PC600LC-8. FLYWHEEL HORSEPOWER 320 kw rpm OPERATING WEIGHT kg 126, ,280 lb

Size: px
Start display at page:

Download "PC600LC-8. FLYWHEEL HORSEPOWER 320 kw rpm OPERATING WEIGHT kg 126, ,280 lb"

Transcription

1 FLYWHEEL HORSEPOWER 320 kw rpm OPERATING WEIGHT kg 126, ,280 lb PC600LC-8 UCKET CAPACITY m yd 3 PC 600 LC Photo may include optional equipment. HYDRAULIC EXCAVATOR

2 PC600LC-8 H YDRAULIC E XCAVATOR WALK-AROUND Productivity Features High Work Equipment Speed Increased arm dumping and bucket dumping speed yields efficient loading operation Lifting Mode Lifting mode increases lifting force and capacity by 17% Large Digging Force Pressing the Power Max button temporarily increases digging force by 8% Two-mode Setting for oom Switch selection allows either powerful digging or smooth boom operation Excellent Swing Performance is achieved by twin-swing motor system Large Drawbar Pull and Steering Force provides excellent mobility Excellent Reliability and Durability Strengthened oom and Arm Fuel Pre-filter with water separator equipped as standard O-ring Face Seals, which have excellent sealing performance, are used for the hydraulic hoses High-pressure In-line Filtration The cool-running hydraulic system is protected with the most extensive filtration system available, including a high pressure in-line filter for each main pump Highly Reliable Electronic Devices Exclusively designed electronic devices have passed severe testing. Controllers Sensors Connectors Heat resistant wiring Easy Maintenance Easy Cleaning of Cooling Unit Reversing fan function facilitates radiator and oil cooler cleaning Radiator and oil cooler are easily serviced with full open type engine hood Centralized Arrangement of Engine Checkpoints New slip-resistant plates for improved foot traction during maintenance Large Handrails, Steps, and Catwalk provide easy access to the engine and hydraulic equipment TM KOMTRAX equipped machines can send location, SMR and operation maps to a secure website utilizing wireless technology. Additionally, most Step II capable machines can relay error codes, cautions, maintenance items, fuel levels, and much more. 2

3 H YDRAULIC E XCAVATOR PC600LC-8 FLYWHEEL HORSEPOWER 320 kw rpm Ecology and Economy Features Komatsu SAA6D140E-5 Engine is EPA Tier 3 and EU stage 3A emission certified World s first cooled EGR system with bypass-assist type electronically controlled venturi Offers high power and low fuel consumption, while conforming to Tier 3 emission regulations Reduces NOx emissions by approximately 40% Equipped with an electronically controlled variable speed fan Economy mode Four-level Setting Enables operator to select the appropriate Economy mode level to match production requirement with lowest fuel consumption Reduction of Ambient Noise Meets the EU Tier 2 noise regulations. Electronically controlled variable speed fan drive Large hybrid fan Low-noise muffler and noise reducing cover around the muffler OPERATING WEIGHT kg 126, ,280 lb UCKET CAPACITY m yd 3 Working Environment Large Comfortable Cab Low noise and vibration with cab damper mounting Large-capacity auto air conditioner Pressurized cab prevents external dust from entering Cab top guard level 2 (ISO standard) capable with optional bolt-on top guard Photo may include optional equipment. Advanced Monitor Features Machine condition can be checked with Equipment Management Monitoring System (EMMS) Two working modes combine with lifting mode for maximum productivity 3

4 PC600LC-8 H YDRAULIC E XCAVATOR PRODUCTIVITY FEATURES LCD color monitor Hydraulic control valve Hydraulic system controller Komatsu s new ecot3 engines are designed to deliver optimum performance under the toughest of conditions, while meeting the latest environmental regulations. This engine is Tier 3 EPA, EU Stage 3A and Japan emissions certified; ecot3 - ecology and economy combined with Komatsu technology to create a high performance engine without sacrificing power or productivity. Main pump Pump for fan Electronically controlled variable speed fan Electronic control unit for engine Engine Heavy duty HPCR (High Pressure Common Rail) system Electronically controlled cooled EGR system Environment-Friendly Clean Engine The PC600LC-8, which is equipped with the Komatsu SAA6D140E-5 engine, is EPA Tier 3 and EU stage 3A emission certified. The SAA6D140E-5 engine adopts the world s first cooled EGR system with electronically controlled bypass-assist type venturi to reduce NOx emission by 40%, while maintaining high power and low fuel consumption. Electronically Controlled Variable Speed Fan Contributes to Low Fuel Consumption and Low Noise The electronic control system sets the rotational speed of the cooling fan according to the coolant and hydraulic oil temperatures, effectively uses the engine output to prevent wasteful fuel consumption, and reduces noise during low-speed fan rotation. Lower and Economical Fuel Consumption Using Economy Mode Enables operator to set the Eco mode to up to four levels according to working conditions so that production requirement is achieved at lowest possible fuel consumption. Image photo may differ from the actual engine. Reduction of Ambient Noise Reduced noise by adoption of an electronically controlled variable speed fan drive, large hybrid fan, low-noise muffler and cover, to meet EU Tier 2 noise regulations. 4

5 H YDRAULIC E XCAVATOR PC600LC-8 Work Equipment Speed Increased An arm quick return circuit is provided for arm dumping. This returns a portion of oil flow directly to the hydraulic tank at arm dumping to reduce hydraulic pressure loss. Combined with increased bucket dumping speed, faster loading work is realized. Large Drawbar Pull and Steering Force Since the machine has a large drawbar pull and a high steering force, it demonstrates excellent mobility even when it is being used on inclined sites. Large Digging Force With the addition of one-touch Power Max. function, digging force has been further increased. (8.5 seconds of operation) Maximum arm crowd force (SAE): 222 kn (24.9t) 238 kn (26.8t) (with Power Max.) Maximum bucket digging force ( SAE): 264 kn (29.7t) 285 kn (32.1t) (with Power Max.) 7% UP 8% UP Lifting Mode When lifting mode is selected, lifting capacity increases 17% by raising hydraulic pressure. The work equipment and swing speeds are lowered at the same time to provide additional control. Two-Mode Setting for oom Smooth mode provides easy operation for gathering blasted rock and scraping operations. When maximum digging force is needed, switch to power mode for more effective excavating. Smooth mode oom raised Power mode Working Mode Selection Hydraulics Unique two-pump system assures smooth compound movement of the work equipment. OLSS (Open Center Load Sensing System) controls all pumps for efficient engine power use. This system also reduces hydraulic loss during operation. Multi-Function Color Monitor Power and Economy Mode The PC600LC-8 excavator is equipped with three working modes. Each mode is designed to match engine speed, pump flow, and system pressure to the current application, giving the operator flexibility to match equipment performance to the job at hand. Working Mode Application Advantage P Power Maximum production/power Mode Fast cycle time E Economy Good cycle time (E0,E1,E2,E3) Mode Good fuel economy L Lifting Hydraulic pressure is Mode increased 17%. Power Mode Economy Mode Lifting Mode 5

6 PC600LC-8 H YDRAULIC E XCAVATOR RELIAILITY FEATURES Excellent Reliability and Durability Strengthened oom and Arm Thanks to large cross-sectional structure, thick high tensile strength steel plate, and partition walls, the boom and arm exhibit excellent durability and are highly resistant to bending and torsional stress. High-Pressure In-line Filtration The PC600LC-8 has the most extensive filtration system available, providing in-line filters as standard equipment. An in-line filter in the outlet port of each main hydraulic pump reduces failures caused by contamination. Sturdy Undercarriage The undercarriage is strengthened to provide excellent reliability and durability when working on rocky ground or blasted rock. Partition wall Wide width arm Large cross-sectional structure boom O-Ring Face Seal The hydraulic hose seal method has been changed from a conventional taper seal to an O-ring seal. This provides improved sealing performance during operation. Frame Structure The revolving frame and center frame swing circle mounts are one-piece nonwelded structures so that force is transmitted directly through the thick plate without passing through any welded joints. Fuel Pre-Filter (with Water Separator) Removes water and contaminants from the fuel to enhance fuel system reliability. In-line filter Metal Guard Rings Metal guard rings protect all the hydraulic cylinders and improve reliability. Heat-Resistant Wiring Heat-resistant wiring is utilized for the engine electric circuit and other major component circuits. Circuit reaker With circuit breaker, the machine can be easily restarted after repair. Sturdy guards shield the travel motors and piping from rock damage. Track roller guard (full length) (optional) Strengthened Revolving Frame Underguard Guards the machine body against rock damage and prevents hydraulic components and the engine from damage. DT-Type Connectors DT-type connectors seal tight and have higher reliability. 6 Fuel pre-filter

7 H YDRAULIC E XCAVATOR PC600LC-8 WORKING ENVIRONMENT The cab interior is spacious and provides a comfortable working environment Large Comfortable Cab Comfortable Cab The new PC600LC-8 cab offers an exceptionally comfortable operating environment. The large cab enables full flat reclining of the seat back with headrest. Pressurized Cab The automatic air conditioner, air filters and a higher internal air pressure (6.0 mm Aq 0.2" in Aq) prevent external dust from entering the cab. Low Noise Design Noise level is remarkably reduced, not only engine noise but also swing and hydraulic relief noise. Low Vibration with Cab Damper Mounting The PC600LC-8 uses an improved cab damper mount system that incorporates longer stroke and the addition of a spring. The new cab damper mounting, combined with a strengthened left and right side deck, aids vibration reduction at the operator s seat. Vibration at floor is reduced from 120 d (VL) to 115 d (VL). d (VL) is index for expressing size of vibration. Rubber Spring Photo may include optional equipment. Automatic Air Conditioner A 6,900 kcal tu automatic air conditioner is utilized. The bi-level control function keeps the operator's head and feet cool and warm respectively. This improved air flow function keeps the inside of the cab comfortable throughout the year. Silicon Oil Comparison of Riding Comfort Cab Damper Mounting Multi-Layer Viscous Mount Vertical direction on graph shows size of vibration. Conditions: Traveling over obstacle one side track Traveling speed forward high Floor Vibration Skylight Sliding Window The PC600LC-8 s cab floormat is easy to keep clean. The gently inclined surface has a flanged floormat and drainage holes to facilitate runoff. Washable Cab Floormat 7

8 PC600LC-8 H YDRAULIC E XCAVATOR SAFETY FEATURES Safety Features Cab Cab top guard level 2 (ISO 10262) capable, with optional bolt-on top guard. Wide Visibility The right side window pillar has been removed and the rear pillar reshaped to provide better visibility. lind spots have been decreased by 34%. Pump/Engine room partition prevents oil from spraying on the engine if a hydraulic hose should burst. Thermal and fan guards are placed around high-temperature parts of the engine and fan drive. Seat with headrest reclined full flat Multi-Position Controls The multi-position, PPC (proportional pressure control) levers allow the operator to work in comfort while maintaining precise control. A double-slide mechanism allows the seat and control levers to move together or independently, allowing the operator to position the controls for maximum productivity and comfort. Photo may include optional equipment. Serrated steps and large handrail Serrated steps provide anti-slip footing for added safety. Large Handrail and Wide Catwalk Seat Sliding Amount: 340 mm 13.4" Slip-Resistant Plates 8 Defroster Cab Frame Mounted Wiper ottle Holder and Magazine Rack Thermal Guards

9 H YDRAULIC E XCAVATOR PC600LC-8 EASY MAINTENANCE FEATURES Komatsu Designed the PC600LC-8 for Easy Service Access Easy Checking and Maintenance of Engine Engine check points are concentrated on one side of the engine to facilitate daily checks. Thermal guards are placed around high-temperature parts such as turbocharger. Wide Catwalk and Large Handrails Easier, safer operator cab access and maintenance checks. Access Steps Steps allows access from left hand catwalk to top of machine for engine check and maintenance. One-Touch Drain Cock Easier, cleaner engine oil changes. Reduced Maintenance Costs Hydraulic oil filter replacement is extended from 500 to 1000 hours. Engine oil and filter replacement intervals are extended from 250 to 500 hours. Electric Operated Grease Gun Equipped with Hose Reel Greasing is made easy with the electric operated grease gun and indicator. Slip-Resistant Plates are provided for improved foot traction. Easy Cleaning of Radiator The hydraulic driven fan can be reversed to facilitate cleaning of the cooling unit. In addition, this feature can reduce warm-up time in low temperatures. Dust Indicator with 5-Step Indication Informs of air cleaner clogging in 5 steps to warn of filter condition. Easy Serviced Radiator Engine hood opens fully to facilitate removal and installation of the radiator. The hood can be opened vertically by changing the position of the torsion bar. Indicator Grease gun 9

10 PC600LC-8 H YDRAULIC E XCAVATOR RELIAILITY AND FEATURES High-Quality EMMS Self-diagnostic System Abnormality Checking Function In case of machine malfunction, the EMMS monitoring system checks hydraulic pressure, solenoid ON/OFF status, temperatures, engine condition, electrical systems, etc., and provides operator warning and advice. Maintenance History Memory Function Maintenance records such as replacement of engine oil, hydraulic oil, filters, etc. can be stored. Trouble Data Memory Function Trouble data are stored to serve as references for future checking and troubleshooting. Maintenance display of the EMMS multi-color monitor (Example) Normal display Maintenance time display Engine oil replacement display Abnormal information & checking function display of the EMMS multicolor monitor (Example) attery charging abnormal display Error code display Display for night work Photo may include optional equipment. 10

11 SPECIFICATIONS H YDRAULIC E XCAVATOR PC600LC-8 ENGINE Model Komatsu SAA6D140E-5 Type Water-cooled, 4-cycle, direct injection Aspiration Turbocharged, aftercooled, cooled EGR Number of cylinders ore mm 5.51" Stroke mm 6.50" Piston displacement ltr 930 in 3 Governor All-speed, electronic Horsepower: SAE J Gross 323 kw 433 HP ISO 9249 / SAE J Net 320 kw 429 HP Hydraulic fan at maximum speed Net 288 kw 386 HP Rated rpm rpm Fan drive type Hydraulic EPA Tier 3 and EU stage 3A emission certified. HYDRAULIC SYSTEM Type Open-center load-sensing system Number of selectable working modes Main pump: Type Variable-capacity piston pumps Pumps for oom, arm, bucket, swing, and travel circuits Maximum flow: Main x 410 ltr/min 2 x 108 U.S. gal/min Sub-pump for control circuit Gear pump Hydraulic motors: Travel x axial piston motors with parking brake Swing x axial piston motors with swing holding brake Relief valve setting: Implement circuits MPa 325 kgf/cm 2 4,620 psi Travel circuit MPa 350 kgf/cm 2 4,980 psi Swing circuit MPa 260 kgf/cm 2 3,700 psi Pilot circuit MPa 30 kgf/cm psi Hydraulic cylinders: Number of cylinders bore x stroke oom mm x 1725 mm 7.3" x 67.9" Arm mm x 2045 mm 7.9" x 80.5" ucket mm x 1425 mm 7.3" x 56.1" for 2.9m 9'6" Arm mm x 1610 mm 7.3" x 63.4" DRIVES AND RAKES Steering control Two levers with pedals Drive method Fully hydrostatic Travel motor Axial piston motor, in-shoe design Reduction system Planetary triple reduction Maximum drawbar pull kn kg 93,250 lb Gradeability % Maximum travel speed Low km/h 1.9 mph High km/h 3.0 mph Service brake Hydraulic lock Parking brake Oil disc brake SWING SYSTEM Driven method Hydraulic motors (2) Swing reduction Planetary gear Swing circle lubrication Grease-bathed Swing lock Oil disc brake Swing speed rpm Swing torque kg m 154,481 ft. lbs. UNDERCARRIAGE Center frame H-leg frame Track frame ox-section Track type Sealed Track adjuster Hydraulic No. of shoes each side No. of carrier rollers each side No. of track rollers each side COOLANT AND LURICANT CAPACITY (REFILLING) Fuel tank ltr U.S. gal Radiator ltr 15.3 U.S. gal Engine ltr 10.6 U.S. gal Final drive, each side ltr 2.6 U.S. gal Swing drive x 13 ltr 2 x 3.4 U.S. gal Hydraulic tank ltr 95.0 U.S. gal OPERATING WEIGHT (APPROXIMATE) AND WORKING FORCES Operating weight, including 7660 mm 25'2" boom, 3500 mm 11'6" arm, SAE heaped 2.7 m yd 3 backhoe bucket, operator, lubricant, coolant, full fuel tank, and the standard equipment. Shoes Operating Weight Ground Pressure 600 mm 24" Triple grouser 750 mm 29.5" Triple grouser 900 mm 35.5" Triple grouser kg 128,530 lb kg 130,290 lb kg 132,280 lb 96.1 kpa 0.98 kgf/cm psi 78.0 kpa 0.80 kgf/cm psi 65.9 kpa 0.67 kgf/cm psi oom mm/ft in '2" '2" '2" '11" '8" Arm mm/ft in '6" '1" '1" '6" '6" ucket digging force kgf kgf (SAE) 59,300 lb 65,040 lb ucket digging force kgf kgf at power max. (SAE) 64,150 lbf 70,040 lb Arm crowd force kgf kgf kgf kgf kgf (SAE) 49,820 lb 43,650 lb 38,140 lb 49,820 lb 58,420 lb Arm crowd force kgf kgf kgf kgf kgf at power max. (SAE) 53,570 lb 46,960 lb 41,010 lb 53,570 lb 62,830 lb ucket digging force kgf kgf (ISO) 66,140 lb 75,620 lb ucket digging force kgf kgf at power max. (ISO) 71,210 lb 81,350 lb Arm crowd force kgf kgf kgf kgf kgf (ISO) 51,370 lb 45,410 lb 39,460 lb 51,370 lb 61,070 lb Arm crowd force kgf kgf kgf kgf kgf at power max. (ISO) 55,340 lb 48,940 lb 42,550 lb 55,340 lb 65,920 lb 11

12 PC600LC-8 H YDRAULIC E XCAVATOR DIMENSIONS oom 7660 mm 25'2" 7660 mm 25'2" 7660 mm 25'2" 7300 mm 23'11" 6600 mm 21'8" Arm 3500 mm 11'6" 4300 mm 14'1" 5200 mm 17'1" 3500 mm 11'6" 2900 mm 9'6" A Overall length mm 42'4" mm 42'1" mm 41'2" mm 41'2" mm 39'2" Overall height (to top of boom) 4300 mm 14'1" 4655 mm 15'3" 5235 mm 17'2" 4280 mm 14'1" 4600 mm 15'1" C Overall width 4200 mm 13'10" D Overall height (to top of cab) 3280 mm 10'9" E Ground clearance, counterweight 1365 mm 4'6" F Ground clearance (minimum) 780 mm 2'7" G Tail swing radius 3900 mm 12'10" H Track length on ground 4600 mm 15'1" I Track length 5690 mm 18'8" J Track gauge 2590 mm 8'6" K Track gauge when expanded 3300 mm 10'10" L Width of crawler 3490 mm 11'6" M Width of crawler when expanded 4200 mm 13'10" N Shoe width 900 mm 35.5" O Grouser height 37 mm 1.5" P Machine cab height 3435 mm 11'3" Q Machine cab width 3195 mm 10'6" R Distance, swing center to rear end 3775 mm 12'5" A H I G,R E P O D N F Q J,K C,L,M ACKHOE UCKET, ARM, AND OOM COMINATION ucket oom 7660 mm 25'2" Arms SE oom ucket 3.5 m 4.3 m 5.2 m 2.9 m Type Capacity OLW Weight 11'6" 14'1" 17'1" 9'6" 1.57 m yd mm 36" 2230 kg 4,916 lb V V V V 1.93 m yd mm 42" 2395 kg 5,280 lb V V X V 2.29 m yd mm 48" 2631 kg 5,800 lb V W Y V HP 2.67 m yd mm 54" 2797 kg 6,167 lb W X Z V 3.04 m yd mm 60" 3034 kg 6,688 lb X Y Z V 3.42 m yd mm 66" 3197 kg 7,048 lb Y Z Z W 3.81 m yd mm 72" 3433 kg 7,568 lb Y Z Z X 1.57 m yd mm 36" 2532 kg 5,582 lb V V W V 1.93 m yd mm 42" 2724 kg 6,006 lb V V X V 2.29 m yd mm 48" 2987 kg 6,586 lb V W Z V HPX 2.67 m yd mm 54" 3181 kg 7,013 lb W Y Z V 3.04 m yd mm 60" 3445 kg 7,594 lb X Y Z V 3.42 m yd mm 66" 3635 kg 8,014 lb Y Z Z W 3.81 m yd mm 72" 3898 kg 8,594 lb Z Z Z X V Used with weights up to 3,500 lb/yd 3, W Used with weights up to 3,000 lb/yd 3 X Used with weights up to 2,500 lb/yd 3, Y Used with weights up to 2,000 lb/yd 3, Z Not useable 12

13 H YDRAULIC E XCAVATOR PC600LC-8 WORKING RANGE 13 H A C E D ' G F oom '2" '2" '2" '11" '8" Arm '6" '1" '1" '6" '6" A Max. digging height '0" '0" '3" '8" '7" Max. dumping height '1" '1" '3" '1" '8" C Max. digging depth '10" '5" '7" '9" '2" D E Max. vertical wall digging depth '8" '6" '5" '10" '6" Max. digging depth of cut for 8' level '5" '1" '3" '4" '8" F Max. digging reach '9" '1" '0" '5" '11" G Unit: mm ft in Max. digging reach at ground level '0" '6" '4" '8" '1" H Min. swing radius '7" '8" '1" '8" '4" 13

14 PC600LC-8 H YDRAULIC E XCAVATOR LIFTING CAPACITIES LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: Arm length: 3500 mm 11'6" oom length 7660 mm 25'2" ucket 2.7 m yd 3 (SAE heaped) ucket weight: 2430 kg 5,356 lb. Lifting mode: On C PC600LC-8 Shoe 600 mm 24" Unit: kg/lb 9.1 m 8.9 m *8600 * ' 29' *18,900 *18, m 9.9 m *8350 * ' 32' *18,400 *18, m 10.5 m *13650 *13650 * *8450 * ' 35' *30,100 *30,100 *26,100 25,500 *18,600 *18, m 11.0 m *24900 *24900 *18600 *18600 * * * ' 36' *55,000 *55,000 *41,000 *41,000 *33,600 33,000 *27,200 25,000 *19,300 17, m 11.2 m * * * * ' 37' *47,000 43,800 *37,200 31,300 *29,100 24,200 *20,500 16, m 11.2 m *16900 *16900 * * * * ' 37' *37,300 *37,300 *52,300 41,800 *40,200 29,800 *31,200 23,200 *22,400 15,900 0 m 10.9 m *19800 *19800 * * ' 36' *43,700 *43,700 *54,500 40,300 *41,800 28,500 32,300 22,300 23,700 16, m 10.5 m *14800 *14800 *26600 *26600 * ' 34' *32,700 *32,700 *58,600 *58,600 *54,100 39,700 40,900 27,600 31,600 21,700 25,300 17, m 9.8 m *23250 *23250 * * * ' 32' *51,300 *51,300 *66,400 64,600 *51,200 39,800 *40,000 27,800 31,200 21,300 28,300 19, m 8.7 m *33350 *33350 *26200 *26200 *20550 *18350 * * ' 29' *73,600 *73,600 *57,800 *57,800 *45,300 *40,500 *35,400 28,600 31,200 21,300 *28,700 23, m 7.2 m *20050 *20050 *15350 *15350 *12350 * ' 24' *44,200 *44,200 *33,900 *33,900 *27,300 *27,300 PC600LC-8 Shoe 750 mm 29.5" Unit: kg/lb 9.1 m 8.9 m *8600 * ' 29' *18,900 *18, m 9.9 m * *8350 * ' 32' *26,100 25,900 *18,400 *18, m 10.5 m *13650 *13650 * *8450 * ' 35' *30,100 *30,100 *27,200 25,400 *18,600 *18, m 11.0 m *24900 *24900 *18600 *18600 * * * ' 36' *55,000 *55,000 *41,000 *41,000 *33,600 33,500 *29,100 24,500 *19,300 17, m 11.2 m * * * * ' 37' *47,000 44,400 *37,200 31,700 *31,200 23,600 *20,500 16, m 11.2 m *16900 *16900 * * * ' 37' *37,300 *37,300 *52,300 42,400 *40,200 30,200 32,800 22,700 *22,400 16,200 0 m 10.9 m *19800 *19800 * * ' 36' *43,700 *43,700 *54,500 40,900 *41,800 28,900 32,100 22,000 24,100 16, m 10.5 m *14800 *14800 *26600 *26600 * ' 34' *32,700 *32,700 *58,600 *58,600 *54,100 40,300 41,600 28,100 31,700 21,700 25,700 17, m 9.8 m *23250 *23250 * * * * ' 32' *51,300 *51,300 *66,400 65,500 *51,200 40,400 *40,000 28,200 31,700 21,700 *28,600 19, m 8.7 m *33350 *33350 *26200 *26200 * * * ' 29' *73,600 *73,600 *57,800 *57,800 *45,300 41,100 *35,400 29,100 *28,700 23, m 7.2 m *20050 *20050 *15350 *15350 *12350 * ' 24' *44,200 *44,200 *33,900 *33,900 *27,300 *27,300 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 14

15 H YDRAULIC E XCAVATOR PC600LC-8 LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: Arm length: 3500 mm 11'6" oom length 7660 mm 25'2" ucket 2.7 m yd 3 (SAE heaped) ucket weight: 2430 kg 5,356 lb. Lifting mode: On C PC600LC-8 Shoe 900 mm 35.5" Unit: kg/lb 9.1 m 8.9 m *8600 * ' 29' *18,900 *18, m 9.9 m *11800 *11800 *8350 * ' 32' *26,100 *26,100 *18,400 *18, m 10.5 m *13650 *13650 * *8450 * ' 35' *30,100 *30,100 *27,200 25,700 *18,600 *18, m 11.0 m *24900 *24900 *18600 *18600 *15200 *15200 * * ' 36' *55,000 *55,000 *41,000 *41,000 *33,600 *33,600 *29,100 24,900 *19,300 17, m 11.2 m * * * * ' 37' *47,000 45,000 *37,200 32,200 *31,200 23,900 *20,500 16, m 11.2 m *16900 *16900 * * * * ' 37' *37,300 *37,300 *52,300 43,000 *40,200 30,700 *33,000 23,000 *22,400 16,500 0 m 10.9 m *19800 *19800 * * ' 36' *43,700 *43,700 *54,500 41,500 *41,800 29,300 32,600 22,400 24,500 16, m 10.5 m *14800 *14800 *26600 *26600 * * ' 34' *32,700 *32,700 *58,600 *58,600 *54,100 40,900 *41,700 28,500 32,200 22,000 26,100 17, m 9.8 m *23250 *23250 * * * * * ' 32' *51,300 *51,300 *66,400 66,400 *51,200 41,000 *40,000 28,700 *31,900 22,000 *28,600 20, m 8.7 m *33350 *33350 *26200 *26200 * * * ' 29' *73,600 *73,600 *57,800 *57,800 *45,300 41,700 *35,400 29,500 *28,700 24, m 7.2 m *20050 *20050 *15350 *15350 *12350 * ' 24' *44,200 *44,200 *33,900 *33,900 *27,300 *27,300 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 15

16 PC600LC-8 H YDRAULIC E XCAVATOR LIFTING CAPACITIES LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: Arm length: 4300 mm 14'1" oom length 7660 mm 25'2" ucket 2.3 m yd 3 (SAE heaped) ucket weight: 2263 kg 4,988 lb. Lifting mode: On C PC600LC-8 Shoe 600 mm 24" Unit: kg/lb 9.1 m 9.8 m *9000 *9000 *6600 * ' 32' *19,800 *19,800 *14,500 *14, m 10.7 m *10600 *10600 *6400 * ' 35' *23,300 *23,300 *14,100 *14, m 11.3 m *11200 *11200 *6450 * ' 37' *24,700 *24,700 *14,200 *14, m 11.7 m *13850 *13850 * *6650 * ' 38' *30,600 *30,600 *26,800 24,500 *14,600 *14, m 11.9 m *27750 *27750 *19750 *19750 * * * ' 39' *61,200 *61,200 *43,500 *43,500 *34,500 31,700 *29,200 23,400 *15,500 14, m 11.9 m *23700 *23700 * * * * ' 39' *52,200 *52,200 *49,300 42,300 *38,100 29,900 *31,400 22,300 *16,800 14,000 0 m 11.7 m *21700 *21700 * * * ' 38' *47,800 *47,800 *52,800 40,200 *40,600 28,600 31,400 21,400 *18,700 14, m 11.3 m *13850 *13850 *25450 *25450 * * ' 37' *30,600 *30,600 *56,100 *56,100 *53,800 39,200 40,800 27,500 30,800 20,900 *21,600 14, m 10.6 m *20200 *20200 * * ' 35' *44,500 *44,500 *69,700 63,100 *52,300 38,900 40,500 27,100 30,600 20,700 24,300 16, m 9.7 m *27900 *27900 *28550 *28550 * * * * ' 32' *61,500 *61,500 *62,900 *62,900 *48,100 39,300 *37,700 27,600 *29,400 21,000 *26,500 19, m 8.3 m *31250 *31250 *23550 *23550 *18250 *18250 * * ' 27' *69,000 *69,000 *62,000 *52,000 *40,200 *40,200 *30,700 28,500 *26,200 25,000 PC600LC-8 Shoe 750 mm 29.5" Unit: kg/lb 9.1 m 9.8 m *9000 *9000 *6600 * ' 32' *19,800 *19,800 *14,500 *14, m 10.7 m *10600 *10600 *6400 * ' 35' *23,300 *23,300 *14,100 *14, m 11.3 m *11200 *11200 *6450 * ' 37' *24,700 *24,700 *14,200 *14, m 11.7 m *13850 *13850 * *6650 * ' 38' *30,600 *30,600 *26,800 24,800 *14,600 *14, m 11.9 m *27750 *27750 *19750 *19750 * * * ' 39' *61,200 *61,200 *43,500 *43,500 *34,500 32,100 *29,200 23,700 *15,500 14, m 11.9 m *23700 *23700 * * * * ' 39' *52,200 *52,200 *49,300 42,900 *38,100 30,400 *31,400 22,700 *16,800 14,200 0 m 11.7 m *21700 *21700 * * * ' 38' *47,800 *47,800 *52,800 40,800 *40,600 29,000 31,900 21,800 *18,700 14, m 11.3 m *13850 *13850 *25450 *25450 * * * ' 37' *30,600 *30,600 *56,100 *56,100 *53,800 39,800 *41,400 27,900 31,300 21,200 *21,600 15, m 10.6 m *20200 *20200 * * * ' 35' *44,500 *44,500 *69,700 64,000 *52,300 39,500 *40,500 27,600 31,100 21,000 24,700 16, m 9.7 m *27900 *27900 *28550 *28550 * * * * ' 32' *61,500 *61,500 *62,900 *62,900 *48,100 39,900 *37,700 28,100 *29,400 21,300 *26,500 19, m 8.3 m *31250 *31250 *23550 *23550 *18250 *18250 * * ' 27' *69,000 *69,000 *62,000 *52,000 *40,200 *40,200 *30,700 28,900 *26,200 25,400 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 16

17 H YDRAULIC E XCAVATOR PC600LC-8 LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: Arm length: 4300 mm 14'1" oom length 7660 mm 25'2" ucket 2.3 m yd 3 (SAE heaped) ucket weight: 2263 kg 4,988 lb. Lifting mode: On C PC600LC-8 Shoe 900 mm 35.5" Unit: kg/lb 9.1 m 9.8 m *9000 *9000 *6600 * ' 32' *19,800 *19,800 *14,500 *14, m 10.7 m *10600 *10600 *6400 * ' 35' *23,300 *23,300 *14,100 *14, m 11.3 m *11200 *11200 *6450 * ' 37' *24,700 *24,700 *14,200 *14, m 11.7 m *13850 *13850 * *6650 * ' 38' *30,600 *30,600 *26,800 25,200 *14,600 *14, m 11.9 m *27750 *27750 *19750 *19750 * * * ' 39' *61,200 *61,200 *43,500 *43,500 *34,500 32,600 *29,200 24,100 *15,500 14, m 11.9 m *23700 *23700 * * * * ' 39' *52,200 *52,200 *49,300 43,500 *38,100 30,800 *31,400 23,000 *16,800 14,500 0 m 11.7 m *21700 *21700 * * * ' 38' *47,800 *47,800 *52,800 41,400 *40,600 29,400 32,400 22,100 *18,700 14, m 11.3 m *13850 *13850 *25450 *25450 * * * ' 37' *30,600 *30,600 *56,100 *56,100 *53,800 40,400 *41,400 28,400 31,800 21,600 *21,600 15, m 10.6 m *20200 *20200 * * * ' 35' *44,500 *44,500 *69,700 64,900 *52,300 40,100 *40,500 28,000 31,600 21,400 25,200 17, m 9.7 m *27900 *27900 *28550 *28550 * * * * ' 32' *61,500 *61,500 *62,900 *62,900 *48,100 40,500 *37,700 28,500 *29,400 21,700 *26,500 20, m 8.3 m *31250 *31250 *23550 *23550 *18250 *18250 * * ' 27' *69,000 *69,000 *52,000 *52,000 *40,200 *40,200 *30,700 29,400 *26,200 25,800 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 17

18 PC600LC-8 H YDRAULIC E XCAVATOR LIFTING CAPACITIES LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: Arm length: 5200 mm 17'1" oom length 7660 mm 25'2" ucket 2.0 m yd 3 (SAE heaped) ucket weight: 2133 kg 4,700 lb. Lifting mode: On C PC600LC-8 Shoe 600 mm 24" Unit: kg/lb 9.1 m 10.9 m *4900 * ' 36' *10,800 *10, m 11.7 m *4750 * ' 38' *10,500 *10, m 12.3 m *4800 * ' 40' *10,600 *10, m 12.6 m *11000 *11000 *4900 * ' 41' *24,300 *24,300 *10,800 *10, m 12.8 m *23850 *23850 *17550 *17550 *14250 *14250 * *5150 * ' 42' *52,600 *52,600 *38,700 *38,700 *31,400 *31,400 *26,900 23,900 *11,400 *11, m 12.8 m *29400 *29400 * * * * ' 42' *64,800 *64,800 *45,600 43,700 *35,500 30,600 *29,500 22,700 *12,300 12,300 0 m 12.6 m *25000 *25000 * * * ' 41' *55,100 *55,100 *50,500 41,000 *38,800 29,000 31,600 21,600 *13,600 12, m 12.2 m *13000 *13000 *25150 *25150 * * * ' 40' *28,700 *28,700 *55,500 *55,500 *53,000 39,400 *40,800 27,800 30,700 20,900 *15,500 12, m 11.6 m *17700 *17700 * * * ' 38' *39,000 *39,000 *64,700 62,400 *53,100 38,600 40,300 27,000 30,300 20,400 *18,300 13, m 10.7 m *23500 *23500 * * * * ' 35' *51,800 *51,800 *67,800 62,800 *50,700 38,600 *39,500 27,100 30,200 20,400 *22,900 15, m 9.6 m *31000 *31000 *27050 *27050 * * * * ' 31' *68,400 *68,400 *59,600 *59,600 *45,300 39,200 *35,200 27,500 *26,900 20,900 *24,500 19,600 PC600LC-8 Shoe 750 mm 29.5" Unit: kg/lb 9.1 m 10.9 m *4900 * ' 36' *10,800 *10, m 11.7 m *4750 * ' 38' *10,500 *10, m 12.3 m *4800 * ' 40' *10,600 *10, m 12.6 m *11000 *11000 *4900 * ' 41' *24,300 *24,300 *10,800 *10, m 12.8 m *23850 *23850 *17550 *17550 *14250 *14250 * *5150 * ' 42' *52,600 *52,600 *38,700 *38,700 *31,400 *31,400 *26,900 24,300 *11,400 *11, m 12.8 m *29400 *29400 * * * *5550 *5550 5' 42' *64,800 *64,800 *45,600 44,300 *35,500 31,100 *29,500 23,100 *12,300 *12,300 0 m 12.6 m *25000 *25000 * * * * ' 41' *55,100 *55,100 *50,500 41,600 *38,800 29,400 *31,600 22,000 *13,600 12, m 12.2 m *13000 *13000 *25150 *25150 * * * ' 40' *28,700 *28,700 *55,500 *55,500 *53,000 40,000 *40,800 28,300 31,300 21,200 *15,500 13, m 11.6 m *17700 *17700 * * * * ' 38' *39,000 *39,000 *64,700 63,400 *53,100 39,200 *40,900 27,400 30,800 20,800 *18,300 14, m 10.7 m *23500 *23500 * * * * ' 35' *51,800 *51,800 *67,800 63,700 *50,700 39,200 *39,500 27,500 30,700 20,700 *22,900 16, m 9.6 m *31000 *31000 *27050 *27050 * * * * ' 31' *68,400 *68,400 *59,600 *59,600 *45,300 39,800 *35,200 28,000 *26,900 21,200 *24,500 19,900 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J/ISO Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 18

19 H YDRAULIC E XCAVATOR PC600LC-8 LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: Arm length: 5200 mm 17'1" oom length 7660 mm 25'2" ucket 2.0 m yd 3 (SAE heaped) ucket weight: 2133 kg 4,700 lb. Lifting mode: On C PC600LC-8 Shoe 900 mm 35.5" Unit: kg/lb 9.1 m 10.9 m *4900 * ' 36' *10,800 *10, m 11.7 m *4750 * ' 38' *10,500 *10, m 12.3 m *4800 * ' 40' *10,600 *10, m 12.6 m *11000 *11000 *4900 * ' 41' *24,300 *24,300 *10,800 *10, m 12.8 m *23850 *23850 *17550 *17550 *14250 *14250 * *5150 * ' 42' *52,600 *52,600 *38,700 *38,700 *31,400 *31,400 *26,900 24,600 *11,400 *11, m 12.8 m *29400 *29400 * * * *5550 *5550 5' 42' *64,800 *64,800 *45,600 44,900 *35,500 31,500 *29,500 23,400 *12,300 *12,300 0 m 12.6 m *25000 *25000 * * * * ' 41' *55,100 *55,100 *50,500 42,200 *38,800 29,900 *31,600 22,300 *13,600 12, m 12.2 m *13000 *13000 *25150 *25150 * * * ' 40' *28,700 *28,700 *55,500 *55,500 *53,000 40,600 *40,800 28,700 31,800 21,600 *15,500 13, m 11.6 m *17700 *17700 * * * * ' 38' *39,000 *39,000 *64,700 64,300 *53,100 39,800 *40,900 27,900 31,300 21,100 *18,300 14, m 10.7 m *23500 *23500 * * * * ' 35' *51,800 *51,800 *67,800 64,700 *50,700 39,800 *39,500 28,000 31,200 21,100 *22,900 16, m 9.6 m *31000 *31000 *27050 *27050 * * * * ' 31' *68,400 *68,400 *59,600 *59,600 *45,300 40,400 *35,200 28,400 *26,900 21,600 *24,500 20,200 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 19

20 PC600LC-8 H YDRAULIC E XCAVATOR LIFTING CAPACITIES LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: HD Arm length: 3500 mm 11'6" HD oom length 7300 mm 23'11" ucket 2.8 m yd 3 (SAE heaped) ucket weight: 3096 kg 6,824 lb. Lifting mode: On C PC600LC-8 Shoe 600 mm 24" Unit: kg/lb 9.1 m 8.3 m *8150 * ' 27' *18,000 *18, m 9.4 m *9600 *9600 *7900 * ' 31' *21,100 *21,100 *17,400 *17, m 10.1 m *13450 *13450 * *7950 * ' 33' *29,600 *29,600 *27,000 24,200 *17,600 *17, m 10.6 m *18050 *18050 * * * ' 35' *39,800 *39,800 *32,900 32,600 *28,700 23,500 *18,300 17, m 10.8 m *29850 *29850 * * * *8900 * ' 35' *65,800 *65,800 *46,300 20,200 *36,600 30,900 *30,800 22,600 *19,600 *16, m 10.7 m *24800 *24800 * * * ' 35' *54,700 *54,700 *51,400 41,900 *39,600 29,400 31,700 21,800 *21,700 16,300 0 m 10.5 m *25500 *25500 * * ' 34' *56,200 *56,200 *53,900 40,200 *41,500 28,300 31,000 21,100 24,600 16, m 10.0 m *17350 *17350 *32050 *29000 * ' 33' *38,300 *38,300 *70,700 *63,900 *53,700 39,500 41,100 27,700 30,700 20,800 26,400 17, m 9.3 m *26200 *26200 * * * * * ' 30' *57,800 *57,800 *66,500 64,500 *50,500 39,600 *39,300 27,700 *30,300 20,900 *29,400 20, m 8.2 m *33900 *33900 * * * * ' 27' *74,700 *74,700 *56,800 56,800 *43,900 40,300 *33,400 28,300 *29,400 25, m 6.6 m *18600 *18600 *14000 *14000 *12400 * ' 22' *41,000 *41,000 *30,800 *30,800 *27,400 *27,400 PC600LC-8 Shoe 750 mm 29.5" Unit: kg/lb 9.1 m 8.3 m *8150 * ' 27' *18,000 *18, m 9.4 m *9600 *9600 *7900 * ' 31' *21,100 *21,100 *17,400 *17, m 10.1 m *13450 *13450 * *7950 * ' 33' *29,600 *29,600 *27,000 24,500 *17,600 *17, m 10.6 m *18050 *18050 * * * ' 35' *39,800 *39,800 *32,900 32,900 *28,700 23,800 *18,300 18, m 10.8 m *29850 *29850 * * * * ' 35' *65,800 *65,800 *46,300 45,100 *36,600 31,400 *30,800 23,000 *19,600 16, m 10.7 m *24800 *24800 * * * ' 35' *54,700 *54,700 *51,400 42,500 *39,600 29,900 32,200 22,100 *21,700 16,600 0 m 10.5 m *25500 *25500 * * * ' 34' *56,200 *56,200 *53,900 40,800 *41,500 28,800 31,500 21,500 *24,800 16, m 10.0 m *17350 *17350 * * * ' 33' *38,300 *38,300 *70,700 64,800 *53,700 40,100 *41,400 28,100 31,200 21,100 26,900 18, m 9.3 m *26200 *26200 * * * * * ' 30' *57,800 *57,800 *66,500 65,500 *50,500 40,200 *39,300 28,200 *30,300 21,300 *29,400 20, m 8.2 m *33900 *33900 *25800 *25800 * * * ' 27' *74,700 *74,700 *56,800 *56,800 *43,900 40,900 *33,400 28,800 *29,400 25, m 6.6 m *18600 *18600 *14000 *14000 *12400 * ' 22' *41,000 *41,000 *30,800 *30,800 *27,400 *27,400 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J/ISO Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 20

21 H YDRAULIC E XCAVATOR PC600LC-8 LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: HD Arm length: 3500 mm 11'6" HD oom length 7300 mm 23'11" ucket 2.8 m yd 3 (SAE heaped) ucket weight: 3096 kg 6,824 lb. Lifting mode: On C PC600LC-8 Shoe 900 mm 35.5" Unit: kg/lb 9.1 m 8.3 m *8150 * ' 27' *18,000 *18, m 9.4 m *9600 *9600 *7900 * ' 31' *21,100 *21,100 *17,400 *17, m 10.1 m *13450 *13450 * *7950 * ' 33' *29,600 *29,600 *27,000 24,900 *17,600 *17, m 10.6 m *18050 *18050 *14950 *14950 * * ' 35' *39,800 *39,800 *32,900 *32,900 *28,700 24,200 *18,300 18, m 10.8 m *29850 *29850 * * * * ' 35' *65,800 *65,800 *46,300 45,700 *36,600 31,800 *30,800 23,300 *19,600 17, m 10.7 m *24800 *24800 * * * * ' 35' *54,700 *54,700 *51,400 43,100 *39,600 30,300 *32,500 22,500 *21,700 16,900 0 m 10.5 m *25500 *25500 * * * ' 34' *56,200 *56,200 *53,900 41,400 *41,500 29,200 32,000 21,800 *24,800 17, m 10.0 m *17350 *17350 * * * ' 33' *38,300 *38,300 *70,700 65,800 *53,700 40,700 *41,400 28,600 31,700 21,500 27,300 18, m 9.3 m *26200 *26200 * * * * * ' 30' *57,800 *57,800 *66,500 66,400 *50,500 40,800 *39,300 28,600 *30,300 21,600 *29,400 21, m 8.2 m *33900 *33900 *25800 *25800 * * * ' 27' *74,700 *74,700 *56,800 *56,800 *43,900 41,500 *33,400 29,200 *29,400 26, m 6.6 m *18600 *18600 *14000 *14000 *12400 * ' 22' *41,000 *41,000 *30,800 *30,800 *27,400 *27,400 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 21

22 PC600LC-8 H YDRAULIC E XCAVATOR LIFTING CAPACITIES LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: SE Arm length: 2900 mm 9'6" SE oom length 6600 mm 21'8" ucket 3.5 m yd 3 (SAE heaped) ucket weight: 3278 kg 7,225 lb. Lifting mode: On C PC600LC-8 Shoe 600 mm 24" Unit: kg/lb 9.1 m 6.9 m *11850 * ' 23' *26,100 *26, m 8.2 m *14400 *14400 *11100 * ' 27' *31,800 *31,800 *24,400 *24, m 9.0 m *14950 *14950 *10950 * ' 29' *33,000 *33,000 *24,200 *24, m 9.5 m *24900 *24900 *19200 *19200 * * * ' 31' *54,900 *54,900 *42,300 *42,300 *35,600 32,500 *31,600 23,200 *24,800 21, m 9.7 m *30450 *30450 * * * ' 32' *67,100 *67,100 *48,200 44,900 *38,600 31,100 32,700 22,600 *26,300 20, m 9.7 m * * * * ' 32' *74,400 67,300 *52,200 41,600 *41,200 29,700 31,900 21,900 *28,900 19,700 0 m 9.4 m * * * ' 31' *75,300 65,300 *54,700 40,800 *42,300 28,800 31,400 21,400 29,900 20, m 8.9 m *23150 *23150 * * * * ' 29' *51,000 *51,000 *71,500 65,000 *53,300 40,200 *41,100 28,400 *32,600 22, m 8.1 m *36800 *36800 *28700 *28700 * * * ' 26' *81,100 *81,100 *63,200 *63,200 *46,900 39,200 *36,000 28,700 *32,400 26, m 6.8 m *28300 *28300 *22150 *22150 *16500 *16500 *13800 * ' 22' *62,400 *62,400 *48,800 *48,800 *36,400 *36,400 *30,400 *30,400 PC600LC-8 Shoe 750 mm 29.5" Unit: kg/lb 9.1 m 6.9 m *11850 * ' 23' *26,100 *26, m 8.2 m *14400 *14400 *11100 * ' 27' *31,800 *31,800 *24,400 *24, m 9.0 m *14950 *14950 *10950 * ' 29' *33,000 *33,000 *24,200 *24, m 9.5 m *24900 *24900 *19200 *19200 * * * ' 31' *54,900 *54,900 *42,300 *42,300 *35,600 33,000 *31,600 23,600 *24,800 21, m 9.7 m *30450 *30450 * * * * ' 32' *67,100 *67,100 *48,200 45,500 *38,600 31,500 *32,900 22,900 *26,300 20, m 9.7 m * * * * ' 32' *74,400 68,200 *52,200 42,200 *41,200 30,200 32,400 22,300 *28,900 20,100 0 m 9.4 m * * * ' 31' *75,300 66,200 *54,700 41,400 *42,300 29,200 31,900 21,800 30,400 20, m 8.9 m *23150 *23150 * * * * ' 29' *51,000 *51,000 *71,500 65,900 *53,300 40,800 *41,100 28,800 *32,600 22, m 8.1 m *36800 *36800 *28700 *28700 * * * ' 26' *81,100 *81,100 *63,200 *63,200 *46,900 39,800 *36,000 29,100 *32,400 26, m 6.8 m *28300 *28300 *22150 *22150 *16500 *16500 *13800 * ' 22' *62,400 *62,400 *48,800 *48,800 *36,400 *36,400 *30,400 *30,400 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J/ISO Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 22

23 H YDRAULIC E XCAVATOR PC600LC-8 LIFTING CAPACITY A A: Reach from swing center : ucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side :Rating at maximum reach Conditions: SE Arm length: 2900 mm 9'6" SE oom length 6600 mm 21'8" ucket 3.5 m yd 3 (SAE heaped) ucket weight: 3278 kg 7,225 lb. Lifting mode: On C PC600LC-8 Shoe 900 mm 35.5" Unit: kg/lb 9.1 m 6.9 m *11850 * ' 23' *26,100 *26, m 8.2 m *14400 *14400 *11100 * ' 27' *31,800 *31,800 *24,400 *24, m 9.0 m *14950 *14950 *10950 * ' 29' *33,000 *33,000 *24,200 *24, m 9.5 m *24900 *24900 *19200 *19200 * * * ' 31' *54,900 *54,900 *42,300 *42,300 *35,600 33,400 *31,600 23,900 *24,800 22, m 9.7 m *30450 *30450 * * * * ' 32' *67,100 *67,100 *48,200 46,100 *38,600 32,000 *32,900 23,300 *26,300 20, m 9.7 m * * * * ' 32' *74,400 69,100 *52,200 42,800 *41,200 30,600 32,900 22,600 *28,900 20,400 0 m 9.4 m * * * ' 31' *75,300 67,100 *54,700 42,000 *42,300 29,600 32,400 22,100 30,800 21, m 8.9 m *23150 *23150 * * * * ' 29' *51,000 *51,000 *71,500 66,800 *53,300 41,400 *41,100 29,200 *32,600 23, m 8.1 m *36800 *36800 *28700 *28700 * * * ' 26' *81,100 *81,100 *63,200 *63,200 *46,900 40,400 *36,000 29,500 *32,400 27, m 6.8 m *28300 *28300 *22150 *22150 *16500 *16500 *13800 * ' 22' *62,400 *62,400 *48,800 *48,800 *36,400 *36,400 *30,400 *30,400 *Load is limited by hydraulic capacity rather than tipping. Ratings are based on ISO standard No Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. 23

HYDRAULIC EXCAVATOR PC800LC-8. With Tier 3 Engine

HYDRAULIC EXCAVATOR PC800LC-8. With Tier 3 Engine PC800LC-8 With Tier 3 Engine FLYWHEEL HORSEPOWER 363 kw 487 HP @ 1800 rpm OPERTING WEIGHT 81400 87200 kg 179,400 192,240 lb UCKET CPCITY 1.70-4.53 m 3 2.23-5.93 yd 3 PC 800 LC Photo may include optional

More information

HYDRAULIC EXCAVATOR PC160LC-7. With Tier 3 Engine. FLYWHEEL HORSEPOWER 86 kw rpm OPERATING WEIGHT kg 36,640 37,790 lb

HYDRAULIC EXCAVATOR PC160LC-7. With Tier 3 Engine. FLYWHEEL HORSEPOWER 86 kw rpm OPERATING WEIGHT kg 36,640 37,790 lb FLYWHEEL HORSEPOWER 86 kw 115 HP @ 2200 rpm OPERATING WEIGHT 16620 17140 kg 36,640 37,790 lb PC160LC-7 With Tier 3 Engine BUCKET CAPACITY 0.37 0.95 m 3 0.48 1.24 yd 3 PC 160 LC Photo may include optional

More information

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC

More information

EQUIPMENT OPERATING WEIGHT

EQUIPMENT OPERATING WEIGHT PC300-8 PC300LC-8 FLYWHEEL HORSEPOWER Gross: 194 kw 260 HP @ 1950 rpm Net: 184 kw 246 HP @ 1950 rpm OPERATING WEIGHT PC300-8: 31100 32010 kg 68,560 70,570 lb PC300LC-8: 31600 32580 kg 69,670 71,830 lb

More information

HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN

HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN STANDARD EQUIPMENT Alternator, 0 Ampere, 4V Anti-slip plates Auto-decel Automatic engine warm-up system atteries, 1 Ah/ x 1V oom holding valve ROPS cab (ISO 1117-) Corrosion resistor Counterweight Dry

More information

HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN

HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN STANDARD EQUIPMENT Alternator, 0 Ampere, 4V Anti-slip plates Auto-decel Automatic engine warm-up system atteries, 110 Ah/ x 1V oom holding valve Corrosion resistor Counterweight, 90kg 0,330lb Dry type

More information

FLYWHEEL HORSEPOWER 246 kw rpm. OPERATING WEIGHT PC450-7: kg 94,800 95,720 lb PC450LC-7: kg 97,000 97,990 lb

FLYWHEEL HORSEPOWER 246 kw rpm. OPERATING WEIGHT PC450-7: kg 94,800 95,720 lb PC450LC-7: kg 97,000 97,990 lb FLYWHEEL HORSEPOWER 246 kw 330 HP @ 1850 rpm PC450LC-7 OPERATING WEIGHT : 43000 43420 kg 94,800 95,720 lb PC450LC-7: 44000 44450 kg 97,000 97,990 lb PC 450 WALK-AROUND Harmony with Environment Low emission

More information

HYDRAULIC EXCAVATOR PC130-8

HYDRAULIC EXCAVATOR PC130-8 HORSEPOWER Gross: 72.1 kw 96.6 HP @ 2200 rpm Net: 68.4 kw 91.7 HP @ 2200 rpm OPERATING WEIGHT 12380 12740 kg 27,300 28,100 lb BUCKET CAPACITY 0.18 0.6 m 3 0.24 0.78 yd 3 PC 130 Photo may include optional

More information

FLYWHEEL HORSEPOWER 125 kw rpm OPERATING WEIGHT kg 52,780 55,189 lb BUCKET CAPACITY m

FLYWHEEL HORSEPOWER 125 kw rpm OPERATING WEIGHT kg 52,780 55,189 lb BUCKET CAPACITY m FLYWHEEL HORSEPOWER 125 kw 168 HP @ 2000 rpm OPERATING WEIGHT 23940 25033 kg 52,780 55,189 lb BUCKET CAPACITY 0.48 1.74 m 3 0.63 2.20 yd 3 HYDRAULIC EXCAVATOR Photo may include optional equipment. Series

More information

PC270-8 HYDRAULIC EXCAVATOR CEN

PC270-8 HYDRAULIC EXCAVATOR CEN FLYWHEEL HORSEPOWER Gross:19 kw 00 HP @ 00 rpm Net:10 kw 1 HP @ 00 rpm OPERATING WEIGHT 10 00 kg 9,0 1,0 lb PC0- PC 0 www.komatsu.com Printed in Japan 000 IP.As(10) Photo may include optional equipment.

More information

HYDRAULIC EXCAVATOR PC700LC-8R BACKHOE

HYDRAULIC EXCAVATOR PC700LC-8R BACKHOE HORSEPOWER Gross:323 kw 433 HP @ 1800 rpm Net:320 kw 429 HP @ 1800 rpm OPERATING WEIGHT 65700 67800 kg 144,840 149,470 lb BACKHOE PC 700 LC Photo may include optional equipment. WALK-AROUND Productivity

More information

HYDRAULIC EXCAVATOR PC800-8E0 BACKHOE PC800-8E0 LOADING SHOVEL

HYDRAULIC EXCAVATOR PC800-8E0 BACKHOE PC800-8E0 LOADING SHOVEL PC800-8E0 BACKHOE PC800-8E0 LOADING SHOVEL HORSEPOWER Gross: 370 kw 496 HP @ 1800 rpm Net: 363 kw 487 HP @ 1800 rpm OPERATING WEIGHT Backhoe: 74500 78110 kg 164,240 172,200 lb Loading shovel: 77300 kg

More information

FLYWHEEL HORSEPOWER 180 kw rpm OPERATING WEIGHT kg 80,989 82,239 lb BUCKET CAPACITY m

FLYWHEEL HORSEPOWER 180 kw rpm OPERATING WEIGHT kg 80,989 82,239 lb BUCKET CAPACITY m FLYWHEEL HORSEPOWER 180 kw 242 HP @ 1900 rpm OPERATING WEIGHT 36736 37303 kg 80,989 82,239 lb BUCKET CAPACITY 0.88 2.33 m 3 1.15 3.05 yd 3 Photo may include optional equipment. HYDRAULIC EXCAVATOR PC300HD-7

More information

PC NET HORSEPOWER 68 kw rpm OPERATING WEIGHT kg 27,700 lb. BUCKET CAPACITY m yd 3

PC NET HORSEPOWER 68 kw rpm OPERATING WEIGHT kg 27,700 lb. BUCKET CAPACITY m yd 3 NET HORSEPOWER 68 kw 92 HP @ 2200 rpm OPERATING WEIGHT 12560 kg 27,700 lb PC130-8 BUCKET CAPACITY 0.18 0.6 m 3 0.24 0.78 yd 3 PC 130 Photo may include optional equipment. HYDRAULIC EXCAVATOR PC130-8 H

More information

HYDRAULIC EXCAVATOR PC200-8 PC200LC-8

HYDRAULIC EXCAVATOR PC200-8 PC200LC-8 PC00-8 PC00LC-8 FLYWHEEL HORSEPOWER Gross: 116 kw 155 HP @ 000 rpm Net: 110 kw 148 HP @ 000 rpm OPERATING WEIGHT PC00-8: 19400 0010 kg 4,770 44,110 lb PC00LC-8: 0630 1460 kg 45,480 47,310 lb PC 00 Photo

More information

PC270-7 HYDRAULIC EXCAVATOR. FLYWHEEL HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 59,300 61,310 lb

PC270-7 HYDRAULIC EXCAVATOR. FLYWHEEL HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 59,300 61,310 lb FLYWHEEL HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 26900 27810 kg 59,300 61,310 lb PC270-7 UCKET CAPACITY 1.26 m 3 1.65 yd 3 PC 270 PC270-7 WALK-AROUND PC270-7 Hydraulic Excavator uilding on

More information

PC LC. NET HORSEPOWER 86 kw rpm OPERATING WEIGHT kg 36,770 37,740 lb BUCKET CAPACITY m

PC LC. NET HORSEPOWER 86 kw rpm OPERATING WEIGHT kg 36,770 37,740 lb BUCKET CAPACITY m NET HORSEPOWER 86 kw 115 HP @ 2200 rpm OPERATING WEIGHT 16680 17120 kg 36,770 37,740 lb PC160LC-8 BUCKET CAPACITY 0.37 0.95 m 3 0.48 1.24 yd 3 PC 160 LC HYDRAULIC EXCAVATOR Photo may include optional equipment.

More information

COMPACT HYDRAULIC EXCAVATOR PC70-8

COMPACT HYDRAULIC EXCAVATOR PC70-8 PC70-8 FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP / 1950 min -1 Net: 48.5 kw 65 HP / 1950 min -1 OPERATING WEIGHT 6590 kg BUCKET CAPACITY 0.30-0.37m 3 PC 70 Photos may include optional equipment. COMPACT

More information

PC750 SERIES. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 157, ,055 lb PC750LC-6 PC750SE-6 HYDRAULIC EXCAVATOR PC750

PC750 SERIES. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 157, ,055 lb PC750LC-6 PC750SE-6 HYDRAULIC EXCAVATOR PC750 PC750 SERIES PC750LC-6 PC750SE-6 NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT 71556 80764 kg 157,780 178,055 lb PC750 HYDRAULIC EXCAVATOR PC750 Series Hydraulic Excavator WALK-AROUND With the introduction

More information

COMPACT HYDRAULIC EXCAVATOR PC70-8

COMPACT HYDRAULIC EXCAVATOR PC70-8 FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP / 1950 min -1 Net: 48.5 kw 65 HP / 1950 min -1 OPERATING WEIGHT 6590 kg BUCKET CAPACITY 0.30-0.37m 3 PC 70 Photos may include optional equipment. COMPACT HYDRAULIC

More information

HYDRAULIC EXCAVATOR. PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine

HYDRAULIC EXCAVATOR. PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine NET HORSEPOWER 66.2 kw 89 HP @ 2200 rpm OPERATING WEIGHT 12600 12871 kg 27,780 28,375 lb PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine BUCKET CAPACITY 0.34 0.70 m 3 0.44 0.92 yd 3 HYDRAULIC EXCAVATOR

More information

HYDRAULIC EXCAVATOR PC228USLC-3 228US. FLYWHEEL HORSEPOWER 107 kw rpm OPERATING WEIGHT kg 50,070 51,280 lb

HYDRAULIC EXCAVATOR PC228USLC-3 228US. FLYWHEEL HORSEPOWER 107 kw rpm OPERATING WEIGHT kg 50,070 51,280 lb FLYWHEEL HORSEPOWER 107 kw 143 HP @ 1950 rpm OPERATING WEIGHT 22710 23260 kg 50,070 51,280 lb WITH E.M.M.S BUCKET CAPACITY 0.50 1.52 m 3 0.65 2.0 yd 3 PC 228US LC Photo may include optional equipment.

More information

HYDRAULIC EXCAVATOR PC850-8R1 BACKHOE

HYDRAULIC EXCAVATOR PC850-8R1 BACKHOE STANDARD EQUIPMENT ENGINE AND RELATED ITEMS: Air cleaner, double element, dry Engine, Komatsu SAA6D140E-5 Variable speed cooling fan, with fan guard ELECTRICAL SYSTEM: Alternator, 60 amp, 4 V Auto decelerator

More information

HYDRAULIC EXCAVATOR PC450-8 PC450LC-8

HYDRAULIC EXCAVATOR PC450-8 PC450LC-8 HORSEPOWER Gross: 270 kw 362 HP / 1900 min -1 Net: 257 kw 345 HP / 1900 min -1 OPERATING WEIGHT : 43400 43820 kg PC450LC-8: 44400 44850 kg PC450LC-8 PC 450 Photo may include optional equipment. HYDRAULIC

More information

350LC-8 HYDRAULIC EXCAVATOR. Australian Specification

350LC-8 HYDRAULIC EXCAVATOR. Australian Specification FLYWHEEL HORSEPOWER Gross: 194 kw 260 HP @ 190 rpm Net: 184 kw 246 HP @ 190 rpm OPERATING WEIGHT PC30LC-8: 3,600 36,80 kg PC30LC-8 Australian Specification PC 30LC-8 Photo may include optional equipment.

More information

PC270LC-8. With Tier 3 Engine. NET HORSEPOWER 140 kw rpm OPERATING WEIGHT kg 65,336 67,393 lb

PC270LC-8. With Tier 3 Engine. NET HORSEPOWER 140 kw rpm OPERATING WEIGHT kg 65,336 67,393 lb NET HORSEPOWER 140 kw 187 HP @ 2050 rpm OPERATING WEIGHT 29636 30569 kg 65,336 67,393 lb PC270LC-8 With Tier 3 Engine BUCKET CAPACITY 0.58 1.63 m 3 0.76 2.13 yd 3 PC 270 LC Photo may include optional equipment

More information

COMPACT HYDRAULIC EXCAVATOR

COMPACT HYDRAULIC EXCAVATOR PC88MR-8 HORSEPOWER Gross: 0.7 kw 68 HP @ 190 rpm Net: 9 kw 6 HP @ 190 rpm OPERATING WEIGHT 822 839 kg 18,10 18,10 lb BUCKET CAPACITY 0.09 0.3 m 3 0.12 0. yd 3 PC 88MR Photo may include optional equipment.

More information

HYDRAULIC EXCAVATOR PC138US-8 138US. HORSEPOWER Gross: 72.1 kw rpm Net: 68.4 kw rpm

HYDRAULIC EXCAVATOR PC138US-8 138US. HORSEPOWER Gross: 72.1 kw rpm Net: 68.4 kw rpm HORSEPOWER Gross: 72.1 kw 96.6 HP @ 2200 rpm Net: 68.4 kw 91.7 HP @ 2200 rpm OPERATING WEIGHT 13480 13850 kg 29,720 30,540 lb BUCKET CAPACITY PC138US-8 0.18 0.6 m 3 0.24 0.78 yd 3 PC 138US Photo may include

More information

HYDRAULIC EXCAVATOR PC200-8 PC200LC-8

HYDRAULIC EXCAVATOR PC200-8 PC200LC-8 FLYWHEEL HORSEPOWER Gross: 110 kw 147 HP / 2000 min -1 Net: 103 kw 138 HP / 2000 min -1 OPERATING WEIGHT PC200-8M0: 19800 20500 kg PC200LC-8M0: 20700 21700 kg PC200-8 PC200LC-8 PC 200 HYDRAULIC EXCAVATOR

More information

Hydraulic Excavator PC750LC-7 PC750SE-7 PC750LC/SE-7

Hydraulic Excavator PC750LC-7 PC750SE-7 PC750LC/SE-7 PC750LC-7 PC750SE-7 NET HORSEPOWER 338 kw 454 HP @ 1.800 rpm OPERATING WEIGHT PC750LC-7: 80.645-83.760 kg PC750SE-7: 76.245-78.660 kg BUCKET CAPACITY 3,6-6,0 m³ PC 750 Hydraulic Excavator PC750LC/SE-7

More information

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0 GROSS HORSEPOWER 110 KW 147 HP NET HORSEPOWER 103 KW 138 HP OPERATING WEIGHT 23,350 kg MAX HORIZONTAL REACH 15,240 mm Super Long Front PC 210 HYDRAULIC EXCAVATOR H Y D R A U L I C E X C A V A T O R WALK

More information

PC270LC-6. NET HORSEPOWER 130 kw 174 HP OPERATING WEIGHT kg 62,830 65,035 lb HYDRAULIC EXCAVATOR PC270LC-6

PC270LC-6. NET HORSEPOWER 130 kw 174 HP OPERATING WEIGHT kg 62,830 65,035 lb HYDRAULIC EXCAVATOR PC270LC-6 PC270LC-6 NET HORSEPOWER 130 kw 174 HP OPERATING WEIGHT 28500 29500 kg 62,830 65,035 lb PC270LC-6 HYDRAULIC EXCAVATOR PC270LC-6 Hydraulic Excavator WALK-AROUND Komatsu distributors own the reputation of

More information

PC600LC-8 MATERIAL HANDLER. NET HORSEPOWER 320 kw 429 1,800 rpm OPERATING WEIGHT kg 145, ,586 lb REACH

PC600LC-8 MATERIAL HANDLER. NET HORSEPOWER 320 kw 429 1,800 rpm OPERATING WEIGHT kg 145, ,586 lb REACH MATERIAL HANDLER NET HORSEPOWER 320 kw 429 HP @ 1,800 rpm OPERATING WEIGHT 66083 67399 kg 145,686 148,586 lb REACH 16.8 18.3 m 55' 60' PC 600 LC Photos may include optional equipment MATERIAL HANDLER M

More information

FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier

FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier NET HORSEPOWER 107 kw 143 HP @ 1950 rpm OPERATING WEIGHT 28610 kg 63,074 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier PC 200 LL FORESTRY MACHINE Local

More information

PC600LC-6. NET HORSEPOWER 286 kw 384 HP OPERATING WEIGHT kg 131, ,160 lb HYDRAULIC EXCAVATOR PC600LC-6

PC600LC-6. NET HORSEPOWER 286 kw 384 HP OPERATING WEIGHT kg 131, ,160 lb HYDRAULIC EXCAVATOR PC600LC-6 PC600LC-6 NET HORSEPOWER 286 kw 384 HP OPERATING WEIGHT 59600 60400 kg 131,393 133,160 lb PC600LC-6 HYDRAULIC EXCAVATOR PC600LC-6 Series Hydraulic Excavator WALK-AROUND Komatsu excavators own the reputation

More information

FLYWHEEL HORSEPOWER 485 kw rpm OPERATING WEIGHT kg 235, ,560 lb HYDRAULIC EXCAVATOR

FLYWHEEL HORSEPOWER 485 kw rpm OPERATING WEIGHT kg 235, ,560 lb HYDRAULIC EXCAVATOR FLYWHEEL HORSEPOWER 485 kw 651 HP @ 1800 rpm OPERTING WEIGHT 106700 113200 kg 235,270 249,560 lb HYDRULIC EXCVTOR PC1250-7 Series Hydraulic Excavator WLK-ROUND Protected hydraulic circuit The cool-running

More information

HYDRAULIC EXCAVATOR COMPACT PC70-8

HYDRAULIC EXCAVATOR COMPACT PC70-8 FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP @ 1950 min -1 Net: 48.5 kw 65 HP @ 1950 min -1 OPERATING WEIGHT 6500 kg BUCKET CAPACITY 0.3-0.37m 3 PC 70 www.komatsu.com Printed in Japan 201106 IP.As Photo may

More information

FORESTRY MACHINE PC300LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top

FORESTRY MACHINE PC300LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top NET HORSEPOWER 180 kw 242 HP @ 1900 rpm OPERATING WEIGHT 42941 kg 94,669 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top PC 300 LL FORESTRY MACHINE Local option included

More information

HYDRAULIC EXCAVATOR PC300-8M0 PC300LC-8M0 PC350LC-8M0. Australian - NZ Specification

HYDRAULIC EXCAVATOR PC300-8M0 PC300LC-8M0 PC350LC-8M0. Australian - NZ Specification PC300LC-8M0 Australian - NZ Specification Flywheel Horsepower Gross: 194 kw 260 HP / 1950 min -1 Net: 187 kw 250 HP / 1950 min -1 operating weight : 33400 33900kg PC300LC-8M0: 34200 34700kg : 35800 36600kg

More information

PC600LC-6. NET HORSEPOWER 287 kw 385 HP OPERATING WEIGHT kg 131, ,160 lb WITH SA6D140E-3 KOMATSU ENGINE HYDRAULIC EXCAVATOR

PC600LC-6. NET HORSEPOWER 287 kw 385 HP OPERATING WEIGHT kg 131, ,160 lb WITH SA6D140E-3 KOMATSU ENGINE HYDRAULIC EXCAVATOR WITH SA6D140E-3 KOMATSU ENGINE NET HORSEPOWER 287 kw 385 HP OPERATING WEIGHT 59600 60400 kg 131,393 133,160 lb HYDRAULIC EXCAVATOR Series Hydraulic Excavator WALK-AROUND Komatsu excavators own the reputation

More information

HORSEPOWER HP / HP

HORSEPOWER HP / HP PC 500 LC HORSEPOWER Gross: 270 kw 362 HP / 1900 min -1 Net: 257 kw 345 HP / 1900 min -1 OPERATING WEIGHT 47700 50600 kg BUCKET CAPACITY 2.70 4.00 m 3 Photos may include optional equipment. WA L K-A R

More information

PC300LC-6. FLYWHEEL HORSEPOWER 173 kw rpm OPERATING WEIGHT kg 71,474 74,803 lb HYDRAULIC EXCAVATOR PC300LC-6

PC300LC-6. FLYWHEEL HORSEPOWER 173 kw rpm OPERATING WEIGHT kg 71,474 74,803 lb HYDRAULIC EXCAVATOR PC300LC-6 PC300LC-6 FLYWHEEL HORSEPOWER 173 kw 232 HP @ 1750 rpm OPERATING WEIGHT 32420 33930 kg 71,474 74,803 lb PC300LC-6 HYDRAULIC EXCAVATOR PC300LC-6 Hydraulic Excavator WALK-AROUND The PC300 follows the strategy

More information

NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC35MR-3 PC 35MR. Photo may include optional equipment.

NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC35MR-3 PC 35MR. Photo may include optional equipment. NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC 35MR COMPACT HYDRAULIC EXCAVATOR Photo may include optional equipment. C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND Performance and Versatility

More information

NET HORSEPOWER 66 kw rpm OPERATING WEIGHT kg BUCKET CAPACITY max. 0,8 m³ PC130-7 HYDRAULIC EXCAVATOR PC130-7

NET HORSEPOWER 66 kw rpm OPERATING WEIGHT kg BUCKET CAPACITY max. 0,8 m³ PC130-7 HYDRAULIC EXCAVATOR PC130-7 NET HORSEPOWER 66 kw 88 HP @ 2.200 rpm OPERATING WEIGHT 13.000 kg BUCKET CAPACITY max. 0,8 m³ PC 130 H YDRAULIC EXCAVATOR WALK-AROUND The is a rugged, productive, all-european machine. Designed and expressly

More information

PC800LC-8 MATERIAL HANDLER. NET HORSEPOWER 363 kw rpm OPERATING WEIGHT kg 193, ,955 lb REACH

PC800LC-8 MATERIAL HANDLER. NET HORSEPOWER 363 kw rpm OPERATING WEIGHT kg 193, ,955 lb REACH MATERIAL HANDLER NET HORSEPOWER 363 kw 487 HP @ 1800 rpm OPERATING WEIGHT 87796 89339 kg 193,555 196,955 lb REACH 16.8 20.7 m 55' 68' PC 800 LC Photos may include optional equipment MATERIAL HANDLER M

More information

NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR. Photo may include optional equipment.

NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR. Photo may include optional equipment. NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR COMPACT HYDRAULIC EXCAVATOR Photo may include optional equipment. PC18MR-3 C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND Performance

More information

HYDRAULIC EXCAVATOR HB335/335LC-1 HB365/365LC-1. Preliminary. HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1

HYDRAULIC EXCAVATOR HB335/335LC-1 HB365/365LC-1. Preliminary. HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1 HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1 H335/335LC-1 H365/365LC-1 Preliminary OPERTING WEIGHT H335-1: 32200-33100 kg H335LC-1: 33500-34500 kg H365-1: 34400-34700

More information

HYDRAULIC EXCAVATOR PC650LC-8. NET HORSEPOWER 320 kw rpm OPERATING WEIGHT kg 139, ,390 lb

HYDRAULIC EXCAVATOR PC650LC-8. NET HORSEPOWER 320 kw rpm OPERATING WEIGHT kg 139, ,390 lb NET HORSEPOWER 320 kw 429 HP @ 1800 rpm OPERATING WEIGHT 63199 66401 kg 139,330 146,390 lb PC650LC-8 UCKET CAPACITY 1.57 3.81 m 3 2.05 4.98 yd 3 PC 650 LC Photo may include optional equipment. HYDRAULIC

More information

PC400-7 PC400LC-7 HYDRAULIC EXCAVATOR. FLYWHEEL HORSEPOWER 246 kw rpm

PC400-7 PC400LC-7 HYDRAULIC EXCAVATOR. FLYWHEEL HORSEPOWER 246 kw rpm FLYWHEEL HORSEPOWER 246 kw 330 HP @ 1850 rpm P400L-7 OPERTING WEIGHT : 41400 42250 kg 91,270 93,140 lb P400L-7: 42400 43300 kg 93,480 95,460 lb P 400 Photo may include optional equipment. HYDRULI EXVTOR

More information

CRAWLER EXCAVATOR SERIES PC600-6

CRAWLER EXCAVATOR SERIES PC600-6 RWLER EXVTOR SERIES P600-6 The machine shown may vary according to territory specifications The P600-6 is a state of the art European made excavator, setting new standards for cycle times, operator comfort,

More information

PC300HD-6. FLYWHEEL HORSEPOWER 173 kw rpm OPERATING WEIGHT kg 78,860 80,755 lb HYDRAULIC EXCAVATOR PC300HD-6

PC300HD-6. FLYWHEEL HORSEPOWER 173 kw rpm OPERATING WEIGHT kg 78,860 80,755 lb HYDRAULIC EXCAVATOR PC300HD-6 PC300HD-6 FLYWHEEL HORSEPOWER 173 kw 232 HP @ 1750 rpm OPERATING WEIGHT 35770 36630 kg 78,860 80,755 lb PC300HD-6 HYDRAULIC EXCAVATOR PC300HD-6 Hydraulic Excavator WALK-AROUND The PC300 follows the strategy

More information

PC2000 PC Backhoe Loading Shovel. OPERATING WEIGHT Backhoe: 440, ,000 lb kg

PC2000 PC Backhoe Loading Shovel. OPERATING WEIGHT Backhoe: 440, ,000 lb kg -8 Backhoe Loading Shovel HORSEPOWER Gross: 976 HP 728 kw @ 1800 rpm Net: 956 HP 713 kw @ 1800 rpm OPERATING WEIGHT Backhoe: 440,920 450,000 lb 200000 204120 kg OPERATING WEIGHT Loading Shovel: 429,900

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

PC130F-7 HYDRAULIC EXCAVATOR 130F FLYWHEEL HORSEPOWER OPERATING WEIGHT kg, lb. 66 kw rpm

PC130F-7 HYDRAULIC EXCAVATOR 130F FLYWHEEL HORSEPOWER OPERATING WEIGHT kg, lb. 66 kw rpm FLYWHEEL HORSEPOWER 66 kw 88 HP @ 2.200 rpm OPERATING WEIGHT 13.975 kg, 30.809 lb PC 130F 200-8 130F Photo may include optional equipment. HYDRAULIC EXCAVATOR H YDRAULIC E XCAVATOR WALK-AROUND The hydraulic

More information

EX5500 BACKHOE ATTACHMENT. Engine Gross Power : 2 x kw (2 x hp) Operating Weight Loading Shovel : kg ( lb) Backhoe only

EX5500 BACKHOE ATTACHMENT. Engine Gross Power : 2 x kw (2 x hp) Operating Weight Loading Shovel : kg ( lb) Backhoe only EX00 BACKHOE ATTACHMENT Bucket assembly with bucket points Weight: 29 200 kg (6 390 lb) Capacity: 29.0 m3 (38.0 yd3; PCSA heaped) Width: 3 900 (12'") BE-Arm assembly Weight: 37 000 kg (81 600 lb) Width:

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

PC390LC-8M0. Photos may include optional equipment.

PC390LC-8M0. Photos may include optional equipment. PC 390 LC HORSEPOWER Gross: 194 kw 260 HP / 1950 min -1 Net: 187 kw 250 HP / 1950 min -1 OPERATING WEIGHT 38600 39900 kg BUCKET CAPACITY 2.30 2.80 m 3 Photos may include optional equipment. WA L K-A R

More information

HYDRAULIC EXCAVATOR PC BACKHOE PC LOADINGSHOVEL

HYDRAULIC EXCAVATOR PC BACKHOE PC LOADINGSHOVEL BACKHOE LOADINGSHOVEL HORSEPOWER Gross: 728 kw 976 HP @ 1800 rpm Net: 713 kw 956 HP @ 1800 rpm OPERATING WEIGHT Backhoe: 200000 204120 kg 440,920 450,000 lb Loading shovel: 195000 kg 429,900 lb PC 2000

More information

MOBILE CRUSHER. BR380JG-1 With Tier 3 Engine. NET HORSEPOWER 140 kw rpm OPERATING WEIGHT kg 72,090 lb

MOBILE CRUSHER. BR380JG-1 With Tier 3 Engine. NET HORSEPOWER 140 kw rpm OPERATING WEIGHT kg 72,090 lb NET HORSEPOWER 140 kw 187 HP @ 2050 rpm OPERATING WEIGHT 32700 kg 72,090 lb BR380JG-1 With Tier 3 Engine BR 380 JG MOBILE CRUSHER Photos may include optional equipment BR380JG-1 M OBILE C RUSHER WALK-AROUND

More information

NET HORSEPOWER 29.5 kw rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb

NET HORSEPOWER 29.5 kw rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb NET HORSEPOWER 29.5 kw 40 HP @ 2450 rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb D21A-8 D21P-8 D 21 CRAWLER DOZER Photos may include optional equipment. D21A/P-8 C R A W L E R

More information

MOBILE CRUSHER. BR580JG-1 With Tier 3 Engine. NET HORSEPOWER 257 kw rpm OPERATING WEIGHT kg 108, ,440 lb

MOBILE CRUSHER. BR580JG-1 With Tier 3 Engine. NET HORSEPOWER 257 kw rpm OPERATING WEIGHT kg 108, ,440 lb NET HORSEPOWER 257 kw 345 HP @ 1900 rpm OPERATING WEIGHT 49000-51000 kg 108,000-112,440 lb BR580JG-1 With Tier 3 Engine BR 580 JG MOBILE CRUSHER Photo may include optional equipment BR580JG-1 M OBILE C

More information

FLYWHEEL HORSEPOWER 180 kw rpm OPERATING WEIGHT PC300-7: kg 67,900 69,470 lb PC300LC-7: kg 69,490 71,160 lb

FLYWHEEL HORSEPOWER 180 kw rpm OPERATING WEIGHT PC300-7: kg 67,900 69,470 lb PC300LC-7: kg 69,490 71,160 lb P300-7 P300L-7 FLYWHEEL HORSEPOWER 180 kw 242 HP @ 1900 rpm OPERTING WEIGHT P300-7: 30800 31510 kg 67,900 69,470 lb P300L-7: 31520 32280 kg 69,490 71,160 lb P 300 Photo may include optional equipment.

More information

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) 925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator

More information

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34. 922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,

More information

PC30MR. U.S. EPA Tier 4 Final Engine. Australian-NZ specifications COMPACT HYDRAULIC EXCAVATOR. Printed in Japan IP.As OPERATING WEIGHT

PC30MR. U.S. EPA Tier 4 Final Engine. Australian-NZ specifications COMPACT HYDRAULIC EXCAVATOR. Printed in Japan IP.As OPERATING WEIGHT U.S. EPA Tier 4 Final Engine Australian-NZ specifications https://home.komatsu/en/ Printed in Japan 201711 IP.As PC30MR COMPACT HYDRAULIC EXCAVATOR CEN00798-00 Materials and specifications are subject

More information

HB205-1 HB215LC - 1. Photo may include optional equipment.

HB205-1 HB215LC - 1. Photo may include optional equipment. HB205-1 HB215LC - 1 www.komatsu.com HB 205 Printed in Japan 201101 IP.As Komatsu South Africa (Pty) Ltd cnr Diesel & Isando Roads, Isando 1600, South Africa Tel: +27 11 923 1000 I Fax: +27 11 923 1303

More information

HYDRAULIC EXCAVATOR PC2000-8

HYDRAULIC EXCAVATOR PC2000-8 HORSEPOWER Gross: 728 kw 976 HP @ 1800 rpm Net: 713 kw 956 HP @ 1800 rpm OPERATING WEIGHT Backhoe: 200000 204120 kg 440,920 450,000 lb Loading shovel: 195000 kg 429,900 lb PC 2000 Photo may include optional

More information

COMPACT HYDRAULIC EXCAVATOR

COMPACT HYDRAULIC EXCAVATOR OPERATING WEIGHT,780 kg 3,20 lb 2,55 kg,750 lb 2,80 kg 6,3 lb 3, kg 6,20 lb 3,575 kg 7,880 lb,755 kg 0,80 lb 5,60 kg,380 lb COMPACT HYDRAULIC EXCAVATOR C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND OPERATING

More information

PC138USLC. Tier 4 Interim Engine. NET HORSEPOWER rpm rpm. OPERATING WEIGHT 31,791 32,628 lb kg

PC138USLC. Tier 4 Interim Engine. NET HORSEPOWER rpm rpm. OPERATING WEIGHT 31,791 32,628 lb kg PC138USLC-10 Tier 4 Interim Engine PC138USLC NET HORSEPOWER 93.5 HP @ 2050rpm 68.8 kw @ 2050rpm Photos may include optional equipment OPERATING WEIGHT 31,791 32,628 lb 14420 14800 kg BUCKET CAPACITY 0.34

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

NET HORSEPOWER 66 kw rpm OPERATING WEIGHT kg BUCKET CAPACITY max. 0,8 m³ PC Hydraulic Excavator PC130-7

NET HORSEPOWER 66 kw rpm OPERATING WEIGHT kg BUCKET CAPACITY max. 0,8 m³ PC Hydraulic Excavator PC130-7 NET HORSEPOWER 66 kw 88 HP @ 2.200 rpm OPERATING WEIGHT 13.000 kg BUCKET CAPACITY max. 0,8 m³ PC 130 Hydraulic Excavator H YDRAULIC EXCAVATOR WALK-AROUND The is a rugged, productive, all-european machine.

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

EX SPECIFICATIONS

EX SPECIFICATIONS EX8000-6 SPECIFICATIONS S H O V E L B U C K E T C A P A C I T Y ( H E A P E D ) : SAE(2:1): 52.3 YD. 3 (40.0 M 3 ) O P E R A T I N G W E I G H T: LOADING SHOVEL 1,787,900 LB. (811 000 KG) R A T E D P O

More information

WHEEL LOADER WA With Tier 3 Engine

WHEEL LOADER WA With Tier 3 Engine With Tier 3 Engine HORSEPOWER Gross: 173 kw 232 HP @ 2100 rpm Net: 172 kw 231 HP @ 2100 rpm OPERATING WEIGHT 18530 18700 kg 40,840 41,226 lb BUCKET CAPACITY 3.1 4.3 m 3 4.1 5.6 yd 3 WA 430 WHEEL LOADER

More information

TOUGH WORLD. TOUGH EQUIPMENT.

TOUGH WORLD. TOUGH EQUIPMENT. Engine Yanmar 4TNV98 Net Power 44.5 kw (60 hp) Operating Weight 7,500 kg Bucket Capacity 0.32 m³ 908E EXCAVATOR TOUGH WORLD. TOUGH EQUIPMENT. 1 MAXIMIZE YOUR RETURN ON INVESTMENT POWERFUL ENGINE The 908E

More information

WHEEL LOADER. With Tier 3 Engine and. NET HORSEPOWER 203 kw rpm OPERATING WEIGHT kg 51,850 52,150 lb

WHEEL LOADER. With Tier 3 Engine and. NET HORSEPOWER 203 kw rpm OPERATING WEIGHT kg 51,850 52,150 lb NET HORSEPOWER 203 kw 272 HP @ 2000 rpm OPERATING WEIGHT 23520 23655 kg 51,850 52,150 lb WA470-6 With Tier 3 Engine and Large-Capacity Torque Converter BUCKET CAPACITY 3.8 5.2 m 3 5.0-6.8 yd 3 WA 470 WHEEL

More information

PC210LC. Tier 4 Interim Engine. OPERATING WEIGHT 48,950 52,036 lb kg. NET HORSEPOWER rpm rpm

PC210LC. Tier 4 Interim Engine. OPERATING WEIGHT 48,950 52,036 lb kg. NET HORSEPOWER rpm rpm PC210LC-10 Tier 4 Interim Engine PC210LC NET HORSEPOWER 158 HP @ 2000rpm 118 kw @ 2000rpm OPERATING WEIGHT 48,950 52,036 lb 22203 23603 kg BUCKET CAPACITY 0.66 1.57 yd 3 0.50 1.20 m 3 Photos may include

More information

CRAWLER DOZER. NET HORSEPOWER 79 kw rpm OPERATING WEIGHT D39EX-22: 9040 kg 19,930 lb D39PX-22: 9480 kg 20,900 lb D39PX-22 D39EX-22

CRAWLER DOZER. NET HORSEPOWER 79 kw rpm OPERATING WEIGHT D39EX-22: 9040 kg 19,930 lb D39PX-22: 9480 kg 20,900 lb D39PX-22 D39EX-22 NET HORSEPOWER 79 kw 105 HP @ 2200 rpm OPERATING WEIGHT D39EX-22: 9040 kg 19,930 lb D39PX-22: 9480 kg 20,900 lb D39EX-22 D39PX-22 D 39 C RAWLER D OZER WALK-AROUND All-around visibility Super-slant nose

More information

PC360LC-11 Tier 4 Final Engine

PC360LC-11 Tier 4 Final Engine PC360LC-11 Tier 4 Final Engine Hydraulic Excavator Photos may include optional equipment. NET Horsepower 257 HP @ 1950 rpm 192 kw @ 1950 rpm operating weight 78,645 80,547 lb 35,627 36,535 kg bucket capacity

More information

ZAXIS-5 series SUPER LONG FRONT. ZX85US-5B 34.1 kw (45.7 HP) kg. Model Code Engine Rated Power Operating Weight

ZAXIS-5 series SUPER LONG FRONT. ZX85US-5B 34.1 kw (45.7 HP) kg. Model Code Engine Rated Power Operating Weight ZAXIS-5 series SUPER LONG FRONT A P P L I C A T I O N & A T T A C H M E N T Model Code Engine Rated Power Operating Weight ZX85US-5B 34.1 kw (45.7 HP) 9 170-9 340 kg SPECIFICATIONS ENGINE Model... Yanmar

More information

With Tier 4 Interim Engine installed. hyundai heavy industries

With Tier 4 Interim Engine installed. hyundai heavy industries With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

Hydraulic Excavator. PC Backhoe PC Loading Shovel PC2000-8

Hydraulic Excavator. PC Backhoe PC Loading Shovel PC2000-8 Backhoe Loading Shovel ENGINE POWER 728 kw / 976 HP @ 1.800 rpm OPERATING WEIGHT Backhoe: 200.000-204.120 kg Loading shovel: 195.000 kg BUCKET CAPACITY Backhoe: 12,0 m³ Loading shovel: 11,0 m³ PC 2000

More information

D68ESS-12 CRAWLER DOZER 68ESS. HORSEPOWER Gross: 130 kw rpm Net: 116 kw rpm OPERATING WEIGHT kg 36,710 lb

D68ESS-12 CRAWLER DOZER 68ESS. HORSEPOWER Gross: 130 kw rpm Net: 116 kw rpm OPERATING WEIGHT kg 36,710 lb HORSEPOWER Gross: 130 kw 175 HP @ 1850 rpm Net: 116 kw 155 HP @ 1850 rpm OPERATING WEIGHT 16650 kg 36,710 lb D68ESS-12 D 68ESS Photo may include optional equipment. CRAWLER DOZER D68ESS-12 C RAWLER D OZER

More information

HB215LC-1 HYBRID. OPERATING WEIGHT 21,850 kg 48,175 lb. BUCKET CAPACITY m yd 3

HB215LC-1 HYBRID. OPERATING WEIGHT 21,850 kg 48,175 lb. BUCKET CAPACITY m yd 3 HYBRID NET HORSEPOWER 104 kw @ 2000 rpm 139 HP @ 2000 rpm Photos may include optional equipment OPERATING WEIGHT 21,850 kg 48,175 lb BUCKET CAPACITY 0.50 1.20 m 3 0.66 1.57 yd 3 Walk-Around Komatsu Technology

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

Hydraulic Excavator PC600-8 PC600LC-8 PC600/LC-8

Hydraulic Excavator PC600-8 PC600LC-8 PC600/LC-8 PC600LC-8 ENGINE POWER 323 kw / 433 HP @ 1.800 rpm OPERTING WEIGHT : 57.640-58.460 kg PC600LC-8: 58.640-60.380 kg UCKET CPCITY max. 3,5 m³ PC 600 Hydraulic Excavator PC600/LC-8 H YDRULIC EXCVTOR WLK-ROUND

More information

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive 330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier

More information

ZAXIS series Magnet Machines MAGNET MACHINES. Model Code Engine Rated Power Operating Weight ZX200LC-5G ZX240LC-5G ZX330LC-5G

ZAXIS series Magnet Machines MAGNET MACHINES. Model Code Engine Rated Power Operating Weight ZX200LC-5G ZX240LC-5G ZX330LC-5G ZAXIS series Magnet Machines MAGNET MACHINES A P P L I C A T I O N Model Code Engine Rated Power Operating Weight & A T T A C H M E N T ZX120 ZX200-5G ZX200LC-5G ZX240LC-5G ZX330LC-5G 65 kw (87HP) 125

More information

PC290LC. Tier 4 Interim Engine. OPERATING WEIGHT 67,396 68,654 lb kg. NET HORSEPOWER rpm rpm

PC290LC. Tier 4 Interim Engine. OPERATING WEIGHT 67,396 68,654 lb kg. NET HORSEPOWER rpm rpm Tier 4 Interim Engine PC290LC NET HORSEPOWER 196 HP @ 2050 rpm 147 kw @ 2050 rpm OPERATING WEIGHT 67,396 68,654 lb 30570 31141 kg BUCKET CAPACITY 0.76 2.13 yd 3 0.58 1.63 m 3 Photos may include optional

More information

Super Long Front PC240LC-7 PC240NLC-7 PC240LC/NLC-7

Super Long Front PC240LC-7 PC240NLC-7 PC240LC/NLC-7 NET HORSEPOWER 125 kw 168 HP @ 2.000 rpm OPERATING WEIGHT 26.119 kg - 29.634 kg MAX. HORIZONTAL REACH 18.250 mm PC240LC-7 PC240NLC-7 PC 240 Super Long Front PC240LC/NLC-7 PC240-7 H YDRAULIC EXCAVATOR WALK-AROUND

More information

PC88MR-10 Tier 4 Final Engine

PC88MR-10 Tier 4 Final Engine PC88MR-10 Tier 4 Final Engine COMPACT HYDRAULIC EXCAVATOR Photos may include optional equipment. NET HORSEPOWER 65.5 HP @ 1950 rpm 48.8 kw @ 1950 rpm OPERATING WEIGHT 18,739 19,290 lb 8500 8750 kg WALK-AROUND

More information

PC490LC. Tier 4 Interim Engine. OPERATING WEIGHT 104, ,250 lb kg. NET HORSEPOWER rpm rpm

PC490LC. Tier 4 Interim Engine. OPERATING WEIGHT 104, ,250 lb kg. NET HORSEPOWER rpm rpm PC490LC-10 Tier 4 Interim Engine PC490LC NET HORSEPOWER 359 HP @ 1900rpm 268 kw @ 1900rpm OPERATING WEIGHT 104,700 109,250 lb 47490 49555 kg BUCKET CAPACITY 1.47 4.15 yd 3 1.12 3.17 m 3 Photos may include

More information

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version ZAXIS-3 series Short-tail-swing version HYDRAULIC EXCAVATOR Model Code: ZX29U-3 Engine Rated Power: 19.7 kw (26.4 HP) Operating Weight: 3 060-3 230 kg Backhoe Bucket: 0.08 m 3 Advances in Hitachi Design

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler

More information

NET HORSEPOWER 66 kw rpm OPERATING WEIGHT kg BUCKET CAPACITY max. 0,72 m³ PC138US-2. Hydraulic Excavator PC138US-2

NET HORSEPOWER 66 kw rpm OPERATING WEIGHT kg BUCKET CAPACITY max. 0,72 m³ PC138US-2. Hydraulic Excavator PC138US-2 NET HORSEPOWER 66 kw 88 HP @ 2.200 rpm OPERTING WEIGHT 13.480-14.880 kg UCKET CPCITY max. 0,72 m³ PC 138 Hydraulic Excavator H YDRULIC EXCVTOR WLK-ROUND Working in congested or confined areas can be a

More information

PC78US-10 Tier 4 Final Engine

PC78US-10 Tier 4 Final Engine PC78US-10 Tier 4 Final Engine Compact Hydraulic Excavator Photos may include optional equipment. NET Horsepower 65.5 HP @ 1950 rpm 48.8 kw @ 1950 rpm operating weight 17,747 lb 8050 kg WALK-AROUND Photos

More information

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version ZAXIS-3 series Short-tail-swing version HYDRAULIC EXCAVATOR Model Code: ZX38U-3 Engine Rated Power: 21.3 kw (28.5 HP) Operating Weight: 3 790-3 960 kg Backhoe Bucket: 0.11 m 3 Advances in Hitachi Design

More information

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,

More information