Instruction Manual HAND PALLET TRUCK HP SERIES A. Note: Owner/Operator must read and understand this instruction
|
|
- Aubrey Wilkerson
- 6 years ago
- Views:
Transcription
1 Instruction Manual HAND PALLET TRUCK HP SERIES A Note: Owner/Operator must read and understand this instruction manual before using the hand pallet truck.
2 Thank you for choosing our pallet truck. For your safety and correct operation, please carefully read the manual before use. NOTE: All of the information reported herein is based on data available at the time of printing. The factory reserves the right to modify its own products at any time without notice or incurring in any sanction. Please verify with the factory for possible updates.. GENERAL SPECIFICATIONS Standard Model HP0S HP0L HP5S HP5L HP30S HP30L Quick Lift Model HPQ0S HPQ0L HPQ5S HPQ5L HPQ30S HPQ30L Capacity (kg) Max. Fork Height (mm) 00(or90) Min. Fork Height (mm) 85(or75) Fork Length (mm) Width Overall Forks (mm) Individual Fork Width (mm) 60 Load Wheel Diameter (mm) Ø 80x60(or Ø 70x9) Nylon, Polyurethane Steering Wheel Diameter (mm) Ø 00(or Ø 80) Nylon, Polyurethane, Rubber Net Weight (kg) Special fork length is available 800, 900, 950, 000, 500, 000mm. Materials and specification are subject to change without notice.. TO ATTACH HANDLE TO PUMP UNIT. Loosen the setting screw (0H) on the crank link (39H).. Remove three screws (H09) and three spring washers (H0) from the base (03)..3 Place the handle (H0, H0A, H0 (JR), H0 (FR)) on the base (03), please note: Feed the rod and chain (H07) through the center of the base (03) and axle (09).. Insert three screws (H09) with spring washers (H0) into the base (03). Then tighten them securely..5 Raise the crank link (39H) and put the pin on rod and chain (H07) into the groove of crank link (39H). 3. TO ADJUST RELEASE DEVICE On the handle of the pallet truck, you will find the control lever (H06) which can be set in three positions (See Fig. ): LOWER=to lower the forks; NEUTRAL=to move the load; ASCENT=to raise the forks. After assembling the handle, you can adjust the three positions. 3. First tighten the setting screw (0H) on the crank link (39H) until the LOWER position function works. 3. If the forks elevate while pumping in the NEUTRAL position, turn the setting screw (0H) clockwise until pumping the handle does not raise the forks and the NEUTRAL position functions correctly. 3.3 If the forks descend while pumping in the NEUTRAL position, turn the setting screw (0H) counter-clockwise until the forks do not lower. 3. If the forks do not descend when the control lever (H06) is in the LOWER position, turn the setting screw (0H) clockwise until raising the control lever (H06) lowers the forks. Then check the NEUTRAL position as per item 3. and If the forks do not lift while pumping in the ASCENT position, turn the setting screw (0H) counter-clockwise until the forks elevate while pumping in the ASCENT position. Then check the
3 NEUTRAL and LOWER position as per item 3., 3.3 and 3... MAINTENANCE. OIL Please check the oil level every six months. The oil capacity is about 0.3lt. Restore the fluid level in the rubber reservoir to 5mm below the top; this must be with the forks in the lowered position. Use the hydraulic type oil according to temperature scale below. Temperature Oil -0 ~+0 L-HV6 Hydraulic oil. HOW TO EXPEL AIR FROM THE PUMP UNIT Air may enter the unit when the seals are replaced. Lift the control lever (H06) to the LOWER position, then move the handle (H0, H0 (JR), H0A, H0 (FR)) up and down for several times..3 DAILY CHECK AND MAINTENANCE Daily check of the pallet truck can limit wear and tear of the unit. Pay special attention to the wheels (7, F6 or F7), the axles (F, F8, F, F), the handle (H0, H0A, H0 (JR), H0 (FR)), the forks (F0) and lift and lower control.. LUBRICATION Use motor oil or grease to lubricate all moveable parts. 5. GUIDE TO SAFETY OPERATION For safe operation of the Hand Pallet Truck, please read all warning signs and instructions here and on the pallet truck prior to use. 5. Do not operate the pallet truck unless you are familiar with it and have been trained or authorized to do so. 5. Do not operate the truck unless you have been trained and authorized to do. Give special attention to the wheels, the handle assembly, the forks, and the lower control. 5.3 Do not use the truck on sloping ground. 5. Never place any part of your body in the lifting mechanism or under the forks or load. Do not carry passengers. 5.5 We advise that operators should wear gloves and safety shoes. 5.6 Do not handle unstable or loosely stacked loads. 5.7 Do not overload the truck. 5.8 Always place loads centrally across the forks and not at the end of the forks (See Fig. ). 5.9 The capacity of the truck assumes an evenly distributed load with the center of the load being at the halfway point of the length of the forks. 5.0 Make sure that length of the forks matches the length of the pallet. 5. Lower the forks to lowest height when the truck is not being used. 5. In other specific conditions the operators should take extra care in operating the truck.
4 6. TROUBLES SHOOTING NO TROUBLE CAUSE ACTION The forks do not lift to maximum height. -Not enough hydraulic oil. -Add more oil. 3 The forks do not lift up. The forks do not descend. Leaks 5 The forks descend without being lowered. -Not enough hydraulic oil. -The oil has impurities. -Discharge valve is out of adjustment. -Air in the hydraulic oil. -The rod (0) and the cylinder (59H) are deformed resulting from a seriously unbalanced load. -A part has been broken or been deformed resulting from unbalanced load. -The setting screw (0H) is not in the correct position. -Seals worn out or damaged. -Some parts may be cracked or worn out. -Impurities in the oil cause the discharge valve (B) to fail to close. -Air in the oil. -Seals worn or damaged. -Discharge valve (B) is out of adjustment. *NOTE: DO NOT ATTEMPT TO REPAIR THE PALLET TRUCK UNLESS YOU ARE TRAINED AND AUTHORIZED TO DO SO. -Pour in more filtered oil. -Change the oil. -Adjust the setting screw (0H) (See item 3.5). -Expel the air (See item.). -Replace the rod (0) or cylinder (59H). -Repair or replace component. -Adjust the setting screw (0H) (See item 3.). -Replace seals with new ones. -Check and replace with new ones. -Replace with filtered oil. -Expel the air (See item.). -Replace with new ones. -Adjust the setting screw (0H) (See item 3.3).
5
6 Pump Assembly
7 Parts List of Pump Assembly H A 7B 7C 7D H 0H H 59H 60H 6H 6H 63H 6H 65H Rod Base Steel roller Bushing Shaft Retaining ring Axle Washer Pressure rod Pressure valve body Split ring Washer Steel needle Bushing Pump body Dust cover Bearing Steering wheel axle Bearing Steering wheel, Nylon Steering wheel, Polyurethane Steering wheel, Poly/Nylon Steering wheel, Rubber Retaining ring Discharge valve body Discharge valve shaft Valve taper core Pressure regulating screw Crank link Setting screw Nut Parallel pin Retaining cover cover Pump rod Dust proof ring Pump cylinder Seal ring Nylon bushing Red copper washer Retaining ring Rhombus plate Dowel pin Dust proof ring Cylinder Seal ring Filler plug Reservoir cover Reservoir Dust cover 3
8 Quick Lift Pump Assembly
9 Parts List of Quick Lift Pump Assembly H A 7B 7C 7D H 0H H 59H 60H 6H 6H 63H 6H 65H M65 M66 M67 M68 M69 M630 M63 M63 M633 M63 M635 Rod Base Steel roller Bushing Shaft Retaining ring Axle Washer Pressure rod Pressure valve body Split ring Washer Steel needle Bushing Pump body Dust cover Bearing Steering wheel axle Bearing Steering wheel, Nylon Steering wheel, Polyurethane Steering wheel, Poly/Nylon Steering wheel, Rubber Retaining ring Discharge valve body Discharge valve shaft Valve taper core Pressure regulating screw Crank link Setting screw Nut Parallel pin Retaining cover cover Dust proof ring Red copper washer Retaining ring Rhombus plate Dowel pin Dust proof ring Cylinder Seal ring Filler plug Reservoir cover Reservoir Dust cover Seal ring Pump cylinder Pump rod Big spring Small spring base Plug 3
10 Parts List of Frame F0 F0 F03 F0 F05 F06 F08 F09 F0 F F F3 F F5 Torsion tube assembly Bushing Hex socket screw pin Torsion tube shaft Nut Leading roller Axle sleeve Frame Bolt pin H-link Load roller axle Bearing 8/* 8/* F6A F6B F6C F7A F7B F7C F8 F9 F0 F F F3 F F5 F6 *Note: Quantity for tandem roller is 8, for single roller is. Nylon load roller, tandem type Poly load roller, tandem type Poly/Nylon load roller, tandem type Nylon load roller, single type Poly load roller, single type Poly/Nylon load roller, single type Axle Roller Wheel frame H-link axle Pull rod axle Slotted nut Split pin Pull rod Eccentric pin
11 Parts List of Handle H0 H0A H0(JR) H0(FR) H0 H03 H0 H05 Handle Handle Handle Handle pin leaf pin pin H06 H07 H08 H09 H0 H H Control lever Rod and chain Rubber cushion washer Nylon roller pin 3 3
12 Assembly list Assembly AH AHQ B CH D E F F F3 F G HA HB HC HA HB HC I I I3 L K M N W SH SHQ Description Pump unit Quick lift pump unit Lowering valve ass y Lowering screw ass y Hydraulic valve ass y Handle seat ass y Nylon steering wheel ass y Polyurethane steering wheel ass y Polyurethane/Nylon steering wheel ass y Rubber steering wheel ass y Handle ass y Nylon load roller ass y (tandem type) Polyurethane load roller ass y (tandem type) Polyurethane/Nylon load roller ass y (tandem type) Nylon load roller ass y (single type) Polyurethane load roller (single type) Polyurethane/Nylon load roller ass y (single type) Tandem nylon load roller system ass y Tandem Polyurethane load roller system ass y Tandem Polyurethane/Nylon load roller system ass y Rhombus plate ass y Quick lift pump piston ass y spring cover ass y Pump piston ass y Safety valve ass y *Seal kit *Seal kit *Note: Seal kit include following parts:, 7, 8, 3, 37, 7, 9, 5, 56, 57, 57-, 58H, 60H, 6H, 69, M65, M68.
HAND PALLET TRUCK TX SERIES. Note: Owner/Operator must read and understand this instruction. manual before using the hand pallet truck.
Instruction Manual HAND PALLET TRUCK TX SERIES Note: Owner/Operator must read and understand this instruction manual before using the hand pallet truck. Thank you for choosing our pallet truck. For your
More informationInstruction Manual Pallet Truck with Load Indicator
Instruction Manual Pallet Truck with Load Indicator Note: Owner/Operator must read and understand this instruction manual before using the pallet truck with load indicator. RevA:04/007 Thank you for using
More informationInstruction Manual Pallet Truck with Load Indicator
Instruction Manual Pallet Truck with Load Indicator Note: Owner/Operator must read and understand this instruction manual before using the pallet truck with scale. Thank you for using this hand pallet
More informationPallet Truck with Scale Instruction Manual
Pallet Truck with Scale Instruction Manual 11 Harbor Park Drive Port Washington, NY 11050 Table of Contents General Specifications.............................3 Maintenance......................................4
More informationHand Pallet Truck OPERATION INSTRUCTIONS. Parts List. Note: Owner and operator MUST read and understand these
OPERATION INSTRUCTIONS Parts List Hand Pallet Truck Note: Owner and operator MUST read and understand these operating instructions before using this pallet truck. ATTENTION: 1. The waste packages should
More informationThank you for choosing our pallet truck. For your safety and correct operation, please carefully read the manual before use.
Thank you for choosing our pallet truck. For your safety and correct operation, please carefully read the manual before use. NOTE: All of the information reported herein is based on data available at the
More informationINSTRUCTION MANUAL VESTIL MANUFACTURING CORP. MODELS NUMBER: PM4-xxxx-LP URL:
INSTRUCTION MANUAL FOR Low Profile 4,000 lbs. Pallet Truck MODELS NUMBER: PM4-xxxx-LP VESTIL MANUFACTURING CORP. 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703 TELEPHONE: (260) 665-7586 -OR- TOLL
More informationOperating Instructions
Operating Instructions Parts List Hand Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Pallet Truck. Thank you for using our pallet truck. Your pallet
More information1. GENERAL SPECIFICATIONS 2. TO ATTACH DRAW-BAR TO PUMP UNIT
Thank you for using our pallet truck. Your pallet truck is made of high quality steel and is designed for the horizontal lifting and transport of loads on a pallet or standardized containers on a level,
More informationuline.com
π H-1679 H-2331 PALLET TRUCK SCALE 1-800-295-5510 uline.com Avoid placing the scale in locations that may AFFECT accuracy: 1. Temperature extremes Do not place in direct sunlight or near air conditioning
More informationGENERAL INFORMATION AVOID PLACING THE SCALE IN LOCATIONS THAT MAY AFFECT ACCURACY:
π H-4564 PALLET TRUCK SCALE WITH PRINTER 1-800-295-5510 uline.com AVOID PLACING THE SCALE IN LOCATIONS THAT MAY AFFECT ACCURACY: 1. Temperature extremes Do not place in direct sunlight or near air conditioning
More informationOperating Instructions
Operating Instructions Parts List Hand Pallet Truck PJ4400-2748-ACL Note: Operator MUST read and understand this operating instructions before use this Hand Pallet Truck. Thank you for using our pallet
More informationOperating Instructions Parts List
Operating Instructions Parts List FH1025-SMS-001_EN Hand Stacker 1.0T/2.5M Note: Owner and operator MUST read and understand this operating instructions before use this hand stacker. Date:March, 2012 Welcome
More informationInstruction Manual For Auto Shift Hydraulic Lift Table
Instruction Manual For Auto Shift Hydraulic Lift Table Model Number: CART-550-AS Note: Owner/Operator must read and understand this Instruction Manual before operating the lift & tilt table. Contents 1
More informationThe Specification EA15 Series Semi-Electric Stacker Note: Before using must read this manual and the various warning label!
The Specification EA15 Series Semi-Electric Stacker Note: Before using must read this manual and the various warning label! EKKO Material Handling Equipment Manufacturing, Inc. Contents Preface... - 2-1.
More informationHYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: , , , ,
HYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: 7631700, 7631705, 7631710, 7631715, 7631720 OPERATION & MAINTENANCE INSTRUCTIONS LS0316 INTRODUCTION Thank you for purchasing this CLARKE
More informationWESCO INDUSTRIAL PRODUCTS, INC. Deluxe Foot Pump Fork Pallet Truck. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Deluxe Foot Pump Fork Pallet Truck Part Number: 272766 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. TABLE OF
More informationHand Pallet Truck 2.5 tons
For your safety Please read this instruction manual before you use the Hand Pallet Truck! Contents: Part List and Instruction Model.: XTN 540-1150 Please keep these instructions for future reference. Hand
More informationInstruction Manual. High Lift Hand Truck
Instruction Manual High Lift Hand Truck Note: The Owner/Operator must read carefully and understand all the information presented here before operation. CONTENT 1. Specification. 2 2. Safety Instructions...
More informationWESCO INDUSTRIAL PRODUCTS, INC. Scale Pallet Truck. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Scale Pallet Truck Part Number: 272936 & 272938 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. Page 1 of 16 TABLE
More informationOperating Instructions Parts List
Operating Instructions Parts List SPN0 Semi-Electric Stacker Note:Owner and Operator MUST read and understand this operating instructions before use this stacker. Welcome to use our half-electric stacker
More informationHand Pallet Truck NC. Operation Manual
Hand Pallet Truck -------NC Operation Manual Operation Manual 1 Application Range This product is suitable for using in rated load of up to 5500lbs. This PL5500HD is the perfect jack for handling palletized
More information1. WARNINGS 3. DAILY INSPECTION
Thank you for using this lift table. Your lift table is made of high quality steel and is designed for the horizontal lifting and transport of loads on a level, fixed base. For your safety and correct
More informationHYDRAULIC PALLET TRUCK. MODEL No: PTE550 PART Nos OPERATION & MAINTENANCE INSTRUCTIONS
HYDRAULIC PALLET TRUCK MODEL No: PTE550 PART Nos 7630171 OPERATION & MAINTENANCE INSTRUCTIONS 0604 Please read these instructions carefully before operating the truck Thank you for purchasing this CLARKE
More informationWESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Semi Electric Pallet Truck. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Heavy Duty Semi Electric Pallet Truck Part Number: 273289 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. Table
More informationHYDRAULIC PALLET TRUCK
HYDRAULIC PALLET TRUCK Models; PT550C & PT685C Part Nos 7630172 & 7630177 OPERATING & MAINTENANCE INSTRUCTIONS GC05/12 INTRODUCTION Thank you for purchasing this CLARKE Pallet Truck. Before attempting
More informationHYDRAULIC PALLET TRUCKS
HYDRAULIC PALLET TRUCKS HYDRAULIC PALLET TRUCKS MODEL Nos: PT550 GAL & PT685 GAL PART Nos: 7630234 & 7630236 OPERATION & MAINTENANCE INSTRUCTIONS 0204 Please read these instructions carefully before operating
More informationHydraulic Hand Pallet Trucks
Operating Instructions & Parts Manual 12U124 Please read and save these instructions. Read carefully before attempting to assemble, install, operate, or maintain the product described. Protect yourself
More informationOPERATORS MANUAL/INSTRUCTIONS/PARTS & SERVICE FOR MANUAL & ELECTRIC
OPERATORS MANUAL/INSTRUCTIONS/PARTS & SERVICE FOR MANUAL & ELECTRIC TABLE OF CONTENTS SAFETY DELIVERY INSPECTION OPERATION 4 MAINTENANCE 5 TROUBLE SHOOTING 5 PARTS 6-15 Frame Scissor Assembly 6-7 Thrust
More information5,500 lbs. Pallet Jack
5,500 lbs. Pallet Jack ATD-7406 Operating Instructions & Parts Manual Capacity 5,500 lbs.! The safety alert symbol is used to alert you to potential personal injury hazards. Obey all safety messages that
More informationWESCO INDUSTRIAL PRODUCTS, INC. Manual Non Telescoping High Lift Truck. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Manual Non Telescoping High Lift Truck Part Number: 272462 & 272463 Note: Operator MUST read and understand these operating instructions before using this Truck. TABLE OF
More information4400-Lb. Capacity Pallet Jack
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item#
More informationBFQ Hand Pallet Truck -Quick Lift Operation Manual
BFQ Hand Pallet Truck -Quick Lift Operation Manual Original instruction Ningbo Ruyi Joint Stock Co.,Ltd 656 North Taoyuan Road, Ninghai 315600,Zhejiang,P.R. China EC Declaration of Conformity According
More informationWESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Part Number: 260207 & 260208 Note: Operator MUST read and understand these operating instructions before using this. TABLE OF CONTENTS General Information... 2. Description...
More informationInstruction Manual. BS Series
Instruction Manual BS Series NOTE: Owner/Operator must read and understand this instruction manual before using the lift table. RevB: 02/2009 1 Operation and Service Manual BEFORE OPERATING THE LIFT TABLE,
More information4400-Lb. Capacity Extra-Long Pallet Jack
4400-Lb. Capacity Extra-Long Pallet Jack Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationWESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Scissors Lift Tables. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Part Number: 272970 & 272973 Note: Operator MUST read and understand these operating instructions before using this Heavy Duty Scissors Lift Table. TABLE OF CONTENTS 1 General
More informationInstruction Manual BS50D
Instruction Manual BS50D NOTE: Owner/Operator must read and understand this instruction manual before using the lift table. 1 Operation and Service Manual BEFORE OPERATING THE LIFT TABLE, READ THIS MANUAL
More informationInstruction Manual. Note: Owner/Operator must read and understand this instruction
Instruction Manual HEX300 HEX500 Note: Owner/Operator must read and understand this instruction manual before using the table. Lift Table HEX Series HEX300, HEX500 Operation and Service Manual BEFORE OPERATING
More informationMODEL H6287-H6289 PALLET JACKS INSTRUCTIONS
MODEL H6287-H6289 PALLET JACKS INSTRUCTIONS Specifications Model H6287 H6288 H6289 Capacity Overall Fork Dimensions Individual Fork Width Minimum Fork Height Maximum Fork Height 1,000 Lbs. 4,000 Lbs. 5000
More informationOPERATION&SERVICE MANUAL MODEL:H10J MANUAL STACKER
OPERATION&SERVICE MANUAL MODEL:H0J MANUAL STACKER Eoslift Automation Technology Corp. No., Yanjia Road, Yuantong Town, Haiyan, Zhejiang CONTENTS.Structural Data Form EJ(Single frame) Structural Data Form
More informationOPERATION MANUAL. Note: Owner and operator MUST read and understand the operating instructions before using the Hand Pallet Truck. Date:2014.
OPERATION MANUAL Note: Owner and operator MUST read and understand the operating instructions before using the Hand Pallet Truck. Date:2014.07 1 MLX55 SERVICE CHECK LIST OPERATION A. With control lever
More informationHAND PALLET TRUCKS OPERATORS MANUAL INSTRUCTION MANUAL PARTS & SERVICE
LOW PROFILE TRUCKS HAND PALLET TRUCKS OPERATORS MANUAL INSTRUCTION MANUAL PARTS & SERVICE UNIQUE CAPACITY/APPLICATION OPTIONS AND ACCESSORIES W ARRANTY EXCLUSIVE year hydraulic pump Model LR0655 Hand Pallet
More informationINSTRUCTION MANUAL HYDRAULIC STACKER
INSTRUCTION MANUAL HYDRAULIC STACKER Model:TF40 1. Brief Instruction I. Use & applicable range It is a convertible vehicle using for lifting and transporting in workshop, warehouse and wharf, etc. Its
More informationOWNER S MANUAL EPT-55 ! WARNING! HAND PALLET TRUCK
HAND PALLET TRUCK EPT-55 OWNER S MANUAL! WARNING! DO NOT OPERATE OR SERVICE THIS PRODUCT UNLESS YOU HAVE READ AND FULLY UNDERSTOOD THE ENTIRE CONTENTS OF THIS MANUAL. FAILURE TO DO SO MAY RESULT IN PROPERTY
More informationINSTRUCTION MANUAL ALL TERRAIN PALLET TRUCK HAND PALLET TRUCK
INSTRUCTION MANUAL ALL TERRAIN PALLET TRUCK HAND PALLET TRUCK WARNING! 1. Read and understand instruction manual before using the pallet truck. 2. Do not place hands or feet under the pallet truck at any
More informationWESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Folding Handle Scissors Lift Table : 260201 Note: Operator MUST read and understand these operating instructions before using this Folding Handle Scissors Lift Table. TABLE
More informationOperator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0
Operator s Manual Nitro 750 Nitro 750X Nitro 1000 Nitro 1000X September.27.2018REV0 Table of Contents Introduction...3 Safety.....4 Equipment Requirements......5 What You Have Received. 5 Serial Number...6
More informationInstruction Manual FM180. NOTE: Owner/Operator must read and understand this instruction manual before using the mover.
Instruction Manual FM180 NOTE: Owner/Operator must read and understand this instruction manual before using the mover. Contents 1. Application 2. Specifications 3. Assembly 4. Precautions and Preparation
More informationOWNER S MANUAL FPT-55 ! WARNING! HAND PALLET TRUCK
HAND PALLET TRUCK FPT-55 OWNER S MANUAL! WARNING! DO NOT OPERATE OR SERVICE THIS PRODUCT UNLESS YOU HAVE READ AND FULLY UNDERSTOOD THE ENTIRE CONTENTS OF THIS MANUAL. FAILURE TO DO SO MAY RESULT IN PROPERTY
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Hand Pallet Trucks Model SS45
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Hand Pallet Trucks Model SS45 This publication, 1188027A, applies to the Lift-Rite Hand Pallet Truck, Model SS45 and
More informationASSEMBLY & OPERATION INSTRUCTION MANUAL
Sliding Bridge Jack 3,500 lbs. Capacity ASSEMBLY & OPERATION INSTRUCTION MANUAL TABLE OF CONTENTS Specifications... 2 Description & Features... 3 Installation Instructions... 4 Safety Instructions... 4
More informationOPERATOR S MANUAL EPT-55 HAND PALLET TRUCK WARNING
OPERATOR S MANUAL EPT-55 HAND PALLET TRUCK ACTUAL PRODUCT MAY NOT APPEAR EXACTLY AS SHOWN WARNING Do not operate or service this product unless you have read and fully understand the entire contents of
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Models LCR55 and LCS55 Versions This publication, 1130442C, applies to the Lift-Rite
More informationMANUAL LIFTER TROLLEY INSTRUCTION MANUAL
MANUAL LIFTER TROLLEY INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand 2 www.jbstools.com WWW.CHALLENGERHOISTS.COM.AU
More informationELECTRIC LIFTER TROLLEY INSTRUCTION MANUAL
ELECTRIC LIFTER TROLLEY INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand 2 www.jbstools.com WWW.CHALLENGERHOISTS.COM.AU
More informationInstruction Manual MJ520 Mobile Hydraulic Scissor Lift Table 770 lbs. (350 kg)
Instruction Manual MJ520 Mobile Hydraulic Scissor Lift Table 770 lbs. (350 kg) WARNING! Read this operation manual carefully and understand fully the operating instructions. Improper use of this unit could
More informationRacing Jack Max. Capacity: 3,000 lbs. (1,361 kg)
R SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:
More informationWARNING. Electric Recovery Winch. General Safety Precautions
1 Electric Recovery Winch Thanks for purchasing a WINCH. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available
More informationMANUAL TRANSAXLE Return to Main Table of Contents
MANUAL TRANSAXLE Return to Main Table of Contents GENERAL... 2 MANUAL TRANSAXLE CONTROL... 12 SHIFT LEVER ASSEMBLY... 14 MANUAL TRANSAXLE... 15 MANUAL TRANSAXLE ASSEMBLY... 17 FIFTH SPEED SYNCHRONIZER
More informationInstruction Manual Standard (MJ484-MJ489) and Heavy Duty (MJ490-MJ495) Hydraulic Hand Pallet Truck
Instruction Manual Standard (MJ484-MJ489) and Heavy Duty (MJ490-MJ495) Hydraulic Hand Pallet Truck 9008-08/15/07 Warning! Read and understand the entire operator s manual before using the pallet truck.
More informationService Jacks. Operating Instructions & Parts Manual. Model Number. Capacity 4 Ton 4 Ton Air/ Manual 10 Ton 10 Ton Air/ Manual HW93657/ HW93660
Service Jacks Operating Instructions & Parts Manual Model Number HW93657 HW93667 HW93660 HW93662 Capacity 4 Ton 4 Ton Air/ Manual 10 Ton 10 Ton Air/ Manual Made in North America HW93657/ HW93660 HW93667/
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Models LCM50, LCU50, and Four-Way Versions This publication, 114374C, applies to the
More informationHeavy Duty Hoist WARNING. General Safety Precautions. Thank you for purchasing a
Heavy Duty Hoist Thank you for purchasing a Hoist. This manual covers operation and maintenance of the hoist. All information in this publication is based on the latest production information available
More informationHEAVY DUTY TROLLEY JACK. Operation Manual
HEAVY DUTY TROLLEY JACK 4T Operation Manual Make sure to read and fully understand the instruction manual before using this product and keep the manual properly 1 General Description Product Description
More informationMODEL TON HYDRAULIC FLOOR JACK
MODEL 66510 10 TON HYDRAULIC FLOOR JACK USER'S MANUAL *This hydraulic jack conforms to all "ANSI / ASME" safety standards. Jackco Transnational Inc. 2010 South El Monte, CA 888-452-2526 To see more jackco
More informationMODEL TON HYDRAULIC FLOOR JACK
MODEL 66500 5 TON HYDRAULIC FLOOR JACK USER'S MANUAL *This hydraulic jack conforms to all "ANSI / ASME" safety standards. Jackco Transnational Inc. 2010 South El Monte, CA 888-452-2526 To see more jackco
More informationCONTENTS. Product Features and Specifications Installation Requirement Installation Exploded View Operation Instruction...
1 CONTENTS Product Features and Specifications... 3 Installation Requirement... 5 Installation... 6 Exploded View... 20 Test... 22 Operation Instruction... 25 Maintenance... 26 Trouble Shooting... 27 Parts
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Hand Pallet Trucks Model PST Plus
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Hand Pallet Trucks Model PST Plus This publication, 1269849/001B, applies to the Lift-Rite Hand Pallet Truck, Model
More informationParts List For Semi-Electric Stacker With adjustable fork
FigureⅡ 5 FigureⅡ 6 Parts List For Semi-Electric Stacker With adjustable fork (EMSM.6-A EMS.5M.6 A See figure Ⅱ) Item Description Qty Item Description Qty Truck Frame (EMSM.6-A ) 7 Crank Arm Truck Frame
More informationOperating Instructions and Parts Manual Long Chassis Service Jacks
Operating Instructions and Parts Manual Long Chassis Service Jacks Models JSJ-3T/JSJ-5T/JSJ-10T WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part No. M-454430 Ph.: 800-274-6848 Revision A 8/05
More informationUSER MANUAL PT-450. Please take time to read these instructions before starting to use the scale. Version /17
USER MANUAL PT-450 Please take time to read these instructions before starting to use the scale Version 1.0 08/17 Contents Product Specification 3 Safety Instructions 4 Loading & Moving Guidance 5 Before
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Titan Series Hand Pallet Trucks Model LCF55 - Freezer Special
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Model LCF55 - Freezer Special Lift-Rite, 5975 Falbourne Street, Mississauga, Ontario
More informationInstruction Manual MJ523 Mobile Hydraulic Scissor Lift Table 1650 lbs. (750 kg)
Instruction Manual MJ523 Mobile Hydraulic Scissor Lift Table 1650 lbs. (750 kg) WARNING! Read this operation manual carefully and understand fully the operating instructions. Improper use of this unit
More informationI. Safety Requirement WARNING. ATV/UTV Winch
1 2 ATV/UTV Winch Thank you for purchasing a COMEUP Winch. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available
More informationInstruction Manual. Hydraulic Jack. Note: The Owner/Operator must read carefully and understand all the information presented here before operation.
Instruction Manual Hydraulic Jack Note: The Owner/Operator must read carefully and understand all the information presented here before operation. 0 Contents 1 Warning in advance 2 2 Description.. 2 3
More information3,000 lb Aluminum Floor Jack. Owner s Manual
8032021 3,000 lb Aluminum Floor Jack Owner s Manual Specifications Max. Capacity: 3,000 lb Saddle Height: 3-1/2" to 17-3/4" max Hydraulic Lift: 14-1/4" Overall Dimensions:??? Weight: 42 lbs Handle:???
More informationMODEL 25-OM-10-C & 25-OA-10-C HYDRAULIC BOOSTER
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031
More informationRead this entire manual before operation begins.
Read this entire manual before operation begins. Record below the following information which is located on the serial number data plate. Serial No. Model No. Date of Installation Contents Specifications.............
More informationService Manual Blue Giant
R 2000 Service Manual Blue Giant Models PT-50 and PT-55 Developed by Super Stores Service This manual is intended for basic service and maintenance of the Blue Giant pallet jack. The pallet jacks you are
More informationATV WINCH. Thank you for purchasing a
1 2 ATV WINCH Thank you for purchasing a Winch. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available at
More informationESCO EQUIPMENT SUPPLY COMPANY FORKLIFT JACK. Instruction Manual. Forklift Jack
FORKLIFT JACK Instruction Manual 10885 Forklift Jack 1 Specifications Scissors Capacity Post Capacity 4 Tons 5 Tons Minimum-Maximum Scissors Height 2.5 to 16.7 Minimum-Maximum Post Height 16.4 to 28.5
More informationAir / Hydraulic Under Axle Jack
655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223
More informationFOR PREMIUM SCISSOR LIFT CARTS MODELS COVERED: CART-300-S-FR, CART-300-D-FR, CART-600-S-FR, CART-600-D-FR, CART-1000-S-FR, CART-1000-D-FR
INSTRUCTION MANUAL FOR PREMIUM SCISSOR LIFT CARTS MODELS COVERED: CART-300-S-FR, CART-300-D-FR, CART-600-S-FR, CART-600-D-FR, CART-1000-S-FR, CART-1000-D-FR Note: Owner/Operator must read and understand
More informationCONTENTS. Product Features and Specifications...1. Installation Requirement Steps of Installation.. 5. Exploded View Test Run...
CONTENTS Product Features and Specifications...1 Installation Requirement... 3 Steps of Installation.. 5 Exploded View...18 Test Run...21 Operation Instruction...22 Maintenance... 23 Trouble Shooting...
More informationHIGH LIFTER MANUAL, LAKERET
ORIGINAL INSTRUCTIONS TRANSLATED ENGLISH EDITION, VERSION 02, applicable FROM 1 January 2016 HIGH LIFTER MANUAL, LAKERET OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY
More informationOperating Instructions 20 Ton Air/Hydraulic Service Jack
MODEL: 3225 Operating Instructions 20 Ton Air/Hydraulic Service Jack WARNING: Important: Read these instructions and all warnings prior to using this equipment. Understand all operating procedures, safety
More informationSelf-Recovery Winch WARNING. General Safety Precautions
1 Self-Recovery Winch Thank you for purchasing a Winch. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available
More informationAir Assist Bottle Jack Max. Capacity: 12 Tons (4313C) & 20 Tons (4321C) Operating Range: psi
Form No. 545742 Parts List and Operating Instructions for: 4313C 4321C Air Assist Bottle Jack Max. Capacity: 12 Tons (4313C) & 20 Tons (4321C) Operating Range: 40 150 psi 45 44 43 42 41 40 39 22 1 37 28
More informationModel 289F. Operator s Manual for Morse Model 289F. MORStak TM Forklift-Mounted Drum Racker. The Specialist In Drum Handling Equipment
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Operating Instructions....................
More informationI. General Safety Precautions
1 2 ATV/UTV WINCH Thank you for purchasing a. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available at the
More informationELECTRIC PALLET TRUCK
π H-3405 ELECTRIC PALLET TRUCK 1-800-295-5510 uline.com GENERAL SAFETY GUIDELINES WARNING! Do not operate this truck unless you have been trained to use it, authorized to do so and have checked it is in
More informationPALLET TRUCK PAINTED OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY
ORIGINAL INSTRUCTIONS TRANSLATED ENGLISH EDITION, VERSION 01, APPLICABLE FROM 1 OCTOBER 1998 PALLET TRUCK PAINTED OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY 192.810-E01
More informationCONTENTS. Product Features and Specifications...1. Installation Requirement Steps of Installation.. 5. Exploded View Test Run...
CONTENTS Product Features and Specifications...1 Installation Requirement... 4 Steps of Installation.. 5 Exploded View...21 Test Run...26 Operation Instruction...27 Maintenance... 28 Trouble Shooting...
More informationMODEL EGA200 OWNERS MANUAL
3/8 RATCHET WRENCH MODEL EGA200 OWNERS MANUAL www.eaglecompressor.com 1-800-551-2406 READ THE ENTIRE MANUAL BEFORE PUTTING THIS TOOL IN SERVICE Limited Air Tool Warranty Wood Industries, Inc. warrants
More informationMaxx-Mini Lift MML-100 Service Manual
Maxx-Mini Lift MML-100 Service Manual LIFT PRODUCTS INC PO BOX 349 ELM GROVE WI 53122 262-521-5720 FAX 262-521-5725 Toll Free 877-543-8776 Model: MML-100, MML-100XL S/N Customer REGISTRATION INFORMATION
More informationMXSA Manual Push/Manual Lift Stackers Service Manual
MXSA Manual Push/Manual Lift Stackers Service Manual LIFT PRODUCTS INC PO BOX 349 ELM GROVE WI 53122 262-521-5720 FAX 262-521-5725 Toll Free 877-543-8776 Model: MXSA Series (MXSA-2200-63, MXSA-2200-98)
More informationOperating Instructions and Parts Manual PTX and JTX Series Pallet Trucks Models PTX-2036, PTX-2048, PTX-2748, and JTX-2748
Operating Instructions and Parts Manual PTX and JTX Series Pallet Trucks Models PTX-2036, PTX-2048, PTX-2748, and JTX-2748 For models with serial no. 11xx0001 and higher WALTER MEIER (Manufacturing) Inc.
More informationHAND PALLET TRUCK OPERATORS MANUAL
HAND PALLET TRUCK OPERATORS MANUAL Item # 10/16 2995 CLAY PIKE RILLTON, PA 15678 724-446-2000 1-800-868-5438 Fax: 724-446-0988 sales@herwin.biz www.palletsmith.com HAND PALLET TRUCK WARRANTY Palletsmith
More informationCONTENTS. Product Features and Specifications Installation Requirement Steps of Installation 4. Exploded View Test Run...
CONTENTS Product Features and Specifications... 1 Installation Requirement... 3 Steps of Installation 4 Exploded View... 14 Test Run... 16 Operation Instruction... 19 Maintenance... 20 Trouble Shooting...
More information