Vane pump, direct operated
|
|
- Wesley Nicholson
- 5 years ago
- Views:
Transcription
1 Vane pump, direct operated RE 1/8.8 Replaces: 1. 1/18 Type PV7 A Nominal sizes 1 to Series 1X / X Maximum operating pressure 1 bar Displacement volume 1 to cm 3 H17 H9 Overview of contents Features Contents Page Features 1 Ordering details, Preferred types Symbol Function, section 3 Technical Data Dynamic characteristics Characteristic curves to 9 Unit dimensions 1 Multiple pumps 11 to 1 Engineering guidelines for multiple pumps 1 Installation guidelines 1 Engineering guidelines, Commissioning guidelines 17 Very short control times Low operating noise Mounting and connection dimensions to VDMA /1 and ISO 319/ Good efficiency Long service life Adjustable displacement volumes Information on available spare parts:
2 /18 Bosch Rexroth AG Hydraulics PV7...A RE 1/8.8 Ordering details Series BS = 1X (series 1 to 19) BS = X (series to 9) 1 to 19; to 9: installation and connection dimensions unchanged Build size BS Nominal size NS 1 cm 3 = 1 1 cm 3 = 1 cm 3 = cm 3 = Direction of rotation Clockwise (viewed on the drive shaft) = R Drive shaft Cylindrical drive shaft = A Cylindrical drive shaft with throught drive = E Pipe connections Suction and pressure connections = 1 Pipe thread to ISO 8/1 Ordering examples: PV7 R 1 A * PV7-1X/-1RA1MA-1 PV7-X/-RA1MA- M = K = A = Further details in clear text Zero stroke pressure range ) V7/-1 = to bar 1 = to 1 bar V7/-1 = 1 to bar 7 = to 7 bar V7/ = to bar 1 = to 1 bar Adjustment device = Adjustment screw (standard) 3 = 1) Lockable rotary knob and scale (for BG ) 3 = Controller with lock (for BG ) direct operated Seals NBR - seals, suitable for mineral oil HLP to DIN 1 FKM shaft seal (other seals from NBR) suitable for use with HETG- and HEES-pressure fluids to VDMA SW Pump with customer specific settings: PV7-X/-RA1MA-1 details in clear text: q V max = l/min; p zero stroke = 7 bar The pump will be set to the required values. The optimum operating noise will be set at the required zero stroke pressure. Without any clear text setting information the flow and the zero stroke pressure will be set to the relevant maximum values. 1) H-key with Material No. R9818 is included within the scope of supply. ) As delivered the zero stroke pressure is set to the smallest value! Further preferred types and standards can be found in the EPS (Standard Price List). Preferred types (readily available) Type Material No. Type Material No. PV7-1X/-1RA1MA- R9187 PV7-X/-RA1MA- R999 PV7-1X/-1RA1MA-1 R9333 PV7-X/-RA1MA-1 R9993 PV7-1X/-1RA1MA- R99193 PV7-X/-RA1MA- R999 PV7-1X/-1RA1MA-7 R PV7-X/-RA1MA-1 R999 Symbol P S L
3 RE 1/8.8 PV7...A Hydraulics Bosch Rexroth AG 3/18 Function, section Type PV7...A hydraulic pumps are direct operated vane pumps with an adjustable displacement volume. The basically comprise of the housing (1), cover (), rotor (3), vanes (), stator ring (), compression spring (), adjustment screw (7) and control plate (8). For limiting the maximum flow, the pump is fitted with an adjustment screw (9). The driven rotor (3) rotates within the stator ring (). The vanes () which are guided in the rotor (3) are pressed against the inner running surface of the stator ring () by centrifugal force. Suction and displacement process The chambers (1) which are required for the transport of the fluid are formed by the vanes (), the rotor (3), the stator ring (), the control plate (8) and the cover plate (). The chamber volume increases as the rotor (3) rotates and the chambers fill themselves with fluid via the suction channel (S). When the largest chamber volume is reached, the chambers (1) are separated from the suction side. As the rotor (3) continues to rotate the connection to the pressure fluid side is opened, the chambers decrease in size and force the fluid into the system via the pressure port (P). Pressure control The stator ring () is held in its initial excentric position by spring (). The maximum operating pressure required in the system is set at the adjustment screw (7) via the spring (). The pressure which builds up due to the work resistance acts on the pressure side of the inner running surface of the stator ring (), against the force of the spring (). When the relevant pressure is reached, which is determined by the set spring force, the stator ring () is moved out of its excentric position in the direction of the zero position. The flow adjusts itself to the value which is being demanded at that time. When the highest set pressure, which has been set at the spring (), has been reached then the pump regulates the flow back to virtually zero. The operating pressure is maintained and only the leakage fluid is replaced. Losses and heating of the fluid is thereby minimised P S Type PV7-1X/ A... 8 S P L 9 1 Type PV7-X/ A... S
4 /18 Bosch Rexroth AG Hydraulics PV7...A RE 1/8.8 Technical Data (for applications outside these parameters, please consult us!) allgemein Mounting style Flange mounting Pipe connections Pipe thread G... to ISO 8/1 Installation Optional Shaft loading Radial and axial forces cannot to taken up Direction of rotation Clockwise (viewed on the drive shaft) Drive speed n min 1 9 to 18 Weight m kg hydraulic Build size BS Nominal size / displacement volume V cm Max. permissible drive torque T Nm 11 Operating pressure, absolute Inlet p min-max bar.8 bis. Outlet p max bar Leakage outlet q max bar Leakage flow at zero stroke q V l/min (at operating pressure output = p zero stroke max) Max. flow 1) q V (at n = 1 min 1 ; p = 1 bar; ν = 1 mm /s) l/min Pressure fluid HLP mineral oil to DIN 1 parat Please take the specifications stated within catalogue sheet RE 77 into account! Class 19/1/13 ) Pressure fluid temperature range ϑ C 1 to +7, take the permissible viscosity range into account! Viscosity range ν mm /s 1 to 1 at operating temperature Max. 8 when starting under displacement conditions Max. when starting under zero stroke conditions Maximum permissible degree of contamination of the pressure fluid is to ISO (c) ) 1) Flow deviations due to manufacturing tolerances of a max. of + % is possible ) The cleanliness class stated for the components must be adhered too in hydraulic systems. Effective filtration prevents faults from occurring and at the same time increases the component service life. For the selection of filters see catalogue sheets RE 7, RE 7 and RE 81.
5 RE 1/8.8 PV7...A Hydraulics Bosch Rexroth AG /18 Dynamic characteristics, measurement build-up (measured at n = 1 min 1, ν = 1 mm /s and ϑ = C) The control times are valid for the measurement build-up as shown. For other set-ups and line lengths the control times will change. 1 Control times (average value) t down / t up Directional valve (switching time 3 ms) Throttle for setting the pressure during displacement 3 Hydro pump Pressure measurement point 3 Operating pressure p Control down bar t 1 ab t ab p N Zeit t Operating pressure p p N t 1 auf t auf Control up 1 bar Zeit t q V displacement q V zero stroke q V zero stroke q V displacement Pump type Pressure p N bar t 1 down t down p max 1) t 1 up t up ) Permissible pressure peaks
6 /18 Bosch Rexroth AG Hydraulics PV7...A RE 1/8.8 Characteristic curves: type PV7/ 1, (measured at n = 1 min- 1, ν = 1 mm /s and ϑ = C) 1 1 3, Flow in l/min A... P displacement, 1, Drive power in kw P zero stroke Flow in l/min A 1... P displacement 3,, 1, Drive power in kw P zero stroke Noise pressure level Noise pressure level in db(a) during displacement at zero stroke Measured in anechoic chamber to DIN 3, page Distance: Noise sensor pump = 1m
7 RE 1/8.8 PV7...A Hydraulics Bosch Rexroth AG 7/18 Characteristic curves: type PV7/ 1, (measured at n = 1 min- 1, ν = 1 mm /s and ϑ = C) Flow in l/min A... P displacement 3,, 1, Drive power in kw P zero stroke 1 3 Flow in l/min A 7... P displacement 3,, 1, Drive power in kw P zero stroke Noise pressure level Noise pressure level in db(a) during displacement at zero stroke Measured in anechoic chamber to DIN 3, page Distance: Noise sensor pump = 1m
8 8/18 Bosch Rexroth AG Hydraulics PV7...A RE 1/8.8 Characteristic curves: type PV7/, (measured at n = 1 min- 1, ν = 1 mm /s and ϑ = C) 3 Flow in l/min 1 1 A- P displacement P zero stroke Drive power in kw 3 Flow in l/min 1 1 A-1 P displacement P zero stroke 3 1 Drive power in kw Noise pressure level Noise pressure level in db(a) 8 during displacement at zero stroke Measured in anechoic chamber to DIN 3, page Distance: Noise sensor pump = 1m
9 RE 1/8.8 PV7...A Hydraulics Bosch Rexroth AG 9/18 Characteristic curves: type PV7/, (measured at n = 1 min- 1, ν = 1 mm /s and ϑ = C) 3 3 A- 7 Flow in l/min 1 1 P displacement P zero stroke Drive power in kw 3 7 Flow in l/min 3 1 A-1 P displacement 3 Drive power in kw 1 P zero stroke Noise pressure level Noise pressure level in db(a) Measured in anechoic chamber to DIN 3, page Distance: Noise sensor pump = 1m during displacement at zero stroke 7 1
10 1/18 Bosch Rexroth AG Hydraulics PV7...A RE 1/8.8 Unit dimensions (dimensions in mm) PV7/ 1 8, max 11, h max. 1 3 G 3/8, h9 Ø1 H13 ; 7 Ø8 h8, Ø j 3 P L S 1,, G 1/ G 1/ Ø11, ±, 1 17,7 197,7, ±,, ±, 9 7 PV7/ G 1/ G 1/ 3 Ø11 H Ø1 h8 8 Ø j P L 1 1 ±, 8 h9 S 13 max. 79 max G 3/ 1 1 Flow adjustment Adjustment guidelines: With clockwise rotation, the flow decreases With anti-clockwise rotation, the flow increases Note: The change in flow for one turn of the adjustment screw is for: PV7/ approx. 7. l/min PV7/ approx. 1 l/min each at n = 1 min -1 Pressure adjustment: Adjustment guidelines: With clockwise rotation, the operating pressure increases With anti-clockwise rotation, the operating pressure decreases 3 Pressure connection Suction connection Drain port Drive shaft max. 7 Pressure adjustment via adjustment screw (standard), ordering detail... 8 Pressure adjustment with lockable rotary knob with scale, ordering detail Space required to remove key 1 Lock
11 RE 1/8.8 PV7...A Hydraulics Bosch Rexroth AG 11/18 Multiple pumps Material No. combination parts Rear pump Front pump V7-1X/ RE V7-X/ RE PV7-1X/...RA... R9889 R981 PV7-X/...RA... R9813 PGF1-X/...RE1VU R9878 PGF-X/ RJ R93373 R911 PGP-X/ RJ R93373 R911 PGH-X/ RR R93373 R911 PGH3-X/ RR R93373 R911 AZPF RR R93373 R911 A1VSO1..U R93373 R911 A1VSO18..U R93373 R911 PGF3-3X/...RJ... R98887 PVV/Q1/-1X/...RJ... R98887 PR-1X/,,- WG R91 PR-3X/1,,- RA R917 Ordering details for multiple pumps PV7 AO + V7 AO R E E Double = P First pump series First pump nominale size First pump controller Second pump series Second pump nominale size Second pump controller First pump mounting flange Second pump connection port Second pump shaft version (if required) 1) First pump connection port First pump shaft version Direction of rotation 1) for PGF and PGF3 Triple and quadruple pumps are coded analogue! Ordering examples: PV7/-A+V7/-1ARE1+1E PV7/-1A+GF/1RE1+JE
12 1/18 Bosch Rexroth AG Hydraulics PV7...A RE 1/8.8 Pump combinations PV7 + V7 (dimensions in mm) B1 JS9 L1 L L L L3 P Ø D 13 Splined hub /8 1 / 3 DP; 9 T M1; ,1 +,3 1, +, 13 Ø 8, H1 Ø D3 Ø D1 x D H13 L S 1st pump BS nd pump BS L1 L L3 ØD1 ØD ØD3 D H1 B1 L L L M M M Pump combinations PV7/- + GF/GP/GH/GH3 (dimensions in mm) Mounting geometry to SAE J 7 Flange 8- (SAE A) Hub 1- (SAE A)
13 RE 1/8.8 PV7...A Hydraulics Bosch Rexroth AG 13/18 Pump combinations PV7/- + GF1 (dimensions in mm) 177 L M1; 13 7 L3 7 3,1 +,3 1, +, 1 / 3 DP; 9 T M1; Ø 8, P 13,8 +,1 3,1 +,3 1, +, 13 Ø 1 F7 Ø 8, +, +,1 S PGF1 nominal size L3 L Pump combinations PV7/- + GF/GP/GH/GH3 (dimensions in mm) Mounting geometry to SAE J 7 Flange 8- (SAE A) Hub 1- (SAE A) Splined hub /8
14 1/18 Bosch Rexroth AG Hydraulics PV7...A RE 1/8.8 Pump combinations PV7/- + GF3/GP3/VV1/VV/GH (dimensions in mm) Mounting geometry to SAE S 7 Flange 11- (SAE B) Hub - (SAE B) x 1 Splined hub DIN 81 Ø +, +, M , 1 Ø 11, Splined hub 7/8 1 / 3 DP; 13 T Pump combinations PV7/- + R-Mini (dimensions in mm) Ø 3 +, +,1 x, H13
15 RE 1/8.8 PV7...A Hydraulics Bosch Rexroth AG 1/18 Pump combination PV7/- + R-Standard (dimensions in mm) L1 L P 8 JS9 8,3 +, Ø F7 Ø 3 +, +,1 Ø 8 +, +,1 x 9 H13 L S L1 L L3 3/ pistons 1 pistons 3/ pistons 1 pistons 3/ pistons 1 pistons , 318 Engineering guidelines for multiple pumps The general technical data is the same as with the single pumps (see page ). The pump with the higher load (pressure x flow) should be the first pump stage. When combining several pumps, the torques produced can reach excessively high values. The sum of the torques must not exceed the permissible values (see table) Single pump T 1 Combination pump T 1 T T max T max 1st pump T ab1 nd pump T ab T ab max PV7 Build size Drive torque T max Max. permissible Output torque T from max T = Δp V.19 (Nm) η hydr.-mech T 1. = (Nm).8 T 1. =.8 Nm T ab max Calculation example: V = Displacement volume in cm 3 η hydr.-mech. = Hydraulic mechanical efficiency T = Torque in Nm Δp = Pressure in bar T = T 1 + T = 93. Nm T max The combination pumps PV7/-.. + V7/-.. can be operated on the basis of the calculated data.
16 1/18 Bosch Rexroth AG Hydraulics PV7...A RE 1/8.8 Installation guidelines Fluid reservoir Match the service capacity of the reservoir to the operating conditions. The permissible fluid temperature must not be exceeded, if required, provide a cooler! Antrieb: E-Motor + Pumpenträger + Kupplung + Pumpe Lines and connections Remove protective plugs from the pump. We recommend the use of seamless precision steel pipes to DIN 391 and removable pipe connections. Select the inside diameter of the pipes according to the ports. Throughly clean pipes and fittings before assembly. keine Radial- und Axialkräfte auf die Pumpen-Antriebswelle zulässig! Motor und Pumpe müssen exakt fluchten! drehelastische Kupplung verwenden Piping recommendations (dimensions in mm) Leakage Installation position Horizontal position preferred B3 min 1 min Suction line B min 1 min V1 The leakage line is to be so fitted that the pump cannot drain! Under no circumstances must leakage and return fluid be directly taken up by the pump! Filter Whenever possible, use return line or pressure filters. (Suction filter only in conjunction with low pressure switch/ clogging indicator) Pressure fluid Please take the specifications stated within catalogue sheet RE 77 into account. We recommend brand name fluids. Do not mix hydraulic fluids of different types since this can result in decomposition and deterioration of the lubricating quality. The fluid must be replaced at regular intervals according to the operating conditions. In connection with this, the tank must also be cleaned of residues.
17 RE 1/8.8 PV7...A Hydraulics Bosch Rexroth AG 17/18 Engineering guidelines Comprehensive instructions and proposals can be found in the Hydraulic Trainer, volume 3 RE 81, Planning and design of hydraulic power systems. When using vane pumps we recommend that the following guidelines are partically taken into account. Technical data All the technical data are dependent on manufacturing tolerances and are valid with certain operating conditions. Please therefore take into account that minor variations are possible and technical data can be affected by differing conditions (e.g. viscosity). Characteristic curves Characteristic curves for flow and absorbed power. Please take into account when dimensioning the drive motor the maximum possible application data. Noise The noise pressure level values given on pages to 7 are measured according to DIN 3 part. This means that only the noise emission of the pump is given. Ambient influences (such as place of installation, piping, etc.) are not taken into consideration. The values only refer to one pump. Attention! The power unit design and the influences at the unit s final place of installation, in general, result in the fact that the noise pressure levels lie to 1 db(a) higher than that of the pump alone. Leakage fluid On page the average external leakage of the pump is stated. Please note that these values are only intended for use as engineering guidelines when defining cooler sizes and pipe sizes. When determining the size of the oil reservoir the appropriate value to be used is the zero stroke power (see pages to 7). Changes in cross-section and the use of a leakage oil cooler can result in there being unpermissibly high pressure peaks in the leak-oil line. Commissioning guidelines Bleeding All of the PV7...A type vane pumps are self-priming. Before commissioning for the first time, the pump has to be bled so that it is protected against damage. During the first commissioning, we recommend that the housing is filled via the leakage connection. Take into account the filter rating! This increases operating safety and prevents wear in the case of unfavourable installation conditions. If the pump after approx. seconds does not displace oil without any bubbles then the system has to be rechecked. After the operating values have been reached, check the pipe connections for leakage and check the operating temperature. Commissioning Check to see if the system has been carefully, correctly and cleanly assembled. Take into account the motor and pump direction of rotation arrows. Start the pump without load and let is displace oil without pressure for a few seconds in order to provide sufficient lubrication. On no account let the pump run without oil! Attention! Adjustment, maintenance and servicing of the pump must only be carried out by authorised, trained and instructed personnel! Use only original Rexroth spare parts! The pump must only be operated within the permitted limits. The pump may only be operated in a sound condition! When carrying out any work on the pump (e.g. removing and refitting) switch the system to zero pressure and isolate from the mains supply! Unauthorised conversions and modifications which affect the safety and function of the pump are not permitted! Provide protective measures (e.g. coupling guard)! Do not remove any existing protective devices! The general valid safety and accident prevention regulations must be adhered too!
Vane pump, direct operated Type PV7 A
RE 1 /1. Replaces: 1 1 1 Vane pump, direct operated Type PV7 A Nominal sizes 1 to eries 1X / X Maximum operating pressure 1 bar Displacement volume 1 to cm 3 H/A 17/9 Type PV7-1X/..RA1MA-... Overview of
More informationVariable Vane Pump, Direct Controlled PV7...A Series 1X / 2X
Variable Vane Pump, Direct Controlled PV7...A Series 1X / X RE 1 Issue: 1.13 Replaces: 8.8 Sizes 1 to Maximum pressure 1 bar Displacement volume 1 to cm 3 Features Very short control times Low noise Mounting
More informationVane pumps, direct controlled Type PV7...A
Vane pumps, direct controlled Type PV7...A Nominal sizes 1 to 25 eries 1X Maximum operating pressure 1 bar Displacements from 1 to 25 cm 3 H/A 617/95 Type PV7-1X/..RA1MA-... H/A/D 56/97 Typ MPU1-V71-9L/...
More informationRexroth Hydraulics. Fixed displacement vane pumps Types PVV and PVQ RE /11.97
RE 1 335/1.97 RE 1 335/11.97 Fixed displacement vane pumps Types and Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 H/A/D 5769/97 Single pump type
More informationFixed displacement vane pumps Types PVV and PVQ
RE 1 335/11.2 Replaces: 11.97 Fixed displacement vane pumps Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 H/A/D 5769/97 Single
More informationFixed displacement radial piston pump
Fixed displacement radial piston pump RE 11263/05.13 Replaces: 10.05 1/16 Type R4 izes 1.60 to 20.00 cm 3 Component series 3X Maximum operating pressure 700 bar H7322 2R4-3X/4,00-700RK01M01+AZF8 H7321
More informationRadial piston pump, fixed displacement
Radial piston pump, fixed displacement RE 11260/08.05 Replaces: 07.02 1/8 Type R4 izes 0.40 to 2.00 cm 3 Component series 1X Maximum operating pressure 700 bar R4_d R4-1X/1,00-450WA01M01 Table of contents
More informationRA / Internal Gear Pump Model GP2, Series 2X Fixed Displacement. Typical application:
Sizes 6.3 to 16 Internal Gear Pump Model GP2, Series 2X Fixed Displacement up to 576 PSI.397 to.98 in 3 (35 bar) (6.5 to 16 cm 3 ) RA 1 23/6.97 RA 1 23/6.97 Characteristics: Peak pressure of up to 576
More informationRA / Internal Gear Pump Model GP3, Series 3X Fixed Displacement. Typical application:
Sizes 20 to 32 Internal Gear Pump Model GP3, Series 3X Fixed Displacement up to 5076 PSI 1.25 to 1.98 in 3 (350 bar) (20.6 to 32.5 cm 3 ) RA 10 234/07.97 Characteristics: Peak pressure of up to 5.076 PSI
More informationRadial piston pump PR4 Series 1X
Radial piston pump R4 eries 1X RE 1160 Edition: 07.015 Replaces: 08.005 Fixed displacement izes 0,40 to,00 Maximum working pressure 700 bar Maximum displacement cm 3 R4-1X/1,00-450WA01M01 Features elf-priming,
More informationRadial piston pump PR4 series 1X
Radial piston pump R4 series 1X RA 1160 Edition: 07.015 Replaces: 08.005 Fixed displacement izes 0,40 to,00 Maximum working pressure 700 bar (10150 psi) Maximum displacement cm 3 (0.1 in 3 ) R4-1X/1,00-450WA01M01
More informationInternal gear pump Type PGH Fixed displacement
RE 10 223/07.99 Replaces: 01.98 Internal gear pump Type GH Fixed displacement Frame sizes 2, 3, 4 and 5 eries 2X Maximum operating pressure 350 bar Maximum displacement 6 to 250 cm 3 DR 67180-3/94 Internal
More informationClamping and drive module
Clamping and drive module RE 51147/10.05 Replaces: 04.02 1/14 Type UPE 3 Drive power 3.0 kw / 4.0 kw Series 1X Maximum operating pressure 700 bar H6842 Overview of contents Contents Page Features 1 Application
More informationVariable vane pumps, pilot operated
Variable vane pumps, pilot operated RE 10515/10.05 Replaces: 07.02 1/30 Type V7 izes 14 to 150 eries1x Maximum operating pressure 1 bar Maximum flow 270 l/min H5641 Type 2V7/...+ GF1/... H1790 Type 2V7/16...
More informationDouble throttle check valve Type Z2FS 10
RE 7 58/0.03 Replaces:.0 Double throttle check valve Type ZFS 0 Nominal size 0 Series 3X Maximum operating pressure 35 bar Maximum flow 0 L/min Overview of contents Contents Page Features Ordering details
More informationInternal gear pump, fixed displacement
Internal gear pump, fixed displacement RE 023/04.05 Replaces: 06.02 /24 Type GF Frame sizes, 2 and 3 Component series: 2X (F and 2) 3X (F3) Maximum operating pressure 250 bar Maximum displacement.7 to
More informationAxial piston variable pump A4VG Series 32. Europe. RE-E Edition: Replaces:
Axial piston variable pump A4VG Series 32 Europe RE-E 92003 Edition: 04.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit Size 28 to 125 Nominal pressure 400 bar Maximum pressure
More informationPressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 68/0. Replaces: 06.03 /8 Type ZDR Size 0 Component series X Maximum operating pressure 0 bar Maximum flow 80 l/min H77 Table of contents Contents Page Features
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationAxial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
More informationPressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 657/5. Replaces:.3 /8 Type ZDR Size 6 Component series 4X Maximum operating pressure bar Maximum flow 5 l/min H775 Table of contents Contents Page Features Ordering
More informationPressure reducing valve, pilot operated
Pressure reducing valve, pilot operated RE 685/.5 Replaces:. /6 Type DR K Size Component series X Maximum operating pressure 5 bar Maximum flow l/min K478/7 Table of contents Contents Page Features Ordering
More informationPressure relief valve, pilot operated
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 46-5480 www.cmafh.com Pressure relief valve, pilot operated Types ZDB and ZDB Nominal size 6 Component series
More informationExternal gear motor High Performance AZMB
External gear motor High Performance AZMB RE 14027 Edition: 0.201 Platform B Fixed displacement Sizes 2.5 to 7.1 Continuous pressure up to 220 bar Intermittent pressure up to 2 bar Features Consistently
More informationInternal Gear Pump, Fixed Displacement PGF
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies neumatics ervice Internal Gear ump, Fixed Displacement GF RE 023/05.2 /20 Replaces: 04.05 Data Type GF sheet Frame sizes,
More information5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
More informationAxial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
More informationDrive module. Table of contents. Features. Applications. RE 51145/06.12 Replaces: Type UPE 5
Drive module RE 51145/06.12 Replaces: 05.12 1/16 Type UPE 5 Component series 1X Maximum operating pressure 250 bar Drive power 2.2 to 4.0 kw H7328 Table of contents Contents Page Features, applications
More informationGerotor pump, fixed displacement volume
Gerotor pump, fixed displacement volume RE 10545/12.11 1/12 Type GZ Component series 1X Maximum operating pressure 15 bar Maximum displacement 140 cm³ H7572_d Table of contents Contents age eatures 1 Ordering
More informationAxial Piston Variable Double Pump A8VO
Axial Piston Variable Double Pump A8VO RE 93010/03.09 1/40 Replaces: 11.07 Data sheet Series 61 / 63 Sizes 55...200 Nominal pressure 350 bar Peak pressure 400 bar for open circuit Contents Ordering Code
More informationThrottle check valve. Type Z2FS. Contents. Features. RE Edition: Replaces: 10.07
Throttle check valve Type ZFS RE 758 Edition: 06-0 Replaces: 0.07 Size 0 Component series 3X Maximum operating pressure 35 bar [4569 psi] Maximum flow 60 l/min [4.3 US gpm] H5556 Features Sandwich plate
More information5.1 MEDIUM HEAVY DUTY SERIES SIZE 2
.1 MEDIUM HEAVY DUTY SERIES SIZE 2 CONTENTS PGI100 Ordering Code.1.1 Medium Heavy Duty Series Technical Information.1.2 Specifications.1.3 Hydraulic fluids.1.4 Viscosity range.1. Temperature range.1.6
More informationHydraulic drive power unit Low noise compact unit Wispering power unit
Hydraulic drive power unit Low noise compact unit Wispering power unit RE 51096/04.09 Replaces: 02.06 1/10 Type ABFAG Component series 2X Reservoir volume 100-1000 litres horizontal design ABFAG_li Type
More informationPressure reducing valve, direct operated. Type ZDR. Contents. Features. RE Edition: Replaces:
Pressure reducing valve, direct operated Type ZDR RE 657 Edition: 8-3 Replaces: 8- Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 5 l/min H775 Features Sandwich plate valve Porting
More informationPressure relief valve, direct operated. Type ZDBY D, Z2DBY D. Features. Contents. RE Edition: Replaces: 01.09
Pressure relief valve, direct operated ype ZDBY D, ZDBY D RE 5 Edition: -8 Replaces:.9 Size 6 Component series X Maximum operating pressure 35 bar Maximum flow 6 l/min tb3 Features Contents Sandwich plate
More informationHydraulic drive power unit Low-noise compact unit Whispering power unit
Hydraulic drive power unit Low-noise compact unit Whispering power unit RE 51094/05.04 Replaces: 08.03 1/12 Type AFAG-V Component series 1X Reservoir volume 160-1000 litres Vertical design rb0002 Type
More informationMotor-pump group. Features. Table of contents RE 51171/ Type ABAPG and ABHPG
Motor-pump group RE 51171/07.12 1/16 Type ABAPG and ABHPG with pump type: PV7 Electric motor frame size 90S to 250M max. pressure up to 160 bar max. flow up to 162.5 l/min H7896+7897_d Table of contents
More informationCheck valve cartridge Type M-SR
RE /. Replaces:.9 Check valve cartridge Type M-SR Nominal sizes to Series X Maximum operating pressure bar Maximum flow L/min Overview of contents Contents Page Features Ordering details, symbols Preferred
More informationExternal gear pumps Type G2, Series 4X
E 1 /.99 External gear pumps Type G2, Series X E 1 /.99 NS to 22 up to 2 bar up to 22. cm eplaces:.98 New principle of housing sealing, thereby giving a very long housing service life ong seal service
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationAxial Piston Variable Pump AA4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump AA4VG RA 92003-A/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Size 28...
More informationAxial piston variable pump A10VSO Series 31 for explosive areas ATEX II 3G ck IIB T4
Axial piston variable pump A10VSO Series 31 for explosive areas ATE II 3G ck II T4 Part II of instruction manual according to ATE directive 94/9/EC data sheet RE 92711-01--2 Issue: 04.2015 Replaces:. Sizes
More informationAxial Piston Variable Pump A4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump A4VG RE 92003/03.09 1/64 Replaces: 09.07 Data sheet Series 32 Sizes 28...250
More informationCheck valve. RE 21536/07.05 Replaces: Type Z1S. Size10 Component series 3X Maximum operating pressure 315 bar Maximum flow 100 l/min 1/6
Check valve RE 2536/07.05 Replaces: 05.02 /6 ype ZS Size0 Component series 3X Maximum operating pressure 35 bar Maximum flow 00 l/min H5856 able of contents Contents Page Features Ordering code 2 Standard
More informationAxial piston units A10FZO, A10VZO and A10FZG, A10VZG Series 10 for variable-speed drives
Axial piston units A10FZO, A10VZO and A10FZG, A10VZG Series 10 for variable-speed drives RE 91485 Edition: 10.2016 Replaces: 06.2011 For variable-speed operation with synchronous and asynchronous motors
More informationThrottle check valve. RE 27518/10.07 Replaces: Type Z2FS
Throttle check valve RE 758/0.07 Replaces: 0.03 /8 Type ZFS Size 0 Component series 3X Maximum operating pressure 35 bar [4569 psi] Maximum flow 60 l/min [4.3 US gpm] H5556 Table of contents Content Page
More informationAxial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
More informationAxial piston fixed motor A2FM Series 70 A2FE Series 70
Axial piston fixed motor A2FM Series 70 A2FE Series 70 RE 91071 RE Edition: 910712.2015 Edition: Replaces 12.2015 03.2015 A2FMN, A2FEN (sizes 56 to 107): Nominal pressure 300 bar Maximum pressure 350 bar
More informationAxial piston fixed motor A2FM series 70. Americas. RE-A Edition:
Axial piston fixed motor A2FM series 70 Americas RE-A 91071 Edition: 05.2015 A2FMN (Sizes 90 and 107): Nominal pressure 300 bar Maximum pressure 350 bar A2FMM (Sizes 80 and 90): Nominal pressure 400 bar
More information2-way flow control valve. Type 2FRM, 2FRH, 2FRW. Contents. Features. RE Edition: Replaces: 07.04
2-way flow control valve Type 2FRM, 2FRH, 2FRW RE 28389 Edition: 2013-05 Replaces: 07.04 Sizes 10 and 16 Component series 3X Maximum operating pressure 315 bar Maximum flow 160 l/min H5552 Features For
More informationVariable Displacement Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series
More informationThrottle and throttle check valve
Throttle and throttle check valve RE 79/0.09 Replaces: 0.06 /6 Types MG and MK Size 6 to 0 Component series X Maximum operating pressure 5 bar Maximum flow 400 l/min K564- Table of contents Contents Page
More informationPressure reducing valve, direct operated
Pressure reducing valve, direct operated RE 26564/5.11 Replaces: 2.3 1/8 Type DR 6 DP Size 6 Component series 5X Maximum operating pressure 315 bar [4568 psi] Maximum flow 6 l/min [15.9 US gpm] H7743 Table
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationPressure reducing valve, pilot-operated. Type Z3DR. Contents. Features. RE Edition:
Pressure reducing valve, pilot-operated Type Z3DR RE 26874 Edition: 206-0 Size 0 Component series X Maximum operating pressure 350 bar Flow 20 l/min H8078 Features Sandwich plate valve Porting pattern
More informationAxial Piston Fixed Displacement Pump KFA
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Fixed Displacement Pump KFA RE 91 501/06.03 1/12
More informationTwin throttle check valve
win throttle check valve RE 7506/05. Replaces: 0.03 /8 ype ZFS Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 80 l/min H5556 able of contents Contents Page Features Ordering
More information1.3 HIGH PRESSURE SERIES
1.3 HIGH PRESSURE SERIES content Ordering Code 1.3.1 High Pressure Series Technical Information 1.3.2 Specifications 1.3.3 Hydraulic Fluids 1.3.4 Viscosity Range 1.3.5 Temperature Range 1.3.6 Seals 1.3.7
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 6 DP Nominal size 6 Series 5X Maximum operating pressure 315 bar (4600 PSI) Maximum flow 60 L/min
More informationRC /
3 Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly Technologies Pneumatics Service utomation Mobile Hydraulics 09.96 DZ 10,, 3 31 bar 600 L/min K 663- DZ 0 --/31M 1 3 6 7 DIN
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More information2-way flow control valve
-way flow control valve RE 8155/11.10 Replaces: 11.0 1/8 Type FRM Sizes 6 and 10 Component series 1X Maximum operating pressure 315 bar Maximum flow 60 l/min H501 Overview of contents Contents Page Features
More informationVariable Displacement Pump A4VG for closed circuits
RE 92 003/05.99 RE 92 003/05.99 replaces: 02.98 Variable Displacement Pump A4VG for closed circuits Sizes 28...250 Series 3 Nominal pressure 400 bar Peak pressure 450 bar A4VG...EP Index Features 1 Ordering
More informationAxial piston variable pump A7VO
Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program
More informationExternal Gear Pumps Series F
External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single
More informationAxial Piston Variable Pump A2VK
Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents
More information4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE)
4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OE) ype 4WRDE Nominal size to 35 Component series 5X Maximum operating pressure 3 bar
More informationCheck valve. Type S. Contents. Features. RE Edition: Replaces:
Check valve Type S RE Edition: - Replaces: - Sizes Maximum operating pressure bar Maximum flow l/min R8_ Features For threaded connection (screw-in thread) Leakage-free blocking in one direction Various
More informationAxial Piston Fixed Pump A17FNO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A17FNO RE 91510/03.10 1/12 Data sheet eries 10 ize 125 Nominal pressure 250 bar
More informationPressure relief valve, direct operated. Type DBD..K. Contents. Features. RE Edition:
Pressure relief valve, direct operated Type DBD..K RE 25715 Edition: 2015-06 Size 2 Component series 2X Maximum operating pressure 420 bar Maximum flow 2 l/min H8070 Features Screw-in cartridge valve 6
More informationPressure reducing valve, pilot operated. Type DR. Features. Contents. RE Edition: Replaces: 02.03
Pressure reducing valve, pilot operated Type DR RE 293 Edition: 2013-01 Replaces: 02.03 Sizes 10 and 2 Component series 1X; 4X Maximum operating pressure 31 bar Maximum flow 10 l/min H792 Features Contents
More informationPressure reducing valve, pilot operated Type DR
RE 6 9/0.0 Replaces: 0.0 Pressure reducing valve, pilot operated Type DR Nominal sizes 0 to Series Maximum operating pressure 0 bar Maximum flow 00 L/min K660-9 Type DR 0--/... Overview of contents Features
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
More informationHydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationIGP /117 ED INTERNAL GEAR PUMPS SERIES 10 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS HYDRAULIC SYMBOL
00/7 ED IGP INTERNAL GEAR PUMPS OPERATING PRINCIPLE IGP pumps are volumetric displacement pumps with internal gears, available in five sizes, each divided into a range of different displacement. The pumps
More informationFixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design
Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement
More informationAxial piston variable motor A6VM series 71
xial piston variable motor 6VM series 71 RE 91610 Edition: 06.2014 Replaces: 04.2013 Sizes 60 to 215 Nominal pressure 450 bar Maximum pressure 500 bar Open and closed circuits Features Variable motor with
More informationThrottle check valve. Type Z2FS. Features. Content. RE Edition: Replaces: 04.08
hrottle check valve ype Z2FS RE 27526 Edition: 205-0 Replaces: 04.08 Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 Features Sandwich
More informationAxial Piston Fixed Motor A2FNM for Fan Drives and Flywheel Mass
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FNM for Fan Drives and Flywheel Mass RE 91007/02.11 1/16 Data sheet Series 61
More informationAxial piston variable pump A10V(S)O Series 31
Axial piston variable pump A10V()O eries 31 RE 92701 Edition: 06.2016 Replaces: 01.2012 ize 18 (A10VO) izes 28 to 1 (A10VO) Nominal pressure 280 bar Maximum pressure 350 bar Open circuit Features Variable
More informationFlow sharing control block in mono block / sandwich plate design M6-15
Flow sharing control block in mono block / sandwich plate design M6-15 RE 64321 Edition: 01.2015 Replaces: 05.2012 Size 15 Series 3X Maximum operating pressure on pump side 350 bar on consumer side 420
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 07.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
More informationPressure relief valve, pilot-operated. Type ZDB and Z2DB. Contents. Features. RE Edition: Replaces: 10.05
Pressure relief valve, pilot-operated Type ZDB and ZDB RE 575 Edition: 06- Replaces: 0.05 Size 6 Component series 4X Maximum operating pressure 35 bar Maximum flow 60 l/min H7746 Features Sandwich plate
More informationAxial piston variable pump A10VO Series 32
Axial piston variable pump A10VO eries 32 RE 92705 Edition: 06.2016 Replaces: 01.2012 Optimized medium pressure pump for powerful machines izes 45 to 180 Nominal pressure 280 bar Maximum pressure 350 bar
More informationAxial Piston Variable Pump A18VLO Series 11
Axial Piston Variable Pump A18VLO eries 11 RE 92280 Issue: 06.2012 Replaces: 06.2009 ize 80 Nominal pressure 350 bar Maximum pressure 400 bar For commercial vehicles Open circuit Features Variable pump
More informationRadial piston motors for industrial applications MCR-D
Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450
More informationRadial piston motor for integrated drives MCR-H
Radial piston motor for integrated drives MCR-H RE 15199 Edition: 03.2017 Replaces: 12.2013 Frame size MCR3, MCR5, MCR10, MCR15, MCR20 Displacement 160 cc to 3000 cc Differential pressure up to 450 bar
More informationHydraulic Motor (Radial piston multi-stroke)
RE 15 207/03.94 Hydraulic Motor (Radial piston multi-stroke) Type MCR 10, Series 3X RE 15 207/02.98 Sizes 7 to1340 up to 450 bar up to 1340 cm 3 up to 27 Nm Replaces: 10.97 Compact, robust construction
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationAxial piston variable pump A4VSO for explosive areas ATEX II 3G ck IIC Tx
Axial piston variable pump A4VSO for explosive areas ATEX II 3G ck IIC Tx Part II of instruction manual according to ATEX directive 2014/34/EU Data Sheet RE 92050-01-X-2 Edition: 01.2017 Replaces: 04.2016
More informationAxial piston variable pump A4VSO for explosive areas ATEX II 3G c IIC T4
Axial piston variable pump A4VSO for explosive areas ATEX II 3G c IIC T4 Part II of instruction manual according to ATEX directive 94/9/EC Data Sheet RE 92050-01-X-2 Edition: 04.2015 Replaces: 10.2014
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationRadial piston motor for frame integrated drives MCR-A
Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationIPC Medium-Pressure Internal Gear Pumps Technical Data Sheet
IPC Medium-Pressure Internal Gear Pumps Technical Data Sheet Function 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial disc Axial
More informationThrottle and throttle check valve
Throttle and throttle check valve RE 79/0.09 Replaces: 03.06 /6 Types MG and MK Size 6 to 30 Component series X Maximum operating pressure 35 bar Maximum flow 400 l/min K3564- Table of contents Contents
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 09.2017 Replaces: 02.2017 High-pressure pump for applications in a closed circuit up to 500 bar ize 110 280 Nominal pressure 450 bar Maximum pressure
More informationAxial Piston Variable Pump A4VG
Axial Piston Variable Pump A4VG RE 92003/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Sizes 28...250 Nominal 400 bar Peak 450 bar Closed circuit Contents Ordering Code / Standard Program 2 Technical
More informationAxial Piston Variable Pump A15VSO
Axial iston Variable ump A15VSO RE 928/5.12 1/4 Replaces: 3.1 Data sheet Series 1 Sizes 175 to 28 Nominal pressure 35 bar Maximum pressure 42 bar Open circuit Contents Ordering code for standard program
More informationAxial piston variable pump A4VG Series 40
Axial piston variable pump A4VG eries 40 RE 92004 Edition: 02.2017 Replaces: 07.2016 High-pressure pump for applications in a closed circuit up to 500 bar ize 110...280 Nominal pressure 450 bar Maximum
More information