Gripper A F , 2 5, 3 0, 4 0, 5 0, 6 3, 9 0, Wedge type Base jaw Kinetics Mounting and positioning Precise T-slot guide Body Drive
|
|
|
- Brandon McDonald
- 6 years ago
- Views:
Transcription
1 Gripper AF30-20,25,30,40,,63,90,125 Character Compact structure by wedge guide driving unit Location pin hole at an each mounting side Possible to use without the supply tube when you use back side support port(bp option) Proximity sensor is available for open-close sensing Wedge type Base jaw for fitting the workpiece specific gripper fingers Kinetics wedge system for high level of power transmission and centric gripping Precise T-slot guide high force and moment absorption Drive double acting pneumatic cylinder Mounting and positioning mounting possible from several sides for versatile positioning Body high-tensile aluminum body with lightest possible because of hard anodizing 106
2 Exploded view Dust Cover Plunger Rod Packing Master Jaw Gripper Body Sensor Bracket O-Ring Piston Packing Piston Gasket End Cover Wrench Bolt 107
3 Ordering Code Product ame AF30 - Standard (Aluminum body) * Option HF30 - Low hydraulic type ( less than 10bar ) (Aluminum body,hydraulic seal) Product Type omark - Dual action Type (Standard) O - ormal Open C - ormal Close -For O, C type consult JRT Sensor Cable Length omark - 1m 3M - 3m Stroke Option omark - Standard S12 - Stroke 12 - Stroke dimension is both side - Stroke option for an increases consult JRT HFS30 - Low hydraulic type ( less than 20bar ) (Steel body,hydraulic seal) AF30-30 BP - O - PS 2-1M - S12 - HT * * Bore Size 20, 25, 30, 40,,63,90, Sensor Quantity 1-1ea 2-2ea Port Option omark - Standard BP - Bottom side Air Port Sensor Type PS - Proximity sensor (P) 8x30 PSP - Proximity sensor (PP) 8x30 PSS - Proximity sensor (P) 8x16 PSSP - Proximity sensor (PP) 8x16 PSL - Proximity sensor (P) 12x46 Only AF ) PSLP - Proximity sensor (PP) 12x46 Only AF ) Sealing Option omark - Standard (for general pneumatic seal) HT - High temperature sealing sets ( -10 to 120 ) - For high temperature sealing, consult JRT The delivery of * mark option is longer than a standard, So inquire of JRT 108
4 Specification P=Air Pressure[bar], L=Exertion length[] Products ame AF30-20 AF30-25 AF30-30 AF30-40 Unit Stroke Weight kg Max. length of attach Fitting size M5 M5 M5 PF(G) 1/8 Gripping force:open 28.45P/(1+0.16L) 43.16P/(1+0.12L) 62.78P/(1+0.09L) P/(1+0.07L) Gripping force:close 25.51P/(1+0.16L) 39.24P/(1+0.12L) 55.92P/(1+0.09L) 99.08P/(1+0.07L) Air consumption per cycle Closing / Opening time * Repeat accuracy Max.cycle per minute / / / / cm 3 sec Operating pressure Ambient temperature Lubrication 3~7-5 to 60 eedless bar * After consecutive strokes to end positions P=Air Pressure[bar], L=Exertion length[] Products ame AF30- AF30-63 AF30-90 AF Unit Stroke Weight 1.37 Max. length of attach Fitting size PF(G) 1/8 Gripping force:open P/(1+0.06L) Gripping force:close P/(1+0.06L) Air consumption per cycle 59.6 Closing / Opening time 0.06 / 0.06 * Repeat accuracy 0.02 Max.cycle per minute 40 Operating pressure Ambient temperature Lubrication * After consecutive strokes to end positions 2.6 PF(G) 1/ P/(1+0.05L) P/(1+0.05L) / ~7-5 to 60 eedless PF(G) 1/8 PF(G) 1/ P/(1+0.04L) P/(1+0.03L) P/(1+0.04L) P/(1+0.03L) / / kg cm 3 sec bar 109
5 AF30-20(OPE) AF30-25(OPE) AF30-30(OPE) AF30-20(CLOSE) AF30-25(CLOSE) AF30-30(CLOSE) 0 1 5cm 3cm 1cm 0 1 5cm 3cm 1cm cm 3.6cm 1.2cm 1 2 6cm 3.6cm 1.2cm cm 4.62cm 1.54cm cm 4.62cm 1.54cm AF30-40(OPE) AF30-(OPE) AF30-63(OPE) AF30-40(CLOSE) AF30-(CLOSE) AF30-63(CLOSE) cm 6cm 2cm cm 6cm 2cm cm 7.62cm 2.54cm cm 7.62cm 2.54cm cm 9.6cm 3.2cm cm 9.6cm 3.2cm AF30-90(OPE) AF30-90(CLOSE) AF30-125(OPE) AF30-125(CLOSE) cm 12cm 4cm cm 12cm 4cm cm 14.4cm 4.8cm cm 14.4cm 4.8cm Legend : 7[bar] [bar] [bar 110 Gripping Force per exertion length
6 AF30-20 M4 BACK/SIDE(DP10) M4 BACK/SIDE(DP10) SESOR (JPM8) SESOR (JPM8S) DIMESIO 2-M3 AF30-25 M5 BACK/SIDE(DP24.5) M5 BACK/SIDE(DP17) SESOR (JPM8S) SESOR (JPM8) BP OPTIO DIMESIO 2-M3 111
7 AF30-30 M5 BACK/SIDE(DP18) M5 BACK/SIDE(DP27) SESOR (JPM8S) SESOR (JPM8) BP OPTIO DIMESIO AF30-40 M6 BACK/SIDE(DP25) M6 BACK/SIDE(DP31) SESOR (JPM8S) SESOR (JPM8) 2-PF(G)1/8 BP OPTIO DIMESIO 112
8 AF30- M8 BACK/SIDE(DP20) M8 BACK/SIDE(DP30) SESOR (JPM8S) SESOR (JPM8) 2-PF(G)1/8 BP OPTIO DIMESIO AF30-63 M8 BACK/SIDE(DP20) M8 BACK/SIDE(DP35) SESOR (JPM8) 2-PF(G)1/8 BP OPTIO DIMESIO 113
9 AF30-90 M10 BACK/SIDE(DP20) M12 BACK/SIDE(DP25) PF(G)1/8 BP OPTIO DIMESIO SESOR (JPM8) AF PF(G)1/4 BP OPTIO DIMESIO SESOR (JPM12) 2-10 dp16 114
10 otes 115
Mechanical Gripper MF16 (Mechanical Type) About the product. 2 Finger Parallel Grippers. Centric Grippers. Angular Grippers. Air Chuck.
Gripper About the product 2 Finger Parallel Grippers AF101 (Rack & Pinion Type) AF02 (Rack & Pinion Type) AF04P (Link Lever Type) AF105P (Roller Guide Type) AF10 (Rack & Pinion Type) AF13 (Rack & Pinion
Port Rc(PT), G, NPT M5 M5 1/8" 1/8" 1/8" Stroke mm 2 ~ 6 2 ~ 8 2 ~ 10 2 ~ 13 2 ~ 16. Air Consumption cc/cycle
2GN Parallel gripper with 2 jaws Features Wedge type, 2-Jaw parallel gripper Improved stability with longer gripping point between jaw & plunger Improved function, sti ness and outer look Made with flexible
RZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
NOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
Gripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
Precise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
Parallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
Product Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
PZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
Parallel Grippers. Features. Operation. Contents. Mounting
Catalog 9-2/US Features Dowel Pin Holes Slip fit dowels located in gripper body and jaws. Body One piece hard coat anodized aluminum body with Teflon impregnation. Seals Self lubricating dynamic seals
PGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
ANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
WIDE OPENING PARALLEL GRIPPER
News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has
PWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
PWG. Application example. Pneumatic 2-Finger Angular Grippers Universal Angular Grippers. Sizes Gripping moment 6 Nm..
PWG Sizes 65.. 230 Weight 0.33 kg.. 16.3 kg Gripping moment 6 Nm.. 934 Nm Opening angle per finger 20 Workpiece weight 1.1 kg.. 43 kg Application example Rotary feed unit for shafts PWG 130-B 2-Finger
Product Information. Rotary gripping module with angular gripper RW
Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and
Parallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
PGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
Compact. Flat. Productive. Compact Change System CWS
CWS Compact. Flat. Productive. Compact Change System CWS Compact manual change system with integrated air feed-through for the most important SCHUNK gripping and compensating modules. Field of Application
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit
AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
Product Information. Gripper for small components RH 9010
Product Information RH 9010 RH cost-effective. Easy. Economical. RH gripper for small components The RH series is a cost-efficient gripping system, which is particularly suitable for simple cases of application.
ROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
Through Hole Parallel Gripper PPC Series
ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications
Separators. pneumatic
Separators pneumatic Table of contents separators VEG-B Order no. Stroke Force in Force in Page [mm] retract [N] extend [N] Product Information 6 VEG10-B 10 30 40 10 VEG14-B 20 65 80 12 VEG15-B 40 65
-U- Type discontinued. -H- Note. Available up until Angle grippers HGW Key features. 2 Internet:
Key features At a glance Double-acting piston drive Self-centring Variable gripping action: External/internal gripping Versatility thanks to externally adaptable gripper fingers Wide range of options for
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction. Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
AGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
Long stroke grippers HGPL
Sturdy Gripping forces of up to 754 N Reliable Space saving 2004/10 Subject to change Products 2004/2005 1 / 3 Key features At a glance Space saving and suitable for high forces Two parallel and opposing
Parallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
KONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
pneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
Modular. Compact. Loadable. HLM Stroke Module
HLM Modular. Compact. Loadable. HLM Stroke Module Linear module with optimized overall length, pneumatic drive and scope-free pretensioned junction rollers. Field of Application For lifting of workpieces
Light. Fast. Flexible. SGW Small Components Gripper
SGW Light. Fast. Flexible. SGW Small Components Gripper Small, simple pressurised plastic angular gripper with spring return Field of Application Universal application in clean and slightly dirty environments,
GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
HFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm.
FH0 G B FH0 G A S F J H2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke
Standard gripper Series GSP
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Standard gripper Series GSP Technical Data Products Series GSP-P
AGE-XY. Application example. Compensation XY Compensation Units Light Loads. Workpiece weight 4 kg.. 10 kg. Sizes 050..
AGE-XY Sizes 050.. 080 Workpiece weight 4 kg.. 10 kg Compensation paths XY ± 2.5 mm.. ± 4 mm Rotation ± 12.. ± 16 Application example Insertion unit for assembling a pin in a bore, in an approximately
Number of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
Parallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
PNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
SRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
Lateral parallel hand Double acting. Operational stroke length: 20, 30, 40mm. 980m/s2
FH0 G G B H2 LB2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
GC-45. Description. Seals. Viton High Temperature
DG/G Series 2-Jaw Precision Parallel Grippers Features and Benefits How o Order Features: Rugged, high precision long stroke gripper High impact resistant with double wedge design Versatile mounting on
SKE. Application example. Pneumatic Swivel Heads Universal Swivel Head. Torque 0.4 Nm Nm. Sizes Weight 0.13 kg.. 1.
SKE Sizes 18.. 55 Weight 0.13 kg.. 1.95 kg Axial force 140 N.. 2560 N Torque 0.4 Nm.. 9.0 Nm Bending moment 7.0 Nm.. 128 Nm Application example Robot gripper module for the removal and loading of a variety
RUA-112M. Description. Spring. Blank None. Spring Closed Spring Open RE RI Inductive Case Description
RUA Series Angular Grippers Features and Benefits How To Order Features: Robust, shielded, high force gripper Optional springs for part retention in case of air loss or increased grip-force Side or top
Product Information. Gripper change system GWS
Product Information GWS GWS Flat. Robust. Strong. GWS gripper change system pneumatic gripper change system Field of application Fast conversion of production lines for other products; the use of various
Product Information. Anti-collision and overload protection sensor OPR
Product Information OPR OPR Compliant. Highly responsive. Automatic reset. OPR collision and overload sensor Collision and overload protection with automatic reset for protecting robots and handling units
-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
Flexible. Light. Productive. LEG Long-stroke Gripper
LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,
Flexible. Modular. Strong. SWS-L Quick-change System
Flexible. Modular. Strong. SWS-L Quick-change System P neumatic tool changing system with patented locking system for heavy loads. Field of Application C an be used wherever short changeover times between
OKLADKA ROZDZIALU 2405-K
OKLADKA ROZDZIALU 0-K POWER CHUCKS AND HYDRAULIC CYLINDERS POWER CHUCKS AND HYDRAULIC CYLINDERS HARD TOP JAW ADAPTER PLATE DRAW NUT WEDGE NUT BODY T-NUT BISON s -, - and -jaw Power Chucks as well as our
SFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
Grippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
bl 8 bm 1Robust, lightweight housing - hard coated aluminium alloy
2-Jaw Parel Series GP4X pneumatic Product information: Overlapping, extremely robust T-Slot guide for maximum force and moment resistance Gripper jaws made of ground surfaced and hardened steel ensuring
SRM Universal Rotary Actuator. The pneumatic Rotary Actuator with the greatest Power Density on the Market
SRM Universal Rotary Actuator The pneumatic Rotary Actuator with the greatest Power Density on the Market SRM Universal Rotary Actuator. Maximum Power Density. Large Through Bore. Maximum Flexibility.
-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
Modular. Robust. Flexible. SWS Quick-change system
SWS Modular. Robust. Flexible. SWS Quick-change system Pneumatic tool changing system with patented locking system. Field of Application C an be used wherever short changeover times between a handling
Parallel grippers HGP, with protective dust cap
Key features At a glance Double-acting piston drive With protective dust cap for use in dusty environments (protection class IP54) Self-centring Variable gripping action: External/internal gripping High
HEP Series. Specifications. Switch specifications. Bearing parallel hand Double acting/single acting. Operational stroke length: 24, 36, 40, 50, 60mm
FH0 G G B FH0 G S F J H2 LB2 N/ S/F Specifications Descriptions Size Cylinder bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa mbient temperature C Port size Operational
Specifications MHC2-10D MHC2-16D MHC2-20D MHC2-25D MHC2-10S. Double acting MHC2-16S. Single acting MHC2-20S MHC2-25S. Angular style air gripper
Angular Style Air Gripper Standard Type Series MHC2 Size: 10, 16, 20, 25 A large amount of gripping force is provided through the use of a double piston mechanism, while maintaining a compact design. Built-in
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
Angular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
Parallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
grippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
Grippers for Specific Tasks: O-Ring Assembly Grippers Internal Grippers
Grippers for Specific Tasks: O-Ring Assembly Grippers Internal Grippers Highlights Drive three single-acting pneumatic cylinders every cylinder is driven via a 5/ way valve retraction via spring Guide
LEG. Application example. Electrical 2-Finger Parallel Gripper Long-stroke Gripper. Gripping force 1050 N 1500 N. Weight 9 kg 11.
LEG www.comoso.com Size 760 Weight 9 kg 11.6 kg Gripping force 1050 N 1500 N Stroke per finger 281 mm Workpiece weight 15.75 kg 22.5 kg Application example Gripping unit for top loading and palettizing
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
Wedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel
Wedge Cam Operation Slide Guide Air Gripper/2-inger Type ø2, ø, ø, ø2 MH MH oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials Standard: Carbon
Compressed air to
G G A S F J 2 N/ S/F Specifications escriptions Cylinder bore size Working fluid mm Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm Rod
Precise. Modular. Compact. CLM Compact Slides
CLM Precise. Modular. Compact. CLM Compact Slides Optimized length, with pneumatic drive and pre-loaded crossed roller bearings, free from play. Field of Application For use in assembly automation; e.g.
KLM. Application example. Linear modules Pneumatic Stroke module. 1 Single base support, SOE Adapter plate, APL 121
KLM www.comoso.com Sizes 25.. 100 Mass 0.5 kg.. 5.18 kg Driving force 50 N.. 294 N Stroke 25 mm.. 225 mm Repeat accuracy ± 0.01 mm.. ± 0.015 mm Application example 4 5 3 3 6 7 2 2 8 1 1 Pneumatic two-axis
Product Information. Compact linear module ELS
Product Information ELS ELS Modular. Compact. Precise. ELS compact linear module with spindle drive and profiled rail guide Field of application For use in clean and slightly polluted environments. Simple
SRH. Application example. Pneumatic Swivel Heads Universal Swivel Head. Weight 2.1 kg kg. Axial force 800 N..
SRH www.comoso.com Sizes 20.. 60 Weight 2.1 kg.. 21.2 kg Axial force 800 N.. 9000 N Torque 3.0 Nm.. 69.9 Nm Bending moment 10.4 Nm.. 340 Nm Application example Swivel head for the rapid loading and unloading
IDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
GRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
How to Order M9BW. Action. Double acting Single acting. Load voltage Electrical entry direction M9NWV M9NW 12 V 5 V, M9BWV M9BW 12 V 12 V
Angular Type Air Gripper/Standard Type 2 Series ø, ø1, ø20, ø25 How to Order Angular type air gripper 2 20 Bore size mm 1 1 mm 20 20 mm 25 25 mm D S Action D Double acting Single acting M9BW Made to Order
22mm. Compact Guide Cylinder (Basic type) New. Up to. Series MGP. Weight reduced!
1-161 Compact Guide Cylinder (Basic type) ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Up to 17% Weight reduced! New Weight reduced by up to 17% with a shorter guide rod and thinner plate Guide rod
LOW PROFILE PNEUMATIC PARALLEL GRIPPER
LOW PROFILE PNEUMATIC PARALLEL GRIPPER Major Benefits Large hardened jaw drivg surfaces Low profile Two jaw travels per size Manifold portg options Four bore sizes with five gripper sizes available both
Three-point grippers DHDS
Key features At a glance General information Flexible range of applications Resilient and precise T slot guide of the gripper jaws High gripping forces with compact dimensions Gripper jaw centring options
Parallel Grippers- Miniature Series
RPM SERIES 1.16 Parallel Grippers- Miniature Series Precision applications: Preloaded dual- V roller bearings eliminate side play for excellent part position repeatability. Miniature size: Compact design
Magnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1
NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need
PED Pneumatic Escapement Modules Double Escapement Sizes Weight Advancing force Stroke Bending moment
PED www.comoso.com Sizes 60.. 96 Weight 0.34 kg.. 2.52 kg Advancing force 83 N.. 265 N Stroke 15 mm.. 60 mm Bending moment 5 Nm.. 10 Nm Application example Combined magazining/separating/feed application
WG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
Compliant. Precise. Reliable. FUS Insertion Unit
FUS Compliant. Precise. Reliable. FUS Insertion Unit Symmetrical insertion unit with centric locking and monitoring. Field of Application Assembly tasks with very little play among the parts to be aligned
Double Acting Spring Assist
1.144 RPS Spring Assist 2-Jaw Parallel Grippers Patented double wedge design: his gripper utilizes our patented double wedge design for actuation and synchronization. Fail safe operation: he force supplied
Compact. Fast. Productive. DRL Lift/Swivel Unit
DRL Compact. Fast. Productive. DRL Lift/Swivel Unit Compact lift/swivel unit consisting of a strong short-stroke cylinder and a rack pinion swivel drive. Field of Application For use in clean and slightly
Angular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
GWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm
GWS Sizes 064.. 125 Handling weight up to 170 kg Moment load M x up to 400 Nm Moment load M y up to 400 Nm Moment load M z up to 600 Nm Application example Replacing and placing tools in a gripper changing
Parallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
GPAL Automotive Grippers Twice the Force Harsh Environment Ready Half the Weight
GPAL Automotive Grippers Twice the Force Harsh Environment Ready Half the Weight The GPAL Series of parallel grippers represents a pinnacle in parallel gripper development. This 5 th generation ZAYTRA
AG Series Angular Grippers
AG Series Angular Grippers www.numatics.com Table of Contents AG Series Angular Grippers Features and Benefits 3 How to Order 4 Dimensions 5 Specifications and Load Ratings 6 Sensing Part Numbers 7 Quick
Cost effective. Productive. Compliant. GSW-M Magnetic Gripper
Cost effective. Productive. Compliant. Magnetic Gripper Vacuum gripper for spindle interfaces is ideal for handling flat components. Field of Application Unit for automatic loading and unloading of machining
Parallel grippers HGPC
Key features At a glance General The compact and low-cost parallel gripper consists of a two-part symmetrical housing. The piston moves traverse to the half-shell casing in an optimum housing design that
Needle Grippers. Needle Grippers SNG-AP
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Gripping SNG-AP Needle stroke max. 3 mm to max. 20 mm (variable) Needle grippers
Short-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread
: - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal 1 Compressed air connection Internal Ambient temperature min./max. -25 C / +80 C Medium temperature min./max.