CONTENTS. Wafer. Double Flange. Wafer Lug. Hub End. Buttwelding. Chapter 1 Introductory Pages. Chapter 2 Installation Dim. Chapter 3 Reference Data
|
|
- Delilah King
- 5 years ago
- Views:
Transcription
1 ONTENTS hapter 1 Introductory Pages Reference Standard and Specification ontents(with Types) 1 Typical Selection 2 oding System 3 3D Assembly Drawings 4 hapter 2 Installation Dim Installation Dimension A. Wafer ASME B B. Wafer ASME B16.47 Ser.A 7. Wafer ASME B16.47 Ser.B 8 D. Wafer API 6A 9 E. Wafer JIS B F. Wafer AWWA 207 lass D11 G. Lug ASME B H. Lug ASME B16.47 Ser.A 13 I. Lug ASME B16.47 Ser.B 14 J. Double Flange ASME B K. Double Flange ASME B16.47 Ser.A 16 L. Double Flange ASME B16.47 Ser.B 17 M. Hub End 18 N. Buttwelding ASME B (Other standards applicable by customer s request) hapter 3 Reference Data Wafer Double Flange Wafer Lug Production Range (with Large Valves) 20 ryogenic Valves 20 Special Equipments 21 Technical Data 22 Installation 23 Impact Testing of Low Alloy Steel 24 ASTM-JIS Material omparison List 25 Material Specification 26~27 Special Alloy Steel 28 ertificates Hub End Buttwelding
2 TYPIAL SELETION TYPIAL MATERIAL SELETION API Trim#1. (F6) WB (A105) / 13%r. / 410SS Overlay on Body Seat / Inconel X-750 API Trim#5. (HF) WB (A105) / 13%r. / Stellite#6 Overlay on Body & Plate Seats (Full HF) / Inconel X-750 API Trim#8. (F6 & HF) WB (A105) / 13%r. / Stellite#6 Overlay on Body Seat (Half HF) / Inconel X-750 API Trim#10. (316SS) WB (A105) / 316SS / 316SS Overlay on Body Seat / Inconel X-750 API Trim#12. (316SS & HF) WB (A105) / 316SS / Stellite#6 Overlay on Body Seat (Half HF) / Inconel X-750 FOR SEA WATER APPLIATION: B (Ni-Al Bronze) / B / EPDM / Inconel X-750 or B (Ni-Al Bronze) / Monel / EPDM / Monel K500 SPEIAL NOTE 1. API 594 Peach Valve produces all Dual Plate heck Valves as per API Retainerless For 100% no outer leakage. Peach Valve provides "Retainerless Type" Dual Plate heck Valves for fugitive emission control. 3. Flange Standard ASME B16.5 for 2" ~ 24" ASME B16.47 Ser. A or B for 26 and above. ustomer's Specification and etc. (AWWA, ASME Sec. VIII...) 4. Seat Leakage For metal to metal seated Dual Plate heck Valves, API598 indicate 3cc/min per inch with water 5. Double Flange Double Flange Type available from 8" and above 6. Rubber Lining inside of Body Rubber lining inside body available from 10" and above VALVE TRIM MATERIAL Trim No. Body Seat* Plate Seat* Stem(Hinge Pin) Norminal Trim HD Symbol Surface Surface and Stop Pin Note 01 F6 13 r 13 r 13 r Available Optionally r-8ni 18 r-8ni 18 r-8ni Available Optionally 05 Hard Face (HF) Stellite No. 6 Stellite No r HD Standard No F6 & HF Stellite No r 13 r HD Standard No Monel Ni-u Alloy Ni-u Alloy Ni-u Alloy Available Optionally r-10Ni-2Mo 18r-10Ni-2Mo 18r-10Ni-2Mo Available Optionally 11 Monel & HF Stellite No. 6 Ni-u Alloy Ni-u Alloy Available Optionally & HF Stellite No. 6 18r-10Ni-2Mo 18r-10Ni-2Mo Available Optionally 13 Alloy 20 19r-29Ni 19r-29Ni 19r-29Ni Available Optionally 14 Alloy 20 & HF Stellite No. 6 19r-29Ni 19r-29Ni Available Optionally * The material of the plate & body seat should have equal corrosion resistance of the material of the shell. Peach Valve 02-03
3 2 EX : SIZE 4 1 TYPE A 3 RATING R FAE W S 1 BODY & PLATE MATERIAL 6 SEAT X SPRING = 24inch wafer Type; lass 150; RF; A216 WB-Body; A15-Plate; Half Stellite; inconel X-750 spring FAE F R R1 J T Z SG LG SF LF H S BT NP A126 lass B, G200 (F200 alternative) A A439 D2 A216 Gr.WB, (Forged:A105) A216 Gr.W A217 Gr.W1 A217 Gr.W6 A217 Gr.W9 A217 Gr.5 A217 Gr.LB A217 Gr.L A217 Gr.L1 A217 A15 A351 F8 A351 F8M A351 F3M A351 F10 A351 F8 A A351 G8M A351 G3M A351 N7M A351 D4Mu A351 F3 A352 A6NM A351 E8MN A182 F51 A351 H8 B B TYPE Flat Face Raised Face Raised Face Ring Joint Tong Face Ref. to Drawing Small Groove Large Groove Small Female Large Female Hub Screw Buttwelding NPT Screw REMARK SUS 410 SUS 304 SUS 316 SUS 316L SUS 347 SUS 317 SUS 317L Alloy 20 25r Duplex SUS 304L A Ti 22 r Duplex REMARK ALB1 (A701) 63 AARH 250 AARH 63 AARH 63 AARH 63 AARH Smooth Finish Sprial Serrated Smooth Finish Smooth Finish Smooth Finish 63 AARH 63 AARH 63 AARH 63 AARH Smooth Finish Smooth Finish Smooth Finish Smooth Finish A890 4A (UNS J92205) D3MN A890 5A (UNS J93404) E3MN A890 6A (UNS J93380) E3MWuN A351 K-3MuN B Alloy 625 Alloy 825 Monel Titanium Hastelloy 22r Duplex (UNS S31803) A182 F51 22r Duplex (UNS S32750) A182 F53 22r Duplex (UNS S32760) A182 F55 UNS S31254 Aluminum S X M H T L RATING ast Iron abbr JIS B2210 J ASME(ANSI) B16.5 A ASME(ANSI) B16.47 Ser.A AA ASME(ANSI) B16.47 Ser.B AB ISO DIN S TAYLAR T AWWA 207 AW D E KS B 1511 K JPI 7S-15 JP BS 1560 B KS D 3578 F F12 F15 API 6A AP SPRING MATERIAL STS316 WPA (SUS316WPA) Inconel X-750 Monel K-500 Hastelloy Titanium TORQUE Low L High H Extra X Min. M Pin Retainerless Wafer Pin Retainerless Double Flanged Pin Retainerless Wafer Lug Hub Ended By-Pass Attached Double Flanged Buttwelding Pin Retainerless Hub Pin Retainerless Buttwelding Wafer By-Pass Attached Wafer Double Flanged (Full Flanged) Wafer Lug Extended Body Wafer Type Single Plate heck Valve PN20 F SEAT Hardness Aluminum B B B564 (UNS N06625) B564 (UNS N08825) A494 M35-1 N N F S E I U L EL T O S6 S1 S4 SL M 6 66 S1M A6 A8 TU6 A6L A8L Tensile Strength 3(31) 3(31) 7(71) Transform % NBR (BUNA-N) 40±5 R (Neoprene) 30±5 FPM (Viton) 60±5 SI (Silicone) EPDM (EPT) 40±5 7(71) 400 IIR (Butyl) UR (Urethane) R (Lining) EPDM (Lining) PTFE (Teflon) Non-Overlay SS316 Overlay on Body SS410 Overlay on Body SS308 Overlay on Body SS316L Overlay on Body Monel Overlay on Body or Plate Stellite #6 Overlay on Body Stellite #6 overlay on Body & Plate SS410 Overlay on Body, Ni & Monel Overlay on Plate Alloy 625 Overlay on Body Alloy 825 Overlay on Body Tungsten Body with Stellite #6 Overlay on Body Internal Alloy 625 ladded Internal Alloy 825 ladded SY ST EM ASTM O DI N G BODY & PLATE MATERIAL JIS AST IRON / DUTILE IRON G250(F250) D GD450(FD450) D2 AST STEEL W SPH2 (Forged:SFV2A) W1 U1 SPH11 U SPH21 U9 SPH32 S5 SPH61 L L L1 SPL11 STAINLESS STEEL S1 SS1 S3 SS13 S4 SS14 SL SS16 S10 S21 SS21 S12 SG SGL SN SS23 SD4 S3L SS19A S6 SS6 STI SK3 S8 SS8 SPEIAL ALLOY A ALB3 (A703) B B6 (A406) A A4 A2 A5 A6 Incoloy 625 A8 Incoloy 825 M T H S04 S05 S06 SK AL
4 3D ASSEMBLY DRAWINGS 1. BODY 2. PLATE 3. SPRING 4. STOP PIN 5. HINGE PIN 6. THRUST BEARING 7. THRUST PLATE 8. BEARING 9. THRUST PIN Peach Valve 04-05
5 A. Wafer ASME B B. Wafer ASME B16.47 Ser.A 7. Wafer ASME B16.47 Ser.B 8 D. Wafer API 6A 9 E. Wafer JIS B F. Wafer AWWA 207 lass D11 G. Lug ASME B H. Lug ASME B16.47 Ser.A 13 I. Lug ASME B16.47 Ser.B 14 J. Double Flange ASME B K. Double Flange ASME B16.47 Ser.A 16 L. Double Flange ASME B16.47 Ser.B 17 M. Hub End 18 N. Buttwelding ASME B
6 Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 1, 6 WAFER TYPE INSTALLATION DIMENSIONS ASME B16.5 ( ANSI B16.5 ) Peach Valve RF / RF / (50) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ RF/RJ / RF/RJ / /2(65) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ RF / RF / (80) 600 RF / RF/RJ / RF/RJ / RF/RJ / RF / RF / (100) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF/RJ / (125) 300 RF/RJ / RF/RJ RF / RF / (150) 8(200) 10(250) 12(300) 600 RF/RJ RF/RJ / RF/RJ / RF/RJ RF / RF / RF/RJ / RF/RJ / RF/RJ / RF/RJ RF / RF RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF / RF / RF/RJ / RF/RJ / RF/RJ RF/RJ / RF RF / (350) 600 RF/RJ / RF/RJ / RF/RJ / RF RF / (400) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF/RJ / (450) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF/RJ / (500) 600 RF/RJ / RF/RJ RF/RJ RF/RJ / RF/RJ / (600) 600 RF/RJ / RF/RJ / RF/RJ /
7 Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 150 RF / RF/RJ / (650) 600 RF/RJ / RF/RJ / RF / RF/RJ / (700) 600 RF/RJ RF/RJ RF / RF/RJ / (750) 600 RF/RJ RF/RJ RF / RF/RJ / (800) 600 RF/RJ / RF/RJ / RF / RF/RJ / (850) 600 RF/RJ / RF/RJ / RF / RF/RJ (900) 600 RF/RJ / RF/RJ / RF / RF /2 - - (950) 600 RF / RF / RF / RF / (1000) 600 RF / RF / RF / RF / (1050) 600 RF / RF / RF / RF /4 - - (1100) 600 RF / RF / RF / RF /8 - - (1150) 600 RF / RF RF / RF / (1200) 600 RF / RF RF / RF (1250) 600 RF RF / RF (1300) 600 RF RF / RF /4 - - (1350) 600 RF RF / RF /4 - - (1400) 600 RF / RF / RF /4 - - (1450) 600 RF / RF / RF / (1500) 600 RF / , 6 WAFER TYPE INSTALLATION DIMENSIONS ASME B16.47 Ser. A ( ANSI B16.47 Ser.A )
8 1, 6 WAFER TYPE INSTALLATION DIMENSIONS ASME B16.47 Ser.B ( ANSI B16.47 Ser.B ) Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 150 RF / RF/RJ / (650) 600 RF/RJ / RF/RJ / RF / RF/RJ / (700) 600 RF/RJ / RF/RJ / RF / RF/RJ / (750) 600 RF/RJ / RF/RJ RF / RF/RJ / (800) 600 RF/RJ RF/RJ RF / RF/RJ / (850) 600 RF/RJ / RF/RJ / RF / RF/RJ / (900) 600 RF/RJ / RF/RJ RF (950) 300 RF / RF (1000) 300 RF / RF (1050) 300 RF / RF (1100) 300 RF / RF /8 - - (1150) 300 RF / RF / (1200) 300 RF / RF / (1250) 300 RF / RF / (1300) 300 RF / RF / (1350) 300 RF / RF / (1400) 300 RF / RF / (1450) 300 RF / RF / (1500) 300 RF / Peach Valve 08-09
9 1, 6 WAFER TYPE INSTALLATION DIMENSIONS API6A-(TYPE 6B) Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in. ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 2000 RJ / / RJ / RJ / RJ / / RJ RJ RJ / / RJ / RJ / RJ / / RJ / RJ / RJ / RJ / RJ / RJ / RJ / RJ / RJ / RJ / RJ / RJ / RJ / RJ / / RJ / RJ / / RJ / RJ / / RJ /8 - - API6A-(TYPE 6BX) 4 1/ RJ-BX / / RJ-BX / RJ-BX / / RJ-BX /8 - -
10 1, 6 WAFER TYPE INSTALLATION DIMENSIONS KS B1511 / JIS B2210 Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx mm ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 50 10K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M K RF/FF M Peach Valve 10-11
11 Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 4(100) 150~175 FF (125) 150~175 FF (150) 150~175 FF (200) 150~175 FF (250) 150~175 FF (300) 150~175 FF (350) 150~175 FF (400) 150~175 FF (450) 150~175 FF (500) 150~175 FF (600) 150~175 FF (650) 150~175 FF (700) 150~175 FF (750) 150~175 FF (800) 150~175 FF (850) 150~175 FF (900) 150~175 FF (950) 150~175 FF (1000) 150~175 FF (1050) 150~175 FF (1100) 150~175 FF (1200) 150~175 FF (1250) 150~175 FF (1300) 150~175 FF (1350) 150~175 FF (1500) 150~175 FF (1650) 150~175 FF (1800) 150~175 FF (1950) 150~175 FF (2100) 150~175 FF (2250) 150~175 FF (2400) 150~175 FF (2550) 150~175 FF (2700) 150~175 FF (2850) 150~175 FF (3000) 150~175 FF (3150) 150~175 FF (3300) 150~175 FF (3450) 150~175 FF (3600) 150~175 FF , 6 WAFER TYPE INSTALLATION DIMENSIONS AWWA 207 LASS D ( STEEL-RING FLANGE )
12 Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 4, 8 WAFER LUG TYPE INSTALLATION DIMENSIONS ASME B16.5 ( ANSI B16.5 ) Peach Valve RF / RF / (50) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ RF/RJ / RF/RJ / /2(60) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ RF / RF / (80) 600 RF / RF/RJ / RF/RJ / RF/RJ / RF / RF / (100) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF/RJ / (125) 300 RF/RJ / RF/RJ RF / RF / (150) 600 RF/RJ RF/RJ / RF/RJ / RF/RJ RF / RF / (200) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ RF / RF (250) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF / RF / (300) 600 RF/RJ / RF/RJ / RF/RJ RF/RJ / RF RF / (350) 600 RF/RJ / RF/RJ / RF/RJ / RF RF / (400) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF/RJ / (450) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF/RJ / (500) 600 RF/RJ / RF/RJ RF/RJ RF/RJ / RF/RJ / (600) 600 RF/RJ / RF/RJ / RF/RJ /
13 Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 150 RF / RF/RJ / (650) 600 RF/RJ / RF/RJ / RF / RF/RJ / (700) 600 RF/RJ RF/RJ RF / RF/RJ / (750) 600 RF/RJ RF/RJ RF / RF/RJ / (800) 600 RF/RJ / RF/RJ / RF / RF/RJ / (850) 600 RF/RJ / RF/RJ / RF / RF/RJ (900) 600 RF/RJ / RF/RJ / RF / RF /2 - - (950) 600 RF / RF / RF / RF / (1000) 600 RF / RF / RF / RF / (1050) 600 RF / RF / RF / RF /4 - - (1100) 600 RF / RF / RF / RF /8 - - (1150) 600 RF / RF RF / RF / (1200) 600 RF / RF RF / RF (1250) 600 RF RF / RF (1300) 600 RF RF / RF / (1350) 600 RF RF / RF /4 - - (1400) 600 RF / RF / RF /4 - - (1450) 600 RF / RF / RF / (1500) 600 RF / , 8 WAFER LUG TYPE INSTALLATION DIMENSIONS ASME B16.47 Ser. A ( ANSI B16.47 Ser.A )
14 4, 8 WAFER LUG TYPE INSTALLATION DIMENSIONS ASME B16.47 Ser.B ( ANSI B16.47 Ser.B ) Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 150 RF / RF/RJ / (650) 600 RF/RJ / RF/RJ / RF / RF/RJ / (700) 600 RF/RJ / RF/RJ / RF / RF/RJ / (750) 600 RF/RJ / RF/RJ RF / RF/RJ / (800) 600 RF/RJ RF/RJ RF / RF/RJ / (850) 600 RF/RJ / RF/RJ / RF / RF/RJ / (900) 600 RF/RJ / RF/RJ RF (950) 300 RF / RF (1000) 300 RF / RF (1050) 300 RF / RF (1100) 300 RF / RF /8 - - (1150) 300 RF / RF / (1200) 300 RF / RF / (1250) 300 RF / RF / (1300) 300 RF / RF / (1350) 300 RF / RF / (1400) 300 RF / RF / (1450) 300 RF / RF / (1500) 300 RF / Peach Valve 14-15
15 3, 7 DOUBLE FLANGE TYPE INSTALLATION DIMENSIONS ASME B16.5 ( ANSI B16.5 ) Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 150 RF / RF /8-85 8(200) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ RF / RF (250) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF / RF / (300) 600 RF/RJ / RF/RJ / RF/RJ RF/RJ / RF RF / (350) 600 RF/RJ / RF/RJ / RF/RJ / RF RF / (400) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF/RJ / (450) 600 RF/RJ / RF/RJ / RF/RJ / RF/RJ / RF/RJ / (500) 600 RF/RJ / RF/RJ RF/RJ RF/RJ / RF/RJ / (600) 600 RF/RJ / RF/RJ / RF/RJ /2-3050
16 3, 7 DOUBLE FLANGE TYPE INSTALLATION DIMENSIONS ASME B16.47 Ser.A ( ANSI B16.47 Ser.A ) Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 150 RF / RF/RJ / (650) 600 RF/RJ / RF/RJ / RF / RF/RJ / (700) 600 RF/RJ RF/RJ RF / RF/RJ / (750) 600 RF/RJ RF/RJ RF / RF/RJ / (800) 600 RF/RJ / RF/RJ / RF / RF/RJ /8 - - (850) 600 RF/RJ / RF/RJ / RF / RF/RJ (900) 600 RF/RJ / RF/RJ / RF / RF /2 - - (950) 600 RF / RF / RF / RF / (1000) 600 RF / RF / RF / RF / (1050) 600 RF / RF / RF / RF /4 - - (1100) 600 RF / RF / RF / RF /8 - - (1150) 600 RF / RF RF / RF / (1200) 600 RF / RF RF / RF (1250) 600 RF RF / RF (1300) 600 RF RF / RF / (1350) 600 RF RF / RF /4 - - (1400) 600 RF / RF / RF /4 - - (1450) 600 RF / RF / RF / (1500) 600 RF /2 - - Peach Valve 16-17
17 Size Pressure End A B E F R Flange STUD Valve Rating Facing Bolt Diameter Length Approx in.(mm) ANSI mm mm mm mm mm ircle No. inches mm Weight(Kg) 150 RF / RF/RJ / (650) 600 RF/RJ / RF/RJ / RF / RF/RJ / (700) 600 RF/RJ / RF/RJ / RF / RF/RJ / (750) 600 RF/RJ / RF/RJ RF / RF/RJ / (800) 600 RF/RJ RF/RJ RF / RF/RJ /2 - - (850) 600 RF/RJ / RF/RJ / RF / RF/RJ / (900) 600 RF/RJ / RF/RJ RF (950) 300 RF / RF (1000) 300 RF / RF (1050) 300 RF / RF (1100) 300 RF / RF /8 - - (1150) 300 RF / RF / (1200) 300 RF / RF /8 - - (1250) 300 RF / RF /8 - - (1300) 300 RF / RF / (1350) 300 RF / RF /8 - - (1400) 300 RF / RF /4 - - (1450) 300 RF / RF / (1500) 300 RF / , 7 DOUBLE FLANGE TYPE INSTALLATION DIMENSIONS ASME B16.47 Ser.B ( ANSI B16.47 Ser.B )
18 9, 12 HUB END TYPE 11, 13 BUTTWELDING TYPE ASME B16.25 Hub End Type: lass 150~2500 ( 3" Over ) Buttwelding Type: lass 900~2500 ( 3" Over ) Peach Valve 18-19
19
20 PRODUTION RANGE RYOGENI VALVES Item Range Size & lass Range Material Range Retainerless Wafer Type Duplex Retainerless Lug Type Monel Dual Plate heck Valve Retainerless Double Flange Type 2~144 B; 150~10000 lb Titanium (API 594) Buttwelding Type Hastelloy Hub Type (Optionally Plug Type) Alloy 625 and Inconel Alloy Gate (API 600, API 603) Alloy 825 and Incoloy Alloy asting Valve Globe (BS 1873) 2B ~36B; 150~2500 lb Z-100 and Nickel Alloy Swing heck (BS 1868) N7M and arpetner Alloy Others Stainless Steel ryogenic Valves ast Steel Bellows Sealed Valves ast Iron avity Free Half Ball Valves Al-Bronz and Bronze Plasma VD Diamond oating Ductile Iron PRODUTION RANGE (WITH LARGE VALVES) RYOGENI VALVES ertificate of Registration by Korea Gas orporation (KOGAS) Along with the growth of LNG industry, Peach Valve has invested in its production and test facilities for cryogenic valves in recent years. Last year of 2008, Korea Gas orporation (KOGAS) approved the ability and quality of Peach Valve cryogenic valves and admitted Peach Valve as its valuable supplier for the demand of cryogenic valves. Peach Valve 20-21
21 SPEIAL EQUIPMENTS 1. MULTILPE PROESSING MEHANISM 2. MEHANISM OF PLASMA VD DIAMOND OATING 3. 3D MEASURING MEHANISM SPEIAL EQUIPMENTS
22 TEHNIAL DATA Opening Pressure & v Size Spring (mm Aq) Inch(mm) Standard Low oil Standard v + Weight of Plate 2 (50) (65) (80) (100) (125) (150) (200) (250) (300) (350) (400) omparison of heck Valves (Dual Plate, Swing and Lift Types) Weight(kg) -10K lass Size (mm) Type Dual Plate Swing Lift Face to Face Dimension(mm) - 10K lass Size (mm) Type Dual Plate Swing Lift omparison of haracteristic haracter Swing check Lift check Dual plate check Weight Heavy Medium Light Face to Face Dim. Large Medium Small Direction of Installation Horizontal / Vertical Generally Vertical Horizontal / Vertical Support Beam Required Min. 150A (10kg) Required Min 200A (10kg) Not Required Workmanship (At the Installation and Others) Not Good Not Good Good Prevention of Water Hammer Not Good Very Good Very Good Resistance of Fluid Loss of Pressure Not Good Very Good Normal Energy effectiveness Not Good Good Very Good Flow ondition Not Good Not Good Good urve of Head Loss Prevention of Water Hammer HEAD LOSS(mAq) (2 ) 65(2 1/2 ) 80(3 ) 100(4 ) 125(5 ) 150(6 ) 200(8 ) 250(10 ) 300(12 ) 350(14 ) 400(16 ) 450(18 ) 4.2K TOP STREAM POINT 4.1K DOWN STREAM POINT 7.5K 1sec LIFT TYPE 4.3K K TOP STREAM POINT 7.4K WAFER TYPE TOP STREAM POINT 4.2K 8.7K SWING TYPE X X X X HEAD LOSS HART AMOUNT OF FLOW( /MIN) 4.2K DOWN STREAM POINT 1sec DOWN STREAM POINT 1sec Peach Valve 22-23
23 INSTALLATION OF THE DUAL PLATE HEK VALVE 1. Basic Method Install the valve making the arrow mark in the valve along to the flow direction. Regardless of the vertical or horizontal pipeline, the valve pin should be perpendicular to the flow direction. Direction of Fluid Direction of Fluid O X 2. In the Bending Lines 5 DIAMETERS MINIMUM FROM BEND TO VALVE 2 DIAMETERS MINIMUM AFTER VALVE TO BEND 3. With Other Valves 2 diameters minimum after valve to reducer and 5 diameter minimum from bend or reducer/expander to valve. 5 DIAMETERS MINIMUM FROM VALVE TO VALVE 2 DIAMETERS MINIMUM AFTER VALVE TO BEND *** 6 times diameter distance from turbulence in the pipeline will keep the durability of the valves. IN ST AL LA TI ON 2 DIAMETERS MINIMUM FROM VALVE TO VALVE
24 1. Scope Materials of valve parts for the service of -10 or under shall be subject to the impact test in accordance with this procedure. IMPAT TESTING OF LOW ALLOY STEEL 2. Testing Area Body and Bonnet Material: ASTM A350 Gr LF1, LF2, LF3, SUS304, SUS316 (ASTM A182 F304 or F316) 3. Method The impact test shall be made in accordance with the provisions for the case where the harpy impact test machine is used in A370, "Method of Impact Test for Metallic Materials." 4. Impact Test Pieces Table 1. harpy V-Notch Energy Requirements for Standard Size (10 by 10 min.) Specimens GRADE Minimum impact energy required for Minimum impact energy permitted for average of each set of three specimens lbf(j) one specimen only of a set, ft. (J) LF1 & LF9 13 (18) 10 (14) LF2, LF3,LF5, LASS1 15 (20) 12 (16) Table 2. Standard Impact Test Temperature for Standard Size (10 by 10 min.) Specimens LF 1 LF 2 LF 3 LF 5, lass1 & 2 LF 9 LF 787, lass 2 LF 787, lass 3-20 F(-28.9) -50 F(-45.6) -150 F(-101.1) -75 F(-28.9) -20 F(-28.9) -75 (-59 ) -100 (-73 ) Table 3. Minimum Equivalent Absorbed Energy for Various Specimen Sizes* Standard Size (10 by 10 min.) 3/4 (10 by 7.5 min.) 2/3 (10 by 7.5 min.) 1/2 (10 by 7.5 min.) 1/3 (10 by 7.5 min.) 1/4 (10 by 7.5 min.) * Straight line interpolation for intermediate valves is permitted. Table 4. harpy Impact Test Temperature Reduction below Table 2. Test Temperature When the Subsize harpy Impact Width Along Notch is Less Than 80 % of the Forging Thickness Thickness of the Material Represented Size of Bar (Inch) (see of harpy) Temerature Reduction F( ) Impact Specimen width along Notch: Inch (mm) Standard (10) 0 (0) Standard (9) 0 (0) Standard (8) 0 (0) 3/ (7.5) 5 (3) 3/ (7) 8 (5) 2/ (6.67) 10 (6) 2/ (6) 15 (8) 1/ (5) 20 (11) 1/ (4) 30 (17) 1/ (3.33) 35 (20) 1/ (3) 40 (22) 1/ (2.5) 50 (28) Peach Valve 24-25
IFC Series DR Retainerless Dual Disc Check Valves
IF Series DR Retainerless Dual Disc heck Valves 6 1 2 3 4 9 7 8 5 10 Design Features Retainerless design meets industry fugitive emissions control requirements. This design eliminates the potential leak
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C H E C K V A L V E S SERIES T WAFER PATTERN CHECK VALVE HIGH PERFORMANCE HIGH FLOW LARGE UNOBSTRUCTED FLOW PATH RUGGED, HIGH INTEGRITY CONSTRUCTION Series T Installation
More informationCHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL
CHAMPION WAFER CHECK VALVES SIZE RANGE 2" 72" ASME CLASS 125 2500 MATERIALS: IRON CARBON STEEL STAINLESS STEEL ALUMINUM BRONZE ALLOY 20 MONEL NICKEL CHAMPION VALVES, INC. DUAL DISC SPRING LOADED WAFER
More informationChampion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES
Champion Valves, Inc. DUAL DISC SPRING LOADED WAFER CHECK VALVES FEATURES Light weight, versatile design 80% to 90% less than conventional full-body swing check valves Dual Disc open to 80 degrees Spring-loaded
More informationP R E C I S I O N E N G I N E E R E D C H E C K V A L V E S
P R E C I S I O N E N G I N E E R E D C E C K V A L V E S SERIES X EXTENDED BODY CECK VALVE PARTS LIST ITEM PART NAME 1 BODY 2 SEAT INSERT 3 FLAPPER 4 SPRING 5 SPRING PIN 6 SEAT SEAL IG PERFORMANCE IG
More informationFull Port Swing Check Valves Class: Sizes: Piston Check Valves Class: Sizes: 2-36
(281) 482-4728 www.scvvalve.com Full Port Swing heck Valves lass: 150-2500 Sizes: 2-36 Piston heck Valves lass: 150-2500 Sizes: 2-36 Dual Plate heck Valves - Wafer & Lug Wafer Design lass: 150-2500 Sizes:
More informationCHECK VALVES DUAL PLATE CHECK VALVES (DC SERIES) NOZZLE CHECK VALVES (NC SERIES)
CHECK VAVES DUA PATE CHECK VAVES (DC SERIES) NOZZE CHECK VAVES (NC SERIES) eading Korean valve manufacturer DUA PATE CHECK VAVE (DC SERIES) Range Size Fluid Application 1 1/2 (40A) ~ 84 (2100A) Water,
More informationKeystone WINN Hi-Seal High Performance Butterfly Valve
m o Keystone WINN Hi-Seal High Performance Butterfly Valve Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions Features Positive
More informationOSV. Forged Steel Valves Technical book OSV
OSV Forged Steel Valves Technical book OSV Principles Of Company General Introduction Company History About the company OS Valves (OSV) is a subsidiary of OS Company. OSV has been inspiring our employees
More informationCHECK VALVES DUAL PLATE TECHNICAL CATALOGUE.
CHECK VALVES TECHNICAL CATALOGUE DUAL PLATE CHECK VALVES Dual Plate Axial 6 Goodwin International Dual Plate Check Valves - Types Wafer Type R 6 Different ody Styles Wafer (R) Flanged (FR) Solid Lug (SR)
More informationHi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions.
Hi-Seal, high performance butterfly valves offer efficient, bi-directional sealing across a wide spectrum of service conditions. Features Positive sealing which is mechanically achieved and does not rely
More informationStandard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections
Standard-Low Emission Valves to 100 PPM Cast Steel Valves 150 2500 ASME; Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections;
More informationCAST STEEL GATE VALVE
CAST STEEL GATE VALVE DESIGN CHARACTERISTICS OF API00 CAST STEEL GATE VALVE The design of thrust bearing makes valve opened easily and flexibly. Handwheel Nut Handwheel Stem Nut Retainer Stem Nut Lubricating
More informationCheck Valves Working on the Basis of Quality and Trust
www.duocheck.co.kr Check Valves Working on the Basis of Quality and Trust Working on the Basis of Quality and Trust GREETINGS Dear valued customers, Soosung Valve Industry Co., Ltd. (SSV) was founded in
More informationDual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
More informationValves. Fittings. Actuators
Valves Fittings Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; CE Registered Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged,
More informationCompac-Noz Valves High Performance Non-Slam Check Valves
Compac-Noz Valves High Performance Non-Slam Check Valves Compac-Noz Non-Slam Check Valves Scope of Line and Features Sizes 12" - 60" ASME B16.34 & API 6D, pressure classes 150-4500 API 6A pressure classes
More informationKVC VALVES AND PEX FITTINGS
KVC VALVES AND PEX FITTINGS 2011 KVC VALVES & PEX FITTINGS CATALOGUE 2 P a g e Table of contents 1. Cast Steel Valves..4 FIG. 272-CS-15 ( Gate ).....5 FIG. 272-CS-300 ( Gate )......6 FIG. 272-CS-600 (
More informationStandard Product Range
Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer
More informationDifferential Pressure Gauges (701P Series)
Applications Equipped two Process Connections Indicating low and high pressure Measuring differential pressure as well as liquid or flow levels Recommended to use 3-way & 5-way valve manifold Pressure
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationCHECK VALVES - WAFER STYLE
CHECK VALVES - WAFER STYLE SHORT VERSION www.australianpipelinevalve.com.au QUALITY VALVE MANUFACTURER QUALITY COMMITMENT Quality is Our First Priority. Consistent product quality and a proven track record
More informationEstablished in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling.
Modentic Industrial Corp. ISO 9001 Certified. Established in 1982, Modentic Industrial Corporation is involved in the world of stainless steel valves & fittings selling. Contents A view of valve process
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationGate Valve (Model 1000)
Gate Valve (Model 1000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationDuo-Chek II High Performance Check Valves
Duo-hek II High Performance heck s Duo-hek II s Duo-hek II - The High Performance heck Duo-hek II high performance check valve is the original Mission wafer check valve introduced to the market in the
More informationNorflow Controls Industrial Valves
MATERIAL OF CONSTRUCTION FOR PRESSURE CONTAINING PARTS FOR TRIM MATERIAL Carbon Steel Forged A-105 13% Cr. Steel A-217 Gr. CA15 Carbon Steel Cast A-216 Gr. WCB, WCC AISI 10 0.15% Moly Steel Cast A-217
More informationPARCOL SERIES CONTROL VALVES
PAROL -9 SERIES ONTROL VALVES PAROL -9 SERIES ONTROL VALVES The line of PAROL -9 series control valves provides the most versatile globe body type single seat available with heavy top guiding design.
More informationASME Classes /2 24 ( mm) Class /2 1 1 /2 (15 40 mm)
ASME Classes 150 300 1 /2 24 (15 600 mm) Class 800 1 /2 1 1 /2 (15 40 mm) PROFILE Velan is one of the world's leading manufacturers of industrial valves, supplying forged and cast steel gate, globe, check,
More informationVF-73 SERIES Centric Butterfly Valves
VF-73 SERIES entric utterfly Valves VALUE VALVES VALUE VALVES VF-7 SERIES PRODUT HARATERISTIS With 35 years of experience in the industry, extensive reference lists in all industrial sectors and continued
More informationFloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required.
FloCheck is a precision engineered, twin plate check valve suitable for product or service lines, wherever non-return protection is required. Features Twin plate, flat seat design for enhanced sealing.
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 462 Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 461.16-E Available designs 40 18 Cap H2 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring
More informationCheck Valve (Model 6000)
Check Valve (Model 6000) s: - 2 to 24 (50mm to 600mm) Rating: - Class 150 to Class 2500 Cast Steel Valves Flange End But-Weld End Information:- www.invacovalves.com sandesh@invacovalves.com invacovalves@gmail.com
More informationType 459. Type 459. Available designs. Cap H2. with bushing 19. Lock nut. Bonnet. Outlet flange 2.4 Outlet adaptor 2.1. spacer.
Available designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring plate 14 Split ring 60 Gasket 8 Guide 57 Pin 61 Ball 7 Disc 2 Outlet body
More informationForged Steel Valves Comparison Chart 1. Standard material Specification 2. Figure Number 3. Gate Valves 4-5. Globe Valves 6-7. Y-Globe Valves 8-9
INDEX Forged Steel Valves Comparison Chart 1 Standard material Specification 2 Figure Number 3 Threaded, Socket Welded & Butt Welded Ends Gate Valves 4-5 Globe Valves 6-7 Y-Globe Valves 8-9 Check Valves
More informationWafer, Semi Lug, Lug and Flanged Type
Year : Wafer, Semi Lug, Lug and Flanged Type Page 1 Year : Specification Description : GVC concentric rubber lined butterfly valves suitable for bi-directional flow and bubble tight shut-off at full rated
More informationThe bolted bonnet configuration achieves simultaneously the best performance and the highest safety.
The achieves simultaneously the best performance and the highest safety. Features A rugged body and bonnet design in accordance with API 600, ASME B16.34 and BS 1414. Tight shutoff performance is always
More informationCentered Rubber Seated Valves DS Series
Centered Rubber Seated Valves DS Series The Power to Perform. Orton is part of Truflo International plc, a leading supplier of specialist flow control products, with a presence on each continent. Orton
More informationButterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)
Butterfly Valve Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300) Sizes: - 2 to 120 (50mm to 3000mm) Rating: - Class 150 & PN16 Wafer Type Lug Type Flanged End Information:- www.invacovalves.com
More informationSafety Relief Valves Commanche Techmatic Controls
Safety Relief Valves Commanche Techmatic Controls Product description Material Properties Connection W. Pres (Bar) W. Temp ( ) 1. Commanche-317 ISO 9001 (DN 12-50) SV-B27 Bronze Without lever Threaded
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationarflu globe valves The quality you can trust Globe valves Because of their configuration,
The quality you can trust globe valves 2 18 Globe valves Because of their configuration, globe valves are perfect to regulate or limit the fluid port. epending on the needs of the system, design or open
More informationThe Fast-track. valves. manufacturer for valves
The Fast-track valves manufacturer for valves Introduction The valves are intended for a wide range of applications, such as oil and gas, chemical, petrochemical, energy and process industry. BSM Valves
More informationType 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com
Type 441 Flanged Safety Relief Valves CATALOG The-Safety-Valve.com General Information LESER India Safety Relief Valves The safety valve Type 441 represents High capacity related to the safety valve size
More informationShort Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Short) Series 120. Document : S120 Revision : 2 Year : 2014
Year : Short Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
More informationAVK (WWE) BUTTERFLY VALVE DN 50 to DN (EVTLS)
Flangeless tapped lug Wafer Type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16, 25 DESIGN Body Flangeless tapped lug wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 /
More informationCheck Valves Working on the Basis of Quality and Trust
www.duocheck.co.kr Check Valves Working on the Basis of Quality and Trust Working on the Basis of Quality and Trust GREETINGS Dear valued customers, Soosung Valve Industry Co., Ltd. (SSV) was founded in
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationVALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
More informationDesign & Technology in Valves
Design & Technology in Valves Ibor has been involved in many large international projects with the world s leading EPC Company overview Ibor manufacture Ball valves, Butterfly valves, Gate Valves, Check
More informationWENZHOU BAIJI VALVE CO.,LTD
API valves Cataloge 2006 All rights reserved by Wenzhou Baiji Valve Co.,Ltd CN. API 600 CAST STEEL VALVES COMPANY INTRODUCTION Wenzhou Baiji Valve Co.,LTD. BJ VALVES, is a diversified global supplier of
More informationLong Face to Face. Bonded Liner Butterfly Valve Mono Flanged Type (Long) Series 130. Document : S130 Revision : 3 Year : 2014
Year : Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical Data Description
More informationMono Flanged Type Long Face to Face
Year : Mono Flanged Type Long Face to Face Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Technical
More informationbutterfly valves high performance TRIPLE OFFSET HP-TRI REV0
high performance EXECUTION 1st OFFSET 2nd OFFSET 3rd OFFSET The BELVEN-TRI series incorporate triple offset disc configuration. With this configuration the disc seal makes contact with body seat, only
More informationRESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com
RESILIENT SEATED BUTTERFLY VALVES Howell Valve & Automation Toll Free: 1-888-469-3557 Howellvalve.com TABLE OF CONTENTS Description Page Index 2 Resilient Standard Features 3 ST Boot Series with BUNA-N
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationForged 3 Piece Trunnion Mounted Ball Valves Series MS
Forged 3 Piece Trunnion Mounted Ball Valves Series MS Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Metal Seated Chrome carbide and tungsten carbide trims Uni-directional
More informationDual Plate Check Valves
ORION STEEL VALVES Dual Plate Check Valves API 594 DUAL PLATE DUAL PLATE WAFER CHECK VALVES API 594 - p. 84 Class ASME 150 (PN 20) 300 (PN 50) 600 (PN 100) 900 (PN 150) 1500 (PN 250) 2500 (PN 420) DUAL
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas
- International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.
More informationSTANDARDS and SPECIFICATIONS
ANSI (American National Standards Institute) ANSI B31.4 - Liquid petroleum transportation piping system. ANSI B31.4 - Gas transmission and distribution piping system. API (American Petroleum Institute)
More informationL&T VALVES BUSINESS GROUP A
Larsen & Toubro Limited (L&T) is a US $ 5 billion engineering and construction company, with a strong presence in manufacturing, services and Information Technology. L&T was founded in 1938 by two Danish
More informationVANESSA SERIES 30,000 TRIPLE OFFSET VALVES* BASIC CONFIGURATION
* BASIC CONFIGURATION With a robust integral-to-body valve seat and optimized seating angles, this valve is capable of handling isolation and process control through multiple functionalities FEATURES GENERAL
More informationLow temperature and cryogenic valve solutions. Fast track delivery. Special materials. Special design
> Upstream > Midstream > Downstream > Chemical valve applications Fast track delivery Special materials Special design Low temperature and cryogenic valve solutions Your reliable valve partner Red Point
More informationHELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
More informationKTM. Enhanced, proven design offers both control and block valve functions
KTM Enhanced, proven design offers both control and block valve functions Features Unique dual-v ball features a secondary (Small) V-notch allowing extremely small, accurate flow rates The primary (Large)
More informationD1 Series Top Guided Single Seated Control Valves
D1 Series Top Guided Single Seated Control Valves Model D1S Overview Model D1S globe control valves are with bolted bonnet and top guided contoured trims. The design facilitates easy access to internal
More informationGasket
CAST STAINLESS STEEL GATE VALVES API 603 INTEGRAL SEAT, 1 2 1 1 2", (15 40 mm) CLASS 800 GATE VALVES FULL PORT 1 2 1 1 2", (15 40 mm) THREAE OR SOCKET WEL, ASME CLASS 800 Precision High Quality Investment
More informationBonded Liner Butterfly Valve Double Flanged Type Series 150
Year : Page 1 Provided data is not contractual, data may be changed without notice. All rights reserved Global Valve enter b.v. Year : General Product Information Design Technical Data Description : GV
More informationHD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
More informationPRIMARY VALVE STANDARDS
ADELAIDE BRISBANE PERTH PRIMARY VALVE STANDARDS MAJOR VALVE STANDARDS PETROCHEMICAL AND REFINING INDUSTRY API 600 Steel Valves - Flanged & Buttwelding Ends API 600 is the main steel gate valve specification.
More informationSPIRAL WOUND GASKETS (SWG)
SM01 SWG without guide or inner ring This style of gasket is mainly used for male and female flanges or projection and recess flanges and used in load-bearing flange configurations, such as tongue and
More informationSpring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure
Series Thermal Relief Safety Valves Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure Applications The Sempell series provides a complete and comprehensive range
More informationDouble door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems.
Double door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems. Features Light weight, versatile design, 80 to 90% lighter than conventional full-body check valves.
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationAxial. Axial SMART IN FLOW CONTROL
1 COMPANY OVERVIEW Ringo Válvulas (RV) is located in the industrial city of Zaragoza, Spain. Since its establishment RV has designed and manufactured its own cast and forged valves. Our experience of over
More informationHOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
More informationInternational Standard Valve, Inc. Slab and Expanding Gate Valves
International Standard Valve, Inc. TM ISV Series GTDS & GTDE Slab and Expanding Gate Valves 2 through 36 ASME Class 150-2500 Top Entry Bolted Body Flanged & Weld Ends API 6D Fire Safe Design NACE is a
More informationSeries 30,000 Rotary Process Valve. Technical data API 609, DIN 3840.
Series 30,000 Rotary Process Valve The outstanding performance of triple offset, metal seated Vanessa Series 30,000 valve is the ideal solution to achieve perfect shutoff in any process. Features Torque
More informationCorporate Overview... 2,3. How To Order Gate Valves Globe Valves Check Valves Cryogenic Valves...
FORGED STEEL VALVES Table Of Contents Corporate Overview... 2,3 How To Order... 4-8 Gate Valves... 9-14 Globe Valves... 15-22 Check Valves... 23-30 Cryogenic Valves... 31-40 Integral Flanged Valves...
More informationBUTTERFLY VALVE VF-7 Series
BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm
More informationSeries 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
More informationItem Component Remarks Type 4393 Type ), SA Vulcanized soft seal disc SA L SA L
Available designs materials Materials Item Component Remarks 3 4 1 Base / Inlet body 2 Outlet body Threaded connection Flange connection 2.1 Outlet adaptor Flange connection 2.4 Outlet flange Flange connection
More informationCrane. UNI-CHEK High Performance Check Valves
Crane UNI-CHEK High Performance Check Valves High Performance Uni-Chek Valves for Backflow Prevention In almost every piping system, there is a need for backflow prevention. Most piping systems utilize
More informationVogt Valves Catalog and Application Manual VVENCT
Vogt Valves Catalog and Application Manual VVENCT0000-06 Experience In In Motion Motion Vogt Valves, Sulphur Springs, TX Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early
More informationFittings. Valves. Actuators
Fittings Valves Actuators Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End
More informationP R O D U C T R A N G E
PRODUCT RANGE OVERVIEW Range of Materials AUSTRALIAN PIPELINE VALVE BRAND Australian Pipeline Valve (APV) manufactures a complete Cast iron, Ductile iron (GGG40) range of ASME, API, BS and AS valves such
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationF-17 CATALOG. Forged Steel Valves
F-17 CATALOG Forged Steel Valves Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early development of ammonia absorption refrigeration systems that made artificial ice. This business,
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationOUR ASSETS OUR SCOPE OF SUPPLY. Ball Valves Gate Valves Globe Valves Control Valves Check Valves Butterfly Valves Plug Valves Special Valves
Driving Energy Since its establishment, Ringo Válvulas has designed and manufactured its own cast and forged valves. Our experience over 30 years on the valve industry is the key of our success and recognition,
More informationGA-1601B (EN) GATE VALVE
GA101B (EN) GATE VALVE ABOUT US FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and
More informationValves 101. Gobind Khiani, P.Eng, Fluor Canada Ltd Fluor. All Rights Reserved.
Valves 101 Gobind Khiani, P.Eng, Fluor Canada Ltd. 2014 Disclaimer The contents of this presentation are intended for educational purposes only and do not replace independent professional judgment. They
More informationKOMOTO VALVES & CONTROLS PRODUCT GUIDE KOREA MOTOYAMA INC.
KOMOTO VALVES & CONTROLS PRODUCT GUIDE KOREA MOTOYAMA INC. Safe & Reliable Operation, Perfect Performance, Professional Technical Support, Easy Maintenance, Interchangeable Parts, Long Life Korea Motoyama
More informationType 459. Type. 459 Safety Relief Valves spring loaded
Type Plain lever H3 459 Safety Relief Valves spring loaded Contents Chapter/Page Cap H2 Materials Available designs 05/02 Available designs materials 05/03 How to order Numbering system 05/04 Article numbers
More informationBolted bonnet configuration
The bolted bonnet type valves are manufactured to guarantee the highest performance in the widest spectrum of oil and gas applications Features Swing check valves can fit on both horizontal and vertical
More information9500 Series Fully Welded Valve Metal to Metal or Soft Seated Ball Valves
STANDARDS API 6D certified ASME / ANSI B26.10 ASME B16.34, NACE NACE MR 0175 compliance API 6FA Double block and bleed Double piston effect available 9500 Series Fully Welded Valve Metal to Metal or Soft
More informationType. Facts. Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric + US Units
Type 459 Safety Relief Valves spring loaded Metric + US Units Facts The-Safety-Valve.com Designs 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 9 Bonnet 16 Spring plate 54 Spring 12 Spindle 17 Spring
More informationControl Valves for General Applications
Control Valves for General Applications 2 CCI s 8G/8H delivers superior control performance and reliability. The series 8 cage-guided valve is specially designed using recent advancements in control valve
More informationSEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5
SEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5 PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de BELLOWS SEALED
More information