LOC 400 Drilling Rig

Transcription

1

2 TABLE OF CONTENTS 1 DESCRIPTION INTRODUCTION CASING WHILE DRILLING CONTAINERIZED DESIGN AUTOMATED DRILLING INTEGRATED DESIGN OFFLINE BOP TESTING EMERGENCY BACKUP SYSTEMS ENERGY EFFICIENT SERVICE CRANE 8 2 SPECIFICATIONS GENERAL HOISTING ROTATING EQUIPMENT PIPE HANDLING MUD SYSTEM WELL CONTROL POWER OPTIONAL ITEMS 11 Huisman Equipment BV Admiraal Trompstraat HH Schiedam The Netherlands Harbour no. 561 Phone: sales@huisman-nl.com LOC 400 Revision 1 2

3 1 DESCRIPTION 1.1 Introduction The oil and gas exploration and production industry is being challenged to exploit smaller pockets of recoverable reserves at more remote locations. At the same time, operators are required to meet safety targets and environmental regulations in a cost constrained and competitive environment. The LOC 250, an innovative new rig concept, was introduced to the market in The LOC 250 Land and Offshore Containerized 250t drilling rig - was designed to take advantage of emerging Casing While Drilling technology in order to reduce the costs as well as the environmental impact of drilling a well. The demand for faster operation, more flexibility, and deeper wells triggered the development of the LOC 250 s successor: the LOC 400. The LOC 400 is Huisman s drilling solution designed to meet today s challenges. Main advantages of the LOC 400 Total solution for Casing While Drilling AND Conventional drilling Containerized design Automation Integrated Design System is proven in a working environment Other benefits include: o 6 mt service crane with man riding basket Safety o Power unit designed to work with gen-sets or local grid Efficiency o Offline BOP testing Efficiency LOC 400 on site in Werkendam, NL LOC 400 Revision 1 3

4 1.2 Casing While Drilling Casing While Drilling (CWD) technology enables the drilling of wells using standard oilfield casing in stead of drill pipe. This enables an operator to simultaneously drill and case a well. Drill bits and other tools can be lowered on a wire line inside the casing to the bottom of the hole where they can be latched onto the last joint of casing while mud circulation continues. Retrieval of drill bits and tools occurs in the same way. The use of modern CWD drillable bits and drill through technology is also possible. The CWD process eliminates tripping and its associated risks. A top drive system is used to rotate the casing, which remains in the hole at all times. The casing remains on bottom, at all times and is eventually cemented in place once the casing depth is reached. Using CWD can often eliminate a casing string from the well design. It has been proven that drilling efficiency can be improved by 20 to 50%. Casing Drilling Down Hole Tools External and Internal Views CWD Drillable bit Casing While Drilling Advantages: Less tripping: o Reduced flat time o Reduced risks of kicks and blow-outs Efficiency Safer working conditions Casing is always on bottom o Reduced risks of kicks and blow-outs o Improved well bore stability Safer working conditions Easier to drill through difficult and unstable formations Improved mud circulation leading to a reduction in the required pump power: o Lower noise, o Lower fuel consumption, o Less mud consumption. Efficiency Reduced environmental impact LOC 400 Revision 1 4

5 1.3 Containerized Design Two of the most important features of the LOC 400 are its compact size and the possibility to break down the entire rig into 18 modules (26 including loose items.) Within 30 hours including limited transportation time, a crew can demobilize the entire rig and rebuild it at another location. As the standard ISO containers can be transported quickly and economically by any container ship, train, or truck, the LOC 400 can be used to drill wells anywhere in the world. Transportation costs between worldwide locations are no longer an issue. Its modular design enables the LOC 400 to be used in various ways: on land, on skid beams, and offshore on platforms, jack-ups and barges. Offshore, the LOC 400 can be fitted compactly onto x-y beams enabling two dimensional movement of the rig over the platform s array of wells. Due to the modular design, only the essential drilling elements of the rig need to be set up on the skidding system, limiting the weight on the platform. Containerized Design Advantages: Standard ISO container design o 19 x 40 containers and 7 x 20 containers o Easy, cheap, and quick worldwide transportation o No special road permits Efficiency Modular design allows for a flexible footprint o Minimal foot print o Containers can be stacked Efficiency, Reduced environmental impact LOC 400 Revision 1 5

6 1.4 Automated Drilling Pipe Handling The LOC 400 is equipped with an automatic pipe handler enabling highly efficient and safe handling of both casing and drill pipe. The pipe handler picks up the tubulars from the horizontal pipe rack and places them vertically directly over the well centre where the top drive takes over. The top drive or the optional power tongs are used to spin in the tubulars and to torque-up the connections. Automated power slips are integrated into the rotary table. The LOC 400 is capable of tripping 35 joints an hour (based on the speed of the pipe handler) which equates to almost 1600 ft/hr of range 3 drill pipe. The entire drilling process is controlled from the driller s cabin, making personnel on the drill floor unnecessary. As casing handling is identical to drill pipe handling, the same team can carry out both tasks. Autodriller The autodriller is used to keep a constant Weight on Bit (WOB) or a constant Standpipe Pressure. The measurement of the hook load is not done at the dead end as on conventional rigs, but in the connection pins of the lower block, eliminating friction and hysteresis in the measured load signal. The control of the drawworks is extremely accurate with exact speed control even down to zero speed without using mechanical brakes. This results in an improved drilling performance. Advantages of Automation: Automated pipe handling and automated power tongs: o Remove people from drill floor o Automated handling of tubulars up to 13 3/8 o Power tongs can automatically find joints Efficiency Safety Autodriller o Can keep constant Weight on Bit or constant Standpipe Pressure o Load measurement on block, not at dead end o Improved drilling performance o Optimized bit performance and life Efficiency LOC 400 Revision 1 6

7 1.5 Integrated Design Most conventional rigs are combinations of components and systems that are developed and maintained by different suppliers. The LOC 400, however, is a fully integrated drilling rig that is offered as one complete package. All components, including the drawworks, top drive, mud pumps, power unit, mud treatment system, pipe handling, and BOP, are tested prior to delivery to ensure trouble free operations. All systems are combined into a fully integrated control and monitoring system. This means full control of all equipment from a single control desk made by one single supplier. A complete Geolograph is also included. The monitoring system is prepared for satellite/linked remote diagnosis, which enables Huisman engineers to help solve customer s specific needs. Advantages: Complete control system from single supplier Equipment outfitted with local backup controls Remote access and troubleshooting Huisman Geolograph included All systems are fully tested and commissioned prior to delivery LOC 400 Revision 1 7

8 1.6 Offline BOP testing To reduce non-productive time, BOP s can be pressure tested offline on a dedicated test stump that also serves as a mouse hole. The control hoses do not have to be disconnected after testing to move the BOP onto the wellhead. The BOP container is used to transfer the BOP from the test stump onto the well head. 1.7 Emergency Backup Systems Even the most reliable systems can encounter interruptions. Thus all vital systems on the rig have a back-up. The drawworks and top drive can be controlled manually from a separate diesel driven hydraulic power unit. This can prevent stuck pipe and can save the well should power be interrupted while drilling. The mud pumps can also be operated manually. This means that even if the PLC system or network is down, the mud pumps can be operated. 1.8 Energy Efficient The LOC 400 has a significantly lower adverse impact on the environment compared with traditional rigs. Drilling a well with the LOC 400 using CWD requires lower pump pressures and flow rates. Two 800hp mud pumps are usually sufficient for most drilling applications. This, along with the reduction in time required for drilling a well, results in significantly lower fuel consumption. The foot print of the LOC, at 1200m 2, is much smaller then the footprint required by a traditional rig of the same capabilities. 1.9 Service Crane A service crane capable of lifting 6 mt (6.6 sht) is mounted on the crown. Any operations or maintenance requiring work above the drill floor can be done using the crane and a man riding basket. The crane can also be used to help lift heavy items to the drill floor and for lifting heavy tubulars. LOC 400 Revision 1 8

9 2 SPECIFICATIONS 2.1 General The modular rig is rated for 20,000 [ft]. The rig consists of 26 ISO containers loads 19 x 40 and 7 x 20 containers. Main power consumers are electrically AC driven. Auxiliary functions are AC and hydraulically driven. General Substructure Height drill floor above ground level 8.0 [m] 26 [ft] Mast Static rated load (API 4F) 360 [mt] 400 [sht] Clear height, drill floor to bottom water table 27.8 [m] 90 [ft] Total height from ground level 38.1 [m] 125 [ft] 8 Stands BHA setback, max. weight of 1 stand 5500 [kg] [lbs] 2.2 Hoisting Hoisting Service crane Maximum capacity, at max. 6 [m] radius 6000 [kg] [lbs] Drawworks with Autodriller Block speed at full load, 12 falls 11 [m/min] 36 [ft/min] Block speed at red. Load, 12 falls 44 [m/min] 144 [ft/min] Block speed at full load, 8 falls 16 [m/min] 54 [ft/min] Block speed at red. load, 8 falls 66 [m/min] 216 [ft/min] Travelling block 6 sheave assembly. Split blocks with room for wire line passage in the centre line. Thread saver cylinders incorporated. Block capacity (under top drive), 12 falls 317 [mt] 350 [sht] Block capacity (under top drive), 8 falls 227 [mt] 250 [sht] 2.3 Rotating Equipment Rotating Equipment Top drive Integrated swivel. Extend Retract function for working over well and mouse hole Link-tilt function for P/U tubulars. Single joint elevators mechanically locked with load Max. capacity (excl. dyn factor) 317 [mt] 350 [sht] Max. torque (Make up) [Nm] [ft*lbs] Max. speed 220 [rpm] External/internal casing drive assemblies and drill pipe drive assembly available Rotary Table Power slips inside the rotary table, a standard API master bushing can be inserted Hang of capacity 317 [mt] 350 [sht] Table opening (slips removed) 953 [mm] 37.5 [inch] Power slips maximum size 508 [mm] 18 5/8 [inch] LOC 400 Revision 1 9

10 2.4 Pipe Handling Pipe Handling Automatic pipe handler - 1 button for complete cycle Max. weight of tubular 3.0 [mt] 3.3 [sht] Max. length of tubular 14.3 [m] 47 [ft] Cycle time (1 complete cycle) ~100 sec Pipe rack Automatic indexing arm incorporated Capacity of 7 casing joints (2 racks) 60 [-] 2.5 Mud System Mud System Active system Huisman design Mud tank capacity (approx.) Mud treatment container 41.3 [m 3 ] 255 [Bbls] Active mud container 54 [m 3 ] 340 [Bbls] Mud mix container 41.3 [m 3 ] 255 [Bbls] Trip tank 3.5 [m 3 ] 22 [Bbls] TOTAL CAPACITY 140 [m 3 ] 872 [Bbls] All tanks (except sand trap) are fitted with electric driven agitators All tanks (except sand trap) are fitted with level transducers 1 Centrifugal degasser 2 Electric driven shakers, MI-SWACO or client specific (additional shakers are optional) 3 centrifugal pumps mud transfer, mud mixing, or charging mud pumps Mud Pumps Standard delivery: 3x Model: Triplex HHF-800, AC driven Independent drive gearbox, lube pump, wash pump Rated power 600 [kw] 800 [HP] Maximum strokes per minute 160 [spm] Strokes [mm] 9 [inch] Liner sizes [mm] 4 6 ¾ [inch] Maximum output pressure (4 liner) 345 [bar] 5000 [psi] Output with nominal speed and maximum pressure (1 mud pump) Number of strokes (approx.) 120 [spm] Liner size [inch] Maximum pressure [Bar] [Psi] Flow [l/min] [Gpm] Output with maximum speed and reduced pressure (1 mud pump) Number of strokes (approx.) 150 [spm] Liner size [inch] Maximum pressure [Bar] [Psi] Flow [l/min] [Gpm] LOC 400 Revision 1 10

11 2.6 Well Control Well Control Blow Out Preventer BOP can be controlled from the drillers cabin, tool pushers office, or from the BOP control unit 8 station BOP control unit included, remote controlled Bore size 13 5/8 [inch] Pressure (single and double rams) 690 [bar] [psi] Pressure (annular) 345 [bar] 5000 [psi] 2.7 Power Rig Power Consumption Electric power system Main consumers (mud pumps, draw works, top drive): electrical inverter controlled Centrifugal pumps, shakers, agitators, BOP control unit, etc.: electrical Required power, standard delivery 2000 [kw] 3737 [HP] Power source 480 [V] 60 [Hz] Hydraulic power system Auxiliary consumers (Rotary table, small cylinders etc.) hydraulic Required electric power for HPU 220 [kw] 300 [HP] Volume tank hydraulic oil 2000 [l] 527 [USG] 2.8 Optional Items Backup and Rig Up system 1 backup mover: Hatz, Type: 4L41C 40 [kw] 54 [HP] Casing while Drilling Package Casing Drive Assemblies Tubular sizes (casing) 4 1/2 [inch] 18 5/8 [inch] Wire line hoist winch Capacity at surface Approx [mt] 16.8 [sht] Hoisting speed at reduced load <= 6 [mt] 70 [m/min] 230 [ft/min] Max. depth below surface Approx [m] [ft] Wireline BOP Bore size 22 [mm] Pressure 345 [bar] 5k [psi] Generators, 2 or 3, Total rated electrical power (PRIME) 3000 [kw] 4000 [HP] Power output 480 [V] 60 [Hz] Power tong, Rogers Oil Tools Minimum pipe size 108 [mm] 4 ¼ [inch] Maximum pipe size 184 [mm] 7 ¼ [inch] Maximum torque [Nm] [ft*lbs] Vertical stroke 800 [mm] 31.5 [inch] Reserve mud tanks Mud tank capacity (approx.) Reserve mud container 42 [m3] 264 [Bbls] For more information or options, contact Huisman. LOC 400 Revision 1 11

12 Huisman Equipment BV Admiraal Trompstraat HH Schiedam The Netherlands Harbour no. 561 Phone: sales@huisman-nl.com