STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used:

Transcription

1 SPEC # T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Trueman Welters Seth Strehler 1600 Highway 55 East Buffalo, MN Version of Excel used: Spec # Information Requested Answer 1.0 Tractor Catalog Section Price List Title: New Holland Boomer/ Workmaster Implements Date & I.D. of Price List 1/1/2018 U.S. NO A Percentage Discount to be applied to Price List 20% 1.1 Price for manuals, (service, parts, repair, and operations) NO BID 1.2 Price for set of fluid and air filters N/A 2.0 PERFORMANCE/EXTENDED WARRANTY OPTIONS Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc. (Specify years, miles or hours extended term covers.) 2.1 NO BID 2.2 NO BID 3.0 INSTALLATION - PER HOUR $ Installation services may be requested on an "as needed" basis. See Special Terms and Conditions 4.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: Monthly Rental Rate: Percent (%) of Rental Fee applied to purchase price: N/A N/A N/A N/A If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price N/A 6.0 PERCENT DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES See Special Terms and Conditions 0% 7.0 DELIVERY STARTING POINT - City, State, Zip Buffalo, MN Delivery price per loaded mile. $2.50 See Special Terms and Conditions - DELIVERY CHARGES (No flat rate allowed)

2 Equipment Description Implement Index (Page 1) LATEST REVISION PAGE NUMBER Index 01/01/18 1 Implement Compatibility Chart 01/01/18 3 Backhoe Models: 01/01/18 4 NEW 905GBL / 910GBL / 915GBH / 925GBH / 935GBH Blade (Front Mount) Models: 01/01/18 27 NEW 60RBHB / 60CBHA / 72CBHA Broom (Front Mount) Models: 01/01/ GR / NEW 60COBB / 72COBA / 72COBB Snow Blower Models: 01/01/18 49 Front-Mount NEW 50RSHB /836GS / 63CSHB / 74CSHA / 74CSHB Rotary Finish Mower Models: 01/01/18 75 Mid-Mount NEW 160GMS / 260GMS / 266GMS / 272GMS / 366GMS 372GMS Rear 310GM - 60" / 320GM - 72" / 330GM - 90" 700 Series Rotary Cutter Models: 01/01/18 86 Value 714 / 716 / 717 Medium Duty 736 / 737 / 738 Heavy Duty 757 / 758 Heavy Duty - Pull Type 780 Page 1 of 110

3 Implement Index (Page 2) Equipment Description LATEST REVISION PAGE NUMBER Tiller Models: 01/01/ A 60" / 72" Work EZ Implement Models: Work EZ EZ Match Quick Hitch 01/01/18 98 Work EZ Series Light Duty Box Blades EZ48BL / EZ60BL Work EZ Series Standard Duty Box Blades 60BM / 72BM / 84BM Work EZ Series Light & Medium Duty Rear Blades EZ60SM / EZ72SM / EZ84SM Work EZ Series Heavy & Heavy Duty Plus Rear Blades 84SH / 96SH Work EZ Disk Harrow EZ78DC Work EZ Series Landscape Rakes EZ72LR Work EZ Bale Carriers Bale Carrier Bale Spear Work EZ Hay Spears Single Bale Quick Attach Double Bale Quick Attach 01/01/ /01/ /01/ /01/ /01/ /01/ /01/ /01/ Page 2 of 110

4 IMPLEMENT COMPATIBILITY CHART Boomer TL Loader 915GBH Backhoe 260GMS Mid Mount Mower 836GS Snow Blower 526GR Broom 60CBH Blade 235TL Loader C C LC LC LC 915GBH Backhoe C LC LC LC LC 260GMS Mid Mount Mower C LC NC NC NC 836GS Snow Blower LC LC NC QC QC 526GR Broom LC LC NC QC QC 60CBH Blade LC LC NC QC QC Boomer 33/37 (T4B) 250TLA1 Loader 925GBH 935GBH Backhoe 366GMS Mid Mount Mower (ROPS Only) 63CSHB 74CSHA Snow Blower 72COBB Broom 72CBHA Blade 250TLA1 Loader C C LC LC LC 925GBH 935GBH Backhoe C NC LC LC LC 366GMS Mid Mount Mower (ROPS Only) 63CSHB 74CSHA Snow Blower C NC NC NC NC LC LC NC QC QC 72COBB Broom LC LC NC QC QC 72CBHA Blade LC LC NC QC QC Boomer 41/47 (T4B) 260TLA1 Loader 925GBH 935GBH Backhoe 372GMS Mid Mount Mower (ROPS Only) 63CSHB 74CSHA Snow Blower 72COBB Broom 72CBHA Blade 260TLA1 Loader C C LC LC LC 925GBH 935GBH Backhoe C NC LC LC LC 372GMS Mid Mount Mower (ROPS Only) 63CSHB 74CSHA Snow Blower C NC NC NC NC LC LC NC QC QC 72COBB Broom LC LC NC QC QC 72CBHA Blade LC LC NC QC QC Boomer 35/40 (T4B) 250TLA2 Loader 925GBH 935GBH Backhoe 366GMS Mid Mount Mower (ROPS Only) 63CSHB 74CSHA Snow Blower 72COBB Broom 72CBHA Blade 250TLA2 Loader C C LC LC LC 925GBH 935GBH Backhoe C NC LC LC LC 366GMS Mid Mount Mower (ROPS Only) 63CSHB 74CSHA Snow Blower C NC NC NC NC LC LC NC QC QC 72COBB Broom LC LC NC QC QC 72CBHA Blade LC LC NC QC QC Boomer 45/50/55 (T4B) 260TLA2 Loader 925GBH 935GBH Backhoe 372GMS Mid Mount Mower (ROPS Only) 63CSHB 74CSHA Snow Blower 72COBB Broom 72CBHA Blade 260TLA2 Loader C C LC LC LC 925GBH 935GBH Backhoe C NC LC LC LC 372GMS Mid Mount Mower (ROPS Only) 63CSHB 74CSHA Snow Blower C NC NC NC NC LC LC NC QC QC 72COBB Broom LC LC NC QC QC 72CBHA Blade LC LC NC QC QC Boomer 46D/54D (T4B) 250TL IV250TLA (New Axle) Loader 250TL IV250TLA (New Axle)Loader 925GBH 935GBH Backhoe 272GMS Mid Mount Mower 74CSHB Snow Blower 72COBA Broom 72CBHA Blade C C LC LC LC 925GBH 935GBH Backhoe C LC LC LC LC 272GMS Mid Mount Mower C LC NC NC NC 74CSHB Snow Blower LC LC NC QC QC 72COBA Broom LC LC NC QC QC 72CBHA Blade LC LC NC QC QC NEW Workmaster 25S 100LC Loader 905GBL Backhoe 160 Mid Mount Mower 50RSHB Snow Blower 60COBB Broom 60RBHB Blade 100LC Loader C C LC LC LC 905GBL Backhoe C C LC LC LC 160GMS Mid Mount Mower C C NC NC NC 50RSHB Snow Blower LC LC NC QC QC 60COBB Broom LC LC NC QC QC 60RBHB Blade LC LC NC QC QC NEW Workmaster 25 (T4B) 200LC Loader 910GBL Backhoe "Coming Soon" Snow Blower "Coming Soon" Broom "Coming Soon" Blade 200LC Loader C LC LC LC 910GBL Backhoe C LC LC LC "Coming Soon" Snow Blower NC NC NC LC LC QC QC "Coming Soon"Broom LC LC QC QC "Coming Soon" Blade LC LC QC QC Workmaster 33/37 (T4B) 140TL Loader 925GBH 935GBH Backhoe 366GMS Mid Deck 63CSHB 74CSHA Snow Blower 72COBB Broom 72CBH Blade 140TL Loader C C LC LC LC 925GBH 935GBH Backhoe C NC LC LC LC 366GMS Mid Deck C NC NC NC NC 63CSHB 74CSHA Snow Blower LC LC NC QC QC 72COBB Broom LC LC NC QC QC 72CBH Blade LC LC NC QC QC Workmaster 35/40 (T4B) 140TLA2 Loader 925GBH 935GBH Backhoe 366GMS Mid Deck 63CSHB 74CSHA Snow Blower 72COBB Broom 140TLA2 Loader C C LC LC LC 925GBH 935GBH Backhoe C NC LC LC LC 72CBH Blade 366GMS Mid Deck C NC NC NC NC 63CSHB 74CSHA Snow Blower LC LC NC QC QC 72COBB Broom LC LC NC QC QC 72CBH Blade LC LC NC QC QC Legend C Compatible NC Not Comaptible *LC Limited Compatibility QC Quick Connect *LC Attachment mount brackets are compatible, the attachment itself is NC. i.e.: The implement must be removed in order to attach the other implement. However, both implements mounting brackets can stay on the tractor QC These attachments share a common quick connector and cannot be used at the same time Page 3 of 110

5 -CP2E GBL BACKHOE FOR WM25S ONLY Standard Equipment BACKHOE MODEL: 905GBL ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: 905GBL backhoe package includes: Current New Holland Compact Models - Basic Packaged Backhoe - WORKMASTER 25S - Subframe - Hydraulic Kit NOTE: 905GBL is only compatible with - Swivel Seat Base (for WM25S) the WORKMASTER 25S Subcompact - 9" Bucket Specifications: Transport Height (in.): 74.7 Loading Height (in.): 59.6 Overall Width (in.): 45.3 Ground Clearance (in.): 12.8 Maximum Digging Depth (in.): 79.4 Reach from Centerline of Swing Pivot (in.): Swing Arc (deg.): 135 Bucket Rotating (deg.): Stabilizer Spread (Down) (in.): 78.6 Stabilizer Spread (Up) (in.): 53.2 Bucket Digging Force per SAEJ49 (lbs.) w/bucket Cylinder: 2,194 w/dipperstick Cylinder: 1332 IMPORTANT INFORMATION The tractor must be equipped with a 100LC front end loader when installing a 905GBL Backhoe. Note: Mid-mount mower is compatible with backhoe installed. WARRANTY New Holland Standard Warranty Applies Shipping Weight (lbs.): 707 Page 4 of 110 -CP2E JAN-18

6 -CP2E GBL BACKHOE FOR WM25S ONLY Models COMMERCIAL MODEL Weight Factory Data List Price 905GBL 707 LB P46 $4, Page 5 of 110 -CP2E JAN-18

7 -CP2E GBL BACKHOE FOR WM25S ONLY Factory Supplied Attachments Order Code Description Weight Factory Data List Price TRENCHING 9IN 3 TEETH BUCKET 46 LB P20 $ TRENCHING 12IN 3 TEETH BUCKET 56 LB P70 $ TRENCHING 16IN 3 TEETH BUCKET 64 LB P20 $ TRENCHING 18IN 3 TEETH 75 LB P80 $ Page 6 of 110 -CP2E JAN-18

8 -CP2E GBL BACHHOE FOR WM25 ONLY Standard Equipment BACKHOE MODEL: 910GBL ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: Current New Holland Compact Models 910GBL backhoe Package includes: - WORKMASTER 25 - Basic Packaged Backhoe - Subframe NOTE: 910GBL is only compatible with - Hydraulic Kit the WORKMASTER 25 compact - 12" Bucket Specifications: Transport Height (in.): 77.2 Loading Height (in.): 63.6 Overall Width (in.): 53.3 Ground Clearance (in.): 14.4 Maximum Digging Depth (in.): 76.4 Reach from Centerline of Swing Pivot (in.): Swing Arc (deg.): 180 Bucket Rotating (deg.): 180 Stabilizer Spread (Down) (in.): 68.7 Stabilizer Spread (Up) (in.): 46.5 Bucket Digging Force per SAEJ49 (lbs.) w/bucket Cylinder: 2817 w/dipperstick Cylinder: 1748 IMPORTANT INFORMATION The tractor must be equipped with a 200LC front end loader when installing a 910GBL Backhoe. Note: Mid-mount mower is NOT compatible with backhoe installed. WARRANTY New Holland Standard Warranty Applies Shipping Weight (lbs.): 1092 Page 7 of 110 -CP2E JAN-18

9 -CP2E GBL BACHHOE FOR WM25 ONLY Models COMMERCIAL MODEL Weight Factory Data List Price 910GBL 1,092 LB P30 $7, Page 8 of 110 -CP2E JAN-18

10 -CP2E GBL BACHHOE FOR WM25 ONLY Factory Supplied Attachments Order Code Description Weight Factory Data List Price TRENCHING 9IN 3 TEETH BUCKET 46 LB P20 $ TRENCHING 12IN 3 TEETH BUCKET 56 LB P70 $ TRENCHING 16IN 3 TEETH BUCKET 64 LB P20 $ TRENCHING 18IN 3 TEETH 75 LB P80 $ Page 9 of 110 -CP2E JAN-18

11 -CP2C GBH BACKHOE (Telford, TN) Standard Equipment BACKHOE MODEL: 915GBH ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: The following items are required to Current New Holland Compact Models make up a complete backhoe: - Boomer 24 - Basic Packaged Backhoe - Subframe (one required) Prior New Holland Compact Models - Hydraulic Kit (one required) - Boomer 20 / 25 - Bucket (one required) - Optional Equipment *SPECIFICATIONS: Digging Depth (in.) IMPORTANT INFORMATION Reach from Swing Pivot (in.) The tractor must be equipped with a Transport Height - 70 (in.) front end loader or front mount blade Bucket Rotation when installing a 900 Series backhoe. Stabilizer Spread: Transport - 44 (in.) Note: Mid-mount mower is not Operating - 72 (in.) compatible with backhoe installed. Loading Height 66 (in.) Swing Arc WARRANTY Bucket Digging Forces (lbs.) New Holland Standard Warranty Applies Dipper Stick Digging Forces (lbs.) Operating Pressure psi Shipping Weight (lbs.) *Specifications vary with tractor model, hydraulic system, tire size, etc. Page 10 of 110 -CP2C JAN-18

12 -CP2C GBH BACKHOE (Telford, TN) Standard Equipment Models COMMERCIAL MODEL Weight Factory Data List Price 915GBH 1,065 LB P90 $7, Factory Supplied Options Order Code Description Weight Factory Data List Price BACKHOE OPTIONS SUBFRAMES SD_N5701 HITCH AND SUBFRAME Subframe Cls 1 20/25 For Boomer 20/25 & 24 ( ) No Charge HYDRAULICS SD_20102 HYDRAULIC KIT Hyd Kit For Boomer 20/25 & 24 ( ) No Charge BUCKETS SD_N IN STD BUCKET BUCKETS In./305mm Standard Bucket ( GBH) ( GBH / 935GBH) SD_N IN STD BUCKET In. Standard Bucket ( GBH) ( GBH / 935GBH) P68 $ P14 $ Page 11 of 110 -CP2C JAN-18

13 -CP2C GBH BACKHOE (Telford, TN) SD_N IN STD BUCKET In. Standard Bucket ( GBH) P90 $ OTHER SD_50092 RUBBER STREET PADS Rubber Street Pads For 915GBH, 925GBH & 935GBH ( ) P22 $ SD_N6413 MECH THUMB Mechanical Thumb ( GBH) ( GBH) P46 $ Page 12 of 110 -CP2C JAN-18

14 -CP2C GBH BACKHOE (Telford, TN) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Factory Supplied Attachments IN STD BCKT 2 TEETH 46 LB P90 $ IN STD BCKT 3 TEETH 75 LB P68 $ IN STD BCKT 3 TEETH 77 LB P14 $ MECHANICAL THUMB 915GB 30 LB P46 $ Rubber Street Pads 4 LB P22 $ S-FRM CLS1 Subframe for Boomer 20/25 & HYD KIT CLS1 LS J SER B-HOE Hydraulic kit for Boomer 20/25 & LB P18 $ LB P78 $ Page 13 of 110 -CP2C JAN-18

15 -CP2C GBH BACKHOE (Telford, TN) Standard Equipment BACKHOE MODEL: 925GBH ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: The following items are required to Current New Holland Compact Models make up a complete backhoe: - Boomer 35/40/45/50/55 ROPS (T4B) - Basic Packaged Backhoe - Boomer 40/45/50/55 Cab (T4B) - Subframe (one required) - Boomer 46D/54D CVT - Hydraulic Kit (one required) - Boomer 45D/50D CVT (Canada Only) - Bucket (one required) - WORKMASTER 35/40 (T4B) - Optional Equipment Prior New Holland Compact Models IMPORTANT INFORMATION - Boomer 33/37/41/47 ROPS (T4B) The tractor must be equipped with a - Boomer 37/41/47 Cab (T4B) front end loader or front mount blade - Boomer CVT 3040/3045/3050 when installing a 900 Series backhoe. - WORKMASTER 33/37 (T4B) - WORKMASTER 35/40 (T3) Note: Mid-mount mower is not - Boomer 30/35/40/50 (T3) compatible with backhoe installed. *SPECIFICATIONS: Digging Depth - 92 (in.) Reach from Swing Pivot (in.) Transport Height - 77 (in.) Bucket Rotation Stabilizer Spread: Transport - 49 (in.) Operating (in.) Loading Height 70 (in.) Swing Arc Bucket Digging Forces (lbs.) Dipper Stick Digging Forces (lbs.) Operating Pressure psi Shipping Weight (lbs.) WARRANTY New Holland Standard Warranty Applies *Specifications may vary with tractor model, hydraulic system, tire size, etc. Page 14 of 110 -CP2C JAN-18

16 -CP2C GBH BACKHOE (Telford, TN) Standard Equipment Models COMMERCIAL MODEL Weight Factory Data List Price 925GBH 1,065 LB P90 $7, Factory Supplied Options Order Code Description Weight Factory Data List Price FAST PICK CONFIGURATION SD_T9981 CONFIGURATION XT9981X Less Fast Pick Config X0341XX WM 35 Gear R1 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for WORKMASTER 35 (T4B) Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) X0337XX WM 35 Gear R4 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for WORKMASTER 35 (T4B) Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) No Charge (900147P60) ($180.00) (900147P60) ($180.00) Page 15 of 110 -CP2C JAN-18

17 -CP2C GBH BACKHOE X0338XX WM 40 HST R4 Fast Pick (Telford, TN) FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for WORKMASTER 40 (T4B) Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) X0331XX BMR 40 Cab Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for Boomer 40 Cab (T4B) Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) (900147P60) ($180.00) (900147P60) ($180.00) X0332XX BMR 50 ROPS Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for Boomer 50 ROPS (T4B) Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) X0333XX BMR 50 Cab Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for Boomer 50 Cab T4B Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) X0279XX WRKMSTR 33 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for WORKMASTER 33 Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) (900147P60) ($180.00) (900147P60) ($180.00) (900147P60) ($180.00) Page 16 of 110 -CP2C JAN-18

18 -CP2C GBH BACKHOE (Telford, TN) X0280XX WRKMSTR 37 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for WORKMASTER 37 Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) (900147P60) ($180.00) X0275XX BMR 37 Cab Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for Boomer 37 Cab Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) (900147P60) ($180.00) X0282XX BMR 47 Rops Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for Boomer 47 ROPs Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) (900147P60) ($180.00) X0276XX BMR 47 Cab Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for Boomer 47 Cab Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) (900147P60) ($180.00) X0281XX BMR 54D Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 925GBH Backhoe Package for Boomer 54D CVT Cab Package Contains: (Subframe) (Hydraulic Kit) (18" Bucket) (Mechanical Thumb) (900147P60) ($180.00) Page 17 of 110 -CP2C JAN-18

19 -CP2C GBH BACKHOE (Telford, TN) BACKHOE OPTIONS SUBFRAMES SD_N5701 HITCH AND SUBFRAME S-FRM CL2 T4 ROP/CAB For Boomer COMPACT 33/37 ROPS & 37 CAB (T4B) ( ) S-FRM CL3 T4 ROP/CAB For Boomer COMPACT ( ) - 41/47 ROPS/CAB (T4B) - 45/50/55 ROPS/CAB (T4B) S-FRM CLS2 LS ENG T4 For Boomer Compact ( ) - 35 and 40 ROPS (T4B) - 40 Cab (T4B) S-FRM CLS2 LS For WORKMASTER COMPACT 35/40 (T4B) ( ) Subframe CL2 For WORKMASTER COMPACT 33/37 (T4B) ( ) Front Quick Hitch - Class 3 For Boomer CVT (Tier 3 & Tier 4) ( ) Fits All Boomer 3000 Tractors (New Axle only), Boomer 46D/54D & Boomer 45D/50D (Canada Only) Subframe Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) ( ) No Charge No Charge No Charge No Charge No Charge No Charge No Charge HYDRAULICS SD_20102 HYDRAULIC KIT HYD KIT CL2 33/37 For WORKMASTER COMPACT ( ) - 33/37 (T4B) - 35/40 (T4B) HYD CLS2 T4 ROPS/CAB For Boomer COMPACT ( ) - 33/37 ROPS & 37 CAB (T4B) - 35/40 ROPS & 40 CAB (T4B) HYD CLS3 T4 ROPS/CAB For Boomer COMPACT ( ) - 41/47 ROPS/CAB (T4B) - 45/50/55 ROPS/CAB (T4B) Hyd Kit Cls 3 CVT For Boomer CVT 3040/3045/3050/45D/46D/50D/54D ( ) Hyd Kit Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) ( ) No Charge No Charge No Charge No Charge No Charge Page 18 of 110 -CP2C JAN-18

20 -CP2C GBH BACKHOE HYD Kit CL2 30/35 HP For Boomer 30/35 (T3 ONLY) ( ) (Telford, TN) No Charge BUCKETS SD_N IN STD BUCKET In./305mm Standard Bucket ( GBH) ( GBH / 935GBH) P68 $ SD_N IN STD BUCKET In. Standard Bucket ( GBH) ( GBH / 935GBH) P14 $ SD_N IN STD BUCKET In./457mm Standard Bucket ( GBH / 935GBH) P18 $ SD_N IN STD BUCKET In. Standard Bucket ( GBH & 935GBH ) P78 $ OTHER SD_50005 BIG FOOT DIRT PADS Big Foot Dirt Pads For 925GBH / 935GBH ONLY ( ) P82 $ SD_50092 RUBBER STREET PADS Rubber Street Pads For 915GBH, 925GBH & 935GBH ( ) P22 $ SD_N5702 FRONT BRACKETS Fr Hanger Brkt Cls 2 Front Hanger Kit for Boomer 30 & 35 (T3) - Must be used with (Boomer 33/37 subframe) to allow Tier 4 subframe to fit Tier 3 units. ( ) Fr Hanger Brkt Cls 3 Front Hanger Kit for Boomer 40 & 50 (T3) - Must be used with (Boomer 41/47 subframe) to allow Tier 4 subframe to fit Tier 3 units. ( ) P82 $ P82 $51.00 SD_N6413 MECH THUMB Mechanical Thumb ( GBH) ( GBH) P46 $ Page 19 of 110 -CP2C JAN-18

21 -CP2C GBH BACKHOE (Telford, TN) Factory Supplied Attachments Order Code Description Weight Factory Data List Price In 3 Teeth 1.02 Cu. Ft Heaped Std/ LB P68 $ In 4 Teeth 1.38 Cu. Ft Heaped Std/ LB P14 $ In 4 Teeth 1.57 Cu. Ft Heaped Std/ LB P18 $ In 4 Teeth 2.13 Cu. Ft Heaped Std/ LB P78 $ Rubber Street Pads 4 LB P22 $ Big Foot Dirt Pads 52 LB P82 $ Mechanical Thumb Class Ft 90 LB P46 $ SUBFRAME CLS 2 35/40 HP ECONOMY For WORKMASTER COMPACT 35/40 (T3 ONLY) HYD KIT CLS 2 35/40 HP ECONOMY T3 For WORKMASTER COMPACT 35/40 (T3 ONLY) HYD KIT CLS 3 CVT MY14 For Boomer CVT 3040/3045/3050/45D/46D/50D/54D HYD KIT CLS2 33/37 HP T4 ECONOMY For WORKMASTER COMPACT - 33/37 (T4B) - 35/40 (T4B) Subframe CLS2 T4 ROPS/CAP For Boomer COMPACT 33/37 ROPS & 37 CAB (T4B) Subframe CLS3 T4 ROPS/CAB For Boomer COMPACT - 41/47 Rops & CAB (T4B) - 45/50/55 Rops & CAB) (T4B) HYD Kit CLS2 T4 ROPS/CAB For Boomer COMPACT - 33/37 ROPS & 37 CAB (T4B) - 35/40 ROPS & 40 CAB (T4B) Hyd Kit CLS3 T4 ROPS/CAB For Boomer COMPACT - 41/47 ROPS & CAB (T4B) - 45/50/55 ROPS & CAB (T4B) SUBFRAME CLS2 LS ENG T4 ROPS/CAB For Boomer Compact - 35 and 40 ROPS (T4B) - 40 Cab (T4B) SUBFRAME CLS2 LS ENG T4 ECON For WORKMASTER COMPACT 35/40 (T4B) SUBFRAME CLS 3 AT Subframe For Boomer CVT (Tier 3 & Tier 4) Fits All Boomer 3000 Tractors (New Axle only), Boomer 46D/54D & Boomer 45D/50D (Canada Only) SUBFRAME CLS 2 33/36 HP T4 For WORKMASTER COMPACT 33/37 (T4B) SUBFRAME CLS 3 40/46 HP T4 For Boomer 46D/54D HYD KIT CLS2 30/35 HP T3 For Boomer COMPACT 30/35 (T3 ONLY) 95 LB P88 $ LB P00 $ LB P00 $ LB P00 $ LB P88 $ LB P88 $ LB P00 $ LB P88 $ LB P88 $ LB P88 $ LB P88 $ LB P88 $ LB P88 $ LB P00 $ Page 20 of 110 -CP2C JAN-18

22 -CP2C GBH BACKHOE (Telford, TN) Standard Equipment BACKHOE MODEL: 935GBH ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATION: The following items are required to Current New Holland Compact Models make up a complete backhoe: - Boomer 35/40/45/50/55 ROPS (T4B) - Basic Packaged Backhoe - Boomer 40/45/50/55 Cab (T4B) - Subframe (one required) - Boomer 46D/54D CVT - Hydraulic Kit (one required) - Boomer 45D/50D CVT (Canada Only) - Bucket (one required) - WORKMASTER 35/40 (T4B) - Optional Equipment - WORKMASTER 50/60/70 (T4B) IMPORTANT INFORMATION Prior New Holland Compact Models The tractor must be equipped with a - Boomer 33/37/41/47 ROPS (T4B) front end loader or front mount blade - Boomer 37/41/47 Cab (T4B) when installing a 900 Series backhoe. - Boomer CVT 3040/3045/ WORKMASTER 33/37 (T4B) Note: Mid-mount mower is not - WORKMASTER 35/40 (T3) compatible with backhoe installed. - Boomer 30/35/40/50 (T3) WARRANTY *SPECIFICATIONS: New Holland Standard Warranty Applies Digging Depth (in.) Reach from Swing Pivot (in.) Transport Height - 88 (in.) Bucket Rotation Stabilizer Spread: Transport - 56 (in.) Operating (in.) Loading Height 76.0 (in.) Swing Arc Bucket Digging Forces (lbs.) Dipper Stick Digging Forces (lbs.) Operating Pressure psi Shipping Weight (lbs). *Specifications vary with tractor model, hydraulic system, tire size, etc. Page 21 of 110 -CP2C JAN-18

23 -CP2C GBH BACKHOE (Telford, TN) Standard Equipment Models COMMERCIAL MODEL Weight Factory Data List Price 935GBH 1,065 LB P26 $8, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAMES SD_N5701 HITCH AND SUBFRAME SUBFRAME 45/55 HP For WORKMASTER UTILITY 45/50/55/60/70 ( ) S-FRM CL2 T4 ROP/CAB For Boomer COMPACT 33/37 ROPS & 37 CAB (T4B) ( ) S-FRM CL3 T4 ROP/CAB For Boomer COMPACT ( ) - 41/47 ROPS/CAB (T4B) - 45/50/55 ROPS/CAB (T4B) S-FRM CLS2 LS ENG T4 For Boomer Compact ( ) - 35 and 40 ROPS (T4B) - 40 Cab (T4B) S-FRM CLS2 LS For WORKMASTER COMPACT 35/40 (T4B) ( ) Subframe CL2 For WORKMASTER COMPACT 33/37 (T4B) ( ) Front Quick Hitch - Class 3 For Boomer CVT (Tier 3 & Tier 4) ( ) Fits All Boomer 3000 Tractors (New Axle only), Boomer 46D/54D & Boomer 45D/50D (Canada Only) Subframe Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) ( ) No Charge No Charge No Charge No Charge No Charge No Charge No Charge No Charge Page 22 of 110 -CP2C JAN-18

24 -CP2C GBH BACKHOE (Telford, TN) HYDRAULICS SD_20102 HYDRAULIC KIT HYD KIT CL2 33/37 For WORKMASTER COMPACT ( ) - 33/37 (T4B) - 35/40 (T4B) HYD CLS2 T4 ROPS/CAB For Boomer COMPACT ( ) - 33/37 ROPS & 37 CAB (T4B) - 35/40 ROPS & 40 CAB (T4B) HYD CLS3 T4 ROPS/CAB For Boomer COMPACT ( ) - 41/47 ROPS/CAB (T4B) - 45/50/55 ROPS/CAB (T4B) Hyd Kit WM/FA For WORKMASTER 45/50/55/60/70 ( ) Hyd Kit Cls 3 CVT For Boomer CVT 3040/3045/3050/45D/46D/50D/54D ( ) Hyd Kit Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) ( ) HYD Kit CL2 30/35 HP For Boomer 30/35 (T3 ONLY) ( ) No Charge No Charge No Charge No Charge No Charge No Charge No Charge BUCKETS SD_N IN STD BUCKET In./305mm Standard Bucket ( GBH) ( GBH / 935GBH) P68 $ SD_N IN STD BUCKET In. Standard Bucket ( GBH) ( GBH / 935GBH) P14 $ SD_N IN STD BUCKET In./457mm Standard Bucket ( GBH / 935GBH) P18 $ SD_N IN STD BUCKET In. Standard Bucket ( GBH & 935GBH ) P78 $ Page 23 of 110 -CP2C JAN-18

25 -CP2C GBH BACKHOE (Telford, TN) OTHER SD_50005 BIG FOOT DIRT PADS Big Foot Dirt Pads For 925GBH / 935GBH ONLY ( ) P82 $ SD_50092 RUBBER STREET PADS Rubber Street Pads For 915GBH, 925GBH & 935GBH ( ) P22 $ SD_N5702 FRONT BRACKETS Fr Hanger Brkt Cls 2 Front Hanger Kit for Boomer 30 & 35 (T3) - Must be used with (Boomer 33/37 subframe) to allow Tier 4 subframe to fit Tier 3 units. ( ) Fr Hanger Brkt Cls 3 Front Hanger Kit for Boomer 40 & 50 (T3) - Must be used with (Boomer 41/47 subframe) to allow Tier 4 subframe to fit Tier 3 units. ( ) P82 $ P82 $51.00 SD_N6413 MECH THUMB Mechanical Thumb Class 3 ( GBH) P46 $ Page 24 of 110 -CP2C JAN-18

26 -CP2C GBH BACKHOE (Telford, TN) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Factory Supplied Attachments In 3 Teeth 1.02 Cu. Ft Heaped Std/ LB P68 $ In 4 Teeth 1.38 Cu. Ft Heaped Std/ LB P14 $ In 4 Teeth 1.57 Cu. Ft Heaped Std/ LB P18 $ In 4 Teeth 2.13 Cu. Ft Heaped Std/ LB P78 $ Rubber Street Pads 4 LB P22 $ Big Foot Dirt Pads 52 LB P82 $ Mechanical Thumb Class Ft 90 LB P46 $ SUBFRAME CLS 2 35/40 HP ECONOMY For WORKMASTER COMPACT 35/40 (T3 ONLY) HYD KIT CLS 2 35/40 HP ECONOMY T3 For WORKMASTER COMPACT 35/40 (T3 ONLY) HYD KIT CLS 3 CVT MY14 For Boomer CVT 3040/3045/3050/45D/46D/50D/54D SUBFRAME 45/55 HP For WORKMASTER UTILITY 45/50/55/60/ HYD KIT CLS2 33/37 HP T4 ECONOMY For WORKMASTER COMPACT - 33/37 (T4B) - 35/40 (T4B) Subframe CLS2 T4 ROPS/CAP For Boomer COMPACT 33/37 ROPS & 37 CAB (T4B) Subframe CLS3 T4 ROPS/CAB For Boomer COMPACT - 41/47 Rops & CAB (T4B) - 45/50/55 Rops & CAB) (T4B) HYD Kit CLS2 T4 ROPS/CAB For Boomer COMPACT - 33/37 ROPS & 37 CAB (T4B) - 35/40 ROPS & 40 CAB (T4B) Hyd Kit CLS3 T4 ROPS/CAB For Boomer COMPACT - 41/47 ROPS & CAB (T4B) - 45/50/55 ROPS & CAB (T4B) SUBFRAME CLS2 LS ENG T4 ROPS/CAB For Boomer Compact - 35 and 40 ROPS (T4B) - 40 Cab (T4B) SUBFRAME CLS2 LS ENG T4 ECON For WORKMASTER COMPACT 35/40 (T4B) SUBFRAME CLS 3 AT Subframe For Boomer CVT (Tier 3 & Tier 4) Fits All Boomer 3000 Tractors (New Axle only), Boomer 46D/54D & Boomer 45D/50D (Canada Only) HYD KIT F/WORKMASTER 45/55 HP For WORKMASTER UTILITY 45/50/55/60/70 95 LB P88 $ LB P00 $ LB P00 $ LB P88 $ LB P00 $ LB P88 $ LB P88 $ LB P00 $ LB P88 $ LB P88 $ LB P88 $ LB P88 $ LB P88 $ Page 25 of 110 -CP2C JAN-18

27 -CP2C GBH BACKHOE SUBFRAME CLS 2 33/36 HP T4 For WORKMASTER COMPACT 33/37 (T4B) SUBFRAME CLS 3 40/46 HP T4 For Boomer 46D/54D HYD KIT CLS2 30/35 HP T3 For Boomer COMPACT 30/35 (T3 ONLY) (Telford, TN) 95 LB P88 $ LB P88 $ LB P00 $ Page 26 of 110 -CP2C JAN-18

28 -CP1L 01 60RBH FRONT MOUNT BLADES (FOR WM25S) (Thetford Mines, Quebec) Standard Equipment 60RBHB Front Mount Blade - QA ******************************* SEE COMPATIBILITY GUIDE FOR The following items are required to IMPLEMENT COMPATIBILITY make up a complete front mount blade: ******************************* - Packaged Front Mount Blade - Hitch and Subframe TRACTOR APPLICATIONS: Current New Holland Compact Models NOTE: The WORKMASTER 25S comes - WORKMASTER 25S (Subcompact) standard with a mid-mount valve. SPECIFICATIONS: Moldboard Width - 60 (in.) Moldboard Height /8 (in.) Reversible Cutting Edge - Standard Cutting Edge Thickness - 1/2 (in.) Manual Angling - N/A Hydraulic Angling - Standard Angling Range - 0 to 30 degrees Note: Only One - Quick Hitch/Subframe - Mid PTO Drive kit per tractor needed for Blade, Broom, and/or Blower head units New Holland recommends the use of a ballasting box when installing front mounted implements. WARRANTY New Holland Standard Warranty Applies SHIPPING POINT: Thetford Mines, Quebec, Canada Page 27 of 110 -CP1L JAN-18

29 -CP1L 01 60RBH FRONT MOUNT BLADES (FOR WM25S) (Thetford Mines, Quebec) Models COMMERCIAL MODEL Weight Factory Data List Price 60RBHB 311 LB P06 $1, Factory Supplied Options Order Code Description Weight Factory Data List Price ATTACHMENT SECTION REQUIRED OPTIONS SD_N5701 HITCH AND SUBFRAME SUBFRAME LS For WORKMASTER 25S ( ) P60 $ Page 28 of 110 -CP1L JAN-18

30 -CP1L 01 60RBH FRONT MOUNT BLADES (FOR WM25S) (Thetford Mines, Quebec) Factory Supplied Attachments Order Code Description Weight Factory Data List Price MOUNTING FRAME For WORKMASTER 25S ( ) 80 LB P60 $ Page 29 of 110 -CP1L JAN-18

31 -CP1L 02 60CBH FRONT MOUNT BLADES (Thetford Mines, Quebec) Standard Equipment 60CBHA Front Mount Blade - QA ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: Current New Holland Compact Models The following items are required to - Boomer 24 make up a complete front mount blade: - Packaged Front Mount Blade - Hitch and Subframe Prior New Holland Compact Models - Mid-Mount Valve for tractor - Boomer 20 / 25 - Optional Equipment can be added as desired. SPECIFICATIONS: Moldboard Width - 60 (in.) NOTE: If tractor does not have a mid- Moldboard Height - 22 (in.) mount valve, see tractor DIA pages to Reversible Cutting Edge - Standard order mid-mount valve. Cutting Edge Thickness - 1/2 (in.) Manual Angling - N/A New Holland recommends the use of a Hydraulic Angling - Standard ballasting box when installing front Angling Range - 0 to 30 degrees mounted implements. Adjustable Skid Shoes - Standard WARRANTY New Holland Standard Warranty Applies SHIPPING POINT: Thetford Mines, Quebec, Canada Page 30 of 110 -CP1L JAN-18

32 -CP1L 02 60CBH FRONT MOUNT BLADES (Thetford Mines, Quebec) Models COMMERCIAL MODEL Weight Factory Data List Price 60CBHA 311 LB P78 $2, Factory Supplied Options Order Code Description Weight Factory Data List Price Subframe Cls 1 20/25 For Boomer 24 & Boomer 20/ P46 $1, Page 31 of 110 -CP1L JAN-18

33 -CP1L 02 60CBH FRONT MOUNT BLADES (Thetford Mines, Quebec) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Hitch and Subframe Hitch Subframe Boomer 20/25 For Boomer 24 & Boomer 20/25 Ballast Box Ballast Box 500 Lb Max 0.5, LB Max (Class.5,.75, 1, & 2 compact tractors) 218 LB P46 $1, LB P62 $ Page 32 of 110 -CP1L JAN-18

34 -CP1L 04 72CBH FRONT MOUNT BLADES (Thetford Mines, Quebec) Standard Equipment 72CBHA Front Mount Blade - QA ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: The following items are required to Current New Holland Compact Models make up a complete front mount blade: - Boomer 35/40/45/50/55 ROPS (T4B) - Packaged Front Mount Blade - Boomer 40/45/50/55 Cab (T4B) - Quick Hitch and Subframe - Boomer 46D/54D CVT - Mid-mount valve for tractor - Boomer 45D/50D CVT (Canada Only) - Optional Equipment can be added - WORKMASTER 25/35/40 (T4B) as desired. Prior New Holland Compact Models Hydraulic Valve Kit Shipping Point - Boomer 33/37/41/47 ROPS (T4B) Service Parts - Boomer 37/41/47 Cab (T4B) - Boomer CVT 3040/3045/3050 Boomer 35/40/45/50/55 (T4B) and - WORKMASTER 35/40 (T3) 33/37/41/47 (T4B) - WORKMASTER 33/37 (T4B) NOTE: If tractor does not have - Boomer 30/35/40/50 (T3) couplers (ordered without loader), Coupler Kit # must be SPECIFICATIONS: ordered Moldboard Width - 72 (in.) Moldboard Height - 22 (in.) NOTE: A cross-over relief valve is Reversible Cutting Edge - Standard required to operate the 72CBHA front Cutting Edge Thickness - 1/2 (in.) blade on a Boomer 30, 35, 40, or 50 Manual Angling - N/A (T3) and WORKMASTER 35, 40 (T3) Hydraulic Angling - Standard Angling Range - 0 to 30 degrees (Order through Service Parts) Adjustable Skid Shoes - Standard BERBER Cross-over relief valve kit New Holland recommends the use of a ballasting box when installing front mounted implements. WARRANTY New Holland Standard Warranty Applies SHIPPING POINT: Thetford Mines, Quebec, Canada Page 33 of 110 -CP1L JAN-18

35 -CP1L 04 72CBH FRONT MOUNT BLADES (Thetford Mines, Quebec) Models COMMERCIAL MODEL Weight Factory Data List Price 72CBHA 535 LB P68 $2, Factory Supplied Options Order Code Description Weight Factory Data List Price S-FRM CLS2 LS For COMPACT ( ) Current Models - Boomer 35/40 ROPS (T4B) - Boomer 40 CAB (T4B) - Boomer 45/50/55 ROPS (T4B) - Boomer 45/50/55 CAB (T4B) - WORKMASTER 35/40 (T4B) Prior models - Boomer 33/37 ROPS (T4B) - Boomer 37 Cab (T4B) - *Boomer 41/47 ROPS (T4B) - *Boomer 41/47 CAB (T4B) - WORKMASTER 33/37 (T4B) P04 $1, * Front mount completion hanger must also be ordered Front Quick Hitch 30/35/40/50 For Boomer 30/35/40/50 (T3 ONLY) ( ) (CURRENT INVENTORY ONLY) P04 $1, A cross-over relief valve is required to operate the 72CBH front blade on a Boomer 30/35/40/50 (T3 ONLY) BERBER Cross-over relief valve kit (Order through Service Parts) Does Not fit: Boomer 33/37/41/ Front Quick Hitch - Class 3 For Boomer EasyDrive CVT Models ( ) Conventional Axle Only: Serial ZDMB11924 and below S-Frame CLS3AT MY14 For Boomer EasyDrive CVT Models ( ) Conventional Axle Only: Serial ZDMB11925 and above & Tier IV P64 $2, P64 $2, Page 34 of 110 -CP1L JAN-18

36 -CP1L 04 72CBH FRONT MOUNT BLADES Subframe Economy (Thetford Mines, Quebec) For WORKMASTER 35/40 Compact tractors (T3 ONLY) ( ) P04 $1, A cross-over relief valve is required to operate the 72CBH front blade on a WORKMASTER 35/40 (T3) BERBER Cross-over relief valve kit (Order through Service Parts) SD_N5702 FRONT BRACKETS FR MNT HANGER BRCKT (006) Front mount completion hanger is required for Boomer 41/47 (T4B) ROPS and CAB applications No Charge Page 35 of 110 -CP1L JAN-18

37 -CP1L 04 72CBH FRONT MOUNT BLADES (Thetford Mines, Quebec) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Hitch and Subframe SUBFRAME 30/35/40/50 HP For Boomer 30/35/40/50 (T3 ONLY) (CURRENT INVENTORY ONLY) A cross-over relief valve is required to operate the 72CBH front blade on a Boomer 30/35/40/50 (T3 ONLY) BERBER Cross-over relief valve kit (Order through Service Parts) SUBFRAME CLS 3 For Boomer EasyDrive CVT Models Conventional Axle Only: Serial ZDMB11924 and below Subframe 35/40 HP Economy For WORKMASTER 35/40 Compact tractors (T3 ONLY) ( ) A cross-over relief valve is required to operate the 72CBH front blade on a WORKMASTER 35/40 (T3 ONLY) BERBER Cross-over relief valve kit (Order through Service Parts) Hitch and Sub Frame 325 KG P04 $1, LB P64 $2, LB P04 $1, KG P64 $2, For Boomer EasyDrive CVT Models ( ) Conventional Axle Only: Serial ZDMB11925 and above & Tier IV SUBFRAME CLS2 LS ENG T4 ECON PREM ROPS/C For COMPACT ( ) Current Models - Boomer 35/40 ROPS (T4B) - Boomer 40 CAB (T4B) - Boomer 45/50/55 ROPS (T4B) - Boomer 45/50/55 CAB (T4B) - WORKMASTER 35/40 (T4B) Prior models - Boomer 33/37 ROPS (T4B) - Boomer 37 Cab (T4B) - *Boomer 41/47 ROPS (T4B) - *Boomer 41/47 CAB (T4B) - WORKMASTER 33/37 (T4B) 360 LB P04 $1, * Front mount completion hanger must also be ordered Ballast Box Ballast box 1000 Lb Max (Category I) 1000 LB MAX (Class III compact tractors) 169 LB P26 $ Page 36 of 110 -CP1L JAN-18

38 -CP1L 04 72CBH FRONT MOUNT BLADES (Thetford Mines, Quebec) FR MNT COMPLETION HANGER (006) Front mount completion hanger is required for Boomer 41/47 (T4B) ROPS and CAB applications 20 LB P00 $ Page 37 of 110 -CP1L JAN-18

39 -CP1C 01 MODEL 526GR FRONT MOUNT ROTARY BROOM (Thetford Mines, Quebec, Canada) Standard Equipment 526GR(B) FRONT MOUNT BROOM (Reverse Drive Rotation) ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: The following items are required to Current New Holland Compact Models make up a complete front mount rotary - Boomer 24 broom: - Packaged Front Mount Rotary Broom Prior New Holland Compact Models - Mid PTO Drive Kit - Boomer 20 / 25 - Hitch and Subframe - Hydraulic Valve Kit for tractor Note: 526GR previously ordered for (See Tractor Service Part pages) T1110 / Boomer 1030 will not work - Optional Equipment can be added as on the Boomer 20/25 & 24 because the desired mid-pto turns in the opposite direction. Note: Only One SPECIFICATIONS: - Quick Hitch/Subframe Sweeping Width - 55 (in.) - Mid PTO Drive kit Sweeping (in.) - Hydraulic Valve Kit Broom Diameter - 18 (in.) per tractor needed for Blade, Broom, Bristle Material - Polypropylene and/or Blower head units Brush Type - Wafer Manual Angling - Standard New Holland recommends the use of a Angling Range - 0 to 25 ballasting box when installing front Drive System - PTO/ Gearbox mounted implements. #40 Chain Storage Stand - Standard SHIPPING POINT: Thetford Mines, Quebec, Canada WARRANTY: New Holland Standard Warranty Applies Page 38 of 110 -CP1C JAN-18

40 -CP1C 01 MODEL 526GR FRONT MOUNT ROTARY BROOM (Thetford Mines, Quebec, Canada) Models COMMERCIAL MODEL Weight Factory Data List Price 526GR 425 LB P74 $4, Factory Supplied Options Order Code Description Weight Factory Data List Price COMPLETING PACKAGES ROTARY BROOM OPTIONS SD_03007 MID PTO DRIVE KIT Mid PTO CLS 1 20/25 For Boomer 24 & Boomer 20/25 ( ) P06 $ SD_N5701 HITCH AND SUBFRAME Hitch and Subframe Subframe Cls 1 20/25 For Boomer 24 & Boomer 20/25 ( ) P46 $1, OPTIONAL EQUIPMENT ROTARY BROOM OPTIONS SD_20087 HYDRAULIC FRAME ANGLING KIT HYD ANGLE CLS1 20/25 For Boomer 24 & Boomer 20/25 ( ) P18 $ SD_29035 SIDE CASTER WHEEL KIT Side Casterwheels Kit ( ) - 526GR ( ) - 72CO 47 LB P04 $ Page 39 of 110 -CP1C JAN-18

41 -CP1C 01 MODEL 526GR FRONT MOUNT ROTARY BROOM (Thetford Mines, Quebec, Canada) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Hitch and Subframe Hitch Subframe Boomer 20/25 For Boomer 24 & Boomer 20/25 ( ) 218 LB P46 $1, MidPTO Drive Kit Boomer 20/25 For Boomer 24 & Boomer 20/25 ( ) Optional Equipment "X6" SIDE CASTER WHL KIT 6" X 3" on 526GR Hydraulic Angling Kit Boomer 20/25 For Boomer 24 & Boomer 20/25. For 526GR Ballast Box Ballast Box 500 Lb Max 0.5, LB Max (Class.5,.75, 1, & 2 compact tractors) 18 LB P06 $ LB P94 $ LB P18 $ LB P62 $ Page 40 of 110 -CP1C JAN-18

42 -CP1C 02 60COBB FRONT MOUNT ROTARY BROOM (WM25S) (Thetford Mines, Quebec, Canada) Standard Equipment 60COBB FRONT MOUNT BROOM ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: The following items are required to Current New Holland Compact Models make up a complete front mount rotary - WORKMASTER 25S (subcompact) broom: - Packaged Front Mount Rotary Broom SPECIFICATIONS: - Mid PTO Drive Kit Sweeping Width - 57 (in.) - Hitch and Subframe Sweeping (in.) Broom Diameter - 18 (in.) NOTE: The WORKMASTER 25S comes Bristle Material - Nylon standard with a mid-mount valve. Brush Type - Wafer Hydraulicl Angling - Standard Note: Only One Angling Range - 0 to 25 - Quick Hitch/Subframe Drive System - PTO/ Gearbox - Mid PTO Drive kit #40 Chain per tractor needed for Blade, Broom, Storage Stand - Standard and/or Blower head units New Holland recommends the use of a ballasting box when installing front mounted implements. SHIPPING POINT: Thetford Mines, Quebec, Canada WARRANTY: New Holland Standard Warranty Applies Page 41 of 110 -CP1C JAN-18

43 -CP1C 02 60COBB FRONT MOUNT ROTARY BROOM (WM25S) (Thetford Mines, Quebec, Canada) Models COMMERCIAL MODEL Weight Factory Data List Price 60COBB 425 LB P70 $2, Factory Supplied Options Order Code Description Weight Factory Data List Price COMPLETING PACKAGES ROTARY BROOM OPTIONS SD_03007 MID PTO DRIVE KIT MID PTO DRIVE KIT LS For WORKMASTER 25S ( ) P60 $ SD_N5701 HITCH AND SUBFRAME SUBFRAME LS For WORKMASTER 25S ( ) P60 $ Page 42 of 110 -CP1C JAN-18

44 -CP1C 02 60COBB FRONT MOUNT ROTARY BROOM (WM25S) (Thetford Mines, Quebec, Canada) Factory Supplied Attachments Order Code Description Weight Factory Data List Price MOUNTING FRAME For WORKMASTER 25S ( ) PTO KIT For WORKMASTER 25S ( ) 80 LB P60 $ LB P60 $ Page 43 of 110 -CP1C JAN-18

45 -CP1C 03 MODELS 72CO FRONT MOUNT ROTARY BROOM (Thetford Mines, Quebec, Canada) Standard Equipment 72COBA Front Mount Broom - QA 72COBB Front Mount Broom - QA Drive System - PTO/ Gearbox Storage Stand - Standard ******************************* SEE COMPATIBILITY GUIDE FOR The following items are required to IMPLEMENT COMPATIBILITY make up a complete front mount rotary ******************************* broom: - Packaged Front Mount Rotary Broom TRACTOR APPLICATIONS: 72COBA - Quick Hitch and Subframe Current New Holland Compact Models - Mid-PTO Drive Kit - Boomer 46D/54D CVT - Hydraulic Valve Kit for tractor - Boomer 45D/50D CVT (Canada Only) - Optional Equipment can be added as Requires Factory installed Mid PTO desired Prior New Holland Compact Models Note: Only One - Boomer CVT 3040/3045/ Quick Hitch/Subframe Requires Factory installed Mid PTO - Mid PTO Drive kit - Hydraulic Valve Kit TRACTOR APPLICATIONS: 72COBB per tractor needed for Blade, Broom, Current New Holland Compact Models and/or Blower head units - Boomer 35/40/45/50/55 ROPS (T4B) - Boomer 40/45/50/55 Cab (T4B) Boomer 35/40/45/50/55 (T4B) - WORKMASTER 35/40 (T4B) 33/37/41/47 (T4B) NOTE: If tractor does not have couplers Prior New Holland Compact Models (ordered without loader), Coupler Kit # - WORKMASTER 35/40 (T3) must be ordered - WORKMASTER 33/37 (T4B) - Boomer 30/35/40/50 (T3) New Holland recommends the use of a - Boomer 33/37/41/47 (T4B) ballasting box when installing front mounted implements. SPECIFICATIONS: Sweeping Width - 68 (in.) SHIPPING POINT Sweeping (in.) Thetford Mines, Quebec, Canada Broom Diameter - 22 (in.) Bristle Material - Polypropylene WARRANTY Brush Type - Wafer New Holland Standard Warranty Applies Hydraulic Angling - Standard Angling Range - 0 to 25 Page 44 of 110 -CP1C JAN-18

46 -CP1C 03 MODELS 72CO FRONT MOUNT ROTARY BROOM (Thetford Mines, Quebec, Canada) Models COMMERCIAL MODEL Weight Factory Data List Price 72COBA 575 LB P60 $5, COBB 450 LB P60 $5, Factory Supplied Options Order Code Description Weight Factory Data List Price SD_03007 MID PTO DRIVE KIT Mid PTO Tier 4 41/47 For Boomer ( ) - 41/47 ROPS/Cab (T4B) - 45/50/55 ROPS/Cab (T4B) Mid PTO 32/36 HP T3 For Boomer ( ) - 33/37 ROPS, Boomer 37 CAB (T4B) For WORKMASTER - 33/37 ROPS (T4B) P84 $1, P84 $1, MID PTO CLS For Boomer ( ) - 35/40 ROPS, Boomer 40 CAB (T4B) For WORKMASTER - 35/40 ROPS (T4B) P84 $1, Mid PTO 30/35/40/50 Mid PTO for Boomer 30/35/40/50 (T3 ONLY) ( ) Mid PTO Economy MId PTO for WORKMASTER 35/40 (T3 ONLY) ( ) Mid PTO Drive Kit-III AT Mid PTO for Boomer EasyDrive CVT Models ( ) Note: For Conventional Axle Only P84 $1, P84 $1, P96 $ SD_N5701 HITCH AND SUBFRAME S-Frame CLS3AT MY14 For Boomer EasyDrive CVT Models ( ) New Axle Only: Serial ZDMB11925 and above & Tier IV P64 $2, Page 45 of 110 -CP1C JAN-18

47 -CP1C 03 MODELS 72CO FRONT MOUNT ROTARY BROOM S-FRM CLS2 LS For COMPACT ( ) Current Models - Boomer 35/40 ROPS (T4B) - Boomer 40 CAB (T4B) - Boomer 45/50/55 ROPS (T4B) - Boomer 45/50/55 CAB (T4B) - WORKMASTER 35/40 (T4B) Prior models - Boomer 33/37 ROPS (T4B) - Boomer 37 Cab (T4B) - *Boomer 41/47 ROPS (T4B) - *Boomer 41/47 CAB (T4B) - WORKMASTER 33/37 (T4B) (Thetford Mines, Quebec, Canada) P04 $1, * Front mount completion hanger must also be ordered Front Quick Hitch 30/35/40/50 For Boomer 30/35/40/50 (T3 ONLY) ( ) Subframe Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) ( ) Front Quick Hitch - Class 3 For Boomer 3040/3045/3050 ( ) Conventional Axle Only: Serial ZDMB11924 and below P04 $1, P04 $1, P64 $2, OPTIONAL EQUIPMENT ROTARY BROOM OPTIONS SD_20087 HYDRAULIC FRAME ANGLING KIT Hydraulic Angling Kit For 72CO Broom ( ) 26 LB P94 $ SD_29035 SIDE CASTER WHEEL KIT Side Casterwheels Kit ( ) - 526GR ( ) - 72CO 47 LB P94 $ SD_N5702 FRONT BRACKETS FR MNT HANGER BRCKT (006) Front mount completion hanger is required for Boomer 41/47 (T4B) ROPS and CAB applications No Charge Page 46 of 110 -CP1C JAN-18

48 -CP1C 03 MODELS 72CO FRONT MOUNT ROTARY BROOM (Thetford Mines, Quebec, Canada) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Mid PTO Drive MID PTO 30/35/40/50 HP Mid-PTO for Boomer COMPACT 30/35/40/50 (T3 ONLY) MID PTO 35/40 HP WORKMASTER, FARMALL A Mid-PTO for WORKMASTER COMPACT 35/40 (T3 ONLY) MID PTO Drive Kit Cls 3 AT Mid-PTO for Boomer EasyDrive CVT Models Note: Conventional FWD Axle Only Mid PTO drive kit for 41/47 hp -T4 For Boomer - 41/47 ROPS/Cab (T4B) - 45/50/55 ROPS/Cab (T4B) MID PTO 32/36 HP T4 For Boomer - 33/37 ROPS, Boomer 37 CAB (T4B) For WORKMASTER - 33/37 ROPS (T4B) 25 KG P84 $1, LB P84 $1, KG P96 $ LB P84 $1, LB P84 $1, Hitch and Subframe SUBFRAME 30/35/40/50 HP For Boomer COMPACT 30/35/40/50 (T3 ONLY) Subframe 35/40 HP Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) SUBFRAME CLS 3 For Boomer EasyDrive CVT Models Conventional Axle Only: Serial ZDMB11924 and below Hitch and Sub Frame For Boomer EasyDrive CVT Models New Axle Only: Serial ZDMB11925 and above SUBFRAME CLS2 LS ENG T4 ECON PREM ROPS/C For COMPACT ( ) Current Models - Boomer 35/40 ROPS (T4B) - Boomer 40 CAB (T4B) - Boomer 45/50/55 ROPS (T4B) - Boomer 45/50/55 CAB (T4B) - WORKMASTER 35/40 (T4B) Prior models - Boomer 33/37 ROPS (T4B) - Boomer 37 Cab (T4B) - *Boomer 41/47 ROPS (T4B) - *Boomer 41/47 CAB (T4B) - WORKMASTER 33/37 (T4B) 325 KG P04 $1, LB P04 $1, LB P64 $2, KG P64 $2, LB P04 $1, * Front mount completion hanger must also be ordered Page 47 of 110 -CP1C JAN-18

49 -CP1C MID PTO CLS2 T4 LS ENG For Boomer ( ) - 35/40 ROPS, Boomer 40 CAB (T4B) For WORKMASTER - 35/40 ROPS (T4B) MODELS 72CO FRONT MOUNT ROTARY BROOM (Thetford Mines, Quebec, Canada) 25 LB P84 $1, Optional Equipment HYD ANGLING 60&72"(2.0,3.0) Fits 72CO Ballast Box X 6 side caster w/wheel kit 6" x 2" on 72COBA, 72COBB Ballast Box 500 Lb Max 0.5, LB Max (Class.5,.75, 1, & 2 compact tractors) Ballast box 1000 Lb Max (Category I) 1000 LB MAX (Class III compact tractors) 10 KG P94 $ LB P94 $ LB P62 $ LB P26 $ FR MNT COMPLETION HANGER (006) Front mount completion hanger is required for Boomer 41/47 (T4B) ROPS and CAB applications 20 LB P00 $ Page 48 of 110 -CP1C JAN-18

50 -CP1M GS FRONT MOUNT SNOW BLOWER (Thetford Mines, Quebec, Canada) Standard Equipment 836GSA FRONT MOUNT SNOW BLOWER (Reverse Drive Rotation) ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* TRACTOR APPLICATIONS: The following items are required to Current New Holland Compact Models make up a complete front mount snow - Boomer 24 blower: - Packaged Front Mount Snow Blower Prior New Holland Compact Models - Mid PTO Drive Kit - Boomer 20 / 25 - Hitch and Subframe - Hydraulic Valve Kit for Tractor SPECIFICATIONS: (See Tractor Service Part pages) Overall Width - 60 (in.) - Optional equipment can be added Cutting Width - 60 (in.) as desired Cutting Height - 20 (in.) Number of Fan Blades - 3 Note: 836GS previously ordered for Fan Diameter - 16 (in.) T1110 / Boomer 1030 will not work on Auger Diameter - 13 (in.) the Boomer 20/25 because the mid- Fan Drive - #40 HD Chain PTO turns in the opposite direction. Auger Drive: Mechanical Gearbox with shear pin protection New Holland recommends the use of a Two-Part Chute with: ballasting box when installing front - Manual Chute Rotation - Standard mounted implements. Shearbolt Protection - Standard Skid Shoe-Std. Adjustment - Standard WARRANTY New Holland Standard Warranty Applies SHIPPING POINT: Thetford Mines, Quebec, Canada Page 49 of 110 -CP1M JAN-18

51 -CP1M GS FRONT MOUNT SNOW BLOWER (Thetford Mines, Quebec, Canada) Models COMMERCIAL MODEL Weight Factory Data List Price 836GS 308 LB P22 $2, Page 50 of 110 -CP1M JAN-18

52 -CP1M GS FRONT MOUNT SNOW BLOWER (Thetford Mines, Quebec, Canada) Factory Supplied Options Order Code Description Weight Factory Data List Price FAST PICK CONFIGURATION SD_T9981 CONFIGURATION XT9981X Less Fast Pick Config Less Fast Pick Option X0283XX BMR 24 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 836GS Package for Boomer 24 ROPS Packages Contains: (836GA Front Mount Snow Blower) (Subframe for Boomer 24 ROPS) (Mid-PTO Kit) No Charge (900083P64) ($102.00) ATTACHMENT SECTION REQUIRED OPTIONS SD_03007 MID PTO DRIVE KIT Mid PTO CLS 1 20/25 For Boomer 24 & Boomer 20/25 ( ) P06 $ SD_N5701 HITCH AND SUBFRAME Subframe Cls 1 20/25 For Boomer 24 & Boomer 20/25 ( ) P46 $1, Page 51 of 110 -CP1M JAN-18

53 -CP1M GS FRONT MOUNT SNOW BLOWER (Thetford Mines, Quebec, Canada) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Mid PTO Kit MidPTO Drive Kit Boomer 20/25 For Boomer 24 & Boomer 20/25 Hitch and Subframe Hitch Subframe Boomer 20/25 For Boomer 24 & Boomer 20/25 Ballast Box Ballast Box 500 Lb Max 0.5, LB Max (Class.5,.75, 1, & 2 compact tractors) 18 LB P06 $ LB P46 $1, LB P62 $ Optional Equipment Hydraulic Chute Rotation Boomer 20/25 Hyd Chute Rotation for 836GS Snow Blower For Boomer 24 & Boomer 20/25 5 LB P94 $ Page 52 of 110 -CP1M JAN-18

54 -CP1M 02 50RSHB FRONT MOUNT SNOW BLOWER (Reverse Drive Rotation) ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* 50RSHB FRONT MOUNT SNOW BLOWER FOR WM25S (Thetford Mines, Quebec, Canada) Standard Equipment TRACTOR APPLICATIONS: The following items are required to Current New Holland Compact Models make up a complete front mount snow - WORKMASTER 25S blower: - Packaged Front Mount Snow Blower SPECIFICATIONS: - Mid PTO Drive Kit Overall Width - 50 (in.) - Hitch and Subframe Cutting Width - 50 (in.) - Hydraulic Kit for Tractor Cutting Height - 20 (in.) - Optional equipment can be added Number of Fan Blades - 4 as desired Fan Diameter (in.) Auger Diameter (in.) New Holland recommends the use of a Fan Drive - #40 HD Chain ballasting box when installing front Auger Drive: Mechanical Gearbox with mounted implements. shear pin protection Two-Part Chute with: WARRANTY - Manual Chute Rotation - Standard New Holland Standard Warranty Applies Shearbolt Protection - Standard Skid Shoe-Std. Adjustment - Standard SHIPPING POINT: Thetford Mines, Quebec, Canada Page 53 of 110 -CP1M JAN-18

55 -CP1M 02 50RSHB FRONT MOUNT SNOW BLOWER FOR WM25S (Thetford Mines, Quebec, Canada) Models COMMERCIAL MODEL Weight Factory Data List Price 50RSHB P00 $1, Page 54 of 110 -CP1M JAN-18

56 -CP1M 02 50RSHB FRONT MOUNT SNOW BLOWER FOR WM25S (Thetford Mines, Quebec, Canada) Factory Supplied Options Order Code Description Weight Factory Data List Price SD_03007 MID PTO DRIVE KIT MID PTO DRIVE KIT LS For WORKMASTER 25S ( ) P60 $ SD_N5701 HITCH AND SUBFRAME Hitch and Subframe SUBFRAME LS For WORKMASTER 25S ( ) P60 $ Page 55 of 110 -CP1M JAN-18

57 -CP1M 02 50RSHB FRONT MOUNT SNOW BLOWER FOR WM25S (Thetford Mines, Quebec, Canada) Factory Supplied Attachments Order Code Description Weight Factory Data List Price MOUNTING FRAME For WORKMASTER 25S ( ) PTO KIT For WORKMASTER 25S ( ) 80 LB P60 $ LB P60 $ Page 56 of 110 -CP1M JAN-18

58 -CP1M 04 63CSHB FRONT MOUNT SNOW BLOWER ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* 63CSHB FRONT MOUNT 2 STAGE SNOW BLOWER (Thetford Mines, Quebec, Canada) Standard Equipment TRACTOR APPLICATIONS: The following items are required to Current New Holland Compact Models make up a complete front mount snow - Boomer 35/40/45/50/55 ROPS (T4B) blower: - Boomer 40/45/50/55 Cab (T4B) - Packaged front mount snow blower - WORKMASTER 25/35/40 (T4B) - Quick Hitch and Subframe - Mid PTO Drive Kit Prior New Holland Compact Models - Mid-mount valve for Tractor - Boomer 33/37/41/47 ROPS (T4B) (See Tractor Service Parts pages) - Boomer 37/41/47 Cab (T4B) - Optional equipment can be added - WORKMASTER 33/37 (T4B) as desired - WORKMASTER 35/40 (T3) - Boomer 30/35/40/50 (T3) SPECIFICATIONS: NOTE: If tractor does not have couplers Overall Width - 63 (in.) (ordered without loader), Coupler Kit # Cutting Width - 63 (in.) must be ordered Cutting Height /2 (in.) Number of Fan Blades - 4 New Holland recommends the use of a Fan Diameter /4 (in.) ballasting box when installing front Auger Diameter /4 (in.) mounted implements. Fan Drive - Gear box reduction Two-Part Chute with WARRANTY - Hydraulic Chute Rotation - Standard New Holland Standard Warranty Applies Shearbolt Protection - Standard Skid Shoe-Std. Adj. - Standard SHIPPING POINT: Note: The 63CSHB input rotation Thetford Mines, Quebec, Canada (from the driver's seat) is clockwise. Page 57 of 110 -CP1M JAN-18

59 -CP1M 04 63CSHB FRONT MOUNT 2 STAGE SNOW BLOWER (Thetford Mines, Quebec, Canada) Models COMMERCIAL MODEL Weight Factory Data List Price 63CSHB 1,005 LB P96 $5, Page 58 of 110 -CP1M JAN-18

60 -CP1M 04 63CSHB FRONT MOUNT 2 STAGE SNOW BLOWER (Thetford Mines, Quebec, Canada) Factory Supplied Options Order Code Description Weight Factory Data List Price FAST PICK CONFIGURATION SD_T9981 CONFIGURATION XT9981X Less Fast Pick Config Less Fast Pick Option X0337XX WM 35 Gear R4 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 63CSHB Package for WORKMASTER 35 (G) ROPS (T4B) Packages Contains: (63CSHB Front Mount Snow Blower) (Subframe for WORKMASTER 35/40 ROPS T4B) (*Mid-PTO Kit) * Note: The WORKMASTER 35/40 T4B Gear must be equipped with a Mid-Mount PTO X0341XX WM 35 Gear R1 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 63CSHB Package for WORKMASTER 35 (G) ROPS (T4B) Packages Contains: (63CSHB Front Mount Snow Blower) (Subframe for WORKMASTER 35/40 ROPS T4B) (*Mid-PTO Kit) * Note: The WORKMASTER 35/40 T4B Gear must be equipped with a Mid-Mount PTO X0338XX WM 40 HST R4 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 63CSHB Package for WORKMASTER 40 (H) ROPS (T4B) Packages Contains: (63CSHB Front Mount Snow Blower) (Subframe for WORKMASTER 35/40 ROPS T4B) (Mid-PTO Kit) X0331XX BMR 40 Cab Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 63CSHB Package for Boomer 40 Cab (T4B) Packages Contains: (63CSHB Front Mount Snow Blower) (Subframe for Boomer 40 Cab T4B) (Mid-PTO Kit) No Charge (900133P66) ($163.00) (900133P66) ($163.00) (900133P66) ($163.00) (900133P66) ($163.00) Page 59 of 110 -CP1M JAN-18

61 -CP1M 04 63CSHB FRONT MOUNT 2 STAGE SNOW BLOWER (Thetford Mines, Quebec, Canada) ATTACHMENT SECTION REQUIRED OPTIONS SD_03007 MID PTO DRIVE KIT Mid PTO Kit Mid PTO 30/35/40/50 For Boomer COMPACT 30/35/40/50 (T3 ONLY) ( ) Mid PTO Tier 4 41/47 For Boomer - 41/47 ROPS/Cab (T4B) - 45/50/55 ROPS/Cab (T4B) For 63CSHB and 74CSHA ( ) Mid PTO 32/36 HP T3 For Boomer - 33/37 ROPS, Boomer 37 CAB (T4B) For WORKMASTER - 33/37 ROPS (T4B) For 63CSHB and 74CSHA ( ) MID PTO CLS For Boomer - 35/40 ROPS, Boomer 40 CAB (T4B) For WORKMASTER - 35/40 ROPS (T4B) For 63CSHB and 74CSHA ( ) Mid PTO Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) ( ) P84 $1, P84 $1, P84 $1, P84 $1, P84 $1, SD_29042 SNOW BLR CONFIG PKG Finishing Package (51CS/63CS) 120 LB No Charge SD_N5701 HITCH AND SUBFRAME Front Quick Hitch 30/35/40/50 For Boomer COMPACT 30/35/40/50 (T3 ONLY) ( ) Subframe Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) ( ) P04 $1, P04 $1, Page 60 of 110 -CP1M JAN-18

62 -CP1M 04 63CSHB FRONT MOUNT 2 STAGE SNOW BLOWER Hitch and Subframe S-FRM CLS2 LS For COMPACT ( ) Current Models - Boomer 35/40 ROPS (T4B) - Boomer 40 CAB (T4B) - Boomer 45/50/55 ROPS (T4B) - Boomer 45/50/55 CAB (T4B) - WORKMASTER 35/40 (T4B) Prior models - Boomer 33/37 ROPS (T4B) - Boomer 37 Cab (T4B) - *Boomer 41/47 ROPS (T4B) - *Boomer 41/47 CAB (T4B) - WORKMASTER 33/37 (T4B) (Thetford Mines, Quebec, Canada) P04 $1, * Front mount completion hanger must also be ordered OPTIONAL EQUIPMENT SD_20101 HYDRAULIC CHUTE DEF Hydraulic Chute Deflector Includes one cylinder, brackets and mounting hardware. For 63CSH, 72CSH, 74CSHA & 74CSHB ( ) 16 LB P10 $ SD_ PART CHUTE Part Chute Replaces 2-part chute for additional adjustment. For 63CSH, 72CSH, 74CSHA & 74CSHB ( ) 49 LB P16 $ SD_N5702 FRONT BRACKETS FR MNT HANGER BRCKT (006) Front mount completion hanger is required for Boomer 41/47 (T4B) ROPS and CAB applications No Charge Page 61 of 110 -CP1M JAN-18

63 -CP1M 04 63CSHB FRONT MOUNT 2 STAGE SNOW BLOWER (Thetford Mines, Quebec, Canada) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Hitch and Subframe SUBFRAME 30/35/40/50 HP For Boomer COMPACT 30/35/40/50 (T3 ONLY) Subframe 35/40 HP Economy For WORKMASTER COMPACT 35/40 (T3 ONLY) SUBFRAME CLS2 LS ENG T4 ECON PREM ROPS/C For COMPACT ( ) Current Models - Boomer 35/40 ROPS (T4B) - Boomer 40 CAB (T4B) - Boomer 45/50/55 ROPS (T4B) - Boomer 45/50/55 CAB (T4B) - WORKMASTER 35/40 (T4B) Prior models - Boomer 33/37 ROPS (T4B) - Boomer 37 Cab (T4B) - *Boomer 41/47 ROPS (T4B) - *Boomer 41/47 CAB (T4B) - WORKMASTER 33/37 (T4B) 325 KG P04 $1, LB P04 $1, LB P04 $1, * Front mount completion hanger must also be ordered Mid PTO Drive MID PTO 30/35/40/50 HP For Boomer COMPACT 30/35/40/50 (T3 ONLY) MID PTO 35/40 HP WORKMASTER, FARMALL A For WORKMASTER COMPACT 35/40 (T3 ONLY) Mid PTO drive kit for 41/47 hp -T4 For Boomer - 41/47 ROPS/Cab (T4B) - 45/50/55 ROPS/Cab (T4B ONLY) MID PTO 32/36 HP T4 For Boomer - 33/37 ROPS, Boomer 37 CAB (T4B) For WORKMASTER - 33/37 ROPS (T4B) 25 KG P84 $1, LB P84 $1, LB P84 $1, LB P84 $1, Optional Equipment Part Chute Replaces 2-part chute for additional adjustment. For 63CSH, 72CSH, 74CSHA & 74CSHB Hyd chute deflector Includes one cylinder, brackets and mounting hardware. For 63CSH, 72CSH, 74CSHA & 74CSHB Ballast Box Ballast Box 500 Lb Max 0.5, LB Max (Class.5,.75, 1, & 2 compact tractors) 45 LB P16 $ LB P10 $ LB P62 $ Page 62 of 110 -CP1M JAN-18

64 -CP1M 04 63CSHB FRONT MOUNT 2 STAGE SNOW BLOWER (Thetford Mines, Quebec, Canada) MID PTO CLS2 T4 LS ENG For Boomer - 35/40 ROPS, Boomer 40 CAB (T4B) For WORKMASTER - 35/40 ROPS (T4B) For 63CSHB and 74CSHA ( ) FR MNT COMPLETION HANGER (006) Front mount completion hanger is required for Boomer 41/47 (T4B) ROPS and CAB applications 25 LB P84 $1, LB P00 $ Page 63 of 110 -CP1M JAN-18

65 -CP1M 05 74CSHA/74CSHB FRNT MNT 2 STAGE SNOW BLR (Thetford Mines, Quebec, Canada) Standard Equipment 74CSHA FRONT MOUNT SNOW BLOWER Fan Drive - Gear box reduction 74CSHB FRONT MOUNT SNOW BLOWER Auger Drive - #60 HD chain Two-Part Chute with ******************************* - Hydraulic Chute Rotation - Standard SEE COMPATIBILITY GUIDE FOR Shearbolt Protection - Standard IMPLEMENT COMPATIBILITY Skid Shoe-Std. Adj. - Standard ******************************* Note: The 74CSHA/B input rotation (from the driver's seat) is clockwise. TRACTOR APPLICATIONS: 74CSHA Current New Holland Compact Models The following items are required - Boomer 35/40/45/50/55 ROPS (T4B) to make up a complete front mount - Boomer 40/45/50/55 Cab (T4B) snow blower: - WORKMASTER 35/40 (T4B) - Packaged front mount snow blower Prior New Holland Compact Models - Quick Hitch and Subframe - Boomer 30/35/40/50 (T3) - Mid PTO Drive Kit - Boomer 33/37/41/47 ROPS (T4B) - Hydraulic Valve Kit for Tractor - Boomer 37/41/47 Cab (T4B) (See Tractor Service Parts pages) - WORKMASTER 33/37 (T4B) - Optional equipment can be added as desired TRACTOR APPLICATIONS: 74CSHB Current New Holland Compact Models NOTE: If tractor does not have couplers - Boomer 46D/54D CVT (ordered without loader), Coupler Kit # - Boomer 45D/50D CVT (Canada Only) must be ordered Prior New Holland Compact Models - Boomer CVT 3040/3045/3050 New Holland recommends the use of a ballasting box when installing front SPECIFICATIONS: mounted implements. Overall Width - 74 (in.) Cutting Width - 74 (in.) WARRANTY Cutting Height - 26 (in.) New Holland Standard Warranty Applies Number of Fan Blades - 4 Fan Diameter - 24 (in.) SHIPPING POINT: Auger Diameter - 15 (in.) Thetford Mines, Quebec, Canada Page 64 of 110 -CP1M JAN-18

66 -CP1M 05 74CSHA/74CSHB FRNT MNT 2 STAGE SNOW BLR (Thetford Mines, Quebec, Canada) Models COMMERCIAL MODEL Weight Factory Data List Price 74CSHA 1,005 LB P04 $6, CSHB 450 LB P64 $6, Page 65 of 110 -CP1M JAN-18

67 -CP1M 05 74CSHA/74CSHB FRNT MNT 2 STAGE SNOW BLR (Thetford Mines, Quebec, Canada) Factory Supplied Options Order Code Description Weight Factory Data List Price FAST PICK CONFIGURATION SD_T9981 CONFIGURATION XT9981X Less Fast Pick Config Less Fast Pick Option X0332XX BMR 50 ROPS Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 74CSHA Package for Boomer 50 ROPS (T4B) Packages Contains: (74CSHA Front Mount Snow Blower) (Subframe for Boomer 50 ROPS) (Mid-PTO Kit) X0333XX BMR 50 Cab Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 74CSHA Package for Boomer 50 Cab (T4B) Packages Contains: (74CSHA Front Mount Snow Blower) (Subframe for Boomer 50 Cab T4B) (Mid-PTO Kit) X0281XX BMR 54D Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 74CSHB Package for Boomer 54C Cab Packages Contains: (74CSHB Front Mount Snow Blower) (Subframe for Boomer 54D Cab) (Mid-PTO Kit) No Charge (900160P72) ($196.00) (900160P72) ($196.00) (900160P72) ($196.00) ATTACHMENT SECTION REQUIRED OPTIONS SD_03007 MID PTO DRIVE KIT Mid PTO Kit Mid PTO 30/35/40/50 For Boomer COMPACT 30/35/40/50 (T3 ONLY) ( ) Mid PTO Drive Kit-III AT For Boomer EasyDrive CVT models ( ) Conventional FWD axle ONLY For 74CSHB ONLY P84 $1, P96 $ Page 66 of 110 -CP1M JAN-18

68 -CP1M 05 74CSHA/74CSHB FRNT MNT 2 STAGE SNOW BLR Mid PTO Tier 4 41/47 For Boomer - 41/47 ROPS/Cab (T4B) - 45/50/55 ROPS/Cab (T4B) For 63CSHB and 74CSHA ( ) Mid PTO 32/36 HP T3 For Boomer - 33/37 ROPS, Boomer 37 CAB (T4B) For WORKMASTER - 33/37 ROPS (T4B) For 63CSHB and 74CSHA ( ) MID PTO CLS For Boomer - 35/40 ROPS, Boomer 40 CAB (T4B) For WORKMASTER - 35/40 ROPS (T4B) For 63CSHB and 74CSHA ( ) (Thetford Mines, Quebec, Canada) P84 $1, P84 $1, P84 $1, SD_N5701 HITCH AND SUBFRAME Front Quick Hitch 30/35/40/50 For Boomer COMPACT 30/35/40/50 (T3 ONLY) ( ) Front Quick Hitch - Class 3 For Boomer EasyDrive CVT Models ( ) Conventional Axle Only: Serial #ZDMB11924 and below S-Frame CLS3AT MY14 For Boomer EasyDrive CVT Models ( ) Conventional Axle Only: Serial #ZDMB11925 and above Hitch and Subframe S-FRM CLS2 LS For COMPACT ( ) Current Models - Boomer 35/40 ROPS (T4B) - Boomer 40 CAB (T4B) - Boomer 45/50/55 ROPS (T4B) - Boomer 45/50/55 CAB (T4B) - WORKMASTER 35/40 (T4B) Prior models - Boomer 33/37 ROPS (T4B) - Boomer 37 Cab (T4B) - *Boomer 41/47 ROPS (T4B) - *Boomer 41/47 CAB (T4B) - WORKMASTER 33/37 (T4B) P04 $1, P64 $2, P64 $2, P04 $1, * Front mount completion hanger must also be ordered Page 67 of 110 -CP1M JAN-18

69 -CP1M 05 74CSHA/74CSHB FRNT MNT 2 STAGE SNOW BLR (Thetford Mines, Quebec, Canada) OPTIONAL EQUIPMENT SD_20101 HYDRAULIC CHUTE DEF Hydraulic Chute Deflector Includes one cylinder, brackets and mounting hardware. For 63CSH, 72CSH, 74CSHA & 74CSHB ( ) 16 LB P10 $ SD_ PART CHUTE Part Chute Replaces 2-part chute for additional adjustment. For 63CSH, 72CSH, 74CSHA & 74CSHB ( ) 49 LB P16 $ SD_N5702 FRONT BRACKETS FR MNT HANGER BRCKT (006) Front mount completion hanger is required for Boomer 41/47 (T4B) ROPS and CAB applications No Charge Page 68 of 110 -CP1M JAN-18

70 -CP1M 05 74CSHA/74CSHB FRNT MNT 2 STAGE SNOW BLR (Thetford Mines, Quebec, Canada) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Hitch and Subframe SUBFRAME 30/35/40/50 HP For Boomer COMPACT 30/35/40/50 (T3 ONLY) SUBFRAME CLS2 LS ENG T4 ECON PREM ROPS/C For COMPACT ( ) Current Models - Boomer 35/40 ROPS (T4B) - Boomer 40 CAB (T4B) - Boomer 45/50/55 ROPS (T4B) - Boomer 45/50/55 CAB (T4B) - WORKMASTER 35/40 (T4B) Prior models - Boomer 33/37 ROPS (T4B) - Boomer 37 Cab (T4B) - *Boomer 41/47 ROPS (T4B) - *Boomer 41/47 CAB (T4B) - WORKMASTER 33/37 (T4B) * Front mount completion hanger must also be ordered SUBFRAME CLS 3 For Boomer EasyDrive CVT Models Conventional Axle Only: Serial ZDMB11924 and below Hitch and Sub Frame For Boomer EasyDrive CVT Models Conventional Axle Only: Serial #ZDMB11925 and above Mid PTO Drive MID PTO 30/35/40/50 HP For Boomer COMPACT 30/35/40/50 (T3 ONLY) MID PTO Drive Kit Cls 3 AT For Boomer EasyDrive CVT Models - Conventional Axle Only Mid PTO drive kit for 41/47 hp -T4 For Boomer - 41/47 ROPS/Cab (T4B) - 45/50/55 ROPS/Cab (T4B ONLY) MID PTO 32/36 HP T4 For Boomer - 33/37 ROPS, Boomer 37 CAB (T4B) For WORKMASTER - 33/37 ROPS (T4B) 325 KG P04 $1, LB P04 $1, LB P64 $2, KG P64 $2, KG P84 $1, KG P96 $ LB P84 $1, LB P84 $1, Optional Equipment Part Chute Replaces 2-part chute for additional adjustment. For 63CSH, 72CSH, 74CSHA & 74CSHB Hyd chute deflector Includes one cylinder, brackets and mounting hardware. For 63CSH, 72CSH, 74CSHA & 74CSHB 45 LB P16 $ LB P10 $ Page 69 of 110 -CP1M JAN-18

71 -CP1M 05 74CSHA/74CSHB FRNT MNT 2 STAGE SNOW BLR (Thetford Mines, Quebec, Canada) Ballast Box Ballast box 1000 Lb Max (Category I) 1000 LB MAX (Class III compact tractors) 169 LB P26 $ MID PTO CLS2 T4 LS ENG For Boomer - 35/40 ROPS, Boomer 40 CAB (T4B) For WORKMASTER - 35/40 ROPS (T4B) For 63CSHB and 74CSHA ( ) FR MNT COMPLETION HANGER (006) Front mount completion hanger is required for Boomer 41/47 (T4B) ROPS and CAB applications 25 LB P84 $1, LB P00 $ Page 70 of 110 -CP1M JAN-18

72 -CP1M 06 64CSRA REAR MOUNT SNOW BLOWER (Thetford Mines, Quebec, Canada) Standard Equipment CURRENT INVENTORY ONLY 64CSRA REAR MOUNT 2- STAGE SNOW BLOWER SPECIFICATIONS: TRACTOR APPLICATIONS: Overall Width - 64 (in.) Current New Holland Compact Models Cutting Width - 64 (in.) - Boomer 33/37/41/47 ROPS Cutting Height - 26 (in.) - Boomer 37/41/47 Cab Number of Fan Blades Boomer 46D/54D Fan Diameter - 24 (in.) - Boomer 45D/50D (Canada Only) Auger Diameter - 15 (in.) Auger Drive - #60 Chain Prior New Holland Compact Models Two-Part Chute: - Boomer 30/35/40/50 - Manual Rotation* - Optional - Boomer CVT 3040/3045/ Hydraulic Rotation** - Optional Shearbolt Protection - Standard Adjustable Skid Shoes - Standard Hitch, Driveline, Chute (less rotation) - Yes WARRANTY New Holland Standard Warranty Applies SHIPPING POINT: Thetford Mines, Quebec, Canada Page 71 of 110 -CP1M JAN-18

73 -CP1M 06 64CSRA REAR MOUNT SNOW BLOWER (Thetford Mines, Quebec, Canada) Models COMMERCIAL MODEL Weight Factory Data List Price 64CS 455 LB P02 $3, Page 72 of 110 -CP1M JAN-18

74 -CP1M 06 64CSRA REAR MOUNT SNOW BLOWER (Thetford Mines, Quebec, Canada) Factory Supplied Options Order Code Description Weight Factory Data List Price ATTACHMENT SECTION REQUIRED OPTIONS SD_29042 SNOW BLR CONFIG PKG Hydraulic Chute Rotation Kit Required if manual chute rotation is not selected. Includes hydraulic cylinder. Hoses not inclued. *one tractor rear remote valve is required for operation. for 64CSR ( ) 80 LB P94 $ Page 73 of 110 -CP1M JAN-18

75 -CP1M 06 64CSRA REAR MOUNT SNOW BLOWER (Thetford Mines, Quebec, Canada) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Required Options Manual Roation IN Required if hydraulic chute is not selected Hydraulic Rotation 64IN Required if manual chute rotation is not selected. Includes hydraulic cylinder. Hoses not inclued. *one tractor rear remote valve is required for operation. 9 LB P48 $ LB P94 $ Page 74 of 110 -CP1M JAN-18

76 -CP2F GMS MID-MOUNT MOWER FOR WM25S 160GMS Side Discharge ( ) ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* Standard Equipment TRACTOR APPLICATIONS: Specifications Current New Holland Compact Models Cutting Width (in.): 60 - WORKMASTER 25S Overall Width (in.): 75.6 Cutting Height Range (in.): 1 to 4 160GMS is only compatible with the Deck Shell Thickness (in.): WORKMASTER 25S Spindle Speed at 3000 RPM: 2,640 Blade Tip Speed (ft./min.): 14,144 Number of Blades: 3 Blade Length (in.): 20.5 Blade Width (in.): 2.48 Blade Thickness (in.): Weight of Base 60" Deck (lbs.): 285 WARRANTY: New Holland Standard Warranty Applies Page 75 of 110 -CP2F JAN-18

77 -CP2F GMS MID-MOUNT MOWER FOR WM25S Models COMMERCIAL MODEL Weight Factory Data List Price 160GMS 285 LB P76 $1, Page 76 of 110 -CP2F JAN-18

78 -CP1Z GMS MID-MOUNT ROTARY MOWERS Standard Equipment 260GMS Side Discharge ( ) 266GMS Side Discharge ( ) ******************************* ******************************* SEE COMPATIBILITY GUIDE FOR CURRENT INVENTORY ONLY IMPLEMENT COMPATIBILITY ******************************* ******************************* TRACTOR APPLICATIONS: TRACTOR APPLICATIONS: Current New Holland Compact Models Prior New Holland Compact Models - Boomer 24 - Boomer 30 & 35 (T3) - WORKMASTER 35 & 40 (T3) Prior New Holland Compact Models - Boomer 20 / 25 SPECIFICATIONS: "Drive-over" design for installation SPECIFICATIONS: Cutting Width (in.) - 66 "Drive-over" design for installation Cutting Height (in.) Cutting Width (in.) - 60 Overall width (in.) - discharge chute Cutting Height (in.) down inch increments Number of Blades - 3 Overall width (in.) - discharge chute Blade Type - Standard - down 74 Blade Length/Width (in.)- 23 L x 2.5 W Number of Blades - 3 Blade Tip Speed (in feet per minute) - Blade Type - Standard Less than (ANSI) Blade Length/Width (in.)- 21 L x 2.5 W Drive - Mid PTO Blade Tip Speed (in feet per minute) Gauge Wheels (in.) - 2 x 6 (4) - Less than (ANSI) Deck Spring suspension - Yes Drive - Mid PTO Deck Shell Weldment - 10 gauge sides Gauge Wheels (in.) - 2 x 5 (4) & top, 1/4" spindle reinforcement pads Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides 266GMS Tire Compatibility: BMR 30/35 & top,1/4" spindle reinforcement pads (T3) & WM 35/40 (T3) Agricultural (R1) -Yes, limited turn angle 260GMS Tire Compatibility: BMR 20/25 Right Hand - 24 degrees - Industrial (R4) - Yes Left Hand - 27 degrees - Turf (R3) - Yes Industrial (R4) - Yes, limited turn angle Right Hand - 33 degrees Serial # YDWWH0259 and higher will fit Left Hand - 37 degrees the Boomer 24 and the Boomer 20/25 Turf (R3) - Yes, limited turn angle Right Hand - 33 degrees Serial # YDWWH0258 and below must Left Hand - 37 degrees order "right-hand lift link" AME451673B to fit the Boomer 24 Page 77 of 110 -CP1Z JAN-18

79 -CP1Z GMS MID-MOUNT ROTARY MOWERS Standard Equipment 272GMS Side Discharge ( ) 366GMS Side Discharge ( for BMR 33/37 ROPS T4B) ******************************* ( for BMR 35/40 ROPS T4B) SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY ******************************* ******************************* SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY TRACTOR APPLICATIONS: ******************************* Current New Holland Compact Models - Boomer 46D/54D CVT TRACTOR APPLICATIONS: - Boomer 45D/50D CVT (Canada Only) Current New Holland Compact Models - Boomer 33/37 ROPS (T4B) Prior New Holland Compact Models - Boomer 35/40 ROPS (T4B) - Boomer CVT 3040, 3045, & 3050 SPECIFICATIONS: SPECIFICATIONS: "Drive-over" design for installation "Drive-over" design for installation Cutting Width (in.) - 66 Cutting Width (in.) - 72 Cutting Height (in.) Cutting Height (in.) Overall width (in.) - discharge chute Overall width (in.) - discharge chute down 79 down 85 Number of Blades - 3 Number of Blades - 3 Blade Type - Standard Blade Type - Standard Blade Length/Width (in.)- 23 L x 2.5 W Blade Length/Width (in.) -25 L x 2.5 W Blade Tip Speed (in feet per minute) - Blade Tip Speed (in feet per minute) - Less than (ANSI) Less than 18,000 (ANSI) Drive - Mid PTO Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides Deck Shell Weldment - 10 gauge sides & top, 1/4" spindle reinforcement pads & top, 1/4" spindle reinforcement pads 366GMS Tire Compatibility: BMR 33/37 272GMS Tire Compatibility: BMR 3000 (T4B) & BMR 35/40 (T4B) Cab & Boomer 45D/50D/54D Agricultural (R1) - No Agricultural (R1) - NO (24" Rear Rim) Industrial (R4) - Yes, limited turn angle: Industrial (R4) - YES limited turn angle: Right Hand - 33 degrees Right Hand - 34 degrees Left Hand - 37 degrees Left Hand - 35 degrees Turf (R3) - Yes, limited turn angle: Turf (R3) - Yes, limited turn angle: Right Hand - 33 degrees Right Hand - 34 degrees Left Hand - 37 degrees Left Hand - 35 degrees Galaxy Turf - NO NOTE: Steering Adjustments required when using 272GMS with Ind (R4) tires or Turf (R3) tires. Refer to ASIST. Page 78 of 110 -CP1Z JAN-18

80 -CP1Z GMS MID-MOUNT ROTARY MOWERS Standard Equipment 366GMS Side Discharge 372GMS Side Discharge ( for WM 33/37 T4B) ( for BMR 41/47 ROPS T4B) ( for WM 35/40 T4B) ( for BMR ROPS T4B) ******************************* ******************************* SEE COMPATIBILITY GUIDE FOR SEE COMPATIBILITY GUIDE FOR IMPLEMENT COMPATIBILITY IMPLEMENT COMPATIBILITY ******************************* ******************************* TRACTOR APPLICATIONS: TRACTOR APPLICATIONS: Current New Holland Compact Models Current New Holland Compact Models - Boomer 41/47 ROPS (T4B) - WORKMASTER 35 & 40 (T4B) - Boomer 45/50/55 Rops (T4B) - WORKMASTER 33 & 37 (T4B) SPECIFICATIONS: SPECIFICATIONS: "Drive-over" design for installation "Drive-over" design for installation Cutting Width (in.) - 72 Cutting Width (in.) - 66 Cutting Height (in.) Cutting Height (in.) Overall width (in.) - discharge chute Overall width (in.) - chute down 79 down 85 Number of Blades - 3 Number of Blades - 3 Blade Type - Standard Blade Type - Standard Blade Length/Width (in.)- 23 L x 2.5 W Blade Length/Width (in.)- 25 L x 2.5 W Blade Tip Speed (in feet per minute) - Blade Tip Speed (in feet per minute) - Less than (ANSI) Less than 18,000 (ANSI) Drive - Mid PTO Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides Deck Shell Weldment - 10 gauge sides & top, 1/4" spindle reinforcement pads & top, 1/4" spindle reinforcement pads 366GMS Tire Compatibility: WM 33/37 372GMS Tire Compatibility: BMR 41/47 (T4B), WM 35/40 (T4B) & WM25 (T4B) & BMR 45/50/55 (T4B) Agricultural (R1) - No Agricultural (R1) - NO Industrial (R4) - Yes, limited turn angle: Industrial (R4) - NO Right Hand - 33 degrees Turf (R3) - Yes, limited turn angle: Left Hand - 37 degrees Right Hand - 34 degrees Turf (R3) - Yes, limited turn angle: Left Hand - 35 degrees Right Hand - 33 degrees Galaxy Turf - NO Left Hand - 37 degrees NOTE: Steering Adjustments need to be made when using 372GMS with Turf (R3) tires. Refer to ASIST. Page 79 of 110 -CP1Z JAN-18

81 -CP1Z GMS MID-MOUNT ROTARY MOWERS Standard Equipment WARRANTY: 260/262/272/366/372GMS New Holland Standard Warranty Applies Service Parts: 260GMS - Mulch Kit - AMENHM /366GMS - Mulch Kit - AMENHM628 Serial # YEWWB0001 & higher 266/366GMS - Mulch Kit - AMENHM673 Serial # YEWWA9999 & lower 272/372GMS - Mulch Kit - AMENHM /366GMS - Ramp Kit - AMENHM /372GMS - Ramp Kit - AMENHM747 Page 80 of 110 -CP1Z JAN-18

82 -CP1Z GMS MID-MOUNT ROTARY MOWERS Models COMMERCIAL MODEL Weight Factory Data List Price 366GMS BMR/WM ROPS 35/ LB P98 $3, GMS BMR45/50/55 ROPS 443 LB P36 $3, GMS P60 $3, GMS BMR/WM 443 LB P98 $3, Includes the following Equipment Linkage CLS 2 Econ (439054) $ GMS 592 LB P36 $3, GMS FOR CVT 623 LB P36 $3, GMS 443 LB P98 $3, GMS FOR WM33/ LB P98 $3, GMS 567 LB P36 $3, Page 81 of 110 -CP1Z JAN-18

83 -CP1Z GMS MID-MOUNT ROTARY MOWERS Factory Supplied Options Order Code Description Weight Factory Data List Price FAST PICK CONFIGURATION SD_T9981 CONFIGURATION XT9981X Less Fast Pick Config X0341XX WM 35 Gear R1 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 366GMS for WORKMASTER 35 (G) ROPS (T4B) Package Contains: - * (366GMS 66" Side Dischage Deck) *Note: The WORKMASTER 35 ROPS (T4B) Gear must be equipped with a Mid-Mount PTO X0337XX WM 35 Gear R4 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 366GMS for WORKMASTER 35 (G) ROPS (T4B) Package Contains: - * (366GMS 66" Side Dischage Deck) *Note: The WORKMASTER 35 ROPS (T4B) Gear must be equipped with a Mid-Mount PTO X0338XX WM 40 HST R4 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 366GMS for WORKMASTER 40 (H) ROPS (T4B) Package Contains: (366GMS 66" Side Dischage Deck) X0283XX BMR 24 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 260GMS for Boomer 24 ROPS Package Contains: (260GMS 60" Side Dischage Deck) X0332XX BMR 50 ROPS Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 372GMS for Boomer 50 ROPS Package Contains: (372GMS 72" Side Dischage Deck) X0279XX WRKMSTR 33 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 366GMS for WORKMASTER 33 ROPS Package Contains: - * (366GMS 66" Side Dischage Deck) *Note: The WORKMASTER 33 ROPS must be equipped with a Mid- Mount PTO MT (order through parts) No Charge (900059P86) ($73.00) (900059P86) ($73.00) (900059P86) ($73.00) (900058P22) ($71.00) (900061P50) ($75.00) (900059P86) ($73.00) Page 82 of 110 -CP1Z JAN-18

84 -CP1Z GMS MID-MOUNT ROTARY MOWERS X0280XX WRKMSTR 37 Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 366GMS for WORKMASTER 37 ROPS Package Contains: - * (366GMS 66" Side Dischage Deck) *Note: The WORKMASTER 37 ROPS must be equipped with a Mid- Mount PTO MT (order through parts) X0282XX BMR 47 Rops Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 372GMS for Boomer 47 ROPS Package Contains: - * (372GMS 72" Side Dischage Deck) *Note: The Boomer 47 ROPS must be equipped with a Mid-Mount PTO MT (order through parts) (900059P86) ($73.00) (900061P50) ($75.00) X0281XX BMR 54D Fast Pick FAST PICK PKG PRICE = 2% SAVINGS OVER ALA-CART ORDER Fast Pick 272GMS for Boomer 54D Cab Package Contains: (272GMS 72" Side Dischage Deck) (900061P50) ($75.00) COMPLETING PACKAGES COMPLETING PACKAGES SD_H5801 COMPLETING PACKAGES Completing Kit for 266GMS ONLY Linkage CLS 2 Prem Linkage for 266GMS to fit Boomer 30/ P00 $ Linkage CLS 2 Econ Linkage for 266GMS to fit WORKMASTER 35/ P00 $ Page 83 of 110 -CP1Z JAN-18

85 -CP1A SERIES REAR-MOUNTED FINISH MOWERS (Shipment from Depots) Standard Equipment The 300 series are 3-pt. mounted Number of Blades finishing mowers for use on tractors 310GM - 3 equipped with 540 rpm PTO. Prices 320GM - 3 include solid rubber gauge wheels. 330GM - 5 MODEL: Blade Speed (RPM) 310GM / 320GM / 330GM 310GM - 2, GM - 2,230 SIZE: 330GM - 2, GM - 60" ( ) 320GM - 72" ( ) Weight (lbs) 330GM - 90" ( ) 310GM GM SPECIFICATIONS: 330GM Cutting Height Range 1 to 4" 3 Pt Mounted (floating hitch) Cat. 1 ACCESSORIES Rear Discharge (Order through Service Parts) Discharge Safety Chain Standard V Belt Drive Standard Mulching Kits: Solid Rubber Guage Wheels (fully SIT " Rear Discharge rotating) 4 SIT " Rear Discharge Standard PTO (RPM) 540 SIT " Rear Discharge PTO HP Rating up to: Anti-Scalp Kit (front adjustable roler): 310GM - 30 SIT " & 72" 320GM - 40 SIT " 330GM - 60 Pneumatic Tire Kit: SIT " Set of 4 SIT " Set of 4 SIT " Set of 4 Note: All Pneumatic Tire Kits Include Wheels and Forks Page 84 of 110 -CP1A JAN-18

86 -CP1A SERIES REAR-MOUNTED FINISH MOWERS (Shipment from Depots) Models COMMERCIAL MODEL Weight Factory Data List Price 310GM 435 LB P24 $2, GM 500 LB P72 $2, GM 683 LB P30 $4, Page 85 of 110 -CP1A JAN-18

87 -CP1T "VALUE" SERIES ROTARY CUTTERS (Distribution Center) Standard Equipment "Value" Series Designed to compliment Compact and Hitch - 3-point Utility tractors equipped with 3-point Driveline Category - Cat. I hitch and 540 rpm PTO. Gearbox Rating (horsepower) - 48 Gearbox Warranty (years) - 5 Models: Galvanized Warranty (years) / 716 / 717 Slip Protection - Shear Bolt Deck Gauge (gauge): Size (inches): & Side Panel Depth - 8 in. x 7 gauge Blade Carrier - Pan Blade Size - 3/8 in. x 3 in. Updraft SPECIFICATIONS Blade Tip Speed (540): Tractor Horsepower (max.) ,215 fpm Cutting Width (inches): ,519 fpm ,995 fpm Minimum Cutting Height (inch) Tire & Wheel - Laminated Overall Width (inches): Safety Deflectors - Rear Rubber Belting Weight (pounds): Overall Length (inches): VALUE SERIES ACCESSORIES (Order through Service Parts) MAG010D ft. Front Chain Guards MAG010D ft. Rear Chain Guards MAG010D ft. Front Chain Guards MAG010D ft. Rear Chain Guards MAG010D ft. Front Chain Guards MAG010D ft. Rear Chain Guards MAG125D801D01 Slip Clutch Page 86 of 110 -CP1T JAN-18

88 -CP1T "VALUE" SERIES ROTARY CUTTERS (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price 714GCA 519 LB P04 $1, GCA 781 LB P40 $1, GCA 885 LB P86 $2, Factory Supplied Options Order Code Description Weight Factory Data List Price SD_N6428 FRONT SAFETY CHAINS Front Safety Chains P08 $ GCA - 48" ( ) 716GCA - 60" ( ) 717GCA - 72" ( ) SD_N6429 REAR SAFETY CHAINS Rear Safety Chains P08 $ GCA - 48" ( ) 716GCA - 60" ( ) 717GCA - 72" ( ) SD_N6430 SLIP CLUTCH Slip Clutch P06 $ SD_N6433 COATING Galvanized P02 $ Page 87 of 110 -CP1T JAN-18

89 -CP1T "VALUE" SERIES ROTARY CUTTERS (Distribution Center) SD_N6436 QUICK ATTACH HITCH Quick Attach Hitch Value - 714GCA, 716GCA, 717GCA Medium-Duty - 736GCA, 737GCA ( ) P06 $83.00 Medium-Duty - 738GCA Heavy-Duty - 757GCA, 758GCA ( ) Page 88 of 110 -CP1T JAN-18

90 -CP1T "VALUE" SERIES ROTARY CUTTERS (Distribution Center) Factory Supplied Attachments Order Code Description Weight Factory Data List Price 714GCA ONLY " Front Safety Chains 27 LB P08 $ " Rear Safety Chains 42 LB P08 $ GCA ONLY " Front Safety Chains 29 LB P08 $ " Rear Safety Chains 44 LB P08 $ GCA ONLY " Front Safety Chains 33 LB P08 $ " Rear Safety Chains 48 LB P08 $ Page 89 of 110 -CP1T JAN-18

91 -CP1T "MEDIUM-DUTY" SERIES ROTARY CUTTERS (Distribution Center) Standard Equipment Standard "Medium-Duty" Series Designed to compliment Compact and Hitch - 3-point Utility tractors equipped with 3-point Driveline Category - Cat. I hitch, 540 rpm PTO, and provide rugged Gearbox Rating (horsepower) - 65 performance to maintain larger acreages Gearbox Warranty (years) - 5 and estates. Galvanized Warranty (years) - 12 Slip Protection - Slip Clutch Models: Deck Gauge (gauge) / 737 / 738 Side Panel Depth: 736 & in. x 7 gauge Size (inches): in. x 1/4 in Blade Carrier - Pan Output Shaft Diameter (inches) Blade Size: 736-3/8 in. x 3 in. Updraft SPECIFICATIONS 737 & 738-1/2 in. x 4 in. Updraft Tractor Horsepower (max.): Blade Tip Speed (540): ,519 fpm ,995 fpm ,300 fpm Cutting Width (inches): Minimum Cutting Height (inch) Tire & Wheel - Laminated Safety Deflectors - Rear Rubber Belting Weight (pounds): Overall Width (inches): , Overall Length (inches): STANDARD "MEDIUM" DUTY ACCESSORIES (Order through Service Parts) MAG010D ft. Front Chain Guards MAG010D ft. Rear Chain Guards MAG010D ft. Front Chain Guards MAG010D ft. Rear Chain Guards MAG010D ft. Front Chain Guards MAG010D ft. Rear Chain Guards MAG401DSKID8HWY Skid Shoes Page 90 of 110 -CP1T JAN-18

92 -CP1T "MEDIUM-DUTY" SERIES ROTARY CUTTERS (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price 736GCA 985 LB P58 $2, GCA 1,005 LB P64 $2, GCA 1,305 LB P10 $3, Factory Supplied Options Order Code Description Weight Factory Data List Price SD_N6431 DUAL TAIL WHEEL Dual Tail Wheel P56 $ SD_N6433 COATING Galvanized P14 $ SD_N6436 QUICK ATTACH HITCH Quick Attach Hitch Value - 714GCA, 716GCA, 717GCA Medium-Duty - 736GCA, 737GCA ( ) P78 $ Medium-Duty - 738GCA Heavy-Duty - 757GCA, 758GCA ( ) Page 91 of 110 -CP1T JAN-18

93 -CP1T "HEAVY-DUTY" SERIES ROTARY CUTTERS (Distribution Center) Standard Equipment "Heavy-Duty" Series Designed for Utility and Mid-Range Hitch - 3-point tractors equipped with 3-point hitch, Driveline Category: 540 rpm PTO, and provide rugged 757 & Cat. I performance for maintenance of large Gearbox Rating (horsepower): farms or ranch operations. 757 & Gearbox Warranty (years) - 5 Models: Galvanized Warranty (years) / 758 Slip Protection - Slip Clutch Deck Gauge (gauge) - 7 Size (inches): Side Panel Depth - 8 in. x 1/4 in Blade Carrier - Pan Output Shaft Diameter (inches) - 2 Blade Size - 1/2 in. x 4 in. Updraft SPECIFICATIONS Blade Tip Speed (540): Tractor Horsepower (max.): ,995 fpm 757 & ,495 fpm Cutting Width (inches): Minimum Cutting Height (inch) Tail Wheel: , 758, & - Single Spindle Overall Width (inches): Tire & Wheel - Laminated Safety Deflectors - Front/Rear Chains Weight (pounds): Overall Length (inches): 757-1, , HEAVY DUTY ACCESSORIES (Order through Service Parts) MAG010d3992B 7 ft. (758GC) Dual Spindle Tail Wheel Page 92 of 110 -CP1T JAN-18

94 -CP1T "HEAVY-DUTY" SERIES ROTARY CUTTERS (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price 757GCA 1,153 LB P74 $3, GCA 1,604 LB P32 $5, Factory Supplied Options Order Code Description Weight Factory Data List Price SD_N6431 DUAL TAIL WHEEL Dual Tail Wheel P56 $ SD_N6433 COATING Galvanized P14 $ SD_N6436 QUICK ATTACH HITCH Quick Attach Hitch Value - 714GCA, 716GCA, 717GCA Medium-Duty - 736GCA, 737GCA ( ) P06 $83.00 Medium-Duty - 738GCA Heavy-Duty - 757GCA, 758GCA ( ) if MODEL is 757GCA 72in RR3 Rot P78 $ if MODEL is 758GCA 84in HD Rotary C P78 $ Page 93 of 110 -CP1T JAN-18

95 -CP1T "Heavy-Duty" Pull-Type Series 700 "HEAVY-DUTY" PULL-TYPE ROTARY CUTTER (Distribution Center) Standard Equipment 780GCC in. x 1/4 in. Blade Carrier - Pan Output Shaft Diameter (inches): Designed for Mid-Range and High- 780GCA - 2 or 2-3/8 Horsepower tractors providing rugged 780GCB - 2 or 2-3/8 performance for maintenance of large 780GCC - 2 or 2 3/8 farms or ranch operations. Blade Size: 780GCA - 1/2 in. x 4 in. Updraft Size: 780GCB - 1/2 in. x 4 in. Updraft 780GCA - 15 ft. Triple Flex 780GCC - 1/2 in. x 4 in. Updraft 780GCB - 15 ft. Triple Flex Blade Tip Speed (center/out): 780GCC - 15 ft. Triple Flex 780GCA - 15,238/14, GCB - 15,238/14,821 SPECIFICATIONS 780GCC - 15,238/14,821 Tractor Horsepower (max.): Minimum Cutting Height (inch) GCA Tail Wheel: 780GCB GCA - 3 Spindle 780GCC GCB - 3 Spindle Cutting Width (inches): 780GCC - 3 Spindle 780GCA Tire & Wheel: 780GCB GCA - Laminated 780GCC GCB - 6 tires x 6.75 x 14 Overall Width (inches): (used Aircraft tires) 780GCA GCC - 6 tires x 6.75 x14 780GCB (used Aircraft tires) 780GCC Hydraulic Level Lift: Overall Length (inches): 780GCA - Optional 780GCA GCB - Standard 780GCB GCC - Standard 780GCC Safety Deflectors - Front/Rear Chains Hitch - Pull-Type Weight (pounds): Driveline Category - PT/CV Joint 780GCA - 5,397 Gearbox Rating (horsepower): 780GCB - 5, GCA - 255/ GCC - 5, GCB - 255/210 PTO Shaft: 780GCC - 255/210 Gearbox Warranty (years) GCA GCB /8 in. shaft Galvanized Warranty (years) GCC /4 in. shaft Slip Protection - Slip Clutch Deck Gauge (gauge) - 7 PULL TYPE ACCESSORIES Side Panel Depth: (Order through Service Parts) 780GCA in. x 1/4 in. MAG415D ft. Hydraulic Level 780GCB in. x 1/4 in. Lift Page 94 of 110 -CP1T JAN-18

96 -CP1T "HEAVY-DUTY" PULL-TYPE ROTARY CUTTER (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price 780GCA 5,894 LB P92 $19, GCB 1,749 LB P98 $22, GCC 5,594 LB P98 $22, Factory Supplied Options Order Code Description Weight Factory Data List Price SD_16049 EXTRA WHEELS, TIRES AND RIMS 780GCA ONLY Aircraft Tires (6) Set of 6 Used Aircraft Tires Aircraft Tires (8) 780GCB & 780GCC ONLY Set of 8 Used Aircraft Tires Aircraft Tires (2) Additional set of 2 Used Aircraft tires for a total of 8 Used Aircraft Tires 780GCA, 780GCB, & 780GCC ONLY Foam Filled P Tire 6 Set of 6 Foam Filled Tires Foam Filled P Tire 8 Set of 8 Foam Filled Tires P96 $1, P08 $1, P20 $ P08 $1, P96 $2, SD_N6431 DUAL TAIL WHEEL Dual Tail Wheel P56 $ SD_N6432 HYD LIFT 780GCA ONLY Hyd Lift Hydraulic Level Lift P00 $1, SD_N6433 COATING Galvanized P02 $ if MODEL is 780GCA 180in Pt Flex Rot C P70 $ if MODEL is 780GCB 780GCB P70 $ if MODEL is 780GCC P70 $ Page 95 of 110 -CP1T JAN-18

97 -CP1K 01 MODEL 105A ROTARY TILLER (Shipment from Depots) Standard Equipment 3- point hitch mounted, 540 rpm PTO No. of Blades driven tiller, available in operating widths 60 inch - 28 of 60 in. and 72 in. 72 inch - 36 Blade Tip Speed 540 rpm SPECIFICATIONS: 60 inch & 72 inch Approximate Working Width (inches) - 60 inch - 60 (in.) 72 inch - 72 (in.) A complete rotary tiller includes the Tilling Depth Adjustment with following: Guide Shoe (in.) - Basic Tiller Maximum Tilling Depth without - Category 1 Hitch Guide Shoes (in.) - PTO with Slip Clutch Hitch - Cat. I Offset Adjustment to Right - 11 (in.) WARRANTY PTO hp Rating - 45 New Holland Standard Warranty Applies Rotor Drive Type - Chain Drive Protection - Slip Clutch Dealer pickup permitted Rotor 540 rpm PTO - 60 inch & 72 inch Page 96 of 110 -CP1K JAN-18

98 -CP1K 01 MODEL 105A ROTARY TILLER (Shipment from Depots) Models COMMERCIAL MODEL Weight Factory Data List Price 105A 1,000 LB P38 $2, Includes the following Equipment 60 in. Rotary Tiller (715416) $ Factory Supplied Options Order Code Description Weight Factory Data List Price COMPLETING PACKAGES ROTARY TILLER WORKING WIDTH SD_01001 BASE UNIT in. Rotary Tiller ( ) in. Hvy Duty Rotary Tiller ( ) remove P36 $ P66 $1, Page 97 of 110 -CP1K JAN-18

99 -CP2A 01 The WORK EZ EZ Match Quick Hitch is designed to make changing from one 3-point hitch attachment to another quick and EZ! The upper hook easily slips into position and simply lock the lower hooks with quick flip of two handles - many times from the comfort and convenience of the tractor seat. WORK EZ EZ MATCH Canadian Price List (Distribution Center) Standard Equipment Heavy-duty steel construction Lower arms lock automatically Fast, easy attachment and release Designed to ASAE S278.7 Quick Hitch standards MODEL: WORK EZ EZ Match Width (inches) - 28 center to center (Hooks are 1 ⅛ " wide) Many other New Holland products are Height (inches) - 24 quick hitch compatible - rear blades, box Weight (pounds) - 80 blades, landscape rakes, 6 ft Disc and Maximum Horsepower " rear finishing mower. WARRANTY Designed for use on Category 1, 3-point New Holland Standard Warranty Applies hitch tractors and implements Models COMMERCIAL MODEL Weight Factory Data List Price WORK EZ EZ MATCH 400 LB P10 $ Page 98 of 110 -CP2A JAN-18

100 -CP1W 01 Work EZ Box Blades are designed to compliment compact and utility tractors equipped with 3-point hitch. The Light Duty Box Blades are also Work EZ - EZ Match compatible. These box blades are offered as Light Duty for the estate and homeowner. WARRANTY New Holland Standard Warranty Applies LIGHT DUTY WORK EZ BOX BLADES (Distribution Center) Standard Equipment MODEL: EZ48BL MODEL: EZ60BL Application - Light Duty Application - Light Duty Working Width - 48 (in.) Working Width - 60 (in.) Overall Height /2 (in.) Overall Height /2 (in.) Box Depth - 17 (in.) Box Depth- 17 (in.) Tractor Horsepower (Max.) - 30 Tractor Horsepower (Max.) - 35 Hitch - Cat. I Hitch - Cat. I Endplate Thickness - 3/16 (in.) Endplate Thickness - 3/16 (in.) Number of Shanks - 4 Number of Shanks - 5 Cutting Edge - 1/2 x 6 Rev. (in.) Cutting Edge - 1/2 x 6 Rev. (in.) Number of Cutting Edges - 2 Number of Cutting Edges - 2 Shank Adjustment - Manual Shank Adjustment - Manual Hydraulic Lift - n/a Hydraulic Lift - N/A Hinges Rear Flat w/ Cutting Edge - N/A Hinges Rear Flat w/ Cutting Edge - N/A Weight (lbs.) Weight (lbs.) Page 99 of 110 -CP1W JAN-18

101 -CP1W 01 LIGHT DUTY WORK EZ BOX BLADES (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price EZ48BL 363 LB P88 $ EZ60BL 437 LB P26 $1, Factory Supplied Options Order Code Description Weight Factory Data List Price SD_N6433 COATING Galvanized P36 $98.00 Page 100 of 110 -CP1W JAN-18

102 -CP1W 02 STANDARD DUTY WORK EZ BOX BLADES (Distribution Center) Standard Equipment WORK EZ Box Blades are designed MODEL: 72BM to compliment compact and utility Application - Standard Duty tractors equipped with 3-point hitch. Working Width - 72 (in.) These box blades are offered Standard Overall Height - 36 (in.) Duty for the landscaper. Box Depth - 17 (in.) Tractor Horsepower (Max.) - 50 WARRANTY Hitch - Cat. I New Holland Standard Warranty Applies Endplate Thickness - 1/4 (in.) Number of Shanks - 6 MODEL: 60BM Cutting Edge - 1/2 x 6 Rev. (in.) Application - Standard Duty Number of Cutting Edges - 2 Working Width - 60 (in.) Shank Adjustment - Manual Overall Height - 36 (in.) Hydraulic Lift - N/A Box Depth - 17 (in.) Hinges Rear Flat w/ Cutting Edge - N/A Tractor Horsepower (Max.) - 50 Weight (lbs.) Hitch - Cat. I Endplate Thickness - 1/4 (in.) MODEL: 84BM Number of Shanks - 5 Application - Standard Duty Cutting Edge - 1/2 x 6 Rev. (in.) Working Width - 84 (in.) Number of Cutting Edges - 2 Overall Height - 36 (in.) Shank Adjustment - Manual Box Depth - 17 (in.) Hydraulic Lift - N/A Tractor Horsepower (Max.) - 60 Hinges Rear Flat w/ Cutting Edge - N/A Hitch - Cat. I Weight (lbs.) Endplate Thickness - 1/4 (in.) Number of Shanks - 6 Cutting Edge - 1/2 x 6 Rev. (in.) Number of Cutting Edges - 2 Shank Adjustment - Manual Hydraulic Lift - N/A Hinges Rear Flat w/cutting Edge - N/A Weight (lbs.) Page 101 of 110 -CP1W JAN-18

103 -CP1W 02 STANDARD DUTY WORK EZ BOX BLADES (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price 60BM 534 LB P40 $1, BM 643 LB P02 $1, BM 703 LB P28 $1, Factory Supplied Options Order Code Description Weight Factory Data List Price Galvanized P36 $98.00 Page 102 of 110 -CP1W JAN-18

104 -CP1X 01 WORK EZ REAR BLADES - MD (Distribution Center) Standard Equipment WORK EZ Rear Blades are designed to compliment compact, utility and higher H.P. tractors equipped with 3- point hitch. The Medium Duty Rear Blades are also Work EZ - EZ Match compatible. WARRANTY New Holland Standard Warranty Applies MEDIUM DUTY MODEL: EZ60SM Application - Medium Duty Moldboard Width - 60 (in.) Tractor Horsepower (max.) - 40 HP Hitch - Cat. I Cutting Edge - 1/2" X 6" Rev. (in.) Tilt Adjustment - 45 Degr./ E side Offset Adjustment - 12 (in.) Angle Adjustment - 5F/3R Weight (lbs.) MODEL: EZ72SM Application - Medium Duty Moldboard Width - 72 (in.) Tractor Horsepower (max.) - 40 HP Hitch - Cat. I Cutting Edge - 1/2" X 6" Rev. (in.) Tilt Adjustment - 45 Degr./ E side Offset Adjustment - 12 (in.) Angle Adjustment - 5F/3R Weight (lbs.) MODEL: EZ84SM Application - Medium Duty Moldboard Width - 84 (in.) Tractor Horsepower (max.) - 40 HP Hitch - Cat. I Cutting Edge - 1/2" X 6" Rev. 9in.) Tilt Adjustment - 45 Degr./ E side Offset Adjustment - 12 (in.)" Angle Adjustment - 5F/3R Weight (lbs.) Page 103 of 110 -CP1X JAN-18

105 -CP1X 01 WORK EZ REAR BLADES - MD (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price EZ60SM 256 LB P54 $ EZ72SM 328 LB P24 $1, EZ84SM 297 LB P84 $1, Page 104 of 110 -CP1X JAN-18

106 -CP1X 02 WORK EZ REAR BLADES - HD (Distribution Center) Standard Equipment WORK EZ Rear Blades are designed to compliment compact, utility MODEL: 96SH and higher H.P. tractors equipped with Application - Heavy Duty 3- point hitch. These rear blades are Moldboard Width - 96 (in.) offered as Heavy Duty, Heavy Duty Plus Tractor Horsepower (max.) - 65 HP for the contractor or high horsepower Hitch - Cat. I/II owner/operator. Cutting Edge - 1/2" X 6" Rev. (in.) Tilt Adjustment - 30 Degr. WARRANTY Offset Adjustment - 12 (in.) New Holland Standard Warranty Applies Angle Adjustment - 5F/5R Weight (lbs.) HEAVY DUTY MODEL: 84SH Application - Heavy Duty Moldboard Width - 84 (in.) Tractor Horsepower (max.) - 65 HP Hitch - Cat. I/II Cutting Edge - 1/2" X 6" Rev. (in.) Tilt Adjustment - 30 Degr. Offset Adjustment - 12 (in.) Angle Adjustment - 5F/5R Weight (lbs.) Page 105 of 110 -CP1X JAN-18

107 -CP1X 02 WORK EZ REAR BLADES - HD (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price 84SH 684 LB P48 $1, SH 679 LB P16 $1, Page 106 of 110 -CP1X JAN-18

108 -CP1U 01 WORK EZ DISK HARROW (Distribution Center) Standard Equipment WORK EZ Disk Harrow is designed MODEL: EZ78DC to compliment compact and utility Size - 78 (in.) tractors equipped with 3-point hitch and is Work EZ - EZ Match compatible. SPECIFICATIONS: This disk harrow combines overall Cutting Width - 70 (in.) weight and notched blades (front and Tractor Horsepower (max.) - 70 rear) to aggressively cut and turn the Hitch - Cat. I soil, Overall Length - 60 (in.) regardless of residue conditions. Overall Width - 79 (in.) Maximum Cutting Depth - 6 (in.) WARRANTY Number of Disk Blades - 20 Notched New Holland Standard Warranty Applies Blade (front and rear) Disk Blade Size - 18 (in.) diameter Disk Blade Spacing - 5 1/2" F, 6 1/2", 7 1/2" R Bearing Lubrication -Sealed Bearings Weight (lbs.) Models COMMERCIAL MODEL Weight Factory Data List Price EZ78DC 678 LB P92 $2, Page 107 of 110 -CP1U JAN-18

109 -CP1V 01 WORK EZ LANDSCAPE RAKES (Distribution Center) Standard Equipment WORK EZ Landscape Rakes are MODEL SPECIFICATIONS: designed to compliment compact and utility tractors equipped with 3-point EZ72LR hitch and are also Work EZ - EZ Rake Width - 72 (in.) Match compatible. These basic units Rake Height - 15 (in.) offer a choice of angle selection and Hitch - Cat. I provide 1 inch tine spacing for precision Tractor Horsepower (max.) - 50 soil preparation and leveling. Rake Pivot (degrees) Angle - 5 Forward/3 Reverse Pivot King Pin - 1-1/4 (in.) Tine Spacing - 1 (in.) Tine Size - 5/16 x 1 (in.) Tine Material - High Carbon Spring Steel Weight (lbs.) Models COMMERCIAL MODEL Weight Factory Data List Price EZ72LR 269 LB P70 $1, Page 108 of 110 -CP1V JAN-18

110 -CP2B 01 WORK EZ BALE CARRIERS WORK EZ Bale Carriers and Spears are designed to compliment compact and utility tractors equipped with 3-point hitch for handling round and square hay bales. The WORK EZ Bale Carriers and Spears are also Work EZ - EZ Match compatible. WARRANTY New Holland Standard Warranty Applies Standard Equipment MODEL: Work EZ Bale Carrier MODEL: Work EZ Bale Spear Application - Standard duty Application - Standard duty Weight lbs Weight - 98 lbs Weight rating lbs Weight rating lbs Tractor Horsepower (max) - 60 Tractor horsepower (max) - 60 Hitch - Cat. I Hitch - Cat. I Hot dipped galvanized frame Hot dipped galvanized frame NOTE: Fork tines go under bale Replaceable high carbon steel spear Two welded bottom stabilizing spears Models COMMERCIAL MODEL Weight Factory Data List Price WORK EZ BALE CARRIER 88 LB P98 $ WORK EZ BALE SPEAR 155 LB P06 $ Page 109 of 110 -CP2B JAN-18

111 -CP2B 02 WORK EZ HAY SPEARS WORK EZ Hay Spears are designed to compliment most tractors and skid steers that are Universal Quick Hitch Compatible for handling round and square hay bales. WARRANTY New Holland Standard Warranty Applies Standard Equipment MODEL: Work EZ Single Bale Quick MODEL: Work EZ Double Bale Quick Attach Attach Application - Standard duty Application - Standard duty Weight lbs Weight lbs Weight rating lbs Weight rating lbs Tractor Horsepower (max) - 80 Tractor Horsepower (max) - 80 Hitch - Universal Q/A Hitch - Universal Q/A Hot dipped galvanized frame Hot dipped galvanized frame Replaceable high carbon steel spear Two replaceable high carbon steel Two welded bottom stabilizing spears spears One welded top stabilizing spear Models COMMERCIAL MODEL Weight Factory Data List Price WORK EZ DBL BALE QA 153 LB P74 $ WORK EZ SNGL BALE QA 168 LB P98 $ Page 110 of 110 -CP2B JAN-18