F-SERIES FDA AIR DIAPHRAGM PUMPS

Transcription

1 F-SERIES FDA AIR DIAPHRAGM PUMPS

2 FDA AIR DIAPHRAGM PUMPS DIMENSION FDA PUMPS FDA Grade Elastomers Electropolished and Passivated Stainless Steel Wet End Parts Oversized Tri-Clamp Connection Standard Limited Tools for Complete Servicing F100 F150 F200 Air Inlet 1/2 FNPT Liquid Inlet 1-1/ Liquid Outlet 1-1/ Weight 38 lbs 72 lbs 115 lbs (17kg) (33 kg) (52 kg) PERFORMANCE Max Capacity 48 gpm 115 gpm 190 gpm (182 lpm) (435 lpm) (719 lpm) Max Pressure 120 psi (8.2 bar) Max Solids Suction Lift Dry 17 ft-h 2 O 22 ft-h 2 O 24.4 ft-h 2 O (5.2 m-h 2 (6.7 m-h 2 (7.4 m-h 2 Suction Lift Wet 30 ft-h 2 O 31 ft-h 2 O 31.7 ft-h 2 O (9.1 m-h 2 (9.4 m-h 2 (9.7 m-h 2

3 MODEL DESIGNATION MATRIX PRODUCT SERIES FLUID CHAMBERS/ MANIFOLDS INTERMEDIATE/ INNER CHAMBER FLUID CONNECTION TYPE SPECIAL (HARDWARE, MUFFLER) SPECIAL (PORTING) PUMP SIZE VALVE/BALL DIAPHRAGM VALVE SEAT O-RINGS SPECIAL (OTHER) F X X X PUMP SIZE 100 = 1 Inch 150 = 1-1/2 Inch 200 = 2 Inch 2 3 INTERMEDIATE / INNER CHAMBER A = Aluminum 3 = Stainless Steel FLUID CHAMBER / MANIFOLDS E = Electropolished & Passivated 316 Stainless Steel 6 7 VALVE SEAT 3 = Stainless Steel O-RINGS B = Buna-N (FDA) Use with H diaphragm M = EPDM (FDA) Use with 4 diaphragm T = PTFE 1 FLUID CONNECTION TYPE 4 WET END REPAIR KIT Wet end kit contains 2 diaphragms, (2 back-up diaphragms if required), 4 balls, 4 seats, and 4 seat o-rings. PRODUCT SERIES T = Tri=Clamp WET END REPAIR KIT PUMP SIZE 5 DIAPHRAGM DIAPHRAGMS H = Hytrel (FDA) T = PTFE 4 = Santoprene (FDA) VALVE/BALL VALVE/BALL B = Buna-N (FDA) Use with H diaphragm S = Santoprene (FDA) T = PTFE VALVE SEAT O-RINGS 0 SPECIAL OPTION 000 = See Option Codes 080 = Enchanced Metal Muffler F W E - X X X AIR END REPAIR KIT Air end repair kit contains pilot sleeve assembly and main air valve. PRODUCT SERIES PUMP REPAIR KIT PUMP SIZE INTERMEDIATE / INNER CHAMBER A = Aluminum 3 = Stainless Steel MATERIAL F A K - X X X - 2 Pulsation Dampener Smooths Discharge Flow and Pressure Automatic Self-Charging and Self-Venting Sanitary AISI 316 Stainless Steel Housing Material Sanitary Tri-Clamp Connections FDA and Sanitary Grade Elastomers 3/8, 1/2, 3/4, 1, 1-1/2, 2, 3 Inch Sizes Available See Pulsation Dampener Flyer for Additional Information and Product Specifications

4 F100 - PERFORMANCE CURVES PERFORMANCE CURVE (1 RUBBER)* Min 0 0 DISCHARGE FLOW-Liters/Min. Major Unit Minor Unit 5 Secondary 120 X Y (8,2) Unit Max Min 0 Major Minor Unit (6,8) PRESSURE INLET/OUTLET PSIG (BARS) PRESSURE INLET/OUTLET PSIG (BARS) 80 (5,4) (4,1) (2,7) 20 (1,3) DISCHARGE FLOW-U.S. Gals./Min. PERFORMANCE CURVE (1 TPE)* (4,1) (2,7) 20 (1,3) DISCHARGE FLOW-U.S. Gals./Min (83,9) 230 (69,9) 184 (55,9) 138 (41,9) 92 (27,9) 46 (13,9) 276 (83,9) 230 (69,9) 184 (55,9) 138 (41,9) 92 (27,9) 46 (13,9) TOTAL HEAD IN FEET (METERS) TOTAL HEAD IN FEET (METERS) 48 gpm (182 lpm) Max. Suction Lift Dry: 17 ft-h 2 O (5.2 m-h 2 Max. Suction Lift Wet: 30 ft-h 2 O (9.1 m-h 2 38 lbs (17 kg) 1/2 FNPT 1-1/ 1-1/ 16.2 (411 mm) 13.0 (330 mm) 8.4 (213 mm) 48 gpm (182 lpm) Max. Suction Lift Dry: 17 ft-h 2 O (5.2 m-h 2 Max. Suction Lift Wet: 30 ft-h 2 O (9.1 m-h 2 38 lbs (17 kg) 1/2 FNPT 1-1/ 1-1/ 16.2 (411 mm) 13.0 (330 mm) 8.4 (213 mm) PERFORMANCE CURVE (1 PTFE)* n 0 0 DISCHARGE FLOW-Liters/Min. ajor Unit nor Unit 5 5 condary 120 X Y ax (8,2) 276 n (6,8) ajor Unit nor Unit 20 PRESSURE INLET/OUTLET PSIG (BARS) 80 (5,4) (4,1) (2,7) 20 (1,3) DISCHARGE FLOW-U.S. Gals./Min (83,9) 230 (69,9) 184 (55,9) 138 (41,9) 92 (27,9) 46 (13,9) TOTAL HEAD IN FEET (METERS) 45 gpm (170 lpm) Max. Suction Lift Dry: 17 ft-h 2 O (5.2 m-h 2 Max. Suction Lift Wet: 30 ft-h 2 O (9.1 m-h 2 38 lbs (17 kg) 1/2 FNPT 1-1/ 1-1/ 16.2 (411 mm) 13.0 (330 mm) 8.4 (213 mm) *Flow rates indicated on all three charts shown were determined by pumping water at flooded suction, using an aluminum intermediate fitted pump. For optimum life and performance, pumps should be specified so that daily operation parameters will fall in the center of the pump performance curve.

5 F100 - DIMENSIONS 1-1/2 (1.984 O.D.) Tri-Clamp (Sanitary Flange) (x2) 1/2-14 FNPT (Air Inlet) (412mm) (412mm) 16.2 (412mm) (386mm) (386mm) 15.2 (386mm) (244mm) (244mm) 9.6 (244mm) (51mm) (51mm) 2.0 (51mm) (330mm) (330mm) (213mm) (213mm) 13.0 (330mm) (231mm) (231mm) 8.4 (213mm) (10mm) (10mm) 0.4 (10mm) (84mm) (84mm) (155mm) (127mm) (155mm) (127mm) 9.1 (231mm) 3.3 (84mm) (33mm) 4.9 (33mm) (155mm) (127mm) (188mm) (188mm) A2 A2 DISPLAYED MUFFLER, ADDED DIMENSIONS TO MUFFLER DISPLAYED MUFFLER, ADDED DIMENSIONS TO MUFFLER DCM DCM INITIAL SUBMISSION INITIAL SUBMISSION BLS (125mm) (125mm) 1.3 (33mm) 4.9 BLS DISPLAYED MUFFLER, ADDED DIMENSIONS TO MUFFLER DCM INITIAL SUBMISSION BLS PRERELEASE ISIONING.XX 0.01.XXX XX.XXX ANGULAR ANGULAR 3/4-14 FNPT (Exhaust Port) DIMENSIONS IN IN DIMENSIONS IN INCHES A 0.5 DEFAULT 0.5 TOLERANCES.XX.XXX 0.5 TITLE SCALE DRAWN DIMENSIONS IN INCHES DRAWING NUMBER DRAWING 7750 TYLER BLVD.NUMBER MENTOR, OHIO 4 (4) FAX (4) SHEET 1 OF B. SCHULER TITLE F100 PUMP ELEVATION - SANITARY MODELS SCALE DRAWN F100-TAE-ELEV F100-TAE-ELEV DRAWING NUMBER F100-TAE-ELEV * Note - Suction / Discharge right are default ports. See part number matrix option code for additional porting options. DRAWN B. SCHU B. SCHULER 0.01 F100 PUMPPUMP ELEVATION - LLC SANITARY MODELS F100 PUMP ELEVATION - SANITARY MODELS THE ALL-FLO COMPANY, ANGULAR SCALE SHEET 1SHEET OF 1 1 OF 1 DECIMAL (INCHES) 8.6 (218mm) A THE PUMP ALL-FLO PUMP COMPANY, LLC THE ALL-FLO COMPANY, LLC DEFAULT DEFAULT TOLERANCES TOLERANCES (218mm) (218mm) 7750 TYLER BLVD. MENTOR, OHIO 4 (4) FAX (4) TYLER BLVD. MENTOR, OHIO 4 (4) FAX (4) (125mm) A A2 DECIMAL (INCHES) DECIMAL (INCHES) TITLE 7.4 (188mm) ISIONING PRERELEASEPRERELEASE ISIONING A

6 F150 - PERFORMANCE CURVES PERFORMANCE CURVE (1-1/2 RUBBER)* PERFORMANCE CURVE (1-1/2 TPE)* PERFORMANCE CURVE (1-1/2 PTFE)* 115 gpm (435 lpm) Max. Suction Lift Dry: 22 ft-h 2O (6.7 m-h 2 Max. Suction Lift Wet: 31 ft-h 2O (9.4 m-h 2 72 lbs (33 kg) 20.6 (523 mm) 19.1 (485 mm) 11.2 (284 mm) 115 gpm (435 lpm) Max. Suction Lift Dry: 22 ft-h 2O (6.7 m-h 2 Max. Suction Lift Wet: 31 ft-h 2O (9.4 m-h 2 72 lbs (33 kg) 20.6 (523 mm) 19.1 (485 mm) 11.2 (284 mm) 115 gpm (435 lpm) Max. Suction Lift Dry: 18 ft-h 2O (5.5 m-h 2 Max. Suction Lift Wet: 31 ft-h 2O (9.4 m-h 2 72 lbs (33 kg) 20.6 (523 mm) 19.1 (485 mm) 11.2 (284 mm) *Flow rates indicated on all three charts shown were determined by pumping water at flooded suction, using an aluminum intermediate fitted pump. For optimum life and performance, pumps should be specified so that daily operation parameters will fall in the center of the pump performance curve.

7 F150 - DIMENSIONS 2 (2.516 O.D.) Tri-Clamp (Sanitary Flange) (x2) 3/4-14 FNPT (Air Inlet) (490mm) (490mm) (490mm) (523mm) (523mm) (523mm) (312mm) (312mm) (312mm) 2.4 (61mm) 2.4 (61mm) 2.4 (61mm) 19.1 (485mm) 19.1 (485mm) 10.7 (272mm) 10.7 (272mm) 19.1 (485mm) 10.7 (272mm) 0.5 (13mm) 0.5 (13mm) 11.2 (285mm) 11.2 (285mm) 0.5 (13mm) 11.2 (285mm) 4.0 (102mm) 4.0 (102mm) (178mm) 6.0 (178mm) 6.0 (152mm) 7.0 (152mm) 4.0 (102mm) (147mm) (147mm) (46mm) 5.8 (46mm) (178mm) 6.0 (152mm) B PRERELEASE ISIONING PRERELEASE ISIONING 1.8 (147mm) (46mm) INITIAL SUBM P 7.8 (198mm) 7.8 (198mm) 9.7 (246mm) 9.7 (246mm) 7.8 (198mm) INITIAL SUBMISSION INITIAL SUBMISSION THE ALL-F DEFAULT TOLERANCES DECIMAL (INCHES).XX.XXX 1-1/ FNPT (Exhaust Port)** ANGULAR DEFAULT 7750 TYLER BLV TOLERANCES DECIMAL (INCHES).XX TITLE.XXX TITL SHEET O ANGULAR GEN DAT 0 DR (246mm) * Note - Suction / Discharge right are default ports. See part number matrix option code for additional porting options. **Note: A reducer bushing is included with the standard muffler which reduces the port to 3/4-14 FNPT.

8 F200 - PERFORMANCE CURVES PERFORMANCE CURVE (2 RUBBER)* PERFORMANCE CURVE (2 TPE)* PERFORMANCE CURVE (2 PTFE)* 190 gpm (719 lpm) Max. Suction Lift Dry: 24.4 ft-h 2O (7.4 m-h 2 Max. Suction Lift Wet: 31.7 ft-h 2O (9.7 m-h lbs (52 kg) 25.9 (658 mm) 20.5 (521 mm) 13.5 (343 mm) 190 gpm (719 lpm) Max. Suction Lift Dry: 24.4 ft-h 2O (7.4 m-h 2 Max. Suction Lift Wet: 31.7 ft-h 2O (9.7 m-h lbs (52 kg) 25.9 (658 mm) 20.5 (521 mm) 13.5 (343 mm) 180 gpm (681 lpm) Max. Suction Lift Dry: 19.3 ft-h 2O (5.9 m-h 2 Max. Suction Lift Wet: 31.7 ft-h 2O (9.7 m-h lbs (52 kg) 25.9 (658 mm) 20.5 (521 mm) 13.5 (343 mm) *Flow rates indicated on all three charts shown were determined by pumping water at flooded suction, using an aluminum intermediate fitted pump. For optimum life and performance, pumps should be specified so that daily operation parameters will fall in the center of the pump performance curve.

9 F200- DIMENSIONS 2-1/2 (3.047 O.D.) Tri-Clamp (Sanitary Flange) (x2) 3/4-14 FNPT (Air Inlet) 24.4 (620mm) 25.9 (658mm) 14.6 (371mm) 2.5 (64mm) 10.9 (277mm) 20.5 (521mm) 0.5 (13mm) 13.5 (343mm) 4.0 (102mm) 7.3 (185mm) 6.3 (1mm) 1.8 (46mm) 5.4 (137mm) 8.2 (208mm) 9.8 (249mm) 1-1/ FNPT (Exhaust Port)** * Note - Suction / Discharge right are default ports. See part number matrix option code for additional porting options. **Note: A reducer bushing is included with the standard muffler which reduces the port to 3/4-14 FNPT. Information subject to change without notice. Please contact your All-Flo distributor to confirm.

10 AUTO/PLATING & FINISHING CERAMIC SLIP / GLAZE CHEMICAL / PETROCHEMICAL FOOD & BEVERAGE MINING OEMS OIL & GAS / REFINERY PAINT & COATING ALL-FLO is committed to the pursuit of designing and manufacturing the highest quality product available to industry. Since the beginning in 1986, All-Flo engineers have used their extensive knowledge of today s engineered materials, advanced air system logic and manufacturing techniques to develop the superior group of lube-free, air-operated diaphragm pumps found in this catalog. Every pump is performance engineered and quality built to provide trouble-free service under the toughest conditions. YOUR AUTHORIZED ALL-FLO DISTRIBUTOR 7750 Tyler Blvd. Mentor, Ohio 4 phone: fax: FXXX_Rev_A3