Design Strategy of a Piezoelectric Valve for a Color Sorter
|
|
- Lora Lynch
- 5 years ago
- Views:
Transcription
1 Journal of the Korean Physical Society, Vol. 57, No. 4, October 2010, pp Design Strategy of a Piezoelectric Valve for a Color Sorter So-Nam Yun, Young-Bog Ham and Jung-Ho Park Environment and Energy Systems Research Division, Korea Institute of Machinery & Materials, Daejeon Hong-Hee Kim and Hyung-Jong So Kyungwon Ferrite Ind. Co. Ltd., Siheung (Received 8 January 2010) A color sorter is a kind of machine for separating foreign bodies in grain and consists of a feeder, a shoot, a sensor with a lamp and an ejector with a solenoid actuator driven pneumatic valve. A solenoid actuator has some merits, such as a long actuation displacement, a strong attraction force and a long durability, but also has some weak points, such as an attraction force that depends on the operating temperature and a very high power consumption. The drop off in attraction force in a color sorter is a very core parameter for the user or consumer because the color sorter is used in tropical and temperate regions. High power consumption also leads to more and more energy consumption to use the color sorter. This paper presents a new mechanism for the color sorter and discusses the flow characteristics of a piezoelectric driven pneumatic valve, which has a multilayered piezoelectric actuator and two ports for air flow. In order to design the piezoelectric driven pneumatic valve, we analyzed the flow dynamics theoretically, and we researched the processes for fabrication of the multilayered piezoelectric actuator. Finally, we manufactured a pneumatic valve with a multilayered piezoelectric actuator, and based on experiment, we discuss the characteristics of the displacement and the blocking force of the piezoelectric actuator and the flow capability of the manufactured pneumatic valve. PACS numbers: Ed Keywords: Color sorter, Grain sorter, Piezoelectric actuator, Multilayered PZT, CFD DOI: /jkps I. INTRODUCTION A color sorter is a kind of high-tech product which is integrated with optics, machinery and electronics and which combines an embedded system with a digital image technique perfectly. The product adopts a highspeed digitalized module and digital image processing to get high- precision sorting and can detect yellowish and speckled rice effectively. The machinery of a color sorter also consists of a feeder, a shoot, a sensor with a lamp and an ejector with a solenoid actuator driven pneumatic valve. The ejector is very important equipment, and 32 sets, 64 sets or 128 sets are installed in one color sorter. A solenoid actuator has some merits, such as a long actuation displacement, a strong attraction force and a long durability but has also some weak points, such as an attraction force that depends on the operating temperature and a very high power consumption [1 3]. The drop off in attraction force in a color sorter is a very important core parameter for user or consumer because the color ysn688@kimm.re.kr; Fax: sorter is used in tropical and temperate regions. High power consumption also leads to more and more energy consumption to use the color sorter [4,5]. In order to design the piezoelectrically-driven pneumatic valve, the flow dynamics are analyzed theoretically and the processes for fabrication of the multilayered piezoelectric actuator are researched. Finally, pneumatic valve with a multilayered piezoelectric actuator is manufactured, and the characteristics of the displacement, the blocking force of the piezoelectric actuator and the flow capability of the manufactured pneumatic valve are also experimentally discussed. II. ANALYSIS CONDITIONS Figure 1 shows a color sorter with an air ejector, and Fig. 2 shows external and internal views of the analysis model with a piezoelectric actuator for the color sorter. The size of the used piezoelectric actuator is 31 mm 9.5 mm 0.8 mm, and the maximum displacement of the piezoelectric actuator is 300 µm. The orifice sizes of the -913-
2 -914- Journal of the Korean Physical Society, Vol. 57, No. 4, October 2010 Fig. 1. (Color online) Structure of the color sorter. Fig. 3. (Color online) Eddy flow distribution and flow velocity characteristics at an input pressure of 0.3 MPa and Fig. 2. (Color online) CFD model of the piezoelectric valve. (a) External view of the piezoelectric valve and (b) Internal view of the piezoelectric valve. analysis model are 1.2 mm and 1.5 mm, and the analysis of the computational fluid dynamics was conducted under the condition of 0.3 MPa, 0.4 MPa, and 0.5 MPa. The used fluid was air, and the air flow between the inlet and the outlet port was under atmospheric condition. III. ANALYSIS RESULTS Figure 3 shows the result of eddy flow characteristics for 0.3 MPa and The maximum flow velocity is m/s, and the mass flow Fig. 4. (Color online) Pressure distribution characteristics around the orifice. is e-4 kg/s. Figure 4 shows the results of the pressure distribution for 0.3 MPa and an orifice diameter of 1.2 mm. The positive pressure parts are the inlet, and the negative pressure parts are the outlet one. A maximum pressure of MPa occurred at the wall face of the piezoelectric actuator in front of the orifice. A minimum pressure of MPa occurred at the backside of the part that experimented maximum pressure. Figure 5 shows the eddy flow distribution results for an input pressure of 0.4 MPa and The calculated maximum flow velocity is m/s, and the mass flow is 4.789e-4 kg/s. From these results, we know that the output flow rose 15% for a 33% increase in the pressure. We also know that the flow variation between the piezoelectric actuator and the orifice is very
3 Design Strategy of a Piezoelectric Valve for a Color Sorter So-Nam Yun et al Fig. 5. (Color online) Eddy flow distribution and flow velocity characteristics at an input pressure of 0.4 MPa and Fig. 7. (Color online) Eddy flow distribution and flow velocity characteristics at an input pressure of 0.5 MPa and Fig. 6. (Color online) Pressure distribution characteristics around the orifice at 0.4 MPa input pressure and a 1.2 mm orifice diameter. severe. Figure 6 shows the pressure variation when the input pressure is 0.4 MPa and the orifice diameter is 1.2 mm. The maximum pressure is MPa, and the minimum pressure is MPa. From these results, we can conclude that this valve system is very noisy because of the very big pressure difference. An optimal design for reducing the pressure difference is needed for actual operation in an industrial field. Figures 7 and 8 show the eddy flow distribution, the flow velocity variation, the mass flow characteristics and the pressure difference for an input pressure of 0.5 MPa, and The maximum flow velocity and the mass flow capability are 896 m/s and 5.34e-4 kg/s, respectively. Figure 9 shows the eddy flow distribution, the pressure variation and the flow characteristics for an input pressure of 0.5 MPa and an orifice diameter of 1.5 mm. A m/s flow velocity and a mass flow of 5.793e-4 kg/s were calculated by using sim- Fig. 8. (Color online) Pressure distribution characteristics around an orifice at a 0.5 MPa input pressure and a 1.2 mm orifice diameter. ulation software under the condition of an input pressure of 0.4 MPa. If we compare the values for an input pressure of 0.4 MPa and orifice diameters of 1.2 mm and 1.5 mm, the difference in the velocity is about 15%, which means that an orifice diameter of 1.5 mm is better than one of 1.2 mm. For an input pressure of 0.5 MPa, the flow velocity is m/s, and the mass flow is 6.472e-4 kg/s. Figure 10 shows the pressure difference between piezoelectric actuator s front side and back side under the same conditions as in of Fig. 9. We know that the performance for an orifice diameter of 1.5 mm was improved by about 68% compared to that for an orifice diameter of 1.2 mm. From these results, we must consider not only a larger orifice diameter and a bigger piezoelectric blocking force for a fast piezoelectric valve and the best color sorter but also optimal design tuning.
4 -916- Journal of the Korean Physical Society, Vol. 57, No. 4, October 2010 Table 1. Simulation results for a piezoelectric valve. Orifice Diameter 0.3 Mpa 0.4 Mpa 0.5 Mpa 1.2[mm] Velocity [m/s] Mass flow [kg/s] e e e-4 1.5[mm] Velocity [m/s] Mass flow [kg/s] e e e-4 Fig. 11. (Color online) Multilayered bender type PZT actuator. Fig. 12. (Color online) Displacement analysis result. Fig. 9. (Color online) Eddy flow distribution and flow velocity characteristics at an input pressure of 0.5 MPa and an orifice diameter of 1.5 mm. Fig. 13. (Color online) Photo view of the manufactured PZT actuator. Fig. 14. (Color online) Photo view of the piezoelectric valve. blocking force of the piezoelectric actuator. Fig. 10. (Color online) Pressure distribution characteristics around an orifice at a 0.5 MPa input pressure and a 1.5 mm orifice diameter. Table 1 presents the values of the simulation results at input pressures of 0.3 MPa, 0.4 MPa, and 0.5 MPa and orifice diameters of 1.2 mm and 1.5 mm. For the grain sorter, the design parameters are the rated pressure and flow, the cavitations and noise, and the displacement and IV. DESIGN AND MANUFACTURING OF THE PIEZOELECTRIC VALVE Figure 11 shows the appearance and inner structure of a piezoelectric actuator designed for use as a grain sorter. A final model based on the simulation results and trial and error method was designed and fabricated. Figure
5 Design Strategy of a Piezoelectric Valve for a Color Sorter So-Nam Yun et al shows the displacement results which were calculated using Atila Software. Figure 13 shows the manufactured PZT actuator. In this study, the manufactured PZT actuator had a 20-layered structure, and dimensions are 31.0 mm (L) 9.5 mm (W) 0.8 mm (t) with a constant of 220e-12 m/v. Figure 14 shows the inner structure and the assembled appearance of the piezoelectric valve using the designed and manufactured piezoelectric actuator. The ejector (air gun) is very important equipment, and 32 sets, 64 sets or 128 sets are installed in one color sorter. These parameters, such as the dynamic response characteristics, the flow force and the energy consumption, must be discussed for optimal design [6,7]. V. CONCLUSION In this paper, a new mechanism for the color sorter was suggested, and the flow characteristics of a piezoelectrically driven pneumatic valve with a multilayered piezoelectric actuator and two ports for air flow were discussed. In order to design the piezoelectrically driven pneumatic valve, we analyzed the flow dynamics theoretically, and we researched the processes for fabrication of the multilayered piezoelectric actuator. If we compare the performance value for an input pressure of 0.4 MPa and orifice diameters of 1.2 mm and 1.5 mm, the difference in flow velocity is about 15%, which means that an orifice diameter of 1.5 mm is better than one of 1.2 mm. For an input pressure of 0.5 MPa, the performance for that an orifice diameter of 1.5 mm was improved by about 68% compared to that for an orifice diameter of 1.2 mm. From these results, we must consider not only a larger orifice diameter and a bigger piezoelectric blocking force for a fast piezoelectric valve and the best color sorter but also optimal design tuning, such as the low energy consumption characteristics and the flow force degradation. REFERENCES [1] L. Nohos, in Proceedings of the 49th National Conference on Fluid Power (Nevada, USA, March 19-21, 2002), p [2] M. Weinmann, M. Muth, M. Giousouf, C. Hanisch and P. Post, in 8th International Conference on New Actuators & 2nd International Exhibition on Smart Actuators and Drive Systems (Bremen, Germany, 2002), p [3] M. Weinmann, A. J. Schmid and M. Fuss, in 10th International Conference on New Actuators & 4th International Exhibition on Smart Actuators and Drive Systems (Bremen, Germany, 2006), p [4] P. Mandurino and P. M. Weaver, in 9th International Conference on New Actuators & 3rd International Exhibition on Smart Actuators and Drive Systems (Bremen, Germany, 2004), p [5] H. Murrenhoff, in Proceedings of the 49th National Conference on Fluid Power (Nevada, USA, 2002), p [6] S.-N. Yun, K.-W. Lee, H.-H. Kim and H.-J. So, Mater. Chem. Phys. 97, 1 (2006). [7] S.-N. Yun, Y.-B. Ham, J.-H. Park, W.-S. Seo and K.-W. Lee, in International Conference on Advanced Technology in Experimental Mechanics (Fukuoka, Japan, 2007), p. 208.
NEW STRATEGY FOR DESIGN AND FABRICATING OF A GRAIN SORTING SYSTEM USING HIGH-SPEED PIEZOELECTRIC VALVES
NEW STRATEGY FOR DESIGN AND FABRICATING OF A GRAIN SORTING SYSTEM USING HIGH-SPEED PIEZOELECTRIC VALVES So-Nam Yun*, Hwang-Hun Jeong**, Dong-Gun Kim**, Eun-A Jeong** and Hong-Hee Kim*** * Department of
More informationDEVELOPMENT OF VIBRATION CONDITION MONITORING SYSTEM APPLYING OPTICAL SENSORS FOR GENERATOR WINDING INTEGRITY OF POWER UTILITIES
Advanced Materials Development and Performance (AMDP2011) International Journal of Modern Physics: Conference Series Vol. 6 (2012) 98-103 World Scientific Publishing Company DOI: 10.1142/S2010194512003005
More informationJournal of Advanced Mechanical Design, Systems, and Manufacturing
Pneumatic Valve Operated by Multiplex Pneumatic Transmission * Yasutaka NISHIOKA **, Koichi SUZUMORI **, Takefumi KANDA ** and Shuichi WAKIMOTO ** **Department of Natural Science and Technology, Okayama
More informationPassive Vibration Reduction with Silicone Springs and Dynamic Absorber
Available online at www.sciencedirect.com Physics Procedia 19 (2011 ) 431 435 International Conference on Optics in Precision Engineering and Nanotechnology 2011 Passive Vibration Reduction with Silicone
More informationThe Effects of Chamber Temperature and Pressure on a GDI Spray Characteristics in a Constant Volume Chamber
한국동력기계공학회지제18권제6호 pp. 186-192 2014년 12월 (ISSN 1226-7813) Journal of the Korean Society for Power System Engineering http://dx.doi.org/10.9726/kspse.2014.18.6.186 Vol. 18, No. 6, pp. 186-192, December 2014
More informationTrouble Shooting in Vertical Fire Hydrant Pump by Vibration Analysis - A Case Study
Trouble Shooting in Vertical Fire Hydrant Pump by Vibration Analysis - A Case Study V. G. Arajpure & H. G. Patil Department of Mechanical Engineering, BDCOE Sewagram, Dist:-Wardha, Maharashtra 442001,
More informationCFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate
CFD Investigation of Influence of Tube Bundle Cross-Section over Pressure Drop and Heat Transfer Rate Sandeep M, U Sathishkumar Abstract In this paper, a study of different cross section bundle arrangements
More informationStudy on Flow Characteristic of Gear Pumps by Gear Tooth Shapes
Journal of Applied Science and Engineering, Vol. 20, No. 3, pp. 367 372 (2017) DOI: 10.6180/jase.2017.20.3.11 Study on Flow Characteristic of Gear Pumps by Gear Tooth Shapes Wen Wang 1, Yan-Mei Yin 1,
More information2. Test and Analysis Method
Indian Journal of Science and Technology, Vol 8(21), DOI: 10.17485/ijst/2015/v8i21/79077, September 2015 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Flow Analysis on Formation of Back-pressure in
More informationApplication of Simulation-X R based Simulation Technique to Notch Shape Optimization for a Variable Swash Plate Type Piston Pump
Application of Simulation-X R based Simulation Technique to Notch Shape Optimization for a Variable Swash Plate Type Piston Pump Jun Ho Jang 1, Won Jee Chung 1, Dong Sun Lee 1 and Young Hwan Yoon 2 1 School
More informationPERFORMANCE OF FUNCTION RELATIONSHIP WITH TREND BY SELECTIVE ACTUATOR
International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 7, July 2018, pp. 215 219, Article ID: IJMET_09_07_025 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=7
More informationDesign of pneumatic proportional flow valve type 5/3
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Design of pneumatic proportional flow valve type 5/3 To cite this article: P A Laski et al 2017 IOP Conf. Ser.: Mater. Sci. Eng.
More informationDefect Monitoring In Railway Wheel and Axle
IJR International Journal of Railway, pp. 1-5 The Korean Society for Railway Defect Monitoring In Railway Wheel and Axle Seok-Jin Kwon, Dong-Hyoung Lee *, and Won-Hee You * Abstract The railway system
More informationDevelopment of Pushrim-Activated Power-Assisted Wheelchair
Development of Pushrim-Activated Power-Assisted Wheelchair Yoon Heo, Ki-Tae Nam, Eung-Pyo Hong, Mu-Sung Mun Korea Orthopedics & Rehabilitation Engineering Center 26, Gyeongin-ro 10beon-gil, Bupyeong-gu,
More informationSwitching Impulse Flashover Tests and Analysis for 765kV Jumper V-strings with Damaged Insulators
J Electr Eng Technol Vol. 8, No. 2: 359-363, 2013 http://dx.doi.org/10.5370/jeet.2013.8.2.359 ISSN(Print) 1975-0102 ISSN(Online) 2093-7423 Switching Impulse Flashover Tests and Analysis for 765kV Jumper
More informationDesign and Analysis of Electromagnetic Tubular Linear Actuator for Higher Performance of Active Accelerate Pedal
Journal of Magnetics 14(4), 175-18 (9) DOI: 1.483/JMAG.9.14.4.175 Design and Analysis of Electromagnetic Tubular Linear Actuator for Higher Performance of Active Accelerate Pedal Jae-Yong Lee, Jin-Ho Kim-,
More informationActive magnetic inertia latch for hard disk drives
Microsyst Technol (2011) 17:127 132 DOI 10.1007/s00542-010-1168-8 TECHNICAL PAPER Active magnetic inertia latch for hard disk drives Bu Hyun Shin Kyung-Ho Kim Seung-Yop Lee Received: 2 August 2010 / Accepted:
More informationEffect of Stator Shape on the Performance of Torque Converter
16 th International Conference on AEROSPACE SCIENCES & AVIATION TECHNOLOGY, ASAT - 16 May 26-28, 2015, E-Mail: asat@mtc.edu.eg Military Technical College, Kobry Elkobbah, Cairo, Egypt Tel : +(202) 24025292
More informationChina. Keywords: Electronically controled Braking System, Proportional Relay Valve, Simulation, HIL Test
Applied Mechanics and Materials Online: 2013-10-11 ISSN: 1662-7482, Vol. 437, pp 418-422 doi:10.4028/www.scientific.net/amm.437.418 2013 Trans Tech Publications, Switzerland Simulation and HIL Test for
More informationImprovements of Existing Overhead Lines for 180km/h operation of the Tilting Train
Improvements of Existing Overhead Lines for 180km/h operation of the Tilting Train K. Lee, Y.H. Cho, Y. Park, S. Kwon Korea Railroad Research Institute, Uiwang-City, Korea Abstract The purpose of this
More informationDesign and experiment of hydraulic impact loading system for mine cable bolt
Procedia Earth and Planetary Science 1 (2009) 1337 Procedia Earth and Planetary Science www.elsevier.com/locate/procedia The 6 th International Conference on Mining Science & Technology Design and experiment
More information[Rao, 4(7): July, 2015] ISSN: (I2OR), Publication Impact Factor: 3.785
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY CFD ANALYSIS OF GAS COOLER FOR ASSORTED DESIGN PARAMETERS B Nageswara Rao * & K Vijaya Kumar Reddy * Head of Mechanical Department,
More informationDesign and Analysis of Hydrostatic Bearing Slide Used Linear Motor Direct-drive. Guoan Hou 1, a, Tao Sun 1,b
Advanced Materials Research Vols. 211-212 (2011) pp 666-670 Online available since 2011/Feb/21 at www.scientific.net (2011) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/amr.211-212.666
More informationAvailable online at ScienceDirect. Procedia Engineering 68 (2013 ) 70 76
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 68 (2013 ) 70 76 Malaysian International Tribology Conference 2013 (MITC2013) The Effects of Oil Supply Pressure at Different
More informationOptimization of Seat Displacement and Settling Time of Quarter Car Model Vehicle Dynamic System Subjected to Speed Bump
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Optimization
More informationKINEMATIC DESIGN OF LIFT-TIPPING MECHANISM FOR SMALL SOLID WASTE COLLECTION TRUCK
Journal of Science and Technology, Vol. 31, No. 2 (2011), pp 135-141 135 2011 Kwame Nkrumah University of Science and Technology (KNUST) TECHNICAL NOTE KINEMATIC DESIGN OF LIFT-TIPPING MECHANISM FOR SMALL
More informationCharacteristics Analysis of Novel Outer Rotor Fan-type PMSM for Increasing Power Density
Journal of Magnetics 23(2), 247-252 (2018) ISSN (Print) 1226-1750 ISSN (Online) 2233-6656 https://doi.org/10.4283/jmag.2018.23.2.247 Characteristics Analysis of Novel Outer Rotor Fan-type PMSM for Increasing
More informationDesign and Development of Universal Test Bench for Testing Valves of Automobile Braking System
International Journal of Advance Industrial Engineering E-ISSN 2320 5539 2017 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijaie/ Research Article Design and Development of
More informationComparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured Pressure Pulsations and to CFD Results
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2012 Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured
More informationTheoretical and Experimental Investigation of Compression Loads in Twin Screw Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2004 Theoretical and Experimental Investigation of Compression Loads in Twin Screw Compressor
More informationSmart Power Management System for Leisure-ship
Journal of Navigation and Port Research International Edition Vol.35, No.9 pp. 749~753, 2011 (ISSN-1598-5725) DOI : http://dx.doi.org/10.5394/kinpr.2011.35.9.749 Smart Power Management System for Leisure-ship
More informationA Study on the Efficiency of Tapered Roller Bearings
A Study on the Efficiency of Tapered Roller Bearings IN WOOK LEE*, DAE YONG LEE*, HEE CHEOL KIM**, KWANG HYUN KIM***, and CHUL KI SONG**** *R&D center, Schaffler Korea, Changwon, Gyeongnam,Korea ** Yongdong
More informationCFD Analysis of Oil Discharge Rate in Rotary Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering CFD Analysis of Oil Discharge Rate in Rotary Compressor Liying Deng haitunsai@.com Shebing
More informationDynamic Simulation of the Impact Mechanism of Hydraulic Rock Drill Based on AMESim Yin Zhong-jun 1,a, Hu Yi-xin 1,b
Advanced Materials Research Online: 2012-01-24 ISSN: 1662-8985, Vols. 452-453, pp 1296-1300 doi:10.4028/www.scientific.net/amr.452-453.1296 2012 Trans Tech Publications, Switzerland Dynamic Simulation
More informationKinematic Analysis of the Slider-Crank Mechanism in Automated Vibration Sausage Feeder
5 th World Conference on Applied Sciences, Engineering & Technology 0-04 June 016, HCMUT, Vietnam Kinematic Analysis of the Slider-Crank Mechanism in Automated Vibration Sausage Feeder NGUYễN HồNG NGÂN
More informationExperimental Investigation of Effects of Shock Absorber Mounting Angle on Damping Characterstics
Experimental Investigation of Effects of Shock Absorber Mounting Angle on Damping Characterstics Tanmay P. Dobhada Tushar S. Dhaspatil Prof. S S Hirmukhe Mauli P. Khapale Abstract: A shock absorber is
More informationA study on the application of tripod joints to transmit the driving torque of axial piston hydraulic motor
A study on the application of tripod joints to transmit the driving torque of axial piston hydraulic motor Youna-Boa HAM*, Sung-Dona KIM** *Senior Researcher, Department of Advanced Industrial Technology
More informationImprovements for reduction of the brake squeal noise at Seoul metro rolling stock on tracks
Journal of Mechanical Science and Technology 23 (2009) 2206~2214 Journal of Mechanical Science and Technology www.springerlink.com/content/1738494x DOI 10.1007/s122060090518x Improvements for reduction
More informationStudy on Flow Fields in Variable Area Nozzles for Radial Turbines
Vol. 4 No. 2 August 27 Study on Fields in Variable Area Nozzles for Radial Turbines TAMAKI Hideaki : Doctor of Engineering, P. E. Jp, Manager, Turbo Machinery Department, Product Development Center, Corporate
More informationAerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System
Vehicle Engineering (VE) Volume 2, 2014 www.seipub.org/ve Aerodynamic Characteristics of Sedan with the Rolling Road Ground Effect Simulation System Yingchao Zhang 1, Linlin Ren 1, Kecheng Pan 2, Zhe Zhang*
More informationStability Analysis of 6MW Wind Turbine High Speed Coupling using the Finite Element Method
Stability Analysis of 6MW Wind Turbine High Speed Coupling using the Finite Element Method Hanyong On 1, Junwoo Bae 1, JongHun Kang 2, HyoungWoo Lee 2, Seungkeun Jeong 3 and SooKeun Park 4# 1 Department
More informationA Particulate Matter Sensor with Groove Electrode for Real-Time Diesel Engine On-Board Diagnostics
Journal of Sensor Science and Technology Vol. 22, No. 3 (2013) pp. 191-196 http://dx.doi.org/10.5369/jsst.2013.22.3.191 pissn 1225-5475/eISSN 2093-7563 A Particulate Matter Sensor with Groove Electrode
More informationDEVELOPMENT OF AUTOMATIC ROAD MARKING REMOVING EQUIPMENT USING HIGH PRESSURE WATER-JET
DEVELOPMENT OF AUTOMATIC ROAD MARKING REMOVING EQUIPMENT USING HIGH PRESSURE WATER-JET Kyung-Min Park*, Young-Bog Ham*, Soon-Wook Kwon**, Kyoon-Tai Kim**, Jae-Goo Han**, Jeoung-Tae Kim*** * Advanced Industrial
More informationA STUDY ON ENERGY MANAGEMENT SYSTEM FOR STABLE OPERATION OF ISOLATED MICROGRID
A STUDY ON ENERGY MANAGEMENT SYSTEM FOR STABLE OPERATION OF ISOLATED MICROGRID Kwang Woo JOUNG Hee-Jin LEE Seung-Mook BAEK Dongmin KIM KIT South Korea Kongju National University - South Korea DongHee CHOI
More informationA Study on the Measurement of Contact Force of Pantograph on High Speed Train
ICCAS005 June -5, KINTEX, Gyeonggi-Do, Korea A Study on the Measurement of Contact Force of Pantograph on High Speed Train Sung-Il Seo*, Yong-Hyun Cho**, Jin-Yong Mok***, Choon-Soo Park*** and Ki-Hwan
More informationComparing PID and Fuzzy Logic Control a Quarter Car Suspension System
Nemat Changizi, Modjtaba Rouhani/ TJMCS Vol.2 No.3 (211) 559-564 The Journal of Mathematics and Computer Science Available online at http://www.tjmcs.com The Journal of Mathematics and Computer Science
More informationSteering Dynamics of Tilting Narrow Track Vehicle with Passive Front Wheel Design
Journal of Physics: Conference Series PAPER OPEN ACCESS Steering Dynamics of Tilting Narrow Track Vehicle with Passive Front Wheel Design To cite this article: Jeffrey Too Chuan TAN et al 6 J. Phys.: Conf.
More informationParametric Modeling and Finite Element Analysis of the Brake Drum Based on ANSYS APDL
2017 3rd International Conference on Green Materials and Environmental Engineering (GMEE 2017) ISBN: 978-1-60595-500-1 Parametric Modeling and Finite Element Analysis of the Brake Drum Based on ANSYS APDL
More informationModeling and Analysis of Tractor Trolley Axle Using Ansys
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 6, Issue 5 (May. - Jun. 2013), PP 88-92 Modeling and Analysis of Tractor Trolley Axle Using Ansys
More informationDual cycloid gear mechanism for automobile safety pretensioners
J. Cent. South Univ. (2012) 19: 365 373 DOI: 10.1007/s11771 012 1013 6 Dual cycloid gear mechanism for automobile safety pretensioners SHIN Joong-ho, KIM Chang-hyun, YUN Pyeong-hwa, KWON Soon-man Department
More informationUsing energy storage for modeling a stand-alone wind turbine system
INTERNATIONAL JOURNAL OF ENERGY and ENVIRONMENT Volume, 27 Using energy storage for modeling a stand-alone wind turbine system Cornel Bit Abstract This paper presents the modeling in Matlab-Simulink of
More informationINDUCTION motors are widely used in various industries
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 44, NO. 6, DECEMBER 1997 809 Minimum-Time Minimum-Loss Speed Control of Induction Motors Under Field-Oriented Control Jae Ho Chang and Byung Kook Kim,
More informationAvailable online at ScienceDirect. Procedia CIRP 33 (2015 )
Available online at www.sciencedirect.com ScienceDirect Procedia CIRP 33 (2015 ) 581 586 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '14 Magnetic fluid seal
More informationNumerical Simulation of the Effect of 3D Needle Movement on Cavitation and Spray Formation in a Diesel Injector
Journal of Physics: Conference Series PAPER OPEN ACCESS Numerical Simulation of the Effect of 3D Needle Movement on Cavitation and Spray Formation in a Diesel Injector To cite this article: B Mandumpala
More informationA STUDY ON A SOUND OPERATED VALVE FOR A WEARABLE PNEUMATIC SYSTEM
P1-33 Proceedings of the 7th JFPS International Symposium on Fluid Power, TOYM 28 September 1-18, 28 STUDY ON SOUND OPERTED VLVE FOR WERBLE PNEUMTIC SYSTEM to KITGW, Shuyi JING, Canghai LIU and Hideyuki
More informationStudy of Performance and Emission Characteristics of a Two Stroke Si Engine Operated with Gasoline Manifold Injectionand Carburetion
Indian Journal of Science and Technology, Vol 9(37), DOI: 10.17485/ijst/2016/v9i37/101984, October 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Study of Performance and Emission Characteristics
More informationDESIGN OF THROTTLE BODY: A COMPARATIVE STUDY OF DIFFERENT SHAFT PROFILES USING CFD ANALYSIS
Int. J. Chem. Sci.: 14(S2), 2016, 681-686 ISSN 0972-768X www.sadgurupublications.com DESIGN OF TROTTLE BODY: A COMARATIVE STUDY OF DIFFERENT SAFT ROFILES USING CFD ANALYSIS M. BALAJI *, K. AMAL SATEES,
More informationAnalysis on natural characteristics of four-stage main transmission system in three-engine helicopter
Article ID: 18558; Draft date: 2017-06-12 23:31 Analysis on natural characteristics of four-stage main transmission system in three-engine helicopter Yuan Chen 1, Ru-peng Zhu 2, Ye-ping Xiong 3, Guang-hu
More informationThe Performance Optimization of Rolling Piston Compressors Based on CFD Simulation
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2004 The Performance Optimization of Rolling Piston Compressors Based on CFD Simulation
More informationChapter 2 Analysis on Lock Problem in Frontal Collision for Mini Vehicle
Chapter 2 Analysis on Lock Problem in Frontal Collision for Mini Vehicle Ce Song, Hong Zang and Jingru Bao Abstract To study the lock problem in the frontal collision test on a kind of mini vehicle s sliding
More information2030. Design and experiments of multi-stage coil gun system
2030. Design and experiments of multi-stage coil gun system Su-Jeong Lee 1, Jin Ho Kim 2, Soo-Hyun Kim 3 1, 2 Department of Mechanical Engineering, Yeoungnam University, Gyeongsan, Gyeongbuk 38541, Korea
More informationComposite Long Shaft Coupling Design for Cooling Towers
Composite Long Shaft Coupling Design for Cooling Towers Junwoo Bae 1,#, JongHun Kang 2, HyoungWoo Lee 2, Seungkeun Jeong 1 and SooKeun Park 3,* 1 JAC Coupling Co., Ltd., Busan, South Korea. 2 Department
More informationDesign and Analysis of Hydraulic Chassis with Obstacle Avoidance Function
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Design and Analysis of Hydraulic Chassis with Obstacle Avoidance Function To cite this article: Yingjie Hong and Xiang Zhang 2017
More informationCOMPRESSIBLE FLOW ANALYSIS IN A CLUTCH PISTON CHAMBER
COMPRESSIBLE FLOW ANALYSIS IN A CLUTCH PISTON CHAMBER Masaru SHIMADA*, Hideharu YAMAMOTO* * Hardware System Development Department, R&D Division JATCO Ltd 7-1, Imaizumi, Fuji City, Shizuoka, 417-8585 Japan
More informationHeat Transfer Enhancement for Double Pipe Heat Exchanger Using Twisted Wire Brush Inserts
Heat Transfer Enhancement for Double Pipe Heat Exchanger Using Twisted Wire Brush Inserts Deepali Gaikwad 1, Kundlik Mali 2 Assistant Professor, Department of Mechanical Engineering, Sinhgad College of
More informationCFD Analysis for Designing Fluid Passages of High Pressure Reciprocating Pump
ISSN 2395-1621 CFD Analysis for Designing Fluid Passages of High Pressure Reciprocating Pump #1 SuhasThorat, #2 AnandBapat, #3 A. B. Kanase-Patil 1 suhas31190@gmail.com 2 dkolben11@gmail.com 3 abkanasepatil.scoe@sinhgadedu.in
More informationNew Capacity Modulation Algorithm for Linear Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 010 New Capacity Modulation Algorithm for Linear Compressor Jaeyoo Yoo Sungho Park Hyuk
More informationHigh-voltage Direct Inverter Applied to Induced Draft Fan Motor at Takehara Thermal Power Station No. 3 of Electric Power Development Co., Ltd.
Hitachi Review Vol. 53 (2004), No. 3 121 High-voltage Direct Inverter Applied to Induced Draft Fan Motor at Takehara Thermal Power Station No. 3 of Electric Power Development Co., Ltd. Hiroaki Yamada Kiyoshi
More informationA Study on the Optimum Shape of Automobile Air Cleaner Diffuser
A Study on the Optimum Shape of Automobile Air Cleaner Diffuser HoseopSong 1, Byungmo Yang 2 and Haengmuk Cho 1,* 1 Division of Mechanical and Automotive Engineering, Kongju National University, Chungnam,
More informationNumerical Study on the Flow Characteristics of a Solenoid Valve for Industrial Applications
Numerical Study on the Flow Characteristics of a Solenoid Valve for Industrial Applications TAEWOO KIM 1, SULMIN YANG 2, SANGMO KANG 3 1,2,4 Mechanical Engineering Dong-A University 840 Hadan 2 Dong, Saha-Gu,
More informationDetection of internal short circuit in Li-ion battery by estimating its resistance
Proceedings of the 4th IIAE International Conference on Intelligent Systems and Image Processing 2016 Detection of internal short circuit in Li-ion battery by estimating its resistance Minhwan Seo a, Taedong
More informationRotor Position Detection of CPPM Belt Starter Generator with Trapezoidal Back EMF using Six Hall Sensors
Journal of Magnetics 21(2), 173-178 (2016) ISSN (Print) 1226-1750 ISSN (Online) 2233-6656 http://dx.doi.org/10.4283/jmag.2016.21.2.173 Rotor Position Detection of CPPM Belt Starter Generator with Trapezoidal
More informationNoise Reduction of Accumulators for R410A Rotary Compressors
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2008 Noise Reduction of Accumulators for R410A Rotary Compressors Ling Li Guangdong Meizhi
More informationUse of Flow Network Modeling for the Design of an Intricate Cooling Manifold
Use of Flow Network Modeling for the Design of an Intricate Cooling Manifold Neeta Verma Teradyne, Inc. 880 Fox Lane San Jose, CA 94086 neeta.verma@teradyne.com ABSTRACT The automatic test equipment designed
More informationFuzzy based Adaptive Control of Antilock Braking System
Fuzzy based Adaptive Control of Antilock Braking System Ujwal. P Krishna. S M.Tech Mechatronics, Asst. Professor, Mechatronics VIT University, Vellore, India VIT university, Vellore, India Abstract-ABS
More information1614. Dynamic experiment of active accelerator pedal system with a coreless tubular electromagnetic linear actuator
1614. Dynamic experiment of active accelerator pedal system with a coreless tubular electromagnetic linear actuator Jae Yong Lee 1, Ki Bum Lee 2, Jin Ho Kim 3 1 Korea Textile Machinery Research Institute,
More informationDynamic performance of flow control valve using different models of system identification
Dynamic performance of flow control valve using different models of system identification Ho Chang, Po-Kai Tzenog and Yun-Min Yeh Department of Mechanical Engineering, National Taipei University of Technology
More informationENERGY RECOVERY SYSTEM FOR EXCAVATORS WITH MOVABLE COUNTERWEIGHT
Journal of KONES Powertrain and Transport, Vol. 2, No. 2 213 ENERGY RECOVERY SYSTEM FOR EXCAVATORS WITH MOVABLE COUNTERWEIGHT Artur Gawlik Cracow University of Technology Institute of Machine Design Jana
More informationEffect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port
Effect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port Kunjan Sanadhya, N. P. Gokhale, B.S. Deshmukh, M.N. Kumar, D.B. Hulwan Kirloskar Oil Engines Ltd.,
More informationSimulation and Analysis of Vehicle Suspension System for Different Road Profile
Simulation and Analysis of Vehicle Suspension System for Different Road Profile P.Senthil kumar 1 K.Sivakumar 2 R.Kalidas 3 1 Assistant professor, 2 Professor & Head, 3 Student Department of Mechanical
More informationANALYSIS OF THE INFLUENCE OF HYDRAULIC CYLINDER DIAMETER TO THE TOTAL DAMPING FORCE AND THE GENERATED ELECTRICITY OF REGENERATIVE SHOCK ABSORBER
ANALYSIS OF THE INFLUENCE OF HYDRAULIC CYLINDER DIAMETER TO THE TOTAL DAMPING FORCE AND THE GENERATED ELECTRICITY OF REGENERATIVE SHOCK ABSORBER Harus Laksana Guntur Dynamic System and Vibration Laboratory,
More informationRemarkable CO 2 Reduction of the Fixed Point Fishing Plug-in Hybrid Boat
Journal of Asian Electric Vehicles, Volume 13, Number 1, June 215 Remarkable CO 2 Reduction of the Fixed Point Fishing Plug-in Hybrid Boat Shigeyuki Minami 1, Kazusumi Tsukuda 2, Kazuto Koizumi 3, and
More informationDevelopment of Dynamic Calibration Machine for Pressure Transducers
Journal of Physics: Conference Series PAPER OPEN ACCESS Development of Dynamic Calibration Machine for Pressure Transducers To cite this article: Yasin Durgut et al 2018 J. Phys.: Conf. Ser. 1065 162013
More informationWheels for a MEMS MicroVehicle
EE245 Fall 2001 1 Wheels for a MEMS MicroVehicle Isaac Sever and Lloyd Lim sever@eecs.berkeley.edu, limlloyd@yahoo.com ABSTRACT Inch-worm motors achieve high linear displacements with high forces while
More informationEnhance the Performance of Heat Exchanger with Twisted Tape Insert: A Review
Enhance the Performance of Heat Exchanger with Twisted Tape Insert: A Review M.J.Patel 1, K.S.Parmar 2, Umang R. Soni 3 1,2. M.E. Student, department of mechanical engineering, SPIT,Basna, Gujarat, India,
More informationForced vibration frequency response for a permanent magnetic planetary gear
Forced vibration frequency response for a permanent magnetic planetary gear Xuejun Zhu 1, Xiuhong Hao 2, Minggui Qu 3 1 Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System, Yanshan
More informationDEVELOPMENT OF THE SUPERCRITICAL CARBON DIOXIDE POWER CYCLE TEST LOOP WITH THE TURBO-GENERATOR USING THE PARTIAL ADMISSION NOZZLE
Proceedings of the Asian Conference on Thermal Sciences 2017, 1st ACTS March 26-30, 2017, Jeju Island, Korea ACTS-P00317 DEVELOPMENT OF THE SUPERCRITICAL CARBON DIOXIDE POWER CYCLE TEST LOOP WITH THE TURBO-GENERATOR
More informationKobe University Repository : Kernel
Kobe University Repository : Kernel タイトル Title 著者 Author(s) 掲載誌 巻号 ページ Citation 刊行日 Issue date 資源タイプ Resource Type 版区分 Resource Version 権利 Rights DOI JaLCDOI URL Visualization of cavitation phenomena in
More informationResearch in hydraulic brake components and operational factors influencing the hysteresis losses
Research in hydraulic brake components and operational factors influencing the hysteresis losses Shreyash Balapure, Shashank James, Prof.Abhijit Getem ¹Student, B.E. Mechanical, GHRCE Nagpur, India, ¹Student,
More informationDevelopment of the Micro Combustor
Development of the Micro Combustor TAKAHASHI Katsuyoshi : Advanced Technology Department, Research & Engineering Division, Aero-Engine & Space Operations KATO Soichiro : Doctor of Engineering, Heat & Fluid
More informationComparison between Optimized Passive Vehicle Suspension System and Semi Active Fuzzy Logic Controlled Suspension System Regarding Ride and Handling
Comparison between Optimized Passive Vehicle Suspension System and Semi Active Fuzzy Logic Controlled Suspension System Regarding Ride and Handling Mehrdad N. Khajavi, and Vahid Abdollahi Abstract The
More informationElectric Vehicles Coordinated vs Uncoordinated Charging Impacts on Distribution Systems Performance
Electric Vehicles Coordinated vs Uncoordinated Charging Impacts on Distribution Systems Performance Ahmed R. Abul'Wafa 1, Aboul Fotouh El Garably 2, and Wael Abdelfattah 2 1 Faculty of Engineering, Ain
More informationStudy of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car
Journal of Physics: Conference Series PAPER OPEN ACCESS Study of intake manifold for Universiti Malaysia Perlis automotive racing team formula student race car To cite this article: A Norizan et al 2017
More informationRedesign of exhaust protection cover for high air flow levelling valve
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 2 Ver. II (Mar- Apr. 2014), PP 90-96 Redesign of exhaust protection cover for high air
More informationRESEARCH OF AIR FLOW DEBIT WITH NEW CONSTRUCTION INNER LINER
ISSN 1392-1134/ eissn 2345-0371 Agricultural Engineering, Research Papers, 2015, Vol. 47, 1-4 p. RESEARCH OF AIR FLOW DEBIT WITH NEW CONSTRUCTION INNER LINER D.Mažeika*, A.Bubulis**, A.Bartkus***, A.Pauliukas****
More informationA Study on the Contact Force between Catenary and Pantograph in Duplicate KTX-II Operation
IJR International Journal of Railway Vol. 6, No. 1 / March 2013, pp. 1-6 A Study on the Contact Force between Catenary and Pantograph in Duplicate KTX-II Operation Seung-Wook Kang*, Sang-Ahm Kim* and In-Chol
More informationResearch on vibration reduction of multiple parallel gear shafts with ISFD
Research on vibration reduction of multiple parallel gear shafts with ISFD Kaihua Lu 1, Lidong He 2, Wei Yan 3 Beijing Key Laboratory of Health Monitoring and Self-Recovery for High-End Mechanical Equipment,
More informationFlow Behavior and Friction Factor. in Internally Grooved Pipe Wall
Adv. Studies Theor. Phys., Vol. 8, 2014, no. 14, 643-647 HIKARI Ltd, www.m-hikari.com http://dx.doi.org/10.12988/astp.2014.4573 Flow Behavior and Friction Factor in Internally Grooved Pipe Wall Putu Wijaya
More informationChangchun, China. 1 State Key Laboratory of Automotive Simulation and Control, Jilin University, 5988 Renmin Street
Applied Mechanics and Materials Online: 2014-05-23 ISSN: 1662-7482, Vols. 556-562, pp 1441-1445 doi:10.4028/www.scientific.net/amm.556-562.1441 2014 Trans Tech Publications, Switzerland The Design of an
More informationNOVEL DAMPER FOR PASSIVE SECURITY INCREASING
Journal of KONES Powertrain and Transport Vol 17 No 1 010 NOVEL DAMPER FOR PASSIVE SECURITY INCREASING Adrian Ioan Niculescu Romanian Academy Institute of Solid Mechanics Constantin Mille Street 15 0100141
More information