R1 R4, R15, R21 R24, R35 R5 R8, R11, R12, R25 R28, R31, R32 R9, R10, R29, R30 R13, R14, R33, R34 TP1, TP3, TP5, TP6, TP11, TP21, TP26, TP31
|
|
- Jeffrey Berry
- 6 years ago
- Views:
Transcription
1 MAX/MAX7 Evaluates: MAX/MAX7 General Description The MAX/MAX7 evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the MAX/MAX7 charger detectors. The EV kit features a USB-powered option and easy LED reading for logic outputs. Ordering Information appears at end of data sheet. Benefits and Features Evaluates Charger Detection Function No External Power Supply Required Proven PCB Layout Independent Layouts for MAX and MAX7 Separate Layout with No MAX/MAX7 for Verifying Insertion Loss Fully Assembled and Tested Component List DESIGNATION QTY DESCRIPTION C, C, C, C7, C, C, C7 7 C C, C C, C C8, C9, C8, C9 µf ±0%, V XR ceramic capacitors (00) Taiyo Yuden GMK07BJ0KA-T µf ±0%,.V X7R ceramic capacitor (00) Murata GRM88R70J0KA0D.µF ±0%, V XR ceramic capacitors (00) TDK C08XRVK080AC.7µF ±0%,.V XR ceramic capacitors (00) TDK C08XR0J7M080AB 0.µF ±0%, 0V XR ceramic capacitors (00) Murata GRM0RA0K J, J, J USB A connectors Amphenol UE7AC00 J, J, J7 Micro B USB connectors Hirose ZXD-B-P8 J USB B connector Molex JP, JP -pin single-row headers JP JP, JP JP 8 -pin single-row headers DESIGNATION QTY DESCRIPTION LED, LED, LED, LED LED, LED, LED, LED LED, LED R R, R, R R, R R R8, R, R, R R8, R, R R9, R0, R9, R0 R, R, R, R TP, TP, TP, TP, TP, TP, TP, TP TP, TP, TP, TP, TP TP0, TP TP, TP, TP, TP TP0 Green LEDs OSRAM LG N97-KN- Yellow LEDs Chicago CMD-VYC/TR8 Red LEDs Lite-on LTST-C0CKT 0 kω ±% resistors (080) 00kΩ ±% resistors (080) 0Ω resistors (080) MΩ ±% resistors (080) 8 Red test points Black test points 9-80; Rev 0; 9/
2 MAX/MAX7 Evaluates: MAX/MAX7 Component List (continued) DESIGNATION QTY DESCRIPTION TP7 TP0, TP, TP7 TP0, TP U U, U 0 White test points USB charger detector (0 Ultra TQFN) Maxim MAXEVB+ (Top Mark: ABE).V output LDOs ( SOT) Maxim MAX888EUT+ (Top Mark: AAHU) DESIGNATION QTY DESCRIPTION U, U7 Dual buffers (SC70 L) Fairchild NC7WZ07PX U, U8 Dual inverters (SC70 L) Fairchild NC7WZ0PX U USB charger detector (0 Ultra TQFN) Maxim MAX7EVB+ (Top Mark: ABG) 0 Shunts PCB: MAX/7 EVKIT Component Suppliers SUPPLIER PHONE WEBSITE Amphenol Chicago Miniature Lighting, LLC Fairchild Semiconductor Hirose Electric U.S.A., Inc Lite-On, Inc Molex Murata Americas OSRAM Opto Semiconductors Taiyo Yuden TDK Corp Note: Indicate that you are using the MAX/MAX7 when contacting these component suppliers. Maxim Integrated
3 MAX/MAX7 Evaluates: MAX/MAX7 Quick Start Required Equipment MAX/ MAX7 EV kit Computer USB-A male to USB-B male cable USB-A male to micro-b USB male cable USB flash drive (optional) Procedure The EV kit is fully assembled and tested. Follow these steps to verify board operation. ) Verify that all jumpers are in their default positions. ) Take USB-A male to USB-B male cable and connect the cable to J from a computer. ) Install a shunt on JP. Verify LED is on. ) Install a shunt on JP. Verify LED is on. ) Take USB-A male to micro-b USB male cable and connect the cable to J from a computer. Verify LED and LED are on. ) Optional: insert the USB flash drive in J. Check that the drive is accessible from computer. The drive should enumerate and register in Windows. 7) Remove the USB flash drive and cable on J. Remove the shunts on JP and JP. 8) Install a shunt on JP. Verify LED is on. 9) Install a shunt on JP. Verify LED is on. 0) Connect the micro-b USB cable to J from a computer. Verify LED and LED are on. ) Optional: insert the USB flash drive in J. Check that the drive is accessible from computer. The drive should enumerate and register in Windows. ) Remove USB flash drive and cable on J. Remove the shunts on JP and JP. Detailed Description of Hardware The MAX/MAX7 EV kit is a fully assembled and tested circuit board demonstrating the MAX and MAX7 charger detector ICs in a 0-pin surfacemount Ultra TQFN package. The EV kit circuit can be configured to evaluate the MAX or the MAX7 without an external power supply. There are LED indicators showing different logic outputs with different chargers attached. The EV kit also features a shorted USB path for board- and trace-only evaluation. Table. LED Indicator LED NAME DESCRIPTION MAX LED SW_OPEN LED is on when MAX SW_OPEN = low (switches are closed). LED CHG_DET LED is on when MAX CHG_DET = high. LED CHG_AL_N LED is on when MAX CHG_AL_N = low ( is valid and charging is allowed). LED VHC_GOOD LED is on when VHC is powered. LED GOOD_BAT LED is on when MAX GOOD_BAT is set to high. MAX7 LED SW_OPEN LED is on when MAX7 SW_OPEN = low (switches are closed). LED CHG_DET LED is on when MAX7 CHG_DET = high. LED CHG_AL_N LED is on when MAX7 CHG_AL_N = low ( is valid and charging is allowed). LED VHC_GOOD LED is on when VHC is powered. LED GOOD_BAT LED is on when MAX7 GOOD_BAT is set to high. Maxim Integrated
4 MAX/MAX7 Evaluates: MAX/MAX7 USB Transceiver Power The EV kit features jumpers to select the power source for the USB transceiver side. Install shunts in below position to change the power source. Logic Power Use JP, JP, JP, and JP to select power source for logic pins. They can be powered from the USB or external power supply. Use JP and JP to connect the pin to the of the micro-usb connector. GOOD_BAT Use JP and JP to connect GOOD_BAT to.v or ground. LED or LED is on when GOOD_BAT is set high. Table. USB Transceiver Jumper Selection JUMPER SHUNT POSITION DESCRIPTION MAX JP -* J is connected to J - J is connected to J MAX7 JP -* J is connected to J - J is connected to J *Default position. Table. Logic Power Jumper Selection JUMPER SHUNT POSITION DESCRIPTION MAX JP Installed VHC is connected to VEXT (TP) Not installed* VHC is not connected to VEXT (TP) JP Installed VHC is connected to J Not installed* VHC is not connected to J MAX7 JP Installed VHC is connected to VEXT (TP) Not installed* VHC is not connected to VEXT (TP) JP Installed VHC is connected to J Not installed* VHC is not connected to J *Default position. Maxim Integrated
5 MAX/MAX7 Evaluates: MAX/MAX7 Table. Jumper Selection JUMPER SHUNT POSITION DESCRIPTION MAX JP Installed* pin is connected to J Not installed pin is not connected to J MAX7 JP Installed* pin is connected to J Not installed pin is not connected to J *Default position. Table. GOOD_BAT Jumper Selection JUMPER SHUNT POSITION DESCRIPTION MAX JP Installed GOOD_BAT is high Not installed* GOOD_BAT is low MAX7 JP Installed GOOD_BAT is high Not installed* GOOD_BAT is low *Default position. Maxim Integrated
6 Maxim Integrated Evaluates: MAX/MAX7 MAX/MAX7 Figure a. MAX/MAX7 EV Kit Schematic UE7-AC-00 LED LED LED K R 00K LED K CHG_AL_N VHC R LED VHC R8 VHC ON_BAT GOOD_BAT 0 R9 VHC_GOOD JP JP ON_VB 00K R K JP R NC7WZ07PX 0V VHC SW_OPEN K 0.UF C8 00K 0.UF TP8 CHGD U R7.0UF V TP.V TP VB V.0UF R TP M TP H8 H7 JP R0 9 8 R R JP U C H0 J TP UF C ON_VEXT TP VEXT VEXT 00K 0 00K GBAT R TP0 VHC CHG_DET 0V R C9 K 00K JP TP7 NC7WZ0PX ID ND G MTHOLE ZXD-B-P8 M V.7UF.V MTHOLE MTHOLE.0UF ON_VIN MTHOLE MAX VB VHC VB VHC 0 MAX888EUT.0UF V SWOP CHGA U 7 R R TP TP TP8 TP TP TP TP TP9 TP7 H H H H H H H9 J C U U J C C7 C U JP TP9 TP0 TP TP TP9 TP0 C.UF S S D+ D- FB POK OUT IN SHDN CHG_DET CDN CDP GOOD_BAT CHG_AL_N TDP TDN SW_OPEN A Y VCC A Y A Y VCC A Y S S S S S S ID D+ D- IN IN
7 Maxim Integrated 7 Evaluates: MAX/MAX7 MAX/MAX7 Figure b. MAX/MAX7 EV Kit Schematic 9.0UF NC7WZ07PX TP7 VHC SWOP U8 CHGD TP8 NC7WZ0PX 0V 0.UF 00K R7 TP.0UF U 00K R R M R0 JP 0 TP7 R V VHC R 0 R 00K U7 C9 VHC CHG_DET TP0 GBAT R 00K U7 H UE7-AC-00 VHC JP JP R ON_VIN ON_BAT VB TP VHC R8 TP.UF C ON_VEXT JP TP JP 7 8 J J H H TP TP C7 TP C TP R C TP9 H U C TP8 TP 00K MAX888EUT CHGA V K V M ID V.0UF ZXD-B-P8 MAX7 0V K SW_OPEN K VHC_GOOD R VB ON_VB VHC 0.UF C8 GOOD_BAT JP U8 JP.7UF.V R TP VEXT K VHC CHG_AL_N LED R LED K 00K 0 R9 LED LED LED IN S S D+ D- S S S S S S ID D+ D- A Y VCC CHG_DET CDN CDP GOOD_BAT CHG_AL_N TDP TDN SW_OPEN A Y VCC A Y A Y FB POK OUT IN SHDN IN
8 MAX/MAX7 Evaluates: MAX/MAX7 S J H H H7 H8 J7 ZXD-B-P UE7-AC-00 S D- D+ D- D+ ID S S S S S S Figure c. MAX/ MAX7 EV Kit Schematic Maxim Integrated 8
9 MAX/MAX7 Evaluates: MAX/MAX7 Figure. MAX/MAX7 EV Kit Component Placement Guide Component Side Figure. MAX/ MAX7 EV Kit PCB Layout Component Side Maxim Integrated 9
10 MAX/MAX7 Evaluates: MAX/MAX7 Figure. MAX/ MAX7 EV Kit PCB Layout Layer Figure. MAX/ MAX7 EV Kit PCB Layout Layer Maxim Integrated 0
11 MAX/MAX7 Evaluates: MAX/MAX7 Figure. MAX/MAX7 EV Kit PCB Layout Solder Side Figure 7. MAX/MAX7 EV Kit Component Placement Guide Solder Side Maxim Integrated
12 MAX/MAX7 Evaluates: MAX/MAX7 Ordering Information PART MAX/7EVKIT# #Denotes RoHS compliant. TYPE EV Kit Maxim Integrated
13 MAX/MAX7 Evaluates: MAX/MAX7 Revision History REVISION NUMBER REVISION DATE DESCRIPTION PAGES CHANGED 0 9/ Initial release For pricing, delivery, and ordering information, please contact Maxim Direct at , or visit Maxim Integrated s website at. Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc. 0 Maxim Integrated Products, Inc.
S Fully Assembled and Tested
19-5591; Rev 0; 10/10 MAX9626 Evaluation Kit General Description The MAX9626 evaluation kit (EV kit) provides a proven design to evaluate the MAX9626 low-noise, lowdistortion, and high-bandwidth differential
More information+Denotes lead-free and RoHS compliant.
19-4165; Rev 0; 6/08 MAX9921 Evaluation Kit General Description The MAX9921 evaluation kit (EV kit) is a fully assembled and tested PCB that demonstrates the capabilities of the MAX9921 dual 2-wire Hall-effect
More informationEvaluates: MAX MAX16935 Evaluation Kit. General Description. Features and Benefits. Quick Start. Table 1. EN Configuration (JU1)
General Description The MAX16935 evaluation kit (EV kit) demonstrates the MAX16935 high-voltage, current-mode step-down converter with low operating current. The EV kit operates over a wide 3.5V to 36V
More informationMAX16929 Evaluation Kit Evaluates: MAX16929
19-5838; Rev 0; 4/11 MAX16929 Evaluation Kit General Description The MAX16929 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages and features required
More informationC13, C19, C20, C21, C30. Maxim Integrated Products 1
9-456; Rev 0; 0/04 MAX58 Evaluation Kit General Description The MAX58 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a step-up switching regulator, a
More informationMAX17020 Evaluation Kit. Evaluates: MAX17020
19-4132; Rev 0; 5/08 MAX17020 Evaluation Kit General Description The MAX17020 evaluation kit (EV kit) demonstrates the MAX17020 s standard application circuit. This dual Quick-PWM synchronous DC-DC converter
More informationMAX8622 Evaluation Kit Evaluates: MAX8622
General Description The MAX8622 evaluation kit (EV kit) is a fully assembled and tested circuit for evaluating the MAX8622 Xenon flash charger. The MAX8622 EV kit operates from a 2.5V to 5.5V supply, and
More information+Denotes lead(pb)-free and RoHS compliant. JU1 JU4 4
19-4381; Rev 0; 11/08 General Description The MAX8844Z evaluation kit (EV kit) is a fully assembled and tested PCB for evaluating the MAX8844Z/ MAX8844Y 28V linear Li+ battery chargers. The MAX8844Z EV
More informationGeneral Description. Features. Component List. Component Suppliers
General Description The MAX5062A evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the performance of the MAX5062A 60V, 300mA ultra-small, high-efficiency, synchronous
More informationMAX8686 Evaluation Kit Evaluates: MAX8686
General Description The MAX8686 evaluation kit (EV kit) provides a proven design to evaluate the MAX8686 single-phase, highefficiency, 25A, step-down regulator with integrated switches. The device is a
More informationEvaluates: MAX14746/MAX MAX14746 Evaluation Kit. Detailed Description of Hardware. General Description. Features
MAX7 Evaluation Kit Evaluates: MAX7/MAX77 General Description The MAX7 evaluation kit (EV kit) is a fully assembled and tested circuit for evaluating the MAX7/ MAX77 charger detectors with a linear battery
More informationEvaluates: MAX MAX44284 Evaluation Kit. General Description. Quick Start. EV Kit Contents. Features and Benefits. Required Equipment.
General Description The MAX44284 evaluation kit (EV kit) provides a proven design to evaluate the MAX44284 high-precision, lowpower, current-sense amplifier. This EV kit demonstrates the MAX44284 in an
More informationMAX1966 Evaluation Kit. Evaluates: MAX1966/MAX1967
9-; Rev 0; /0 MAX9 Evaluation Kit General Description The MAX9 evaluation kit (EV kit) is a fully assembled and tested circuit board that contains two independent step-down DC-to-DC converter circuits.
More informationMaxim Integrated Products 1
19-5287; Rev 0; 5/10 MAX9636 Evaluation Kit General Description The MAX9636 evaluation kit (EV kit) is an assembled and tested PCB used to evaluate the MAX9636 lowpower, low-noise, CMOS input op amp, which
More informationEvaluates: MAX MAX17244 Evaluation Kit. General Description. Quick Start. Features. Table 1. EN Configuration (JU1)
General Description The MAX744 evaluation kit (EV kit) demonstrates the MAX744 high-voltage, current-mode step-down converter with low operating current. The EV kit operates over a wide 6V to 36V input
More informationS 5.5V to 18V Operating Voltage Range S Up to 60V Fault Protection S Features Two On-Board 2-Wire Hall-Effect Sensors
19-5062; Rev 0; 11/09 MAX9621 Evaluation Kit General Description The MAX9621 evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the MAX9621 dual, 2-wire Hall-effect
More informationEvaluates: MAX17612C 4.5V to 60V, 250mA, Current-Limiter with Reverse Protection. MAX17612C Evaluation Kit. Quick Start. General Description.
Click here for production status of specific part numbers. General Description The MAX76C evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the MAX76C 4.5V to 60V,
More informationEvaluates: MAX MAX14874 Evalution Kit. General Description. Quick Start. Features. Recommended Equipment. Procedure
General Description The MAX87 evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX87 dual relay/valve/motor driver The EV kit operates from a single.5v to 6V supply
More informationMAX9643 Evaluation Kit Evaluates: MAX9643
General Description The MAX9643 evaluation kit (EV kit) is an assembled and tested PCB used to evaluate the MAX9643 60V, highspeed, precision, unidirectional current-sense amplifier. The EV kit features
More information+Denotes lead(pb)-free and RoHS compliant
9-44; Rev ; 0/0 MAX890A Evaluation Kit General Description The MAX890A evaluation kit (EV kit) is a fully assembled and tested circuit board for evaluating the A, -cell Li+ DC-DC battery charger. The EV
More informationMaxim Integrated Products 1
19-4002; Rev 2; 12/06 MAX6495 Evaluation Kit General Description The MAX6495 evaluation kit (EV kit) demonstrates a high-voltage overvoltage protection circuit for automotive applications that must survive
More informationFeatures. General Description. Component List
General Description The MAX17502F evaluation kit (EV kit) provides a proven design to evaluate the MAX17502F high-efficiency, highvoltage, synchronous step-down DC-DC converter. The EV kit uses the device
More informationEvaluate: MAX17502E in TDFN Package. MAX17502E Evaluation Kit. General Description. Features. Component List
General Description The MAX17502E evaluation kit (EV kit) provides a proven design to evaluate the MAX17502E high-efficiency, highvoltage, synchronous step-down DC-DC converter. The EV kit uses this device
More informationMAX16920B Evaluation Kit Evaluates: MAX16920A/MAX16920B
19-5744; Rev 0; 1/11 MAX16920B Evaluation Kit General Description The MAX16920B evaluation kit (EV kit) is an assembled and tested PCB used to evaluate the MAX16920B powermanagement IC for automotive radios,
More informationMaxim Integrated Products 1
9-740; Rev ; /04 General Description The MAX748 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a boost switching regulator and two charge-pump voltage-regulator
More information+Denotes lead-free and RoHS compliant.
9-0; Rev 0; 0/07 MAX866 Evaluation Kit General Description The MAX866 evaluation kit (EV kit) is a fully assembled and tested circuit board that evaluates the MAX866 power-management IC. The MAX866 integrates
More informationMAX1757/MAX1758 Evaluation Kits
9-86; Rev 0; 0/00 MAX757/MAX758 Evaluation Kits General Description The MAX757/MAX758 evaluation kits (EV kits) are assembled and tested PC boards that implement a step-down, switching lithium-ion (Li+)
More informationS +10V to +14V Input Range S 750kHz Switching Frequency S Output Voltages. S Greater than 94% Efficiency (Step-Up Switching Regulator)
19-5089; Rev 0; 12/09 MAX17122 Evaluation Kit General Description The MAX17122 evaluation kit (EV kit) is a fully assembled and tested surface-mount PCB that provides the voltages and features required
More informationEvaluates: MAX17682 for Isolated +12V Output Configuration. MAX17682 Evaluation Kit. General Description. Quick Start. Features. Recommended Equipment
General Description The MAX7 EV kit is a fully assembled and tested circuit board that demonstrates the performance of the MAX7 high-efficiency, iso-buck DC-DC Converter. The EV kit operates over a wide
More informationS Analog/PWM Input-Charge-Current Setting S Up to 1.2MHz Switching Frequency S Programmable Charge Current Up to 4A S Monitors Input/Outputs
19-4996; Rev 0; 10/09 General Description The MAX17015 evaluation kit (EV kit) is a complete, fully assembled and tested surface-mount PCB that features the MAX17015B highly integrated, multichemistry
More informationMAX40200 Evaluation Kit. Evaluates: MAX40200 Ideal-Diode in a 4-Bump WLP. General Description. Features
General Description The MAX40200 evaluation kit (EV kit) provides a proven design to evaluate the MAX40200 ideal-diode. This EV kit demonstrates the MAX40200 in a tiny, space-saving 4-bump wafer-level
More informationEvaluates: MAX17681A for Isolated +24V Output Configuration. MAX17681A Evaluation Kit. General Description. Quick Start. Features
General Description The MAX768AEVKITF is a fully assembled and tested circuit board that demonstrates the performance of the MAX768A high-efficiency, iso-buck DC-DC Converter. The EV kit operates over
More informationEvaluates: MAX MAX38888 Evaluation Kit. Quick Start. General Description. Features. MAX38888 EV Kit Files. Required Equipment.
Click here for production status of specific part numbers. MAX8888 Evaluation Kit Evaluates: MAX8888 General Description The MAX8888 evaluation kit (EV kit) evaluates the MAX8888 IC. The MAX8888 is a super
More informationEvaluates: MAX17612A 4.5V to 60V, 250mA, Current-Limiter with OV, UV, and Reverse Protection. MAX17612A Evaluation Kit.
Click here for production status of specific part numbers. General Description The MAX76A evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the MAX76A 4.5V to 60V,
More informationMaxim Integrated Products 1
19-4920; Rev 0; 8/09 MAX15046B Evaluation Kit General Description The MAX15046B evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate
More informationMAX5986A Evaluation Kit Evaluates: MAX5986A
19-6349; Rev 0; 5/12 MAX5986A Evaluation Kit General Description The MAX5986A evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet port, network powered-device
More informationMAX17498B Evaluation Kit Evaluates: MAX17498B
19-6293; Rev 0; 4/12 MAX17498B Evaluation Kit General Description The MAX17498B evaluation kit (EV kit) is a fully assembled and tested circuit board that contains an isolated 7W flyback DC-DC converter.
More informationMAX16840L Evaluation Kit Evaluates: MAX16840
19-5978; Rev 0; 7/11 MAX16840L Evaluation Kit General Description The MAX16840L low-power (5W input) evaluation kit (EV kit) demonstrates the MAX16840 HBLED driver IC used for Solid State Lighting (SSL)
More informationEvaluates: MAX38902A/B/C/D. MAX38902 Evaluation Kit. MAX38902 EV Kit Files. General Description. Quick Start. Features. Required Equipment
Evaluates: MAX890A/B/C/D General Description The MAX890 evaluation kit (EV kit) evaluates the MAX890A/B/C/D IC family of low noise linear regulators. The MAX890 EV kit features two independent circuits
More informationEvaluate: MAX17501H in TDFN Package
General Description The MAX17501H EV kit provides a proven design to evaluate the MAX17501H high-efficiency, high-voltage, synchronous step-down DC-DC converter in a TDFN package. The EV kit uses the MAX17501H
More informationMAX17019 Evaluation Kit Evaluates: MAX17019
General Description The MAX17019 evaluation kit (EV kit) presents the MAX17019 high input-voltage quad-output controller in a typical application setup. The EV kit operates from a 5.5V to 38V input range.
More informationEvaluates: MAX38903A/MAX38903B. MAX38903 TDFN Evaluation Kit. Quick Start. General Description. Features. MAX38903 TDFN EV Kit Files
Click here for production status of specific part numbers. General Description The MAX38903 TDFN evaluation kit (EV kit) evaluates the MAX38903A/MAX38903B IC family of low noise linear regulators. The
More informationEvaluates: MAX MAX40007 Evaluation Kit. Procedure. General Description. Features. Quick Start. Required Equipment
General Description The MAX47 evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate the MAX47 IC, offered in a space-saving 1.1mm
More informationMAX3747/MAX3747A Evaluation Kit
19-3297; Rev A; 05/04 MAX3747/MAX3747A Evaluation Kit General Description The MAX3747/3747A evaluation kit (EV kit) simplifies evaluation of the MAX3747/3747A limiting amplifiers. The EV kit enables testing
More informationEvaluates: MAX14775E/MAX14776E. MAX14775E Evaluation Kit. General Description. Features. Quick Start. Startup Procedure. Required Equipment
Click here for production status of specific part numbers. MAX4775E Evaluation Kit Evaluates: MAX4775E/MAX4776E General Description The MAX4775E evaluation kit (EV kit) is a fully assembled and tested
More informationEvaluates: MAX2248. MAX2248 Evaluation Kit. General Description. Features. EV Kit Photo
General Description The MAX2248 evaluation kit (EV kit) simplifies evaluation of the MAX2248 power amplifier (PA). It enables testing of the device s RF performance and requires no additional support circuitry.
More informationEvaluates: MAX17497A. MAX17497A Evaluation Kit. Features. General Description. Component List
General Description The MAX17497A evaluation kit (EV kit) demonstrates the MAX17497A controller IC offline AC-DC flyback converter design and features an integrated step-down regulator. The EV kit circuit
More informationEvaluates: MAX MAX31840 Evaluation Kit. Quick Start. General Description. Features. Required Equipment. Procedure. Test with AC or DC Source
General Description The MAX3840 evaluation kit (EV kit) demonstrates the MAX3840 LED driver IC used for dimmable V MR6 as well as AR and other V lighting applications. The EV kit is configured in a boost
More informationEvaluates: MAX MAX14914 Evaluation Kit. General Description. Features. MAX14914 EV Kit Board Photo
General Description The MAX494 evaluation kit (EV kit) provides a proven design to evaluate the MAX494, a configurable industrial digital output driver/digital input. The EV kit allows controlling of the
More informationS AC-Coupled I/Os for Ease of Testing S Fully Assembled and Tested S +3.3V Power-Supply Operation S On-Board 25MHz Crystal
19-5065; Rev 0; 12/09 E V A L U A T I O N K I T A V A I L A B L E MAX3677 Evaluation Kit General Description The MAX3677 evaluation kit (EV kit) is an assembled demonstration board that provides convenient
More informationMAX17222 Evaluation Kit Evaluates: MAX17220 MAX17225 General Description Quick Start Required Equipment Procedure
MAX7 Evaluation Kit Evaluates: MAX7 MAX75 General Description The MAX7 evaluation kit (EV kit) evaluates the MAX7 MAX75 IC family of ultra-low quiescent current step-up DC-DC converters. The MAX7 EV kit
More informationEvaluates: MAX5974C. MAX5974C Evaluation Kit. General Description. Features. EV Kit Efficiency vs. Output Current at V IN = 42V, 48V, and 57V
General Description The MAX5974C evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring the MAX5974C active-clamped, spread-spectrum, current-mode PWM controller
More informationEvaluates: MAX MAX17290 Evaluation Kit. General Description. Quick Start. Features. Required Equipment. Output Testing
MAX790 Evaluation Kit Evaluates: MAX790 General Description The MAX790 evaluation kit (EV kit) is a fully assembled and tested PCB that contains a 6W DC-DC boost converter for battery-operated, harsh environment,
More informationEvaluates: MAX17220 MAX MAX17222 Evaluation Kit. Quick Start. General Description. Features. Detailed Description of Hardware
MAX7 Evaluation Kit Evaluates: MAX7 MAX75 General Description The MAX7 evaluation kit (EV kit) evaluates the MAX7 MAX75 IC family of ultra-low quiescent current step-up DC-DC converters. The MAX7 EV kit
More informationPurpose. Table of Contents. Purpose Introduction General Product Information Key Performance Summary Table... 3
Purpose The RT7251B is a high-efficiency current mode synchronous step-down regulator that can deliver up to 1.5A output current from a wide input voltage range of 4V to 17V. This document explains the
More informationS AC-Coupled I/Os for Ease of Testing S Fully Assembled and Tested S +3.3V Power-Supply Operation S On-Board 25MHz Crystal SW13, SW15 SW4, SW6,
19-5173; Rev 0; 2/10 E V A L U A T I O N K I T A V A I L A B L E MAX3679A Evaluation Kit General Description The MAX3679A evaluation kit (EV kit) is an assembled demonstration board that provides convenient
More informationMAX712 Linear-Mode Evaluation Kit
9-2366; Rev ; /02 MAX72 Linear-Mode Evaluation Kit General Description The linear-mode evaluation kit (EV kit) is a complete battery charger for nickel metal hydride (NiMH) and fast-charge nickel-cadmium
More informationMAX6971 Evaluation Kit. Evaluates: MAX6971
9-676; Rev 0; /07 General Description The MAX697 evaluation kit (EV kit) provides a proven design to evaluate the MAX697 6-port, constant-current LED driver. The EV kit also includes Windows 000/XP/Vista
More informationEV2636-R-00A Full-Power-Management IC For Single-Cell Battery System
Full-Power-Management IC For Single-Cell Battery System DESCRIPTION The is the evaluation board designed to demonstrate the capabilities of MPS MP2636, a highly-integrated, flexible switch-mode battery
More informationDEMO MANUAL DC705A. LTC4053EMSE-4.2 Lithium-Ion Linear Battery Charger with Thermal Regulation. Description
Description LTC405EMSE-4. Lithium-Ion Linear Battery Charger with Thermal Regulation Demonstration circuit DC705 is a complete constantcurrent, constant-voltage battery charger designed to charge one Lithium-Ion
More informationPower Management Solution With 196 HVC ENYCAP TM for Mini Charger and Fixed Voltage Supply Board
VISHAY BCCOMPONENTS www.vishay.com Aluminum Capacitors By Gerald Tatschl MAL29699003E3 96 HVC ENYCAP TM - MINI CHARGER AND BACKUP BOARD DESCRIPTION The MAL29699003E3 mini charger and backup demonstration
More informationSpecifications are at T A = 25 C
Description Demonstration circuit 569 is a single cell Li-Ion linear charger in a SOT-. Charge rates as high as 600mA can be achieved due to the LTC 4054 s internal die temperature control loop that prevents
More informationPRODUCT DATASHEET AAT3681
General Description The BatteryManager is an integrated single cell lithium-ion/polymer battery charger IC, designed to operate from a DC power source or USB port up to an input voltage of 7.5V. It requires
More informationEV2456-J-00A 0.5A, 50V, 1.2MHz Step-Down Converter Evaluation Board
EV2456-J-00A 0.5A, 50V, 1.2MHz Step-Down Converter Evaluation Board DESCRIPTION The EV2456-J-00A is an evaluation board for the MP2456, a high-voltage step-down regulator with a built-in power MOSFET.
More informationISL80102, ISL80103 High Performance 2A and 3A LDOs Evaluation Board User Guide
ISL812, ISL813 High Performance 2A and LDOs Evaluation Board User Guide Description The ISL812 and ISL813 are high performance, low voltage, high current low dropout linear regulator specified at 2A and,
More informationMIC38300 Evaluation Board
3A HELDO High Efficiency Low Dropout Regulator General Description The MIC38300 is a 3A peak, 2.2A continuous current step down converter and the first device in a new generation of HELDO (High Efficiency
More informationSP6644/6645 Evaluation Board Manual
SP6644/6645 Evaluation Board Manual Easy Evaluation for the SP6644/6645 Single or Dual Cell Alkaline to 3.3V Output Provides up to 150mA output current for 2-Cell Input High Efficiency: 92% µsoic Package
More informationAAT A/1.0A USB Port/Adapter Lithium-Ion/Polymer Battery Charger
General Description Features BatteryManager The AAT3689 BatteryManager is a highly integrated single cell lithium-ion/polymer battery charger IC designed to operate with port and AC adapter inputs. It
More informationAssembly Manual for New Control Board 22 June 2018
Assembly Manual for New Control Board 22 June 2018 Parts list Arduino 1 Arduino Pre-programmed 1 Faceplate Assorted Header Pins Full Board Rev A 9 104 capacitors 1 Rotary encode with switch 1 5-volt regulator
More informationCE3152 Series. Standalone Linear LiFePO4 battery charger with Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS: PIN CONFIGURATION:
Standalone Linear LiFePO battery charger with Thermal Regulation Series INTRODUCTION: The is a complete constantcurrent constantvoltage linear charger for single cell LiFePO batteries. It s SOT package
More informationAAT A USB Port/Adapter Lithium-Ion/Polymer Battery Charger
General Description Features BatteryManager The AAT3690 BatteryManager is a highly integrated single-cell lithium-ion/polymer battery charger IC designed to operate with port and AC adapter inputs. It
More informationUM0672 User manual. CRX14 and CR14 reference design PCB Gerber files. Introduction
User manual CRX14 and CR14 reference design PCB Gerber files Introduction The purpose of this user manual is to give printed-circuit board references to ease design in the case of STMicroelectronics CRX14
More informationZSPM401x Application Note - Circuit Layout and Component Selection Contents
ZSPM401x Application Note - Circuit Layout and Component Selection Contents 1 Introduction... 2 2 Typical Application Schematic... 2 3 Printed Circuit Board (PCB) Layout Guidelines... 3 4 Recommended Bill
More informationAAT3693 PRODUCT DATASHEET. 1.6A Lithium-Ion/Polymer Battery Charger in 2.2x2.2 TDFN AAT3693. Features. General Description.
General Description The BatteryManager is a highly integrated single-cell lithium-ion/polymer (Li-Ion) battery charger which operates from a USB port, or an AC adapter input up to 7.5V input voltage. The
More informationAAT3683 PRODUCT DATASHEET. 1A Linear Li-Ion Battery Charger. Features. General Description. Applications. Typical Application
General Description The BatteryManager is a highly integrated single-cell lithium-ion / polymer (Li-Ion) battery charger that operates from a USB port or an AC adapter input up to an input voltage of 7.5V.
More informationSpeedster22i Capacitor User Guide UG051 April 10, 2015
Speedster22i Capacitor User Guide UG051 April 10, 2015 UG051, April 10, 2015 1 Copyright Info Copyright 2015 Achronix Semiconductor Corporation. All rights reserved. Achronix is a trademark and Speedster
More informationFigure 1. Evaluation Board Photos
STK554U3xx Series Evaluation Board User's Manual Introduction By using this board, STK554U3xx series (SIP1A / 3shunt) can be evaluated. EVAL BOARD USER S MANUAL Surface Figure 1. Evaluation Board Photos
More informationMP V, 1A, Li-lon, Linear Battery Charger with 10mA High Voltage LDO
The Future of Analog IC Technology DESCRIPTION The MP2631 is a linear, high performance single cell Li-Ion or Li-Polymer battery charger with 1mA LDO. By integrating high voltage input protection into
More informationIDC-136II-KIT 136kHz DC RX Assembly Guide
IDC-136II-KIT 136kHz DC RX Assembly Guide ICAS Enterprises May 2 nd,2016 The IDC-136II-KIT is a 136kHz direct conversion receiver. Most of the SDR software can be used with this receiver. It is quite easy
More informationBD99954MWV Evaluation Kit
ROHM Battery Charger Solutions BD99954MWV Evaluation Kit Contents Item No. Topic Page No. 1 Introduction 2 1.2 Description 2 1.3 Applications 2 1.4 Features 2 2 Evaluation Board Operating Limits and Absolute
More informationA4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
More informationICS1702EB. ICS1702 Evaluation Board. Table 1 Cells R6 R8 1 Open Short 2 2.0k 2.0k 3 1.0k 2.0k 4 1.0k 3.0k 5 3.0k 12k 6 2.0k 10k 7 2.0k 12k 8 1.3k 9.
ICS70EB ICS70 Evaluation Board General Description Galaxy Power, Inc.'s ICS70 Evaluation Board allows quick evaluation of the ICS70 Charge Controller for Nickel-Cadmium and Nickel-Metal Hydride Batteries.
More informationGENERAL DESCRIPTION. FEATURES 6A step-down power module
XR7906 April 06 GENERAL DESCRIPTION The XR7906 is part of a family of 40V synchronous step-down power modules combining the controller, drivers, inductor, passive components and MOSFETs in a single package
More information500mA USB Port or AC Adapter Li-Ion/Polymer Battery Charger General Description. Features BAT ADP. SKY83681A-x STAT ISET GND
General Description The BatteryManager is an integrated single cell lithium-ion/polymer battery charger IC, designed to operate from a DC power source or USB port up to an input voltage of 7.5V. It requires
More information800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery
800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery General Description The is a complete constant-current/constant- voltage linear charger for single cell lithium-ion
More informationLM3352 Regulated 200 ma Buck-Boost Switched Capacitor DC/DC Converter
Regulated 200 ma Buck-Boost Switched Capacitor DC/DC Converter General Description The LM3352 is a CMOS switched capacitor DC/DC converter that produces a regulated output voltage by automatically stepping
More informationPM-200 POWER SUPPLY MODULE v3.2 ASSEMBLY & INSTALLATION INSTRUCTIONS
PM-200 POWER SUPPLY MODULE v3.2 ASSEMBLY & INSTALLATION INSTRUCTIONS WARNING: Voltages inside the amplifier CAN & WILL KILL YOU! You MUST know how to work around HIGH VOLTAGE safely. If you do not, get
More informationez1081pre Mic Amplifier - Assembly manual [ Colourbook Issue 1]
ez1081pre Mic Amplifier - Assembly manual [ Colourbook Issue 1] ez1081pre Colourbook Contents. Section 1 - Colourbook assembly guide Section 2 - Setup and Calibration Section 3 - Schematics diagrams and
More informationPackage: RN: SOT23-5 TRN: TSOT23-5 Features: P: Standard (default, lead free) C: Customized. 1uF
FEATURES Programmable Charge Current Up to 8mA No MOSFET, Sense Resistor or Blocking Diode Required Preset 4.2V Charge Voltage with ±1% Accuracy Charge Current Monitor Output for Gas Gauging Thermal Regulation
More informationACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief
0 200 400 600 800 1000 1400 1200 5.5 FEATURES Dedicated Single Chip Solution for Mobile Power With Minimal Component Count 5V/1.5A Constant Output Current in Boost Mode 1.5A Switching Charger Programmable
More informationSP6121 Demo Board Manual
SP6121 Demo Board Manual FEATURES DC/DC Synchronous Buck Converter for Distributed Power Systems. SIP design provides complete, ready to use solutions for : Vin=3.0-7.0V Vout=1.25-5.0V I out=8.0a (no air
More informationLM5576 Evaluation Board
LM5576 Evaluation Board Introduction The LM5576 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the
More informationFeatures VIN AAT3693 STAT1 STAT2 ISET R SET GND
General Description The BatteryManager is a highly integrated single-cell lithium-ion/polymer (Li-Ion) battery charger which operates from a USB port, or an AC adapter input up to 7.5V input voltage. The
More information1.2A Single-chip Li-ion and Li-POL Charge
1.2A Single-chip Li-ion and Li-POL Charge General Description The LP28012 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its ESOP8 package and low
More informationALARM KIT ESSENTIAL INFORMATION. Version 2.0 WHAT CAN YOU PROTECT WITH THIS
ESSENTIAL INFORMATION BUILD INSTRUCTIONS CHECKING YOUR PCB & FAULT-FINDING MECHANICAL DETAILS HOW THE KIT WORKS WHAT CAN YOU PROTECT WITH THIS ALARM KIT Version 2.0 Build Instructions Before you start,
More informationCE3151 Series. Standalone Linear Li-Ion Battery Charger with Thermal Regulation
Standalone Linear Li-Ion Battery Charger with Thermal Regulation INTRODUCTION: The CE3151 is a complete constant-current/ constant voltage linear charger for single cell lithium-ion batteries. Its SOT
More informationEvaluates: MAX5995A/B/C/MAX5974D. MAX5995B Evaluation Kit. Features. General Description
lick here for production status of specific part numbers. General Description The MX99 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board featuring an Ethernet port, network
More informationQUICK START GUIDE FOR DEMONSTRATION CIRCUIT 551A-B LITHIUM-ION BATTERY CHARGER WITH CHARGE TERMINATION
DESCRIPTION LTC4002-8.4 Demonstration circuit 551A-B is a complete constant-current/constant- voltage battery charger designed to charge a two cell Lithium-Ion Battery. Programmed for 3A charge current,
More informationApplication Note. DA1468x Battery Charging AN-B-035
Application Note AN-B-035 Abstract This document describes the battery charging operation for a lithium-ion or lithium-polymer battery using the DA1468x device. Contents Abstract... 1 Contents... 2 Figures...
More informationAN5128 Application note
Application note STSPIN32F0/F0A - buck converter Enrico Poli Introduction The STSPIN32F0/F0A devices are systems in package providing a complete solution for 3-phase brushless motor driving applications.
More information