L E V E L P L U S M - S E R I E S ANALOG
|
|
- Hugh Strickland
- 5 years ago
- Views:
Transcription
1 L E V E L P L U S M - S E R I E S ANALOG P r o d u c t S p e c i f i c a t i o n s NEMA 4X Housing, Sanitary Gauge Single Chamber Housing, Rigid Gauge Dual Chamber Housing, Flexible Gauge Level Plus M-Series liquid level gauges offer you unsurpassed flexibility to meet most process application conditions. M-Series gauges are modular in design, offering you a selection of electronics housing styles, sensor pipe styles and materials of construction. The M-Series gauge features a removable sensing element. At any time, the sensor element and electronics housing may be removed from the sensor pipe without disturbing the operation of your process. The rigid sensor comes standard with a rigid sensor element and the flexible sensor comes standard with a flexible sensor element. Optional flexible sensor elements are available for rigid pipe configurations. Up to two 4 to 20 ma loops are available for analog indication of level, interface, and temperature. HART communication allows the M-Series gauge to indicate and display all three measurements variables simultaneously. Set-up, calibration, and diagnostics are available from any point in the loop using a standard HART hand-held terminal. An optional on-board display and keypad is also provided for local indication and programming. The M-Series gauges can incorporate an RTD for spot temperature measurement of your process. Rigid gauges are available in lengths up to 25 feet and flexible gauges are available up to 40 feet in length. PARAMETER SPECIFICATION F e a t u r e s Modular design High accuracy and repeatability Two channel output Multi-drop HART communication Explosionproof and/or Intrinsically Safe (model dependent) No maintenance required A p p l i c a t i o n s Process Level Measurement Bulk Storage Interface Measurement Temperature Measurement Magnetic Level Gauge Transmitters M a r k e t s Pharmaceutical Biotech Semiconductor Speciality Chemical Process Chemical LPG m LEVEL OUTPUT Measured Variable: Full Range: Non-Linearity: Repeatability: Process Temperature: TEMPERATURE OUTPUT Temperature Accuracy: ELECTRONICS Input Voltage Range: Safety Approval: (Depending on Configuration) ENVIRONMENTAL Operating Temperature: Vessel Pressure: FIELD INSTALLATION Length (excluding housing): Mounting: Product level and interface level 20 in. to 40 ft. (508 mm to mm) 0.035% F.S. or 1/32 in. (0.794 mm) 0.01% F.S. or in. (0.381 mm) -40 to 257 ºF (-40 to 125 ºC) ± 2.7 ºF (± 1.5 ºC) 10.5 to 36.1 Vdc FM/ CSA Explosionproof/Instrinsically Safe Cenelec/PTB Intrinsically Safe Electronics: -40 to 160 ºF (-40 to 71 ºC) (Dependent on float pressure rating) 20 in. to 40 ft. (508 mm to 12,192 mm) 3/4 in. NPT adjustable fitting (Rigid pipe) 1 in. NPT adjustable fitting (Flexible pipe) Whichever is greater Contact factory for longer lengths. Length dependent. Contact factory for higher temperatures. Flexible sensor elements are available for rigid pipe configurations as an option. All Specifications are subject to change. Please contact MTS for specifications critical to your needs.
2 L E V E L P L U S M - S E R I E S A N A L O G PRINCIPLE OF MAGNETOSTRICTION The liquid level gauge is composed of three concentric members. The outermost member is a protective, product-compatible outer pipe that withstands aggressive or harsh process industry applications. The middle member has a resistive temperature device (RTD) mounted on it for accurate temperature measuring. The heart of the gauge design is the innermost member the waveguide a formed element constructed of a proprietary magnetostrictive material. A low current interrogation pulse is generated in the gauge electronics and transmitted down the waveguide creating an electromagnetic field along the length of the waveguide. When this magnetic field interacts with the permanent magnetic field of a magnet mounted inside the float, a torsional strain pulse, or waveguide twist, results. This waveguide twist is detected as a return pulse. The time period between the initiation of the interrogation pulse and the detection of the return pulse is used to determine the level measurement with a high degree of accuracy and reliability. Waveguide Outer Pipe Float (moves as level changes Float Magnets Magnetic Field from Float Magnets Waveguide Twist (at intersection of magnetic field) Magnetic Field from Interrogation Pulse ABOUT MTS MTS Systems Corporation, Sensors Division is a global operation, with facilities in the U.S., Germany and Japan. In the U.S., MTS Sensors Division is an ISO 9001 facility manufacturing highly repeatable and accurate Level Plus gauges as well as the rugged and reliable Temposonics position sensors. With a strong commitment to research and development, product quality and customer service, Sensors Division is constantly seeking ways to bring the highest value to our customers. MTS Sensor Technologie, located in Lüdenscheid, Germany, is also an ISO 9000 facility and manufactures both the Level Plus and Temposonics product lines. The strong technical staff at Sensor Technologie provides engineering assistance as well as sales and service to all of Europe. Constant communication between the product development team members in the U.S. and Germany assure that global market needs are addressed. MTS Sensors Technology Corporation, opened in 1995 in Japan, supports the large Japanese market for accurate position sensors. This facility provides local distribution and application assistance for the entire Temposonics product line. 2
3 D I M E N S I O N S TYPICAL PRODUCT INSTALLATIONS Rigid Sensor Pipe Flexible Sensor Pipe Typical: 3.75 in. (95.3 mm) 3/4 in. NPT Fitting 1 in. NPT Adjustable Fitting Tank Flange (provided by customer) Tank Flange (provided by customer) Riser Riser Stainless Steel Flexible Sensor Product Float Tip of Transmitter Interface Float Bottom-fixing weight, magnet, or hook Sanitary Sensor Pipe Sanitary Clamp (customer Factory Supplied Pigtail Cable (15 ft.) Sanitary Process Connnection, Sanitary Cap Top Mating Process Connection (customer supplied) Riser Sanitary Float (permanently mounted- Dependent on end plug style) Tip of Transmitter 3
4 D I M E N S I O N S SENSOR PIPE OPTIONS There are three sensor pipe styles: rigid, flexible, and sanitary. The rigid sensor pipe style comes with the end-plug style shown. Flexible pipe can be ordered with bottom-fixing hook, weight, or magnet. Sanitary pipes have several end-plug styles as shown below. Please note that some styles require permanently mounted floats floats cannot be removed. Rigid Pipe Flexible Pipe 1 in. NPT Adjustable Compression Fitting, 3/4 in. NPT justable Fitting 3.75 in. (95.3 mm) Typical 12 in. (304.8 mm) 27.0 in. (685.8 mm) Tank Flange Tank Flange Order Length Pipe diameter (0.625 in. dia.) mm Order Length Outer Pipe (316L Stainless Steel) 2.9 in. (73.7 mm) (Typical) Inactive Zone Tip of transmitter 3.0 in. (76.2 mm) Inactive Zone (Typical) 3.0 in. ( in. (typ) (50.8 mm) 5.0 in. (127 Sanitary Pipe Bottom-fixing Bottom-fixing Bottom-fixing 1.9 in. (48.3 mm) Typical Sanitary Process Connnection (Sanitary Cap) Note: For simplified ordering, go to and use our online Interactive Application Worksheet. Pipe diameter (0.625 in. dia.) Constructed of 316L stainless steel Sanitary End-plug Styles Order length Inactive Zone: 3.2 in. (81.28 mm) from tip (Typical) Inactive Zone: 2.9 in. (73.66 mm) from tip (Typical) Inactive Zone: 3.2 in. (81.28 mm) from tip (Typical) Inactive Zone: 2.9 in. (73.66 mm) from tip (Typical) TB Sanitary* DP Drain-in-place w/end plug* CP Clean-in-place DN Drain-in-place, no through hole * This end plug style has permanently mounted floats floats cannot be removed from pipe. 4
5 H O W T O O R D E R Use the guide below to build model numbers for the M-Series gauges. Model numbers are required to place orders and are helpful in identifying installed products. M R A 1 S , 14, 15, 16, ) MODEL M = Magnetostrictive Gauge 2) TYPE R = Transmitter 3) INPUT POWER A = 24 Vdc, 2-wire loop (intrinsically safe) 4) OUTPUT 1 = 4-20 ma Single Loop w/hart 2 = 4-20 ma Dual Loops w/hart Note: Contact factory for magnetic level gauge applications. 5) HOUSING TYPE A = NEMA 4X, 316L Stainless Steel w/ NPT and cable (Intrinsically safe only) B = Single Cavity (Explosionproof and intrinsically safe) C = Dual Cavity (Explosionproof and intrinsically safe) D = Single Cavity with display (Explosionproof and intrinsically safe) E = Dual Cavity with display (Explosionproof and intrinsically safe) L = NEMA 4X, 316L SS w/6-pin male connector (Intrinsically safe only) 3 = NEMA 4X, 316L Stainless Steel w/ NPT and internal terminal blocks (Intrinsically safe only) 6) ELECTRONICS MOUNTING 1 = Integral Electronics 9) PROCESS CONNECTION TYPE 1 = NPT, Adjustable 3 = NPT, Welded 4 = Sanitary, Welded (Stainless Steel Only) 5 = Sanitary, Adjustable (Stainless Steel Only) 6 = 150# Welded RF Flange 7 = 300# Welded RF Flange 8 = 600# Welded RF Flange X = None 10) PROCESS CONNECTION SIZE A = 3/4 in. (NPT only) B = 1 in. (NPT only) C = 1 1/2 in. D = 2 in. E = 2 1/2 in. F = 3 in. G = 4 in. H = 5 in. (except sanitary) J = 6 in. X = None 11) RTD 0 = None 1 = One RTD, fixed position (3 inches from tip of gauge) 2 = One RTD, customer defined position (If Option 2 is selected, then 17 E must also be selected) 7) SENSOR PIPE B = Industrial end-plug w/stop collar C = Sanitary, T-bar, TB, (Stainless Steel Only) D = Sanitary, drain-in-place, DP, (Stainless Steel Only) E = Sanitary, clean-in-place, CP, (Stainless Steel Only) F = Sanitary, drain-in-place, no hole, DN, (Stainless Steel Only) H = Flexible w/ bottom fixing hook (Stainless Steel Only) J = Flexible w/ bottom fixing weight (Stainless Steel Only) K = Flexible w/ bottom fixing magnet (Stainless Steel Only) 8) MATERIAL OF CONSTRUCTION (wetted parts) 1 = 316L Stainless Steel 2 = Electropolished 316L Stainless Steel Note: Contact factory for other materials 12) UNIT OF MEASUREMENT M = Metric - Millimeters ( _) U = US Customary - Inches ( _. ) 13, 14, 15, 16, 17) LENGTH = Order length based on unit of measurement. Encode length in inches if ordering in US Customary (XXX.XX in.), encode length in millimeters if using metric (XXXXX mm) Rigid sensor pipe: in. ( mm) Flexible sensor pipe: in. ( mm) 18) SPECIAL S = Standard Product 5
6 E N C L O S U R E D I M E N S I O N S The Level Plus M-Series is available with many options to suit your application. Some options are illustrated below to help in building a model number. ELECTRONICS HOUSING OPTIONS: There are three options: NEMA 4X enclosure, single chamber enclosure, and double chamber enclosure. The NEMA 4X enclosure is constructed of 316L stainless steel. The single and dual chamber enclosures may be ordered with or without a display and are explosionproof. 6.0 in. (152 mm) 4.85 in. (123 mm) NEMA 4X Enclosure 3.19 in. (81 mm) 4.85 in. (123 mm) Factory Supplied Pigtail Cable (15 ft.) Top View Single Chamber Enclosure 5 in. (127 mm) 5 in. (127 mm) 4.84 in. (123 mm) 3/4 in. NPT conduit access 8.25 in. (210 mm) 8.25 in. (210 mm) Optional Display 5 in. (127 mm) Dual Chamber Enclosure 5 in. (127 mm) 3.48 in. (88 mm) 6.95 in. (176 mm) 8.25 in. (210 mm) 8.25 in. (210 mm) Optional Display 3/4 in. NPT conduit access 6
7 S P E C I F I C A T I O N S PARAMETER SPECIFICATION LEVEL OUTPUT Measured Variable: Output: Full Range: Non-linearity: Repeatability: Sensor Operating Temperature: GAUGE LOOP Input Voltage Range: Reverse Polarity Protection: Lightening/Transient Protection: CALIBRATION Zero Adjust Range: Span Adjust Range: Liquid level, interface level, temperature 4-20 ma, 2 loops with HART Flexible Gauges: 120 to 480 in. (3050 to 12,192 mm) Rigid Gauges: 20 to 300 in. (508 to 7620 mm) Flexible Sensor Element: 0.035% F.S. (Independent BSL) or 1/32 in. (0.794 mm) Rigid Sensor Element: 0.020% F.S. (Independent BSL) or 1/32 in. (0.794 mm) Flexible Sensor Element: 0.01% F.S. or in. (0.381 mm) Rigid Sensor Element: 0.005% F.S. or in. (0.127 mm) -40 to 257 F (-40 to 125 C) 10.5 to 36.1 Vdc Series diodes Stage 1: line-to-ground surge suppressors; 2500 Amps peak (8/20 µsec.) Stage 2: line-to-line and line-to-ground transient suppressors; 1500 Watts peak (10/1000 µsec.) Anywhere within the active length Full Scale 0.5 ft. (152 mm) from zero TEMPERATURE OUTPUT Type: 4-20 ma from 1,000Ω platinum RTD at 0 C Repeatability: ±0.18 F (0.1 C) Accuracy: ±2.7 F (±1.5 C) Drift: ± 0.9 F (0.5 C) per year Zero Adjust: -40 to 255 F (-40 to 124 C) Span Adjust: 45 F (7.2 C) minimum, full scale (maximum) = 300 F (149 C) ENVIRONMENTAL Humidity: Electronics Operating Temperature: Vessel Pressure: Materials (wetted parts): FIELD INSTALLATION Mounting: Wiring: DISPLAY (OPTIONAL) Measured Variables: Level 1, Level 2, temperature Update Rate: 3 second Size: 0.5 in. (12.7 mm) Number of Digits: 16 0 to 100% R.H., non-condensing -30 to 160 F (-34 to 71 C) Dependent on float pressure rating (275 psi max- flexible outer pipe) 316L stainless steel 3/4 in. NPT fitting or flange mounting 2-wire connection, shielded cable or twisted pair to screw terminals through a 3/4 in. NPT conduit opening NEMA 4X: 15 ft. (457 cm) pigtail integral cable or Daniel Woodhead (Part No SS) 6-pole Male 1/4 in.-18 MNPT key-way receptacle HART COMMUNICATIONS Method of Communication: Frequency Shift Keying (FSK) conforms with Bell 202 Modem Standard with respect to baud rate and digital 1 and 0 frequencies. Data Byte Structure: 1 Start bit, 8 Data bits, 1 Odd Parity bit, 1 Stop bit Digital Process Variable Rate: Poll/Response Model 2.0 per second AGENCY APPROVALS Intrinsically Safe : Explosionproof: Intrinsically Safe Canadian Standards (CSA) Class I, Groups A, B, C, D Class I, Groups B, C, D EEx ia IIB + T4 FM Global Class II, Groups E, F, G Class II, Groups E, F, G EEx ia IIA + T4 PTB/ATEX Division 1, NEMA 4X Division 1, NEMA 4X Models: All Models: Explosionproof housing req. (Consult Factory for PTB/ATEX model numbers) Whichever is greater. When installed with approved I.S. barriers. Contact factory for other materials. Contact factory for longer lengths. Length dependent. Contact factory for higher temperatures. Flexible sensor elements come standard with flexible pipes. Rigid sensor elements come standard with rigid pipes. A flexible sensor element is optional for a rigid pipe configuration. Contact factory for higher pressures. 7
8 A C C E S S O R I E S Rigid Standard Float, Part No X Max. Pressure: 400 psi, Max. Temperature: 300 ºF Part No. Ext. Material sg X=1 316L Stainless Steel 0.67 Critical Service Float, Part No X Max. Pressure: 425 psi, Max. Temperature: 300 ºF Part No. Ext. Material sg X=1 316L Stainless Steel 0.43 X=2 316L Stainless Steel in. (76.5 mm) Standard Float Part No X 1.85 in. dia. (47 mm) 0.70 in. dia. (17.8 mm) 3.57 in. (90.55 mm) Critical Service Float Part No X 3.50 in. dia (88.9 mm) 0.70 in. dia. (17.8 mm) Label, 3A Sanitary, Part No Sanitary Product Float, Part No X (3A certified) Max. Pressure: 150 psi, Max. Temperature: 300 ºF Part No. Ext. Material sg Surface Finish X=1 316L Stainless Steel GRIT/RA25 X=3 316L SS (Electropolished) GRIT/RA15 Outside surfaces only. Contact factory for other finishes. M-Series PC Setup Software MTS Part Numbers: : M-Series PC Setup Software on CD/Diskettes and HART Adapter : M-Series PC Setup Software on CD/Diskettes : HART to RS232 Adapter (SMAR HI-311) MTS Panel-Mounted Universal Process Meter (With 11 Point Linearization) MTS Part Numbers: : LED Display Universal Process Meter : LED Display Universal Process Meter with 2 relays (2 250 VAC SPDT) : LED Display Universal Process Meter with 4 relays (2 250 VAC SPDT) Enclosure Options: : NEMA 4 enclosure for one LED Display Meter : NEMA 4 enclosure for two LED Display Meters Standard 1/8 DIN, high-impact ABS plastic housing, NEMA 4X/IP65 front panel MTS Loop-Powered LCD Display Meter MTS Part Number Label, 3A Sanitary Part No FM Approved: Explosionproof, Class I, II, III; Division 1; Groups B-G Intrinsically Safe, Class I, II, III; Division 1; Groups A-G (when connected through the appropriate barrier) 4.25 in. (108 mm) 3.5 in. (89 mm) Product Float Part No X 1.85 in. dia. (47 mm) LEVEL P SIDE TANK INDICATOR 0.70 in. dia. (17.8 mm) Centerline of Magnet UNITED STATES MTS Systems Corporation Sensors Division 3001 Sheldon Drive Cary, NC Tel: Fax: level@mtssensors.com GERMANY MTS Systems Corporation Sensors Technologie Auf dem Schuffel 9, D Lüdenscheid, Germany Postfach 8130 D Lüdenscheid, Germany Tel: Fax: info@mtssensor.de JAPAN MTS Sensors Technology Corporation Ushikubo Bldg. 737 Aihara-cho, Machida-shi Tokyo , Japan Tel: + 81 (42) Fax:+ 81 (42) info@mtssensor.co.jp MTS is a registered trademark of MTS Systems Corporation. Level Plus is a registered trademark of MTS Systems Corporation. Printed in USA. Copyright 2004 MTS Systems Corporation. All Level Plus products are covered by US patent number 5,545,984. Additional patents are pending. All other trademarks are the property of their respective owners. Part Number: Revision F
R-Series Rod Model RS. Data Sheet. Model RS Rod-style sensor with IP68/IP69K Super Shield Housing. Interrogation Return wire.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors R-Series Rod Model RS SENSORS Document Part Number 551251 Revision A Data Sheet Model RS Rod-style sensor with IP68/IP69K Super
More informationTemposonics. Magnetostrictive Linear-Position Sensors. R-Series Model RP and RH Sensors Synchronous Serial Interface (SSI) Output D
Temposonics Magnetostrictive Linear-Position Sensors R-Series Model RP and RH Sensors Synchronous Serial Interface (SSI) Output Product Specification 550989 D Rugged industrial sensor Linear, absolute
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors E-Series Model EH Synchronous Serial Interface (SSI) Output Data Sheet SENSORS Document Part Number: 551314 Revision B Model
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. R-Series Models RP and RH Ethernet POWERLINK.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors R-Series Models RP and RH Ethernet POWERLINK SENSORS Document Part Number 551191 Revision A Data Sheet Model RP Profile-style
More informationTemposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. R-Series Models RP and RH DeviceNet Output.
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors R-Series Models RP and RH DeviceNet Output SENSORS Document Part Number 550651 Revision F Data Sheet Model RP Profile-style position
More informationANALOG. PARAMETER SPECIFICATION Measured Variable: Displacement, Velocity (magnitude only) 16 bit or mm, whichever is greater
T E M P O S O N I C S I I I ANALOG P r o d u c t S p e c i f i c a t i o n s F e a t u r e s Superior resolution and repeatability Absolute displacement and velocity measurement Modular, non-contacting
More informationSSI. Synchronous Serial Interface
T E M P O S O N I C S R S E R I E S SSI Synchronous Serial Interface P r o d u c t S p e c i f i c a t i o n s PARAMETER Measured Variable: Resolution: Non-Linearity: SPECIFICATION Displacement Up to 0.002
More informationTemposonics. M-Series Analog Redundant. Absolute, Non-Contact Positions Sensors. Temposonics MT Measuring length mm
Temposonics Absolute, Non-Contact Positions Sensors M-Series Document Part Number 551218 Revision D Temposonics MT Measuring length 50-1500 mm Redundant Sensor for Mobile Hydraulics Redundant Sensor System
More informationTemposonics. M-Series Analog. Magnetostrictive Position Sensors. Temposonics MH Measuring length mm SENSORS
Temposonics Magnetostrictive Position Sensors m SENSORS M-Series Temposonics MH Measuring length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, Absolute Measurement in Hydraulic Cylinders Contactless
More informationTemposonics. G-Series Analog Redundant. Magnetostrictive Position Sensors. Redundancy for enhanced safety
Temposonics Magnetostrictive Position Sensors m SENSORS G-Series Redundant Temposonics GT2 and GT3 Measuring length 25-1500 mm Redundancy for enhanced safety Up to 3 totally separated, independent measuring
More informationTemposonics. M-Series Analog. Absolute, Non-Contact Position Sensors. Temposonics MH Measuring length mm. Compact Sensor for Mobile Hydraulics
Temposonics Absolute, Non-Contact Position Sensors M-Series Temposonics MH Measuring length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, Absolute Measurement in Hydraulic Cylinders Contactless
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors M-Series Mobile Hydraulic in-cylinder Sensor Model MH CANopen, CAN J1939 Output Data Sheet SENSORS Document Part Number 551027
More informationCANBUS G. Up to mm ( in.) < ± 0.01% of full stroke or ± 0.04 mm ( in.), whichever is greater*
27295 8/11/03 T 7:42 AM Page 1 E M P O S O N I C S R S E R I E S CANBUS 550541 G P r o d u c t S p e c i f i c a t i o n s PARAMETER S P E C I F I C AT I O N Measured Variable: Resolution: Non-Linearity:
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors MH-Series Mobile Hydraulic in-cylinder Sensor Model MH Analog Output Data Sheet SENSORS Document Part Number 550824 Revision
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors MH-Series Model MB Mobile Hydraulic Sensor with Analog Output Data Sheet SENSORS Document Part Number 551284 Revision A MH-Series
More informationTemposonics. M-Series PWM. Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm. Document Number Revision B
Temposonics Absolute, Non-Contact Position Sensors M-Series Temposonics MH Measuring Length 50-2500 mm Document Number 551225 Revision B Compact Sensor for Mobile Hydraulics Linear, absolute Measurement
More informationTemposonics. E-Series Analog + Start / Stop. Magnetostrictive Position Sensors. Temposonics EP Measuring range mm / mm SENSORS
Temposonics Magnetostrictive Position Sensors m SENSORS E-Series Temposonics EP Measuring range 50-1500 mm / 50-3250 mm... innovative Sensor-Parameter Handling Linear, Absolute Measurment Contactless Sensing
More informationTemposonics. M-Series Analogue / SIL2* Absolute, Non-Contact Position Sensors. Temposonics MH Measuring Length mm
Temposonics Absolute, Non-Contact Position Sensors M-Series / SIL2* Temposonics MH Measuring Length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, absolute Measurement in Hydraulic Cylinders Non-Contact
More informationTemposonics. Magnetostrictive Linear Position Sensors. TH Analog Data Sheet
Temposonics ostrictive Linear Position Sensors TH Analog ATEX / IECEx / CEC / NEC / EAC Ex certified / Japanese approval Continuous operation under harsh industrial conditions Flameproof / Explosionproof
More informationTemposonics. Absolute, Non-Contact Position Sensors. MH Series. Temposonics MB Analog. Technical Data / Description
Temposonics Absolute, Non-Contact Position Sensors MH Series Technical Data / Description Document No. 551220 Revision E Compact Sensor for Mobile Hydraulics Linear, absolute Measurement in Hydraulic Cylinders
More informationTemposonics. Magnetostrictive Linear Position Sensors. TH CANbus Data Sheet
Temposonics ostrictive Linear Position Sensors TH CANbus ATEX / IECEx / CEC / NEC / EAC Ex certified / Japanese approval Continuous operation under harsh industrial conditions Flameproof / Explosionproof
More informationTemposonics. R-Series DeviceNet. Magnetostrictive Position Sensors. Intelligent Design. Temposonics RP and RH Measuring length mm SENSORS
Temposonics Magnetostrictive Position Sensors m SENSORS R-Series Temposonics RP and RH Measuring length 25-7600 mm Rugged Industrial Sensor Linear and Absolute Measurement LEDs for Sensor Diagnostic Contactless
More informationTemposonics. Absolute, Non-Contact Position Sensors. MH Series. Temposonics MH Analog /Digital. Technical Data / Description
Temposonics Absolute, Non-Contact Position Sensors MH Series Temposonics MH Analog /Digital Document Part Number 551308 Revision B Technical Data / Description Compact sensor for mobile hydraulics Designed
More informationTemposonics. Magnetostrictive Linear Position Sensors. TH Analog SIL 2 capable Data Sheet
Temposonics ostrictive Linear Position Sensors TH Analog SIL 2 capable ATEX / IECEx / CEC / NEC / EAC Ex certified / Japanese approval Continuous operation under harsh industrial conditions Flameproof
More informationTemposonics. MH-Series Analog Redundant. Absolute, Non-Contact Positions Sensors. Temposonics MT Measuring length mm
Temposonics Absolute, Non-Contact Positions Sensors MH-Series Document Part Number 551218 Revision F Temposonics MT Measuring length 50-2500 mm Redundant Sensor for Mobile Hydraulics Redundant Sensor System
More informationTemposonics Magnetostrictive Linear-Position Sensors
Temposonics ostrictive Linear-Position Sensors Sizing and Applying ostrictive Linear-Position Sensors Technical Paper SENSORS 551045 E ostrictive Linear-Position sensor with sensing rod and position magnet
More informationLevel Plus. Magnetostrictive Liquid Level Transmitters with Temposonics Technology. LP-Series SE Replacement Installation Manual
Level Plus Magnetostrictive Liquid Level Transmitters with Temposonics Technology LP-Series SE Replacement 1. Contact information United States General Tel: +1-919-677-0100 Fax: +1-919-677-2343 E-mail:
More informationPart No Rev. E
l T e m p o s o n i c s P o s i t i o n S e n s o r s a n d S y s t e m s Part No. 550033 Rev. E T emposonics II Position Sensors Installation & Instruction Manual 11-98 550055 Revision E GENERAL INFORMATION
More informationTemposonics. Absolute, Non-Contact Position Sensors. MH Series. Temposonics MH 200. Technical Data / Description. Compact sensor for mobile hydraulics
Temposonics Absolute, Non-Contact Position Sensors MH Series Temposonics Technical Data / Description Document Part Number 551405 Revision A Compact sensor for mobile hydraulics Designed for the mobile
More informationTemposonics. G-Series Analog or Start/Stop. Absolute, Non-Contact Position Sensors. Temposonics GP and GH Stroke length mm depends on output
Temposonics Absolute, Non-Contact Position Sensors G-Series Temposonics GP and GH Stroke length 50...7600 mm depends on output C GP GH Position ~ Time Output signal indicating to magnet's position Sensor
More informationTemposonics. Magnetostrictive Linear Position Sensors. MHRM Analog Data Sheet. For embedded or externally threaded installation
Temposonics ostrictive Linear Position Sensors MHRM Analog For embedded or externally threaded installation Sensor rod with Ø 7 mm or Ø 0 mm Resolution: ±0. mm typ. Compliant with EN 50-3- MEASURING TECHNOLOGY
More informationBULLETIN NO.ELEC IM121/10A Replaces IM121/09A
Mid-West Instrument BULLETIN NO.ELEC IM121/10A Replaces IM121/09A INSPECTION Model 121 Indicating Differential Pressure Switch / Transmitter Electrical: Installation and Operating Instructions Upon receipt
More informationENGINEERED LIQUID LEVEL SOLUTIONS
ENGINEERED LIQUID LEVEL SOLUTIONS MAGNA-SITE MAGNETIC LEVEL GAUGE OPERATING PRINCIPLE The KENCO Magna-Site Magnetic Liquid Level Gauge is used to determine the volume of liquid contained within a vessel.
More informationSeries Level-Trol Electronic Liquid Level Transmitters
0- Level-Trol Series 0- Series Level-Trol Electronic Liquid Level Transmitters W0-/IL Non-Interactive Zero and Span Adjustments; Dry Span Calibration Allows Field Recalibration without Removing Wiring
More informationAT100 Magnetostrictive Level Transmitter. High accuracy magnetostrictive liquid level transmitter K-TEK Products
Data sheet DS/AT100-EN Rev. S AT100 Magnetostrictive Level Transmitter High accuracy magnetostrictive liquid level transmitter K-TEK Products Features SIL2 certified IEC 61508* High accuracy:.01% of full
More informationTemposonics. Magnetostrictive Linear Position Sensors. MH-Series MH5 Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors MH-Series MH5 Analog Linearity < 0.04 % F.S. Resolution typ. ±0.1 mm Stainless steel housing 1. Product description and technology Temposonics sensors
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS ECO pressure and temperature compensated easy and cost effective installation of the sensor no pressure loss caused by the sensor no moving parts, i.e. maintenance
More information7330 Pro-Stik II Magnetostrictive Level System
Series 7330 PRODUCT MANUAL CONTINUOUS LEVEL CONTROLS 7330 Pro-Stik II Magnetostrictive Level System ABSOLUTE PROCESS CONTROL KNOW WHERE YOU ARE... REGARDLESS 1 7330 Pro-Stik II The BW Controls 7330 Series
More informationTemposonics ATEX. Magnetostrictive Linear Position Sensors. DATA SHEET High Pressure Housing (HPH) The Measurable Difference
Temposonics Magnetostrictive Linear Position Sensors DATA SHEET (HPH) ATEX The Measurable Difference PRECISION POSITION MEASUREMENT HPH This (HPH) is ATEX-IECEx as well as UL and cul approved for use in
More informationMasoneilan Series
Masoneilan 12300 Series Digital Level Transmitter & Controller Specification Data CU3000 02/02 Digital Level Measurement and Control Instrumentation Table of Contents General Description...2 Principle
More informationTemposonics Magnetostrictive Linear Position Sensors. Temposonics GB-Series Brief Instructions
Temposonics Magnetostrictive Linear Position Sensors Table of contents. Introduction...3 2. Safety instructions...4 2. Intended use...4 2.2 Forseeable misuse...4 2.3 Installation, commissioning and operation...5
More informationState-of-the-art viscosity monitoring
State-of-the-art viscosity monitoring The State-of-the-Art in Viscosity Monitoring In process environments, ensuring proper viscosity is a key success factor. You need an accurate, reliable, and durable
More informationTemposonics. Magnetostrictive Linear Position Sensors. MH-Series Flexible MH Installation Manual
Temposonics Magnetostrictive Linear Position Sensors MH-Series Flexible MH Operation Manual Table of contents 1. Introduction... 3 1.1 Purpose and use of this manual... 3 1.2 Used symbols and warnings...
More informationUltrasonic Two-Wire Point Level Control
Ultrasonic Two-Wire Point Level Control General Instructions The Ultrasonic Point Level Control indicates liquid presence/absence within a sensor cavity. Two piezoelectric crystals face each other across
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS LC pressure and temperature compensated flowmeter easy and cost effective installation of the senor no pressure loss caused by the sensor no moving parts, i.e.
More informationTransmitting Transducer. Gas/Air Velocity Range:
RNG Series Insertion-Style Gas Flow Meter The RNG Series meter is an insertion-style vortex shedding flow meter designed to offer high accuracy measurements over an extremely large flow range. The meters
More informationMid-West Instrument. Diaphragm Type Model 240. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 240/11 (SUPERSEDES BULLETIN NO. 240/06) Mid-West Instrument Diaphragm Type Model 240 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Field wireable
More informationMAGNETIC LEVEL GAUGES
MAGNETIC LEVEL GAUGES ARCHON S magnetic gauges are proven method to measure liquid levels. Our gauges are the safest and most economical way to measure and control your level requirements. They can be
More informationMid-West Instrument. Piston Type Model 220. Hazardous Locations. Indicating / Non-Indicating Differential Pressure Switch or Transmitter
BULLETIN NO. 220/11 (SUPERSEDES BULLETIN NO. 220/06) Mid-West Instrument Piston Type Model 220 Hazardous Locations Indicating / Non-Indicating Differential Pressure Switch or Transmitter Low cost piston
More informationTORRIX Magnetostrictive level sensor
TORRIX Magnetostrictive level sensor Precision Versatility Security Sensors & Systems Worldwide: www.fafnir.com FAFNIR Quality and Satisfaction Company: Based in Hamburg, Germany, FAFNIR GmbH has over
More information9900 Series Oval Flowmeter/Transmitter with SMART METER MANAGER
Design Specifications DS-9900 Revision 04 9900 Series Oval Flowmeter/Transmitter with SMART METER MANAGER 2-Wire loop powered flowmeter/transmitter 316 Stainless steel measuring unit Automatic temperature
More informationAdvantage Series Two-Wire ph/orp/pion Transmitter
Advantage Series Two-Wire / Transmitter Specification Type TB82 Features Simple menu programming (patent pending). On-line continuous sensor diagnostics. Fully programmable isolated output. Three standard
More informationSanitary RTDs and Temperature Transmitters
Sanitary RTDs and Temperature Transmitters Modular components provide maximum configuration flexibility Unique element-to-housing design eliminates exposed threads, lowers profile All stainless steel construction
More informationVORTEX IN-LINE FLOW METERS
VORTEX IN-LINE FLOW METERS Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, degrees out of phase
More informationModel 124 Filter Minder & Model 124
Installation & Maintenance Instructions Model 124 Filter Minder & Model 124 Indicating Differential Pressure Switch / Transmitter Reading Office Cutbush Park, Danehill, Lower Earley, Reading, Berkshire.
More informationVortex In Line Flow Meter
Vortex In Line Flow Meter Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, 0 degrees out of phase
More informationHydro-Flow 2200 Fixed Insertion Vortex Flow Meter
A trademark of Spirax Sarco, Inc. Hydro-Flow 2200 Fixed Insertion Vortex Flow Meter Description The Hydro-Flow Model 2200 fixed insertion vortex flow meter was designed specifically for water flow measurement,
More informationFigure 1: WPR2 Dimensions and Hardware
Installation and Operation Instructions WPR2 Series (Max. Line Pressure < 300 PSI) Wet to Wet Differential Pressure Ø0.200" 2.60" 4.47" 5.47" 5.28" 3.00" Precautions Figure 1: WPR2 Dimensions and Hardware
More informationTemposonics Magnetostrictive Linear Position Sensors. Temposonics E-Series Brief Instructions
Temposonics Magnetostrictive Linear Position Sensors Temposonics E-Series Table of contents 1. Introduction...3 2. Safety instructions...4 2.1 Intended use...4 2.2 Forseeable misuse...4 2.3 Installation,
More informationUTM10 Series Ultrasonic Transit-time Flowmeters
Page 1 of 5 TI-P197-01 MI Issue 1 UTM10 Series Ultrasonic Transit-time Flowmeters Description UTM10 ultrasonic flow and energy meters clamp onto the outside of pipes and do not make contact with the internal
More informationSanitary RTDs and Temperature Transmitters
SENSORS FOR FOOD AND LIFE SCIENCES. Product Information - SA/CT FOOD Sanitary RTDs and Temperature Transmitters Introduction Anderson-Negele s electronic temperature sensors combine our industry proven,
More informationMagnetic Float Level Indicator
Magnetic Float Level Indicator and By-Pass Level Indicator Magnetic Float Level Indicator The "Magnet Float Level Indicator" is composed of the float and sensing rod. As the float raised or lowered by
More informationProfibus-DP Output. Profibus-DP output: Standard Profibus-DP signal. Profibus Output
: Standard Profibus-DP signal Rugged fully closed design Linear, absolute measurement LEDs for sensor diagnostics Digital technology, stable and reliable Non-contact sensing technology Superior accuracy,
More informationLow Profile Insertion Vortex
Low Profile Insertion Vortex Product Features The same insertion meter can measure Steam, Gases or Liquids. Standardize on an insertion bar that can measure line sizes 2 24 Heavy Duty & Maintenance Free
More informationPMF4000 Series DESCRIPTION FEATURES APPLICATIONS MAXIMUM RATINGS MASS AIR FLOW SENSOR
DESCRIPTION PMF4000 features Posifa s third-generation thermal flow die, benefiting from the latest innovations in microfabrication. The sensor die uses a pair of thermopiles to detect changes in temperature
More informationAPG. Explosion Proof and Non-Incendive Magnetostrictive Level Sensors Series: MPX. Features
Explosion Proof and Non-Incendive Magnetostrictive Level Sensors Series: MPX The MPX Series Magnetostrictive Level sensor provides highly accurate and repeatable level readings in a wide variety of liquid
More informationLevel Measurement Point level measurement - RF Capacitance switches
Pointek CLS200 - Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level and material detection switch with optional rod/cable
More informationLTX RF LEVEL SENSOR. Instruction Manual
LTX RF LEVEL SENSOR Instruction Manual FOR MODELS LTX01, LTX02, LTX05 Intempco Document No: LTX - M01 Rev. 1 Issue Date: April 2005 LTX01 RF LEVEL SENSOR USER MANUAL Software Rev : Rev. Date : June 2004
More informationJUMO DELOS SI. Precision pressure transmitter with switching contacts and display. Application. Brief description. Key features.
Data sheet 405052 Page 1/10 JUMO DELOS SI Precision pressure transmitter with switching contacts and display Application Food & pharma CIP/SIP systems Machine and system construction Air conditioning and
More informationMobrey MLT100. Displacer Level Transmitter. Product Data Sheet February 2015 IP119, Rev CA. Level, contents or interface measurement transmitter
Product Data Sheet February 2015 IP119, Rev CA Displacer Level Transmitter Level, contents or interface measurement transmitter Direct or external chamber mounting 4 20 ma HART output ATEX Intrinsically
More informationSanitary Sensors. High Quality, Precision. Sanitary Sensors. THORNTON Leading Pure Water Analytics
THORNTON Leading Pure Water Analytics Sanitary Sensors Sanitary Sensors Temperature Sensors 3A Sanitary Turbine Flow Sensors Pressure Sensors Tank Level Sensors High Quality, Precision Sanitary Sensors
More informationHydro-Flow Model 2200 Installation and Operation Guide B
Hydro-Flow Model 2200 Installation and Operation Guide 5700507-B Contents: Understanding and Identifying Your Flow Meter 1 Installing Your Flow Meter 3 Making Electrical Connections. 7 Mechanical and Electrical
More informationG2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
More informationHot Tap Insertion Vortex
Hot Tap Insertion Vortex Product Features The same insertion meter can measure Steam, Gases or Liquids. Standardize on an insertion bar that can measure line sizes 2 48 Heavy Duty & Maintenance Free Design
More informationPIT, PIF & PIX. Features. Pressure-to-Current Transmitters
R, PIF & PIX May 2010 Description Moore Industries family of pressure-to-current transmitters provide an economical solution when a pneumatic device must interface with a data acquisiton/control system,
More information1100 Series Piston Type Differential Pressure Gauges
1100 Series Piston Type Differential Pressure Gauges 1. Safety Before installing, check the Series Number and verify compatibility to the process media and temperature in contact with the wetted parts.
More informationWARNING! READ BEFORE INSTALLATION
A4 INTRINSICALLY SAFE & NON-INCENDIVE RATED PRESSURE TRANSMITTER INSTRUCTION SHEET WARNING! READ BEFORE INSTALLATION 1. GENERAL: A failure resulting in injury or damage may be caused by excessive overpressure,
More information1000 Series Piston Type Differential Pressure Gauges
1000 Series Piston Type Differential Pressure Gauges 1. Safety Before installing, check the Series Number and verify compatibility to the process media and temperature in contact with the wetted parts.
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationLevel Measurement. Continuous level measurement - Capacitance transmitters SITRANS LC500. 5/282 Siemens FI Overview.
SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse frequency shift capacitance level
More informationLevel instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. icenta Controls Ltd
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
More informationLow Cost, Low Maintenance Air, Compressed Air and Nitrogen Flow Measurement for Process and Plant Applications
FCI ST50 Series Flow Meters Low Cost, Low Maintenance Air, Compressed Air and Nitrogen Flow Measurement for Process and Plant Applications FCI ST50 FLOW METER Wastewater Treatment Aeration Control Blower
More information2100 Turbine Flow Sensor
200 Turbine Flow Sensor Description Engineered specifically for small pipe diameter applications, the Signet 200 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3
More informationVortex In Line Flow Meter
Principles of Operation Vortices are created when a fluid passes around a bluff body as shown below. Vortices are alternately shed on each side of the body, 0 degrees out of phase to each other, resulting
More informationISTEC MAGNETIC METERS
ISTEC MAGNETIC METERS MEASURE ANY CONDUCTIVE LIQUIDS OR SLURRIES (EVEN ABRASIVE OR CORROSIVE) WITH THE NEW MICROPROCESSOR-BASED MAGNETIC METER -- A QUALITY PRODUCT - SIMPLE - RELIABLE - AT AN AFFORDABLE
More informationElectromagnetic Flowmeters. Product Overview.
Electromagnetic Flowmeters Product Overview www.lcmeter.com Premier products, premier performance Liquid Controls offers a broad selection of electromagnetic (Mag) flow meters for industrial and water
More informationCANADA SENSORS TECHNOLOGY INC.
CANADA SENSORS TECHNOLOGY INC. Manufacturer of Advanced Technology Pressure & Level Transmitters LIQUID LEVEL TRANSMITTER PROCESS 10 HART Enabled Intrinsically Safe Model Submersible Pump Lift Station
More informationSmart Pressure Transmitter
DOC. NO.: C3100L-E16B Smart Pressure Transmitter with Diaphragm Seal MODEL APT3100L DUON System Co., Ltd. 298-29, GONDAN-RO, GUNPO-SI, GYEONGGI-DO, KOREA 15809 Tel : +82-31-3-6100 Fax : +82-31-29-7200
More informationTemposonics. Magnetostrictive Linear Position Sensors. DATA SHEET GBS Analog
Temposonics Magnetostrictive Linear Position Sensors DATA SHEET GBS Analog High pressure resistant sensor rod High operating temperature up to 100 C Flat & compact ideal for the valve market The Measurable
More informationSeries 1200A Magnetic Level Gauges, Transmitters and Switches
Series 1200A Magnetic Level Gauges, Transmitters and Switches A Superior Alternative Accurate and dependable in harsh applications Now with Schedule 40 chamber material as standard and brightly colored
More informationINSTRUMENTATION & CONTROL
Irrigation Controller.................... 172 Window Controller.................... 174 Water Meter Controller.................. 176 Digital Level Switch.................... 177 Filtration Controller Set..................
More informationAutomated Precision Weighing
Automated Precision Weighing Designed for Automation in Hazardous Environment, Zone 2 High Precision Designed to meet the most demanding customer specifications. The WMS is a high speed high accuracy weigh
More informationABB Instrumentation. 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use. Specification sheet
Specification sheet 50T Series Transmitters Model 54G/A gauge/absolute pressure transmitter for sanitary use Ranges : - 100 to 4000 kpa - 1 to 40 bar - 14.5 to 600 psi Base accuracy : 0.2%(BFSL) Piezoresistive
More informationDUST ALERT BinMaster Price Book binmaster.com Subject to change without notice 1
DUST ALERT - 3000 BinMaster Price Book 01-2019 binmaster.com Subject to change without notice 1 DUST ALERT - 3000 Dust Alert - 3000 The Dust Alert with integrated electronics and sensing probe utilizes
More informationLevel Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. 4/18 Siemens FI Overview.
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
More informationA Higher Level of Performance. Data Sheet. Centurion. Guided Radar. CGR Series. For more information, please visit >
A Higher Level of Performance Data Sheet Centurion Guided Radar CGR Series For more information, please visit > www.hawkmeasure.com / Dimensions Centurion Guided Wave Radar Radar Principle of Operation
More informationETP80. Electronic Transmitter for Pressure, Differential Pressure and Level
ETP80 Electronic Transmitter for Pressure, Differential Pressure and Level The ETP80 is a series of pressure transmitters with a wide range of s to suit most applications. The transmitters can measure
More informationRange of Ultrasonic Flowmeters.
Range of Ultrasonic Flowmeters www.adeptfluidyne.com Ultrasonic Flowmeter Series 6700 Working Principle The Transit Time Flowmeter utilises two transducers that function as both, ultrasonic transmitters
More informationMetal tube variable area flowmeter for gases, liquids and steam
Metal tube variable area flowmeter for gases, liquids and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h, kg/h, t/h,
More information