. How to order Standard Use prefix QEL, example QEL99L. Special Center Case Dogging Use prefix SD-QEL, example SD-QEL99L. Hex Dogging Use prefix HD-QEL, example HD-QEL99L. About Allegion Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security. As a $2 billion provider of security solutions for homes and businesses, Allegion employs more than 8,000 people and sells products in more than 120 countries across the world. Allegion comprises more than 25 global brands, including strategic brands CISA, Interflex, LCN, Schlage and Von Duprin. For more, visit Allegion , Rev. 10/14 allegion.com

76

77

78 Cylinders Cylinders Cylinders are not furnished with device or trim and must be specified when ordering. Refer to exit device catalogs for cylinder requirements. Mortise 3215 (Schlage , B cam) RG-27 Vertical rod and latch guard RG-27 Series vertical rod and latch guards protect the bottom rods of exit devices from the damaging impacts of carts or gurneys passing through doors. (If bottom rods become damaged, the exit device will not function as intended and can jeopardize the ability to exit safely during an emergency.) 36" (914 mm) In addition to protecting the vertical rod, the guard provides a smooth, unobstructed surface so the door can be pushed open easily with the bumpers of a wheelchair. The latch guard portion is 10" high. The standard latch guard features a 45 ramp. The extended latch guard offers a continuous ramp in 3' or 4' widths. All stainless steel construction in US32D finish. Latch guards can cover latches as large as 1 1 /4"W x 10"H x 1 7 /8" projection. Rod guard Extended latch guard Latch guard Cylinders Rim 3216 (Schlage cam) 10" 12" 3' or 4' 4 3/8" 21/4" 3' = 33 1/8" 4' = 45 1/8" Models RGO Rod guard only (Projection 1 3 /16") 3218 Dummy Glass bead kit GBK Glass bead conversion kits are used on doors with glass beads. Each kit consists of 1 1 /4" (6mm) shim sets. GBK for Surface Vertical Rod ships with 1 1 /8" (3mm) shims for rod guides. Shims are not required for top and bottom latches To order, specify: 1. Device Model. Example: 99GBK 2. Device type (rim, mortise, surface vertical rod, concealed vertical rod) 3. Wood door, when used with concealed vertical rod 4. Specify if using with 499F Strike 5. Finish RG-27 Rod and latch guard RG ' (914 mm) Rod guard and extended latch guard RG ' (1219 mm) Rod guard and extended latch guard LGO Latch guard only LGO-3 3' (914 mm) Extended latch guard only LGO-4 4' (1219 mm) Extended latch guard only Note: Not for use on wood fire doors, except with SLM (special laminate material) blocking. To order, specify: 1. Model number. 2. Handing (except on RGO). 3. Door material if other than Hollow Metal. 4. Optional sex bolt mounting available. 10 Von Duprin auxiliary hardware and general information

79 9847/9947 Concealed vertical rod device Top Latch 338 Top Strike 9847/9947 Concealed vertical rod device for use on single or double metal doors, UL listed for panic exit hardware. Devices are ANSI A Grade 1. The 9847 device has a smooth mechanism case and the 9947 device has a grooved case. The concealed vertical rod device is non-handed except when the following device options are used: SD (special dogging), or SS (signal switch). See opposite page for available outside trim and device functions. Finishes US3, US3A, US4, US4A, US10, US26, US26D, US26D-AM Antimicrobial, US28, 313, 315 & 643E. US15 and US32D available with 98 Series only. 385A Bottom Strike 9847/9947 Concealed vertical rod device Specifications Device functions Device ships EO/DT/NL. Field selectable. For TP, K or L remove NL drive screw from device. Device lengths 2' 2' (610 mm) Door size 3' 2'4' to 3' (711mm to 914 mm) Door size 4' 2'10" to 4' (864 mm to 1219 mm) Door size Device centerline from finished floor 39 5 /8" (1006 mm) Standard Adjustable from 35 5 /8" (905mm) to 49 5 /8" (1260mm) Center case 8" x 2 3 /4" x2 3 /8" (203mm x 70mm x 60mm) dimensions Mechanism case 2 1 /4" x 2 1 /4" (57mm x 57mm) dimensions Projection Pushbar neutral 3 13 /16" (97 mm) Pushbar depressed 3 1 /16" (78 mm) Latch bolt Deadlocking top & bottom bolt, 5 /8" (16mm) throw Door undercut 1 /4" (7mm) recommended Top & bottom 4 1 /2" x 2 1 /8" x 1 1 /2" (114mm x 54mm x 38mm) Latch case Vertical rods Round 2-piece adjustable rods Top rod adjustable from 6'8" (2027mm) to 8'4"(2533mm). Bottom rod adjustable 35 5 /8" (905 mm) to 49 5 /8" (1260 mm). Extension rod kits available for doors over 8'4" (2533mm). Fasteners & sex bolts (SNB) Includes screw pack for 1 3 /4" (44mm) to 2 1 /4" (57mm) thick metal doors. Optional 425 SNB available. Electric options LX Latchbolt monitor switch RX Pushpad monitor switch RX2 Double pushpad monitor switch E Electric unlocking and locking trim EL Electric latch retraction QEL Quiet electric latch retraction SS Signal switch CX Chexit delayed exit ALK Alarm exit kit WP-RX Waterproof request to exit CON Allegion Connect Mechanical GBK Glass bead kit options PN Pneumatic latch retraction LBR Less bottom rod PL Pullman latch SNB Sex bolts SEC Security screws Dogging feature Hex key dogging standard Dogging option CD Cylinder dogging SD Special center case dogging LD Less dogging DI Dogging indicator CI Cylinder dogging indicator Strikes Top Unfinished, Bottom 385A - Unfinished QEL Quiet electric latch retraction Bolt retraction via switch Converts exit door to push-pull operation CX Chexit delayed exit Meets NFPA 101 requirements Self-contained controls, locking, alarm EL Electric latch retraction Enables remote unlatching Alternative to manual dogging E (E996L) Electrified breakaway lever Electrified remote locking/unlocking Standard in fail safe condition PN Pneumatic latch retraction For areas where electrical devices banned Special linkage for mechanical or pneumatic dogging Bottom Latch Hex key dogging comes standard on 9847/9947 Concealed vertical rod devices RX Pushpad monitor switch Signals use of an opening SPDT switch to monitor pushpad CON Allegion Connectors Common connectors to connect various door hardware all the way to the power supply ALK Alarm exit kit Unauthorized opening triggers 85-decibel horn Set in armed or disarmed mode by key LX Latchbolt monitor switch Signals use of an opening SPDT switch to monitor latch bolt DI Dogging indicator Monitor dogging status without a control panel Red indicator light shows visibility to dogging from over 75 feet 28 Von Duprin 98/99 Series

80 Standard trim EO DT NL NL-OP TL TL-BE Product description No outside trim Exit only 9847EO 9947EO Dummy trim Pull when dogged (not recommended for fire device) 9847DT 9947DT Night latch Key retracts latchbolt 9847NL 9947NL Night latch Key retracts latchbolt optional pull required 9847NL-OP 9947NL-OP Thumbturn Key locks & unlocks (use with DT trim) 9847TL 9947TL Thumbturn Blank escutcheon always operable (no cylinder) (use with DT trim) 9847TL-BE 9947TL-BE Trim description 990DT 990NL-R/V 110NL-MD 376T X 990DT 374T-BE X 990DT Escutcheon plate size 3" x /16" x 3 /32" (76x360x2mm) 3" x /16" x 3 /32" (76x360x2mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center 5 1 /2" (140mm) 5 1 /2" (140mm) Projection 2" (51mm) 2" (51mm) 2" (51mm) 2" (51mm) ANSI function or Cylinder type Rim Rim 1 1 /4" Mortise Handing Optional trim x990eo x996eo Optional #425 SNB quantity for device Product description x996k-dt x996l-dt x696dt x697dt x996k-nl x996l-nl x696nl x697nl Lever Key locks & unlocks 9847L 9947LF Lever night latch Key retracts latchbolt 9847L-NL 9947L-NL Lever blank escutcheon Always operable (no cylinder) 9847L-BE 9947L-BE Lever dummy trim pull when dogged 9847L-DT 9947L-DT Trim description 996L-R/V* 996L-NL-R/V 996L-BE-R/V* 996L-DT Escutcheon plate size L L-NL L-BE L-DT 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) 2 3 /4" x 10 3 /4" x 27 /32" (70x273x21mm) Pull center to center Projection 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) 2 7 /8" (73mm) ANSI function Cylinder type Rim Rim Handing Handed/Reversible Handed/Reversible Handed/Reversible Handed/Reversible Optional #425 SNB quantity for device * Electrified lever operation available 9847/9947 Concealed vertical rod device Notes Von Duprin 98/99 Series 29

81 98/99 Finishes A. Center case cover B. Touch bar end cap C. Touch bar trim D. Cover plate E. Mechanism end cap F. Mechanism case Finishes Color US number BHMA number A, B, E C D & F Bright brass US3 605 Bright brass Bright brass US3, 605 Buffed anodized Satin brass US4 606 Bright brass Satin brass US4, 606 Anodized Satin bronze US Plated Satin bronze US10, 612 Anodized Bright chrome US Plated Bright stainless steel US32, 629 Buffed anodized Satin chrome US26D 626 Plated Satin stainless steel US32D, 630 Anodized Satin stainless steel * US32D 630 Stainless steel Satin stainless steel US32D, 630 Anodized Aluminum, anodized US Powder coat Satin stainless steel US32D, 630 Anodized Duranodic dark bronze Powder coat Powder coat Powder coat Black Powder coat Powder coat Powder coat Aged bronze 643E Relieved aged bronze Relieved aged bronze Special Finishes Color US number BHMA number Aged bronze, no relief A, B, E C D & F Satin bronze, oil-rubbed US10B 613 Oil-rubbed, US10B Oil-rubbed, US10B Powder coat Powder coat ** RAL # Powder coat Satin stainless steel US32D, 630 (unless specified to match device) Powder coat Bright bronze US9 611 Plated Bright bronze US9, 611 Buffed anodized Satin nickel * US Plated, clear powder Satin stainless steel US32D Anodized Satin chrome (antimicrobial) Satin stainless steel (antimicrobial) U26D-AM 626-AM AM Clear over chrome US32D-AM 630-AM AM Clear over stainless steel AM Clear over satin stainless steel US32D, 630 AM Clear over Satin Stainless Steel US32D, 630 AM Clear over anodized AM Clear over anodized Finishes Touch bar trim options Knurled Embossed Push Braille (Caution-Stairwell), satin stainless steel only RSS, US32D only, red silk screen lettered EMERGENCY EXIT ONLY PUSH TO OPEN AND SOUND ALARM. * US32D and US15 available on 98 Series only ** Other custom logo touchbar trim and RAL color combinations available - consult factory 77 Von Duprin 98/99 Series 77

82 98/99 Finishes Finishes* Color US number BHMA number Color US number BHMA number Chromium, polished US Bronze, dull US Anodized, aluminum US Satin nickel Available for 35A ONLY US Chromium, dull US26D 626 Satin stainless steel US32D 630 Brass, polished US3 605 Duranodic dark bronze Finishes Brass, dull US4 606 Black Aged bronze 643e Special finishes Color US number BHMA number Satin chrome, Antimicrobial US26D- AM 626-AM Satin stainless steel, antimicrobial US32D- AM 630-AM Pushpad options Knurled Embossed Push Braille (Caution-Stairwell), satin stainless steel only RSS (Emergency Exit Push to open and sound alarm) Red Silkscreen lettering on US32D * Note: Durable powder coated finishes available at specific special request. PLEASE CONTACT FACTORY Von Duprin 98/99 Series

83 98/99 Strike information Strikes for rim devices F 499F 1408 Projection 9 /16" (14mm) Projection 13 /16" (21mm) Projection 13 /16" (21mm) Projection 15 /16" (24mm) One per pair of doors 1439 Blade stop 1410 Integral stop Projection 1 /2" (13mm) Projection 1 /2" (13mm) Projection 3 /8" (10mm) Panic devices only Requires coordinator For panic exit application only, not fire rated XP Strikes for rim devices Projection 13 /16" (21mm) Projection 7 /8" (22mm) - For fire rated double door applications Strikes for vertical rod devices 248L-4 260U-Flush transom panic only 260U-F-Flush transom fire only Strikes for vertical cable devices Top 249 strike Bottom strike 1" (25 mm) ⁹ ₁₆" (14 mm) 1¹ ₂" (38 mm) ¹ ₈" (3 mm) Projection 9 /16" (14mm) Projection 3 /8" (10mm) Projection 3 /8" (10mm) Projection 13 /16" (21mm) 1¹⁹ ₃₂" (40 mm) ¹ ₈" (3 mm) 2³ ₄" (70 mm) Projection 1 /8" (3mm) F 499F Projection 13 /16" (21mm) Projection 15 /16" (24mm) Strike options / Dogging options 304L A 283 Projection 13 /16" (21mm) Mortise 5 /8" (16mm) Mortise 2 1 /2" (64mm) For use with WDC devices when used with wood frames Strikes for mortise lock devices A 576B. Not for use with astragals For use on wood doors, contact door manufacturer Acceptable for 90 minute pair of hollow metal doors Von Duprin 98/99 Series 59

84 98/99 Strike/Stile information Device type Standard single door Strike Standard double door Optional single door Optional double door Strike Trim/Stile w/ mullion* Trim/Stile Strike Trim/stile Strike w/mullion* Trim/Stile 990/ / / / / / / /697 Strike options / Dogging options 98/ XP 98/ F/99-F 299F XP98-F/XP99-F F 9975-F F 9957-F Latch retraction PL9827/PL9927 Pullman latch 9827-F 9927-F F 9947-F 9848-F 9948-F 9847WDC 9947WDC 9847WDC-F 9947WDC-F F 9949-F 9849-F 9949-F 9850WDC 9950WDC 9850WDC-F 9950WDC-F (Top) 299 (Middle) 304L/284-L (Bottom) 299 (Top) 299F (Middle) 304L (Bottom) 4 1 /2" (114mm) 4 1 /2" (114mm) 4 1 /2" (114mm) 4 1 /2" (114mm) 4 3 /8" (111mm) 4 3 /8" (111mm) 4 3 /8" (111mm) 4 3 /8" (111mm) 299 x /8" (124mm) 909 x 4954-XP 499F x /8" 954 x (124mm) 9954-XP 1439 or /16" (97mm) 4 1 /16" (103mm) 3 13 /16" (97mm) 299 x /16" (113mm) 1408 x /16" (97mm) 3 15 /16" (100mm) 1606 x /8" (112mm) 499F x 9854 KR A-576B A-576B 299 x F 499F x L 4 7 /8" (124mm) 4 7 /8" (124mm) 1439 or /16" (97mm) 4 1 /16" (103mm) 3 13 /16" (97mm) 299 x /16" (113mm) 1408 x /16" (97mm) 3 15 /16" (100mm) 1606 x /8" (112mm) 4 1 /4" (108mm) 3 13 /16" (97mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 3 13 /16" (97mm) 4 1 /4" (108mm) Strike Application Trim/Stile Optional strike Application Trim/Stile 990/ / / / (Top) 304L/248-L-4 (Bottom) 299 (Top) 304L/248-L-4 (Bottom) 299 (Top) 304L (Bottom) 338 (Top) 385A (Bottom) 338 (Top) 385A (Bottom) 338 (Top) 385A (Bottom) 338 (Top) 385A (Bottom) 249 (Top) 349 (Bottom) 249 (Top) 349 (Bottom) 150 (Top) 450 (Bottom) 150 (Top) 450 (Bottom) Single door Two vertical rod devices Vertical rod with Mortise lock device Two vertical rods Vertical rod with Mortise lock device Single door Two vertical rod devices Vertical rod with Mortise lock device Two vertical rod devices Vertical cable with Mortise lock device Two vertical cables Vertical cable with Mortise lock device Single door Two vertical cable devices Vertical cable with Mortise lock device Two vertical cable devices 3 11 /16" (94mm) 3 11 /16" (94mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 3 5 /8" (92mm) 3 5 /8" (92mm) 4 1 /8" (105mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 260U (Top) 385A (Bottom) 260U (Stainless) 385A (Bottom) 304L (Bottom) 304L (Bottom) 304L Single door Two vertical rod devices Vertical rod with Mortise lock device Two vertical rods Vertical rod with Mortise lock device Single door Two vertical rod devices Vertical rod with Mortise lock device 4 1 /4" (108mm) 304L Two vertical rod devices 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) 4 1 /4" (108mm) Vertical cable with Mortise lock device Two vertical cable Vertical cable with Mortise lock device Single door Two vertical Cable devices Vertical cable with Mortise lock device 3 11 /16" (94mm) 3 11 /16" (94mm) 3 5 /8" (92mm) 3 5 /8" (92mm) 4 1 /4" 4 1 /8" (108mm) (105mm) 4 1 /4" 4 1 /4" (108mm) (108mm) 4 1 /4" 4 1 /4" (108mm) (108mm) 4 1 /4" 4 1 /4" (108mm) (108mm) 4 1 /4" 4 1 /8" (108mm) (105mm) 4 1 /4" 4 1 /4" (108mm) (108mm) 4 1 /4" 4 1 /4" (108mm) (108mm) Two Vertical 4 1 /4" (108mm) 4 Cable 1 /4" 4 1 /4" (108mm) (108mm) Devices Von Duprin 98/99 Series

85 98/99 Function, grade, type options ANSI Function, grade & type Function Grade 1, type 1 Grade 1, type 2 Grade 1, type 3 Grade 1, type 7 Grade 1, type 7 Grade 1, type 8 Grade 1, type 8 Grade 1, type 8 Grade 1, type EO & F 99EO & F 9827EO & F 9927EO & F 9875EO & F 9975EO & F 9847WDCEO & F 9947WDCEO & F 9850WDCEO & F 9950WDCEO & F 9847EO & F 9947EO & F 9848EO & F 9948EO & F 9849EO & F 9949EO & F 9857EO & F 9957EO & F 2 98DT 99DT 9827DT 9927DT 9875DT 9975DT 9847WDCDT 9947WDCDT 9850WDCDT 9950WDCDT 9847DT 9947DT 9848DT 9948DT 9849DT 9949DT 9857DT 9957DT 3 98NL & F 99NL & F 9827NL & F 9927NL & F 9875NL & F 9975NL & F 9847WDCNL & F 9947WDCNL & F 9850WDCNL & F 9950WDCNL & F 9847NL & F 9947NL & F 9848NL & F 9948NL & F 9849NL & F 9949NL & F 9857NL & F 9957NL & F 3 98K-NL & F 9827K-NL & F 99K-NL & F 9927K-NL & F 3 98L-NL & F 99L-NL & F 9827L-NL & F 9927L-NL & F 9875K-NL & F 9847WDCK-NL & F 9850WDCK-NL & F 9847K-NL & F 9975K-NL & F 9947WDCK-NL & F 9950WDCK-NL & F 9947K-NL & F 9875L-NL & F 9975L-NL & F 9847WDCL-NL & F 9947WDCL-NL & F 9850WDCL-NL & F 9847L-NL & F 9950WDCL-NL & F 9947L-NL & F 9848K-NL & F 9849K-NL & F 9857K-NL & F 9948K-NL & F 9949K-NL & F 9957K-NL & F 9848L-NL & F 9948L-NL & F 9849L-NL & F 9857L-NL & F 9949L-NL & F 9957L-NL & F 5 98TP & F 99TP & F 9827TP & F 9927TP & F 9875TP & F 9975TP & F 9847WDCTP & F 9947WDCTP & F 9850WDCTP & F 9950WDCTP & F 9847TP & F 9947TP & F 9848TP & F 9948TP & F 9849TP & F 9949TP & F 9857TP & F 9957TP & F 7 98TP-2 & F 99TP-2 & F 9875TP-2 & F 9975TP-2 & F 8 98K & F 99K & F 9827K & F 9927K & F 9875K & F 9975K & F 9847WDCK & F 9947WDCK & F 9850WDCK & F 9950WDCK & F 9847K & F 9947K & F 9848K & F 9948K & F 9849K & F 9949K & F 9857K & F 9957K & F 8 98L & F 99L & F 9827L & F 9927L & F 9875L & F 9975L & F 9847WDCL & F 9947WDCL & F 9850WDCL & F 9950WDCL & F 9847L & F 9947L & F 9848L & F 9948L & F 9849L & F 9949L & F 9857L & F 9957L & F 10 98K-2 & F 99K-2 & F 10 98L-2 & F 99L-2 & F TL & F 9927TL & F 14 98K-BE & F 9827K-BE & F 99K-BE & F 9927K-BE & F 14 98L-BE & F 99L-BE & F 9827L-BE & F 9927L-BE & F TL-BE & F 9927TL-BE & F 9875K-2 & F 9975K-2 & F 9875L-2 & F 9975L-2 & F 9847WDC & F 9947WDC & F 9850WDC & F 9950WDC & F 9847TL & F 9947TL & F 9875K-BE & F 9847WDCK-BE & F 9850WDCK-BE & F 9847K-BE & F 9975K-BE & F 9947WDCK-BE & F 9950WDCK-BE & F 9947K-BE & F 9875L-BE & F 9975L-BE & F 9847WDCL-BE & F 9947WDCL-BE & F 9847WDC & F 9947WDC & F 9850WDCL-BE & F 9847L-BE & F 9950WDCL-BE & F 9947L-BE & F 9850WDC & F 9950WDC & F 9848 & F 9948& F 9849 & F 9949& F 9857TL & F 9957TL & F 9848K-BE & F 9849K-BE & F 9857K-BE & F 9948K-BE & F 9949K-BE & F 9957K-BE & F 9848L-BE &F 9948L-BE & F 9847TL-BE & F 9848 & F 9947TL-BE & F 9948 & F 9849L-BE &F 9857L-BE & F 9949L-BE & F 9957L-BE & F 9849 & F 9949 & F 9857TL-BE & F 9957TL-BE & F Additional information Dimensions 75 Von Duprin 98/99 Series 75

86 Electrical power transfer Overview Features and benefits Electric power transfer provides a means of transferring electrical power from a door frame to the edge of a swinging door. The units are completely concealed when the door is in the closed position, and are ideally suited for installations involving abuse or heavy traffic. Two models are available; EPT-2, two 18 gauge wires and EPT-10, ten 24 gauge wires. UL Listed for use on fire doors UL listed as Miscellaneous Door Accessory Ball-and-socket joint construction provides cut and pinch protection for wiring Built for heavy traffic and high abuse openings

87 Door applications Up to 5" butt hinges 180 o swing " butt hinges 130 o swing. 6 butt hinges 110 o swing. 3 4" offset pivots 180 o swing. Not for use with swing clear hinges, center-hung pivots, pocket pivots or balanced doors. Door applications shown are for 1 ¾" door thickness, for all other applications contact Technical Support to confirm compatibility. Finishes SP28 (sprayed aluminum) SP313 (sprayed duranodic) Dimensions Housing EPT-2 EPT-10 PNT-1 9" X X (229mm X 32mm X 38mm) Two 18 gauge wires, up to 2 24VDC, with a 16 AMPS maximum surge Ten 24 gauge wires, up to 1 24VDC, with a 16 AMPS maximum surge 5/32" tubing To order, specify EPT-2, EPT-10 or PNT-1. Finish, SP28 or SP313. About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit Allegion , Rev. 04/16

88 6200 Series Strikes for mortise or cylindrical devices Overview Features and benefits Von Duprin electric strikes are known for their reliability, durability and security. The 6200 Series strikes are designed to withstand abuse. Their heavy-duty stainless steel construction is fully UL1034 and UL10C listed and meets ANSI/BHMA Grade Series electric door strikes are designed for use with a variety of mortise or cylindrical locksets. Electrified strikes allow remote release of a locked door by activating a movable lip (keeper) using an entry/exit button or credential reader and can be a cost effective means for managing access Series strikes come standard as 24 VDC in fail secure mode. 12 VDC and AC operation can be selected, as can fail safe mode and other options that enable you to configure these strikes to fit your exact needs. Use 6200 Series electric strikes for retrofit applications or new construction. To assure the proper selection of an electric strike on new applications, lockset compatibility charts are shown on the next page. When using a lockset not listed or when retrofitting a strike to an existing application, please contact Von Duprin Technical Support for application assistance. 17 configurations available for cylindrical and mortise applications Heavy-duty stainless steel construction 24 VDC standard with 12, 16 and 28 VDC operation optional Two-piece plug connectors are furnished for ease of installation and removal during strike servicing Options include rectifier kit for VAC to VDC conversion, dual monitor switches, entry buzzer and Allegion Connect wire extension Six popular finishes available to suite with existing hardware Suitable for interior and exterior doors UL 10C 3-hour fire-rated (fail secure only) UL 1034 listed for burglary-resistant electric door strikes Meets ANSI/BHMA A156.31, Grade 1 for endurance and dynamic strength Meets ANSI/BHMA A156.31, Grade 1, 1500 lbs static strength Dynamic strength 70 ft-lbs Endurance 1,000,000 cycles

89 6200 Series power requirements Models Voltage Current Duty Amps Ohms All 12V DC Continuous All 16V DC Continuous All 24V DC Continuous All 28V DC Continuous Continuous duty = Energized 1 minute or more Wiring AC Mortise lockset compatibility 1, , 6211AL, 6211WF, 6212, 6213, 6214, 6215, 6221, 6222, 6223, 6224, 6224AL, 6225 and 6226 strikes Manufacturer Model number Von Duprin 7500 Adams Rite 4510, 4710 AC with Buzzer Baldwin 6000 Best 24H, 30H Corbin 9000 Falcon M2300, M2500, M2600, M3300, M3500, M3600 Precision Russwin Mortise Mortise Sargent 7700, 8100, 9000 Schlage L9000, K30, K40, K50, K60 DC Yale 7030, 7130, 8600, 8700 Mortise lockset compatibility 1, Manufacturer Model number Von Duprin 7500 Best 30H (not 45H/47H) Corbin/Russwin ML2200, 5000, 9000, CR2200 (not 2000) Falcon M100, M200, M300, M400, M500, M600 Sargent 7700, 8100 (not 7800/8200) DC with Buzzer Schlage L9000 Yale 8700 (not 8800) Cylindrical lockset compatibility 1, , 6211AL, 6211WF, 6212, 6213, 6214, 6215, 6221, 6222, 6223, 6224, 6224AL, 6225 and 6226 strikes Manufacturer Baldwin Cylindrical latchbolt projection 1 2" 3 4" (13 mm 19 mm) Best 3 8" 3 4" (10 mm 19 mm) 2 Corbin Falcon Russwin Sargent 1 2" 3 4" (13 mm 19 mm) 1 2" 3 4" (13 mm 19 mm) 1 2" 3 4" (13 mm 19 mm) 1 2" 3 4" (13 mm 19 mm) Optional DS (FSE Shown) Schlage 3 8" 3 4" (10 mm 19 mm) 2 Yale Note: 1 2" 3 4" (13 mm 19 mm) When using device not listed or when retrofitting a strike to an existing application, please contact Von Duprin Technical Support for application assistance. 1. Von Duprin cannot guarantee compatibility, as other manufacturer s designs may change without notice. 2. Signalling may not function when using 3 8 (10 mm) throw bolt. Deadlocking cannot be guaranteed with all locks. 3. When using a lockset not listed or when retrofitting a strike to an existing application, please contact Von Duprin Technical Support for assistance. Von Duprin 6200 Series

90 Model specifications Model number AL 6211WF 6212 Retrofits model N/A VD 3140 FA 712 FA 722 FA 732 VD 3146 Latchbolt throw 3 / 4 " 3 / 4 " 3 / 4 " 3 / 4 " 3 / 4 " Face plate length 4 7 / 8 " 4 7 / 8 " 4 7 / 8 " 4 7 / 8 " 6 3 / 8 " Backbox depth 1 3 / 4" 1 11 / 16" 1 11 / 16" 4 1 / 2 " 1 21 / 32" Lockset Mortise without deadbolt Mortise with deadbolt 1" throw Cylindrical --- Number of doors Door and frame type Single Pair Hollow metal Aluminum --- Wood Options DS or DS-LC (dual monitor switches) EB (entry buzzer - fail-secure only) 28 VDC AC rectifier kit 16 VDC solenoid Certifications UL1034 UL10C 3 hour 3 hour 3 hour 3 hour 3 hour ANSI/BHMA Meets Grade 1, 1500 lbs static strength; 70 ft lbs dynamic strength; 1,000,000 cycles endurance Application Notes Application notes: 1. For use in ANSI prep at standard height. Strike pocket inserts are provided to accommodate different manufacturers deadlocking trigger locations. 2. Designed to replace Folger Adams 732. Wood frame horizontal solenoid location differs from Folger Adams. Requires additional frame prep when retrofitting. 3. Fits modified ANSI cutout. Designed to replace Von Duprin Von Duprin 6200 Series

91 Model specifications Model number 6212WF Retrofits model N/A VD 3041, 3042, 3061, 3062 FA FA FA VD 3071 VD 3072 Latchbolt throw 3 / 4 " 3 / 4 " 3 / 4 " 3 / 4 " 3/4 " 3/4 " Face plate length 6 3 / 8 " 6" 9" 9" 9" 6" Backbox depth 4 1 / 2 " 2 1 / 2 " 2" 1 5 / 8 " 2 7 / 8" 4 3 / 4 " Lockset Mortise without deadbolt Mortise with deadbolt 1" throw Cylindrical --- Number of doors Door and frame type Single --- Pair Hollow metal --- Aluminum --- Wood See note 1 below Options DS or DS-LC (dual monitor switches) EB (entry buzzer - fail-secure only) 28VDC AC rectifier kit 16VDC solenoid Certifications UL1034 UL10C 3 hour 3 hour 3 hour 3 hour 3 hour 3 hour* ANSI/BHMA Meets Grade 1, 1500 lbs static strength; 70 ft lbs dynamic strength; 1,000,000 cycles endurance Application notes * When pair door has inactive leaf. Application notes: 1. Includes wood frame for retrofit applications. 2. Deadbolt must be manually operated. 3. Open back electric strike for use on 1 3 4" (44 mm) thick double door applications " (120 mm) minimum stile required. For a concealed vertical rod and mortise device combination, specify A backbox. Von Duprin 6200 Series

92 Model specifications Model number AL Retrofits model FA /4 OB VD 3091 VD 3092 FA /4 FA 310-2RF FA OB FA Latchbolt throw 3/4 " 3/4 " 3/4 " 3/4 " 3/4 " 3/4 " Face plate length 9" 6" 9" 9" 9" 9" Backbox depth 2" 4 1 / 2 " 2" 1 5 / 8 " 1 5 / 8 " 1 5 / 8 " Lockset Mortise without deadbolt Mortise with deadbolt 1" throw Cylindrical Number of doors Door and frame type Single Pair Hollow metal --- Aluminum Wood Options DS or DS-LC (dual monitor switches) EB (entry buzzer - fail-secure only) 28VDC AC rectifier kit 16VDC solenoid Certifications UL1034 UL10C 3 hour* 3 hour* 3 hour* 3 hour* 3 hour* 3 hour* ANSI/BHMA Meets Grade 1, 1500 lbs static strength; 70 ft lbs dynamic strength; 1,000,000 cycles endurance Application notes * When pair door has inactive leaf. Application notes: 1. Open back electric strike for use on 1 3 4" (44 mm) thick double door applications 2. Closed back electric stirke for use on 1 3 4" (44 mm) thick double door applications " (120 mm) minimum stile required. For a concealed vertical rod and mortise device combination specify A backbox. 3. Closed back electric strike for use on 1 3 4" (44 mm) or 2 1 4" (57 mm) thick double door applications. 4. Closed back electric strike for use on 1 3 4" (44 mm) or 2 1 4" (57 mm) thick aluminum double door applications. 5. Open back electric stirke for use on 1 3 4" (44 mm) thick double door applications. 6. Closed back electric strike for use on 1 3 4" (44 mm) or 2 1 4" (57 mm) thick double door applications. Von Duprin 6200 Series

93 Dimensions WF 1 1 /4" (32mm) 1 9 /16" (38mm) 1 3 /4" (44mm) 1 1 /4" (32mm) 1 15 /32" (37mm) 4 1 /2" (114mm) 4 7 /8" (124mm) 1 3 /8" (35mm) 7 /8" (22mm) 1 /2" (13mm) 3 3 /8" (86mm) 3 1 /4" (83mm) 1 /8" (3mm) 12" (305mm) 6 3 /8" (162mm) 7 /8" (22mm) 1 /2" (13mm) 2 1 /16" (52mm) 3 3 /8" (86mm) 1 /8" (3mm) Minimum Clearance 3 9 /16" (90mm) /4" (32mm) 1 11 /16" (43mm) 1 15 /32" (37mm) 2 3 /16" (56mm) 1 1 /4" (32mm) 2 1 /2" (64mm) 4 7 /8" (124mm) 7 /8" 1 1 (22mm) /4" (32mm) 1 /2" (13mm) 3 3 /8" (86mm) 2 1 /16" (52mm) 1 /8" (3mm) 12" (305mm) Minimum Clearance 6" (152mm) 1 " (25mm) 1 1 /4" (32mm) 3 7 /8" (98mm) 1 3 /8" (35mm) 1 /4" (6mm) 4 1 /2" (114mm) Minimum Clearance 6211AL /4" (32mm) 1 11 /16" (43mm) 1 15 /32" (37mm) 1 3 /8" (35mm) 2" (51mm) 1 5 /8" (41mm) 4 7 /8" (124mm) 7 /8" (22mm) 1 1 /4" (32mm) 1 /2" (13mm) 3 3 /8" (86mm) 2 1 /6" (52mm) 1 /8" (3mm) 12" (305mm) Minimum Clearance 9" (229mm) 1" (25mm) 11 /16" (17mm) 3 3 /4" (95mm) 1 5 /8" (41mm) 5 /32" (4mm) 12"(305mm) Minimum Clearance 6211WF /4" (32mm) 1 15 /32" (37mm) 1 3 /8" (35mm) (38mm) 4 1 /2" (114mm) (41mm) 4 7 /8" (124mm) 7 /8" (22mm) 3 3 /8" (86mm) 2 1 /6" (52mm) 1 /8" (3mm) 3 9 /16" (90mm) Minimum Clearance 9" (229mm) 1" (25mm) 11 /16" (17mm) 1 5 /8" (41mm) (95mm) (4mm) (305mm) /4" (32mm) 1 15 /32" (37mm) 1 11 /16" (43mm) 1 3 /8" (35mm) 1" (25mm) 3 5 /32" (80mm) 2 7 /8" (73mm) 6 3 /8" (162mm) 7 /8" (22mm) 1 /2" (13mm) 1 /2" (13mm) 3 3 /8" (86mm) 2 1 /16" (52mm) 1 /8" (3mm) 12" (305mm) Minimum Clearance 9" (229mm) 5 3 /8" (137mm) 3 3 /4" 1 5 (95mm) /8" (41mm) 3 /4" (19mm) 5 /32" (4mm) 6 1 /8" (156mm) Minimum 15 /16" Clearance (24mm) Von Duprin 6200 Series

94 Dimensions AL 6 " (152mm) 3 7 /8" (98mm) 1 7 /16" (37mm) 1 1 /4" (32mm) 4 1 /2" (114mm) 3 7 /8" (98mm) Minimum Clearance 9" (229mm) 1" (25mm) 1 3 /8" (35mm) 1 5 /8" (41mm) 1 1 /2" (38mm) 1 5 /8" (41mm) 3 3 /4" (95mm) 1 5 /8" (41mm) 12"(305mm) Minimum Clearance 1 3 /4" (44mm) 1 1 /4" (32mm) 11 /16" (17mm) 5 /32" (4mm) /16"(41mm) 2"(51mm) 2 1 /16"(22mm) 1 1 /2"(38mm) 9" (229mm) 1 5 /8" (41mm) 1 5 /8" (41mm) 12"(305mm) Minimum Clearance 3 3 /4" (95mm) 9" (229mm) 1 5 /8" (41mm) 1 5 /8" (41mm) 3 3 /4" (95mm) 12"(305mm) Minimum Clearance 1 3 /8" (35mm) 1 3 /8" (35mm) 5 /32"(4mm) /4" (32mm) 4 1 /2" (114mm) 1 3 /8" (35mm) 1 1 /2" (38mm) 1 5 /8" (41mm) 6" (152mm) 1" (25mm) 1 3 /4" (44mm) 3 7 /8" (98mm) 1 3 /8" (35mm) 1 /4" (6mm) 3 7 /8"(98mm) Minimum Clearance 9" (229mm) 1" (25mm) 11 /16" (17mm) 1 5 /8" (41mm) 3 3 /4" (95mm) 5 /32" (4mm) 12"(305mm) Minimum Clearance /8" (35mm) 2" (51mm) 9" (229mm) 1" (25mm) 1 5 /8" (41mm) 3 3 /4" (95mm) 1 5 /8" (41mm) 12"(305mm) Minimum Clearance 11 /16" (17mm) 5 /32" (4mm) Von Duprin 6200 Series

95 Ordering information 6210-FSE-DS-24-S024-US3- EB- CON Model Power failure mode Dual switch * Voltage Rectifier kit * Finish Buzzer * Allegion Connect * * Optional Selections correspond with the numbers above 1 Model Reference specification chart to make the proper model selection 2 Power failure mode FSE Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked. Fire-rated. FS Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non-fire-rated. 3 Dual switch (optional) DS Monitors latch bolt and lock status. DS switches rated for 24 VDC at amps. DS-LC Low current option for computer monitoring. Monitors latch bolt & lock status. DS-LS switches rated for 24 VDC at.050 amp or less. 4 Voltage (VDC) 24 Low voltage DC power (standard) 12 Low voltage DC power 16 Low voltage DC power 18 Low voltage DC power 5 Rectifier kit (optional) S012 Converts 12 VAC voltage to 12 VDC to operate the solenoid S024 Converts 24 VAC voltage to 24 VDC to operate the solenoid 6 Finish US3 Plated polished brass on stainless steel US4 US10 Plated dull brass on stainless steel Plated dull bronze on stainless steel US10B Plated dark bronze, oil rubbed on stainless steel BHMA 629/US32 Stainless steel, polished BHMA 630/US32D Stainless steel, satin 7 Buzzer (optional) EB Entry Buzzer Only available if Fail-Secure (FSE) is specified. 8 Allegion Connect CON Allegion Connect Connector 6 in. wire extension harness available If AC power is required, specify rectifier kit. Allegion, the Allegion logo, Schlage, Von Duprin, the Von Duprin logo, and Falcon are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners. About Allegion Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA, Interflex, LCN, Schlage and Von Duprin. Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit Allegion , Rev. 04/16

96 Head and Jamb Protection Note: A = Aluminum AA = Clear Anodized B = Bronze D = Dark Bronze Anodized G = Gold Anodized PVC = Polyvinyl, clear ZAG = Ligature-Resistant gasketing Frame #6x.500"(12.7) SMS HINGE SIDE Door Solid Neoprene.590" (15.0 ).220" (5.6) #6x.500"(12.7) SMS #6x.500"(12.7) SMS.094" (2.4) Solid Neoprene 1.00"(25.4) #6x.500"(12.7)SMS.219" (5.6) Solid Neoprene.250" (6.4).590" (15.0).220" (5.6).094" (2.4) #6x.500"(12.7) SMS Solid Neoprene.219" (5.6) 1.00"(25.4) #6x.500"(12.7)SMS Nylon Brush.590" (15.0).220" (5.6) Nylon Brush.279" (7.1) #6x.500"(12.7) SMS.500" (12.7) #6x.500"(12.7)SMS Solid Neoprene.625" (15.9).220" (5.6) Snap-On Cover Solid Neoprene.279" (7.1) #6x.500"(12.7) SMS.500" (12.7) Solid Neoprene.220" (5.6).250 (6.4).625" (15.9) Snap-On Cover #6x.500"(12.7) SMS Nylon Brush.625" (15.9).220" (5.6) Snap-On Cover PRODUCT CATALOG #90 PAGE 30 INTERNATIONAL.COM

97 2.50"(63.5) #6x.500"(12.7) SMS.088"(2.2) Legend: A = Aluminum ANSI/BHMA #142A R3Y Concord Avenue Bronx, NY Notes: tel: fax: zero@zerointernational.com web site: Part No: 142 Part Description: Rain Drip - Aluminum Provided By: Customer Name: Job No: Date:

98 Rabbeted Thresholds Note: A = Aluminum B = Bronze D = Dark Bronze Anodized Thresholds can be ordered with E (Epoxy Abrasive), EL (Epoxy Abrasive Photoluminescent) or V3 (Full Body Strength) options..500" (12.7) 1.750" (44.5) Neoprene.125" (3.2).125" (3.2) 3.687" (93.6).500" (12.7).250" (6.4) 1.750" (44.5) Neoprene.125" (3.2) (Not shown) 5.00" (127.0) 1.750" (44.5).125" (3.2).500" (12.7).125" (3.2) Neoprene 6.00" (152.4).625" (15.9).250" (6.4) 1.750" (44.5) Neoprene Tile.125" (3.2) 2.00" (50.8).125" (3.2).375" (9.5) 2.155" (54.7) 3.00" (76.2) 1.750" (44.5).625" (15.9).250" (6.4).500" (12.7).250" (6.4) Neoprene.125" (3.2) 5.00" (127.0) 3.125" (79.4) Neoprene.125" (3.2) 5.00" (127.0) 3.063" (77.8) For latch track hardware For latch track hardware Neoprene.875" (22.2).500" (12.7).125" (3.2) 5.00" (127.0) For latch track hardware 2.750" (69.9) Neoprene 1.00" (25.4).500" (12.7).140" (3.6) 4.500" (114.3) PRODUCT CATALOG #90 PAGE 8

99 Meeting Stiles - Both Doors Active Note: A = Aluminum AA = Clear Anodized B = Bronze D = Dr. Bronze Anodized G = Gold Anodized #6x.500"(12.7)SMS #6x.500"(12.7) SMS.395" (10.0).219" (5.6) 1.00"(25.4) Extruded Neoprene 1.00"(25.4) Solid Neoprene Brush Astragal #6x.500"(12.7)SMS #6x.500"(12.7) SMS.395" (10.0).219" (5.6).094" (2.4) 1.00"(25.4) Pile with Fin Seal 1.00"(25.4) Solid Neoprene #8x1.00"(25.4) SMS #6x.500"(12.7)SMS Adjusting Screw.395" (10.0).500" (12.7) 1.00"(25.4) Self-Extinguishing Silicone.875"(22.2) Self-Extinguishing Silicone Unit has adjusting screws approx. 10" on center #8x1.00"(25.4) SMS #8x1.00"(25.4) SMS Adjusting Screw.500" (12.7).500" (12.7).875"(22.2) Solid Neoprene Internal Spring self-adjusting.875"(22.2) Pile with Fin Seal Unit has adjusting screws approx. 10" on center #6x.500"(12.7)SMS.320" (8.1) min #6x.500"(12.7)SMS.072" (1.8).629" (16.0).656" (16.7) Extruded Aluminum Housing is flush with lead edge of door.984"(25.0) Vinyl Magnet Snap-on Cover ( tamper-proof ).406" (10.3) Vinyl Magnetic Insert PRODUCT CATALOG #90 P AGE 36 NAL.COM

100 Self-Adhesive Weatherstripping Note: N = Neoprene S-Bk = Silicone, Black S-Br = Silicone, Brown S-Cl = Silicone, Clear FS= Intumet Rubber Y-Bk = Polyvinyl, Black S-Wh = Silicone, White S-Gy = Silicone, Grey BIO = Antibacterial PSA* is equipped with 3M self-adhesive tape Gasketing, White All products are available with ZAG feature (Anti-Ligature) PSA PSA PSA.500" (12.7).250" (6.4) PSA.375" (9.5).187" (4.8) PSA.500" (12.7).187" (4.8).250" (6.4).425" (10.8).234" (5.9).500" (12.7) PSA.400" (10.2) PSA.500" (12.7).200" (5.1) PSA.500" (12.7).375" (9.5) PSA.437" (11.1).437" (11.1) PSA 1.00"(25.4).500" (12.7).250" (6.4) PSA.125" (3.2).500" (12.7) PSA.125" (3.2).500" (12.7) PSA.185" (4.7) 1.00"(25.4) PSA.094" (2.4) 1.250" (31.8).125" (3.2).375" (9.5) PSA.250" (6.4).125" (3.2).375" (9.5) PSA PSA.185" (4.7).750"(19.1).375" (9.5) 1.00"(25.4).400" (10.2).500" (12.7).125"(3.2).625" (15.9).625" (15.9).750" (19.1).625" (15.9) 1.00" (25.4).500" (12.7) 1.250" (31.8).625" (15.9) PRODUCT CATALOG #90 PAGE 33 INTERNATIONAL.COM