ZETOR This supplement to the Operation Manual will introduce you to divergence of operation and maintenance of Forterra series tractor with

Transcription

1

2

3 ZETOR This supplement to the Operation Manual will introduce you to divergence of operation and maintenance of Forterra series tractor with four-cylinder engine and tilting bonnet. The FORTERRA series was extended by model FORTERRA 135 with 95 kw engine conforming TIER III emission standard. Although many of you are well experienced in operation of other tractors, please read this supplement as well as the existing operation manual carefully. We are sure that you will find many pieces of new information and that you will get a perfect overview of methods you can apply for the best utilisation of our product for the most diverse purposes. If you attain to the specified principles of operation and maintenance of the tractor, and observe the safety rules of driving, the new tractor that you have got will become your reliable and long-term assistant and partner. The manufacturer of the tractor has the pleasure of wishing you thousands of hours of work accomplished to your full satisfaction. ZETOR Brno 3

4 The specified technical data, design, outfit, material, and visual aspects are in force at the moment of impression. The manufacturer reserves the right to modifications. 4

5 Page ACQUAINTANCE WITH THE TRACTOR... 7 * Adjustable steering wheel... 7 * Tiltable and extensible steering wheel... 7 Selectors, switches and levers... 8 DRIVE OF AGRICULTURAL MACHINES... 9 Rear PTO... 9 HYDRAULIC SYSTEM *Quick-couplers with drip collection BALLAST WEIGHTS Weights of the front three-point hitch MAINTENANCE INSTRUCTIONS Opening the hood Brake liquid replenishment Oil tank of hydrostatic steering TRACTOR MAINTENANCE Steps performed outside the interval of 500 hours of work, Forterra 135, engine Front PTO oil Oil for transmission systems of the tractors Oil for the front driving axle Oil for the hydrostatic steering of the tractors Plastic lubricant for the tractor Hydraulic brake liquid for the tractors MAIN TECHNICAL PARAMETERS Technical data of tractors FORTERRA Load-bearing capacities of the rear tyres Load-bearing capacities of the front tyres Permitted combinations of wheels for tractors Power TABLE OF CONTENTS 5 Lifting force of the three-point hitch...23 Index... 25

6 6

7 ACQUAINTANCE WITH THE TRACTOR W1 * ADJUSTABLE STEERING WHEEL Steering wheel angle adjustment The adjustment is done by tilting the steering wheel after releasing the lock by turning the lever (1) in the arrow direction. After setting the steering wheel lock the lever (1) by tightening against the arrow direction. F205 * TILTABLE AND EXTENSIBLE STEERING WHEEL The tilting steering column allows variable angle and height adjustment of the steering wheel. Steering wheel height adjustment The adjustment is done by extending or retracting the steering wheel after releasing the lock by turning the lever (1) in the arrow direction. After setting the steering wheel lock the lever (1) by tightening against the arrow direction. Steering wheel angle adjustment The adjustment is done by tilting the steering wheel after releasing the lock by turning the lever (2) in the arrow direction. After setting the steering wheel lock the lever (2) by tightening against the arrow direction. 7

8 ACQUAINTANCE WITH THE TRACTOR SELECTORS, SWITCHES AND LEVERS a - Light switch (off, parking, main headlights) b - Selector of low beam lights in the tractor grill and working lights on the tractor cab. c - Fog light switch (off - on). The function of the fog light is indicated by the illuminated symbol on the switch. d - Working headlight switch (off - on). The function of the working headlight is indicated by the illuminated symbol on the switch. e - Warning light switch f - Switch of the front driving axle. Engaged front driving axle is indicated by the illuminated symbol on the switch. g - Beacon switch (off - on). h - Work light switch in the bonnet mask (off - on) i - Torque multiplier preselection switch j - Differential lock button k - Stopping the engine run (stopping device) l - Selector of turn signal, low and high beam lights and the acoustic and light warning signal m - Switching box WXF101 8

9 DRIVE OF AGRICULTURAL MACHINES W5 REAR PTO Identification of revolutions 750/1000 changes to 540E/1000, the parameters remain unchanged. 9

10 HYDRAULIC SYSTEM W4 *QUICK-COUPLERS WITH DRIP COLLECTION Optionally, a drip collection system may be installed to catch residual oil. Regularly check whether the tank is not full; if necessary, dispose of the oil in an environment-friendly way. 10

11 BALLAST WEIGHTS WEIGHTS OF THE FRONT THREE- POINT HITCH Material Ballast weights (kg) concrete 290 iron 460 W6 11

12 MAINTENANCE INSTRUCTIONS OPENING THE HOOD Opening the hood: Disengage the hood by pulling the draw bar (1) in the direction of arrow. Hold and lift up the bonnet. The bonnet will open automatically thanks to gas brace. The hood is locked in this lifted position thanks to this gas-liquid brace. Closing the hood: Pull the hood down with the strap, grasp it in the place of arrows and press it downwards until the hood lock snaps. Do not use excessive force to close the front hood as the filaments of headlight bulbs situated in the front hood might get damaged. W2 D401 W3 BRAKE LIQUID REPLENISHMENT The tank is accessible after opening the bonnet by the cab on the tractor left hand side. Maintain the brake liquid level in the range of 3/4 of the tank content (max. level) and 1/2 of the tank content (minimum level). When handling brake liquid, keep absolute cleanness. Check the brake liquid level daily before starting your work. OIL TANK OF HYDROSTATIC STEERING The tank is accessible after opening the bonnet. It is located in the front left hand side of the tractor. Using the oil-gauge rod (A) check level of oil in the hydrostatic steering tank; keep the level between the marks MIN. and MAX., see Fig. (A). After removing the nut (1) and tank lid refill oil as necessary. 12

13 TRACTOR MAINTENANCE STEPS PERFORMED OUTSIDE THE INTERVAL OF 500 HOURS OF WORK, FORTERRA 135, ENGINE 1605 in a new tractor or tractor after a general overhaul hour counter reading subsequently after every hours Check and adjust valve play o o 2000 Check the opening pressure of injectors and the function of injection nozzles Replace the hydrostatic steering hoses o 3000 every 3500 hours or once every 4 years Check the toe-in of the front wheels o

14 TRACTOR MAINTENANCE FRONT PTO OIL Manufacturer Oil designation Shell Donax TX BP Autran DX III Fluid 9 Esso ATF E Castrol Transmax S Elf Elfmatic G2 Syn Elfmatic G3 FINA Finamatic HP Finamatic S6726 Mobil Mobil ATF Texaco Texamatic 7045 Valvoline ATF Dextron II-E Beverol Dextron II-E (Fina)matic HP JD Hygard JDMJ 20C Total Fluide AT42 Fluidematic Syn MOL ATF 3G 14

15 TRACTOR MAINTENANCE OIL FOR TRANSMISSION SYSTEMS OF THE TRACTORS TAB. 2 Manufacturer Oil designation Viscosity class SAE Performance class API Shell Shell Donax TD 80W GL-4 Shell spirax GX 80W GL-4 Aral EP 80 80W GL-4 Fluid HGS 80W GL-4 Super Traktoral 10W - 30 GL-4 Esso Torque Fluid 62 80W GL-4 Paramo Pardubice Mogul Trans 80 80W GL-4 Mogul Traktol UTTO/EKO 80W GL-4 Gyrol - UTTO 80W GL-4 Gyrol 80W 80W GL-4 ÖMV Austromatic HGN 80W GL-4 Gear Oil EC 4 80W - 85 GL-4 Austrotrac 10W - 40 GL-4 Austrotrac 10W - 30 GL-4 Fuchs Titan Hydramot 1030MC 10W - 30 GL-4 Renolin G W GL-4 MOL Farm NH Ultra (UTTO) 80W GL-4 ORLEN OIL Hipol 6 80W GL-4 15

16 TRACTOR MAINTENANCE OIL FOR THE FRONT DRIVING AXLE Manufacturer Oil designation Viscosity class SAE Performance class API Shell Spirax AX 80W - 90 GL-5 Aral Fluid HGS 80W GL-4 Agip Rotra Multi THT 80W GL-4 Esso Torque Fluid 62 80W GL-4 Fuchs Titan Supergear 80W - 90 GL-4/GL-5 Titan Hydramot 1030MC 10W - 30 GL-4 Titan Renep 8090MC 80W - 90 GL-4/GL-5 ÖMV Gear Oil LS 85W - 90 GL-5 MOL Hykomol K 80W-90 80W - 90 GL-5 ORLEN OIL Platinum Gear 80W-90 80W - 90 GL-5 OIL FOR THE HYDROSTATIC STEERING OF THE TRACTORS Manufacturer Oil designation Classification Shell TELLUS DO 32 HLP DIN Aral Vitam DE 32 HLP DIN Fuchs RENOLIND10VG32 HLP DIN ÖMV Hyd HLP 32 HLP DIN PARAMO MOGUL H-LPD 32 HLP DIN MOGUL HM 32 HLP DIN MOL Hydro HV 32 HVLP DIN ORLEN OIL Hydrol L-HM 32 HLP DIN Hydrol L-HM 46 HLP DIN

17 TRACTOR MAINTENANCE PLASTIC LUBRICANT FOR THE TRACTOR Type Classification Shell retinax HD2 DIN KP 2 K-20 MOGUL LA 2 ISO 6743/9 CCEB 2/3, ISO - L - XBCEA 2 MOGUL LV 2M ISO 6743/9 CCEB 2/3 ÖMV signum DIN K 2 C-30 MOL Liton LT 2EP ORLEN OIL Liten Premium ŁT-4 EP2 HYDRAULIC BRAKE LIQUID FOR THE TRACTORS Type Classification Shell Donax YB SAE J 1703, ISO 4925 Synthol 205 PND , ISO 4925, SAE - J 1703 Fuchs Stopred SAE - J 1703 Brake Fluid DOT 4 ISO 4925, SAE - J 1703 EVOX DOT 4+ ISO 4925/4 SAE - J 1704 CAUTION! The liquid is not designed for arctic conditions! Replace the brake liquid once every two years regardless of the number of hours of work! Liquids of the same classification can be mixed together. 17

18 TECHNICAL DATA OF TRACTORS FORTERRA 135 MAIN TECHNICAL PARAMETERS Tractor type FORTERRA 135 Engine type Z 1605 Engine kind Diesel four-stroke, supercharged engine with intercooler of filling air Engine design in-line, vertical, water cooled Number of cylinders 4 Displacement cm Bore x stroke mm 105x120 Nominal speed ot/min 2200 Injection sequence Compression ratio 17,8 : 1 Max. overspeed ot/min 2460 Idle speed ot/min 800 ± 25 Net power at the nominal speed kw 95 Fuel consumption at the nominal engine speed (2200 rpm) g.kw -1.h Max. torque (1,480 rpm) Nm 570 Inclination Mt % 35 Fuel consumption at the maximum torque (1,480 rpm) g.kw -1.h Engine lubrication pressurized with a Gerotor pump Maximum consumption of oil after 100 hours of engine running-in g.kw -1.h -1 0,7 Oil pressure at the nominal engine speed and the oil temperature of MPa 0,3 0,5 95 C Minimum oil pressure at the engine speed of 800 rpm and oil temperature MPa 0,08 of 80 C Max. coolant temperature C 106 Timing type OHV 18

19 TECHNICAL DATA OF TRACTORS FORTERRA 135 MAIN TECHNICAL PARAMETERS Tractor type FORTERRA 135 Engine type Z 1605 Fuel cleaner Injection pump type PP4M10P1i 4352 Nozzle type DOP150P VA99P Injector opening pressure MPa 30+1 Timing angle 11 Valve clearance with the engine cold suction exhaust valve bridge clearance mm mm mm Single-stage with a replaceable element 0,25±0,05 0,25±0,05 0,05 19

20 MAIN TECHNICAL PARAMETERS LOAD-BEARING CAPACITIES OF THE REAR TYRES Tyre dimensions Travelling speed 40 km.h km.h km.h -1 8 km.h -1 Tyre load-bearing capacity (kg) Tyre load-bearing capacity (kg) Tyre load-bearing capacity (kg) Tyre load-bearing capacity (kg) Tyre Inflation 1 pc Tyre Inflation 1 pc Tyre Tyre Inflation 1 pc Axle Axle Axle 1 pc Axle (kpa) (kpa) (kpa) 16, ,9R , ,4R , ,9R , ,4R /70R /70R /65R Tyre 1 pc 20

21 MAIN TECHNICAL PARAMETERS LOAD-BEARING CAPACITIES OF THE FRONT TYRES Travelling speed 40 km.h km.h km.h -1 8 km.h -1 Tyre load-bearing Tyre load-bearing Tyre load-bearing capacity capacity capacity (kg) (kg) (kg) Tyre load-bearing capacity (kg) Tyre 1 pc Axle Tyre 1 pc Axle Tyre dimensions Inflation (kpa) Inflation (kpa) Tyre 1 pc Axle Tyre 1 pc Axle Inflation (kpa) 12, ,4R , PR ,6R , ,9R /70R /70R Tyre 1 pc 21

22 MAIN TECHNICAL PARAMETERS PERMITTED COMBINATIONS OF WHEELS FOR TRACTORS Front wheels Tyre dimensions Equivalent 12,4R24 12, ,6R24 380/70R24 12, /70 R24 14,9R24 14,9-24 Rear wheels Tyre dimensions Equivalent 18,4R34 18, ,9R38 480/70R38 18,4R34 18, ,9R38 480/70R38 18,4R38 18, /70R38 600/65R38 18,4R38 18, /70R38 600/65R38 16,9R38 480/70R38 22

23 MAIN TECHNICAL PARAMETERS POWER Tractor type FORTERRA 135 Engine type (TIER III) Z 1605 PTO power (kw±2%) at the nominal engine speed and engaged 1000 rpm of the PTO Engine in the running-in stage (until 100 hours) 78 Engine after the running-in stage (from 100 hours on) 82 LIFTING FORCE OF THE THREE-POINT HITCH Lifting force at the end of the bottom draw-bars of the rear three-point hitch in the whole lifting range at the maximum 48,4 usable pressure, with the auxiliary cylinder (kn) Lifting force at the end of the lower draw-bars of the front three-point hitch in the whole lifting range at the maximum 35 usable pressure (kn) - Zuidberg front three-point hitch 23

24 24

25 INDEX A Acquaintance with the tractor 8 Adjustable steering wheel 8 B Ballast weights 12 Brake liquid replenishment 13 D Drive of agricultural machines 10 F Front pto oil 15 L Lifting force of the three-point hitch 24 Load-bearing capacities of the front tyres 22 Load-bearing capacities of the rear tyres 21 M Main technical parameters 19 Maintenance instructions 13 O Oil for the front driving axle 17 Oil for the hydrostatic steering of the tractors 17 Oil for transmission systems of the tractors 16 Oil tank of hydrostatic steering 13 Opening the hood 13 P Permitted combinations of wheels for tractors 23 Plastic lubricant for the tractor 18 Power 24 Q Quick-couplers with drip collection 11 U Rear PTO 10 S Selectors, switches and levers 9 Steps performed outside the interval of 500 hours of work, forterra 135, engine T Technical data of tractors forterra Tiltable and extensible steering wheel 8 Tractor maintenance 14 W Weights of the front three-point hitch 12 25

26 Operator's manual - supplement Forterra 95 Forterra 105 Forterra 115 Forterra 125 Forterra 135 Edition: I Publication No. : Zetor Tractors s.r.o. Department of Technical Documentation Trnkova

27