Master Edition Truck Body Pricing, Options & Parts. DownEaster 120 Old Lisbon RD. PH (207) Topsham, ME Fax (207)

Transcription

1 Truck Body Pricing, Options & Parts Master Edition 2017 DownEaster 120 Old Lisbon RD. PH (207) Topsham, ME Fax (207) Distributed by: or us to order: PRINTED IN USA PRICES SUBJECT TO CHANGE WITHOUT NOTICE. NOT RESPONSIBLE FOR TYPOGRAPHICAL ERRORS. Booklet Part # TPB /17/2017 Rev A

2 TABLE OF CONTENTS Page DED DUMP BODY BROCHURE DEDH DUMP BODY BROCHURE DED DUMP BODY PRICING, OPTIONS & PARTS DED REPLACEMENT PARTS (LOW PROFILE ONLY) DEP FLAT BED BROCHURE DEP FLAT BED PRICING, OPTIONS & PARTS IP SERIES, DUMP INSERT BROCHURE IP SERIES, DUMP INSERT PRICING, OPTIONS & PARTS IP140, TAILGATE SPREADER BROCHURE HYDRAULIC PUMPS/CYLINDERS/FITTINGS/HOSES DED REPLACEMENT PARTS (PRE 2016) MATERIAL APPENDIX TARP KIT BROCHURE NOTES 3, 4 5, , , , Rev C 2/17/2017

3 DownEaster BUILT TOUGH, BUILT TO LAST Since 1979 SCISSOR HOIST DUMP BODIES 2015 GM 60" CA 3500 shown Designed with the features you expect. Reliable and rugged scissor hoist, for proven load dumping of the heaviest materials. 10 Gauge construction throughout, with structural channel understructure. Easy release, locking pins for tailgate, top and bottom. Bolt on Sub frame, hoist and body, for ease of installation, transfer or replacement. LED lighting for visibility and less maintenance. 2.5" lower bed height than previous models Shipped fully assembled on hoist, sub frame and painted! Available in 304 Stainless Steel construction, with stainless interlaced understructure. 3 Rev C

4 SPECIFICATIONS DUMP BODY - SCISSOR HOIST SERIES 2017 SERIES Length Model Fixed Sides Cab to axle (CA) GVW Range Inside Dim. (I.D.) (L x W x H) Mounting length Body Width Cubic Yards (level, + 6", + 6") Hoist capacity Dump Angle Weight (lbs.) 8' DED " CA GM (pre 2011) 11.5k 13.5K 96" x 78" x 13" 91" to 93" 88" 2.2, 3.3, ton Class ' 3" 10' 6" 11' 3" DED09396 DEDS09396 DED10696 DEDS09396 DED11396 DEDS " 60" CA GM, FORD, RAM " CA Isuzu & Chevy Cab Forward 84" CA GM, FORD, RAM K 19.5K 14.5K 19.5K 13K 19.5K 111" x 86" x 13" 126" x 96" x 13" 135" x 86" x 13" 106" to 108" 121" to 123" 130" to 132" 96" 2.6, 3.8, , 4.3, , 4.7, ton Class ton Class ton Class ' DED1096 DEDS " 72", 84" CA F 650, International, 19.5K 25K 119.5" x 86" x 18" 117" to 119" 3.9, 5.2, ton Class STANDARD FEATURES All models are bolt on installation. Two Year Limited Warranty GENERAL TAILGATE *10 gauge construction throughout. * Formed 10 gauge inner, outer and end panels. *Dirt shedding, sloped design at side plate and tailgate top *1" hardened pins, (1" Stainless) with plasma cut * Double panel side plates equal over 1/4" thickness. latch receiving lock fingers. *Full depth 3/16"rear corner pillars incorporate recessed lighting, * Adjustable 1/4 chain for spreading aggregate keyhole banjo eyes and lower tailgate pin receiver. material & holding gate in down position. *All lighting is LED rubber mounted and NTEA and Federal compliant. *21/2" shorter deck height (9' only) CAB SHIELD * Mounting height of 9.5" chassis to floor (9' only) * Bolt on, 10GA (12GA SS) cab protector / overhang, for * 10" board extension pockets ease of install & future optional / custom overhang. *Self aligning rear latch release for the top gate pins * 12" (1/4 cab) overhang, standard. (9' & 11') *Integrated tarp hooks * Pre punched tarp mounting provisions. * DuPont Imron Elite black oven * Slotted dual windows cured paint w/ epoxy primer OPTIONS FLOOR & UNDERSTRUCTURE * Stainless body construction (excluding DED0888) *4" x 5.7# Channel long sills and 3" channel cross members (9') * 24" Cab Shield (1/2 cab) *6" x 8.2# Channel long sills (10', 10.5' 11') * Tarp assembly, manual or spring loaded. * 3/16" Stainless formed 7" long sills (SS body) * 3/16" floor (on 9' & 10' only) * 3" stainless tubing, interlaced cross members (SS body) *Coal chute, installed, painted or stainless *Two piece 10 gauge floor with 45 degree slopped corners * Backup, running or strobe lights in apron where meets seamless side plate. * Greasable Bronze bearings for underbody release mechanisms Dual action pump, shipped installed One handed, self aligning, locking latch w/ integrated spring retention Distributed by: 120 Old Lisbon RD. Topsham, ME (207) Fax (207) Specifications subject to change without notice 4 Rev C

5 DownEaster BUILT TOUGH, BUILT TO LAST Since 1979 DROP SIDE DUMP BODY 2017 GM 60" CA 3500 shown Designed with the features you expect. Reliable and rugged scissor hoist, for proven load dumping of the heaviest materials. 10 Gauge construction throughout, with interlaced understructure. Easy release, locking pins for tailgate, top and bottom. Bolt on Sub frame, hoist and body, for ease of installation, transfer or replacement. LED lighting for visibility and less maintenance. 2.5" lower bed height than previous models HD 512 scissor hoist, 5" bore x 16" stroke Available in 304 Stainless Steel construction, with stainless interlaced understructure. Stainless steel hinges w/ stainless pins. 5 Rev B

6 DUMP BODY - DROP SIDE SERIES SPECIFICATIONS 2017 SERIES Length Model Sides Cab to axle (CA) Inside Dimensions (L x W x H) Body Width Cubic Yards (level, + 6", + 6") Hoist capacity Dump Angle Weight (lbs.) 9' 3" DEDH09396 DEDHS " Hinged 60" CA GM, FORD, RAM (up to 19,500 GVW) 111" x 86" x 13" 96" 2.6, 3.8, ton Class Shipped fully assembled on hoist, sub frame and painted! STANDARD FEATURES All models are bolt on installation. Two Year Limited Warranty GENERAL FLOOR & UNDERSTRUCTURE *10 gauge body & bed. * 3" structural channel interlaced cross members (painted model) *Dirt shedding, sloped design at side plate and tailgate top * 3/16" formed 7" long sills * Double panel, Stainless steel 12 gauge side plates (both models) * 3" stainless tubing, interlaced cross members (SS body) *Dual pin latches per side, for safety and simplicity * Two piece 10 gauge floor *Full depth 3/16"rear corner pillars incorporate recessed lighting, *Bolt on sub frame and scissor hoist. keyhole banjo eyes and lower tailgate pin receiver. * Greasable Bronze bearings for underbody release mechanisms *All lighting is LED rubber mounted and NTEA and Federal compliant. (adjustable front & rear) *21/2" shorter deck height (9' only) * Mounting height of 9.5" chassis to floor (9' only) CAB SHIELD *8" board extension pockets * 12" (1/4 cab) 10GA (12GA SS) cab protector *Self aligning rear latch release for the top gate pins * Slotted dual windows *Integrated tarp hooks * overhang, standard. *DuPont Imron Elite black oven *10 gauge side panels with pre punched tarp mounting provisions. cured paint w/ epoxy primer *Straight overhang for ease of accessory installs TAILGATE OPTIONS *Formed 10 gauge inner, outer and end panels. * Stainless body construction *1" hardened pins, (1" Stainless) with plasma cut *Tarp assembly, manual latch receiving lock fingers. * Coal chute, installed, painted or stainless * Adjustable 1/4 chain for spreading aggregate * Backup, running or strobe lights in apron (painted model) material & holding gate in down position. Dual action pump, shipped installed One handed, self aligning, locking latch w/ integrated spring retention Distributed by: 120 Old Lisbon RD. Topsham, ME (207) Fax (207) Specifications subject to change without notice 6 Rev B

7 DUMP BODY - SCISSOR HOIST SERIES PRICING Part # Side Height DED " DED " DED " DED " DED " 2017 SERIES, PAINTED STEEL Description 8' 0" x 88" 2 3 yard DownEaster Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) 9' 3" x 96" 2 4 yard DownEaster Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) 10' 6" x 96" 3 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) 11' 3" x 96" 3 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) 10' x 96" 4 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) Dcode Part # Side Height DEDS " DEDS " DEDS " DEDS " 2017 SERIES, STAINLESS STEEL Description 9' 3" x 96" 2 4 yard DownEaster Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) 10' 6" x 96" 3 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) 11' 3" x 96" 3 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) 10' x 96" 4 5 yard DownEaster Dump Body with HD 515, 3200 PSI, 2 1/4" shaft, 5.5" bore, 20" stroke. (class 40) Dcode Part # Side Height DEDH " DEDHS " 2017 SERIES, DROP SIDE Description 9' 3" x 96" 2 4 yard DownEaster PAINTED DROP SIDE Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) 9' 3" x 96" 2 4 yard DownEaster STAINLESS DROP SIDE Dump Body with HD 512, 3200 PSI, 2" shaft, 5" bore, 16" stroke. (class 20) Dcode Note: DUAL ACTING PUMP STANDARD ON ALL SIZES Part # Complete factory assembly Options Description Dcode Complete assembly of factory, wiring, lights, hardware, cab shield Tarp 96" Tarp kit, manual for 96" body, not installed Truck tarp install Installation of truck tarp DEDP237 Coal Door / Inspection Door, Carbon Steel, 12 3/8" T x 13½" DED COAL CHUTE Coal chute for center gate, INSTALLED & PAINTED DEDP238 Coal Door / Inspection Door, STAINLESS Steel, 12 3/8" T x 13½" DED COAL CHUTE SS Coal chute, STAINLESS, for center gate, INSTALLED /2 cab shield (in lieu of 1/4 cab) for 96" body 2 4 yard /2 cab shield (in lieu of 1/4 cab) for 96" body 4 5 yard Cab shield window delete DEDP290 LED back up / utility light, 6'' oval s/t/t grommet mount SPE564 Window delete Plate hitch Primed only Pump delete LED Strobe light, 6'' oval s/t/t grommet..mount Plate Hitch Assembly with 2" receiver tube, D rings, and pintle holes. NOTE: 7 way electrical connector is included. Dupont Imron Expoxy primer finish, no paint deletion of hydrauilc pump and tank for PTO vehicles Rev B 2/17/2017

8 DUMP BODY PARTS, ' Part # Parts Description Dcode DEDM300 Cab shield, 12" overhang, 9' & 11' DEDM310 Cab shield, 24" overhang, 9' & 11' DEDM312S Cab shield, 12" overhang, STAINLESS, 9' & 11' DEDM314S Cab shield, 24" overhang, STAINLESS, 9' & 11' DEDM316 Cab shield, 24" overhang, 10' & 10.5'only DEDM318S Cab shield, 24" overhang, STAINLESS 10' & 10.5'only DEDM436 Chassis brackets, x DEDM442S Fuel filler neck bracket, x 1, stainless DEDM460S Mud flap bracket, Stainless DEDM522 9' sub frame, no hoist DEDM524 10' sub frame, no hoist DEDM604 Upper latch handle and lock, Painted x1 (specify L or R) DEDM604S Upper latch handle and lock, Stainless x1 (specify L or R) DEDM620 Latch assembly rear, bolt on style w/ bearings DEDM621 Latch assembly front, bolt on style w/ bearings DEDM626 Bent anchor bolt x DEDM640 Prop Rod, 25", round style DEDP100A 250 Amp MEGA Blade Fuse DEDP102 Reflector, 2 3/8 round, Red DEDP210 Adjustable yoke end, zinc, x DEDP217 Cylinder, 5" x 16" stroke DEDP218 Cylinder, 5.5" x 20" stroke DEDP222 Reflector, 2 3/8 round, Amber DEDP265 3/4'' LED marker light, RED, round, w/ grommet DEDP376 Sill plate x DEDP502 Battery cable set, 0/1 Gauge DEDT2096 Tailgate, 20" high, for 13" side wall DEDT2096S Tailgate, 20" high, for 13" side wall STAINLESS DEDT2496 Tailgate, 24" high, for 17" side wall HD 512B Hoist, 9' body, 5" x 16" stroke, no cylinder HD 515B Hoist, 10' & 11' body, 5.5" x 20" stroke, no cylinder HP112 Dump hinge, weld on HP116 Dump hinge, Bolt on, stainless bodies TPL169 Rubber bumper, 1 1/2" OD To order: Call Fax parts@downeastermfg.com 8 Rev A

9 DownEaster BUILT TOUGH, BUILT TO LAST Since 1979 PLATFORM BODIES 2017 Designed with the features you expect. LED, PC rated, rubber mounted lighting Tapered bulk head w/ light bar We use: DuPont Imron Elite LED Lighting Member of: 9

10 PLATFORM BODY - TREAD DECK SERIES SPECIFICATIONS BOX DELETE MODELS Length Model Sill Height Cab to axle (CA) Bed Dimensions (L x W ) Body Width OA Install Weight (lbs.) 7' 2" DEP0784 4" for 7', Box delete, SINGLE wheel only. 86" x 80" 84" 685 8' 6" DEP " for 8', 56" CA Box delete, SINGLE wheel only. 98" x 80" 84" 735 8' 6" DEP08696 DEPS " for 8', 56" CA Box delete, DUAL wheel only 102" x 92" 96" 835 SPECIFICATIONS CAB CHASSIS MODELS 9' 6" DEP09696 DEPS " 60" CA GM " CA Dodge " CA Ford " x 92" 96" ' DEP1296 DEPS1296 6" 84" CA GM " CA Ram / Sterling " CA Ford " x 92" 96" 1070 STANDARD FEATURES GENERAL BULK HEAD *11 gauge (1/8") Tread plate deck construction. * Welded on, 14 gauge cab protector, with slotted window *All lighting is LED rubber mounted and NTEA and Federal compliant. * External stake pockets w/ rub rail. and rubber mounted LED lighting. *Provisions for bolt on side extensions for rack sides. *DuPont Imron Elite black oven cured paint w/ epoxy primer *Two Year Limited Warranty OPTIONS * Scissor hoist conversion ( cab chassis only) FLOOR & UNDERSTRUCTURE *Bolt on bulk head side extensions for rack sides *4" x 5.7# Channel long sills and 3" channel cross members (box delete) * Goose neck door (specify CA) *6" x 8.2# Channel long sills and 3" channel cross members (Cab chassis) * Goose neck hitch plate (34" Chassis only) Distributed by: 120 Old Lisbon RD. Topsham, ME (207) Fax (207) Specifications subject to change without notice 10

11 FLATBED - TREAD DECK SERIES PRICING 2017 Dcode Part # Description Painted Black Box Delete Models DEP0784 7' 2" x 84", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 4" sills DEP ' 6" x 84", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 4" sills DEP ' 6" x 96", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 4" sills DEPS ' 6" x 96", DownEaster STAINLESS STEEL flatbed, tapered headboard, LED lighting w/ window, 4" sills Chassis Cab Models DEP ' 6" x 96", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 6" sills DEPS ' 6" x 96", DownEaster STAINLESS STEEL flatbed, tapered headboard, LED lighting w/ window, 6" sills DEP ' x 96", DownEaster diamond plate flatbed, tapered headboard, LED lighting w/ window, 6" sills DEPS ' x 96", DownEaster STAINLESS STEEL flatbed, tapered headboard, LED lighting w/ window, 6" sills Dump Hoist options HC 124B Hoist conversion, HC 124B, 4" x 16" stroke, includes pump, brackets, safety prop, & weld on dump hinge. ( for 9' 12' flatbed with 5" to 6" sills) HC 124B PD Hoist conversion, same as above, w/ POWER DOWN HP108 Rear Dump hinge assembly, w/ upper hinge pads and pivot pins (weld on only, requires frame modification) Part # Option Description Dcode 4" Sills (60 or 84) 4" sills in lieu of 6" sills on 60" & 84" CA models DEP200 Headboard side extensions, for square bulkhead. (pair) Window delete Window deletion, solid front panel Goose neck door Gooseneck door only, w/ hinges ( replacement ) Goose neck door installed 1 Gooseneck Plate Hitch Body Options Gooseneck door, installed during production Gooseneck hitch plate only, with 2 5/16 ball, d rings Gooseneck Plate Hitch Installed Gooseneck hitch plate installed, with 2 5/16 ball, d rings, and 7 way plug includes gooseneck door installation (installed 3" in front of axle), /17/2017 To order: Call Fax parts@downeastermfg.com 11 Rev B

12 DownEaster BUILT TOUGH, BUILT TO LAST Since 1979 TRUCK DUMP INSERT Designed with the features you expect. 8', 6', Painted steel & Stainless steel models. Dump angle of 47 degrees. Compact, yet rugged scissor hoist with a 6,000 lb. lift capacity We use: Member of: DuPont Imron Elite Hydraulic pumps Hydraulic Cylinders Specifications subject to change without notice DO NOT EXCEED VEHICLE GVW Rev. C

13 DUMP INSERT - SCISSOR HOIST SERIES SPECIFICATIONS $ $ Model# IP 100 / 100S IP 110 / 110S GWR: # Weight: Payload capacity: Volume: (level) Floor bottom WxL: Bed top WxL: Deck height: Side height: Stake pockets: Cylinder bore x length: 742 lbs 5,258 lbs. 2.0 Cubic Yards 48.5" x 96" 63.4" x 101.7" 6,000 lbs. 660 lbs. 5,340 lbs. 1.6 Cubic Yards 48.5" x 76" 63.4" x 81.7" 8" 18" 6 3.5" x 10" Hydraulic pump: Dual action (power up / power down down) STANDARD FEATURES *12 gauge floor / 14 gauge side plates OPTIONS * Stainless steel tub on both models. *Two way tailgate (top/bottom hinged) w/ (steel sub frame) * Electric over hydraulic pump w/ * 1/4 Cab protector w/ slotted window 10' pendant control cord. & pre punched tarp mounting holes. *Spring loaded tailgate bottom *Mesh roller tarp, manual release pins. * Adjustable 3/16 chain for spreading aggregate material & holding gate in down position. *Compact scissor hoist * Replacement Tailgate auger spreader w/ 3.5" diameter cylinder. w/ electric drive. *47 degree dump angle (double acting pump required) * Internal stake pockets * DuPont Imron Elite black oven cured paint w/ epoxy primer *Two Year Limited Warranty 8' Steel painted model shown Stainless steel tub & Tarp optional Stainless Steel tailgate replacement auger spreader, w/ 1/2" HP individual drive motors (IP 140) Distributed by: 120 Old Lisbon RD. Topsham, ME (207) Fax (207) Specifications subject to change without notice DO NOT EXCEED VEHICLE GVW Rev. C

14 IP SERIES OPTIONS & PRICING IP100D IP110D DESCRIPTION DownEaster dump insert, 8' bed, painted carbon steel, w/ electric hydraulic scissor hoist, power up/ power down, two way tailgate. DownEaster dump insert, 6.5' bed, painted carbon steel, w/ electric hydraulic scissor hoist, power up/ power down, two way tailgate. Dcode IP100SD IP110SD DownEaster dump insert, 8' bed, STANLESS STEEL, w/ electric hydraulic scissor hoist, power up/ power down, two way tailgate. DownEaster dump insert, 6.5' bed, STANLESS STEEL, w/ electric hydraulic scissor hoist, power up/ power down, two way tailgate. (Stainless steel dump insert pricing subject to change without notice, due to sur charges ) PART # OPTION DESCRIPTION Dcode Cab Shields IP120 IP120S Cab shield, 1/4 overhang, bolt on, painted steel, for IP series dump insert, dual slotted window, roller tarp provisions. (hardware included) Cab shield, 1/4 overhang, bolt on, STAINLESS steel, for IP series dump insert, dual slotted window, roller tarp provisions. (hardware included) Tarp Tarp 6312 Tarp Roller Kit, for dump insert, includes mesh tarp and all mounting hardware TPU106 Replacement tarp, mesh only IP600 Dodge short bed adaptor mounting kit, for 2003' to 2009' TKA105 Install kit, complete with harness IP140 DownEaster Tailgate replacement Spreader, stainless, dual flight, center feed auger, dual electric motors, 1/2 HP drive, with removable spinner assembly Tailgate Spreader see next page for brochure IP140 V DownEaster Tailgate replacement Spreader, stainless, dual flight, center feed auger, dual electric motors w/ VARIABLE CONTROLS, 1/2 HP drive, with removable spinner assembly IP150 Dump body adaptor kit, for IP140 tailgate spreader. fits 2 4 yard dump bodies between 75' 88' Replacement parts TA172 Scissor hoist assembly, IP series, Upper frame w/ welded cross rod, and bolt on lower link arms. (no cylinder ) See Replacement parts hydraulics page for pump parts. TA272 Lower links only, (pair) TPH138 Cylinder Hydraulic, 3.5 x 9.5 x 1.75 rod dia Seal rebuild kit, for cylinder TPL126 Tailgate Chain,3/16" zinc, 40" long TPM119 Spring Latch, 5/8" with plain tube IP510 Bolt down, for truck frame (each) HWF607 Hardware bolt kit, for hold down above (set of 4) TA176 Replacement tailgate, for Painted models, (2006 & up) TA177 Replacement tailgate, for STAINLESS models, (2006 & up) TA188 3/4" yoke pin w/ welded ring, zinc To order: Call Fax parts@downeastermfg.com 14 Rev D

15 SPREADER - IP140 TAILGATE SERIES Fits multiple brands of Dump inserts Dump Body adapter kit SPECIFICATIONS $ Model# IP140 Construction: 12GA Stainless steel hopper Size : 60" W x 16" H x 10" D STANDARD FEATURES * 8' to '20' spread pattern * Precise flow rate adjustments * 1/2 HP electric drive, thru gear 60:1 reduction * Center feed auger * Integrated lifting hook * Fits multiple brands w/ adaptor kits * Self aligning bearings * Mixing tine for material agitation * * * * OPTIONS Removable spinner basket Rotating spinner assembly remains level Stainless steel drive motor 200# vibrator * Variable speed control for spinner (recommended) * Mounting kit for 2 4 yard dump bodies Distributed by: 120 Old Lisbon RD. Topsham, ME (207) Fax (207) Specifications subject to change without notice 15

16 HYDRAULIC PUMPS AND CYLINDERS PART # DESCRIPTION Dcode TPE177 Solenoid, for Trailer Hydraulic Pumps TPH108A TPH100 TPH107 TPH107A TPH108 TPH131 PUMPS & PARTS Motor, for SPX / Stone hydraulic pump ( note spline or slotted) KMDI Motor, for Fenner hydraulic pumps, single or double acting, ( note spline or slotted) Hydraulic Pump, Power up Gravity down (IP INSERTS) (1 1/2 gal tank), includes controller (3 wire) Hydraulic Pump, Power up Gravity down (DUMP BODY) (2 1/2 gal tank), includes controller (3 wire) Hydraulic Pump, Power up Power down 1 1/2 gal tank includes controller (4 wire) Magnetic Valve, 10v coil, for hydraulic pump with power down or gravity down TPH132 Valve Cartridge Gravity Down TPH133 Valve Cartridge Power Down DEDP206B Hydraulic Tank, for Fenner Pumps 1 1/2 gallon Hydraulic Pump Tank, 2.5 gallon Replacement cap, for trailer & dump hydraulic tanks O Ring, for Hydraulic Pump Controller Quick disconnect, gravity down single action Horizontal tank plumbing/ Distribution kit for HC5 (SPX) TPH157 Dist flow control kit (1/2 gal/minute) (KFC2) TPH158 Dist flow control kit ) (1 gal/minute ) (KFC4) Hoses TPH186 TPH187 Hydraulic hose assembly 3/8'' hose length (TOTAL LENGTH 29'')..dump bodies (8 11) Hydraulic hose assembly 3/8'' hose..45 length (TOTAL LENGTH 47.5)..DUMP BODY Dual Action only TPH193 Hydraulic hose, 1/4'', 43'' length, IP TPH194 Hydraulic hose, 1/4'', 56'' length, IP110 DUAL ACTION TPH195 Hydraulic hose, 1/4'', 60'' length, IP TPH196 Hydraulic hose, 1/4'', 72'' length, IP100 DUAL ACTION To order: Call Fax parts@downeastermfg.com 16 Rev A

17 HYDRAULIC PUMP REFERENCES SPX RED GREEN WHITE MONARCH / BUCHER BLACK Pendants PART # DESCRIPTION Dcode TPE153 TPE169 Remote control (pendant), power up/ gravity down) (10'cord) (3 wires) SPX / Bucher Remote control (pendant), power up/ power down) (10'cord) (4 wires) SPX / Bucher Fittings PART # DESCRIPTION Dcode TPH120 Breather cylinder, 1/2" NPT port TPH120A Breather cylinder, 1/4" NPT TPH JIC, elbow to pipe TPH155 Elbow fitting, 3/8 male x 3/8 male TPH156 Extra long elbow fitting, 3/8 male x 1/4 male TPH159 Elbow, 3/4" X 3/8" JIC TPH160 ORING BREATHER VENT 8 SAE TPH161 3/8" Male o ring, to 3/8" female pipe TPE117 Short pump elbow (90), 3/8"JIC male x 1/4"NPT male To order: Call Fax parts@downeastermfg.com 17 Rev A

18 ROLLER TARP KIT - DUMP PRODUCTS Tarp kits available for all DownEaster Dump Trailers & Dump Bodies * Heavy duty mesh covering * Spring loaded break away crank handle * 1 1/2" diameter Aluminum extruded tarp axle * Steel powder coated mounting brackets and sealed bearings * Direct mount to DownEaster brand units, with no additional brackets required. * Minimal install time. * Most States REQUIRE loads to be covered by law. * Universal locating brackets available for custom mounting Distributed by: 120 Old Lisbon RD. Topsham, ME (207) Fax (207) Specifications subject to change without notice 18 Rev C

19 DUMP BODY PARTS, PRE 2016 DEP209/210 DEDM612/613 DEDM616/617 DED Part # Parts Description Dcode DEDM600L / DEDM600R Cam latch for gate, (1) SPECIFY LEFT OR RIGHT, does not include cover SPG110 DEDM602 DEDT1888 DEDT1896 DEDT2496 DEDM428 DEDM0922 Handle grip, gate arm, rubber with finger grips S.S. latch cover, formed for cam latch. Tailgate for 88" wide body, 2 3 yard, 12" sides (tailgate is 18" high) Tailgate for 96" wide body, 2 3 yard, 12" sides (tailgate is 18" high) Tailgate for 96" wide body, 3 4 yard, 18" sides (tailgate is 24" high) Mud flap brackets, bolt on, includes hardware kit. Filler neck support, bolt on, for scissor hoist bodies only DEDM432 DEDM550 DEDM405 DEDM408 DEDM406 DEDM410 DEDM407 DEDM409 DEDP203 DEDM612 / DEDM613 Sub frame Chassis brackets, Pair (2) includes: painted steel 3/8" HR bracket(s), Prop rod assembly, scissor hoist body, painted black Cab shield, 1/4 (12") overhang, 48.5" tall, bolt on, for scissor hoist dump body, (hardware NOT included ) (2 3 yard, 88" wide) Cab shield, 1/4 (12") overhang, 48.5" & 54.5" tall, bolt on, for scissor hoist dump body, (hardware NOT included ) (2 3 yard) 96" wide Cab shield, 1/4 (12") overhang, 48.5" tall, bolt on, for scissor hoist dump body, (hardware NOT included ) (3 4 yard, 96" wide) Cab shield, 1/4 (12") overhang, 61" tall, bolt on, for scissor hoist dump body, (hardware NOT included ) (GM4500) Cab shield, 1/2 (24") overhang, 48.5" tall, for 96" body 2 3 yard Cab shield, 1/2 (24") overhang, 48.5" tall, for 96" body 3 4 yard Cab shield hardware kit Latch handle assembly, front (handle, pipe, bushings) specify 88" or 96" body DEDM616 / DEDM617 Under body latch assembly, REAR, specify 88" or 96" body DEDM620 Lower tailgate latch receiver and locking arm assembly, 3/8" HR steel, bare, welded with clevis pin. SPECIFY LEFT OR RIGHT DEDP213 Wire Harness for 2 3 yard DownEaster dump body (2 components) DEDM yard dump body sub frame, 72" to hinge, for 9' & 9' 3" bodies DEDM yard dump body sub frame, 72" to hinge, for 10' body only DEDM yard dump body sub frame, 84" to hinge, for 10' & 11' body only HD 512 Hoist only HD 512 hoist for 2 3 yard dump bodies, requires 5" cylinder x 16" stroke cylinder, not included, painted black, includes lift shafts & prop rod HD 515 Hoist only HD 515 hoist for 2 3 yard dump bodies, requires 5.5" cylinder x 20" stroke cylinder not included, painted black, includes lift shafts & prop rod HD 512SUB HD 512 hoist conversion kit, 5' cylinder x 16' stroke, w/ sub frame & pump HD 515SUB HD 515 hoist conversion kit, 5.5' cylinder x 20' stroke, w/ sub frame & pump DEDP217 Cylinder, Hydraulic 5" x 16" x 2" rod dia., for HD 512 hoist DEDP218 Cylinder, Hydraulic, 5.5" x 20"x 2.25 rod dia., for HD 515 hoist DEDP209 Bent anchor bolt w/1/2 13 threads one end for clevis linkage assembly DEDP210 Adjustable yoke end, 1/2 13 female thread, for 1/2" pin DEDP100A MEGA Blade Fuse, 250 Amp To order: Call Fax parts@downeastermfg.com 19 Rev A

20 APPENDIX 20

21 NOTES To order: Call Fax

22 Coastal Metal Fab was founded in 1979 as a custom metal fabrication shop. Starting in 1993, we began designing and manufacturing salt & sand spreaders, under the DownEaster brand name. Since that time, we have grown steadily and become one of the leading brands in snow and ice control, in the U.S. Our 30,000 sq. ft. facility can accommodate the high output of products required to supply our dealers, all over North America and beyond. In 2000, we began manufacturing trailers & truck bodies; and today still take pride in the " Built in Maine, built to last" craftsmanship. DownEaster 120 Old Lisbon RD. PH (207) Topsham, ME Fax (207) or us to order: parts@downeastermfg.com Distributed by: