BUILD YOUR OWN TRUCK HOIST ASSEMBLY AND MOUNTING INSTRUCTIONS FOR TRUCK HOIST (SINGLE LEVER) ITEM #
|
|
- Amberly Robinson
- 5 years ago
- Views:
Transcription
1 1 of Panet Road Winnipeg, MB R2C 2Z1 BUILD YOUR OWN TRUCK HOIST ASSEMBLY AND MOUNTING INSTRUCTIONS FOR TRUCK HOIST (SINGLE LEVER) ITEM # TRUCK HOIST 7 TON (SINGLE LEVER) ITEM # INTRODUCTION Congratulations on your choice of a Truck Hoist to compliment your heavy equipment operations. This equipment has been designed and manufactured to meet the needs of a light and heavy-duty industrial equipment operator. Use this manual as your first source of information it's purpose is to assist you in assembling operating and maintaining your Truck Hoist. Please read it carefully as it furnishes information which will help you achieve years of dependable trouble free operation. Safe, efficient and trouble-free operation of your hoist requires that you and anyone else who will be operating or maintaining it, read and understand all of the safety, operation, maintenance and trouble shooting information contained within this Operator's Manual. Keep this manual handy for frequent reference and to pass on to new operators or owners. WARRANTY-PARTS-SERVICE To obtain prompt, efficient service, always remember to give the item number and your model number. Whenever you need additional copies of this manual, parts, or repair service; contact Princess Auto Ltd. at: Telephone # Fax # Rev. 03
2 Page 2 of 9 SERIAL NUMBER Always give your dealer the Item # and Serial Number of the machine when ordering parts or requesting service information. SERIAL NUMBER ITEM # 2. TROUBLESHOOTING If the hoist does not operate properly, refer to this manual to check that all components welded and bolted have been mounted in their proper locations. Make sure that none of the welds have failed. This will cause binding of components that will damage other parts and create a dangerous environment for the user. It is strongly recommended to perform a thorough inspection of the unit before operating for the first time after assembly. Upon any other problems, please contact your nearest Princess Auto store or the Princess Auto manufacturing plant (phone numbers are at the start of this manual). 3. SERVICE AND MAINTENANCE All moving joints and surfaces must be lubricated using general purpose axle grease and all grease nipple locations must be injected with grease using a grease gun. Page 3 of 9
3 4. FRAME HOIST ASSEMBLY AND MOUNTING INSTRUCTIONS The angle to which the hoist will lift the box depends upon the mounting length. Figure 1 and Table 1 shows the different dumping angles and the corresponding mounting length. OVERHANG MOUNTING LENGTH DUMPIING ANGLE Figure 1 - PIVOT LOCATION Table 1 PIVOT LOCATION VALUES DUMPING ANGLE CORRESPONDING MOUNTING LENGTH 86 1/2" 76" 68" 61 1/2" It is recommended that to achieve the rated capacity of the hoist the dumping angle should be between 40 to 45 with an overhang of 2 to 3 feet. If the dumping angle is increased, it should be remembered that the capacity of the hoist will decrease. Also, on the larger boxes, a decrease in overhang will result in a decrease in capacity of the hoist. 4.1 Remove the Upper Frame from the chassis and survey the situation regarding how much overhang can be used yet remain to be practical. The overhang should not be more than 40" as any more could restrict the angle to which the box could be raised. Page 4 of 9
4 4.2 Determine where the hinges (not provided) will sit on the chassis and upper frame, and modify the frame rails accordingly. A good rule-of-thumb is to cut the chassis 6" back from the rear crossmember and spring brackets. Note: When the Upper Frame is mounted on the chassis with the Upper and Lower Hinges, ensure that there will be at least 3" of clearance between the front of the Upper Frame and the cab. 4.3 Bolt and weld the Lower Hinges to the chassis as they must be secure. 4.4 Place the Upper Frame on the chassis in the proper position and ensure that it is square. Mate the Upper Hinges with the Lower Hinges and bolt and weld the Upper Hinges to the rails of the Upper Frame. 4.5 Mount the Lower Hoist Angle S/A (6) onto the Pickup Pin of the hoist assembly (1) using bolts (7), lock washers (8), and nuts (9) to secure in place. Note: Cylinder on 7 T hoist item is assembled to the hoist lever for shipping purposes and needs to be taken off to allow proper installation of hoist to the chassis. 4.6 The hoist can now be secured to the chassis. Raise the Upper Frame and SECURELY prop the box in a raised position. Place the hoist on the chassis so that the Lower Hoist Angle S/A (6) rests across the frame rails. Assemble the Locating Rings (4) (if required) and the Connecting Posts (5) on the hoist. Bolt the Connecting Posts (5) to the Upper Frame rails at the distance determined from Table 1. Note: Before drilling holes in the Upper Frame, open lever assembly 1/2" from rest position. Both Connecting Posts (5) must be inline. Weld lever Locating Ring (4) (if required) to the Connecting Posts (5) to keep the hoist centered between the rails of the Upper Frame. Depending on the width between the rails of the Upper Frame, the Locating Rings (4) may not be needed. 4.7 Lower the Upper frame allowing the hoist to close and the bottom half to slide on the frame rails. With the Upper Frame lowered, the lower half of the hoist should be in proper position for mounting. Mark and drill holes into the Lower Hoist Angle S/A (6) to match the holes of the mounting hinges/frame rails on the chassis. The Upper Frame can now be raised and propped so as not to fall. 4.8 The ends of the Lower Hoist Angle S/A (6) can now be cut to the proper length, as necessary to fit the width of the chassis. Secure the Lower Hoist Angle S/A (6) to the chassis. 4.9 Assemble hydraulic cylinder. Ensure that the cylinder ports are pointing downwards toward the ground. Page 5 of 9
5 4.10 Install the pump and hydraulic hoses and fittings. When doing this, make sure that they cannot come in contact with the hot exhaust or interfere with moving parts. Note: Use sealing compound on all threaded fittings Fill the hydraulic pump with SAE 5 or 10 clean pure nondetergent mineral oil. It will be necessary to add more oil after the first lift since the cylinder will remain full of oil, reducing the amount in the reservoir. IMPORTANT: TO EXTEND THE LIFE OF YOUR HOIST AND MAINTAIN ITS LIFTING CAPACITY, ENSURE THAT ALL PIVOT POINTS ARE KEPT WELL GREASED. WARNING: ALL WELDING MUST BE PERFORMED BY A CERTIFIED WELDER. 5. SPECIFICATIONS General Dim. 42"W x 37"L x 11"H 42 W x 37 L x 11 H Weight 180 lbs. 220 lbs. Load Capacity 4" bore cylinder 7 T max. 4 bore cylinder 7T max. 5" bore cylinder 12 T max. 6. TOOLS REQUIRED FOR ASSEMBLY 1. Electric welder 2. Open and box end wrenches 3. Cutting torch 4. Heavy-duty drill (1/2" chuck or larger) 5. Hammer 6. C-clamps Page 6 of 9
6 10 TRUCK HOIST SINGLE LEVER ITEM# Page 7 of 9
7 PARTS LIST TRUCK HOIST SINGLE LEVER ITEM # No. Item No. Description Qty HOIST SINGLE CYL LEVER S/ASSY CYL 4014 TRUCK HOIST 7 TON (NOT INCLUDED) PIN CYL SINGLE LEVER LEVER LOCATION RING UPPER LEVER CONN POST HOIST MOUNT LOWER S/ASSY BOLT HEX UNC X 3.50 LG WASHER LOCK SPLIT REG.50 PTD NUT HEX UNC GR 5 PTD BOLT HEX UNC X 1.25 LG GR 5 PTD GREASE NIPPLE.313 X PIN CLEVIS.50 X 2.25 LG COTTER PIN.187 X 2.00 PLAIN COTTER PIN.109 X 1.50 PLATED 1 Page 8 of 9
8 10 TRUCK HOIST SINGLE LEVER ITEM# Page 9 of 9
9 PARTS LIST TRUCK HOIST SINGLE LEVER ITEM # No. Item No. Description Qty HOIST SINGLE CYL LEVER S/ASSY CYL 4014 TRUCK HOIST 7 TON PIN CYL SINGLE LEVER LEVER LOCATION RING UPPER LEVER CONN POST HOIST MOUNT LOWER S/ASSY BOLT HEX UNC X 3.50 LG WASHER LOCK SPLIT REG.50 PTD NUT HEX UNC GR 5 PTD BOLT HEX UNC X 1.25 LG GR 5 PTD GREASE NIPPLE.313 X PIN CLEVIS.50 X 2.25 LG COTTER PIN.187 X 2.00 PLAIN COTTER PIN.109 X 1.50 PLATED 1
Oil Filter Cart. Quad Filtration OPERATOR S MANUAL & PARTS LIST
Oil Filter Cart Quad Filtration OPERATOR S MANUAL & PARTS LIST 1 481 Panet Road Winnipeg, MB R3C 2W7 OIL FILTER CART ITEM # 8306920 GENERAL INFORMATION Congratulations on your purchase of this Princess
More informationLR-416, LR-165, LR-25 INSTALLATION AND OPERATION MANUAL
RUGBY MANUFACTURING CO. INDUSTRIAL PARK 515 1st STREET NE RUGBY, NORTH DAKOTA 58368 03 5753 LR-416, LR-165, LR-25 INSTALLATION AND OPERATION MANUAL To Be Filled In By Installer Hoist Installed: Hoist Serial
More informationPAGE DESCRIPTION REF. NO.
TABLE OF CONTENTS VC 628 / 5520 / 6620 MANUAL PAGE DESCRIPTION REF. NO. 1 READ THIS FIRST... 416756 2 IMPORTANT WARNING... 416086 3 WARNING AND CAUTION DECAL LOCATIONS... 416128 4 DECAL DRAWINGS & LIST...
More informationTABLE OF CONTENTS VC 620 / 628 / 5520 / 6620 / 6628 MANUAL TABLE OF CONTENTS F VC VC 6628 PAGE DESCRIPTION REF. NO.
TABLE OF CONTENTS VC 620 / 628 / 5520 / 6620 / 6628 MANUAL PAGE DESCRIPTION REF. NO. 1 READ THIS FIRST... 416733 2 IMPORTANT WARNING... 416086 3 WARNING AND CAUTION DECALS... 416128 4 VC 620 CAPACITIES...
More informationPAGE DESCRIPTION REF. NO.
TABLE OF CONTENTS VC 416 / 516 MANUAL PAGE DESCRIPTION REF. NO. 1 READ THIS FIRST... 416723 2 IMPORTANT WARNING... 416272 3 BODY PROP AND WARNING / CAUTION DECALS... 416288 4 DECAL LOCATIONS... 416128
More informationPAGE DESCRIPTION REF. NO.
TABLE OF CONTENTS VC 416 / 516 MANUAL PAGE DESCRIPTION REF. NO. 1 READ THIS FIRST... 416723 2 IMPORTANT WARNING... 416272 3 BODY PROP AND WARNING / CAUTION DECALS... 416288 4 DECAL LOCATIONS... 416128
More informationPAGE DESCRIPTION REF. NO.
TABLE OF CONTENTS VC 620 MANUAL PAGE DESCRIPTION REF. NO. 1 READ THIS FIRST... 416733 2 IMPORTANT WARNING... 416086 3 WARNING AND CAUTION DECAL LOCATIONS... 416128 4 DECAL DRAWINGS & LIST... 628820 5 VC
More informationTABLE OF CONTENTS VC 620 W/ LINKAGE BODY PROP MANUAL TABLE OF CONTENTS VC 620 W/ LINK. PROP
TABLE OF CONTENTS VC 620 W/ LINKAGE BODY PROP MANUAL PAGE DESCRIPTION REF. NO. 1 READ THIS FIRST... 416733 2 IMPORTANT WARNING...416086 3 WARNING AND CAUTION DECAL LOCATIONS... 416850 4 DECAL DRAWINGS
More informationMODEL TB-8, TB-10, TB-12, & TB-14 TRAILER HOIST INSTALLATION AND OPERATION MANUAL
TRUCK BODIES & EQUIPMENT INTERNATIONAL, Inc. Website: www.tbei.com E-mail: sales@tbei.com Phone: 1-800-869-9162 1-800-533-0494 090001 MODEL TB-8, TB-10, TB-12, & TB-14 TRAILER HOIST INSTALLATION AND OPERATION
More informationLR-26B, LR-27B, LR-28A, or LR-623 INSTALLATION AND OWNER'S MANUAL
INDUSTRIAL PARK 515 1ST STREET NORTH EAST RUGBY, ND 58368 03 5804 LR-26B, LR-27B, LR-28A, or LR-623 INSTALLATION AND OWNER'S MANUAL Hoist Installed: Hoist Serial #: To Be Filled In By Installer Pump Installation
More informationHR-520 HOIST. Installation & Operation Manual. To Be Filled In By Installer. Pump Installation And Operation Manual#: In Service Date: Dealer:
Website: www.tbei.com E-mail: sales@tbei.com Phone: 1-800-869-9162 Rugby 1-800-255-4345 DuraClass 1-800-533-0494 Crysteel HR-520 HOIST Installation & Operation Manual To Be Filled In By Installer Hoist
More informationMARATHON TELESCOPIC HOIST
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S MARATHON TELESCOPIC HOIST this manual must be included with the vehicle after completing the installation. Web Site E-Mail Phone (507) 726-2728 www.crysteel.com
More informationLR-3510 Install and Operation Manual
RUGBY MANUFACTURING CO. INDUSTRIAL PARK 515 1st St. NE. RUGBY, NORTH DAKOTA 58368 03 6048 Install and Operation Manual LATEST EDITION: 1st (January 4, 2001) FIRST EDITION: January 4, 2001 Page 2 of 9 WARNINGS:
More informationHR-540/HR-550 HOIST Installation & Operation Manual
Website: www.tbei.com E-mail: sales@tbei.com Phone: 1-800-869-9162 Rugby 1-800-255-4345 DuraClass 1-800-533-0494 Crysteel HR-540/HR-550 HOIST Installation & Operation Manual To Be Filled In By Installer
More informationPAGE DESCRIPTION REF. NO.
TABLE OF CONTENTS VC 416 / 516 MANUAL PAGE DESCRIPTION REF. NO. 1 READ THIS FIRST... 416733 2 IMPORTANT WARNING... 416272 3 BODY PROP AND WARNING / CAUTION DECALS... 416288 4 DECAL LOCATIONS... 416128
More informationRugby Manufacturing SR-Series Hoist Manual. Preface INSTALLATION & OPERATION MANUAL
Preface INSTALLATION & OPERATION MANUAL INTRODUCTION IMPORTANT!! Read this manual thoroughly prior to installation and operation. This manual outlines the installation and operation of an SR-series hoist
More informationOwner s Manual TC-515 with Reversed Hoist, Sub-Frame, Deck, & Hitch Mount
Proudly built in the USA Owner s Manual TC-55 with Reversed Hoist, Sub-Frame, Deck, & Hitch Mount TruckCraft Corporation Chambersburg, PA -800-755-87 Copyright c 0 www.truckcraft.com TruckCraft Corporation
More informationRugby Manufacturing TB-8/10/12/14 Hoist Manual. Preface INSTALLATION & OPERATION MANUAL
Preface INSTALLATION & OPERATION MANUAL INTRODUCTION IMPORTANT!! Read this manual thoroughly prior to installation and operation. This manual outlines the installation and operation of a TB-Series hoist
More informationOperating & Maintenance
TL & C SERIES Operating & Maintenance A B C D E F TO RAISE HOIST 1. Start Engine in neutral 2. Depress the clutch and engage the P.T.O. 3. Release the clutch and open the hydraulic valve. If the pump squeals,
More informationSERVICE INSTRUCTIONS D TON
1120 SOUTH CRYSTAL AVE * BENTON HARBOR MI PH: 269-925-7777 FAX: 269-925-6656 SERVICE INSTRUCTIONS D-51223 4 TON TO ASSEMBLE: 1. Check the handle set screw for tightness. CUSTOMER PRE-USE INSTRUCTIONS THE
More informationCHAMPION. Hoist and EquipmentGodwinTheGrouOperation & Installation poperation Manual 5530DM UNDERBODY HOIST
CHAMPION GodwinTheGrouOperation & Installation poperation Manual 5530DM UNDERBODY HOIST CHAMPION HOIST & EQUIPMENT 200 Champion Drive Dunn, N.C. 28334 800-649-4995 3/2009 2 UNDERBODY HOIST Table of Contents
More informationCHAMPION. Hoist and Equipment Dunn, North Carolin, U.S.A. AN AFFILIATE OF 200 CHAMPION DRIVE DUNN, N.C (910) FAX: (910)
CHAMPION Hoist and Equipment Dunn, North Carolin, U.S.A. AN AFFILIATE OF 200 CHAMPION DRIVE DUNN, N.C. 28334 (910) 897-4995 FAX: (910) 897-7306 TRAILER CONVERSION HOIST WARRANTY Champion Hoist and Equipment
More informationC-10 INSTALLATION INSTRUCTIONS
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: 30,000 LBS. TRAILER WEIGHT & 6,000 LBS. TONGUE WEIGHT. ***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.*** Parts List ITEM
More informationWebsite: ELIMINATOR MD. (701) (800)
Website: www.tbei.com E-mail: sales@tbei.com ELIMINATOR MD www.rugbymfg.com sales@rugbymfg.com (701) 776-5722 (800) 533-0494 1228633 1 DATE PURCHASED BODY SERIAL NUMBER HOIST SERIAL NUMBER CYLINDER SERIAL
More informationGeneral Information. Assembly Instructions. Before You Start. Marker Assembly. Assembly Instructions S and S Marker Option
Great Plains Mfg., Inc. Assembly Instructions! Used with: 3000-3S 30 3-Section Folding Drill 2600-2S 26 2-Section Folding Drill Before You Start 3000-3S and 2600-2S Marker Option When you see this symbol,
More informationProudly built in the USA. Owner s Manual TC-502 Metro Hoist, Sub-Frame, and Dump Body
Proudly built in the USA Owner s Manual TC-50 Metro Hoist, Sub-Frame, and Dump Body TruckCraft Corporation Chambersburg, PA -00-755-67 Copyright c 009 TruckCraft Corporation Rev. - - /7/09 I5-059 TRUCKCRAFT
More informationMODEL LR-2066 & LR-2866A HOIST INSTALLATION AND OPERATION MANUAL
TRUCK BODIES & EQUIPMENT INTERNATIONAL, Inc. Website: www.rugbymfg.com E-mail: sales@rugbymfg.com Phone: 1-800-869-9162 03 5839 MODEL LR-2066 & LR-2866A HOIST INSTALLATION AND OPERATION MANUAL Hoist Serial
More informationHEIDTS SUPERIDE IRS INSTALLATION INSTRUCTIONS INDEPENDENT REAR SUSPENSION
HEIDTS SUPERIDE IRS INDEPENDENT REAR SUSPENSION Please read these instructions completely before starting your installation. Remember the basic rule for a successful installation: Measure Twice, Weld Once.
More information16K Reese Revolution. Operating Instructions
Operating Instructions DEALER: (1) Provide this Manual to end user END USER: (1) Read and follow this Manual every time you use Sidewinder. (2) Save this Manual for Future Reference. PIN BOX SHOWN ASSEMBLED
More informationAN AFFILIATE OF. The Godwin Group 200 CHAMPION DRIVE DUNN, N.C (910) FAX: (910) CONVERSION HOIST
CHAMPION Hoist and Equipment AN AFFILIATE OF The Godwin Group 200 CHAMPION DRIVE DUNN, N.C. 28334 (910) 897-4995 FAX: (910) 897-7306 CONVERSION HOIST Operation & Installation Manual Notice: This manual
More informationZJ 4-Link Rear Long Arm Upgrade Instructions
Parts Checklist: Instructions Iron Rock Off Road logo decal (Qty: 1) Rock-Link decal 13287 (2) ironrockoffroad.com Decal (1) Crossmember 99118 (1) 3/16 steel brake line tubing (5 feet) Coil spring retainer
More informationRL-G70 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to
RL-G70 PARTS LIST # 102693I USE THIS PARTS LIST FOR: Hoist Serial Number 6597 to For older hoists use the following: Parts List No. 102692H for Serial Number 2485 to 6596 IF YOUR HOIST DOES NOT FALL WITHIN
More informationPage 1. 2/18 HJ26180 Rev 3
Page 1 2/18 HJ26180 Rev 3 Introduction Thank you for purchasing a Demco Recon hitch. We feel you have made a wise choice and hope you are completely satisfied with your new piece of equipment. Please consult
More informationCRYSTEEL S HOIST. this manual must be included with the vehicle after completing the installation.
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S STINGRAY HOIST this manual must be included with the vehicle after completing the installation. Web Site E-Mail Phone (507) 726-2728 www.crysteel.com
More informationQuiet Collector. Model No & Up
FORM NO. -8GB Rev A Quiet Collector Model No. 795-890000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information about your safety and the safety
More informationLOADER MOUNTING KIT 5211 LOADER JOHN DEERE TRACTORS
ASSEMBLY MANUAL 2-6976 Keep with Operators Manual LOADER MOUNTING KIT 5211 LOADER JOHN DEERE TRACTORS MODEL 2WD FWA ROPS CAB JD 6110, 6120 X X X X JD 6210, 6220 X X X X JD 610, 620 X X X X JD 610, 620
More information! CAUTION! ! WARNING!
Assembly Instructions! 24- and 30-Foot, No-Till Flat Fold Marker Option Used with: 2N-2410 and 2N-3010 Drills 2N-2420 and 2N-3020 Drills When you see this symbol, the subsequent instructions and warnings
More informationRide Management System
XR 1800 Ride Management System Parts Identification READ these instructions before placing unit in service KEEP these and other materials delivered with the unit in a binder near the machine for ease of
More information400 SERIES HYDRA-LIFT KARRIERS
OPERATOR S MANUAL FOR HYDRA-LIFT DRUM KARRIERS - Serial # 0802 to (MMYY) The letter A in the model number indicates that the unit is for 55 gallon standard steel drum ( 22½ diameter). Model Dispensing
More informationOWNERS MANUAL GM C4500/C5500 4X4 DANA MODEL S135 REAR AXLE 2005-NEWER MODELS LINK MFG. PART NO. 8M PROUDLY INSTALLED BY : COMPANY :
OWNERS MANUAL GM C4500/C5500 4X4 DANA MODEL S135 REAR AXLE 2005-NEWER MODELS LINK MFG. PART NO. 8M000060 Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4874 Fax (712) 722-4876
More informationPage 1. 11/17 HJ26201 Rev 1
Page 1 11/17 HJ26201 Rev 1 Thank you for purchasing a Demco Recon hitch. We feel you have made a wise choice and hope you are completely satisfied with your new piece of equipment. Unless otherwise specified,
More informationDIRECT MOUNT PUMP INSTALLATION AND OPERATION MANUAL (Valve/Reservoir: W15-8CR-21 QT Pump: GP2041)
TRUCK BODIES & EQUIPMENT INTERNATIONAL, Inc. Website: www.tbei.com E-mail: sales@tbei.com Phone: 1-800-869-9162 Rugby 1-800-533-0494 Crysteel 1-800-255-4345 Heil DIRECT MOUNT PUMP INSTALLATION AND OPERATION
More informationInstruction Manual 30K - Fifth Wheel Hitch Part Number 30054
You can take it with you. ELKHART, IN., OAKVILLE, ONT. Instruction Manual 30K - Fifth Wheel Hitch Part Number 30054 DEALER/INSTALLER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching
More information1. GENERAL INFORMATION WARRANTY- PARTS - SERVICE SERIAL # ITEM # Printed in Canada Issue Date: October 2010 Revision 12
TABLE OF CONTENTS SECTION PAGE 1 GENERAL INFORMATION 2 2 SAFETY GUIDELINES 3 3 OPERATION 4 3.1 How the Compressor Works 4 3.1.1 Components 4 3.1.2 Controls 5 3.1.3 Inlet Air System 6 3.1.4 Discharge System
More informationInstallation Instructions READ THOROUGHLY BEFORE BEGINNING Signature Series Rail Kit Dodge Ram Trucks-all, including Mega-cabs
INDEX Failure to follow all of these instructions may result in death or serious injury!. GUIDELINES FOR MATCHING TOW VEHICLE AND TRAILER. Pages -. DRILLED AND BOLTED INSTALLATION FIGURE. Page 4. NO-DRILL,
More informationCRYSTEEL S. this manual must be included with the vehicle after completing the installation.
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S POWER TAILGATE this manual must be included with the vehicle after completing the installation. Web Site E-Mail Phone (507) 726-2728 www.crysteel.com
More informationOWNERS MANUAL. GMC C K AND 19K GVW CHASSIS CAB 2004-NEWER MODELS (Link Part No. 8M000050) PROUDLY INSTALLED BY : COMPANY : INSTALLER SIGNATURE :
OWNERS MANUAL GMC C5500 15K AND 19K GVW CHASSIS CAB 2004-NEWER MODELS (Link Part No. 8M000050) Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4868 Fax (712) 722-4779 QUESTIONS?
More informationRIGID LIFT INSTALLATION & OPERATION MANUAL MODELS: RL-B10 THRU RL-L125
RIGID LIFT INSTALLATION & OPERATION MANUAL MODELS: RL-B10 THRU RL-L125 THIS MANUAL IS TO BE USED IN CONJUNCTION WITH THE APPROPRIATE PUMP INSTALLATION MANUAL AND HOIST PARTS LIST. IMPORTANT FAILURE TO
More informationOWNERS MANUAL GM C4500/C5500 DANA MODEL S135 REAR AXLE 2003-NEWER MODELS LINK MFG. PART NO. 8M PROUDLY INSTALLED BY : COMPANY :
OWNERS MANUAL GM C4500/C5500 DANA MODEL S135 REAR AXLE 2003-NEWER MODELS LINK MFG. PART NO. 8M000030 Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4874 Fax (712) 722-4876 QUESTIONS?
More informationInstallation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis, IN
More informationDUMP BODY SPREADERS INSTALLATION INSTRUCTIONS
DUMP BODY SPREADERS INSTALLATION INSTRUCTIONS (Includes PS350 & PS400) EFFECTIVE 09/2011 Revision A 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com
More informationHEIDTS RF-110. INSTALLATION INSTRUCTIONS Fairlane Comet Rear 4-Link
HEIDTS RF-110 INSTALLATION INSTRUCTIONS 66-67 Fairlane 66-67 Comet Rear 4-Link Please read these instructions completely before starting your installation. Remember the basic rule for a successful installation:
More informationAerolite Wraparound Bulkhead: DOT Models
OWNER'S MANUAL Installation Instructions and Parts List READ THIS ENTIRE MANUAL PRIOR TO INSTALLATION Aero Industries, Inc. Attention Dealers: Please give these instructions to the customer when the product
More informationMOREHOUSE INSTRUMENT COMPANY, INC. 60,000 LBS CAPACITY AIRCRAFT PART NUMBER SCALE S FORCE CALIBRATION PRESS PART NO.
INDEX 1. GENERAL SPECIFICATION AND DRAWING 804000-03... 2 2. ASSEMBLY INSTRUCTIONS... 5 3. OPERATING INSTRUCTIONS... 6 4. MAINTENANCE INSTRUCTIONS... 7 5. CERTIFICATE OF CAPACITY LOAD TEST AND OVERLOAD...
More informationINSTALLATION INSTRUCTIONS MOUNTING KIT COMMERCIAL TRUCK FOR 34 OUTSIDE FRAME WIDTH ONLY. Front of vehicle
INSTALLATION INSTRUCTIONS MOUNTING KIT COMMERCIAL TRUCK FOR 34 OUTSIDE FRAME WIDTH ONLY DEALER/INSTALLER: (1) Provide this Manual to end user. END USER: (1) Save this Manual for future reference. (2) Pass
More informationInstallation Instructions
PIN BOX SHOWN ASSEMBLED Equipment Required: Fastener Kit: ST100F Wrenches: 15/16, 1 1/8 Drill Bits: Not Required White Lithium Grease, Torque Wrench Installation Instructions DEALER/INSTALLER: (1) Provide
More informationQuiet Collector. Model No & Up
FORM NO. -0 Quiet Collector Model No. 79-990000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information about your safety and the safety of others.
More information2/18 HJ26076 Rev 7 1
1 2/18 HJ26076 Rev 7 Introduction Thank you for purchasing a Demco Hijacker hitch. We feel you have made a wise choice and hope you are completely satisfied with your new piece of equipment. WARRANTY POLICY,
More informationIllustrated Parts List I HDC 1000 ( ) Repair Parts Manual
Illustrated Parts List 2008-01 I0807212 531 03 10-07 HDC 1000 (45-01714-669) Repair Parts Manual owners manual Model No. 45-01714-669 10 CU. FT. CART CAUTION: Read Rules for Safe Operation and Instructions
More informationDODGE SuperRail Mounting Kit #0848
DODGE SuperRail Mounting Kit #0848 #1200 Super 5 th (16K) #0800 Super 5 th (20.5K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 16,000 lbs. 4,000 lbs. Gross Trailer Weight (Maximum)
More informationINSTALLATION INSTRUCTIONS 88029
INSTALLATION INSTRUCTIONS 88029 FOR SUSPENSION SYSTEMS RS6503: JEEP WRANGLER (TJ) READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION REV F IMPORTANT NOTES! WARNING: This
More informationINSTRUCTION MANUAL TITAN 16K - Fifth Wheel Hitch Plymouth MI
You can take it with you. INSTRUCTION MANUAL TITAN 16K - Fifth Wheel Hitch Plymouth MI Product No. 30866 DEALER/INSTALLER: END USER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching
More informationOWNER S GUIDE 8A DURALIFT II 13,200 LB. CAPACITY. Link Mfg. Ltd th St. N.E. Sioux Center, IA USA
OWNER S GUIDE 8A000715 DURALIFT II 13,200 LB. CAPACITY Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 www.linkmfg.com QUESTIONS? CALL CUSTOMER SERVICE 1-800-222-6283 DEALER / INSTALLER:
More informationSTOP 40" FRONT MOUNT TINE DETHATCHER. Owner's Manual. Model No Safety Assembly Operation Maintenance Parts
Owner's Manual STOP 40" FRONT MOUNT TINE DETHATCHER Model No. 486.24312 DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 CAUTION: Before using this product, read this
More informationRL-H80 PARTS LIST # H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to
RL-H80 PARTS LIST # 102837H USE THIS PARTS LIST FOR: Hoist Serial Number 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
More informationGRAIN CART RETROFIT BOLT-ON TYPE HITCH SCALE SYSTEM
GRAIN CART RETROFIT BOLT-ON TYPE HITCH SCALE SYSTEM Instructions This manual is copyrighted by Scale-Tec. Redistribution or copy of this manual or portions of this manual must be approved through Scale-Tec
More informationFinishing Mower Estate 72
Finishing Mower Estate 72 Owners/Operators Manual & Spare Parts List Issue Date: October 2011 1 Introduction Your FIELDMASTER Estate 72 Finishing Mower has been designed to do a range of work to your satisfaction.
More informationA40 ARTICULATING CRANE MOUNTING AND INSTALLATION INSTRUCTIONS Manual No Rev. 9/2/2003
A40 ARTICULATING CRANE MOUNTING AND INSTALLATION INSTRUCTIONS Manual No. 407900001 Rev. 9/2/2003 Mailing Address: P.O. Box 580697 Tulsa, OK 74158-0697 Physical Address: Phone (918) 836-0463 4707 N. Mingo
More informationPart # Chevy Level 2 CoilOver Suspension Package Two Piece Frame
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11030210 55-57 Chevy Level 2 CoilOver Suspension Package Two Piece Frame Front Components: 1 11013510
More informationINSTALLATION INSTRUCTIONS MOUNTING KIT GENERAL MOTORS Chevrolet Silverado Sierra, GMC 3500HD; Silverado
INSTALLATION INSTRUCTIONS MOUNTING KIT GENERAL MOTORS 2001-04 Chevrolet Silverado Sierra, GMC 3500HD; 99-2000 Silverado DEALER/INSTALLER: (1) Provide this Manual to end user. END USER: (1) Save this Manual
More informationINSTALLATION INSTRUCTIONS MOUNTING KIT GENERAL MOTORS 88-98; Classic; 1500/2500/3500 (6 and 8 BEDS)
DEALER/INSTALLER: (1) Provide this Manual to end user. INSTALLATION INSTRUCTIONS MOUNTING KIT GENERAL MOTORS 88-98; 99 2000 Classic; 1500/2500/3500 (6 and 8 BEDS) END USER: (1) Save this Manual for future
More informationSTOP. 44" High Speed Sweeper. Operator's Manual. Model No Safety Assembly Operation Maintenance Parts
Operator's Manual STOP 44" High Speed Sweeper Model No. 486.029 DO NOT RETURN TO STORE For Missing Parts or Assembly Questions Call 1-866-576-8388 CAUTION: Before using this product, read this manual and
More informationINSTRUCTION MANUAL R16 - Fifth Wheel Hitch
You can take it with you. INSTRUCTION MANUAL R16 - Fifth Wheel Hitch Product No. 30866 DEALER/INSTALLER: END USER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching and unhitching
More information4222V2 22 cu ft LAWN SWEEPER READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT REV A 11/17
4222V2 22 cu ft LAWN SWEEPER U.S. Patent No. 7,610,646 READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT 6004082 - REV A 11/17 Safety Rules This is the safety alert
More informationDodge SuperRail Mounting Kit #3516
1995-2002 Dodge SuperRail Mounting Kit #3516 #3600 SuperGlide (24K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 24,000 lbs. 6,000 lbs. Installation Instructions SPECIFICATIONS
More informationPremium Supply. Direct Push. Models PCK-3530-DP PCK DP PCK-530-DP. Operator s Manual and Installation Instructions
Direct Push Models PCK-3530-DP PCK-3530-2DP PCK-530-DP Operator s Manual and Installation Instructions Premium Supply 2038 West Interstate 30 866-934-0777 Proud members of: and June 20, 2018 Table of Contents
More informationINSTRUCTION MANUAL 16K - Fifth Wheel Hitch
You can take it with you. INSTRUCTION MANUAL 16K - Fifth Wheel Hitch Product No. 30047 DEALER/INSTALLER: END USER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching and unhitching
More informationINSTALLATION INSTRUCTIONS MOUNTING KIT GENERAL MOTORS Chevrolet Silverado/GMC Sierra 2500HD & 3500HD
INSTALLATION INSTRUCTIONS MOUNTING KIT GENERAL MOTORS 2001-2006 Chevrolet Silverado/GMC Sierra 2500HD & 3500HD DEALER/INSTALLER: (1) Provide this Manual to end user. END USER: (1) Save this Manual for
More informationINSTRUCTION MANUAL 22K - Fifth Wheel Hitch
You can take it with you. INSTRUCTION MANUAL 22K - Fifth Wheel Hitch Product No. 30033 DEALER/INSTALLER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching and unhitching procedures
More informationKubota Rear Discharge Mowers 1.3m
Operating instructions and parts manual for Kubota Rear Discharge Mowers 1.3m (For G2160 Tractors) autoguide equipment Heddington, Nr Calne, Wiltshire, SN11 0PS Telephone: +44 (0) 1380 850885 Fax: +44
More informationRugby Manufacturing Direct Mount Unit Manual
Preface INSTALLATION & OPERATION MANUAL INTRODUCTION IMPORTANT!! Read this manual thoroughly prior to installation and operation. This manual outlines the installation and operation of a Direct Mount unit
More information4200 & 6200 Owner s Manual & Parts Book
00 & 00 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model PN: - Dealer Date --0 Description Page To The Owner & Maintenance Safety Precautions & Torque Specifications Skid
More informationInstruction Manual 15K - Fifth Wheel Hitch Part Number 6030 & 6031
DEALER/INSTALLER: (1) Provide this Manual to end user. (2) Physically demonstrate hitching and unhitching procedures in this Manual to end user. (3) Have end user demonstrate that he/she understands procedures.
More informationDODGE DAKOTA 3 BODY LIFT INSTALLATION INSTRUCTIONS KIT # 60153
DODGE DAKOTA 3 BODY LIFT INSTALLATION INSTRUCTIONS 2003-04 KIT # 60153 Installation of a Performance Automotive Group body lift kit will change the vehicle s center of gravity and handling characteristics
More informationFolding Ball Gooseneck
Folding Ball Gooseneck Instruction manual Installer: Read and understand this manual. Fully instruct and demonstrate the operation of this gooseneck hitch to the end user. Include the importance of observing
More informationRL-F60 PARTS LIST # I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to
RL-F60 PARTS LIST # 102692I USE THIS PARTS LIST FOR: Hoist Serial Number 6745 to For older hoists use the following: Parts List No. 102692H for Serial Number 2640 to 6744 IF YOUR HOIST DOES NOT FALL WITHIN
More informationELIMINATOR LP. Operation Manual. To Be Filled In By Installer. Body Serial #: In Service Date: Dealer: Address: City, State, ZIP:
Website: www.tbei.com E-mail: sales@tbei.com Phone: 1-800-869-9162 Rugby 1-800-255-4345 DuraClass 1-800-533-0494 Crysteel ELIMINATOR LP Operation Manual To Be Filled In By Installer Body Serial #: In Service
More informationINSTALLATION INSTRUCTIONS READ THOROUGHLY BEFORE BEGINNING
Catalog No. 6320 INSTALLATION INSTRUCTIONS READ THOROUGHLY BEFORE BEGINNING 6320 RAIL KIT - 1988 through 2000 Chevrolet/GMC Pickup w/6 ft. bed, 1999 Chevrolet C/K LS and GMC Sierra Classic w/6 ft. bed
More information16K Reese Revolution. Operating Instructions
Operating Instructions Operating Instructions DEALER: (1) Provide this Manual to end user END USER: (1) Read and follow this Manual every time you use Sidewinder. (2) Save this Manual for Future Reference.
More information3651 N Highway 89 Chino Valley, AZ (928)
3651 N Highway 89 Chino Valley, AZ 86323 (928) 636-7080 CHEVY TRUCK 2 & 3 BODY LIFT KIT INSTALLATION INSTRUCTIONS 1973-1987 STEPSIDE PICKUP KIT# 512 (2 ), 513 (3 ) 1973-1987 FLEETSIDE PICKUP KIT# 522 (2
More informationINSTALLATION INSTRUCTIONS MOUNTING KIT Toyota Tundra 8 BEDS
DEALER/INSTALLER: INSTALLATION INSTRUCTIONS MOUNTING KIT Toyota Tundra 8 BEDS (1) Provide this Manual to end user. (2) Physically demonstrate procedures in this Manual to end user. (3) Have end user demonstrate
More informationInstallation Instructions
Instructions Created by an: 1986-1995 Toyota Pickup 4Runner Hilux Front Ball Joint Spacer Kit - 2.5" 64mm Lift by Low Range Off-Road (SKU# TSP-BJS-1.5 & TSP-BJS-1.5-W/Shocks) Installation Instructions
More information500kg HYDRAULIC TABLE LIFT
Product Code: 6007T OWNER S MANUAL PRODUCT CODE: 6007T 500kg HYDRAULIC TABLE LIFT Working Load Limit 500kg Maximum Height 1575mm Minimum Height 440mm Table Dimensions 1010x520mm Wheel Diameter 150mm Made
More information1002 Wayne Avenue Chambersburg, PA Fax: DI-100 OWNER S MANUAL. General Information Instructions Maintenance
1002 Wayne Avenue Chambersburg, PA 17201 717.261.0922 Fax: 717.264.5581 DI-100 OWNER S MANUAL General Information Instructions Maintenance TABLE OF CONTENTS Installation Instructions... 4-5 Installation
More informationModel: D5H TRACK-TYPE TRACTOR 8RC02018 Configuration: D5H & D5H LGP TRACTOR / POWER SHIFT / 8RC (MACHINE) POWERED BY 3304 ENGINE
Model: D5H TRACK-TYPE TRACTOR 8RC02018 Configuration: D5H & D5H LGP TRACTOR / POWER SHIFT / 8RC00001-03999 (MACHINE) POWERED BY 3304 ENGINE Disassembly and Assembly D5H AND D5H SERIES II TRACTORS POWER
More information1300 Dozer Owner s Manual & Parts Book
300 Dozer Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 3-2472 0--2008 Contents Description Page To The Owner 2 Maintenance & Caution 2 Safety Precautions
More informationSerial Number Range. Jib-Hoist. from SN Part No
Serial Number Range Jib-Hoist from SN 56306 Part No. 645045 Rev B May 2010 2 Jib-Hoist Part No. 645045 How to Read Your Serial Number Part No. 645045 Jib-Hoist 3 Table of Contents This manual is updated
More informationWARNING!! C-659 SUBKIT FIGURE 4
'0-'0 DODGE / TON TRUCKS '03-' DODGE 3/ & TON TRUCKS (WILL FIT /, 3/ & TON MEGA CAB SHORT BED) WARNING!! BRAKE, FUEL, AND ELECTRICAL LINES MAY NEED TO BE LOOSENED OR REPOSITIONED TO PROVIDE CLEARANCE FOR
More informationSINGLE PIVOT HOOK HOIST Tel:
SINGLE PIVOT HOOK HOIST Tel: 800.285.0666 sales@wastequip.com www.galbreathproducts.com» 9,000 to 30,000 lb. capacity» Container lengths from 6 to 20 Galbreath single pivot hook hoists feature a universal
More informationProudly built in the USA. Owner smanual TC-420 withdropsides Hoist, Sub-Frame, and Dump Body
Proudly built in the US Owner smanual TC-0 withdropsides Hoist, Sub-Frame, and Dump Body TruckCraft Corporation Chambersburg, P -00-- Copyright c 00 TruckCraft Corporation Rev. - - //0 I-0 TRUCKCRFT CORPORTION
More information