Trenchers for Long distance networks installation
|
|
- Dwayne Quinn
- 5 years ago
- Views:
Transcription
1 Main Technical Specifications s for Long distance networks installation MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW DIG DEPTH / DIG WIDTH CHAINSAW DIG DEPTH / DIG WIDTH BUCKET WHEEL DIG DEPTH / DIG WIDTH ROCK HAWG DIG DEPTH / DIG WIDTH 775DT 5 hp (168 kw) Caterpillar C6.6 ACERT 34,171-55,000 lbs ( kg) 0-8 (0-244 cm) (25-61 cm) 6 6 (198 cm) (46-76 cm) hp (146 kw) Caterpillar C6.6 ACERT 39,683-46,297 lbs ( kg) 3-5 ( cm) 8-18 (20-45 cm) hp (242 kw) Caterpillar C9 ACERT 55,116-72,752 lbs ( kg) (0-127 cm) 6-12 (15-30 cm) 4-10 (1-305 cm) (30-91 cm) hp (242 kw) Caterpillar C9 ACERT 87,000-92,000 lbs ( kg) 0-7 (0-213 cm) ( cm) hp (328 kw) Caterpillar C13 ACERT 99,208 lbs ( kg) (0-137 cm) 6-14 (15-36 cm) 1150XHD 440 hp (328 kw) Caterpillar C13 ACERT 110, ,278 lbs ( kg) 6-12 ( cm) ( cm) 1175XHD 440 hp (328 kw) Caterpillar C13 ACERT 126, ,000 lbs ( kg) 3-9 ( cm) ( cm) 1275L 540 hp (403 kw) Caterpillar C15 ACERT 150,000 lbs ( kg) 0-5 (0-152 cm) 8-16 (20-41 cm) hp (403 kw) Caterpillar C15 ACERT 160, ,000 lbs ( kg) 3-9 ( cm) ( cm) hp (470 kw) Caterpillar C18 ACERT 210, ,000 lbs ( kg) ( cm) ( cm)
2 Dirt series 775DT CS THE NEW 775DT IS THE FIRST LIGHT CHAINSAW TRENCHER SPECIFICALLY DEVELOPED FOR DIRT EXCAVATION AND DRAINAGE WORKS. LIGHT WEIGHT AND ROBUSTNESS, TRANSPORTABILITY, PRODUCTIVITY AND RELIABILITY, AND VERY HIGH USER FRIENDLINESS THANKS TO THE BRAND NEW ELECTRONIC CONTROL TRENCHTRONIC 3.0 ARE THE MAIN CHARACTERISTIC OF THIS MACHINE. powered by 0200
3 775DT Dirt Series Chainsaw Specification "B" 2'-1" [63cm] 10'-2" [310cm] * "A" 11'-1.9" [340cm] 230 5'-10" [178cm] 8' ft MACHINE SHOWN MIN 10" [25cm] MAX 24" [61cm] 8'-4" [255cm] 2'-7" [80cm] * Dimension 10 2 [310 cm] becomes 10 4 [315 cm] in the case of using single grouser. BOOM A B (183 cm) 29-4 (895 cm) 8 8 (244 cm) 31-5 (959 cm) Standard Features Pressurized cab with air conditioning, heating, sound suppression and ROPS structure TrenchTronic 3.0 electronic machine control with: Operator selectable digging pressure and automatic operation Fully automatic operation Remote diagnostic system Electrical system: 24 V Self-leveling (tilting) undercarriage: Track tilt angle: 10 Automatic/manual operation Trenching Dimensions Max depth...8 (244 cm) Widths range (25-61 cm) Note: ask to Tesmec s Technical Department for the max width at max depth confi guration Engine Model...CAT C6.6 TA Tier 3 Max horsepower...5 hp (168 kw) Max no load rpm rpm Fuel tank capacity gal (460 l) Fuel consumption gal/hr (46 l/hr) at full load Cooling rating adequate for 130 F (54.4 C) ambient air temperature Air cleaner: dry type 2 stages with pre-cleaner and automatic dust ejection Operating and Transport Weight Weight...34,171-41,887 lbs...( kg) Ground pressure psi...( kg/cm 2 ) Drive Hydrostatic: one pump and one motor capable of transmitting full engine horsepower Flywheel gearbox Infinitely variable digging chain speeds fpm (0-259 m/min) Tesmec designed single strand, 4 1/2 (11.4 cm) pitch chain, K style Single piece, light boom for dirt & soft soil Standard cutters: single edge, hard surfaced cup cutters for dirt Crawler Drive Hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed range mph (0-3.3 km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (340 cm) Track pad type: single grouser, chamfered edges Track chain type: FL6 Track pad width (80 cm) Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...53 gpm (201 l/min) Pressure setting psi (180 bar) Oil tank capacity...77 gal (290 l) Cross Conveyor Pressure and flow compensated pump with dual hydraulic drive motors reversible and shiftable Belt speed infinitely variable fpm (0-250 m/min) Discharge direction: right or left Conveyor belt width (76 cm) Conveyor length (254 cm) Discharge height (152 cm) Transport Dimensions Length with 8 boom (959 cm) and crumbshoe Width (255 cm) Height (310 cm) Available Devices Work light package: 24 V, for night use Automatic laser control system for depth control (Trimble make) Hydraulic crumbshoe Automatic laying system for pipes, including: gravel hopper laying crumbshoe guide rollers horizontal axis reel carrier: max. reel diameter: 5 (152 cm) max. reel weight: 940 kg 0200
4 Dirt series 775DT BW BUCKET WHEEL VERSION OF THE 775DT CS, THIS LIGHT BUCKET-TRENCHER CAN GRANT AN EVEN AN EVEN HIGHER PRODUCTIVITY IN TERMS OF METERS-YARDS PER HOUR. TRENCHTRONIC EQUIPPED, THIS MACHINE HAS BEEN SPECIALLY DEVELOPED TO BE EMPLOYED IN DIRT EXCAVATION; ITS COMPACT DIMENSIONS AND WEIGHT MAKE THE 775DT BW VERY EASY TO USE AND TRANSPORT. powered by 0250
5 Dirt Series 775DT Bucket Wheel Specification 34'-2" [1041cm] 32'-7" [993cm] 10'-2" [310cm] 9'-11" [302cm] 18 5'-10" [178cm] 2'-1" [63cm] 6'-6" [198cm] 11'-1.9" [340cm] 2'-7" Track [80cm] MIN 18" [46cm] MAX 30" [76cm] 8'-4" Tracks [255cm] 9'-8" [296cm] Standard Features Operating and Transport Weight Hydraulic Transmission Pressurized cab with air conditioning, heating, sound suppression and ROPS structure TrenchTronic 3.0 electronic machine control with: Operator selectable digging pressure and automatic operation Fully automatic operation Remote diagnostic system Electrical system: 24 V Self-leveling (tilting) undercarriage: Track tilt angle: 10 Automatic/manual operation Estimated weight...47,000-52,000 lbs...( kg) Ground pressure psi...( kg/cm2) Pressure and flow compensated (load sensing) Pump flow maximum...53 gpm (201 l/min) Pressure setting psi (180 bar) Oil tank capacity...77 gal (290 l) Trenching Dimensions Max depth (198 cm) Widths range (46-76 cm) Note: ask to Tesmec s Technical Department for the max width at max depth configuration Engine Model...CAT C6.6 TA Tier 3 Max horsepower...5 hp (168 kw) Max no load rpm rpm Fuel tank capacity gal (460 l) Fuel consumption gal/hr (46 l/hr) at full load Cooling rating adequate for 130 F (54.4 C) ambient air temperature Air cleaner: dry type 2 stages with pre-cleaner and automatic dust ejection Note: dependent on configuration and options Cross Conveyor Drive Hydrostatic: one pump and two motors Infinitely variable digging wheel speeds rpm Dirt cutters: spade-type teeth Fixed crumbshoe: with manual quick disconnect Wheel truck assemblies: Six assemblies, two upper and one lower with standard 10 (25.4 cm) diameter wheels Modular designed Truck-spindle and bearings are the same on all assemblies Headshaft assembly: Alloy steel shaft with keyway, hubs and tapered keys for multiple bucket setups Hardened, reversible split drive sprockets Crawler Drive Hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed range mph (0-3.3 km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Pressure and flow compensated pump with dual hydraulic drive motors Reversible and shiftable Belt speed infinitely variable fpm (0-250 m/min) Discharge direction: right or left Conveyor belt width (76 cm) Conveyor length (255 cm) Discharge height...3 (91.44 cm) at max digging depth (198 cm) Transport Dimensions Length (1.036 cm) Width (255 cm) Height over cab and (310 cm) with 3 bottom buckets removed Available Devices Work light package: 24 V, for night use Automatic laser control system for depth control (Trimble make) Tracks Overall track length (340 cm) Track pad type: single grouser, chamfered edges Track chain type: FL6 Track pad width (80 cm) Keep you updated on:
6 885 CS CHAINSAW TRENCHER SPECIALLY DESIGNED FOR FIBER-OPTIC PROJECTS IN URBAN AND SUBURBAN AREAS. THIS MODEL FEATURES OFFSET DIGGING CHAIN, TILTING TRACKS, ELEVATING CAB AND - AS MAIN OPTIONAL - AUTOMATIC CABLE LAYING SYSTEM, BACK- FILLING SYSTEM AND TRUCK LOADING CONVEYOR. THE 885 CAN ALSO BE EMPLOYED IN TRENCH EXCAVATION FOR SMALL UNDERGROUND UTILITIES SUCH AS ELECTRIC CABLES, WATER, GAS AND OTHER. TRENCHTRONIC 3.0 EQUIPPED. powered by 0300
7 885 Chainsaw Specification "B" 2'-2" [65cm] 8'-4" [253cm] 2'-2" [65cm] 9'-1" [276cm] 13'-1" [400cm] 23 "A" 4' ft MACHINE SHOWN 8'-4" [255cm] 1'-6" [46cm] 5'-1" [155cm] 1'-8" [51cm] 7'-4" [4cm] 8'-4" [253cm] 16 11'-10" [360cm] 9'-6" [290cm] 5-5 Boom A B 3 3 (91 cm) (883 cm) 4 4 (1 cm) (913 cm) Min 8" [20cm] Max 18" [46cm] 5'-7" [169cm] 1'-8" [50cm] 5 5 (152 cm) (943 cm) 7'-10" [240cm] Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) TrenchTronic 3.0 electronic machine control with: Operator selectable digging pressure and automatic operation Fully automatic operation Remote diagnostic system Positive locking digging chain adjustment Stabilizers with dirt drags: automatically adjust to terrain changes Vibration isolator mount: used on engine, radiator, oil cooler, exhaust silencer and operator station Electrical system: 24 V Trenching Dimensions SINGLE BOOM Max depth...5 (152 cm) Widths range (20-45 cm) Engine Model...CAT C6.6 ACERT Tier 3 Max horsepower hp (146 kw) Max no load rpm rpm Fuel tank capacity gal (400 l) Fuel consumption gal/hr (43 l/hr) at full load Cooling rating adequate for 1 F (50 C) ambient air temperature Air cleaner: dry type, 2 stages with dual pre-cleaner Operating and Transport Weight Weight...39,683-46,297 lbs...( kg) Ground pressure psi...( kg/cm 2 ) Drive Hydrostatic: one variable displacement pump and one motor Flywheel gearbox: shaved, helical gearing, case hardened for extreme shock load Infinitely variable digging chain speeds fpm (0-210 m/min) Tesmec designed single strand, 4.5 (11.4 cm) pitch chain, K or M style Digging teeth: (Rock) 1 (2.54 cm) diameter shank, rotary carbide insert (Dirt) single edge, hard surface cup cutters Crawler Drive Dual path, hydraulic drive, planetary transmissions with single lever steering, single lever direction Variable displacement pump and motor Infinitely variable speed: forward and reverse mph (0-3.6 km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Self-leveling (tilting) undercarriage: Track tilt angle: +5 /-5 Automatic/manual operation Overall track length (255 cm) Track pad type: triple grouser Track chain type: FL6 Track pad width (50 cm) Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...46 gpm (175 l/min) Pressure setting psi (172 bar) Oil tank capacity...80 gal (300 l) Cross Conveyor Pressure and flow compensated pump with dual hydraulic drive motors Belt speed infinitely variable fpm (0-350 m/min) Discharge direction: right or left Conveyor belt width (50 cm) Conveyor length (185 cm) Transport Dimensions Length with crumbshoe and truck loading conveyor...3 ft boom: (883 cm)...4 ft boom: (913 cm)...5 ft boom: (943 cm Width (253 cm) Height (290 cm) Available Devices Work light package: 24 V, for night use Automatic laser control system for depth control (Trimble make) Hydraulic crumbshoe Automatic laying systems for cable and PVC pipe Extended cross conveyor with hydraulic shift Fuel pump, quick fi ll Digging teeth*: (Rock) 1 1/2 diameter shank, rotary carbide insert (3.81 cm) (Dirt) Tesmec spade teeth Note: available with blocks that allow use of all industry standard 1-1/2 conical teeth, as well as spade teeth 0300
8 975 RS ROCKSAW VERSION OF THE 975 MODEL, THIS MODEL HAS BEEN CONCEIVED FOR THE TOUGHEST ROCK CONDITIONS. 325 HP ENGINE, 30 METRIC TON-CLASS, AND TRENCHTRONIC 3.0 CONTROL SYSTEM ARE SOME OF THE MAIN CHARACTERISTICS OF THIS MID-SIZE ROCK-CUTTER. powered by 0400
9 Rocksaw Specification 29'-4" [893cm] 28'-10" [878cm] 12'-7" [385cm] 1'-6" [46cm] 10'-4" [315cm] 10'-8" [325cm] 7'-3" [1cm] 975 9'-9" [298cm] 7'-9" [236cm] 2'-0" [61cm] Track 8'-4" [254cm] Min 6" [15cm] Max 12" [30cm] 4'-2" [127cm] Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) TrenchTronic 3.0 electronic machine control with: Operator selectable digging pressure and automatic operation Fully automatic operation Remote diagnostic system Electrical system: 24 V Anti vibration isolator mounts: used on engine, radiator/oil cooler unit and cab Stabilizers with trench cleaners: automatically adjust to terrain changes Positive locking digging chain adjustment Trenching Dimensions Depths (0-127 cm) Widths (15-30 cm) Note: ask to Tesmec s Technical Department for the max width at max depth confi guration Engine Model...CAT C9 ACERT Tier 3 Max horsepower hp (242 kw) Max no load rpm rpm Fuel tank capacity gal (730 l) Fuel consumption gal/hr (58.3 l/hr) at full load Cooling rating adequate for 1 F (50 C) ambient air temperature Air cleaner: dry type, 2 stages with pre-cleaner and automatic dust ejection Operating and Transport Weight Weight...63,000-68,000 lbs...( kg) Ground pressure lbs/sq Inch...( kg/cm 2 ) Drive Hydrostatic: one pump and two motors capable of transmitting full engine horsepower Flywheel gearboxes Infinitely variable digging chain speeds fpm (0-175 m/min) Cutters: rotary carbide tipped 1 ½ (3.8 cm) shank diameter Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed ranges: High range mph (0-4 km/hr) Low range mph (0-2.2 km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (298 cm) Track pad type: triple grouser Track chain type: Caterpillar D5 Track pad width...2 (61 cm) Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...43 gpm (164 l/min) Pressure setting psi (172 bar) Oil tank capacity...73 gal (275 l) Transport Dimensions Length (893 cm) Width (254 cm) Height...Boom frame 10 8 (325 cm)...over cab 10 4 (315 cm) Available Devices Work light package: 24 V, for night use Laser control system pre-wire Hydraulic crumbshoe Cab anti-vandalism window covers Polyurethane or rubber track pads combination digging tool holders Tilt tracks: Track tilt angle: 9º each direction (18º total) Automatic/Manual operation 0400
10 975 CS MID-SIZE CHAINSAW TRENCHER CONCEIVED FOR ROCK EXCAVATION FOR UTILITIES PROJECTS SUCH AS FIBER OPTIC, ELECTRIC CABLES, WATER CONDUITS, PIPELINES AND OTHER. THE 975 CAN BE EQUIPPED WITH ELEVATING CABIN AND TILTING TRACKS; UPON REQUEST IT CAN ALSO FIT AN AUTOMATIC LAYING SYSTEM FOR FIBER OPTIC BACK-BONE PROJECTS OR ELECTRIC CABLE NETWORKS. TRENCHTRONIC 3.0 EQUIPPED. powered by 0500
11 OIL DRAIN OIL DRAIN OIL LEVEL GEAR BOX MOD.41T-140-SAE SERIAL N FILL WITH : 85W/140W WARNING : FAILURE DUE TO LACK OF LUBRICATION VOIDS WARRANTY OIL LEVEL OIL LEVEL OIL LEVEL OIL DRAIN Chainsaw Specification 9'-7" [291cm] "B" 12'-9" [389cm] 12'-7" [385cm] 6'-0" [184cm] 6'-0" [184cm] OIL LEVEL OIL DRAIN '-1" [460cm] 10'-4" [315cm] 6'-10" [208cm] 5'-0" [153cm] 5'-0" [153cm] 1'-6" [46cm] 2'-0" [61cm] Track 8'-4" [254cm] Min 12" [30cm] Max 36" [91cm] "A" 9'-9" [298cm] 8' ft MACHINE SHOWN 8'-2" [249cm] 11'-10" [360cm] 10 Boom A B 4 4 (1 cm) 27-6 (839 cm) (183 cm) (909 cm) 8 8 (244 cm) 32-6 (990 cm) (305 cm) 34-9 (1.059 cm) Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) TrenchTronic 3.0 electronic machine control with: Operator selectable digging pressure and automatic operation Fully automatic operation Remote diagnostic system Electrical system: 24 V Anti vibration isolator mounts: used on engine, radiator/oil cooler unit and cab Stabilizers with trench cleaners: automatically adjust to terrain changes Positive locking digging chain adjustment Trenching Dimensions SINGLE BOOM Max depth...10 (305 cm) Widths range (30-45 cm) DOUBLE LINK BOOM Max depth...10 (305 cm) Widths range (45-71 cm) DOUBLE BOOM Max depth...8 (244 cm) Widths range (61-91 cm) Engine Model...CAT C9 ACERT Tier 3 Max horsepower hp (242 kw) Max no load rpm rpm Fuel tank capacity gal (730 l) Fuel consumption gal/hr (58.3 l/hr) at full load Cooling rating adequate for 1 F (50 C) ambient air temperature Air cleaner: dry type, 2 stages with pre-cleaner and automatic dust ejection Operating and Transport Weight Weight...55,116-72,752 lbs...( kg) Ground pressure lbs/sq Inch...( kg/cm 2 ) Drive Hydrostatic: one pump and two motors capable of transmitting full engine horsepower Flywheel gearboxes Infinitely variable digging chain speeds fpm (0-160 m/min) Tesmec designed single strand or double link 4.5 (11.4 cm) pitch chain, K style Standard cutters: rotary carbide tipped 1 ½ (3.8 cm) shank diameter Optional cutters: single edge, hard surfaced spade teeth for dirt - Tesmec dirt tool with 1 ½ (3.8 cm) shank diameter Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed ranges: High range mph (0-4 km/hr) Low range mph (0-2.2 km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (298 cm) Track pad type: triple grouser Track chain type: Caterpillar D5 Track pad width...2 (61 cm) Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...43 gpm (164 l/min) Pressure setting psi (172 bar) Oil tank capacity...73 gal (275 l) Cross Conveyor Pressure and flow compensated pump with dual hydraulic drive motors Reversible and shiftable Belt speed infinitely variable fpm (0-240 m/min) Discharge direction: right or left Conveyor belt width (60 cm) Conveyor length (250 cm) Discharge height (145 cm) Transport Dimensions Length with crumbshoe without truck loading conveyor...4 ft boom: 27 6 (839 cm)...6 ft boom: (909 cm)...8 ft boom: 32-6 (990 cm)...10 ft boom: 34 9 (1.059 cm) Width, no motor removal (261 cm) Width, with motor removal (254 cm) Height (315 cm) Available Devices Work light package: 24 V, for night use Laser control system pre-wire Hydraulic crumbshoe Cab anti-vandalism window covers Polyurethane or rubber track pads combination digging tool holders Available on special order Tilt tracks: Track tilt angle: 9º each direction (18º total) Automatic/Manual operation 0500
12 1075 BW THE 1075 BW MODEL HAS BEEN DESIGNED AS A HIGH-PRODUCTIVITY TRENCHER FOR PIPELINES AND UTILITIES PROJECTS IN DIRT AND LIGHT ROCKY SOILS. ITS BUCKETS CAN BE EQUIPPED WITH CONICAL OR SPADE TOOLS TO ENSURE THE MAXIMUM PRODUCTIVITY ACCORDING TO THE RELEVANT GROUND CONDITIONS. 0600
13 TRACK RECOIL ADJUSTER 1075 Bucket Wheel Specification 37'-8" [1148cm] 36'-10" [1123cm] 10'-2" [310cm] 17'-3" [525cm] '-9" [327cm] 13'-2" [400cm] 150 7'-0" [213cm] 1'-7" [49cm] 10'-9" [328cm] 9'-4" [284cm] 2'-8" Track [81cm] Min 20" [51cm] Max 40" [102cm] 9'-9" Tracks [298cm] 4'-2" [127cm] Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) Load control: operator selectable digging pressure, automatic operation Stabilizers with adjustable berm scrapers on Chainsaw model Electrical system: 12 V /24 V Trenching Dimensions Digging depth, dirt...standard 7 ft (213 cm) Digging depth, dirt...optional 8 ft (244 cm with the Tesmec Extended-Depth Buckets Digging depth, rock...7 ft (213 cm) Widths of cut: 7 ft-dirt...20 Min. (11 Bucket) to max. 40 (28 bucket) ( cm) Widths of cut: 8ft-Dirt...20 Min. (11 Bucket) to Max. 24 (16 Bucket) (51-61 cm) Widths of cut: 7ft-Rock...20 Min. (11 Bucket) to 26 (16 Bucket) (51-66 cm) Engine Model...CAT C9 ACERT Tier 3 Max horsepower hp (242 kw) Max no load rpm rpm Fuel tank capacity gal (818 l) Fuel consumption gal/hr (64 l/hr) at full load Cooling rating adequate for 125 F (51.7 C) ambient air temperature Air cleaner: dry type, centrifugal precleaner with primary and secondary fi lters Operating and Transport Weight Weight Dirt...83,000-92,000 lbs...( kg) Weight Rock...87,000-92,000 lbs...( kg) Drive Hydrostatic: two pumps and two motors capable of transmitting full engine horsepower Digging wheel speed rpm Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse High range mph (0-4.0 km/hr) Low range mph (0-2.1 km/hr) Integral parking brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (328 cm) Track pad type: single, double, or triple grouser Track chain type: Caterpillar D5 Track pad width (81 cm) Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...45 gpm (170 l/min) Pressure setting psi (172 bar) Oil tank capacity gallons (408.7 l) Conveyor Pressure and flow compensated pump with dual hydraulic drive motors Reversible and shiftable Belt speed infinitely variable fpm ( m/min) Discharge direction: right or left Conveyor belt width (91.4 cm) Conveyor length...13 (396 cm) Discharge height (104 cm) Transport Dimensions Length (1.127 cm) Width without digging motors (296 cm) Width with digging motors (310 cm) Height with cab (327 cm) Height with cab elevated (400 cm) Height with crumbshoe (320 cm) (over Cab with single grouser pads) (3-bottom buckets and 2-top buckets removed on dirt set-up & 3 and 3 on rock set-up ) Height with roll-up crumbshoe (348 cm (over cylinder with single grouser pads) with respective (dirt/rock) buckets removed Available Devices Sight rod kit (2 types) Sloper kit (for use with customer supplied cable and ends) Hydraulic winch for conveyor fold 0600
14 1150 RS ROCKSAW TRENCHER FOR LONG-DISTANCE FIBER OPTIC NETWORKS, ELECTRIC CABLE PROJECTS AND SMALL DIAMETER PIPELINES; THE 1150 IS A HIGH PERFORMANCE ROCK- CUTTER FEATURING A SAW CUTTING UP TO 54 (137 CM) DEEP AND 14 (36 CM) WIDE. TRENCHTRONIC 3.0 EQUIPPED. powered by 0800
15 T Rocksaw Specification 35'-8" [1088cm] 34'-9" [1059cm] '-6" [137cm] 180 2'-2" [65cm] 12'-0" [366cm] 8'-5" [257cm] 7'-5" [5cm] 10'-10" [329cm] 12'-11" [393cm] 12'-5" [379cm] 10'-5" [317cm] Min 6" [15cm] Max 14" [36cm] 1'-10"Tracks [56cm] 8'-4"Tracks [255cm] Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) TrenchTronic 3.0 electronic machine control with: Operator selectable digging pressure and automatic operation Fully automatic operation Remote diagnostic system Electrical system: 24 V Stabilizers with adjustable drags Tool box with locking door Engine doors with security locks Gearboxes, fuel and hydraulic tanks: pressurized with 5 psi (0.3 bar) filtered breathers Flywheel gearboxes: shaved, helical gearing, case hardened for extreme shock load Vibration isolator mounts: used on engine, radiator, oil cooler, exhaust silencer and cab Trenching Dimensions Depths (0-137 cm) Widths (15-36 cm) Engine Model...CAT C13 ACERT Tier 3 Max horsepower hp (328 kw) Max no load rpm rpm Fuel tank capacity gal (1.060 l) Fuel consumption... gal/hr (83 l/hr) at full load Cooling rating adequate for 130 F (54.4 C) ambient air temperature Air cleaner: dry type, 2 stage with dual precleaner Operating and Transport Weight Weight...99,208 lbs ( Kg) Drive Hydrostatic: two pumps and two motors capable of transmitting full engine horsepower Infinitely variable digging chain speeds...standard ratio fpm (0 244 m/min) Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse High range mph (4.43 km/hr) Low range mph (2.0 km/hr) Integral parking and emergency brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (379 cm) Track pad type: triple grouser Track chain type: Caterpillar 42/325 or equivalent Track pad width (56 cm) Hydraulic Transmission Pressure and flow compensated (Load sensing) Auxiliary pump flow maximum...40 gpm (151 l/min) Auxiliary pressure setting psi (172 bar) Oil tank capacity gal (378.5 l) Transport Dimensions Length w/digging attachment & counterweight (1.059 cm) Width (255 cm) with 1 10 (56 cm) track pads Height with cab (329 cm) Height with cab & w/digging attachment...12 (366 cm) Available Devices Work light package: 24 V, for night use Laser control system pre-wire Optional rocksaw cover 0800
16 1150XHD CS 50 METRIC TON-CLASS, TRENCHTRONIC 3.0 EQUIPPED ROCK TRENCHER FOR MID-SIZE PIPELINES; THE 1150XHD IS THE BEST-SELLING TRENCHER. THIS MODEL IS EQUIPPED WITH A 440 HP ENGINE AND CAN DIG UP TO 12 (366 CM) DEEP AND UP TO 42 (107 CM) WIDE, MAKING IT THE IDEAL TRENCHER FOR MID-SIZE PIPELINES AND UNDERGROUND UTILITIES. powered by 0900
17 XHD Chainsaw Specification 12'-5" [378cm] "B" 9'-6" [290cm] '-1" [338cm] 13'-1" [399cm] 15'-0" [457cm] "A" 1'-11" [57cm] 4'-9" [145cm] 12'-5" [379cm] 10'-7" [3cm] 10'-6" [320cm] 2'-0" Track [60cm] Boom A B 6' ft MACHINE SHOWN 6 6 (183 cm) 36-5 (1112 cm) 8 8 (244 cm) 38-5 (1172 cm) Min 18" [45cm] Max 42" [107cm] (305 cm) 40-9 (1242 cm) (366 cm) 42-9 (1304 cm) Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) TrenchTronic 3.0 electronic machine control with: Operator selectable digging pressure and automatic operation Fully automatic operation Remote diagnostic system Electrical system: 24 V Stabilizers with adjustable drags Gearboxes, fuel and hydraulic tanks: pressurized with 5 psi (0.3 bar) filtered breathers Vibration isolator mounts: used on engine, radiator, oil cooler, exhaust silencer and cab Trenching Dimensions SINGLE CHAIN BOOM Max depth...8 (244 cm) Widths range (45-51 cm) DOUBLE CHAIN NARROW BOOM Max depth...12 (366 cm) Widths range (71-91 cm) DOUBLE CHAIN WIDE BOOM Max depth...10 (305 cm) Widths range ( cm) Engine Model...CAT C13 ACERT Tier 3 Max horsepower hp (328 kw) Max no load rpm rpm Fuel tank capacity gal (1.230 l) Fuel consumption...23 gal/hr (87 l/hr) at full load Cooling rating adequate for 1 F (50 C) ambient air temperature Air cleaner: dry type, 2 stages with pre-cleaner and automatic dust ejection Operating and Transport Weight Weight...110, ,278 lbs...( kg) Ground pressure lbs/sq Inch...( kg/cm 2 ) Drive Hydrostatic: two pumps and two motors capable of transmitting full engine horsepower Flywheel gearboxes: shaved, helical gearing, case hardened for extreme shock load Infinitely variable digging chain speeds fpm (0-168 m/min) Tesmec designed 6.5 pitch digging chain for single chain configuration or 4.5 pitch digging chain for double chain configuration Cutters: rotary carbide tipped 1 ½ (3.81 cm) shank diameter Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed ranges: High range mph ( km/hr) Low range mph ( km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (379 cm) Track pad type: triple grouser Track chain type: Caterpillar 42/325 or equivalent Track pad width...2 (60 cm) 8'-11" Track [271cm] Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum gpm (240 l/min) Pressure setting psi (172 bar) Oil tank capacity gal (378.5 l) Cross Conveyor Pressure and flow compensated pump with dual hydraulic drive motors Reversible and shiftable Belt speed infinitely variable fpm (0-9 m/min) Discharge direction: right or left Conveyor belt width (76 cm) Conveyor length (416 cm) Discharge height ( cm) Transport Dimensions Length with crumbshoe with crumbshoe and counterweight...6 ft boom: 36 5 (1.112 cm)...8 ft boom: 38 5 (1.172 cm)...10 ft boom: 40 9 (1.242 cm)...12 ft boom: 42 9 (1.304 cm) Width* (290 cm) Height with cabin (338 cm) * width could be reduced to 110 (280 cm) removing digging motors Available Devices Work light package: 24 V, for night use Laser control system Hydraulic crumbshoe Cab anti-vandalism window covers combination digging tool holders 0900
18 1175XHD BW 60 METRIC TON-CLASS BUCKET WHEEL TRENCHER FOR MID TO BIG SIZE PIPELINES AND UTILITIES EXCAVATION IN DIRT AND LIGHT ROCKY SOILS; THE 1175XHD MODEL IS AS A HIGH-PRODUCTIVITY MACHINE THAT CAN BE EQUIPPED WITH CONICAL OR SPADE TOOLS TO ENSURE THE MAXIMUM PRODUCTIVITY ACCORDING TO THE DIFFERENT GROUND CONDITIONS. 1100
19 TRACK RECOIL ADJUSTER FLOAT FLOAT 1175XHD Bucket Wheel Specification 44'-5" [1354cm] 43'-3" [1318cm] 11'-3" [343cm] 1'-9" [53cm] 14'-1" [429cm] 11'-6" [351cm] 13'-11" [424cm] 4'-11" [150cm] 14 9'-0" [274cm] 12'-2" [371cm] 11'-3" [343cm] Min 30" [76cm] Max 54" [137cm] 2'-6" Track [76cm] Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) External support structure for elevating cab, wearpad design with adjustment Load control: operator selectable digging pressure, automatic operation Battery box and toolbox with locking door Engine doors with security locks Fuel and hydraulic tank: aircraft quality locking caps Flywheel gearboxes and hydraulic tanks: pressurized with 5 psi (0.3 bar) filtered breathers Vibration isolator mount: used on engine, radiator, oil cooler, and exhaust silencer Stabilizers / dirt drags: automatically adjust to terrain changes. Lights: 24 V forward facing Electrical system: 12 /24 V Trenching Dimensions Depths...3 ft min (91 cm with boom level)...max 9 ft (274 cm) Widths of cut, Dirt...30 (76 cm) to 54 (137 cm) Widths of cut, Rock...30 (76 cm) Engine Model...CAT C13 ACERT Tier 3 Max horsepower hp (328 kw) Max no load rpm rpm Fuel tank capacity gal (1.124 l) Fuel consumption...7 gal/hr (86 l/hr) at full load Cooling rating adequate for 1 F (50 C) ambient air temperature Air cleaner: dry type, centrifugal precleaner with primary and secondary fi lters Operating and Transport Weight Weight Dirt...135, ,000 lbs ( kg) Weight Rock...142,000 lbs ( kg) Drive Hydrostatic: four pumps and two motors capable of transmitting full engine horsepower Three operator selectable wheel speeds: rpm, rpm, rpm Center pull articulated wheel Heavy-duty trapezoid design boom Heavy-duty hydraulic lift and tilt cylinders Fixed crumbshoe Hardened alloy steel shaft with multiple flanges for easy digging-width changes Hardened reversible split drive sprockets Four truck assemblies, two upper and two lower with standard 14 (35.6 cm) ride diameter wheels Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed ranges: High range mph ( km/hr) Low range mph ( km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (371 cm) Track pad type: single, double or triple grouser Track chain type: Caterpillar D7 Track pad width (76.2 cm) Optional track pad width...2 (61 cm) 10'-4" Tracks [315cm] 18'-10" [573cm] 7'-11" [241cm] Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...45 gpm (170 l/min) Pressure setting psi (172 bar) Oil tank capacity gal (670 l) Cross Conveyor Pressure and flow compensated pump with dual hydraulic drive motors Reversible and shiftable Belt speed infinitely variable fpm (0-9 m/min) Discharge direction: right or left Conveyor belt width (107 cm) Discharge height: variable Manual conveyor fold Transport Dimensions Length (1.354 cm) Width (315 cm) with digging motors removed, 30 (76 cm) D7 track pads Height (429 cm) over wheel with (3) buckets removed from bottom and (2) from the top Available Devices Work light package: 24 V, for night use Laser control system pre-wire Hydraulic crumbshoe Cab anti-vandalism window covers Air compressor Twin hose reel package: connections to power hydraulic tools 1100
20 1275L RS 60 METRIC TON CLASS TRENCHER FOR HIGH-PRODUCTIVITY, LONG-DISTANCE EXCAVATION WORKS IN THE TOUGHEST ROCK CONDITIONS; THE 1275L MODEL IS THE BIGGEST ROCKSAW TRENCHER MACHINE IN THE FAMILY, SUITABLE FOR FIBER OPTICS BACK-BONE PROJECTS, ELECTRIC-CABLE NETWORKS, UTILITIES AND SMALL SIZE PIPELINES. A MASTER ROCK-CUTTER. 1200
21 ADJUSTER RECOIL TRACK ADJUSTER RECOIL TRACK 1275L Rocksaw Specification 38'-11" [1187cm] 11'-2" [340cm] 11'-8" [356cm] 10'-1" [307cm] 130 2'-0" [60cm] 5'-0" [152cm] 10'-10" [329cm] 12'-2" [371cm] WHEEL IN DIGGING POSITION 36'-6" [1113cm] Min 8" [20cm] Max 16" [40cm] 2'-6" Track [76cm] 11'-0" [335cm] WHEEL BOLTS REMOVED 12'-2" [370cm] WHEEL IN FOLDED POSITION Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) Load control: operator selectable digging pressure, automatic operation Toolbox with locking doors Engine doors with security locks Fuel and hydraulic tank: aircraft quality locking caps Gearboxes and hydraulic tanks: pressurized with 5 psi (0.3 bar) filtered breathers Vibration isolator mount: used on engine, radiator, oil cooler, exhaust silencer External support structure for elevating cab, wearpad design with adjustment Electrical system: 24 V starting,12 V controls Trenching Dimensions Depths (0-152 cm) Widths...8 (20 cm) to 16 (41 cm) in ½ inch (1.3 cm) increments Engine Model...CAT C15 ACERT Tier 3 Max horsepower hp (403 kw) Max no load rpm rpm Fuel tank capacity gal (1.423 l) Fuel consumption gal/hr (109.4 l/hr) at full load Cooling rating adequate for 1 F (50 C) ambient air temperature Air cleaner: dry type, centrifugal precleaner with primary and secondary fi lters Operating and Transport Weight Weight...150,000 lbs...( kg) Drive Hydrostatic: four pumps and two motors Flywheel gearboxes: shaved, helical gearing, case hardened for extreme shock load Three operator selectable digging speed ranges with 5 (152 cm) depth wheel: fpm (0-136 m/min) fpm (0-197 m/min) fpm (0-258 m/min) Cutters: rotary carbide tipped 1 ½ (3.81 cm) shank diameter Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed ranges: High range mph (0-4.1 km/hr) Low range mph (0-2.3 km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (371 cm) Track pad type: double or triple grouser Track chain type: Caterpillar D7 Track pad width (76.2 cm) Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...45 gpm (170 l/min) Pressure setting psi (172 bar) Oil tank capacity gal (768 l) Transport Dimensions Length (1.113 cm with stabilizer removed Width (340 cm) with digging motors removed, 30 (76 cm) D7 track pads Height..., (371 cm) over wheel with wheel folded Available Devices Work light package: 24 V, for night use Laser control system Cab anti-vandalism window covers Twin hose reel package: connections to power hydraulic tools 1200
22 1375 BW 70 METRIC TON-CLASS BUCKET WHEEL TRENCHER CONCEIVED AS A HIGH-PRODUCTIVITY MACHINE FOR BIG DIAMETER PIPELINES AND UTILITIES PROJECTS IN DIRT AND LIGHT ROCKY SOILS, THIS MODEL CAN DIG UP TO 9 6 (291 CM) DEEP AND 66 (168 CM) WIDE. ITS BUCKETS CAN BE EQUIPPED WITH CONICAL OR SPADE TOOLS TO ENSURE THE MAXIMUM PRODUCTIVITY ACCORDING TO THE DIFFERENT GROUND CONDITIONS. 1300
23 ISO 6682 TRACK RECOIL ADJUSTER 1375 Bucket Wheel Specification 46'-6" [1417cm] 45'-3" [1379cm] 9'-6" [291cm] 1'-10" [56cm] 14'-9" [450cm] 11'-5" [348cm] '-8" (W/Extended Track) [417cm] 20'-11" [636cm] 13'-0" [397cm] 12'-3" [372cm] Min 36" [91cm] Max 66" [168cm] 2'-10" Tracks [86cm] 14'-0" Tracks(Extended) [427cm] 6'-5" [195cm] Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) Load control: operator selectable digging pressure, automatic operation Toolbox with locking doors Engine doors with security locks Fuel and hydraulic tank: aircraft quality locking caps Gearboxes and hydraulic tanks: pressurized with 5 psi (0.3 bar) filtered breathers Flywheel gearboxes: shaved, helical gearing, case hardened for extreme shock load Vibration isolator mounts: used on engine, radiator, oil cooler External support structure for elevating cab, wearpad design with adjustment Center pull articulated wheel Radial arm articulation Heavy-duty trapezoid design boom Heavy-duty hydraulic lift and tilt cylinders Fixed crumbshoe Extendable undercarriage Electrical system: 24 V starting, 12 V controls Trenching Dimensions Depths minimum 3 ft (91 cm) with boom level...maximum 9 6 (291 cm) Widths of cut...from 36 (91 cm) to 66 (168 cm) Engine Model...CAT C15 ACERT Tier 3 Max horsepower hp (403 kw) Max no load rpm rpm Fuel tank capacity gal (1.423 l) Fuel consumption gal/hr (109.4 l/hr) at full load Cooling rating adequate for 1 F (50 C) ambient air temperature Air cleaner: dry type, centrifugal pre-cleaner with primary and secondary fi lters Operating and Transport Weight Weight...160, ,000 lbs ( kg) Drive Hydrostatic: four pumps and two motors Three operator selectable digging speed ranges: rpm (351 ft/min) (107 m/min) rpm (500 ft/min) (152 m/min) rpm (600 ft/min) (183 m/min) Digging rims: 1 ½ Plate (3.81 cm) with forged steel ments multiple drilled for (15) or (18) bucket set-up Available cutters: rotary carbide tipped 1 ½ diameter (3.81 cm) shank, H&L dirt teeth and pockets, combo pockets for dirt & conical tools, ESCO type teeth and adaptors Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed ranges: High range mph (0-3.3 km/hr) Low range mph ( km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (372 cm) Track pad type: single grouser Track chain type: Caterpillar D7 Track pad width (86 cm) Headshaft Assembly Hardened alloy steel shaft with multiple flanges for easy digging-width changes Hardened reversible split drive sprockets Wheel Truck Assemblies Four assemblies, two upper and two lower with standard 14 (35.6 cm) ride diameter wheels Factory set heavy-duty tapered roller bearings Heavy-duty mechanical seals with replaceable elements Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...45 gpm (170 l/min) Pressure setting psi (172 bar) Oil tank capacity gal (768 l) Cross Conveyor Hydrostatic: one pump and two motors Reversible and shiftable Belt speed infinitely variable fpm (0-305 m/min) Discharge direction: right or left Conveyor belt width...4 (1 cm) Discharge height: variable Manual conveyor fold Transport Dimensions Length (1.379 cm) Width (366 cm) with digging motors removed, 2 10 (86 cm) D7 track pads Height (437 cm) (over wheel with lower and upper buckets removed, and single grouser pads) Width with extended tracks...14 (427 cm) Height (417 cm) over wheel with (3) buckets removed from bottom and (2) from the top Available Devices Work light package: 24 V, for night use Laser control system Cab anti-vandalism window covers Twin hose reel package: connections to power hydraulic tools Straight conveyor with winch fold 1300
24 1575 BW S LARGEST BUCKET WHEEL IS CONCEIVED AS A HIGH-PRODUCTIVITY MACHINE FOR BIG DIAMETER PIPELINES AND UTILITIES PROJECTS IN DIRT AND LIGHT ROCKY SOILS. ITS BUCKETS CAN BE EQUIPPED WITH CONICAL OR SPADE TOOLS TO ENSURE THE MAXIMUM PRODUCTIVITY ACCORDING TO THE DIFFERENT GROUND CONDITIONS. NO OTHER TRENCHER MACHINE CAN GRANT SUCH PRODUCTIVITY IN TERMS OF LINEAR METERS PER HOUR (FOOT PER MINUTE). 1600
25 CAT # LC 36 CAT # CAT 350 CAT CAT 350 CAT # CAT # CAT ADJUSTER RECOIL TRACK TOO boom Bucket Wheel Specification 51'-11" [1582cm] 2'-5" [73cm] 2'-2" [66cm] 14'-6" [443cm] 12'-1" [367cm] 11'-9" [358cm] 15'-8" [478cm] 8'-0" [244cm] 3'-0" Track [91cm] 7'-0" [213cm] Max 6'-0" [183cm] 14'-0" Tracks [427cm] Standard Features Pressurized cab with air conditioning, heating, sound suppression Elevating cab module with roll over protection (ROPS) Load control: operator selectable digging pressure, automatic operation Battery box and toolbox with locking door Engine doors with security locks Gearboxes and hydraulic tanks: pressurized with 5 psi (0.3 bar) filtered breathers Flywheel gearboxes: shaved, helical gearing, case hardened for extreme shock load Vibration isolator mount: used on engine, radiator, oil cooler, exhaust silencer, and cab Center pull articulated wheel Radial arm articulation with quick disconnect mast Heavy-duty design boom Heavy-duty hydraulic lift and tilt cylinders Extending undercarriage Fixed crumbshoe Electrical system: 24 V starting, 12 V controls Trenching Dimensions Depths 3 8 through 10 (112 cm through 304 cm) Width 34 (86 cm) buckets ( cm Cut 15 or 18 buckets Width 46 (117 cm) buckets ( cm Cut 15 or 18 buckets Width 64 (163 cm) Buckets 72 (183 cm) Cut 15 or 18 buckets Engine Model...CAT C18 ACERT Tier 3 Max horsepower hp (470 kw) Max no load rpm rpm Fuel tank capacity gal (1.893 l) Fuel consumption gal/hr (131 l/hr) at full load Cooling rating adequate for 130 F (54.4 C) ambient air temperature Air cleaner: dry type, centrifugal pre-cleaner with primary and secondary fi lters Operating and Transport Weight Weight...210, ,000 lbs ( kg) Drive Hydrostatic: four pumps and two motors capable of transmitting full engine horsepower Three operator selectable digging speed ranges:...1 st : fpm (0-105 m/min) (6 rpm)...2 nd : fpm (0-158 m/min) (9 rpm)...3 rd : fpm (0-193 m/min) (11 rpm) Cutters: spade type teeth, rotary carbide tipped 1 ½ (3.8 cm) shank diameter teeth, or ESCO teeth Digging rims: double mented, 2 (5.1 cm) plate main rims with multiple drilled false rims to accept 15, or 18 buckets Buckets style: semi-round style Crawler Drive Dual path, hydrostatic drive, planetary transmissions capable of full counter rotation with single lever steering, single lever direction Infinitely variable speed: forward and reverse Speed ranges: High range mph ( km/hr) Low range mph ( km/hr) Integral parking and service brake: spring applied, hydraulic release, wet disc brake Tracks Overall track length (478 cm) Track pad type: single, double or triple grouser Track chain type: Caterpillar 62/350 Track pad width...3 (91cm) Headshaft Assembly Hardened alloy steel shaft with multiple flanges for easy rim width changes Hardened reversible split drive sprockets Wheel Truck Assemblies Modular spindle type assemblies for two lower trucks, using heavy duty tapered roller bearings Heavy-duty mechanical seals 2 upper truck assemblies (1) front and (1) rear with 6 (15.2 cm) diameter high alloy steel shafts with extra heavy-duty bearings and self centering spacers Hydraulic Transmission Pressure and flow compensated (load sensing) Pump flow maximum...45 gpm (170 l/min) Pressure setting psi (172 bar) Oil tank capacity gal (723 l) Cross Conveyor Hydrostatic: one pump and two motors w/gear reducer Reversible and shiftable Belt speed infinitely variable fpm (0-305 m/min) Discharge direction: right or left Conveyor belt width...4 (1 cm) Conveyor length (610 cm) Discharge height...6 (183 cm) Hydraulic winch lift and fold Transport Dimensions Length, tractor (8.43 cm) with no front counter weight Length, backend (868 cm) Width (366 cm) with 36 (91 cm) track pads (w/ motors removed) Height (437 cm) (over wheel with lower and upper buckets removed, and single grouser pads) Height, tractor with cab (367 cm) Height, tractor with cab elevated (443 cm) Available Devices Work light package: 24 V, for night use Laser control system Cab anti-vandalism window covers Stabilizers or adjustable bern-scrapers Twin hose reel package: connections to power hydraulic tools 1600
Trenchers for Underground water and sewage network installation
Main Technical Specifications s for Underground water and sewage network installation MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW DIG DEPTH / DIG WIDTH CHAINSAW DIG DEPTH / DIG WIDTH BUCKET WHEEL DIG
More informationTrenchers for Drainage works
Main Technical Specifications s for Drainage works MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW CHAINSAW BUCKET WHEEL ROCK HAWG 775DT 5 hp (168 kw) Caterpillar C6.6 ACERT 34,171-55,000 lbs (15.500-24.947
More informationTrenchers for Access network installation
Main Technical Specifications s for Access network installation MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW CHAINSAW BUCKET WHEEL ROCK HAWG 300 100 hp (74.5 kw) Perkins 1104D-44T 19,842-22,046 lbs (9.000-10.000
More informationRock Hawg for Soil Reclamation
Main Technical Specifications Rock Hawg for Soil Reclamation MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW CHAINSAW BUCKET WHEEL ROCK HAWG 1150XHD 440 hp (328 kw) Caterpillar C13 ACERT 110,231-132,278
More informationTESMEC CATALOGUE HARDCORE SOLUTIONS FOR THE TOUGHEST CONDITIONS
ABOUT TESMEC For over 50 years, customers have trusted TESMEC to provide them with the world s most reliable trenching machines. Our service and support gives customers the confidence to achieve their
More informationTRS East FM 917 Alvarado, Texas toll-free fax
TRS-1150 12520 East FM 917 Alvarado, Texas 76009 817.473.2233 toll-free 800.851.5102 fax 817.473.9742 www.tesmec.com 24050 Grassobbio (BG) Italy via Zanica 17/O tel +39 035 423.2911 fax +39 035 335.664
More informationDITCH WITCH RT55, RT40, RT36 RT TRACTORS
DITCH WITCH RT55, RT40, RT36 RT TRACTORS MAKING SHOVELS OBSOLETE SINCE 1949. DITCH WITCH. DITCH WITCH RT55 TRACTOR Our rugged line of RT tractors gives you the punch you need to dig through some of the
More informationT1255III TERRAIN LEVELER
T H E V E R M E E R D E A L E R N E T W O R K : R E L I A B L E S U P P O R T, A L L O V E R T H E W O R L D. Vermeer Asia Pacific Singapore 608586 Phone: +65 6516 9560 Fax: +65 6515 9218 Vermeer Corporation
More informationRT45 TRACTOR RIDE-ON
RT45 TRACTOR RIDE-ON RT45 TRACTOR 1 User-friendly operation, with color-coded speed/ direction and attachment controls easily accessible by operator; backfill blade controlled by a highly responsive joystick.
More informationT1255 TERRAIN LEVELER
T H E V E R M E E R D E A L E R N E T W O R K : R E L I A B L E S U P P O R T, A L L O V E R T H E W O R L D. Vermeer Asia Pacific Singapore 608586 Phone: +65 6516 9560 Fax: +65 6515 9218 Vermeer Corporation
More informationT1255 TERRAIN LEVELER SEM T1255 TERRAIN LEVELER
T1255 TERRAIN LEVELER SEM T1255 TERRAIN LEVELER S U R F A C E E X C A V A T I O N M A C H I N E CUTTING EDGE 2 v e r m e e r. c o m TECHNOLOGY: Vermeer trenchers are the benchmark when it comes to cutting
More informationTechnical description LR 622 Crawler loader
Technical description LR 622 Crawler loader Engine output 97 kw/132 HP Operating weight 15.4 17.0 t /34,000 37,500 lb Bucket capacity 1.54 1.80 m 3 /2.01 2.35 cu.yd. Hydrostatic travel drive with electronic
More informationTD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R.
CRAWLER DOZERS EPA Tier 3/EU Stage IIIA STANDARD, LGP ENGINE Make and model Emissions standard Displacement Bore and stroke Gross horsepower, SAE J1995 Cummins QSB3.3 EPA Tier 3/EU Stage IIIA 3.3 l (199
More informationCummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive
330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier
More informationRT125 QUAD TRACTOR RIDE-ON
RT125 QUAD TRACTOR RIDE-ON RT125 QUAD TRACTOR 2 Rubber isolators between the cab and frame reduce vibration to give the operator a smoother ride. 3 Six-post Rollover Protection System (ROPS) with a canopy.
More informationD11T/D11T CD. Track-Type Tractor
D11T/D11T CD Track-Type Tractor Engine Tier 2 Equivalent Weights Engine Model Cat C32 ACERT Operating Weight 104 257 kg 229,848 lb Net Power SAE J1349/ISO 9249 634 kw 850 hp Shipping Weight 37 485 kg 82,640
More information750M. (2) 12-volt, low-maintenance 925 cold-cranking -4 F (-20 C) OPERATOR ENVIRONMENT
750M LT/WT/LGP CRAWLER DOZER TIER 4 INTERIM CERTIFIED ENGINE Model FPT F5HFL413J Tier 4 Interim Certified Cylinders 4 Displacement 207.5 in 3 (3.4 L) Fuel injection Common rail Fuel #2 Diesel Fuel filter
More information939C Hystat Track-Type Loader
Engine Four-stroke cycle, in-line six cylinder Cat 3046 turbocharged diesel engine. Ratings at 2400 RPM* kw HP Gross power 74.6 100 Net power 67.9 90 The following ratings apply at 2400 RPM when tested
More informationD7G. Track-Type Tractor
D7G Track-Type Tractor Cat 3306 turbocharged engine Net power 149 kw 200 hp Operating weight With 7S blade 20 094 kg 44,300 lb With 7A blade 19 660 kg 43,300 lb Blade capacity 7S blade 4.2 m 3 5.5 yd 3
More informationTrenchers T1060 T1360 T1460 T1660 T1760 T1360. attachment
Trenchers T1060 T1360 T1460 T1660 T1360 attachment MVX\[_CX[ IDC V \[C_ DV_X\VDE T1060 T1360 T1460 T1660 Maximum Chain Pull Chain Speed Range 63,405 lbs. (28,760 kg) 159-748 fpm (48-228 m/min) 62,952 lbs.
More information550K/650K/700K CRAWLER DOZERS kw ( hp)
550K/650K/700K CRAWLER DOZERS 69 97 kw (92 130 hp) We hear you loud and clear. When customers sound off, we listen. So when our Customer Advocate Group (CAG) participants asked us to turn down the noise
More informationRT105M TRACTOR RIDE-ON
RT105M TRACTOR RIDE-ON RT105M TRACTOR 3 Six-post Rollover Protection System (ROPS) with a canopy. 5 Removable side panels for easy access to service areas. The RT105M is the ultimate machine if you re
More informationSpecif ications R125LCR-9A
Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power
More informationPRELIMINARY. 45 ton (40.8 mt) Telescopic Crawler Crane STANDARD FEATURES:
PRELIMINARY 45 ton (40.8 mt) Telescopic Crawler Crane STANDARD FEATURES: 33 ft to 105 ft (10.06 m to 32.00 m) full power main boom 197 hp Tier 3 Isuzu 4HK-T3 Main drum available line pull - 19,108 lbs
More informationDITCH WITCH RT115, HT115, RT95, RT75 RT/HT TRACTORS
DITCH WITCH RT115, HT115, RT95, RT75 RT/HT TRACTORS FEEL THE EARTH MOVE. DITCH WITCH. DITCH WITCH RT115, HT115 HEAVY-DUTY TRACTORS Both of these popular models are turbocharged with 115-horsepower (85.8
More information555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
More informationDX420LC TECHNICAL DATA
DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw
More informationHYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0
GROSS HORSEPOWER 110 KW 147 HP NET HORSEPOWER 103 KW 138 HP OPERATING WEIGHT 23,350 kg MAX HORIZONTAL REACH 15,240 mm Super Long Front PC 210 HYDRAULIC EXCAVATOR H Y D R A U L I C E X C A V A T O R WALK
More informationD6K. Track-Type Tractor. Engine Engine Model. Cat C6.6 ACERT. Weights
D6K Track-Type Tractor Engine Engine Model Flywheel Power Weights Operating Weight XL Operating Weight LGP Cat C6.6 ACERT 93.2 kw 125 hp 12 886 kg 13 467 kg 28,409 lb 29,690 lb Engine Engine Model Cat
More informationCONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
More informationTechnical Specifications
140 Motor Grader Technical Specifications Engine Engine Model Cat C9.3 Net Power ISO 9249/SAE J1349 186 kw 250 hp Net Power EEC 80/1269 186 kw 250 hp Net Power All-Wheel Drive (AWD) 201 kw 270 hp VHP Plus
More informationTD-9S COOLING ENGINE OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 4F/EU Stage IIIB STANDARD, LT, LGP TD-9S TD-9S.
CRAWLER DOZERS EPA Tier 4F/EU Stage IIIB STANDARD, LT, LGP ENGINE Make and model Emissions standard Displacement Cummins QSF3.8 EPA Tier 4F/EU Stage IIIB 3.8 l (229 in3) COOLING Type Variable-speed fan
More informationD58E-1 D58P-1. HORSEPOWER 130 HP 97 kw. BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 CRAWLER D58-1 DOZER D58-1
D58E-1 D58P-1 HORSEPOWER 130 HP 97 kw BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 D58-1 CRAWLER D58-1 DOZER D58E-1, D58P-1 CRAWLER DOZER Flywheel Horsepower: 130 HP 97 kw @ 1900 RPM Operating Weight: D58E-1:
More information850M. (2) 12-volt, low-maintenance 925 cold-cranking -4 F (-20 C) OPERATOR ENVIRONMENT
850M LT/WT/LGP CRAWLER DOZER TIER 4 INTERIM CERTIFIED ENGINE Model FPT F4HFE413P Tier 4 Interim Certified Cylinders 4 Displacement 275 in 3 (4.5 L) Fuel injection Common rail Fuel #2 Diesel Fuel filter
More informationStandards. Engine. Hydraulic System. Weights. Service Refill Capacities. Drive. Swing Mechanism. Sound Performance. Track
Engine Engine Model Cat T Diesel Engine Flywheel Power kw hp ISO kw hp SAE J kw hp EEC / kw hp Bore mm. in Stroke mm. in Displacement. L in Gross Power kw hp The C/C L meets US Tier and EU Stage II emissions
More informationDX140LC TECHNICAL DATA
DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS
More informationDitch Witch 420sx, 410sx, 100sx, Zahn R300, Zahn R230 VIBRATORY PLOWS. ditchwitch.com
Ditch Witch 420sx, 410sx, 100sx, Zahn R300, Zahn R230 VIBRATORY PLOWS ditchwitch.com CMWC-1441_REV_VibPlows_V7.indd 1 feel the earth move. ditchwitch.com CMWC-1441_REV_VibPlows_V7.indd 2-3 ditch witch
More informationZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)
ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA
More informationEC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR
VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,
More informationHYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb
NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC
More informationROCK EXCAVATION. Taking Care. of Customers. Worldwide. with Better. Solutions
ROCK EXCAVATION T E C H N O L O G Y Taking Care of Customers Worldwide with Better Solutions Productive Solutions for Tough Jobs. The innovative Vermeer T1255 Terrain Leveler surface excavation machine
More informationCrawler excavator R 976
Crawler excavator R 976 Operating Weight with Backhoe Attachment: 85,3 95,5 kg Operating Weight with Shovel Attachment: 9,8 92,6 kg Engine Output: 4 kw / 544 P Bucket Capacity: 2. 6.6 m³ Shovel Capacity:
More informationCat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.
Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator
More informationTechnical Description R 9350 Hydraulic Excavator
Technical Description R 9350 ydraulic Excavator litronic` Operating Weight with Backhoe Attachment 302,0 t/665,800 lb Operating Weight with Shovel Attachment 310,0 t/683,400 lb Engine Output 1120 kw (1500
More informationSB-85 PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (220,460 lb) Operating Weight kg (134,700 lb)
SB-85 PIPELAYER Net Horsepower 238 kw (320 hp) Max Lifting Capacity 100 000 kg (220,460 lb) Operating Weight 61 100 kg (134,700 lb) SB-85 PIPELAYER High stability and low ground pressure Easy operation
More informationPM-465. Cold Planer. Cat 3406C JWAC Diesel Engine Gross power 373 kw 500 hp Standard Cutting Width 2006 mm 79" Maximum Cutting Depth 305 mm 12"
PM-465 Cold Planer Machine shown may have optional equipment. Cat 3406C JWAC Diesel Engine Gross power 373 kw 500 hp Standard Cutting Width 2006 mm 79" Maximum Cutting Depth 305 mm 12" PM-465 Cold Planer
More informationHydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump
14 Engine Base engine for use in the U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Manufacturer and Model John Deere PowerTech PWX John Deere 4045H Non-Road
More informationCOMPACT HYDRAULIC EXCAVATOR PC70-8
PC70-8 FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP / 1950 min -1 Net: 48.5 kw 65 HP / 1950 min -1 OPERATING WEIGHT 6590 kg BUCKET CAPACITY 0.30-0.37m 3 PC 70 Photos may include optional equipment. COMPACT
More informationWith Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
More informationTL12 Compact Track Loader
Those in the know, know Takeuchi TL12 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - EPA Interim Tier 4 Compliant - Turbocharged and Intercooled - DOC+DPF Exhaust
More informationTechnical Data. Specifications & Capacities. Telescopic Crawler Crane S5. 50 Ton (51mt Export Machine)
1 5646-0314-S5 Technical Data Specifications & Capacities Telescopic Crawler Crane Ton (51mt Export Machine) CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB280FR From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Automatic Fuel
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB235-2 From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 - Automatic Fuel Bleed System - Dual Element Air Filter - Automatic Idle ELECTRICAL
More informationBACKHOE LOADERS CONTENTS
BACKHOE LOADERS CONTENTS Features...............................-1 Specifications...........................-3 416E:......................-6 Lift Capacities.........................-8 420E/420E IT:......................-9
More informationZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC-5 90 kw (121 hp) ZX180LC-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX180LC-5 Manufacturer and Model Isuzu 4JJ1 Non-Road Emissions Standards Certified
More informationEC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l
VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l Turbocharged VOLVO diesel engine with water cooling, direct injection and charged
More informationCX75C OPERATOR ENVIRONMENT
CX75C MSR EXCAVATOR STANDARD & OFFSET BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel
More informationSB-60 PRELIMINARY PIPELAYER. Net Horsepower 238 kw (320 hp) Max Lifting Capacity kg (158,731 lb) Operating Weight kg (112,655 lb)
SB-60 PIPELAYER Net Horsepower 238 kw (320 hp) Max Lifting Capacity 72 000 kg (158,731 lb) Operating Weight 51100 kg (112,655 lb) PRELIMINARY SB-60 PIPELAYER High stability and low ground pressure Easy
More informationZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)
ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC-5 119 kw (150 hp) zx210/210lc-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX210-5 / ZX210LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emission Standards
More informationCX80C OPERATOR ENVIRONMENT
CX80C EXCAVATOR SWING BOOM TIER 4 FINAL CERTIFIED PRELIMINARY ENGINE Model Type Cylinders Isuzu AP-4LE2X, Tier 4 Final Certified Water-cooled, 4-cycle. Turbo-charged w/ air-cooled intercooler w/ DOC 4-cylinder
More informationHYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C
E HYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C This innovative system technology includes the exclusive energyefficient; Positive Control twin-circuit hydraulic
More informationFORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier
NET HORSEPOWER 107 kw 143 HP @ 1950 rpm OPERATING WEIGHT 28610 kg 63,074 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier PC 200 LL FORESTRY MACHINE Local
More information963D WH Waste Handler
963D WH Waste Handler Supplement Note: For standard specifications and features, refer to the standard Caterpillar specalog for this machine. Engine Engine Model Cat C6.6 ACERT Net Flywheel Power 141 kw
More information55-7A. Dimensions. Working Ranges. Standard Equipment
Dimensions Unit (mm) Working Ranges Standard Equipment Boom length 3,000 mm(9' 10") Arm length 1,600 mm(5' 3") 1,900 mm(6' 3") A Max. digging reach A' Max. digging reach at ground B Max. digging depth
More informationLubricant and Coolant Capacity
Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt
More informationCrawler Tractor PR 734-4
Crawler Tractor PR 734-4 litronic` Engine output: 150 kw / 204 HP Operating weight: 17,960 20,000 kg Basic machine Engine Liebherr Diesel engine Rating (ISO 9249) Rating (SAE J1349) Rated speed Displacement
More informationR 934 B. Technical Description Hydraulic Excavator. Machine for Industrial Applications. Operating Weight 69,885 73,630 Engine Output 197 HP (145 kw)
Technical Description Hydraulic Excavator R 934 B litronic` Machine for Industrial Applications Operating Weight 69,88 73,63 Engine Output 197 HP (14 kw) Technical Data Engine Rating per ISO 9249 197 HP
More informationCX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED
CX80C EXCAVATOR DOZER BLADE TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Fuel Type Cylinders Isuzu AP-4LE2X Tier 4 Final Requires ultra low-sulfur fuel B5 biodiesel tolerant Water-cooled,
More informationCOMPACT HYDRAULIC EXCAVATOR PC70-8
FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP / 1950 min -1 Net: 48.5 kw 65 HP / 1950 min -1 OPERATING WEIGHT 6590 kg BUCKET CAPACITY 0.30-0.37m 3 PC 70 Photos may include optional equipment. COMPACT HYDRAULIC
More informationTechnical data Hydraulic crawler crane HS 895 HD
Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating
More informationWith Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more
More informationUnprecedented precision and ease of operation.
REX130 EXCAVATOR Unprecedented precision and ease of operation. This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A
More informationFrom World First to World Leader
HYDRAULIC EXCAVATOR TB260 From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Automatic Fuel Bleed
More informationEC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM
VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel
More informationTechnical data Hydraulic crawler crane HS 885 HD
Technical data Hydraulic crawler crane HS 885 HD Dimensions Basic machine with undercarriage R 6910 2850 8300 3500 2210 1420 4120 1400 1400 2725 5490 6750 2100 1000 4920 590 R 5520 15200 Operating weight
More informationCITY OF ELBERTON, GEORGIA REQUEST FOR PROPOSAL. IMPORTANT NOTE: Indicate company name and RFP Title on the front of the sealed bid envelope.
CITY OF ELBERTON, GEORGIA REQUEST FOR PROPOSAL RFP TITLE Ride-on RTX 750 Quad Track Tractor ISSUE DATE November 12, 2018 DUE DATE November 26, 2018 2:00 p.m. IMPORTANT NOTE: Indicate company name and RFP
More information953D SH 963D SH 973D SH
95D SH 96D SH 97D SH Shiphold/Port Handling Supplement Note: For standard specifications and features, refer to the standard Caterpillar specalog for this machine. 95D SH 96D SH 97D SH Engine Engine Model
More informationSB-85R Extra ENGINE ELECTRICAL OPERATOR STATION OPERATING WEIGHTS COOLING OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 4f/EU Stage IV STANDARD
PIPELAYER EPA Tier 4/EU Stage IV STANDARD ENGINE Make and model Cummins QSX 15 ELECTRICAL Voltage 24 V Emissions Standard EPA Tier 4f/EU Stage IV Number of batteries 4 Displacement 15 l (915 in3) Battery
More informationCRAWLER DOZER. Blade Capacity up to 27.5 yd 3 (21 m 3 ) Operating Weight 91,491 lb ( kg) Net Horsepower 330 hp (246 kw)
TD-25M CRAWLER DOZER Net Horsepower 330 hp (246 kw) Blade Capacity up to 27.5 yd 3 (21 m 3 ) Operating Weight 91,491 lb (41 500 kg) Motion and Blade Controls The speed ranges, machine direction changes
More informationZAXIS. 210/210LC-5 n 119 kw (159 hp)
n 119 kw (159 hp) EnginE Manufacturer and Model... Isuzu 4HK1 Non-Road Emission Standards... certified to IT4 / Stage IIIB emissions Net Rated Power (ISO 9249)... 119 kw (159 hp) @ 1,900 rpm Cylinders...
More informationavailable models ContaCt InformatIon SPX-460 (46-Ton) Coming soon Europe SPX-660 (66-Ton) SPX-960 (97-Ton) Russia, China and the Middle East India
SPX-960 Pipelayer Max lift capacity Operating weight Net flywheel power 96,000 kg / 211,200 lb 61,000 kg / 134,500 lb 324 kw / 440 HP SPX-960 PIPELAYER General Specifications TIER 3 ENGINE All SPX-Series
More information2050M. Transmission cooling: Tube and fin Core size in 2 (0.33 m 2 ) (2) 12-volt, low-maintenance 950 cold-cranking 0 F (-18 C)
2050M LT/XLT/WT/LGP CRAWLER DOZER TIER 4 INTERIM CERTIFIED ENGINE Model FPT F4HFE613J Tier 4 Interim Certified Cylinders 6 Displacement 409 in 3 (6.7 L) Fuel injection Fuel Fuel filter Air intake Direct
More informationBACKHOE LOADERS CONTENTS
BACKHOE LOADERS CONTENTS Features...............................-1 Specifications...........................-3 416E:......................-6 Lift Capacities.........................-8 420E/420E IT:.....................-11
More informationDrilling Rig LB enus LB
Drilling Rig LB 44-51 enus LB 26.5 Concept and characteristics Leader top for Kelly rope (drilling axis - 4.6 ft) Leader top for auxiliary rope Kelly rope Kelly Inclination device Crowd winch Rotary (drilling
More informationZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 2,100 rpm Operating Weight: 63,425 lb. ( kg) Backhoe Bucket: 1.74 cu. yd. (1.
ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 kw) @ 2,100 rpm Operating Weight: 63,425 lb. (28 770 kg) Backhoe Bucket: 1.74 cu. yd. (1.34 m 3 ), 42 in. (1065 mm) ZAXIS 270LC-3 SPECIFICATIONS Engine
More informationNumber of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70%
CX75 EXCAVATOR TIER III CERTIFIED ENGINE Model Isuzu AU-4LE2X,Tier III certified Type 4-stroke turbocharged Cylinders 4 Bore/Stroke 3.35 in x 3.78 in (85 x 96 mm) Displacement 133 in 3 (2179 cc) Fuel injection
More informationTXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator
Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,
More informationFLYWHEEL HORSEPOWER 40,5 kw / rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,28 m³ PC78MR-6 78MR-6. Midi-Excavator PC78MR-6
FLYWHEEL HORSEPOWER 40,5 kw / 54 HP @ 1.850 rpm OPERATING WEIGHT 8.270 kg BUCKET CAPACITY 0,28 m³ PC 78MR-6 Midi-Excavator M IDI-EXCAVATOR PRODUCTIVITY FEATURES Tight tail swing Operators can focus more
More information290G LC. 147 kw (197 hp)
290G LC 147 kw (197 hp) 290G LC Engine 290G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the
More information250G LC. 142 kw (191 hp)
250G LC 142 kw (191 hp) 250G LC Engine 250G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the
More informationSAVANNAH GEORGIA USA
EK240 SAVANNAH GEORGIA USA THE COMPANY CZM has over 40 years of foundation equipment manufacturing experience with a wide range of models for multiple applications: drilled shafts, CFA, driven piles with
More informationSB-60M Extra ELECTRICAL ENGINE OPERATOR STATION COOLING OPERATING WEIGHTS OPTIONAL COMPONENTS HYDRAULICS PIPELAYER. EPA Tier 3/EU Stage IIIA STANDARD
PIPELAYER EPA Tier 3/EU Stage IIIA STANDARD ENGINE Make and model Cummins QSM 11 ELECTRICAL Voltage 24 V Emissions Standard EPA Tier 3/EU Stage IIIA Number of batteries 4 Displacement 11l (671 in3) Battery
More information7. 5 M E T R I C T O N EXCAVATOR C 7 5 C
7. 5 M E T R I C T O N C EXCAVATOR Specifications Engine Type................................... Isuzu CC-4JG1 naturally aspirated direct-injection diesel; certified to EPA Tier 2 emissions Net Peak Power
More informationSAVANNAH GEORGIA USA
EK250 SAVANNAH GEORGIA USA THE COMPANY CZM has over 40 years of foundation equipment manufacturing experience with a wide range of models for multiple applications: drilled shafts, CFA, driven piles with
More informationTD-25M CRAWLER DOZER PRELIMINARY
TD-25M CRAWLER DOZER Net Horsepower 246 kw (330 hp) Blade Capacity up to 21 m 3 (27.5 yd 3 ) Operating Weight 41 500 kg (91,491 lb) PRELIMINARY 246 kw (330 hp) Cummins QSX15 engine meets EU Stage IIIA
More informationEngine. Engine Torque. Weights. Steering. 924G Wheel Loader specifications
Engine Model Caterpillar 3056E DIT ATAAC Rated Net Power @ 2,300 rpm SAE J1349 96 kw 129 hp ISO 9249 97 kw 130 hp EEC 80/1269 97 kw 130 hp Maximum Net Power @ 1,900 rpm SAE J1349 102 kw 137 hp ISO 9249
More informationEC140B LC VOLVO EXCAVATOR
VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection
More information9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3")
9.50M BACKHOE LOADER Net Horsepower 70 kw (95 hp) Operating Weight 8900 kg (19,621 lb) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3") Safe ROPS/FOPS operator
More information822 / L830 FELLER BUNCHERS
822 / FELLER BUNCHERS The 822/ series feller bunchers are designed for demanding thinning and final fell applications. Tigercat achieved zero tail-swing without compromising serviceability or operator
More informationSPX-660 Pipelayer Max lift capacity 65,300 kg / 143,960 lb Operating weight 45,995 kg / 101,400 lb Net flywheel power 261 kw / 350 HP
SPX-660 Pipelayer Max lift capacity Operating weight Net flywheel power 65,300 kg / 143,960 lb 45,995 kg / 101,400 lb 261 kw / 350 HP SPX-660 PIPELAYER TIER 3 ENGINE All SPX-Series pipelayers are built
More information