Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat. Cowl Kit Panels between the firewall and front door of the vehicle.

Transcription

1 GMA Catalog Chevelle GTO Cutlass Skylark Monte Carlo Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat Reduce Road Noise Reduce Exhaust Harmonics Eliminate Mechanical Noise Stop Body Panel Vibration Reduce Radiated & Reflected Heat Stop Audio System Vibration Pre-Cut Ready to Install Kits Year Make Model Specific The Coolest Cars Have QuietRIDE Inside! Kits are available for these Vehicles See AcoustiHood Catalog Kits are available for these Vehicles See AcoustiTrunk Catalog Trunk Floor & Tire Well Roof Kit Roof & Quarter Panels above beltline. (Sold Separately) Firewall Insulator Fits under dash against the firewall bulkhead. All Panels below the beltline including Package Tray, Seat Divider, Rear Wheel Wells, Fenders, Rear Quarters and Tail Panels (As Required) Door Kit All Doors Floor Kit Front Floor, Rear Floor, Transmission Hump/ Driveline Panels between the firewall and front door of the vehicle. Everything in One Box to Do the Job Right! Pre-Cut, Ready To install Kits are Year, Make and Model Specific and include: Dynamat Xtreme Heat Shield Barrier Insulation Spray Adhesive Seam Tape Illustrated Instructions For more information contact us at: Prices Subject to Change Without Notice Order Line: Tech Line: Fax: Pacific Ave. Ste. #334 Stockton, CA 95207

2 GM-A Body Chevelle GTO Cutlass Skylark Monte Carlo Automotive Thermal Acoustic Insulation Pre Cut Kits Ready to Install Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat Introducing a multi-stage, automotive insulation and sound damping system to give GM-A or GM- G cars the quiet riding comfort found in today s new cars. AcoustiSHIELD kits are designed on cur-rent state-of-the-art auto acoustic technology, to insulate and control the noise, vibration and heat in the passenger cabin. Kits are pre-cut and come with easy-to-follow installation instructions-----everything you need to do the job right. Turn Your GM-A or GM-G into Quiet Riding Comfort Stage 1 Sound Damper Pads Stage 2 Heat Absorber/Barrier Panels The first stage consists of pre-trimmed, self-adhesive, Sound Damper Pads, bonded to strategically located trouble spots on the floor pan and roof of the vehicle to control body panel vibration and noise. These spots are mapped and labeled in detailed instructions which are included in the kit. Kits Include: Stage 1 Pre-Sized Sound Damper Pads Stage 2 Pre-Trimmed Heat Absorber / Barrier Panels, Spray Adhesive and Sealing Tape Complete Illustrated Installation Instruction Dealer program available. For more information contact us at info@quietride.com Quiet Ride Solutions Prices Subject to Change Without Notice The second stage uses a high-tech absorber/barrier material, bonded to the body panels, to both sound deaden and insulate the vehicle from radiant heat penetration from the engine and road. Each absorber panel is cut to the correct shape and contour and is mapped and labeled in the detailed instructions Order Line: Tech Line: Fax: Pacific Avenue Ste. 334 Stockton, CA 95207

3 GM A-Body Coupe GMA 6465-CAK GMA Coupe Complete Kit 812 GMA 6465-CBPK GMA Coupe Body Panel Insulation Kit 145 GMA 6465-CCK GMA Coupe Cowl Insulation Kit 101 GMA 6465-CFK GMA Coupe Floor Insulation Kit 260 GMA 6465-CRK GMA Coupe Roof Insulation Kit 145 GMA 6465-CTK GMA Coupe Trunk Insulation Kit GM A-Body Convertible GMA 6465-CVAK GMA Convertible Complete Kit 678 GMA 6465-CVBPK GMA Convertible Body Panel Insulation Kit 145 GMA 6465-CVCK GMA Convertible Cowl Insulation Kit 101 GMA 6465-CVFK GMA Convertible Floor Insulation kit 260 GMA 6465-CVTK GMA Convertible Trunk Insulation Kit 145 Other Parts For GMA Vehicles GMA 6467-HC GM A-Body & El Camino Firewall Insulator Heater 195 GMA 6467-AC GM A-Body & El Camino Firewall GM A-Body Coupe GMA 6667-CAK GMA Coupe Complete Kit 812 GMA 6667-CBPK GMA Coupe Body Panel Insulation Kit 145 GMA 6667-CCK GMA Coupe Cowl Insulation Kit 101 GMA 6667-CFK GMA Coupe Floor Insulation Kit 260 GMA 6667-CRK GMA Coupe Roof Insulation Kit 145 GMA 6667-CTK GMA Coupe Trunk Insulation Kit 145 GMA 6467-DDBIK GMA 2- Two-Doors GM A-Body Convertible GMA 6667-CVAK GMA Convertible Complete Kit 678 GMA 6667-CVBPK GMA Convertible Body Panel Insulation Kit 145 GMA 6667-CVCK GMA Convertible Cowl Insulation Kit 101 GMA 6667-CVFK GMA Convertible Floor Insulation Kit 260 GMA 6667-CVTK GMA Convertible Trunk Insulation Kit 145 Other Parts For GMA Vehicles GMA 6467-HC GM A-Body & El Camino Firewall Insulator Heater 195 GMA 6467-AC GM A-Body & El Camino Firewall GM A-Body Coupe GM-A Body Pre Cut Kits Ready to Install Product Application Codes and Price Sheet GMA 6872-CAK GMA Coupe Complete Kit 812 GMA 6872-CBPK GMA Coupe Body Panel Insulation Kit 145 GMA 6872-CCK GMA Coupe Cowl Insulation Kit 101 GMA 6872-CFK GMA Coupe Floor Insulation Kit 260 GMA 6872-CRK GMA Coupe Roof Insulation Kit 145 GMA 6872-CTK GMA Coupe Trunk Insulation Kit GM A-Body Convertible GMA 6872-CVAK GMA Convertible Complete Kit 678 GMA 6872-CVBPK GMA Convertible Body Panel Insulation Kit 145 GMA 6872-CVCK GMA Convertible Cowl Insulation Kit 101 GMA 6872-CVFK GMA Convertible Floor Insulation Kit 260 GMA 6872-CVTK GMA Convertible Trunk Insulation Kit 145 Other Parts For GMA Vehicles GMA 6872-AC GM A-Body & El Camino AC Firewall Insulator 195 GMA 6872-HC GM A-Body & El Camino Heater Firewall Insulator GM A-Body Coupe GMA 7377-CAK GMA Coupe Complete Kit 812 GMA 7377-CBPK GMA Coupe Body Panel Insulation Kit 145 GMA 7377-CCK GMA Coupe Cowl Insulation Kit 101 GMA 7377-CFK GMA Coupe Floor Insulation Kit 260 GMA 7377-CRK GMA Coupe Roof Insulation Kit 145 GMA 7377-CTK GMA Coupe Trunk Insulation Kit GM A-Body Convertible GMA 7377-CVAK GMA Convertible Complete Kit 678 GMA 7377-CVBPK GMA Convertible Body Panel Insulation Kit 145 GMA 7377-CVCK GMA Convertible Cowl Insulation Kit 101 GMA 7377-CVFK GMA Convertible Floor Insulation Kit 260 GMA 7377-CVTK GMA Convertible Trunk Insulation Kit 145 Other Parts For GMA Vehicles GMA 7377-AC GM A-Body & El Camino Firewall Factory AC GM G-Body Coupe For more information visit: or contact us at GMG 7888-CAK GM G-body Coupe Complete Kit 812 GMG 7888-CBPK GM G-Body Coupe Body Panel Insulation Kit 145 GMG 7888-CCK GM G-Body Coupe Cowl Insulation Kit 101 GMG 7888-CFK GM G-Body Coupe Floor Insulation Kit 260 GMG 7888-CRK GM G-Body Coupe Roof Insulation Kit 145 GMG 7888-CTK GM G-Body Coupe Trunk Insulation Kit 145 Other Parts For GMA Vehicles GMG 7888-AC GM A-Body Firewall 240

4 Firewall Insulator Panels for GM A-Body and GM-G Body Cars CHEV 5960-CT Chevrolet and ElCamino $261 GMA 6467-HC Fits A-Body and El Camino For cars with heater only $179 GMA 6467-AC Fits A-Body and El Camino Opening to left of heater is for optional AC unit and is scribed $179 GMA 6872-HC Fits A-Body and El Camino For cars with heater only $179 GMA 6872-AC Fits A-Body and El Camino with Cars with factory A/C $179 GMA 7377-AC Fits A-Body and El Camino For Cars with factory A/C $179 For more information visit: or contact us at Quiet Ride Solutions Prices Subject to Change Without Notice

5 GM A-Body Coupe GMA 6465-CAK Roof Kit Trunk Kit Firewall Insulators for this Vehicle Products are available separately or as complete kits. See Catalog for other products available for this vehicle. GMA 6467-AC GMA 6467-HC

6 GM A-Body Convertible GMA 6465-CVAK Trunk Kit Complete kits include the Firewall Insulators for this Vehicle Products are available separately or as complete kits. See Catalog for other products available for this vehicle. GMA 6467-AC GMA 6467-HC

7 GM A-Body Coupe GMA 6667-CAK Roof Kit Trunk Kit Complete kits include the Firewall Insulators for this Vehicle Products are available separately or as complete kits. See Catalog for other products available for this vehicle. GMA 6467-AC GMA 6467-HC

8 GM A-Body Convertible GMA 6667-CVAK Trunk Kit Firewall Insulators for this Vehicle Products are available separately or as complete kits. See Catalog for other products available for this vehicle. GMA 6467-AC GMA 6467-HC

9 GM A-Body Coupe GMA 6872-CAK Roof Kit Trunk Kit Complete kits include the Firewall Insulators for this Vehicle GMA 6872-AC GMA 6872-HC

10 GM A-Body Convertible GMA 6872-CVAK Complete kits include the Firewall Insulators for this Vehicle GMA 6872-AC GMA 6872-HC

11 GM A-Body Coupe GMA 7377-CAK Roof Kit Trunk Kit Firewall Insulator for this Vehicle Complete kits include the GM-A Body Firewall Insulator--AC

12 GM A-Body Convertible GMA 7377-CVAK Trunk Kit Firewall Insulator for this Vehicle Complete kits include the GM-A Body Firewall Insulator--AC

13 Typical GM A-Body Floor AcoustiShield Pre-Cut Patterns Dynamat Xtreme Heat Shield Damper Pads Barrier Insulation Typical GM A-Body Roof AcoustiShield Pre-Cut Patterns Dynamat Xtreme Heat Shield Damper Pads Barrier Insulation Typical GM A-Body Cowl AcoustiShield Pre-Cut Patterns Heat Shield Barrier Insulation

14 Typical GM A-Body Body AcoustiShield Pre-Cut Patterns Dynamat Xtreme Heat Shield Damper Pads Barrier Insulation Typical GM A-Body Trunk AcoustiShield Pre-Cut Patterns Dynamat Xtreme Heat Shield Damper Pads Barrier Insulation Complete GM A-Body AcoustiShield Kits Include the Door Damper/Barrier Insulation Kit

15 Mounting Pins and Clips American Cars and Trucks used a wide variety of mounting pins, clips, buttons and screws to attach the firewall insulator to the interior of the steel firewall bulkhead. Clean up and reuse your original mounting pins if you have them. We offer the following mounting pins and information based on what we have been able to find available. UMPS-10 Universal Mounting Pins If your original firewall mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a plastic Christmas tree type pin with a 1/2 button head that will fit most 5/16 inch holes. Kit includes 10 pins. 20 UWC-MPL-10 UWC-MPS-10 UPPS-20 Universal Wire Cap Mounting Pin--Long A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Long shank (1/2 inch) with a 1/2 inch button head that can be painted to match the firewall color. Kit includes 10 Pins. Universal Wire Cap Mounting Pin--Short A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Short shank (1/4 inch) with a 1/2 inch button head that can be painted to match the firewall color. Kit includes 10 Pins. Universal Upholstery Panel Pin Set If your original upholstery panel mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a short-shank plastic Christmas tree type pin with a 1/2 inch head that will fit 5/16 inch holes. Kit includes 10 pins FORD MPL FORD MPS FORD RB-MP Early Ford Firewall Mounting Pins--Long These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 3/4 inch in length. The Long pin works best in the cars and may be used on cars through the mid-fiftys. Early Ford Firewall Mounting Pin--Short These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 1/2 inch in length. The short pins work best for the Ford cars and Ford trucks and may be used on trucks through the mid-fiftys. Late Model Ford Firewall Mounting Pins--Rubber Bullet Style These all Rubber Bullet Style Ford mounting pins were used on FOMOCO products starting in These are an exact reproduction of the original GM 5500-MP SRMP-9 GM Firewall Plastic Firewall Mounting Plugs General Motors started using a plastic firewall mounting plug to attach the insulator to the steel firewall bulkhead in 1955 for trucks and 1957 for cars. These plugs are still used in many GM vehicles today. Street Rod Mounting Pin Kit With this new mounting pin kit, you can smooth your firewall by welding closed the firewall mounting holes and install any of our insulator panels for that smoothie look. This kit will give you the option to place the firewall mounting pins where they will fit your application best. Be sure to order your firewall insulator No Holes when you place your order. Kit Includes 9 pinsets and instructions R R Early and Mid-Year 1932 Ford Correct insulator panel to dash mounting screws for early and mid-year 1932 passenger car, wagon and sedan delivery. Per Ford Engineering release documents, the correct slotted flat head screws (1/4-20 x 1 3/16), locks, hex nuts and cup washers. Finished in black oxide. Kit includes 12 Sets (48 pieces.) Please Order directly from Roy Nacewicz Enterprises, Ford Original Shoulder Bolts for mid-to-late 1932 through 1935 Cars/Trucks Ford special slotted truss head shoulder screw, painted in Ford S-2 finish. Period correct insulator panel to dash Truss head/shoulder mounting bolts for midto-late car, wagon and sedan delivery. Per Ford Engineering release documents. Kit includes one Shoulder screw, 1/4 lock and 1/4-20 hex nut. FYI: 12 required for 1932 Vehicles and 14 required for vehicles. Please Order directly from Roy Nacewicz Enterprises, Quiet Ride Solutions Prices Subject to Change Without Notice For more information visit: or contact us at info@quietride.com