810k / 910k Technical Specifications
|
|
|
- Brittney Campbell
- 5 years ago
- Views:
Transcription
1 IOWA MOLD TOOLING CO., INC. P.O. Box 189 Garner, IA Tel: Fax: Manual # k / 910k Technical Specifications Revised: March 14, 2017 Copyright 2017 Iowa Mold Tooling Co., Inc. All rights reserved No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without the prior written permission of Iowa Mold Tooling Co., Inc. Iowa Mold Tooling Co., Inc. is an Oshkosh Corporation Company
2 ii
3 iii Table of Contents Section K-MC Specifications K-MC Specifications - Continued K MC Metric Specifications K MC Metric Specifications - Continued...5 Section K-MC Lifting Capacity Chart, K K-MC Lifting Capacity Chart, K K-MC Lifting Capacity Chart, K K-MC Lifting Capacity Chart K1 - K Section K-MCS / RC Specifications MCS / RC Specifications - Continued K-MCS / RC Metric Specifications K-MCS / RC Metric Specifications- continued...17 Section K - MCS-RC Lifting Capacity Chart, K K - MCS/-RC Lifting Capacity Chart, K K - MCS/-RC Lifting Capacity Chart, K K-MCS/RC Lifting Capacity Chart K1 - K Section K - RCS - Specifications K- RCS Specifications- continued K- RCS Metric Specifications K- RCS Metric Specifications- continued...31 Section RCS Lifting Capacity Chart, K RCS Lifting Capacity Chart, K RCS Lifting Capacity Chart, K RCS Lifting Capacity Chart, K K-RCS Lifting Capacity Chart K1 - K Section Dimension Sketch...42 Slewing Radius...43 Dimension Sketch For Truck Mounted Loader...44 Lifting Height at Column...45 Dimension Sketch: Swing-Up Stabilizer Legs (Manual)...46 Dimension Sketch: Internal Hose Routing...47
4 iv
5 Section K-MC Technical Specifications 810K-MC Technical Specifications Section - 1
6 Section K-MC Technical Specifications 810K-MC Specifications Performance Unit 810-K1 810-K2 810-K3 810-K4 Loading group (EN12999) HC1 / HD4 Load moment ft-lb Hydraulic reach ft Hydraulic telescopic movement ft Lifting capacity, hydraulic lb-ft Lifting capacity, manual extensions lb-ft Rotational torque, gross ft-lb 5900 Rotation angle 400 Max. heel at max. load moment 5 Rotation speed /s 24 Dimensions Unit 810-K1 810-K2 810-K3 810-K4 Height above chassis in Width in 86 Length, no extra valves in 26 Length, with extra valves (hose guides) in 28 Length, with extra valves (int. hose routing) in 26 Stabilizer spread, S1 (standard) ft 11 Stabilizer spread, S2 ft 14 4 Stabilizer spread, D ft 17 1
7 Section K-MC Technical Specifications 810K-MC Specifications - Continued Weights, basic loader Unit 810-K1 810-K2 810-K3 810-K4 Standard loader 1), excl. stabilizers lbs Stabilizers, S1 fixed lbs 253 Stabilizers, S1 swing-up lbs 265 Stabilizers, S2 fixed lbs 309 Stabilizers, S2 swing-up lbs 319 Stabilizers, D fixed lbs 352 Stabilizers, D swing-up lbs 363 Mounting kit, 3 bolts lbs 99 Mounting kit, 6 bolts lbs 121 Tank, excl. oil (fitted on loader) lbs 77 Manual extensions lbs Oil in loader (stowing position) lbs Weights, equipment Unit 810-K1 810-K2 810-K3 810-K4 1 extra valve, hose guides lbs extra valve, int. hose routing lbs extra valves, hose guides lbs extra valves, int. hose routing lbs 286 High-pressure filter lbs 15 Max. Load on stabilizers (per stabilizer cylinder) Unit 810-K1 810-K2 810-K3 810-K4 S1, fixed Lbf 10³ 40 S1, swing-up Lbf 10³ 40 S2, fixed Lbf 10³ 40 S2, swing-up Lbf 10³ 40 Power consumption (oil capacity) Unit 810-K1 810-K2 810-K3 810-K4 Working pressure PSI 4351 Tank capacity (fitted on loader) gal 14.5 Max. pump performance, 1-circuit gpm 6.6 1) Weights ± 5% because of tolerances for plate thickness
8 Section K-MC Technical Specifications 810K MC Metric Specifications Performance Unit 810-K1 810-K2 810-K3 810-K4 Loading group (EN12999) HC1 / HD4 Load moment tm Hydraulic reach m Hydraulic telescopic movement mm Lifting capacity, hydraulic kg-m Lifting capacity, manual extensions kg-m Rotational torque, gross knm 8 Rotation angle 400 Max. heel at max. load moment 5 Rotation speed /s 24 Dimensions Unit 810-K1 810-K2 810-K3 810-K4 Height above chassis mm Width mm 2200 Length, no extra valves mm 661 Length, with extra valves (hose guides) mm 730 Length, with extra valves (int. hose routing) mm 661 Stabilizer spread, S1 (standard) mm 3400 Stabilizer spread, S2 mm 4400 Stabilizer spread, D mm 5200
9 Section K-MC Technical Specifications 810K MC Metric Specifications - Continued Weights, basic loader Unit 810-K1 810-K2 810-K3 810-K4 Standard loader 1), excl. stabilizers kg Stabilizers, S1 fixed kg 115 Stabilizers, S1 swing-up kg 120 Stabilizers, S2 fixed kg 140 Stabilizers, S2 swing-up kg 145 Stabilizers, D fixed kg 160 Stabilizers, D swing-up kg 165 Mounting kit, 3 bolts kg 45 Mounting kit, 6 bolts kg 55 Tank, excl. oil (fitted on loader) kg 35 Manual extensions kg Oil in loader (stowing position) kg Weights, equipment Unit 810-K1 810-K2 810-K3 810-K4 1 extra valve, hose guides kg extra valve, int. hose routing kg extra valves, hose guides kg 75 2 extra valves, int. hose routing kg 130 High-pressure filter kg 7 Max. Load on stabilizers (per stabilizer cylinder) Unit 810-K1 810-K2 810-K3 810-K4 S1, fixed kn 55 S1, swing-up kn 55 S2, fixed kn 55 S2, swing-up kn 55 Power consumption (oil capacity) Unit 810-K1 810-K2 810-K3 810-K4 Working pressure Bar 300 Tank capacity (fitted on loader) L 55 Max. pump performance, 1-circuit L/min 35 1) Weights ± 5% because of tolerances for plate thickness
10 6 This page left intentionally blank
11 Section K-MC Lifting Capacity Charts 810K-MC Lifting Capacity Charts Section - 2
12 Section K-MC Lifting Capacity Charts 810K-MC Lifting Capacity Chart, K1 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 810 MC K1 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 27 (8.23m) 24 (7.32m) LB KG 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) 9 (2.74m) 6 (1.83m) (0.91m) (0.91m) (1.83m) (2.74m) (3.66m) (4.57m) 18 (5.49m)
13 Section K-MC Lifting Capacity Charts 810K-MC Lifting Capacity Chart, K2 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 810 MC K2 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 33 (10.06m) 30 (9.14m) 27 (8.23m) LB KG 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) 9 (2.74m) 6 (1.83m) 3 (0.91m) (0.91m) (1.83m) (2.74m) (3.66m) (4.57m) 18 (5.49m) 21 (6.40m) 24 (7.32m) REVISIONS REV ECO DESCRIPTION DATE BY A TO CORRECT WRONG BKS WEIGHTS NOTES: 810k / 910k MATL: - Manual # VELVET FINISH LEXAN ADHESIVE: 3M 468 HI-PERFORMANCE APPLIED AFTER SCREENING SIZE: 8.0 H x 6.50 W
14 Section K-MC Lifting Capacity Charts 810K-MC Lifting Capacity Chart, K3 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 810 MC K3 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 39 (11.89m) 36 (10.97m) 33 (10.06m) LB KG 30 (9.14m) 27 (8.23m) 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) (3.66m) 9 (2.74m) 6 (1.83m) 3 (0.91m) (1.83m) 9 (3.66m) 15 (0.91m) (2.74m) (4.57m) 18 (5.49m) 21 (6.40m) 24 (7.32m) 27 (8.23m) 30 (9.14m)
15 Section K-MC Lifting Capacity Charts 810K-MC Lifting Capacity Chart, K4 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 810 MC K4 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 42 (12.80m) 39 (11.89m) 36 (10.97m) 33 (10.06m) 30 (9.14m) LB KG 27 (8.23m) 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) 9 (2.74m) 6 (1.83m) 3 (0.91m) (1.83m) 9 (3.66m) 15 (0.91m) (2.74m) (4.57m) 18 (5.49m) (6.40m) 24 (7.32m) (8.23m) 30 (9.14m) (10.06m) 36 (10.97m)
16 Section K-MC Lifting Capacity Charts 810K-MC Lifting Capacity Chart K1 - K4 Lifting capacity with manual extensions Lifting capacity without manual extensions K1 LBS FT KG M 3,6 5,3 7,3 K2 K3 LBS FT KG M 3,7 5,4 7,3 9,1 LBS FT KG M , , , , ,0 K4 LBS FT KG M , , , , , ,8
17 Section K-MCS / RC Technical Specifications 810K-MCS / RC Technical Specifications Section - 3
18 Section K-MCS / RC Technical Specifications 810K-MCS / RC Specifications Performance Unit 810-K1 810-K2 810-K3 810-K4 Loading group (EN12999) HC1 / HD4 Load moment ft-lb Hydraulic reach ft Hydraulic telescopic movement ft Lifting capacity, hydraulic lb-ft Lifting capacity, manual extensions lb-ft Rotational torque, gross ft-lb 5900 Rotation angle 400 Max. heel at max. load moment 5 Rotation speed /s 24 Dimensions Unit 810-K1 810-K2 810-K3 810-K4 Height above chassis ft/in Width ft/in 7 2 Length, no extra valves in 26 Length, with extra valves (hose guides) in 29 Length, with extra valves (int. hose routing) in 26 Stabilizer spread, S1 (standard) ft/in 11 1 Stabilizer spread, S2 ft/in 14 4 Stabilizer spread, D ftin 17 1
19 Section K-MCS / RC Technical Specifications 810-MCS / RC Specifications - Continued Weights, basic loader Unit 810-K1 810-K2 810-K3 810-K4 Standard loader 1), excl. stabilizers lbs Stabilizers, S1 fixed lbs 253 Stabilizers, S1 swing-up lbs 265 Stabilizers, S2 fixed lbs 309 Stabilizers, S2 swing-up lbs 319 Stabilizers, D fixed lbs 352 Stabilizers, D swing-up lbs 363 Mounting kit, 3 bolts lbs 99 Mounting kit, 6 bolts lbs 121 Tank, excl. oil (fitted on loader) lbs 77 Manual extensions lbs Oil in loader (stowing position) lbs ) Weights ± 5% because of tolerances for plate thickness Weights, equipment Unit 810-K1 680-K2 810-K3 810-K4 1 extra valve, hose guides lbs extra valves, hose guides lbs extra valve, int. hose routing lbs extra valves, int. hose routing lbs 286 High-pressure filter lbs 15 Max load on stabilizers stabilizer cylinder) (per Unit 810-K1 810-K2 810-K3 810-K4 S1, fixed ft lbs 10³ 40 S1, swing-up ft lbs 10³ 40 S2, fixed ft lbs 10³ 40 S2, swing-up lft bs 10³ 40 Power Consumption / Oil Capacity Unit 810-K1 810-K2 810-K3 810-K4 Working pressure Bar 4714 Tank capacity (fitted on loader) L 14.5 Max. pump performance, 1-curcuit L/min 6.6
20 Section K-MCS / RC Technical Specifications 810K-MCS / RC Metric Specifications PERFORMANCE 810-K1 810-K2 810-K3 810-K4 Loading group (EN12999) HC1 / HD4 Load moment tm Hydraulic reach m Hydraulic telescopic movement mm Lifting capacity, hydraulic kg-m Lifting capacity, manual extensions kg-m Rotational torque, gross knm 8 Rotation Angle º 400 Max. heel at max. load moment º 5 Rotation speed º/s 24 Dimensions Height above chassis mm Width mm 2200 Length, no extra valves mm 661 Length, with extra valves (hose guides) mm 730 Length, with extra valves (int. hose routing) mm 661 Stabilizer spread, S1 (standard) mm 3400 Stabilizer spread, S2 mm 4400 Stabo;ozer s[read. D mm 5200 Weight, basic loader Standare loader 1), excl. stabilizers kg Stabilizers, S1 fixed kg 115 Stabilizers, S1 swing-up kg 120 Stabilizers S2 fixed kg 140 Stabilizer, S2 swing-up kg 145 Stabilizers, D fixed kg 160 Stabilizers, D swing-up kg 165 Mounting kits, 3-bolts kg 45 Mounting kit, 6-bolts kg 55 Tank, excl. oil (fitted on loader) kg 35 Manual extensions kg Oil in loader (slowing postion) kg ) Weights ± 5% because of tolerances for plate thickness.
21 Section K-MCS / RC Technical Specifications 810K-MCS / RC Metric Specifications- continued Weights, equipment 810-K1 810-K2 810-K3 810-K4 1 extra valves, hose guides kg extra valves, hose guides kg extra valve, int. hose routing kg 75 2 extra valves, int. hose routing kg 130 High-pressure filter kg 7 Max. load on stabilizers (per stabilizer cylinder) S1, fixed kn 55 S1, swing-up kn 55 S2, fixed kn 55 S2, swing-up kn 55 Power consumption / oil capacity Working Pressure Bar 325 Tank capacity (fitted on loader) L 55 Max. pump oerformance, 1-curcuit L/min 35
22 Section K-MCS / RC Technical Specifications
23 Section K-MCS/RC Lifting Capacity Charts 810K-MCS/RC Lifting Capacity Charts Section - 4
24 Section K-MCS/RC Lifting Capacity Charts 810K - MCS/RC Lifting Capacity Chart, K1 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 810 MCS-RC K1 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 27 (8.23m) 24 (7.32m) LB KG 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) 9 (2.74m) 6 (1.83m) (0.91m) (0.91m) (1.83m) (2.74m) (3.66m) (4.57m) 18 (5.49m)
25 Section K-MCS/RC Lifting Capacity Charts 810K - MCS/RC Lifting Capacity Chart, K2 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 810 MCS-RC K2 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 33 (10.06m) 30 (9.14m) 27 (8.23m) LB KG 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) 9 (2.74m) 6 (1.83m) 3 (0.91m) (0.91m) (1.83m) (2.74m) (3.66m) (4.57m) 18 (5.49m) 21 (6.40m) 24 (7.32m)
26 Section K-MCS/RC Lifting Capacity Charts 810K - MCS/RC Lifting Capacity Chart, K3 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 810 MCS-RC K3 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 39 (11.89m) 36 (10.97m) 33 (10.06m) 30 (9.14m) 27 (8.23m) 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) (2.74m) 6 (1.83m) 3 (0.91m) (1.83m) (3.66m) 18 (5.49m) 24 (7.32m) 30 (9.14m)
27 Section K-MCS/RC Lifting Capacity Charts 810K - MCS/RC Lifting Capacity Chart, K4 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 810 MCS-RC K4 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 39 (11.89m) 36 (10.97m) LB KG 33 (10.06m) 30 (9.14m) 27 (8.23m) 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) 9 (2.74m) (1.83m) 3 (0.91m) (1.83m) (3.66m) 18 (5.49m) 24 (7.32m) (9.14m) (10.97m)
28 Section K-MCS/RC Lifting Capacity Charts 810K-MCS/RC Lifting Capacity Chart K1 - K4 K1 Lifting capacity with manual extensions Lifting capacity without manual extensions LBS FT KG M 3,6 5,3 7,3 K2 LBS FT KG M 3,7 5,4 7,3 9,1 K3 LBS FT KG M , , , , ,0 K4 LBS FT KG M , , , , , ,8
29 25 This page left intentionally blank
30 26 This page left intentionally blank
31 Section K - RCS TECHNICAL DATA Section K - RCS TECHNICAL DATA Section - 5
32 Section K - RCS TECHNICAL DATA 910K - RCS - Specifications Performance Unit 910-K1 910-K2 910-K3 910-K4 Loading group (EN12999) HC1 / HD5 Load moment ft-lb Hydraulic reach ft Hydraulic telescopic movement ft Lifting capacity, hydraulic lb-ft Lifting capacity, manual extensions lb-ft Rotational torque, gross ft-lb 5900 Rotation angle 400 Max. heel at max. load moment 5 Rotation speed /s 24 Dimensions Unit 910-K1 910-K2 910-K3 910-K4 Height above chassis ft/in Width ft/in 7-2 Length, no extra valves in 26 Length, with extra valves (hose guides) in 29 Length, with extra valves (int. hose routing) in 26 Stabilizer spread, S1 (standard) ft/in 11 2 Stabilizer spread, S2 ft/in 14 5 Stabilizer spread, D ftin 17 1 Weights, basic loader Standare loader 1), excl. stabilizers lb Stabilizers, S1 fixed lb 253 Stabilizers, S1 swing-up lb 265 Stabilizers S2 fixed lb 309 Stabilizer, S2 swing-up lb 320 Stabilizers, D fixed lb 352 Stabilizers, D swing-up lb 363 Mounting kits, 3-bolts lb 99 Mounting kit, 6-bolts lb 121 Tank, excl. oil (fitted on loader) lb 77 Manual extensions lb Oil in loader (slowing postion) lb ) Weights ± 5% because of tolerances for plate thickness
33 Section K - RCS TECHNICAL DATA 910K- RCS Specifications- continued Weights, equipment 910-K1 910-K2 910-K3 910-K4 1 extra valves, hose guides lb extra valves, hose guides lb extra valve, int. hose routing lb extra valves, int. hose routing lb 286 High-pressure filter lb 15 Max. load on stabilizers (per stabilizer cylinder) S1, fixed ft-lbs 10³ 40 S1, swing-up ft-lbs 10³ 40 S2, fixed ft-lbs 10³ 40 S2, swing-up ft-lbs 10³ 40 Power consumption / oil capacity Working Pressure Bar 4714 Tank capacity (fitted on loader) L 14.5 Max. pump oerformance, 1-curcuit L/min 6.6
34 Section K - RCS TECHNICAL DATA 910K-RCS Metric Specifications PERFORMANCE 910-K1 910-K2 910-K3 910-K4 Loading group (EN12999) HC1 / HD5 Load moment tm Hydraulic reach m Hydraulic telescopic movement mm Lifting capacity, hydraulic kg-m Lifting capacity, manual extensions kg-m Rotational torque, gross knm 8 Rotation Angle º 400 Max. heel at max. load moment º 5 Rotation speed º/s 24 Dimensions Height above chassis mm Width mm 2200 Length, no extra valves mm 661 Length, with extra valves (hose guides) mm 730 Length, with extra valves (int. hose routing) mm 661 Stabilizer spread, S1 (standard) mm 3400 Stabilizer spread, S2 mm 4400 Stabo;ozer s[read. D mm 5200 Weight, basic loader Standare loader 1), excl. stabilizers kg Stabilizers, S1 fixed kg 115 Stabilizers, S1 swing-up kg 120 Stabilizers S2 fixed kg 140 Stabilizer, S2 swing-up kg 145 Stabilizers, D fixed kg 160 Stabilizers, D swing-up kg 165 Mounting kits, 3-bolts kg 45 Mounting kit, 6-bolts kg 55 Tank, excl. oil (fitted on loader) kg 35 Manual extensions kg Oil in loader (slowing postion) kg ) Weights ± 5% because of tolerances for plate thickness.
35 Section K - RCS TECHNICAL DATA 910K-RCS Metric Specifications- continued Weights, equipment 910-K1 910-K2 910-K3 910-K4 1 extra valves, hose guides kg extra valves, hose guides kg extra valve, int. hose routing kg 75 2 extra valves, int. hose routing kg 130 High-pressure filter kg 7 Max. load on stabilizers (per stabilizer cylinder) S1, fixed kn 55 S1, swing-up kn 55 S2, fixed kn 55 S2, swing-up kn 55 Power consumption / oil capacity Working Pressure Bar 325 Tank capacity (fitted on loader) L 55 Max. pump oerformance, 1-curcuit L/min 50
36 Section K - RCS TECHNICAL DATA
37 SECTION K - RCS Lifting Capacities 910K - RCS Lifting Capacities SECTION - 6
38 SECTION K - RCS Lifting Capacities 910 RCS Lifting Capacity Chart, K1 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 910K-RCS K1 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 27 (8.23m) 24 (7.32m) LB KG 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) 9 (2.74m) 6 (1.83m) (0.91m) (0.91m) (1.83m) (2.74m) (3.66m) (4.57m) 18 (5.49m)
39 SECTION K - RCS Lifting Capacities 910 RCS Lifting Capacity Chart, K2 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 910K-RCS K2 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 30 (9.14m) 27 (8.23m) LB KG 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) 9 (2.74m) (1.83m) 3 (0.91m) (0.91m) 6 12 (1.83m) 9 (3.66m) (2.74m) 15 (4.57m) 18 (5.49m) 21 (6.40m) 24 (7.32m)
40 SECTION K - RCS Lifting Capacities 910 RCS Lifting Capacity Chart, K3 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 910K-RCS K3 39 (11.89m) 36 (10.97m) 33 (10.06m) Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. LB KG 30 (9.14m) 27 (8.23m) 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) (3.66m) 9 (2.74m) 6 (1.83m) 3 (0.91m) (1.83m) (3.66m) 18 (5.49m) 24 (7.32m) 30 (9.14m)
41 SECTION K - RCS Lifting Capacities 910 RCS Lifting Capacity Chart, K4 IOWA MOLD TOOLING CO., INC. BOX 189 GARNER IA Model 910K - RSC K4 Limit working loads to those shown. Deduct the weight of load handling devices. El peso propio (tara) de los dispositivos de manipulación de cargas es parte de la carga levantada y se debe descontar de la capacidad nominal. 39 (11.89m) 36 (10.97m) LB KG 33 (10.06m) 30 (9.14m) 27 (8.23m) 24 (7.32m) 21 (6.40m) 18 (5.49m) 15 (4.57m) 12 (3.66m) (2.74m) 6 (1.83m) 3 (0.91m) (1.83m) (3.66m) 18 (5.49m) 24 (7.32m) (9.14m) (10.97m)
42 SECTION K - RCS Lifting Capacities 910K-RCS Lifting Capacity Chart K1 - K4 Lifting capacity with manual extensions Lifting capacity without manual extensions K1 LB FT KG M 3,6 5,3 7,3 K2 K3 LB FT KG M , , , ,1 LB FT KG M , , , , ,0 K4 LB FT KG M , , , , , ,8
43 39 This page left intentionally blank
44 40 This page left intentionally blank
45 SECTION K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA 810K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA SECTION - 7
46 SECTION K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA Dimension Sketch: Rotation A (2109mm) 6-11 (1998mm) 6-6 (1793mm) 5-10 TOP CHASSIS (1497mm) 4-10 A 3 (72mm) A-A (3750mm) K1/K2: 6-0 (1840mm) K3: 6-1 (1860mm) K4: 6-2 (1895mm) TOP CHASSIS TOP CHASSIS 2-4 (710mm) C L CHASSIS 1-2 (360mm) 3-5 (1050mm) 6-10 (2100mm) 2-2 (661mm) 2-4 (730mm) 12.4 (317mm)
47 SECTION K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA Rotation Radius D 1-3 R390mm 10.6 R270mm 9.1 R230mm mm mm 11.8 R300mm mm 830mm TOP CHASSIS
48 SECTION K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA Dimension Sketch For Truck Mounted Loader MOUNTING KIT 6 X 7/8 UNF BOLTS. C L CHASSIS Min. 1-6 Min. 500 Max. 3-3 Max Ø1 2 Ø Max Max 1.4 Max Max.35 Max C L CHASSIS NOTES: 1) VALUES DICTATED BY STRENGTH CONSIDERATIONS. 2) DRILL HOLE WHEN ASSEMBLING. KEY: FT / IN mm MOUNTING KIT 3 x M30 x 2 BOLTS 1 Min. 2-0 /Max. 3-3 Min. 620/Max. 1010
49 SECTION K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA Lifting Height at Column L m H1 H2 TOP CHASSIS H1 MM H1 FEET/INCHES H2 MM H2 FEET/INCHES L1 MM L1 FEET/INCHES K K K K
50 SECTION K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA Dimension Sketch: Swing-Up Stabilizer Legs (Manual) 90 TOP CHASSIS
51 SECTION K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA Dimension Sketch: Center of Gravity H2 V2 H1 V1 f C L CHASSIS G1 H4 V2 G2 V3 H3 G3 Z3 MM KG V1 V2 V3 H1 H2 H3 H4 Z3 f G1 G2 G3 610-K K K K FEET/INCHES POUNDS V1 V2 V3 H1 H2 H3 H4 Z3 f G1 G2 G3 610-K K K K
52 SECTION K-MC, 810K-MCS/RC, 910K - RCS TECHNICAL DATA
53 IOWA MOLD TOOLING CO., INC. P.O. Box 189 Garner, IA Tel: Fax: IMT reserves the right to make changes in engineering, design, specifications, add improvements or discontinue manufacturing at any time without notice or obligation. IMT and IMT LOGO are registered trademarks of Iowa Mold Tooling Co., Inc., Garner, IA, USA Iowa Mold Tooling Co., Inc. All Right Reserved.
47/326 Technical Specifications
Manual # 9994953 47/326 Technical Specifications Revision Date 2111214 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 5438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright 211
10/72 Technical Specifications
Manual # 99905403 10/72 Technical Specifications Revision Date 20120202 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
20/138SL Technical Specifications
Manual # 99904617 20/138SL Technical Specifications Revision Date 20120912 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
MATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL
OPERATION : 99903422: 20120920 PAGE - 1 MATERIAL HANDLING SYSTEMS CRANE SPECIFICATIONS & OPERATION MANUAL MODELS 0.5/4, 1.5/10, 2.0/15T, 2.6/19T IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189
Hydraulic Loaders , and Courtesy of Crane.Market
Hydraulic Loaders, 24562 and 28562 Hydraulic Loaders When your application demands precise handling and placement of palletized material even in tight places look to the IMT family of hydraulic loaders.
17/117. Articulating Crane. Courtesy of Crane.Market
17/117 rticulating Crane 17/117 rticulating Crane Standard Features Specifications IMT 17/117 articulating cranes provide premium performance on the job site. With a max lifting capacity of 12,785 (58
Refuse Container with Loader Manual
Part # 99904934 Refuse Container with Loader Manual Operation, Safety, Spare Parts From S/N Refuse3101055 (Revised 20120105) IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX:
Refuse Container with Loader Manual
Part # 99904801 Refuse Container with Loader Manual Operation, Safety, Spare Parts Revised 20111207 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website:
Model 3.1/22 Crane. Manual # Revision Date
Manual # 99903549 Model 3.1/22 Crane Revision Date 20030601 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright 2003 Iowa Mold
HYDRAULIC PUMP SELECTION GUIDE
PSG-CI:99900698: 20070220 1 HYDRAULIC SELECTION GUIDE Cranes Compressors Cranes & Compressors Use of Flow Dividers IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 TEL: 641-923-3711 TECHNICAL
Model 7/51. Instruction Manual
99903276: IM-7/51: 20111201 PAGE 1 Model 7/51 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
Model 9/63. Instruction Manual
99903278 : IM-9/63: PAGE 1: 20111201 Model 9/63 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Not for Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing
MATERIAL HANDLING SYSTEMS INSTALLATION GUIDE CRANE MODELS: 0.5/4 1.5/10 2.0/15T 2.6/19T
INSTALL-MINI : 99903431: 20120920 PAGE - 1 MATERIAL HANDLING SYSTEMS INSTALLATION GUIDE CRANE MODELS: 0.5/4 1.5/10 2.0/15T 2.6/19T IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711
Illustrated Parts List Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and Rating Performance
Illustrated Parts List Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
CONTENTS TM200 TELESCOPIC CRANE
TM200 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Chart: Main Boom & Jib...6 LMI Codes...7 Reeving
Reproduction. Not for. Electric Pressure Washer. Illustrated Parts List. Model Mfg. No. Description ,800 PSI Briggs & Stratton
Illustrated Parts List Electric Pressure Washer Model Mfg. No. Description 020358-0 1,800 PSI Briggs & Stratton This pressure washer is rated in accordance to the Pressure Washer Manufacture Association
Repair Parts Model 4/29 Crane
4/29: 99903041: 20111201 PARTS-1 Repair Parts Model 4/29 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424 MANUAL PART NUMBER: 99903041 Iowa
Grapple Loaders & Forest Trailers
Grapple Loaders & Forest Trailers Pro Serie 2008 Choose a predefined combination or separate Loader and Trailer 1 2 3 4 5 HK 6084HC MV 142HD HK 5282HC MV 132HD HK 5269H MV 112HD HK 4976HC MV 112HD HK 4976HC
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
TC300 SERIES TELESCOPIC CRANE 2 CONTENTS //////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Chassis Data... 5 Outrigger Extension... 6 Sub Frame...6
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and Rating Performance
PRELIMINARY CONTENTS CM190 TELESCOPIC CRANE
CM190 TELESCOPIC CRANE PRELIMINARY CONTENTS /////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7 Reeving Diagram...7
RT 670 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 70 ton @ 9 ft working radius Maximum boom length: 111 ft Maximum tip height: 170 ft CONTENTS Page: Key............................................................................................
Model 5/35. Instruction Manual
99903044: IM-5/35: PAGE 1: 20111201 Model 5/35 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
RT US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.
70 US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: 70 US t @ 9 ft working radius Maximum boom length: 111 ft Maximum tip height: 170 ft 07/26/12, Round 1 CONTENTS
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and Rating Performance
RT 345 XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
USt Lifting Capacity Rough Terrain Crane Datasheet Imperial Features: Rated capacity: USt @ 9 ft working radius Maximum boom length: 5 ft Maximum tip height: 147 ft 1 CONTENTS Page: Key...3 Dimensions
CONTENTS CM300.1 SERIES TELESCOPIC CRANE
CM300.1 SERIES TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features... 4 3051T Chassis... 5 30100C Chassis... 6 Outrigger Extension...
RT XL RT XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
USt Lifting Capacity Rough Terrain Crane Datasheet Imperial Features: Rated capacity: USt @ 9 ft working radius Maximum boom length: 5 ft Maximum tip height: 147 ft 1 CONTENTS Page: Key............................................................................................
Illustrated Parts List Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
RT US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
US t Liing Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ 9 working radius Maximum boom length: 111 Maximum tip height: 1 CONTENTS Page: Key...3 Dimensions Crane dimensions....4
16000SIII Automatic Grease System
Manual # 99905495 16000SIII Automatic Grease System Effective 20120716 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website: http://www.imt.com Copyright
Illustrated Parts List. Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7
RT230XL RT 230 XL. Rough Terrain Crane Datasheet imperial. Features: Rated capacity: ft working radius. Maximum boom length: 100 ft
Rough Terrain Crane Datasheet imperial RT230XL Features: Rated capacity: 30 ton @ 10 ft working radius Maximum boom length: 100 ft Maximum tip height: 140 ft CONTENTS Key............................................................................................
PRELIMINARY CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.
80T capacity class Boom Truck Crane Datasheet imperial PRELIMINARY Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional
Illustrated Parts List. Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accocrdance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and Rating Performance
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
MATERIAL HANDLER MHL360 F HD. Features. Specifications
MHL360 F HD MATERIAL HANDLER Features Fuel saving ECO & ECO+ operating modes enhance flexibility while reducing operating costs Powerful, fuel efficient 255 hp 190 kw engine matched with hydraulic functions
CROSSOVER 8000 CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. Features
80T capacity class Boom Truck Crane Datasheet imperial PRE AR N I M LI Y Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional
Cranes. Range Diagram and Lifting Capacity RT345-1XL 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM
Range Diagram and Lifting Capacity RT345-1XL Cranes 45 TON LIFTING CAPACITY RANGE DIAGRAM 33.75' - 105' BOOM DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK
CD225 CAB DOWN CRANE CD225 DATASHEET - IMPERIAL. View thousands of Crane Specifications on FreeCraneSpecs.com. Features:
CAB DOWN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 25 ton @ 10 ft working radius Maximum boom length: 72 ft Maximum tip height: 121 ft CONTENTS Key............................................................................................
IMT Bead Breaker 1000
Manual Part Number 99903638 IMT Bead Breaker 000 Revised 2050423 Copyright 204 Iowa Mold Tooling Co., Inc. All rights reserved IOWA MOLD TOOLING CO., INC. PO Box 89 Garner, IA 50438 Tel: 64-923-37 FAX:
Illustrated Parts List
Illustrated Parts List 030437-0 This generator is rated in accocrdance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment away!
CROSSOVER Datasheet imperial. Boom Truck Crane 60T capacity class. Features
Boom Truck Crane T capacity class Datasheet imperial Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 115 maximum tip height 32/57 optional jib 1 maximum sheave
Courtesy of Crane.Market
CM19 TELESCOPIC CRANE PRELIMINARY CONTENTS / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Crane Features...4 Boom Diagram...5 Load
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
CROSSOVER 4500L. 45T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.
45T capacity class Boom Truck Crane Datasheet imperial Features 45 ton rated capacity @ 9 ft from center of rotation 129 ft maximum boom length 136 ft maximum tip height 32/49 ft optional jib 183 ft maximum
LINK-BELT LARGE TELESCOPIC BOOM CRANE SWING CAB (TLL)
LOAD CHARTS for Use in CCO Written Examinations LINK-BELT LARGE TELESCOPIC BOOM CRANE SWING CAB (TLL) This load chart has been adapted from the original manufacturer s load chart for use in CCO written
UPTime is the Manitex commitment to complete support of thousands of units working every day.
UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.manitex.com MTX CM50 1 PC-EN-V1-1113
RT USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
55 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial www.terexcranes.com Features: Rated capacity: 55 USt @ ft working radius Maximum boom length: 1 ft Maximum tip height: 1 ft 1 CONTENTS Page:
Illustrated Parts List Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
CROSSOVER T capacity class Boom truck crane Datasheet imperial
80T capacity class Boom truck crane Datasheet imperial Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional jib 190 ft maximum
Repair Parts Model 0.5/4 Crane
MODEL 0.5/4 : 99903420: 20111129 PAGE - 1 MATERIAL HANDLING SYSTEMS Repair Parts Model 0.5/4 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 MANUAL PART NO: 99903420 Iowa
GIUFFRE.1 BT 3870 GIUFFRE BROS CRANES INC. BT To learn more about this model, call or visit giuffre.com today!
19 US t Lifting Capacity Boom Truck Cranes Datasheet Imperial Features: 19 US t @ ft capacity at rated distance from center of rotation 70 ft maximum boom length 80 ft maximum tip height Optional single
RT ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 55 ton @ ft working radius Maximum boom length: 1 ft Maximum tip height: 1 ft CONTENTS Page: Key............................................................................................
LINK-BELT. These charts are not to be used for any other purpose. LOAD CHARTS for Use in CCO Written Examinations
LOAD CHARTS for Use in CCO Written Examinations LINK-BELT TELESCOPIC BOOM CRANE SWING CAB (TLL) These charts have been adapted from the original manufacturer s charts for use in NCCCO Written Examinations.
Adept Machines. PRO SERIES GRAPPLE LOADERS. Grapple Loaders & Forestry Trailers & FORESTRY TRAILERS HK 5070 HK 5076 HK 5469 HK 5482 HK 6184
FOREST LINE Grapple Loaders & Forestry Trailers HK 5070 HK 5076 HK 5469 HK 5482 MV 1230 MV 1230HD MV 1330 MV 1330HD MV 1530 MV 1530HD GRAPPLE LOADERS & FORESTRY TRAILERS Adept Machines. 1 Adept Machines
Illustrated Parts List. Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
Illustrated Parts List. Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
Illustrated Parts List. Pressure Washer / Lavadora de Presión
Illustrated Parts List Pressure Washer / Lavadora de Presión Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101 (Testing and
28' 6" (8700) 17' 6" (5340) 11' (3360) Ra 37' 1" (11 310) R 39' 8" (12 110) 16' 3" (4960) 28' 6" (8700) 64' 7" (19 680) 50' 9" (15 460)
Dimensions 17' 6" (5340) 28' 6" (8700) 11' (3360) 9' (2740) R 39' 8" (12 110) Ra 37' 1" (11 310) R 20' 10" (6345) R 18' 4" (5580) R 15' 9" (4800) 10' (3070) 14' 5" (4400) 19' 8" (6000) 27' 11" (8500) R
PK 600 TK / PK 800 TK
PK 600 TK / PK 800 TK SOARING ABOVE WITH ASSEMBLY CRANES FROM PALFINGER MAXIMUM SPEED AND WORKING HEIGHT The PK 600 TK is the ideal assembly crane, thanks to its quick movements and precise controls. It
BT 3870 BOOM TRUCK CRANE BT Features:
BOOM TRUCK CRANE Data Sheet - Imperial Features: Capacity at rated distance from center of rotation: 19 T @ 5 ft Maximum boom length: 70 ft Maximum tip height: 80 ft Optional Single Stage 24 ft or 24-40
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM
TC500 SERIES TELESCOPIC CRANE CONTENTS 2 /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
CROSSOVER T capacity class Boom truck crane Datasheet imperial
CROSSOVER 00 T capacity class Boom truck crane Datasheet imperial CROSSOVER 00 Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 118 maximum tip height 32/57
CONTENTS TC500 SERIES TELESCOPIC CRANE
CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// KEY ///////////////////////////////////////////////////////////////////////////////////////////////////////////////
UPTime is the Manitex commitment to complete support of thousands of units working every day.
UPTime is the Manitex commitment to complete support of thousands of units working every day. MANITEX 3000 South Austin Avenue Georgetown, Texas 78626 1-877-314-3390 www.manitex.com MTX-M150-PC-EN-V2-0614
JCB MINI EXCAVATORS 8025 ZTS / 8030 ZTS / 8035 ZTS
OPERATING WEIGHT: 5919 lb (685 kg) 709 lb (317 kg) 8049 lb (3651 kg) NET ENGINE POWER: 6.8 hp (0.1 kw) 6.8 hp (0.1kW) 30.4 hp (.7 kw) Interim Tier IV D F K 805 C C G L H I A B E J STATIC DIMENSIONS ft-in
Model 11/76. Instruction Manual
99903048: IM-11/76: PAGE 1: 20111201 Model 11/76 Instruction Manual NOTE Read and understand this manual, the IMT Operators Crane Safety Manual and Safety Manual Supplement before operating or maintaining
AT40 ALL TERRAIN DIRECTIONAL DRILL
AT0 ALL TERRAIN DIRECTIONAL DRILL TRENCHLESS AT0 ALL TERRAIN DIRECTIONAL DRILL The fully enclosed cab is rated best in the industry based on customer input, and designed specifically with an HDD operator
Repair Parts Model 14/103 Crane
14/103: 99903051: 20140911 PARTS-1 Repair Parts Model 14/103 Crane IOWA MOLD TOOLING CO., INC. BOX 189, GARNER, IA 50438-0189 641-923-3711 TECHNICAL SUPPORT FAX: 641-923-2424 MANUAL PART NUMBER: 99903051
CONTENTS TC700 SERIES TELESCOPIC CRANE
TC700 SERIES TELESCOPIC CRANE CONTENTS //////////////////////////////////////////////////////////////////// Crane Features... 4 Range Diagram... 5 Load Chart: Main Boom... 6 Load Chart: Main Boom... 7
Illustrated Parts List Pressure Washer / Lavadora de Presión. Pressure Washer
Illustrated Parts List Pressure Washer / Lavadora de Presión Pressure Washer Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101
Engine Function Module (EFM) Manual
MY 2011 - Present (Manual # 99905297) Engine Function Module (EFM) Manual Model Year 2011 - Present Revised 20140609 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424
RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
BT 3870 BT US t Lifting Capacity Boom Truck Cranes Datasheet Imperial. Features:
19 US t Liing Capacity Boom Truck Cranes Datasheet Imperial S model Features: 19 US t @ capacity at rated distance from center of rotation maximum boom length 0 maximum tip height Optional single stage
CraneSafe. Certification. CraneSafe. Certification CraneSafe Certification
LOAD CHART & RIGGING PRACTICE EXERCISE FOLDING BOOM TRUCK CRANE 11 Tonnes & Under Hiab XS 335K Hiab 175 Effer 145.00 5S Folding Boom PRACTICE EXERCISE LCR.FB11.HBXS335K.HB175.EF145005S.PEX1 26 March 2010
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
RC 5500 SERIES. Profile Sheet Stand-Up Rider Lift Truck
RC 5500 SERIES Profile Sheet Stand-Up Rider Lift Truck 4" (100 mm) 42" (1065 mm) 8" (205 mm) 33" (840 mm) 21 48" (1220 mm) 88" (2235 mm) Standard - 79.4" (2015 mm) Head Clearance 84.5" (2145 mm) Optional
Illustrated Parts List. Portable Generator
Illustrated Parts List Portable Generator This generator is rated in accordance with CSA (Canadian Standards Association) standard C22.2 No. 100-94 (motor and generators). Questions? Help is just a moment
To learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity
Boom Truck Crane TRUCK CRANE FEATURES 34,000 Ib (13 607 kg) maximum lifting capacity 80 (24.38 m) maximum sheave height 120 (36.57 m) maximum sheave height with 24-40 (7.31-12.19 m) jib 27-70 (82.30-21.34
LINK-BELT (Rough Terrain) LOAD CHART
For Use in CCO Written Examinations LINK-BELT (Rough Terrain) LOAD CHART TELESCOPIC BOOM CRANE SWING CAB (TLL) These charts have been adapted from the original manufacturer s charts for use in CCO Written
T US t Lifting Capacity Truck Crane Datasheet Imperial. Features: T 560-1
T 5-1 US t Liing Capacity Truck Crane Datasheet Imperial T 5-1 Features: T 5-1 US t maximum liing capacity 1 maximum boom length 1 maximum tip height Air-ride suspension Travel speeds up to mph CONTENTS
bt USt Lifting Capacity Boom Truck Cranes Datasheet Imperial View thousands of Crane Specifications on FreeCraneSpecs.
28 USt Lifting Capacity Boom Truck Cranes Datasheet Imperial bt 28106 Features 28 USt @ 6 ft capacity at rated distance from center of rotation 106 ft maximum boom length 115 ft maximum tip height 30/47
MATERIAL HANDLER MHL360 E. Specifications. Features. Up to 59 ft 18 m
MHL36 E MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach Features 1,5 lbs 46 t 255 hp 19 kw Up to 59 ft 18 m Fuel saving ECO & ECO+ operating modes enhance flexibility while
301.4C. Mini Hydraulic Excavator
301.4C Mini Hydraulic Excavator Engine Gross Power 17.9 kw 24.3 hp Weight Transport Weight with Canopy 1380 kg 3,042 lb Transport Weight with Cab 1470 kg 3,241 lb Versatility Easy to transport and greater
CONTENTS TC500 SERIES TELESCOPIC CRANE
TC500 SERIES TELESCOPIC CRANE CONTENTS /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 5096S Chassis Data - S Models...
T T US t Lifting Capacity Truck Crane Datasheet Imperial. Features: T 780-1
80 US t Liing Capacity Truck Crane Datasheet Imperial Features: 80 US t maximum liing capacity 126 maximum boom length 133 maximum tip height Engine configurations up to 500 hp Automatic and manual transmission
301.4C. Mini Hydraulic Excavator
301.4C Mini Hydraulic Excavator Engine Net Power 13.2 kw 17.7 hp Weight Transport Weight with Canopy 1380 kg 3,042 lb Transport Weight with Cab 1470 kg 3,241 lb Versatility Easy to transport and greater
Isuzu BB-6BG1T 396 CID (6.5 L) 138 HP (103 1,950 rpm 392 lbf ft (532 1,600 rpm
Specifications Engine Electronic engine control, water cooled, 4-cycle diesel, 6 cylinder, turbocharged. Model Displacement Net horsepower Torque 210TL 240TL 290TL 350TL 370TL Isuzu BB-6BG1T 396 CID (6.5
Illustrated Parts List Pressure Washer / Lavadora de Presión. Pressure Washer
Illustrated Parts List Pressure Washer / Lavadora de Presión Pressure Washer Model / Modelo This pressure washer is rated in accordance to the Pressure Washer Manufacture Association (PWMA) Standard PW101
data GMK7550 product guide contents features 550 ton (450 mton) capacity All Terrain Crane 197 ft (60 m) 5 section full power boom
data features 5 ton (4 mton) capacity 197 ft ( m) 5 section full power boom Patented TWIN-LOCKTM boom pinning system 82 ft - ft (25 m - 73 m) lattice luffing jib 39 ft - ft (12 m - m) fixed lattice jib
A Product of Hard Work COMPACT LOADING SHOVEL 403
A Product of Hard Work Go anywhere, do anything compact performance Compact dimensions allow the 403 to access restricted farm buildings and other sites Hydrostatic transmission makes it easy for anyone
Refuse Container-Loader Installation Manual (G2)
Part # 99905053 Refuse Container-Loader Installation Manual (G2) Generation 2 Installation Rev 20101201 IOWA MOLD TOOLING CO., INC. PO Box 189 Garner, IA 50438 Tel: 641-923-3711 FAX: 641-923-2424 Website:
Crane Safety Manual. Supplement
99903054: SM-MHS: PAGE 1: 20131212 Crane Safety Manual Supplement This manual is provided as a supplement to the IMT Operators Crane Safety Manual and is applicable to the following material handling crane