Art.918C Pre-assembled manifold with flow meters, air
|
|
- Adrian Gilbert
- 5 years ago
- Views:
Transcription
1 TECHNICAL CATALOGUE Art.98C Pre-assembled manifold with flow meters, air vent valves and drain cock
2
3 TEC ITAP SpA, founded in Lumezzane (Brescia) in 97, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing and heating systems. Thanks to fully automated production processes, with 6 tooling machines and assembly lines, we are able to produce, pieces per day. Our innate pursuit for innovation and observance of technical regulations in force is supported by the company certification ISO 9: 8. The company has always considered its focus on quality as the main tool to obtaining significant business results: today ITAP SpA is proud to offer products bearing the approval of numerous international certifying bodies. THE COMPANY
4 COLLETTORE PREMONTATO IN ACCIAIO INOX
5 TEC STAINLESS STEEL aisi L High resistance to corrosion Extreme lightness High flow rate levels Can be used in low and high temperature systems High mechanical strength Absence of internal stresses due to cold processing (no stress corrosion cracking). Metallic continuity with the other components, in the event of next generation radiating systems (absence of electrolytic corrosion). Up to % lighter than a brass manifold of the same size. Up to % higher compared to compact manifolds made of composite material. Up to % higher compared to brass manifolds. Suitable for underfloor radiant heating systems and radiator systems. AISI L steel features a tensile strength of N/mm while CW6N brass (used for manifolds) features a tensile strength of N/mm. STAINLESS STEEL aisi L
6 PRE-ASSEMBLED STAINLESS STEEL MANIFOLD
7 TEC The distribution manifold is supplied with flow meters, necessary to adjust the flow rate through each circuit and cut-off valves, suitable for electric actuators The distribution manifold is made of AISI L stainless steel and it is suitable for underfloor heating systems. Thanks to Topmeter flow meters, installed on the flow manifold, it is possible to adjust the flow rate of each circuit. In order to reach the best thermal comfort in each room, it is also possible to fit up electric actuators, directly on cut-off valves installed on the return manifold. Thanks to the new adjustable end piece equipped with drain cock and air vent valve, the filling of the system will be very easy to do. Furthermore, thanks to a couple of air vent valves, it will be allowed to avoid any airhole inside the heating system. ART.98C
8 98C Pre-assembled manifold with flow meters, air vent valves and drain cock SIZE PRESSURE CODE PACKING x/ x 6bar/87psi 98C / x/ x 6bar/87psi 98C / x/ x 6bar/87psi 98C / x/ x6 6bar/87psi 986C / x/ x7 6bar/87psi 987C / x/ x8 6bar/87psi 988C / x/ x9 6bar/87psi 989C / x/ x 6bar/87psi 98C / x/ x 6bar/87psi 98C / x/ x 6bar/87psi 98C / x/ x 6bar/87psi 98C / technical SPECIFICATIONS Consisting of: - return manifold in stainless steel AISI L with shut-off valves preset for electrothermal actuators - flow manifold in stainless steel AISI L with flow meters - adjustable end pieces with drain valve and manual air vent valve - complete metal brackets Available on demand with deeper mounting brackets art. 98ST without extra-charge. PRE-ASSEMBLED STAINLESS STEEL MANIFOLD Materials Available size: Maximum working pressure: 6 bar ( bar for installation test) Maximum working temperature: 7 C Threads: ISO 8 (equivalent to DIN EN ISO 8 and BS EN ISO 8) Outlets: from to, / Eurokonus Outlet centre distance: mm. In case of use of electric actuators Art. 89M, it is suggested to use the off-centre by-pass kit Art. 86BY. ATTENTION: manifolds will be supplied mounted on the brackets; accessories will be supplied separately, inside the same box. pos. description N. material Mounting brackets Steel P Manual air vent group Nickel-plated brass CW67N Single manifold with flow-meters Stainless steel AISI L Single manifold with shut-off valves Stainless steel AISI L
9 OVERALL DIMENSIONS 96 TEC 6, B A x / A B Certifications ART.98C
10 POSITIONING THE STAINLESS STEEL MANIFOLDS INTO METAL BOXES COLLETTORE PREMONTATO IN ACCIAIO INOX CODE LxH (mm) x6 6x6 7x6 8x6 x6 N outlet MANIFOLD L
11 ACCESSORIES CHART PRE-ASSEMBLED STAINLESS STEEL MANIFOLDS TEC POS ART DESCRIPTION 86BY Off-centre by-pass kit AR Adjustable end piece with drain valve and automatic air vent valve 9 Male end cap 98ST Mountin brackets in steel for metal boxes 86 Stainless steel manifold 6 8 Male/male adapter 7 7 Adapter fotr flow meters - 8 Vitonde Lockshield 9 7FL Flow meter Vitonvat Convertible control spindle 89CP Protection cap 89VM Handle 89M Electrothermal actuator Electric actuator for zone ball valves - Electric actuator for -way zone ball valves Electric actuator for zone ball valves way zone ball valve By-pass kit for zone valves 8 9BC Thermometer union complete with themometer 9 9 Ball valve, T handle 98SDC Ball valve for manifolds without union 98SDC Angle ball valve for manifolds without union 98 Ball valve for manifolds 98 Angle ball valve for manifolds 98S Ball valve for manifolds with o-ring on the union 98S Angle ball valve for manifolds with o-ring on the union Instructions
12 Flowmeter adjustment How to handle the flowmeter a How to adjust the flow rate r A B click! r I r.8 mm = OPEN a. mm = CLOSE r l/min x x =.mm CLOSE x =.8mm OPEN r A B click! PRE-ASSEMBLED STAINLESS STEEL MANIFOLD Installation of electrothermal actuator Electrothermal actuator Art. 89M: - Normally closed, on-off operation. - Power supply voltage: V. - Power consumption: W. - Minimum and maximum working ambient temperatures: C, 6 C. - Maximum differential pressure:,bar. - Length of the power supply cable: m.. - Class of protection IP. - Available with cables or cables with an auxiliary microswitch. - Capacity of the auxiliary connection: ma. - CE marked.
13 diagrams Diagram of flow meter fully open (flow manifold) Below are the flow rate / pressure drop diagrams relative to pre-assembled manifolds with main connections. TEC Pressure drop [kpa] Flow rate [l/h] Kv =, m /h Cut-off valve (return manifold) Pressure drop [kpa] Flow rate [l/h] Kv =,6 m /h Instructions
14 PRE-ASSEMBLED STAINLESS STEEL MANIFOLD
15 notes TEC We reserve the right to make improvements and changes to the products described herein and to the relative technical data, at any time and without forewarning.
16 ITAP S.p.A. Via Ruca 9 6 Lumezzane Brescia (ITALIA) Tel 897 Fax /
TECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS
TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing
More informationTECHNICAL CATALOGUE WASHING MACHINE VALVES
TECHNICAL CATALOGUE WASHING MACHINE VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationTECHNICAL CATALOGUE. ThermometerS and pressure gauges
TECHNICAL CATALOGUE ThermometerS and pressure gauges TEC ITAP SpA, founded in Lumezzane (Brescia) in 197, is currently one of the leading production companies in Italy of valves, fittings and brass distribution
More informationTECHNICAL CATALOGUE AIR VENT VALVES AND SAFETY VALVES
TECHNICAL CATALOGUE AIR VENT VALVES AND SAFETY VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution
More informationTECHNICAL CATALOGUE AUTOMATIC AIR-VENT VALVES
TECHNICAL CATALOGUE AIR-VENT VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationTECHNICAL CATALOGUE BALL VALVES: PARIS
TECHNICAL CATALOGUE BALL VALVES: PARIS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationTECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: VIENNA TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationTECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: VIENNA TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationTECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationsavings flexibility recyclable LIGHTNESS FULL FLOW MECHANICAL STRENGTH IMPROVE CONTROL TECHNICAL BROCHURE aesthetic performance CHANGE
TECHNICAL BROCHURE aesthetic performance flexibility thermal comfort PREMIUM QUALITY MECHANICAL STRENGTH IMPROVE CHANGE LIGHTNESS savings high resistance to corrosion low and high temperature systems FULL
More informationTECHNICAL CATALOGUE. Electrothermal actuator
TECHNICAL CATALOGUE Electrothermal TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationTECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationTECHNICAL CATALOGUE GAS BALL VALVES: BERLIN
TECHNICAL CATALOGUE GAS BALL VALVES: BERLIN TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationTECHNICAL CATALOGUE EUROPA CHECK AND FOOT VALVES
TECHNICAL CATALOGUE EUROPA CHECK AND FOOT VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution
More informationTECHNICAL CATALOGUE BLOCK CHECK AND FOOT VALVES
TECHNICAL CATALOGUE BLOCK CHECK AND FOOT VALVES TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution
More informationTECHNICAL CATALOGUE BUILD-IN VALVES AND SUPPLY STOPS
TECHNICL CTLOGUE BUILD-IN VLVES ND SUPPLY STOPS TEC ITP Sp, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationSTAINLESS STEEL MANIFOLDS FOR RADIANT SYSTEMS CREATION AND DIFFUSION OF THE STAINLESS STEEL MANIFOLD USE DIAGRAMS OF STAINLESS STEEL MANIFOLDS
STAINLESS STEEL MANIFOLDS FOR RADIANT SYSTEMS CREATION AND DIFFUSION OF THE STAINLESS STEEL MANIFOLD USE DIAGRAMS OF STAINLESS STEEL MANIFOLDS www.itap.it CREATION AND DIFFUSION OF THE STAINLESS STEEL
More informationCALEFFI. Distribution manifold for radiant panel systems. 664 series 01260/18 GB. replaces 01260/14 GB
Distribution manifold for radiant panel systems 664 series FM 21654 003 CALEFFI 01260/18 GB replaces 01260/14 GB Function The distribution manifold for radiant panel systems is used to optimally distribute
More informationCALEFFI. Distribution manifold for radiant panel systems. 664 series 01260/14 GB
Distribution manifold for radiant panel systems 664 series ACCREDITED CALEFFI 01260/14 GB ISO 9001 FM 21654 ISO 9001 No. 0003 Function The distribution manifold for radiant panel systems is used to optimally
More informationCT3202.0_01 EN February 2018
UNDERFLOOR HEATING / RADIATOR HEATING COMPACT BRASS MODULAR MANIFOLDS (centre distance 37 mm) CT3202.0_01 EN February 2018 o o o Super compact: e.g. 11 ways (version code 3211.06.10) in just 60 cm; Insertion
More informationPreassembled manifolds with flow meter, series CPRFL
Preassembled manifolds with flow meter, series CPRFL Main features - Available in the versions with : Head connections DN./4 F Side outlet connections /4 M Centre distance between the outlet connections
More informationTECHNICAL CATALOGUE BALL VALVES: VIENNA
TECHNICAL CATALOGUE BALL VALVES: STANDARD LOW BALL VALVES: Suitable for domestic water ServiceS, heating, airconditioning plants and compressed air SyStemS. BALL VALVES 116 BALL VALVE, STANDARD LOW size
More informationCALEFFI. Pre-assembled distribution manifolds for. heating and air-conditioning systems. 663 series 01065/18 GB. replaces dp 01065/06 GB.
Pre-assembled distribution manifolds for heating and air-conditioning systems 663 series FM 21654 003 065/18 GB replaces dp 065/06 GB Function The pre-assembled distribution manifolds are designed to optimise
More informationCALEFFI. Composite manifolds specifically designed for radiant panel systems. 670 series 01126/18 GB. replaces dp 01126/11 GB.
Composite manifolds specifically designed for radiant panel systems 670 series FM 165 00 CALEFFI 0116/18 GB replaces dp 0116/11 GB Function Composite manifolds are used to control and distribute the medium
More informationCALEFFI. Manifolds in composite specifically designed for radiant panel systems. 670 series 01126/05 GB. Function
Manifolds in composite specifically designed for radiant panel systems 670 series cert. n 000 ISO 900 CALEFFI 06/05 GB Function Manifolds in composite are used to control and distribute the fluid in the
More informationCALEFFI. Pre-assembled distribution manifold for radiant panel systems S1 series 01144/11 GB. Replaces 01144/07 GB.
Pre-assembled distribution manifold for radiant panel systems 668...S series ACCREDITED ISO 900 FM 65 ISO 900 No. 000 0/ GB Replaces 0/07 GB Function The distribution manifold for radiant panel systems
More informationFan-coil valves Series
Fan-coil valves Series 11-11 - 411 Main features Complete range in the following versions : -way - DN: 1/, /4, 1 -way - DN: 1/, /4, 1 -way with 4 ports - DN: 1/, /4 - The -way version and the -way versions
More informationWAY MOTORISED COMPACT ZONE VALVES
2-3 - 4 WAY MOTORISED COMPACT ZONE VALVES CT0736.0_03 EN May 2015 ZONE 2C ZONE 4C ZONE 3C o o o Reduced overall dimensions; Extremely quiet operation; Valve with union connections. PRODUCTION RANGE Valve
More informationCOMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS 2012 2 The CALEFFI SOLAR product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
More informationCALEFFI. Modulating temperature regulating unit with distribution kit for primary circuit. 171 series 01153/15 GB. replaces 01153/07 GB
ACCREDITED Modulating temperature regulating unit with distribution kit for primary circuit 7 series ISO 9 FM 6 / GB replaces /7 GB Function The temperature regulating unit with the distribution kit for
More informationThermostatically controllable valves art. VD/VS/VCR/VCD/VCS xxxx
Thermostatically controllable valves art. VD/VS/VCR/VCD/VCS xxxx Thermostatically controllable valves have the purpose to cut-off, throttle and regulate flow rate through the heating body, since they are
More informationFCU Floor Control Unit
Fully assembled with integrated M3V Control Group including mixing valve and circulating pump and in-line high and low temperature Topway T2 FM manifold options with high and low temperature manifold options
More informationDynacon. Floor Heating Manifolds Floor heating manifold with automatic flow control
Dynacon Automatic Flow Control Floor Heating Manifolds Floor heating manifold with automatic flow control IMI HEIMEIER / Floor Heating Control / Dynacon Dynacon Dynacon adjusts the flow rate in the individual
More informationLK Manifold Shunt VS2
LK Manifold Shunt VS2 Design LK Manifold Shunt VS2 is a shunt unit with a two way control valve used in systems with a primary pump. The shunt unit is mountable from both the left and right of LK Manifolds.
More informationdynacon floor heating manifold with automatic flow control
dynacon floor heating manifold with automatic flow control Pressurisation & Water Quality Balancing & Control Thermostatic Control EnGInEERInG advantage Dynacon Description HEIMEIER Dynacon floor heating
More informationTechnical information Thermostatic radiator valves
The Oventrop Quality Management System is certified to DIN-EN-ISO 900 Technical information Thermostatic radiator valves Function: Oventrop thermostatic radiator valves are proportional regulators working
More informationCALEFFI. Motorised ball zone valves with 3-contact control BY series 01131/18 GB. replaces 01131/11 GB
otorised ball zone valves with -contact control -.. BY - series 00 0/ GB replaces 0/ GB unction The motorised zone valves permit automatically shutting off the medium in air conditioning or hydraulic and
More informationSINGLE MANIFOLDS TECHNICAL DATA SHEET10/ ENG
FUNCTION ICMA distribution manifolds are manufactured starting from a special profile of brass bar drawn into CW617-N. They can be divided into: Distribution manifolds with or without connection fittings
More informationFloor heating manifold with automatic flow control
dynacon Floor heating manifold with automatic flow control Pressurisation & Water Quality Balancing & Control Thermostatic Control EnGInEERInG advantage dynacon adjusts the flow rate in the individual
More informationSection 20. HVAC Valves & Products
Section 20 HVAC Valves & Products 0800 276 877 281 Herz Radiator Valves Type DR-T-90 Radiator Control valves with Pre-setting Function. Suitable for Conversion to Thermostatic Operation. Nickel Plated
More informationCOMPONENTS FOR SOLAR THERMAL SYSTEMS
COMPONENTS FOR SOLAR THERMAL SYSTEMS The Caleffi Solar product range has been specially developed for use in solar thermal systems, where high temperatures can normally be reached and where, depending
More informationComponents for central heating
01 01 Components for central heating Booster units and spare parts 18 Hydraulic separator and spare parts 21 Dirt separators - Deaerators 23 By-Pass differential valve - Air separator units 32 Filling
More informationT2 Wall Hung Radiator & UFH Manifolds
T Wall Hung Radiator & UFH Manifolds T Topway LS Pre-Assembled Heating Manifold A range of nickel plated extruded brass manifolds pre-assembled for immediate installation for both radiator and underfloor
More informationCALEFFI. Direct supply unit for heating systems. 165 series 01237/17 GB. replaces dp 01237/15 GB. Function
Direct supply unit for heating systems 65 series ACCREDITED ISO 9 FM 65 CALEFFI 7/7 GB replaces dp 7/5 GB Function The direct supply unit performs the function of supplying the heating system circuits
More informationThe valves can be controlled electronically by thermal actuators or act as self-acting units by means of remote temperature adjusters.
Floor Heating Manifold FHF Application The Manifold FHF is used for controlling water flow in under floor heating systems. Each tube of the floor heating system is connected to the manifold, thus making
More informationHeating Manifold Systems
Bathroom thermostat and remote sensor Engineered Water Solutions Product Focus Topway T2 Manifolds T3 Controller Control T EWC-1 Wiring Box Zone Controls Alpert UFH Pipe Heating Manifold Systems High Temperature
More informationPreassembled fixed-point control, distribution and pumping unit for radiant panel heating systems DOMORADIANT Series
95-0055-UK-Rev1.qxd 4-09-2007 10:31 Pagina 1 Preassembled fixed-point control, distribution and pumping unit for radiant panel heating systems DOMORADIANT Series Main features DOMORADIANT, is a preassembled
More informationApplication technology, 5th edition. Volume III: Fonterra radiant heating and cooling
Application technology, 5th edition Volume III: Fonterra radiant heating and cooling Regulation components, manifolds and manifold cabinets Regulation components, manifolds and manifold cabinets System
More informationPressure Independent Control Valve
Pressure Independent Control Valve Rev. 4.0-06/06/2011 Technical manual Introduction The Pressure Independent Control Valve PICV is a combined constant flow limiter and full stroke, full authority equal
More informationT2 Wall Hung Radiator & UFH Manifolds
T Wall Hung Radiator & UFH Manifolds T Topway LS Pre-Assembled Heating Manifold A range of nickel plated extruded brass manifolds pre-assembled for immediate installation for both radiator and underfloor
More informationCALEFFI. Pre-assembled distribution manifolds for radiant panel systems. series 663 & /05 NA. Function
Pre-assembled distribution manifolds for radiant panel systems series & / NA Function Distribution manifolds for radiant panel systems are used to optimally distribute the heating fluid in floor heating
More information80% Max working pressure: Max working temperature: 70 C. Flow-meter regulation range: Flow meter-regulation range: ± 10%
Luxor s distribution manifolds are from brass bar CW617N. The manifolds are tooled and produced with fully automated machineries and tested when complete with their accessories to guarantee their absolute
More informationPre-assembled distribution manifolds for radiant panel systems
Pre-assembled distribution manifolds for radiant panel systems Function Distribution manifolds for radiant panel systems are used to optimally distribute the heating fluid in floor heating system circuits
More informationBallorex Vario. Description. Versions. Benefits. Applications. Balancing
Ballorex Vario Description Ballorex Vario is a variable orifice double regulating valve for balancing water-based heating and cooling systems. The balancing performed ensures the required distribution
More informationProducts for underfloor heating
ENG Products for underfloor heating Hydronic Solutions 1 Table of Contents LK 420 Minishunt... 3 LK 421 Manifold Shunt... 4 LK 422 Manifold Shunt... 5 Spare Parts and Accessories... 6 LK 430 Manifold...
More informationunderfloor heating PRODUCTS FOR UNDERFLOOR HEATING
underfloor heating PRODUCTS FOR UNDERFLOOR HEATING Table of Contents LK 420 Minishunt... 3 LK 421 Manifold Shunt... 4 LK 422 Manifold Shunt... 5 Spare Parts and Accessories... 6 LK 430 Manifold... 7 LK
More informationENERGIE DI GRUPPO ENERGIES OF A GROUP
ENERGIE DI GRUPPO ENERGIES OF A GROUP Only excellence allows to compete in the international market. The challenge can be faced thanks the passion and the energy of the researchers, who plans and manufactures
More informationTechnote. Frese OPTIMIZER - pressure independent 4-pipe coil control unit. Application. Benefits. Features.
Page of 7 Application control unit, in conjunction with the associated hydraulic set provides a complete pressure independent balancing and control group for efficient and effective individual room or
More informationFO-BV Series. Fixed-orifice balancing and control valves. Technical Data Sheet. WattsIndustries.com
FO-BV Series Fixed-orifice balancing and control valves Technical Data Sheet WattsIndustries.com Description FO-BV Series fixed-orifice threaded valves are designed for flow control and monitoring in climate
More informationMANIFOLDS AND DISTRIBUTION EQUIPMENT
MANIFOLDS AND DISTRIBUTION EQUIPMENT - Radiators distribution equipment... 52 - Components for radiators... 57 - Underfloor heating/cooling distribution equipment... 58 - Modular manifolds... 60 - Components
More informationConfigurations: s.64. s.31. s.74 3 way. Flow: Mini 2 way Direct mount. Flow: Full. Flow: Standard 3 way. ISO 5211 F03 Flange
RUBINETTERIE UTENSILERIE BONOMI MEETING STANDARDS IS OUR STANDARD Configurations: 1 2 3 s.31 s.64 s.74 3 way Flow: Mini 2 way Direct mount Flow: Full 2 way ISO 5211 F03 Flange Flow: Standard 3 way ISO
More informationPRE-ASSEMBLED MANIFOLD KIT 1 TECHNICAL DATA SHEET 10/ ENG
FUNCTION The pre-assembled ICMA collector kits have the function of optimizing the distribution of heat transfer fluid to floor heating systems in order to improve the control of the thermal emission in
More informationThermostatic radiator valves with presetting
Thermostatic radiator valves TRV-2, TRV-2S Thermostatic radiator valves with presetting Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING AVANTAGE Thermostatic radiator
More informationCALEFFI. Ball shut-off valve fitted for integrated flow rate measuring sensor. 111 series 01234/13 GB. (kpa) (mm w.g.) G (m 3 /h)
Ball shut-off valve fitted for integrated flow rate measuring sensor series ACCREDITED CALEFFI 034/3 GB ISO 900 FM 654 ISO 900 No. 0003 Function The valve allows to shut the circuit off and is fitted for
More informationVG6000 Series Forged Brass Valves
VG6000 Series Forged Brass Valves Product Bulletin PB_VG6000 Issue Date 04 2008 The VG6000 forged brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller
More informationCHOOSING YOUR MANIFOLD & LOCATION
CHOOSING YOUR MANIFOLD & LOCATION THOUGHTS ON ZONING The function of a manifold is to distribute the correct flow to each loop to meet its specific heating load. This is achieved by balancing each loop
More informationTDU.3 floor distribution unit SK
SK General description and application The is intended for two pipe horizontal heating systems and includes connecting, measuring, regulating and distribution functions. The TDU.3 is easily installed on
More informationChangeOver6 and NovoCon ChangeOver6 - Motorized 6-port Ball Valves
- Motorized 6-port Ball Valves Description NovoCon The and NovoCon are 6-port motorized ball valves that performs a diverting function between two water circuits in 4-pipe changeover system. This diverting
More informationSSM Floor Heating Manifold
Application The manifold consists of a supply and return manifold. The supply manifold includes possibility for individual shut-off of each circuit on flowmeter or shut-off valve. The return manifold is
More informationFHF Floor Heating Manifold
Data Sheet Application Manifold with flowmeter Manifold without flowmeter The Manifold FHF is used for controlling water flow in under floor heating systems. Each tube of the floor heating system is connected
More informationTRIM, TRIM A, RADITRIM A, TRIM K, STK, TA Loop
TOUR & ANDERSSON AB QUALITY AND ENVIRONMENT SYSTEM Certification of Registration Number 2125 and 2125 M Certified by SP TRIM, TRIM A, RADITRIM A, 1-15-5 TRIM K, STK, TA Loop Return valves and measurement
More informationIsoTherm FlowGuards Mini Ball Valves Gauges Aquastats Unions
82 IsoTherm FlowGuards Mini Ball Valves Gauges Aquastats Unions 83 Adjustment knob (sets supply temperature) Mixing Valve 1 Male BSP Threads Mixing Point Supply Inlet from Boiler Temperature Gauge (indicates
More informationConfigurations: s.64. s.31. s.74 3 way RUBINETTERIE UTENSILERIE BONOMI. Flow: Mini 2 way Direct mount. Flow: Full 2 way
RUBINETTERIE UTENSILERIE BONOMI Configurations: 1 2 3 s.31 s.64 s.74 3 way Flow: Mini 2 way Direct mount Flow: Full 2 way ISO 5211 F03 Flange Flow: Standard 3 way ISO 5211 F03 Flange Mini up to 3/4 Full
More informationTechnote. Frese OPTIMA - Pressure independent control & balancing valve. Application. Features. Benefits.
Page 1 of 12 Application pressure independent control valve (PICV) is used in heating and cooling systems in applications with Fan Coil Units, Air Handling Units or other terminal unit applications. provides
More information2-position electric actuators with Ball valves VBZ ½...11/4
4 831.2 & VBZ ½...11/4 2-position electric actuators with Ball valves VBZ ½ 11/4 90 angle - Unidirectional rotation VBZ ½ 11/4 Electric rotary actuators for two-port ball valves Operating voltage AC 230
More informationLK Manifold Shunt VS 2-2,5
LK Manifold Shunt VS 2-2,5 Design LK Manifold Shunt VS (Variable Speed) is a water temperature control pack complete with two way control valve used in systems with a primary pump. The shunt unit is mountable
More informationRADIATOR VALVES / RADIATOR VALVES WITH PRESETTING
RAIATOR VAVES / RAIATOR VAVES WITH PRESETTING THERMOSTATIC RAIATOR VAVES WITH PRESETTING Thermostatic radiator valve primary for radiators in heating systems and secondary for small cooling terminals.
More informationCALEFFI. Motorised ball valve for central heating systems. 638 series 01196/18 GB. replaces dp 01196/12 GB
Motorised ball valve for central heating systems 638 series M 21654 003 LI 01196/18 G replaces dp 01196/12 G unction Motorised ball valves allows both automatic shut-off and diversion of the thermal medium
More informationshort name: 3WL.IG* technical product sheet created :57 1/6 3-way ball valve F/F PN 63 with pneumatic actuator hard anodized aluminum
with pneumatic actuator hard anodized aluminum technical product sheet short name: 3WL.IG* 3-way ball valve F/F PN 63 E-Box MV Port Modell G Kugel Bauart RE06 RE06 1 1 1/ 1/ 3/" 1 1/ 1 1/ 3/" 1 1/ 1 1/
More informationHERZ-Connect 4 / Compact Connect 4 & Commissioning Centres
www.herz.eu HERZ-Connect 4 / Compact Connect 4 & Commissioning Centres Simple and cost efficient methodes of thermal units control 1 Connect 4.indd 1 17.11.2015 10:31:20 HERZ- Connect 4 HERZ Connect-4
More informationMrPEX 1 ¼ Stainless Steel Manifold. Installation Guide
MrPEX 1 ¼ Stainless Steel Manifold Installation Guide Design MrPEX 1 ¼ Stainless Steel Manifold is made from high quality stainless steel, and is offered in 2 through 12 loop configurations. The manifold
More informationBallorex Venturi 3.1 Introduction
3.1 Introduction Venturi Fixed Orifice Double Regulating Valve (FODRV) DN 15-600 1/2-24 Venturi description The Venturi is a range of manual balancing valves used in water-based heating and cooling systems
More informationInspection boxes and accessories
06 Inspection boxes and accessories 06 Metal inspection boxes 159 TUTTO plastic inspection boxes 163 page METAL INSPECTION BOXES 16 Sheet steel boxes and compatible manifolds In order to make box selection
More informationHigh Capacity Valve Body, Type RA-G
Data Sheet The RA-G valves are fitted with a grey protective cap. This protective cap must not be used as a manual shut off device. A special manual shut off device is available (code no. 013G3300). Application
More informationProduct range Solex Technical data and dimensioning. 5 Years
Qualität made in Germany Product range Solex Technical data and dimensioning Quality made in Germany 5 Years Handwerkergarantie m anufacturer s warranty Product range Solex Dimensioning High-Flow system
More informationTechnote. Frese OPTIMA Compact DN10-DN50 - pressure independent balancing & control valve. Application. Features. Benefits.
Page of 5 Frese OPTIMA Compact DN-DN5 Application Frese OPTIMA Compact pressure independent balancing & control valve (PIBCV) is used in heating and cooling systems in applications with Fan Coil Units,
More informationGruppi idraulici e raccordi
Gruppi idraulici e raccordi Hydraulic groups and fittings something new in the air HYDRAULIC GROUPS AND FITTINGS english The range of valve groups and fittings developed by Innova covers all the main applications.
More informationthree-way mixing valve
three-way mixing valve with or without presetting, for heating and cooling systems. Pressurisation & Water Quality alancing & Control Thermostatic Control engineering avantage Three-way mixing valve, with
More informationPre-Fabricated Flushing Bypass Assembly for Plant Applications Hero Plant DN15-150
Pre-Fabricated Flushing Bypass Assembly for Plant Applications Description Hero Plant is a pre-fabricated, flushing bypass arrangement for balance, control, isolation, and operation of plant devices. Flow
More informationFOR HEATING & PLUMBING SYSTEMS
Quality Plastics Ltd. Pushfit Option Compression Option MANIFOLD SYSTEM ADVANTAGES: Central Control. Eliminates variations in pressure and flow. Individual pipes to each outlet allowing separate shut-off
More informationtechnical brochure 3-/4-WAY ROTARY MIXING VALVES ARV ProClick ELECTRIC ACTUATORS ARM ProClick
technical brochure 3-/4-WAY ROTARY MIXING VALVES ARV ProClick ELECTRIC ACTUATORS ARM ProClick 2017 3 Table of contents ADVANTAGES OF THE NEW ProClick GENERATION...4 INFORMATION ABOUT PACKAGING AND DELIVERY...5
More informationT6-PLAN CENTRALLY CONNECTED RADIATOR.
50 T6-PLAN CENTRALLY CONNECTED RADIATOR Technical data T6-PLAN CENTRALLY CONNECTED RADIATOR. Connections 4 x internal thread G 1/2 and 2 x external thread G 3/4 bottom centre 10 bar max. Max. positive
More informationFLOW RATE STATIC BALANCING Valves for radiators
Balancing part 3 TECHNICAL FOCUS FLOW RATE STATIC BALANCING Valves for radiators The valves for radiators equipped with pre-setting device play a very important role in balancing the heating systems circuits.
More informationHYDRAULIC SEPARATOR PRODUCTION RANGE. Code Size Max. flow rate (l/h) " "1/ "1/ " 8.
HYDRAULIC SEPARATOR CT0617.0_03 EN March 2016 o o o Threaded versions equipped with flat seat F union connections, therefore, easy installation and/or maintenance; Self-cleaning: Dirt separator equipped
More informationMULTI-FLUID SOLENOID VALVES 1/8 AND 1/4
- MULTI-FLUID SOLENOID VALVES /8 AND / MULTI FLUID SOLENOID VALVES /8 For applications that require robust electrical valves with a small footprint frequently found in industrial applications, the Series
More information22C, 22CX, 22CX5, 26LC Series
C, CX, CX, LC Series ON/OFF electrothermic actuators Technical Data Sheet WattsWater.eu Description The electrothermic actuators C, CX, CX and LC Series are ON/OFF devices used for automatic actuation
More informationProdukt informatie COSTER T.E.
Produkt informatie COSTER T.E. D92 - MAS...C2 Eng. 27.04. MZ ELECTRONIC MIXING UNITS FOR DWH D92 27.04. MZ MAS... C2 Eng. Supplied with valve, actuator, controller & temperature detector Valve connections
More informationContents. The Company Page 4. Female Lever Valves Page 5. Female Gate Valves Page 6. Bronze Gate Valves Page 7. Angle Valves Page 8-9
VALVES CATALOGUE Contents The Company Page 4 Female Lever Valves Page 5 Female Gate Valves Page 6 Bronze Gate Valves Page 7 Angle Valves Page 8-9 Float Valves Page 10-11 Foot Valves Page 12 Spring Check
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationMrPEX 1 ¼ Stainless Steel Manifold Installation Guide
MrPEX 1 ¼ Stainless Steel Manifold Installation Guide Design MrPEX 1 1/4 Stainless Steel Manifold is made from high quality stainless steel, and is offered in 2 through 12 loop configurations. The manifold
More information