Series 40 MMF044D and MMV044D Axial Piston Motors. Parts Manual
|
|
- Tamsin Andrews
- 5 years ago
- Views:
Transcription
1 Series 40 MMF044D and MMV044D Axial Piston Motors
2 2003, 2008 Sauer-Danfoss. All rights reserved L586 Rev AA January 2008 Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material. Sauer-Danfoss reserves the right to alter its products without prior notice. This also applies to products already ordered provided that such alterations aren t in conflict with agreed specifications. All trademarks in this material are properties of their respective owners. Front cover illustrations: P , P , P , P
3 Contents General Information Service parts identification... 4 Nameplate... 4 Date code... 5 Service bulletins... 5 Procedure to identify a part... 6 Fixed displacement variable displacement service bulletin Order code, fixed displacement... 7 Input shaft seal Input shaft End cap Cylinder block kit Housing Common parts Special hardware Overhaul seal kit...34 Order code, variable displacement...35 Input shaft seal Input shaft Swashplate/minimum displacement Control features Housing/end cap Common parts Special hardware Overhaul seal kit...42 SB (shaft bearing change)...43 SB (dowel pin change)...44 SB (valve plate change)...45 SB (trunnion seal change)...46 SB (change from woodruff key to straight key on tapered shaft)...47 SB (shaft seal)...48 SB (loop flush return spring)...49 SB (shaft seal)...50 B520L586 Rev AA January
4 General information Service parts indentification Use this information and procedure to identify the module group, item number, manufacture date, part number, and part name of the parts included in the Series 40, M44 fixed and variable displacement motors. Use the parts listed when performing minor repairs, major repairs, or conversions on the Series 40: M44 motors. nameplate Each unit has a nameplate affixed to its housing. The nameplate includes this information: Model Code The Sauer-Danfoss model code defines the specific unit. Use it when ordering parts to service this product. Model Number The manufacturing factory uses Sauer-Danfoss model number. On repeat orders, order a complete unit by the model number. Serial Number The Sauer-Danfoss serial number identifies the manufacture date and unit sequence in the build. The serial number also identifies the unit s warranty time period. Model Code Model No. MMF044D A F M A B NNS K Serial No. MADE IN U.S.A. Typ Ident-Nr Fabr-Nr The letter code indicates the location of original manufacture (assembly). K indicates the unit was originally assembled in Lawrence, Kansas, USA. The first number (2 digits) indicates the year of manufacture. (01 indicates the unit was manufactured in 2001). The second number (2 digits) indicates the calendar week of manufacture. The third number (5 digits) is a sequential number that identifies a specific unit L586 Rev AA January 2008
5 General information date code The date code is the year and week of manufacture. The same item number may list more than one part number. This indicates that there is more than one configuration for that item number. You will see that there are different date codes for different part numbers. Find the date code of your unit on the nameplate to determine the service part number you need to order. EXAMPLE: The service part desired is Item D02. Order date Date Qty. per code Item begin end Part number Part name model/kit N D Square key (SB ) 1 D ( ) Woodruff key 1 All units using this order code with a date code of 96-32, up to and including 02-47, must use part number All units with a date code of 02-48, and newer, must use part number service bulletins A Service Bulletin Number (SB- - _) may follow the part name of the part you desire. Read that Service Bulletin before ordering that part. The information contained in these Service Bulletins, as of the print date, are at the end of this manual. Service Bulletins contain more detailed information such as interchangeability, what additional parts are involved, and so forth. We suggest that you add additional Service Bulletins to this manual as you recieve them. B520L586 Rev AA January
6 General information procedure to identify a part General The modular design of Series 40 units results in a simplified service parts list and part number identification procedure. The same item numbers are used for same part names on all units within a product type. (Example: The shaft lip seal, Item C01, has the same item number on all motors.) A part number that has another number following in parentheses makes this a worldwide manual. The first number is sold in Germany. The number, in parentheses, is sold in the United States. (Example: ( ); customers order if ordering the part in the United States.) Example of a part identification The nameplate on a Series 40 motor has an Order Code of MMF044D A F M A B NNS. Do this to determine the part number of the drive shaft used on this pump: 1) Referring to the input shaft module in the Order Code (see page 7), the output shaft option for this motor is identified by the code F. (MMF044D A F M A B NNS) 2) Referring to the Service Parts List, find the shaft group. 3) Find the order code that relates to this unit, which is F. 4) The shaft is Item D01. 5) The part number L586 Rev AA January 2008
7 Order code M M F D A F M A B N N S product special hardware frame size housing type cylinder block seal group end cap output shaft P E B520L586 Rev AA January
8 (A) c01 C02 c03 (B) c01 C02 c03 (C) c04 C05 c04 C05 (1) d05 (A and L) d05 d04 d01 d01 d01 (C and F) d04 d05 d01 (N) d02 d04 d05 (6 and S) d05 d04 d02 d01 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing 8 520L586 Rev AA January 2008
9 input shaft seal Order date Date Qty. per code Item begin end Part number part name model/kit A C Lip seal (SB ) 1 C Support washer 1 C Retaining ring 1 B C Lip seal (SB ) 1 C Support washer 1 C Retaining ring 1 C Lip seal 1 C Retaining ring 1 C C Lip seal 1 C Retaining ring 1 input shaft 1 D Shaft, 23-tooth spline/no auxiliary 1 D Retaining ring 1 6 D Shaft, straight keyed, dia. 1 D Key 1 D Retaining ring 1 D Retaining ring 1 A D Shaft, 13-tooth spline/no auxiliary 1 D Retaining ring 1 D Retaining ring 1 C D Shaft, 13-tooth spline/13-tooth auxiliary 1 D Retaining ring 1 D Retaining ring 1 F D Shaft, 15-tooth spline/no auxiliary 1 D Retaining ring 1 D Retaining ring 1 L D Shaft, 13-tooth spline with M8 tapped hole 1 D Retaining ring 1 D Retaining ring 1 N D Shaft, tapered (SB ) 1 D Square key (SB ) 1 D Woodruff key 1 D Retaining ring 1 D Retaining ring 1 S D Shaft, straight keyed,.875 dia. 1 D Key 1 D Retaining ring 1 D Retaining ring 1 B520L586 Rev AA January
10 E32 e26a E27 e32a E26 E29 E30 E08 e08a E01 e04 E03 e33a E33 e17a E17 E10 E09 E07 E06 E15 e11a E16 E11 e06a E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
11 end cap Order date Date Qty. per code Item begin end Part number part name model/kit 1 E End cap, axial ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E ( ) Plug assembly 1 E08A ( ) O-ring 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E32A ( ) O-ring 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 B520L586 Rev AA January
12 E32 e26a E27 e32a E26 E29 E30 E08 e08a E01 e04 E03 e33a E33 e17a E17 E10 E09 E07 E06 E15 e11a E16 E11 e06a E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
13 end cap Order date Date Qty. per code Item begin end Part number part name model/kit 5 E End cap, axial ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E ( ) Plug assembly 1 E08A ( ) O-ring 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E32A ( ) O-ring 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 B520L586 Rev AA January
14 E32 e26a E27 e32a E26 E29 E30 E08 e08a E01 e04 E03 e33a E33 e17a E17 E10 E09 E07 E06 E15 e11a E16 E11 e06a e26a E27 E26 E29 E01 e04 E03 E30 e33a E33 E15 e11a e17a E17 E16 E11 E10 E09 e06a E07 E06 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
15 end cap Order date Date Qty. per code Item begin end Part number part name model/kit 8 E End cap, axial ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E ( ) Plug assembly 1 E08A ( ) O-ring 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E32A ( ) O-ring 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 9 E End cap, radial ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 B520L586 Rev AA January
16 e26a E27 E26 E29 E30 (D) E01 e04 E03 e33a E33 E15 e11a e17a E17 E16 E11 E10 E09 e06a E07 E06 (E) E32 e32a E08 e08a E03 E30 e05a E01 e04 E05 (F) E32 E30 e32a E08 e08a E03 E01 e04 e35a E35 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
17 end cap Order date Date Qty. per code Item begin end Part number part name model/kit D E End cap, twin ports w/loop flushing, auxilary drive 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 E E End cap, radial ports 1 E Screw 4 E Needle bearing 1 E ( ) Plug assembly 1 E05A ( ) O-ring 1 E ( ) Plug assembly 1 E08A ( ) O-ring 1 E Lifting bracket 1 E ( ) Plug assembly 1 E32A ( ) O-ring 1 F E End cap, radial ports 1 E Screw 4 E Needle bearing 1 E ( ) Plug assembly 1 E08A ( ) O-ring 1 E Lifting bracket 1 E ( ) Plug assembly 1 E32A ( ) O-ring 1 E ( ) Plug assembly 1 E35A ( ) O-ring 1 B520L586 Rev AA January
18 (G) E03 E30 e05a E01 e04 E05 (H) e26a E27 E03 E26 E29 E30 e33a E33 e17a E17 E01 e04 e10 E09 E07 E06 E16 e06a E15 e11a E11 E E Enlarged bold type item numbers are recomended parts to stock for servicing L586 Rev AA January 2008
19 end cap Order date Date Qty. per code Item begin end Part number part name model/kit G E End cap, twin ports 1 E Screw 4 E Needle bearing 1 E ( ) Plug assembly 1 E05A ( ) O-ring 1 E Lifting bracket 1 H E End cap, twin ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 B520L586 Rev AA January
20 (J and M) e26a E27 E03 E26 E29 E30 e33a E33 e17a E17 E01 e04 e10 E09 E07 E06 E16 e06a E15 e11a E11 E E Enlarged bold type item numbers are recomended parts to stock for servicing L586 Rev AA January 2008
21 end cap Order date Date Qty. per code Item begin end Part number part name model/kit J E End cap, twin ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 M E End cap, twin ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Spool 1 E plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 B520L586 Rev AA January
22 E32 (U) e32a E08 e08a e04 E03 E30 e05a E01 E05 (W) E32 e26a E27 e32a E26 E29 E30 E08 e08a E01 e04 E03 e33a E33 e17a E17 E10 E09 E07 E06 E15 e11a E16 E11 e06a E E Enlarged bold type item numbers are recomended parts to stock for servicing L586 Rev AA January 2008
23 end cap Order date Date Qty. per code Item begin end Part number part name model/kit U E End cap, axial ports 1 E Screw 4 E Needle bearing 1 E ( ) Plug assembly 1 E05A ( ) O-ring 1 E ( ) Plug assembly 1 E08A ( ) O-ring 1 E Lifting bracket 1 E ( ) Plug assembly 1 E32A ( ) O-ring 1 W E End cap, axial ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring 1 E ( ) Plug assembly 1 E08A ( ) O-ring 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E32A ( ) O-ring 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 B520L586 Rev AA January
24 (Y) e26a E27 E03 E26 E29 E30 e33a E33 e17a E17 E01 e04 e10 E09 E07 E06 E16 e06a E15 e11a E11 (Z) E26 e26a E27 E03 E29 E30 e17a E17 E15 e04 E01 E10 E07 e17a E17 E09 e06a E16 E06 e11a E11 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
25 end cap Order date Date Qty. per code Item begin end Part number part name model/kit Y E End cap, twin ports w/loop flushing 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 Z E End cap, twin ports w/loop flushing, auxiliary drive 1 E Screw 4 E Needle bearing 1 E Plug assembly 1 E06A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Spool 1 E Plug assembly 1 E11A ( ) O-ring 1 E Spring 1 E Poppet 1 E ( ) Plug assembly 1 E17A ( ) O-ring 1 E Plug assembly 1 E26A ( ) O-ring 1 E Spring (SB ) 1 E Spring guide 1 E Lifting bracket 1 E ( ) Plug assembly 1 E33A ( ) O-ring 1 B520L586 Rev AA January
26 (A and G) B24 B36 b31 B54 b29 B30 b32 B28 B27 B26 B25 f01 (C) B36 b31 B54 b29 B30 b32 B28 B27 B26 B25 f01 E E Enlarged bold type item numbers are recomended parts to stock for servicing L586 Rev AA January 2008
27 Cylinder block kit Order date Date Qty. per code Item begin end Part number part name model/kit A F Cylinder block kit 1 B Cylinder block 1 B Washer 1 B Spring 1 B Washer 1 B Retaining ring 1 B Holddown pin 4 B Holddown pin retainer 1 B Slipper retainer guide 1 B Piston assembly 9 B Slipper retainer 1 B Thrust washer 1 C F Cylinder block kit, w/magnetic speed ring 1 B Washer 1 B Spring 1 B Washer 1 B Retaining ring 1 B Holddown pin 4 B Holddown pin retainer 1 B Slipper retainer guide 1 B Piston assembly 9 B Slipper retainer 1 B Thrust washer 1 G F Cylinder block kit, 97% balance 1 B Cylinder block 1 B Washer 1 B Spring 1 B Washer 1 B Retaining ring 1 B Holddown pin 4 B Holddown pin retainer 1 B Slipper retainer guide 1 B Piston assembly 9 B Slipper retainer 1 B Thrust washer 1 B520L586 Rev AA January
28 (B AND E) (D, F, G, K, N, T, and U) G01 G01 G02 G02a G02 G02a G03a G03 E E Enlarged bold type item numbers are recomended parts to stock for servicing L586 Rev AA January 2008
29 housing Order date Date Qty. per code Item begin end Part number part name model/kit B G Fixed motor housing 1 D G Fixed motor housing w/speed sensor port 1 G Adapter assembly 1 G02A ( ) O-ring 1 G KPPG13408 Speed sensor 1 G03A ( ) O-ring 1 E G Fixed motor housing, special 1 F G Fixed motor housing w/speed sensor port 1 G Adapter assembly 1 G02A ( ) O-ring 1 G KPPG156 Speed sensor 1 G03A ( ) O-ring 1 G G Fixed motor housing w/speed sensor port 1 G Plug assembly 1 G02A ( ) O-ring 1 K G Fixed motor housing w/speed sensor port 1 G Adapter assembly 1 G02A ( ) O-ring 1 G KPPG16511 Speed sensor 1 G03A ( ) O-ring 1 N G Fixed motor housing w/speed sensor port 1 G Adapter assembly 1 G02A ( ) O-ring 1 G KPPG16008 Speed sensor 1 G03A ( ) O-ring 1 T G Fixed motor housing w/speed sensor port 1 G Adapter assembly 1 G02A ( ) O-ring 1 G KPPG16708 Speed sensor 1 G03A ( ) O-ring 1 U G Fixed motor housing, 33/41cc 1 G Plug assembly 1 G02A ( ) O-ring 1 B520L586 Rev AA January
30 t03 t04 B51 b51a B40 B40 b45a B45 b21 t01 T02 b37 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
31 common parts Order date Date Qty. per code Item begin end Part number part name model/kit B Thrust plate 1 B End cap gasket 1 B Spring pin 2 B ( ) Plug assembly 1 B45A ( ) O-ring 1 B ( ) Plug assembly 1 B51A ( ) O-ring 1 T Motor valve plate (SB ) 1 T Slotted pin 1 special hardware NBC T Retaining ring 1 T ( ) Ball bearing 1 NBJ T Retaining ring 1 T ( ) Ball bearing 1 NBK T Retaining ring 1 T ( ) Ball bearing 1 NDD T Retaining ring 1 T ( ) Ball bearing 1 NGA T Retaining ring 1 T ( ) Ball bearing 1 NNG T Retaining ring 1 T Roller bearing (SB ) 1 NNN T Retaining ring 1 T ( ) Ball bearing 1 NNP T Retaining ring 1 T Roller bearing 1 NNR T Retaining ring 1 T Roller bearing (SB ) 1 NNS T Retaining ring 1 T Roller bearing (SB ) 1 NNW T Retaining ring 1 T ( ) Roller bearing 1 NNY T Retaining ring 1 T Roller bearing (SB ) 1 NRB T Retaining ring 1 T Roller bearing (SB ) 1 B520L586 Rev AA January
32 t03 t04 B51 b51a B40 B40 b45a B45 b21 t01 T02 b37 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
33 common parts Order date Date Qty. per code Item begin end Part number part name model/kit B Thrust plate 1 B End cap gasket 1 B Spring pin 2 B ( ) Plug assembly 1 B45A ( ) O-ring 1 B ( ) Plug assembly 1 B51A ( ) O-ring 1 T Motor valve plate (SB ) 1 T Slotted pin 1 special hardware NYJ T Retaining ring 1 T ( ) Roller bearing 1 XXX T Retaining ring 1 T ( ) Roller bearing 1 B520L586 Rev AA January
34 overhaul Seal kit Order date Date Qty. per code Item begin end Part number part name model/kit Overhaul seal kit, MMF035/44D 1 B End cap gasket 1 B45A ( ) O-ring,.755 x.097, nitrile, 90D 1 B51A ( ) O-ring,.755 x.097, nitrile, 90D 1 C Lip seal (SB ) 1 C Lip seal 1 C ( ) Lip seal 1 E05A ( ) O-ring,.755 x.097, nitrile, 90D 1 E06A ( ) O-ring,.468 x.078, nitrile, 90D 1 E08A ( ) O-ring,.9.24 x.116, nitrile, 90D 1 E11A ( ) O-ring,.414 x.072, nitrile, 90D 1 E17A ( ) O-ring,.351 x.072, nitrile, 90D 1 E26A ( ) O-ring,.468 x.078, nitrile, 90D 1 E32A ( ) O-ring,.9.24 x.116, nitrile, 90D 1 E33A ( ) O-ring,.351 x.072, nitrile, 90D 1 G02A ( ) O-ring,.755 x.097, nitrile, 90D 1 G03A ( ) O-ring,.468 x.078, nitrile, 90D L586 Rev AA January 2008
35 Variable displacement motor M M V D A A D L R N N N product special hardware frame size housing/end cap type control features seal group minimum displacement output shaft P E B520L586 Rev AA January
36 Variable displacement motor C02 d04 d05 c01 C03 d01 d01 Swashplate shown controlled on right. d04 E01 E02 e03 e04 C07 c06 C05 c04 C05 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
37 Variable displacement motor input shaft seal Order date Date Qty. per code Item begin end Part number part name model/kit A C Lip seal (SB ) 1 C Support washer 1 C Retaining ring 1 C Retaining ring 1 C O-ring 1 C End cap plug 1 B C Lip seal (SB ) 1 C Support washer 1 C Retaining ring 1 C Lip seal 1 C Retaining ring 1 C C Lip seal 1 C Retaining ring 1 input shaft A D Shaft, 13-tooth spline 1 D Retaining ring 1 D Retaining ring 1 T D Shaft, 18-tooth spline helical, 13-tooth auxiliary 1 D Retaining ring 1 swashplate/minimum displacement D E Swashplate 1 E Swashplate stop, set at 6 1 E ( ) Seal nut, M12 1 E Plastic cap 1 U E Swashplate, 9.5 stop 1 Control features L Swashplate control shaft on left side R Swashplate control shaft on right side B520L586 Rev AA January
38 Variable displacement motor (1 AND X) G01 G08a G09 G08 G10 G07 G04 G06 G12 G11 G10 G08a G09 G08 (3) G01 G07 G04 G06 (R AND W) G01 G07 G06 G27a G27 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing G05a G05 G L586 Rev AA January 2008
39 Variable displacement motor housing/end cap Order date Date Qty. per code Item begin end Part number part name model/kit 1 G Variable motor housing 1 G End cap 1 G Screw 4 G Needle bearing 1 G Plug 2 G08A O-ring 2 G Spring 2 G Spring guide 2 G Spool 1 G Orifice plug 1 3 G Variable motor housing 1 G End cap 1 G Screw 4 G Needle bearing 1 R G Variable motor housing 1 G End cap 1 G ( ) Plug assembly 1 G05A ( ) O-ring 1 G Screw 4 G Needle bearing 1 G ( ) Plug assembly 1 G27A ( ) O-ring 1 W G Variable motor housing 1 G End cap 1 G ( ) Plug assembly 1 G05A ( ) O-ring 1 G Screw 4 G Needle bearing 1 G ( ) Plug assembly 1 G27A ( ) O-ring 1 X G Variable motor housing 1 G End cap 1 G Screw 4 G Needle bearing 1 G Plug 2 G08A O-ring 2 G Spring 2 G Spring guide 2 G Spool 1 G Orifice plug 1 B520L586 Rev AA January
40 Variable displacement motor F03 F01 f04 F05 B45 b45a t04 T03 n02 B40 B19 b15 B16 B40 b51a B51 b21 B18 b32 B36 B31 B30 B29 B54 t01 B27 B28 B26 B25 B22 T02 B37 E E Enlarged bold type item numbers are recomended parts to be stocked for servicing L586 Rev AA January 2008
41 Variable displacement motor common parts Order date Date Qty. per code Item begin end Part number part name model/kit B O-ring 1 B Trunnion cover 1 B ( ) Screw 4 B Bearing kit 1 B Thrust plate 1 B Cylinder block kit 1 B Cylinder block 1 B Washer 1 B Spring 1 B Washer 1 B Retaining ring 1 B Holddown pin 4 B Holddown pin retainer 1 B Slipper retainer guide 1 B Piston assembly 9 B Slipper retainer 1 B End cap gasket 1 B Pin (SB ) 2 B ( ) Plug assembly 1 B45A ( ) O-ring 1 B ( ) Plug assembly 1 B51A ( ) O-ring 1 B Thrust washer 1 F Trunnion cover assembly 1 F ( ) Screw 4 F O-ring 1 F Bearing kit 1 N Lip seal (SB ) 1 T Valve plate (SB ) 1 T Slotted pin 1 special hardware NNN T Retaining ring 1 T ( ) Ball bearing 1 NNP T Retaining ring 1 T Roller bearing 1 NNR T Retaining ring 1 T Roller bearing (SB ) 1 B520L586 Rev AA January
42 Variable displacement motor overhaul Seal kit Order date Date Qty. per code Item begin end Part number part name model/kit Overhaul seal kit, MMV035/44D 1 B O-ring, x.099, nitrile, 70D 1 B End cap gasket 1 B45A ( ) O-ring,.9.24 x.116, nitrile, 90D 1 B51A ( ) O-ring,.9.24 x.116, nitrile, 90D 1 C Lip seal (SB ) 1 C Lip seal 1 C O-ring, x.070, nitrile, 70D 1 E ( ) Seal nut, M12 1 F O-ring, x.099, nitrile, 70D 1 G05A ( ) O-ring,.468 x.078, nitrile, 90D 1 G08A ( ) O-ring,.468 x.078, nitrile, 90D 2 G27A ( ) O-ring,.468 x.078, nitrile, 90D 1 N Lip seal (SB ) L586 Rev AA January 2008
43 Service Bulletin: SB products affected subject description Series 40: M35 and M44 motors Shaft bearing in high capacity special hardware option As a product improvement, Sauer-Danfoss changed the roller bearing Series 40: M35 and M44 motors equipped with the high capacity special hardware option. This change allows for motors equipped with this option to withstand a greater thrust load. The new bearing is interchangeable with the old bearing. Bearing models affected M35 motors M44 motors serial numbers This change became effective at serial number A xxxxx. part numbers affected Item description Old part number New part number Roller bearing parts disposition Interchangeable B520L586 Rev AA January
44 Service Bulletin: SB products affected subject description Series 40: M35 and M44 variable motors, variable pumps, and tandem pumps Housing to end cap dowel pin change Sauer-Danfoss introduced a design improvement to the dowel pins that align the variable housing and end cap for the Series 40: M35 and M44 variable motors, variable pumps, and tandem variable pumps. Each variable motor and variable pump assembly uses two dowel pins to align the end cap to the pump housing. The assembly is designed so the dowel pin is installed in the variable housing before the end cap is positioned on the assembly. The tandem variable pump uses the same dowel pin to align the two halves of the tandem pump assembly. Previously, a slip fit existed between the holes in the variable housing and the pin. The design of the dowel pin changed to incorporate a knurled section on the pin. The fit between the dowel pin and the pilot hole in the variable housing changed to a slight interference fit. This change improves the serviceability of the motor and pump assembly, by reducing the potential for the pins to dislodge from the housing when servicing the product. To help indentify this change, we have a new dowel pin part number. The new pin is completely interchangeable with the old pin. The old pin remains available as a service item, since it is in a variety of Sauer-Danfoss applications. models affected serial numbers part numbers affected parts disposition M35-4xxx, 4354xxx and 4444xxx variable displacement motors M35-2xxx, 4352xxx and 4442xxx variable displacement pumps M91-35xxx, 4355xxx and 4445xxx tandem pumps This change became effective at serieal number A xxxxx Old dowel pin New dowel pin Interchangeable Use parts in stock L586 Rev AA January 2008
45 Service Bulletin: SB products affected subject description Series 40: M25 fixed and U-style, M35, M44, and M46 fixed and variable motors Valve plate change As a product improvement, Sauer-Danfoss modified the finish on Series 40 motor valve plates. This change improves the plate s ability to develop and retain a suitable oil film, especially at initial start-up. New part numbers for all Series 40 motor valve plates identify this change. This is an interchangeable change. The old part numbers are obsolete. They are no longer available as a service part. models affected Series 40: M25 fixed motors and M25 motor sections within M25 U-style transmissions Series 40: M35 and M44 fixed motors Series 40: M46 fixed and variable motors serial numbers This change became effective at serial number A xxxxx for all Series 40 M25 fixed motors and M25 motor sections of U-style transmissions. This change became effective at serial number K xxxxx for all Series 40 M35 and M44 fixed motors and all M46 fixed and variable motors part numbers affected Frame size Item description Old part number New part number M25 Motor valve plate M35 and M44 Square key M46 Motor valve plate parts disposition Interchangeable B520L586 Rev AA January
46 Service Bulletin: SB A products affected subject description Series 40: M25, M35, and M44 pumps and variable motors Trunnion seal change As a product improvement, Sauer-Danfoss made a design change to the trunnion seal on Series 40: M25, M35, and M44 pumps and variable motors. The dust lip is extended, allowing more installation concentricity tolerence, and more forgiving during installation. Now there will be fewer low-hour trunnion seal failures caused by improper installation. The new seal is interchangeable with the old seal. Sauer-Danfoss recommends that the seal be replaced when servicing these units. The old seal ( ) remians available as it is in other Sauer-Danfoss product lines. Trunnion lip seal models affected Series 40: M25, M35 and M44 pumps and variable motors serial numbers This change became effective at serial number K xxxxx part numbers affected Item description Old part number New part number Trunnion seal parts disposition Interchangeable L586 Rev AA January 2008
47 Service Bulletin: SB products affected subject description Series 40: M25, M35, M44, M46, and LV pumps and motors Change from woodruff key to straight key on tapered shaft Sauer-Danfoss uses a straight key rather than a woodruff key in tapered shafts on all Series 40 pumps and motors. Tapered shafts requiring a woodruff key are obsolete. The woodruff key, however, remains available for service requirements. Customers requiring a replacement shaft need the straight key. Woodruff key Straight key models affected Series 40: M25, M35, M44, M46, and LV pumps and motors using tapered shafts serial numbers This change will become effective during the 2002 build year. part numbers affected Old part number New part number description Key-woodruff,.248 x Key-square,.250 x Shaft, tapered Shaft, tapered Shaft, tapered Shaft, tapered Shaft, tapered/9t. aux Shaft, tapered/13t. aux Shaft, tapered Shaft, 13-tooth/tapered aux Shaft, tapered parts disposition Interchangeable if shaft and key are both replaced Use parts in stock Scrap new parts and apply for credit B520L586 Rev AA January
48 Service Bulletin: SB products affected subject description M35 and M44 pumps and variable motors Shaft seal change As a product improvement, Sauer-Danfoss has improved the design of the shaft lip seal. The new seal is a single piece design instead of a crimped two-piece design. Shaft lip seal models affected M35, and M44 pumps and variable motors serial numbers This change became effective at serial number K xxxxx. part numbers affected Item description Old part number New part number Lip seal parts disposition Interchangeable L586 Rev AA January 2008
49 Service Bulletin: SB products affected subject description Series 40 fixed motors with loop flushing option (M25, M35, M44) Loop flush return spring. As a product improvement aimed at reducing assembly risk and increasing quality, Sauer-Danfoss is making the following change to series 40 fixed motors with loop flushing option (M25, M35, M44): Spring-helical compression (Old P/N ) will change to spring-helical compression (New P/N ). This change will be visually detectible as that the ends of the new spring will be tapered smaller allowing it to snap onto the spring guide (P/N ) holding the two parts together. All parts are completely interchangeable in fit and function. From: To: models affected All series 40 fixed motors with loop flushing option (M25, M35, M44) serial numbers Change will go into effect starting: K XXXXX part numbers affected Old part number New part number Description Spring parts disposition Interchangeable B520L586 Rev AA January
50 Service Bulletin: SB products affected subject description Series 40 M35 M44 fixed motors Shaft seal As a product improvement, Sauer-Danfoss has changed the shaft seal used in the series 40 M35 and M44 fixed motors. The new shaft seal and old shaft seal are completely interchangeable. The old shaft seal is obsolete and no longer available for service. models affected Series 40 M35 and M44 fixed motors using tapered shafts serial numbers This change will become effective at serial number A xxxxx part numbers affected Description Old part number New part number Seal parts disposition Interchangeable L586 Rev AA January 2008
51 Notes B520L586 Rev AA January
52 OUR PRODUCTS Hydrostatic transmissions Hydraulic power steering Electric power steering Electrohydraulic power steering Closed and open circuit axial piston pumps and motors Gear pumps and motors Bent axis motors Orbital motors Transit mixer drives Proportional valves Directional spool valves Cartridge valves Hydraulic integrated circuits Hydrostatic transaxles Integrated systems Fan drive systems Electrohydraulics Microcontrollers and software Electric motors and inverters Joysticks and control handles Displays Sensors Sauer-Danfoss Mobile Power and Control Systems Market Leaders Worldwide Sauer-Danfoss is a comprehensive supplier providing complete systems to the global mobile market. Sauer-Danfoss serves markets such as agriculture, construction, road building, material handling, municipal, forestry, turf care, and many others. We offer our customers optimum solutions for their needs and develop new products and systems in close cooperation and partner ship with them. Sauer-Danfoss specializes in integrating a full range of system components to provide vehicle designers with the most advanced total system design. Sauer-Danfoss provides comprehensive worldwide service for its products through an extensive network of Global Service Partners strategically located in all parts of the world. Local address: Sauer-Danfoss (US) Company 2800 East 13th Street Ames, IA 50010, USA Phone: Fax: Sauer-Danfoss ApS DK-6430 Nordborg, Denmark Phone: Fax: Sauer-Danfoss GmbH & Co. OHG Postfach 2460, D Neumünster Krokamp 35, D Neumünster, Germany Phone: Fax: Sauer-Danfoss-Daikin LTD Sannomiya Grand Bldg. 8F Isogami-dori, Chuo-ku Kobe, Hyogo , Japan Phone: Fax: L586 Rev AA January 2008
Series 40 MMF035D and MMV035D Axial Piston Motors. Parts Manual
Series 40 MMF035D and MMV035D Axial Piston Motors 2003, 2008 Sauer-Danfoss. All rights reserved. 2 520L0602 Rev AA January 2008 Sauer-Danfoss accepts no responsibility for possible errors in catalogs,
More informationParts Manual Axial Piston Motors Series 40 MMF044D and MMV044D powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Parts Manual Axial Piston Motors Series 40 MMF044D and MMV044D powersolutions.danfoss.com Front cover illustrations: P100 606 2 520L0586 Rev BB Nov 2013 Contents General Information
More informationSeries cc Axial Piston Motor. Parts Manual
Series 90 130 cc Axial Piston Motor 2007 Sauer-Danfoss. All rights reserved. Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material. Sauer-Danfoss
More informationSeries 40 M25 Axial Piston Pump. Service Parts Manual
Series 40 M25 Axial Piston Pump Service Parts Manual 1996, 2004 Sauer-Danfoss. All rights reserved. Printed in U.S.A. Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures
More informationSeries 40 MMF035D and MMV035D Axial Piston Motors
Series 40 MMF035D and MMV035D Axial Piston Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev March 2018 Added shaft option B 0303 March 2018 Corrected cover image 0302
More informationSeries cc Axial Piston Motor. Parts Manual
Series 90 100 cc Axial Piston Motor 2007 Sauer-Danfoss. All rights reserved. Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed material. Sauer-Danfoss
More informationService Parts Manual M25 Axial Piston Motor Series 40 powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Service Parts Manual M25 Axial Piston Motor Series 40 powersolutions.danfoss.com 2 Contents General Information Service parts identification... 4 Nameplate... 4 Date code...
More informationParts Manual Series cc Axial Piston Motor powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Parts Manual Series 90 130 cc Axial Piston Motor powersolutions.danfoss.com 2 Contents General information Service parts identification...4 Nameplate...4 Date code...5 Service
More informationParts Manual Closed Circuit Axial Piston Pump DDC20 powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Parts Manual Closed Circuit Axial Piston Pump DDC20 powersolutions.danfoss.com 2 Contents General Information Variable pump & fixed motor Service parts identification...4
More informationDirectional Control Valve Model Technical Information. Phased Out OUT BASE BKT CYL ROD
BASE BKT CYL ROD OUT IN Directional Control Valve Model 1480 Technical Information History of Revisions Revisions Table of Revisions Date Page Changed Rev. May 2008 - first edition AA 2008 Sauer-Danfoss.
More informationClosed Circuit Axial Piston Pump DDC20
Parts Manual Closed Circuit Axial Piston Pump powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev July 2017 Updated to Engineering Tomorrow design 0302 2 Danfoss July 2017 AX00000134en-US0302
More informationGenuine Parts Original Ersatzteile. Series cc - Axial Piston Pump Service Parts Manual
250 cc - Axial Piston Pump Service Parts Manual sauecontents Genuine Parts Unit and Service Parts Identification... 3-4 Order Code... 5 Housing... 6-7 Swashplate... 6-7 Displacement Limitation... 8-9 End
More informationClosed Circuit Axial Piston Pumps H1 115/130 cc
MAKING MODERN LIVING POSSIBLE Conversion Manual Closed Circuit Axial Piston Pumps H1 115/130 cc powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev December 2015 First edition
More informationService Parts Manual Axial Piston Pumps and Motors Series 18 powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Service Parts Manual Axial Piston Pumps and Motors Series 18 powersolutions.danfoss.com Front cover illustration: P100 649 2 BLN-2-41635 520L0664 Rev BA Feb 2014 Contents
More informationDirectional Control Valve
Directional Control Valve Service and Parts Manual powersolutions.danfoss.com Directional Control Valves Service and Parts Manual: Contents SERVICE PARTS Inlet cover... 3-4 Outlet cover... 5-6 Standard
More informationSeries cc Axial Piston Pump. Parts Manual M72 M71 M90 M70 *M27 *M26 *M11
Series 90 250 cc Axial Piston Pump M72 M90 M71 M70 *M27 *M26 *M11 2012 Sauer-Danfoss. All rights reserved. Sauer-Danfoss accepts no responsibility for possible errors in catalogs, brochures and other printed
More informationOMEW Standard and with Low Speed Option. Orbital Motors. Technical Information
Standard and with Low Speed Option Orbital Motors Technical Information Contents Revision History Table of Revisions Date Page Changed Rev Jan 2009 Many major change BA Mar 2010 16 Japan location BB Contents
More informationQuick Reference Parts Manual Variable Displacement Motor Series 20, series powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Quick Reference Parts Manual Variable Displacement Motor Series 20, 20-27 series powersolutions.danfoss.com 2 Contents Service parts Exploded view drawing (20 thru 23 series)...4
More informationHydrostatic Steering Unit Type OSPB, OSPC and OSPF. Service Manual
Hydrostatic Steering Unit Type OSPB, OSPC and OSPF Table of Contens Revision History Table of Revisions Date Page Changed Rev Dec 2008 26 Tightening torque changed BC Table of contens... 2 Exploded view
More informationOMR Technical Information Versions
Versions Versions Mounting flange Spigot diam,eter (front /rear end) Bolt circle diameter (BC) Shaft Port size European version US version Side port version End port version Flange port version Standard
More informationMobile solutions for aerial lifts
Mobile solutions for aerial lifts The Sauer-Danfoss system development phase model: inquiry Project specification Concept phase Detailed project plan Technical system specifications Different system proposals
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationOrbital Motors Type OMP, OMR and OMH. Technical Information
Orbital Motors Type OMP, OMR and OMH Technical Information OMP, OMR and OMH A Wide Range of Hydraulics Motors F 301 245 A Wide Range of Hydraulic Motors Sauer-Danfoss is a world leader within production
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationSeries 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
More informationSeries 20 Axial Piston Motors. Technical Information
Series 20 xial Piston Motors Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston motors. DESCRIPTION Sauer-Danfoss
More informationFaster. Count on availability when you need it most H1B Bent Axis Motors Rapid Delivery Center. time to market. powersolutions.danfoss.
Count on availability when you need it most H1B Bent Axis Motors Rapid Delivery Center Faster time to market Danfoss RDCs ensure you have the product you want, when you want it powersolutions.danfoss.com
More informationPVG 120 Proportional Valves. Specifications
PVG 120 Proportional Valves s Ordering guidance and remote control units ORDERING GUIDANCE The module selection chart and the order form are both divided into fields. Each module has its own field: 0:
More informationOMH. Repair Instructions
OMH Table of Contents Revision View Date Page Changed Revision Jun 2006 New AA Apr 200 6 Japan location AB Sep 200 6 New back cover AC Safety Precautions Always consider safety precautions before beginning
More informationPOWER SYSTEM MODE STATUS
SX NFPE Control System System Description 4, 60,2 8, 8, 0 9 0 2, 0, AMP Stecker AMP Connector 4 28 29 42 Overview DESCRIPTION The Sauer-Danfoss NFPE (Non-Feedback Proportional Electric) System for Automotive
More informationPOWER SYSTEM MODE STATUS
SX Generic Anti Spin Valve Control System System Description 7,7 POWER SYSTEM MODE STATUS 60, 8, 8, 0 9 0, 0, AMP Stecker AMP Connector 8 9 SX Generic Anti Spin Valve Control System Overview DESCRIPTION
More informationTechnical Information Series 45 G Frame powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Series 45 G Frame powersolutions.danfoss.com Contents Frame G Design... 4 Specifications... 5 Performance G74B... 6 Performance G9C... 7 Order code...
More informationSteering Priority Valve OLS 160
MAKING MODERN LIVING POSSIBLE Service Manual Steering Priority Valve OLS 160 powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Mar 2014 Converted to Danfoss layout - DITA
More informationOMR, OMR C, and OMRW N Series 5 and 6. Repair Instructions
, C, and W N Series and Orbital Motors, C and W N Series and Table of Contents Revision View Safety Precautions Date Page Changed Revision 29 Jun, 200 all Changed from Danfoss to Sauer Danfoss lay out
More informationMCX106A Hall Effect Level Sensor. Technical Information
MCX106A Hall Effect Level Sensor Technical Information Revisions Revision History Table of Revisions Date Page Changed Rev 21 Jan, 2011 Initial release AA 2011 Sauer-Danfoss. All rights reserved. 2 Sauer-Danfoss
More informationSeries 20 Axial Piston Motors. Technical Information
Series 20 xial Piston Motors Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston motors. DESCRIPTION Sauer-Danfoss
More informationOMP, OMP C, OMPW, and OMPW N Series 7 and 8. Repair Instructions
, C, W, and W N Series and 8 Orbital Motors, C, and W/N Series and 8 Table of Contents Revision View Safety Precautions Date Page Changed Revision 29 Jun, 200 all Changed from Danfoss to Sauer Danfoss
More informationH1 Pump Filter Bypass Sensor
MAKING MODERN LIVING POSSIBLE Electrical Installation H1 Pump Filter Bypass Sensor powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev September 2015 Minor layout revision BC
More informationOML and OMM Orbital motors. Technical Information
OML and OMM Orbital motors Technical Information OML and OMM A wide range of orbital motors F300030.TIF A WIDE RANGE OF ORBITAL MOTORS Sauer-Danfoss is a world leader within production of low speed orbital
More informationS5X Shift On The Go (SOTG) Control System. System Description 223,5 82,25 77,75 8,5 8,5 164,5 10,3. AMP Stecker AMP Connector 52,5 POWER SYSTEM MODE
SX Shift On The Go (SOTG) Control System System escription 47, POWER SYSTEM 8, 77,7 8, MOE STTUS 8, 0 0 64, 0, MP Stecker MP Connector 4 6 8 4 8, SX Shift On The Go (SOTG) Control System Overview ESCRIPTION
More informationOMT Series 2. Orbital Motors. Service Manual
OMT Series 2 Orbital Motors Table of Contens, Special Versions Revision History Table of Revisions Date Page Changed Rev Sept 2003 CA Feb 200 4-5 Drain plug updated, Layout adjusted CB Sep 200 6 New back
More informationOML and OMM Orbital Motors. Repair Instructions
OML and OMM Orbital Motors Table of Contents, Revision View and Safety Precautions Revision View Date Page Changed Revision Jan 2008 all Changed from Danfoss to Sauer Danfoss lay out AA Mar 2008 13 Service
More informationOrbital Motors Seal Kits
Technical Information Orbital Motors Seal Kits powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev October 2017 Added OMP X and OMR X data to table and updated to Engineering
More informationH1B Motor Two-Position Control E1, E2
MAKING MODERN LIVING POSSIBLE Electrical Installation H1B Motor Two-Position Control E1, E2 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev July 2015 Converted to Danfoss
More informationSeries 51 Motor Electrohydraulic Two-Position Controls T1, T2
MAKING MODERN LIVING POSSIBLE Electrical Installation Series 51 Motor Electrohydraulic Two-Position Controls T1, T2 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev August
More informationSensor Steering Angle Sensor Absolute (SASA)
MAKING MODERN LIVING POSSIBLE Electrical Installation Sensor (SASA) powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev September 2015 Minor layout revision BB April 2014 Converted
More information60+ countries served by our global manufacturing facilities ensures market proximity
Power and control for all your work function needs Series 45 Open Circuit Axial Piston Pumps 60+ countries served by our global manufacturing facilities ensures market proximity powersolutions.danfoss.com
More informationMAKING MODERN LIVING POSSIBLE. Service Manual. Steering OSPM. powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Service Manual Steering OSPM powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Mar 2014 Converted to Danfoss layout - DITA CMS BA Feb 1998 First
More informationMAKING MODERN LIVING POSSIBLE. Technical Information. Orbital Motors TMVW. powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Orbital Motors TMVW powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev September 2015 New curve for permissible shaft load 0201 November 2014
More informationPVG 120 Proportional Valves. Service Parts Manual
PVG 120 Proportional Valves Service Parts Manual Contents and Data Survey CONTENTS AND DATA SURVEY Page Sectional drawing... 3 Identification...4 Installation PVG... 5 Spare parts... 22 Pos. 1: PVP, pump
More informationS1X Generic Speed Control System
MAKING MODERN LIVING POSSIBLE System Description S1X Generic Speed Control System powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev August 2015 Danfoss Layout 0600 September
More informationSteering Unit Type OSPB and OSPC Type ON and CN
MAKING MODERN LIVING POSSIBLE Service Manual Steering Unit Type OSPB and OSPC Type ON and CN powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Mar 2014 Converted to Danfoss
More informationH1B Motor Electric Two-Position Control T1, T2
MAKING MODERN LIVING POSSIBLE Electrical Installation H1B Motor Electric Two-Position Control T1, T2 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev June 2015 Converted
More informationSeries 51-1 Motor Pressured Compensated Controls TA
MAKING MODERN LIVING POSSIBLE Series 51-1 Motor Pressured Compensated Controls TA powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev August 2015 Converted to Danfoss layout
More informationDistribuíção, revenda emanutenção. CatálogosOnline. (11) (11)
Distribuíção, revenda emanutenção CatálogosOnline (11)4174-3300-(11)4765-6775 www.hmc.com.br MAKING MODERN LIVING POSSIBLE Technical Information Axial Piston Pumps Series 20 powersolutions.danfoss.com
More informationOSPB, OSPC, OSPR, OSPD Open Center Steering units OSPB Closed Center Steering units TAD Torque amplifiers. Technical Information
OSPB, OSPC, OSPR, OSPD Open Center Steering units OSPB Closed Center Steering units TAD Torque amplifiers Technical Information A wide range of steering components A WIDE RANGE OF STEERING COMPONENTS F300599
More informationDH Technical Information. Versions. Versions
Versions Versions Mounting flange Shaft Port size European version US version Side port version End port version Flange port version Standard shaft seal High pressure shaft seal Drain connection Check
More informationMCX104A DC Microsyn Level Sensor. Technical Information
MCX104A DC Microsyn Level Sensor Technical Information Revisions Revision History Table of Revisions Date Page Changed Rev 06 Apr 2011 4 Ordering Information BA 07 Dec 2010 Cover Added PLUS+1 Compliant
More informationOrbital Motors OMEW Standard and with Low Speed Option
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMEW Standard and with Low Speed Option powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev October 2014 Changed
More informationProportional Valve Group PVG 120
MAKING MODERN LIVING POSSIBLE Specification Proportional Valve Group PVG 120 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev May 2014 Converted to Danfoss layout DITA CMS
More informationSensors KS10201 Microsyn Level Sensor
MAKING MODERN LIVING POSSIBLE Technical Information Sensors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2015 Converted to Danfoss layout 0001 August 2010 Initial
More informationL and K Frame Variable Motors. Technical Information
L and K Frame Variable Motors Technical Information Revisions Revisions Table of Revisions Date Page Changed Rev. April 2008 6 corrected the schematic drawings BE January 2008 17 removed displacement limiter
More informationTechnical Information Orbital Motors DH and DS powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors DH and DS powersolutions.danfoss.com and DS F 301 245 A Wide Range of Orbital Motors Danfoss Power Solutions is a world leader within
More informationMAKING MODERN LIVING POSSIBLE. Phased Out Products. Technical Information. Level Controller. powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information ACW112A,D Level Controller powersolutions.danfoss.com 2 BLN-95-8952-11 95-8952-11 August 2004 PRODUCT OVERVIEW Description... 4 Features... 4 Ordering
More informationEfficient performance precise operation. PVG proportional valves
Efficient performance precise operation. PVG proportional valves Modular system design enables customization for your varying vehicle control needs powersolutions.danfoss.com Flexible, efficient, and global
More informationOrbital Motors DH and DS
MAKING MODERN LIVING POSSIBLE Orbital Motors DH and DS powersolutions.danfoss.com Orbital Motors, DH and DS F 301 245 A Wide Range of Orbital Motors Danfoss Power Solutions is a world leader within production
More informationProduct Reliability Data (MTTF) for S90P
MAKING MODERN LIVING POSSIBLE Functional Safety Product Reliability Data (MTTF) for S90P042-250 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev May 2015 Added Mission time
More informationTechnical Information Axial Piston Motors Series 20 powersolutions.danfoss.com
MKING MODERN LIVING POSSILE Technical Information xial Piston Motors Series 20 powersolutions.danfoss.com General Information Introduction Danfoss a world leader in hydraulic power systems has developed
More informationProportional Valve Group PVG 128/256
Service and Parts Manual Proportional Valve Group powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev July 207 First edition 00 2 Danfoss July 207 AX00000346en-US00 Contents
More informationOSPB, OSPC, OSPF, OSPD, OSPQ, OSPL Load Sensing Steering Units. OLS Priority Valves. OSQ Flow Amplifiers. Technical Information
OSPB, OSPC, OSPF, OSPD, OSPQ, OSPL Load Sensing Steering Units OLS Priority Valves OSQ Flow Amplifiers Technical Information A Wide Range of Steering Components Revision History Table of Revisions Date
More informationProduct Reliability Data (MTTF) for H1P
MAKING MODERN LIVING POSSIBLE Functional Safety Product Reliability Data (MTTF) for H1P069-250 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev May 2015 Added CCO information
More informationPhased Out Products. Proportional Valve Group PVG 83. Tech Note MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Tech Note Proportional Valve Group PVG 83 Valve system PVG 83 is a hydraulic load sensing valve designed to give the customer just the valve he needs. From a simple load sensing
More informationSteering Valve EHPS and EHPS with OLS 320
Service Manual Steering Valve EHPS and EHPS with OLS 320 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev July 2016 Updated EHPS spare parts list 0102 June 2015 First version
More informationOSPB, OSPC, OSPF, OSPD, OSPQ, OSPL Load Sensing Steering Units. OLS Priority Valves. OSQ Flow Amplifiers. Technical Information
OSPB, OSPC, OSPF, OSPD, OSPQ, OSPL Load Sensing Steering Units OLS Priority Valves OSQ Flow Amplifiers Technical Information A Wide Range of Steering Components Revision History Table of Revisions Date
More informationTechnical Information Series 45 H Frame powersolutions.danfoss.com
MAKING MODERN LIVING POILE Technical Information eries 45 H Frame powersolutions.danfoss.com Contents Frame H Design... 4 pecifications... 5 Performance H57... 6 Performance H75D... 7 Order code... 8 Controls...
More informationOSPB, OSPC, OSPF, OSPD, OSPQ, OSPL Load Sensing Steering Units. OLS Priority Valves. OSQ Flow Amplifiers. Technical Information
OSPB, OSPC, OSPF, OSPD, OSPQ, OSPL Load Sensing Steering Units OLS Priority Valves OSQ Flow Amplifiers Technical Information A Wide Range of Steering Components Revision History Table of Revisions Date
More informationHydraulic and Electronic Control Solutions Concrete Pump Truck
Hydraulic and Electronic Control Solutions Concrete Pump Truck Best Partner for a future of intelligence Quality products and systems indicate lower maintenance cost and longer service life. Our global
More informationOrbital X Modular Program
Service Manual Orbital X Modular Program www.danfoss.com Revision history Table of revisions Date Changed Rev May 2018 Updated document with new S-Spring tool and information 0201 Apr 2018 Removed S-Spring
More informationD Series Gear Motors Including Fan Drive. Technical Information
D Series Gear Motors Including Fan Drive Technical Information Revisions History of Revisions Table of Revisions Date Page Changed Rev. February 09 - First edition AA 09 Sauer-Danfoss. All rights reserved.
More informationSensors ACX104B Potentiometer Rotary Position Sensor
MKING MODERN LIVING POSSILE Technical Information Sensors CX104 Potentiometer Rotary Position Sensor powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2015 Conversion
More informationTransit Mixer Drives System Series TM
MAKING MODERN LIVING POSSIBLE System Description Transit Mixer Drives System Series TM powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Mar 2014 Converted to Danfoss layout
More informationTechnical Information. Steering Unit OSPU. powersolutions.danfoss.com
Technical Information Steering Unit OSPU powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev March 2016 Updated to Engineering Tomorrow design 0202 May 2014 Converted to Danfoss
More informationH1 Axial Piston Pump Size 147/165, Single. Technical Information
H1 Axial Piston Pump Size 147/165, Single Technical Information Revisions Revision History Table of revisions Date Page Changed Rev 30 Jul, 2009 First edition AA Jul, 2010 4-6, 10, 12-13 New EC directive
More informationMCH Customizing the Basic Control Handle
Installation Guide MCH powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev July 2017 Removed part numbers of obsolete product 0102 August 2016 Replaces BLN 95-9051 0101 2 Danfoss
More informationService Manual Steering unit OSPQ and OSPD powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Service Manual Steering unit OSPQ and OSPD powersolutions.danfoss.com Table of contents Exploded view OSPQ... 3 Tools... 4 Dismantling OSPQ... 5 Assembling OSPQ... 7 Exploded
More informationSeries ASC Anti Spin Control Valve
MAKING MODERN LIVING POSSIBLE Technical Information Series ASC Anti Spin Control Valve powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev March 2014 Converted to Danfoss layout
More informationMAKING MODERN LIVING POSSIBLE. Technical Information. Series DCM Cam Motor. powersolutions.danfoss.com
MAKING MODERN LIVING POSSIBLE Technical Information Series DCM Cam Motor powersolutions.danfoss.com Content Overview For safe use of hydraulic units... 3 Notes for cam usage... 4 Model code... 6 Technical
More informationSeries 51 - HZ, HA, HB, HE, HS, H1, H2, K1, K2, HP, HC, J1, J2, J3, J4, JA Hydraulic Proportional Controls
MAKING MODERN LIVING POSSIBLE Service Manual Series 51 - HZ, HA, HB, HE, HS, H1, H2, K1, K2, HP, HC, J1, J2, J3, J4, JA Hydraulic Proportional Controls powersolutions.danfoss.com Revision history Table
More informationClosed Circuit Axial Piston K and L Frame Variable Motors, SAE Mount
MAKING MODERN LIVING POSSIBLE Service Manual Closed Circuit Axial Piston K and L Frame Variable Motors, SAE Mount powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November
More informationSteering OSPB, OSPC, OSPD Open Center and OSPB Closed Center
echnical Information Steering OSB, OSC, OSD Open Center and OSB Closed Center powersolutions.danfoss.com evision history able of revisions Date Changed ev April 2016 Updated to Engineering omorrow design
More informationHeavy Duty Hydrostatic Transmissions
Heavy Duty Hydrostatic Transmissions Features and Benefits Typical Applications Construction Transit Mixer Road Roller Paver Motor Grader Loader Dozer Material Handling & Utility Crane Sweeper Lift Truck
More informationT1P Transit Mixer Axial Piston Pump Size 069/089
Technical Information T1P Transit Mixer Axial Piston Pump Size 069/089 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev May 2016 Updated to Engineering Tomorrow design. 0201
More informationLoop Flushing Valve. Lenntech. Technical Information. Tel Fax
MAKING MODERN LIVING POSSIBLE Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Revision history Table of revisions Date Change Rev Dec 2014 Danfoss Layout EA Oct 2011
More informationMCV106A. Hydraulic Displacment Control-PV DESCRIPTION FEATURES ORDERING INFORMATION. BLN Issued: March 1991
DESCRIPTION MCV106A Hydraulic Displacment Control-PV Issued: March 1991 The MCV106A Hydraulic Displacement Control (HDC) is a costeffective hydraulic pump stroke control which uses mechanical feedback
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2014 Converted
More informationEaton. Parts Information
Eaton Medium Duty Piston Pump No. 6-632 August, 1995 Parts Information Model 70142 / 70144, 20.3 cm 3 /r [1.24 in 3 /r] Displacement and 70145, 23.6 cm 3 /r [1.44 in 3 /r] Displacement Variable Displacement
More informationOrbital Motor EMD Speed Sensor
MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motor EMD Speed Sensor powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Feb 2014 Converted to Danfoss layout -
More informationAxial Piston Variable Motor Series 40 M46
MAKING MODERN LIVING POSSIBLE Service Manual Axial Piston Variable Motor Series 40 M46 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev August 2014 Danfoss Layout BA September
More informationEaton. Parts Information
Eaton Medium Duty Piston Pump No. 06-639 December 1998 Parts Information Model 70360 Variable Displacement Piston Pump 40,6 cm 3 /r [2.48 in 3 /r] or 49,2 cm 3 /r [3.00 in 3 /r] Displacements Manual Controlled
More informationPhased Out Products. Hydraulic motor with Drum Brake, OMSB. Spare parts MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Spare parts Hydraulic motor with Drum Brake, OMSB Cost-free repairs We would point out that cost-free repairs as mentioned in Danfoss General Conditions of Sale, are carried
More information