VP12 High Viscosity Piston Pump
|
|
- Angela Pearson
- 6 years ago
- Views:
Transcription
1 5252 East 36th Street North Wichita, KS USA TEL: FAX: VP12 High Viscosity Piston Pump Owner s Manual A Great Plains Ventures Subsidiary INSTALLATION INSTRUCTIONS Unpack and inspect all components. Inspect for any damage which may have occurred during shipping. If shipping damage is found, a claim should be filed with the carrier as soon as possible. Remove the two protective plugs from the inlet and outlet ports of the pump. Install Bung Adapter 1. Apply sealant (furnished) to the threads on one end of the bung adapter bushing. 2. Install onto tank or container and tighten snugly with a pipe wrench. To the owner: Congratulations on your purchase of the VP12 Pump. Your pump is manufactured in accordance with the highest standards. Following the operation and maintenance procedures provided in this manual will help you achieve years of dependable performance and trouble-free operation. Please read this manual carefully and keep for future use. 01/06 GENERAL INFORMATION!!! W A R N I N G!!! The GPI VP12 pump is for use with non-flammable fluids only. The pump should not be used for gasoline, diesel, other fuels, herbicides or chemicals. The VP12 has been designed for use with viscous petroleum products. Pump is not for use with flammable liquids. Install Suction Pipe 1. If using the adjustable suction pipe, apply thread sealer to threaded end of the suction pipe. 2. Insert gasket into the union nut on the bung adapter. 3. Insert the strainer into the suction pipe and thread suction pipe into the housing. A suction pipe can also be created using a 1 inch pipe with 1 in. NPT threads on one end. Proper length can be determined by inserting the threaded end through the bung adapter and down to the bottom of the tank. Mark the pipe even with top of bung adapter. Remove the pipe and cut off the pipe on the mark. NOTE: Be sure that pipe material is compatible with fluid. 1. Clean pipe of all foreign material and apply sealant to the threads. 2. Insert gasket into the union nut on the bung adapter and thread pipe into base of pump. 3. Tighten snugly with a pipe wrench. Install Pump and Suction Pipe Onto Tank 1. If using the adjustable suction pipe, extend suction pipe to full length. 2. Insert suction pipe, attached to pump, into the tank carefully. The suction pipe will telescope back to the proper length needed to rest on the bottom of the tank. 3. Thread union nut onto the bung adapter bushing and tighten union nut snugly with a pipe wrench. 1 Rev. A
2 4. If using a self-made suction pipe, insert the suction pipe attached to the pump into the tank. Thread the union nut onto the bung adapter bushing and tighten the union nut snugly with a pipe wrench. Install Hose, Nozzle and Optional Meter 1. Apply thread sealer to all threads. 2. Thread the hose adapter into the pump outlet port. 3. Install hose into the hose adapter. 4. Install optional meter. (If using an electronic meter, thread meter onto the discharge-end of hose.) NOTE: Flow direction is marked by an arrow on meter housing. 5. Thread the optional nipple into the meter and then install the nozzle onto nipple. NOTE: If optional meter is not used, simply thread hose into inlet end of nozzle. OPERATING PROCEDURES Turning On the Pump 1. The On / Off switch is located on the handle of the motor assembly. 2. To prevent motor and pump damage, do not operate pump in By-Pass mode (i.e., recirculation with nozzle closed) for more than 10 minutes. 3. Do not leave the pump running with fluids. Dry running causes damage to piston seals and other pump components. 4. Inspect pump wiring to ensure it is correctly attached to the battery and properly grounded. To avoid electrical shock, use extra care when connecting the pump system to the battery or power supply. 5. Pump is for use with viscous petroleum products only. Pump is not for use with flammable liquids. MAINTENANCE / STORAGE!!! C A U T I O N!!! Proper maintenance and storage will ensure a long pump life. Failure to follow the recommended cleaning and storage procedures will increase pump failures and void warranty. It is very important that the following procedures are followed to assure the reliable, trouble-free operation you expect from your GPI pump. If the pump system is not going to be used for an extended period of time, it is important that the pump be correctly flushed clean of all residue. These extra steps help avoid down time! Daily Care It is mandatory that the pump system always be kept full of liquids. Do not allow liquids to dry inside the pump. If this should happen, DO NOT START THE PUMP. Refer to Liquid Has Dried Inside Pump section for additional instructions. Each time the pump is used, visually check for leakage under the pump housing. A small drain hole will relieve any fluid which may by-pass around the pistons. If even a small amount of liquid is found, new seals are needed on the pistons. Refer to Assembly/Disassembly section for instructions. End of Season Care If the pump has been used for any fluid other than oil, flush the complete system as follows: 1. Remove pump from tank. 2. Insert inlet portion of pump into sufficient water supply to allow pump to run at least 10 to 15 minutes. NOTE: It may be easier to remove the suction pipe and attach a smaller inlet pipe. These steps will allow the complete pump system to be thoroughly rinsed. While flushing, open and close nozzle 15 to 20 times. This forces the dampener to open and close, insuring self-priming and clean internal components at next usage. NOTE: If the optional electronic meter is installed, the meter reading will change when flushed with the pump system. Flushing the meter is also essential to clean sticky fluids from rotor and housing. 3. Do not leave water inside the pump. Water deposits may form, causing the pump system to freeze-up. Refer to Liquid Has Dried Inside Pump section before turning the pump on. 4. Fill the entire system with a light motor oil by inserting inlet portion of pump into 3 or 4 quarts of oil. 5. Turn pump on, open the ball valve and allow oil to recirculate back into the container. While the pump is running, open and close the ball valve several times. Allow the pump to recirculate for a few minutes. 2
3 6. When completed, turn off pump and close the ball valve nozzle. Store pump indoors. 7. Check the camshaft assembly and the two bearings (top and bottom of camshaft) for proper grease. NOTE: See Assembly/Disassembly section for proper removal of camshaft. 8. If no grease is found, lubricate camshaft, bearings and all seals with a high-temperature lithium based grease. Check every 50 hours of operation thereafter. Liquid Has Dried Inside Pump!!! W A R N I N G!!! If liquid has dried inside of the pump, DO NOT start the motor. 1. Remove motor assembly and both end covers from housing. 2. Apply a penetrating lubricant such as WD-40 onto the pistons and piston liners in the housing. Allow to soak for several minutes. 3. After soaking, use a protective cloth and pliers or other gripping tool to carefully rotate the camshaft back and forth. This will free-up pistons prior to operating. 4. Remove and clean the poppet assembly following the instructions in the Assembly/Disassembly section. 5. Remove the two spacers and four valve cage assemblies from housing, noting relative positions. 6. Check the valve balls to be sure they are not sticking. 7. Reassemble above components only after they are free, clean and working properly. ASSEMBLY / DISASSEMBLY When disassembling your pump, carefully inspect all components for wear or damage. Replace as necessary to assure the reliable, trouble-free operation from your GPI pump. Refer to the list of Replacement Parts, Kits and Accessories found on the Illustrated Parts Drawing page. Motor Removal / Replacement 1. Loosen V-clamp retainer until T-bolt slips out of yoke. 2. Remove motor assembly and seal by sliding motor straight away from the pump housing. Be careful not to damage the seal. 3. Replace with new motor by first removing reduction gear (see following section). 4. Remove screws on motor cover and disconnect motor wires from switch. 5. Replace with new motor by reversing the procedure. Reduction Gearcase Removal / Replacement 1. Remove the four screws on the bottom of motor. 2. Slip reduction gear assembly off motor shaft. 3. When reassembling, do not overtorque (10 lb.-in. maximum). Switch Removal / Replacement 1. Remove the six screws from one side of plastic motor cover. 2. Disconnect the wires from the old switch and remove. Replace with new switch by reversing procedure. 3. When re-installing screws, tighten until snug; do not overtorque. Camshaft & Bearing Mount Assembly Removal / Replacement 1. Remove motor then remove the four screws from the bearing mount assembly. 2. Carefully slide bearing mount assembly from the camshaft assembly, noting the location of thrust washer for replacement. Check all bearings for wear and proper lubrication. NOTE: The bottom bearing is part of the housing and is not easily removed. Replacement of housing may be necessary if bearing is worn. Replace camshaft & bearing mount assembly as follows: 1. Lubricate camshaft, piston rod, all bearings, and lip seal in bearing mount assembly with high temperature lithium grease. 2. Align camshaft with bottom bearing, thrust washer and piston rod. 3. Rotate until camshaft slips into place, resting in the bottom bearing and in the slot of the piston rod. 4. Replace the bearing mount assembly onto the camshaft, carefully aligning the bearing mount assembly to prevent damage to the seal in the assembly. 5. Continue carefully working the bearing mount assembly until it slips onto the spline of the camshaft. 6. Replace the four screws retaining the bearing mount assembly and tighten to a snug fit (10-12 lb.-in torque). Do not overtighten. 3
4 Poppet Assembly Removal / Inspection NOTE: If the pump pulsates heavily during operation, cleaning of the dampener may be necessary. Some pulsation of the pump is normal. 1. Carefully remove poppet valve/plug, seal, and spring from the pump housing. NOTE: The poppet valve/plug retains the spring and support in a compressed state, so take care not to lose these components when the plug is loosened. 2. Remove the dampener from the housing with a slight back-and-forth motion. Wash the entire poppet assembly in warm soapy water. NOTE: The dampener should not be taken apart. 3. While washing the dampener, push in and rotate the plug to be sure the spring and plug are free and clean of residue. 4. Rinse and reinstall the entire poppet assembly. Tighten to a snug fit. Valve Gage Assemblies Removal / Replacement 1. Remove seven bolts and washers on each side of the end covers. Note the position of the valve cage assemblies and the two spacers for proper replacement. 2. Carefully remove the valve cage assemblies and inspect for damage or residue. NOTE: The valve cage assemblies should not be taken apart. Pistons Removal / Replacement Removal and replacement of the pistons is somewhat involved, requiring a ring compressor (supplied with the Piston Assembly Kit). Damage to piston liners will require replacement of the housing. 1. To remove pistons, remove the screws on each side of the piston rod. 2. After removing both screws, pull the piston assemblies out of their respective sides. NOTE: Remove pistons only in this manner. If an attempt is made to pull the piston through the opposite side, or to remove the piston rod without first removing both pistons, one piston may become lodged in the center of the housing. 3. After removing the pistons, remove the camshaft by following the steps described in the Camshaft & Bearing Mount Assembly Removal/Replacement section. The piston rod may then be removed from the housing. 4. Inspect piston seals and piston rod for wear or damage. If either is evident, replace them. NOTE: Reverse this procedure to install piston rod, pistons and valve cage assemblies. Refer to Illustrated Parts Drawing for correct positioning of parts. 4
5 TROUBLESHOOTING SYMPTOM PROBABLE CAUSE CORRECTIVE ACTION A. LOW FLOWRATE 1. Leakage Check under pump for leakage through drain hole in bottom of pump housing assembly. 2. Poppet spring is weak Check and/or clean poppet assembly. Replace if necessary. Do not disassemble the dampener. 3. Suction pipe clogged or Check suction pipe for leaks or clogs. Clean or replace as damaged necessary. 4. Poor connections or Check for low battery voltage. low voltage 5. Damaged seal Check for worn piston seal. B. PUMP FAILS TO 1. System air leak Check for air leak in suction side of system and around all PRIME fittings, connections and suction pipe. 2. Sticking valve cage Check valve cage assemblies for sticking. assemblies 3. Poppet assembly is Check and/or clean poppet assembly. Replace components, damaged or binding as necessary. 4. Failed gearbox Check gearbox on the motor to see if it is turning. C. MOTOR OVERHEATS, 1. Poppet assembly is Check and/or clean poppet assembly. Replace components, STALLS WHEN damaged or binding as necessary. Do not disassemble the dampener. NOZZLE IS CLOSED, OR PULSATES 2. Suction pipe clogged or Check suction pipe for leaks or clogs. Clean or replace as EXCESSIVELY damaged needed. 3. Inlet screen clogged Check inlet screen for clogs. 4. Duty cycle too long Avoid excessive operating time. Duty cycle is 30 minutes ON, 30 minutes OFF. D. MOTOR WON T RUN 1. Poor connections Check battery connections. WHEN THE SWITCH IS TURNED ON 2. Electrical connections Check for blown fuse (replace with 20 amp fuse) or dead faulty battery. Check for faulty switch or motor. Replace if burned out. Contact factory for assistance troubleshooting switch or motor problems. 5
6 ILLUSTRATED PARTS DRAWING A A A Item No. No. Part No. Description Req d Housing Assembly Hose Adapter (Outlet port of Housing) VDC Motor Assembly Switch (not shown) End Cover...1 3A End Cover Seal, Motor Adapter V-Clamp Retainer (order ) Screw, 1/4-20 x 1/2" Bearing Mount Assembly Seal, Bearing Mount Camshaft Assembly...1 9A Bearing...1 9A Snap Ring Bearing (order Kit ) Washer, Thrust Seal, End Cover Hex Cap Screw, 1/4-20 x 7/8" Washer Piston Assembly Piston Rod Valve Cage Assembly Spacer Washer (order ) Screw, 1/4-20 x 1" (order ) Dampener Assembly Spring, Poppet Seal, Bypass Plug Plug, Dampener Seal, Lower Cover Nut * Lower Cover * Union Ring * Inlet Fitting (Internal By-Pass) Gasket Bushing, Tank Bung Adapter Back-up Ring Back-up Ring Hose, 1" x 12' Buna-N N31GM EDM (optional) Nipple, 1 in. Plastic (optional) Ball Valve Nozzle to 44 in. Adj. Suction Pipe Strainer Power Cord Assembly (not shown)... 1 * Order Assembly below. 37 Accessories and Kits Lower Cover Assembly (Internal By-Pass) Includes Item No s. 25, 27, 28 and 29 (1 each) Wet Seal Kit (Pump) Includes Item No s. 23 and 25 (2 each) and Bearing Mount Assembly Kit Includes Item No s. 4, 7 and 8 (1 each) Piston Assembly Kit Includes Item No s. 13, 14 and 15 (2 each) Motor Kit Includes 12 Volt DC Motor ( ) and Gear Box ( ) Motor Cover Kit Includes and Covers Calibration Container 5 Gallon (not shown). 6
7 SPECIFICATIONS Pump is designed for use with viscous petroleum products. DO NOT use with flammable liquids. 1. Lightweight, corrosion-resistant, durable, molded Nylon housing with built-in handle and convenient spin collar in. NPT inlet and outlet ports. 3. 1" x 12' Buna-N hose, ball valve nozzle, and adjustable plastic suction pipe. 4. VP12, 12 Volt DC model, comes with 20' - 14 ga. power cord with 20 Amp fuse and battery clips psi maximum working pressure. 6. Typical Duty Cycle of 30 minutes ON, 30 minutes OFF. The more viscous the fluid (cold/thick) the shorter the duty cycle. Use with fluids up to 2,000 centipoise viscosity. Flowrange up to 8 GPM (30 LPM). 7. The VP12 will pump viscous petroleum products at temperatures within the range of +40 F to +104 F. 8. Shipping weight (approx.): 25 lbs. PARTS AND SERVICE For warranty consideration, parts, or other service information, please contact your local distributor. If you need further assistance, contact the GPI Customer Service Department in Wichita, Kansas, during normal business hours. A toll free number is provided for your convenience To obtain prompt, efficient service, always be prepared with the following information: 1. The model number of your pump. 2. The serial number or manufacturing date code of your pump. 3. Part descriptions and numbers. Part information can be found on the Illustrated Parts Drawing page. For warranty work, always be prepared with your original sales slip or other evidence of purchase date. Please contact GPI before returning any parts. It may be possible to diagnose the trouble and identify needed parts in a telephone call. GPI can also inform you of any special requirements you will need to follow for shipping fuel dispensing equipment. CAUTION: Do not return the pump or parts without authority from the Customer Service Department. Due to strict government regulations, GPI cannot accept parts unless they have been drained and cleaned. 7
8 Limited Warranty Policy Great Plains Industries, Inc E. 36 th Street North, Wichita, KS USA , hereby provides a limited warranty against defects in material and workmanship on all products manufactured by Great Plains Industries, Inc. This product includes a 2 year warranty. Manufacturer s sole obligation under the foregoing warranties will be limited to either, at Manufacturer s option, replacing or repairing defective Goods (subject to limitations hereinafter provided) or refunding the purchase price for such Goods theretofore paid by the Buyer, and Buyer s exclusive remedy for breach of any such warranties will be enforcement of such obligations of Manufacturer. The warranty shall extend to the purchaser of this product and to any person to whom such product is transferred during the warranty period. The warranty period shall begin on the date of manufacture or on the date of purchase with an original sales receipt. This warranty shall not apply if: A. the product has been altered or modified outside the warrantor s duly appointed representative; B. the product has been subjected to neglect, misuse, abuse or damage or has been installed or operated other than in accordance with the manufacturer s operating instructions. To make a claim against this warranty, contact the GPI Customer Service Department at or Or by mail at: Great Plains Industries, Inc E. 36 th St. North Wichita, KS, USA The company shall, notify the customer to either send the product, transportation prepaid, to the company at its office in Wichita, Kansas, or to a duly authorized service center. The company shall perform all obligations imposed on it by the terms of this warranty within 60 days of receipt of the defective product. GREAT PLAINS INDUSTRIES, INC., EXCLUDES LIABILITY UNDER THIS WARRANTY FOR DIRECT, INDIRECT, INCIDENTAL AND CONSEQUENTIAL DAMAGES INCURRED IN THE USE OR LOSS OF USE OF THE PRODUCT WARRANTED HEREUNDER. The company herewith expressly disclaims any warranty of merchantability or fitness for any particular purpose other than for which it was designed. This warranty gives you specific rights and you may also have other rights which vary from U.S. state to U.S. state. Note: In compliance with MAGNUSON MOSS CONSUMER WARRANTY ACT Part 702 (governs the resale availability of the warranty terms) East 36th Street North Wichita, KS USA TEL: FAX: GPI and the electric gear pump are registered trademarks of Great Plains Industries, Inc. A Great Plains Ventures Subsidiary GREAT PLAINS INDUSTRIES, INC., Wichita, KS Printed in U.S.A. 01/06 Rev. A
P-200 Plastic Utility Pump for Petroleum Products
P-200 Plastic Utility Pump for Petroleum Products Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 A Great Plains Ventures Subsidiary www.gpi.net
More informationG8 Portable Fuel Transfer Pump Owner s Manual
G8 Portable Fuel Transfer Pump Owner s Manual GENERAL INFORMATION This pump is designed for use only with gasoline (up to 15% alcohol blends such as E15), diesel fuel (up to 20% biodiesel blends such as
More informationHP-100 Dual-Flo Petroleum Hand Pump
5252 East 36th Street North Wichita, KS US 67220-3205 TEL: 316-686-7361 FX: 316-686-6746 HP-100 Dual-Flo Petroleum Hand Pump Owner s Manual Great Plains Ventures Subsidiary www.gpi.net 1-800-835-0113 TBLE
More informationS T O P. Oil Pump. Models L 5016, L 5116 and L Owner s Manual DO NOT RETURN THIS PRODUCT TO THE STORE! SAVE THESE INSTRUCTIONS TABLE OF CONTENTS
SAVE THESE INSTRUCTIONS Oil Pump Models L 5016, L 5116 and L 5132 Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 A Great Plains Ventures Subsidiary
More informationProduct Owner s Manual. 8 GPM / 30 LPM, 12-volt Fuel Transfer Pump. Model G8P
Product Owner s Manual EN 8 GPM / 30 LPM, 12-volt Fuel Transfer Pump Model G8P 05/2017 922130-01 Rev. A THANK YOU STATEMENT GOES HERE: Please save these instructions for future reference. Read carefully
More informationSTOP. Oil Pump Models L 5016, L 5116 & L Owner s Manual DO NOT RETURN THIS PRODUCT TO THE STORE! SAVE THESE INSTRUCTIONS TABLE OF CONTENTS
SAVE THESE INSTRUCTIONS 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 Oil Pump Models L 5016, L 5116 & L 5132 Owner s Manual STOP DO NOT RETURN THIS PRODUCT
More informationOil Pump Models L 5016, L 5116 & L 5132
SAVE THIS OWNER S MANUAL Oil Pump Models L 5016, L 5116 & L 5132 Owner s Manual DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact GPI before returning any product. If you are missing parts or experience
More informationSTOP. LP-50DEF-BRL Lever Hand Pump System Barrel Mounting. Owner s Manual DO NOT RETURN THIS PRODUCT TO THE STORE! SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS LP-50DEF-BRL Lever Hand Pump System Barrel Mounting Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 316-686-7361 FAX: 316-686-6746 800-835-0113 www.gpipumps.net
More informationSTOP. M-150S-Methanol Pump Owner s Manual SAVE THESE INSTRUCTIONS DO NOT RETURN THIS PRODUCT TO THE STORE! TABLE OF CONTENTS
SAVE THESE INSTRUCTIONS 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 M-150S-Methanol Pump Owner s Manual STOP DO NOT RETURN THIS PRODUCT TO THE STORE! Please
More informationEZ-8 & EZ-8 METHANOL FUEL PUMP
EZ-8 & EZ-8 METHANOL FUEL PUMP OWNER S MANUAL DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact Great Plains Industries, Inc. before returning any product. If you are missing parts, or experience
More informationILLUSTRATED PARTS LIST
ILLUSTRATED PARTS LIST 14 13 12 M-3130-RDP ONLY 33 11 9 10 15 8 1 2 3 16 5 17 6 7 22 29 30 4 28 26 32 18 31 19 20 21 23 25 27 24 Item No. No. Part No. Description Req d. 6 1 904006-38 Hex Head Screw 3/8-16
More informationTURBINE HOUSING. Commercial Grade. Owner s Manual Includes Aluminum and Nylon
Commercial Grade TURBINE HOUSING Owner s Manual Includes Aluminum and Nylon 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 1-888-996-3837 09/11 Rev. B 920789-01
More informationPVDF TURBINE HOUSING
Industrial Grade PVDF TURBINE HOUSING Owner s Manual Turbine shown here with Computer Electronics which are sold separately. 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX:
More informationM-1115S Series Fuel Pump
SAVE THESE INSTRUCTIONS 5252 East 36th Street North W ichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 M-1115S Series Fuel Pump Owner s Manual TABLE OF CONTENTS General Information...2 Installation...3
More informationMR 5-30 Aviation Fuel Meter Owner s Manual
SAVE THESE INSTRUCTIONS 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 MR 5-30 Aviation Fuel Meter Owner s Manual TABLE OF CONTENTS General Information... 2
More informationSTOP. M-3130 & M-3130-RDP Series. 115/230 Volt Super Duty Fuel Pumps. Owner s Manual. M-3130-PO Pump Only DO NOT RETURN THIS PRODUCT TO THE STORE!
SAVE THESE INSTRUCTIONS M-3130 & M-3130-RDP Series 115/230 Volt Super Duty Fuel Pumps M-3130-ML Manual Nozzle M-3130-PO Pump Only Owner s Manual STOP DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact
More informationM-3130 & M-3130-RDP Series 115/230 Volt Super Duty Fuel Pump M-3130-ML Manual Nozzle M-3130-AL Automatic Nozzle M-3130-PO Pump Only Owner s Manual
SAVE THESE INSTRUCTIONS M-3130 & M-3130-RDP Series 115/230 Volt Super Duty Fuel Pump M-3130-ML Manual Nozzle M-3130-AL Automatic Nozzle M-3130-PO Pump Only Owner s Manual 5252 East 36th Street North Wichita,
More informationSTOP. Contractor Special Fuel Pumps. Heavy Duty Fuel Pumps. Use this manual with: M-3425CS 24-Volt DC. M Volt DC & M Volt DC
SAVE THESE INSTRUCTIONS 5252 East 36th Street North W ichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 Use this manual with: Heavy Duty Fuel Pumps M-3025 12-Volt DC & M-3425 24-Volt DC MODELS:
More informationM-150S, M-180S. and M-240S Fuel Pump. Owner s Manual SAVE THESE INSTRUCTIONS TABLE OF CONTENTS DO NOT RETURN THIS PRODUCT TO THE STORE!
SAVE THESE INSTRUCTIONS M-150S, M-180S and M-240S Fuel Pump Owner s Manual DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact GPI before returning any product. If you are missing parts or experience
More informationMR 5-30 or MR 5-30N Series Fuel Meter Owner s Manual
SAVE THESE INSTRUCTIONS 5252 East 36th Street North Wichita, KS USA 67220-3205 316-686-7361 FAX: 316-686-6746 800-835-0113 www.gpipumps.net A Great Plains Ventures Subsidiary MR 5-30 or MR 5-30N Series
More informationQSI (Q-Star) Electronics Owner s Manual
QSI (Q-Star) Electronics Owner s Manual QSI Module (Installs in Plain Cover Plate) QSI2 Shown QSI Module (Installs in Display Mount Cover Plate) QSI2 Shown TABLE OF CONTENTS INTRODUCTION... 2 IMPORTANT
More informationPVDF TURBINE HOUSING
SAVE THESE INSTRUCTIONS Industrial Grade PVDF TURBINE HOUSING Owner s Manual Turbine shown here with Computer Electronics which are sold separately. 02/16 921915-02 Rev. E To the owner... Congratulations
More informationM-3020 STOP. Owner s Manual SAVE THESE INSTRUCTIONS TABLE OF CONTENTS DO NOT RETURN THIS PRODUCT TO THE STORE!
SAVE THESE INSTRUCTIONS M-3020 Owner s Manual STOP DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact GPI before returning any product. If you are missing parts or experience problems with your installation,
More informationQSB (Q-Star) Electronics for QSE Electromagnetic Meter. Owner s Manual TABLE OF CONTENTS
Owner s Manual QSB (Q-Star) Electronics for QSE Electromagnetic Meter Plain Cover Plate and Pulse-Out Transmitter (QSB) Display Mount Cover Plate (to mount a Q09 Display) and Pulse-Out Transmitter (QSB)
More informationM-3020 FUEL PUMP OWNER S MANUAL TABLE OF CONTENTS DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact. Great Plains Industries, Inc.
M-3020 FUEL PUMP OWNER S MANUAL DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact Great Plains Industries, Inc. before returning any product. If you are missing parts, or experience problems with
More informationM-150S, M-180S & M-240S FUEL PUMP
M-150S, M-180S & M-240S FUEL PUMP OWNER S MANUAL DO NOT RETURN THIS PRODUCT TO THE STORE! Please contact Great Plains Industries, Inc. before returning any product. If you are missing parts, or experience
More informationTURBINE HOUSING. Owner s Manual Includes Aluminum, Brass and Stainless Steel Housings and ANSI Flange Fittings
Manual Number 920708-3 Rev. C Industrial Grade TURBINE HOUSING Owner s Manual Includes Aluminum, Brass and Stainless Steel Housings and ANSI Flange Fittings 5252 East 36th Street North Wichita, KS USA
More informationPositive Displacement Flowmeters GM007 series instruction manual
MS499G 0603 0003 Positive Displacement Flowmeters GM007 series instruction manual GM007 Pulse Meter From serial No. CXXXX To the owner Thank you for purchasing a GPI GM GPI by telephone or fax.] Series
More informationLM-300 Lube Meter. Owner s Manual East 36th Street North Wichita, KS USA TEL: FAX: /10. Rev.
LM-300 Lube Meter Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 06/10 Rev. C 92203401 To the owner Congratulations on receiving your GPI Lube
More informationTURBINE HOUSING. Industrial Grade. Owner s Manual. Includes Stainless Steel Housings with Tri-Clover Flange Fittings SAVE THESE INSTRUCTIONS
SAVE THESE INSTRUCTIONS Industrial Grade TURBINE HOUSING Owner s Manual Includes Stainless Steel Housings with Tri-Clover Flange Fittings 02/16 920769-01 Rev. F To the owner Congratulations on receiving
More informationFM-300H and FM-300HR Electronic Disc Meter Owner s Manual
FM-300H and FM-300HR Electronic Disc Meter Owner s Manual 04/14 920679-06E To the owner Congratulations on receiving your GPI Electronic Disc Meter. We are pleased to provide you with a meter designed
More informationTurbine Housing. Owner s Manual Includes Aluminum, Brass and Stainless Steel Housings and ANSI Flange Fittings
Industrial Grade Turbine Housing Owner s Manual Includes Aluminum, Brass and Stainless Steel Housings and ANSI Flange Fittings 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX:
More informationLM-300 Lube Meter. Owner s Manual East 36th Street North Wichita, KS USA TEL: FAX: /08. Rev.
LM-300 Lube Meter Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 A Great Plains Ventures Subsidiary www.gpi.net 1-800-835-0113 08/08 Rev. A 92203401
More informationPositive Displacement Flowmeters GM020 series instruction manual
MS244G 0603 0003 Positive Displacement Flowmeters GM020 series instruction manual GM020 Pulse Meter From serial No. CXXXX To the owner Thank you for purchasing a GPI GM Series Flow Meter. Please take a
More informationM-1115S Series Fuel Pump
SAVE THESE INSTRUCTIONS M-1115S Series Fuel Pump Owner s Manual TABLE OF CONTENTS General Information...2 Safety Instructions...2 Installation...3 Operation...4 Maintenance...5 Repair...5 Troubleshooting...9
More informationOWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL
OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL 301A Diesel Polypropylene Fuel Storage Rotary & Dispensing Drum Pump Kits 60049GA 301A 60056G Description The 600 litre series diesel fuel storage & dispensing
More informationPositive Displacement Flowmeters GM515 series instruction manual
MS103G 0603 0004 Positive Displacement Flowmeters GM515 series instruction manual GM515 Mechanical meter From serial No. CXXXX To the owner Please take a few minutes to read thorugh this manual before
More informationQM Series Positive Displacement Fuel Meter
SAVE THESE INSTRUCTIONS QM Series Positive Displacement Fuel Meter Owner s Manual TABLE OF CONTENTS General Information...2 Installation...3 Operation...4 Calibration...5 Maintenance...5 Troubleshooting...6
More informationM-150S Series 12-Volt Fuel Pump M-150S-B100-MU Manual Nozzle & M-150S-B100-AU Automatic Nozzle Owner s Manual
SAVE THESE INSTRUCTIONS M-150S Series 12-Volt Fuel Pump M-150S-B100-MU Manual Nozzle & M-150S-B100-AU Automatic Nozzle Owner s Manual TABLE OF CONTENTS General Information...2 Safety Instructions...2 Installation...2
More informationM-3025CB-AV Fuel Pump
SAVE THESE INSTRUCTIONS M-3025CB-AV Fuel Pump Owner s Manual TABLE OF CONTENTS General Information... 2 Safety Instructions... 2 Installation... 3 Operation... 4 Maintenance... 4 Repair... 5 Troubleshooting...
More informationCM-3120 (115-volt, NPT, Gallon or Litre) CM-3220 (230-volt, NPT, Gallon) CM-3260 (230-volt, BSPT, Litre) Heavy Duty Cabinet Model Fuel Transfer System
SAVE THESE INSTRUCTIONS CM-3120 (115-volt, NPT, Gallon or Litre) CM-3220 (230-volt, NPT, Gallon) CM-3260 (230-volt, BSPT, Litre) Heavy Duty Cabinet Model Fuel Transfer System Owner s Manual 5252 East 36th
More informationOWNER'S MANUAL SAVE THESE INSTRUCTIONS
PRO25-012 12-Volt DC OWNER'S MANUAL SAVE THESE INSTRUCTIONS PRO25-024 24-Volt DC PRO25-012AD Automatic Diesel Nozzle PRO25-024AD Automatic Diesel Nozzle PRO25-012MD Manual Diesel Nozzle PRO25-024PO Pump
More informationOperating Instructions & Parts Manual. Oil Control Gun. Models 48UJ82, 48UJ83, 48UJ84, 48UJ85 and 48UJ86
Operating Instructions & Parts Manual EN Oil Control Gun Models 48UJ82, 48UJ83, 48UJ84, 48UJ85 and 48UJ86 PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL,
More informationIM SERIES BI-DIRECTIONAL INSERTION FLOWMETER. Instruction Manual. To the owner SAVE THESE INSTRUCTIONS TABLE OF CONTENTS
SAVE THESE INSTRUCTIONS 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 "A Great Plains Ventures Subsidiary" www.gpimeters.net 1-888-996-3837 IM SERIES BI-DIRECTIONAL
More informationFM-530-RD Remote Dispenser
SAVE THESE INSTRUCTIONS 5252 East 36th Street North W ichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 FM-530-RD Remote Dispenser Owner s Manual Please contact GPI before returning any product.
More informationPRO PRO20-115RD 115-Volt AC. PRO Volt AC OWNER'S MANUAL SAVE THESE INSTRUCTIONS
OWNER'S MANUAL SAVE THESE INSTRUCTIONS PRO20-115 PRO20-115RD 115-Volt AC PRO20-115AD Automatic Diesel Nozzle PRO20-115MD Manual Diesel Nozzle PRO20-115PO Pump Only PRO20-115RD For Remote Dispensing Systems
More informationMR 5-30-RD Remote Dispenser
SAVE THESE INSTRUCTIONS MR 5-30-RD Remote Dispenser Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 Please contact GPI before returning any product.
More informationTABLE OF CONTENTS GENERAL INFORMATION
To the owner Congratulations on receiving your GPI Industrial Grade Turbine. We are pleased to provide you with a product designed to give you maximum reliability and efficiency. Our business is the design,
More informationOperating Instructions & Parts Manual. Supa-Lite Lever Grease Gun. Model 48UJ77
Operating Instructions & Parts Manual EN Supa-Lite Lever Grease Gun Model 48UJ77 PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE
More informationFR1118- P10. User s Manual
FR1118- P10 User s Manual WARNING Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
More informationOperating Instructions & Parts Manual. Truck Drain. Model 48UJ80 and 48UJ81
Operating Instructions & Parts Manual EN Truck Drain Model 48UJ80 and 48UJ81 PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT
More informationPositive displacement flowmeters GM001 series instruction manual
MS15G 0603 0002 Positive displacement flowmeters GM001 series instruction manual To the owner Please take a few minutes to read through this manual before installing and operating your meter. Always retain
More informationOWNER S MANUAL. Model: PLATINUM55 ( ) (55 Gallon Deluxe Lawn & Garden Spot Sprayer)
Model: PLATINUM55 (5302852) (55 Gallon Deluxe Lawn & Garden Spot Sprayer) OWNER S MANUAL 55 Gal. Corrosion-Resistant Polyethylene Tank 12 Volt Diaphragm Pump, 2.2 GPM, 100 PSI Aluminum GunJet Pistol Grip
More informationLM-200 MECHANICAL LUBE METER Owner s Manual
LM-200 MECHANICAL LUBE METER Owner s Manual To the owner Congratulations on receiving your GPI Mechanical Lube Meter. We at GPI are pleased to provide you with a Lube Meter designed to give you maximum
More informationPositive Displacement Flowmeters GM50 series instruction manual
Positive Displacement Flowmeters GM50 series instruction manual GM50 Pulse GM50 Standard LCD G540 Deluxe LCD From serial No. CXXXX MS244G 0899 0001 To the owner means the GM Series flow meter is suitable
More informationAir Operated Double Diaphragm Pump. M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL
Air Operated Double Diaphragm Pump M-Pump ½ Metallic Non Metallic Pump INSTALLATION, OPERATION & MAINTENANCE MANUAL 0.5 I.O.M rev 05. 12/2015 INDEX Title Section Introduction.1 Safety.2 Warranty, General
More informationSTOP CITY PRESSURE BOOSTER PUMP INSTRUCTION MANUAL
CITY PRESSURE BOOSTER PUMP INSTRUCTION MANUAL MODEL #VP05, VP10 C US NSF/ANSI 372 255405 For loose, missing or damaged parts, or if the unit does not seem to be operating properly, please call before returning
More informationLubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser
INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber
More informationOWNER S MANUAL. Model: LG-30-TRL ( ) (30 Gallon Lawn & Garden Trailer Sprayer)
OWNER S MANUAL Model: LG-30-TRL (5302317) (30 Gallon Lawn & Garden Trailer Sprayer) Technical Specifications 30 Gal. Corrosion-Resistant Polyethylene Tank 12 Volt Diaphragm Pump, 2.1 g.p.m. 60 psi 15 Ft.
More informationTYPE F-YRD. Operator s Manual
TYPE F-YRD Operator s Manual Belshaw Bros., Inc. 814 44 th Street NW, Suite 103 Auburn, WA 98001 USA Phone: (206) 322-5474 Fax: (206) 322-5425 E-mail: service@belshaw.com http://www.belshaw.com EQUIPMENT
More informationAgxcel GX12i Chemical Injection System
Agxcel GX12i Chemical Injection System Table of Contents System Contents... 3 Specifications... 4 Safety Precautions and Tips... 5 Operations... 6 Installation... 7 Maintenance... 8-9 Troubleshooting...
More informationSERIES FR400 DIAPHRAGM PUMP
Owner's Manual SERIES FR400 DIAPHRAGM PUMP For Industrial Fluid Transfer For models: FR405, FR410, FR412, FR205, FR210, FR212 (DC) & FR450, FR450E, FR452 (AC) Model FR410 Patent #5,219,274 DANGER EXPLOSION
More informationOWNER S MANUAL STOP. Models: Blade Master 1.5 HP 1500 Series Stationary Transfer Pump 1.5 Pump, Single Phase AC 110/220V, Non-Explosion proof
SAVE THESE INSTRUCTIONS Models: 02-1514-GII, 02-1520-GII, 02-1521-GII, 02-1522-GII Blade Master 1.5 HP 1500 Series Stationary Transfer Pump 1.5 Pump, Single Phase AC 110/220V, Non-Explosion proof OWNER
More informationPENBERTHY MODELS GL AND GH GAS OPERATED JET PUMPS INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
Before installation, these instructions must be read carefully and understood. PRODUCT WARRANTY Emerson warrants its Penberthy products as designed and manufactured to be free of defects in the material
More informationOWNER S MANUAL. Model: FSUTL60-12V ( ) Technical Specifications. Assembly Instructions
OWNER S MANUAL Model: FSUTL60-12V (5301421) (60 Gallon Lawn & Garden Utility Sprayer - Boom-Ready) Technical Specifications 60 Gal. Corrosion-Resistant Polyethylene Tank Deluxe Pistol-Grip Handgun 25 Ft.
More informationOWNER S MANUAL. Model: FSUTL40-12V ( ) Technical Specifications. Assembly Instructions
OWNER S MANUAL Model: FSUTL40-12V (5301420) (60 Gallon Lawn & Garden Utility Sprayer - Boom-Ready) Technical Specifications 40 Gal. Corrosion-Resistant Polyethylene Tank Deluxe Pistol-Grip Handgun 25 Ft.
More informationCompressor Clutch Replacement Procedure
Clutch Replacement Procedure P-1401-WE 819-0316 Installation Instructions An Altra Industrial Motion Company Warner Replacement Clutches for the following compressors: Denso 6E171 10P15 6P148 6C17 Ford
More informationMetroPrime 22MPC Self-Priming Centrifugal Pump
Page 1 of 6 prevent priming or reduce pump capacity. OPERATION The 22 MPC-Metropolitan Pump is a self-priming centrifugal pump and only requires priming prior to its initial start. The pump will retain
More informationWater Jetter Units DU JT50 / DU JT100
Water Jetter Units DU JT50 / DU JT100 Serial Number: Owner s Manual #0818 102011 Installation Date: IMPORTANT Please read and u n d e r s t a n d t h i s manual. Store in safe location for future reference.
More informationOperating Manual High Viscosity Dispense Valve Item #
Operating Manual High Viscosity Dispense Valve Item # 984594 CLOSE OPEN Item # 984594 Label # 8901197 Warnings INJECTION HAZARD Spray from the valve, hose leaks, or ruptured components can inject fluid
More informationMECHANICAL FUEL METER. FM-100 and FM-200 Series Owner s Manual
MECHANICAL FUEL METER FM-100 and FM-200 Series Owner s Manual To the owner Congratulations on receiving your GPI Mechanical Fuel Meter. We at GPI are pleased to provide you with a fuel meter designed to
More informationOWNER S MANUAL. Model: GOLD25 ( ) (25 Gallon Lawn & Garden Spot Sprayer)
OWNER S MANUAL Model: GOLD25 (5302849) (25 Gallon Lawn & Garden Spot Sprayer) 25 Gal. Corrosion-Resistant Polyethylene Tank 12 Volt Diaphragm Pump, 2.2 GPM, 100 PSI Deluxe Pistol Grip Handgun 15 Ft. Handgun
More informationPremium Series Grease Dispensing Handle One and Two Piece Body Styles
Service Bulletin SB3018 Rev. A 3/07 Premium Series Grease Dispensing Handle One and Two Piece Body Styles Models: Handle w/swivel and 36" Whip Hose 020 Handle w/swivel and 18" Whip Hose 025 Handle w/swivel
More informationColt Series C400, C500
Colt Series C400, C500 RP/IS-A-C400/C500 C400 OSY Reduced Pressure Zone Assemblies Reduced Pressure Detector Assemblies Sizes: 2 1 2" 10" (65 250mm) Installation Service Repair Kits Maintenance For other
More informationElectric Diesel Pump EDP/12, EDP/24
INSTRUCTION MANUAL Electric Diesel Pump EDP/1, EDP/4 S1940, Rev C Congratulations on purchase of this World Class Electric Diesel Pump! Portable Diesel transfer pumps designed for everyday use in Agricultural,
More informationHALLMARK INDUSTRIES INC
Performance Part No. HP. CONVERTIBLE JET PUMP USER S MANUAL GPH of Water @ Total Discharge Pressure of 40 psi Max. Pressure Max suction (shallow well) Max Suction (deep well) Max GPM (@0 head) Max Discharge
More information305 REMOTE DISPENSER
Owner's Operation & Safety Manual 305 REMOTE DISPENSER Model 305RU OUTSTANDING FEATURES From 6 to 40 GPM / 23 to151 LPM Meter accuracy of ± 2% GENERAL DESCRIPTION Dear Fill-Rite Customer, Thank you for
More informationMODEL HD-BTC. Installation, Operation & Repair Parts Information REV041416
MODEL HD-BTC Installation, Operation & Repair Parts Information REV041416 TABLE OF CONTENTS SAFETY INSTRUCTIONS 1 DEFINITIONS 1 SPECIFICATIONS 2 INSTALLATION INSTRUCTIONS 2 OPERATING INSTRUCTIONS 2 MAINTENANCE
More information7.3L POWERSTROKE BANJO BOLT KIT Fits L Powerstroke Diesel. Installation Guide
7.3L POWERSTROKE BANJO BOLT KIT Fits 94-03 7.3L Powerstroke Diesel Installation Guide INSPECT CONTENTS OF THIS KIT THOROUGHLY BEFORE STARTING THE INSTALLATION PROCESS! IF YOU FIND A PROBLEM WITH YOUR PACKAGE:
More informationDP DIAPHRAGM PUMP Parts & Instruction Manual
DP-392.1 DIAPHRAGM PUMP Parts & Instruction Manual Price $10.00 CDS-JOHN BLUE COMPANY DIVISION OF ADVANCED SYSTEMS TECHNOLOGY, INC. 290 Pinehurst Drive Huntsville, Alabama 35806 P. O. Box 1607 Huntsville,
More informationIMPORTANT!!!! Read this manual before attempting any installation, wiring or operation.
Industrial Turbo Meters Sizes 2" through 6" Installation & Operation Manual IMPORTANT!!!! Read this manual before attempting any installation, wiring or operation. BadgerMeter,Inc. IOM-003-15 Part No.
More informationREAD THIS MANUAL CAREFULLY BEFORE USING THE PUMP
OWNER S MANUAL Pond Pump READ THIS MANUAL CAREFULLY BEFORE USING THE PUMP Important Notice: This manual contains important information about the installation, operation and safe use of this product. This
More informationINSTRUCTION MANUAL ELECTRIC DIESEL PUMP KIT
AFP12-im -issue2-2017 INSTRUCTION MANUAL ELECTRIC DIESEL PUMP KIT INSTRUCTION MANUAL ELECTRIC DIESEL PUMP KIT INTRODUCTION Thank you for purchasing a Macnaught 12 or 24 volt Electric Diesel Fuel Pump.
More informationSeries: PFUEG 1/12HP, 5000 RPM, 60 Hz Utility Pumps
INSTALLATION MANUAL Series: 1/12HP, 5000 RPM, 60 Hz ISP No: - 6/09 General Safety Information Before installation, read the following instructions carefully. Failure to follow instruction and Safety information
More informationTroubleshooting 3Z8 038 Rev B
Troubleshooting 3Z8 038 Rev B INSTRUCTIONS WARNING INJECTION HAZARD This form is only a quick reference for troubleshooting Graco sprayers. To reduce the risk of serious injury, including fluid injection,
More informationSUNC3000 / Item #40885
SUNC3000 / Item #40885 AUTOMATIC POOL COVER PUMP OPERATIONS MANUAL WWW.SUNRUNNERPOOL.COM 1 . Performance GPH of Water @ Total Feet Of Lift MODEL HP Max. Lift 0 ft. 5 ft. 10 ft. 15 ft. 20 ft. SUNC3000 1/3
More informationElectric Fuel Pump FPM
INSTRUCTION MANUAL Electric Fuel Pump FPM S1590, Rev B LISTED MOTOR FPM-12, FPM-24, FPM-115, FPM-220 Congratulations on purchase of this World Class Electric Fuel Pump! Elbow This is an Electric Fuel Pump.
More informationAqua Ultraviolet Sunami Series Pumps 1/3HP, 3/4HP, 3HP, 4HP, 5HP
TM 42371 Avenida Alvarado Temecula, CA 92590 TOLL FREE (800) 454-2725 TEL (951) 296-3480 FAX (951) 296-3490 www.aquauv.com Aqua Ultraviolet Sunami Series Pumps 1/3HP, 3/4HP, 3HP, 4HP, 5HP Sunami Warranty
More informationSeries 957, 957N, 957Z, 957RPDA, 957NRPDA, 957ZRPDA
Series 957, 957N, 957Z, 957RPDA, 957NRPDA, 957ZRPDA Reduced Pressure Zone Assemblies Reduced Pressure Detector Assemblies Sizes: 2 1 2" 10" (65 250mm) Installation Service Repair Kits Maintenance RP/IS-957/957RPDA
More informationLifeGuardLift. LifeGuard Power Lift Model #100287A OWNERS MANUAL. Rev: 2/14/11
LifeGuardLift OWNERS MANUAL LifeGuard Power Lift Model #100287A Rev: 2/14/11 Table of Contents 1. ASSEMBLY INSTRUCTIONS A. Lift Assembly B. Setup C. Disassembly 2. CONTROL SYSTEM A. Batteries B. Battery
More informationMODEL 1385 & 1385-H Professional Rotary Drum Pump
NOV - 2010 Form 404168 Section - B5 Page - 47 OWNER/OPERATOR RESPONSIBILITY All instructions and warnings contained in this manual shall be read and understood by the owner/operator prior to operating
More informationModel For petroleum products and other fluids compatible with aluminum and buna-n seals.
Instructions - Parts List Piston Hand Pump 311308C Model 260407 For petroleum products and other fluids compatible with aluminum and buna-n seals. Model 260406 For herbicides and other chemicals or fluids
More informationMODEL NO GALLON H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
5300431 MODEL NO. 9-150 150 GALLON - 5.5 H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS Pressure Gauge - Adjustable Pressure Range Suction Line Filter Handgun With 25 Feet Of Handgun Hose
More informationOWNER S MANUAL. Model: FSTS-25-BLK ( BLK) Model: FSTS-25-BLU ( BLU) (25 Gallon Lawn & Garden Trailer Sprayer)
OWNER S MANUAL Model: FSTS-25-BLK (5302841-BLK) Model: FSTS-25-BLU (5302841-BLU) (25 Gallon Lawn & Garden Trailer Sprayer) Technical Specifications 25 Gal. Corrosion-Resistant Polyethylene Tank Squeeze
More information200 & 300 Gallon 3 Point w/5880 Nozzle ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
5300826 Model: 200-3PT-5880 5300827 Model: 300-3PT-5880 200 & 300 Gallon 3 Point w/5880 Nozzle ASSEMBLY / OPERATION INSTRUCTIONS / PARTS PUMP SYSTEM ASSEMBLY INSTRUCTIONS 1. Use a good grade of thread
More informationMODEL NO. SK-61-12V 12 VOLT SKID MOUNTED LAWN & GARDEN SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
5301304 MODEL NO. SK-61-12V 12 VOLT SKID MOUNTED LAWN & GARDEN SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS ASSEMBLY The sprayer is fully assembled at the factory. The only assembly necessary is to
More informationHR-20P Pneumatically Controlled Pressure Regulator
HR-20P Pneumatically Controlled Pressure Regulator Instruction and Service Manual Hydroplex Corporation 230 West Gloria Switch Rd. Lafayette, LA 70507 337-233-0626 www.hydroplexpumps.com I. General Instructions
More informationPresoak & Tire/Engine Cleaner Systems (Air Pump) DU TC_A & DU PS_A
Presoak & Tire/Engine Cleaner Systems (Air Pump) DU TC_A & DU PS_A Owner s Manual #0795 Customer Number: Model Number: Serial Number: Installation Date: IMPORTANT Please read and u n d e r s t a n d t
More informationModel Series. PumpAgents.com - buy pumps and parts online ELECTRIC BILGE PUMPS. Model Series FEATURES SPECIFICATIONS STANDARD MODELS
PumpAgents.com - Click here for Pricing/Ordering Model 36600-Series ELECTRIC BILGE PUMPS FEATURES Self-Priming Diaphragm Design Allows Dry Running Quiet Operation Built-in Hydraulic Pulsation Dampener
More informationINSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST
CMP SERIES CPM15-15B (25905F300) CPM15-15B-H/D (25905F301) CPM18-15B (25905F303) CPM18-15B-H/D (25905F304) INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL WITH PARTS LIST NOTE! To the installer: Please
More information