Transcription

1 1

2 Proudly providing high-quality products to clients throughout North America East Jordan Plastics is a family owned business. We thank our dedicated employees and our loyal customers for all their years of support. Our goal is to earn your business each and every season. We strive to meet your individual needs when it comes to production timing, product quality and delivery efficiency. To that end, we develop an interactive relationship with all our customers that fosters an open dialog. We still believe in good old-fashioned hard work, and we continue to thrive by producing high quality products and by offering the best personal service in the industry. East Jordan 6400 M-32 Hwy, East Jordan, MI Beaverton 4378 South M-18, Beaverton, MI South Haven 1600 Stieve Drive, South Haven, MI Distribution Warehouse 100 Veterans Blvd, South Haven, MI Table of Contents About East Jordan Plastics... 2 Project 100%... 6 Printing... 8 Shuttle Brand Hanging Baskets, Planters & Injection Molded Pots... 9 SHUTTLE POT Brand Flower Pots...12 Plant Rings & Pot Cages...15 SHUTTLE TRAY Brand Flower Trays...16 SHUTTLE Brand Squares and Pot Carriers...20 Plug and Propagation Trays...23 Landscape Market Trays...27 Liner Sheets...28 Sheet of Pots...29 Injection Molded Trays...30 A Series Flats and Inserts...31 T Series Flats and Inserts...35 S Series Flats and Inserts...39 L Series Flats and Inserts...43 C, CT, E, G, K, P, Y Series Flats and Inserts...45 Compatibility Charts...51 Color Guide Call your Regional Sales Manager or East Jordan Customer Service at

3 Bryan Diller, Scott Diller, Katie Doran, Cal Diller, Matt Diller and Nathan Diller To Our Valued East Jordan Plastics Customers, Three generations ago, our founders Ken and Shirley Diller settled in East Jordan, Michigan because of the natural abundance of cedar trees needed to produce wooden greenhouse flats. The company operated under the name of East Jordan Box and Crate Co. until the mid-1960 s. As the company transitioned to manufacturing trays and inserts from wood to plastic material, the name was changed to East Jordan Plastics, Inc. Our name has been recognized in the industry as a quality container manufacturer for more than 70 years. Throughout the years, we have never forgotten our roots and efforts in being 100% dedicated to the horticulture industry. We have grown into a multi-facility manufacturing company, while focusing on continued investment in our employees, technology and closed loop recycling. We are excited by the opportunity to serve our customers and the industry as a whole, and it is our ultimate goal to continue as long as plants need containers. We wouldn t be where we are without the dedication of our employees, and ultimately your loyalty to East Jordan Plastics, Inc. Thank you for Growing with us for 70 years! The Diller Family 3

4 Why is East Jordan Plastics the best company for you?

5 5 Our Packaging Today most of our product is shipped bulk on pallets. However, product is also packaged in corrugated cartons, corrugated sleeves, and plastic bags. We usually can accommodate special packaging requests. 7 How We Help Grow Your Sales We offer up to 8-color offset printing and adhesive labeling, as well as graphic design services to help you create branding and merchandising programs that can grow business. 6 Our Commitment To Product Development We are constantly refining our products and processes to benefit growers. In addition, we actively seek grower input to jointly design and bring new products to market. Our Recycling Program Our commitment to recycling impacts your waste removal costs, significantly reduces the amount of plastic going to landfills, and shows your customers that together we are concerned about the 8environment. 9 Our Delivery Record Our own fleet of East Jordan Plastics trucks and several reliable carriers allow us to control delivery schedules and make sure your order arrives on time. Our veteran drivers know many of our customers personally. 3 5

6 The East Jordan Plastics Recycling Program Responsibly Green CLOSED LOOP RECYCLING Reuse Containers are manufactured from recycled plastic. Reduce Reduce the volume of plastic in landfills while saving on waste removal fees. Recover Used containers are recovered from greenhouses or post-consumer level. Recycle Containers are recaptured for reuse by growers or processed into regrind for manufacturing new containers, closing the loop. We want your used plastic growing containers. 6 Call your Regional Sales Manager or East Jordan Customer Service at

7 It s Easy to Recycle with East Jordan Plastics We recycle PS, PP and HDPE Containers do not have to be cleaned. Knock your containers free of residual soil to allow for nesting. Please separate material by type PS PP HDPE Polystyrene: labeled with #6 Polypropylene: labeled with #5 High Density Polyethylene: labeled with #2 Palletize material Nest like-containers together and strap or wrap Nest products 90"-100" tall for single pallets or up to 48" for double stacking pallets. Pick-up Truckload quantities are ideal. LTL quantities can be arranged. We can easily coordinate pick-ups with deliveries of finished product. EJP will also accept deliveries of used horticulture containers to our South Haven facility. Our Commitment to Recycling East Jordan Plastics (EJP) has been a recycler of plastic since the early 60 s when we first began thermoforming plastic flats and inserts. Even then we realized the importance of recycling. Today EJP has engineered and implemented a closed loop recycling process that uses proven technology and that ensures maximum energy efficiency and quality products. The first processing line of our 130,000 square foot facility in South Haven, Michigan has the capacity to recycle over 15 million pounds of material annually. Other lines will be added as needed. At EJP we strongly believe that the best way to achieve sustainability is to recycle and reuse what we manufacture. With this in mind, it is our position that the most sustainable growing container is one made from recycled plastic. Advantages of Recycling Plastic Horticultural Containers Recycled plastic containers can recover upwards of 60% of the energy put into processing the product initially. The recycling closed loop for plastic containers is repeated each time the material is recycled with significant energy recovery gains. Horticultural containers avoid landfills and are returned directly to our manufacturing stream. Benefits to Growers and Retailers Reduce waste removal fees by keeping containers out of dumpsters and landfills Enhance your public image as a wise steward of the environment by using sustainable plastic growing containers Assist EJP with securing valuable recycled raw material and helping control input costs Create opportunities for selective containers to be reused Increase foot traffic as consumers return their containers to your garden center Attract new customers from non-participating retailers Achieve a better sustainable footprint due to trash reduction 7

8 Set your plants apart with labeling and high impact graphics Our 8-color printing capability will help retailers sell out faster and re-order sooner! Move Product Faster and Build Brand Loyalty Printing helps move product. It builds brand recognition and makes your product stand out among others in the garden center. East Jordan Plastics can a o r ari ti s distincti. Cost-effective Process With Spectacular Results Our new digital print plate technology, combined with our 8-color print capability, offers you an economical alternative to other forms of high resolution printing and labeling. 8 Call your Regional Sales Manager or East Jordan Customer Service at

9 SHUTTLE Brand Hanging Baskets, Planters & Injection Molded Pots The full featured quality injection molded SHUTTLE Brand Basket and SHUTTLE Brand Planter lines are all Made in the USA. Our 10, 11 and 12 Baskets have multiple hanging options; over the rim for automation (10 and 11 only), and double clip and wire hanger holes. 3-Strand Hangers available for the 10 and 11 baskets; 4-Strand Hangers available for the 12 basket. Tag slots integrated in rim. Our 10, 12 and 14 Planters have sturdy construction with heavy rims and sidewalls with bottom slots for use with industry standard saucers. Our new 8 (SPI800) and 10 (SPI1000) Injection Molded pots have strong rims that accept both hangers and our new cages. In combination with the cages, these containers work well for Poinsettia, Mum and Nursery crops that need plant support. Colors Available terracotta black green white mocha speckled mocha chocolate SHUTTLE Brand Hanging Baskets & Accessories SHB 1000 STD SHB 1000 PRM SHB 1100 STD SHB 1290 PRM BH 1575 BH 1875 BH 2250 BH 21 WIRE BH 24 WIRE HBD

10 SHUTTLE Brand Hanging Baskets, Planters & Injection Molded Pots SHUTTLE Brand Planters SPP 1000 SPP 1200 SPP 1400 SHUTTLE Brand Injecton Molded Pots SPI 800 SPI Call your Regional Sales Manager or East Jordan Customer Service at

11 Liquid Volume Packaging Item Description Diameter Height Cubic Inches U.S. Metric Carton Pallet SHB 1000 STD 10 Standard Hanging Basket 9 (ID); 10 (OD) 5 7/ cu in 1.32 gal 5.0 liters 100 1,900 or 32 CS SHB 1000 PRM 10 Premium Hanging Basket 9 (ID); 10 (OD) 6 5/ cu in 1.51 gal 5.7 liters 100 1,548 or 26 CS SHB 1100 STD* 11 Standard Hanging Basket 10 (ID); 10 3/4 (OD) 6 3/ cu in 1.57 gal 5.9 liters 100 1,312 or 24 CS SHB 1290 PRM 12 Premium Hanging Basket 12 (ID); 12 7/8 (OD) cu in 2.50 gal 9.5 liters 100 1,032 or 12 CS SPI Injection Molded ShuttlePot 7 5/16 (ID); 8 (OD) 6 1/ cu in 1.00 gal 5.7 liters 100 3,400 SPI Injection Molded ShuttlePot 9 3/16 (ID); 10 (OD) 7 3/ cu in 1.50 gal 8.5 liters 100 1,980 or 32 CS SPP Planter 10 (ID); 11 (OD) 7 3/ cu in 1.89 gal 7.2 liters 100 1,056 or 20 CS SPP Planter 10 3/4 (ID); 12 (OD) 9 1/ cu in 2.65 gal 10.0 liters or 18 CS SPP Planter 14 (ID); 15 (OD) 11 3/ cu in 5.50 gal 20.8 liters or 27 CS HBD Drainage Disk 7.5 N/A N/A N/A N/A 1, CS BH Strand Plastic Hanger N/A N/A N/A N/A N/A CS BH Strand Plastic Hanger N/A N/A N/A N/A N/A CS BH Strand Plastic Hanger N/A N/A N/A N/A N/A CS BH 21 WIRE 21 3-Strand Wire Hanger N/A N/A N/A N/A N/A CS BH 24 WIRE 24 4-Strand Wire Hanger N/A N/A N/A N/A N/A CS * Matte finish available 11

12 SHUTTLE POT Brand Flower Pots With sturdy rims and shoulders for quick de-nesting and dispensing, not to mention extra strength and stability, we ve designed our SHUTTLE POT brand flower pots to move more plants, more quickly. Our co-extruded pots feature a dark inner layer that prevents light from harming delicate roots. Our Dual-level drain holes and footed bottom design facilitate better drainage and a smooth, seamless finish facilitates easy plant removal. While outside, a boldly colored exterior adapts easily to both printing (round pots only) and labeling for that extra edge that can create flyoff- the-shelf sales appeal. Colors Available terracotta black green white Custom colors available, contact us for a quote. SP 350 SP 400 SP 400 TS SP 400D TS SP 433 SP 433XP SP 433D SP433D TS SP 450 SP 470L SP 470 SP 470 TS 12 Call your Regional Sales Manager or East Jordan Customer Service at

13 SP 470D SP 500 QL SP 500 QD SP 525 SP 525D SP 550 SP 600 SP 600D SP 600 DS SP 630 ** SP 630 TS SP 650 SP 670 SP 750** SP 750 TS SP 750D SP 800MP SP 800A 13

14 SHUTTLE POT Brand Flower Pots SP 850D** SP 850D TS SP 900 SP 1000 SP / cu in 12.3 fl oz 365 ml 1,950 28,620 SP Pint Extended Print Side cu in 1.00 pt 473 ml 1,800 22,230 SP 400 TS* 4 Pint Extended Print Side w/ Tag Slots cu in 1.00 pt 473 ml 1,800 22,230 SP 400D TS* 4 Deep Extended Print Side w/ Tag Slots cu in 1.38 pt 655 ml 1,500 22,230 SP /3 7 Degree Taper cu in 1.25 pt 594 ml 1,100 17,340 SP 433 XP* 4 1/3 5 Degree Taper cu in 1.33 pt 629 ml 1,040 17,340 SP 433D 4 1/3 Deep cu in 1.71 pt 813 ml 1,040 16,830 SP 433D TS* 4 1/3 Deep w/ Tag Slots cu in 1.71 pt 813 ml ,464 SP / cu in 1.42 pt 675 ml 1,000 14,400 SP 470L* 4 7/10 Low cu in 1.72 pt 816 ml ,000 SP /10 Quart cu in 1.00 qt 946 ml ,000 SP 470 TS* 4 7/10 Quart w/ Tag Slots cu in 1.00 qt 946 ml ,000 SP 470D 4 7/10 QT Deep cu in 1.06 qt 1.0 L ,000 SP 500 QL 5 Quart Low cu in 1.0 qt 946 ml ,480 SP 500 QD 5 Quart Deep cu in 1.05 qt 1.0 liters ,480 SP / cu in 1.25 qt 1.18 liters 720 8,820 SP 525D 5 1/4 Deep cu in 1.68 qt 1.59 liters 480 7,245 SP /2 (Texas 6) cu in 1.25 qt 1.18 liters 720 8,400 SP cu in 1.50 qt 1.42 liters 680 8,320 SP 600D 6 Deep cu in 1.68 qt 1.59 liters 680 8,320 SP 600 DS* 6 Deep Standard cu in 1.86 qt 1.77 liters 680 7,140 SP /3 Trade Gallon cu in 2.5 qt 2.37 liters 270 5,500 SP 630 TS 6 1/3 Trade Gallon w/ Tag Slots cu in 2.5 qt 2.37 liters 270 5,500 SP / cu in 2.00 qt 1.89 liters 300 5,460 SP /10 Trade Gallon cu in 2.68 qt 2.54 liters 240 4,620 SP / cu in 3.00 qt 2.84 liters 240 3,750 SP 750 TS 7 1/2 w/ Tag Slots cu in 3.00 qt 2.84 liters 240 3,750 SP 750D 7 1/2 Deep cu in 4.0 qt 3.78 liters 210 3,450 SP 800MP 8 Mum cu in 3.18 qt 3.01 liters 240 3,360 SP 800A 8 Azalea cu in 3.54 qt 3.35 liters 210 3,360 SP 850D 8.5 Trade 2 Gallon cu in 1.51 gal 5.73 liters 180 2,880 SP 850D TS 8.5 Trade 2 Gallon w/ Tag Slots cu in 1.51 gal 5.73 liters 180 2,880 SP cu in 1.26 gal 4.77 liters 140 2,530 SP Azalea cu in 1.84 gal 6.96 liters 120 1,900 Key: A = Azalea; D = Deep; L = Low; MP = Mum Pan; QL = Quart Low; QD = Quart Deep NOTE: Bulk Pallet Quantities are Half Pallets * Special order item-minimum order requirements apply ** Tag Slot pots may be substituted for Non-Tag Slot pots at EJP discretion. 14 Call your Regional Sales Manager or East Jordan Customer Service at

15 Plant Ring PR-650/700 PR-750/800 PR-1000 PR-650/700 Plant Ring for 6 to 7 pots 7 3 3/4 1, CS PR-750/800 Plant Ring for 7 ½ to 8 ½ pots 8 4 1/4 1, CS PR-1000 Plant Ring for 10 Pots / CS Pot Cages SPI CAGE 6 SPI CAGE 8 SPI CAGE 10 SPI CAGE 6 6 Cage for SP600 / SP600D / SP600DS 6 4 TBD TBD SPI CAGE 8 8 Cage for SPI 8 Injection Molded Pot /16 TBD TBD SPI CAGE Cage for SPI 10 Injection Molded Pot /16 TBD TBD 15

16 SHUTTLE TRAY Brand Flower Trays Worry-free shipment combines with fast and easy sales setup not to mention the encouragement of multi-pot sales! Our sturdy SHUTTLE TRAY brand flower trays and pot carriers anchor pots securely during transport from bench to rack to truck. The unique design makes it impossible for soil to fall between the growing pots. Multi-compartment plant trays facilitate fast display breakdown and setup, as well as attractive spacing of large-canopied crops. In addition, multiple holes ensure adequate drainage. East Jordan Plastics is the only source for SHUTTLE TRAY brand flower trays. ST 3-12 ST 350-6P STL ST OS STG WMB STG ES TS ST STB P STB V P STK 400XP - 10 WMP STK CB STK ES STK 400D - 10 ST ST ST ST STT Call your Regional Sales Manager or East Jordan Customer Service at

17 ST ST ST ST 433D - 8 ST 433D - 10 STB ST ST ST OS V ST ST ST 470L - 8 ST 470L - 10 ST 470L - 12 WMP STT ST ST ST

18 SHUTTLE TRAY Brand Flower Trays STY OS ST 470D - 8 TS STY 470D - 8 OS TS STT 500QTL - 8 STT 500QTD - 8 ST ST 525D - 8 STT OS ST ST ST ST (R) ST 600D-6 ST ST ST ST Low ST High ST Call your Regional Sales Manager or East Jordan Customer Service at

19 ST 3-12* 3-12 Pack 9 1/4 12 1/ ,400 ST P* 3 1/2-6 Pack Punched / ,700 STL * 3 1/2-10 Pack Offset 7 1/ ,200 ST OS* 3 1/2-11 Pack Offset / ,800 STG WMB* 3 1/2-12 Pack ,900 STG ES TS* 3 1/2-12 Pack w/ Tag Slot ,550 ST /2-18 Pack 10 5/ ,800 STB P 4-6 Pack w/ Handle Holes Punched /8 N/A 7,425 STB V P 4-6 Pack Vented Punched /8 N/A 7,425 STK 400XP - 10 WMP 4-10 Pack Punched ,300 STK CB* 4-10 Pack Continuous Bottom ,000 STK ES 4-10 Pack Exposed Side ,300 STK 400D - 10* 4-10 Deep Pack Exposed Side ,850 ST Pack ,000 ST Pack 10 5/8 21 1/ ,800 ST Pack / ,450 ST 425-8* 4 1/4-8 Pack Spacer 10 5/ ,800 STT /3-8 Pack Spacer ,600 ST /3-8 Pack 8 1/ ,000 ST /3-10 Pack 8 5/8 21 5/ ,000 ST /3-15 Pack 12 3/8 21 3/4 50 2,100 ST 433D /3 Deep - 8 Pack 8 1/ ,750 ST 433D /3 Deep - 10 Pack 8 5/8 21 5/ ,000 STB 450-6* 4 1/2-6 Pack w/ Handle Holes / ,500 ST /2-8 Spacer Pack 10 1/ ,800 ST /2-10 Pack 8 11/ / ,000 ST OS V 4 1/2-10 Pack Offset Vented 10 7/8 21 1/ ,800 ST /2-12 Pack 13 5/ / ,625 ST /2-15 Pack 13 5/8 22 1/2 50 1,800 ST 470L /10 Quart Low - 8 Pack 9 5/ ,250 ST 470L /10 Quart Low - 10 Pack 9 1/2 23 1/ ,700 ST 470L - 12 WMP* 4 7/10 Quart Low - 12 Pack Punched /4 18 7/8 50 1,800 STT /10 8 Pack Spacer ,600 ST /10 Quart - 8 Pack 9 5/ ,250 ST /10 Quart - 10 Pack 9 1/2 23 1/ ,700 ST /10 Quart - 12 Pack 14 1/4 18 7/8 50 1,800 STY OS 4 7/10 Quart - 8 Pack Offset 8 1/ ,500 ST 470D - 8 TS 4 7/10 Deep Quart - 8 Pack w/ Tag Slot 4 9 5/ ,700 STY 470D - 8 OS TS 4 7/10 Deep Quart - 8 Pack Offset w/ Tag Slot 8 1/ ,500 STT 500QTL Quart Low - 8 Pack ,600 STT 500QTD QT Deep - 8 Pack ,700 ST /4-8 Pack 10 5/ ,240 ST 525D - 8* 5 1/4 Deep - 8 Pack 10 5/ ,000 STT OS 5 1/2-6 Pack Offset ,700 ST /2-6 Pack ,000 ST /2-8 Pack For Texas ,400 ST Pack ,900 ST (R) 6-6 Pack ,150 ST 600D Deep Pack N/A N/A N/A N/A ST /3-3 Pack 6 5/8 19 3/4 50 3,250 ST /3-6 Pack 12 5/ ,750 ST /2-6 Pack 13 1/8 19 3/4 50 1,800 ST Low* 6 7/10 Trade Gal 6 Pack - Low 13 1/8 19 3/4 50 1,800 ST High 6 7/10 Trade Gal 6 Pack - High 13 1/8 19 3/4 50 1,800 ST /2-3 Pack 7 1/2 22 1/ ,000 Key: CB = Continuous Bottom; D = Deep; ES = Extended Side; L = Low; OS = Offset; P = Punched; PP = Polypropylene; TS = Tag Slot; V = Vented; XP = Extended Print Side * Special order item-minimum order requirements apply 19

20 SHUTTLE Brand Squares and Pot Carriers SHUTTLE Brand Squares Like our SHUTTLE POT brand flower pots, our SHUTTLE brand squares are designed to withstand whatever the grower world dishes out. They have the same strong rims and sturdy shoulders for quick de-nesting and trouble-free use in automated systems, a smooth, seamless finish to make plant removal a snap, and can be labeled. Colors Available terracotta black green Custom colors available, contact us for a quote SS 265 SS 325 SS 400 Deep TS SS 450 SS 450 Deep SS 600 SS / cu in 7.58 fl oz ml 2,430 26,100 SS /4 Pint cu in 1.00 pt 473 ml 1,800 20,280 SS 400 Deep TS 4 Deep Square 4 5 1/ cu in 1.0 qt 946 ml ,800 SS / cu in 1.62 pt 770 ml 750 9,000 SS 450 Deep 4 1/2 Deep cu in 1.00 qt 946 ml 750 9,000 SS cu in 1.25 qt 1.18 l 720 7,920 *Only Black, Green, and Terracotta are available. NOTE: Bulk Pallet Quantities are Half Pallets Press Fit Squares A Square T Square A Square A 4 Press Fit Square Pot cu in 1.02 pt ml CS T Square T 4 Press Fit Square Pot cu in fl oz ml CS 20 Call your Regional Sales Manager or East Jordan Customer Service at

21 Pot Carriers for SHUTTLE Brand Squares PC SS PC SS 325PP - 12 PC SS 325PP - 18 PC SS 325PP - 20 PC SS 400D - 10 WMB PC SS PC SS PC SS PC SS SS Pack 10 7/8 21 1/ ,200 PC SS 325PP - 12 SS 325PP - 12 Pack 6 2/3 19 3/ ,550 PC SS 325PP - 18 SS 325PP - 18 Pack ,150 PC SS 325PP - 20 SS 325PP - 20 Pack / ,700 PC SS 400D - 10 WMB SS 400 Deep - 10 Pack ,400 PC SS SS Pack 8 1/ ,500 PC SS SS Pack 12 1/ ,100 PC SS SS Pack ,

22 SHUTTLE Brand Squares and Pot Carriers Specialty Pot Carriers AF 3 1/2 PC STD AF 4 1/2 PC HD V AF 4 1/2 PCT STD V AF 4 1/2 PWT HD PC PC AF 3 1/2 PC STD 3 1/2 Pot Carrier Standard 10 7/8 21 1/ ,200 AF 4 1/2 PC HD V 4 1/2 Pot Carrier Heavy Duty Vented 10 7/8 21 1/ ,800 AF 4 1/2 PCT STD V 4 1/2 Plant Carrying Tray Standard Vented 10 7/8 21 1/ ,200 AF 4 1/2 PWT HD 4 1/2 Plant Watering Tray Heavy Duty 10 7/8 21 1/ ,800 PC 670-6* 6 7/10-6 Pack N/A N/A 50 1,800 PC 800-2* 8-2 Pack , /2 PCT: round only. 4 1/2 PC:PWT: round or square. * Special order item-minimum order requirements apply Press Fit Trays EF 4-12 PFT GF 4-12 PFT TF 4-18 PFT AF 4-18 PFT Packaging Item Description Width Length Carton Pallet EF 4-12 PFT * E4-12 Pack 6 2/3 19 3/ ,850 GF 4-12 PFT G4-12 Pack ,400 TF 4-18 PFT T4-18 Pack ,600 AF 4-18 PFT A4-18 Pack 10 7/8 21 1/ ,200 EF compatible with T4", GF compatible with A4" * Special order item-minimum order requirements apply 22 Call your Regional Sales Manager or East Jordan Customer Service at

23 Plug and Propagation Trays Plug Trays Our plug and propagation trays are precision-engineered to exact tolerances. Whether you need to hand-stick rooted cuttings, or sow millions of seeds using the latest automated equipment, we can offer you the levels of consistent precision and repeatable performance you need. At EJP, our trays: Include round, square, hexagonal, and octagonal cells, vented and non-vented designs Include common element (CE), endless-thermoformed, vented or non-vented, precision punched, precision trimmed and soil saver version features Have uniform wall thickness that provides strong corners and bottoms Are designed for easy de-nesting PT 12E Circular 3 Vented PTA 36 Square 3 1/4 Vented PTT 50 Square 1 5/8 Vented PTT 50 Square 2 5/8 Vented PTT 50 Square 2 5/8 LC PT 50 Square 3 Strawberry PTA 58 Square OS 2 3/8 Vented PTT 72 Circular 2 PTT 72 Square 2 PTT 72 Circular LC 2 Vented PTA 72 Square 2 Vented PTA 72 Square 2 3/8 Vented 23

24 Plug and Propagation Trays PTT 84 Circular 1 1/2 Vented PTT 84 Square 1 5/8 Vented PTT 98 Circular 1 5/8 Vented PT 102 (2x51) Hex Uncut 1 5/8 Vented PT 102 (2x51) Hex Strip 1 5/8 Vented PT 105 Hexagonal 1 1/2 Vented PT 128 NV 1 3/8 PT 128 Square 1 7/8 PT 128E Octagonal 1 1/2 Vented PT 144 Octagonal 1 1/2 Vented PTT 200 Square 1 1/4 PT 200 Square 1 3/4 PT 288 Square 1 PT 288 Square Deep Medium 1 1/4 PT 288 Square Deep 1 5/8 24 Call your Regional Sales Manager or East Jordan Customer Service at

25 PT 288 Octagonal 1 3/16 Vented PT 338 Square 1 1/2 PT 392 Square 1 PT 406 Square 1 PT 512 Square 1 PT 512 Square 1 Vented PT 12E Circular 3 Vented 7 1/3 x 21 6 x /5 2 9/10 3/ ,000 PTA 36 Square 3 1/4 Vented 10 7/8 x 21 º 4 x 9 3 1/4 1 15/16 1 5/ ,200 PTT 50 Square 1 5/8 Vented 10 x x 5 1 5/8 1 1/2 1 3/16 11/ ,340 PTT 50 Square 2 5/8 Vented 10 x x 5 2 5/8 1 1/2 15/16 11/ ,160 PTT 50 Square 2 5/8 LC 10 x 20 5 x /8 1 13/16 1 5/16 5/ ,700 PT 50 Square 3 Strawberry 11 1/8 x x /8 1/2 3/ ,840 PTA 58 Square OS 2 3/8 Vented 10 7/8 x 21 1/4 5 x 11&12 2 3/8 1 7/16 3/4 3/ ,600 PTT 72 Circular 2 10 x x /4 5/8 3/ ,600 PTT 72 Square 2 10 x x /4 5/8 3/ ,600 PTT 72 Circular LC 2 Vented 10 x 20 6 x /2 1 3/ ,800 PTA 72 Square 2 Vented 10 7/8 x 21 1/4 6 x /2 15/16 3/ ,320 PTA 72 Square 2 3/8 Vented 10 7/8 x 21 1/4 6 x /8 1 1/2 13/16 3/ ,560 PTT 84 Circular 1 1/2 Vented 10 x x 7 1 1/2 1 1/16 11/16 3/ ,600 PTT 84 Square 1 5/8 Vented 10 x x 7 1 5/8 1 1/16 11/16 1/ ,600 PTT 98 Circular 1 5/8 Vented 10 x 20 7 x /8 1 5/16 15/16 3/ ,600 PT 102 (2x51) Hex Uncut 1 5/8 Vented 10 1/4 x 20 5/8 17 x 6 1 5/8 1 1/4 13/16 3/ ,760 PT 102 (2x51) Hex Strip 1 5/8 Vented 10 1/4 x 20 5/8 17 x 3 1 5/8 1 1/4 13/16 3/ ,760 PT 105 Hexagonal 1 1/2 Vented 11 1/8 x x 7 1 1/2 1 1/4 7/8 1/ ,920 PT 128 Square NV 1 3/ /20 x 20 2/5 16 x 8 1 3/8 1 3/20 9/ ,400 PT 128 Square 1 7/8 10 5/8 x 20 3/8 16 x 8 1 7/8 1 1/8 9/16 3/ ,400 PT 128E Octagonal 1 1/2 Vented 10 7/8 x 20 1/4 8 x /2 1 1/4 15/16 3/ ,200 PT 144 Octagonal 1 1/2 Vented 11 1/8 x x 8 1 1/2 1 1/16 11/16 3/ ,400 PTT 200 Square 1 1/4 10 x x /4 7/8 9/ ,520 PT 200 Square 1 3/4 11 1/8 x x /4 15/16 1/ ,840 PT 288 Square /8 x x /4 5/ ,240 PT 288 Square Deep Medium 1 1/4 11 1/8 x x /4 3/4 7/ ,240 PT 288 Square Deep 1 5/8 11 1/8 x x /8 3/4 7/ ,760 PT 288 Octagonal 1 3/16 Vented 11 1/8 x x /16 13/16 1/ ,400 PT 338 Square 1 1/2 11 1/8 x x /2 3/4 11/ ,920 or 2,880 PT 392 Square /8 x x /16 7/ ,240 PT 406 Square /8 x x /8 3/ ,240 PT 512 Square /8 x x /16 7/ ,240 PT 512 Square 1 Vented 11 1/8 x x /16 7/ ,240 Key: CE = Common Element; D = Deep; IM = Injection Molded; LC = Large Cell; NV = Non-vented; S = Soil Saver; V = Vented; VS = Vented Soil Saver 25

26 Plug and Propagation Trays CE Endless Plug Trays PT 288 CE NV 1 PT288 CE SS FV 1 PT 288 CE IM 1 PT 512 CE NV 15/16 PT 512 CE V 15/16 PT 512 CE VS 15/16 PT 288 CE NV /8 x 20 3/8 24 x /4 9/ ,240 PT 288 CE SS FV /8 x 20 3/8 24 x /4 9/ ,800 PT 288 CE IM 1 V 10 1/4 x 20 1/2 24 x /16 1/ ,692 PT 512 CE NV 15/ /8 x 20 3/8 32 x 16 15/16 9/16 7/ ,880 PT 512 CE V 15/ /8 x 20 3/8 32 x 16 15/16 9/16 7/ ,400 PT 512 CE VS 15/ /8 x 20 3/8 32 x 16 15/16 9/16 7/ ,920 Key: CE = Common Element; D = Deep; IM = Injection Molded; LC = Large Cell; NV = Non-vented; S = Soil Saver; V = Vented; VS = Vented Soil Saver Germinating Trays AF-GH Germinating Half Flat TF-GH Germinating Half Flat AF Germinating Flat TF Germinating Flat 20 Row Seedling Tray AF-GH Germinating Half Flat 10 7/8 x 10 7/8 N/A 148 cu in 2.56 qt 2.42 l 1 1/ ,600 TF-GH Germinating Half Flat* 10 x 10 N/A cu in 2.21 qt 2.09 l 1 1/ ,600 AF Germinating Flat 10 7/8 x 21 1/4 N/A 305 cu in 1.32 gal 5.0 l 1 1/ ,800 TF Germinating Flat* 10 x 20 N/A cu in 1.15 gal 4.35 l 1 1/ , Row Seedling Tray* 10 7/8 x 21 1/4 N/A 204 cu in 3.52 qt 3.34 l 1 1/ CS * Special order item-minimum order requirements apply 26 Call your Regional Sales Manager or East Jordan Customer Service at

27 Landscape Market Trays By By combining combining a a flat flat and and a a pack pack in in one one super super sturdy sturdy tray, tray, our our Landscape Landscape Market Market Trays Trays offer offer greater greater efficiency efficiency at at less less cost cost for for today s today s growers. growers. A A variety variety of of configurations configurations and and sizes sizes to to choose choose from from for for different different price price points points and and excellent excellent sell sell through. through. AF MT HMT LF-HALF 9-01 MT WMB LF-HALF MT LF-HALF MTL LF MT MT MT MT V MT SF MT TF-HALF MT TF-HALF MT TF MT AF MT 10 7/8 x 21 1/4 3 sq x 3 1/ fl oz 442 ml gal 7.96 l 100 2,640 HMT x /2 x 2 3/8 x 2 3/ fl oz ml qt 3.24 l 100 3,600 LF-HALF 9-01 MT WMB 7 1/2 x /4 x 3 x 3 7/ f l oz 285 ml qt 2.56 l 200 7,200 LF-HALF MT 7 1/2 x /5 x 2 1/10 x 3 1/ fl oz ml qt 2.17 l 200 8,400 LF-HALF MTL 7 1/2 x /5 x 2 1/10 x 3 3/ fl oz ml qt 2.33 l 200 7,920 LF MT 7 1/2 x /4 x 3 x 3 7/ fl oz ml gal 5.17 l 100 3,600 MT x 14 3/ x 3 3/4 x 3 1/ fl oz ml gal 4.75 l 100 3,600 MT 20-01* 12 x 16 1/4 3 x 3 x 3 1/ fl oz 330 ml gal 6.58 l 100 2,250 MT V 10 x 14 3/ /16 sq x 3 1/ fl oz ml gal 4.38 l 100 3,600 MT x 14 3/ /16 x 2 9/16 x 2 13/ fl oz ml gal 4.58 l 100 3,600 SF MT 8 1/2 x /2 x 2 x 2 7/ fl oz 95 ml gal 4.75 l 100 3,500 TF-HALF MT 10 x /16 x 3 1/8 x 3 1/ fl oz ml gal 3.78 l 100 4,320 TF-HALF MT* 10 x /8 x 2 3/8 x 3 1/ oz 185 ml qt 2.96 l 200 9,000 TF MT 10 x /4 sq x 3 1/ fl oz 416 ml gal 7.48 l 100 3,150 * Special order item-minimum order requirements apply 27

28 Liner Sheets Our New 24 (LA 24) and 32 (LA 32) Liner Sheets are lighter than a Plug Tray but strong and flexible to handle both Perennial and Nursery liner crops. LA 24 LA 32 LA /16 x 3 1/8 x fl oz 250 ml N/A N/A LA /2 x 2 1/2 x fl oz 175 ml N/A N/A 28 Call your Regional Sales Manager or East Jordan Customer Service at

29 Sheet of Pots A 18-01H A 18-01EH T 18-01D T 18-01XD (Formerly known as T 18-01M) (Formerly known as T 18-01H) S 18-01H E 12-01H G 12-01H P 20-01M P 20-01H V 15-01H Y 10-01H A 18-01H /8 x 3 1/8 x 3 1/ fl oz 399 ml 100 2,400 A18-01EH /8 x 3 1/8 x 3 7/16 N/A N/A N/A 100 2,400 or 28 CS T 18-01D 18 3 x 3 x fl oz 317 ml 100 4,500 T 18-01XD 18 3 x 3 x 3 1/ fl oz 373 ml 100 3,240 S18-01H /2 x 3 x 3 1/ fl oz 286 ml 100 5,000 E 12-01H * x 3 x 3 1/ fl oz 393 ml 100 5,400 G 12-01H * /8 x 3 x 3 1/ pt 473 ml 150 4,200 P 20-01M 20 3 x 3 x fl oz 321 ml 100 6,000 P 20-01H 20 3 x 3 x 3 ½ fl oz 401 ml 100 3,375 V 15-01H /5 x 3 4/5 x 3 1/ pt 662 ml 100 3,150 Y 10-01H /4 x 3 3/4 x 4 1/ pt 704 ml 100 3,200 *V 15-01H Sheet of Pots is compatible with PCSS

30 Injection Molded Trays Our new injection molded trays are designed and manufactured for use on automated destacking, filling, transplanting and transport equipment. Made of 100% recycled Horticultural containers they are strong enough to be reused until ready to be recycled again. WL 7520 WL WS 8520 WT 1020 WT 1006 WM WA 1121 STD WA 1121 HD STI TS STI TG - 6 TS WL 7520 L-Series Center Rib Web Flat 7 3/8 19 7/8 N/A 3,120 WL L-Series Web Flat 7 1/2 19 9/10 N/A 1,728 WS 8520 S-Series Center Rib Web Flat 8 3/8 19 7/8 N/A 3,520 WT 1020 T-Series Open Web Flat 9 7/8 19 7/8 N/A 2,250 WT 1006 WM T-Series Web Flat 9 7/8 19 7/8 N/A 2,520 WA 1121 STD A-Series Open Standard Web Flat 10 7/8 21 1/4 N/A 2,700 WA 1121 HD A-Series Open Heavy Duty Web Flat 10 7/8 21 1/4 N/A 2,700 STI TS 6.3 Trade Gallon Injection Molded Tray with Tag Slot - 6 Pack 12 1/2 18 3/4 N/A 1,200 STI TG - 6 TS 16 cm & 17 cm Gallon Injection Molded Tray - 6 Pack 13 1/8 19 3/4 N/A 1, Call your Regional Sales Manager or East Jordan Customer Service at

31 A Series Flats and Inserts A Series Flat (10 7/8 x 21 1/4 ) Our largest footprint flat and insert system, measuring 10 7/8 x 21 1/4. All A Series inserts have a variety of compatible A Series flats to meet any planting requirement, including Press-Fit square pots, and feature the following for greater efficiency and yield: Instant two-finger de-nesting, insert after insert Consistent cell thickness, producing uniform strength throughout the entire insert and preventing a paper-thin bottom Easy pack separation, due to clean and consistent trim with precise serrations Uniform drainage holes and channels for complete and even drainage of the cell SPECIAL NOTE: Some available in all guages. Check with your sales rep. AF Half Flat AF Open AF Open No Hole AF CRO AF 6 AF 8 AF 12 AF 12 OSR AF 12 SSR AF 18 AF Half Flat N/A N/A 200 4,000 N/A N/A AF Open 100 4, , ,800 AF Open No Hole N/A N/A 100 N/A 100 2,800 AF CRO 100 4, , ,800 AF , ,800 N/A N/A AF , , ,800 AF , ,200 N/A N/A AF 12 OSR* 100 4, ,200 N/A N/A AF 12 SSR* 100 4, ,200 N/A N/A AF , ,200 N/A N/A Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 31

32 A Series Flats and Inserts A Series Inserts (10 7/8 x 21 1/4 ) A 2-16 A 2-24 A 2-36 A 3-06 A 6-01 A 6-04 A 6-06 A 6-06H A 6-09 A 6-12 A 8-01 A 8-04 A 8-04H A 8-06 A 8-08 A 8-09 A 8-12 HD A A A A A A A A 12-04S A A 12-06S A 12-06H LS 32 Call your Regional Sales Manager or East Jordan Customer Service at

33 A A 18-01R A A 18-01H A 18-01EH A A 18-02R A 18-03R A 18-03T A 18-03TS A A 18-04S A A HD A HD 33

34 A Series Flats and Inserts A 2-16* /8 x 2 3/8 x 2 1/ fl oz 160 ml qt 2.35 l 100 4,000 A 2-24* /8 x 2 3/8 x 2 1/ fl oz 85 ml qt 2.04 l 200 4,800 A 2-36* /8 x 1 5/8 x 2 1/ fl oz 49 ml qt 1.76 l 200 4,800 A 3-06* /8 x 3 1/8 x 2 1/ fl oz 281 ml qt 1.69 l 200 4,800 A /4 x 6 9/16 x 2 1/ qt 999 ml qt 999 ml 200 4,800 A /4 x 3 1/16 x 2 1/ fl oz 188 ml pt 753 ml 200 4,800 A /4 x 2 x 2 1/ fl oz 114 ml pt 688 ml 200 4,800 A 6-06H /16 x 2 3/8 x 3 1/ fl oz 188 ml qt 1.13 l 100 3,840 A /2 x 2 1/8 x 2 1/ fl oz 70 ml pt 634 ml 200 4,800 A 6-12* /2 x 1 1/2 x 2 1/ fl oz 49 ml pt 589 ml 100 4,000 A /4 x 4 3/4 x 2 1/ pt 737 ml pt 737 ml 200 4,800 A /8 x 2 3/8 x 2 1/ fl oz 147 ml pt 589 ml 200 4,800 A 8-04H /8 x 2 3/8 x 3 1/ fl oz 213 ml pt 852 ml 100 3,840 A /2 x 2 3/8 x 2 1/ fl oz 85 ml pt 511 ml 200 4,800 A /8 x 2 3/8 x 2 1/ fl oz 63 ml pt 511 ml 200 4,800 A 8-09* /2 x 1 1/2 x 2 1/ fl oz 47 ml fl oz 427 ml 200 4,800 A 8-12 HD* /8 x 1 1/2 x 2 1/ fl oz 40 ml pt 491 ml 100 4,000 A /4 x 4 3/4 x 2 1/ pt 586 ml pt 586 ml 200 4,800 A /8 x 2 3/8 x 2 1/ fl oz 111 ml fl oz 445 ml 200 4,800 A /16 x 1 7/8 x 2 1/ fl oz 65 ml fl oz 393 ml 200 4,800 A /16 x 4 3/4 x 2 1/ fl oz 404 ml fl oz 404 ml 200 4,800 A /4 x 3 1/16 x 2 1/ fl oz 188 ml fl oz 376 ml 200 4,800 A /2 x 3 1/8 x 2 1/ fl oz 116 ml fl oz 349 ml 200 4,800 A /2 x 2 1/4 x 2 1/ fl oz 80 ml fl oz 321 ml 200 4,800 A 12-04S /2 x 2 1/4 x 2 1/ fl oz 90 ml fl oz 360 ml 200 4,800 A /2 x 1 1/2 x 2 1/ fl oz 49 ml fl oz 294 ml 200 4,800 A 12-06S /2 x 1 1/2 x 2 1/ fl oz 65 ml fl oz 393 ml 200 4,800 A 12-06H LS* /2 x 1 1/2 x 3 1/ fl oz 68 ml fl oz 412 ml 100 3,840 A 14-01* /16 x 4 3/4 x 2 1/ fl oz 349 ml fl oz 349 ml 200 4,800 A 18-01R* 18 2 x 4 7/8 x 2 1/ fl oz 253 ml fl oz 253 ml 100 4,000 A /8 x 3 1/8 x 2 1/ fl oz 281 ml fl oz 281 ml 200 4,800 A 18-01H /8 x 3 1/8 x 3 1/ fl oz 399 ml fl oz 399 ml 100 2,400 A 18-01EH /8 x 3 1/8 x 3 7/ fl oz 422 ml N/A N/A N/A 100 2,400 or 28 CS A 18-02* /2 x 3 1/8 x 2 1/ fl oz 119 ml fl oz 239 ml 200 4,800 A 18-02R* 36 2 x 2 7/16 x 2 1/ fl oz 117 ml fl oz 235 ml 200 4,800 A 18-03R* 54 2 x 1 5/8 x 2 1/ fl oz 75 ml fl oz 226 ml 200 4,800 A 18-03T* 54 3 cells 2 1/4 deep fl oz 73 ml fl oz 221 ml 200 4,800 A 18-03TS* 54 3 semi cells 2 1/4 deep fl oz 83 ml fl oz 248 ml 100 4,000 A /2 x 1 1/2 x 2 1/ fl oz 47 ml fl oz 190 ml 200 4,800 A 18-04S* /8 x 1 3/8 x 2 1/ fl oz 52 ml fl oz 209 ml 200 4,800 A /4 x 3 1/16 x 2 1/ fl oz 188 ml fl oz 188 ml 200 4,800 A HD* /4 x 2 x 2 1/ fl oz 113 ml fl oz 113 ml 100 4,000 A HD /4 x 1 7/16 x 2 1/ fl oz 75 ml fl oz 75 ml 100 4,000 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 34 Call your Regional Sales Manager or East Jordan Customer Service at

35 T Series Flats and Inserts T Series Flat (10 x 20 ) T Series, or true flats and inserts, utilize a space-saving 10 x 20 footprint. However, they have virtually the same soil volume as the A Series insert, because the T Series inserts are a full 3/8 deeper. The result is more flats per bench, cart, truck and retail facing. Using attention-grabbing tags in the built-in tag slot is an excellent way to display information to the retail customer or highlight programs SPECIAL NOTE: Some available in all guages. Check with your sales rep. TF Half Flat TF Open TF CRO TF 3 TF 3-16 TF 6 TF 6 HR TF 8 TF

36 T Series Flats and Inserts TF WM TF 12 TF 12 OSR TF 18 TF 18 SCR TT18-01* (Formerly known as PCSS325-18) * T18-01D & T18-01XD are compatible with the TT18-01 TF Half Flat N/A N/A 200 6,300 N/A N/A TF Open 100 4, ,050 N/A N/A TF CRO 100 4, ,050 N/A N/A TF ,500 N/A N/A N/A N/A TF 3-16* 100 4,500 N/A N/A N/A N/A TF , ,050 N/A N/A TF 6 HR 100 4, ,050 N/A N/A TF , ,050 N/A N/A TF , ,050 N/A N/A TF WM 100 4,140 N/A N/A N/A N/A TF , ,050 N/A N/A TF 12 OSR 100 4, ,050 N/A N/A TF , ,050 N/A N/A TF 18 SCR 100 4, ,050 N/A N/A TT ,600 N/A N/A N/A N/A Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 36 Call your Regional Sales Manager or East Jordan Customer Service at

37 T Series Inserts (10 x 20 ) T 2-09H T 2-16 T 2-24H LS T 3-06H SQ T 3-06 Super Pk (3pk per tray) T 3-16H LS T 4-08 T 4-12H LS T 6-06H T 6-06H LS T 6-06H SS T 8-04 T 8-04H T 8-04EH T 8-06 T 8-06 SCC T 8-06H LS T 9-06H LS T T 10-06H LS T 10-06EH LS T T T T 12-04S T 12-04SS T 12-04H LS T 12-06H LS T T 18-01D T 18-01XD T 18-01R (Formerly known as T 18-01M) (Formerly known as T 18-01H) 37

38 T Series Flats and Inserts T T 18-02R T 18-03RH T 18-03R T 18-03RS * Black Dots = Handle Hole Placement T 18-03T T 18-03TS T 2-09H* x 3 x 3 1/ fl oz 373 ml qt 3.35 l 100 3,240 T 2-16* /16 x 2 5/16 x 2 5/ fl oz 160 ml qt 2.56 l 200 5,400 T 2-24H LS* /16 x 2 5/16 x 3 1/ fl oz 95 ml qt 2.28 l 100 3,600 T 3-06H SQ /16 x 3 11/16 x 3 1/ fl oz 360 ml qt 2.16 l 100 4,860 T 3-06 Super Pk (3pk per tray)* /4 x 6 1/ fl oz 283 ml qt 1.70 l ,960 T 3-16H LS /16 x 1 9/16 x 3 1/ fl oz 122 ml qt 1.97 l 100 3,780 T /16 x 2 5/16 x 2 5/ fl oz 160 ml qt 1.28 l 200 5,400 T 4-12H LS /16 x 2 5/16 x 3 1/ fl oz 95 ml qt 1.14 l 100 4,500 T 6-06H /8 x 2 5/16 x 3 1/ fl oz 190 ml qt 1.14 l 100 3,600 T 6-06H LS /8 x 2 5/16 x 3 1/ fl oz 167 ml qt 1.00 l 100 3,600 T 6-06H SS /8 x 2 5/16 x 3 1/ fl oz 150 ml pt 904 ml 100 5,400 T /16 x 2 5/16 x 2 5/ fl oz 160 ml pt 642 ml 200 5,400 T 8-04H /16 x 2 5/16 x 3 1/ fl oz 204 ml pt 819 ml 100 4,320 T 8-04EH* /16 x 2 3/16 x 4 1/ fl oz 254 ml qt 1.01 l 100 3,420 T /2 x 2 5/16 x 2 5/ fl oz 93 ml pt 560 ml 200 5,400 T 8-06 SCC /2 x 2 5/16 x 2 5/ fl oz 93 ml pt 560 ml 200 5,400 T 8-06H LS /2 x 2 5/16 x 3 1/ fl oz 122 ml pt 737 ml 100 4,500 T 9-06H LS* /2 x 2 5/16 x 3 1/ fl oz 130 ml pt 781 ml 100 3,600 T /16 x 1 7/8 x 2 5/ fl oz 119 ml pt 476 ml 200 5,400 T 10-06H LS /5 x 1 1/2 x 3 1/ fl oz 110 ml pt 663 ml 100 4,050 T 10-06EH LS /4 x 1 1/2 x 3 7/ fl oz 128 ml pt 770 ml 100 3,600 T /16 x 3 x 2 5/ fl oz 467 ml fl oz 467 ml 200 5,400 T x 1 1/2 x 2 5/ fl oz 124 ml fl oz 373 ml 200 5,400 T /16 x 1 1/2 x 2 5/ fl oz 95 ml fl oz 380 ml 200 5,400 T 12-04S /16 x 1 1/2 x 2 5/ fl oz 98 ml fl oz 393 ml 200 5,400 T 12-04SS /16 x 1 1/2 x 2 5/ fl oz 81 ml fl oz 327 ml 200 5,400 T 12-04H LS /16 x 1 1/2 x 3 1/ fl oz 111 ml fl oz 445 ml 100 3,600 T 12-06H LS* /2 x 1 1/2 x 3 1/4 Äù fl oz 68 ml fl oz 409 ml 100 3,240 T x 3 x 2 5/ fl oz 296 ml fl oz 296 ml 200 5,400 T 18-01D x 3 x fl oz 317 ml fl oz 317 ml 100 4,500 T 18-01XD x 3 x 3 1/ fl oz 373 ml fl oz 373 ml 100 3,240 T 18-01R* /8 x 1 7/8 x 2 5/ fl oz 273 ml fl oz 273 ml 200 5,400 T 18-02* 36 3 x 1 1/2 x 2 5/ fl oz 127 ml fl oz 255 ml 200 5,400 T 18-02R* /16 x 1 7/8 x 2 5/ fl oz 122 ml fl oz 245 ml 200 5,400 T 18-03RH* /2 x 1 7/8 x 3 1/4 Äù fl oz 98.3 ml fl oz 295 ml 100 5,400 T 18-03R* /8 x 1 1/2 x 2 5/ fl oz 73 ml fl oz 221 ml 200 5,400 T 18-03RS* /8 x 1 1/2 x 2 5/ fl oz 95 ml fl oz 285 ml 200 5,400 T 18-03T* 54 3 cells 2 5/8 deep fl oz 91 ml fl oz 275 ml 200 5,400 T 18-03TS* 54 3 semi cells 2 5/8 deep fl oz 95 ml fl oz 285 ml 200 5,400 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 38 Call your Regional Sales Manager or East Jordan Customer Service at

39 S Series Flats and Inserts S Series Flat (8 1/2 x 20 ) The S Series has an 8 1/2 x 20 footprint. To support the inserts, S Series flats have matching full-height support ribs to withstand the rigors of automation from transplanting to shipping. Another advantage of the S Series is the ease of labeling it offers to price and identify your crop. SPECIAL NOTE: Some available in all guages. Check with your sales rep. SF 2 SF 3 SF 4 SF4-10 SF 5 SF

40 S Series Flats and Inserts SF 8 SF 10 Low Rib* SF 12 SF 12 FS SF 18 SF 18 SCR SF ,000 N/A N/A N/A N/A SF ,000 N/A N/A N/A N/A SF ,500 N/A N/A N/A N/A SF ,000 N/A N/A N/A N/A SF ,500 N/A N/A N/A N/A SF ,000 N/A N/A N/A N/A SF ,000 N/A N/A N/A N/A SF 10 Low Rib* 100 5,000 N/A N/A N/A N/A SF , ,000 N/A N/A SF 12 FS 100 5,500 N/A N/A N/A N/A SF ,000 N/A N/A N/A N/A SF 18 SCR 100 5,000 N/A N/A N/A N/A Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 40 Call your Regional Sales Manager or East Jordan Customer Service at

41 S Series Inserts (8 1/2 x 20 ) S 2-08H S 2-09H S 2-24H S 3-06 SQ S 3-09H S 4-06H S 4-10 LS S 4-12H S 5-08H LS S 6-06H S 6-06H LS S 6-06EH LS S 8-06H LS S 10-04L LS S 10-04H LS S S S S LS S FC S S S 12-04H LS S 18-01H S 18-02H S 18-02RH S 18-03RH Black Dots = Handle Hole Placement 41

42 S Series Flats and Inserts Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet S 2-08H * /4 x 3 7/8 x 3 1/ fl oz ml qt 2.63 l 100 5,000 S 2-09H * /2" x 3" x 3 1/4" fl oz 286 ml qt 2.58 l 100 3,600 S 2-24H * /4" x 1 1/4" x 3 1/4" fl oz 93 ml qt 2.24 l 100 3,600 S 3-06 SQ /2" x 3" x 3" fl oz 272 ml qt 1.62 l 100 6,000 S 3-09H * /2" x 2" x 3" fl oz 167 ml qt 1.50 l 100 3,000 S 4-06H /16" x 2 9/16" x 3 1/2" fl oz 200 ml qt 1.2 l 100 4,500 3,900 S 4-10 LS /8" x 1 13/16" x 2 3/4" fl oz 106 ml qt 1.06 l 200 5,000 S 4-12H * /4" x 1 1/4" x 3 1/4" fl oz 93 ml qt 1.12 l 100 5,000 S 5-08H LS /16" x 1 3/4" x 3 1/4" fl oz 121 ml qt 968 ml 100 5,400 S 6-06H 36 2" x 2 1/8" x 3 1/4" fl oz 147 ml pt 884 ml 100 5,000 S 6-06H LS * /8" x 2 1/16" x 3 1/4" fl oz 136 ml pt 816 ml 100 5,000 S 6-06EH LS * /8" x 2 1/16" x 3 1/2" fl oz 155 ml pt 934 ml 100 3,000 S 8-06H LS 48 2" x 2 1/4" x 3 1/4" fl oz 96 ml pt 580 ml 100 5,000 S 10-04L LS* /8" x 1 3/4" x 2 3/4" fl oz 103 ml fl oz 416 ml ,000 5,600 S 10-04H LS /8" x 1 3/4" x 3 1/4" fl oz 114 ml fl oz 458 ml 100 5,000 S /8" x 3" x 2 3/4" fl oz 414 ml fl oz 414 ml 200 6,000 S /4" x 3" x 2 3/4" fl oz 104 ml fl oz 314 ml 200 6,000 S /16" x 1 1/2" x 2 3/4" fl oz 77 ml fl oz 308 ml 200 6,000 S LS /16" x 1 1/2" x 2 3/4" fl oz 77 ml fl oz 308 ml 200 6,000 S FC /16" x 1 1/2" x 2 3/4" fl oz 83 ml fl oz 334 ml 200 6,000 S S /16" x 1 1/2" x 2 3/4" fl oz 91 ml fl oz 367 ml 200 6,000 S 12-04H LS /2" x 2" x 3 1/4" fl oz ml fl oz 410 ml 100 5,000 S 18-01H /2" x 3" x 3 1/4" fl oz 286 ml fl oz 286 ml 100 5,000 S 18-02H * /2" x 1 1/2" 3 1/4" fl oz 110 ml fl oz 220 ml 100 5,000 S 18-02RH * 36 2" x 1 7/8" x 3 1/4" fl oz 122 ml fl oz 245 ml 100 4,600 S 18-03RH * /16" x 1 7/8" x 3 1/4" fl oz 75 ml fl oz 225 ml 100 5,000 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 42 Call your Regional Sales Manager or East Jordan Customer Service at

43 L Series Flats and Inserts L Series Flat (7 1/2 x 20 ) The L Series offers a 7 1/2 x 20 footprint. The L 6-06H LS insert is an excellent way to save space and accepts an adhesive label. We produce a special-sized insert for the LF 6 and LF 10 flats. They are the C 6-06H and the C 10-04H LS, which measure 7 3/4 x 20. The high center rib in these flats improves stacking strength. SPECIAL NOTE: Some available in all gauges. Check with your sales rep. LF 2 LF 3 LF 3 (Punched) LF 4 WMB LF 5 LF 6 LF 6 (Punched) LF 8 LF12 LF ,600 N/A N/A N/A N/A LF ,600 N/A N/A N/A N/A LF 3 P (Punched) 200 6,600 N/A N/A N/A N/A LF 4 WMB 150 6,600 N/A N/A N/A N/A LF ,600 N/A N/A N/A N/A LF ,600 N/A N/A N/A N/A LF 6 P (Punched) 200 6,600 N/A N/A N/A N/A LF ,600 N/A N/A N/A N/A LF ,600 N/A N/A N/A N/A Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; 43

44 L Series Flats and Inserts L Series Inserts (7 1/2 x 20 ) L 3-04 SQ L 3-06H SQ L 3-09 LS L4-06 EH LS L 5-08H LS L 6-06H LS L 8-04H LS L 8-06H LS L 8-06SEH LS L 12-04H LS L 3-04 SQ /8 x 3 3/8 x 3 7/16 N/A 14.8 fl oz 437 ml N/A 1.84 qt 1.75 l 200 6,600 L 3-06H SQ /16 x 2 7/8 x 3 7/ fl oz 258 ml qt 1.55 l 100 3,960 L 3-09 LS* /8 x 2 3/16 x 3 1/ fl oz 139 ml qt 1.25 l 100 6,600 L 4-06EH LS /16 x 2 3/16 x 3 3/ fl oz 221 ml qt 1.32 l 100 3,960 L 5-08H LS /16 x 1 13/16 x 3 1/ fl oz 111 ml pt 893 ml 100 6,000 L 6-06H LS /8 x 2 1/16 x 3 1/ fl oz 127 ml pt 767 ml 200 6,600 L 8-04H LS /8 x 2 3/8 x fl oz 140 ml pt 560 ml 100 7,200 L 8-06H LS /16 x 1 11/16 x 3 1/ fl oz 90.8 ml pt ml 100 7,200 L 8-06SEH LS /16 x 1 11/16 x fl oz ml pt 719 ml 100 4,800 L 12-04H LS /2 x 1 11/16 x 3 1/ fl oz 94 ml fl oz 376 ml 200 6,600 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Black Dots = Handle Hole Placement * Special order item-minimum order requirements apply 44 Call your Regional Sales Manager or East Jordan Customer Service at

45 C, CT, E, G, K, P, Y Series Flats and Inserts C Series Inserts (7 3/4 x 20 ) C 6-06H C 10-04H LS Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet C 6-06H * /2" x 1 7/8" x 3 1/4" fl oz ml pt 772 ml 200 6,600 C 10-04H LS * /4" x 1 13/16" x 3 1/4" fl oz 105 ml fl oz 422 ml 100 6,600 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; NOTE: C inserts are 7 3/4 x 20 and fit the corresponding L Series Flats * Special order item-minimum order requirements apply CT Series Flats & Inserts (11 1/2 x 14 3/4 ) The CT Series represents an 11 1/2 x 14 3/4 flat which has long been called the Connecticut Flat. CTF 5 CTF 8 CT 5-08 LS CT 8-06 LS Economy Weight Standard Weight Heavy Duty Weight Item No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet CTF 5 N/A N/A N/A 4,200 N/A N/A CTF 8 N/A N/A N/A 3,600 N/A N/A Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet CT 5-08 LS /16" x 2 5/8" x 2 3/4" fl oz 105 ml pt 840 ml N/A 6,000 CT 8-06 LS /8" x 1 5/8" x 2 3/4" fl oz 84 ml pt 504 ml N/A 6,600 Key: Key: CRO CRO = Center = Center Rib Only; Rib Only; D = Deep; D = Deep; EH = Extra EH = High; Extra FC High; = Full FC Cell; = Full FS = Cell; Full FS Side; = H Full = High; Side; HD H = High; Heavy HD Duty; = Heavy HR = High Duty; Rib; HR LS = High Label Rib; Side; LS M = Label Medium; Side; OSR M = Offset Medium; Rib; OSR P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; 45

46 C, CT, E, G, K, P, Y Series Flats and Inserts E Series Flats & Inserts (6 2/3 x 19 3/4 ) The E Series footprint is 6 2/3 x 19 3/4. The EF Press-Fit Tray is quite versatile in that it will accept either an E 12-01H sheet of pots or 12 individual T4 Square Press-Fit pots. EF 4-12 PFT E 12-01H Economy Weight Standard Weight Heavy Duty Weight Item No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet EF 4-12 PFT * N/A N/A 150 5,850 N/A N/A Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet E 12-01H * 12 3" x 3" x 31/4" fl oz 393 ml fl oz 393 ml 100 5,400 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 46 Call your Regional Sales Manager or East Jordan Customer Service at

47 G Series Flats & Inserts (7 x 21 ) With its 7 x 21 footprint, the G Series is a space-saving design with several insert and pot options. The G 6-06H LS and G 6-06EH LS provide two soil volumes while maintaining a label-friendly sidewall. The G 12-01H insert may be used as a two- row sheet-of-pots system with the GF 4-12 flat. The A4 Press-Fit pots may also be used with the GF 4-12 flat, making an attractive retail presentation. GF 6 GF 4-12 PFT G 6-06H LS G 6-06EH LS G 12-01H Economy Weight Standard Weight Heavy Duty Weight Item No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet GF 6 * 200 6, ,000 N/A N/A GF 4-12 PFT * 150 6, ,400 N/A N/A Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet G 6-06H LS * /8" x 2 1/16" x 3 1/4" fl oz 119 ml pt 717 ml 100 6,600 G 6-06EH LS * /8" x 2 1/16" x 3 1/2" fl oz 134 ml pt 806 ml 100 6,050 G 12-01H * /8" x 3" x 3 1/4" pt 473 ml fl oz 473 ml 150 4,200 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 47

48 C, CT, E, G, K, P, Y Series Flats and Inserts K Series Flats & Inserts (8 x 20 ) With an 8 x 20 footprint, the K Series provides a space-saving option without compromising your crop. The high center rib in the KF 6 flat significantly improves stacking strength. KF 2 KF 6 KF 10 Deep K 2-16EH LS K 6-06H K 10-04EH LS Economy Weight Standard Weight Heavy Duty Weight Item No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet No. Per Carton No. Per Pallet KF 2 * N/A N/A 100 5,500 N/A N/A KF 6 * 100 5, ,500 N/A N/A KF 10 Deep * N/A N/A 100 5,500 N/A N/A Volume Per Cell Volume Per Pack Packaging Item Accepts Label Accepts Handle No. of Cells Cell Dimensions W x L x H Cubic Inches Liquid Measure Liquid Measure U.S. Metric Cubic Inches U.S. Metric Carton Pallet K 2-16EH LS * /8" x 1 7/8" x 4 1/4" fl oz 201 ml qt 3.21 l 100 2,860 K 6-06H * /8" x 2 5/16" x 3 1/4" fl oz 134 ml pt 806 ml 100 5,600 K 10-04EH LS * /10" x 1 4/5" x 4 1/4" fl oz ml pt 557 ml 100 4,620 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 48 Call your Regional Sales Manager or East Jordan Customer Service at

49 P Series Flats & Inserts (13 x 16 ¼ ) TP20-01 (Formerly known as PCSS325-20) P 20-01M P 20-01H TP ,000 N/A N/A N/A N/A P 20-01M x 3 x fl oz 321 ml fl oz 321 ml 100 6,000 P 20-01H x 3 x 3 ½ fl oz 401 ml fl oz 401 ml 100 3,375 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; 49

50 C, CT, E, G, K, P, Y Series Flats and Inserts Y Series Flats & Inserts (8 1/2 x 21 ) With an 8 1/2 x 21 footprint, the Y Series system has several distinct options. The Y 6-06H LS and Y 12-04H LS inserts both fit the YF6 flat. Our YF 8 flat is made for the Y8-06H LS. The YF 10 flat is paired with the Y 10-01H square sheet of pots. Our YF 12 flat accepts the Y 12-04H LS. YF 6 YF 8 YF 10 YF 12 Y 6-06H LS Y 8-06H LS Y 10-01H Y 12-04H LS YF 6* 200 5,000 N/A N/A N/A N/A YF 8* 100 5,000 N/A N/A N/A N/A YF 10 N/A N/A 100 5,000 N/A N/A YF 12* 100 5,000 N/A N/A N/A N/A Y 6-06H LS* /4 x 2 x 3 1/ fl oz 147 ml pt 884 ml 100 4,000 Y 8-06H LS* /16 x 1 15/16 x 3 1/ fl oz 98 ml pt 589 ml 100 5,000 Y 10-01H /4 x 3 3/4 x 4 1/ pt 704 ml pt 704 ml 100 3,200 Y 12-04H LS* /2 x 2 1/4 x 3 1/ fl oz 93 ml fl oz 373 ml 100 5,000 Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 50 Call your Regional Sales Manager or East Jordan Customer Service at

51 Compatibility Charts A Series Flats & Inserts (10 7/8 x 21 1/4 ) Item AF Open AF CRO AF 6 AF 8 AF 12 AF 12 OSR AF 12 SSR AF 18 WA 1121 STD WA 1121 HD A 2-16 * A 2-24 * A 2-36 * A 3-06 * A 6-01 A 6-04 A 6-06 A 6-06H A 6-09 A 6-12 * A 8-01 A 8-04 A 8-04H A 8-06 A 8-08 A 8-09* A 8-12 HD* A A A A A A A A 12-04S A A 12-06S A 12-06H LS* A * A 18-01R * A A 18-01H A 18-01EH A * A 18-02R * A 18-03R * A 18-03T * A 18-03TS * A A 18-04S * A A HD * A HD Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 51

52 Compatibility Charts T Series Flats & Inserts (10 x 20 ) Item TF Open TF CRO TF 3 TF 3-16 TF 6 TF 8 TF 10 TF WM TF 12 TF 12 OSR TF 18 TF 18 SCR TT WT 1020 WT 1006 WM T 2-09H * T 2-16 * T 2-24H LS * T 3-06H SQ T 3-06 Super Pk (3pk per tray) * T 3-16H LS * T 4-08 * T 4-12H LS * T 6-06H T 6-06H LS T 6-06H SS T 8-04 T 8-04H T 8-04EH * T 8-06 T 8-06 SCC T 8-06H LS T 9-06H LS * T T10-06H LS T 10-06EH LS T T T T 12-04S T 12-04SS T 12-04H LS T 12-06H LS * T T 18-01D T 18-01XD T 18-01R * T * T 18-02R * T 18-03RH * T 18-03R * T 18-03RS * T 18-03T * T 18-03TS * Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply 52 Call your Regional Sales Manager or East Jordan Customer Service at

53 S Series Flats & Inserts (8 1/2 x 20 ) Item SF 2 SF 3 SF 4 SF 4-10 SF 5 SF 6 SF 8 SF 10 Low SF 12 SF 12 FS SF 18 SF 18 SCR WS 8520 S 2-08H * S 2-09H * S 2-24H * S 3-06 SQ S 3-09H * S 4-06H Key: CRO = Center Rib Only; D = Deep; EH = Extra High; FC = Full Cell; FS = Full Side; H = High; HD = Heavy Duty; HR = High Rib; LS = Label Side; M = Medium; OSR = Offset Rib; P = Punched; R = Rectangular; S = Semi-Cell; SCC = Special Cell Configuration; SCR = Single Center Rib; SQ = Square; SS = Soil Saver; SSR = Special Side Rib; T = Triangular; * Special order item-minimum order requirements apply L Series Flats & Inserts (7 1/2 x 20 ) Item LF 2 LF3 LF3 P (Punched) LF4 WMB LF 5 LF 6 LF 6 P (Punched) LF8 LF12 WL 7520 WL L 3-04 SQ L 3-06H SQ L 3-09 LS* L4-06EH LS L 5-08H LS L 6-06H LS L 8-04H LS L 8-06H LS L 8-06SEH LS L 12-04H LS LFH 9-01 MT LFH MT S 4-10 LS S 4-12H * S 5-08H LS LFH MTL S 6-06H S 6-06H LS * S 6-06EH LS * S 8-06H LS S 10-04L LS S 10-04H LS S S S S LS S FC S S S 12-04H LS S 18-01H S 18-02H * S 18-02RH * S 18-03RH * C Series Flats & Inserts (7 3/4 x 20 ) Item LF 5 LF 6 LF 6 P (Punched) WL 7520 C 6-06H * C 10-04H LS * * Special order item-minimum order requirements apply 53

54 PRODUCT COLOR GUIDE Choose from a variety of EJP stock colors for your products with our color guide! Please keep in mind that these are approximate colors and there may be some variation when produced. Minimum quantities may apply and may be subject to production run schedule. 2945A BLUE 504A BURGUNDY 472A CHOCOLATE 429A GRAY 360A GREEN GREEN 7530A MOCHA 205A PINK 2665A PURPLE 271A PURPLE 200A RED TERRACOTTA 107A YELLOW 021A ORANGE 54 Call your Regional Sales Manager or East Jordan Customer Service at

55 Thank you for growing with us for 70 years! 55

56 East Jordan, Michigan Beaverton, Michigan South Haven, Michigan Manufacturing and Recycling Plant South Haven, Michigan - Distribution Warehouse The Responsible Choice For Horticultural Containers 6400 M-32 Highway, P.O. Box 575, East Jordan, Michigan, Phone: Fax: East Jordan Plastics, Inc 56 Call your Regional Sales Manager or East Jordan Customer Service at