Presented by: Oscar Torres, Du-All Safety Date: 5/8/2018
|
|
|
- Brice Allison
- 5 years ago
- Views:
Transcription
1 Presented by: Oscar Torres, Du-All Safety Date: 5/8/2018
2 Objectives In this course, we will discuss the following: Operator training and evaluation refresher requirements Minimum Cal OSHA general requirements for powered industrial trucks (PITS) Safe operation of equipment Hazard identification Abatement methods and procedures
3 Components of a Forklift Truck* *One of the most common types of powered industrial trucks 3
4 Daily Inspection The safety equipment you must inspect daily is: Seat Belt Warning Light Backup Alarm Horn
5 Daily Inspection The safety equipment you must inspect daily is: Steering Brakes Carriage, chains, forks Hydraulic hoses
6 Daily Inspection The safety equipment you must inspect daily is: Hydraulic lift/tilt controls Tires Hour Meter Leaks
7 Daily Inspection The safety equipment you must inspect daily is: Fuel level Oil level and pressure Water level Fan Belt
8 Classes of Commonly-Used Powered Industrial Trucks* The Industrial Truck Association has placed powered industrial trucks into 7 classes. Class I - Electric motor rider trucks Class II - Electric motor narrow aisle trucks Class III - Electric motor hand trucks or hand/rider trucks Class IV - Internal combustion engine trucks (solid/cushion tires) Class V - Internal combustion engine trucks (pneumatic tires) Class VI - Electric and internal combustion engine tractors Class VII - Rough terrain forklift trucks * Note that this classification refers to commonly-used vehicles and does not include all powered industrial trucks covered by the OSHA standard. 8
9 Class I - Electric Motor Rider Trucks 9
10 Class II - Electric Motor Narrow Aisle Trucks 10
11 Class III - Electric Motor Hand or Hand/Rider Trucks 11
12 Class IV - Internal Combustion Engine Trucks - Cushion (Solid) Tires Fork, counterbalanced (cushion/solid tires) 12
13 Class V - Internal Combustion Engine Trucks - Pneumatic Tires Fork, counterbalanced (pneumatic tires) 13
14 Class VI - Electric & Internal Combustion Engine Tractors Sit-down rider 14
15 Class VII - Rough Terrain Forklift Trucks Straight-mast forklift Extended-reach forklift All rough terrain forklift trucks 15
16 Operator Training Employer shall ensure each powered industrial truck operator is competent to operate a powered industrial truck safely Employer must certify that each operator has been trained and evaluated As demonstrated by successful completion of training and practical evaluation.
17 Operator Training Truck-related topics Capacity/Limits Attachments Inspections Maintenance Workplace-related topics Surface conditions Load stability Narrow aisle Pedestrian traffic
18 Common Causes of Forklift Accidents Federal OSHA research has identified the most common causes of forklift accidents. Vehicle Tip-Over Person Struck by Truck Person Struck by Falling Load Elevated Employee on the Truck Running off a Loading Dock or Other Surfaces Improper Maintenance Lost Control of Truck Material Struck by Truck Review FACE Reports
19 Posting Requirement
20 Stability Forward wheels are the fulcrum Fulcrum Fulcrum
21 Stability Potential Hazards: Before handling loads, be aware of the following: Off-center loads which may cause tip over or falling loads. Overloading which may cause tip over or falling loads. Damaged or loose loads. Recommended Practices: Secure the load so it is safely arranged and stable. Do not carry damaged merchandise unless it has been secured by wrapping or banding. (Figure 2) Center the load as nearly as possible. Use caution when handling offcenter loads that cannot be centered. Distribute the heaviest part of the load nearest the front wheels of the forklift. Do not overload. Know the stated capacity of your forklift and do not exceed it. Only by keeping within the weight limit can you operate the forklift safely. A forklift's capacity is rated for a specified load center. If the load is offcenter, improperly distributed, or oversized, it may exceed capacity and unbalance the forklift. (Figure 3) Use the load extension backrest.
22 Stability Triangle Counterbalanced powered industrial trucks Vehicle is supported at three points
23 Stability Triangle Counterbalanced powered industrial trucks Vehicle is supported at three points
24 Traveling with the Load Forklift operators should be aware of procedures to follow when traveling on ramps and other inclines with a load. Potential Hazards: Danger of tipover. Danger of losing load. Requirements and Recommended Practices: When traveling with a load, the load should point up the incline, regardless of direction of travel. Going up the incline: Drive forward. Forks pointed upgrade. Use a spotter if load blocks the driver's view. Going down the incline: Drive in reverse. Turn head and face downgrade. Forks pointed up the grade. NOTE: When walking with a pallet truck with or without a load, the forks should be pointed downgrade, regardless of direction of travel.
25 Traveling with the Load Forklift operators should follow certain procedures when traveling on ramps and grades without a load. Potential Hazards: Danger of tipover. Requirements and Recommended Practices: When traveling without a load, the forks should point downgrade, regardless of direction of travel. Going up the incline: Drive in reverse. Turn head and face upgrade. Forks pointed downgrade. Going down the incline: Drive forward. Forks pointed downgrade.
26 Forklift Safety What Causes Accidents? Lack of Knowledge / Experience Lack of Pre-Planning Poor Execution / Competency Inadequate Supervision Poor Communication
27 Forklift Safety What are the basics? You must inspect the Forklift You have to Recognize hazards You have to have a plan to work safely!! You must put your plan in action! OK.. Lets look at some important items
28 Key Items : Floor conditions Overhead obstructions Access to aisles Shape of the load Balance of the load Stability of the load OK. now can YOU name a few??? Travel slowly! Turn slowly! Forklift Safety Safe Operation THE BASICS Keep the load low until you are stopped completely!
29 Scaffold Safety DO s and DON TS : Don t drive fast Don t lift the load while you are turning EVER!! Don t Go DOWN in an incline in REVERSE- EVER!! DO give pedestrians the RIGHT of WAY! DO Know the weight of your load! DO Know the Center of Gravity DO Secure your load DO Drive backwards when you can t see around the load.
30 Forklift Safety OK- Lets go move some materials Go to Work and.. DO it Safely!
Powered Industrial Trucks - Operator Training
Powered Industrial Trucks - Operator Training 1910.178 (l) 1915.120 (a) 1917.1 (a)(2)(xiv xiv) 1918.1 (b)(10) 1926.602 (d) Disclaimer This presentation is intended as a resource for providing training
Powered Industrial Truck Operator. Kelley Edmier Safety Check, Inc. Jim Martinek, Josh Moore & Jacob Scott OSHA
Powered Industrial Truck Operator Training Kelley Edmier Safety Check, Inc. Jim Martinek, Josh Moore & Jacob Scott OSHA Powered Industrial Truck Operator Training Forklift Safety: An Operator Training
Powered Industrial Truck Operator Training - Initial. Presented by: Du-All Safety
Powered Industrial Truck Operator Training - Initial Presented by: Du-All Safety Objectives In this course, we will discuss the following: Operator training and evaluation Minimum OSHA general requirements
ROUGH TERRAIN VEHICLES
ROUGH TERRAIN VEHICLES OPERATING SAFETY RULES AND PRACTICES Operator Responsibility Safe operation is the responsibility of the operator. The equipment can be dangerous if not used properly. The operator
ONLY TRAINED AND AUTHORIZED EMPLOYEES TRAINING CAN BE GOOD FOR UP TO 3 YEARS BUT THE TRAINER WILL DETERMINE THE DURATION BASED ON SKILL EVALUATION
ONLY TRAINED AND AUTHORIZED EMPLOYEES TRAINING CAN BE GOOD FOR UP TO 3 YEARS BUT THE TRAINER WILL DETERMINE THE DURATION BASED ON SKILL EVALUATION Authorized Employee: One who has completed the County
SECTION 11 POWERED INDUSTRIAL TRUCKS
SECTION 11 POWERED INDUSTRIAL TRUCKS 11.1 Powered Industrial Truck Procedure 11.2 Forklift Inspection 11.3 Operator Performance Evaluation Checklist Revised: May 2009 Updated: November 2017 Reviewed: October
Print Name Very Clearly. Signature of Participant
Training Sign-In Sheet Client: Kintetsu World Express (KWE) Location: Class/Regulatory Reference: Forklift Safety, 29 CFR 1910.178 Date: 10/14/2015 Certificates Yes / No Facilitator: Du-All Safety Wallet
Powered Industrial Trucks
INDIANA UNIVERSITY-PURDUE UNIVERSITY at INDIANAPOLIS IUPUI Department of Environmental Health and Safety 620 Union Drive, Room 043, Indianapolis, Indiana 46202 Powered Industrial Trucks Purpose and Background
SUNY GENESEO ENVIRONMENTAL HEALTH & SAFETY
Prepared by: Darlene Necaster Page 1 I. OVERVIEW Material handling is a significant safety concern. During the movement of products and materials, there are a number of opportunities for injuries and property
Risk Management Department. Forklift Safety
Risk Management Department Forklift 1 Introduction to Forklift Operating a forklift is an important job. So important that the federal government requires that all lift truck operators be trained and authorized
Forklift Evaluator Training. Module 2
Forklift Evaluator Training Module 2 Operating the Forklift Safely operating a forklift requires preparation, anticipation and careful attention in order to maintain control of the vehicle at all times.
DU-ALL SAFETY FORKLIFT TRUCK OPERATORS TRAINING COURSE WRITTEN TEST PART 1 OPERATOR S NAME DATE
DU-ALL SAFETY FORKLIFT TRUCK OPERATORS TRAINING COURSE WRITTEN TEST PART 1 OPERATOR S NAME DATE MULTIPLE CHOICE (select the answer which is most correct and circle the letter.) 1. A lift truck training
Environmental Health and Safety Office
Environmental Health and Safety Office Industrial Powered Trucks/ Forklift Safety August 2011 1.0 Purpose This policy has been developed to establish compliance with OSHA standard 29 CFR 1910.178 for industrial
9818 FORKLIFT OPERATOR TRAINING
ERI Safety Videos Videos for Safety Meetings 9818 FORKLIFT OPERATOR TRAINING Leader s Guide MCMXCVIII, ERI PRODUCTIONS INC. FORKLIFT OPERATOR TRAINING This easy-to-use Leader s Guide is provided to assist
LIFT TRUCK SAFETY OPERATOR TRAINING
LIFT TRUCK SAFETY OPERATOR TRAINING Avoiding Injury One person and a lift truck can move large amounts of material with ease and efficiency. Employers are responsible for training operators in the safe
Powered Industrial Trucks. Supersedes: 10/14 (Rev. 02) Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager
Procedure No.: PA-020-0057 Page: 1 of 14 Preparer: Owner: Approver: EHS Team Member EHS Team Member EHS Manager Document Revision Change Table Revision Number Revision Description Revised By Revision Date
Forklift and Industrial Trucks
Forklift and Industrial Trucks University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells 1.0 Program Objective This program for
UC Irvine Environmental Health & Safety SECTION: TITLE: Powered Industrial Truck (Forklift) Safety Program
UC Irvine Environmental Health & Safety SECTION: TITLE: Powered Industrial Truck (Forklift) Safety Program INITIATOR: Desirée Villarreal REVISION DATE: 10/17/2014 1. Program Description 2. Scope 3. Definitions
Operator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations
M S E R I E Operator Manual S This operator manual has information for all models of series M plus some options and accessories. Some of the illustrations and information may not The most apply to your
Powered Industrial Truck Safety Program
Powered Industrial Truck Safety Program 0 TABLE OF CONTENTS Forklift Safety Program 1.0 Overview.. 2 2.0 Purpose....2 3.0 Procedures..2 4.0 Responsibilities. 4 5.0 Training Requirements......5 Appendix
UNIVERSITY OF TOLEDO
UNIVERSITY OF TOLEDO SUBJECT: POWERED INDUSTRIAL TRUCKS Procedure No: S-08-046 PROCEDURE STATEMENT All powered industrial truck operators must be licensed through the University of Toledo Environmental
New Bremen, Ohio USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A.
New Bremen, Ohio 45869 USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A. You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others
Operator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and
Operator Manual This operator manual has information for all models of series B plus some options and accessories. Some of the illustrations and information may not apply to your truck. The most important
RUTGERS UNIVERSITY POWERED INDUSTRIAL TRUCK PROGRAM
RUTGERS UNIVERSITY POWERED INDUSTRIAL TRUCK PROGRAM 9/01 1 TABLE OF CONTENTS POWERED INDUSTRIAL TRUCK PROGRAM A. PURPOSE AND SCOPE...1 B. LIFE TRUCK REQUIREMENTS...1 C. AREA REQUIREMENTS...2 D. RESPONSIBILITIES...2
Forklift Safety Plan Contents: Forklift Safety Plan
Forklift Safety Plan Contents: Forklift Safety Plan Introduction... ii Plan Cover Sheet... 1 Purpose... 2 Supervisory Responsibilities... 2 Maintenance, Fueling, and Repair... 3 General Rules for Operator
Powered Industrial Truck Written Test
Powered Industrial Truck Written Test Employee s Name (please print): Date: Grade: 1. Anyone who has a valid driver s license can operate a lift truck. 2. It is safe to give someone a ride on your lift
DUQUESNE UNIVERSITY FORKLIFT SAFETY PROGRAM
DUQUESNE UNIVERSITY FORKLIFT SAFETY PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Driver Qualifications 1 Operator Training 2 Refresher Training 2 Evaluations
Forklift Operator - Safety and Operation. By: Peter Ribbe. PGCert.OHSEM, Dip. OHS, PM, Mn, HRM, Bs.
Forklift Operator - Safety and Operation By: Peter Ribbe PGCert.OHSEM, Dip. OHS, PM, Mn, HRM, Bs. Before you jump on; Never take for granted that the forklift is in an operational state, the moment you
Powered Industrial Trucks Workgroup The workgroup met on to discuss the applicability of the proposed rule for general industry on Powered
e Powered Industrial Trucks Workgroup The workgroup met on 5-25-95 to discuss the applicability of the proposed rule for general industry on Powered Industrial Trucks as it would relate to the construction
Course 725. Forklift Safety
Forklift Safety This page intentionally blank OSHAcademy Course 725 Study Guide Forklift Safety Copyright 2017 Geigle Safety Group, Inc. No portion of this text may be reprinted for other than personal
Powered Industrial Truck Operators Policy
Mount Holyoke College Office of Environmental Health & Safety Powered Industrial Truck Operators Policy I. General Requirements Only trained and certified operators are permitted to operate powered industrial
Videos for Safety Meetings 2453-LDG-E. 2005, ERI Safety Videos
Videos for Safety Meetings 2453-LDG-E 2005, ERI Safety Videos OPERATING REACH TRUCKS SAFELY This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are:
POWERED INDUSTRIAL TRUCK OPERATIONS
POWERED INDUSTRIAL TRUCK OPERATIONS DEPARTMENT OF RISK MANAGEMENT AND SAFETY CREATED AUGUST 2009 Table of Contents INTRODUCTION... 1 RESPONSIBILITIES... 1 PRE-QUALIFICATIONS... 1 TRAINING... 1 LICENSING...
!!! Sample Written Program For Your Company! For! Forklift Safety!! Provided By: !!!
Sample Written Program For Your Company For Forklift Safety Provided By: P.O. Box 2136 Slidell, LA 70458 Phone: 985-781-1444 Fax: 985-718-4957 Email: info@se-safety.com Forklift & Motorized Pallet Jack
OPERATOR S MANUAL 7(5 & ( 8&. $5.00 P/N REV.B
OPERATOR S MANUAL &281 2817( 7(5 %$/$1&( /,)7 7758& 8&. $5.00 P/N 901345 REV.B As a lift truck operator, you are responsible for a machine that is useful, powerful, and can be hazardous if not operated
Powered Industrial Truck Operation
Environment, Health & Safety Office SOP #: EHS-0024 Revision #: 1.5 Implementation Date: 09/28/04 Page #: 1 of 20 Last Reviewed/Update Date: 03/13/12 SOP Owner: Bret Dyer Approval: EHS: Lou DiBerardinis;
POWERED INDUSTRIAL TRUCK OPERATOR TRAINING
POWERED INDUSTRIAL TRUCK OPERATOR TRAINING TABLE OF CONTENTS General Information Select a Trainer Identify Employees to be Trained Training Manual Develop a Training Schedule Conduct Formal (classroom)
Powered Industrial Truck Program
Powered Industrial Truck Program i Table of Contents INTRODUCTION... 1 Forward... 1 Objective... 1 Applicability... 1 Responsibilities... 1 Program Enforcement... 2 OPERATING PROCEDURES... 3 Operation...
Operation of Fork Lift Trucks
Operation of Fork Lift Trucks 1. PURPOSE The purpose of this Procedure is to define the rules for the safe operation of Forklift trucks within the University. 2. SCOPE These rules apply to all rider-type
Power Industrial Vehicle Program
Power Industrial Vehicle Program For Adopted LC-1031 Rev. 06/16 Page 1 Objective The objective of this section of the
Work Instructions: Inspecting Forklifts
Work Instructions: Inspecting Forklifts Overview Purpose To explain the procedure for inspecting forklifts which is designed to: Ensure forklifts are working properly Comply with OSHA regulations Scope
PW Operator Manual PW This operator manual. has information for all. models of series PW plus some options. and accessories.
Operator Manual PW 3000 S E R I E S This operator manual has information for all models of series PW 3000 plus some options and accessories. Some The most of the illustrations and important component information
You Must be Trained. 1 Warning. You Must be Trained 2
Operator Manual You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others around you can be seriously injured or even killed if
Operator Manual. TR 3600 SERiES. The most important component is you. This operator manual. has information for all. models of TR 3600 series
TR 3600 SERiES Operator Manual This operator manual has information for all models of TR 3600 series plus some options and accessories. Some of the illustrations and information may not apply to your truck.
Industrial Truck (Forklift) Safety Program
University of North Carolina Wilmington Environmental Health & Safety Workplace Safety Industrial Truck (Forklift) Safety Program GENERAL The UNCW Environmental Health & Safety Department (EH&S) is authorized
SC 4000 SC Operator Manual. This operator manual. all models of SC4000 series. plus some options and. accessories. Some of the.
SC 4000 S E R I E Operator Manual S This operator manual has information The most important component is you. for all models of SC4000 series plus some options and accessories. Some of the illustrations
The SWL is stated on the nameplate and sometimes gives the appropriate SWL at other distances from the face of the carriage.
Fork Lift Trucks 1 The Parts 2 The SWL. The SWL is stated on the nameplate and sometimes gives the appropriate SWL at other distances from the face of the carriage. 3 The Nameplate. 4 The SWL. The capacity
Operator Manual. This operator manual. has information for all. models of series PR plus some options. and accessories. Some
Operator Manual This operator manual has information for all models of series PR 3000 plus some options and accessories. Some of the illustrations and information may not apply to your truck. New Bremen,
SAFETYFIRSTTRAINING.CA
2425 Matheson Blvd. East, 8th Floor Mississauga, ON L4W 5K4 info@safetyfirsttraining.ca 905.672.3600 COURSE LIBRARY EQUIPMENT This all-in-one safety solution includes access to a comprehensive library
Environmental Health and Safety Office Powered Industrial Truck Program. Updated May 2012, 2013
Updated May 2012, 2013 Revised May 2011 TABLE OF CONTENTS Sections A. B. C. D. E. F. Statement of Policy.1 Purpose and Objectives.2 Scope..3 Exemptions 3 Definitions..4 Program Elements..8 Attachment A
BGL-33 WALKIE COUNTERBALANCED STACKER WARNING
OPERATOR S MANUAL BGL-33 WALKIE COUNTERBALANCED STACKER WARNING Do not operate or service this product unless you have read and fully understand the entire contents of this manual. Failure to do so may
Powered Industrial Trucks (Forklifts)
Powered Industrial Trucks (Forklifts) The University Of Iowa Environmental Health & Safety 122 Grand Avenue Court Iowa City, IA 52242-1000 Phone: 319-335-8501 Date Revised/Reviewed: 5/16/2018 Table of
Operator Manual. PC 3600 SERiES. The most important component is you. This operator manual. has information for all. models of PC 3600 series
PC 3600 SERiES Operator Manual This operator manual has information for all models of PC 3600 series plus some options and accessories. Some of the illustrations and information may not apply to your truck.
You Must be Trained. 1 Warning. You Must be Trained 2
Operator Manual You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others around you can be seriously injured or even killed if
TITLE: 1707 FORKLIFT SAFETY: Industrial Counterbalance Lift Trucks
TITLE: 1707 FORKLIFT SAFETY: Industrial Counterbalance Lift Trucks LENGTH: 22 MINUTES PRODUCTION YEAR: 2016 PROGRAM SYNOPSIS Forklifts are rugged and effective tools that can move materials around the
You Must be Trained. 1 Warning. You Must be Trained 2
Operator Manual You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others around you can be seriously injured or even killed if
Operator Manual. This operator manual. has information for all. models of SC 4500 series. plus some options and. accessories.
SC 4500 SERiES Operator Manual This operator manual has information for all models of SC 4500 series plus some options and accessories. Some of the illustrations and information may not apply to your truck.
Safe Operating Procedure ELECTRIC FORKLIFT
Safe Operating Procedure ELECTRIC FORKLIFT DO NOT use this equipment unless you have been instructed in its safe use and operation and given prior permission. PERSONAL PROTECTIVE EQUIPMENT `` PRE-OPERATIONAL
Power Industrial Truck
C L O V I S U N I F I E D S C H O O L D I S T R I C T Trans po rt a tio n De par tme nt Power Industrial Truck Utility Cart, Golf Cart, Forklift, etc. PIT Driver Handbook Revised May, 2013 1 P I T D R
INDUSTRIAL TRUCK OPERATOR TRAINING GUIDE
INDUSTRIAL TRUCK OPERATOR TRAININ UIDE POWERED INDUSTRIAL TRUCK OPERATOR TRAININ TABLE OF CONTENTS 1 Powered Industrial Truck Operator Training Federal Register Final Rule; December 1, 1998 10 Summary
The University of Louisiana at Monroe Utility Vehicle Safety Policy
The University of Louisiana at Monroe 1. Introduction The information and instructions included in this policy will enable operators of utility vehicles to avoid situations that may compromise their safety
Powered Industrial Truck Program SAMPLE. Procedure Revision History Number Date Approval
Powered Industrial Truck Program Procedure Revision History Number Date Approval Prepared in accordance and in compliance with California General Industry Safety Order 3203, requirements, current reference
Battery Maintenance continued
Operator Manual Battery Maintenance continued Warning You MustLabels be Trained Stay clear of all moving parts. It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev.
SELF-ASSESSMENT FORM. For Occupational Health And Safety. Lift Truck
Equipment identification: Lift Truck Date : 1 2 A 3 Truck Parts 1 Upright Mast 2 Hydraulic Lift Cylinder 3 Forks 4 Carriage 5 Drive Wheels 6 Steerable Wheels 7 Chassis 8 Parking Brake 9 Brake 10 Counterweight
FOR THE MANAGEMENT OF POWERED INDUSTRIAL TRUCKS
BEST MANAGEMENT PRACTICE FOR THE MANAGEMENT OF POWERED INDUSTRIAL TRUCKS PREPARED BY THE BREWERS ASSOCIATION SAFETY SUBCOMMITTEE TABLE OF CONTENTS Purpose.... 3 Summary.... 3 Frequently Asked Questions...
IT'S THE LAW, YOU MUST BE TRAINED AND CERTIFIED
Operator Manual You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others around you can be seriously injured or even killed if
Powered Industrial Vehicle Policy
Powered Industrial Vehicle Policy Policy The Flight Department is committed to protecting employees from the hazards involved in the operation of powered industrial vehicles. This Policy is established
THE UNIVERSITY OF MAINE AT PRESQUE ISLE. Powered Industrial Trucks & other vehicles
THE UNIVERSITY OF MAINE AT PRESQUE ISLE Powered Industrial Trucks & other vehicles General The Powered Industrial Truck Policy applies to the operation of forklifts, pallet jacks, platform-mounted trucks,
In This Document MODULE DESCRIPTION This module provides information on the safety concerns and
Crane Safety Fact Sheet In This Document MODULE DESCRIPTION This module provides information on the safety concerns and Introduction necessary precautions you will need to be aware of when working Crane
AERIAL LIFTS/MAN-LIFTS
AERIAL LIFTS/MAN-LIFTS Aerial lifts are pieces of equipment that many workers can't imagine working without. This equipment, if used correctly, provides quick and safe access to work areas that at one
Operator Manual. Manual Steer
Operator Manual Manual Steer You Must be Trained WARNING It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others around you can be seriously injured
4 B High Do not allow anyone except the signal person in the working area
LOADING OPERATIONS Always operate the mast and forks from the operator's seat Be careful not to operate the lever by mistake. There is danger that the forks or work equipment may cause serious injury Unauthorised
Operator Manual. Manual Steer
Operator Manual Manual Steer You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others around you can be seriously injured or even
TSP TSP. Operator Manual. This operator manual has. information for all models of. series TSP plus some options. and accessories.
TSP S E R I E S Operator Manual This operator manual has information for all models of series TSP plus some options and accessories. Some of the illustrations and information may not apply to your truck.
FORKLIFT SAFETY: Industrial Counterbalance Lift Trucks
1707 FORKLIFT SAFETY: Industrial Counterbalance Lift Trucks Leader s Guide Marcom Group Ltd. Structure and Organization Information in this program is presented in a definite order so that employees will
Airport Terminal Services, Inc. FORKLIFT
Airport Terminal Services, Inc. FORKLIFT Revised 4/03 Revised 11/04 INTRODUCTION: The Forklift is specialized piece of GSE that that is used to lift and/or transport palletized or containerized cargo short
POWERED INDUSTRIAL TRUCK PROGRAM September 2015
A. SCOPE AND APPLICATION POWERED INDUSTRIAL TRUCK PROGRAM September 2015 The Powered Industrial Truck Program is established in accordance with 29 CFR 1910.178, Powered Industrial Trucks, and describes
Work Platforms. Operators Manual Warning Stickers ANSI Standards. ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 )
Work Platforms ( Model # MWP 4x4 ) ( Model # MWP 4x6 ) ( Model # MWP 4X8 ) ( Model # MWP 4x116 ) Operators Manual Warning Stickers ANSI Standards Marv Haugen Enterprises 1851 Heartland Ave. 1851 Heartland
Powered Mobile Equipment. Site Function: Ecology, Health and Safety Procedure No.: WYN Page: 1 of 19
Procedure No.: WYN032.004 Page: 1 of 19 Preparer: Owner: Approver: EHS Specialist EHS Specialist EHS Hub Manager A Corporate Procedure exists for this subject matter. The WYN procedure is an addendum to
OPERATOR S MANUAL ECB-22 ELECTRIC FORKLIFT WARNING
OPERATOR S MANUAL ECB-22 ELECTRIC FORKLIFT WARNING Do not operate or service this product unless you have read and fully understand the entire contents of this manual. Failure to do so may result in property
RR 5200S RR 5200S. Operator Manual. information for all models of. RR5000S series plus some options. and accessories. Some of the
RR 5200S S E R I E S Operator Manual T h i s o p e r a t o r m a n u a l h a s information for all models of RR5000S series plus some options and accessories. Some of the illustrations and information
Bright Forklift Montacargas Bright
Montacargas Bright Operator s Manual Manual del operador Bright Coop Inc. 803 W. Seale St. Nacogdoches, TX 75964 Phone: (936) 564-8378 Fax: (936) 564-3281 Info@brightcoop.com Printed in the U.S.A. 1-1-2019
SECTION 14: AERIAL LIFT PROGRAM
SECTION 14: AERIAL LIFT PROGRAM Fisher Auto Parts is committed to promoting a safe and healthy environment for all employees and customers. Protection from accidental loss of any resources, especially
EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax
n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 15/18/20L-7M VERKOOP VERHUUR TWEEDEHANDS SERVICES EUROTRADING MORTIER Torhoutbaan 181-8480 ICHTEGEM Tel. 050 21
15/18/20L(G)-7M. Specification. Dimension. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine PLEASE CONTACT. h10 I2 I e. b12.
Specification Dimension Identification Hyundai Hyundai 18L(G)-7M 20L(G)-7M Drive: electric (battery or mains),diesel,petrol,fuel gas,manual LP / Gas LP / Gas LP / Gas Type of operation:hand,pedestrian,standing,seated,order-picker
Operator Manual. The most important component is you. SP plus some options and. accessories. Some of the. illustrations and information
Operator Manual This operator has information all models of manual for series SP plus some options and accessories. Some of the illustrations and information may not apply to your truck. The most important
Course Information. Description
CHC 201 Commercial Truck Driving I Course Information Credits 7 Campus Washburn Institute of Technology Address 5724 SW Huntoon City/State/Zip Topeka, Kansas 66604 Office Fax 785-273-7080 Description The
Health & Safety at Toyota
Toyota Material Handling UK Health & Safety at Toyota Toyota Stand HS208 April 2018 1 Introduction Paul Mulcahy Quality, Safety & Environment Manager Toyota Material Handling UK 2 Working Safely with Materials
While handling materials, employees must abide by the following requirements:
Material Handling and Equipment 12.1 Material Handling by Individuals While handling materials, employees must abide by the following requirements: a) Know the safe way to lift: i. A secure footing, feet
CPCS renewal test factsheet
CPCS renewal test factsheet Introduction to the CPCS renewal test The industry-led CPCS Management Committee has determined that key safety-related knowledge must be checked on each category prior to the
GUIDELINES FOR THE USE OF SCISSOR LIFTS (ELEVATING WORK PLATFORMS) AND AERIAL BOOM LIFTS (EXTENSIBLE BOOM PLATFORMS)
Building for Tomorrow s Leaders LACCD Program Management 1055 Corporate Center Drive Monterey Park, California 91754 www.build-laccd.org 323.981.7200 tel BuildSafe Safety Bulletin for April 2018 GUIDELINES
n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 35L/40L/45L/50L-7A
n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 35L/40L/45L/50L-7A 02 n Photo may include optional equipment FORKLIFT Excellent model NEW criterion of Forklift
SAINT MARY S COLLEGE OF CALIFORNIA STANDARD POWERED INDUSTRIAL TRUCK OPERATION. Prepared by
SAINT MARY S COLLEGE OF CALIFORNIA STANDARD 1.1.1 POWERED INDUSTRIAL TRUCK OPERATION Prepared by SAINT MARY S COLLEGE OF CA MORAGA, California KAREN LAURICELLA Original Date: 22 MAY, 2003 Effectivity:
Property of American Airlines
OPERATING MANUAL CHALLENGER H165-280XL [E007] H300-360XL [D019] H330-360XL -EC [D019] DO NOT REMOVE THIS MANUAL FROM THIS UNIT HYSTER COMPANY PART NUMBER 897342 LIFT TRUCK MODEL SERIAL NUMBER ENGINE MODEL
Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 25LC/30LC-7M 25GC/30GC-7M
Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 2LC/0LC-7M 2GC/0GC-7M 02 Some of the photos may include optional equipment. FORKLIFT Excellent Model
Cranes. OSHA Office of Training & Education 1
Cranes OSHA Office of Training & Education 1 Major Causes of Crane Accidents Contact with power lines Overturns Falls Mechanical failures OSHA Office of Training & Education 2 How Do Accidents Occur? Instability
Powered Cart Guidelines
Powered Cart Guidelines Purpose 1 Definitions 2 Eligible Drivers 3 Authorization to Operate 4 General Safety Rules for Cart Operation 5 Sample Safety Operating Rules Certification Form 6 Sample Pre-Operation
WARNING this attachments capacity changes depending on the Skid Steer Loader it is hooked up to. CAPACITY AT 24 LOAD CENTER
SKID STEER FORKLIFT ATTACHMENT Any piece of equipment can be dangerous if not operated properly. YOU are responsible for the safe operation of this equipment. The operator must carefully read and follow
GEX 40/45/50 ELECTRIC 80 VOLT / 9000 / 10,000 lbs. (4000 / 4500 / 4990 kg)
GEX 40/45/50 ELECTRIC 80 VOLT 8000 / 9000 / 10,000 lbs. (4000 / 4500 / 4990 kg) Solid pneumatic tires provide a softer ride and allow for indoor/outdoor operation. Hydraulic levers are conveniently mounted
AERIAL LIFT Revision Date: 04/2017
AERIAL LIFT 1.1 PURPOSE 1.1.1 PSC CRANE & RIGGING recognizes the hazards associated with the operation of mobile equipment. This policy has been developed to establish guidelines to eliminate injuries