seating USA price list effective August 30 th 2010

Transcription

1 US price list effective ugust 30 th 2010 seating

2 finishes Laminates Maritime Maple M ouglas Pine P Moka PM hestnut G Honey HO Tigerwood TW Teak T ark Oak K herry H ayenne Maple M White W rost harcoal Kiwi KW Xpresso plastic finishes

3 index onditions & Garantees pplications General Specifications executive / task odyfit 14 onfo 19 otcom 22 lasto 30 Loveflex 36 Lovepop 43 Sentinel 47 Soft 50 Vista lounge / reception ramis thos yrano Lancelot Lancelot Platform Perceval Porthos Passenger Voyager Specifications: rms 8-9 Specifications: Mechanisms odification visitor / café -max 90 Minimax 92 Primax 94 Xpresso 97 general info executive / task lounge / reception visitor / café Wingo 56 lement 87 3

4 general info visitor / café lounge / reception executive / task conditions & garantees Prices and Payment ll prices shown in this price list are suggested retail prices and are subject to change without notice. Prices do not include installation and shipping costs. Taxes are extra. These prices are guaranteed for 30 days from the date of quotation and are firm and final after acceptance of the order. Orders are invoiced at the time of shipment. Terms of payment are net 30 days from date of invoice. ny products sold by rtopex shall remain its property until fully paid in cash. In the event that the purchaser defaults in the payment of any sum due to rtopex, or in the event the purchaser s financial condition becomes unsatisfactory to rtopex, rtopex reserves the right upon notice to the purchaser, to defer or discontinue shipment of any goods or, to refuse any order until such time as the default is corrected or the purchaser provides assurance of payment to rtopex. Orders rtopex requires that all orders be submitted in writing to avoid errors and/or duplication. The purchaser is responsible to submit complete orders. Incomplete or incorrect orders (finish colors missing ) will be processed upon reception of the complete information and normal production lead-time will be applied from the date that the complete information is received. cknowledgments Orders will be acknowledged with rtopex acknowledgement forms governing the transaction. The details appearing on this acknowledgment will describe the items to be shipped to the purchaser and the ready to ship date (not the actual shipping date). It is the purchaser s responsibility to verify that the acknowledgment information is correct. If not, the purchaser must notify rtopex within 48 hours in writing. ailure to provide corrections within 48 hours could be subject to extra charges (see hanges and ancellation). hanges and ancellations Order cancellations or changes are subject to acceptance by rtopex. Special order items and fabric-covered items (standard or OM fabrics) already in production are not subject to change or cancellation under any circumstances. ) Modifications : Standard product already in production will be subject to a 25% modification surcharge. hanges to the shipping date must be taken into consideration. ) ancellations : rtopex reserves the right to invoice the purchaser for any items already in production at the cancellation date and for lost profit on the remaining items. Storage rtopex reserves the right to invoice the purchaser for storage charges in specific cases. Shipping ) Prices are.o.. factory, collect. ) rtopex will choose the carrier unless otherwise specified by the purchaser. Goods will be handed over to the common carrier in good condition; rtopex liability ceases at this point. eliveries will be done at the purchaser s unloading dock. The purchaser should have an unloading dock able to accommodate 53 trailers and must supply the unloading personnel. ) laims : rtopex is not responsible for damage that occurs in transit or in storage. It is the purchaser s responsibility to examine goods upon receipt and to file any claims with the carrier. ailure to provide an adequate description of the lost items or damages to the carrier could result in the carrier s refusal to honor the charges. It is the purchaser s responsibility to obtain information on the carrier s claim policies and to send any claims to the carrier. or other policies, contact ustomer Service. ) It is the purchaser s responsibility to file any claims even if the order has been shipped directly to the client. Return of Goods ) No merchandise may be returned without rtopex written consent and shipping instructions. If this procedure is not followed, the merchandise will not be accepted by the factory and will be reshipped collect without further notice. ) Goods must be returned properly packaged and all boxes must be clearly marked with the authorization number. ) Return of items authorized by rtopex are subject to a charge of 25% plus freight (and customs, if applicable) and repair costs. Product Specifications rtopex reserves the right to modify the specifications of products, materials, design or accessories without notice. rtopex also reserves the right to cease production of any product at any time. The products, accessories, materials and finishes as described in the price list prevail over the content of brochures or folders. The weights and volumes shown on the price lists include packaging and are approximations. rtopex Lifetime Warranty rtopex warrants its products are free of defects in design, material and workmanship for as long as the original purchaser owns them. If written notice of the defect is given to rtopex within the applicable warranty period, rtopex will repair or replace with comparable product, at rtopex s choice, without charge to the original purchaser, any part or product shipped after July 1, 2001, which fails under normal use as a result of such defect. This warranty provides limits on the following products : Seating mechanisms, are warranteed for (5) five years of single shift usage from date of delivery. rtopex fabrics are warranteed for (5) five years from date of delivery. Moving and high wear parts such as covering materials/finishes, arm rests, chair bases, foam, wood framed seating products, stacking chairs, glides, casters, are warranteed for (5) five years of single shift usage from date of delivery. Non-standard specials, are warranteed for (1) one year from date of delivery. This warranty does not extend to : ustomer s Own Material (OM) or finishes applied to rtopex products. Products which have been modified or have not been installed or used according to rtopex application and installation guidelines. On products warranted for a specified number of years of single shift usage, the warranty period will be reduced in a pro-rata manner when the products are used in a manner that exceeds the equivalent of a single shift forty (40) hour work week. Products used 24/7 or in high traffic public spaces such as airports and hospitals are covered by the warranty for 1 year from the delivery date. This warranty is the ustomer s sole remedy for product defect. This warranty does not cover damage by a carrier in transit. rtopex makes no warranties, including the implied warranties of merchantability or fitness for a particular purpose, other than the expressed warranties contained herein. There are no other warranties express or implied. rtopex shall not be liable for consequential or incidental damages arising from any product defect. 4

5 applications rtopex chairs fulfill all of your company s needs. Refer to this grid to find the specific model that will match your needs. In the grid below you will find the page numbers of the chairs with their respective suggested applications. Lounge Reception Guest Task ramis thos Lounge hair used in a waiting room, entry hall or executive office. Use it in an environment to create an inviting ambiance and represent a corporate image. Reception This type of chair is used in a waiting room reception area to welcome visitors. Great flexibility due to the mobility of the chairs. Guest hair generally used to welcome a visitor at a work area. ertain executive chair types with a low back are an ideal addition to the executive s chair. Task hair requiring an ergonomic comfort level adapted for every day usage. Ideal for clerical work stations. Intensive Use Stool xecutive onference Training odyfit onfo yrano otcom lasto lement onvention & afé -max Lancelot Loveflex Lovepop Minimax Passenger Perceval Porthos Primax Sentinel Soft Vista Voyager Wingo Xpresso Stool Generally used for individuals working at taller work stations. ootrest included. xecutive xecutive chair, with a more distinguished look. vailable in high back and can be specified with high end components. onference hair used for a conference room, mobile and comfortable, with a look resembling an executive chair. Training hair suitable to frequent reorganization for training rooms. It is usually offered with a 4 leg base giving space underneath for storage. general info executive / task lounge / reception visitor / café Intensive Use hair with heavy duty components giving the highest level of ergonomic comfort possible, ideal for use within continuous work shifts (24 hours per day, 7 days per week). Warranty based on a forty (40) hour work week usage. See p.4. onvention & afé Lighter and stackable, this chair can be stacked on a transport cart and can generally be specified with special attachments to gang together with the adjoining chair. 5

6 specifications general info visitor / café lounge / reception executive / task Width specification or some Lounge series, you need to specify the width of the chair (number of seat positions). or the otcom chair, it is possible to specify a width for the seat. The prices indicated are for the Standard format (ode O2) and do not change except when the Large or "X-Large" style is specified. The chart below explains the specifications, codification and the variations of price depending on the format selected. otcom hair Seat width ack width Seat depth Wingo hair (seat & back) Seat & ack width 1 place rnchair 2 places Love seat Narrow Standard Large 3 places Sofa or the Wingo chair, it is possible to specify the size of chair (back and seat). The prices indicated are for the Standard format (ode Wi2) and do not change except when the Large format is specified. The chart below details this option. 17" (430 mm) 19" (483 mm) 21" (530 mm) Seat depth 17" (430 mm) 18" (455 mm) 18" (455 mm) ode Wi2 becomes Wi1 Wi2 Wi2 becomes Wi3 Price No change s listed dd $100 Height specification On certain chair series, you need to specify the height of the back. Low back (L) Narrow Standard Large X-Large 17" (430 mm) 19" (480 mm) 21" (530 mm) 23" (554 mm) 16½" (419 mm) 18½" (470 mm) 18½" (470 mm) 18½" (470 mm) 17" (430 mm) 18" (455 mm) 18" (455 mm) 18" (455 mm) ode O2 becomes O1 O2 O2 becomes O3 O2 becomes O4 Price No change s listed dd $75 dd $150 Sentinel hair (seat & back) Width seat & back Medium back (M) Standard irector back () Large 19¾" (502 mm) 21¾" (552 mm) epth (seat) 18½" (470 mm) 20½" (521 mm) ode S2 S2 becomes S3 Price s listed dd $50 High back (H) When you select the option to adjust the chair back height, you can easily adjust the back within a range of 3 (75mm) because of the click system (option R or on the mechanism). The rtopex chair structures vary depending on the series and the client s specification. Here is a list of the different types of structures : The Wood structure (seat) : Internal structure molded plywood covered in a polyurethane foam. The lex structure (back and/or seat) : Internal tubular steel structure or hardwood on which the Ultra-lex membrane is held and covered with a polyurethane foam. The anvas structure (back) : Internal structure of tubular steel that holds a nylon material covered with a polyurethane foam. The "Mesh" structure (back) : Internal structure of tubular steel on which is held a polyester net that also acts as the back fabric. The illustration below represents the construction of the lex and the Wood structure. Please note that both structures can be used for the seat. The "Wood" structure is not available for the back. Refer to the product information to better understand the choice of structure by chair model. Steel or hardwood frame Ultra-lex membrane Molded polyurethane foam Molded plywood "lex" abric abric Wood Moisture-wicking fiber Guaranteed for a longer life, the polyurethane foam meets the STM norms for high resilience on the majority of the series. On most of the seats, the foam is molded in order to respect the maximum ergonomic specifications. The Ultra-flex membrane is exclusive to rtopex. This technology offers an unprecedented comfort and an excellent work posture. It allows for even weight distribution wherever it comes in contact with the chair, eliminates pressure points and centers the pelvis on the chair. This creates better circulation, better posture and a much higher level of comfort. The moisture-wicking fiber (located between the polyurethane foam and fabric) prevents the accumulation of moisture from prolonged contact with the back/seat. eatures pictograms Moisture-wicking fiber Intensive use Ultra-lex membrane Various widths available Knock-down product GRNGUR certified certified product (ssociation of anadian rgonomists) 6

7 specifications rms & Mechanisms The information about these components can be found in detail on pages 8-9 (arms) and (mechanisms). 5-Prong ases The price listed refers to a chair equipped with a 5 pronged base in black nylon. The upcharge for a polished aluminum base is $85 and $200 for a wood base. The 5 pronged bases are offered in four models and certain ones can be ordered with a black or chrome finish. Refer to the specific information with each chair model for their codes and specifications. ZN ase Reinforced molded nylon with a rounded design, lightly textured black finish, 25 diameter (low back) or 27 (medium or high back). 2 footings. Z ase luminum alloy with a rounded design, polished finish, 25 diameter (low back) or 27 (medium or high back). 2 footings. Z ase luminum alloy with a rounded design, polished finish, with tip protectors in black nylon, 27 diameter. 2 footings. VN ase Molded reinforced nylon in a streamlined design, lightly textured black finish, 27 diameter. 2 3 /8" footings. V ase Streamlined aluminum alloy, polished finish, 27 diameter. 2 3 /8" footings. W ase lack steel structure covered with solid wood offered in the rtopex Wood finishes, 27 diameter. 2 3 /8" footings. TN ase (stool) Molded reinforced nylon with a rounded design, lightly textured black finish, 27 diameter /8" cylinder and 2" footings. 360 o footrest (18" dia.) with a chrome finish and adjustable height. T ase (stool) luminum alloy with a rounded design, polished finish, 27 diameter /8" cylinder and 2" footings. 360 o footrest (18" dia.) with a chrome finish and adjustable height. T ase (stool) luminum alloy with a rounded design, polished finish, with tip protectors in black nylon, 27 diameter /8" cylinder and 2" footings. 360 o footrest (18" dia.) with a chrome finish and adjustable height. Sled & 4-leg bases ases are specific to each series of chair. choice of black or chrome is offered on the majority of the series. hoice of footing offered on 4 leg base : 2 3 /8" casters (H or S) or glides. ooting Three types of footing are offered for the 5 pronged bases and on certain 4 footed bases : H caster for carpeting (2 diam.), in lightly textured black nylon with double drum. S caster for hard surfaces (2 diam.), lightly textured black, double drum with black center in nylon covered in ultra-soft urethane for an easier rolling motion. G glide (2 height), lightly textured black nylon. On the VN, V and W bases, the footing has a 2 3 /8" height. The sofas in the ramis, thos and Porthos series each have their own choice of footings. Refer to the specific information in each series for the details. Wood, Metal or Plastic finish Specification On certain chair models it is important to specify the color of the wood, metal and/or plastic. It is possible to have to choose several options when specifying the product, as an example the Xpresso where there is metal (base), plastic (back) and fabric (upholstered seat). or the wood, specify the finish of the chair components using the codes for the wood finishes on the rtopex Wood sample card. It is important to note that the wood is a natural material and because of its porosity and tint, the colors can differ from one product to another. lthough the color will be matching, wood patterns may differ from Standard esk's actual wood furniture finishes. The plastic colors available for the Xpresso series can be found on page 2. abric Specification rtopex offers more than 100 fabrics in different patterns and colors. They are divided into 6 grades from 0 to 5. leather program is also offered with 10 colors available. Refer to the fabrics represented on page 99. It is also possible to order chairs and sofas with the fabric supplied by the client with our program. The price will be the lowest price matching the chair selected, which means that the first column in the price list is used, then add the cost for options. Orders The orders with OM fabric (material supplied by the client) must have the following information clearly written indicating the color, the pattern, the width of the fabric and the manufacturer of origin. y request of ustomer Service, a sample piece sized 12 x12 (305 x 305mm) must be sent pre-paid to rtopex ustomer Service at the following address: RTOPX, 800 Vadnais, Granby, Qc, anada, J2J 17. Once the sample is approved, ustomer Service will confirm the instructions to follow on how to ship the fabric to our factories. list of complementary fabrics (tested and pregraded ) is available at com. Whether the fabric is supplied by the client or by rtopex (depending on the client s request) the ship date can only be committed to after rtopex receives the fabric. rtopex is not responsible for the quality and durability of any fabrics not within our standard product lines. order pricing: see the first column of the fabric grades. Packaging The chairs are covered with a clear plastic bag and delivered individually in a carton or in a bag when they have a rigid bottom (loveseats and sofas). The chairs can be unassembled (back separate from seat) depending on the mechanism selected. The stacking chairs can have several packaged in one carton. general info executive / task lounge / reception visitor / café 7

8 arms general info No arms ixed arms Generic arm losed upholtered arm Open upholstered arm visitor / café lounge / reception executive / task N T G S X O ramis thos odyfit onfo yrano otcom lasto -max / Minimax / Primax Lancelot Loveflex Lovepop Passenger / Voyager -- Perceval Porthos Sentinel Soft Vista Wingo Xpresso N - No arms Option available on most chairs except for ramis, thos, Perceval and Porthos. T - Open urethane arm rm made with a steel bar reinforced with a steel shaft covered in urethane. irmness (3/5) medium firm. Total width adjustable to 3 (75mm) on certain models only. G - Open urethane arm rm made with a steel bar reinforced with a steel shaft covered in urethane. irmness (4/5) medium firm. Total width adjustable to 3 (75mm) on certain models only. - losed urethane arm rm made with a steel bar reinforced with a steel shaft covered in urethane. irmness (4/5) medium firm. Total width adjustable to 3 (75mm) on certain models only. S - luminum & nylon arm rm made in a one piece molded nylon joined to a brushed aluminum tube. irmness (5/5) firm. Not adjustable. X - ixed generic arm vailable on certain models of chairs, style varies. irmness depending on model. Not adjustable. (lasto and -max arms shown) - losed upholstered arm Specific to model of chair, this arm is made of a steel and/ or wood structure upholstered in a polyurethane foam and fabric matching the rest of the chair. irmness (2/5) firm, not adjustable. (odyfit arm shown) O - Open upholstered arm Specific to model of chair, this arm is made of a steel and/ or wood structure upholstered in a polyurethane foam and fabric matching the rest of the chair. irmness (2/5) firm, not adjustable. (odyfit arm shown) 8

9 djustable arms S Z W G R X Y - djustable arm rm made of nylon, steel attached with urethane armrest. irmness (3/5) medium. Height adjustable of 3 (75mm) with a small lever. S - djustable arm rm made of nylon, steel attached with urethane armrest. irmness (3/5) medium. Height adjustable of 3 (75mm) with a push-in button. W - djustable arm with pivot rm made of nylon, steel attached with T-shaped urethane armrest. irmness (3/5) medium. Pivot of 30 to +30, height adjustable of 3 (75mm) with a small lever and width adjustable (on certain models) of a total of 3 (75mm). W rm pivot adjustment ramis odyfit onfo thos yrano otcom lasto -max / Minimax / Primax Lancelot Loveflex Lovepop Passenger / Voyager Perceval Porthos Sentinel Soft Vista Wingo Z - djustable arms with multi-axis and pivot armrests rm made of polished aluminum and nylon, polished aluminum attachment with urethane T armrest. irmness (3/5) medium. Height adjustment of 2¾ (70mm) with push-in button, front/ back adjustment of 2 (50mm) and pivot of -30 o to +30 o. Xpresso G - djustable arm rm made of nylon, steel attached with -shaped urethane armrest. irmness (3/5) medium. Height adjustable of 3 (75mm) with a small lever and width adjustable (on certain models) of a total of 3 (75mm). R - djustable arm rm made of nylon, steel attached with T-shaped urethane armrest. irmness (3/5) medium. Height adjustable of 3 (75mm) with a small lever and width adjustable (on certain models) of a total of 3 (75mm). X - djustable rms with multi-axis and pivot armrests rms with mutli-axis armrests (front-back adjustment of 2 (50 mm) and lateral adjustment of 1½ (38 mm) ), made of nylon, steel attachment with urethane armrest. irmness (3/5) medium. Height adjustment of 3 (75mm) with small level and width adjustment (on certain models) of 3 (75mm) in total. Y - djustable arms with multi-axis and pivot armrests rms with mutli-axis armrests (front-back adjustment of 2 (50 mm) and lateral adjustment of 1½ (38 mm) ), made of nylon, steel attachment with urethane T armrest. irmness (3/5) medium. Pivot of -30 to +30, Height adjustment of 3 (75mm) with small level and width adjustment (on certain models) of 3 (75mm) in total. Multi-axis armrest general info executive / task lounge / reception visitor / café Lateral adjustment ront-to-back adjustment 9

10 mechanisms general info visitor / café lounge / reception executive / task 14 choices of mechanisms are offered on the rtopex chairs. The grid below illustrates which ones can be specified for each chair model, refer also to the information lower down and on the following page for the descriptions on how they function. Mechanism code hair odyfit onfo otcom lasto Loveflex Lovepop Sentinel Soft Vista Wingo ack angle SRW hair tilt Mechanism listing & escription Pivot on column axis Height adjustment Mechanisms #10 & o swivel on column axis. Height adjustable (screw). Mech. 10 compatible with the seat slide and adjustable back height option (S, R and ). Seat angle GS Mechanisms #11 & o swivel on column axis. Height adjustable (gas cylinder). Mech. 11 ompatible with the seat slide and adjustable back height option (S, R and ). Gas cylinder and screw column The 11, 15, 21, 25, 31, 41, 51 and 71 are equipped with a gas cylinder with a 5½ travel (140mm) and a pressure of 300 Newton. When the seat slide option is selected (S), the travel for the 41 and 71 mechanism becomes 4 (100mm). The 81 and 85 mechanism are equipped with a gas cylinder with a 4 (100mm) travel The 10, 14, 20 and 24 mechanisms are equipped with a screw column (manual adjustment) and the travel is 5 (125mm). ack height adjustment option (option R) It is possible to specify this option on certain mechanisms. This one is equipped with a 3 (75 mm) height adjustment to the back. dd R after the code for the mechanism (ex. Mechanism #21 becomes #21R). n upcharge of $25 will be added. Seat sliding option (option S) It is possible to specify this option on certain mechanisms, this is equipped with a front-to-back seat sliding adjustment of 2½ (64 mm), allowing for variable depths to the seat. dd S after the code for the mechanism (ex. Mechanism #21 becomes #21S). n upcharge of $50 will be added. ack height adjustment & Seat sliding options (option ) It is possible to combine these two options on certain mechanisms. dd to the code for the mechanism (ex. Mechanism #21 becomes #21). n upcharge of $75 will be added. SRW Mechanism # o swivel on column axis. Height adjustable (screw). hair tilts towards back from 3 to 20 (center pivot). Tilt lock to one position, to 3. djustable tilt tension. ompatible with the seat slide and adjustable back height option (S, R and ). 10

11 general info executive / task lounge / reception visitor / café mechanisms GS SRW GS Mechanism # swivel on column axis. Height adjustable (gas cylinder). ackward tilt from 3 to 20 (center pivot). Tilt lock to one position, at 3. djustable tilt tension. ompatible with the seat slide and adjustable back height option (S, R and ). Mechanism # swivel on column axis Height adjustable (screw). ackward tilt from 3 to 18 (center pivot). djustable tilt tension. Tilt lock in all positions. Mechanism # swivel on column axis. Height adjustable (gas cylinder). ackward tilt from 3 to 18 (center pivot). djustable tilt tension. Tilt lock in all positions. SYNHRO GS GS GS Mechanism # swivel on column axis. Height adjustable (gas cylinder). ackward tilt from 3 to 18 (center pivot). djustable tilt tension. Tilt lock to one position, at 3. djustable angle on back from 86 to 121. ompatible with the seat slide and adjustable back height option (S, R and ). Mechanism # swivel on column axis. Height adjustable (gas cylinder). Synchro tilt of seat from 1 to 10 (center pivot) and of back from 90 to 110. djustable tilt tension. Tilt lock in 5 positions. ompatible with the seat slide and adjustable back height option (S, R and ). Mechanism # swivel on column axis. Height adjustable (gas cylinder). ackward tilt from 3 to 17 (center pivot). djustable tilt tension. Tilt lock in all positions. djustable angle on back from 80 to 108. ompatible with the seat slide and adjustable back height option (S, R and ). SYNHRO RONT TILT RONT TILT GS GS GS Mechanism # swivel on column axis. Height adjustable (gas cylinder). 20 o backward chair tilt starting from initial position (ranging from -4 o to 5 o ). djustable tilt tension. Tilt lock in all positions. djustable angle on back from 89 to 105. ompatible with the seat slide and adjustable back height option (S, R and ). Mechanism # swivel on column axis. Height adjustable (gas cylinder). Synchro tilt of seat from 2 to 11 (front pivot) and of back from 85 to 105. djustable tilt tension. Tilt lock in 5 positions. ompatible with the adjustable back height (option R). Mechanism # swivel on column axis. Height adjustable (gas cylinder). ackward tilt from 1 to 14 (front pivot). djustable tilt tension. Tilt lock in 5 positions. 11

12 general info codification ach chair has a codification zone which explains the information that has to be indicated on the order. Listed below is a list of information on codification necessary to build a chair according to your needs. Please take note that the black encircled numbers are not always associated with the same codes and they depend on the chair being specified. losely read the codification line particular to each model of chair. SPIIY Height. Struct. ase Mec. Option rms ooting Wood abric Sec.. Wi visitor / café lounge / reception executive / task Series Generally already written in the codification line, this segment identifies the collection or product line. Width the width of the chair for the Sentinel & Wingo series, the width of the seat for the otcom series or the number of places for certain lounge series. Height the back height. selection is offered on the majority of chairs, refer to the information specific to that chair model. the type of structure for your chair. selection is offered on the majority of chairs, refer to page 6 for the different descriptions on the types of structures along with the information specific to that chair model. ase the base that you want for your chair. Several choices are offered on a majority of chairs, refer to page 7 for the descriptions of the different bases. Refer to the information specific to that chair model for their availability. Mechanism which mechanism to install on your chair. You are offered a variety on the chairs with a 5-prong base, refer to pages for their description and the availability of the different mechanisms along with the information specific to that chair model. djustment Options ertain adjustment options can be added to different mechanisms such as the front-to-back seat slide (S), height adjustment with a click system (R) or a combination of both options (). or the information on these options, refer to page 10 along with the information specific to that chair model. rms wide selection is offered on the majority of chairs. The prices are marked for the chairs without arms (with the exception of certain models), it is important to specify the type of arm to be installed on your chair. or the descriptions and availability of the different arms, refer to pages 8 9 and to the information specific to that chair model. ooting the type of footing to be installed on your chair (casters, leveling glides, etc.). The choice can vary from one chair to the other. Refer to page 7 for the description of the different types of footings along with the information specific to that chair model Wood - Laminate - Metal - Plastic the finish on the visible wood components of your chair (footing), laminate, the metal and/or the plastic. This choice is available on certain chairs only and is required in relation to the components selected. Refer to page 2 for the laminate and plastic finishes (Xpresso). Refer to the rtopex Wood sample card for wood finishes. abric (or "Main" abric) the choice of fabric for your chair. or certain chair models, you can specify 2 fabrics, an outline explains what portion of the chair is manufactured with the Main fabric and which with the Secondary fabric. To visualize the different fabrics, refer to pages 99 to 101 of this list or the rtopex chair fabric cards. Secondary abric (or ccents) ertain models offer the possibility to combine two fabrics on the same chair. Refer to the information specific to that chair model to understand which components are affected by this choice. To visualize the different fabrics, refer to pages 99 to 101 of this list or the rtopex chair fabric cards. 12

13 codification examples Series: lement Shape: 18" Square ootings: Hard wheel asters abric: Open House (OH93) *Optional stitching (curves) Series: otcom, standard seat width ack height: irector :, ase: lack nylon ZN Mechanism: #21 rms: G ooting: Soft wheel casters abric: Matrix (MX42) Series: lasto ack height: Low : lex seat, ase: 4 legs rms: ixed X lasto arms ooting: Hard wheel casters Metal: lack base Seat fabric: Midnight (OH25) ack fabric: ark lue (K05) Series: Minimax : Upholstered seat & back ase: Sled rms: X Minimax Metal: hrome (base) abric: Tan vinyl (VM60) Series: Porthos, love seat rms: ooting: Wood footing, Medium herry finish abric: olta (O12) Series: Wingo, large format ack height: High : lex seat, ase: luminum/ lack Mechanism: #31 + Seat sliding option (S) rms: W djustable ooting: Hard wheel casters abric: lack leather (M02) ccents: ark Silver Gray (K01) N - PS H This pouf's list price will be $437. Height Struct. OH93 O2 - W - ZN 21 - G - S - MX42 This chair's list price will be $703. L - L X - H - N - OH25 - K05 Mi - UU X - - VM60 PT2 - - W - W82 - O12 OPTION - ST ase Mec. rms ooting abric ase rms Metal abric This chair's list price will be $347. rms ooting Wood abric This love seat's list price will be $2100. Height Struct. ase rms ooting Metal Seat. This chair's list price will be $910. Struct. Height. Struct. ase Mec. Option rms ooting abric ccent Wi3 - H - Z 31 S - W - H - M02 - K01 This chair's list price will be $1781. ooting abric Stitching ack. general info executive / task lounge / reception visitor / café 13

14 general info visitor / café lounge / reception executive / task bodyfit Specifications: odyit series chairs feature a monoshell construction and are available with a low, medium or high back. The seat is a tubular steel frame webbed with Ultra-lex membrane and topped with a high density polyurethane foam slab or with molded plywood covered with high density polyurethane foam. The seat fitted with an adjustable mechanism attaches to a 5-prong base by a gas cylinder or screw mounted column. The side chair is available with either a sled or 4-leg base. On the 5-prong bases, adjustable arms (W, R, G, X and Y) or fixed arms (T, G and ) have width adjustability. These chairs are individually packaged in a box. Height (back) L Low ase M Medium ZN (black nylon) VN (black nylon) TN (stool, black nylon) 01 (sled) Mechanism H High 14 Height adjustment (screw) 15 Height adjustment (gas) 24 Height adjustment (screw), all-position tilt 25 Height adjustment (gas), all-position tilt 85 Height adjustment (gas), 5 position tilt 2 Z (polished aluminum) dd $85 04 (4-leg) (back & seat) W V (polished aluminum) dd $85 T (stool, pol. alu.) dd $85 lex seat Z (pol. alu. & black) dd $85 W (wood) dd $200 T (stool, pol. alu. & black) dd $ odification: rms NO arms N IX arms T dd $80 ooting Height Struct. ase Mec. rms ooting Wood abric odification example: Medium back chair, structure, Z base, mechanism #25, W adjustable arms, soft wheel casters and MX91 fabric. This chair's list price is $790. H Hard wheel casters for soft surfaces ode : -M-Z25-W-S-MX91 G dd $80 JUSTL arms W dd $80 dd $80 S Soft wheel casters for hard surfaces R dd $80 dd $300 G Glides Wood (if applicable) or Metal (sled bases & 4-leg bases) O dd $300 If applicable, specify the finish for the wood base (refer to the rtopex Wood sample card) or specify the finish for the Sled & 4-legged bases, code N: lack or : hrome (+$30) abric Info on pictograms, see p.6. X dd $130 Y dd $130 G dd $80 Refer to the rtopex Seating abrics sample cards. rench seams on chairs covered with vinyl or leather (fabrics VM, O & M). 14

15 bodyfit : 24" (610 mm) : 23½" (597 mm) : 32½" (826 mm) : 18½" (470 mm) : 19¼" (489 mm) : 18½" (470 mm) ase: 5-Prong ack height: Low 40.0 lb (18.2 kg) 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) : 26" (660 mm) : 27½" (699 mm) : 36¼" (921 mm) : 18½" (470 mm) : 19¼" (489 mm) : 18½" (470 mm) W ase: 5-Prong ack height: Medium 46.0 lb (20.9 kg) 15.8 u.t. (0.5 m 3 ) abric 1.6 yd (1.5 m) lex seat - L W Struct. ase Mec. rms ooting abric : W or ase: ZN (no charge) or Z (+$85). On the low-back chair, these bases have a 25" diameter. Mechanism: 14, 15, 24, 25 or 85. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130).,O (+$300). ooting: H, S or G. abric: rtopex seating fabrics. lex seat ex back Struct. Mechanism Mechanism ase Mec. rms ooting Wood abric - M , 15, 24, , 15, 24, , 15, 24, , 15, 24, : W or ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 14, 15, 24, 25 or 85. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130).,O (+$300). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 15

16 bodyfit general info ase: 5-Prong ack height: High Mechanism W 14, 15, 24, lex ack visitor / café lounge / reception executive / task : 26" (660 mm) : 27½" (699 mm) : 47" (1194 mm) : 18½" (470 mm) : 19¼" (489 mm) : 18½" (470 mm) 49.0 lb (22.3 kg) 19.4 u.t. (0.6 m 3 ) abric 2.0 yd (1.8 m) : 26" (660 mm) : 23½" (597 mm) : 42" (1067 mm) : 28" (711 mm) : 19¼" (489 mm) : 18½" (470 mm) ase: 5-Prong, Stool ack height: Low 37.0 lb (16.8 kg) 23.3 u.t. (0.7 m 3 ) abric 1.4 yd (1.3 m) lex seat W lex seat 14, 15, 24, Struct. ase Mec. rms ooting Wood abric - H : W or ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 14, 15, 24, 25 or 85. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130).,O (+$300). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics Mechanism Struct ase rms ooting - L abric : W or ase: TN (no charge). T or T (+$85). rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. abrics: rtopex seating fabrics. 16

17 bodyfit : 21¾" (552 mm) : 23½" (597 mm) : 32½" (826 mm) : 18½" (470 mm) : 19¼" (489 mm) : 18½" (470 mm) ase: Sled ack height: Low 29.0 lb (13.2 kg) 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) : 21¾" (552 mm) : 27½" (699 mm) : 36¼" (921 mm) : 18½" (470 mm) : 19¼" (489 mm) : 18½" (470 mm) ase: Sled ack height: Medium 32.0 lb (14.5 kg) 15.8 u.t (0.5 m 3 ) abric 1.6 yd (1.5 m) W lex seat W lex seat L : W or rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. Struct. rms Metal abric Struct. rms Metal abric - M : W or rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 17

18 bodyfit general info ase: 4-Leg ack height: Low W visitor / café lounge / reception executive / task : 20½" (521 mm) : 23½" (597 mm) : 32½" (826 mm) : 18½" (470 mm) : 19¼" (489 mm) : 18½" (470 mm) 28.0 lb (12.7 kg) 15.8 u.t. (0.45 m 3 ) abric 1.4 yd (1.3 m) : 20½" (521 mm) : 27½" (699 mm) : 36¼" (921 mm) : 18½" (470 mm) : 19¼" (489 mm) : 18½" (470 mm) ase: 4-Leg ack height: Medium 31.0 lb (14.1 kg) 19.4 u.t. (0.55 m 3 ) abric 1.6 yd (1.46 m) lex seat W lex seat L Struct. rms ooting Metal abric : W or rms: N (no charge). T, G, (+$80)). ooting: H, S or G. Metal: ase finish N (noir) or (chrome, +$30). abric: rtopex seating fabrics Struct. rms ooting Metal abric - M : W or rms: N (no charge). T, G, (+$80). ooting: H, S or G. Metal: ase finish N (noir) or (chrome, +$30). abric: rtopex seating fabrics. 18

19 confo Specifications: The onfo series is available in a medium or high back chair. The back is made of a tubular steel frame covered by a PV membrane and moisture-wicking fiber layer. The seat is made of molded plywood topped with molded polyurethane foam. The seat is fitted with an adjustable mechanism and attaches to a 5-prong base by a gas cylinder or screw mounted column, it is also available with a sled base (offered in the medium back only). These chairs are individually packaged in a box. Height (back) M Medium ase H High ZN (black nylon) VN (black nylon) 01 (sled, black) Mechanism 2 Z (polished aluminum) dd $85 V (polished aluminum) dd $85 Z (pol. alu. & black) dd $85 10 Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt Option WN anvas back W (wood) dd $200 S ront-to-back seat sliding option (available on all mechanisms, add $50). odification: Height Struct. ase Mec. Option rms ooting Wood Main. Sec odification example: High back chair, WN structure, V base, mechanism 31 with "S" option, S fixed arms, soft wheel casters, main fabric M42 (leather) & secondary fabric VM42. This chair's list price is $ rms NO arms N ode : -HWN-V31S-S-S-M42-VM42 ooting H Hard wheel casters for soft surfaces Wood (if applicable) IX arms G dd $80 JUSTL arms S dd $80 dd $80 dd $80 abric : Main & Secondary abrics (if applicable) S dd $80 If applicable, specify the wood finish for the base. Refer to the rtopex Wood sample card. Main fabric (seat & back) and if desired, a Secondary fabric (seat sides & back of backrest). The highest fabric grade indicates pricing. Main fabric overs backrest and seat Info on pictograms, see p.6. S Soft wheel casters for hard surfaces G Glides Z dd $130 Optional secondary fabric If desired, specify a different fabric for the back of backrest ans sides. (Grades 0 & 1 only.) general info executive / task lounge / reception visitor / café *If the Main fabric is leather and a Secondary fabric has been specified (gr. 0 or 1), substract $

20 confo general info ase: 5-Prong ack height: Medium Mechanism 10, 11, 20, WN visitor / café lounge / reception executive / task : 25½" (648 mm) : 24½" (622 mm) : 37" (940 mm) : 18½" (470 mm) : 19¾" (502 mm) : 18" (457 mm) 49.0 lb (22.3 kg) 15.6 u.t. (0.4 m 3 ) abric 2.3 yd (2.3 m) ase: 5-Prong ack height: High : 25½" (648 mm) : 26½" (673 mm) : 43¾" (1111 mm) : 18½" (470 mm) : 19¾" (502 mm) : 18" (457 mm) 50.5 lb (23.0 kg) 18.6 u.t. (0.5 m 3 ) abric 3.5 yd (3.2 m) anvas back WN anvas back - MWN , ase Mec. Option rms ooting Wood Main. Sec.. ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41 or 51. Option: S (Seat slider, +$50). rms: N (no charge). S,, G,, S (+$80). Z (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to rtopex Wood sample card. Main fabric: rtopex seating fabrics. Secondary fabric: If desired, specify secondary fabric, refer to rtopex seating fabrics. *If the main fabric is leather and a secondary fabric has been specified (gr. 0 or 1), substract $125. Mechanism 10, 11, 20, , ase Mec. Option rms ooting Wood Main. Sec.. - HWN ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41 or 51. Option: S (Seat slider, +$50). rms: N (no charge). S,, G,, S (+$80). Z (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to rtopex Wood sample card. Main fabric: rtopex seating fabrics. Secondary fabric: If desired, specify secondary fabric, refer to rtopex seating fabrics. *If the main fabric is leather and a secondary fabric has been specified (gr. 0 or 1), substract $

21 confo : 24¾" (629 mm) : 24½" (622 mm) : 38¾" (984 mm) : 18" (457 mm) : 19¾" (502 mm) : 18" (457 mm) ase: Sled ack height: Medium 43.7 lb (19.9 kg) 18.6 u.t. (0.5 m 3 ) abric 2.5 yd (2.3 m) WN anvas back rms Main. Sec.. - MWN N - - rms: N (no charge). G,, S (+$80). Main fabric: rtopex seating fabrics. Secondary fabric: If desired, specify secondary fabric, refer to rtopex seating fabrics. *If the main fabric is leather and a secondary fabric has been specified (gr. 0 or 1), substract $125. general info executive / task lounge / reception visitor / café 21

22 general info visitor / café lounge / reception executive / task dotcom Specifications: The otcom chair is available in three seat widths and four back heights (low, medium, "director" or high). The wood structure is composed of molded plywood with molded foam (seat) or slab (back). The lex structure is comprised of a tubular steel frame webbed with an Ultra-lex membrane, molded foam (seat) or foam slab (back) and a moisture-wicking fiber layer. The lex seat and back are upholstered with removable fabric slipcovers. The seat is fitted with an adjustable mechanism and attaches to a 5-prong base by a gas cylinder or screw mounted column, it is also available with a sled base (offered in the medium back only). On the 5-prong base, the adjustable arms (G, R, W, X and Y) and the fixed arms (T, G and ) have width adjustability. These chairs are individually packaged in a box. Width (seat) On chairs with 5-prong bases 1 Narrow (-2") (seat & back) W ase 22 2 Standard ZN (black nylon) VN (black nylon) TN (stool, black nylon) 01 (sled) 3 Large (+2", +$75) lex seat Z (polished aluminum) dd $85 V (polished aluminum) dd $85 T (stool, polished alu.) dd $85 04 (4-leg) 4 (W) X-Large (+4", +$150) 2 Height (back) L Low irector M Medium Z (pol. alu. & black) dd $85 W (wood) dd $200 Option (options "S" & "" not available on mechanism #81) H High T (stool, pol. alu. & black) dd $85 R Ratchet back height adjustment option (add $25). S ront-to-back seat sliding option (add $50). ront-to-back seat sliding and ratchet back height adjustment options (add $75) odification: Width Height. Struct. ase Mec. Option rms ooting Wood abric O odification example: hair with "Large" seat, medium back, W structure, VN base, mechanism #51, T fixed arms, hard wheel casters and L00 fabric. This chair's list price is $773. Mechanism ode : O3-MW-VN51-T-H-L00 10 Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt 71 Height adjustment (gas), seat & back angle, all-position tilt 81 Height adjustment (gas), synchro seat/back frontal 5 position tilt (Options "S" & "" not available on mechanism 81) rms NO arms N JUSTL arms W dd $80 ooting H Hard wheel casters for soft surfaces R dd $80 IX arms T dd $80 G dd $80 G dd $80 G Glides Wood (if applicable) or Metal (sled base or 4-leg base) dd $80 If applicable, specify the finish for the wood base (refer to the rtopex Wood sample card) or specify the finish for the Sled & 4-legged bases, code N: lack or : hrome (+$30). abric Info on pictograms, see p.6. S Soft wheel casters for hard surfaces X dd $130 Y dd $130 Refer to the rtopex Seating abrics sample cards. rench seams on chairs covered with vinyl or leather (fabrics VM, O & M).

23 dotcom * : 26" (660 mm) : 24" (610 mm) : 33¼" (845 mm) : 16¼" (413 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: 5-Prong ack height: Low * 42.0 lb (19.1 kg) 15.8 u.t. (0.5 m 3 ) abric* 1.4 yd (1.3 m) * Seat width: Standard W lex seat Mechanism 10, 11, 20, , 51, , 11, 20, , 51, Width Struct. ase Mec. Option rms ooting abric O - L Width (seat): 1 (narrow), 2 (standard), 3 (large, +$75) or 4 (X-large, +$150, on W only) : W or. ase: ZN (no charge) or Z (+$85). On the low-back chair, these bases have a 25" diameter. Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G or (+$80). X or Y (+$130). ooting: H, S or G. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 23

24 dotcom general info ase: 5-Prong ack height: Medium Mechanism 10, 11, 20, W visitor / café lounge / reception executive / task * : 26" (660 mm) : 24" (610 mm) : 39¼" (997 mm) : 16¼" (413 mm) : 19½" (495 mm) : 17¼" (438 mm) * 44.0 lb (20.0 kg) / 20.1 u.t. (0.6 m 3 ) abric* 1.6 yd (1.5 m) * Seat width : Standard lex seat 41, 51, , 11, 20, , 51, Width Struct. ase Mec. Option rms ooting Wood abric O - M Width (seat): 1 (narrow), 2 (standard), 3 (large, +$75) or 4 (X-large, +$150, on W only) : W or. ase: ZN or VN (no charge). Z, Z or V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G or (+$80). X or Y (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. 24

25 dotcom * : 26" (660 mm) : 24" (610 mm) : 43" (1092 mm) : 16¼" (413 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: 5-Prong ack height: irector * 44.0 lb (20.0 kg) 20.1 u.t. (0.6 m 3 ) abric* 1.9 yd (1.7 m) * Seat width : Standard W lex seat Mechanism Width Struct. 10, 11, 20, , 51, , 11, 20, , 51, ase Mec. Option rms ooting Wood abric O Width (seat): 1 (narrow), 2 (standard), 3 (large, +$75) or 4 (X-large, +$150, on W only) : W or. ase: ZN or VN (no charge). Z, Z or V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G or (+$80). X or Y (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 25

26 dotcom general info ase: 5-Prong ack height: High Mechanism 10, 11, 20, W lex ack 41, 51, visitor / café lounge / reception executive / task * : 26" (660 mm) : 24" (610 mm) : 46¼" (1175 mm) : 16¼" (413 mm) : 19½" (495 mm) : 17¼" (438 mm) * 46.0 lb (21.0 kg) 20.3 u.t. (0.6 m 3 ) abric* 2.1 yd (1.9 m) * Seat width : Standard lex seat , 11, 20, , 51, Width Struct. ase Mec. Option rms ooting Wood abric O - H Width (seat): 1 (narrow), 2 (standard), 3 (large, +$75) or 4 (X-large, +$150, on W only) : W or. ase: ZN or VN (no charge). Z, Z or V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G or (+$80). X or Y (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood card. abric: rtopex seating fabrics. 26

27 dotcom : 22¼" (565 mm) : 24" (610 mm) : 34" (864 mm) : 17" (432 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: Sled ack height: Low 40.0 lb (18.2 kg) / 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) : 22¼" (565 mm) : 24" (610 mm) : 40" (1016 mm) : 17" (432 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: Sled ack height: Medium 42.0 lb (19.1 kg) 20.1 u.t. (0.6 m 3 ) abric 1.6 yd (1.5 m) W lex seat W lex seat Struct. rms Metal abric O2 - L : W or. rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics Struct. rms Metal abric O2 - M : W or. rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 27

28 dotcom general info ase: 4-Leg ack height: Low W visitor / café lounge / reception executive / task : 22¼" (565 mm) : 24" (610 mm) : 34" (864 mm) : 17" (432 mm) : 19½" (495 mm) : 17¼" (438 mm) 37.0 lb (16.8 kg) 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) Model with casters illustrated, also available on glides, chair will be same height. : 22¼" (565 mm) : 24" (610 mm) : 40" (1016 mm) : 17" (432 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: 4-Leg ack height: Medium 42.0 lb (19.1 kg) 20.1 u.t. (0.6 m 3 ) abric 1.6 yd (1.5 m) lex seat W lex seat O2 - L : W or. rms: N (no charge). T, G, (+$80). ooting: H, S or G. Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. Struct. rms ooting Metal abric Struct. rms ooting Metal abric O2 - M : W or. rms: N (no charge). T, G, (+$80). ooting: H, S or G. Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. Model with casters illustrated, also available on glides, chair will be same height. 28

29 dotcom ase: 5-Prong, Stool ack height: Low : 26" (660 mm) : 24" (610 mm) : 43½" (1105 mm) : 26½" (673 mm) : 19½" (495 mm) : 17¼" (438 mm) 53.0 lb (24.1 kg) 23.3 u.t. (0.7 m 3 ) abric 1.4 yd (1.3 m) W lex seat Mechanism Width Struct. ase Mec. Option rms ooting abric O - L Width (seat): 1 (narrow - recommended) or 2 (standard). : W or. ase: TN (no charge), T or T (+$85). Mechanism: 11, 31 or 51 *On mechanisms #31 and #51 the backward tilt function has been removed for safety reasons. Only the seat angle adjustment is possible on the #51 mechanism. Option: R (+$25). rms: N (no charge). W, R, G, T, G, (+$80). X or Y (+$130). ooting: H, S or G. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 29

30 general info visitor / café lounge / reception executive / task elasto Specifications: The lasto chairs are available with a low, medium, "director" or high back. The seat is comprised of a tubular steel frame webbed with an Ultra-lex membrane and covered with a polyurethane high density foam slab that is again upholstered in a stretchy and removable cover. xclusive to lasto, the fabric for the seat back is specially made to be as flexible as the Ultra-lex membrane. The back of polyester foam is comprised of tubular steel wrapped with polyester ( Mesh ) fabric. The headrest on the high back style is of molded polyurethane. The chair is equipped with a 5-prong base and gas cylinder or screw column. The visitor chair comes with a 4-leg base that can be equipped with casters. These chairs are individually packaged in a box. Height (back) L Low ase M Medium VN (black nylon) Mechanism irector (seat & back) lex seat lex seat Mesh back H High V (polished aluminum) dd $85 04 (4-leg) 10 Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt 81 Height adjustment (gas), synchro seat/back frontal 5 position tilt (Option "S" not available on mechanism 81) odification: 10 L - rms N Height Struct. ase Mec. Option rms ooting Metal Seat. ack odification example: High back chair, structure, V base, mechanism #21, X fixed arms, soft wheel casters, chrome finished arm structure, MX91 fabric. This chair's list price is $1141. NO arms ooting H Hard wheel casters for soft surfaces Metal ode : L-H-V21-X-S--MX91 IX arms X dd $80. the visible structure's finish (legs and/or arms). N (black) (chrome arms) +$25 (chrome arms & legs) +$50 abric : Seat & ack abrics G Glides seat fabric as well as back fabric. Refer to the rtopex Seating abrics sample cards. Pricing will be determined by the highest fabric grade. Seat abric ( abric) Info on pictograms, see p.6. Mesh abric (black) ack ( structure) S Soft wheel casters for hard surfaces ack abric (, "Reverse" fabric) 5 Option S ront-to-back seat sliding option (add $50, not available on mechanism #81). 30

31 elasto ase: 5-Prong ack height: Low : 26" (660 mm) : 26½" (673 mm) : 32½" (826 mm) : 16½" (419 mm) : 20" (508 mm) : 18" (457 mm) 40.0 lb (18.2 kg) 15.8 u.t. (0.45 m 3 ) abric (seat) 0.8 yd (0.73 m) abric (back) 0.8 yd (0.73 m) lex seat lex seat Mesh back Mechanism ase Mec. Option rms ooting Metal Seat. L - L ase: VN (no charge) or V (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 81. Option: S (+$50). Not available on mechanism #81. rms: N (no charge) or X (+$80). ooting: H, S or G. Metal: rm structure finish N (black) or (chrome, +$25). abric: rtopex seating fabrics. 10, 11, 20, , 51, Mechanism 10, 11, 20, 21 ase Mec. Option rms ooting Metal Seat. L - L ase: VN (no charge) or V (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 81. Option: S (+$50). Not available on mechanism #81. rms: N (no charge) or X (+$80). ooting: H, S or G. Metal: rm structure finish N (black) or (chrome, +$25). Seat fabric : rtopex seating fabrics. ack , 51, general info executive / task lounge / reception visitor / café 31

32 elasto general info ase: 5-Prong ack height: Medium Mechanism lex seat 10, 11, 20, visitor / café lounge / reception executive / task : 26" (660 mm) : 27" (686 mm) : 39½" (1003 mm) : 16½" (419 mm) : 20" (508 mm) : 18" (457 mm) 50.0 lb (22.7 kg) 19.4 u.t. (0.6 m 3 ) abric (seat) 0.8 yd (0.7 m) abric (back) 1.0 yd (0.91 m) lex seat Mesh back 41, 51, ase Mec. Option rms ooting Metal Seat. ack. L - M ase: VN (no charge) or V (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 81. Option: S (+$50). Not available on mechanism #81. rms: N (no charge) or X (+$80). ooting: H, S or G. Metal: rm structure finish N (black) or (chrome, +$25). abric: rtopex seating fabrics. Mechanism 10, 11, 20, , 51, ase Mec. Option rms ooting Metal Seat. L - M ase: VN (no charge) or V (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 81. Option: S (+$50). Not available on mechanism #81. rms: N (no charge) or X (+$80). ooting: H, S or G. Metal: rm structure finish N (black) or (chrome, +$25). Seat fabric: rtopex seating fabrics. 32

33 elasto 1 : 26" (660 mm) : 27" (686 mm) : 47" (1194 mm) 1: 39½" (1003 mm) : 16½" (419 mm) : 20" (508 mm) : 18" (457 mm) ase: 5-Prong ack height: "irector" 52.0 lb (23.6 kg) 23.3 u.t. (0.66 m 3 ) abric (seat) 0.8 yd (0.73 m) abric (back) 1.0 yd (0.91 m) lex seat lex seat Mesh back Mechanism L - - L ase: VN (no charge) or V (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 81. Option: S (+$50). Not available on mechanism #81. rms: N (no charge) or X (+$80). ooting: H, S or G. Metal: rm structure finish N (black) or (chrome, +$25). abric: rtopex seating fabrics. * Headrest is in black molded urethane. 10, 11, 20, , 51, Mechanism ase Mec. Option rms ooting Metal Seat. ack. 10, 11, 20, , 51, ase Mec. Option rms ooting Metal Seat ase: VN (no charge) or V (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 81. Option: S (+$50). Not available on mechanism #81. rms: N (no charge) or X (+$80). ooting: H, S or G. Metal: rm structure finish N (black) or (chrome, +$25). Seat fabric: rtopex seating fabrics. * Headrest is in black molded urethane. general info executive / task lounge / reception visitor / café 33

34 elasto general info ase: 5-Prong ack height: High Mechanism lex seat 10, 11, 20, , 51, visitor / café lounge / reception executive / task : 26" (660 mm) : 27" (686 mm) : 47" (1194 mm) 1: 39½" (1003 mm) : 16½" (419 mm) : 20" (508 mm) : 18" (457 mm) 52.0 lb (23.6 kg) 23.3 u.t. (0.66 m 3 ) abric (seat) 0.8 yd (0.73 m) abric (back) 1.3 yd (1.19 m) lex seat Mesh back L - H - L - H ase: VN (no charge) or V (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 81. Option: S (+$50). Not available on mechanism #81. rms: N (no charge) or X (+$80). ooting: H, S or G. Metal: rm structure finish N (black) or (chrome, +$25). abric: rtopex seating fabrics. Mechanism ase Mec. Option rms ooting Metal Seat. ack. 10, 11, 20, , 51, ase Mec. Option rms ooting Metal Seat ase: VN (no charge) or V (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 81. Option: S (+$50). Not available on mechanism #81. rms: N (no charge) or X (+$80). ooting: H, S or G. Metal: rm structure finish N (black) or (chrome, +$25). Seat fabric: rtopex seating fabrics. 34

35 elasto : 24½" (622 mm) : 26½" (673 mm) : 34½" (876 mm) : 16½" (419 mm) : 20" (508 mm) : 18" (457 mm) ase: 4-leg ack height: Low 37.5 lb (17 kg) 15.8 u.t. (0.5 m 3 ) abric (seat) 0.8 yd (0.7 m) abric (back) 0.8 yd (0.7 m) Model with casters illustrated, also available on glides, chair will be same height. lex seat ooting Metal Seat. ack. L - L X ooting: H, S or G. Metal: Legs & arm structure finish N (black) or (chrome, +$50). abric: rtopex seating fabrics. lex seat Mesh back ooting Metal L - L X abric ooting: H, S or G. Metal: Legs & arm structure finish N (black) or (chrome, +$50). Seat fabric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 35

36 general info visitor / café lounge / reception executive / task loveflex Specifications: The Lovelex series chair is available with a low, medium or high back. The wood structure in the Lovelex is comprised of molded plywood and molded foam. The lex structure has a tubular steel frame with an Ultra-lex membrane and molded foam (seat) or foam slab (back). The seat and back lex are upholstered with removable fabric slipcovers. hairs are fitted to a 5-prong base attached to a gas cylinder or screw column. It can also be assembled with a sled or 4-leg base. On the 5-prong base, the adjustable arms (W, R and G) and the fixed arms (T, G and ) have width adjustability. These chairs are individually packaged in a box. Height (back) L Low ase M Medium ZN (black nylon) TN (stool, black nylon) 01 (sled) Mechanism H High 2 Z (poli. aluminum) dd $85 04 (4-leg) (seat & back) W T (stool, poli. aluminum) dd $85 lex seat Z (poli. alu. & black) dd $85 10 Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt 71 Height adjustment (gas), seat & back angle, all-position tilt 81 Height adjustment (gas), synchro seat/back frontal 5 position tilt (Options "S" & "" not available on mechanism #81) T (stool, poli. alu. & black) dd $85 odification: Height Struct. ase Mec. Option rms ooting Metal abric L odification example: Medium back chair, wood seat & flex back structure, 4-legged base, T fixed arms, glides, legs have a black finish, OH91 fabric. This chair's list price is $ rms NO arms N JUSTL arms W dd $80 ooting ode : L-MW-04-T-G-N-OH91 Option (options "S" & "" not available on mechanism #81) R Ratchet back height adjustment option (add $25). S ront-to-back seat sliding option (available on all mechanisms, add $50). ront-to-back seat sliding and ratchet back height adjustment options (add $75). abric R dd $80 H Hard wheel casters for soft surfaces Metal (sled & 4-leg base) Info on pictograms, see p.6. IX arms T dd $80 G dd $80 S Soft wheel casters for hard surfaces G dd $80 X dd $130 G Glides dd $80 Y dd $130 If applicable, specify the sled base finish, code N: lack or : hrome (+$30). Refer to the rtopex Seating abrics sample cards. rench seams on chairs covered with vinyl or leather (fabrics VM, O & M). 36

37 loveflex : 26" (660 mm) : 24" (610 mm) : 33¼" (845 mm) : 16¼" (413 mm) : 19¾" (502 mm) : 17¼" (438 mm) ase: 5-Prong ack height: Low 42.0 lb (19.1 kg) 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) W lex seat Mechanism Struct. 10, 11, 20, , 51, , 11, 20, , 51, ase Mec. Option rms ooting abric L - L : W or ase: ZN (no charge) or Z (+$85). On the low-back chair, these bases have a 25" diameter. Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 37

38 loveflex general info ase: 5-Prong ack height: Medium Mechanism 10, 11, 20, W visitor / café lounge / reception executive / task : 26" (660 mm) : 24" (610 mm) : 39¼" (997 mm) : 16¼" (413 mm) : 19¾" (502 mm) : 17¼" (438 mm) 44.0 lb (20.0 kg) 20.1 u. t. (0.6 m 3 ) abric 1.6 yd (1.5 m) lex seat 41, 51, , 11, 20, , 51, Struct. ase Mec. Option rms ooting abric L - M : W or ase: ZN (no charge). Z or Z (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. abric: rtopex seating fabrics. 38

39 loveflex : 26" (660 mm) : 24" (610 mm) : 46¼" (1175 mm) : 16¼" (413 mm) : 19¾" (502 mm) : 17¼" (438 mm) ase: 5-Prong ack height: High 46.0 lb (20.9 kg) 23.3 u. t. (0.7 m 3 ) abric 2.1 yd (1.9 m) W lex seat Mechanism Struct. 10, 11, 20, , 51, , 11, 20, , 51, ase Mec. Option rms ooting abric L - H : W or ase: ZN (no charge). Z or Z (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 39

40 loveflex general info ase: Sled ack height: Low W visitor / café lounge / reception executive / task : 22¼" (565 mm) : 24" (610 mm) : 34" (864 mm) : 17" (432 mm) : 19¾" (502 mm) : 17¼" (438 mm) 40.0 lb (18.2 kg) 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) : 22¼" (565 mm) : 24" (610 mm) : 40" (1016 mm) : 17" (432 mm) : 19¾" (502 mm) : 17¼" (438 mm) ase : Sled ack height : Medium 42.0 lb (19.1 kg) 20.1 u.t. (0.6 m 3 ) abric 1.6 yd (1.5 m) lex seat W lex seat L - L : W or. rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. Struct. rms Metal abric Struct. rms Metal abric L - M : W or. rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. 40

41 loveflex : 22¼" (565 mm) : 24" (610 mm) : 34" (864 mm) : 17" (432 mm) : 19¾" (502 mm) : 17¼" (438 mm) ase: 4-Leg ack height: Low 37.0 lb (16.8 kg) 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) Model with casters illustrated, also available on glides, chair will be same height. : 22¼" (565 mm) : 24" (610 mm) : 40" (1016 mm) : 17" (432 mm) : 19¾" (502 mm) : 17¼" (438 mm) ase: 4-Leg ack height: Medium 42.0 lb (19.1 kg) 20.1u.t. (0.6 m 3 ) abric 1.6 yd (1.5 m) Model with casters illustrated, also available on glides, chair will be same height. W lex seat W lex seat L - L : W or. rms: N (no charge). T, G, (+$80). ooting: H, S or G. Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. Struct. rms ooting Metal Struct. rms ooting Metal abric L - M : W or. rms: N (no charge). T, G, (+$80). ooting: H, S or G. Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. abric general info executive / task lounge / reception visitor / café 41

42 loveflex general info ase: 5-Prong, Stool ack height: Low Mechanism W visitor / café lounge / reception executive / task : 26" (660 mm) : 24" (610 mm) : 43½" (1105 mm) : 26½" (673 mm) : 19¾" (502 mm) : 17¼" (438 mm) 53.0 lb (24.1 kg) 23.3 u.t. (0.7 m 3 ) abric 1.4 yd (1.3 m) lex seat SPIIY Struct. ase Mec. Option rms ooting abric L - L : W or ase: TN (no charge). T, T (+$85). Mechanism: 11, 31 or 51. *On mechanisms #31 and #51 the backward tilt function has been removed for safety reasons. Only the seat angle adjustment is possible on the #51 mechanism. Option: R (+$25). rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. abric: rtopex seating fabrics. 42

43 1 3 4 lovepop Specifications: The Lovepop series chair is available with a low or medium back. The seat structure on the Lovepop is comprised of molded plywood and molded foam. The back structure is comprised of tubular steel wrapped in woven plastic membrane and molded foam slab. hairs are fitted to a 5-prong base attached to a gas cylinder or screw column. They can also be assembled on a sled base. On the 5-prong base, the adjustable arms (W, R, G, X and Y) and the fixed arms (T, G and ) have width adjustability. The chairs are individually packaged in a box. Height (back) L Low ase M Medium ZN (black nylon) TN (black nylon, stool) 01 (sled) Mechanism 2 (seat & back) WN anvas back Z (polished aluminum) dd $85 T (poli. alu., stool) dd $85 10 Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt 71 Height adjustment (gas), seat & back angle, all-position tilt odification: LP odification example: Option rms NO arms N JUSTL arms W dd $80 ooting Height Struct. ode : LP-LWN-TN11R-R-S-Q82 R dd $80 ase Mec. Option rms ooting Metal abric Low back chair, WN structure, black stool base, mechanism 11 with "R" option, R adjustable arms, soft wheel casters and Q82 fabric. This chair's list price is $624. R Ratchet back height adjustment option (add $25). S ront-to-back seat sliding option (available on all mechanisms, add $50). ront-to-back seat sliding and ratchet back height adjustment options (add $75). H Hard wheel casters for soft surfaces Metal (sled base) abric Info on pictograms, see p.6. IX arms T dd $80 G dd $80 S Soft wheel casters for hard surfaces G dd $80 X dd $130 G Glides dd $80 Y dd $130 If applicable, specify the sled base finish, code N: lack or : hrome (+$30). Refer to the rtopex Seating abrics sample cards. Grades 0 to 5 only, leathers not available. 43 general info executive / task lounge / reception visitor / café

44 lovepop general info ase: 5-Prong ack height: Low Mechanism Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 10, 11, 20, WN visitor / café lounge / reception executive / task : 26" (660 mm) : 24¼" (616 mm) : 33½" (851 mm) : 16½" (419 mm) : 19½" (495 mm) : 17" (432 mm) 31.0 lb (14.4 kg) 15.8 u.t. (0.5 m 3 ) abric 1.2 yd (1.1 m) ase: 5-Prong ack height: Medium : 26" (660 mm) : 24¼" (616 mm) : 37½" (953 mm) : 16½" (419 mm) : 19½" (495 mm) : 17" (432 mm) 32.0 lb (14.5 kg) 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) anvas back WN anevas back LP - LWN ase: ZN (no charge) or Z (+$85). On the low-back chair, these bases have a 25" diameter. Mechanism: 10, 11, 20, 21, 31, 41, 51 or 71. Option: R (+$25), S (+$50) or (+$75). rms: N (no charge). W, R, T, G, (+$80). X, Y (+$130) ooting: H, S or G. abric: rtopex seating fabrics, grades 0 to 5 only, leather not available. Mechanism 41, ase Mec. Option rms ooting abric Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 10, 11, 20, , ase Mec. Option rms ooting abric LP - MWN ase: ZN (no charge) or Z (+$85). Mechanism: 10, 11, 20, 21, 31, 41, 51 or 71. Option: R (+$25), S (+$50) or (+$75). rms: N (no charge). W, R, T, G, (+$80). X, Y (+$130) ooting: H, S or G. abric: rtopex seating fabrics, grades 0 to 5 only, leather not available. 44

45 lovepop : 22¼" (565 mm) : 24¼" (616 mm) : 33½" (851 mm) : 16½" (419 mm) : 19½" (495 mm) : 17" (432 mm) ase: Sled ack height: Low 29.0 lb (13.2 kg) 15.8 u.t. (0.5 m 3 ) abric 1.2 yd (1.1 m) : 22¼" (565 mm) : 24¼" (616 mm) : 37½" (953 mm) : 16½" (419 mm) : 19½" (495 mm) : 17" (432 mm) WN ase: Sled ack height: Medium 35.0 lb (15.9 kg) 15.8 u.t. (0.5 m 3 ) abric 1.4 yd (1.3 m) anvas back WN anvas back Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr LP - LWN rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics, grades 0 to 5 only, leather not available. rms Metal abric Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr rms Metal abric LP - MWN rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). abric: rtopex seating fabrics, grades 0 to 5 only, leather not available. general info executive / task lounge / reception visitor / café 45

46 lovepop general info ase: 5-Prong, Stool ack height: Low Mechanism Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 WN visitor / café lounge / reception executive / task : 26" (660 mm) : 24¼" (616 mm) : 43½" (1105 mm) : 26" (660 mm) : 19½" (495 mm) : 17" (432 mm) 41.0 lb (18.6 kg) 23.3 u.t. (0.7 m 3 ) abric 1.2 yd (1.1 m) anvas back ase Mec. Option rms ooting abric LP - LWN ase: TN (no charge) or T (+$85). Mechanism: 11, 31 or 51. *On mechanisms #31 and #51 the backward tilt function has been removed for safety reasons. Only the seat angle adjustment is possible on the #51 mechanism. Option: R (+$25). rms: N (no charge). W, R, T, G, (+$80). X, Y (+$130). ooting: H, S or G. abric: rtopex seating fabrics, grades 0 to 5 only, leather not available. 46

47 1 4 5 sentinel Specifications: The Sentinel series chair is available with a medium or high back and a choice of 2 seat/back widths : Standard or large (+2"). The back is comprised of a tubular steel frame with a PV membrane and the front is covered in polyurethane foam slab and a moisturewicking fiber layer. The seat is comprised of molded plywood, molded polyurethane foam and a moisture-wicking fiber. The seat is fitted with an adjustable mechanism connected to a 5-prong base by a gas cylinder or screw column, it is also available with a sled base (offered on the medium back & standard width only). These chairs are individually packaged in a box. hair width 2 Standard 2 Height (back) 3 M Medium ase H High ZN (black nylon) VN (black nylon) 01 (sled, black) Mechanism 3 Large (+2", +$50) WN anvas back Z (polished aluminum) dd $85 V (polished aluminum) dd $85 Z (pol. alu. & black) dd $85 W (wood) dd $ Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt odification: Width S odification example: Standard width, medium back, WN structure, sled base, G fixed arms, M60 fabric (leather). ode : S2-MWN-01-G-N-M60 This chair's list price is $ Height Struct. ase Mec. Option rms ooting Wood abric Option S ront-to-back seat sliding option (available on all mechanisms, add $50). rms NO arms N ooting H Hard wheel casters for soft surfaces Wood (if applicable) abric Info on pictograms, see p.6. IX arms G dd $80 JUSTLS arms S dd $80 S Soft wheel casters for hard surfaces dd $80 dd $80 Refer to the rtopex Seating abrics sample cards. G Glides S dd $80 Z dd $130 If applicable, specify the wood finish for the base. Refer to the rtopex Wood sample card. general info executive / task lounge / reception visitor / café 47

48 sentinel general info ase: 5-Prong ack height: Medium Mechanism Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 omb. Leather Leather 10, 11, 20, visitor / café lounge / reception executive / task : 25½" (648 mm) : 24½" (622 mm) : 37" (940 mm) : 17¼ " (438 mm) : 19¾" (502 mm) : 18½" (470 mm) 46.5 lb (2.1 kg) 15.6 u.t. (0.4 m 3 ) abric 2.3 yd (2.41 m) : 25½" (648 mm) : 26½" (673 mm) : 43½" (1105 mm) : 17¼ " (438 mm) : 19¾" (502 mm) : 18½" (450 mm) WN ase: 5-Prong ack height: High 50.0 lb (22.7 kg) 18.6 u.t. (0.5 m 3 ) abric 2.7 yd (2.47 m) anvas back W anvas back , Width ase S - MWN S - HWN Width: 2 (standard) or 3 (large, +$50). ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41 or 51. Option: S (Seat slider, +$50). rms: N (no charge). S,, G,, S (+$80). Z ($130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. ombined leather codes: lack: V02 urgundy: V46 Tan: V60 lue: V17 amel: V41 Green: V42 Mec. Option rms Wood abric Width: 2 (standard) or 3 (large, +$50). ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41 or 51. Option: S (Seat slider, +$50). rms: N (no charge). S,, G,, S (+$80). Z ($130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. ombined leather codes: lack: V02 urgundy: V46 Tan: V60 lue: V17 amel: V41 Green: V42 Mechanism ooting Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 omb. Leather Leather 10, 11, 20, , Width ase Mec. Option rms ooting Wood abric 48

49 sentinel : 24¾" (629 mm) : 24½" (622 mm) : 38¾" (984 mm) : 18" (457 mm) : 19¾" (502 mm) : 18" (457 mm) ase: Sled ack height: Medium 41.2 lb (18.7 kg) 18.6 u.t. (0.5 m 3 ) abric 2.3 yd (2.1 m) WN anvas back Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 rms S2 - MWN N - rms: N (no charge). G,, S (+$80). abric: rtopex seating fabrics. ombined leather codes: lack: V02 urgundy: V46 Tan: V60 lue: V17 amel: V41 Green: V42 abric omb. Leather Leather general info executive / task lounge / reception visitor / café 49

50 general info visitor / café lounge / reception executive / task 3 4 soft Specifications: The Soft series chair is available with a medium or high back. The back is made of a tubular steel frame wrapped with a polyester fabric (Mesh). The seat is comprised of molded plywood, molded polyurethane foam and a moisture-wicking fiber. The seat is fitted with an adjustable mechanism connected to a 5- prong base by a gas cylinder or screw column, it is also available with a sled base (offered in the medium back only). These chairs are individually packaged in a box. Height (back) M Medium ase H High ZN (black nylon) VN (black nylon) 01 (sled, black) Mechanism 10 Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt Option W Mesh back Z (polished aluminum) dd $85 V (polished aluminum) dd $85 Z (pol. alu. & black) dd $85 W (wood) dd $200 S ront-to-back seat sliding option (available on all mechanisms, add $50). odification: S odification example: Medium back, W structure, sled base, G fixed arms, M60 fabric (leather). This chair's list price is $ Height Struct. ase Mec. Option rms ooting Wood abric rms NO arms N ooting H Hard wheel casters for soft surfaces Wood (if applicable) abric ode : S-MW-01-G-M60 abric Seat & headrest Info on pictograms, see p.6. IX arms G dd $80 JUSTLS arms S dd $80 S Soft wheel casters for hard surfaces dd $80 dd $80 G Glides S dd $80 Z dd $130 If applicable, specify the wood finish for the base. Refer to the rtopex Wood sample card. the fabric for the seat and headrest, mesh fabric is black. Refer to the rtopex Seating abrics sample cards. Mesh (black) ack 50

51 soft : 25½" (648 mm) : 24½" (622 mm) : 37" (940 mm) : 17¼ " (438 mm) : 19¾" (502 mm) : 18½" (470 mm) ase: 5-Prong ack height: Medium 46.5 lb (2.1 kg) 15.6 u.t. (0.4 m 3 ) abric 0.75 yd (0.69 m) : 25½" (648 mm) : 26½" (673 mm) : 43½" (1105 mm) : 17¼ " (438 mm) : 19¾" (502 mm) : 18½" (450 mm) ase: 5-Prong ack height: High 48.0 lb (21.8 kg) 18.6 u.t. (0.5 m 3 ) abric 1.5 yd (1.05 m) W Mesh back W Mesh back Mechanism S - MW ase Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 Leaher 10, 11, 20, , Mec. Option rms ooting Wood ase Mec. Option rms ooting Wood S - HW abric ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41 or 51. Option: S (Seat slider, +$50). rms: N (no charge). S,, G,, S (+$80). Z (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. Mechanism 10, 11, 20, , abric ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41 or 51. Option: S (Seat slider, +$50). rms: N (no charge). S,, G,, S (+$80). Z (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 51

52 soft general info ase: Sled ack height: Medium W Mesh back visitor / café lounge / reception executive / task : 24¾" (629 mm) : 24½" (622 mm) : 38¾" (984 mm) : 18" (457 mm) : 19¾" (502 mm) : 18" (457 mm) 41.2 lb (18.7 kg) 18.6 u.t. (0.53 m 3 ) abric 0.75 yd (0.69 m) rms S - MW N - rms: N (no charge). G,, S (+$80). abric: rtopex seating fabrics. abric 52

53 3 vista 1 Height (back) 2 4 Specifications: The Vista series chair is available with a medium or high back. The back is comprised of a tubular steel frame with a PV membrane and the front is covered in polyurethane foam slab. The seat is comprised of molded plywood, molded polyurethane foam. ack and seat also have a moisture wicking-fiber layer. The seat is attached to a mechanism connected to a 5-prong base by a gas cylinder or a screw column, it is also available with a sled base (offered in the medium back only). These chairs are individually packaged in a box. M Medium ase H High ZN (black nylon) VN (black nylon) 01 (sled, black) Mechanism WN anvas back Z (polished aluminum) dd $85 V (polished aluminum) dd $85 Z (pol. alu. & black) joutez 85$ W (wood) dd $ Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt odification: Height Struct. ase Mec. Option rms ooting Wood abric VT odification example: High back chair, WN structure, W base (wood), mechanism 51 with "S" option, S adjustable arms, soft wheel casters, ark herry wood base finish & M76 fabric (leather). This chair's list price is $ rms NO arms N abric ode : VT-HWN-W51S-S-S-W84-M76 ooting H Hard wheel casters for soft surfaces Wood (if applicable) Info on pictograms, see p.6. IX arms G dd $80 JUSTL arms S dd $80 dd $80 dd $80 S Soft wheel casters for hard surfaces Refer to the rtopex Seating abrics sample cards. G Glides S dd $80 Z dd $130 If applicable, specify the wood finish for the base. Refer to the rtopex Wood sample card. general info executive / task lounge / reception visitor / café 5 Option S ront-to-back seat sliding option (available on all mechanisms, add $50). 53

54 general info vista ase: 5-Prong ack height: Medium Mechanism Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 omb. Leather Leather visitor / café lounge / reception executive / task : 25½" (648 mm) : 24½" (622 mm) : 37" (940 mm) : 18½" (470 mm) : 19¾" (502 mm) : 17½" (445 mm) 49 lb (22.3 kg) 15.6 u.t. (0.4 m 3 ) abric 2.3 yd (2.1 m) : 25½" (648 mm) : 26½" (673 mm) : 43¾" (1111 mm) : 18½" (470 mm) : 19¾" (502 mm) : 17½" (445 mm) WN ase: 5-Prong ack height: High 50.5 lb (23.0 kg) 18.6 u.t. (0.5 m 3 ) abric 2.8 yd (2.5 m) anvas back WN anvas back 10, 11, 20, ase Mec. Option rms ooting Wood VT - MWN , ase Mec. Option rms ooting Wood VT - HWN abric ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41 or 51. Option: S (Seat slider, +$50). rms: N (no charge). S,, G,, S (+$80). Z (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. ombined leather codes: lack: V02 urgundy: V46 Tan: V60 lue: V17 amel: V41 Green: V42 abric ase: ZN, VN (no charge). Z, Z, V (+$85). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41 or 51. Option: S (Seat slider, +$50). rms: N (no charge). S,, G,, S (+$80). Z (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. abric: rtopex seating fabrics. ombined leather codes: lack: V02 urgundy: V46 Tan: V60 lue: V17 amel: V41 Green: V42 Mechanism Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 omb. Leather Leather 10, 11, 20, ,

55 vista : 24¾" (629 mm) : 24½" (622 mm) : 38¾" (984 mm) : 18" (457 mm) : 19¾" (502 mm) : 18" (457 mm) ase: Sled ack height: Medium 43.7 lb (19.9 kg) 18.6 u.t. (0.5 m 3 ) abric 2.3 yd (2.1 m) WN anvas back Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr.5 rms VT - MWN N - rms: N (no charge). G,, S (+$80). abric: rtopex seating fabric. ombined leather codes: lack: V02 urgundy: V46 Tan: V60 lue: V17 amel: V41 Green: V42 abric omb. Leather Leather general info executive / task lounge / reception visitor / café 55

56 general info visitor / café lounge / reception executive / task wingo Specifications: The Wingo chair is offered in three sizes (small, standard and large) and a low, medium or high back. The Wingo lex seat features a tubular steel frame webbed with Ultra- lex membrane and molded foam. The wood seat is molded plywood with molded foam slab. The back is also tubular steel webbed with Ultra-lex membrane upholstered with molded foam. The lex seat and back are upholstered in removable fabric slipcovers. The seat is attached to a mechanism connected to a-5 prong base by a gas cylinder or a screw column. sled or 4-leg base is also available. On the 5-prong base, the adjustable arms (W, R, G, X and Y) and the fixed arms (T, G and ) have width adjustability. These chairs are individually packaged in a box. Width (chair) valiable on 5-prong chairs 1 2 Narrow (-2") Standard (back & seat) ase W ZN (black nylon) VN (black nylon) TN (stool, black nylon) 3 Large (+2", +$100) 2 Height (back) L Low lex seat Z (polished aluminum) dd $85 V (polished aluminum) dd $85 T (stool, polished alu.) dd $85 M Medium H High Z (pol. alu. & black) dd $85 W (wood) dd $200 T (stool, pol. alu. & black) dd $ Mechanism 10 Height adjustment (screw) 11 Height adjustment (gas) 20 Height adjustment (screw), single position tilt 21 Height adjustment (gas), single position tilt 31 Height adjustment (gas), back angle, single position tilt 41 Height adjustment (gas), synchro seat/back centered 5 position tilt 51 Height adjustment (gas), back angle, all-position tilt 71 Height adjustment (gas), seat & back angle, all-position tilt 81 Height adjustment (gas), synchro seat/back frontal 5 position tilt (Options "S" & "" not available on mechanism #81) Option (Options "S" & "" not available on mechanism #81) R Ratchet back height adjustment option (add $25). S ront-to-back seat sliding option (available on all mechanisms, add $50). ront-to-back seat sliding and ratchet back height adjustment options (add $75). rms NO arms N JUSTL arms W dd $80 ooting H Hard wheel casters for soft surfaces R dd $80 Info on pictograms, see p.6. IX arms T dd $80 G dd $80 G dd $80 S Soft wheel casters for hard surfaces abrics : Main abric & accents X dd $130 Wood (if applicable) or Metal (sled & 4-leg bases) dd $80 G Glides Y dd $130 If applicable, specify the wood base finish (refer to the rtopex Wood sample card) or specify the sled & 4-leg base finish, code N: lack or : hrome (+$30). the main fabric (seat & back) as well as the ccent fabric (lumbar details). or pricing, Main fabric's grade applies. Refer to the rtopex Seating abrics sample cards. Main fabric Seat & back ccents Lumbar details (Grades 0 to 5 only*) 01 (sled) 04 (4-leg) *ccents can be specified in leather only if the Main fabric is leather. 56 rench seams on chairs covered with vinyl or leather (fabrics VM, O & M).

57 wingo * : 26" (660 mm) : 24" (610 mm) : 31¾" (806 mm) : 16¼" (413 mm) : 18½" (470 mm) : 18" (457 mm) ase: 5-Prong ack height: Low * 40.0 lb (18.2 kg) 15.8 u.t. (0.5 m 3 ) abric* 1.8 yd (1.6 m) * hair width : Standard W lex seat odification: Width Height Struct. ase Mec. Option rms ooting Wood Main. ccent Wi odification example: Standard width, medium back, structure, Z base, mechanism 41 with "" option, R adjustable arms, soft wheel casters, main fabric is MX91 and ccent fabric is OH17. ode : Wi2-M-Z41-R-S-MX91-OH17 This chair's list price is $1023. Mechanism 10, 11, 20, , 51, , 11, 20, , 51, Width Struct. ase Mec. Option rms ooting Main. ccent Wi - L Width: 1 (narrow), 2 (standard) or 3 (large, +$100). : W or. ase: ZN (no charge) or Z (+$85). On the low-back chair, these bases have a 25" diameter. Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. Main fabric: rtopex seating fabrics. ccent: rtopex seating fabrics, leather not available. general info executive / task lounge / reception visitor / café 57

58 wingo general info ase: 5-Prong ack height: Medium Mechanism visitor / café lounge / reception executive / task * : 26" (660 mm) : 24" (610 mm) : 39¼" (997 mm) : 16¼" (413 mm) : 19½" (495 mm) : 17¼" (438 mm) * 44.0 lb (20.0 kg) 20.1 u.t. (0.6 m 3 ) abric* 1.9 yd (1.7 m) * hair width : Standard W lex seat 10, 11, 20, , 51, , 11, 20, , 51, Width Struct. ase Mec. Option rms ooting Wood Main. ccent Wi - M Width: 1 (narrow), 2 (standard) or 3 (large, +$100). : W or. ase: ZN, VN (no charge). Z, Z, V (+85$). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex wood sample card. Main fabric: rtopex seating fabrics. ccent: rtopex seating fabrics, leather not available. 58

59 wingo * : 26" (660 mm) : 24" (610 mm) : 46¼" (1175 mm) : 16¼" (413 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: 5-Prong ack height: High * 46.0 lb (20.9 kg) 23.3 u.t. (0.7 m 3 ) abric* 2.2 yd (2.0 m) * hair width : Standard W lex seat Mechanism 10, 11, 20, , 51, , 11, 20, , 51, Width Struct. ase Mec. Option rms ooting Wood Main. ccent Wi - H Width: 1 (narrow), 2 (standard) or 3 (large, +$100). : W or. ase: ZN, VN (no charge). Z, Z, V (+85$). W (+$200). Mechanism: 10, 11, 20, 21, 31, 41, 51, 71 or 81. Option: R (+$25), S (+$50) or (+$75). Options "S" & "" not available on mechanism #81. rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. Wood: If the "W" base is chosen, specify the wood finish, refer to the rtopex Wood sample card. Main fabric: rtopex seating fabrics. ccent: rtopex seating fabrics, leather not available. general info executive / task lounge / reception visitor / café 59

60 wingo general info ase: Sled ack height: Low W visitor / café lounge / reception executive / task : 22¼" (565 mm) : 24" (610 mm) : 34" (864 mm) : 17" (432 mm) : 19½" (495 mm) : 17¼" (438 mm) 40.0 lb (18.2 kg) 15.8 u.t. (0.5 m 3 ) abric 1.8 yd (1.6 m) : 22¼" (565 mm) : 24" (610 mm) : 40" (1016 mm) : 17" (432 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: Sled ack height: Medium 42.0 lb (19.1 kg) 20.1 u.t. (0.6 m 3 ) abric 1.9 yd (1.8 m) lex seat W lex seat Wi2 - L Struct. rms Metal Main. : W or. rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). Main fabric: rtopex seating fabrics. ccent: rtopex seating fabrics, leather not available. Struct. rms Metal Main. Wi2 - M : W or. rms: N (no charge). T, G, (+$80). Metal: ase finish N (black) or (chrome, +$30). Main fabric: rtopex seating fabrics. ccent: rtopex seating fabrics, leather not available. ccent ccent 60

61 wingo : 22¼" (565 mm) : 24" (610 mm) : 34" (864 mm) : 17" (432 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: 4-Leg ack height: Low 37.0 lb (16.8 kg) 15.8 u.t. (0.5 m 3 ) abric 1.8 yd (1.6 m) Model with casters illustrated, also available on glides, chair will be same height. : 22¼" (565 mm) : 24" (610 mm) : 40" (1016 mm) : 17" (432 mm) : 19½" (495 mm) : 17¼" (438 mm) ase: 4-Leg ack height: Medium 42.0 lb (19.1 kg) 20.1 u.t. (0.6 m 3 ) abric 1.9 yd (1.7 m) W lex seat W lex seat Struct. rms ooting Metal Main. ccent Wi2 - L : W or. rms: N (no charge). T, G, (+$80). ooting: H, S or G. Metal: ase finish N (black) or (chrome, +$30). Main fabric: rtopex seating fabrics. ccent: rtopex seating fabrics, leather not available Struct. rms ooting Metal Main. Wi2 - M : W or. rms: N (no charge). T, G, (+$80). ooting: H, S or G. Metal: ase finish N (black) or (chrome, +$30). Main fabric: rtopex seating fabrics. ccent: rtopex seating fabrics, leather not available. ccent general info executive / task lounge / reception visitor / café Model with casters illustrated, also available on glides, chair will be same height. 61

62 wingo general info ase: 5-Prong, Stool ack height: Low Mechanism W visitor / café lounge / reception executive / task : 26" (660 mm) : 24" (610 mm) : 43½" (1105 mm) : 26½" (673 mm) : 19½" (502 mm) : 17¼" (438 mm) 53.0 lb (24.1 kg) 23.3 u.t. (0.7 m 3 ) abric 1.8 yd (1.6 m) lex seat Width Struct. ase Mec. Option rms ooting abric ccent Wi - L Width: 1 (narrow - recommended), 2 (standard). : W or. ase: TN (no charge). T, T (+$85). Mechanism: 11, 31 or 51. *On mechanisms #31 and #51 the backward tilt function has been removed for safety reasons. Only the seat angle adjustment is possible on the #51 mechanism. Option: R (add $25). rms: N (no charge). W, R, G, T, G, (+$80). X, Y (+$130). ooting: H, S or G. Main fabric: rtopex seating fabrics. ccent: rtopex seating fabrics, leather not available. 62

63 1 2 aramis Specifications: The ramis armchairs are lounge style 1 seaters. They can be completely upholstered or with the back and arms in mesh polyester with an upholstered seat. vailable with levelling glides, chrome metal legs or casters. The back and arms are made of a tubular steel frame with a wrapped nylon reinforced membrane covered in polyurethane foam and moisture-wicking fiber layer. In the polyester net version, the arms and back are made of a tubular steel frame with polyester net (Mesh). The seat is plywood base with a membrane wrapped in Ultra-lex and upholstered with high density polyurethane foam. These armchairs are individually packaged. UU Upholstered seat Upholstered back ooting G Glides H asters hrome U Upholstered seat "Mesh" back asters can be specified on 1-place chairs only. This chair's structure is different when ordered with the hrome footing (), see illustration. 3 4 odification: R1 - Struct. odification example: This chair's list price is $ ooting 2 - ode : R1-UU-G-MX21-M02 When ordered with the UU structure (upholstered seat & backrest), it is possible to specify different fabrics for both seat and backrest. The "Side" fabric will be applied on the backrest and sides and the "Seat" fabric will be applied on the seat. Side abric Sides & backrest Side. abric : Side abric & Seat abric Pricing will be determined by the "Side" fabric unless leather is specified as "Side" fabric OR "Seat" fabric : The "Side" fabric is a regular grade (0 to 5) and the "Seat" fabric is leather, in this case $175 for the chair. The "Side" fabric is leather and the "Seat" fabric is regular grade (0 to 5), in this case SUSTRT $175. abric Seat Info on pictograms, see p Seat. UU structure, glides, "Side" fabric is MX21 (Gr.1) & seat fabric is M02 (leather). 4 Seat abric If the chair is specified with the U structure (Mesh), you need only to specify the seat's fabric. The Mesh fabric is always black. general info executive / task lounge / reception visitor / café 63

64 aramis general info rmchair (1 place) abric-covered ooting G (glides) H (casters) visitor / café lounge / reception executive / task : 26½" (673 mm) : 26¼" (667 mm) : 32½" (826 mm) - Glides : 32½" (826 mm) - asters : 32½" (826 mm) - hrome feet : 18" (457 mm) - Glides : 18" (457 mm) - asters : 18" (457 mm) - hrome feet : 21¾" (552 mm) : 19½" (495 mm) 31.4 lbs (14.2 kg) 15.6 u.t. (0.4 m 3 ) abric 3.3 v (3.02 m) - Glides or casters 3.1 yd (2.83 m) - hrome feet rmchair (1 place) "Mesh"-covered : 26½" (673 mm) : 26¼" (667 mm) : 32½" (826 mm) - Glides : 32½" (826 mm) - hrome feet : 32½" (826 mm) - asters : 18" (457 mm) - Glides : 18" (457 mm) - hrome feet : 18" (457 mm) - asters 31.4 lbs (14.2 kg) 15.6 u.t. (0.4 m 3 ) abric (seat) 0.9 v (0.82 m) - Glides or casters 1.1 v (1.0 m) - hrome feet (chrome feet) R1 - R1 - ooting UU ooting U - - Side. Seat. ooting: G (glides), H (casters) or (chrome). Side fabric (back & sides): rtopex seating fabrics. Seat fabric: rtopex seating fabrics. *Leather, see p.63. ooting G (glides) H (casters) (chrome feet) Seat. ooting: G (glides), H (casters) or (chrome). abric (seat): rtopex seating fabrics. 64

65 athos Specifications: The thos armchairs, love seats and sofas are lounge style. They are offered with either wood, chrome or aluminum finish. The back and the seat are made of plywood belted in an Ultra-lex membrane and upholstered in high-density molded polyurethane foam. The arms are made of a combined structure of plywood belted with reinforced nylon netting and covered in molded polyurethane foam. These armchairs, love seats and sofas are individually packaged. 1 Width place G rms ooting places 3 places W Wood rmchair (1 place) : 31¼" (794 mm) : 30" (762 mm) : 33½" (851 mm) : 18" (457 mm) : 27¼" (692 mm) : 22" (559 mm) G: 19¼" (489 mm) 61.6 lb (27.9 kg) 25.5 u.t. (0.7 m 3 ) odification: Width rms ooting Wood abric T hrome odification example: This chair's list price is $1532. ooting Wood abric T ode : T1--W-W80-O12 Wood (specify only if the footing "W" is chosen) Refer to the rtopex Wood sample card. abric Info on pictograms, see p.6. 1-Place armchair, arms, Light herry wood footing, O12 fabric. luminium Refer to the rtopex Seating abrics sample cards ooting: W (wood), (chrome) or (aluminum). Wood: If the "W" footing is chosen, specify the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café abric 4.6 v (4.21 m) 65

66 athos general info Love Seat (2 places) G visitor / café lounge / reception executive / task : 52¾" (1340 mm) : 30" (762 mm) : 33½" (851 mm) : 18" (457 mm) : 27¼" (692 mm) : 44" (1118 mm) G: 19¼" (489 mm) 88.7 lb (40.3 kg) 41.5 u.t. (1.2 m 3 ) abric 7.2 yd (6.58 m) Sofa (3 places) : 76½" (1943 mm) : 30" (762 mm) : 33½" (851 mm) : 18" (457 mm) : 27¼" (692 mm) : 66" (1676 mm) G: 19¼" (489 mm) lb (54.9 kg) 57.5 pi 3 (1.6 m 3 ) abric 10.0 yd (9.14 m) G ooting Wood abric T ooting: W (wood), (chrome) or (aluminum). Wood: If the "W" footing is chosen, specify the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics ooting Wood abric T ooting: W (wood), (chrome) or (aluminum). Wood: If the "W" footing is chosen, specify the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics. 66

67 1 2 cyrano Specifications: The yrano Series chairs, love seats, sofas, benches and ottomans are lounge style seating. The components of this series are modular. They can be placed to form various arrangements. They can be order with or without backrest, and with or without arms. The different components are attached with a ganging brackets under the seating. The backrest and the seat are composed of plywood surrounded by an Ultra- lex membrane covered in a high density polyurethane foam and a moisturewicking fiber layer. The arms are made of a plywood structure surrounded by a reinforced nylon membrane covered in a polyurethane foam. yrano is available with metal eco footings from the rtopex ir Line Series or with casters. These products are individually packaged in a box. Width 1 1 place ack U (with back) 2 2 places N (no back) 3 3 places Writing tablet 3 L (arm at left) R (arm at right) N (no arms) rms : 9" (229 mm) : 15" (381 mm) : 27½" (699 mm) abric 2 abrics ootings eco 10 lb (4.5 kg) 0.75 u.t. (0.02 m 3 ) odification: Y Y SPIIY Width ack rms Width odification example: vailable for left or right side. an be installed on all yrano models, with or without arms. TL or HPL surface finish, tubular support has a 3090 silver finish ode : Y1-U--H-OH35-OH93 H asters (1 place only) Info on pictograms, see p.6. YW - TL - L - - YW - TR - L - YW - TL - S - ooting Laminate abric ack rms ooting Laminate abric 1 abric 2 hair (1 place), with back, arms, casters, fabric 1: OH35, fabric 2: OH93. This chair's list price is $1362. Laminate (if applicable - surface of tables and writing tablet) See p.2 or to the rtopex "Nature" sample finish card. abric 1 and 2 (if applicable) It is possible to order a second fabric color on yrano. The side illustration indicates the positioning of the different fabrics. When ordering 2 colors, the highest grade applies to the entire chair. See current rtopex chair fabric charts and samples. Left side Right side Left side Right side YW - TR - S abric 1 T..L. finish H.P.L. finish 6 abric 2 $270 $270 $300 $300 Specifiy Inish: See p.2 or to the rtopex "Nature" sample finish card. 7 general info executive / task lounge / reception visitor / café 67

68 cyrano general info rmchair (1 place) H G rms R or L visitor / café lounge / reception executive / task : 30" (762 mm) : 27" (686 mm) : 34" (864 mm) : 18" (457 mm) : 25" (635 mm) : 22" (559 mm) G: 19¼" (489 mm) H: 26" (660 mm) 70 lb (31.8 kg) 25.5 u.t (0.72 m 3 ) abric 1.4 yd (1.3 m) - ack 2.3 yd (2.1 m) - Seat + 1 arm 3 yd (2.7 m) - Seat + 2 arms G G Love Seat (2 places) and Sofa (3 places) : 52" (1321 mm) - 2 places : 74" (1880 mm) - 3 places : 27" (686 mm) : 34" (864 mm) : 18" (457 mm) : 25" (635 mm) : 44" (1118 mm) - 2 places : 66" (1676 mm) - 3 places G: 19¼" (489 mm) 1 abric: 2 abrics: 85 lb (38.6 kg) 41.5 u.t. (1.2 m 3 ) - 2 places 110 lb (50 kg) 57.5 u.t. (1.6 m 3 ) - 3 places abric - 2 places 1.9 yd (1.7 m) - ack 3.8 yd (3.5 m) - Seat + 2 arms abric - 3 places 2.8 yd (2.6 m) - ack 4.4 yd (4 m) - Seat + 2 arms rms ooting abric Y1 - U Y1 - U arms R arm L arm rms ooting abric 1 abric 2 rms: (2 arms), R (arm to the right of the user) or L (arm to the left of the user). ooting: (eco) or H (casters). abric: rtopex seating fabrics. abric 1 & 2: rtopex seating fabrics, see illustration on p.67. * The highest grade applies to the entire chair. 2 Places Places abric: 2 abrics: SPIIY Width abric Y - U Width abric 1 abric 2 Y - U Width: width, 2 (2 places) or 3 (3 places). abric: rtopex seating fabrics. abric 1 & 2: rtopex seating fabrics, see illustration on p.67. * The highest grade applies to the entire chair. The Love Seat and Sofa are available with (eco) footings only. 68

69 cyrano hair (1 place) : 22" (559 mm) : 27" (686 mm) : 34" (864 mm) : 18" (457 mm) : 19¼" (489 mm) 50 lb (22.7 kg) 25.5 u.t. (0.72 m 3 ) Y1 - U - N - - ooting abric 1 abric 2 Y1 - U - N Love Seat (2 places) and Sofa (3 places) without arms : 44" (1118 mm) - 2 places : 66" (1676 mm) - 3 places : 27" (686 mm) : 34" (864 mm) : 18" (457 mm) : 19¼" (489 mm) Junction bracket abric 1.4 yd (1.3 m) - ack 1.6 yd (1.5 m) - Seat 65 lb (29.5 kg) 41.5 u.t. (1.2 m 3 ) - 2 places 90 lb (40.9 kg) 57.5 u.t. (1.6 m 3 ) - 3 places abric - 2 places 1.9 yd (1.7 m) - ack 2.5 yd (2.3 m) - Seat Junction bracket Metal bracket used to join 2 yrano modules together. ode : Y-JP-N Price : $25 1 abric: 2 abrics: 2 Places Places abric: 2 abrics: abric ooting: (eco) or H (casters). abric: rtopex seating fabrics. abric 1 & 2: rtopex seating fabrics, see illustration on p.67. * The highest grade applies to the entire chair. abric - 3 places 2.8 yd (2.6 m) - ack 3.1 yd (2.8 m) - Seat ooting Width abric Y - U - N - - Width abric 1 abric 2 Y - U - N Width: width, 2 (2 places) or 3 (3 places). abric: rtopex seating fabrics. abric 1 & 2: rtopex seating fabrics, see illustration on p.67. * The highest grade applies to the entire chair. *The Love Seat and Sofa are available with (eco) footings only. general info executive / task lounge / reception visitor / café 69

70 cyrano general info ench with arm(s) (1 place) rms R or L visitor / café lounge / reception executive / task : 30" (762 mm) : 24½" (622 mm) : 25" (635 mm) : 18" (457 mm) : 22" (559 mm) : 26" (660 mm) 55 lb (25 kg) 25.5 u.t. (0.72 m 3 ) abric 2.3 yd (2.1 m) - Seat + 1 arm 3 yd (2.7 m) - Seat + 2 arms ench with arms (2 places and 3 places) : 52" (1321 mm) - 2 places : 74" (1880 mm) - 3 places : 24½" (622 mm) : 25" (635 mm) : 18" (457 mm) : 44" (1118 mm) - 2 places : 66" (1676 mm) - 3 places 70 lb (31.8 kg) 41.5 u.t. (1.2 m 3 ) - 2 places 90 lb (40.9 kg) 57.5 u.t. (1.6 m 3 ) - 3 places abric - 2 places 3.8 yd (3.5 m) - Seat + 2 arms abric - 3 places 4.4 yd (4 m) - Seat + 2 arms rms ooting abric Y1 - N arms R arm L arm rms: (2 arms), R (arm to the right of the user) or L (arm to the left of the user). ooting: (eco) or H (casters). abric: rtopex seating fabrics. 2 Places Places Width abric Y - N Width: width, 2 (2 places) or 3 (3 places). abric: rtopex seating fabrics. *The 2 and 3 place benches are available with (eco) footings only. 70

71 cyrano Ottomans (1 place, 2 places and 3 places) : 22" (559 mm) - 1 place : 44" (1118 mm) - 2 places : 66" (1676 mm) - 3 places : 24½" (622 mm) : 18" (457 mm) 21" 21" S " T ½" 22" 18" 45 lb (20.5 kg) 6.9 u.t. (0.2 m 3 ) - 1 place 60 lb (27.3 kg) 13.3 u.t. (0.4 m 3 ) - 2 places 75 lb (34.1 kg) 19.7 u.t. (0.6 m 3 ) - 3 places abric 1.8 yd (1.7 m) - 1 place 2.6 yd (2.4 m) - 2 places 3.3 yd (3.02 m) - 3 places 36" S " T " " 1 Place 2 Places 3 Places Occasional Tables (upholstered or open) Upholstered low tables with laminate top and eco footings. Low tables with open shelf, laminate top and shelf. Posts and eco footings and have a nickel finish. 60 lb (27.3 kg) 6.5 u.t. (0.2 m 3 ) - T lb (50 kg) 12.5 u.t. (0.4 m 3 ) - T lb (27.3 kg) 6.5 u.t. (0.2 m 3 ) - S lb (40.9 kg) 6.5 u.t. (0.2 m 3 ) - S lb (40.9 kg) 9.4 u.t. (0.3 m 3 ) ½" 27" 21" 18" 13" Width ooting abric Y - N - N - - Width: width, 1 (1 place), 2 (2 places) or 3 (3 places). ooting: (eco) or H (casters - 1 place only). abric: rtopex seating fabrics. *The 2 and 3 place ottomans are available with (eco) footings only. ode T T S S ode Laminate abric YT - - L1 - - ode: product code, consult the list above. Laminate: the color of the laminate surface, see p.2 abric (if applicable): rtopex seating fabrics. abric 1.7 yd (1.6 m) - Upholstered 21"x 24" 2.3 yd (2.1 m) - Upholstered 21"x 48" general info executive / task lounge / reception visitor / café 71

72 general info visitor / café lounge / reception executive / task 2 lancelot Specifications: The Lancelot Series chairs, love seats, sofas and benches are lounge style seating and are offered with wood or metal footings. bench version is also available. The platform version is described on page 75. The backrest and the seat are composed of plywood surrounded by an Ultra- lex membrane covered in a high density polyurethane foam and a moisturewicking fiber layer. The arms are made of a plywood structure surrounded by a reinforced nylon membrane covered in a polyurethane foam. These armchairs, love seats and sofas are individually packaged in a box. 1 Width 3 L1 1 place ootings W Wood L2 2 places luminum rmchair (1 place) : 32" (813 mm) : 30" (762 mm) : 33" (838 mm) : 26" (660 mm) : 21½" (546 mm) : 19¼" (489 mm) G: 18½" (470 mm) L3 3 places 70.0 lb (31.8 kg) 25.5 u.t. (0.72 m 3 ) G 4 L1 - - L ode : L3--W-WM78-G odification: odification example: ooting Info on pictograms, see p.6. Width Sofa (3 places), wood footings (Natural Maple) and G78 fabric (gr.1). This sofa's list price is $2627. Wood (specify only if "W" footings are selected) Refer to the rtopex Wood sample card. abric Wood - abric ooting Wood abric Refer to the rtopex Seating abrics sample cards. ootings: W (wood) or (aluminum). Wood: If the "W" footing is chosen, specify the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics. - 4 abric 4.6 yd (4.21 m) 72

73 lancelot Love Seat (2 places) : 52½" (1334 mm) : 30" (762 mm) : 33" (838 mm) : 26" (660 mm) : 43" (1092 mm) : 19¼" (489 mm) G: 18½" (470 mm) 88.7 lb (40.3 kg) 41.5 u.t. (1.18 m 3 ) abric 7.2 yd (6.58 m) Sofa (3 places) : 75" (1905 mm) : 30" (762 mm) : 33" (838 mm) : 26" (660 mm) : 64½" (1638 mm) : 19¼" (489 mm) G: 18½" (470 mm) lb (54.9 kg) 57.5 u.t. (1.63 m 3 ) abric 10.0 yd (9.14 m) G L2 - - G L3 - - ooting - - Wood ooting Wood - - abric Specifiy ootings: W (wood) or (aluminum). Wood: If the "W" footing is chosen, specify the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics. abric Specifiy ootings: W (wood) or (aluminum). Wood: If the "W" footing is chosen, specify the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics. general info executive / task lounge / reception visitor / café 73

74 lancelot general info Ottomans (1-2-3 places) 1 Place Places Places visitor / café lounge / reception executive / task : 24" (610 mm) - 1 Place : 48" (1219 mm) - 2 Places : 72" (1829 mm) - 3 Places : 24" (610 mm) : 18½" (470 mm) 1 Place: 50 lb (22.7 kg) 6.7 u.t. (0.19 m 3 ) 2 Places: 65 lb (29.5 kg) 13.3 u.t. (0.38 m 3 ) 3 Places: 80 lb (36.3 kg) 20 u.t. (0.57 m 3 ) abric 1 Place: 2.5 yd (2.29 m) 2 Places: 3.8 yd (3.47 m) 3 Places: 5.1 yd (4.66 m) 1 Place 2 Places 3 Places L1 - N - L2 - N - L3 - N - ootings ootings ootings Specifiy ootings: W (wood) or (aluminum). Wood: If the "W" footing is chosen, specify the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics Wood Wood Wood abric abric abric 74

75 1 2 lancelot platform Specifications: The Lancelot Platform series is modular seating that allows for various arrangements. Just chose the base and add the desired modules. The specified configuration will be assembled in the plant with the exception of the bases. The backrest and the seat are composed of plywood surrounded by an Ultra- lex membrane covered in a high density polyurethane foam and a moisture-wicking fiber layer. The arms are made of a plywood structure surrounded by a reinforced nylon membrane covered in a polyurethane foam. The platform base is made of a 2" thick lightweight (honeycomb structure) HPL panel (laminated on both sides). ootings are made of 3" tubular steel, matching the ir - Techno collection, ooting assembly required. These products are individually packaged in a box. urniture configuration The furniture in the Lancelot Platform Series must be specified by combining various components such as the base (3 formats) with the top module or modules (6 choices), according to the determined positions. ases L1-1 1 module L2-1 1 module Top modules Module with 2 arms *L1 ase L2-2 2 modules L3-2 2 modules L3-3 3 modules - L1 ase : 28½" (724 mm) : 31½" (800 mm) : 33" (838 mm) : 25" (635 mm) : 21" (533 mm) : 19½" (495 mm) G: 18" (457 mm) H: 13" (330 mm) J: 28½" (724 mm) 61.6 lb (28 kg) 25.5 u.t. (0.7 m 3 ) R Module with arm at right L Module with arm at left *L2 ase - L2 ase : 57" (1448 mm) : 31½" (800 mm) : 33" (838 mm) : 25" (635 mm) : 49½" (1257 mm) : 19½" (495 mm) G: 18" (457 mm) H: 13" (330 mm) J: 28½" (724 mm) 100 lb (45.5 kg) 41.5 u.t. (1.2 m 3 ) N Module without arms "ushion" module *L3 ase - L3 ase : 85.5" (2172 mm) : 31½" (800 mm) : 33" (838 mm) : 25" (635 mm) : 78" (1981 mm) : 19½" (495 mm) G: 18" (457 mm) H: 13" (330 mm) J: 28½" (724 mm) 130 lb (59.1 kg) 57.5 u.t. (1.6 m 3 ) O "Table" space odification: - - S ode : L3-3-RNL-S2-SW-3002-G11 Surface (matching edge) Metal abric Width dimensions (seat) - Top modules R L N : 21" (533 mm) abric 3 yd (2.74 m) Info on pictograms, see p.6. ase Module Surface Metal odification example (see also page 77): Refer to page 2 or to the "Nature" laminate sample card. : 3002 (Polar White), 3064 (harcoal), 3090 (Silver) or 3311 (hampagne). hrome +$315 (L1 & L2), +$470 (L3). Refer to rtopex seating fabrics sample cards. : 24¾" (629 mm) abric 2.8 yd (2.5 m) - 4 J - abric 3-place configuration (3 modules: R, N, L), white laminate surface, white metal footings and G11 fabric (gr.1). This configuration's list price is $ H G : 28½" (724 mm) abric 2.5 yd (2.3 m) - N Module 1.7 yd (1.6 m) - Module general info executive / task lounge / reception visitor / café 75

76 lancelot platform general info Pricing grid "Platform" bases Modules L visitor / café lounge / reception executive / task L2-1 L3-2 Pricing method: odification L2-2 L3-3 ase L1-1 - ase L2-1 - ase L2-2 - Module ase Module L3-2 - Laminate - S S Module 1 Module 2 Laminate Module 1 Module 2 Metal Metal Laminate or the total price of your Lancelot Platform configuration, add the amount of the chosen base with that of the chosen upholstered module(s). abric abric Metal - S Laminate Metal abric - S R L N O abric No charge Module: code for the upholstered module (, R, L, N or ), or empty space (O), see grid above. Laminate: the 2" H.P.L. surface color (matching edge) of the platform base. Metal: the finish for the furniture's footings (3002, 3064, 3090 or 3311). hrome footing specify "", +$315 (L1 et L2) or +$470 (L3). abric: Refer to the rtopex seating fabrics. R Module "O" Module : mpty space L Module ase Module 1 Module 2 Module 3 Laminate Metal abric L S "Platform" base L3-2 ode : L3-2-RL-S

77 lancelot platform onfiguration examples L1-1-O-S2- _ - _ L1-1-N-S2- _ - _ - _ L1-1--S2- _ - _ - _ L2-2-OO-S2- _ - _ L2-2--S2- _ - _ - _ L2-2--S2- _ - _ - _ L2-1--S2- _ - _ - _ L2-2-O-S2- _ - _ - _ L2-2-O-S2- _ - _ - _ L2-2-RL-S2- _ - _ - _ L2-2-NN-S2- _ - _ - _ L2-2-ON-S2- _ - _ - _ 21" 24¾" L 24¾" R L3-2-RL-S2- _ - _ - _ L3-3-ORL-S2- _ - _ - _ L3-3-O-S2- _ - _ - _ L3-3--S2- _ - _ - _ L3-3--S2- _ - _ - _ L3-3-RNL-S2- _ - _ - _ 28½" N 21" ttention! ven though possible, certain configurations are not recommended due to the difference is the width of seat backs (whether the module has arms or not). This affects only the appearance. general info executive / task lounge / reception visitor / café 77

78 general info visitor / café lounge / reception executive / task 1 2 perceval Specifications: The Perceval Series chairs, love seats and sofas are lounge style seating with wood or metal footings. The lower front is available in fabric or metal. The 3 place sofa has two wider cushions. The backrest and the seat are composed of plywood surrounded by an Ultra- lex membrane covered in a high density polyurethane foam and a moisture-wicking fiber layer. The arms are made of a plywood structure surrounded by a reinforced nylon membrane covered in a polyurethane foam. These chairs, love seats and sofas are packaged separately. Please note that the weight is significant when ordered with the metal base. * When ordering 2 colors, the highest grade applied to the entire chair. Width P1 1 place ootings 4 5 abric 1 & 2 Wood : Refer to rtopex Wood sample card. P2 2 places P3 3 places rmchair (1 place) : 38" (965 mm) : 32" (813 mm) : 33" (838 mm) : 18" (457 mm) : 23½" (597 mm) : 21" (533 mm) G: 19½" (495 mm) Metal : ooting 92.0 lb (41.8 kg) 26.0 u.t. (0.74 m 3 ) abric (arms) 4.0 yd (3.66 m) 3002 (Polar White, +$55) 3090 (Silver, +$55) 3500 (hrome, +$315) abric 1 abric 2 abric 2 G ack : abric1 abric (seat) 2.6 yd (2.4 m) Metal front or abric 1 P1 - ooting 3 odification: ront abric T (no charge) ooting P ode : P3-WM78-T-OH35-L00 - Wood Metal hrome ront abric 1 abric 2 Info on pictograms, see p.6. Width odification example: ooting Sofa (3 places), wood footings (Natural Maple), fabric front, OH35 fabric (abric 1) and L00 fabric (abric 2). The list price of this sofa is 2983$. Metal : 3002 (Polar White) 3090 (Silver) 3500 (hrome) (applicable upcharge, refer to list) abric 1: rms, rear of seat back and front (if specified in fabric) * The abric 1 choice is automatically applied to the front if the front is specified in fabric (code T ). abric 2: ack rest and seat. Refer to rtopex seating fabric sample cards. abric 2 Metal front or abric 1 ront abric 1 abric 2 4 abric 2-5 abric 1 ootings : the finish for the footings : : wood, painted metal or chrome, see above. ront : the finish for the front : T (fabric - no charge), 3002 (Polar White metal + $80), 3090 (Silver metal + $80) or 3500 (hrome + $120). abric 1 : the fabric for the arms and back of the chair (and front if specified as "T"), refer to rtopex seating fabric sample cards. abric 2 : the fabric for the back and seat, refer tho rtopex seating fabric sample cards. *When ordering 2 different colors, the highest fabric grade price applies to the entire chair. ack : abric 1 78

79 perceval Love Seat (2 places) : 59" (1499 mm) : 32" (813 mm) : 33" (838 mm) : 18" (457 mm) : 23½" (597 mm) : 42" (1067 mm) G: 19½" (495 mm) abric 2 Metal front or abric lb (61.4 kg) 41.0 u.t. (1.16 m 3 ) abric (arms) 4.0 yd (3.66 m) Sofa (3 places) : 77" (1956 mm) : 32" (813 mm) : 33" (838 mm) : 18" (457 mm) : 23½" (597 mm) : 60" (1524 mm) G: 19½" (495 mm) abric lb (79.5 kg) 56.0 u.t (1.59 m 3 ) abric (arms) 4.6 yd (4.21 m) abric 1 abric 1 abric (seat) 4.4 yd (4.02 m) abric 2 Metal front or abric 1 abric (seat) 5.6 yd (5.12 m) abric 2 ack : abric 1 ooting G ack : abric 1 ooting G P ooting Wood Metal hrome ooting ront abric 1 abric 2 ootings : the finish for the footings : : wood, painted metal or chrome, see p.78. ront : the finish for the front : T (fabric - no charge), 3002 (Polar White metal + $160), 3090 (Silver metal + $160) or 3500 (hrome + $240). abric 1 : the fabric for the arms and back of the chair (and front if specified as "T"), refer to rtopex seating fabric sample cards. abric 2 : the fabric for the back and seat, refer tho rtopex seating fabric sample cards. *When ordering 2 different colors, the highest fabric grade price applies to the entire chair. ooting Wood Metal hrome ooting ront abric 1 abric 2 P ootings : the finish for the footings : : wood, painted metal or chrome, see p.78. ront : the finish for the front : T (fabric - no charge), 3002 (Polar White metal + $240), 3090 (Silver metal + $240) or 3500 (hrome + $360). abric 1 : the fabric for the arms and back of the chair (and front if specified as "T"), refer to rtopex seating fabric sample cards. abric 2 : the fabric for the back and seat, refer tho rtopex seating fabric sample cards. *When ordering 2 different colors, the highest fabric grade price applies to the entire chair. general info executive / task lounge / reception visitor / café 79

80 perceval general info Occasional Table ode Price 21" x 42" TM " x 30" TM visitor / café lounge / reception executive / task Occasional tables. 2" thick surface, HPL finish and painted metal or chrome base (add $265). : See price grid. : 21" (533 mm) : 9" (229 mm) Weight / volume 70 lb (31.8 kg) 5 u.t. (0.14 m 3 ) - 42" Wide 60 lb (27.2 kg) 4 u.t (0.1 m 3 ) - 30" Wide P - ode Surface Metal - S2 - - ode: onsult codes listed above. Surface: surface color for the table surface. Refer to p.2 or the "Nature" laminate sample card. Metal: the metal finish 3002 (Polar White), 3090 (Silver), or 3500 (hrome, + $265). 80

81 1 2 porthos Specifications: The chairs, love seats and sofas in the Porthos series are lounge style" and are offered with wood footings. The back and seat are comprised of a plywood structure wrapped in an Ultra-lex membrane upholstered in high density polyurethane foam and a moisture-wicking fiber layer. The arms are made of a plywood structure wrapped in reinforced nylon upholstered in molded polyurethane. These chairs, love seats and sofas are packaged individually. Width PT1 1 place rms PT2 2 places PT3 3 places W (wood surface) dd $200 rmchair (1 place) : 33" (838 mm) : 32" (813 mm) : 34¾" (883 mm) : 27¼" (692 mm) : 22" (559 mm) : 19¼" (489 mm) 80.0 lb (36.4 kg) 25.5 u.t. (0.7 m 3 ) abric 4.6 yd (4.21 m) odification: PT1 - PT odification example: Sofa (3 places), arms, Natural Maple finished footing and L10 fabric (grade 2). ode : PT3--W-WM78-L10 ooting W Wood Width This sofa's list price is $2983. Wood (ooting and "W" arms) - W - - rms ooting Wood abric Wood finishes the wood finish, refer to the rtopex Wood sample card. abric rms Info on pictograms, see p.6. Refer to the rtopex Seating abrics sample cards. rench seams on chairs covered with vinyl or leather (fabrics VM, O & M) Wood abric rms: or W (+$200). Wood: the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics general info executive / task lounge / reception visitor / café 81

82 porthos general info Love Seat (2 places) rms Wood abric visitor / café lounge / reception executive / task : 54¾" (1391 mm) : 32" (813 mm) : 34¾" (883 mm) : 27¼" (692 mm) : 44" (1118 mm) : 19¼" (489 mm) lb (52.2 kg) 41.5 u.t. (1.2 m 3 ) abric 7.2 yd (6.58 m) Sofa (3 places) : 76½" (1943 mm) : 32" (813 mm) : 34¾" (883 mm) : 25½" (470 mm) : 66" (1676 mm) : 19¼" (489 mm) lb (68.2 kg) 56.8 u.t. (1.6 m 3 ) abric 10.0 yd (9.14 m) PT2 - PT3 - - W - - rms: or W (+$200). Wood: the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics rms Wood - W - - abric rms: or W (+$200). Wood: the wood finish, refer to the rtopex Wood sample chart. abric: rtopex seating fabrics. 82

83 passenger / voyager Specifications: PSSNGR ST: One-piece chair design made of a tubular steel frame wrapped in rtopex s Ultra-lex membrane and covered with high density polyurethane foam which is then upholstered in a removable fabric. Molded gutter where the seat and back meet. VOYGR ST: One-piece chair design made of a tubular steel frame wrapped in rtopex s Ultra-lex membrane on the back and a molded plywood seat. The structure is covered in a high density polyurethane foam that is then enclosed in a fabric cover. The Passenger/Voyager System structure (base) is made of exposed beams and aluminum supports. The feet and finishing caps are made of zinc alloy, with a thermosetting powder finish. The main beam can be specified with an enamel finish, legs and armrests can be specified with an enamel or chrome finish. The sleeves for the armrests are black polyurethane IMPORTNT: This product is delivered UN-SSML. ssembly requires certain tools listed in the ssembly Guide, included with the product. Passenger/Voyager can be specified as individual components (see below) or in configurations (single or double rows, pages 85-86). n ottoman version and a foot-rest module option are also available. refer to the rtopex ustomer Service for more details. Individual omponents (See pages for typical configurations) Passenger (code P-) Voyager (code VO-) Individual seat Upholstered seat (see RIS on bottom of page 84), shipped with beam attachment supports. ssembly harware included. rms Steel arms (left or right), chrome or enamel finish (see INISHS on bottom of page 84). lack molded PV armrest and assembly harware included. Single leg (single row) Steel footing, chrome or enamel finish (see INISHS on bottom of page 84). Glides, central caps and assembly harware included. ouble leg (back-to-back rows) Steel footing, chrome or enamel finish (see INISHS on bottom of page 84). Glides, central caps and assembly harware included. Main beam luminum beam, enamel finish (see INISHS on bottom of page 84). as support between 2 leg sets, assembly harware included. P - S - VO - S - Left Right 1 Seat 2 Seats 2½ Seats 3 Seats 3½ Seats 4 Seats abric odification: P - L - P - R - P - S - P - - P - P1 - P - P2 - P - P2L - P - P3 - P - P3L - P - P4 - Info on pictograms, see p.6. - ode odification example: eam seat Passenger single configuration, aluminium finished beams, chrome legs and RN11 fabric (grade 1). ode : P-SR RN11 This assembly's list price is $4579. Legs Product code: Refer to the Price List section. abric eam: the finish of the main beam, see bottom of p.84. Legs: the finish of the legs, see bottom of p.84. abric: seat fabric, grades 0 to 5. Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr inish inish inish inish $190 $190 $515 $725 $130 $140 $180 $250 $325 $375 * hrome finish : +$50 * hrome finish : +$50 * hrome finish : +$80 * hrome finish : +$170 general info executive / task lounge / reception visitor / café nd beam luminum beam, enamel finish (see INISHS on bottom of page 84). to complete a row, assembly harware included. nd beam nd cap orner beam P - P - P - - P - PT - $75 $35 $110 83

84 visitor / café lounge / reception executive / task general info passenger / voyager Individual omponents (cont'd) (See pages for typical configurations) loor anchoring hardware Hardware kit to anchor seating assembly to floor. Includes 2 screws, 2 anchoring washers and 2 anchors for concrete flooring. Required for 1,2 or 3 seat configurations. P - K $ " 20.5" Regular Table Regular table offered in L.P.L., H.P.L., Solid ore (upon request) or glass. ssembly hardware included. surface finish (refer to page bottom). P - TS - Surface L.P.L. H.P.L. Solid ore $350 $400 $760 Glass $ " 20.5" nd table nd table offered in L.P.L., H.P.L., Solid ore (upon request) or glass. ssembly hardware included. surface finish (refer to page bottom). P - T - Surface L.P.L. H.P.L. Solid ore $295 $370 $580 Glass $1260 orner table orner table offered in L.P.L., H.P.L., Solid ore (upon request) or glass. orner beam, corner leg, supports and assembly hardware included. finish for beam, legs and surface (refer to page bottom). P - T " 28.4" - - eam Legs* * hrome finished legs : +$80. Surface L.P.L. H.P.L. Solid ore Glass $945 $1050 $1890 $3675 Regular table Regular table fills the space of a seat in an assembly. nd table nd table fills half the space of a seat in an assembly. orner table eam included with the corner table replace regular nd beams in this type of assembly. RIS rtopex fabrics Grades 0 to 5 fabrics M finishes harcoal (3064) lack (3067) Silver (3090) hampagne (3311) shen (3370) Leg or RMRST finishes harcoal (3064) lack (3067) Silver (3090) hampagne (3311) shen (3370) hrome () SUR finishes Refer to the Nature finish card (L.P.L. & H.P.L.). Solid ore & glass, consult the rtopex ustomer Service. 84

85 passenger SINGL ROW configurations 3 seat configuration shown (SR03) : See price grid. : 28½" (724 mm) : 35" (889 mm) : 17¼" (438 mm) Weight / volume Product not assembled when shipped, consult the rtopex ustomer Service. abric Quantity per seat, 4 seats minimum order 1.3 yd (1.19 m) P - OUL ROW configurations 6 seat configuration shown (R06) : See price grid. : 59½" (1511 mm) : 35" (889 mm) : 17¼" (438 mm) Weight / volume Product not assembled when shipped, consult the rtopex ustomer Service. abric Quantity per seat, 4 seats minimum order 1.3 yd (1.19 m) Nb. of seats im "" (width) P - ode eam Legs abric ode: See codes beginning with "SR..." listed in the above grid. eam: beam finish, see bottom of p.84. Legs: leg finish, enamel or (chrome*), see p.84. *or the chrome option add $160 (2-3-4 seats), $240 (5-6-7 seats) or $320 ( seats). abric: rtopex seating fabrics grades 0 to 5, leather not available. ode ode eam Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr ½" (121 mm) SR " (180 mm) SR ½" (240 mm) SR ¼" (300 mm) SR " (361 mm) SR ½" (420 mm) SR " (480 mm) SR ¾" (540 mm) SR ½" (601 mm) SR Nb. of seats im "" (width) ode Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr ½" (121 mm) R " (180 mm) R ½" (240 mm) R ¼" (300 mm) R " (361 mm) R ½" (420 mm) R " (480 mm) R ¾" (540 mm) R ½" (601 mm) R legs abric ode: See codes beginning with "R..." listed in the above grid. eam: beam finish, see bottom of p.84. Legs: leg finish, enamel or (chrome*), see p.84. *or the chrome option add $340 (4-6-8 seats), $510 ( seats) or $680 ( seats). abric: rtopex seating fabrics grades 0 to 5, leather not available. general info executive / task lounge / reception visitor / café 85

86 voyager general info SINGL ROW configurations visitor / café lounge / reception executive / task 3 seat configuration shown (SR03) : See price grid. : 28½" (724 mm) : 36½" (927 mm) : 17¼" (438 mm) Product not assembled when shipped, consult the rtopex ustomer Service. abric Quantity per seat, 4 seats minimum order 1.35 yd (1.23 m) VO - OUL ROW configurations 6 seat configuration shown (R06) : See price grid. : 59½" (1511 mm) : 36½" (917 mm) : 17¼" (438 mm) Product not assembled when shipped, consult the rtopex ustomer Service. abric Quantity per seat, 4 seats minimum order 1.35 yd (1.23 m) Nb. seats im "" (width) VO - eam Legs abric ode: See codes beginning with "SR..." listed in the above grid. eam: beam finish, see bottom of p.84. Legs: leg finish, enamel or (chrome*), see p.84. *or the chrome option add $160 (2-3-4 seats), $240 (5-6-7 seats) or $320 ( seats). abric: rtopex seating fabrics grades 0 to 5, leather not available. ode eam Gr.0 Gr.1 Gr.2 Gr.3 Gr.4 Gr ½" (121 mm) SR " (180 mm) SR ½" (240 mm) SR ¼" (300 mm) SR " (361 mm) SR ½" (420 mm) SR " (480 mm) SR ¾" (540 mm) SR ½" (601 mm) SR Nb. seats im "" (width) ode ode Gr.0 Gr.1 Gr.2 GR.3 Gr.4 Gr ½" (121 mm) R " (180 mm) R ½" (240 mm) R ¼" (300 mm) R " (361 mm) R ½" (420 mm) R " (480 mm) R ¾" (540 mm) R ½" (601 mm) R ode legs abric ode: See codes beginning with "R..." listed in the above grid. eam: beam finish, see bottom of p.84. Legs: leg finish, enamel or (chrome*), see p.84. *or the chrome option add $340 (4-6-8 seats), $510 ( seats) or $680 ( seats). abric: rtopex seating fabrics grades 0 to 5), leather not available. 86

87 1 element Specifications: The lement Series poufs are available in 18 and 36 modules. The seat is comprised of a wood structure covered in a polyurethane foam and a moisture-wicking fiber layer that is then enclosed in a fabric cover. Optional curved (ST) or linear (STT) topstitching matching the ir Line series is available on the seat. The lement poufs come with glides and some models are available with casters. Occasional tables available, see p. 89. Shapes Round Square Rectangle ooting G Glides 18" Modules : 18" (457 mm) : 20" (508 mm) H asters* for soft surface S asters* for hard surface 25.0 lb (11.4 kg) 4.6 u.t. (0,13 m 3 ) abric 1.6 yd (1.46 m) : 18" (457 mm) : 20" (508 mm) 30.0 lb (13.6 kg) 4.6 u.t. (0.13 m 3 ) abric 2.0 yd (1.83 m) Triangle rch * asters available on selected models only. 2 abric Refer to rtopex fabric sample cards. 3 Shape N - PR N ode : N-PS18-H-UR31-ST Round 18" diam Shape ooting abric OPTION Stitching Square 18" x 18" odification: odification example: OPTION ooting abric Stitching N - PS Info on pictograms, see p.6. 18" square pouf, with casters (for soft surface), fabric UR31 with curved pattern stitching option. This pouf's list price is $391. Stitching options ST urves STT Linear ooting: H or S (casters) or G (glides). abric: rtopex seating fabric. Stitching option: ST, STT (+$30). ooting: H or S (casters) or G (glides). abric: rtopex seating fabric. Stitching option: ST, STT (+$30). ode ooting abric Stitching * See product description for exact stitching pattern. ST Stitching ST Stitching OPTION 3 STT Stitching STT Stitching general info executive / task lounge / reception visitor / café 87

88 general info 18" Modules Shape Rectangle 18" x 36" visitor / café lounge / reception executive / task : 18" (457 mm) : 36" (914 mm) : 20" (508 mm) 55.0 lb (25.0 kg) 9.0 u.t. (0.25 m 3 ) abric 2.5 yd (2.29 m) : 18" (457 mm) : 20" (508 mm) 25.0 lb (11.4 kg) 4.6 u.t. (0.13 m 3 ) abric 1.4 yd (1.28 m) : 18" (457 mm) : 30" (762 mm) : 20" (508 mm) 70.0 lb (31.8 kg) 17.4 u.t. (0.49 m 3 ) abric 2.8 yd (2.56 m) N - Pi Shape N - PT18 - G - - N - P18 - G - - OPTION Triangle 18" x 18" Shape ooting abric Stitching ooting: H or S (casters) or G (glides). abric: rtopex seating fabric. Stitching option: ST, STT (+$35). abric OPTION Stitching OPTION ST Stitching ST Stitching abric: rtopex seating fabric. Stitching option: ST (+$30). * NOT: The linear stitching option (STT) and the "casters" footings are not available on this product. rch 30" x 30" abric abric: rtopex seating fabric. Stitching option: ST (+$35). Stitching ST Stitching * NOT: The linear stitching option (STT) and the "casters" footings are not available on this product. STT Stitching 88

89 element 36" Modules : 36" (914 mm) : 20" (508 mm) : 36" (914 mm) : 20" (508 mm) 36" and 18" Tables (upholstered base) 18" iameter base ode TMR lb (31.8 kg) 17.4 u.t. (0.49 m 3 ) 80.0 lb (36.4 kg) 17.4 u.t. (0.49 m 3 ) : 18" (914 mm) - TMR1818 : 36" (914 mm) - TMR3618 / TMR3636 : 20" (508 mm) abric 3.7 yd (3.38 m) abric 3.7 yd (3.38 m) 40 lb (18.2 kg) 4.6 u.t. (0.13 m 3 ) - TMR lb (31.8 kg) 17.4 u.t. (0.49 m 3 ) - TMR lb (45.5 kg) 17.4 u.t. (0.49 m 3 ) - TMR3636 abric 1.6 yd (1.5 m) - TMR3618 / TMR yd (3.4 m) - TMR " iameter base ode TMR " iameter base ode TMR3636 Shape N - PR36 - G - - N - PS36 - G - - Round 36" diam Shape abric OPTION Square 36" x 36" abric Stitching abric: rtopex seating fabric. Stitching option: ST, STT (+$40). * NOT: The "casters" footings are not available on this product. OPTION Stitching abric: rtopex seating fabric. Stitching option: ST, STT (+$40). * NOT: The "casters" footings are not available on this product. ode TMR1818 TMR3618 TMR3636 Surface ode L1/S1/S2 Surface N abric ST Stitching ST Stitching STT Stitching STT Stitching 1" TL (L1) " HPL (S1) " HPL (S2) " TL (L1) " HPL (S1) " HPL (S2) " TL (L1) " HPL (S1) " HPL (S2) ode: the model (TMR1818, TMR3618 or TMR3636, see illustrations above). L1/S1/S2: the code identifying the type of finish and thickness of the surface (L1, S1 or S2), example : TL 1" = L1, HPL 2" = S2, etc. Surface: the color of the surface (matching edge), see p.2. abric: the fabric (for the base), refer to rtopex seating fabrics sample cards. general info executive / task lounge / reception visitor / café 89

90 general info visitor / café lounge / reception executive / task e-max Specifications: The stackable -max chair series is offered with a sled or 4-leg base, with or without arms. The back is composed of a braided plastic on a tubular steel frame and with a molded foam slab. The seat is comprised of a foam slab over a plywood base. The optional arms, also made of tubular steel, are equipped with a black PV armrest. The optional writing tablet is made of particle board covered in high pressure laminate and is offered only on models without arms. The ganging bracket option (on models without arms) allows for the connection of two or more -max chairs to create groupings. These chairs are packaged up to 4 in a box. UU Upholstered seat Upholstered back ase 02 Sled rms NO arms N Metal IX arms X the visible structure's finish (legs and arms). N (black) (chrome, +$30) abric 02J Sled with ganging brackets (available on chairs without arms only) Refer to the rtopex Seating abrics sample cards Leg odification: M odification example: Struct. ase rms Metal abric hair with upholstered seat & back, sled base with ganging device, no arms, chrome finished base & U78 fabric. This chair's list price is $367. Info on pictograms, see p.6. ode : M-UU-02J-N--U

91 e-max : 19¼" (489 mm) : 23½" (597 mm) : 32" (813 mm) : 17¾" (451 mm) : 17½" (445 mm) : 17½" (445 mm) ase: Sled ack height: Low 18 lb (8.2 kg) 15.8 u.t. (0.45 m 3 ) abric 1.0 yd (0.9 m) ccessories Refer to page 96 for the complete list of accessories for the -max chairs. : 19¼" (489 mm) : 23½" (597 mm) : 32" (813 mm) : 17¾" (451 mm) : 17½" (445 mm) : 17½" (445 mm) 18 lb (8.2 kg) 15.8 u.t. (0.45 m 3 ) abric 1.0 yd (0.9 m) ase: 4-Leg ack height: Low rms ase rms Metal abric M - UU ase: 02 (sled) or 02J (sled, with ganging brackets). rms: N or X. Metal: base and arms finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. rms M UU 04 No arms No arms with brackets With arms No arms With arms rms Metal abric general info executive / task lounge / reception visitor / café ccessories Refer to page 96 for the complete list of accessories for the -max chairs. rms: N or X. Metal: base and arms finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. 91

92 general info visitor / café lounge / reception executive / task minimax Specifications: The Minimax series are stackable and are offered with a handle grip or standard back with sled or 4-leg base, with or without arms. The back is of braided plastic on a tubular steel frame with a molded polyurethane foam slab. The seat is comprised of plywood and a molded polyurethane foam slab. The optional arms, also made of tubular steel, are equipped with a black PV armrest. The optional writing tablet is made of particle board covered in high pressure laminate and is offered only on models without arms (refer to p. 96). The ganging bracket option (on models without arms) allows for the connection of two or more Minimax chairs to create groupings (refer to p. 96). These chairs are packaged up to 4 in a box. ack MH Handle ase 02 Sled rms NO arms Mi Standard UU Upholstered seat Upholstered back IX arms 02J Sled with ganging brackets (available on chairs without arms only) 5 6 odification: ack Struct. ase rms Metal abric odification example: Handle back, UU structure, sled base, fixed arms, black base & arm structure, Q82 fabric. This chair's list price is $347. Metal abric Info on pictograms, see p.6. ode : MH-UU-02-X-N-Q82 the visible structure's finish (legs and arms). N (black) (chrome, +$30) Refer to the rtopex Seating abrics sample cards N X 92

93 minimax ase: Sled ack height: Low : 19¼" (489 mm) - No arms : 22½" (572 mm) - With arms : 23½" (597 mm) : 32" (813 mm) : 17¾ " (451 mm) : 16½" (419 mm) : 17½ " (445 mm) 17.0 lb (7.7 kg) 15.8 u.t. (0.5 m 3 ) abric 0.9 yd (0.8 m) ack With handle (MH) Standard (Mi) ack rms No arms No arms with brackets ase rms Metal abric - UU ack: MH (with handle) or Mi (standard). ase: 02 (sled) or 02J (sled, with ganging brackets). rms: N or X. Metal: base and arms finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. ccessories Refer to page 96 for the complete list of accessories for the Minimax chairs With arms No arms No arms wit brackets With arms general info executive / task lounge / reception visitor / café 93

94 general info visitor / café lounge / reception executive / task primax Specifications: The Primax series chairs are stackable and offered with handle grip or standard backs and sled base, with or without arms. The back is of a braided plastic on a tubular steel frame with a molded polyurethane foam slab. The seat is comprised of plywood and a molded polyurethane foam slab. The optional arms, also made of tubular steel, are equipped with a black PV armrest. The optional writing tablet is made of particle board covered in high pressure laminate and is offered on models without arms (refer to p.96). The ganging bracket option (on models without arms) allows for the connection of two or more Primax chairs to create groupings (refer to p.96). These chairs are packaged up to 3 in a box. ack PH Handle UU Upholtered seat Upholtered back ase 02 Sled rms NO arms PM Standard IX arms 02J Sled with ganging brackets (available on chairs without arms only) 5 6 odification: ack Struct. ase rms Metal abric odification example: Standard back, UU structure, sled base, no arms, chrome base finish and Q23 fabric. This chair's list price is $348. Metal ode : PM-UU-02-N--Q23 the visible structure's finish (legs and arms). N (black) (chrome, +$30) abric Refer to the rtopex Seating abrics sample cards N X 94

95 primax ase: Sled ack height: Low : 19¼" (489 mm) - Without arms : 22½" (568 mm) - With arms : 22½" (568 mm) : 32½" (826 mm) : 18½" (470 mm) : 16½" (419 mm) : 17½" (445 mm) 17.0 lb (7.7 kg) 15.8 u.t. (0.5 m 3 ) abric 0.9 yd (0.8 m) ack With handle (PH) Standard (PM) ack rms No arms No arms with brackets ase rms Metal abric - UU ack: PH (with handle) or PM (standard). ase: 02 (sled) or 02J (sled, with ganging brackets). rms: N or X. Metal: base and arms finish N (black) or (chrome, +$30). abric: rtopex seating fabrics. ccessories Refer to page 96 for the complete list of accessories for the Primax chairs With arms No arms No arms with brackets With arms general info executive / task lounge / reception visitor / café 95

96 e-max - minimax - primax accessories PM-STR-general info ccessories Glides xtra glides (black nylon) for sled base, set of 4. ode: Mi-36 Price: $5 Transport/Storage cart Made of metal, capacity of 20 chairs, black enamel finish. ode: Mi-10 Price: $325 visitor / café lounge / reception executive / task : 21¼" (540 mm) : 25¼" (641 mm) : 18" (457 mm) 30.5 lb (13.8 kg) 6 u.t. (0.17 m 3 ) : 12" (305 mm) : 22" (559 mm) : 27" (686 mm) 6.5 lb (2.9 kg) 0.5 u.t. (0.02 m 3 ) Writing tablet H.P.L. surface mounted on a metal structure (black or chrome finish). the tablet's HPL color, refer to the "Nature" laminate sample card. Offered on chairs with no arms only. an be factory-installed upon request. Left or right, non-reversible. 90 o pivot for seating access. Price : $220. Tablet for -max & Minimax chairs Left writing tablet lack structure Left writing tablet hrome structure Right writing tablet lack structure Right writing tablet hrome structure Surface ode: the model (consult codes above). Surface: the color of the surface (matching edge), see p.2. Tablet for Primax chair Left writing tablet lack structure Left writing tablet hrome structure Right writing tablet lack structure Right writing tablet hrome structure Mi-STL-N- Mi-STL-- Mi-STR-N- Mi-STR-- PM-STL-N- PM-STL-- PM-STR-N- Surface 96

97 xpresso 1 (seat & back) Specifications: The Xpresso series is a monoshell plastic stackable chair that can be equipped with a fabric covered polyurethane foam (for the seat). The 4- leg base is comprised of tubular steel. The optional arms, also of tubular steel, are equipped with a black polyurethane armrest. stool version is also available. The chairs are packaged up to 4 in a box. PP Plastic seat Plastic back rms NO arms N Metal Plastic UP Upholstered seat Plastic back IX arms X dd $30 (on base 04 only) Visible structure's finish (legs and arms). (chrome) abric (if applicable) ase 04 4-Leg (shown) 01 lack 02 White 03 utter 04 Vermilion (orange) T4 4-Leg stool the seat cushion's fabric (if UP structure). Refer to the rtopex Seating abrics sample cards. odification: XO odification example: Struct. ase rms Metal Plastic abric UP structure (upholstered seat), 4-leg base, fixed arms, chrome base finish, black plastic and Ri22 fabric (seat). This chair's list price is $309. Info on pictograms, see p.6. ode : XO-UP-04-X--01-Ri22 general info executive / task lounge / reception visitor / café 97

98 xpresso general info ase: 4-Leg ack height: Low Plastic PP Plastic seat Plastic back 220 visitor / café lounge / reception executive / task : 21½" (546 mm) - Without arms : 24¾" (629 mm) - With arms : 21¾" (552 mm) : 32½" (826 mm) : 17½" (445 mm) : 16½" (419 mm) 15.2 lb (6.9 kg) 18.6 u.t. (0.5 m 3 ) abric (seat) 0.4 yd (0.37 m) UP Upholstered seat Plastic back ase: 4-Leg - Stool (no arm) ack: Low : 21½" (546 mm) - without arms : 24¾" (629 mm) - with arms : 21¾" (552 mm) : 44½" (1130 mm) : 29½" (749 mm) : 16½" (419 mm) Weight / volume 20.0 lb (9.1 kg) 18.6 u.t. (0.53 m 3 ) abric (seat) 0.4 yd (0.37 m) PP Plastic seat Plastic back UP Upholstered seat Plastic back XO : PP or UP rms: N (no arms, no charge) or X arms (+$30). Plastic: 01, 02, 03 or 04 (see p.2). abric: rtopex seating fabrics (only if "UP" structure is specified). Plastic 420 Struct. rms Plastic Struct. Plastic XO - - T4 - N abric abric : PP or UP Plastic: 01, 02, 03 or 04 (see p.2). abric: rtopex seating fabrics (only if "UP" structure is specified). 98

99 fabric Grade 1 OPN HOUS OH16 OH25 OH79 OH93 OH50 OH35 OH83 OH52 OH91 RN11 STTO QUTION LMNT MOO LLNT Grade L06 L04 L24 L03 L13 L09 L00 L10 L07 Grade 3 Q06 Q00 Q04 Q14 Q03 Q13 Q19 Q01 OMPONNT P00 P01 P02 P03 ST68 ST49 ST44 ST62 99

100 Grade 4 K02 K20 RP UROP RVRS K01 K03 K04 K05 K10 K30 K40 K50 Grade 5 U00 U06 U07 U04 U14 K62 K61 Leather M02 M76 M17 M42 M46 M61 M60 M41 M03 M45 Indicates fabrics made 100% from recycled fibers. 100

101 fabrics Grade O VM02 VM42 VM17 VM46 VM41 STLLR TL44 TL82 TL59 TL22 TL24 TL16 URN QUSR Q82 Q83 Q51 Q23 UR87 UR18 UR89 UR21 UR31 UR62 Grade 1 OLT GUG MTRIX RIPPL STUO VINYL VM60 Q91 Q92 U95 U73 U39 U78 U52 U10 Ri91 Ri82 Ri56 Ri42 Ri32 Ri22 MX91 MX81 MX42 MX53 MX32 MX21 G77 G22 G44 G33 G11 G78 O17 O14 O10 O07 O09 Note : olors are as precise as modern printing technology allows it. or more accuracy, refer to the real samples or finish cards. 101