T-17 Replacement Front Bumper with winch mount Toyota Tacoma WD & 2WD Sport W/Flares 074ST17A89A. Warranty
|
|
- Heather James
- 5 years ago
- Views:
Transcription
1 Warranty 1. If any product or part of a product manufactured by TJM is found to be defective during a period of three (3) years after the date of purchase, TJM shall repair (at TJM s discretion) the defective product or part. 2. Any defect in a product distributed by TJM, but not manufactured by TJM, shall be dealt with in accordance with, and to the extent of, the warranty offered by the manufacturer of that product. 3. TJM does not warranty that the products manufactured by it comply with the laws of the place where those product are purchased or used. It is the sole responsibility of the purchaser to ascertain whether products being purchased, or the affixation of those products to any other object, comply with local laws. 4. Except to the extent described in this warranty, TJM shall not be liable for any other claims, including claims arising from incorrect fitment, product or vehicle modification, faulty design, the use of the product on any indirect special or consequential damage or injury to any person, company or other entity. 5. Modification or alteration to any product manufactured by TJM to enable fitment in conjunction with other vehicle accessories or modifications (e.g. lift kits) will void any warranty claims. Read instructions fully before commencing fitment. Estimated Fitting Time: 1.5hrs Left hand and Right hand components are determined as seated in the vehicle. Check for (and remove) any build up in all captive nuts fitted to the FPS. Bolt tensions Dia. (mm) Nm ft.lbs Dia. (inch) Nm ft.lbs /4 9 7 All bolt tensions are as follows unless otherwise specified / / / / File:?? Page 1 of 7 28/6/2016
2 ITEM NO. Description PARTS LIST Qty 1 Chassis Mount Assembly 1 2 T17 replacement Bumper 1 3 TJM Emblem 1 4 Mounting Bracket RHS 1 5 Mounting Bracket LHS 1 Part Number 6 Winch Cover Plate Underbody Guard 1 ITEM NO. Description BOLT KIT Qty M12 x 37mm OD Flat Washer 20 M10 x 30mm Flat Washer 8 M6 x 12mm OD Flat Washer 24 M6 x 1.0 Nyloc Nut 6 M10 x 1.25 Nyloc Nut 4 M12 x 1.25 Nyloc Nut 10 M10 x 1.25 x 30mm Hex Bolt 4 M12 x 1.25 x 35mm Hex Bolt 10 M6 x 1.0 x 20mm Hex Bolt 6 M6 x 1.0 Flange Nut 12 M6 x 1.0 x 16mm Hex Bolt 12 Part Number File:?? Page 2 of 7 28/6/2016
3 Carefully remove bumper cover pulling from bottom front and upwards to remove. 1 File:?? Page 3 of 7 28/6/2016
4 After OEM front bumper and aluminum crash bar removal. The front of your Tacoma should look like picture at left. NOTE: outside bottom frame extension is removable and nutsert is in it, if it falls out you need to put it back into place. Optional factory TRD hook in equipped should be removed as well. TJM 070SB15N89ADS Tacoma Installation: 1. Using removed OEM hardware, install Chassis mount#80894 utilizing (3) OEM flanged nuts per side, and two lower supplied M12 x 1.25 x 35mm bolts into OEM nut-sert in bottom of frame (see install Fig#1). 2. Center TJM Chassis mount on front of Tacoma frame and tighten 6 front face OEM nuts first, and then OEM lowers. Install (2) supplied M10 x 1.25 x 30mm bolts; flat washers & nyloc s (see Fig#1). Tighten all too specified torque. File:?? Page 4 of 7 28/6/2016
5 Fig#1 Fig#2 File:?? Page 5 of 7 28/6/2016
6 3. If mounting a winch, knock out winch cut-out, then mount winch and utilize supplied remote mount solenoid bracket if necessary. (Different winch brands very in mounting please check with TJM to be sure your current or future winch is compatible). 4. If installing auxiliary lights, now is the time to do so. Your new TJM bumper light mounting bracket is designed and positioned to accommodate most of the aftermarket LED lights available. We tested 3 squire and round Baja Design, Rigid Design & Vision X during development. See figure below for positioning notes: 5. With help from another person, carefully position bumper over Chassis mount and install the supplied M12 x 1.25 x 35mm bolts x flat washers & Nyloc s nuts (Fig#1). Do not fully tighten at this time. File:?? Page 6 of 7 28/6/2016
7 6. Carefully adjust bumper up to achieve a ½ even gap between bottom top edge and fender/lower headlight trim. 7. As TJM have found variances between USA Tacoma models (factory build tolerances for mounting body panels), it is recommended that you spend some time positioning bumper before final torque settings are applied. 8. TJM highly recommends that you drill and pin the bumper skin to the mounting bracket bolted to the frame. Drill through bumper mounting plate using this 11mm hole in the frame mount on both sides using a 10mm drill or 7/16 drill bit and drill. Use supplied 10mm Hex bolts, flat washers and Nylock nuts. CAUTION: Always use eye protection when drilling holes. 9. Install lower underbody finishing guard utilizing supplied M6 x 1.0 x 20mm bolts, flat washers and Nyloc s. 10. Mount license plate to front of vehicles 11. Check and re-torque all hardware in accordance with TJM recommendations. 12. Congrats you ve just installed your TJM T-17 front bumper! If you should have any questions of concerns, please feel to contact us TJMUSA.com. File:?? Page 7 of 7 28/6/2016
INSTALLATION INSTRUCTIONS
Read instructions fully before commencing fitment. Left hand & Right hand components are determined as seated in the vehicle. Check for (& remove) any build up in all captive nuts fitted to the Bumper.
More informationT15 Fleet Frontal Protection System Vehicle: Mazda BT50 09/08+ Part No. 070SB15X46Z
Australian Standards Relating to Installing Vehicle Frontal Protection Systems (VFPS): AS 4876.1-2002 a) Do not attach V.F.P.S. to vehicle using anchorages not intended for this purpose (e.g. engine mounting
More informationBolt tensions Dia. (mm) Nm ft.lbs Dia. (inch) Nm ft.lbs
Product: Vehicle: FITTING INSTRUCTIONS T15 Fleet Bull Bar Nissan Pathfinder R51 / Nissan Navara D40 Part No. 070SB15F10L 070AP15F10L Australian Standards Relating to Installing Vehicle Frontal Protection
More informationT15 / T17 Frontal Protection Bar Ford Ranger / Mazda BT50 Part No. 070SB15F46Z 070AP15F46Z 074SB17N46Z
Australian Standards Relating to Installing Vehicle Frontal Protection Systems (VFPS): AS 4876.1-2002 a) Do not attach V.F.P.S. to vehicle using anchorages not intended for this purpose (e.g. engine mounting
More informationAirtec Snorkel Assembly Vehicle: Toyota FJ Cruiser 4.0L Petrol, 04/2011+ Part No. 011SAT0185A. Read instructions fully before commencing fitment.
Read instructions fully before commencing fitment. Estimated Fitting Time: 3hrs To provide a totally sealed intake system, it will be necessary to remove all under bonnet air-cleaner plumbing & provide
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PART # Product: Vehicle: 074ST17A89B FRONT BUMPER T17 Toyota TACOMA 2016 / ON (Third Gen) WARNING Read instructions completely before commencing fitment. Always use personal safety
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PART # 074ST17N22G Product: FRONT BUMPER Vehicle: FORD F250/350 SUPERDUTY 2011-2016 WARNING Read instructions completely before commencing fitment. Always use personal safety
More informationARB JEEP GRAND CHEROKEE WINCH BULL BAR (1996) No WARNING
ARB JEEP GRAND CHEROKEE WINCH BULL BAR (1996) No 3450060 WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION BAR DOES NOT AFFECT OPERATION
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS WJ2 FULL-WIDTH FRONT BUMPER APPLICATION: 2018 Jeep Wrangler JL PART NUMBER: 59-80105, 59-80115, 59-80125 CONTENT ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 FRONT BUMPER ASSEMBLY
More informationARB WINCH/NON WINCH BUMPER TO SUIT MITSUBISHI PAJERO NM FLARED. EXCLUDING EXCEED MODEL WARNING
ARB WINCH/NON WINCH BUMPER TO SUIT MITSUBISHI PAJERO NM FLARED. EXCLUDING EXCEED MODEL PRODUCT No. 3934020 Sahara Bar 3034020 Sahara Bumper FITTING KIT No. 6171383, 6171762, 6171363 WARNING FOR VEHICLES
More informationWARNING TAKE NOTE OF THE FOLLOWING: THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE HARDWARE SUPPLIED.
ARB COMBINATION BAR TO SUIT MITSUBISHI PAJERO NM PRODUCT No. 3434050 WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION BAR DOES NOT
More informationARMOR UP FOR YOUR NEXT ADVENTURE! 6530 Federal Blvd. Lemon Grove, CA (844) , ext
ARMOR UP FOR YOUR NEXT ADVENTURE! 6530 Federal Blvd. Lemon Grove, CA 91945 1(844)726-3373, ext. 102 info@pelfreybilt.com www.pelfreybilt.com 2016+ Toyota Tacoma Front Plate Bumper Start by removing the
More information31075 INSTALLATION INSTRUCTIONS
075 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 06-PRESENT MAKE: TOYOTA MODEL: TACOMA STYLE: PICKUP WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S
More informationRace Sport Lighting RSUKIT LED UNDERBODY KIT INSTALLATION GUIDE
Race Sport Lighting RSUKIT LED UNDERBODY KIT INSTALLATION GUIDE PARTS LIST (INCLUDED IN THE KIT) 1 x LED Control Center Box 2 x 48 RGB Aluminum Channel LED Bars 2 x 36 RGB Aluminum Channel LED Bars 1 x
More informationRAM HD Steering Stabilizer Clamp Installation Instructions
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SYNERGY MFG. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF SYNERGY MFG IS PROHIBITIED. Revisions Rev. Description
More information31033 INSTALLATION INSTRUCTIONS
10 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 011-PRESENT MAKE: JEEP / DODGE MODEL: GRAND CHEROKEE / DURANGO STYLE: SUV WARNING: NEVER EXCEED
More informationARB TACOMA COMBO BULL BAR 2005 ONWARDS. WARNING
ARB TACOMA COMBO BULL BAR 2005 ONWARDS. PART No 323030 Fitting Kit 67963 WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION BAR DOES
More informationMahindra Pikup (2009 Production Onwards)
Mahindra Pikup (009 Production Onwards) Steel Bull Bar INSTALLATION INSTRUCTIONS Accessory Part No. BBAR07 Installation Time: 60min Approx Bull Bar Weight: 60KG! Important: Please read each step of these
More information31033 INSTALLATION INSTRUCTIONS
10 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 011-CURRENT MAKE: JEEP / DODGE MODEL: GRAND CHEROKEE / DURANGO STYLE: SUV WARNING: NEVER EXCEED
More informationCommander Series Grille Guard
1 K Commander Series Grille Guard - Alpha Series Bumpers 2 Commander Grille Guard Pocket Centers 37.6 in. 42 in. - Contents - Kit Numbers. (3) - Introduction. (4) - Safety... (5) - Grille Guard Preparation......
More informationVOLKSWAGEN AMAROK TOWBAR FITTING INSTRUCTION
Part # 200 The installation kit contains sufficient components for fitment*. Do not substitute any components. A high degree of technical competence is necessary to correctly install this product. We recommend
More informationPRESENT, FORD TRANSIT, FRONT WINCH / HITCH MOUNT
4042 2013-PRESENT, FORD TRANSIT, FRONT WINCH / HITCH MOUNT Version 1.1 General Notes For the most up to date and current instructions, please visit our website at www.vancompass.com Please read all instructions
More information3.5 Oval Bull Bar. Part No. B1508S/B READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION
` 3.5 Oval Bull Bar Part No. B1508S/B Fits: 2005-2014 Toyota Tacoma REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. 60-180 min Cutting Not Required Drilling Not Required support@trailfx.com READ
More information31015 INSTALLATION INSTRUCTIONS
0 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 00-CURRENT MAKE: DODGE RAM MODEL: 00 STYLE: TRUCK WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S
More informationM-5230-V6 Mustang V6 Dual Exhaust Kit INSTRUCTION SHEET
Please contact the Techline for the most current instruction information (800) FORD788.!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: The use of a floor hoist is
More informationGM 2500,3500 Nerf Bar Installation Instructions
GM 2500,3500 Nerf Bar Installation Instructions Part # 100-7023-00 Fitment: 07-17 GM 2500/3500 Crew Cab 1) Remove Battle Armor nerf bar and hardware from box. Hardware supplied is shown below. Contains
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INC. APPLICATION: 2006-2008 FORD F-150 PART NUMBER: 45-92010, 40-92015 WINCH MOUNTED SPORTSMAN GRILLE GUARD ITEM QUANTITY ITEM DESCRIPTION TOOLS NEEDED 1
More informationKJ JEEP COMBINATION BULL BAR WARNING
KJ JEEP COMBINATION BULL BAR PRODUCT NUMBER FITTING KIT NUMBER 3450120 6171962 WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION BAR
More information3 BULL BAR 2015 CHEVY COLORADO/GMC CANYON (W) INSTALLATION INSTRUCTIONS 3 BULL BAR CHEVY COLORADO/GMC CANYON 2015 PART # /
(W) INSTALLATION INSTRUCTIONS CHEVY COLORADO/GMC CANYON 2015 PART # 502777/ 502779 Page 1 of 3 PARTS LIST: Qty Description Qty Description 1 3in Bull Bar 4 12-1.75mm Nylon Lock Nuts 1 Driver/left Mounting
More informationFront HD Bumper. Part No. FHDB003TI. PARTS LIST: Qty Part Description Qty Part Description
` HD Bumper Part No. FHDB003TI Fits: 2015-2016 Chevrolet Silverado 2500/3500 ASSISTANCE IS RECOMMENDED. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. 60-180 min Cutting Not Required Drilling
More information31056 INSTALLATION INSTRUCTIONS
305 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 00-00 MAKE: JEEP MODEL: COMMANDER STYLE: SUV WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS SPORTSMAN & HDX GRILLE GUARD APPLICATION: 2015 & UP Ford F-150 PART NUMBER: 40-3835, 45-3830, 57-3830, 57-3835 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1
More informationWARNING. When installed in accordance with these instructions, the front protection bar does not affect operation of the SRS airbag.
Part Number: 36030 Product Description: BULL BAR WINCH TYPE Suited to vehicle/s: CHEVROLET C/K 500-3500 988-998 YEAR MODEL RANGE AND Warn 9,500-5,000lb WINCHES WARNING REGARDING VEHICLES EQUIPPED WITH
More informationARB PRADO WINCH/NON WINCH BUMPER TO SUIT GXL, VX AND GRANDE 2003 ONWARDS.
ARB PRADO WINCH/NON WINCH BUMPER TO SUIT GXL, VX AND GRANDE 003 ONWARDS. PART No 390 500050 Top Tube Kit 50073 Buffer Kit With hole (required when fitting Top Tube) 50074 Buffer Kit With no hole FITTING
More informationINSTALLATION GUIDE PREMIUM FRONT BUMPER FOR RAM AEV30304AA Last Updated: 09/18/17
AEV30304AA Last Updated: 09/18/17 PREMIUM FRONT BUMPER FOR RAM 1500 INSTALLATION GUIDE PLEASE READ BEFORE YOU START To guarantee a quality installation, we recommend reading these instructions thoroughly
More informationPassenger/Right Side Frame Bracket. Driver/Left Side Frame Bracket. (4) Spacer Washers. (2) Bull Bar Mounting Brackets
PARTS LIST: 1 Bull Bar 12 s 1 Driver/Left Frame Mounting Bracket 1 Passenger/Right Frame Mounting Bracket 6 10mm Lock Washers 2 Bull Bar Mounting Brackets 6 10mm Hex Nuts 4 Large Spacer Washers 4 8-1.25mm
More information3.5" Oval Bull Bar. Part No. B1519S/B. PARTS LIST: Qty Part Description Qty Part Description
` 3.5" Oval Bull Bar Part No. B1519S/B Fits: 2017 Ford F250/350/450/550 Super Duty THE BULL BAR MAY INTERFERES WITH PARKING SENSORS, PROXIMITY SENSORS AND CRUISE CONTROL SENSORS. REMOVE CONTENTS FROM BOX.
More informationPRESENT, FORD TRANSIT, FRONT TOW POINT Version 1.0
4039 2013-PRESENT, FORD TRANSIT, FRONT TOW POINT Version 1.0 General Notes For the most up to date and current instructions, please visit our website at www.vancompass.com Please read all instructions
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS HD BUMPER Kit 66240 (BLACK), 74760 (BLACK) & 74690 TUBELESS (TEXTURED BLK) For 03-Newer Chevy 3/4 Ton Trucks As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS.
More informationM-5230-V6 Mustang V6 Dual Exhaust Kit INSTRUCTION SHEET
Please visit www.fordracingparts.com for the most current instruction information.!!! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION. AT ANY TIME YOU DO NOT UNDERSTAND THE
More informationINSTALLATION INSTRUCTIONS
REV 1 05/04/2017 INSTALLATION INSTRUCTIONS PART NO. 24388T PRODUCT DESCRIPTION: FRONT BUMPER REPLACEMENT APPLICATION: TOYOTA TACOMA PRODUCT SAFETY & LEGAL DISCLAIMER IMPORTANT READ ALL INSTRUCTIONS CAREFULLY
More informationWinch Mounting Plate for Wrangler
Winch Mounting Plate for 87-06 Wrangler Installation Manual # 92122.2900 Winch Plate is designed to accommodate standard winch mounting footprint. Should it become necessary to drill into plate, do so
More informationDetroit Speed, Inc. Detroit Speed Control Arm and Spindle Kit A-Body P/N: &
Detroit Speed, Inc. Detroit Speed Control Arm and Spindle Kit 1964-72 A-Body P/N: 030104 & 030105 The Detroit Speed A-Body front suspension kit is a bolt-on package that addresses the shortcomings of the
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD / HDX WINCH MOUNT GRILLE GUARD / MAX WINCH MOUNTING SYSTEM APPLICATION: 2016 Chevrolet Silverado 1500 PART NUMBER: 40-93875,
More informationLAND ROVER DISCOVERY 3 ARB BULL BAR AND WINCH BAR WARNING
LAND ROVER DISCOVERY 3 ARB BULL BAR AND WINCH BAR PART No 3432150 DISCOVERY 3 WINCH BAR PART No 3232150 DISCOVERY 3 BULL BAR WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS POLICE PUSH BAR ELITE XD APPLICATION: 015-018 Ford F-150 PART NUMBER: 3-505 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 GRILLE GUARD ASSEMBLY 1MM SOCKET,3 LOWER MOUNTING BRACKET,
More information2015 Ford F Bull Bar
PARTS LIST: 2015 Ford F150 3.5 Bull Bar Qty Description Qty Description 1 3.5in Oval Bull Bar 2 10mm U-Bolt (for use on closed frames only) 1 Driver side Frame Bracket 4 10-1.50mm x 35mm Hex Bolts 1 Passenger
More informationInstallation Guide Suzuki GSXR 600/750
Installation Guide 2006-2007 Suzuki GSXR 600/750 Congratulations on the purchase of your new TaylorMade underbelly exhaust kit for your GSXR. Your new exhaust is fabricated from thin wall stainless steel
More informationDODGE CUMMINS DUAL PUMP & DELUXE DUAL PUMP KIT
SUBJECT: DODGE CUMMINS DUAL PUMP & DELUXE DUAL PUMP KIT Page 1 of 10 FITMENT: 2003 2007 Dodge Cummins with 5.9L KIT P/N: FPE-DPK-59-NP-[BK,BL,OG,RD], FPE-DPK-59-NP-DX [BK,BL,OG,RD], FPE-DPK-59-3K-[BK,BL,OG,RD],
More informationSAFETY. Read and understand all safety precautions and instructions before installing this product.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationInstallation Instructions
Installation Instructions RedRock 4x4 3 in. Bull Bar w/ Skid Plate & 20 in. Single Row LED Light Bar Black (Polished) () Part# T531165 (T531166) PARTS LIST: 1 Bull Bar 8 12mm x 32mm OD x 3mm Flat Washers
More informationWARNING THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE HARDWARE SUPPLIED.
TOYOTA TACOMA (USA) PRODUCT NUMBER 3423020 WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION BAR DOES NOT AFFECT OPERATION OF THE
More informationPassenger/Right. Driver/Left. Driver/Left Side Frame. Mounting Bracket. (2) 12mm Double Nut Plates (models without tow hooks)
PARTS LIST: Qty Description Qty Description 1 Grille Guard 4 10-1.5mm x 30mm Hex Bolt 1 Driver/left Frame Bracket 8 10mm x 24mm OD x 2.2mm Flat Washer 1 Passenger/right Frame Bracket 4 10-1.5mm Nylon Lock
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS SPORTSMAN GRILLE GUARD / HDX GRILLE GUARD APPLICATION: 2016 Chevrolet Silverado 1500 PART NUMBER: 40-3875, 45-3870, 57-3870, 57-3875 ITEM QUANTITY DESCRIPTION
More informationPlease read BOTH these Installation Instructions and the General Information sheet prior to installing or operating this equipment.
Attachment Tab Height: 24-1/4 Serial Number Attachment Tab Width: 24 Please read BOTH these and the General Information sheet prior to installing or operating this equipment. 1. Blue Ox towing products
More informationINSTALLATION INSTRUCTIONS ELITE FRONT BUMPER Part Number: w/ Grille Guard & w/o Grille Guard Application: Jeep JK 2007+
INSTALLATION INSTRUCTIONS ELITE FRONT BUMPER Part Number: 87750 w/ Grille Guard & 87775 w/o Grille Guard Application: Jeep JK 2007+ GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is
More informationOperating Instructions & Parts Manual. Fuel Tank Adapter
Operating Instructions & Parts Manual Fuel Tank Adapter Model Number 40080 Capacity 80 lb.! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
More informationChevy Colorado/GMC Canyon 30 Grille Kit Installation Instructions
Chevy Colorado/GMC Canyon 30 Grille Kit Installation Instructions 44-7597 185 Bosstick Boulevard San Marcos CA 92069 Phone 760-560-2252 Fax 760-560-0383 info@bajadesigns.com www.bajadesigns.com 1 LIMITED
More informationWARNING THIS PRODUCT MUST BE INSTALLED EXACTLY AS PER THESE INSTRUCTIONS USING ONLY THE HARDWARE SUPPLIED.
LAND ROVER DISCOVERY DELUXE AND WINCH BULL BARS No 32/3432050 (JANUARY 1995 ONWARD) WARNING FOR VEHICLES EQUIPPED WITH SRS AIRBAG WHEN INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS, THE FRONT PROTECTION
More informationINSTALLATION GUIDE: CAT Fuel Filter Adapter Dodge 5.9L Cummins
INSTALLATION GUIDE: CAT Fuel Filter Adapter 004.5 007 Dodge 5.9L Cummins ! DISCLAIMER ) By installing this product onto your vehicle, you assume all risk and liability associated with its use. ) It is
More informationInstallation Instructions PART NUMBERS: 76145, 84145, CQT76145
Cequent Performance Products, Inc. Installation Instructions PART NUMBERS: 76145, 84145, CQT76145 LIMITED LIFETIME WARRANTY To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: ALWAYS read, understand
More informationInstallation Instructions: (Part # SB612850) TOYOTA FJ CRUISER M1 Front Bumper Kit
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-9101 M1 Front Bumper 1 93-9117 Winch Mounting Plate 1 90-9131 Window Bezel: Drvr 1 90-9132
More informationINSTALLATION INSTRUCTIONS ELEVATION REAR BUMPER FORD F150
INSTALLATION INSTRUCTIONS PARTS LIST: 1 Elevation Bumper Assembly 2 Plastic Plugs (license plate mount) 6 12-1.75mm x 50mm Hex Bolts 8 4mm x 10mm Socket Head Screws 12 12mm x 37mm OD x 3mm Flat Washers
More informationINSTALLATION INSTRUCTIONS
08 YEARS: 07-CURRENT Safety glasses should be worn at all times while installing this product. INSTALLATION INSTRUCTIONS MODEL: RIDGELINE MAKE: HONDA STYLE: TRUCK WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S
More information31068 INSTALLATION INSTRUCTIONS
31068 INSTALLATION INSTRUCTIONS YEARS: 009-CURRENT MAKE: FORD MODEL: EXPEDITION STYLE: SUV 009-CURRENT LINCOLN NAVIGATOR SUV 009-014 FORD F-150 TRUCK WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED
More informationInstallation Instructions
Where STRENGTH Meets Style! TM I. SAFETY THE SAFETY OF YOU AND OTHERS IS VERY IMPORTANT TO US! In order to minimize this risk and make an informed decision about safety, it is important that you carefully
More informationPlease visit for the latest version of these installation instructions.
Please visit www.blueox.com for the latest version of these installation instructions. BX2409 2009-18 Dodge Ram 1500 Sport/ST/Laramie Limited Please read BOTH these and the General Information sheet prior
More information31034 INSTALLATION INSTRUCTIONS
0 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 00-PRESENT MAKE: HYUNDAI MODEL: SANTA FE STYLE: SUV WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN & HDX GRILLE GUARD AUTOMOTIVE PRODUCTS, APPLICATION: 05-07 Ford F-50 PART NUMBER: 0-3835, 5-3830, 57-3830, 57-3835 ITEM QUANTITY DESCRIPTION TOOLS NEEDED GRILLE GUARD
More informationPSM-BT-BP - stationary... 6 PSM-DL-BP - stationary Part List... 8
Mixer Stands - Manual Lift - OWNERS MANUAL Warranty Our products are guaranteed against defective materials and workmanship, we will repair or replace such items as may prove defective at our option. Warranty
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS ULTIMATE BULL BAR APPLICATION: 2009-2018 Dodge Ram 1500 (Excl. Rebel Model) 2019 Dodge Ram 1500 Classic PART NUMBER: 32-1960, 32-1965, 32-1960L, 32-1965L
More informationTOYOTA TUNDRA SKID PLATE Preparation
Preparation Part Number: PT98-4140 Kit Contents Item # Quantity Reqd. Description 1 1 Skid Plate (Pre-Assembled with Hardware) 2 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description 1
More informationOPT7 LED AURA UNDERBODY KIT GENERAL INSTALLATION GUIDE
1 x LED Control Box 2 x 48 OPT7 LED Bars with Smart-Color LEDs 2 x 36 OPT7 LED Bars with Smart-Color LEDs 1 x E-Z Remote (Batteries Included) 1 x E-Z Keychain Remote (Batteries Included) 4 x 10ft LED Strip
More informationHolley Accessory Drive Kit Part Number
Assembly Instructions Holley Accessory Drive Kit Part Number 20-133 Table of Contents Parts List:... 2 Passenger s Side Bracket Installation:... 3 A/C Compressor Installation:... 4 Idler & Tensioner Installation:...
More informationPN# 64660K Nissan Frontier/ Xterra Suzuki Equator 2WD/4WD 2 1/2 Front & 1 1/2 Rear Spacer Kit PRO COMP SUSPENSION
2360 Boswell Road Chula Vista, CA 91914 Phone 619.216.1444 Fax 619.216.1474 E-Mail tech@explorerprocomp.com PRO COMP SUSPENSION Suspension Systems that Work! PN# 64660K 2005-2011 Nissan Frontier/ Xterra
More informationBJ100SY FITTING INSTRUCTIONS
BJ100SY FITTING INSTRUCTIONS REPLACES: 00.00.00 REVISED: 15.07.13. Check installation hardware before commencing. Special Tools: T15 Torx bit and required drivers. 1. Lift Bonnet JEEP WRANGLER JK 08 on
More informationATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
INSTALLATION MANUAL PROMASTER MOUNTING CHANNEL KIT (2115-0-01) ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT. 1/2 in Wrench/ Socket
More informationAir Lift. Kit Honda Prelude ( ) PERFORMANCE INSTALLATION GUIDE
Air Lift PERFORMANCE Kit 75532 Honda Prelude (1992-2001) Cover illustration may not depict actual kit. MN-542 (06708) ECR 6206 INSTALLATION GUIDE For maximum effectiveness and safety, please read these
More informationJEEP CHEROKEE, WAGONEER (XJ) FRONT BUMPER INSTALLATION INSTRUCTIONS KIT# W/ WINCH KIT# 83203
3651 N Highway 89 Chino Valley, AZ 86323 (928) 636-7080 www.p-a-g.net JEEP CHEROKEE, WAGONEER (XJ) FRONT BUMPER INSTALLATION INSTRUCTIONS 1984-2001 KIT# 83202 1984-2001 W/ WINCH KIT# 83203 WARNING Before
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS ULTIMATE BULL BAR APPLICATION: 2003-2014 Ford Expedition 2007-2014 Ford Expedition EL 2003-2014 Lincoln Navigator L 2/4WD 2009-2014 Ford F-150 2015-2017 Ford
More informationINSTALLATION INSTRUCTIONS
Installation instructions for 2007-2012 Toyota FJ: PN FJ-19336 ** Inspect bumper and all parts prior to installation. Contact us at 951-808-0750 for missing parts. Hardware list: QTY 4 M10X30MX1.5 HEX
More informationmm Hex Nuts. (2) 10mm x 35mm Bolt Plates
PARTS LIST: SPORT BAR 1 Sport Bar 8 12mm x 24mm OD x 2.5mm STD Flat Washers 1 Driver/Left Frame 6 12mm Lock Washers 1 Passenger/Right Frame 4 12-1.75mm Hex Nuts 1 Driver/Left Tube 2 10-1.50mm x 30mm Hex
More informationPARTS LIST TORQUE SPECIFICATIONS
INSTALLATION INSTRUCTIONS Trans4mer Mounting System Toyota Tacoma Kit No. 32522(black) or 32523(chrome) PARTS LIST PART NO. QUANTITY DESCRIPTION 32503 1 FRAME EXTENSION, R.H. 32504 1 FRAME EXTENSION, L.H.
More informationFitment and Required Components Guide and Assembly Instructions. Holley Accessory Drive Kit Part Number , , &
Fitment and Required Components Guide and Assembly Instructions Holley Accessory Drive Kit Part Number 20-159, 20-160, & 20-162 1 Table of Contents: Introduction:... 4 Crank Pulley Belt Alignment Determination:...
More informationINSTALLATION INSTRUCTIONS
REV 1 05/04/2017 INSTALLATION INSTRUCTIONS PART NO. 24388T PRODUCT DESCRIPTION: FRONT BUMPER REPLACEMENT APPLICATION: TOYOTA TACOMA PRODUCT SAFETY & LEGAL DISCLAIMER IMPORTANT READ ALL INSTRUCTIONS CAREFULLY
More informationBX Jeep Liberty Renegade 2012 Jeep Liberty Sport Installation Instructions
Attachment Tab Height: 17.5 Attachment Tab Width: 24 Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and accessories
More informationAssembly Instructions. Holley Accessory Drive Kit Part Number
Assembly Instructions Holley Accessory Drive Kit Part Number 20-131 Table of Contents Parts List:... 2 Driver s Side Bracket Installation:... 3 Power Steering Pump Installation:... 4 Idler Pulley Installation
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PRODUCT DESCRIPTION APPLICATION: 2010-2018 Dodge Ram 2500/3500 PART NUMBER: 58-161015 CONTENT ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 BUMPER ASSEMBLY 18MM SOCKET 2,3 2 MOUNTING
More information2012+ Tacoma APEX Front Bumper Instructions
Important notices: 2012+ Tacoma APEX Front Bumper Instructions These instructions are intended only as a general guide for installing All-Pro products. For some items, specialized mechanical skills, metal
More informationAWE Track Edition Exhaust System Ford Focus ST 2.0T. AWE website here
Thank you for purchasing the AWE Track Edition Exhaust System for the 2013+ Ford Focus ST 2.0T. For up-to-the-minute fitment information, be sure to visit the Ford Focus section of the AWE website. As
More informationPlease visit for the latest version of these installation instructions.
Please visit www.blueox.com for the latest version of these installation instructions. Attachment Tab Height: 19-1/2 Serial Number Attachment Tab Width: 19 Please read BOTH these and the General Information
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD / MAX WINCH TRAY HDX WINCH MOUNT GRILLE GUARD APPLICATION: 2017 Ford F250/350 Super Duty PART NUMBER: 40-93905, 45-93900,
More information2236 Sway Bar Installation Instructions
2236 Sway Bar Installation Instructions Thank you for your purchase of this Hotchkis Performance product. Your stabilizer bar set was designed with the performance and durability you ve come to expect
More informationINSTALLATION INSTRUCTIONS
AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS POLICE PUSH BUMPER ELITE XD APPLICATION: 2016 Chevrolet Silverado 1500 PART NUMBER: 36-53875 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 PUSH BUMPER ASSEMBLY
More informationFitting Instruction for EZI-GRIP Bike Rack
Fitting Instruction for EZI-GRIP Bike Rack Congratulations on purchasing Ezi-Grip to carry your valued bicycles. We are sure you will get many years of enjoyable use from your Ezi-Grip Bike Rack. These
More informationWARNING. When installed in accordance with these instructions, the front protection bar does not affect operation of the SRS airbag.
Part Number: 343870 F/Kit 17557 Product Deluxe Combination Winch and Non Winch Bull Bar Description: Suited to Nissan XTERRA 05ON USA Only vehicle/s: WARNING REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG;
More information31087 INSTALLATION INSTRUCTIONS
31087 INSTALLATION INSTRUCTIONS Safety glasses should be worn at all times while installing this product. YEARS: 019-PRESENT MAKE: RAM MODEL: 1500 STYLE: TRUCK WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S
More informationToyota Kluger. (2010 Production Onwards) ALLOY NUDGE BAR INSTALLATION INSTRUCTION
Toyota Kluger (200 Production Onwards) ALLOY NUDGE BAR INSTALLATION INSTRUCTION Accessory Part No. NBAR0029 Installation Time: 60min Approx Nudge Bar Weight: 4KG! Important: Please read each step of these
More informationWood Grain Warrior Line Incognito hidden winch bumper installation instructions Lexus GX470
Wood Grain Warrior Line Incognito hidden winch bumper installation instructions 2003-2009 Lexus GX470 Version 1.0-2016 Thank you for purchasing the Southern Style OffRoad Wood Grain Warrior Line Lexus
More informationTechnical Support Line: (952) Hanover Ave. Lakeville, MN
Technical Support Line: (952) 985-5675 Email: Sales@QA1.net 21730 Hanover Ave. Lakeville, MN 55044 www.qa1.net INSTALLATION INSTRUCTIONS QA1 1967-1979 Mopar A-Body Rear 6 link Conversion System QA1 p/n
More information