PC490LC-10. Hydraulic Excavator PC 490. High Reach Demolition Specification

Transcription

1 P 490 Hydraulic Excavator P490L-10 High Reach Demolition Specification ENGINE POWER 270 kw / rpm OPERTING WEIGHT kg MX. TTHMENT WEIGHT Medium Reach Demolition: kg High Reach Demolition: kg

2 Specifications ENGINE Model...Komatsu S6D125E-6- Type...ommon rail direct injection, water-cooled, emissionised, turbocharged, after-cooled diesel Engine power at rated engine speed rpm ISO kw/362 HP ISO 9249 (net engine power) kw/359 HP No. of cylinders...6 ore stroke mm Displacement...11,04 ltr attery V/110 h lternator V/60 Starter motor V/11 kw ir filter type...double element type with monitor panel dust indicator and auto dust evacuator ooling... Suction type cooling fan with radiator fly screen Fan drive type... Hydraulic, reversible HYDRULI SYSTEM Type...HydrauMind. losed-centre system with load sensing and pressure compensation valves dditional circuits...2 additional circuits with proportional control are installed Main pump...2 variable displacement piston pumps supplying boom, arm, bucket, swing and travel circuits Maximum pump flow ltr/min Relief valve settings Implement kg/cm² Travel kg/cm² Swing kg/cm² Pilot circuit...33 kg/cm² SWING SYSTEM Type...xial piston motor driving through planetary double reduction gearbox Swing lock...electrically actuated wet multi-disc brake integrated into swing motor Swing speed Medium or High reach demolition equipment ,0 rpm Excavation boom equipment ,4 rpm Swing torque knm DRIVES ND RKES Steering control...2 levers with pedals giving full independent control of each track Drive method... Hydrostatic Travel operation...utomatic 3-speed selection Max. travel speeds Lo / Mi / Hi... 3,0 / 4,2 / 5,5 km/h Maximum drawbar pull kg rake system... Hydraulically operated discs in each travel motor SERVIE REFILL PITIES Fuel tank ltr Radiator...44,0 ltr Engine oil...37,0 ltr Swing drive...20,0 ltr Hydraulic tank ltr Final drive (each side)...10,5 ltr ENVIRONMENT UNDERRRIGE onstruction... X-frame centre section with box section track frames Track assembly Type...Fully sealed Shoes (each side)...49 Tension...ombined spring and hydraulic unit Rollers Track rollers (each side)...8 arrier rollers (each side)...2 Engine emissions...fully complies with EU Stage III exhaust emission regulations Noise levels Lw external d() (2000/14/E Stage II) Lp operator ear...71 d() (ISO 6396 dynamic test) Vibration levels (EN 12096:1997) Hand/arm... 2,5 m/s² (uncertainty K = 0,25 m/s²) ody... 0,5 m/s² (uncertainty K = 0,10 m/s²) ontains fluorinated greenhouse gas HF-134a (GWP 1430). Quantity of gas 1,0 kg, O 2 equivalent 1,43 t. Operating weight, including specified work equipment, operator, lubricant, coolant, full fuel tank and the standard equipment: - High Reach Demolition includes attachment weight of kg - Medium Reach Demolition includes attachment weight of kg - Excavation boom includes 3,4 m arm and kg bucket 2 OPERTING WEIGHT (PPR.) Triple grouser shoes HIGH REH DEMOLITION MEDIUM REH DEMOLITION EXVTION OOM Operating weight Ground pressure Operating weight Ground pressure Operating weight Ground pressure 600 mm kg 1,18 kg/cm² kg 1,20 kg/cm² kg 1,01 kg/cm² 700 mm kg 1,02 kg/cm² kg 1,04 kg/cm² kg 0,87 kg/cm² 700 mm HWG kg 1,03 kg/cm² kg 1,04 kg/cm² kg 0,88 kg/cm²

3 Dimensions MHINE DIMENSIONS EXVTION OOM Demolition 1st boom E Excavation arm F Excavation boom Mid link High reach demolition 2nd boom D HIGH REH DEMOLITION MEDIUM REH DEMOLITION Excavation boom Demolition arm Extension boom EQUIPMENT EXVTION OOM MEDIUM REH DEMOLITION HIGH REH DEMOLITION Overall height (to top of hose) mm mm mm Overall height (to top of boom) mm mm mm Overall length mm mm mm D Tip radius mm - - Width (incl. equipment stand) mm mm mm High reach demolition 2nd boom weight kg Excavation boom weight kg kg - Extension boom weight kg - Mid link weight kg rm weight kg kg kg Total weight with equipment stand kg kg kg Total weight without equipment stand kg kg kg MHINE DIMENSIONS HRD (L) HRD (HWG) E Transport length mm mm F Overall height of cab (with FOPS) mm mm Overall height of cab (without FOPS) mm mm Transport weight (with 700 mm shoes, not including additional counterweight) kg kg dditional counterweight ( mm) kg kg 3

4 Transport Dimensions M E O F N H I O P M D P G J L K N TRNSPORT DIMENSIONS HIGH REH DEMOLITION HIGH REH DEMOLITION MEDIUM REH DEMOLITION MEDIUM REH DEMOLITION Undercarriage L HWG L HWG Overall width of upper structure 1) mm mm mm mm Overall height of cab, with FOPS mm mm mm mm Overall height of cab, without FOPS mm mm mm mm Overall length of basic machine mm mm mm mm D Tail length mm mm mm mm E learance under counterweight mm mm mm mm F Machine tail height mm mm mm mm G Ground clearance 700 mm 500 mm 700 mm 500 mm H Tumbler centre distance mm mm mm mm I Track length mm mm mm mm J Track gauge 2) mm mm mm mm K Track shoe width 600 mm, 700 mm 700 mm 600 mm, 700 mm 700 mm L Overall track width with 600 mm shoes 2) mm mm - Overall track width with 700 mm shoes 2) mm mm mm mm M Transport length mm mm mm mm N Length on ground (transport) mm mm mm mm O Overall height (to top of boom) mm mm mm mm P Overall height (to top of hose) mm mm mm mm 1) Overall width of upper structure excludes side guards, handrails and mirrors. Side guards can be removed if transport width of less than 3 m is required. 2) Undercarriage in retracted extended position 4

5 EXVTION OOM RNKED POSITION M P O N RM LENGTH 3,4 m Undercarriage L HWG M Overall transport length mm mm N Transport length on ground mm mm Transport height (to top of cab, with FOPS) mm mm Transport height (to top of cab, without FOPS) mm mm O Transport height (to top of boom) mm mm P Transport height (to top of hose) mm mm EXVTION OOM STRIGHT POSITION M P O N RM LENGTH 3,4 m Undercarriage L HWG M Overall transport length mm mm N Transport length on ground mm mm Transport height (to top of cab, with FOPS) mm mm Transport height (to top of cab, without FOPS) mm mm O Transport height (to top of boom) mm mm P Transport height (to top of hose) mm mm 5

6 Working Range HIGH REH DEMOLITION 30 m 28 m 26 m 24 m 22 m 20 m 18 m 16 m 14 m 12 m 10 m 8 m 6 m 4 m 2 m 24 m 22 m 20 m 16 m 14 m 12 m 10 m 8 m 6 m 4 m 2 m kg kg max HIGH REH DEMOLITION Max. height (to pin at arm end) Max. forward reach (max. tool weight) Min. swing radius of arm end pin at max. height Tail swing radius Height at max. reach (max. tool weight) mm mm mm mm mm Min. boom angle from ground at max. height 84 Max. height (2:1 line) Reach at max. height (2:1 line) mm mm For operator and jobsite safety, Komatsu recommends that high reach demolition machines work in line with the trackframe where ever possible. 6

7 MEDIUM REH DEMOLITION STRIGHT POSITION 22 m 20 m 18 m 16 m 14 m 12 m 10 m 8 m 6 m 4 m 2 m 14 m kg kg kg 10 m 8 m 6 m 4 m 2 m MEDIUM REH DEMOLITION STRIGHT POSITION Max. height (to pin at arm end) mm Max. forward reach (max. tool weight) mm Min. swing radius of arm end pin at max. height mm Tail swing radius mm Height at max. reach (max. tool weight) mm Min. boom angle from ground at max. height 84 Max. height (2:1 line) mm Reach at max. height (2:1 line) mm For operator and jobsite safety, Komatsu recommends that high reach demolition machines work in line with the trackframe where ever possible. 7

8 Working Range MEDIUM REH DEMOLITION RNKED POSITION 22 m 20 m 18 m 16 m 14 m 12 m 10 m 8 m 6 m 4 m 2 m 14 m kg kg kg 10 m 8 m 6 m 4 m 2 m MEDIUM REH DEMOLITION RNKED POSITION Max. height (to pin at arm end) mm Max. forward reach (max. tool weight) mm Min. swing radius of arm end pin at max. height mm Tail swing radius mm Height at max. reach (max. tool weight) mm Min. boom angle from ground at max. height 84 Max. height (2:1 line) mm Reach at max. height (2:1 line) mm For operator and jobsite safety, Komatsu recommends that high reach demolition machines work in line with the trackframe where ever possible. 8

9 EXVTION OOM RNKED POSITION G 12 m 10 m 8m H 6m 4m 2m G. L D -2 m -4 m -6 m -8 m 12 m 10 m 8m 6m 4m 2m F E RM LENGTH 3,4 m Max. digging height mm Max. dumping height mm Max. digging depth mm D Max. vertical wall digging depth mm E Max. digging reach mm F Max. digging reach at ground level mm G Min. swing radius (bucket loaded) mm H Tail swing radius mm 9

10 Working Range EXVTION OOM STRIGHT POSITION G 16 m 14 m 12 m 10 m 8 m 6 m H 4 m 2 m G. L D -2 m -4 m -6 m -8 m 12 m 10 m 8 m 6 m 4 m 2 m F E RM LENGTH 3,4 m Max. digging height mm Max. dumping height mm Max. digging depth mm D Max. vertical wall digging depth mm E Max. digging reach mm F Max. digging reach at ground level mm G Min. swing radius (bucket loaded) mm H Tail swing radius mm 10

11 Lifting apacity Reach from swing center ucket hook height Lifting capacities Rating over front Rating over side Rating at maximum reach With 600 mm shoes When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights. EXVTION OOM RNKED POSITION rm length 10,5 m 9,0 m 7,5 m 6,0 m 4,5 m 3,4 m kg 9,0 m kg 6.000* 6.000* 8.650* 8.650* 7,5 m kg 5.900* 5.900* 7.100* 7.100* * * 6,0 m kg 6.050* 6.050* * * * * 4,5 m kg 6.400* * * * ,0 m kg 7.000* * * * * 1,5 m kg 7.650* ,0 m kg * * -1,5 m kg * * -3,0 m kg * * ,5 m kg * * * * EXVTION OOM STRIGHT POSITION rm length 10,5 m 9,0 m 7,5 m 6,0 m 4,5 m 3,4 m kg 9,0 m kg 6.250* 6.250* * * * * 7,5 m kg 5.950* * * * * * * * 6,0 m kg 5.900* * * * * 4,5 m kg 6.000* * ,0 m kg 6.250* ,5 m kg 6.600* ,0 m kg 7.250* * ,5 m kg 7.200* * * ,0 m kg 9.500* * * * Load is limited by hydraulic capacity rather than tipping. Ratings are based on SE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. Lifting capacities are stated in kg, on the tip of the arm, for machine on firm, level supporting surface. 11

12 P490L-10 High Reach Demolition Specification Standard and Optional Equipment ENGINE Komatsu S6D125E-6- turbocharged common rail direct injection diesel engine EU Stage III compliant Remote hydraulically driven, variable speed, reversible cooling fan utomatic engine warm-up system Engine overheat prevention system Fuel control dial uto-deceleration function Engine key stop Engine ignition can be password secured on request lternator 24 V/60 Starter motor 24 V/11 kw atteries 2 12 V/110 h HYDRULI SYSTEM Electronic closed-centre load sensing (E-LSS) hydraulic system (HydrauMind) Pump and engine mutual control (PEM) system 6-working mode selection system; power mode, economy mode, breaker mode, attachment power and attachment economy mode, and lifting mode PowerMax function Two-mode boom control In-line filter for hydraulics Two additional service valves (full flow) One additional service valve (1/2 flow) Drain circuit for hydraulic attachment rotation motors UNDERRRIGE Track roller guards Track frame under-guards Hydraulic adjustable wide gauge (HWG) undercarriage 600, 700 mm triple grouser track shoes (HWG: 700 mm only) Full length track roller guards (not with HWG) SERVIE ND MINTENNE utomatic fuel line de-aeration Double element type air cleaner with dust indicator and auto dust evacuator KOMTRX Komatsu wireless monitoring system Multi-function video compatible colour monitor with Equipment Management and Monitoring System (EMMS) and efficiency guidance Toolkit Service points IN Demolition specification Safety Spaceab, with ISO10262 level 2 FOPS guards and roof screen wash wipe system. Fixed, one piece front window. SFETY EQUIPMENT Working range indicator (WRI) system with full colour graphical display and warning buzzer. 15 attachment memory settings Front and roof window fitted with high impact Rear view camera system protective laminated glass, compliant with EN356 dditional camera, right side mounted Grade P5, in accordance with EN474 Part 1; nnex G. Emergency engine stop switch Tilting cab, controlled by wrist controller buttons, with soft start/soft stop function, including hydraulic power hoses and cab raise cylinders Electric horn Lockable fuel cap and covers udible travel alarm Heated, high back air suspension seat with lumbar oom, arm and mid link safety valves, compliant support, console mounted height adjustable arm with EN474 Part 1 : nnex G rests, and retractable seat belt Large handrails, rear-view mirrors utomatic climate control system attery main switch 12/24 Volt power supplies everage holder and magazine rack Hot and cool box DRIVES ND RKES Radio Hydrostatic, 3-speed travel system with automatic uxiliary input (MP3 jack) shift and planetary gear type final drives, and hydraulic travel and parking brakes PP control levers and pedals for steering and WORK EQUIPMENT travel Demolition 1st boom: PP pedal for high reach demolition mid link Includes demolition 1st boom, fitted with Komatsu hydraulic quick connect system and hydraulic pipework suitable for operation of rotating crusher attachment OTHER EQUIPMENT Heavy duty revolving frame with heavy duty High Reach Demolition: demolition under covers and side guard protection Includes heavy duty demolition 2nd boom, heavy duty mid link and heavy duty demolition arm, ounterweight prepared for demolition to fit onto demolition 1st boom. Includes work counterweight equipment stands compliant with EN474 Part 1 : Remote greasing for swing circle and pins nnex G Electric refuelling pump with automatic shut off function Standard colour scheme and decals Parts book and operator manual dditional counterweight. To fit into main demolition counterweight when high reach or medium reach demolition equipment is installed. Removable for excavation operations iodegradable oil for hydraulic system ustomised paint Medium Reach Demolition: Includes extension boom to fit onto demolition 1st boom, with Komatsu hydraulic quick connect system, demolition digging boom and mm arm, piping for hydraulic quick-coupler, arm cylinder safety valve. Includes work equipment stands compliant with EN474 Part 1 : nnex G Excavation boom: Includes two position excavation boom to fit onto demolition 1st boom, mm arm, with piping for hydraulic quick-coupler, arm cylinder safety valve. Includes work equipment stands compliant with EN474 Part 1 : nnex G Komatsu buckets LIGHTING SYSTEM Working lights: 2 revolving frame lights and 2 boom lights, 4 cab roof (front) lights, 1 cab roof (rear) light, 1 counterweight (rear) light, 2 high reach arm lights Further equipment on request standard equipment optional equipment Your Komatsu partner: Komatsu Europe International NV Mechelsesteenweg VILVOORDE (ELGIUM) Tel Fax UENSS /2017 Materials and specifications are subject to change without notice. is a trademark of Komatsu Ltd. Japan. Printed in Europe This specification sheet may contain attachments and optional equipment that are not available in your area. Please consult your local Komatsu distributor for those items you may require. Materials and specifications are subject to change without notice.