CATALOG SUPPLEMENT LITTLE CHAMP TM

Transcription

1 CTLOG SUPPLEMENT LITTLE CHMP TM ecause Continental Hydraulics is continually improving its products, specifications and appearance are subject to change without notice. Continental Hydraulics Division PolyPac Systems Center 5505 West 123rd Street 5505 West 123rd Street Savage, MN U.S.. Savage, MN U.S.. Phone: (952) Fax: (952) Phone: (952) Fax: (952) Form No Rev. 6/ Continental Hydraulics Printed in U.S.. 1

2 LITTLE CHMP TM 3 to 40 Gallon Capacity Little Champ TM Power Units are designed for use in locations where space is limited and larger noisier power units are not needed. They re ideal for applications requiring moderate fluid volume and flow rate, short hydraulic lines, and quick cycling. Typical applications include use with: Tilting and Dumping Equipment Optical Grinding Equipment Car Wash Equipment Machine Tools/Saws/Grinders Little Champ TM systems are ready to use, with all but the actuators plumbed. Little Champ TM Power Units are the perfect choice for applications involving frequent stops and starts, where localized power is needed, or where the noise and vibration of a larger power unit would be distracting. EXCLUSIVE 3 YER WRRNTY Continental Hydraulics Division warrants all hydraulic directional valves supplied by Continental Hydraulics against defects in materials and workmanship under normal use and service for 3 years from the date code on the valve. Complete terms and conditions available upon request. 2

3 LITTLE CHMP TM 3V and 5V Specifications and Features Floor Mounting Holes, Qty 4 Electric Motor Junction ox TEFC Frame Electric Motor Combination Filler/ir reather (10 Micron) Oil Level/Temperature Indicator In Protective luminum Housing Liquid Filled Pressure Gauge In Corrosion Resistant Housing, With built-in Snubber Pressure Gauge Snubber/Shut-Off Valve Two Optional Pressure Connections: 1.) "PR" lock -8 Female SE Pressure Port -8 Female SE Return Port 2.) Multi-Station D03 Manifold (4 Stations Max) -8 Female SE "" Port -8 Female SE "" Port Neoprene Channel Gasket, Keeps Dirt Out, Reduces Vibration PRT # GPM Return Filter With 25 PSI ypass In Head Return Plumbing Filter Condition Indicator 10 Micron Nominal Spin On Element Relief Valve PSI djustable (Standard On "PR" lock, nd Multi-Station Manifolds) Removable Top Plate 3/16" HRPO 1020 Steel Fixed Displacement Gear Pump Flexible Drive Couplings nd Pump/Motor dapter Inlet Plumbing Strainer Sized To Pass 2-3 Times Pump Maximum Minimum Pressure Drop 11 Ga. HRPO 1020 Steel 1/2" NPT Drain Plug 3

4 LITTLE CHMP TM 10V to 40V Specifications and Features Three Pressure Connection Options: 1.) "P"-Port -8 Male JIC 2.) "PR"-lock -8 Female SE Pressure Port -8 Female SE Return Port 3.) Multi-Station D03 Parallel Manifold (4 Stations Max) -8 Female SE "" Port -8 Female SE "" Port 12 Ga. HRPO 1020 Steel Filter Condition Indicator Relief Valve PSI djustable (Standard On "PR"-lock, Optional On Multi-Station Manifolds) TEFC C-face Electric Motor 13 GPM Return Filter/Filler reather With 25 PSI ypass (Remove Top nd Lift Element Out To Fill Reservoir) Liquid Filled Pressure Gauge In Corrosion Resistant Housing, With built-in Snubber Pressure Gauge Snubber/Shut-off Valve ir reather (10 Micron) Return Plumbing (Plumbed On "PR"-lock nd Multi-Station Manifolds) Electric Motor Junction ox Filter, 10 Micron Nominal Submerged Element Removable Top Plate (1/4" HRPO 1020 Steel) Pump Choices: Continental Hydraulics Pressure Compensated, Variable Volume Vane Pump Or Fixed Displacement Gear Pump Oil Level/Temperature Indicator In Protective luminum Housing Foam Gasket Keeps Dirt Out, Reduces Vibration Flexible Drive Couplings nd Pump/Motor dapter Inlet Plumbing 1/2" NPT Drain Plug Floor Mounting Holes, Qty 4 Strainer Sized To Pass 2-3 Times The Pump's Maximum Minimum Pressure Drop 4

5 LITTLE CHMP TM 3V ND 5V Ordering Code ONE ONE ONE ONE IF REQ D IF REQ D GER PUMP CODE MX. PUMP 1725 RPM PRESS. MOUNT MX. PRESS. PSI G SE- G SE- G SE- G SE- G SE- G SE- G SE- G SE- G SE- G SE- G SE- G SE- G SE- G SE- NOTE: Select gear pump as required from the appropriate Continental Hydraulic Catalog. ELECTRIC MOTOR CODE H.P. VOLTGE FRME 1800 RPM SIZE 005T S HZ 1 PH 007T S HZ 1 PH 010T S HZ 1 PH 015T S HZ 1 PH 020T T 3.0 NOTE: Maximum frame size: 143TC. RESERVOIR CODE GLLON SIZE 3V 3 5V 5 PRESSURE MNIFOLDS CODE PR V1R V2R V3R V4R DESCRIPTION PRESSURE LOCK W/UILT-IN RELIEF -8 SE; P & T SINGLE STTION D03 MNIFOLD UILT-IN RELIEF -8 SE; & TWO STTION D03 MNIFOLD UILT-IN RELIEF -8 SE; & THREE STTION D03 MNIFOLD UILT-IN RELIEF -8 SE; & FOUR STTION D03 MNIFOLD UILT-IN RELIEF -8 SE; & NOTE: Select directional control valves as required from the appropriate Continental Hydraulic Catalog. TYPICL ORDERING CODE: HET EXCHNGER CODE OPTION NO LNK COOLER IR TO OIL COOLER HE42R HE42R FOR -8 SE CODE LNK OPTION NO OPTIONS PRESSURE GUGE PSI -4 SE PRESSURE GUGE PSI -4 SE PRESSURE GUGE PSI -4 SE PRESSURE GUGE PSI -4 SE PRESSURE GUGE PSI -4 SE NEEDLE VLVE -4 SE 10 GPM 10 MICRON WITH INDICTOR G T-5V-V2R-G3N-FRC10 (POWER UNIT) VSD03M-3-G-60L (DIRECTIONL CONTROL VLVE) QTY. 2 F03MSV-NDC-G (FLOW CONTROL VLVE) QTY. 2 DO3-250 (OLT KIT) QTY. 2 G1 G1.5 G2 G3 G5 N FRC10 OPTIONS 5

6 LITTLE CHMP TM 3V/5V w/pressure lock Dimensions.44 (11.1) HOLES 4 PLCES 4.06 (103.1) (400.1) DIMENSIONS MOTOR CODE ±.125 (3.2 mm) 005T 9.92 (252.0) 005S (265.2) 007T 9.92 (252.0) 007S 9.92 (252.0) 010T 9.92 (252.0) 010S (277.4) 015T (277.4) 015S (329.7) 020T (304.3) 030T (339.6).42 (10.7) SQ. (257.3) (308.1) 2.56 (65.2) RESERVOIR 3V (316.0) 5V (417.6) MX. FRME SIZE - OPTIONL GUGE ND SNUER (450.9) OPTIONL 1.56 (39.6) + -8 SE PRESSURE ND PORTS (FEMLE) RELIEF VLVE PSI DJUSTLE FILLER- RETHER 3V SHOWN DRIN SIGHT GUGE.38 (9.5) (254.0) 9.25 (235.0).38 (9.5) (254.0) 9.25 (235.0) 1.18 (30.0) 6

7 LITTLE CHMP TM 3V/5V w/pressure lock Specifications and Schematic GENERL SPECIFICTIONS 3V 5V Reservoir Capacity 3 U.S. gal liters 5 U.S. gal liters Surface rea for Heat Transfer 2.22 sq. ft sq. cm 3.16 sq. ft sq. cm Heat Dissipation at ΔT = 50 F. (10 C.) 0.09 HP 0.12 HP asic Weight (less oil, pump and motor) 41 lbs kg 47 lbs kg Usable Gallons 2.02 gal. 7.6 liters 3.44 gal liters Gallons per Inch Rise (liters per 2.54 cm rise) 0.36 gal. 1.4 liters 0.36 gal. 1.4 liters Capacity, Full to Top Plate 4.37 gal liters 5.81 gal liters Capacity, High on Sight Gauge 2.91 gal liters 4.88 gal liters Capacity, Low on Sight Gauge 1.80 gal. 6.8 liters 3.78 gal liters Pump Data (See Pump Catalog for Complete Code and Specifications) Flow Range Pressure Range Power Range up to 8.7 gpm 32.9 lpm up to 3000 psi 207 bar up to 3 HP up to 8.7 gpm 32.9 lpm up to 3000 psi 207 bar up to 3 HP -8 SE PRESSURE ND PORTS OPTIONL GUGE ND SNUER P 1/2" OPTIONL RELIEF VLVE PSI DJUSTLE T 3/8" 1" DRIN 7

8 2500 LITTLE CHMP TM 3V/5V w/valve Manifold Dimensions.44 (11.1) HOLES 4 PLCES (400.1) DIMENSIONS MOTOR CODE ±.125 (3.2 mm) 005T 9.92 (252.0) 005S (265.2) 007T 9.92 (252.0) 007S 9.92 (252.0) 010T 9.92 (252.0) 010S (277.4) 015T (277.4) 015S (329.7) 020T (304.3) 030T (339.6) NO. OF C STTIONS (260.4) (314.5) (368.3) (422.4) 1.03 (26.2) SQ. (257.3) (308.1).42 (10.7) 2.78 (70.6) RESERVOIR 3V (316.0) 5V (417.6) RELIEF VLVE PSI DJUSTLE OPTIONL OPTIONL GUGE ND SNUER MX. FRME SIZE (54.1) TYP. D03 MOUNTING PTTERN C (488.9) -8 SE "" & "" PORTS + 3V SHOWN 1.56 (39.6) FILLER- RETHER DRIN SIGHT GUGE.38 (9.5) (254.0) 9.25 (235.0).38 (9.5) (254.0) 9.25 (235.0) 1.18 (30.0) 8

9 LITTLE CHMP TM 3V/5V w/valve Manifold Specifications and Schematic GENERL SPECIFICTIONS 3V 5V Reservoir Capacity 3 U.S. gal liters 5 U.S. gal liters Surface rea for Heat Transfer 2.22 sq. ft sq. cm 3.16 sq. ft sq. cm Heat Dissipation at ΔT = 50 F. (10 C.) 0.09 HP 0.12 HP asic Weight (less oil, pump and motor) 41 lbs kg 47 lbs kg Usable Gallons 2.02 gal. 7.6 liters 3.44 gal liters Gallons per Inch Rise (liters per 2.54 cm rise) 0.36 gal. 1.4 liters 0.36 gal. 1.4 liters Capacity, Full to Top Plate 4.37 gal liters 5.81 gal liters Capacity, High on Sight Gauge 2.91 gal liters 4.88 gal liters Capacity, Low on Sight Gauge 1.80 gal. 6.8 liters 3.78 gal liters Pump Data (See Pump Catalog for Complete Code and Specifications) Flow Range Pressure Range Power Range up to 8.7 gpm 32.9 lpm up to 3000 psi 207 bar up to 3 HP up to 8.7 gpm 32.9 lpm up to 3000 psi 207 bar up to 3 HP OPTIONL GUGE ND SNUER 1/2" RELIEF VLVE PSI DJUSTLE -8 SE "" & "" PORTS D03 PTTERN OPTIONL D03 PTTERN 1" 3/8" DRIN 9

10 LITTLE CHMP TM 10V - 40V ORDERING CODE ONE ONE ONE ONE IF REQ D IF REQ D * * * * * * * * PUMP MX. CODE 1725 RPM PRESS. MX. PRESS. PSI G G G G G G G G G G G G G G G G V V V V V * SE- pump mounting. SE- pump mounting. NOTE: Select pump as required from appropriate Continental Hydraulics Catalog. 10 RESERVOIR CODE GLLON SIZE 10V 10 20V 20 30V 30 40V 40 CODE H.P. 005T S T S T S T S T S T S T T T T T 20.0 ELECTRIC MOTOR TYPICL ORDERING CODE: VOLTGE FRME 1800 RPM SIZE 60 HZ 1 PH 60 HZ 1 PH 60 HZ 1 PH 60 HZ 1 PH 60 HZ 1 PH 145TC 60 HZ 1 PH 184TC 184TC 213TC 215TC 230/460V 254TC 230/460V 256TC MNIFOLDS CODE DESCRIPTION -8 JIC MLE P PRESSURE CONNECTION PRESSURE LOCK W/UILT-IN RELIEF PR -8 SE; P & T SINGLE STTION D03 MNIFOLD V1-8 SE; & SINGLE STTION D03 MNIFOLD V1R UILT-IN RELIEF -8 SE; & TWO STTION D03 MNIFOLD V2-8 SE; & TWO STTION D03 MNIFOLD V2R UILT-IN RELIEF -8 SE; & THREE STTION D03 MNIFOLD V3-8 SE; & THREE STTION D03 MNIFOLD V3R UILT-IN RELIEF -8 SE; & FOUR STTION D03 MNIFOLD V4-8 SE; & FOUR STTION D03 MNIFOLD V4R UILT-IN RELIEF -8 SE; & NOTE: Select directional control valves as required from the appropriate Continental Hydraulics Catalog. V T-20V-V2-G3N-FRIC13-EP-HE44C (POWER UNIT) VSD03M-3-G-60L (DIRECTIONL CONTROL VLVE) QTY. 2 F03MSV-NDC-G (FLOW CONTROL VLVE) QTY. 2 DO3-250 (OLT KIT) QTY. 2 HET EXCHNGER CODE OPTION LNK NO COOLER IR TO OIL COOLER HE44 FOR CSE HE44C DRIN -8 SE (CHD PVR6 ONLY) IR TO OIL COOLER HE41R HE41 FOR LINE -12 SE WTER TO OIL COOLER HEW11 HEW11R FOR LINE, OIL PORT 1 NPT WTER PORT OPTIONS CODE OPTION LNK NO OPTIONS PRESSURE GUGE G PSI -4 SE PRESSURE GUGE G PSI -4 SE PRESSURE GUGE G PSI -4 SE PRESSURE GUGE G PSI -4 SE PRESSURE GUGE G PSI -4 SE NEEDLE VLVE N -4 SE IN TNK, 13 GPM FRIC13 W/RETHER 10 MICRON WITH INDICTOR EXTERNL PRESS. EP* DJUSTMENT (VNE PUMP ONLY) EXTERNL VOLUME EV DJUSTMENT (VNE PUMP ONLY) CHECK VLVE CV08 INLINE -8 SE 5000 PSI RTED LEVEL LT TEMPERTURE SWITCH HETER TH F. DJUSTMENT * If EP is not selected, specify pressure setting. Pump requires volume control code 6 (PVR6-*-RF-0-6).

11 LITTLE CHMP TM 10-40V Dimensions 2.04 (51.8) 2.10 (53.3) SQ. (419.1) SQ. (457.2).56 (14.3) HOLES 4 PLCES 3.00 (76.2) 10V 1-1/4 NPT FULL COUPLING (NO DOWNPIPE, CN E USED FOR OR L/T RETHER REMOVE COVER ND ELEMENT TO FILL RESERVOIR 20V, 30V, 40V DIMENSIONS MOTOR CODE ±.125 (3.2 mm) 005T 9.92 (252.0) 005S (265.2) 007T 9.92 (252.0) 007S 9.92 (252.0) 010T 9.92 (252.0) 010S (277.4) 015T (277.4) 015S (329.7) 020T (304.3) 020S (329.4) 030T (339.6) 030S (366.2) 050T (382.5) 075T (446.0) 100T (446.0) 150T (585.0) 200T (585.0) FRME SIZE 213TC/215TC SHOWN OPTIONL GUGE ND SNUER -8 JIC MLE PRESSURE CONNECTION + OPTIONL 1.00 (25.4) 10V SHOWN 1.04 (26.4) 1.25 (31.7) 3.00 (76.2) MX. TYP. EXTERNL PRESSURE DJUSTMENT (OPTIONL ON VNE PUMPS) EXTERNL VOLUME DJUSTMENT (OPTIONL ON VNE PUMPS).75 (19.0) C D SIGHT GUGE DRIN F H G E DIMENSIONS RESERVOIR C D E F G H 10V (392.2) 9.50 (241.3) (444.5) (482.6) 1.25 (31.7) (355.6) (419.1) 20V (468.4) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 30V (671.6) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 40V (874.8) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 11

12 LITTLE CHMP TM 10V - 40V w/pressure Connection Specifications and Schematic GENERL SPECIFICTIONS 10V 20V 30V 40V Reservoir Capacity 10 gal. (37.8 liters) 20 gal. (75.7 liters) 30 gal. (113.6 liters) 40 gal. (151.4 liters) Surface rea for Heat Transfer 6.67 sq. ft. (.62 m 2 ) 8.75 sq. ft. (.81 m 2 ) sq. ft. (1.17 m 2 ) sq. ft. (1.54 m 2 ) sq. ft. of Vertical Steel x ΔT Heat Dissipation at ΔT = 50 F. (10 C.) HP Radiated From Reservoir = 1000 asic Weight (less oil, pump and motor) 77 lbs. (34.9 kg) 103 lbs. (46.7 kg) 120 lbs. (54.4 kg) 145 lbs. (65.8 kg) Usable Gallons 6.25 gal. (23.7 liters) gal. (60.6 liters) gal. (95.6 liters) gal.(138.2 liters) Gallons per Inch Rise (liters per 2.5 cm rise) 1.09 gal. (4.1 liters) 1.33 gal. (5.0 liters) 1.33 gal. (5.0 liters) 1.33 gal. (5.0 liters) Capacity, Full to Top Plate gal. (61.9 liters) gal. (90.6 liters) gal.(130.9 liters) gal.(171.2 liters) Capacity, High on Sight Gauge gal. (38.4 liters) gal. (78.0 liters) gal.(113.3 liters) gal.(156.1 liters) Capacity, Low on Sight Gauge 6.75 gal. (25.5 liters) gal. (62.9 liters) gal. (98.2 liters) gal.(141.0 liters) Pump Data (See Pump Catalog for Complete Code and Specifications) Flow Range Pressure Range Power Range up to 11 gpm (41.6 liters) up to 3000 psi (207 bar) up to 20 HP OPTIONL GUGE ND SNUER -8 JIC MLE -16 SE FEMLE OPTIONL 1/2" DRIN 12

13 bar 100xkPa psi LITTLE CHMP TM 10-40V w/pressure lock Dimensions -8 SE CONNECTION FEMLE -8 SE PRESSURE CONNECTION FEMLE 4.09 (103.9) 2.59 (65.8) OPTIONL GUGE ND SNUER RELIEF VLVE PSI DJUSTLE.53 (13.5) SQ. (419.1) SQ. (457.2) 10V.56 (14.3) HOLES 4 PLCES 1-1/4 NPT FULL COUPLING (NO DOWNPIPE, CN E USED FOR OR L/T RETHER REMOVE COVER ND ELEMENT TO FILL RESERVOIR 20V, 30V, 40V FRME SIZE 213TC/215TC SHOWN DIMENSIONS MOTOR CODE ±.125 (3.2 mm) 005T 9.92 (252.0) 005S (265.2) 007T 9.92 (252.0) 007S 9.92 (252.0) 010T 9.92 (252.0) 010S (277.4) 015T (277.4) 015S (329.7) 020T (304.3) 020S (329.4) 030T (339.6) 030S (366.2) 050T (382.5) 075T (446.0) 100T (446.0) 150T (585.0) 200T (585.0) 1.56 (39.6) + OPTIONL 10V SHOWN 1.04 (26.4) 3.00 (76.2) MX. TYP. EXTERNL PRESSURE DJUSTMENT (OPTIONL ON VNE PUMPS) EXTERNL VOLUME DJUSTMENT (OPTIONL ON VNE PUMPS).75 (19.0) C D SIGHT GUGE DRIN F H G E DIMENSIONS RESERVOIR C D E F G H 10V (392.2) 9.50 (241.3) (444.5) (482.6) 1.25 (31.7) (355.6) (419.1) 20V (468.4) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 30V (671.6) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 40V (874.8) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 13

14 LITTLE CHMP TM 10V - 40V w/pressure lock Specifications and Schematic GENERL SPECIFICTIONS 10V 20V 30V 40V Reservoir Capacity 10 gal. (37.8 liters) 20 gal. (75.7 liters) 30 gal. (113.6 liters) 40 gal. (151.4 liters) Surface rea for Heat Transfer 6.67 sq. ft. (.62 m 2 ) 8.75 sq. ft. (.81 m 2 ) sq. ft. (1.17 m 2 ) sq. ft. (1.54 m 2 ) Heat Dissipation at ΔT = 50 F. (10 C.) sq. ft. of Vertical Steel x ΔT HP Radiated From Reservoir = 1000 asic Weight (less oil, pump and motor) 77 lbs. (34.9 kg) 103 lbs. (46.7 kg) 120 lbs. (54.4 kg) 145 lbs. (65.8 kg) Usable Gallons 6.25 gal. (23.7 liters) gal. (60.6 liters) gal. (95.6 liters) gal.(138.2 liters) Gallons per Inch Rise (liters per 2.5 cm rise) 1.09 gal. (4.1 liters) 1.33 gal. (5.0 liters) 1.33 gal. (5.0 liters) 1.33 gal. (5.0 liters) Capacity, Full to Top Plate gal. (61.9 liters) gal. (90.6 liters) gal.(130.9 liters) gal.(171.2 liters) Capacity, High on Sight Gauge gal. (38.4 liters) gal. (78.0 liters) gal.(113.3 liters) gal.(156.1 liters) Capacity, Low on Sight Gauge 6.75 gal. (25.5 liters) gal. (62.9 liters) gal. (98.2 liters) gal.(141.0 liters) Pump Data (See Pump Catalog for Complete Code and Specifications) Flow Range Pressure Range Power Range up to 11 gpm (41.6 liters) up to 3000 psi (207 bar) up to 20 HP OPTIONL GUGE ND SNUER 3/4" -8 SE PRESSURE ND PORTS P RELIEF VLVE PSI DJUSTLE T OPTIONL 1/2" DRIN 14

15 LITTLE CHMP TM 10-40V w/valve Manifold Dimensions OPTIONL RELIEF VLVE PSI DJUSTLE 1.84 (46.7).59 (15.0) 2.94 (74.7) 1.19 (30.2) (419.1) SQ (457.2) SQ..56 (14.3) HOLES 4 PLCES 10V 1-1/4 NPT FULL COUPLING (NO DOWNPIPE, CN E USED FOR OR L/T RETHER REMOVE COVER ND ELEMENT TO FILL RESERVOIR 20V, 30V, 40V NO. OF STTIONS (260.4) (314.5) (368.3) (422.4) DIMENSIONS MOTOR CODE ±.125 (3.2 mm) 005T 9.92 (252.0) 005S (265.2) 007T 9.92 (252.0) 007S 9.92 (252.0) 010T 9.92 (252.0) 010S (277.4) 015T (277.4) 015S (329.7) 020T (304.3) 020S (329.4) 030T (339.6) 030S (366.2) 050T (382.5) 075T (446.0) 100T (446.0) 150T (585.0) 200T (585.0) D03 MOUNTING PTTERN OPTIONL GUGE ND SNUER -8 SE "" & "" PORTS FEMLE FRME SIZE 213TC/215TC SHOWN 2.13 (54.1) TYP. + C OPTIONL 10V SHOWN 1.58 (40.1) 1.04 (26.4) C 3.00 (76.2) MX. TYP. EXTERNL PRESSURE DJUSTMENT (OPTIONL ON VNE PUMPS) EXTERNL VOLUME DJUSTMENT (OPTIONL ON VNE PUMPS).75 (19.0) D E SIGHT GUGE DRIN G I H F DIMENSIONS RESERVOIR C D E F G H I 10V (392.2) 9.50 (241.3) (444.5) (482.6) 1.25 (31.7) (355.6) (419.1) 20V (468.4) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 30V (671.6) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 40V (874.8) (260.3) (482.6) (520.7() 1.50 (38.1) (381.0) (457.2) 15

16 LITTLE CHMP TM 10V - 40V w/valve Manifold Specifications and Schematic GENERL SPECIFICTIONS 10V 20V 30V 40V Reservoir Capacity 10 gal. (37.8 liters) 20 gal. (75.7 liters) 30 gal. (113.6 liters) 40 gal. (151.4 liters) Surface rea for Heat Transfer 6.67 sq. ft. (.62 m 2 ) 8.75 sq. ft. (.81 m 2 ) sq. ft. (1.17 m 2 ) sq. ft. (1.54 m 2 ) sq. ft. of Vertical Steel x ΔT Heat Dissipation at ΔT = 50 F. (10 C.) HP Radiated From Reservoir = 1000 asic Weight (less oil, pump and motor) 77 lbs. (34.9 kg) 103 lbs. (46.7 kg) 120 lbs. (54.4 kg) 145 lbs. (65.8 kg) Usable Gallons 6.25 gal. (23.7 liters) gal. (60.6 liters) gal. (95.6 liters) gal.(138.2 liters) Gallons per Inch Rise (liters per 2.5 cm rise) 1.09 gal. (4.1 liters) 1.33 gal. (5.0 liters) 1.33 gal. (5.0 liters) 1.33 gal. (5.0 liters) Capacity, Full to Top Plate gal. (61.9 liters) gal. (90.6 liters) gal.(130.9 liters) gal.(171.2 liters) Capacity, High on Sight Gauge gal. (38.4 liters) gal. (78.0 liters) gal.(113.3 liters) gal.(156.1 liters) Capacity, Low on Sight Gauge 6.75 gal. (25.5 liters) gal. (62.9 liters) gal. (98.2 liters) gal.(141.0 liters) Pump Data (See Pump Catalog for Complete Code and Specifications) Flow Range Pressure Range Power Range up to 11 gpm (41.6 liters) up to 3000 psi (207 bar) up to 20 HP OPTIONL GUGE ND SNUER 3/4" OPTIONL RELIEF VLVE PSI DJUSTLE D03 PTTERN -8 SE "" & "" PORTS D03 PTTERN OPTIONL 1/2" DRIN 16