Torque Rods. For more information visit or call The Universal Group, LLC All Rights Reserved

Transcription

1 Torque Rods For more information visit or call Universal Group The Universal Group, LLC 1025 Thomas Busch Memorial Highway Pennsauken, New Jersey Fax on 2018 The Universal Group, LLC All Rights Reserved

2 TM TRAXX ROD Torque Rods TM The TRAXX ROD Performance - Up to *five times the performance life of conventional double shot bushings and similar performance of ball and socket torque rods, with better energy absorption, delivering superior bushing retention and longer component life for heavy-and severe-duty applications. Heavy-duty - Recommended for 40,000 lb. to 52,000 lb. capacity suspensions in most vocational applications. Severe-duty - Recommended for 60,000 lb. to 70,000 lb. capacity suspensions. Also available for 40,000 lb. to 52,000 lb. capacity suspensions for even longer service intervals. Fabricated rod body works in conjunction with our proprietary bushings to meet a large footprint for heavy loads and energy absorption from high articulation and side load events. Offers easy and inexpensive flexibility to create a variety of torque rod lengths. Length variety significantly reduces the need for shims which can compromise the connection integrity if not secured properly or used with correct shims. One-piece design supports uptime by removing and replacing with the original one-piece length for an accurate fit the first time. Curled outer metal casing places rubber in pre-compression mode to harness the energy and perform at the highest peak, providing best-in-class durability and performance. Proprietary rubber material helps reduce cost of ownership by absorbing horizontal, vertical and torsional forces for long component life. High strength bond of rubber to inner metal eliminates friction between the inner metal and rubber, minimizing bushing wear and increasing component life cycle. Hardened steel bar pins and taper pins deliver increased resistance against wear and abrasion to extend the service intervals of the component.

3 TM TRAXX ROD Torque Rods Smart Numbering System The TRAXX ROD family uses the Smart Numbering System, in which each digit signifies the body style, bushing combination, bushing hole diameter, bushing clocking angle and the torque rod length.

4 Hendrickson TRAXX ROD Torque Rods Description Length H Hendrickson Traxx Rod for PRIMAAX EX / Kenworth / Peterbilt Refuse Hole Size Type Automann TMR512 Parts Flagg Atro Other TR / C H Hendrickson Traxx Rod for PRIMAAX TMR617 TR EX / Kenworth / Peterbilt Refuse H Hendrickson Traxx Rod for PRIMAAX TMR684 TR S EX / Autocar / Other H Hendrickson Traxx Rod for Peterbilt TMR PB15 TR STR-1003 AirTrac, Air Leaf H Hendrickson Traxx Rod for PRIMAAX EX / Hino H Hendrickson Traxx Rod for PRIMAAX 24.4 TMR481 TR EX/FIREMAAX EX / Fire and Rescue H Hendrickson Traxx Rod PRIMAAX EX TMR634 TR / Navistar H Hendrickson Traxx Rod for PRIMAAX TMR703 TR / EX / Navistar / Caterpillar STR-1002 H Hendrickson Traxx Rod for Peterbilt TMR532B PB46 STR-1005 Low Air Leaf / Flex Air

5 The Universal Group, LLC Hendrickson TRAXX ROD Torque Rods Description Length Hole Size Type Automann Parts Flagg Atro Other H TMR674 TR \ Walking Beam / Peterbilt / Other S \ H TMR TR / Walking Beam / Kenworth TR H TMR673 TR Walking Beam / Kenworth H TMR480 TR Walking Beam / Fire and Rescue H TR Walking Beam / Freightliner H Hendrickson Traxx Rod for HAULMAAX/ 25 TMR640 TR / Walking Beam / Mack / Waste TR Management Spec H TMR501 TR Walking Beam / Navistar H Walking Beam / Autocar

6 Fixed Length Torque Rods - Straddle / Straddle Part Shaft Hole Number Description Type OEM Length Diameter Size Automann Parts Flagg STR-1000 Freightliner /16 TMR FL39 STR-1001 Peterbilt High Confinement C /4 1 1/4 TMR Kenworth Non-Rebushable STR-1002 International High Confinement C2 25 3/8 TMR IH22 Ford Non-Rebushable STR-1003 Peterbilt /8 TMR PB15 STR-1004 Peterbilt /32 1 1/4 TMR PB33 STR-1005 Peterbilt Sealed /16 TMR PB46 STR-1006 Mack 20.0 Sealed 17QF460P /8 TMR568 STR-1007 Mack 21.5 Sealed 17QF460P /2 1 1/8 TMR571 STR-1008 Mack 22.0 Sealed 17QF460P /8 TMR555 STR-1009 Mack 22.5 Sealed 17QF460P /2 1 1/8 TMR573 STR-1010 Mack 24.5 Sealed 17QF460P /2 1 1/8 TMR576 STR-1016 Mack 21 17QF473M /8 TMR STR-1017 Mack 21 Sealed 17QF460P /8 TMR570

7 The Universal Group, LLC Fixed Length Torque Rods - Straddle / Straddle Part Shaft Hole Number Description Type OEM Length Diameter Size Automann Parts STR-1019 Freightliner Sealed /4 MR Flagg STR-1020 International C /8 1 1/4 TMR IH11 STR-1021 International C /4 TMR512T IH C92 STR-1022 Freightliner /16 TMR FL STR-1023 Freightliner /5 1 9/16 TMR FL23 E-3546 STR-1024 Freightliner /16 TMR FL42 E-8808 Fixed Length Torque Rods - Straddle / Tapered Part Shaft Hole Number Description Type OEM Length Diameter Size Automann Parts Flagg STR-1011 Mack Sealed 17QF463P /4 1 1/4 TMR STR-1012 Mack Sealed 17QF464P /4 1 1/8 TMR562 STR-1013 Mack Sealed 17QF463P /4 1 1/4 TMR STR-1014 Mack Sealed 17QF463P /4 1 1/4 TMR592 STR-1015 Mack 24.5 Sealed 17QF463P /2 1 1/4 TMR STR-1018 Mack 25.5 Sealed 17QF464P /2 1 1/8 TMR566

8 ZF Uni-Rod Full Ball Three Piece Kits Reference Suspension Rating (lbs.) Description Automann Flagg STRU-3001 HU K-38K Standard Hollow Ball, Both Ends (7/8 Dia. Hole), Neway Air Ride Suspension TMR TR17 STRU-3002 BU K-36K STRU-3003 HU K-36K STRU-3004 HU-3436L 34K-36K STRU-3005 SBU K-36K Standard Ball Stud (Hendrickson) Both Ends (1 1/8-12 Threads) Standard Hollow Ball, Both Ends (7/8 Dia. Hole), Fruehauf Air Ride Suspension Standard Hollow Ball, Both Ends (7/8 Dia. Hole), Fruehauf Air Ride Suspension Standard Ball Stud (Hendrickson) One End (1 1/8-12Thread). Standard Straddle Ball, Other End TMR TR3 TMR TR18 TMR TMR TR4 STRU-3006 SU K-55K Standard Straddle Ball, TMR TR2 Both Ends. Also Used as A Track Bar And For On-Highway Use Up To 55,000 Suspension. STRU-3007 IHU-3444* 34K-65K STRU-3008 MU K-55K Offset Straddle Ball, One End. Standard hollow Ball, Other End (1 1/8 Dia. Hole). Navistar Suspension Only. Ball Stud, Both Ends (1 1/4-12 Thread). Mack Suspension Only. TMR TR15 TMR TR5 STRU-3009 SMU K-55K Ball Stud, One End (1 1/4-12 Thread). Standard Straddle Ball, Other End. Mack Suspension Only. TMR TR6 * Indicates Heavy - Duty Kit

9 The Universal Group, LLC ZF Uni-Rod Full Ball Three Piece Kits Reference Suspension Rating (lbs.) Description Automann Parts Flagg STRU-3010 BU-3844* 38K-65K Standard Stud (Hendrickson) Both Ends (1 1/4-12 Threads). TMR TR10 STRU-3011 HU-3844* 38K-65K Standard Hollow Ball, Both Ends (1 1/8 Dia. Hole). TMR TR11 STRU-3012 SBU-3844* 38K-65K STRU-3013 SBU * 38K-65K STRU-3014 SHU-3844* 38K-65K Standard Ball Stud (Hendrickson) One End (1 1/4-12 Thread). Standard Straddle Ball, Other End. Standard Ball Stud (Hendrickson) One End (1 1/4-12 Thread). Straddle Ball, Other End (For 3/4 Dia. Mounting Bolts). Standard Straddle Ball, One End. Standard Hollow Ball, Other End (1 1/8 Dia. Hole). TMR TR13 TMR TR19 TMR TR12 STRU-3015 SU-3844* 38K-65K Standard Straddle Ball, Both Ends. Also Used As A Track Bar (2 3/8 Ball). TMR TR9 STRU-3016 LMU-4044* 44K-80K STRU-3017 MU-4044* 38K-65K Ball Stud, One End (1 1/4-12 Thread). Straddle Ball, Other End (For 7/8 Mounting Bolts). Mack Suspension Only. Ball Stud, Both Ends (1 1/4-12 Thread). Mack Suspension Only. TMR TR16 TMR TR7 STRU-3018 SMU-4044* 38K-65K Ball Stud, One End (1 1/4-12 Thread). Standard Straddle Ball, Other End. Mack Suspension Only. TMR TR8 Note: Where Mack Suspension Only is specified, the mounting ball stud taper differs from normal industry standards.

10 Hendrickson Ultra Rod Two Piece Torque Rods - Tube Ends Mounting Replacement Hole End Type Center B Bushing Diameter Automann Parts H Straddle 4 3/8 H TMRN H Straddle 4 3/8 H /8 TMRN B H Straddle 5 3/8 H /4 TMRN H B Straddle 5 11/16 H /4 TMRN H Straddle H /8 TMRN B D x E Replacement End Type Thread Bushing Automann Parts H Tapered 2 x 1 1/8 H TMRN H D Tapered 1 7/8 x 1 1/4 H TMRN H E Tapered 3 x 1 1/4 H TMRN Hendrickson Ultra Rod Two Piece Torque Rods - Spacer Ends Mounting Length Replacement Hole End Type Center B C to C Bushing Diameter Automann Parts B H Straddle 4 3/8 35 H TMRN H Straddle 4 3/8 27 H TMRN H Straddle 5 11/16 27 H /4 TMRN768 - H Straddle 4 3/8 27 H /4 TMRN H Straddle 4 3/8 27 H /8 TMRN

11 The Universal Group, LLC Hendrickson Ultra Rod Two Piece Torque Rods - Spacer Ends D to E Length Replacement End Type Thread C to C Bushing Automann Parts H Mack Tapered 1 7/8 x 1 1/4 35 H TMRN D H Mack Tapered 1 7/8 x 1 1/4 27 H TMRN E H Tapered 2 x 1 1/8 35 H TMRN H D Tapered 2 x 1 1/8 27 H TMRN E H Tapered 3 x 1 1/4 35 H TMRN H D Tapered 3 x 1 1/4 27 H TMRN E H Tapered 35 H TMRN H B Tapered 27 H TMRN Hendrickson Ultra Rod Plus Two Piece Torque Rods - Tube Ends Mounting Replacement Hole End Type Center B Bonded Bushing Diameter Automann Parts H Blank TMRU H Straddle 4 3/8 H TMRU HD B Hendrickson Ultra Rod Plus Two Piece Torque Rods - Spacer Ends Mounting Replacement Hole End Type Center B Bonded Bushing Diameter Automann Parts H Blank TMRU H Straddle 4 3/8 H TMRU HD B D x E Replacement Hole End Type Thread Bonded Bushing Diameter Automann Parts H Tapered 3 x 1 1/4 H TMRU HD D E

12 SOT Universal Group No. TR THE UNIVERSAL GROUP, LLC, THE UNIVERSAL GROUP, UNIVERSAL GROUP, U Design, Globe Design, and U and Globe Design are trademarks of The Universal Group, LLC Pennsauken, New Jersey The Universal Group, LLC All Rights Reserved